The test for interrupts in tpm_tis_send() is skipped if the flag
TPM_CHIP_FLAG_IRQ is not set. Since the current code never sets the flag
initially the test is never executed.
Fix this by setting the flag in tpm_tis_gen_interrupt() right after
interrupts have been enabled and before the test is executed.
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Tested-by: Michael Niewöhner <linux@mniewoehner.de>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
In tpm_tis_gen_interrupt() a request for a property value is sent to the
TPM to test if interrupts are generated. However after a power cycle the
TPM responds with TPM_RC_INITIALIZE which indicates that the TPM is not
yet properly initialized.
Fix this by first starting the TPM up before the request is sent. For this
the startup implementation is removed from tpm_chip_register() and put
into the new function tpm_chip_startup() which is called before the
interrupts are tested.
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
In tpm_tis_resume() make sure that the locality has been claimed when
tpm_tis_reenable_interrupts() is called. Otherwise the writings to the
register might not have any effect.
Fixes: 45baa1d1fa ("tpm_tis: Re-enable interrupts upon (S3) resume")
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Writing the TPM_INT_STATUS register in the interrupt handler to clear the
interrupts only has effect if a locality is held. Since this is not
guaranteed at the time the interrupt is fired, claim the locality
explicitly in the handler.
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Tested-by: Michael Niewöhner <linux@mniewoehner.de>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The TIS interrupt handler at least has to read and write the interrupt
status register. In case of SPI both operations result in a call to
tpm_tis_spi_transfer() which uses the bus_lock_mutex of the spi device
and thus must only be called from a sleepable context.
To ensure this request a threaded interrupt handler.
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Tested-by: Michael Niewöhner <linux@mniewoehner.de>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Implement a usage counter for the (default) locality used by the TPM TIS
driver:
Request the locality from the TPM if it has not been claimed yet, otherwise
only increment the counter. Also release the locality if the counter is 0
otherwise only decrement the counter. Since in case of SPI the register
accesses are locked by means of the SPI bus mutex use a sleepable lock
(i.e. also a mutex) to ensure thread-safety of the counter which may be
accessed by both a userspace thread and the interrupt handler.
By doing this refactor the names of the amended functions to use a more
appropriate prefix.
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Tested-by: Michael Niewöhner <linux@mniewoehner.de>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
After driver initialization tpm_tis_data->locality may only be modified in
case of a LOCALITY CHANGE interrupt. In this case the interrupt handler
iterates over all localities only to assign the active one to
tpm_tis_data->locality.
However this information is never used any more, so the assignment is not
needed.
Furthermore without the assignment tpm_tis_data->locality cannot change any
more at driver runtime, and thus no protection against concurrent
modification is required when the variable is read at other places.
So remove this iteration entirely.
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Clean up wait_for_tpm_stat() by moving multiple similar interrupt mask
checks into an own function.
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Suggested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
According to the TPM Interface Specification (TIS) support for "stsValid"
and "commandReady" interrupts is only optional.
This has to be taken into account when handling the interrupts in functions
like wait_for_tpm_stat(). To determine the supported interrupts use the
capability query.
Also adjust wait_for_tpm_stat() to only wait for interrupt reported status
changes. After that process all the remaining status changes by polling
the status register.
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Tested-by: Michael Niewöhner <linux@mniewoehner.de>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
In tpm_tis_probe_single_irq() interrupt registers TPM_INT_VECTOR,
TPM_INT_STATUS and TPM_INT_ENABLE are modified to setup the interrupts.
Currently these modifications are done without holding a locality thus they
have no effect. Fix this by claiming the (default) locality before the
registers are written.
Since now tpm_tis_gen_interrupt() is called with the locality already
claimed remove locality request and release from this function.
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
If in tpm_tis_probe_irq_single() an error occurs after the original
interrupt vector has been read, restore the interrupts before the error is
returned.
Since the caller does not check the error value, return -1 in any case that
the TPM_CHIP_FLAG_IRQ flag is not set. Since the return value of function
tpm_tis_gen_interrupt() is not longer used, make it a void function.
Fixes: 1107d065fd ("tpm_tis: Introduce intermediate layer for TPM access")
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Both functions tpm_tis_probe_irq_single() and tpm_tis_probe_irq() may setup
the interrupts and then return with an error. This case is indicated by a
missing TPM_CHIP_FLAG_IRQ flag in chip->flags.
Currently the interrupt setup is only undone if tpm_tis_probe_irq_single()
fails. Undo the setup also if tpm_tis_probe_irq() fails.
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Tested-by: Michael Niewöhner <linux@mniewoehner.de>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
In disable_interrupts() the TPM_GLOBAL_INT_ENABLE bit is unset in the
TPM_INT_ENABLE register to shut the interrupts off. However modifying the
register is only possible with a held locality. So claim the locality
before disable_interrupts() is called.
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Tested-by: Michael Niewöhner <linux@mniewoehner.de>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The interrupt handler that sets the boolean variable irq_tested may run on
another CPU as the thread that checks irq_tested as part of the irq test in
tpm_tis_send().
Since nothing guarantees cache coherency between CPUs for unsynchronized
accesses to boolean variables the testing thread might not perceive the
value change done in the interrupt handler.
Avoid this issue by setting the bit TPM_TIS_IRQ_TESTED in the flags field
of the tpm_tis_data struct and by accessing this field with the bit
manipulating functions that provide cache coherency.
Also convert all other existing sites to use the proper macros when
accessing this bitfield.
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Tested-by: Michael Niewöhner <linux@mniewoehner.de>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Pointer variables of void * type do not require type cast.
Signed-off-by: Yu Zhe <yuzhe@nfschina.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
When waiting for a tpm ready completion, the cr50 i2c driver incorrectly
assumes that the value of timeout_a is represented in milliseconds
instead of jiffies.
Remove the msecs_to_jiffies conversion.
Signed-off-by: Mark Hasemeyer <markhas@chromium.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
With linux/acpi.h (in linux/tpm.h) no longer implicitly including of.h,
add an explicit include of of.h to fix the following errors:
drivers/char/tpm/tpm_atmel.h:50:14: error: implicit declaration of function 'of_find_node_by_name'; did you mean 'bus_find_device_by_name'? [-Werror=implicit-function-declaration]
drivers/char/tpm/tpm_atmel.h:50:12: error: assignment to 'struct device_node *' from 'int' makes pointer from integer without a cast [-Werror=int-conversion]
drivers/char/tpm/tpm_atmel.h:55:14: error: implicit declaration of function 'of_device_is_compatible'; did you mean 'fwnode_device_is_compatible'? [-Werror=implicit-function-declaration]
...
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
We need the fixes in here for testing, as well as the driver core
changes for documentation updates to build on.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Smatch reports:
drivers/char/tpm/tpm-interface.c:470 tpm_init() error:
'tpm_class' dereferencing possible ERR_PTR()
If class_create() returns error pointer, we are dereferencing a possible
error pointer. Fix this by moving the dereference post error handling.
Fixes: a010eb8812 ("tpm: fix up the tpm_class shutdown_pre pointer when created")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Link: https://lore.kernel.org/r/20230321061416.626561-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Do not wait until long after the struct class has been created to set
the shutdown_pre pointer for the tpm_class, assign it right away.
This is the only in-kernel offender that tries to modify the
device->class pointer contents after it has been assigned to a device,
so fix that up by doing the function pointer assignment before it is
matched with the device. Because of this, the patch should go through
the driver core tree to allow later changes to struct device to be
possible.
Cc: Peter Huewe <peterhuewe@gmx.de>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-integrity@vger.kernel.org
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lore.kernel.org/r/20230313181843.1207845-10-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The module pointer in class_create() never actually did anything, and it
shouldn't have been requred to be set as a parameter even if it did
something. So just remove it and fix up all callers of the function in
the kernel tree at the same time.
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20230313181843.1207845-4-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
AMD has issued an advisory indicating that having fTPM enabled in
BIOS can cause "stuttering" in the OS. This issue has been fixed
in newer versions of the fTPM firmware, but it's up to system
designers to decide whether to distribute it.
This issue has existed for a while, but is more prevalent starting
with kernel 6.1 because commit b006c439d5 ("hwrng: core - start
hwrng kthread also for untrusted sources") started to use the fTPM
for hwrng by default. However, all uses of /dev/hwrng result in
unacceptable stuttering.
So, simply disable registration of the defective hwrng when detecting
these faulty fTPM versions. As this is caused by faulty firmware, it
is plausible that such a problem could also be reproduced by other TPM
interactions, but this hasn't been shown by any user's testing or reports.
It is hypothesized to be triggered more frequently by the use of the RNG
because userspace software will fetch random numbers regularly.
Intentionally continue to register other TPM functionality so that users
that rely upon PCR measurements or any storage of data will still have
access to it. If it's found later that another TPM functionality is
exacerbating this problem a module parameter it can be turned off entirely
and a module parameter can be introduced to allow users who rely upon
fTPM functionality to turn it on even though this problem is present.
Link: https://www.amd.com/en/support/kb/faq/pa-410
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216989
Link: https://lore.kernel.org/all/20230209153120.261904-1-Jason@zx2c4.com/
Fixes: b006c439d5 ("hwrng: core - start hwrng kthread also for untrusted sources")
Cc: stable@vger.kernel.org
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Cc: James Bottomley <James.Bottomley@hansenpartnership.com>
Tested-by: reach622@mailcuk.com
Tested-by: Bell <1138267643@qq.com>
Co-developed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Some TPM 2.0 devices have support for additional commands which are not
part of the TPM 2.0 specifications.
These commands are identified with bit 29 of the 32 bits command codes.
Contrarily to other fields of the TPMA_CC spec structure used to list
available commands, the Vendor flag also has to be present in the
command code itself (TPM_CC) when called.
Add this flag to tpm_find_cc() mask to prevent blocking vendor command
codes that can actually be supported by the underlying TPM device.
Signed-off-by: Julien Gomes <julien@arista.com>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Some platforms may desire to pass the event log up to Linux in the
form of a reserved memory region. In particular, this is desirable
for embedded systems or baseboard management controllers (BMCs)
booting with U-Boot. IBM OpenBMC BMCs will be the first user.
Add support for the reserved memory in the TPM core to find the
region and map it.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
[jarkko: removed spurious dev_info()'s from tpm_read_log_memory_region()]
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
[yang: return -ENOMEM when devm_memremap() fails]
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Since the bios event log is freed in the device release function,
let devres handle the deallocation. This will allow other memory
allocation/mapping functions to be used for the bios event log.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Pluton is an integrated security processor present in some recent Ryzen
parts. If it's enabled, it presents two devices - an MSFT0101 ACPI device
that's broadly an implementation of a Command Response Buffer TPM2, and an
MSFT0200 ACPI device whose functionality I haven't examined in detail yet.
This patch only attempts to add support for the TPM device.
There's a few things that need to be handled here. The first is that the
TPM2 ACPI table uses a previously undefined start method identifier. The
table format appears to include 16 bytes of startup data, which corresponds
to one 64-bit address for a start message and one 64-bit address for a
completion response. The second is that the ACPI tables on the Thinkpad Z13
I'm testing this on don't define any memory windows in _CRS (or, more
accurately, there are two empty memory windows). This check doesn't seem
strictly necessary, so I've skipped that.
Finally, it seems like chip needs to be explicitly asked to transition into
ready status on every command. Failing to do this means that if two
commands are sent in succession without an idle/ready transition in
between, everything will appear to work fine but the response is simply the
original command. I'm working without any docs here, so I'm not sure if
this is actually the required behaviour or if I'm missing something
somewhere else, but doing this results in the chip working reliably.
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Matthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCY76ohgAKCRCAXGG7T9hj
vo8fAP0XJ94B7asqcN4W3EyeyfqxUf1eZvmWRhrbKqpLnmHLaQEA/uJBkXL49Zj7
TTcbxR1coJ/hPwhtmONU4TNtCZ+RXw0=
=2Ib5
-----END PGP SIGNATURE-----
Merge tag 'for-linus-6.2-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- two cleanup patches
- a fix of a memory leak in the Xen pvfront driver
- a fix of a locking issue in the Xen hypervisor console driver
* tag 'for-linus-6.2-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/pvcalls: free active map buffer on pvcalls_front_free_map
hvc/xen: lock console list traversal
x86/xen: Remove the unused function p2m_index()
xen: make remove callback of xen driver void returned
TPM 1 is sometimes broken across system suspends, due to races or
locking issues or something else that haven't been diagnosed or fixed
yet, most likely having to do with concurrent reads from the TPM's
hardware random number generator driver. These issues prevent the system
from actually suspending, with errors like:
tpm tpm0: A TPM error (28) occurred continue selftest
...
tpm tpm0: A TPM error (28) occurred attempting get random
...
tpm tpm0: Error (28) sending savestate before suspend
tpm_tis 00:08: PM: __pnp_bus_suspend(): tpm_pm_suspend+0x0/0x80 returns 28
tpm_tis 00:08: PM: dpm_run_callback(): pnp_bus_suspend+0x0/0x10 returns 28
tpm_tis 00:08: PM: failed to suspend: error 28
PM: Some devices failed to suspend, or early wake event detected
This issue was partially fixed by 23393c6461 ("char: tpm: Protect
tpm_pm_suspend with locks"), in a last minute 6.1 commit that Linus took
directly because the TPM maintainers weren't available. However, it
seems like this just addresses the most common cases of the bug, rather
than addressing it entirely. So there are more things to fix still,
apparently.
In lieu of actually fixing the underlying bug, just allow system suspend
to continue, so that laptops still go to sleep fine. Later, this can be
reverted when the real bug is fixed.
Link: https://lore.kernel.org/lkml/7cbe96cf-e0b5-ba63-d1b4-f63d2e826efa@suse.cz/
Cc: stable@vger.kernel.org # 6.1+
Reported-by: Vlastimil Babka <vbabka@suse.cz>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Luigi Semenzato <semenzato@chromium.org>
Cc: Peter Huewe <peterhuewe@gmx.de>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Johannes Altmanninger <aclopte@gmail.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since commit fc7a6209d5 ("bus: Make remove callback return void")
forces bus_type::remove be void-returned, it doesn't make much sense for
any bus based driver implementing remove callbalk to return non-void to
its caller.
This change is for xen bus based drivers.
Acked-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Dawei Li <set_pte_at@outlook.com>
Link: https://lore.kernel.org/r/TYCP286MB23238119AB4DF190997075C9CAE39@TYCP286MB2323.JPNP286.PROD.OUTLOOK.COM
Signed-off-by: Juergen Gross <jgross@suse.com>
- Update the ACPICA code in the kernel to the 20221020 upstream
version and fix a couple of issues in it:
* Make acpi_ex_load_op() match upstream implementation (Rafael
Wysocki).
* Add support for loong_arch-specific APICs in MADT (Huacai Chen).
* Add support for fixed PCIe wake event (Huacai Chen).
* Add EBDA pointer sanity checks (Vit Kabele).
* Avoid accessing VGA memory when EBDA < 1KiB (Vit Kabele).
* Add CCEL table support to both compiler/disassembler (Kuppuswamy
Sathyanarayanan).
* Add a couple of new UUIDs to the known UUID list (Bob Moore).
* Add support for FFH Opregion special context data (Sudeep Holla).
* Improve warning message for "invalid ACPI name" (Bob Moore).
* Add support for CXL 3.0 structures (CXIMS & RDPAS) in the CEDT
table (Alison Schofield).
* Prepare IORT support for revision E.e (Robin Murphy).
* Finish support for the CDAT table (Bob Moore).
* Fix error code path in acpi_ds_call_control_method() (Rafael
Wysocki).
* Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage() (Li
Zetao).
* Update the version of the ACPICA code in the kernel (Bob Moore).
- Use ZERO_PAGE(0) instead of empty_zero_page in the ACPI device
enumeration code (Giulio Benetti).
- Change the return type of the ACPI driver remove callback to void and
update its users accordingly (Dawei Li).
- Add general support for FFH address space type and implement the low-
level part of it for ARM64 (Sudeep Holla).
- Fix stale comments in the ACPI tables parsing code and make it print
more messages related to MADT (Hanjun Guo, Huacai Chen).
- Replace invocations of generic library functions with more kernel-
specific counterparts in the ACPI sysfs interface (Christophe JAILLET,
Xu Panda).
- Print full name paths of ACPI power resource objects during
enumeration (Kane Chen).
- Eliminate a compiler warning regarding a missing function prototype
in the ACPI power management code (Sudeep Holla).
- Fix and clean up the ACPI processor driver (Rafael Wysocki, Li Zhong,
Colin Ian King, Sudeep Holla).
- Add quirk for the HP Pavilion Gaming 15-cx0041ur to the ACPI EC
driver (Mia Kanashi).
- Add some mew ACPI backlight handling quirks and update some existing
ones (Hans de Goede).
- Make the ACPI backlight driver prefer the native backlight control
over vendor backlight control when possible (Hans de Goede).
- Drop unsetting ACPI APEI driver data on remove (Uwe Kleine-König).
- Use xchg_release() instead of cmpxchg() for updating new GHES cache
slots (Ard Biesheuvel).
- Clean up the ACPI APEI code (Sudeep Holla, Christophe JAILLET, Jay Lu).
- Add new I2C device enumeration quirks for Medion Lifetab S10346 and
Lenovo Yoga Tab 3 Pro (YT3-X90F) (Hans de Goede).
- Make the ACPI battery driver notify user space about adding new
battery hooks and removing the existing ones (Armin Wolf).
- Modify the pfr_update and pfr_telemetry drivers to use ACPI_FREE()
for freeing acpi_object structures to help diagnostics (Wang ShaoBo).
- Make the ACPI fan driver use sysfs_emit_at() in its sysfs interface
code (ye xingchen).
- Fix the _FIF package extraction failure handling in the ACPI fan
driver (Hanjun Guo).
- Fix the PCC mailbox handling error code path (Huisong Li).
- Avoid using PCC Opregions if there is no platform interrupt allocated
for this purpose (Huisong Li).
- Use sysfs_emit() instead of scnprintf() in the ACPI PAD driver and
CPPC library (ye xingchen).
- Fix some kernel-doc issues in the ACPI GSI processing code (Xiongfeng
Wang).
- Fix name memory leak in pnp_alloc_dev() (Yang Yingliang).
- Do not disable PNP devices on suspend when they cannot be re-enabled
on resume (Hans de Goede).
- Clean up the ACPI thermal driver a bit (Rafael Wysocki).
-----BEGIN PGP SIGNATURE-----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=GVzp
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and PNP updates from Rafael Wysocki:
"These include new code (for instance, support for the FFH address
space type and support for new firmware data structures in ACPICA),
some new quirks (mostly related to backlight handling and I2C
enumeration), a number of fixes and a fair amount of cleanups all
over.
Specifics:
- Update the ACPICA code in the kernel to the 20221020 upstream
version and fix a couple of issues in it:
- Make acpi_ex_load_op() match upstream implementation (Rafael
Wysocki)
- Add support for loong_arch-specific APICs in MADT (Huacai Chen)
- Add support for fixed PCIe wake event (Huacai Chen)
- Add EBDA pointer sanity checks (Vit Kabele)
- Avoid accessing VGA memory when EBDA < 1KiB (Vit Kabele)
- Add CCEL table support to both compiler/disassembler (Kuppuswamy
Sathyanarayanan)
- Add a couple of new UUIDs to the known UUID list (Bob Moore)
- Add support for FFH Opregion special context data (Sudeep
Holla)
- Improve warning message for "invalid ACPI name" (Bob Moore)
- Add support for CXL 3.0 structures (CXIMS & RDPAS) in the CEDT
table (Alison Schofield)
- Prepare IORT support for revision E.e (Robin Murphy)
- Finish support for the CDAT table (Bob Moore)
- Fix error code path in acpi_ds_call_control_method() (Rafael
Wysocki)
- Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage() (Li
Zetao)
- Update the version of the ACPICA code in the kernel (Bob Moore)
- Use ZERO_PAGE(0) instead of empty_zero_page in the ACPI device
enumeration code (Giulio Benetti)
- Change the return type of the ACPI driver remove callback to void
and update its users accordingly (Dawei Li)
- Add general support for FFH address space type and implement the
low- level part of it for ARM64 (Sudeep Holla)
- Fix stale comments in the ACPI tables parsing code and make it
print more messages related to MADT (Hanjun Guo, Huacai Chen)
- Replace invocations of generic library functions with more kernel-
specific counterparts in the ACPI sysfs interface (Christophe
JAILLET, Xu Panda)
- Print full name paths of ACPI power resource objects during
enumeration (Kane Chen)
- Eliminate a compiler warning regarding a missing function prototype
in the ACPI power management code (Sudeep Holla)
- Fix and clean up the ACPI processor driver (Rafael Wysocki, Li
Zhong, Colin Ian King, Sudeep Holla)
- Add quirk for the HP Pavilion Gaming 15-cx0041ur to the ACPI EC
driver (Mia Kanashi)
- Add some mew ACPI backlight handling quirks and update some
existing ones (Hans de Goede)
- Make the ACPI backlight driver prefer the native backlight control
over vendor backlight control when possible (Hans de Goede)
- Drop unsetting ACPI APEI driver data on remove (Uwe Kleine-König)
- Use xchg_release() instead of cmpxchg() for updating new GHES cache
slots (Ard Biesheuvel)
- Clean up the ACPI APEI code (Sudeep Holla, Christophe JAILLET, Jay
Lu)
- Add new I2C device enumeration quirks for Medion Lifetab S10346 and
Lenovo Yoga Tab 3 Pro (YT3-X90F) (Hans de Goede)
- Make the ACPI battery driver notify user space about adding new
battery hooks and removing the existing ones (Armin Wolf)
- Modify the pfr_update and pfr_telemetry drivers to use ACPI_FREE()
for freeing acpi_object structures to help diagnostics (Wang
ShaoBo)
- Make the ACPI fan driver use sysfs_emit_at() in its sysfs interface
code (ye xingchen)
- Fix the _FIF package extraction failure handling in the ACPI fan
driver (Hanjun Guo)
- Fix the PCC mailbox handling error code path (Huisong Li)
- Avoid using PCC Opregions if there is no platform interrupt
allocated for this purpose (Huisong Li)
- Use sysfs_emit() instead of scnprintf() in the ACPI PAD driver and
CPPC library (ye xingchen)
- Fix some kernel-doc issues in the ACPI GSI processing code
(Xiongfeng Wang)
- Fix name memory leak in pnp_alloc_dev() (Yang Yingliang)
- Do not disable PNP devices on suspend when they cannot be
re-enabled on resume (Hans de Goede)
- Clean up the ACPI thermal driver a bit (Rafael Wysocki)"
* tag 'acpi-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (67 commits)
ACPI: x86: Add skip i2c clients quirk for Medion Lifetab S10346
ACPI: APEI: EINJ: Refactor available_error_type_show()
ACPI: APEI: EINJ: Fix formatting errors
ACPI: processor: perflib: Adjust acpi_processor_notify_smm() return value
ACPI: processor: perflib: Rearrange acpi_processor_notify_smm()
ACPI: processor: perflib: Rearrange unregistration routine
ACPI: processor: perflib: Drop redundant parentheses
ACPI: processor: perflib: Adjust white space
ACPI: processor: idle: Drop unnecessary statements and parens
ACPI: thermal: Adjust critical.flags.valid check
ACPI: fan: Convert to use sysfs_emit_at() API
ACPICA: Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage()
ACPI: battery: Call power_supply_changed() when adding hooks
ACPI: use sysfs_emit() instead of scnprintf()
ACPI: x86: Add skip i2c clients quirk for Lenovo Yoga Tab 3 Pro (YT3-X90F)
ACPI: APEI: Remove a useless include
PNP: Do not disable devices on suspend when they cannot be re-enabled on resume
ACPI: processor: Silence missing prototype warnings
ACPI: processor_idle: Silence missing prototype warnings
ACPI: PM: Silence missing prototype warning
...
- Core:
- The timer_shutdown[_sync]() infrastructure:
Tearing down timers can be tedious when there are circular
dependencies to other things which need to be torn down. A prime
example is timer and workqueue where the timer schedules work and the
work arms the timer.
What needs to prevented is that pending work which is drained via
destroy_workqueue() does not rearm the previously shutdown
timer. Nothing in that shutdown sequence relies on the timer being
functional.
The conclusion was that the semantics of timer_shutdown_sync() should
be:
- timer is not enqueued
- timer callback is not running
- timer cannot be rearmed
Preventing the rearming of shutdown timers is done by discarding rearm
attempts silently. A warning for the case that a rearm attempt of a
shutdown timer is detected would not be really helpful because it's
entirely unclear how it should be acted upon. The only way to address
such a case is to add 'if (in_shutdown)' conditionals all over the
place. This is error prone and in most cases of teardown not required
all.
- The real fix for the bluetooth HCI teardown based on
timer_shutdown_sync().
A larger scale conversion to timer_shutdown_sync() is work in
progress.
- Consolidation of VDSO time namespace helper functions
- Small fixes for timer and timerqueue
- Drivers:
- Prevent integer overflow on the XGene-1 TVAL register which causes
an never ending interrupt storm.
- The usual set of new device tree bindings
- Small fixes and improvements all over the place
-----BEGIN PGP SIGNATURE-----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=JlDe
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2022-12-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Updates for timers, timekeeping and drivers:
Core:
- The timer_shutdown[_sync]() infrastructure:
Tearing down timers can be tedious when there are circular
dependencies to other things which need to be torn down. A prime
example is timer and workqueue where the timer schedules work and
the work arms the timer.
What needs to prevented is that pending work which is drained via
destroy_workqueue() does not rearm the previously shutdown timer.
Nothing in that shutdown sequence relies on the timer being
functional.
The conclusion was that the semantics of timer_shutdown_sync()
should be:
- timer is not enqueued
- timer callback is not running
- timer cannot be rearmed
Preventing the rearming of shutdown timers is done by discarding
rearm attempts silently.
A warning for the case that a rearm attempt of a shutdown timer is
detected would not be really helpful because it's entirely unclear
how it should be acted upon. The only way to address such a case is
to add 'if (in_shutdown)' conditionals all over the place. This is
error prone and in most cases of teardown not required all.
- The real fix for the bluetooth HCI teardown based on
timer_shutdown_sync().
A larger scale conversion to timer_shutdown_sync() is work in
progress.
- Consolidation of VDSO time namespace helper functions
- Small fixes for timer and timerqueue
Drivers:
- Prevent integer overflow on the XGene-1 TVAL register which causes
an never ending interrupt storm.
- The usual set of new device tree bindings
- Small fixes and improvements all over the place"
* tag 'timers-core-2022-12-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits)
dt-bindings: timer: renesas,cmt: Add r8a779g0 CMT support
dt-bindings: timer: renesas,tmu: Add r8a779g0 support
clocksource/drivers/arm_arch_timer: Use kstrtobool() instead of strtobool()
clocksource/drivers/timer-ti-dm: Fix missing clk_disable_unprepare in dmtimer_systimer_init_clock()
clocksource/drivers/timer-ti-dm: Clear settings on probe and free
clocksource/drivers/timer-ti-dm: Make timer_get_irq static
clocksource/drivers/timer-ti-dm: Fix warning for omap_timer_match
clocksource/drivers/arm_arch_timer: Fix XGene-1 TVAL register math error
clocksource/drivers/timer-npcm7xx: Enable timer 1 clock before use
dt-bindings: timer: nuvoton,npcm7xx-timer: Allow specifying all clocks
dt-bindings: timer: rockchip: Add rockchip,rk3128-timer
clockevents: Repair kernel-doc for clockevent_delta2ns()
clocksource/drivers/ingenic-ost: Define pm functions properly in platform_driver struct
clocksource/drivers/sh_cmt: Access registers according to spec
vdso/timens: Refactor copy-pasted find_timens_vvar_page() helper into one copy
Bluetooth: hci_qca: Fix the teardown problem for real
timers: Update the documentation to reflect on the new timer_shutdown() API
timers: Provide timer_shutdown[_sync]()
timers: Add shutdown mechanism to the internal functions
timers: Split [try_to_]del_timer[_sync]() to prepare for shutdown mode
...
Merge ACPI changes related to device enumeration, device object
managenet, operation region handling, table parsing and sysfs
interface:
- Use ZERO_PAGE(0) instead of empty_zero_page in the ACPI device
enumeration code (Giulio Benetti).
- Change the return type of the ACPI driver remove callback to void and
update its users accordingly (Dawei Li).
- Add general support for FFH address space type and implement the low-
level part of it for ARM64 (Sudeep Holla).
- Fix stale comments in the ACPI tables parsing code and make it print
more messages related to MADT (Hanjun Guo, Huacai Chen).
- Replace invocations of generic library functions with more kernel-
specific counterparts in the ACPI sysfs interface (Christophe JAILLET,
Xu Panda).
* acpi-scan:
ACPI: scan: substitute empty_zero_page with helper ZERO_PAGE(0)
* acpi-bus:
ACPI: FFH: Silence missing prototype warnings
ACPI: make remove callback of ACPI driver void
ACPI: bus: Fix the _OSC capability check for FFH OpRegion
arm64: Add architecture specific ACPI FFH Opregion callbacks
ACPI: Implement a generic FFH Opregion handler
* acpi-tables:
ACPI: tables: Fix the stale comments for acpi_locate_initial_tables()
ACPI: tables: Print CORE_PIC information when MADT is parsed
* acpi-sysfs:
ACPI: sysfs: use sysfs_emit() to instead of scnprintf()
ACPI: sysfs: Use kstrtobool() instead of strtobool()
Remove tests for SPI device or I2C client to be non-NULL because
driver core will never call driver's probe method without having
a valid device structure.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The error message in __crb_relinquish_locality() mentions requestAccess
instead of Relinquish. Fix it.
Fixes: 888d867df4 ("tpm: cmd_ready command can be issued only after granting locality")
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The ftpm_mod_init() returns the driver_register() directly without checking
its return value, if driver_register() failed, the ftpm_tee_plat_driver is
not unregistered.
Fix by unregister ftpm_tee_plat_driver when driver_register() failed.
Fixes: 9f1944c23c ("tpm_ftpm_tee: register driver on TEE bus")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Maxim Uvarov <maxim.uvarov@linaro.org>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
In check_acpi_tpm2(), we get the TPM2 table just to make
sure the table is there, not used after the init, so the
acpi_put_table() should be added to release the ACPI memory.
Fixes: 4cb586a188 ("tpm_tis: Consolidate the platform and acpi probe flow")
Cc: stable@vger.kernel.org
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
In crb_acpi_add(), we get the TPM2 table to retrieve information
like start method, and then assign them to the priv data, so the
TPM2 table is not used after the init, should be freed, call
acpi_put_table() to fix the memory leak.
Fixes: 30fc8d138e ("tpm: TPM 2.0 CRB Interface")
Cc: stable@vger.kernel.org
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The start and length of the event log area are obtained from
TPM2 or TCPA table, so we call acpi_get_table() to get the
ACPI information, but the acpi_get_table() should be coupled with
acpi_put_table() to release the ACPI memory, add the acpi_put_table()
properly to fix the memory leak.
While we are at it, remove the redundant empty line at the
end of the tpm_read_log_acpi().
Fixes: 0bfb237460 ("tpm: Move eventlog files to a subdirectory")
Fixes: 85467f63a0 ("tpm: Add support for event log pointer found in TPM2 ACPI table")
Cc: stable@vger.kernel.org
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The check for cancelled request depends on the VID of the chip, but
some chips share VID which shouldn't share their cancellation
behavior. This is the case for the Nuvoton NPCT75X, which should use
the default cancellation check, not the Winbond one.
To avoid changing the existing behavior, add a new flag to indicate
that the chip should use the default cancellation check and set it
for the I2C TPM2 TIS driver.
Fixes: bbc23a07b0 ("tpm: Add tpm_tis_i2c backend for tpm_tis_core")
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Tested-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The sanity check mask for TPM_INT_ENABLE register was off by 8 bits,
resulting in failure to probe if the TPM_INT_ENABLE register was a
valid value.
Fixes: bbc23a07b0 ("tpm: Add tpm_tis_i2c backend for tpm_tis_core")
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Switch the driver from legacy gpio API (that uses flat GPIO numbering)
to the newer gpiod API (which used descriptors and respects line
polarities specified in ACPI or device tree).
Because gpio handling code for SPI and I2C variants duplicates each
other it is moved into the core code for the driver.
Also, it seems that the driver never assigned tpm_dev->io_lpcpd in the
past, so gpio-based power management was most likely not working ever.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Drop support for platform data from the driver because there are no
users of st33zp24_platform_data structure in the mainline kernel.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Currently tpm transactions are executed unconditionally in
tpm_pm_suspend() function, which may lead to races with other tpm
accessors in the system.
Specifically, the hw_random tpm driver makes use of tpm_get_random(),
and this function is called in a loop from a kthread, which means it's
not frozen alongside userspace, and so can race with the work done
during system suspend:
tpm tpm0: tpm_transmit: tpm_recv: error -52
tpm tpm0: invalid TPM_STS.x 0xff, dumping stack for forensics
CPU: 0 PID: 1 Comm: init Not tainted 6.1.0-rc5+ #135
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-20220807_005459-localhost 04/01/2014
Call Trace:
tpm_tis_status.cold+0x19/0x20
tpm_transmit+0x13b/0x390
tpm_transmit_cmd+0x20/0x80
tpm1_pm_suspend+0xa6/0x110
tpm_pm_suspend+0x53/0x80
__pnp_bus_suspend+0x35/0xe0
__device_suspend+0x10f/0x350
Fix this by calling tpm_try_get_ops(), which itself is a wrapper around
tpm_chip_start(), but takes the appropriate mutex.
Signed-off-by: Jan Dabros <jsd@semihalf.com>
Reported-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Jason A. Donenfeld <Jason@zx2c4.com>
Tested-by: Vlastimil Babka <vbabka@suse.cz>
Link: https://lore.kernel.org/all/c5ba47ef-393f-1fba-30bd-1230d1b4b592@suse.cz/
Cc: stable@vger.kernel.org
Fixes: e891db1a18 ("tpm: turn on TPM on suspend for TPM 1.x")
[Jason: reworked commit message, added metadata]
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
del_singleshot_timer_sync() used to be an optimization for deleting timers
which are not rearmed from the timer callback function.
This optimization turned out to be broken and got mapped to
del_timer_sync() about 17 years ago.
Get rid of the undocumented indirection and use del_timer_sync() directly.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Link: https://lore.kernel.org/r/20221123201624.706987932@linutronix.de
For bus-based driver, device removal is implemented as:
1 device_remove()->
2 bus->remove()->
3 driver->remove()
Driver core needs no inform from callee(bus driver) about the
result of remove callback. In that case, commit fc7a6209d5
("bus: Make remove callback return void") forces bus_type::remove
be void-returned.
Now we have the situation that both 1 & 2 of calling chain are
void-returned, so it does not make much sense for 3(driver->remove)
to return non-void to its caller.
So the basic idea behind this change is making remove() callback of
any bus-based driver to be void-returned.
This change, for itself, is for device drivers based on acpi-bus.
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Lee Jones <lee@kernel.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dawei Li <set_pte_at@outlook.com>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for drivers/platform/surface/*
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-----BEGIN PGP SIGNATURE-----
iIgEABYKADAWIQRE6pSOnaBC00OEHEIaerohdGur0gUCYzylIxIcamFya2tvQGtl
cm5lbC5vcmcACgkQGnq6IXRrq9IDBwEAmoMCHzq2JseDBj21H5iLXrB2G5Vl80a9
UW363r09ht4A/RnvCIdFcaYYdawhQbcBWkRSYezDOPu6hopwrElb9+ID
=l5my
-----END PGP SIGNATURE-----
Merge tag 'tpmdd-next-v6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm updates from Jarkko Sakkinen:
"Just a few bug fixes this time"
* tag 'tpmdd-next-v6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
selftest: tpm2: Add Client.__del__() to close /dev/tpm* handle
security/keys: Remove inconsistent __user annotation
char: move from strlcpy with unused retval to strscpy
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The value returned by an i2c driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)
So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour, all callbacks were prepared to
return 0 before.
Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com>
Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Crt Mori <cmo@melexis.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/*
Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5
Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio
Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860
Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b
Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes
Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power
Acked-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
In commit 0aa698787a ("tpm: Add Upgrade/Reduced mode support for
TPM2 modules") it was said that:
"If the TPM is in Failure mode, it will successfully respond to both
tpm2_do_selftest() and tpm2_startup() calls. Although, will fail to
answer to tpm2_get_cc_attrs_tbl(). Use this fact to conclude that TPM
is in Failure mode."
But a check was never added in the commit when calling
tpm2_get_cc_attrs_tbl() to conclude that the TPM is in Failure mode.
This commit corrects this by adding a check.
Fixes: 0aa698787a ("tpm: Add Upgrade/Reduced mode support for TPM2 modules")
Cc: stable@vger.kernel.org # v5.17+
Signed-off-by: Mårten Lindahl <marten.lindahl@axis.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Eliminate the following coccicheck warning:
./drivers/char/tpm/tpm_tis_i2c.c:379:3-8: No need to set .owner here. The core will do it.
Remove .owner field if calls are used which set it automatically
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Implement the TCG I2C Interface driver, as specified in the TCG PC
Client Platform TPM Profile (PTP) specification for TPM 2.0 v1.04
revision 14, section 8, I2C Interface Definition.
This driver supports Guard Times. That is, if required by the TPM, the
driver has to wait by a vendor-specific time after each I2C read/write.
The specific time is read from the TPM_I2C_INTERFACE_CAPABILITY register.
Unfortunately, the TCG specified almost but not quite compatible
register addresses. Therefore, the TIS register addresses need to be
mapped to I2C ones. The locality is stripped because for now, only
locality 0 is supported.
Add a sanity check to I2C reads of e.g. TPM_ACCESS and TPM_STS. This is
to detect communication errors and issues due to non-standard behaviour
(E.g. the clock stretching quirk in the BCM2835, see 4dbfb5f440). In
case the sanity check fails, attempt a retry.
Co-developed-by: Johannes Holland <johannes.holland@infineon.com>
Signed-off-by: Johannes Holland <johannes.holland@infineon.com>
Co-developed-by: Amir Mizinski <amirmizi6@gmail.com>
Signed-off-by: Amir Mizinski <amirmizi6@gmail.com>
Signed-off-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Some TPMs, e.g. those implementing the I2C variant of TIS, can verify
data transfers to/from the FIFO with a CRC. The CRC is calculated over
the entirety of the FIFO register. Since the phy_ops layer is not aware
when the core layer is done reading/writing the FIFO, CRC verification
must be triggered from the core layer. To this end, add an optional
phy_ops API call.
Co-developed-by: Johannes Holland <johannes.holland@infineon.com>
Signed-off-by: Johannes Holland <johannes.holland@infineon.com>
Signed-off-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
In case a TPM in failure mode is detected, the TPM should be accessible
through a transparent communication channel for analysing purposes (e.g.
TPM_GetTestResult) or a field upgrade. Since a TPM in failure mode has
similar reduced functionality as in field upgrade mode, the flag
TPM_CHIP_FLAG_FIRMWARE_UPGRADE is also valid.
As described in TCG TPM Main Part1 Design Principles, Revision 116,
chapter 9.2.1. the TPM also allows an update function in case a TPM is
in failure mode.
If the TPM in failure mode is detected, the function tpm1_auto_startup()
sets TPM_CHIP_FLAG_FIRMWARE_UPGRADE flag, which is used later during
driver initialization/deinitialization to disable functionality which
makes no sense or will fail in the current TPM state. The following
functionality is affected:
* Do not register TPM as a hwrng
* Do not get pcr allocation
* Do not register sysfs entries which provide information impossible to
obtain in limited mode
Signed-off-by: Stefan Mahnke-Hartmann <stefan.mahnke-hartmann@infineon.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
- Strictened validation of key hashes for SYSTEM_BLACKLIST_HASH_LIST. An
invalid hash format causes a compilation error. Previously, they got
included to the kernel binary but were silently ignored at run-time.
- Allow root user to append new hashes to the blacklist keyring.
- Trusted keys backed with Cryptographic Acceleration and Assurance Module
(CAAM), which part of some of the new NXP's SoC's. Now there is total
three hardware backends for trusted keys: TPM, ARM TEE and CAAM.
- A scattered set of fixes and small improvements for the TPM driver.
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
-----BEGIN PGP SIGNATURE-----
iIgEABYIADAWIQRE6pSOnaBC00OEHEIaerohdGur0gUCYoux6xIcamFya2tvQGtl
cm5lbC5vcmcACgkQGnq6IXRrq9LTQgEA4zRrlmLPjhZ1iZpPZiyBBv5eOx20/c+y
R7tCfJFB2+ABAOT1E885vt+GgKTY4mYloHJ+ZtnTIf1QRMP6EoSX+TwP
=oBOO
-----END PGP SIGNATURE-----
Merge tag 'tpmdd-next-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm updates from Jarkko Sakkinen:
- Tightened validation of key hashes for SYSTEM_BLACKLIST_HASH_LIST. An
invalid hash format causes a compilation error. Previously, they got
included to the kernel binary but were silently ignored at run-time.
- Allow root user to append new hashes to the blacklist keyring.
- Trusted keys backed with Cryptographic Acceleration and Assurance
Module (CAAM), which part of some of the new NXP's SoC's. Now there
is total three hardware backends for trusted keys: TPM, ARM TEE and
CAAM.
- A scattered set of fixes and small improvements for the TPM driver.
* tag 'tpmdd-next-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
MAINTAINERS: add KEYS-TRUSTED-CAAM
doc: trusted-encrypted: describe new CAAM trust source
KEYS: trusted: Introduce support for NXP CAAM-based trusted keys
crypto: caam - add in-kernel interface for blob generator
crypto: caam - determine whether CAAM supports blob encap/decap
KEYS: trusted: allow use of kernel RNG for key material
KEYS: trusted: allow use of TEE as backend without TCG_TPM support
tpm: Add field upgrade mode support for Infineon TPM2 modules
tpm: Fix buffer access in tpm2_get_tpm_pt()
char: tpm: cr50_i2c: Suppress duplicated error message in .remove()
tpm: cr50: Add new device/vendor ID 0x504a6666
tpm: Remove read16/read32/write32 calls from tpm_tis_phy_ops
tpm: ibmvtpm: Correct the return value in tpm_ibmvtpm_probe()
tpm/tpm_ftpm_tee: Return true/false (not 1/0) from bool functions
certs: Explain the rationale to call panic()
certs: Allow root user to append signed hashes to the blacklist keyring
certs: Check that builtin blacklist hashes are valid
certs: Make blacklist_vet_description() more strict
certs: Factor out the blacklist hash creation
tools/certs: Add print-cert-tbs-hash.sh
TPM2_GetCapability with a capability that has the property type value
of TPM_PT_TOTAL_COMMANDS returns a zero length list, when an Infineon
TPM2 is in field upgrade mode.
Since an Infineon TPM2.0 in field upgrade mode returns RC_SUCCESS on
TPM2_Startup, the field upgrade mode has to be detected by
TPM2_GetCapability.
Signed-off-by: Stefan Mahnke-Hartmann <stefan.mahnke-hartmann@infineon.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Under certain conditions uninitialized memory will be accessed.
As described by TCG Trusted Platform Module Library Specification,
rev. 1.59 (Part 3: Commands), if a TPM2_GetCapability is received,
requesting a capability, the TPM in field upgrade mode may return a
zero length list.
Check the property count in tpm2_get_tpm_pt().
Fixes: 2ab3241161 ("tpm: migrate tpm2_get_tpm_pt() to use struct tpm_buf")
Cc: stable@vger.kernel.org
Signed-off-by: Stefan Mahnke-Hartmann <stefan.mahnke-hartmann@infineon.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Returning an error value in an i2c remove callback results in an error
message being emitted by the i2c core, but otherwise it doesn't make a
difference. The device goes away anyhow and the devm cleanups are
called.
As tpm_cr50_i2c_remove() emits an error message already and the
additional error message by the i2c core doesn't add any useful
information, change the return value to zero to suppress this error
message.
Note that if i2c_clientdata is NULL, there is something really fishy.
Assuming no memory corruption happened (then all bets are lost anyhow),
tpm_cr50_i2c_remove() is only called after tpm_cr50_i2c_probe() returned
successfully. So there was a tpm chip registered before and after
tpm_cr50_i2c_remove() its privdata is freed but the associated character
device isn't removed. If after that happened userspace accesses the
character device it's likely that the freed memory is accessed. For that
reason the warning message is made a bit more frightening.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Accept one additional numerical value of DID:VID for next generation
Google TPM with new firmware, to be used in future Chromebooks.
The TPM with the new firmware has the code name TI50, and is going to
use the same interfaces.
Signed-off-by: Jes B. Klinke <jbk@chromium.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Only tpm_tis and tpm_tis_synquacer have a dedicated way to access
multiple bytes at once, every other driver will just fall back to
read_bytes/write_bytes. Therefore, remove the read16/read32/write32
calls and move their logic to read_bytes/write_bytes.
Suggested-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Johannes Holland <johannes.holland@infineon.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Currently it returns zero when CRQ response timed out, it should return
an error code instead.
Fixes: d8d74ea3c0 ("tpm: ibmvtpm: Wait for buffer to be set before proceeding")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Return boolean values ("true" or "false") instead of 1 or 0 from bool
functions.
Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Simplify tpmfront's ring creation and removal via xenbus_setup_ring()
and xenbus_teardown_ring(), which are provided exactly for the use
pattern as seen in this driver.
Signed-off-by: Juergen Gross <jgross@suse.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCYkF9UwAKCRCAXGG7T9hj
vsXpAPwKXI4WIQcvnVCdULQfuXpA1TbD5XZuS9OuiN/OxWHbzAEA1VHWTmS+tpZ1
ptOyoGhAWhTGeplToobDSGz5qTXEPAI=
=FaKX
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.18-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- A bunch of minor cleanups
- A fix for kexec in Xen dom0 when executed on a high cpu number
- A fix for resuming after suspend of a Xen guest with assigned PCI
devices
- A fix for a crash due to not disabled preemption when resuming as Xen
dom0
* tag 'for-linus-5.18-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: fix is_xen_pmu()
xen: don't hang when resuming PCI device
arch:x86:xen: Remove unnecessary assignment in xen_apic_read()
xen/grant-table: remove readonly parameter from functions
xen/grant-table: remove gnttab_*transfer*() functions
drivers/xen: use helper macro __ATTR_RW
x86/xen: Fix kerneldoc warning
xen: delay xen_hvm_init_time_ops() if kdump is boot on vcpu>=32
xen: use time_is_before_eq_jiffies() instead of open coding it
- Various buffer and array bounds related fixes
-----BEGIN PGP SIGNATURE-----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=gm8R
-----END PGP SIGNATURE-----
Merge tag 'bounds-fixes-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull bounds fixes from Kees Cook:
"These are a handful of buffer and array bounds fixes that I've been
carrying in preparation for the coming memcpy improvements and the
enabling of '-Warray-bounds' globally.
There are additional similar fixes in other maintainer's trees, but
these ended up getting carried by me. :)"
* tag 'bounds-fixes-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
media: omap3isp: Use struct_group() for memcpy() region
tpm: vtpm_proxy: Check length to avoid compiler warning
alpha: Silence -Warray-bounds warnings
m68k: cmpxchg: Dereference matching size
intel_th: msu: Use memset_startat() for clearing hw header
KVM: x86: Replace memset() "optimization" with normal per-field writes
The overwhelming bulk of this pull request is a change from Uwe
Kleine-König which changes the return type of the remove() function to
void as part of some wider work he's doing to do this for all bus types,
causing updates to most SPI device drivers. The branch with that on has
been cross merged with a couple of other trees which added new SPI
drivers this cycle, I'm not expecting any build issues resulting from
the change.
Otherwise it's been a relatively quiet release with some new device
support, a few minor features and the welcome completion of the
conversion of the subsystem to use GPIO descriptors rather than numbers:
- Change return type of remove() to void.
- Completion of the conversion of SPI controller drivers to use GPIO
descriptors rather than numbers.
- Quite a few DT schema conversions.
- Support for multiple SPI devices on a bus in ACPI systems.
- Big overhaul of the PXA2xx SPI driver.
- Support for AMD AMDI0062, Intel Raptor Lake, Mediatek MT7986 and
MT8186, nVidia Tegra210 and Tegra234, Renesas RZ/V2L, Tesla FSD and
Sunplus SP7021.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmI4b+8ACgkQJNaLcl1U
h9AB+Qf/WhPzDSCdhK1repnSmEpRNs/J6hItmY2H6pTQaWALpfTB0+p1Nb5tAotg
fHbu6a2AsiiwWt+tDal44GFYhS0CDSOT4hqgLV8msyDDPPJqqr7A2dbu7YrCjTVI
TgNZNwxW7c2LgqBXR9GV7NPWYoxYxveoYh+L+05MSuSQxSOvPl6LUZiZPnPufQM6
dCpEh19atrtasFg3rFnslWBd2C3h8hb6YT7vUZs9gxhg3FvSgpYQwzz5SfFgHXK6
Rg07m8fDTSjf2qo1C4pc/d1Ni1xBe7aHKMtjtR3jJ4q8QqiawfCcvvOep/Iaec1+
s3qnDthohWMJoF1W6ERf3HiAgNIfhg==
=4tlR
-----END PGP SIGNATURE-----
Merge tag 'spi-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"The overwhelming bulk of this pull request is a change from Uwe
Kleine-König which changes the return type of the remove() function to
void as part of some wider work he's doing to do this for all bus
types, causing updates to most SPI device drivers. The branch with
that on has been cross merged with a couple of other trees which added
new SPI drivers this cycle, I'm not expecting any build issues
resulting from the change.
Otherwise it's been a relatively quiet release with some new device
support, a few minor features and the welcome completion of the
conversion of the subsystem to use GPIO descriptors rather than
numbers:
- Change return type of remove() to void.
- Completion of the conversion of SPI controller drivers to use GPIO
descriptors rather than numbers.
- Quite a few DT schema conversions.
- Support for multiple SPI devices on a bus in ACPI systems.
- Big overhaul of the PXA2xx SPI driver.
- Support for AMD AMDI0062, Intel Raptor Lake, Mediatek MT7986 and
MT8186, nVidia Tegra210 and Tegra234, Renesas RZ/V2L, Tesla FSD and
Sunplus SP7021"
[ And this is obviously where that spi change that snuck into the
regulator tree _should_ have been :^]
* tag 'spi-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (124 commits)
spi: fsi: Implement a timeout for polling status
spi: Fix erroneous sgs value with min_t()
spi: tegra20: Use of_device_get_match_data()
spi: mediatek: add ipm design support for MT7986
spi: Add compatible for MT7986
spi: sun4i: fix typos in comments
spi: mediatek: support tick_delay without enhance_timing
spi: Update clock-names property for arm pl022
spi: rockchip-sfc: fix platform_get_irq.cocci warning
spi: s3c64xx: Add spi port configuration for Tesla FSD SoC
spi: dt-bindings: samsung: Add fsd spi compatible
spi: topcliff-pch: Prevent usage of potentially stale DMA device
spi: tegra210-quad: combined sequence mode
spi: tegra210-quad: add acpi support
spi: npcm-fiu: Fix typo ("npxm")
spi: Fix Tegra QSPI example
spi: qup: replace spin_lock_irqsave by spin_lock in hard IRQ
spi: cadence: fix platform_get_irq.cocci warning
spi: Update NXP Flexspi maintainer details
dt-bindings: mfd: maxim,max77802: Convert to dtschema
...
The gnttab_end_foreign_access() family of functions is taking a
"readonly" parameter, which isn't used. Remove it from the function
parameters.
Signed-off-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220311103429.12845-3-jgross@suse.com
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
As part of the series conversion to remove nested TPM operations:
https://lore.kernel.org/all/20190205224723.19671-1-jarkko.sakkinen@linux.intel.com/
exposure of the chip->tpm_mutex was removed from much of the upper
level code. In this conversion, tpm2_del_space() was missed. This
didn't matter much because it's usually called closely after a
converted operation, so there's only a very tiny race window where the
chip can be removed before the space flushing is done which causes a
NULL deref on the mutex. However, there are reports of this window
being hit in practice, so fix this by converting tpm2_del_space() to
use tpm_try_get_ops(), which performs all the teardown checks before
acquring the mutex.
Cc: stable@vger.kernel.org # 5.4.x
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The following sequence of operations results in a refcount warning:
1. Open device /dev/tpmrm.
2. Remove module tpm_tis_spi.
3. Write a TPM command to the file descriptor opened at step 1.
------------[ cut here ]------------
WARNING: CPU: 3 PID: 1161 at lib/refcount.c:25 kobject_get+0xa0/0xa4
refcount_t: addition on 0; use-after-free.
Modules linked in: tpm_tis_spi tpm_tis_core tpm mdio_bcm_unimac brcmfmac
sha256_generic libsha256 sha256_arm hci_uart btbcm bluetooth cfg80211 vc4
brcmutil ecdh_generic ecc snd_soc_core crc32_arm_ce libaes
raspberrypi_hwmon ac97_bus snd_pcm_dmaengine bcm2711_thermal snd_pcm
snd_timer genet snd phy_generic soundcore [last unloaded: spi_bcm2835]
CPU: 3 PID: 1161 Comm: hold_open Not tainted 5.10.0ls-main-dirty #2
Hardware name: BCM2711
[<c0410c3c>] (unwind_backtrace) from [<c040b580>] (show_stack+0x10/0x14)
[<c040b580>] (show_stack) from [<c1092174>] (dump_stack+0xc4/0xd8)
[<c1092174>] (dump_stack) from [<c0445a30>] (__warn+0x104/0x108)
[<c0445a30>] (__warn) from [<c0445aa8>] (warn_slowpath_fmt+0x74/0xb8)
[<c0445aa8>] (warn_slowpath_fmt) from [<c08435d0>] (kobject_get+0xa0/0xa4)
[<c08435d0>] (kobject_get) from [<bf0a715c>] (tpm_try_get_ops+0x14/0x54 [tpm])
[<bf0a715c>] (tpm_try_get_ops [tpm]) from [<bf0a7d6c>] (tpm_common_write+0x38/0x60 [tpm])
[<bf0a7d6c>] (tpm_common_write [tpm]) from [<c05a7ac0>] (vfs_write+0xc4/0x3c0)
[<c05a7ac0>] (vfs_write) from [<c05a7ee4>] (ksys_write+0x58/0xcc)
[<c05a7ee4>] (ksys_write) from [<c04001a0>] (ret_fast_syscall+0x0/0x4c)
Exception stack(0xc226bfa8 to 0xc226bff0)
bfa0: 00000000 000105b4 00000003 beafe664 00000014 00000000
bfc0: 00000000 000105b4 000103f8 00000004 00000000 00000000 b6f9c000 beafe684
bfe0: 0000006c beafe648 0001056c b6eb6944
---[ end trace d4b8409def9b8b1f ]---
The reason for this warning is the attempt to get the chip->dev reference
in tpm_common_write() although the reference counter is already zero.
Since commit 8979b02aaf ("tpm: Fix reference count to main device") the
extra reference used to prevent a premature zero counter is never taken,
because the required TPM_CHIP_FLAG_TPM2 flag is never set.
Fix this by moving the TPM 2 character device handling from
tpm_chip_alloc() to tpm_add_char_device() which is called at a later point
in time when the flag has been set in case of TPM2.
Commit fdc915f7f7 ("tpm: expose spaces via a device link /dev/tpmrm<n>")
already introduced function tpm_devs_release() to release the extra
reference but did not implement the required put on chip->devs that results
in the call of this function.
Fix this by putting chip->devs in tpm_chip_unregister().
Finally move the new implementation for the TPM 2 handling into a new
function to avoid multiple checks for the TPM_CHIP_FLAG_TPM2 flag in the
good case and error cases.
Cc: stable@vger.kernel.org
Fixes: fdc915f7f7 ("tpm: expose spaces via a device link /dev/tpmrm<n>")
Fixes: 8979b02aaf ("tpm: Fix reference count to main device")
Co-developed-by: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Make use of the struct_size() helper instead of an open-coded version,
in order to avoid any potential type mistakes or integer overflows that,
in the worse scenario, could lead to heap overflows.
Also, address the following sparse warning:
drivers/char/tpm/xen-tpmfront.c:131:16: warning: using sizeof on a flexible structure
Link: https://github.com/KSPP/linux/issues/160
Link: https://github.com/KSPP/linux/issues/174
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
When an invalid (non existing) handle is used in a TPM command,
that uses the resource manager interface (/dev/tpmrm0) the resource
manager tries to load it from its internal cache, but fails and
the tpm_dev_transmit returns an -EINVAL error to the caller.
The existing async handler doesn't handle these error cases
currently and the condition in the poll handler never returns
mask with EPOLLIN set.
The result is that the poll call blocks and the application gets stuck
until the user_read_timer wakes it up after 120 sec.
Change the tpm_dev_async_work function to handle error conditions
returned from tpm_dev_transmit they are also reflected in the poll mask
and a correct error code could passed back to the caller.
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: <linux-integrity@vger.kernel.org>
Cc: <stable@vger.kernel.org>
Cc: <linux-kernel@vger.kernel.org>
Fixes: 9e1b74a63f ("tpm: add support for nonblocking operation")
Tested-by: Jarkko Sakkinen<jarkko@kernel.org>
Signed-off-by: Tadeusz Struk <tstruk@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
When building with -Warray-bounds under GCC 11.2, this warning was
emitted:
In function 'memset',
inlined from 'vtpm_proxy_fops_read' at drivers/char/tpm/tpm_vtpm_proxy.c:102:2:
./include/linux/fortify-string.h:43:33: warning: '__builtin_memset' pointer overflow between offset 164 and size [2147483648, 4294967295]
[-Warray-bounds]
43 | #define __underlying_memset __builtin_memset
| ^
This warning appears to be triggered due to the "count < len"
check in vtpm_proxy_fops_read() splitting the CFG[1], and the compiler
attempting to reason about the possible value range in len compared
to the buffer size.
In order to silence this warning, and to keep this code robust if the
use of proxy_dev->req_len ever changes in the future, explicitly check
the size of len before reaching the memset().
[1] https://lore.kernel.org/lkml/CAG48ez1iTF9KegKJrW5a3WzXgCPZJ73nS2_e5esKJRppdzvv8g@mail.gmail.com
Cc: Peter Huewe <peterhuewe@gmx.de>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-integrity@vger.kernel.org
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Link: https://lore.kernel.org/lkml/4b59d305-6858-1514-751a-37853ad777be@linux.ibm.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220119184354.3367603-1-keescook@chromium.org
The value returned by an spi driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)
So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour, all callbacks were prepared to
return 0 before.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Claudius Heine <ch@denx.de>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
Acked-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Acked-by: Łukasz Stelmach <l.stelmach@samsung.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220123175201.34839-6-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
When using the tpm_tis-spi driver on a system missing the physical TPM,
a null pointer exception was observed.
[ 0.938677] Unable to handle kernel NULL pointer dereference at virtual address 00000004
[ 0.939020] pgd = 10c753cb
[ 0.939237] [00000004] *pgd=00000000
[ 0.939808] Internal error: Oops: 5 [#1] SMP ARM
[ 0.940157] CPU: 0 PID: 48 Comm: kworker/u4:1 Not tainted 5.15.10-dd1e40c #1
[ 0.940364] Hardware name: Generic DT based system
[ 0.940601] Workqueue: events_unbound async_run_entry_fn
[ 0.941048] PC is at tpm_tis_remove+0x28/0xb4
[ 0.941196] LR is at tpm_tis_core_init+0x170/0x6ac
This is due to an attempt in 'tpm_tis_remove' to use the drvdata, which
was not initialized in 'tpm_tis_core_init' prior to the first error.
Move the initialization of drvdata earlier so 'tpm_tis_remove' has
access to it.
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Fixes: 79ca6f74da ("tpm: fix Atmel TPM crash caused by too frequent queries")
Cc: stable@vger.kernel.org
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Some SPI controller drivers unregister the controller in the shutdown
handler (e.g. BCM2835). If such a controller is used with a TPM 2 slave
chip->ops may be accessed when it is already NULL:
At system shutdown the pre-shutdown handler tpm_class_shutdown() shuts down
TPM 2 and sets chip->ops to NULL. Then at SPI controller unregistration
tpm_tis_spi_remove() is called and eventually calls tpm_del_char_device()
which tries to shut down TPM 2 again. Thereby it accesses chip->ops again:
(tpm_del_char_device calls tpm_chip_start which calls tpm_clk_enable which
calls chip->ops->clk_enable).
Avoid the NULL pointer access by testing if chip->ops is valid and skipping
the TPM 2 shutdown procedure in case it is NULL.
Cc: stable@vger.kernel.org
Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Fixes: 39d0099f94 ("powerpc/pseries: Add shutdown() to vio_driver and vio_bus")
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
If something went wrong during the TPM firmware upgrade, like power
failure or the firmware image file get corrupted, the TPM might end
up in Upgrade or Failure mode upon the next start. The state is
persistent between the TPM power cycle/restart.
According to TPM specification:
* If the TPM is in Upgrade mode, it will answer with TPM2_RC_UPGRADE
to all commands except TPM2_FieldUpgradeData(). It may also accept
other commands if it is able to complete them using the previously
installed firmware.
* If the TPM is in Failure mode, it will allow performing TPM
initialization but will not provide any crypto operations.
Will happily respond to Field Upgrade calls.
Change the behavior of the tpm2_auto_startup(), so it detects the active
running mode of the TPM by adding the following checks. If
tpm2_do_selftest() call returns TPM2_RC_UPGRADE, the TPM is in Upgrade
mode.
If the TPM is in Failure mode, it will successfully respond to both
tpm2_do_selftest() and tpm2_startup() calls. Although, will fail to
answer to tpm2_get_cc_attrs_tbl(). Use this fact to conclude that TPM is
in Failure mode.
If detected that the TPM is in the Upgrade or Failure mode, the function
sets TPM_CHIP_FLAG_FIRMWARE_UPGRADE_MODE flag.
The TPM_CHIP_FLAG_FIRMWARE_UPGRADE_MODE flag is used later during driver
initialization/deinitialization to disable functionality which makes no
sense or will fail in the current TPM state. Following functionality is
affected:
* Do not register TPM as a hwrng
* Do not register sysfs entries which provide information impossible to
obtain in limited mode
* Do not register resource managed character device
Signed-off-by: axelj <axelj@axis.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Set TPM_FIRMWARE_POWER_MANAGED flag based on 'firmware-power-managed'
ACPI DSD property. For the CR50 TPM, this flag defaults to true when
the property is unset.
When this flag is set to false, the CR50 TPM driver will always send
a shutdown command whenever the system suspends.
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Commit 79ca6f74da ("tpm: fix Atmel TPM crash caused by too frequent
queries") has moved some code around without updating the error handling
path.
This is now pointless to 'goto out_err' when neither 'clk_enable()' nor
'ioremap()' have been called yet.
Make a direct return instead to avoid undoing things that have not been
done.
Fixes: 79ca6f74da ("tpm: fix Atmel TPM crash caused by too frequent queries")
Signed-off-by: Christophe Jaillet <christophe.jaillet@wanadoo.fr>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
To allow this device to fill the kernel's entropy pool at boot,
setup a default quality for the hwrng found in Cr50.
After some testing with rngtest and dieharder it was, in short,
discovered that the RNG produces fair quality randomness, giving
around 99.93% successes in rngtest FIPS140-2.
Notably, though, when testing with dieharder it was noticed that
we get 3 WEAK results over 114, which isn't optimal, and also
the p-values distribution wasn't uniform in all the cases, so a
conservative quality value was chosen by applying an arbitrary
penalty to the calculated values.
For reference, this is how the values were calculated:
The dieharder results were averaged, then normalized (0-1000)
and re-averaged with the rngtest result (where the result was
given a score of 99.93% of 1000, so 999.3), then aggregated
together and averaged again.
An arbitrary penalty of -100 was applied due to the retrieved
value, which brings us finally to 700.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Remove parameter descriptions from all static functions.
Remove the comment altogether that does not tell what the function does.
Suggested-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sohaib Mohamed <sohaib.amhmd@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Locality is not appropriately requested before writing the int mask.
Add the missing boilerplate.
Fixes: e6aef069b6 ("tpm_tis: convert to using locality callbacks")
Signed-off-by: Chen Jun <chenjun102@huawei.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
In commit c46ed2281b ("tpm_tis_spi: add missing SPI device ID entries")
we added SPI IDs for all the DT aliases to handle the fact that we always
use SPI modaliases to load modules even when probed via DT however the
mentioned commit missed that the SPI and OF device ID entries did not
match and were different and so DT nodes with compatible
"tcg,tpm_tis-spi" will not match. Add an extra ID for tpm_tis-spi
rather than just fix the existing one since what's currently there is
going to be better for anyone actually using SPI IDs to instantiate.
Fixes: c46ed2281b ("tpm_tis_spi: add missing SPI device ID entries")
Fixes: 96c8395e21 ("spi: Revert modalias changes")
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The Atmel TPM 1.2 chips crash with error
`tpm_try_transmit: send(): error -62` since kernel 4.14.
It is observed from the kernel log after running `tpm_sealdata -z`.
The error thrown from the command is as follows
```
$ tpm_sealdata -z
Tspi_Key_LoadKey failed: 0x00001087 - layer=tddl,
code=0087 (135), I/O error
```
The issue was reproduced with the following Atmel TPM chip:
```
$ tpm_version
T0 TPM 1.2 Version Info:
Chip Version: 1.2.66.1
Spec Level: 2
Errata Revision: 3
TPM Vendor ID: ATML
TPM Version: 01010000
Manufacturer Info: 41544d4c
```
The root cause of the issue is due to the TPM calls to msleep()
were replaced with usleep_range() [1], which reduces
the actual timeout. Via experiments, it is observed that
the original msleep(5) actually sleeps for 15ms.
Because of a known timeout issue in Atmel TPM 1.2 chip,
the shorter timeout than 15ms can cause the error described above.
A few further changes in kernel 4.16 [2] and 4.18 [3, 4] further
reduced the timeout to less than 1ms. With experiments,
the problematic timeout in the latest kernel is the one
for `wait_for_tpm_stat`.
To fix it, the patch reverts the timeout of `wait_for_tpm_stat`
to 15ms for all Atmel TPM 1.2 chips, but leave it untouched
for Ateml TPM 2.0 chip, and chips from other vendors.
As explained above, the chosen 15ms timeout is
the actual timeout before this issue introduced,
thus the old value is used here.
Particularly, TPM_ATML_TIMEOUT_WAIT_STAT_MIN is set to 14700us,
TPM_ATML_TIMEOUT_WAIT_STAT_MIN is set to 15000us according to
the existing TPM_TIMEOUT_RANGE_US (300us).
The fixed has been tested in the system with the affected Atmel chip
with no issues observed after boot up.
References:
[1] 9f3fc7bcdd tpm: replace msleep() with usleep_range() in TPM
1.2/2.0 generic drivers
[2] cf151a9a44 tpm: reduce tpm polling delay in tpm_tis_core
[3] 59f5a6b07f tpm: reduce poll sleep time in tpm_transmit()
[4] 424eaf910c tpm: reduce polling time to usecs for even finer
granularity
Fixes: 9f3fc7bcdd ("tpm: replace msleep() with usleep_range() in TPM 1.2/2.0 generic drivers")
Link: https://patchwork.kernel.org/project/linux-integrity/patch/20200926223150.109645-1-hao.wu@rubrik.com/
Signed-off-by: Hao Wu <hao.wu@rubrik.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The "4 * be32_to_cpu(data->count)" multiplication can potentially
overflow which would lead to memory corruption. Add a check for that.
Cc: stable@vger.kernel.org
Fixes: 745b361e98 ("tpm: infrastructure for TPM spaces")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
COMPILE_TEST is helpful to find compilation errors in other platform(e.g.X86).
In this case, the support of COMPILE_TEST is added, so this module could
be compiled in other platform(e.g.X86), without ARCH_SYNQUACER configuration.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
When rngd is run as root then lots of these types of message will appear
in the kernel log if the TPM has been configured to provide random bytes:
[ 7406.275163] tpm tpm0: tpm_transmit: tpm_recv: error -4
The issue is caused by the following call that is interrupted while
waiting for the TPM's response.
sig = wait_event_interruptible(ibmvtpm->wq, !ibmvtpm->tpm_processing_cmd);
Rather than waiting for the response in the low level driver, have it use
the polling loop in tpm_try_transmit() that uses a command's duration to
poll until a result has been returned by the TPM, thus ending when the
timeout has occurred but not responding to signals and ctrl-c anymore. To
stay in this polling loop extend tpm_ibmvtpm_status() to return
'true' for as long as the vTPM is indicated as being busy in
tpm_processing_cmd. Since the loop requires the TPM's timeouts, get them
now using tpm_get_timeouts() after setting the TPM2 version flag on the
chip.
To recreat the resolved issue start rngd like this:
sudo rngd -r /dev/hwrng -t
sudo rngd -r /dev/tpm0 -t
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1981473
Fixes: 6674ff145e ("tpm_ibmvtpm: properly handle interrupted packet receptions")
Cc: Nayna Jain <nayna@linux.ibm.com>
Cc: George Wilson <gcwilson@linux.ibm.com>
Reported-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Way back when this driver was written the I2C framework
used to insist an ID table be defined even if the driver
did not use it in favor of ACPI/OF matching, so it was
added just to placate the hard I2C framework requirement.
This is no longer the case so we can drop the table and
also convert the driver to the new probe interface.
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
This fixes a minor bug which went unnoticed during the initial
driver upstreaming review: TCG_CR50 does not exist in mainline
kernels, so remove it.
Fixes: 3a253caaad ("char: tpm: add i2c driver for cr50")
Cc: stable@vger.kernel.org
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
dma-buf backed shared memory cannot be reliably freed and unregistered
during a kexec operation even when tee_shm_free() is called on the shm
from a .shutdown hook. The problem occurs because dma_buf_put() calls
fput() which then uses task_work_add(), with the TWA_RESUME parameter,
to queue tee_shm_release() to be called before the current task returns
to user mode. However, the current task never returns to user mode
before the kexec completes so the memory is never freed nor
unregistered.
Use tee_shm_alloc_kernel_buf() to avoid dma-buf backed shared memory
allocation so that tee_shm_free() can directly call tee_shm_release().
This will ensure that the shm can be freed and unregistered during a
kexec operation.
Fixes: 09e574831b ("tpm/tpm_ftpm_tee: A driver for firmware TPM running inside TEE")
Fixes: 1760eb689e ("tpm/tpm_ftpm_tee: add shutdown call back")
Cc: stable@vger.kernel.org
Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Do not tear down the system when getting invalid status from a TPM chip.
This can happen when panic-on-warn is used.
Instead, introduce TPM_TIS_INVALID_STATUS bitflag and use it to trigger
once the error reporting per chip. In addition, print out the value of
TPM_STS for improved forensics.
Link: https://lore.kernel.org/keyrings/YKzlTR1AzUigShtZ@kroah.com/
Fixes: 55707d531a ("tpm_tis: Add a check for invalid status")
Cc: stable@vger.kernel.org
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use DEFINE_RES_MEM() to save a couple of lines of code, which is simpler
and more readable. The start address does not need to appear twice.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Fix the following make W=1 warnings:
drivers/char/tpm/tpm1-cmd.c:325: warning: expecting prototype for tpm_startup(). Prototype was for tpm1_startup() instead
drivers/char/tpm/tpm1-cmd.c:621: warning: expecting prototype for tpm_continue_selftest(). Prototype was for tpm1_continue_selftest() instead
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The SPI core always reports a "MODALIAS=spi:<foo>", even if the device was
registered via OF. This means that this module won't auto-load if a DT has
for example has a node with a compatible "infineon,slb9670" string.
In that case kmod will expect a "MODALIAS=of:N*T*Cinfineon,slb9670" uevent
but instead will get a "MODALIAS=spi:slb9670", which is not present in the
kernel module aliases:
$ modinfo drivers/char/tpm/tpm_tis_spi.ko | grep alias
alias: of:N*T*Cgoogle,cr50C*
alias: of:N*T*Cgoogle,cr50
alias: of:N*T*Ctcg,tpm_tis-spiC*
alias: of:N*T*Ctcg,tpm_tis-spi
alias: of:N*T*Cinfineon,slb9670C*
alias: of:N*T*Cinfineon,slb9670
alias: of:N*T*Cst,st33htpm-spiC*
alias: of:N*T*Cst,st33htpm-spi
alias: spi:cr50
alias: spi:tpm_tis_spi
alias: acpi*:SMO0768:*
To workaround this issue, add in the SPI device ID table all the entries
that are present in the OF device ID table.
Reported-by: Alexander Wellbrock <a.wellbrock@mailbox.org>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
While running a TPM2_CC_VERIFY_SIGNATURE operation with RSA 3072-bit
keys the TPM driver fails with the following error:
"kernel: [ 2416.187522] tpm tpm0: Operation Timed out"
Since the TPM PC Client specification does not specify a number for
verify signature operation timeout, and the duration of
TPM2_CC_VERIFY_SIGNATURE with RSA 3072-bit keys exceeds the current timeout
of TPM_LONG (2 seconds), it is preferable to pick the longest timeout
possible.
Therefore, set the duration for TPM2_CC_VERIFY_SIGNATUE to TPM_LONG_LONG
(5 minutes).
[jarkko@kernel.org: mangled the short summary a bit]
Link: https://trustedcomputinggroup.org/resource/pc-client-specific-platform-firmware-profile-specification/
Signed-off-by: Amir Mizinski <amirmizi6@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
disable_irq() after request_irq() still has a time gap in which
interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will
disable IRQ auto-enable because of requesting.
Link: https://lore.kernel.org/patchwork/patch/1388765/
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
In DSDT table, TPM _CID was SMO0768, and no _HID definition. After a
kernel upgrade from 4.19 to 5.10, TPM probe function was changed which
causes device probe fails. In order to make newer kernel to be
compatible with the older acpi definition, it would be best set default
probe function.
Signed-off-by: Liguang Zhang <zhangliguang@linux.alibaba.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
This is to simplify the code, and IOMEM_ERR_PTR(err) is same with
(__force void __iomem *)ERR_PTR(err).
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
If the total number of commands queried through TPM2_CAP_COMMANDS is
different from that queried through TPM2_CC_GET_CAPABILITY, it indicates
an unknown error. In this case, an appropriate error code -EFAULT should
be returned. However, we currently do not explicitly assign this error
code to 'rc'. As a result, 0 was incorrectly returned.
Cc: stable@vger.kernel.org
Fixes: 58472f5cd4f6("tpm: validate TPM 2.0 commands")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Reserve locality in tpm_tis_resume(), as it could be unsert after waking
up from a sleep state.
Cc: stable@vger.kernel.org
Cc: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Reported-by: Hans de Goede <hdegoede@redhat.com>
Fixes: a3fbfae82b ("tpm: take TPM chip power gating out of tpm_transmit()")
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The earlier fix (linked) only partially fixed the locality handling bug
in tpm_tis_gen_interrupt(), i.e. only for TPM 1.x.
Extend the locality handling to cover TPM2.
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-integrity/20210220125534.20707-1-jarkko@kernel.org/
Fixes: a3fbfae82b ("tpm: take TPM chip power gating out of tpm_transmit()")
Reported-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Fixes: 3a253caaad ("char: tpm: add i2c driver for cr50")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Avoid allocating memory and reading the host log when a virtual device
is used since this log is of no use to that driver. A virtual
device can be identified through the flag TPM_CHIP_FLAG_VIRTUAL, which
is only set for the tpm_vtpm_proxy driver.
Cc: stable@vger.kernel.org
Fixes: 6f99612e25 ("tpm: Proxy driver for supporting multiple emulated TPMs")
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Check the eventlog signature before using it. This avoids using an
empty log, as may be the case when QEMU created the ACPI tables,
rather than probing the EFI log next. This resolves an issue where
the EFI log was empty since an empty ACPI log was used.
Cc: stable@vger.kernel.org
Fixes: 85467f63a0 ("tpm: Add support for event log pointer found in TPM2 ACPI table")
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
When tpm_read_log_efi is called multiple times, which happens when
one loads and unloads a TPM2 driver multiple times, then the global
variable efi_tpm_final_log_size will at some point become a negative
number due to the subtraction of final_events_preboot_size occurring
each time. Use a local variable to avoid this integer underflow.
The following issue is now resolved:
Mar 8 15:35:12 hibinst kernel: Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
Mar 8 15:35:12 hibinst kernel: Workqueue: tpm-vtpm vtpm_proxy_work [tpm_vtpm_proxy]
Mar 8 15:35:12 hibinst kernel: RIP: 0010:__memcpy+0x12/0x20
Mar 8 15:35:12 hibinst kernel: Code: 00 b8 01 00 00 00 85 d2 74 0a c7 05 44 7b ef 00 0f 00 00 00 c3 cc cc cc 66 66 90 66 90 48 89 f8 48 89 d1 48 c1 e9 03 83 e2 07 <f3> 48 a5 89 d1 f3 a4 c3 66 0f 1f 44 00 00 48 89 f8 48 89 d1 f3 a4
Mar 8 15:35:12 hibinst kernel: RSP: 0018:ffff9ac4c0fcfde0 EFLAGS: 00010206
Mar 8 15:35:12 hibinst kernel: RAX: ffff88f878cefed5 RBX: ffff88f878ce9000 RCX: 1ffffffffffffe0f
Mar 8 15:35:12 hibinst kernel: RDX: 0000000000000003 RSI: ffff9ac4c003bff9 RDI: ffff88f878cf0e4d
Mar 8 15:35:12 hibinst kernel: RBP: ffff9ac4c003b000 R08: 0000000000001000 R09: 000000007e9d6073
Mar 8 15:35:12 hibinst kernel: R10: ffff9ac4c003b000 R11: ffff88f879ad3500 R12: 0000000000000ed5
Mar 8 15:35:12 hibinst kernel: R13: ffff88f878ce9760 R14: 0000000000000002 R15: ffff88f77de7f018
Mar 8 15:35:12 hibinst kernel: FS: 0000000000000000(0000) GS:ffff88f87bd00000(0000) knlGS:0000000000000000
Mar 8 15:35:12 hibinst kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
Mar 8 15:35:12 hibinst kernel: CR2: ffff9ac4c003c000 CR3: 00000001785a6004 CR4: 0000000000060ee0
Mar 8 15:35:12 hibinst kernel: Call Trace:
Mar 8 15:35:12 hibinst kernel: tpm_read_log_efi+0x152/0x1a7
Mar 8 15:35:12 hibinst kernel: tpm_bios_log_setup+0xc8/0x1c0
Mar 8 15:35:12 hibinst kernel: tpm_chip_register+0x8f/0x260
Mar 8 15:35:12 hibinst kernel: vtpm_proxy_work+0x16/0x60 [tpm_vtpm_proxy]
Mar 8 15:35:12 hibinst kernel: process_one_work+0x1b4/0x370
Mar 8 15:35:12 hibinst kernel: worker_thread+0x53/0x3e0
Mar 8 15:35:12 hibinst kernel: ? process_one_work+0x370/0x370
Cc: stable@vger.kernel.org
Fixes: 166a2809d6 ("tpm: Don't duplicate events from the final event log in the TCG2 log")
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
One non-fix, the conversion of vio_driver->remove() to return void, which
touches various powerpc specific drivers.
Fix the privilege checks we do in our perf handling, which could cause soft/hard
lockups in some configurations.
Fix a bug with IRQ affinity seen on kdump kernels when CPU 0 is offline in the
second kernel.
Fix missed page faults after mprotect(..., PROT_NONE) on 603 (32-bit).
Fix a bug in our VSX (vector) instruction emulation, which should only be seen
when doing VSX ops to cache inhibited mappings.
Three commits fixing various build issues with obscure configurations.
Thanks to:
Athira Rajeev, Cédric Le Goater, Christophe Leroy, Christoph Plattner, Greg
Kurz, Jordan Niethe, Laurent Vivier, Ravi Bangoria, Tyrel Datwyler, Uwe
Kleine-König.
-----BEGIN PGP SIGNATURE-----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=Jpjh
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"One non-fix, the conversion of vio_driver->remove() to return void,
which touches various powerpc specific drivers.
Fix the privilege checks we do in our perf handling, which could cause
soft/hard lockups in some configurations.
Fix a bug with IRQ affinity seen on kdump kernels when CPU 0 is
offline in the second kernel.
Fix missed page faults after mprotect(..., PROT_NONE) on 603 (32-bit).
Fix a bug in our VSX (vector) instruction emulation, which should only
be seen when doing VSX ops to cache inhibited mappings.
Three commits fixing various build issues with obscure configurations.
Thanks to Athira Rajeev, Cédric Le Goater, Christophe Leroy, Christoph
Plattner, Greg Kurz, Jordan Niethe, Laurent Vivier, Ravi Bangoria,
Tyrel Datwyler, and Uwe Kleine-König"
* tag 'powerpc-5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/sstep: Fix VSX instruction emulation
powerpc/perf: Fix handling of privilege level checks in perf interrupt context
powerpc: Force inlining of mmu_has_feature to fix build failure
vio: make remove callback return void
powerpc/syscall: Force inlining of __prep_irq_for_enabled_exit()
powerpc/603: Fix protection of user pages mapped with PROT_NONE
powerpc/pseries: Don't enforce MSI affinity with kdump
powerpc/4xx: Fix build errors from mfdcr()
Somewhere along the line, probably during a rebase, an unintentional
dump_stack() got included. Revert this change.
Reported-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Fixes: 90cba8d20f ("tpm/ppi: Constify static struct attribute_group")
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The driver core ignores the return value of struct bus_type::remove()
because there is only little that can be done. To simplify the quest to
make this function return void, let struct vio_driver::remove() return
void, too. All users already unconditionally return 0, this commit makes
it obvious that returning an error code is a bad idea.
Note there are two nominally different implementations for a vio bus:
one in arch/sparc/kernel/vio.c and the other in
arch/powerpc/platforms/pseries/vio.c. This patch only adapts the powerpc
one.
Before this patch for a device that was bound to a driver without a
remove callback vio_cmo_bus_remove(viodev) wasn't called. As the device
core still considers the device unbound after vio_bus_remove() returns
calling this unconditionally is the consistent behaviour which is
implemented here.
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Acked-by: Lijun Pan <ljp@linux.ibm.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[mpe: Drop unneeded hvcs_remove() forward declaration, squash in
change from sfr to drop ibmvnic_remove() forward declaration]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210225221834.160083-1-uwe@kleine-koenig.org
This is shown with Samsung Chromebook Pro (Caroline) with TPM 1.2
(SLB 9670):
[ 4.324298] TPM returned invalid status
[ 4.324806] WARNING: CPU: 2 PID: 1 at drivers/char/tpm/tpm_tis_core.c:275 tpm_tis_status+0x86/0x8f
Background
==========
TCG PC Client Platform TPM Profile (PTP) Specification, paragraph 6.1 FIFO
Interface Locality Usage per Register, Table 39 Register Behavior Based on
Locality Setting for FIFO - a read attempt to TPM_STS_x Registers returns
0xFF in case of lack of locality.
The fix
=======
Decorate tpm_tis_gen_interrupt() with request_locality() and
release_locality().
Cc: Laurent Bigonville <bigon@debian.org>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: stable@vger.kernel.org
Fixes: a3fbfae82b ("tpm: take TPM chip power gating out of tpm_transmit()")
Signed-off-by: Lukasz Majczak <lma@semihalf.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
This is shown with Samsung Chromebook Pro (Caroline) with TPM 1.2
(SLB 9670):
[ 4.324298] TPM returned invalid status
[ 4.324806] WARNING: CPU: 2 PID: 1 at drivers/char/tpm/tpm_tis_core.c:275 tpm_tis_status+0x86/0x8f
Background
==========
TCG PC Client Platform TPM Profile (PTP) Specification, paragraph 6.1 FIFO
Interface Locality Usage per Register, Table 39 Register Behavior Based on
Locality Setting for FIFO - a read attempt to TPM_STS_x Registers returns
0xFF in case of lack of locality.
The fix
=======
Decorate tpm_get_timeouts() with request_locality() and release_locality().
Fixes: a3fbfae82b ("tpm: take TPM chip power gating out of tpm_transmit()")
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Laurent Bigonville <bigon@debian.org>
Cc: stable@vger.kernel.org
Reported-by: Lukasz Majczak <lma@semihalf.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
When TPM 2.0 trusted keys code was moved to the trusted keys subsystem,
the operations were unwrapped from tpm_try_get_ops() and tpm_put_ops(),
which are used to take temporarily the ownership of the TPM chip. The
ownership is only taken inside tpm_send(), but this is not sufficient,
as in the key load TPM2_CC_LOAD, TPM2_CC_UNSEAL and TPM2_FLUSH_CONTEXT
need to be done as a one single atom.
Take the TPM chip ownership before sending anything with
tpm_try_get_ops() and tpm_put_ops(), and use tpm_transmit_cmd() to send
TPM commands instead of tpm_send(), reverting back to the old behaviour.
Fixes: 2e19e10131 ("KEYS: trusted: Move TPM2 trusted keys code")
Reported-by: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: stable@vger.kernel.org
Cc: David Howells <dhowells@redhat.com>
Cc: Mimi Zohar <zohar@linux.ibm.com>
Cc: Sumit Garg <sumit.garg@linaro.org>
Acked-by Sumit Garg <sumit.garg@linaro.org>
Tested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The only usage of ppi_attr_grp is to put its address in an array of
pointers to const struct attribute_group. Make it const to allow the
compiler to put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Create sysfs per hash groups with 24 PCR files in them one group,
named pcr-<hash>, for each agile hash of the TPM. The files are
plugged in to a PCR read function which is TPM version agnostic, so
this works also for TPM 1.2 but the hash is only sha1 in that case.
Note: the macros used to create the hashes emit spurious checkpatch
warnings. Do not try to "fix" them as checkpatch recommends, otherwise
they'll break.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Tested-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Never used since it was added.
Fixes: 9e1b74a63f ("tpm: add support for nonblocking operation")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-integrity@vger.kernel.org
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Philip Tricca <philip.b.tricca@intel.com>
Cc: Tadeusz Struk <tadeusz.struk@intel.com>
Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Add TPM 2.0 compatible I2C interface for chips with cr50 firmware.
The firmware running on the currently supported H1 MCU requires a
special driver to handle its specific protocol, and this makes it
unsuitable to use tpm_tis_core_* and instead it must implement the
underlying TPM protocol similar to the other I2C TPM drivers.
- All 4 bytes of status register must be read/written at once.
- FIFO and burst count is limited to 63 and must be drained by AP.
- Provides an interrupt to indicate when read response data is ready
and when the TPM is finished processing write data.
This driver is based on the existing infineon I2C TPM driver, which
most closely matches the cr50 i2c protocol behavior.
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Tested-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning
by explicitly adding a break statement instead of letting the code fall
through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The current release locality code seems to be based on the
misunderstanding that the TPM interrupts when a locality is released:
it doesn't, only when the locality is acquired.
Furthermore, there seems to be no point in waiting for the locality to
be released. All it does is penalize the last TPM user. However, if
there's no next TPM user, this is a pointless wait and if there is a
next TPM user, they'll pay the penalty waiting for the new locality
(or possibly not if it's the same as the old locality).
Fix the code by making release_locality as simple write to release
with no waiting for completion.
Cc: stable@ger.kernel.org
Fixes: 33bafe9082 ("tpm_tis: verify locality released before returning from release_locality")
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The TPM TIS specification says the TPM signals the acquisition of locality
when the TMP_ACCESS_REQUEST_USE bit goes to one *and* the
TPM_ACCESS_REQUEST_USE bit goes to zero. Currently we only check the
former not the latter, so check both. Adding the check on
TPM_ACCESS_REQUEST_USE should fix the case where the locality is
re-requested before the TPM has released it. In this case the locality may
get released briefly before it is reacquired, which causes all sorts of
problems. However, with the added check, TPM_ACCESS_REQUEST_USE should
remain 1 until the second request for the locality is granted.
Cc: stable@ger.kernel.org
Fixes: 27084efee0 ("[PATCH] tpm: driver for next generation TPM chips")
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Mimic the pre-existing ACPI and Device Tree event log behavior by not
creating the binary_bios_measurements file when the EFI TPM event log is
empty.
This fixes the following NULL pointer dereference that can occur when
reading /sys/kernel/security/tpm0/binary_bios_measurements after the
kernel received an empty event log from the firmware:
BUG: kernel NULL pointer dereference, address: 000000000000002c
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 2 PID: 3932 Comm: fwupdtpmevlog Not tainted 5.9.0-00003-g629990edad62 #17
Hardware name: LENOVO 20LCS03L00/20LCS03L00, BIOS N27ET38W (1.24 ) 11/28/2019
RIP: 0010:tpm2_bios_measurements_start+0x3a/0x550
Code: 54 53 48 83 ec 68 48 8b 57 70 48 8b 1e 65 48 8b 04 25 28 00 00 00 48 89 45 d0 31 c0 48 8b 82 c0 06 00 00 48 8b 8a c8 06 00 00 <44> 8b 60 1c 48 89 4d a0 4c 89 e2 49 83 c4 20 48 83 fb 00 75 2a 49
RSP: 0018:ffffa9c901203db0 EFLAGS: 00010246
RAX: 0000000000000010 RBX: 0000000000000000 RCX: 0000000000000010
RDX: ffff8ba1eb99c000 RSI: ffff8ba1e4ce8280 RDI: ffff8ba1e4ce8258
RBP: ffffa9c901203e40 R08: ffffa9c901203dd8 R09: ffff8ba1ec443300
R10: ffffa9c901203e50 R11: 0000000000000000 R12: ffff8ba1e4ce8280
R13: ffffa9c901203ef0 R14: ffffa9c901203ef0 R15: ffff8ba1e4ce8258
FS: 00007f6595460880(0000) GS:ffff8ba1ef880000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000000002c CR3: 00000007d8d18003 CR4: 00000000003706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
? __kmalloc_node+0x113/0x320
? kvmalloc_node+0x31/0x80
seq_read+0x94/0x420
vfs_read+0xa7/0x190
ksys_read+0xa7/0xe0
__x64_sys_read+0x1a/0x20
do_syscall_64+0x37/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xa9
In this situation, the bios_event_log pointer in the tpm_bios_log struct
was not NULL but was equal to the ZERO_SIZE_PTR (0x10) value. This was
due to the following kmemdup() in tpm_read_log_efi():
int tpm_read_log_efi(struct tpm_chip *chip)
{
...
/* malloc EventLog space */
log->bios_event_log = kmemdup(log_tbl->log, log_size, GFP_KERNEL);
if (!log->bios_event_log) {
ret = -ENOMEM;
goto out;
}
...
}
When log_size is zero, due to an empty event log from firmware,
ZERO_SIZE_PTR is returned from kmemdup(). Upon a read of the
binary_bios_measurements file, the tpm2_bios_measurements_start()
function does not perform a ZERO_OR_NULL_PTR() check on the
bios_event_log pointer before dereferencing it.
Rather than add a ZERO_OR_NULL_PTR() check in functions that make use of
the bios_event_log pointer, simply avoid creating the
binary_bios_measurements_file as is done in other event log retrieval
backends.
Explicitly ignore all of the events in the final event log when the main
event log is empty. The list of events in the final event log cannot be
accurately parsed without referring to the first event in the main event
log (the event log header) so the final event log is useless in such a
situation.
Fixes: 58cc1e4faf ("tpm: parse TPM event logs based on EFI table")
Link: https://lore.kernel.org/linux-integrity/E1FDCCCB-CA51-4AEE-AC83-9CDE995EAE52@canonical.com/
Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reported-by: Kenneth R. Crudup <kenny@panix.com>
Reported-by: Mimi Zohar <zohar@linux.ibm.com>
Cc: Thiébaud Weksteen <tweek@google.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
There is a misconfiguration in the bios of the gpio pin used for the
interrupt in the T490s. When interrupts are enabled in the tpm_tis
driver code this results in an interrupt storm. This was initially
reported when we attempted to enable the interrupt code in the tpm_tis
driver, which previously wasn't setting a flag to enable it. Due to
the reports of the interrupt storm that code was reverted and we went back
to polling instead of using interrupts. Now that we know the T490s problem
is a firmware issue, add code to check if the system is a T490s and
disable interrupts if that is the case. This will allow us to enable
interrupts for everyone else. If the user has a fixed bios they can
force the enabling of interrupts with tpm_tis.interrupts=1 on the
kernel command line.
Cc: Peter Huewe <peterhuewe@gmx.de>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Some TIS based TPMs can return 0xff to status reads if the locality
hasn't been properly requested. Detect this condition by checking the
bits that the TIS spec specifies must return zero are clear and return
zero in that case. Also drop a warning so the problem can be
identified in the calling path and fixed (usually a missing
try_get_ops()).
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Use %*ph format to print small buffer as hex string.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
When fitted, the SynQuacer platform exposes its SPI TPM via a MMIO
window that is backed by the SPI command sequencer in the SPI bus
controller. This arrangement has the limitation that only byte size
accesses are supported, and so we'll need to provide a separate module
that take this into account.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
A couple of subsystems have their own subsystem maintainers but choose
to have the code merged through the soc tree as upstream, as the code
tends to be used across multiple SoCs or has SoC specific drivers itself:
- memory controllers:
Krzysztof Kozlowski takes ownership of the drivers/memory
subsystem and its drivers, starting out with a set of cleanup
patches.
A larger driver for the Tegra memory controller that was accidentally
missed for v5.8 is now added.
- reset controllers:
Only minor updates to drivers/reset this time
- firmware:
The "turris mox" firmware driver gains support for signed firmware blobs
The tegra firmware driver gets extended to export some debug information
Various updates to i.MX firmware drivers, mostly cosmetic
- ARM SCMI/SCPI:
A new mechanism for platform notifications is added, among a number
of minor changes.
- optee:
Probing of the TEE bus is rewritten to better support detection of
devices that depend on the tee-supplicant user space.
A new firmware based trusted platform module (fTPM) driver is added
based on OP-TEE
- SoC attributes:
A new driver is added to provide a generic soc_device for identifying
a machine through the SMCCC ARCH_SOC_ID firmware interface rather than
by probing SoC family specific registers.
The series also contains some cleanups to the common soc_device code.
There are also a number of updates to SoC specific drivers,
the main ones are:
- Mediatek cmdq driver gains a few in-kernel interfaces
- Minor updates to Qualcomm RPMh, socinfo, rpm drivers, mostly adding
support for additional SoC variants
- The Qualcomm GENI core code gains interconnect path voting and
performance level support, and integrating this into a number of
device drivers.
- A new driver for Samsung Exynos5800 voltage coupler for
- Renesas RZ/G2H (R8A774E1) SoC support gets added to a couple of SoC
specific device drivers
- Updates to the TI K3 Ring Accelerator driver
-----BEGIN PGP SIGNATURE-----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=nezz
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"A couple of subsystems have their own subsystem maintainers but choose
to have the code merged through the soc tree as upstream, as the code
tends to be used across multiple SoCs or has SoC specific drivers
itself:
- memory controllers:
Krzysztof Kozlowski takes ownership of the drivers/memory subsystem
and its drivers, starting out with a set of cleanup patches.
A larger driver for the Tegra memory controller that was
accidentally missed for v5.8 is now added.
- reset controllers:
Only minor updates to drivers/reset this time
- firmware:
The "turris mox" firmware driver gains support for signed firmware
blobs The tegra firmware driver gets extended to export some debug
information Various updates to i.MX firmware drivers, mostly
cosmetic
- ARM SCMI/SCPI:
A new mechanism for platform notifications is added, among a number
of minor changes.
- optee:
Probing of the TEE bus is rewritten to better support detection of
devices that depend on the tee-supplicant user space. A new
firmware based trusted platform module (fTPM) driver is added based
on OP-TEE
- SoC attributes:
A new driver is added to provide a generic soc_device for
identifying a machine through the SMCCC ARCH_SOC_ID firmware
interface rather than by probing SoC family specific registers.
The series also contains some cleanups to the common soc_device
code.
There are also a number of updates to SoC specific drivers, the main
ones are:
- Mediatek cmdq driver gains a few in-kernel interfaces
- Minor updates to Qualcomm RPMh, socinfo, rpm drivers, mostly adding
support for additional SoC variants
- The Qualcomm GENI core code gains interconnect path voting and
performance level support, and integrating this into a number of
device drivers.
- A new driver for Samsung Exynos5800 voltage coupler for
- Renesas RZ/G2H (R8A774E1) SoC support gets added to a couple of SoC
specific device drivers
- Updates to the TI K3 Ring Accelerator driver"
* tag 'arm-drivers-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (164 commits)
soc: qcom: geni: Fix unused label warning
soc: qcom: smd-rpm: Fix kerneldoc
memory: jz4780_nemc: Only request IO memory the driver will use
soc: qcom: pdr: Reorder the PD state indication ack
MAINTAINERS: Add Git repository for memory controller drivers
memory: brcmstb_dpfe: Fix language typo
memory: samsung: exynos5422-dmc: Correct white space issues
memory: samsung: exynos-srom: Correct alignment
memory: pl172: Enclose macro argument usage in parenthesis
memory: of: Correct kerneldoc
memory: omap-gpmc: Fix language typo
memory: omap-gpmc: Correct white space issues
memory: omap-gpmc: Use 'unsigned int' for consistency
memory: omap-gpmc: Enclose macro argument usage in parenthesis
memory: omap-gpmc: Correct kerneldoc
memory: mvebu-devbus: Align with open parenthesis
memory: mvebu-devbus: Add missing braces to all arms of if statement
memory: bt1-l2-ctl: Add blank lines after declarations
soc: TI knav_qmss: make symbol 'knav_acc_range_ops' static
firmware: ti_sci: Replace HTTP links with HTTPS ones
...
In case a TPM2 is attached, search for a TPM2 ACPI table when trying
to get the event log from ACPI. If one is found, use it to get the
start and length of the log area. This allows non-UEFI systems, such
as SeaBIOS, to pass an event log when using a TPM2.
Cc: Peter Huewe <peterhuewe@gmx.de>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
The size of the buffers for storing context's and sessions can vary from
arch to arch as PAGE_SIZE can be anything between 4 kB and 256 kB (the
maximum for PPC64). Define a fixed buffer size set to 16 kB. This should be
enough for most use with three handles (that is how many we allow at the
moment). Parametrize the buffer size while doing this, so that it is easier
to revisit this later on if required.
Cc: stable@vger.kernel.org
Reported-by: Stefan Berger <stefanb@linux.ibm.com>
Fixes: 745b361e98 ("tpm: infrastructure for TPM spaces")
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Probes drivers on the OP-TEE bus in two steps. First for drivers which
do not depend on tee-supplicant. After tee-supplicant has been started
probe the devices which do depend on tee-supplicant.
Also introduces driver which uses an OP-TEE based fTPM Trusted
Application depends on tee-supplicant NV RAM implementation based on
RPMB secure storage.
-----BEGIN PGP SIGNATURE-----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=PDtV
-----END PGP SIGNATURE-----
Merge tag 'optee-bus-for-v5.9' of git://git.linaro.org/people/jens.wiklander/linux-tee into arm/drivers
Enable multi-stage OP-TEE bus enumeration
Probes drivers on the OP-TEE bus in two steps. First for drivers which
do not depend on tee-supplicant. After tee-supplicant has been started
probe the devices which do depend on tee-supplicant.
Also introduces driver which uses an OP-TEE based fTPM Trusted
Application depends on tee-supplicant NV RAM implementation based on
RPMB secure storage.
* tag 'optee-bus-for-v5.9' of git://git.linaro.org/people/jens.wiklander/linux-tee:
tpm_ftpm_tee: register driver on TEE bus
optee: enable support for multi-stage bus enumeration
optee: use uuid for sysfs driver entry
Link: https://lore.kernel.org/r/20200710085230.GA1312913@jade
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
OP-TEE based fTPM Trusted Application depends on tee-supplicant to
provide NV RAM implementation based on RPMB secure storage. So this
dependency can be resolved via TEE bus where we only invoke fTPM
driver probe once fTPM device is registered on the bus which is only
true after the tee-supplicant is up and running. Additionally, TEE bus
provides auto device enumeration.
Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org>
Suggested-by: Sumit Garg <sumit.garg@linaro.org>
Suggested-by: Arnd Bergmann <arnd@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Removing IFX0102 from tpm_tis was not a right move because both tpm_tis
and tpm_infineon use the same device ID. Revert the commit and add a
remark about a bug caused by commit 93e1b7d42e ("[PATCH] tpm: add HID
module parameter").
Fixes: e918e57041 ("tpm_tis: Remove the HID IFX0102")
Reported-by: Peter Huewe <peterhuewe@gmx.de>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Acer C720 running Linux v5.3 reports this in klog:
tpm_tis: 1.2 TPM (device-id 0xB, rev-id 16)
tpm tpm0: tpm_try_transmit: send(): error -5
tpm tpm0: A TPM error (-5) occurred attempting to determine the timeouts
tpm_tis tpm_tis: Could not get TPM timeouts and durations
tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16)
tpm tpm0: tpm_try_transmit: send(): error -5
tpm tpm0: A TPM error (-5) occurred attempting to determine the timeouts
tpm_tis 00:08: Could not get TPM timeouts and durations
ima: No TPM chip found, activating TPM-bypass!
tpm_inf_pnp 00:08: Found TPM with ID IFX0102
% git --no-pager grep IFX0102 drivers/char/tpm
drivers/char/tpm/tpm_infineon.c: {"IFX0102", 0},
drivers/char/tpm/tpm_tis.c: {"IFX0102", 0}, /* Infineon */
Obviously IFX0102 was added to the HID table for the TCG TIS driver by
mistake.
Fixes: 93e1b7d42e ("[PATCH] tpm: add HID module parameter")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=203877
Cc: stable@vger.kernel.org
Cc: Kylene Jo Hall <kjhall@us.ibm.com>
Reported-by: Ferry Toth: <ferry.toth@elsinga.info>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
On a Chromebook I'm working on I noticed a big (~1 second) delay
during bootup where nothing was happening. Right around this big
delay there were messages about the TPM:
[ 2.311352] tpm_tis_spi spi0.0: TPM ready IRQ confirmed on attempt 2
[ 3.332790] tpm_tis_spi spi0.0: Cr50 firmware version: ...
I put a few printouts in and saw that tpm_tis_spi_init() (specifically
tpm_chip_register() in that function) was taking the lion's share of
this time, though ~115 ms of the time was in cr50_print_fw_version().
Let's make a one-line change to prefer async probe for tpm_tis_spi.
There's no reason we need to block other drivers from probing while we
load.
NOTES:
* It's possible that other hardware runs through the init sequence
faster than Cr50 and this isn't such a big problem for them.
However, even if they are faster they are still doing _some_
transfers over a SPI bus so this should benefit everyone even if to
a lesser extent.
* It's possible that there are extra delays in the code that could be
optimized out. I didn't dig since once I enabled async probe they
no longer impacted me.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
The tpm2_get_cc_attrs_tbl() call will result in TPM commands being issued,
which will need the use of the internal command/response buffer. But,
we're issuing this *before* we've waited to make sure that buffer is
allocated.
This can result in intermittent failures to probe if the hypervisor / TPM
implementation doesn't respond quickly enough. I find it fails almost
every time with an 8 vcpu guest under KVM with software emulated TPM.
To fix it, just move the tpm2_get_cc_attrs_tlb() call after the
existing code to wait for initialization, which will ensure the buffer
is allocated.
Fixes: 18b3670d79 ("tpm: ibmvtpm: Add support for TPM2")
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Trivial fix, the spelling of "drescription" is incorrect
in function comment.
Fix this.
Signed-off-by: Binbin Zhou <zhoubinbin@uniontech.com>
Acked-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Found by smatch:
drivers/char/tpm/tpm_tis_core.c:1088 tpm_tis_core_init() warn:
variable dereferenced before check 'chip->ops' (see line 979)
'chip->ops' is assigned in the beginning of function
in tpmm_chip_alloc->tpm_chip_alloc
and is used before first possible goto to error path.
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
During flow control we are just reading from the TPM, yet our spi_xfer
has the tx_buf and rx_buf both non-NULL which means we're requesting a
full duplex transfer.
SPI is always somewhat of a full duplex protocol anyway and in theory
the other side shouldn't really be looking at what we're sending it
during flow control, but it's still a bit ugly to be sending some
"random" data when we shouldn't.
The default tpm_tis_spi_flow_control() tries to address this by
setting 'phy->iobuf[0] = 0'. This partially avoids the problem of
sending "random" data, but since our tx_buf and rx_buf both point to
the same place I believe there is the potential of us sending the
TPM's previous byte back to it if we hit the retry loop.
Another flow control implementation, cr50_spi_flow_control(), doesn't
address this at all.
Let's clean this up and just make the tx_buf NULL before we call
flow_control(). Not only does this ensure that we're not sending any
"random" bytes but it also possibly could make the SPI controller
behave in a slightly more optimal way.
NOTE: no actual observed problems are fixed by this patch--it's was
just made based on code inspection.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
It has been reported that some TIS based TPMs are giving unexpected
errors when using the O_NONBLOCK path of the TPM device. The problem
is that some TPMs don't like it when you get and then relinquish a
locality (as the tpm_try_get_ops()/tpm_put_ops() pair does) without
sending a command. This currently happens all the time in the
O_NONBLOCK write path. Fix this by moving the tpm_try_get_ops()
further down the code to after the O_NONBLOCK determination is made.
This is safe because the priv->buffer_mutex still protects the priv
state being modified.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206275
Fixes: d23d124843 ("tpm: fix invalid locking in NONBLOCKING mode")
Reported-by: Mario Limonciello <Mario.Limonciello@dell.com>
Tested-by: Alex Guzman <alex@guzman.io>
Cc: stable@vger.kernel.org
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Since commit 84af7a6194 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.
This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.
There are a variety of indentation styles found.
a) 4 spaces + '---help---'
b) 7 spaces + '---help---'
c) 8 spaces + '---help---'
d) 1 space + 1 tab + '---help---'
e) 1 tab + '---help---' (correct indentation)
f) 1 tab + 1 space + '---help---'
g) 1 tab + 2 spaces + '---help---'
In order to convert all of them to 1 tab + 'help', I ran the
following commend:
$ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.
Also, the following issue shows up due to the flexible-array member
having incomplete type[4]:
drivers/char/tpm/eventlog/tpm2.c: In function ‘tpm2_bios_measurements_start’:
drivers/char/tpm/eventlog/tpm2.c:54:46: error: invalid application of ‘sizeof’ to incomplete type ‘u8[]’ {aka ‘unsigned char[]’}
54 | size = sizeof(struct tcg_pcr_event) - sizeof(event_header->event)
| ^
drivers/char/tpm/eventlog/tpm2.c: In function ‘tpm2_bios_measurements_next’:
drivers/char/tpm/eventlog/tpm2.c:102:10: error: invalid application of ‘sizeof’ to incomplete type ‘u8[]’ {aka ‘unsigned char[]’}
102 | sizeof(event_header->event) + event_header->event_size;
| ^
drivers/char/tpm/eventlog/tpm2.c: In function ‘tpm2_binary_bios_measurements_show’:
drivers/char/tpm/eventlog/tpm2.c:140:10: error: invalid application of ‘sizeof’ to incomplete type ‘u8[]’ {aka ‘unsigned char[]’}
140 | sizeof(event_header->event) + event_header->event_size;
| ^
scripts/Makefile.build:266: recipe for target 'drivers/char/tpm/eventlog/tpm2.o' failed
make[3]: *** [drivers/char/tpm/eventlog/tpm2.o] Error 1
As mentioned above: "Flexible array members have incomplete type, and
so the sizeof operator may not be applied. As a quirk of the original
implementation of zero-length arrays, sizeof evaluates to zero."[1] As
in "sizeof(event_header->event) always evaluated to 0, so removing it
has no effect".
Lastly, make use of the struct_size() helper to deal with the
flexible array member and its host structure.
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
[4] https://github.com/KSPP/linux/issues/43
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
There is export_uuid() function which exports uuid_t to the u8 array.
Use it instead of open coding variant.
This allows to hide the uuid_t internals.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Call disable_interrupts() if we have to revert to polling in order not to
unnecessarily reserve the IRQ for the life-cycle of the driver.
Cc: stable@vger.kernel.org # 4.5.x
Reported-by: Hans de Goede <hdegoede@redhat.com>
Fixes: e3837e74a0 ("tpm_tis: Refactor the interrupt setup")
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
For the algorithm that does not match the bank, a positive
value EINVAL is returned here. I think this is a typo error.
It is necessary to return an error value.
Cc: stable@vger.kernel.org # 5.4.x
Fixes: 9f75c82246 ("KEYS: trusted: correctly initialize digests and fix locking issue")
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Reviewed-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
tpm_ibmvtpm_send() can fail during PowerVM Live Partition Mobility resume
with an H_CLOSED return from ibmvtpm_send_crq(). The PAPR says, 'The
"partner partition suspended" transport event disables the associated CRQ
such that any H_SEND_CRQ hcall() to the associated CRQ returns H_Closed
until the CRQ has been explicitly enabled using the H_ENABLE_CRQ hcall.'
This patch adds a check in tpm_ibmvtpm_send() for an H_CLOSED return from
ibmvtpm_send_crq() and in that case calls tpm_ibmvtpm_resume() and
retries the ibmvtpm_send_crq() once.
Cc: stable@vger.kernel.org # 3.7.x
Fixes: 132f762947 ("drivers/char/tpm: Add new device driver to support IBM vTPM")
Reported-by: Linh Pham <phaml@us.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: George Wilson <gcwilson@linux.ibm.com>
Tested-by: Linh Pham <phaml@us.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
This patch fixes the following problem when the ibmvtpm driver
is built as a module:
ERROR: modpost: "tpm2_get_cc_attrs_tbl" [drivers/char/tpm/tpm_ibmvtpm.ko] undefined!
make[1]: *** [scripts/Makefile.modpost:94: __modpost] Error 1
make: *** [Makefile:1298: modules] Error 2
Fixes: 18b3670d79 ("tpm: ibmvtpm: Add support for TPM2")
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reported-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Commit 9255782f70 ("sysfs: Wrap __compat_only_sysfs_link_entry_to_kobj
function to change the symlink name") made this function a wrapper
around a new non-underscored function, which is a bit odd. The normal
naming convention is the other way around: the underscored function is
the wrappee, and the non-underscored function is the wrapper.
There's only one single user (well, two call-sites in that user) of the
more limited double underscore version of this function, so just remove
the oddly named wrapper entirely and just add the extra NULL argument to
the user.
I considered just doing that in the merge, but that tends to make
history really hard to read.
Link: https://lore.kernel.org/lkml/CAHk-=wgkkmNV5tMzQDmPAQuNJBuMcry--Jb+h8H1o4RA3kF7QQ@mail.gmail.com/
Cc: Sourabh Jain <sourabhjain@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Support TPM2 in the IBM vTPM driver. The hypervisor tells us what
version of TPM is connected through the vio_device_id.
In case a TPM2 device is found, we set the TPM_CHIP_FLAG_TPM2 flag
and get the command codes attributes table. The driver does
not need the timeouts and durations, though.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Nayna Jain <nayna@linux.ibm.com>
Tested-by: Nayna Jain <nayna@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Synchronize with the results from the CRQs before continuing with
the initialization. This avoids trying to send TPM commands while
the rtce buffer has not been allocated, yet.
This patch fixes an existing race condition that may occurr if the
hypervisor does not quickly respond to the VTPM_GET_RTCE_BUFFER_SIZE
request sent during initialization and therefore the ibmvtpm->rtce_buf
has not been allocated at the time the first TPM command is sent.
Fixes: 132f762947 ("drivers/char/tpm: Add new device driver to support IBM vTPM")
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Nayna Jain <nayna@linux.ibm.com>
Tested-by: Nayna Jain <nayna@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
A vTPM 2.0 is identified by 'IBM,vtpm20' in the 'compatible' node in
the device tree. Handle it in the same way as 'IBM,vtpm'.
The vTPM 2.0's log is written in little endian format so that for this
aspect we can rely on existing code.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Nayna Jain <nayna@linux.ibm.com>
Tested-by: Nayna Jain <nayna@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
In a recent change to the SPI subsystem [1], a new `delay` struct was added
to replace the `delay_usecs`. This change replaces the current
`delay_usecs` with `delay` for this driver.
The `spi_transfer_delay_exec()` function [in the SPI framework] makes sure
that both `delay_usecs` & `delay` are used (in this order to preserve
backwards compatibility).
[1] commit bebcfd272d ("spi: introduce `delay` field for
`spi_transfer` + spi_transfer_delay_exec()")
Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@analog.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
In a recent change to the SPI subsystem [1], a new 'delay' struct was added
to replace the 'delay_usecs'. This change replaces the current
'delay_usecs' with 'delay' for this driver.
The 'spi_transfer_delay_exec()' function [in the SPI framework] makes sure
that both 'delay_usecs' & 'delay' are used (in this order to preserve
backwards compatibility).
[1] commit bebcfd272d ("spi: introduce `delay` field for
`spi_transfer` + spi_transfer_delay_exec()")
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
If .next function does not change position index,
following .show function will repeat output related
to current position index.
For /sys/kernel/security/tpm0/binary_bios_measurements:
1) read after lseek beyound end of file generates whole last line.
2) read after lseek to middle of last line generates
expected end of last line and unexpected whole last line once again.
Cc: stable@vger.kernel.org # 4.19.x
Fixes: 1f4aace60b ("fs/seq_file.c: simplify seq_file iteration code ...")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206283
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
If .next function does not change position index,
following .show function will repeat output related
to current position index.
In case of /sys/kernel/security/tpm0/ascii_bios_measurements
and binary_bios_measurements:
1) read after lseek beyound end of file generates whole last line.
2) read after lseek to middle of last line generates
expected end of last line and unexpected whole last line once again.
Cc: stable@vger.kernel.org # 4.19.x
Fixes: 1f4aace60b ("fs/seq_file.c: simplify seq_file iteration code ...")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206283
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
If a TPM is in disabled state, it's reasonable for it to have an empty
log. Bailing out of probe in this case means that the PPI interface
isn't available, so there's no way to then enable the TPM from the OS.
In general it seems reasonable to ignore log errors - they shouldn't
interfere with any other TPM functionality.
Signed-off-by: Matthew Garrett <matthewgarrett@google.com>
Cc: stable@vger.kernel.org # 4.19.x
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
chip->allocated_banks, an array of tpm_bank_info structures, contains the
list of TPM algorithm IDs of allocated PCR banks. It also contains the
corresponding ID of the crypto subsystem, so that users of the TPM driver
can calculate a digest for a PCR extend operation.
However, if there is no mapping between TPM algorithm ID and crypto ID, the
crypto_id field of tpm_bank_info remains set to zero (the array is
allocated and initialized with kcalloc() in tpm2_get_pcr_allocation()).
Zero should not be used as value for unknown mappings, as it is a valid
crypto ID (HASH_ALGO_MD4).
Thus, initialize crypto_id to HASH_ALGO__LAST.
Cc: stable@vger.kernel.org # 5.1.x
Fixes: 879b589210 ("tpm: retrieve digest size of unknown algorithms with PCR read")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Revert tpm_tis_spi_mod.ko back to tpm_tis_spi.ko as the rename could
break user space scripts. This can be achieved by renaming tpm_tis_spi.c
as tpm_tis_spi_main.c. Then tpm_tis_spi-y can be used inside the
makefile.
Cc: Andrey Pronin <apronin@chromium.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: stable@vger.kernel.org # 5.5.x
Fixes: 797c0113c9 ("tpm: tpm_tis_spi: Support cr50 devices")
Reported-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Tested-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Easily determining what TCG version a tpm device implements
has been a pain point for userspace for a long time, so
add a sysfs file to report the TCG major version of a tpm device.
Also add an entry to Documentation/ABI/stable/sysfs-class-tpm
describing the new file.
Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: Mimi Zohar <zohar@linux.ibm.com>
Cc: Peter Huewe <peterhuewe@gmx.de>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-integrity@vger.kernel.org
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
The priv->response_length can hold the size of an response or an negative
error code, and the tpm_common_read() needs to handle both cases correctly.
Changed the type of response_length to signed and accounted for negative
value in tpm_common_read().
Cc: stable@vger.kernel.org
Fixes: d23d124843 ("tpm: fix invalid locking in NONBLOCKING mode")
Reported-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
There has been a bunch of reports (one from kernel bugzilla linked)
reporting that when this commit is applied it causes on some machines
boot freezes.
Unfortunately hardware where this commit causes a failure is not widely
available (only one I'm aware is Lenovo T490), which means we cannot
predict yet how long it will take to properly fix tpm_tis interrupt
probing.
Thus, the least worst short term action is to revert the code to the
state before this commit. In long term we need fix the tpm_tis probing
code to work on machines that Stefan's fix was supposed to fix.
Fixes: 21df4a8b60 ("tpm_tis: reserve chip for duration of tpm_tis_core_init")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=205935
Cc: stable@vger.kernel.org
Cc: Jerry Snitselaar <jsnitsel@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Tested-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Xiaoping Zhou <xiaoping.zhou@intel.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reported-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
There has been a bunch of reports (one from kernel bugzilla linked)
reporting that when this commit is applied it causes on some machines
boot freezes.
Unfortunately hardware where this commit causes a failure is not widely
available (only one I'm aware is Lenovo T490), which means we cannot
predict yet how long it will take to properly fix tpm_tis interrupt
probing.
Thus, the least worst short term action is to revert the code to the
state before this commit. In long term we need fix the tpm_tis probing
code to work on machines that Stefan's fix was supposed to fix.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=205935
Fixes: 1ea32c83c6 ("tpm_tis_core: Set TPM_CHIP_FLAG_IRQ before probing for interrupts")
Cc: stable@vger.kernel.org
Cc: Jerry Snitselaar <jsnitsel@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Tested-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Xiaoping Zhou <xiaoping.zhou@intel.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reported-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Revert a commit, which was included in Linux v5.5-rc3 because it did not
properly fix the issues it was supposed to fix.
Fixes: 21df4a8b60 ("tpm_tis: reserve chip for duration of tpm_tis_core_init")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=205935
Cc: stable@vger.kernel.org
Cc: Jerry Snitselaar <jsnitsel@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Tested-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Xiaoping Zhou <xiaoping.zhou@intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Add shutdown call back to close existing session with fTPM TA
to support kexec scenario.
Add parentheses to function names in comments as specified in kdoc.
Signed-off-by: Thirupathaiah Annapureddy <thiruan@microsoft.com>
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
When an application sends TPM commands in NONBLOCKING mode
the driver holds chip->tpm_mutex returning from write(),
which triggers: "WARNING: lock held when returning to user space".
To fix this issue the driver needs to release the mutex before
returning and acquire it again in tpm_dev_async_work() before
sending the command.
Cc: stable@vger.kernel.org
Fixes: 9e1b74a63f (tpm: add support for nonblocking operation)
Reported-by: Jeffrin Jose T <jeffrin@rajagiritech.edu.in>
Tested-by: Jeffrin Jose T <jeffrin@rajagiritech.edu.in>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
The original code, before it was moved into security/keys/trusted-keys
had a flush after the blob unseal. Without that flush, the volatile
handles increase in the TPM until it becomes unusable and the system
either has to be rebooted or the TPM volatile area manually flushed.
Fix by adding back the lost flush, which we now have to export because
of the relocation of the trusted key code may cause the consumer to be
modular.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Fixes: 2e19e10131 ("KEYS: trusted: Move TPM2 trusted keys code")
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Instead of repeatedly calling tpm_chip_start/tpm_chip_stop when
issuing commands to the tpm during initialization, just reserve the
chip after wait_startup, and release it when we are ready to call
tpm_chip_register.
Cc: Christian Bundy <christianbundy@fraction.io>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Peter Huewe <peterhuewe@gmx.de>
Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Stefan Berger <stefanb@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org
Cc: linux-integrity@vger.kernel.org
Fixes: a3fbfae82b ("tpm: take TPM chip power gating out of tpm_transmit()")
Fixes: 5b359c7c43 ("tpm_tis_core: Turn on the TPM before probing IRQ's")
Suggested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
As part of the cleanup of some remaining y2038 issues, I came to
fs/compat_ioctl.c, which still has a couple of commands that need support
for time64_t.
In completely unrelated work, I spent time on cleaning up parts of this
file in the past, moving things out into drivers instead.
After Al Viro reviewed an earlier version of this series and did a lot
more of that cleanup, I decided to try to completely eliminate the rest
of it and move it all into drivers.
This series incorporates some of Al's work and many patches of my own,
but in the end stops short of actually removing the last part, which is
the scsi ioctl handlers. I have patches for those as well, but they need
more testing or possibly a rewrite.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=lgCl
-----END PGP SIGNATURE-----
Merge tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground
Pull removal of most of fs/compat_ioctl.c from Arnd Bergmann:
"As part of the cleanup of some remaining y2038 issues, I came to
fs/compat_ioctl.c, which still has a couple of commands that need
support for time64_t.
In completely unrelated work, I spent time on cleaning up parts of
this file in the past, moving things out into drivers instead.
After Al Viro reviewed an earlier version of this series and did a lot
more of that cleanup, I decided to try to completely eliminate the
rest of it and move it all into drivers.
This series incorporates some of Al's work and many patches of my own,
but in the end stops short of actually removing the last part, which
is the scsi ioctl handlers. I have patches for those as well, but they
need more testing or possibly a rewrite"
* tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: (42 commits)
scsi: sd: enable compat ioctls for sed-opal
pktcdvd: add compat_ioctl handler
compat_ioctl: move SG_GET_REQUEST_TABLE handling
compat_ioctl: ppp: move simple commands into ppp_generic.c
compat_ioctl: handle PPPIOCGIDLE for 64-bit time_t
compat_ioctl: move PPPIOCSCOMPRESS to ppp_generic
compat_ioctl: unify copy-in of ppp filters
tty: handle compat PPP ioctls
compat_ioctl: move SIOCOUTQ out of compat_ioctl.c
compat_ioctl: handle SIOCOUTQNSD
af_unix: add compat_ioctl support
compat_ioctl: reimplement SG_IO handling
compat_ioctl: move WDIOC handling into wdt drivers
fs: compat_ioctl: move FITRIM emulation into file systems
gfs2: add compat_ioctl support
compat_ioctl: remove unused convert_in_user macro
compat_ioctl: remove last RAID handling code
compat_ioctl: remove /dev/raw ioctl translation
compat_ioctl: remove PCI ioctl translation
compat_ioctl: remove joystick ioctl translation
...
platform_get_irq() calls dev_err() on an error. As the IRQ usage in the
tpm_tis driver is optional, this is undesirable.
Specifically this leads to this new false-positive error being logged:
[ 5.135413] tpm_tis MSFT0101:00: IRQ index 0 not found
This commit switches to platform_get_irq_optional(), which does not log
an error, fixing this.
Fixes: 7723f4c5ec ("driver core: platform: Add an error message to platform_get_irq*()"
Cc: <stable@vger.kernel.org> # 5.4.x
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Bug link: https://bugzilla.kernel.org/show_bug.cgi?id=195657
cmd/rsp buffers are expected to be in the same ACPI region.
For Zen+ CPUs BIOS's might report two different regions, some of
them also report region sizes inconsistent with values from TPM
registers.
Memory configuration on ASRock x470 ITX:
db0a0000-dc59efff : Reserved
dc57e000-dc57efff : MSFT0101:00
dc582000-dc582fff : MSFT0101:00
Work around the issue by storing ACPI regions declared for the
device in a fixed array and adding an array for pointers to
corresponding possibly allocated resources in crb_map_io function.
This data was previously held for a single resource
in struct crb_priv (iobase field) and local variable io_res in
crb_map_io function. ACPI resources array is used to find index of
corresponding region for each buffer and make the buffer size
consistent with region's length. Array of pointers to allocated
resources is used to map the region at most once.
Signed-off-by: Ivan Lazeev <ivan.lazeev@gmail.com>
Tested-by: Jerry Snitselaar <jsnitsel@redhat.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Move TPM2 trusted keys code to trusted keys subsystem. The reason
being it's better to consolidate all the trusted keys code to a single
location so that it can be maintained sanely.
Also, utilize existing tpm_send() exported API which wraps the internal
tpm_transmit_cmd() API.
Suggested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Move tpm_buf code to common include/linux/tpm.h header so that it can
be reused via other subsystems like trusted keys etc.
Also rename trusted keys and asymmetric keys usage of TPM 1.x buffer
implementation to tpm1_buf to avoid any compilation errors.
Suggested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
The current code uses GFP_HIGHMEM, which is wrong because GFP_HIGHMEM
(on 32 bit systems) is memory ordinarily inaccessible to the kernel
and should only be used for allocations affecting userspace. In order
to make highmem visible to the kernel on 32 bit it has to be kmapped,
which consumes valuable entries in the kmap region. Since the tpm_buf
is only ever used in the kernel, switch to using a GFP_KERNEL
allocation so as not to waste kmap space on 32 bits.
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
devm_kcalloc() can fail and return NULL so we need to check for that.
Cc: stable@vger.kernel.org
Fixes: 58472f5cd4 ("tpm: validate TPM 2.0 commands")
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Some of these includes aren't used, for example of_gpio.h and freezer.h,
or they are missing, for example kernel.h for min_t() usage. Add missing
headers and remove unused ones so that we don't have to expand all these
headers into this file when they're not actually necessary.
Cc: Andrey Pronin <apronin@chromium.org>
Cc: Duncan Laurie <dlaurie@chromium.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Alexander Steffen <Alexander.Steffen@infineon.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Add TPM2.0 PTP FIFO compatible SPI interface for chips with Cr50
firmware. The firmware running on the currently supported H1 Secure
Microcontroller requires a special driver to handle its specifics:
- need to ensure a certain delay between SPI transactions, or else
the chip may miss some part of the next transaction
- if there is no SPI activity for some time, it may go to sleep,
and needs to be waken up before sending further commands
- access to vendor-specific registers
Cr50 firmware has a requirement to wait for the TPM to wakeup before
sending commands over the SPI bus. Otherwise, the firmware could be in
deep sleep and not respond. The method to wait for the device to wakeup
is slightly different than the usual flow control mechanism described in
the TCG SPI spec. Add a completion to tpm_tis_spi_transfer() before we
start a SPI transfer so we can keep track of the last time the TPM
driver accessed the SPI bus to support the flow control mechanism.
Split the cr50 logic off into a different file to keep it out of the
normal code flow of the existing SPI driver while making it all part of
the same module when the code is optionally compiled into the same
module. Export a new function, tpm_tis_spi_init(), and the associated
read/write/transfer APIs so that we can do this. Make the cr50 code wrap
the tpm_tis_spi_phy struct with its own struct to override the behavior
of tpm_tis_spi_transfer() by supplying a custom flow control hook. This
shares the most code between the core driver and the cr50 support
without combining everything into the core driver or exporting module
symbols.
Signed-off-by: Andrey Pronin <apronin@chromium.org>
Cc: Andrey Pronin <apronin@chromium.org>
Cc: Duncan Laurie <dlaurie@chromium.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Alexander Steffen <Alexander.Steffen@infineon.com>
Cc: Heiko Stuebner <heiko@sntech.de>
[swboyd@chromium.org: Replace boilerplate with SPDX tag, drop
suspended bit and remove ifdef checks in cr50.h, migrate to functions
exported in tpm_tis_spi.h, combine into one module instead of two]
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cr50 firmware has a different flow control protocol than the one used by
this TPM PTP SPI driver. Introduce a flow control callback so we can
override the standard sequence with the custom one that Cr50 uses.
Cc: Andrey Pronin <apronin@chromium.org>
Cc: Duncan Laurie <dlaurie@chromium.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Alexander Steffen <Alexander.Steffen@infineon.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
On some platforms, the TPM power is managed by firmware and therefore we
don't need to stop the TPM on suspend when going to a light version of
suspend such as S0ix ("freeze" suspend state). Add a chip flag,
TPM_CHIP_FLAG_FIRMWARE_POWER_MANAGED, to indicate this so that certain
platforms can probe for the usage of this light suspend and avoid
touching the TPM state across suspend/resume.
Cc: Andrey Pronin <apronin@chromium.org>
Cc: Duncan Laurie <dlaurie@chromium.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Alexander Steffen <Alexander.Steffen@infineon.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
There was revealed a bug in the STM TPM chipset used in Dell R415s.
Bug is observed so far only on chipset firmware 1.2.8.28
(1.2 TPM, device-id 0x0, rev-id 78). After some number of
operations chipset hangs and stays in inconsistent state:
tpm_tis 00:09: Operation Timed out
tpm_tis 00:09: tpm_transmit: tpm_send: error -5
Durations returned by the chip are the same like on other
firmware revisions but apparently with specifically 1.2.8.28 fw
durations should be reset to 2 minutes to enable tpm chip work
properly. No working way of updating firmware was found.
This patch adds implementation of ->update_durations method
that matches only STM devices with specific firmware version.
Cc: Peter Huewe <peterhuewe@gmx.de>
Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Alexey Klimov <aklimov@redhat.com>
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> (!update_durations path)
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> (!update_durations path)
Patch adds method ->update_durations to override returned
durations in case TPM chip misbehaves for TPM 1.2 drivers.
Cc: Peter Huewe <peterhuewe@gmx.de>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Alexey Klimov <aklimov@redhat.com>
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> (!update_durations path)
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Replace existing TPM 1.x version structs with new structs that consolidate
the common parts into a single struct so that code duplication is no longer
needed in caps_show().
Cc: Peter Huewe <peterhuewe@gmx.de>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Alexey Klimov <aklimov@redhat.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Tested-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Each of these drivers has a copy of the same trivial helper function to
convert the pointer argument and then call the native ioctl handler.
We now have a generic implementation of that, so use it.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Jiri Kosina <jkosina@suse.cz>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
tpm_send() does not give anymore the result back to the caller. This
would require another memcpy(), which kind of tells that the whole
approach is somewhat broken. Instead, as Mimi suggested, this commit
just wraps the data to the tpm_buf, and thus the result will not go to
the garbage.
Obviously this assumes from the caller that it passes large enough
buffer, which makes the whole API somewhat broken because it could be
different size than @buflen but since trusted keys is the only module
using this API right now I think that this fix is sufficient for the
moment.
In the near future the plan is to replace the parameters with a tpm_buf
created by the caller.
Reported-by: Mimi Zohar <zohar@linux.ibm.com>
Suggested-by: Mimi Zohar <zohar@linux.ibm.com>
Cc: stable@vger.kernel.org
Fixes: 412eb58558 ("use tpm_buf in tpm_transmit_cmd() as the IO parameter")
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Commit 0b6cf6b97b ("tpm: pass an array of tpm_extend_digest structures to
tpm_pcr_extend()") modifies tpm_pcr_extend() to accept a digest for each
PCR bank. After modification, tpm_pcr_extend() expects that digests are
passed in the same order as the algorithms set in chip->allocated_banks.
This patch fixes two issues introduced in the last iterations of the patch
set: missing initialization of the TPM algorithm ID in the tpm_digest
structures passed to tpm_pcr_extend() by the trusted key module, and
unreleased locks in the TPM driver due to returning from tpm_pcr_extend()
without calling tpm_put_ops().
Cc: stable@vger.kernel.org
Fixes: 0b6cf6b97b ("tpm: pass an array of tpm_extend_digest structures to tpm_pcr_extend()")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Suggested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Remove all comments about implicit locking tpm-sysfs.c as the file was
updated in Linux v5.1 to use explicit locking.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
The tpm_tis_core has to set the TPM_CHIP_FLAG_IRQ before probing for
interrupts since there is no other place in the code that would set
it.
Cc: linux-stable@vger.kernel.org
Fixes: 570a36097f ("tpm: drop 'irq' from struct tpm_vendor_specific")
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
The interrupt probing sequence in tpm_tis_core cannot obviously run with
the TPM power gated. Power on the TPM with tpm_chip_start() before
probing IRQ's. Turn it off once the probing is complete.
Cc: linux-stable@vger.kernel.org
Fixes: a3fbfae82b ("tpm: take TPM chip power gating out of tpm_transmit()")
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
The nr_allocated_banks and allocated banks are initialized as part of
tpm_chip_register. Currently, this is done as part of auto startup
function. However, some drivers, like the ibm vtpm driver, do not run
auto startup during initialization. This results in uninitialized memory
issue and causes a kernel panic during boot.
This patch moves the pcr allocation outside the auto startup function
into tpm_chip_register. This ensures that allocated banks are initialized
in any case.
Fixes: 879b589210 ("tpm: retrieve digest size of unknown algorithms with PCR read")
Reported-by: Michal Suchanek <msuchanek@suse.de>
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Tested-by: Michal Suchánek <msuchanek@suse.de>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
After the first call to GetEventLog() on UEFI systems using the TCG2
crypto agile log format, any further log events (other than those
triggered by ExitBootServices()) will be logged in both the main log and
also in the Final Events Log. While the kernel only calls GetEventLog()
immediately before ExitBootServices(), we can't control whether earlier
parts of the boot process have done so. This will result in log entries
that exist in both logs, and so the current approach of simply appending
the Final Event Log to the main log will result in events being
duplicated.
We can avoid this problem by looking at the size of the Final Event Log
just before we call ExitBootServices() and exporting this to the main
kernel. The kernel can then skip over all events that occured before
ExitBootServices() and only append events that were not also logged to
the main log.
Signed-off-by: Matthew Garrett <mjg59@google.com>
Reported-by: Joe Richey <joerichey@google.com>
Suggested-by: Joe Richey <joerichey@google.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Any events that are logged after GetEventsLog() is called are logged to
the EFI Final Events table. These events are defined as being in the
crypto agile log format, so we can just append them directly to the
existing log if it's in the same format. In theory we can also construct
old-style SHA1 log entries for devices that only return logs in that
format, but EDK2 doesn't generate the final event log in that case so
it doesn't seem worth it at the moment.
Signed-off-by: Matthew Garrett <mjg59@google.com>
Reviewed-by: Bartosz Szczepanek <bsz@semihalf.com>
Tested-by: Bartosz Szczepanek <bsz@semihalf.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
UEFI systems provide a boot services protocol for obtaining the TPM
event log, but this is unusable after ExitBootServices() is called.
Unfortunately ExitBootServices() itself triggers additional TPM events
that then can't be obtained using this protocol. The platform provides a
mechanism for the OS to obtain these events by recording them to a
separate UEFI configuration table which the OS can then map.
Unfortunately this table isn't self describing in terms of providing its
length, so we need to parse the events inside it to figure out how long
it is. Since the table isn't mapped at this point, we need to extend the
length calculation function to be able to map the event as it goes
along.
(Fixes by Bartosz Szczepanek <bsz@semihalf.com>)
Signed-off-by: Matthew Garrett <mjg59@google.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Bartosz Szczepanek <bsz@semihalf.com>
Tested-by: Bartosz Szczepanek <bsz@semihalf.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
We need to calculate the size of crypto agile events in multiple
locations, including in the EFI boot stub. The easiest way to do this is
to put it in a header file as an inline and leave a wrapper to ensure we
don't end up with multiple copies of it embedded in the existing code.
Signed-off-by: Matthew Garrett <mjg59@google.com>
Reviewed-by: Bartosz Szczepanek <bsz@semihalf.com>
Tested-by: Bartosz Szczepanek <bsz@semihalf.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
A "get random" may fail with a TPM error, but those codes were returned
as-is to the caller, which assumed the result was the number of bytes
that had been written to the target buffer, which could lead to a kernel
heap memory exposure and over-read.
This fixes tpm1_get_random() to mask positive TPM errors into -EIO, as
before.
[ 18.092103] tpm tpm0: A TPM error (379) occurred attempting get random
[ 18.092106] usercopy: Kernel memory exposure attempt detected from SLUB object 'kmalloc-64' (offset 0, size 379)!
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1650989
Reported-by: Phil Baker <baker1tex@gmail.com>
Reported-by: Craig Robson <craig@zhatt.com>
Fixes: 7aee9c52d7 ("tpm: tpm1: rewrite tpm1_get_random() using tpm_buf structure")
Cc: Laura Abbott <labbott@redhat.com>
Cc: Tomas Winkler <tomas.winkler@intel.com>
Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Tomas Winkler <tomas.winkler@intel.com>
Tested-by: Bartosz Szczepanek <bsz@semihalf.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Based on 1 normalized pattern(s):
gplv2
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 58 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081207.556988620@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
