After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all clk drivers to use .remove(), with the eventual goal to drop
struct platform_driver::remove_new(). As .remove() and .remove_new() have
the same prototypes, conversion is done by just changing the structure
member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20240909144026.870565-2-u.kleine-koenig@baylibre.com
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> # renesas
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add a MODULE_DESCRIPTION() on all drivers that miss it to avoid
modpost warnings.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240528121320.160685-1-angelogioacchino.delregno@collabora.com
Tested-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
- Migrate platform clk drivers to .remove_new()
- Migrate i2c clk drivers to .probe() instead of .probe_new()
- Remove CLK_SET_PARENT from all Mediatek MSDC core clocks
- Add infra_ao reset support for Mediatek MT8188 SoCs
- Align driver_data to i2c_device_id tables in some i2c clk drivers
- Use device_get_match_data() in vc5 clk driver
* clk-platform:
clk: mediatek: Convert all remaining drivers to platform_driver's .remove_new()
clk: mediatek: Make mtk_clk_pdev_remove() return void
clk: mediatek: Make mtk_clk_simple_remove() return void
* clk-i2c:
clk: si521xx: Switch i2c driver back to use .probe()
clk: Switch i2c drivers back to use .probe()
* clk-mediatek:
clk: mediatek: clk-mt8173-apmixedsys: Fix iomap not released issue
clk: mediatek: clk-mt8173-apmixedsys: Fix return value for of_iomap() error
clk: mediatek: clk-mtk: Grab iomem pointer for divider clocks
clk: mediatek: fix of_iomap memory leak
clk: mediatek: reset: add infra_ao reset support for MT8188
dt-bindings: reset: mt8188: add thermal reset control bit
clk: mediatek: Remove CLK_SET_PARENT from all MSDC core clocks
clk: mediatek: mux: Stop forcing CLK_SET_RATE_PARENT flag
clk: mediatek: Enable all MT8192 clocks by default
* clk-i2cid:
clk: rs9: Fix .driver_data content in i2c_device_id
clk: vc7: Fix .driver_data content in i2c_device_id
clk: vc5: Fix .driver_data content in i2c_device_id
* clk-vc5:
clk: vc7: Use device_get_match_data() instead of of_device_get_match_data()
clk: vc5: Use device_get_match_data() instead of of_device_get_match_data()
Various MSDC core clocks, used for multiple MSDC controller instances,
share the same parent(s): in order to add parents selection in the
mtk-sd driver to achieve an accurate clock rate for all modes, remove
the CLK_SET_RATE_PARENT flag from all MSDC clocks for all SoCs: this
will make sure that a clk_set_rate() call performed for a clock on
a secondary controller will not change the rate of a common parent,
which would result in an overclock or underclock of one of the
controllers.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://lore.kernel.org/r/20230516135205.372951-3-angelogioacchino.delregno@collabora.com
Tested-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The clk-mux driver was forcing the CLK_SET_RATE_PARENT flag even for
the GATE_CLK_SET_UPD_FLAGS() macro, as in mtk_clk_register_mux() the
flag was unconditionally added.
In preparation for a change on MSDC clock muxes, stop forcing this
flag and, where necessary, update clock drivers to add it so that
with this commit we introduce no functional changes for the currently
supported SoCs.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://lore.kernel.org/r/20230516135205.372951-2-angelogioacchino.delregno@collabora.com
Tested-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
__mtk_clk_simple_remove() and so also mtk_clk_simple_remove() return
zero unconditionally. Make them return no value instead and convert the
drivers making use of it to platform_driver's .remove_new().
This makes the semantics in the callers of mtk_clk_simple_remove() clearer
and prepares for the quest to make platform driver's remove function return
void. There is no semantic change.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230430190233.878921-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add a MODULE_DEVICE_TABLE() on all clocks that can be built as modules
to allow auto-load at boot.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Miles Chen <miles.chen@mediatek.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org> # MT8183, MT8192, MT8195 Chromebooks
Link: https://lore.kernel.org/r/20230306140543.1813621-50-angelogioacchino.delregno@collabora.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
In order to successfully build clock drivers as modules it is required
to declare a module license: add it where missing.
While at it, also change the MODULE_LICENSE text from "GPL v2" to
"GPL" (which means the same) on clk-mt7981-eth.c.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Miles Chen <miles.chen@mediatek.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org> # MT8183, MT8192, MT8195 Chromebooks
Link: https://lore.kernel.org/r/20230306140543.1813621-38-angelogioacchino.delregno@collabora.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Lots of clock drivers have got both .probe() and a .remove() callbacks:
switch from builtin_platform_driver() to module_platform_driver() so
that we actually register the .remove() callback.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Miles Chen <miles.chen@mediatek.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org> # MT8183, MT8192, MT8195 Chromebooks
Link: https://lore.kernel.org/r/20230306140543.1813621-37-angelogioacchino.delregno@collabora.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
As done with MT8192, migrate MT8186 topckgen away from a custom probe
function and use mtk_clk_simple_{probe, remove}().
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20230120092053.182923-21-angelogioacchino.delregno@collabora.com
Tested-by: Mingming Su <mingming.su@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Like done for MT8192, join the two to register them in one shot, as
there's no point in doing that separately from one another.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230120092053.182923-17-angelogioacchino.delregno@collabora.com
Tested-by: Mingming Su <mingming.su@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Like done for other clocks, propagate struct device for mtk mux clocks
registered through clk-mux helpers to enable runtime pm support.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Miles Chen <miles.chen@mediatek.com>
Link: https://lore.kernel.org/r/20230120092053.182923-7-angelogioacchino.delregno@collabora.com
Tested-by: Mingming Su <mingming.su@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Like done for cpumux clocks, propagate struct device for composite
clocks registered through clk-mtk helpers to be able to get runtime
pm support for MTK clocks.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Miles Chen <miles.chen@mediatek.com>
Link: https://lore.kernel.org/r/20230120092053.182923-6-angelogioacchino.delregno@collabora.com
Tested-by: Mingming Su <mingming.su@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Following the changes done to MT8183, MT8192, MT8195, register a
clock notifier for MT8186, allowing safe clockrate updates for the
MFG PLL.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20221024102307.33722-11-angelogioacchino.delregno@collabora.com
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
The mainpll and univpll clocks are used as clock sources for multiple
peripherals of different kind, some of which are critical (like AXIs);
a rate change on any of these two will produce a rate change on many
devices and that's likely to produce system instability if not done
correctly: this is the reason why we have "fixed factor" clocks, used
by MUX clocks to provide different rates based on PLL output dividers.
Though, there's one fundamental issue that must be resolved somehow:
When performing GPU DVFS, we get a rate request that will try to change
the frequency of MAINPLL due to the CLK_TOP_MFG mux having clk26m,
mfgpll (the GPU dedicated PLL), mainpll_d3, mainpll_d5 (fixed factor
dividers) as possible parents.
In order to solve that, there are two ways:
1. Add new "fake" mainpll_d3_fixed, mainpll_d5_fixed clocks, clones
of mainpll_d3, mainpll_d5 clocks, for the only purpose of not
declaring CLK_SET_RATE_PARENT; or
2. Simply drop said flag from the original dividers.
After some careful validation, I cannot see anything calling a rate
change request during runtime for MAINPLL, nor for UNIVPLL (which would,
again, mean that we're reclocking lots of peripherals at once!), so it
is safe *and sane* to simply remove the CLK_SET_RATE_PARENT flag to all
of the main/univpll fixed factor divider clocks.
Besides, if for any (doubtful) reason main/univpll rate change will be
required in the future, it's still possible to call that on the PLL main
clocks, so we're still covered anyway.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20221024102307.33722-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
As part of the effort to improve the MediaTek clk drivers, the next step
is to switch from the old 'struct clk' clk prodivder APIs to the new
'struct clk_hw' ones.
Instead of adding new APIs to the MediaTek clk driver library mirroring
the existing ones, moving all drivers to the new APIs, and then removing
the old ones, just migrate everything at the same time. This involves
replacing 'struct clk' with 'struct clk_hw', and 'struct clk_onecell_data'
with 'struct clk_hw_onecell_data', and fixing up all usages.
For now, the clk_register() and co. usage is retained, with __clk_get_hw()
and (struct clk_hw *)->clk used to bridge the difference between the APIs.
These will be replaced in subsequent patches.
Fix up mtk_{alloc,free}_clk_data to use 'struct clk_hw' by hand. Fix up
all other affected call sites with the following coccinelle script.
// Replace type
@@
@@
- struct clk_onecell_data
+ struct clk_hw_onecell_data
// Replace of_clk_add_provider() & of_clk_src_simple_get()
@@
expression NP, DATA;
symbol of_clk_src_onecell_get;
@@
- of_clk_add_provider(
+ of_clk_add_hw_provider(
NP,
- of_clk_src_onecell_get,
+ of_clk_hw_onecell_get,
DATA
)
// Fix register/unregister
@@
identifier CD;
expression E;
identifier fn =~ "unregister";
@@
fn(...,
- CD->clks[E]
+ CD->hws[E]->clk
,...
);
// Fix calls to clk_prepare_enable()
@@
identifier CD;
expression E;
@@
clk_prepare_enable(
- CD->clks[E]
+ CD->hws[E]->clk
);
// Fix pointer assignment
@@
identifier CD;
identifier CLK;
expression E;
@@
- CD->clks[E]
+ CD->hws[E]
=
(
- CLK
+ __clk_get_hw(CLK)
|
ERR_PTR(...)
)
;
// Fix pointer usage
@@
identifier CD;
expression E;
@@
- CD->clks[E]
+ CD->hws[E]
// Fix mtk_clk_pll_get_base()
@@
symbol clk, hw, data;
@@
mtk_clk_pll_get_base(
- struct clk *clk,
+ struct clk_hw *hw,
const struct mtk_pll_data *data
) {
- struct clk_hw *hw = __clk_get_hw(clk);
...
}
// Fix mtk_clk_pll_get_base() usage
@@
identifier CD;
expression E;
@@
mtk_clk_pll_get_base(
- CD->clks[E]
+ CD->hws[E]->clk
,...
);
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Miles Chen <miles.chen@mediatek.com>
Link: https://lore.kernel.org/r/20220519071610.423372-4-wenst@chromium.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add MT8186 topckgen clock controller which provides muxes, dividers
to handle variety clock selection in other IP blocks.
Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Link: https://lore.kernel.org/r/20220409132251.31725-4-chun-jie.chen@mediatek.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
