SDM845 has "General Purpose" clocks that can be muxed to
SoC pins to clock various external devices.
Those clocks may be used as e.g. PWM sources for external peripherals.
GPCLK can in theory have arbitrary value depending on the use case, so
the concept of frequency tables, used in rcg2 clock driver, is not
efficient, because it allows only defined frequencies.
Introduce clk_rcg2_gp_ops, which automatically calculate clock
mnd values for arbitrary clock rate. The calculation done as follows:
- upon determine rate request, we calculate m/n/pre_div as follows:
- find parent(from our client's assigned-clock-parent) rate
- find scaled rates by dividing rates on its greatest common divisor
- assign requested scaled rate to m
- factorize scaled parent rate, put multipliers to n till max value
(determined by mnd_width)
- validate calculated values with *_width:
- if doesn't fit, delete divisor and multiplier by 2 until fit
- return determined rate
Limitations:
- The driver doesn't select a parent clock (it may be selected by client
in device tree with assigned-clocks, assigned-clock-parents properties)
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Link: https://lore.kernel.org/r/20241118-starqltechn_integration_upstream-v8-3-ac8e36a3aa65@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
__clk_rcg2_configure function does 2 things -
configures parent and mnd values. In order to
be able to add new clock options, we should split.
Move __clk_rcg2_configure logic on 2 functions:
- __clk_rcg2_configure_parent which configures clock parent
- __clk_rcg2_configure_mnd which configures mnd values
__clk_rcg2_configure delegates to mentioned functions.
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Link: https://lore.kernel.org/r/20241118-starqltechn_integration_upstream-v8-2-ac8e36a3aa65@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Generally SDCC clocks use clk_rcg2_floor_ops, however on SAR2130P
platform it's recommended to use rcg2_shared_ops for all Root Clock
Generators to park them instead of disabling. Implement a mix of those,
clk_rcg2_shared_floor_ops.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241027-sar2130p-clocks-v5-6-ecad2a1432ba@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Amit Pundir reports that audio and USB-C host mode stops working if the
gcc_usb30_prim_master_clk_src clk is registered and
clk_rcg2_shared_init() parks it on XO. Skip parking this clk at
registration time to fix those issues.
Partially revert commit 01a0a6cc8c ("clk: qcom: Park shared RCGs upon
registration") by skipping the parking bit for this clk, but keep the
part where we cache the config register. That's still necessary to
figure out the true parent of the clk at registration time.
Fixes: 01a0a6cc8c ("clk: qcom: Park shared RCGs upon registration")
Fixes: 929c75d575 ("clk: qcom: gcc-sm8550: Mark RCGs shared where applicable")
Cc: Konrad Dybcio <konradybcio@kernel.org>
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Taniya Das <quic_tdas@quicinc.com>
Reported-by: Amit Pundir <amit.pundir@linaro.org>
Closes: https://lore.kernel.org/CAMi1Hd1KQBE4kKUdAn8E5FV+BiKzuv+8FoyWQrrTHPDoYTuhgA@mail.gmail.com
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20240819233628.2074654-3-swboyd@chromium.org
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
There's two problems with shared RCGs.
The first problem is that they incorrectly report the parent after
commit 703db1f5da ("clk: qcom: rcg2: Cache CFG register updates for
parked RCGs"). That's because the cached CFG register value needs to be
populated when the clk is registered. clk_rcg2_shared_enable() writes
the cached CFG register value 'parked_cfg'. This value is initially zero
due to static initializers. If a driver calls clk_enable() before
setting a rate or parent, it will set the parent to '0' which is
(almost?) always XO, and may not reflect the parent at registration. In
the worst case, this switches the RCG from sourcing a fast PLL to the
slow crystal speed.
The second problem is that the force enable bit isn't cleared. The force
enable bit is only used during parking and unparking of shared RCGs.
Otherwise it shouldn't be set because it keeps the RCG enabled even when
all the branches on the output of the RCG are disabled (the hardware has
a feedback mechanism so that any child branches keep the RCG enabled
when the branch enable bit is set). This problem wastes power if the clk
is unused, and is harmful in the case that the clk framework disables
the parent of the force enabled RCG. In the latter case, the GDSC the
shared RCG is associated with will get wedged if the RCG's source clk is
disabled and the GDSC tries to enable the RCG to do "housekeeping" while
powering on.
Both of these problems combined with incorrect runtime PM usage in the
display driver lead to a black screen on Qualcomm sc7180 Trogdor
chromebooks. What happens is that the bootloader leaves the
'disp_cc_mdss_rot_clk' enabled and the 'disp_cc_mdss_rot_clk_src' force
enabled and parented to 'disp_cc_pll0'. The mdss driver probes and
runtime suspends, disabling the mdss_gdsc which uses the
'disp_cc_mdss_rot_clk_src' for "housekeeping". The
'disp_cc_mdss_rot_clk' is disabled during late init because the clk is
unused, but the parent 'disp_cc_mdss_rot_clk_src' is still force enabled
because the force enable bit was never cleared. Then 'disp_cc_pll0' is
disabled because it is also unused. That's because the clk framework
believes the parent of the RCG is XO when it isn't. A child device of
the mdss device (e.g. DSI) runtime resumes mdss which powers on the
mdss_gdsc. This wedges the GDSC because 'disp_cc_mdss_rot_clk_src' is
parented to 'disp_cc_pll0' and that PLL is off. With the GDSC wedged,
mdss_runtime_resume() tries to enable 'disp_cc_mdss_mdp_clk' but it
can't because the GDSC has wedged all the clks associated with the GDSC
causing clks to stay stuck off.
This leads to the following warning seen at boot and a black screen
because the display driver fails to probe.
disp_cc_mdss_mdp_clk status stuck at 'off'
WARNING: CPU: 1 PID: 81 at drivers/clk/qcom/clk-branch.c:87 clk_branch_toggle+0x114/0x168
Modules linked in:
CPU: 1 PID: 81 Comm: kworker/u16:4 Not tainted 6.7.0-g0dd3ee311255 #1 f5757d475795053fd2ad52247a070cd50dd046f2
Hardware name: Google Lazor (rev1 - 2) with LTE (DT)
Workqueue: events_unbound deferred_probe_work_func
pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : clk_branch_toggle+0x114/0x168
lr : clk_branch_toggle+0x110/0x168
sp : ffffffc08084b670
pmr_save: 00000060
x29: ffffffc08084b680 x28: ffffff808006de00 x27: 0000000000000001
x26: ffffff8080dbd4f4 x25: 0000000000000000 x24: 0000000000000000
x23: 0000000000000000 x22: ffffffd838461198 x21: ffffffd838007997
x20: ffffffd837541d5c x19: 0000000000000001 x18: 0000000000000004
x17: 0000000000000000 x16: 0000000000000010 x15: ffffffd837070fac
x14: 0000000000000003 x13: 0000000000000004 x12: 0000000000000001
x11: c0000000ffffdfff x10: ffffffd838347aa0 x9 : 08dadf92e516c000
x8 : 08dadf92e516c000 x7 : 0000000000000000 x6 : 0000000000000027
x5 : ffffffd8385a61f2 x4 : 0000000000000000 x3 : ffffffc08084b398
x2 : ffffffc08084b3a0 x1 : 00000000ffffdfff x0 : 00000000fffffff0
Call trace:
clk_branch_toggle+0x114/0x168
clk_branch2_enable+0x24/0x30
clk_core_enable+0x5c/0x1c8
clk_enable+0x38/0x58
clk_bulk_enable+0x40/0xb0
mdss_runtime_resume+0x68/0x258
pm_generic_runtime_resume+0x30/0x44
__genpd_runtime_resume+0x30/0x80
genpd_runtime_resume+0x124/0x214
__rpm_callback+0x7c/0x15c
rpm_callback+0x30/0x88
rpm_resume+0x390/0x4d8
rpm_resume+0x43c/0x4d8
__pm_runtime_resume+0x54/0x98
__device_attach+0xe0/0x170
device_initial_probe+0x1c/0x28
bus_probe_device+0x48/0xa4
device_add+0x52c/0x6fc
mipi_dsi_device_register_full+0x104/0x1a8
devm_mipi_dsi_device_register_full+0x28/0x78
ti_sn_bridge_probe+0x1dc/0x2bc
auxiliary_bus_probe+0x4c/0x94
really_probe+0xf8/0x270
__driver_probe_device+0xa8/0x130
driver_probe_device+0x44/0x104
__device_attach_driver+0xa4/0xcc
bus_for_each_drv+0x94/0xe8
__device_attach+0xf8/0x170
device_initial_probe+0x1c/0x28
bus_probe_device+0x48/0xa4
deferred_probe_work_func+0x9c/0xd8
Fix these problems by parking shared RCGs at boot. This will properly
initialize the parked_cfg struct member so that the parent is reported
properly and ensure that the clk won't get stuck on or off because the
RCG is parented to the safe source (XO).
Fixes: 703db1f5da ("clk: qcom: rcg2: Cache CFG register updates for parked RCGs")
Reported-by: Stephen Boyd <sboyd@kernel.org>
Closes: https://lore.kernel.org/r/1290a5a0f7f584fcce722eeb2a1fd898.sboyd@kernel.org
Closes: https://issuetracker.google.com/319956935
Reported-by: Laura Nao <laura.nao@collabora.com>
Closes: https://lore.kernel.org/r/20231218091806.7155-1-laura.nao@collabora.com
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Taniya Das <quic_tdas@quicinc.com>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20240502224703.103150-1-swboyd@chromium.org
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Some RCG frequency can be reached by multiple configuration.
Add clk_rcg2_fm_ops ops to support these special RCG configurations.
These alternative ops will select the frequency using a CEIL policy.
When the correct frequency is found, the correct config is selected by
calculating the final rate (by checking the defined parent and values
in the config that is being checked) and deciding based on the one that
is less different than the requested one.
These check are skipped if there is just one config for the requested
freq.
qcom_find_freq_multi is added to search the freq with the new struct
freq_multi_tbl.
__clk_rcg2_select_conf is used to select the correct conf by simulating
the final clock.
If a conf can't be found due to parent not reachable, a WARN is printed
and -EINVAL is returned.
Tested-by: Wei Lei <quic_leiwei@quicinc.com>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20231220221724.3822-3-ansuelsmth@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
If the parent clock rate is greater than unsigned long max/2 then
integer overflow happens when calculating the clock rate on 32-bit systems.
As RCG2 uses half integer dividers, the clock rate is first being
multiplied by 2 which will overflow the unsigned long max value.
Hence, replace the common pattern of doing 64-bit multiplication
and then a do_div() call with simpler mult_frac call.
Fixes: bcd61c0f53 ("clk: qcom: Add support for root clock generators (RCGs)")
Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Link: https://lore.kernel.org/r/20230901073640.4973-1-quic_devipriy@quicinc.com
[bjorn: Also drop unnecessary {} around single statements]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Certain SoCs use the HW_CLK_CTRL feature on some of the clocks they
host. This allows the clocks to be turned on automatically when a
downstream branch tries to change rate or config.
Make it togglable so that we can utilize this.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230517-topic-waipio-gpucc-v1-2-4f40e282af1d@linaro.org
- Various clk rate range fixes
- Drop clk rate range constraints on clk_put() (redux)
* clk-rate-range: (28 commits)
clk: mediatek: clk-mux: Add .determine_rate() callback
clk: tests: Add tests for notifiers
clk: Update req_rate on __clk_recalc_rates()
clk: tests: Add missing test case for ranges
clk: qcom: clk-rcg2: Take clock boundaries into consideration for gfx3d
clk: Introduce the clk_hw_get_rate_range function
clk: Zero the clk_rate_request structure
clk: Stop forwarding clk_rate_requests to the parent
clk: Constify clk_has_parent()
clk: Introduce clk_core_has_parent()
clk: Switch from __clk_determine_rate to clk_core_round_rate_nolock
clk: Add our request boundaries in clk_core_init_rate_req
clk: Introduce clk_hw_init_rate_request()
clk: Move clk_core_init_rate_req() from clk_core_round_rate_nolock() to its caller
clk: Change clk_core_init_rate_req prototype
clk: Set req_rate on reparenting
clk: Take into account uncached clocks in clk_set_rate_range()
clk: tests: Add some tests for orphan with multiple parents
clk: tests: Add tests for mux with multiple parents
clk: tests: Add tests for single parent mux
...
An RCG may act as a mux that switch between 2 parents.
This is the case on IPQ6018 and IPQ8074 where the APCS core clk that feeds
the CPU cluster clock just switches between XO and the PLL that feeds it.
Add the required ops to add support for this special configuration and use
the generic mux function to determine the rate.
This way we dont have to keep a essentially dummy frequency table to use
RCG2 as a mux.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220818220628.339366-1-robimarko@gmail.com
The gfx3d clock is hand-crafting its own clk_rate_request in
clk_gfx3d_determine_rate to pass to the parent of that clock.
However, since the clk_rate_request is zero'd at creation, it will have
a max_rate of 0 which will break any code depending on the clock
boundaries.
That includes the recent commit 948fb0969e ("clk: Always clamp the
rounded rate") which will clamp the rate given to clk_round_rate() to
the current clock boundaries.
For the gfx3d clock, it means that since both the min_rate and max_rate
fields are set at zero, clk_round_rate() now always return 0.
Let's initialize the min_rate and max_rate fields properly for that
clock.
Fixes: 948fb0969e ("clk: Always clamp the rounded rate")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220816112530.1837489-25-maxime@cerno.tech
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Sometimes calculation of d value may result in 0 because of the
rounding after integer division. This causes the following error:
[ 113.969689] camss_gp1_clk_src: rcg didn't update its configuration.
[ 113.969754] WARNING: CPU: 3 PID: 35 at drivers/clk/qcom/clk-rcg2.c:122 update_config+0xc8/0xdc
Make sure that D value is never zero.
Fixes: 7f891faf59 ("clk: qcom: clk-rcg2: Add support for duty-cycle for RCG")
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220612145955.385787-3-nikita@trvn.ru
In cases when MND is not enabled (e.g. when only Half Integer Divider is
used), setting D registers makes no effect.
Fail instead of making ineffective write.
Fixes: 7f891faf59 ("clk: qcom: clk-rcg2: Add support for duty-cycle for RCG")
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220612145955.385787-2-nikita@trvn.ru
framework that simplifies a runtime PM call. Otherwise the majority of the diff
falls to a few SoC drivers: Qualcomm, STM32 and MediaTek. Those SoCs gain some
new hardware support and what comes along with that is quite a few lines of
data and some clk_ops code. Beyond the new hardware support we have the usual
pile of driver updates that add missing clks on already supported SoCs or fix
up problems like bad clk tree descriptions. It's nice to see that more drivers
are moving to clk_hw based APIs too.
New Drivers:
- Add STM32MP13 RCC driver (Reset Clock Controller)
- MediaTek MT8186 SoC clk support
- Airoha EN7523 SoC system clocks
- Clock driver for exynosautov9 SoC
- Renesas R-Car V4H and RZ/V2M SoCs
- Renesas RZ/G2UL SoC
- LPASS clk driver for Qualcomm sc7280 SoC
- GCC clk driver for Qualcomm SC8280XP SoC
Updates:
- SDCC uses floor clk ops on Qualcomm MSM8976
- Add modem reset and fix RPM clks on Qualcomm MSM8976
- Add the two missing CLKOUT clocks for U8500/DB8500 SoC
- Mark some clks critical on Ingenic X1000
- Convert ux500 to clk_hw
- Move MediaTek driver to clk_hw provider APIs
- Use i2c driver probe_new to avoid id scans
- Convert a number of Rockchip dt bindings to YAML
- Mark hclk_vo critical on Rockchip rk3568
- Use pm_runtime_resume_and_get to fix pm_runtime_get_sync() usage
- Various cleanups like memory allocation error checks and plugged leaks
- Allwinner H6 RTC clock support
- Allwinner H616 32 kHz clock support
- Add the Universal Flash Storage clock on Renesas R-Car S4-8
- Add I2C, SSIF-2 (sound), USB, CANFD, OSTM (timer), WDT, SPI Multi
I/O Bus, RSPI, TSU (thermal), and ADC clocks and resets on Renesas RZ/G2UL
- Add display clock support on Renesas RZ/G2L
- Add RPC (QSPI/HyperFlash) clocks on Renesas R-Car E3 and D3
- Add 27 MHz phy PLL ref clock on i.MX
- Add mcore_booted module parameter to tell kernel M core has already booted
for i.MX
- Remove snvs clock on i.MX because it was for secure world only
- Add dt bindings for i.MX8MN GPT
- Add DISP2 pixel clock for i.MX8MP
- Add clkout1/2 for i.MX8MP
- Fix parent clock of ubs_root_clk for i.MX8MP
- Implement better RCG parking on Qualcomm SoCs using the shared RCG clk ops
- Kerneldoc fixes
- Switch Tegra BPMP to determine_rate clk op
- Add a pointer to dt schema for generic clock bindings
-----BEGIN PGP SIGNATURE-----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=7lBA
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"Mainly driver updates this time around.
There's a single patch to the core clk framework that simplifies a
runtime PM call. Otherwise the majority of the diff falls to a few SoC
drivers: Qualcomm, STM32 and MediaTek. Those SoCs gain some new
hardware support and what comes along with that is quite a few lines
of data and some clk_ops code.
Beyond the new hardware support we have the usual pile of driver
updates that add missing clks on already supported SoCs or fix up
problems like bad clk tree descriptions. It's nice to see that more
drivers are moving to clk_hw based APIs too.
New Drivers:
- Add STM32MP13 RCC driver (Reset Clock Controller)
- MediaTek MT8186 SoC clk support
- Airoha EN7523 SoC system clocks
- Clock driver for exynosautov9 SoC
- Renesas R-Car V4H and RZ/V2M SoCs
- Renesas RZ/G2UL SoC
- LPASS clk driver for Qualcomm sc7280 SoC
- GCC clk driver for Qualcomm SC8280XP SoC
Updates:
- SDCC uses floor clk ops on Qualcomm MSM8976
- Add modem reset and fix RPM clks on Qualcomm MSM8976
- Add the two missing CLKOUT clocks for U8500/DB8500 SoC
- Mark some clks critical on Ingenic X1000
- Convert ux500 to clk_hw
- Move MediaTek driver to clk_hw provider APIs
- Use i2c driver probe_new to avoid id scans
- Convert a number of Rockchip dt bindings to YAML
- Mark hclk_vo critical on Rockchip rk3568
- Use pm_runtime_resume_and_get to fix pm_runtime_get_sync() usage
- Various cleanups like memory allocation error checks and plugged
leaks
- Allwinner H6 RTC clock support
- Allwinner H616 32 kHz clock support
- Add the Universal Flash Storage clock on Renesas R-Car S4-8
- Add I2C, SSIF-2 (sound), USB, CANFD, OSTM (timer), WDT, SPI Multi
I/O Bus, RSPI, TSU (thermal), and ADC clocks and resets on Renesas
RZ/G2UL
- Add display clock support on Renesas RZ/G2L
- Add RPC (QSPI/HyperFlash) clocks on Renesas R-Car E3 and D3
- Add 27 MHz phy PLL ref clock on i.MX
- Add mcore_booted module parameter to tell kernel M core has already
booted for i.MX
- Remove snvs clock on i.MX because it was for secure world only
- Add dt bindings for i.MX8MN GPT
- Add DISP2 pixel clock for i.MX8MP
- Add clkout1/2 for i.MX8MP
- Fix parent clock of ubs_root_clk for i.MX8MP
- Implement better RCG parking on Qualcomm SoCs using the shared RCG
clk ops
- Kerneldoc fixes
- Switch Tegra BPMP to determine_rate clk op
- Add a pointer to dt schema for generic clock bindings"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (168 commits)
Revert "clk: qcom: regmap-mux: add pipe clk implementation"
Revert "clk: qcom: gcc-sc7280: use new clk_regmap_mux_safe_ops for PCIe pipe clocks"
Revert "clk: qcom: gcc-sm8450: use new clk_regmap_mux_safe_ops for PCIe pipe clocks"
clk: bcm: rpi: Use correct order for the parameters of devm_kcalloc()
clk: stm32mp13: add safe mux management
clk: stm32mp13: add multi mux function
clk: stm32mp13: add all STM32MP13 kernel clocks
clk: stm32mp13: add all STM32MP13 peripheral clocks
clk: stm32mp13: manage secured clocks
clk: stm32mp13: add composite clock
clk: stm32mp13: add stm32 divider clock
clk: stm32mp13: add stm32_gate management
clk: stm32mp13: add stm32_mux clock management
clk: stm32: Introduce STM32MP13 RCC drivers (Reset Clock Controller)
dt-bindings: rcc: stm32: add new compatible for STM32MP13 SoC
clk: ti: clkctrl: replace usage of found with dedicated list iterator variable
clk: ti: composite: Prefer kcalloc over open coded arithmetic
dt-bindings: clock: exynosautov9: correct count of NR_CLK
clk: mediatek: mt8173: Switch to clk_hw provider APIs
clk: mediatek: Switch to clk_hw provider APIs
...
As GDSCs are turned on and off some associated clocks are momentarily
enabled for house keeping purposes. For this, and similar, purposes the
"shared RCGs" will park the RCG on a source clock which is known to be
available.
When the RCG is parked, a safe clock source will be selected and
committed, then the original source would be written back and upon enable
the change back to the unparked source would be committed.
But starting with SM8350 this fails, as the value in CFG is committed by
the GDSC handshake and without a ticking parent the GDSC enablement will
time out.
This becomes a concrete problem if the runtime supended state of a
device includes disabling such rcg's parent clock. As the device
attempts to power up the domain again the rcg will fail to enable and
hence the GDSC enablement will fail, preventing the device from
returning from the suspended state.
This can be seen in e.g. the display stack during probe on SM8350.
To avoid this problem, the software needs to ensure that the RCG is
configured to a active parent clock while it is disabled. This is done
by caching the CFG register content while the shared RCG is parked on
this safe source.
Writes to M, N and D registers are committed as they are requested. New
helpers for get_parent() and recalc_rate() are extracted from their
previous implementations and __clk_rcg2_configure() is modified to allow
it to operate on the cached value.
Fixes: 7ef6f11887 ("clk: qcom: Configure the RCGs to a safe source as needed")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20220426212136.1543984-1-bjorn.andersson@linaro.org
Since the commit 948fb0969e ("clk: Always clamp the rounded rate"),
the clk_core_determine_round_nolock() would clamp the requested rate
between min and max rates from the rate request. Normally these fields
would be filled by clk_core_get_boundaries() called from
clk_round_rate().
However clk_gfx3d_determine_rate() uses a manually crafted rate request,
which did not have these fields filled. Thus the requested frequency
would be clamped to 0, resulting in weird frequencies being requested
from the hardware.
Fix this by filling min_rate and max_rate to the values valid for the
respective PLLs (0 and ULONG_MAX).
Fixes: 948fb0969e ("clk: Always clamp the rounded rate")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220419235447.1586192-1-dmitry.baryshkov@linaro.org
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reported-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Support the new numerator and denominator for pixel clock on SM8350 and
support rgb101010, RGB888 use cases on SM8450.
Fixes: 99cbd064b0 ("clk: qcom: Support display RCG clocks")
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220227175536.3131-2-tdas@codeaurora.org
The display pixel clock has a requirement on certain newer platforms to
support M/N as (2/3) and the final D value calculated results in
underflow errors.
As the current implementation does not check for D value is within
the accepted range for a given M & N value. Update the logic to
calculate the final D value based on the range.
Fixes: 99cbd064b0 ("clk: qcom: Support display RCG clocks")
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220227175536.3131-1-tdas@codeaurora.org
The root clock generators with MND divider has the capability to support
change in duty-cycle by updating the 'D'. Add the clock ops which would
check all the boundary conditions and enable setting the desired duty-cycle
as per the consumer.
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lore.kernel.org/r/1619334502-9880-2-git-send-email-tdas@codeaurora.org
[sboyd@kernel.org: Remove _val everywhere]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
In case the mux is not divided parent_req was mistakenly not assigned to
leading __clk_determine_rate to determine the best frequency setting for
a requested rate of 0, resulting in the msm8996 platform not booting.
Rectify this by refactoring the logic to unconditionally assign to
parent_req.rate with the clock rate the caller is expecting.
Fixes: 7cbb78a99d ("clk: qcom: rcg2: Stop hardcoding gfx3d pingpong parent numbers")
Reported-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Tested-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-By: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Link: https://lore.kernel.org/r/20210302234106.3418665-1-marijn.suijten@somainline.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The function clk_gfx3d_determine_rate is selecting different PLLs
to manage the GFX3D clock source in a special way: this one needs
to be ping-pong'ed on different PLLs to ensure stability during
frequency switching (set a PLL rate, let it stabilize, switch the
RCG to the new PLL) and fast frequency transitions.
This technique is currently being used in the MSM8996 SoC and the
function was assuming that the parents were always at a specific
index in the parents list, which is TRUE, if we use this only on
the MSM8996 MMCC.
Unfortunately, MSM8996 is not the only SoC that needs to ping-pong
the graphics RCG, so choices are:
1. Make new special ops just to hardcode *again* other indexes,
creating code duplication for (imo) no reason; or
2. Generalize this function, so that it becomes usable for a range
of SoCs with slightly different ping-pong configuration.
In this commit, the second road was taken: define a new "special"
struct clk_rcg2_gfx3d, containing the ordered list of parents to
ping-pong the graphics clock on, and the "regular" rcg2 clock
structure in order to generalize the clk_gfx3d_determine_rate
function and make it working for other SoCs.
As for the function itself it is left with the assumption that we
need to ping-pong over three parents. The reasons for this are:
1. The initial model was MSM8996, which has 3 parents for the
graphics clock pingpong;
2. The other example that was taken into consideration is the
SDM630/636/660 SoC gpu clock controller, which is ping-ponging
over two dynamic clocked and one fixed clock PLL.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Link: https://lore.kernel.org/r/20210113183817.447866-6-angelogioacchino.delregno@somainline.org
[sboyd@kernel.org: Grow some local variables, drop do_div() usage in
favor of plain division, we're not dealing with a u64 here]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The clk_rcg2_dp_determine_rate() function is used for the DP pixel clk.
This function should return the rate that can be achieved by the pixel
clk in 'struct clk_rate_request::rate' and match the logic similar to
what is seen in clk_rcg2_dp_set_rate(). But that isn't the case. Instead
the code merely bubbles the rate request up to the parent of the pixel
clk and doesn't try to do a rational approximation of the rate that
would be achieved by picking some m/n value for the RCG.
Let's change this logic so that we can assume the parent clk frequency
is fixed (it is because it's the VCO of the DP PLL that is configured
based on the link rate) and so that we can calculate what the m/n value
will be and adjust the req->rate appropriately.
Cc: Jeykumar Sankaran <jsanka@codeaurora.org>
Cc: Chandan Uddaraju <chandanu@codeaurora.org>
Cc: Vara Reddy <varar@codeaurora.org>
Cc: Tanmay Shah <tanmay@codeaurora.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Manu Gautam <mgautam@codeaurora.org>
Cc: Sandeep Maheswaram <sanm@codeaurora.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Jonathan Marek <jonathan@marek.ca>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Rob Clark <robdclark@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20200916231202.3637932-10-swboyd@chromium.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
When I got my clock parenting slightly wrong I ended up with a crash
that looked like this:
Unable to handle kernel NULL pointer dereference at virtual
address 0000000000000000
...
pc : clk_hw_get_rate+0x14/0x44
...
Call trace:
clk_hw_get_rate+0x14/0x44
_freq_tbl_determine_rate+0x94/0xfc
clk_rcg2_determine_rate+0x2c/0x38
clk_core_determine_round_nolock+0x4c/0x88
clk_core_round_rate_nolock+0x6c/0xa8
clk_core_round_rate_nolock+0x9c/0xa8
clk_core_set_rate_nolock+0x70/0x180
clk_set_rate+0x3c/0x6c
of_clk_set_defaults+0x254/0x360
platform_drv_probe+0x28/0xb0
really_probe+0x120/0x2dc
driver_probe_device+0x64/0xfc
device_driver_attach+0x4c/0x6c
__driver_attach+0xac/0xc0
bus_for_each_dev+0x84/0xcc
driver_attach+0x2c/0x38
bus_add_driver+0xfc/0x1d0
driver_register+0x64/0xf8
__platform_driver_register+0x4c/0x58
msm_drm_register+0x5c/0x60
...
It turned out that clk_hw_get_parent_by_index() was returning NULL and
we weren't checking. Let's check it so that we don't crash.
Fixes: ac269395cd ("clk: qcom: Convert to clk_hw based provider APIs")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lkml.kernel.org/r/20200203103049.v4.1.I7487325fe8e701a68a07d3be8a6a4b571eca9cfa@changeid
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The DFS frequency table logic overwrites 'cfg' while detecting the
parent clk and then later on in clk_rcg2_dfs_populate_freq() we use that
same variable to figure out the mode of the clk, either MND or not. Add
a new variable to hold the parent clk bit so that 'cfg' is left
untouched for use later.
This fixes problems in detecting the supported frequencies for any clks
in DFS mode.
Fixes: cc4f6944d0 ("clk: qcom: Add support for RCG to register for DFS")
Reported-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20200128193329.45635-1-sboyd@kernel.org
Tested-by: Rajendra Nayak <rnayak@codeaurora.org>
Some RCGs (the gfx_3d_src_clk in msm8998 for example) are basically just
some constant ratio from the input across the entire frequency range. It
would be great if we could specify the frequency table as a single entry
constant ratio instead of a long list, ie:
{ .src = P_GPUPLL0_OUT_EVEN, .pre_div = 3 },
{ }
So, lets support that.
We need to fix a corner case in qcom_find_freq() where if the freq table
is non-null, but has no frequencies, we end up returning an "entry" before
the table array, which is bad. Then, we need ignore the freq from the
table, and instead base everything on the requested freq.
Suggested-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Link: https://lkml.kernel.org/r/20191031185715.15504-1-jeffrey.l.hugo@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
These aren't useful and they reference the init structure name. Let's
just drop them.
Cc: Taniya Das <tdas@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20190815160020.183334-5-sboyd@kernel.org
Acked-by: Taniya Das <tdas@codeaurora.org>
The RCG CFG/M/N/D register base could be at a different offset than
the CMD register, so introduce a cfg_offset to identify the offset
with respect to the CMD RCGR register.
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Signed-off-by: Anu Ramanathan <anur@codeaurora.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The table allocated in clk_rcg2_dfs_populate_freq_table() is
eventually iterated over by qcom_find_freq() which assumes that the
table is NULL terminated. Allocate one extra space in the array for
the NULL termination. Initting of the NULL termination is implicit
due to kcalloc().
Fixes: cc4f6944d0 ("clk: qcom: Add support for RCG to register for DFS")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Dynamic Frequency switch is a feature of clock controller by which request
from peripherals allows automatic switching frequency of input clock
without SW intervention. There are various performance levels associated
with a root clock. When the input performance state changes, the source
clocks and division ratios of the new performance state are loaded on to
RCG via HW and the RCG switches to new clock frequency when the RCG is in
DFS HW enabled mode.
Register the root clock generators(RCG) to switch to use the dfs clock ops
in the cases where DFS is enabled. The clk_round_rate() called by the clock
consumer would invoke the dfs determine clock ops and would read the DFS
performance level registers to identify all the frequencies supported and
update the frequency table. The DFS clock consumers would maintain these
frequency mapping and request the desired performance levels.
Signed-off-by: Taniya Das <tdas@codeaurora.org>
[sboyd@kernel.org: Rework registration logic to stop copying, change
recalc_rate() to index directly into the table if possible and fallback
to calculating on the fly with an assumed correct parent]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* clk-qcom-sdm845:
clk: qcom: Export clk_fabia_pll_configure()
clk: qcom: Add video clock controller driver for SDM845
dt-bindings: clock: Introduce QCOM Video clock bindings
clk: qcom: Add Global Clock controller (GCC) driver for SDM845
clk: qcom: Add DT bindings for SDM845 gcc clock controller
clk: qcom: Configure the RCGs to a safe source as needed
clk: qcom: Add support for BRANCH_HALT_SKIP flag for branch clocks
clk: qcom: Simplify gdsc status checking logic
clk: qcom: gdsc: Add support to poll CFG register to check GDSC state
clk: qcom: gdsc: Add support to poll for higher timeout value
clk: qcom: gdsc: Add support to reset AON and block reset logic
clk: qcom: Add support for controlling Fabia PLL
clk: qcom: Clear hardware clock control bit of RCG
Also fixup the Kconfig mess where SDM845 GCC has msm8998 in the
description and also the video Kconfig says things slightly differently
from the GCC one so just make it the same.
_freq_tbl_determine_rate uses the pre_div found in the clock plan
multiplied by the requested rate from the caller to determine the
best parent rate to set. If the requested rate is not exactly equal
to the rate that was found in the clock plan, then using the requested
rate in parent rate calculations is incorrect. For instance, if 150MHz
was requested, but 200MHz was the match found, and that plan had a
pre_div of 3, then the parent should be set to 600MHz, not 450MHz.
Signed-off-by: Evan Green <evgreen@chromium.org>
Fixes: bcd61c0f53 ("clk: qcom: Add support for root clock generators (RCGs)")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
For some root clock generators, there could be child branches which are
controlled by an entity other than application processor subsystem. For
such RCGs, as per application processor subsystem clock driver, all of
its downstream clocks are disabled and RCG is in disabled state but in
reality downstream clocks can be left enabled before.
So in this scenario, when RCG is disabled as per clock driver's point of
view and when rate scaling request comes before downstream clock enable
request, then RCG fails to update its configuration because in reality
RCG is on and it expects its new source to already be in enable state but
in reality new source is off. In order to avoid having the RCG to go into
an invalid state, add support to update the CFG, M, N and D registers
during set_rate() without configuration update and defer the actual RCG
configuration update to be done during clk_enable() as at this point of
time, both its new parent and safe source will be already enabled and RCG
can safely switch to new parent.
During clk_disable() request, configure it to safe source as both its
parents, safe source and current parent will be enabled and RCG can
safely execute a switch.
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Signed-off-by: Amit Nischal <anischal@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
For upcoming targets like sdm845, POR value of the hardware clock control
bit is set for most of root clocks which needs to be cleared for software
to be able to control. For older targets like MSM8996, this bit is reserved
bit and having POR value as 0 so this patch will work for the older targets
too. So update the configuration mask to take care of the same to clear
hardware clock control bit.
Signed-off-by: Amit Nischal <anischal@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The RCGs ops for shared branches are not used now, so remove it.
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The default behaviour with clk_rcg2_ops is for the
clk_round_rate()/clk_set_rate() to return/set a ceil clock
rate closest to the requested rate by looking up the corresponding
frequency table.
However, we do have some instances (mainly sdcc on various platforms)
of clients expecting a clk_set_rate() to set a floor value instead.
Add a new clk_rcg2_floor_ops to handle this for such specific
rcg instances
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Ritesh Harjani <riteshh@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The GPU clocks on msm8996 have three dedicated PLLs, MMPLL2,
MMPLL8, and MMPLL9. We leave MMPLL9 at the maximum speed (624
MHz), and we use MMPLL2 and MMPLL8 for the other frequencies. To
make switching frequencies faster, we ping-pong between MMPLL2
and MMPLL8 when we're switching between frequencies that aren't
the maximum. Implement custom rcg clk ops for this type of
frequency switching.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Some root clock generators may have child branches that are controlled
by different CPUs. These RCGs require some special operations:
- some enable bits have to be toggled when we set the rate;
- if RCG is disabled we only cache the rate and set it later when enabled;
- when the RCG is disabled, the mux is set to the safe source;
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
[sboyd@codeaurora.org: Simplify recalc_rate implementation]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Sometimes the display driver may want to change the parent PLL of
the display clocks (byte and pixel clocks) depending on the
use-case. Currently the parent is fixed by means of having a
frequency table with one entry that chooses a particular parent.
Remove this restriction and use the parent the clock is
configured for in the hardware during clk_set_rate(). This
requires consumers to rely on the default parent or to configure
the parent with clk_set_parent()/assigned-clock-parents on the
clocks before calling clk_set_rate().
Tested-by: Archit Taneja <architt@codeaurora.org>
Cc: Hai Li <hali@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
We're removing struct clk from the clk provider API, so switch
this code to using the clk_hw based provider APIs.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Mostly converted with the following snippet:
@@
struct clk_hw *E;
@@
-__clk_get_flags(E->clk)
+clk_hw_get_flags(E)
Acked-by: Tero Kristo <t-kristo@ti.com>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Coquelin <mcoquelin.stm32@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Clock rates are stored in an unsigned long field, but ->determine_rate()
(which returns a rounded rate from a requested one) returns a long
value (errors are reported using negative error codes), which can lead
to long overflow if the clock rate exceed 2Ghz.
Change ->determine_rate() prototype to return 0 or an error code, and pass
a pointer to a clk_rate_request structure containing the expected target
rate and the rate constraints imposed by clk users.
The clk_rate_request structure might be extended in the future to contain
other kind of constraints like the rounding policy, the maximum clock
inaccuracy or other things that are not yet supported by the CCF
(power consumption constraints ?).
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
CC: Jonathan Corbet <corbet@lwn.net>
CC: Tony Lindgren <tony@atomide.com>
CC: Ralf Baechle <ralf@linux-mips.org>
CC: "Emilio López" <emilio@elopez.com.ar>
CC: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Tero Kristo <t-kristo@ti.com>
CC: Peter De Schrijver <pdeschrijver@nvidia.com>
CC: Prashant Gaikwad <pgaikwad@nvidia.com>
CC: Stephen Warren <swarren@wwwdotorg.org>
CC: Thierry Reding <thierry.reding@gmail.com>
CC: Alexandre Courbot <gnurou@gmail.com>
CC: linux-doc@vger.kernel.org
CC: linux-kernel@vger.kernel.org
CC: linux-arm-kernel@lists.infradead.org
CC: linux-omap@vger.kernel.org
CC: linux-mips@linux-mips.org
CC: linux-tegra@vger.kernel.org
[sboyd@codeaurora.org: Fix parent dereference problem in
__clk_determine_rate()]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Tested-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
[sboyd@codeaurora.org: Folded in fix from Heiko for fixed-rate
clocks without parents or a rate determining op]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Since the parent rate has been recalculated, pixel RCG clock
should rely on it to find the correct M/N values during set_rate,
instead of calling __clk_round_rate() to its parent again.
Signed-off-by: Hai Li <hali@codeaurora.org>
Tested-by: Archit Taneja <architt@codeaurora.org>
Fixes: 99cbd064b0 ("clk: qcom: Support display RCG clocks")
[sboyd@codeaurora.org: Silenced unused parent variable warning]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
When we introduced the parent_map tables, we missed to update
some of the functions where mapping is translated. Fix this.
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Tested-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
