'struct qcom_cc_desc' is passed to qcom_cc_map() and
qcom_cc_really_probe() only as pointer to const, so make the memory
const for safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250228-clk-qcom-const-v1-4-611ab80d45e4@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
A recent change in the venus driver results in a stuck clock on the
Lenovo ThinkPad X13s, for example, when streaming video in firefox:
video_cc_mvs0_clk status stuck at 'off'
WARNING: CPU: 6 PID: 2885 at drivers/clk/qcom/clk-branch.c:87 clk_branch_wait+0x144/0x15c
...
Call trace:
clk_branch_wait+0x144/0x15c
clk_branch2_enable+0x30/0x40
clk_core_enable+0xd8/0x29c
clk_enable+0x2c/0x4c
vcodec_clks_enable.isra.0+0x94/0xd8 [venus_core]
coreid_power_v4+0x464/0x628 [venus_core]
vdec_start_streaming+0xc4/0x510 [venus_dec]
vb2_start_streaming+0x6c/0x180 [videobuf2_common]
vb2_core_streamon+0x120/0x1dc [videobuf2_common]
vb2_streamon+0x1c/0x6c [videobuf2_v4l2]
v4l2_m2m_ioctl_streamon+0x30/0x80 [v4l2_mem2mem]
v4l_streamon+0x24/0x30 [videodev]
using the out-of-tree sm8350/sc8280xp venus support. [1]
Update also the sm8350/sc8280xp GDSC definitions so that the hw control
mode can be changed at runtime as the venus driver now requires.
Fixes: ec9a652e51 ("venus: pm_helpers: Use dev_pm_genpd_set_hwmode to switch GDSC mode on V6")
Link: https://lore.kernel.org/lkml/20230731-topic-8280_venus-v1-0-8c8bbe1983a5@linaro.org/ # [1]
Cc: Jagadeesh Kona <quic_jkona@quicinc.com>
Cc: Taniya Das <quic_tdas@quicinc.com>
Cc: Abel Vesa <abel.vesa@linaro.org>
Cc: Konrad Dybcio <konradybcio@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Link: https://lore.kernel.org/r/20240901093024.18841-1-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The previous wrapper qcom_cc_really_probe takes the platform
device as parameter, which is limited to platform driver.
As for qca8k clock controller driver, which is registered as
the MDIO device, which also follows the qcom clock framework.
To commonize qcom_cc_really_probe, updating it to take the
struct device as parameter, so that the qcom_cc_really_probe
can be utilized by the previous platform device and the new
added MDIO device.
Also update the current clock controller drivers to take
&pdev->dev as parameter when calling qcom_cc_really_probe.
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Link: https://lore.kernel.org/r/20240605124541.2711467-4-quic_luoj@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Instead of magically poking at the bit0 of branch clocks' CBCR, use
the newly introduced helper.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240212-topic-clk_branch_en-v7-2-5b79eb7278b2@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
SC8280XP, being a partial derivative of SM8350, shares almost the exact
same videocc block. Extend the 8350 driver to support the bigger brother.
The only notable changes are higher possible frequencies on some clocks
and some switcheroo within the XO/sleep registers (probably due to some
different board crystal configuration).
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230703-topic-8280_videocc-v2-2-c88269806269@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
