mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
synced 2025-08-27 06:50:37 +00:00
loongarch-next
1457 Commits
Author | SHA1 | Message | Date | |
---|---|---|---|---|
![]() |
0f46f50845 |
soc: driver updates for 6.17
Changes are all over the place, but very little sticks out as noteworthy. There is a new misc driver for the Raspberry Pi 5's RP1 multifunction I/O chip, along with hooking it up to the pinctrl and clk frameworks. The reset controller and memory subsystems have mainly small updates, but there are two new reset drivers for the K230 and VC1800B SoCs, and new memory driver support for Tegra264. The ARM SMCCC and SCMI firmware drivers gain a few more features that should help them be supported across more environments. Similarly, the SoC specific firmware on Tegra and Qualcomm get minor enhancements and chip support. In the drivers/soc/ directory, the ASPEED LPC snoop driver gets an overhaul for code robustness, the Tegra and Qualcomm and NXP drivers grow to support more chips, while the Hisilicon, Mediatek and Renesas drivers see mostly janitorial fixes. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmiEmIcACgkQmmx57+YA GNkE4g/6A2OKti+qtIsLt10zS7paGP38ftu9ad27WC54AOGgVk4ZXt8mVGRmqOf+ BICIM+wc4gehdvRJTRnq3gZg3e1puuYdcMuBOh4qsghRMjdYUKfNairtn/iX7d+f e5auzz5/gV7MWNM7jiQNydCqZSeV6u2/cqD5iRCrRgaB5FOG4yY1BkAsah1UzZjk MycudqjkK4IX5zp5oqXB/PoesULAbB2unjvfw194LATYSqmcRLQRWFdv4aM0R6ba TDP5x0d95nhMTNWif3495zc2WxdSYzbD4lNv44RPpKDywqBj+qFBI/EpMFkxQ5Hy cqv60Dm+/tx+DBO/Ma0zJzsV4ChRIEBNkTUh36OxmYxq70x1T4FEynZ6IT8a8dXD ltjHwOcTHp1M0OpNj+PIFBD+ohWFWKOo+T9GRtTInLjUGBlJA6LK9i4Lb0DaIyRt DmmvbZCwh0PI/nZiyQzw7rsXWwqDcqeF8FScw+9ooBk7Z7Jr1gMc52ya0qrRWQ8w Tr3D+lNE0aDfErnx4RrNsjD8lpX4nOfRFvuWSTlWqkBjGhoDP/tnNi2RCWmbXo2Z PDDWLnECo6o1aIxYO/tHjbFKVJB38p4e/LLP89htu8dFxSZKnVzxosnOvEVWS8+Y a0oZb9j1tAOYHmMWDm+zaQ7BlK9CMURNTdUcnqNqIvZpHnHz9M8= =7T40 -----END PGP SIGNATURE----- Merge tag 'soc-drivers-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull SoC driver updates from Arnd Bergmann: "Changes are all over the place, but very little sticks out as noteworthy. There is a new misc driver for the Raspberry Pi 5's RP1 multifunction I/O chip, along with hooking it up to the pinctrl and clk frameworks. The reset controller and memory subsystems have mainly small updates, but there are two new reset drivers for the K230 and VC1800B SoCs, and new memory driver support for Tegra264. The ARM SMCCC and SCMI firmware drivers gain a few more features that should help them be supported across more environments. Similarly, the SoC specific firmware on Tegra and Qualcomm get minor enhancements and chip support. In the drivers/soc/ directory, the ASPEED LPC snoop driver gets an overhaul for code robustness, the Tegra and Qualcomm and NXP drivers grow to support more chips, while the Hisilicon, Mediatek and Renesas drivers see mostly janitorial fixes" * tag 'soc-drivers-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (100 commits) bus: del unnecessary init var soc: fsl: qe: convert set_multiple() to returning an integer pinctrl: rp1: use new GPIO line value setter callbacks soc: hisilicon: kunpeng_hccs: Fix incorrect log information dt-bindings: soc: qcom: qcom,pmic-glink: document Milos compatible dt-bindings: soc: qcom,aoss-qmp: document the Milos Always-On Subsystem side channel dt-bindings: firmware: qcom,scm: document Milos SCM Firmware Interface soc: qcom: socinfo: Add support to retrieve APPSBL build details soc: qcom: pmic_glink: fix OF node leak soc: qcom: spmi-pmic: add more PMIC SUBTYPE IDs soc: qcom: socinfo: Add PM7550 & PMIV0108 PMICs soc: qcom: socinfo: Add SoC IDs for SM7635 family dt-bindings: arm: qcom,ids: Add SoC IDs for SM7635 family firmware: qcom: scm: request the waitqueue irq *after* initializing SCM firmware: qcom: scm: initialize tzmem before marking SCM as available firmware: qcom: scm: take struct device as argument in SHM bridge enable firmware: qcom: scm: remove unused arguments from SHM bridge routines soc: qcom: rpmh-rsc: Add RSC version 4 support memory: tegra: Add Tegra264 MC and EMC support firmware: tegra: bpmp: Fix build failure for tegra264-only config ... |
||
![]() |
0d5ec7919f |
Char / Misc / IIO / other driver updates for 6.17-rc1
Here is the big set of char/misc/iio and other smaller driver subsystems for 6.17-rc1. It's a big set this time around, with the huge majority being in the iio subsystem with new drivers and dts files being added there. Highlights include: - IIO driver updates, additions, and changes making more code const and cleaning up some init logic - bus_type constant conversion changes - misc device test functions added - rust miscdevice minor fixup - unused function removals for some drivers - mei driver updates - mhi driver updates - interconnect driver updates - Android binder updates and test infrastructure added - small cdx driver updates - small comedi fixes - small nvmem driver updates - small pps driver updates - some acrn virt driver fixes for printk messages - other small driver updates All of these have been in linux-next with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaIeYDg8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+yk3dwCdF6xoEVZaDkLM5IF3XKWWgdYxjNsAoKUy2kUx YtmVh4S0tMmugfeRGac7 =3Wxi -----END PGP SIGNATURE----- Merge tag 'char-misc-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc / IIO / other driver updates from Greg KH: "Here is the big set of char/misc/iio and other smaller driver subsystems for 6.17-rc1. It's a big set this time around, with the huge majority being in the iio subsystem with new drivers and dts files being added there. Highlights include: - IIO driver updates, additions, and changes making more code const and cleaning up some init logic - bus_type constant conversion changes - misc device test functions added - rust miscdevice minor fixup - unused function removals for some drivers - mei driver updates - mhi driver updates - interconnect driver updates - Android binder updates and test infrastructure added - small cdx driver updates - small comedi fixes - small nvmem driver updates - small pps driver updates - some acrn virt driver fixes for printk messages - other small driver updates All of these have been in linux-next with no reported issues" * tag 'char-misc-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (292 commits) binder: Use seq_buf in binder_alloc kunit tests binder: Add copyright notice to new kunit files misc: ti_fpc202: Switch to of_fwnode_handle() bus: moxtet: Use dev_fwnode() pc104: move PC104 option to drivers/Kconfig drivers: virt: acrn: Don't use %pK through printk comedi: fix race between polling and detaching interconnect: qcom: Add Milos interconnect provider driver dt-bindings: interconnect: document the RPMh Network-On-Chip Interconnect in Qualcomm Milos SoC mei: more prints with client prefix mei: bus: use cldev in prints bus: mhi: host: pci_generic: Add Telit FN990B40 modem support bus: mhi: host: Detect events pointing to unexpected TREs bus: mhi: host: pci_generic: Add Foxconn T99W696 modem bus: mhi: host: Use str_true_false() helper bus: mhi: host: pci_generic: Add support for EM929x and set MRU to 32768 for better performance. bus: mhi: host: Fix endianness of BHI vector table bus: mhi: host: pci_generic: Disable runtime PM for QDU100 bus: mhi: host: pci_generic: Fix the modem name of Foxconn T99W640 dt-bindings: interconnect: qcom,msm8998-bwmon: Allow 'nonposted-mmio' ... |
||
![]() |
335fb3d298 |
bus: moxtet: Use dev_fwnode()
irq_domain_create_simple() takes fwnode as the first argument. It can be extracted from the struct device using dev_fwnode() helper instead of using of_node with of_fwnode_handle(). So use the dev_fwnode() helper. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Reviewed-by: Marek Behún <kabel@kernel.org> Link: https://lore.kernel.org/r/20250723055325.1800024-1-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
![]() |
1c37b63aab |
i.MX drivers changes for 6.17:
- A couple of MAINTAINERS updates - A new bus driver for i.MX AIPSTZ bridge and a follow-up fix from Laurentiu Mihalcea -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmhzO50ACgkQUFdYWoew fM4kRwf/dvp+FsIahhfr1tACaoGvpLsLQwQ/l6ufjAJJk+vyVfFNh1/ttxInQqdL OHot1qbdf8Zo8wfoYNTpSWqo50TfK4wQfvr6JBvUsfdpkkLWeyQOtu/0vKVvve8o 8AQhJc3tS73iLFScp+moUD4fyXiL9GnyRSmHyXxP4DdfM3wQRfZc9pNmXXAX00LV R8xkAv+CeshVqgEPLliSB9269Yq9vCCBcapuVtW5ewW0anSb8ifzuiKNbOo6rY9j LGxXCxx2OUiaxNiP0xa6RxITyPvAExl4+M5/up4+wjyIK5n9QHZNPjlI+etongAy bbrgLKVSZYM1B4k9ANORElxxa+cdYA== =6puG -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmh/+G0ACgkQmmx57+YA GNn+yg//TZpDqdLvMdT7NsYa6z0qHgm9LiiAR57cSXZGwi0YlCc3prEQNfKclwfN zjmPv6OR5wlNfiD9zUVlu39deWvpGraYfgcX/P8j4w4J7msMRnr0AxZbWPGaIiJT 3SNXOfeVe8267g/nC30QYDQYEKUkY5c0nvIesiojnF4mMTsuIromioECLJkpED4M ISFCbK6zHkvjzOKpLJpdmo+XwaIZaLeO5PMKcTrGNw/dHYfNNakpfKh0BwQKqoKL ux2r4XZL0WrqmUAMRTuEWYo1tPQrBT9A2C6cy8ZVn/8fc2JJkxy3UYC1i2bIqft+ cAC2/EczqwAwXHcMD0lBnhG/pg3nrd9/2OPqnMTBBdeUqHiz4dNiIJwVrvUVNW75 ZFuUEdwGNASRur+nf5t/YxTQcWHx+fXY+G5PW89TSCE5O+MdoKhRjQHO6leUJhLh pUZWqA8881IeCYYBLWi4J3wMXqCeHp2f7rGUFTNPTuI+N0/sp1S73hPqJ47rK5VM NU2viC3L/1gHXcaQzIepIPdlHf1b+Etbff0b5N1LKRsV6+JKHlGes2tSreBDQb0V pdG18TYGLz0VPYObJJQryPJHRvMX8oX46bR032nfBXUzUrROktkrD0PP/4rxVMJ+ f1p8FUd50rYCJPNYM8KB0tpvYwYRnC3tsmgF3kiiC/zwisjCyxk= =/Bru -----END PGP SIGNATURE----- Merge tag 'imx-drivers-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/drivers i.MX drivers changes for 6.17: - A couple of MAINTAINERS updates - A new bus driver for i.MX AIPSTZ bridge and a follow-up fix from Laurentiu Mihalcea * tag 'imx-drivers-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: bus: imx-aipstz: allow creating pdevs for child buses MAINTAINERS: Update i.MX entry bus: add driver for IMX AIPSTZ bridge MAINTAINERS: add NXP S32G RTC driver Link: https://lore.kernel.org/r/20250713055441.221235-1-shawnguo2@yeah.net Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
![]() |
8adc8e1657
|
bus: del unnecessary init var
The compiler generates initialization instructions, which consume additional CPU cycles. the sysc_clockdomain_init should assign a value to 'error' before it is read.so the var don't need init to 0. Signed-off-by: Li Jun <lijun01@kylinos.cn> Link: https://lore.kernel.org/r/20250604081712.119523-1-lijun01@kylinos.cn Signed-off-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
![]() |
00559ba3ae |
bus: mhi: host: pci_generic: Add Telit FN990B40 modem support
Add SDX72 based modem Telit FN990B40, reusing FN920C04 configuration. 01:00.0 Unassigned class [ff00]: Qualcomm Device 0309 Subsystem: Device 1c5d:201a Signed-off-by: Daniele Palmas <dnlplm@gmail.com> [mani: added sdx72 in the comment to identify the chipset] Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> Link: https://patch.msgid.link/20250716091836.999364-1-dnlplm@gmail.com |
||
![]() |
5bd398e20f |
bus: mhi: host: Detect events pointing to unexpected TREs
When a remote device sends a completion event to the host, it contains a pointer to the consumed TRE. The host uses this pointer to process all of the TREs between it and the host's local copy of the ring's read pointer. This works when processing completion for chained transactions, but can lead to nasty results if the device sends an event for a single-element transaction with a read pointer that is multiple elements ahead of the host's read pointer. For instance, if the host accesses an event ring while the device is updating it, the pointer inside of the event might still point to an old TRE. If the host uses the channel's xfer_cb() to directly free the buffer pointed to by the TRE, the buffer will be double-freed. This behavior was observed on an ep that used upstream EP stack without 'commit |
||
![]() |
0d63055e14 |
bus: mhi: host: pci_generic: Add Foxconn T99W696 modem
T99W696 modem is based on Qualcomm SDX61 chipset, which is an economic version compared to the baseline SDX62/SDX65 chipsets. Add support for it by introducing a new 'mhi_channel_config'. Since this modem supports the NMEA channel, a new config is needed. Signed-off-by: Slark Xiao <slark_xiao@163.com> [mani: reworded commit message] Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> Link: https://patch.msgid.link/20250528092232.16111-1-slark_xiao@163.com |
||
![]() |
e99f55e438 |
bus: mhi: host: Use str_true_false() helper
Remove hard-coded strings by using the str_true_false() helper. Signed-off-by: Yumeng Fang <fang.yumeng@zte.com.cn> Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> Link: https://patch.msgid.link/20250623202814633ukJqUDLU7BRlLLhvWkbD7@zte.com.cn |
||
![]() |
b484fa61ac |
bus: mhi: host: pci_generic: Add support for EM929x and set MRU to 32768 for better performance.
Add MHI controller config for EM929x. It uses the same configuration as EM919x. Also set the MRU to 32768 to improve downlink throughput. 02:00.0 Unassigned class [ff00]: Qualcomm Technologies, Inc Device 0308 Subsystem: Device 18d7:0301 Signed-off-by: Adam Xue <zxue@semtech.com> Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> Link: https://patch.msgid.link/20250528175943.12739-1-zxue@semtech.com |
||
![]() |
f471578e8b |
bus: mhi: host: Fix endianness of BHI vector table
On big endian platform like PowerPC, the MHI bus (which is little endian)
does not start properly. The following example shows the error messages by
using QCN9274 WLAN device with ath12k driver:
ath12k_pci 0001:01:00.0: BAR 0: assigned [mem 0xc00000000-0xc001fffff 64bit]
ath12k_pci 0001:01:00.0: MSI vectors: 1
ath12k_pci 0001:01:00.0: Hardware name: qcn9274 hw2.0
ath12k_pci 0001:01:00.0: failed to set mhi state: POWER_ON(2)
ath12k_pci 0001:01:00.0: failed to start mhi: -110
ath12k_pci 0001:01:00.0: failed to power up :-110
ath12k_pci 0001:01:00.0: failed to create soc core: -110
ath12k_pci 0001:01:00.0: failed to init core: -110
ath12k_pci: probe of 0001:01:00.0 failed with error -110
The issue seems to be with the incorrect DMA address/size used for
transferring the firmware image over BHI. So fix it by converting the DMA
address and size of the BHI vector table to little endian format before
sending them to the device.
Fixes:
|
||
![]() |
0494cf9793 |
bus: mhi: host: pci_generic: Disable runtime PM for QDU100
The QDU100 device does not support the MHI M3 state, necessitating the disabling of runtime PM for this device. It is essential to disable runtime PM if the device does not support M3 state. Signed-off-by: Vivek Pernamitta <quic_vpernami@quicinc.com> [mani: Fixed the kdoc comment for no_m3] Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com> Link: https://patch.msgid.link/20250425-vdev_next-20250411_pm_disable-v4-1-d4870a73ebf9@quicinc.com |
||
![]() |
ae5a342643 |
bus: mhi: host: pci_generic: Fix the modem name of Foxconn T99W640
T99W640 was mistakenly mentioned as T99W515. T99W515 is a LGA device, not
a M.2 modem device. So correct it's name to avoid name mismatch issue.
Fixes:
|
||
![]() |
bddbe13d36 |
bus: fsl-mc: Fix potential double device reference in fsl_mc_get_endpoint()
The fsl_mc_get_endpoint() function may call fsl_mc_device_lookup() twice, which would increment the device's reference count twice if both lookups find a device. This could lead to a reference count leak. Found by code review. Cc: stable@vger.kernel.org Fixes: |
||
![]() |
5080cf6339 |
bus: imx-aipstz: allow creating pdevs for child buses
devm_of_platform_populate() passes a NULL as the bus OF match table
to the underlying of_platform_populate(), meaning child bus devices
of the AIPSTZ bridge will not have its children devices created. Since
some SoCs (e.g. i.MX8MP) use this particular setup (e.g. SPBA bus, which
is a child of AIPSTZ5 and has multiple child nodes), the driver needs to
support it.
Therefore, replace devm_of_platform_populate() with of_platform_populate()
and pass a reference to the bus OF match table to it. For now, the only
possible child buses are simple buses.
Since the usage of devres is dropped, the complementary operation of
of_platform_populate() needs to be called during the driver's removal.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Fixes:
|
||
![]() |
796cba2dd4 |
bus: add driver for IMX AIPSTZ bridge
The secure AHB to IP Slave (AIPSTZ) bus bridge provides access control configurations meant to restrict access to certain peripherals. Some of the configurations include: 1) Marking masters as trusted for R/W. Based on this (and the configuration of the accessed peripheral), the bridge may choose to abort the R/W transactions issued by certain masters. 2) Allowing/disallowing write accesses to peripherals. Add driver for this IP. Since there's currently no framework for access controllers (and since there's currently no need for having flexibility w.r.t the configurations) all this driver does is it applies a relaxed, "default" configuration, in which all masters are trusted for R/W. Note that some instances of this IP (e.g: AIPSTZ5 on i.MX8MP) may be tied to a power domain and may lose their configuration when the domain is powered off. This is why the configuration has to be restored when the domain is powered on. Co-developed-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
||
![]() |
701aa9ad1e |
bus: mhi: host: Make local functions static
These functions were not used outside of the file defining them. So make them static as they should be. Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> Link: https://patch.msgid.link/20250617064906.14079-1-mani@kernel.org |
||
![]() |
41cb08555c |
treewide, timers: Rename from_timer() to timer_container_of()
Move this API to the canonical timer_*() namespace. [ tglx: Redone against pre rc1 ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com |
||
![]() |
c26f4fbd58 |
Char/Misc/IIO pull request for 6.16-rc1
Here is the big char/misc/iio and other small driver subsystem pull request for 6.16-rc1. Overall, a lot of individual changes, but nothing major, just the normal constant forward progress of new device support and cleanups to existing subsystems. Highlights in here are: - Large IIO driver updates and additions and device tree changes - Android binder bugfixes and logfile fixes - mhi driver updates - comedi driver updates - counter driver updates and additions - coresight driver updates and additions - echo driver removal as there are no in-kernel users of it - nvmem driver updates - spmi driver updates - new amd-sbi driver "subsystem" and drivers added - rust miscdriver binding documentation fix - other small driver fixes and updates (uio, w1, acrn, hpet, xillybus, cardreader drivers, fastrpc and others.) All of these have been in linux-next for quite a while with no reported problems. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaEKg5Q8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ykUyACgmAzrzKMoQUwwhQ6ed2l7tHdrlOcAoIORI1/x pNqQdrE1EbmAAyl47IN4 =ts6J -----END PGP SIGNATURE----- Merge tag 'char-misc-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc / iio driver updates from Greg KH: "Here is the big char/misc/iio and other small driver subsystem pull request for 6.16-rc1. Overall, a lot of individual changes, but nothing major, just the normal constant forward progress of new device support and cleanups to existing subsystems. Highlights in here are: - Large IIO driver updates and additions and device tree changes - Android binder bugfixes and logfile fixes - mhi driver updates - comedi driver updates - counter driver updates and additions - coresight driver updates and additions - echo driver removal as there are no in-kernel users of it - nvmem driver updates - spmi driver updates - new amd-sbi driver "subsystem" and drivers added - rust miscdriver binding documentation fix - other small driver fixes and updates (uio, w1, acrn, hpet, xillybus, cardreader drivers, fastrpc and others) All of these have been in linux-next for quite a while with no reported problems" * tag 'char-misc-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (390 commits) binder: fix yet another UAF in binder_devices counter: microchip-tcb-capture: Add watch validation support dt-bindings: iio: adc: Add ROHM BD79100G iio: adc: add support for Nuvoton NCT7201 dt-bindings: iio: adc: add NCT7201 ADCs iio: chemical: Add driver for SEN0322 dt-bindings: trivial-devices: Document SEN0322 iio: adc: ad7768-1: reorganize driver headers iio: bmp280: zero-init buffer iio: ssp_sensors: optimalize -> optimize HID: sensor-hub: Fix typo and improve documentation iio: admv1013: replace redundant ternary operator with just len iio: chemical: mhz19b: Fix error code in probe() iio: adc: at91-sama5d2: use IIO_DECLARE_BUFFER_WITH_TS iio: accel: sca3300: use IIO_DECLARE_BUFFER_WITH_TS iio: adc: ad7380: use IIO_DECLARE_DMA_BUFFER_WITH_TS iio: adc: ad4695: rename AD4695_MAX_VIN_CHANNELS iio: adc: ad4695: use IIO_DECLARE_DMA_BUFFER_WITH_TS iio: introduce IIO_DECLARE_BUFFER_WITH_TS macros iio: make IIO_DMA_MINALIGN minimum of 8 bytes ... |
||
![]() |
500af1defb |
ARM: soc updates for 6.16
The main update in size is the removal of the TI DaVinci DA830 SoC support. DA830 is similar to DA850, which remain supported, but only the reference board was ever supported, and we removed that one 3 years ago as it had never been converted to devicetree. There are some other cleanups for OMAP4 and a few boards using old GPIO interfaces. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmg532EACgkQmmx57+YA GNk1Wg/+LyNX9SX/OrHa0mIv8MpVd+JqJQccFRQ1M9Yt53xPbG+7iToQkRicMS6+ 1dUPypjt9dSh8dTxwZ4zMEZ/x6Pg8j5CxW74ye0s5ympq/EFCab07DTayZUmj0XL C2NDpCTec47uD8BjAf03wdsw34Qd5I9JIjWXoWo9o4MtUHenaMn86TCuCdWyclMi 8JZLnyW+D+K2u1LAmh43L9JidHYCd90N6gDKpcWL37FrEcJR+8AI8XLNWViyOEq2 ow7aj5KTtcmChslgxMtQcxOJ32g0u3RAUdf24OrptYA0RfYmxzscyWoTpCWYket6 H9xnrz+OHejabVRa484FeHSQRRRgwdNR8eAKNs/NQIf5SM/SWuQy8vQu9wJEA9gm 2iNF6c4vSl65xu/LwamlkIMBEM7XY+ABtkJ63LaLHQaQ2NB7Cc8OebQXRhUNS6Dm tdTdFz5aw+vN1r6zobQ3Lk4DpA0SUueTHOc9GYXdp0piKANWTUL/oYBEVR10gSto vtUOWHUeoeaTffqWTJvOXq9YsXOAk71bBHa+uqrYz2Q12zuohWfB82uPU4jgiWAK SaMCo27HKmTdEctzA0fSEfel26C4SephMmu7QiCtGgwCnR6F1nlztyjjYVzt5DtZ t9iXXIk8K5B7W7WARU8DnSQFHgc49SowbRhrV0EpC4j2grs8Ix0= =8hph -----END PGP SIGNATURE----- Merge tag 'soc-arm-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC updates from Arnd Bergmann: "The main update in size is the removal of the TI DaVinci DA830 SoC support. DA830 is similar to DA850, which remain supported, but only the reference board was ever supported, and we removed that one 3 years ago as it had never been converted to devicetree. There are some other cleanups for OMAP4 and a few boards using old GPIO interfaces" * tag 'soc-arm-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: s3c: stop including gpio.h ARM: dts: davinci: da850-evm: Increase fifo threshold ARM: OMAP2+: Fix l4ls clk domain handling in STANDBY ARM: broadcom: MAINTAINERS: Cover bcm2712 files bus: ti-sysc: PRUSS OCP configuration ARM: davinci: remove support for da830 ARM: omap: pmic-cpcap: do not mess around without CPCAP or OMAP4 ARM: omap2plus_defconfig: enable I2C devices of GTA04 ARM: s3c/gpio: use new line value setter callbacks ARM: scoop/gpio: use new line value setter callbacks ARM: sa1100/gpio: use new line value setter callbacks ARM: orion/gpio: use new line value setter callbacks |
||
![]() |
297d9111e9 |
soc: drivers for 6.16
Updates are across the usual driver subsystems with SoC specific drivers: - added soc specicific drivers for sophgo cv1800 and sg2044, qualcomm sm8750, and amlogic c3 and s4 chips. - cache controller updates for sifive chips, plus binding changes for other cache descriptions. - memory controller drivers for mediatek mt6893, stm32 and cleanups for a few more drivers - reset controller drivers for T-Head TH1502, Sophgo sg2044 and Renesas RZ/V2H(P) - SCMI firmware updates to better deal with buggy firmware, plus better support for Qualcomm X1E and NXP i.MX specific interfaces - a new platform driver for the crypto firmware on Cznic Turris Omnia/MOX - cleanups for the TEE firmware subsystem and amdtee driver - minor updates and fixes for freescale/nxp, qualcomm, google, aspeed, wondermedia, ti, nxp, renesas, hisilicon, mediatek, broadcom and samsung SoCs -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmg51FsACgkQmmx57+YA GNnJ0w//Y2OzxBE/Mek7n7d4ibrdlSF9SX8JbL2W++o8Mb3YEJwCtGyhD7OQVYn3 ZuaiY0aHi9PugoHYrfqT8Q6o0GgYrPMgWwHRH+cPvzRng1FKFObdPqpv2+xXdEcu zhMM0AkhQ3/kegXOydBWaDETSc9dc74RWegKAc2onxD51NkjbP1MJMOO+gdSnwGq +NeDe4omberJR/2He9K0XDxK0wtIsNVZ+CYXF0gQlGwmxkKcTgJQnUm6gqChYR9T KhZedI0f61XTk54LTX3OCcbMpdQHxl8l7qI25+HHnMaUuqUSNj+ZKm8YeboywkLW T8J0oS6Dyaiypv1oYrmtEPbtCniullSpfE7mrMljlljuLYMIWkFllSXAlC5EjjOG GkNcW0k13cRGZ0sBliWoorzXB5qQRkQhQn1KBPBA/n8fEuFFf+GTbmjE2Q+BixkN Jthhyk+PZbZIOid7Y7ecxTEs/RR8SLRmTYwWr/szVUW7WRp3NqWvyZl9X/nYylf8 aw3ugwcRCNKd4ba35y0XR0x8jy4wRQtlQqqxpkiJgREAmS9U9WBWH8bxSj3i5jGu nvMMtHmcDZ3gDGdUT6is7susOZLRuc8E7Y5dyn+NB4UoAxUDqRAn8ZGSNiOCcjQa 07vWhT4NTLEJeexm3gdfTU1sRtrIjas+qxNg8IpPvRyGOoefJ7w= =RhpA -----END PGP SIGNATURE----- Merge tag 'soc-drivers-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull SoC driver updates from Arnd Bergmann: "Updates are across the usual driver subsystems with SoC specific drivers: - added soc specicific drivers for sophgo cv1800 and sg2044, qualcomm sm8750, and amlogic c3 and s4 chips. - cache controller updates for sifive chips, plus binding changes for other cache descriptions. - memory controller drivers for mediatek mt6893, stm32 and cleanups for a few more drivers - reset controller drivers for T-Head TH1502, Sophgo sg2044 and Renesas RZ/V2H(P) - SCMI firmware updates to better deal with buggy firmware, plus better support for Qualcomm X1E and NXP i.MX specific interfaces - a new platform driver for the crypto firmware on Cznic Turris Omnia/MOX - cleanups for the TEE firmware subsystem and amdtee driver - minor updates and fixes for freescale/nxp, qualcomm, google, aspeed, wondermedia, ti, nxp, renesas, hisilicon, mediatek, broadcom and samsung SoCs" * tag 'soc-drivers-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (133 commits) soc: aspeed: Add NULL check in aspeed_lpc_enable_snoop() soc: aspeed: lpc: Fix impossible judgment condition ARM: aspeed: Don't select SRAM docs: firmware: qcom_scm: Fix kernel-doc warning soc: fsl: qe: Consolidate chained IRQ handler install/remove firmware: qcom: scm: Allow QSEECOM for HP EliteBook Ultra G1q dt-bindings: mfd: qcom,tcsr: Add compatible for ipq5018 dt-bindings: cache: add QiLai compatible to ax45mp memory: stm32_omm: Fix error handling in stm32_omm_disable_child() dt-bindings: cache: Convert marvell,tauros2-cache to DT schema dt-bindings: cache: Convert marvell,{feroceon,kirkwood}-cache to DT schema soc: samsung: exynos-pmu: enable CPU hotplug support for gs101 MAINTAINERS: Add google,gs101-pmu-intr-gen.yaml binding file dt-bindings: soc: samsung: exynos-pmu: gs101: add google,pmu-intr-gen phandle dt-bindings: soc: google: Add gs101-pmu-intr-gen binding documentation bus: fsl-mc: Use strscpy() instead of strscpy_pad() soc: fsl: qbman: Remove const from portal->cgrs allocation type bus: fsl_mc: Fix driver_managed_dma check bus: fsl-mc: increase MC_CMD_COMPLETION_TIMEOUT_MS value bus: fsl-mc: drop useless cleanup ... |
||
![]() |
5963edd98a |
FSL SOC Changes for 6.16:
- Various fixes and cleanups from Ioana on fsl-mc bus driver - Other misc fixes on fsl-mc bus driver - A build fix on DPAA2 driver - Some preparation work from Kees on qbman driver - Some cleanup on FSL qe interrupt driver init -----BEGIN PGP SIGNATURE----- iJIEABYKADoWIQQQ/+b4s5DeF6zCYyNoqS/rAbjdeAUCaChUGBwcY2hyaXN0b3Bo ZS5sZXJveUBjc2dyb3VwLmV1AAoJEGipL+sBuN14P8cBAIWy+9x5gfkg7ndHDYQk 4DKYVuAC2ox4HRgQr/lAAyRzAP9zhtL/r8xjSeomn0Uk/vGbzdRNqQo5/l3vbp5i Tj8KDw== =lpqg -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmgvCN8ACgkQmmx57+YA GNmAFQ//e6MoQofsMrBvJWDOD20puXPYRJze7w34lzloAjffsU5qPDC+ggLdMogI 9HLm+Fh0QUC7z8bfjTTGKMmE2nV0+apZE227orcvTzgSq/EV0VVPCEkPXmg+I3CK 7bjP6BoTTZCZg1sxesEVnPz82Z0kGqKBSoG73pGYCw4VAkOXkbi1fFSTDGmlz1lY F6Yc54J32mTFni2IKw65wO5l2NOTGPXMUMkdjITyMjQqo8fjPfmenkp73qjBLPc2 ansDK0ULiUtSNP+jTNDOxvRPHWowiKdUnK3SQwWPpngmhWUJyvtM+IhtsKpWyuPI g8i8xS+FI+hw5I0fd9vzbzlRzSyL0c0ryqcIuWyXnhS8O5h7gvgVqlSHamp0TrQ/ ps1yTbeI0hHmcGWOHhJeNTnPal6o2zOSGqWBGxzXJ+iooAEP12xNh1/yE/BPcs+c lE39Y93I9kNvP28UptbOU3Z8Xpf9kj1hSV7W8c6alYCUcbZsuPL7qtf0cP6um/j2 NtiRfCsIT+jvwgfsiVBJtA311qN3WGiJETMpAh5COm39SqBcaLWh9tUXNDx+pvjF FuO6w78E2BWofgEAq9jxg255CKCZD7mIq1590WY4ntviZw/tqHE/gMJP0c0jQr+3 58d+NY7vLjPoF0fZpkVwNyPc9Yp3oyH0XuEZvTNb9fvSGVdHdj8= =StL6 -----END PGP SIGNATURE----- Merge tag 'soc_fsl-6.16-1' of https://github.com/chleroy/linux into soc/drivers FSL SOC Changes for 6.16: - Various fixes and cleanups from Ioana on fsl-mc bus driver - Other misc fixes on fsl-mc bus driver - A build fix on DPAA2 driver - Some preparation work from Kees on qbman driver - Some cleanup on FSL qe interrupt driver init * tag 'soc_fsl-6.16-1' of https://github.com/chleroy/linux: soc: fsl: qe: Consolidate chained IRQ handler install/remove bus: fsl-mc: Use strscpy() instead of strscpy_pad() soc: fsl: qbman: Remove const from portal->cgrs allocation type bus: fsl_mc: Fix driver_managed_dma check bus: fsl-mc: increase MC_CMD_COMPLETION_TIMEOUT_MS value bus: fsl-mc: drop useless cleanup bus: fsl-mc: add the dprc_get_mem() command to the whitelist bus: fsl-mc: fix GET/SET_TAILDROP command ids bus: fsl-mc: do not add a device-link for the UAPI used DPMCP device bus: fsl-mc: fix double-free on mc_dev soc: fsl: Do not enable DPAA2_CONSOLE by default during compile testing Link: https://lore.kernel.org/r/9e5b3e8e-3280-4ff9-915b-9a8b934bac22@csgroup.eu Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
![]() |
d28b097790 |
MHI Host
======== - Fix conflict between MHI power up and SYSERR state transitions by issuing MHI reset only if the device is in SYSERR state while in SBL/PBL EEs. The device won't respond to reset if it is not in SYSERR state in SBL/PBL EEs. - Remove redundant call to pci_assign_resource() since PCI core calls this API internally. - Add Telit FN920C04 modem which is based on Qcom SDX35 chipset. -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEZ6VDKoFIy9ikWCeXVZ8R5v6RzvUFAmgkccoACgkQVZ8R5v6R zvVsEQf9GXTqSPGHK0VaoUKECp/3PDchVp3OTLmlJVwtPr4OZ+eWdGoVpoZqlZo5 NsOsL+9n1y65WKg25y4KDDPGhhInYxppM61MOIa6BCEMacYC9sLC2K8EqVExQxob JRcmymgWYXB7romLRj3CmQ83Y3lIdRxg/9rsfTzEWQA/Cnr6IyNtec21afFPynfK B1urgeR+7RBSzHqtP3zvBS+gu5BObq9ypDzu6+TPVIssTVioGh2XkstSGKPvPcpv hmdXVS55/AI7jIrhUnDh3D5KvO1HY2YD2DlIH6wZ845kYugkXyVp3xEdTol+2Ueh Tz00iM8f9FWMEBIREk+GduAcutXaXg== =T9jj -----END PGP SIGNATURE----- Merge tag 'mhi-for-v6.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mani/mhi into char-misc-next Manivannan writes: MHI Host ======== - Fix conflict between MHI power up and SYSERR state transitions by issuing MHI reset only if the device is in SYSERR state while in SBL/PBL EEs. The device won't respond to reset if it is not in SYSERR state in SBL/PBL EEs. - Remove redundant call to pci_assign_resource() since PCI core calls this API internally. - Add Telit FN920C04 modem which is based on Qcom SDX35 chipset. * tag 'mhi-for-v6.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mani/mhi: bus: mhi: host: pci_generic: Add Telit FN920C04 modem support bus: mhi: host: pci_generic: Remove redundant assign resource usage bus: mhi: host: Fix conflict between power_up and SYSERR |
||
![]() |
13c984392b |
bus: moxtet: Switch to irq_domain_create_simple()
irq_domain_add_simple() is going away as being obsolete now. Switch to the preferred irq_domain_create_simple(). That differs in the first parameter: It takes more generic struct fwnode_handle instead of struct device_node. Therefore, of_fwnode_handle() is added around the parameter. Note some of the users can likely use dev->fwnode directly instead of indirect of_fwnode_handle(dev->of_node). But dev->fwnode is not guaranteed to be set for all, so this has to be investigated on case to case basis (by people who can actually test with the HW). [ tglx: Fix up subject prefix ] Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/20250319092951.37667-16-jirislaby@kernel.org |
||
![]() |
6348f62ef7 |
bus: mhi: host: pci_generic: Add Telit FN920C04 modem support
Add SDX35 based modem Telit FN920C04. $ lspci -vv 01:00.0 Unassigned class [ff00]: Qualcomm Device 011a Subsystem: Device 1c5d:2020 Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://patch.msgid.link/20250401093458.2953872-1-dnlplm@gmail.com |
||
![]() |
ce7cc522e9 |
bus: mhi: host: pci_generic: Remove redundant assign resource usage
Avoid redundant usage of pci_assign_resource for BAR allocation. This is already taken care by PCI framework. Invocation of this API leads to unnecessary relocation of BAR space to a new memory address. Signed-off-by: Subramanian Ananthanarayanan <quic_skananth@quicinc.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com> Link: https://patch.msgid.link/20250416-remove_assin_resource-v1-1-e92dd361fa0a@quicinc.com |
||
![]() |
4d92e7c5cc |
bus: mhi: host: Fix conflict between power_up and SYSERR
When mhi_async_power_up() enables IRQs, it is possible that we could
receive a SYSERR notification from the device if the firmware has crashed
for some reason. Then the SYSERR notification queues a work item that
cannot execute until the pm_mutex is released by mhi_async_power_up().
So the SYSERR work item will be pending. If mhi_async_power_up() detects
the SYSERR, it will handle it. If the device is in PBL, then the PBL state
transition event will be queued, resulting in a work item after the
pending SYSERR work item. Once mhi_async_power_up() releases the pm_mutex,
the SYSERR work item can run. It will blindly attempt to reset the MHI
state machine, which is the recovery action for SYSERR. PBL/SBL are not
interrupt driven and will ignore the MHI Reset unless SYSERR is actively
advertised. This will cause the SYSERR work item to timeout waiting for
reset to be cleared, and will leave the host state in SYSERR processing.
The PBL transition work item will then run, and immediately fail because
SYSERR processing is not a valid state for PBL transition.
This leaves the device uninitialized.
This issue has a fairly unique signature in the kernel log:
mhi mhi3: Requested to power ON
Qualcomm Cloud AI 100 0000:36:00.0: Fatal error received from
device. Attempting to recover
mhi mhi3: Power on setup success
mhi mhi3: Device failed to exit MHI Reset state
mhi mhi3: Device MHI is not in valid state
We cannot remove the SYSERR handling from mhi_async_power_up() because the
device may be in the SYSERR state, but we missed the notification as the
irq was fired before irqs were enabled. We also can't queue the SYSERR work
item from mhi_async_power_up() if SYSERR is detected because that may
result in a duplicate work item, and cause the same issue since the
duplicate item will blindly issue MHI reset even if SYSERR is no longer
active.
Instead, add a check in the SYSERR work item to make sure that MHI reset is
only issued if the device is in SYSERR state for PBL or SBL EEs.
Fixes:
|
||
![]() |
61ddf5faa7 |
bus: fsl-mc: Use strscpy() instead of strscpy_pad()
Both destination buffers are already zero-initialized, making strscpy() sufficient for safely copying 'obj_type'. The additional NUL-padding performed by strscpy_pad() is unnecessary. If the destination buffer has a fixed length, strscpy() automatically determines its size using sizeof() when the argument is omitted. This makes the explicit size arguments unnecessary. No functional changes intended. Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Link: https://lore.kernel.org/r/20250429104149.66334-1-thorsten.blum@linux.dev Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> |
||
![]() |
152f33ee30 |
bus: fsl_mc: Fix driver_managed_dma check
Since it's not currently safe to take device_lock() in the IOMMU probe
path, that can race against really_probe() setting dev->driver before
attempting to bind. The race itself isn't so bad, since we're only
concerned with dereferencing dev->driver itself anyway, but sadly my
attempt to implement the check with minimal churn leads to a kind of
TOCTOU issue, where dev->driver becomes valid after to_fsl_mc_driver(NULL)
is already computed, and thus the check fails to work as intended.
Will and I both hit this with the platform bus, but the pattern here is
the same, so fix it for correctness too.
Reported-by: Will McVicker <willmcvicker@google.com>
Fixes:
|
||
![]() |
23d0601368 |
bus: fsl-mc: increase MC_CMD_COMPLETION_TIMEOUT_MS value
In case the MC firmware runs in debug mode with extensive prints pushed to the console, the current timeout of 500ms is not enough. Increase the timeout value so that we don't have any chance of wrongly assuming that the firmware is not responding when it's just taking more time. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Link: https://lore.kernel.org/r/20250408105814.2837951-7-ioana.ciornei@nxp.com Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> |
||
![]() |
a941bed23c |
bus: fsl-mc: drop useless cleanup
This cleanup is actually a no-op because the resources are freed when the device objects are removed from the allocator at driver remove time. Remove the fsl_mc_cleanup_all_resource_pools() function and its call site. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Link: https://lore.kernel.org/r/20250408105814.2837951-6-ioana.ciornei@nxp.com Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> |
||
![]() |
a8c17b9cbf |
bus: fsl-mc: add the dprc_get_mem() command to the whitelist
Add a new MC command to the list of accepted firmware commands. The DPRC_GET_MEM command can be used to gather information on the internal memory characteristics. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Link: https://lore.kernel.org/r/20250408105814.2837951-5-ioana.ciornei@nxp.com Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> |
||
![]() |
c78230ad34 |
bus: fsl-mc: fix GET/SET_TAILDROP command ids
Command ids for taildrop get/set can not pass the check when they are
using from the restool user space utility. Correct them according to the
user manual.
Fixes:
|
||
![]() |
dd7d8e012b |
bus: fsl-mc: do not add a device-link for the UAPI used DPMCP device
The fsl-mc bus associated to the root DPRC in a DPAA2 system exports a
device file for userspace access to the MC firmware. In case the DPRC's
local MC portal (DPMCP) is currently in use, a new DPMCP device is
allocated through the fsl_mc_portal_allocate() function.
In this case, the call to fsl_mc_portal_allocate() will fail with -EINVAL
when trying to add a device link between the root DPRC (consumer) and
the newly allocated DPMCP device (supplier). This is because the DPMCP
is a dependent of the DPRC device (the bus).
Fix this by not adding a device link in case the DPMCP is allocated for
the root DPRC's usage.
Fixes:
|
||
![]() |
d694bf8a9a |
bus: fsl-mc: fix double-free on mc_dev
The blamed commit tried to simplify how the deallocations are done but,
in the process, introduced a double-free on the mc_dev variable.
In case the MC device is a DPRC, a new mc_bus is allocated and the
mc_dev variable is just a reference to one of its fields. In this
circumstance, on the error path only the mc_bus should be freed.
This commit introduces back the following checkpatch warning which is a
false-positive.
WARNING: kfree(NULL) is safe and this check is probably not required
+ if (mc_bus)
+ kfree(mc_bus);
Fixes:
|
||
![]() |
beccb7d158 |
OMAP driver updates for v6.16
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEe4dGDhaSf6n1v/EMWTcYmtP7xmUFAmgg0Q0ACgkQWTcYmtP7 xmX2Wg/9Ert5DjDFUr/etujwU7QBkHJc6F8zxu29+0jEK2IVRLY9rselxFKA6naL STMnVTLfbpX+zpmvw8wZE4wgodQJrNeGGKMchpmEtaCgeHizipUK5GJymE1UnSzb RikfhvHox85U+wRajEAb2Z4UQzg7trzSPi6uicT92fOmYKPrAKZVnw+D3pPzA8bY CrapdWJVlIsQozxNmRsKFqmRrw1KSO6D6SnTmcSN03/oq46mrOe0sDcZx3vqR7f5 /Qt6DR0Yv5UjdWgWdG2k3Uo7hd8gXH/BN6GrTVdnFSC8fkQTXFrtIfEWKyWTExb5 Ac1ibgBHLnGwUzI724a96GXYHN7twHMqF1lCMBHGHYw5Z2GbkhCsM/8SOSKHoPq3 p+MRAQV3NI1jBFsNEX5no55y3KTIrGKDKGT5iPpmyAtikZdj6vOQRX00ol7jBUm+ XmSGwD39tX8J9hdIGq6Trn91wipsRNinqNp+hXSAsRgtYq9P6qR+TlgvqagFGQAI RYn8GEG8YsBXM7s2eDQSWsDnZ4O0a78OqOQh4vONGg7qHqAmhrmBL0EPN29kQR3h gaM/VJ2jCtjYzKjuI4H+UdZVt0HibmyGJ80eFoL85K0P+wFWUAlXD26xiXZAjZBB gfJL8t7riM1Tz+/RKwfIFa4JcFOFPMhf27YAARwNZDpBEgh8k0c= =sexH -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmghsB8ACgkQYKtH/8kJ UicK3RAAlOQEAyust+l2w6lbxU0c3suYeryFlIMuwXLLm7JmjeSRNBuW+3hYnK8l 3KDEXEwIjtqzJ1wgcxy0Zvqit3ryZc0VslTA82KNFFgai3LGtDluO2vPAWewgF7k ++5lRcxTi6QmlxSOJ7G7uPqyEXDq/tKJ6+j1trvxrnHKNAoanDOYUnPlJZIm7F4W VGDschXrN+XuooqybmsbtI9Q2RBhJLBnKem0zvElfxFXCYfji8h4h18bppUah3St GQfrBHxyjTvH6MLWJl+ZrxVV78G52zPiXexVatTsZT6fYFYcIXfk5UIHeCFpXcuy XubJrF1Ylq753Km96EXOyrIg5Kk+gnEyZr1OFSUAPcRBxF1ERSu2/T7AzL8eTMAM KKdq0oN0t1UaILkgMSgBz2qxnDS05njpeA19x8OU8SFr9CaVQKnsfKCqDCQdZBCA ehFdCPyyYjiykyqaL0z62yJN3gCE8fa8A54hffD8zDpFGL4LV/lCV8CgICmn1zDg tz6LK8Dvh9PNKkUApW0Esxo34CxYQy8pKPu4RsQN+ZDBPRF7c2D9EgZ2jCO43OSB /M8m7g8OaoOVOuN8arzTy4jJrL9TkH95a4Kbi6mEZlMiUxrvBAeP8j9t7vVZptjw qfczdfzqJ2VT/WVWlp/QI6I1d3AEqnbrmVkR9qwUP3vYhRIWqn4= =IZ77 -----END PGP SIGNATURE----- Merge tag 'omap-for-v6.16/drivers-signed' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap into soc/drivers OMAP driver updates for v6.16 * tag 'omap-for-v6.16/drivers-signed' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap: Revert "bus: ti-sysc: Probe for l4_wkup and l4_cfg interconnect devices first" Link: https://lore.kernel.org/r/7h5xi7rtix.fsf@baylibre.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
![]() |
7d25c4e237 |
bus: ti-sysc: PRUSS OCP configuration
Updates OCP master port configuration to enable memory access outside of the PRU-ICSS subsystem. This set of changes configures PRUSS_SYSCFG.STANDBY_INIT bit to enable the OCP master ports during resume sequence and disables the OCP master ports during suspend sequence (applicable only on SoCs using OCP interconnect like the OMAP family). Signed-off-by: Parvathi Pudi <parvathi@couthit.com> Reviewed-by: Andreas Kemnade <andreas@kemnade.info> Link: https://lore.kernel.org/r/20250407072134.1044797-2-parvathi@couthit.com [khilman: multi-line comment style cleanup] Signed-off-by: Kevin Hilman <khilman@baylibre.com> |
||
![]() |
6f18d174b7 |
bus: mhi: ep: Update read pointer only after buffer is written
Inside mhi_ep_ring_add_element, the read pointer (rd_offset) is updated
before the buffer is written, potentially causing race conditions where
the host sees an updated read pointer before the buffer is actually
written. Updating rd_offset prematurely can lead to the host accessing
an uninitialized or incomplete element, resulting in data corruption.
Invoke the buffer write before updating rd_offset to ensure the element
is fully written before signaling its availability.
Fixes:
|
||
![]() |
36305857b1 |
Revert "bus: ti-sysc: Probe for l4_wkup and l4_cfg interconnect devices first"
This reverts commit |
||
![]() |
29f526ed68 |
bus: brcmstb_gisb: use dev_groups to register attribute groups
Instead of manually adding attribute groups, set dev_groups pointer to have the driver core do it. Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com> Link: https://lore.kernel.org/r/20250224193730.2698894-1-ovidiu.panait.oss@gmail.com Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> |
||
![]() |
8fa7292fee |
treewide: Switch/rename to timer_delete[_sync]()
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree over and remove the historical wrapper inlines. Conversion was done with coccinelle plus manual fixups where necessary. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
![]() |
a05c6e6694 |
soc: drivers for 6.15, part 2
This is the promised follow-up to the soc drivers branch, adding minor updates to omap and freescale drivers. Most notably, Ioana Ciornei takes over maintenance of the DPAA bus driver used in some NXP (originally Freescale) chips. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmfv22EACgkQYKtH/8kJ UicOgBAAq+9CX/Fcvrzu4dHtNphY9JUkO2Jpzvuj9471Yo2E8UAvXFCOBa43gLHr wCAvH1qF/ID/6UhHDC5tH+dHz5HzRYiIatzwO0V65W6rPhIqSBnLbmO4YGnryRwA uOx/jd+tdgDJZCn1V0BrvWgYxPC7tE/tk8AJZiHaRG2awpXrRRjtu3WZCEI5+UF6 zoUOJoiesMm+ca9xbDJwhcgKPqnig+7XTHXtYF51JSyFSoxg1dDd9VJbZyq2eAtP 1Lsjwn+kQxywJruxAZFC0xEB3ormAGTchsecTUcf31hdtJfTGgJzanpZPKEX56gM kxd0pJ2OwjMDN076bUZXmL4yzaC9fK8ecITHS4BKcY4GTtuPTvvYbNMg87Ag0/tr i3rhZcYple973PM6fl1OztbEBJ2rGvUe10GZ+MTMEPUN24SA252zru55gdfLsIJp kTRQmkpGjcZ2ZqahqlkBZ7QNVP9/e4C4mbmflLtFfKBID2ON30YFVEy+d2D1AVkm 7EzSvb12ntEb1S+17w6FFmERN7zaDBXG1M3mjecyZ33sEKI92sM9L/AFYkrhWe9b JNi3h93FCK9CWQRULR2Yos7IHOIOeXVf3tXH4QXiH1mlRmZ9scCc75MqyhkbpR7H uU7Bq3bhiwhcYeDbkFcyu+rl/9YxgwgW0hujx/WLuJ54V54q2cI= =ENMh -----END PGP SIGNATURE----- Merge tag 'soc-drivers-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull more SoC driver updates from Arnd Bergmann: "This is the promised follow-up to the soc drivers branch, adding minor updates to omap and freescale drivers. Most notably, Ioana Ciornei takes over maintenance of the DPAA bus driver used in some NXP (originally Freescale) chips" * tag 'soc-drivers-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: bus: fsl-mc: Remove deadcode MAINTAINERS: add the linuppc-dev list to the fsl-mc bus entry MAINTAINERS: fix nonexistent dtbinding file name MAINTAINERS: add myself as maintainer for the fsl-mc bus irqdomain: soc: Switch to irq_find_mapping() Input: tsc2007 - accept standard properties |
||
![]() |
45c88e9e82 |
FSL SOC Changes for 6.15:
- irqdomain cleanups from Jiry - Add Ioana as Maintainer of fsl-mc bus and remove Laurentiu and Stuart - Remove deadcode from fsl-mc bus -----BEGIN PGP SIGNATURE----- iJIEABYKADoWIQQQ/+b4s5DeF6zCYyNoqS/rAbjdeAUCZ91HWxwcY2hyaXN0b3Bo ZS5sZXJveUBjc2dyb3VwLmV1AAoJEGipL+sBuN14CT4A/0Pi/m5rSAdYlvumCcBE XrnZaFJq8JeSc2DWWPxE3yQaAQCdTZNdXQK1wLgvsVc9eAsfnrLYreo+KX56wjvK c0+YAA== =y8a5 -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmfv0ngACgkQYKtH/8kJ UieGghAArmduNzS9N+FbRLkVUUga/JRWnrHmU2Rb6UAtIvCRFq63dlBacgl2enqw 0LvsFwtV55GKKb1bnvCOJb1M8Q1a4uJWfPZLLOucJ74UTRSdKhCxe6ZpuoqfwES3 uds0qqse0ps6F8dWZ5+V8DxcmdD+0/bkVB4DbgxOx8DMJUkvqEvLDKS6SlenbPxA 0NGejFeHidx1F0aFM3aRepViCJXywDQunSYQg8VyGv0Vzl+agGx+Jhicl0JsO8bs 2wHB2HspMydmnYBjBAtDy7uY7UTZX80jLOjFyOvHTVwMV1FY1KfC3a9JVQqFk92x tyYxTCZvuk6rFzNC7FUoJcQapKG5byI00xK0MD8bovdMPNOdbNApMqXvOz2XWcU1 kwoVE6stMKp4CQxdD51SVDa6n758ih5y+iFpslityr/XEYO7jdcUTfdcXwIllQeU kgABsdk2VJ49ZLAZ7qIfz6kdM/MwoV1+IaZGsER376HC5cLmybv2NyDhkNpHezuf 7+NYTCi4nqNwPpx8LQfjJh6JR/n5pq9uStMR33N9HmdP9mrcYyvov2ugUxBExC+c mhFlkmt+eJBlMxx04q+NJGJ+lpdq+fl0OmliUvGNfil8zleEe8m+xgrnDf3kljb4 bGoKqPfpx2ScW3ZRmjaPRuV7rg/MaXr0SHeyyk/Xxrgy7/WjJlU= =RBvv -----END PGP SIGNATURE----- Merge tag 'soc_fsl-6.15-1' of https://github.com/chleroy/linux into soc/drivers-2 FSL SOC Changes for 6.15: - irqdomain cleanups from Jiry - Add Ioana as Maintainer of fsl-mc bus and remove Laurentiu and Stuart - Remove deadcode from fsl-mc bus * tag 'soc_fsl-6.15-1' of https://github.com/chleroy/linux: bus: fsl-mc: Remove deadcode MAINTAINERS: add the linuppc-dev list to the fsl-mc bus entry MAINTAINERS: fix nonexistent dtbinding file name MAINTAINERS: add myself as maintainer for the fsl-mc bus irqdomain: soc: Switch to irq_find_mapping() |
||
![]() |
25601e8544 |
Char/Misc/IIO driver updates for 6.15-rc1
Here is the big set of char, misc, iio, and other smaller driver subsystems for 6.15-rc1. Lots of stuff in here, including: - loads of IIO changes and driver updates - counter driver updates - w1 driver updates - faux conversions for some drivers that were abusing the platform bus interface - coresight driver updates - rust miscdevice binding updates based on real-world-use - other minor driver updates All of these have been in linux-next with no reported issues for quite a while. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ+mNdQ8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ylktACfYJix41jCCDbiFjnu7Hz4OIdcrUsAnRyF164M 1n5MhEhsEmvQj7WBwQLE =AmmW -----END PGP SIGNATURE----- Merge tag 'char-misc-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc / IIO driver updates from Greg KH: "Here is the big set of char, misc, iio, and other smaller driver subsystems for 6.15-rc1. Lots of stuff in here, including: - loads of IIO changes and driver updates - counter driver updates - w1 driver updates - faux conversions for some drivers that were abusing the platform bus interface - coresight driver updates - rust miscdevice binding updates based on real-world-use - other minor driver updates All of these have been in linux-next with no reported issues for quite a while" * tag 'char-misc-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (292 commits) samples: rust_misc_device: fix markup in top-level docs Coresight: Fix a NULL vs IS_ERR() bug in probe misc: lis3lv02d: convert to use faux_device tlclk: convert to use faux_device regulator: dummy: convert to use the faux device interface bus: mhi: host: Fix race between unprepare and queue_buf coresight: configfs: Constify struct config_item_type doc: iio: ad7380: describe offload support iio: ad7380: add support for SPI offload iio: light: Add check for array bounds in veml6075_read_int_time_ms iio: adc: ti-ads7924 Drop unnecessary function parameters staging: iio: ad9834: Use devm_regulator_get_enable() staging: iio: ad9832: Use devm_regulator_get_enable() iio: gyro: bmg160_spi: add of_match_table dt-bindings: iio: adc: Add i.MX94 and i.MX95 support iio: adc: ad7768-1: remove unnecessary locking Documentation: ABI: add wideband filter type to sysfs-bus-iio iio: adc: ad7768-1: set MOSI idle state to prevent accidental reset iio: adc: ad7768-1: Fix conversion result sign iio: adc: ad7124: Benefit of dev = indio_dev->dev.parent in ad7124_parse_channel_config() ... |
||
![]() |
0c86b42439 |
drm for 6.15-rc1
uapi: - add mediatek tiled fourcc - add support for notifying userspace on device wedged new driver: - appletbdrm: support for Apple Touchbar displays on m1/m2 - nova-core: skeleton rust driver to develop nova inside off firmware: - add some rust firmware pieces rust: - add 'LocalModule' type alias component: - add helper to query bound status fbdev: - fbtft: remove access to page->index media: - cec: tda998x: import driver from drm dma-buf: - add fast path for single fence merging tests: - fix lockdep warnings atomic: - allow full modeset on connector changes - clarify semantics of allow_modeset and drm_atomic_helper_check - async-flip: support on arbitary planes - writeback: fix UAF - Document atomic-state history format-helper: - support ARGB8888 to ARGB4444 conversions buddy: - fix multi-root cleanup ci: - update IGT dp: - support extended wake timeout - mst: fix RAD to string conversion - increase DPCD eDP control CAP size to 5 bytes - add DPCD eDP v1.5 definition - add helpers for LTTPR transparent mode panic: - encode QR code according to Fido 2.2 scheduler: - add parameter struct for init - improve job peek/pop operations - optimise drm_sched_job struct layout ttm: - refactor pool allocation - add helpers for TTM shrinker panel-orientation: - add a bunch of new quirks panel: - convert panels to multi-style functions - edp: Add support for B140UAN04.4, BOE NV140FHM-NZ, CSW MNB601LS1-3, LG LP079QX1-SP0V, MNE007QS3-7, STA 116QHD024002, Starry 116KHD024006, Lenovo T14s Gen6 Snapdragon - himax-hx83102: Add support for CSOT PNA957QT1-1, Kingdisplay kd110n11-51ie, Starry 2082109qfh040022-50e - visionox-r66451: use multi-style MIPI-DSI functions - raydium-rm67200: Add driver for Raydium RM67200 - simple: Add support for BOE AV123Z7M-N17, BOE AV123Z7M-N17 - sony-td4353-jdi: Use MIPI-DSI multi-func interface - summit: Add driver for Apple Summit display panel - visionox-rm692e5: Add driver for Visionox RM692E5 bridge: - pass full atomic state to various callbacks - adv7511: Report correct capabilities - it6505: Fix HDCP V compare - snd65dsi86: fix device IDs - nwl-dsi: set bridge type - ti-sn65si83: add error recovery and set bridge type - synopsys: add HDMI audio support xe: - support device-wedged event - add mmap support for PCI memory barrier - perf pmu integration and expose per-engien activity - add EU stall sampling support - GPU SVM and Xe SVM implementation - use TTM shrinker - add survivability mode to allow the driver to do firmware updates in critical failure states - PXP HWDRM support for MTL and LNL - expose package/vram temps over hwmon - enable DP tunneling - drop mmio_ext abstraction - Reject BO evcition if BO is bound to current VM - Xe suballocator improvements - re-use display vmas when possible - add GuC Buffer Cache abstraction - PCI ID update for Panther Lake and Battlemage - Enable SRIOV for Panther Lake - Refactor VRAM manager location i915: - enable extends wake timeout - support device-wedged event - Enable DP 128b/132b SST DSC - FBC dirty rectangle support for display version 30+ - convert i915/xe to drm client setup - Compute HDMI PLLS for rates not in fixed tables - Allow DSB usage when PSR is enabled on LNL+ - Enable panel replay without full modeset - Enable async flips with compressed buffers on ICL+ - support luminance based brightness via DPCD for eDP - enable VRR enable/disable without full modeset - allow GuC SLPC default strategies on MTL+ for performance - lots of display refactoring in move to struct intel_display amdgpu: - add device wedged event - support async page flips on overlay planes - enable broadcast RGB drm property - add info ioctl for virt mode - OEM i2c support for RGB lights - GC 11.5.2 + 11.5.3 support - SDMA 6.1.3 support - NBIO 7.9.1 + 7.11.2 support - MMHUB 1.8.1 + 3.3.2 support - DCN 3.6.0 support - Add dynamic workload profile switching for GC 10-12 - support larger VBIOS sizes - Mark gttsize parameters as deprecated - Initial JPEG queue resset support amdkfd: - add KFD per process flags for setting precision - sync pasid values between KGD and KFD - improve GTT/VRAM handling for APUs - fix user queue validation on GC7/8 - SDMA queue reset support raedeon: - rs400 hyperz fix i2c: - td998x: drop platform_data, split driver into media and bridge ast: - transmitter chip detection refactoring - vbios display mode refactoring - astdp: fix connection status and filter unsupported modes - cursor handling refactoring imagination: - check job dependencies with sched helper ivpu: - improve command queue handling - use workqueue for IRQ handling - add support HW fault injection - locking fixes mgag200: - add support for G200eH5 msm: - dpu: add concurrent writeback support for DPU 10.x+ - use LTTPR helpers - GPU: - Fix obscure GMU suspend failure - Expose syncobj timeline support - Extend GPU devcoredump with pagetable info - a623 support - Fix a6xx gen1/gen2 indexed-register blocks in gpu snapshot / devcoredump - Display: - Add cpu-cfg interconnect paths on SM8560 and SM8650 - Introduce KMS OMMU fault handler, causing devcoredump snapshot - Fixed error pointer dereference in msm_kms_init_aspace() - DPU: - Fix mode_changing handling - Add writeback support on SM6150 (QCS615) - Fix DSC programming in 1:1:1 topology - Reworked hardware resource allocation, moving it to the CRTC code - Enabled support for Concurrent WriteBack (CWB) on SM8650 - Enabled CDM blocks on all relevant platforms - Reworked debugfs interface for BW/clocks debugging - Clear perf params before calculating bw - Support YUV formats on writeback - Fixed double inclusion - Fixed writeback in YUV formats when using cloned output, Dropped wb2_formats_rgb - Corrected dpu_crtc_check_mode_changed and struct dpu_encoder_virt kerneldocs - Fixed uninitialized variable in dpu_crtc_kickoff_clone_mode() - DSI: - DSC-related fixes - Rework clock programming - DSI PHY: - Fix 7nm (and lower) PHY programming - Add proper DT schema definitions for DSI PHY clocks - HDMI: - Rework the driver, enabling the use of the HDMI Connector framework - Bindings: - Added eDP PHY on SA8775P nouveau: - move drm_slave_encoder interface into driver - nvkm: refactor GSP RPC - use LTTPR helpers mediatek: - HDMI fixup and refinement - add MT8188 dsc compatible - MT8365 SoC support panthor: - Expose sizes of intenral BOs via fdinfo - Fix race between reset and suspend - Improve locking qaic: - Add support for AIC200 renesas: - Fix limits in DT bindings rockchip: - support rk3562-mali - rk3576: Add HDMI support - vop2: Add new display modes on RK3588 HDMI0 up to 4K - Don't change HDMI reference clock rate - Fix DT bindings - analogix_dp: add eDP support - fix shutodnw solomon: - Set SPI device table to silence warnings - Fix pixel and scanline encoding v3d: - handle clock vc4: - Use drm_exec - Use dma-resv for wait-BO ioctl - Remove seqno infrastructure virtgpu: - Support partial mappings of GEM objects - Reserve VGA resources during initialization - Fix UAF in virtgpu_dma_buf_free_obj() - Add panic support vkms: - Switch to a managed modesetting pipeline - Add support for ARGB8888 - fix UAf xlnx: - Set correct DMA segment size - use mutex guards - Fix error handling - Fix docs -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmfmA2cACgkQDHTzWXnE hr7lKQ/+I7gmln3ka8FyKnpwG5KusDpxz3OzgUKHpzOTkXL1+vPMt0vjCKRJKE3D zfpUTWNbwlVN0krqmUGyFIeCt8wmevBF6HvQ+GsWbiWltUj3xIlnkV0TVH84XTUo 0evrXNG9K8sLjMKjrf7yrGL53Ayoaq9IO9wtOws+FCgtykAsMR/IWLrYLpj21ZQ6 Oclhq5Cz21WRoQpzySR23s3DLi4LHri26RGKbGNh2PzxYwyP/euGW6O+ncEduNmg vQLgUfptaM/EubJFG6jxDWZJ2ChIAUUxQuhZwt7DKqRsYIcJKcfDSUzqL95t6SYU zewlYmeslvusoesCeTJzHaUj34yqJGsvjFPsHFUEvAy8BVncsqS40D6mhrRMo5nD chnSJu+IpDOEEqcdbb1J73zKLw6X3GROM8qUQEThJBD2yTsOdw9d0HXekMDMBXSi NayKvXfsBV19rI74FYnRCzHt8BVVANh5qJNnR5RcnPZ2KzHQbV0JFOA9YhxE8vFU GWkFWKlpAQUQ+yoTy1kuO9dcUxLIC7QseMeS5BYhcJBMEV78xQuRYRxgsL8YS4Yg rIhcb3mZwMFj7jBAqfpLKWiI+GTup+P9vcz7Bvm5iIf8gEhZLUTwqBeAYXQkcWd4 i1AqDuFR0//sAgODoeU2sg1Q3yTL/i/DhcwvCIPgcDZ/x4Eg868= =oK/N -----END PGP SIGNATURE----- Merge tag 'drm-next-2025-03-28' of https://gitlab.freedesktop.org/drm/kernel Pull drm updates from Dave Airlie: "Outside of drm there are some rust patches from Danilo who maintains that area in here, and some pieces for drm header check tests. The major things in here are a new driver supporting the touchbar displays on M1/M2, the nova-core stub driver which is just the vehicle for adding rust abstractions and start developing a real driver inside of. xe adds support for SVM with a non-driver specific SVM core abstraction that will hopefully be useful for other drivers, along with support for shrinking for TTM devices. I'm sure xe and AMD support new devices, but the pipeline depth on these things is hard to know what they end up being in the marketplace! uapi: - add mediatek tiled fourcc - add support for notifying userspace on device wedged new driver: - appletbdrm: support for Apple Touchbar displays on m1/m2 - nova-core: skeleton rust driver to develop nova inside off firmware: - add some rust firmware pieces rust: - add 'LocalModule' type alias component: - add helper to query bound status fbdev: - fbtft: remove access to page->index media: - cec: tda998x: import driver from drm dma-buf: - add fast path for single fence merging tests: - fix lockdep warnings atomic: - allow full modeset on connector changes - clarify semantics of allow_modeset and drm_atomic_helper_check - async-flip: support on arbitary planes - writeback: fix UAF - Document atomic-state history format-helper: - support ARGB8888 to ARGB4444 conversions buddy: - fix multi-root cleanup ci: - update IGT dp: - support extended wake timeout - mst: fix RAD to string conversion - increase DPCD eDP control CAP size to 5 bytes - add DPCD eDP v1.5 definition - add helpers for LTTPR transparent mode panic: - encode QR code according to Fido 2.2 scheduler: - add parameter struct for init - improve job peek/pop operations - optimise drm_sched_job struct layout ttm: - refactor pool allocation - add helpers for TTM shrinker panel-orientation: - add a bunch of new quirks panel: - convert panels to multi-style functions - edp: Add support for B140UAN04.4, BOE NV140FHM-NZ, CSW MNB601LS1-3, LG LP079QX1-SP0V, MNE007QS3-7, STA 116QHD024002, Starry 116KHD024006, Lenovo T14s Gen6 Snapdragon - himax-hx83102: Add support for CSOT PNA957QT1-1, Kingdisplay kd110n11-51ie, Starry 2082109qfh040022-50e - visionox-r66451: use multi-style MIPI-DSI functions - raydium-rm67200: Add driver for Raydium RM67200 - simple: Add support for BOE AV123Z7M-N17, BOE AV123Z7M-N17 - sony-td4353-jdi: Use MIPI-DSI multi-func interface - summit: Add driver for Apple Summit display panel - visionox-rm692e5: Add driver for Visionox RM692E5 bridge: - pass full atomic state to various callbacks - adv7511: Report correct capabilities - it6505: Fix HDCP V compare - snd65dsi86: fix device IDs - nwl-dsi: set bridge type - ti-sn65si83: add error recovery and set bridge type - synopsys: add HDMI audio support xe: - support device-wedged event - add mmap support for PCI memory barrier - perf pmu integration and expose per-engien activity - add EU stall sampling support - GPU SVM and Xe SVM implementation - use TTM shrinker - add survivability mode to allow the driver to do firmware updates in critical failure states - PXP HWDRM support for MTL and LNL - expose package/vram temps over hwmon - enable DP tunneling - drop mmio_ext abstraction - Reject BO evcition if BO is bound to current VM - Xe suballocator improvements - re-use display vmas when possible - add GuC Buffer Cache abstraction - PCI ID update for Panther Lake and Battlemage - Enable SRIOV for Panther Lake - Refactor VRAM manager location i915: - enable extends wake timeout - support device-wedged event - Enable DP 128b/132b SST DSC - FBC dirty rectangle support for display version 30+ - convert i915/xe to drm client setup - Compute HDMI PLLS for rates not in fixed tables - Allow DSB usage when PSR is enabled on LNL+ - Enable panel replay without full modeset - Enable async flips with compressed buffers on ICL+ - support luminance based brightness via DPCD for eDP - enable VRR enable/disable without full modeset - allow GuC SLPC default strategies on MTL+ for performance - lots of display refactoring in move to struct intel_display amdgpu: - add device wedged event - support async page flips on overlay planes - enable broadcast RGB drm property - add info ioctl for virt mode - OEM i2c support for RGB lights - GC 11.5.2 + 11.5.3 support - SDMA 6.1.3 support - NBIO 7.9.1 + 7.11.2 support - MMHUB 1.8.1 + 3.3.2 support - DCN 3.6.0 support - Add dynamic workload profile switching for GC 10-12 - support larger VBIOS sizes - Mark gttsize parameters as deprecated - Initial JPEG queue resset support amdkfd: - add KFD per process flags for setting precision - sync pasid values between KGD and KFD - improve GTT/VRAM handling for APUs - fix user queue validation on GC7/8 - SDMA queue reset support raedeon: - rs400 hyperz fix i2c: - td998x: drop platform_data, split driver into media and bridge ast: - transmitter chip detection refactoring - vbios display mode refactoring - astdp: fix connection status and filter unsupported modes - cursor handling refactoring imagination: - check job dependencies with sched helper ivpu: - improve command queue handling - use workqueue for IRQ handling - add support HW fault injection - locking fixes mgag200: - add support for G200eH5 msm: - dpu: add concurrent writeback support for DPU 10.x+ - use LTTPR helpers - GPU: - Fix obscure GMU suspend failure - Expose syncobj timeline support - Extend GPU devcoredump with pagetable info - a623 support - Fix a6xx gen1/gen2 indexed-register blocks in gpu snapshot / devcoredump - Display: - Add cpu-cfg interconnect paths on SM8560 and SM8650 - Introduce KMS OMMU fault handler, causing devcoredump snapshot - Fixed error pointer dereference in msm_kms_init_aspace() - DPU: - Fix mode_changing handling - Add writeback support on SM6150 (QCS615) - Fix DSC programming in 1:1:1 topology - Reworked hardware resource allocation, moving it to the CRTC code - Enabled support for Concurrent WriteBack (CWB) on SM8650 - Enabled CDM blocks on all relevant platforms - Reworked debugfs interface for BW/clocks debugging - Clear perf params before calculating bw - Support YUV formats on writeback - Fixed double inclusion - Fixed writeback in YUV formats when using cloned output, Dropped wb2_formats_rgb - Corrected dpu_crtc_check_mode_changed and struct dpu_encoder_virt kerneldocs - Fixed uninitialized variable in dpu_crtc_kickoff_clone_mode() - DSI: - DSC-related fixes - Rework clock programming - DSI PHY: - Fix 7nm (and lower) PHY programming - Add proper DT schema definitions for DSI PHY clocks - HDMI: - Rework the driver, enabling the use of the HDMI Connector framework - Bindings: - Added eDP PHY on SA8775P nouveau: - move drm_slave_encoder interface into driver - nvkm: refactor GSP RPC - use LTTPR helpers mediatek: - HDMI fixup and refinement - add MT8188 dsc compatible - MT8365 SoC support panthor: - Expose sizes of intenral BOs via fdinfo - Fix race between reset and suspend - Improve locking qaic: - Add support for AIC200 renesas: - Fix limits in DT bindings rockchip: - support rk3562-mali - rk3576: Add HDMI support - vop2: Add new display modes on RK3588 HDMI0 up to 4K - Don't change HDMI reference clock rate - Fix DT bindings - analogix_dp: add eDP support - fix shutodnw solomon: - Set SPI device table to silence warnings - Fix pixel and scanline encoding v3d: - handle clock vc4: - Use drm_exec - Use dma-resv for wait-BO ioctl - Remove seqno infrastructure virtgpu: - Support partial mappings of GEM objects - Reserve VGA resources during initialization - Fix UAF in virtgpu_dma_buf_free_obj() - Add panic support vkms: - Switch to a managed modesetting pipeline - Add support for ARGB8888 - fix UAf xlnx: - Set correct DMA segment size - use mutex guards - Fix error handling - Fix docs" * tag 'drm-next-2025-03-28' of https://gitlab.freedesktop.org/drm/kernel: (1762 commits) drm/amd/pm: Update feature list for smu_v13_0_6 drm/amdgpu: Add parameter documentation for amdgpu_sync_fence drm/amdgpu/discovery: optionally use fw based ip discovery drm/amdgpu/discovery: use specific ip_discovery.bin for legacy asics drm/amdgpu/discovery: check ip_discovery fw file available drm/amd/pm: Remove unnecessay UQ10 to UINT conversion drm/amd/pm: Remove unnecessay UQ10 to UINT conversion drm/amdgpu/sdma_v4_4_2: update VM flush implementation for SDMA drm/amdgpu: Optimize VM invalidation engine allocation and synchronize GPU TLB flush drm/amd/amdgpu: Increase max rings to enable SDMA page ring drm/amdgpu: Decode deferred error type in gfx aca bank parser drm/amdgpu/gfx11: Add Cleaner Shader Support for GFX11.5 GPUs drm/amdgpu/mes: clean up SDMA HQD loop drm/amdgpu/mes: enable compute pipes across all MEC drm/amdgpu/mes: drop MES 10.x leftovers drm/amdgpu/mes: optimize compute loop handling drm/amdgpu/sdma: guilty tracking is per instance drm/amdgpu/sdma: fix engine reset handling drm/amdgpu: remove invalid usage of sched.ready drm/amdgpu: add cleaner shader trace point ... |
||
![]() |
a9fc230497 |
soc: driver updates for 6.15, part 1
These are the updates for SoC specific drivers and related subsystems: - Firmware driver updates for SCMI, FF-A and SMCCC firmware interfaces, adding support for additional firmware features including SoC identification and FF-A SRI callbacks as well as various bugfixes - Memory controller updates for Nvidia and Mediatek - Reset controller support for microchip sam9x7 and imx8qxp/imx8qm - New hardware support for multiple Mediatek, Renesas and Samsung Exynos chips - Minor updates on Zynq, Qualcomm, Amlogic, TI, Samsung, Nvidia and Apple chips There will be a follow up with a few more driver updates that are still causing build regressions at the moment. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmfkIIkACgkQYKtH/8kJ UifSJg//cnhEFErOIMxWeNcnNBKY2ly7VXRBwCU10jXXri16VMIz601vEb8du+qU Wyoi2LlTeXx6cKkfsPEYgbbpo9iOHli0y8RHpQe2LwfCfSNK4ToXtL+aYPgLJQD8 4jdEv/QLnPnHsRp9+XW4HND9ZCV7N5CFaqozFe6BLWSczW4OYkUSXVfNN2VUDb8F cYy4+bRpZ1MQ6cmSCFXMJJ9BT/aBb4o0WGgr9jKe5p4YgDFjaw7a6sinVqBmoyoi bVNbEVSYrOFF03CoSpA+oRblE+lWQneWUHwUaXMPIcfScsbJ/5j2r1jjBhYauiTv memmeZJBg4w+gTlLVRlV66dhmRcwQhIOId2Or3yvnOoohnEZbV4KMR0P/cblfVvl 0TV4uRJh3uKoHYXpDIw3URz68a6ceW86JUx7kfBU+gVhDKKve3YowozFs8DTsE5s xUlhXarEnimFlicslckl0vsFudwk8ovoFe0ahdBk1KZ0wBMtbBWdrQMECkWF0PlG 8D4CilSq78jE9vTpSN7aEZB+xcLGUhYfusCJe2Wut6ZEATVUB9RSLHkgSPG44an2 szJwm2oI7uVIfj7VhaSglK1JpCXQJPycGC4Y6D2DO1QDjb7UveCs3s2DbMx78G/r Rj5NpQh8vZjTozE3nQhvC0dPglrpo4OipsyOlVl2ZMm5u4C5e4s= =QcjY -----END PGP SIGNATURE----- Merge tag 'soc-drivers-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull SoC driver updates from Arnd Bergmann: "These are the updates for SoC specific drivers and related subsystems: - Firmware driver updates for SCMI, FF-A and SMCCC firmware interfaces, adding support for additional firmware features including SoC identification and FF-A SRI callbacks as well as various bugfixes - Memory controller updates for Nvidia and Mediatek - Reset controller support for microchip sam9x7 and imx8qxp/imx8qm - New hardware support for multiple Mediatek, Renesas and Samsung Exynos chips - Minor updates on Zynq, Qualcomm, Amlogic, TI, Samsung, Nvidia and Apple chips There will be a follow up with a few more driver updates that are still causing build regressions at the moment" * tag 'soc-drivers-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (97 commits) irqchip: Add support for Amlogic A4 and A5 SoCs dt-bindings: interrupt-controller: Add support for Amlogic A4 and A5 SoCs reset: imx: fix incorrect module device table dt-bindings: power: qcom,kpss-acc-v2: add qcom,msm8916-acc compatible bus: qcom-ssc-block-bus: Fix the error handling path of qcom_ssc_block_bus_probe() bus: qcom-ssc-block-bus: Remove some duplicated iounmap() calls soc: qcom: pd-mapper: Add support for SDM630/636 reset: imx: Add SCU reset driver for i.MX8QXP and i.MX8QM dt-bindings: firmware: imx: add property reset-controller dt-bindings: reset: atmel,at91sam9260-reset: add sam9x7 memory: mtk-smi: Add ostd setting for mt8192 dt-bindings: soc: samsung: exynos-usi: Drop unnecessary status from example firmware: tegra: bpmp: Fix typo in bpmp-abi.h soc/tegra: pmc: Use str_enable_disable-like helpers soc: samsung: include linux/array_size.h where needed firmware: arm_scmi: use ioread64() instead of ioread64_hi_lo() soc: mediatek: mtk-socinfo: Add extra entry for MT8395AV/ZA Genio 1200 soc: mediatek: mt8188-mmsys: Add support for DSC on VDO0 soc: mediatek: mmsys: Migrate all tables to MMSYS_ROUTE() macro soc: mediatek: mt8365-mmsys: Fix routing table masks and values ... |
||
![]() |
c25951eb75 |
bus: fsl-mc: Remove deadcode
fsl_mc_allocator_driver_exit() was added explicitly by commit |
||
![]() |
22df63a23a | Merge branches 'apple/dart', 'arm/smmu/updates', 'arm/smmu/bindings', 'rockchip', 's390', 'core', 'intel/vt-d' and 'amd/amd-vi' into next | ||
![]() |
7a85394813 |
More Qualcomm driver updates for v6.15
Introduce Devicetree binding for providing board-specific firmware-name for the GENI serial engine block. Add SDM630/636 support in pd-mapper. Clean up and fix error handling in the SSC block bus driver. Add missing msm8916-acc compatible to resolve a number of Devicetree validation errors. -----BEGIN PGP SIGNATURE----- iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmfa04sVHGFuZGVyc3Nv bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3FVXcQAIpzeRpJw0eBo9oFhM3mFu46E54V l0NHseV2NKE55t/arwYvNqC/fLSp5M7g8uOLSq3icBAUkm0xuzmk147QPqzsOLOc yxqE+GpGFU7iBFPe1HNDHRAdMbeRa6EZJjqhioXdISdBneFpgMk4gnyT+qrMonvz MkSATkrZdZpG5urdxxUkx6R5Mcha/+Dm5a/9PuWJntC+nS4xrEnysKitOiXWnEJu K44HVYFQp+fHFThGq3Nf//5eXp0aXKaVcyvCVB9q8+sbghpbhfDtlfN0d1R6hqB7 +dND+gih4shdMcOaQTuJlEk5BJxPvY9Ck/gDdXah4IWexI96ELMhor2EzKWQdeHH tCIpyE7OTZ123zbjzPsO/aps6owTaFtMIm5HHSz1h0eyboye9bceog6x572Z9uhM rSb1e+NWDQqbAdDIsVVnTSTXRTIwxOnaDsUmucF4/DgAotZBi7QdohBNhpmGhQyV dzPcgtjtxVHgmx/Q0Fd7ND3uGr0aQe4cuzxZPsCRI+JBTdMU/+Ru82Y7i8Zselbb lEippsTiG93n0Id9nxrINnnY4j+51CnH5s0d1n9gt91Y/+7RDkgNlXrt95uS1Mj1 tYiyuIJ2PJxcC1EmLwqL1PyVDaPh5ahHCQCTKZEeF+FAfMjBw1S9XKf4Mfmv2TTM OgK2ff9AfSqxjHAs =L0ts -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmfbPWQACgkQYKtH/8kJ UicNGBAArVLfm+j6kHTj0ZltT88HjkhPEaq1Ldxnli9e4s8s7Rs79HHHGIpXcdYi FMPxbN4hw0rbHxCM2VNngNDM7MIA1LTsRchVGfIKsDnqr+DS34CRyPWz+cm719s3 zk62jRCoQq5y50pJYFUPLvNSdixSFkne3Z25vfRqW1qudn/kfZX3DXOKFr7Tso22 hM+/DQa1SNybM3YXMt7++RUjm2WCfsTymhlsT3ptwjFNljePI/CTAnllsMo9U9tw EuKFxCDJ5tlHtlB2p8hCj8GloSvkKQvypl/oOoaW4G/OSocoBILrKiJgNNUo8R9g ykaaTHXDVg6HB6UUNXvtY5EvcUk0kLUmmOqISZIV5IOpB3zx2cIs27z7FiJCQnec c8zjaAEfKzp4yBDN8cz2NurooNB4Igg5QOdYzlRAwrydmo9GNp1BWQ/iTFqijfDH 4I+Uq7NMyIBHYEZNt/dXHcZoeMA4KLueRmvraKTJf7+wfJfONzeK0LZkkyFfWErU y+4gHjRPO3rrYcbJUqLq2ibWaDVQXj3HA1187/Rimv4OBt2S/P0/Dq8dyQDoA9UV GspS576TZEkfIpDvePIaj4laSfOYwCyRc3ppKjcs9W80BcBla6kUMfmgAEFPIyLy 1E8ptLwqZ64CwQ39RDhBcGDAi6vCsPgJ8z5F3TEpZ0xjDpy/Ru0= =2s7I -----END PGP SIGNATURE----- Merge tag 'qcom-drivers-for-6.15-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers More Qualcomm driver updates for v6.15 Introduce Devicetree binding for providing board-specific firmware-name for the GENI serial engine block. Add SDM630/636 support in pd-mapper. Clean up and fix error handling in the SSC block bus driver. Add missing msm8916-acc compatible to resolve a number of Devicetree validation errors. * tag 'qcom-drivers-for-6.15-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: dt-bindings: power: qcom,kpss-acc-v2: add qcom,msm8916-acc compatible bus: qcom-ssc-block-bus: Fix the error handling path of qcom_ssc_block_bus_probe() bus: qcom-ssc-block-bus: Remove some duplicated iounmap() calls soc: qcom: pd-mapper: Add support for SDM630/636 dt-bindings: qcom: geni-se: Add 'firmware-name' property for firmware loading Link: https://lore.kernel.org/r/20250319142448.2279164-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
![]() |
124bb4e757 |
MHI Host
======== - Remove unused mhi_device_get() and mhi_queue_dma() APIs. - Add support for SA8775p MHI endpoint device with IP_SW0 channel. - Fix the race between mhi_unprepare_from_transfer() and mhi_queue_buf(). -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEZ6VDKoFIy9ikWCeXVZ8R5v6RzvUFAmfTxYsACgkQVZ8R5v6R zvUewgf/TYKTmhzkeV4KVJ8CLqVw2Ha1HJTJ/zYf2JmcfgapGW8fMktPSE/q38vJ 4p/GhrY+4eLAoFdMF5Utmo6xGSvvf81sPu7DYXNA1J1VQa7D5eHx4uKiwp9ctngE vNNRZKEkdq7mo9Lz5opUNs/bDmll8KMjgUumGl3BIF6HUV6kZGC1Qhuc6ovfxAkP CpCO7AvgUeIoE3Iw+kjuOlp5tcPxdvYMyGibs1m+FlxOnYQQrj9lUyVamVHaDJX3 m9xVFj+sK0k+xdcyG3+mBISpSI1aen3pezpqkpoUfOfZVF7A68jXr+ba/1wdmz1b ydqa/aXTy1rXva/u+felsoj6SujjwA== =p40V -----END PGP SIGNATURE----- Merge tag 'mhi-for-v6.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mani/mhi into char-misc-next Manivannan writes: MHI Host ======== - Remove unused mhi_device_get() and mhi_queue_dma() APIs. - Add support for SA8775p MHI endpoint device with IP_SW0 channel. - Fix the race between mhi_unprepare_from_transfer() and mhi_queue_buf(). * tag 'mhi-for-v6.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mani/mhi: bus: mhi: host: Fix race between unprepare and queue_buf bus: mhi: host: pci_generic: Add support for SA8775P endpoint bus: mhi: host: Remove unused functions |