the diff is all the new Qualcomm clk drivers added for a few SoCs they're
working on. The other two vendors with significant work this cycle are Renesas
and Amlogic. Renesas adds a bunch of clks to existing drivers and supports some
new SoCs while Amlogic is starting a significant refactoring to simplify their
code.
The core framework gained a pair of helpers to get the 'struct device' or
'struct device_node' associated with a 'struct clk_hw'. Some associated KUnit
tests were added for these simple helpers as well. Beyond that core change
there are lots of little fixes throughout the clk drivers for the stuff we see
every day, wrong clk driver data that affects tree topology or supported
frequencies, etc. They're not found until the clks are actually used by some
consumer device driver.
New Drivers:
- Global, display, gpu, video, camera, tcsr, and rpmh clock controller for the
Qualcomm Milos SoC
- Camera, display, GPU, and video clock controllers for Qualcomm QCS615
- Video clock controller driver for Qualcomm SM6350
- Camera clock controller driver for Qualcomm SC8180X
- I3C clocks and resets on Renesas RZ/G3E
- Expanded Serial Peripheral Interface (xSPI) clocks and resets on
Renesas RZ/V2H(P) and RZ/V2N
- SPI (RSPI) clocks and resets on Renesas RZ/V2H(P)
- SDHI and I2C clocks on Renesas RZ/T2H and RZ/N2H
- Ethernet clocks and resets on Renesas RZ/G3E
- Initial support for the Renesas RZ/T2H (R9A09G077) and RZ/N2H
(R9A09G087) SoCs
- Ethernet clocks and resets on Renesas RZ/V2H and RZ/V2N
- Timer, I2C, watchdog, GPU, and USB2.0 clocks and resets on Renesas
RZ/V2N
Updates:
- Support atomic PWMs in the PWM clk driver
- clk_hw_get_dev() and clk_hw_get_of_node() helpers
- Replace round_rate() with determine_rate() in various clk drivers
- Convert clk DT bindings to DT schema format for DT validation
- Various clk driver cleanups and refactorings from static analysis tools and
possibly real humans
- A lot of little fixes here and there to things like clk tree topology,
missing frequencies, flagging clks as critical, etc. The full details are in
the commits and sub-tree merge logs
-----BEGIN PGP SIGNATURE-----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=S+dB
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"This is the usual collection of primarily clk driver updates.
The big part of the diff is all the new Qualcomm clk drivers added for
a few SoCs they're working on. The other two vendors with significant
work this cycle are Renesas and Amlogic. Renesas adds a bunch of clks
to existing drivers and supports some new SoCs while Amlogic is
starting a significant refactoring to simplify their code.
The core framework gained a pair of helpers to get the 'struct device'
or 'struct device_node' associated with a 'struct clk_hw'. Some
associated KUnit tests were added for these simple helpers as well.
Beyond that core change there are lots of little fixes throughout the
clk drivers for the stuff we see every day, wrong clk driver data that
affects tree topology or supported frequencies, etc. They're not found
until the clks are actually used by some consumer device driver.
New Drivers:
- Global, display, gpu, video, camera, tcsr, and rpmh clock
controller for the Qualcomm Milos SoC
- Camera, display, GPU, and video clock controllers for Qualcomm
QCS615
- Video clock controller driver for Qualcomm SM6350
- Camera clock controller driver for Qualcomm SC8180X
- I3C clocks and resets on Renesas RZ/G3E
- Expanded Serial Peripheral Interface (xSPI) clocks and resets on
Renesas RZ/V2H(P) and RZ/V2N
- SPI (RSPI) clocks and resets on Renesas RZ/V2H(P)
- SDHI and I2C clocks on Renesas RZ/T2H and RZ/N2H
- Ethernet clocks and resets on Renesas RZ/G3E
- Initial support for the Renesas RZ/T2H (R9A09G077) and RZ/N2H
(R9A09G087) SoCs
- Ethernet clocks and resets on Renesas RZ/V2H and RZ/V2N
- Timer, I2C, watchdog, GPU, and USB2.0 clocks and resets on Renesas
RZ/V2N
Updates:
- Support atomic PWMs in the PWM clk driver
- clk_hw_get_dev() and clk_hw_get_of_node() helpers
- Replace round_rate() with determine_rate() in various clk drivers
- Convert clk DT bindings to DT schema format for DT validation
- Various clk driver cleanups and refactorings from static analysis
tools and possibly real humans
- A lot of little fixes here and there to things like clk tree
topology, missing frequencies, flagging clks as critical, etc"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (216 commits)
clk: clocking-wizard: Fix the round rate handling for versal
clk: Fix typos
clk: spacemit: ccu_pll: fix error return value in recalc_rate callback
clk: tegra: periph: Make tegra_clk_periph_ops static
clk: tegra: periph: Fix error handling and resolve unsigned compare warning
clk: imx: scu: convert from round_rate() to determine_rate()
clk: imx: pllv4: convert from round_rate() to determine_rate()
clk: imx: pllv3: convert from round_rate() to determine_rate()
clk: imx: pllv2: convert from round_rate() to determine_rate()
clk: imx: pll14xx: convert from round_rate() to determine_rate()
clk: imx: pfd: convert from round_rate() to determine_rate()
clk: imx: frac-pll: convert from round_rate() to determine_rate()
clk: imx: fracn-gppll: convert from round_rate() to determine_rate()
clk: imx: fixup-div: convert from round_rate() to determine_rate()
clk: imx: cpu: convert from round_rate() to determine_rate()
clk: imx: busy: convert from round_rate() to determine_rate()
clk: imx: composite-93: remove round_rate() in favor of determine_rate()
clk: imx: composite-8m: remove round_rate() in favor of determine_rate()
clk: qcom: Remove redundant pm_runtime_mark_last_busy() calls
clk: imx: Remove redundant pm_runtime_mark_last_busy() calls
...
* clk-pm:
clk: qcom: Remove redundant pm_runtime_mark_last_busy() calls
clk: imx: Remove redundant pm_runtime_mark_last_busy() calls
Documentation: PM: *_autosuspend() functions update last busy time
PM: runtime: Mark last busy stamp in pm_request_autosuspend()
PM: runtime: Mark last busy stamp in pm_runtime_autosuspend()
PM: runtime: Mark last busy stamp in pm_runtime_put_sync_autosuspend()
PM: runtime: Mark last busy stamp in pm_runtime_put_autosuspend()
PM: runtime: Document return values of suspend-related API functions
pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(),
pm_runtime_autosuspend() and pm_request_autosuspend() now include a call
to pm_runtime_mark_last_busy(). Remove the now-reduntant explicit call to
pm_runtime_mark_last_busy().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20250704075401.3217179-1-sakari.ailus@linux.intel.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add support for the video clock controller found on Milos (e.g. SM7635)
based devices.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20250715-sm7635-clocks-v3-11-18f9faac4984@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for the graphics clock controller found on Milos (e.g.
SM7635) based devices.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20250715-sm7635-clocks-v3-9-18f9faac4984@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for the display clock controller found on Milos (e.g.
SM7635) based devices.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20250715-sm7635-clocks-v3-7-18f9faac4984@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for the camera clock controller found on Milos (e.g. SM7635)
based devices.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20250715-sm7635-clocks-v3-5-18f9faac4984@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support to register the rcg dfs in qcom_cc_really_probe(). This
allows users to move the call from the probe function to static
properties.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250715-sm7635-clocks-v3-1-18f9faac4984@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the missing video resets that are needed for the iris video codec.
Copied from gcc-sm8550.c.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Link: https://lore.kernel.org/r/20250709-x1e-videocc-v2-5-ad1acf5674b4@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
X1E80100 videocc is identical to the one in SM8550, aside from slightly
different recommended PLL frequencies. Add the separate frequency tables
for that and apply them if the qcom,x1e80100-videocc compatible is used.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Link: https://lore.kernel.org/r/20250709-x1e-videocc-v2-3-ad1acf5674b4@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
>From the build perspective, the videocc-sm8550 driver doesn't depend on
having one of the GCC drivers enabled. It builds just fine without the GCC
driver. In practice, it doesn't make much sense to have it enabled without
the GCC driver, but currently this extra dependency is inconsistent with
most of the other VIDEOCC entries in Kconfig. This can easily cause
confusion when you see the VIDEOCC options for some of the SoCs but not for
all of them.
Let's just drop the depends line to allow building the videocc driver
independent of the GCC selection. Compile testing with randconfig will also
benefit from keeping the dependencies minimal.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Link: https://lore.kernel.org/r/20250709-x1e-videocc-v2-2-ad1acf5674b4@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The Milos SoC has a very similar tcsrcc block, only TCSR_UFS_CLKREF_EN
uses different regs, and both TCSR_USB2_CLKREF_EN and
TCSR_USB3_CLKREF_EN are not present.
Modify these resources at probe if we're probing for Milos.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20250707-sm7635-clocks-misc-v2-4-b49f19055768@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250703-clk-cocci-drop-round-rate-v1-6-3a8da898367e@redhat.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250703-clk-cocci-drop-round-rate-v1-5-3a8da898367e@redhat.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250703-clk-cocci-drop-round-rate-v1-4-3a8da898367e@redhat.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250703-clk-cocci-drop-round-rate-v1-3-3a8da898367e@redhat.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250703-clk-cocci-drop-round-rate-v1-2-3a8da898367e@redhat.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for the video clock controller for video clients to
be able to request for the clocks on QCS615 platform.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Link: https://lore.kernel.org/r/20250702-qcs615-mm-v10-clock-controllers-v11-9-9c216e1615ab@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for the graphics clock controller for graphics clients to
be able to request for the clocks on QCS615 platform.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Link: https://lore.kernel.org/r/20250702-qcs615-mm-v10-clock-controllers-v11-7-9c216e1615ab@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for the display clock controller for display clients to
be able to request for the clocks on QCS615 platform.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Link: https://lore.kernel.org/r/20250702-qcs615-mm-v10-clock-controllers-v11-5-9c216e1615ab@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for the camera clock controller for camera clients to
be able to request for camcc clocks on QCS615 platform.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Link: https://lore.kernel.org/r/20250702-qcs615-mm-v10-clock-controllers-v11-3-9c216e1615ab@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The alpha PLLs which slew to a new frequency at runtime would require
the PLL to calibrate at the mid point of the VCO. Add the new PLL ops
which can support the slewing of the PLL to a new frequency.
Reviewed-by: Imran Shaik <quic_imrashai@quicinc.com>
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250702-qcs615-mm-v10-clock-controllers-v11-1-9c216e1615ab@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The MISC reset is supposed to trigger a resets across the MDC, DSP, and
RX & TX clocks of the IPQ5018 internal GE PHY. So let's set the bitmask
of the reset definition accordingly in the GCC as per the downstream
driver.
Link: 00743c3e82
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://lore.kernel.org/r/20250630-ipq5018-ge-phy-v6-1-01be06378c15@outlook.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The venus video driver will uses dev_pm_genpd_set_hwmode() API to switch
the video GDSC to HW and SW control modes at runtime. This requires domain
to have the HW_CTRL_TRIGGER flag.
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250613102245.782511-1-loic.poulain@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The XO clock must not be disabled to avoid the kernel trying to disable
the it. As such, keep the XO clock always on by flagging it as critical.
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250516-ipq5018-cmn-pll-v4-1-389a6b30e504@outlook.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Calling dev_pm_domain_attach()/dev_pm_domain_detach() in bus driver
probe/remove functions can affect system behavior when the drivers
attached to the bus use devres-managed resources. Since devres actions
may need to access device registers, calling dev_pm_domain_detach() too
early, i.e., before these actions complete, can cause failures on some
systems. One such example is Renesas RZ/G3S SoC-based platforms.
If the device clocks are managed via PM domains, invoking
dev_pm_domain_detach() in the bus driver's remove function removes the
device's clocks from the PM domain, preventing any subsequent
pm_runtime_resume*() calls from enabling those clocks.
The second argument of dev_pm_domain_attach() specifies whether the PM
domain should be powered on during attachment. Likewise, the second
argument of dev_pm_domain_detach() indicates whether the domain should be
powered off during detachment.
Upcoming changes address the issue described above (initially for the
platform bus only) by deferring the call to dev_pm_domain_detach() until
after devres_release_all() in device_unbind_cleanup(). The detach_power_off
field in struct dev_pm_info stores the detach power off info from the
second argument of dev_pm_domain_attach().
Because there are cases where the device's PM domain power-on/off behavior
must be conditional (e.g., in i2c_device_probe()), the patch introduces
PD_FLAG_ATTACH_POWER_ON and PD_FLAG_DETACH_POWER_OFF flags to be passed
to dev_pm_domain_attach().
Finally, dev_pm_domain_attach() and its users are updated to use the newly
introduced PD_FLAG_ATTACH_POWER_ON and PD_FLAG_DETACH_POWER_OFF macros.
This change is preparatory.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> # I2C
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/20250703112708.1621607-2-claudiu.beznea.uj@bp.renesas.com
[ rjw: Changelog adjustments ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The CMN PLL in IPQ5424 SoC supplies the fixed clock to NSS at 300 MHZ
and to PPE at 375 MHZ. Other output clocks from CMN PLL on this SoC,
and their rates are same as IPQ9574.
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Link: https://lore.kernel.org/r/20250610-qcom_ipq5424_cmnpll-v3-2-ceada8165645@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for the camera clock controller for camera clients to
be able to request for camcc clocks on SC8180X platform.
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
Link: https://lore.kernel.org/r/20250512-sc8180x-camcc-support-v4-3-8fb1d3265f52@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On SM8750 the setting rate of pixel and byte clocks, while the parent
DSI PHY PLL, fails with:
disp_cc_mdss_byte0_clk_src: rcg didn't update its configuration.
DSI PHY PLL has to be unprepared and its "PLL Power Down" bits in
CMN_CTRL_0 asserted.
Mark these clocks with CLK_OPS_PARENT_ENABLE to ensure the parent is
enabled during rate changes.
Cc: stable@vger.kernel.org
Fixes: f1080d8dab ("clk: qcom: dispcc-sm8750: Add SM8750 Display clock controller")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250520090741.45820-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
With the conversion done by commit e88f03230d ("clk: qcom: gcc-ipq8074:
rework nss_port5/6 clock to multiple conf") a Copy-Paste error was made
for the nss_port6_tx_clk_src frequency table.
This was caused by the wrong setting of the parent in
ftbl_nss_port6_tx_clk_src that was wrongly set to P_UNIPHY1_RX instead
of P_UNIPHY2_TX.
This cause the UNIPHY2 port to malfunction when it needs to be scaled to
higher clock. The malfunction was observed with the example scenario
with an Aquantia 10G PHY connected and a speed higher than 1G (example
2.5G)
Fix the broken frequency table to restore original functionality.
Cc: stable@vger.kernel.org
Fixes: e88f03230d ("clk: qcom: gcc-ipq8074: rework nss_port5/6 clock to multiple conf")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Tested-by: Robert Marko <robimarko@gmail.com>
Link: https://lore.kernel.org/r/20250522202600.4028-1-ansuelsmth@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The video driver will be using the newly introduced
dev_pm_genpd_set_hwmode() API to switch the video GDSC to HW and SW
control modes at runtime.
Hence use HW_CTRL_TRIGGER flag instead of HW_CTRL for video GDSC's for
Qualcomm SoC SC7180, SDM845, SM7150, SM8150 and SM8450.
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Renjiang Han <quic_renjiang@quicinc.com>
Link: https://lore.kernel.org/r/20250530-switch_gdsc_mode-v5-1-657c56313351@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for the video clock controller found on SM6350 based
devices.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Konrad Dybcio <konradybcio@kernel.org>
Co-developed-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20250324-sm6350-videocc-v2-3-cc22386433f4@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Camera PLLs on X1E80100 require both MMCX and MXC rails to be kept ON
to configure the PLLs properly. Hence move runtime power management,
PLL configuration and enabling critical clocks to qcom_cc_really_probe()
which ensures all required power domains are in enabled state before
configuring the PLLs or enabling the clocks.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # Dell Inspiron
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Link: https://lore.kernel.org/r/20250530-videocc-pll-multi-pd-voting-v5-12-02303b3a582d@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Camera PLLs on SM8650 require both MMCX and MXC rails to be kept ON
to configure the PLLs properly. Hence move runtime power management,
PLL configuration and enabling critical clocks to qcom_cc_really_probe()
which ensures all required power domains are in enabled state before
configuring the PLLs or enabling the clocks.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20250530-videocc-pll-multi-pd-voting-v5-11-02303b3a582d@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Camera PLLs on SM8550 require both MMCX and MXC rails to be kept ON to
configure the PLLs properly. Hence move runtime power management, PLL
configuration and enabling critical clocks to qcom_cc_really_probe() which
ensures all required power domains are in enabled state before configuring
the PLLs or enabling the clocks.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20250530-videocc-pll-multi-pd-voting-v5-10-02303b3a582d@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Camera PLLs on SM8450/SM8475 require both MMCX and MXC rails to be
kept ON to configure the PLLs properly. Hence move runtime power
management, PLL configuration and enable critical clocks to
qcom_cc_really_probe() which ensures all required power domains are in
enabled state before configuring the PLLs or enabling the clocks.
This change also removes the modelling for cam_cc_gdsc_clk and keeps it
always ON from probe since using CLK_IS_CRITICAL will prevent the clock
controller associated power domains from collapsing due to clock framework
invoking clk_pm_runtime_get() during prepare.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20250530-videocc-pll-multi-pd-voting-v5-9-02303b3a582d@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Video PLLs on SM8550/SM8650 require both MMCX and MXC rails to be kept ON
to configure the PLLs properly. Hence move runtime power management, PLL
configuration and enable critical clocks to qcom_cc_really_probe() which
ensures all required power domains are in enabled state before configuring
the PLLs or enabling the clocks.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250530-videocc-pll-multi-pd-voting-v5-8-02303b3a582d@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Video PLLs on SM8450/SM8475 require both MMCX and MXC rails to be kept ON
to configure the PLLs properly. Hence move runtime power management, PLL
configuration and enable critical clocks to qcom_cc_really_probe() which
ensures all required power domains are in enabled state before configuring
the PLLs or enabling the clocks.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Link: https://lore.kernel.org/r/20250530-videocc-pll-multi-pd-voting-v5-7-02303b3a582d@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support to configure PLLS and clk registers in qcom_cc_really_probe().
This ensures all required power domains are enabled and kept ON by runtime
PM code in qcom_cc_really_probe() before configuring the PLLS or clock
registers.
Add support for qcom_cc_driver_data struct to maintain the clock
controllers PLLs and CBCRs data, and a pointer of it can be stored in
clock descriptor structure. If any clock controller driver requires to
program some additional misc register settings, it can register the
clk_regs_configure() callback in the driver data.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250530-videocc-pll-multi-pd-voting-v5-6-02303b3a582d@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for runtime power management in qcom_cc_really_probe() to
commonize it across all the clock controllers. The runtime power management
is not required for all clock controllers, hence handle the rpm based on
use_rpm flag in clock controller descriptor.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Link: https://lore.kernel.org/r/20250530-videocc-pll-multi-pd-voting-v5-5-02303b3a582d@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
To properly configure the PLLs on recent chipsets, it often requires more
than one power domain to be kept ON. The support to enable multiple power
domains is being added in qcom_cc_really_probe() and PLLs should be
configured post all the required power domains are enabled.
Hence integrate PLL configuration into clk_alpha_pll structure and add
support for qcom_clk_alpha_pll_configure() function which can be called
from qcom_cc_really_probe() to configure the clock controller PLLs after
all required power domains are enabled.
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Link: https://lore.kernel.org/r/20250530-videocc-pll-multi-pd-voting-v5-4-02303b3a582d@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Update the force mem core bit for UFS ICE clock and UFS PHY AXI clock to
force the core on signal to remain active during halt state of the clk.
If force mem core bit of the clock is not set, the memories of the
subsystem will not retain the logic across power states. This is
required for the MCQ feature of UFS.
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Reviewed-by: Imran Shaik <quic_imrashai@quicinc.com>
Link: https://lore.kernel.org/r/20250414-gcc_ufs_mem_core-v1-2-67b5529b9b5d@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Update the force mem core bit for UFS AXI clock to force the core on
signal to remain active during halt state of the clk. If force mem
core bit of the clock is not set, the memories of the subsystem will
not retain the logic across power states. This is required for the MCQ
feature of the UFS driver.
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Reviewed-by: Imran Shaik <quic_imrashai@quicinc.com>
Link: https://lore.kernel.org/r/20250414-gcc_ufs_mem_core-v1-1-67b5529b9b5d@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On SM8650, clkaN are missing in cmd-db for some specific devices. This
caused a boot failure. Printing log during initramfs phase, I found
[ 0.053281] clk-rpmh 17a00000.rsc:clock-controller: missing RPMh resource address for clka1
Adding the optional property to avoid probing failure which causes
countless deferred probe. In the downstream tree,similar workarounds
are introduced for SM7635, SM8550, SM8635, SM8650, SM8750.
Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
Link: https://lore.kernel.org/r/20250413172205.175789-1-mitltlatltl@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QCS8300 Camera clock controller is a derivative of SA8775P, but has
few additional clocks and offset differences. Hence, add support for
QCS8300 Camera clock controller by extending the SA8775P CamCC.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com>
Link: https://lore.kernel.org/r/20250327-qcs8300-mm-patches-v6-1-b3fbde2820a6@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
