The SCO packets from Bluetooth raw socket are now rejected because
hci_conn_num is left 0. This patch allows such the usecase to enable
the userspace SCO support.
Fixes: b16b327edb ("Bluetooth: btusb: add sysfs attribute to control USB alt setting")
Signed-off-by: Hsin-chen Chuang <chharry@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
On HCI_OP_RESET command, firmware raises alive interrupt. Driver needs
to wait for this before sending other command. This patch fixes the potential
miss of alive interrupt due to which HCI_OP_RESET can timeout.
Expected flow:
If tx command is HCI_OP_RESET,
1. set data->gp0_received = false
2. send HCI_OP_RESET
3. wait for alive interrupt
Actual flow having potential race:
If tx command is HCI_OP_RESET,
1. send HCI_OP_RESET
1a. Firmware raises alive interrupt here and in ISR
data->gp0_received is set to true
2. set data->gp0_received = false
3. wait for alive interrupt
Signed-off-by: Kiran K <kiran.k@intel.com>
Fixes: 05c200c8f0 ("Bluetooth: btintel_pcie: Add handshake between driver and firmware")
Reported-by: Bjorn Helgaas <helgaas@kernel.org>
Closes: https://patchwork.kernel.org/project/bluetooth/patch/20241001104451.626964-1-kiran.k@intel.com/
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes a regression caused by previous commit for fixing truncated
ACL data, which is causing some intermittent glitches when running two
A2DP streams.
serdev_device_write_buf() is the root cause of the glitch, which is
reverted, and the TX work will continue to write until the queue is empty.
This change fixes both issues. No A2DP streaming glitches or truncated
ACL data issue observed.
Fixes: 8023dd2204 ("Bluetooth: btnxpuart: Fix driver sending truncated data")
Fixes: 689ca16e52 ("Bluetooth: NXP: Add protocol support for NXP Bluetooth chipsets")
Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The function enters infinite recursion if the HCI device doesn't support
GPIO reset: btusb_reset -> hdev->reset -> vendor_reset -> btusb_reset...
btusb_reset shouldn't call hdev->reset after commit f07d478090
("Bluetooth: Get rid of cmd_timeout and use the reset callback")
Fixes: f07d478090 ("Bluetooth: Get rid of cmd_timeout and use the reset callback")
Signed-off-by: Hsin-chen Chuang <chharry@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The documentation for usb_driver_claim_interface() says that "the
device lock" is needed when the function is called from places other
than probe(). This appears to be the lock for the USB interface
device. The Mediatek btusb code gets called via this path:
Workqueue: hci0 hci_power_on [bluetooth]
Call trace:
usb_driver_claim_interface
btusb_mtk_claim_iso_intf
btusb_mtk_setup
hci_dev_open_sync
hci_power_on
process_scheduled_works
worker_thread
kthread
With the above call trace the device lock hasn't been claimed. Claim
it.
Without this fix, we'd sometimes see the error "Failed to claim iso
interface". Sometimes we'd even see worse errors, like a NULL pointer
dereference (where `intf->dev.driver` was NULL) with a trace like:
Call trace:
usb_suspend_both
usb_runtime_suspend
__rpm_callback
rpm_suspend
pm_runtime_work
process_scheduled_works
Both errors appear to be fixed with the proper locking.
Fixes: ceac1cb025 ("Bluetooth: btusb: mediatek: add ISO data transmission functions")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
For WCN6855, board ID specific NVM needs to be downloaded once board ID
is available, but the default NVM is always downloaded currently.
The wrong NVM causes poor RF performance, and effects user experience
for several types of laptop with WCN6855 on the market.
Fix by downloading board ID specific NVM if board ID is available.
Fixes: 095327fede ("Bluetooth: hci_qca: Add support for QTI Bluetooth chip wcn6855")
Cc: stable@vger.kernel.org # 6.4
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Steev Klimaszewski <steev@kali.org> #Thinkpad X13s
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The hdev->reset is never used now and the hdev->cmd_timeout actually
does reset. This patch changes the call path from
hdev->cmd_timeout -> vendor_cmd_timeout -> btusb_reset -> hdev->reset
, to
hdev->reset -> vendor_reset -> btusb_reset
Which makes it clear when we export the hdev->reset to a wider usage
e.g. allowing reset from sysfs.
This patch doesn't introduce any behavior change.
Signed-off-by: Hsin-chen Chuang <chharry@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Remove the cmd timeout count in btusb since we only ever allow one
command in flight at a time. We should always reset after a single
command times out.
Signed-off-by: Hsin-chen Chuang <chharry@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Replace ternary (condition ? "enable" : "disable") syntax with helpers
from string_choices.h because:
1. Simple function call with one argument is easier to read. Ternary
operator has three arguments and with wrapping might lead to quite
long code.
2. Is slightly shorter thus also easier to read.
3. It brings uniformity in the text - same string.
4. Allows deduping by the linker, which results in a smaller binary
file.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Remove resetting mt7921 before downloading the fw, as it may cause
command timeout when performing the reset.
Signed-off-by: Hao Qin <hao.qin@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If insert an USB dongle which chip is not maintained in ic_id_table, it
will hit the NULL point accessed. Add a null point check to avoid the
Kernel Oops.
Fixes: b39910bb54 ("Bluetooth: Populate hci_set_hw_info for Intel and Realtek")
Reviewed-by: Alex Lu <alex_lu@realsil.com.cn>
Signed-off-by: Max Chou <max.chou@realtek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
devm_kstrdup() can return a NULL pointer on failure,but this
returned value in btbcm_get_board_name() is not checked.
Add NULL check in btbcm_get_board_name(), to handle kernel NULL
pointer dereference error.
Fixes: f9183eaad9 ("Bluetooth: btbcm: Use devm_kstrdup()")
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The firmware-name property has been expanded to specify the names of NVM
and rampatch firmware for certain chips, such as the QCA6698 Bluetooth
chip. Although it shares the same IP core as the WCN6855, the QCA6698
has different RF components and RAM sizes, necessitating new firmware
files. This change allows for the configuration of NVM and rampatch in
DT.
Possible configurations:
firmware-name = QCA6698/hpnv21.bin, QCA6698/hpbtfw21.tlv;
firmware-name = QCA6698/hpnv21, QCA6698/hpbtfw21.tlv;
Signed-off-by: Cheng Jiang <quic_chejiang@quicinc.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Different connectivity boards may be attached to the same platform. For
example, QCA6698-based boards can support either a two-antenna or
three-antenna solution, both of which work on the sa8775p-ride platform.
Due to differences in connectivity boards and variations in RF
performance from different foundries, different NVM configurations are
used based on the board ID.
Therefore, in the firmware-name property, if the NVM file has an
extension, the NVM file will be used. Otherwise, the system will first
try the .bNN (board ID) file, and if that fails, it will fall back to
the .bin file.
Possible configurations:
firmware-name = "QCA6698/hpnv21";
firmware-name = "QCA6698/hpnv21.bin";
Signed-off-by: Cheng Jiang <quic_chejiang@quicinc.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When a Bluetooth raw socket is open, the HCI event related to SCO
connection changes are not dispatched to the hci_event module, and
the underlying Bluetooth controller's USB Interface 1 will not be
updated accordingly.
This patch adds `isoc_alt` sysfs attribute, allowing user space
to update the alternate setting of the USB interface alternate
setting as needed.
Signed-off-by: Ying Hsu <yinghsu@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Use usb_autopm_get_interface() and usb_autopm_put_interface()
in btmtk_usb_shutdown(), it could send func ctrl after enabling
autosuspend.
Bluetooth: btmtk_usb_hci_wmt_sync() hci0: Execution of wmt command
timed out
Bluetooth: btmtk_usb_shutdown() hci0: Failed to send wmt func ctrl
(-110)
Fixes: 5c5e8c52e3 ("Bluetooth: btmtk: move btusb_mtk_[setup, shutdown] to btmtk.c")
Signed-off-by: Chris Lu <chris.lu@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes the apparent controller hang issue seen during stress test
where the host sends a truncated payload, followed by HCI commands. The
controller treats these HCI commands as a part of previously truncated
payload, leading to command timeouts.
Adding a serdev_device_wait_until_sent() call after
serdev_device_write_buf() fixed the issue.
Fixes: 689ca16e52 ("Bluetooth: NXP: Add protocol support for NXP Bluetooth chipsets")
Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_devcd_append may lead to the release of the skb, so it cannot be
accessed once it is called.
==================================================================
BUG: KASAN: slab-use-after-free in btmtk_process_coredump+0x2a7/0x2d0 [btmtk]
Read of size 4 at addr ffff888033cfabb0 by task kworker/0:3/82
CPU: 0 PID: 82 Comm: kworker/0:3 Tainted: G U 6.6.40-lockdep-03464-g1d8b4eb3060e #1 b0b3c1cc0c842735643fb411799d97921d1f688c
Hardware name: Google Yaviks_Ufs/Yaviks_Ufs, BIOS Google_Yaviks_Ufs.15217.552.0 05/07/2024
Workqueue: events btusb_rx_work [btusb]
Call Trace:
<TASK>
dump_stack_lvl+0xfd/0x150
print_report+0x131/0x780
kasan_report+0x177/0x1c0
btmtk_process_coredump+0x2a7/0x2d0 [btmtk 03edd567dd71a65958807c95a65db31d433e1d01]
btusb_recv_acl_mtk+0x11c/0x1a0 [btusb 675430d1e87c4f24d0c1f80efe600757a0f32bec]
btusb_rx_work+0x9e/0xe0 [btusb 675430d1e87c4f24d0c1f80efe600757a0f32bec]
worker_thread+0xe44/0x2cc0
kthread+0x2ff/0x3a0
ret_from_fork+0x51/0x80
ret_from_fork_asm+0x1b/0x30
</TASK>
Allocated by task 82:
stack_trace_save+0xdc/0x190
kasan_set_track+0x4e/0x80
__kasan_slab_alloc+0x4e/0x60
kmem_cache_alloc+0x19f/0x360
skb_clone+0x132/0xf70
btusb_recv_acl_mtk+0x104/0x1a0 [btusb]
btusb_rx_work+0x9e/0xe0 [btusb]
worker_thread+0xe44/0x2cc0
kthread+0x2ff/0x3a0
ret_from_fork+0x51/0x80
ret_from_fork_asm+0x1b/0x30
Freed by task 1733:
stack_trace_save+0xdc/0x190
kasan_set_track+0x4e/0x80
kasan_save_free_info+0x28/0xb0
____kasan_slab_free+0xfd/0x170
kmem_cache_free+0x183/0x3f0
hci_devcd_rx+0x91a/0x2060 [bluetooth]
worker_thread+0xe44/0x2cc0
kthread+0x2ff/0x3a0
ret_from_fork+0x51/0x80
ret_from_fork_asm+0x1b/0x30
The buggy address belongs to the object at ffff888033cfab40
which belongs to the cache skbuff_head_cache of size 232
The buggy address is located 112 bytes inside of
freed 232-byte region [ffff888033cfab40, ffff888033cfac28)
The buggy address belongs to the physical page:
page:00000000a174ba93 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x33cfa
head:00000000a174ba93 order:1 entire_mapcount:0 nr_pages_mapped:0 pincount:0
anon flags: 0x4000000000000840(slab|head|zone=1)
page_type: 0xffffffff()
raw: 4000000000000840 ffff888100848a00 0000000000000000 0000000000000001
raw: 0000000000000000 0000000080190019 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888033cfaa80: fb fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc
ffff888033cfab00: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb
>ffff888033cfab80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff888033cfac00: fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc
ffff888033cfac80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Check if we need to call hci_devcd_complete before calling
hci_devcd_append. That requires that we check data->cd_info.cnt >=
MTK_COREDUMP_NUM instead of data->cd_info.cnt > MTK_COREDUMP_NUM, as we
increment data->cd_info.cnt only once the call to hci_devcd_append
succeeds.
Fixes: 0b70151328 ("Bluetooth: btusb: mediatek: add MediaTek devcoredump support")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The continual trickle of small conversion patches is grating on me, and
is really not helping. Just get rid of the 'remove_new' member
function, which is just an alias for the plain 'remove', and had a
comment to that effect:
/*
* .remove_new() is a relic from a prototype conversion of .remove().
* New drivers are supposed to implement .remove(). Once all drivers are
* converted to not use .remove_new any more, it will be dropped.
*/
This was just a tree-wide 'sed' script that replaced '.remove_new' with
'.remove', with some care taken to turn a subsequent tab into two tabs
to make things line up.
I did do some minimal manual whitespace adjustment for places that used
spaces to line things up.
Then I just removed the old (sic) .remove_new member function, and this
is the end result. No more unnecessary conversion noise.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The most significant set of changes is the per netns RTNL. The new
behavior is disabled by default, regression risk should be contained.
Notably the new config knob PTP_1588_CLOCK_VMCLOCK will inherit its
default value from PTP_1588_CLOCK_KVM, as the first is intended to be
a more reliable replacement for the latter.
Core
----
- Started a very large, in-progress, effort to make the RTNL lock
scope per network-namespace, thus reducing the lock contention
significantly in the containerized use-case, comprising:
- RCU-ified some relevant slices of the FIB control path
- introduce basic per netns locking helpers
- namespacified the IPv4 address hash table
- remove rtnl_register{,_module}() in favour of rtnl_register_many()
- refactor rtnl_{new,del,set}link() moving as much validation as
possible out of RTNL lock
- convert all phonet doit() and dumpit() handlers to RCU
- convert IPv4 addresses manipulation to per-netns RTNL
- convert virtual interface creation to per-netns RTNL
the per-netns lock infra is guarded by the CONFIG_DEBUG_NET_SMALL_RTNL
knob, disabled by default ad interim.
- Introduce NAPI suspension, to efficiently switching between busy
polling (NAPI processing suspended) and normal processing.
- Migrate the IPv4 routing input, output and control path from direct
ToS usage to DSCP macros. This is a work in progress to make ECN
handling consistent and reliable.
- Add drop reasons support to the IPv4 rotue input path, allowing
better introspection in case of packets drop.
- Make FIB seqnum lockless, dropping RTNL protection for read
access.
- Make inet{,v6} addresses hashing less predicable.
- Allow providing timestamp OPT_ID via cmsg, to correlate TX packets
and timestamps
Things we sprinkled into general kernel code
--------------------------------------------
- Add small file operations for debugfs, to reduce the struct ops size.
- Refactoring and optimization for the implementation of page_frag API,
This is a preparatory work to consolidate the page_frag
implementation.
Netfilter
---------
- Optimize set element transactions to reduce memory consumption
- Extended netlink error reporting for attribute parser failure.
- Make legacy xtables configs user selectable, giving users
the option to configure iptables without enabling any other config.
- Address a lot of false-positive RCU issues, pointed by recent
CI improvements.
BPF
---
- Put xsk sockets on a struct diet and add various cleanups. Overall,
this helps to bump performance by 12% for some workloads.
- Extend BPF selftests to increase coverage of XDP features in
combination with BPF cpumap.
- Optimize and homogenize bpf_csum_diff helper for all archs and also
add a batch of new BPF selftests for it.
- Extend netkit with an option to delegate skb->{mark,priority}
scrubbing to its BPF program.
- Make the bpf_get_netns_cookie() helper available also to tc(x) BPF
programs.
Protocols
---------
- Introduces 4-tuple hash for connected udp sockets, speeding-up
significantly connected sockets lookup.
- Add a fastpath for some TCP timers that usually expires after close,
the socket lock contention.
- Add inbound and outbound xfrm state caches to speed up state lookups.
- Avoid sending MPTCP advertisements on stale subflows, reducing
risks on loosing them.
- Make neighbours table flushing more scalable, maintaining per device
neigh lists.
Driver API
----------
- Introduce a unified interface to configure transmission H/W shaping,
and expose it to user-space via generic-netlink.
- Add support for per-NAPI config via netlink. This makes napi
configuration persistent across queues removal and re-creation.
Requires driver updates, currently supported drivers are:
nVidia/Mellanox mlx4 and mlx5, Broadcom brcm and Intel ice.
- Add ethtool support for writing SFP / PHY firmware blocks.
- Track RSS context allocation from ethtool core.
- Implement support for mirroring to DSA CPU port, via TC mirror
offload.
- Consolidate FDB updates notification, to avoid duplicates on
device-specific entries.
- Expose DPLL clock quality level to the user-space.
- Support master-slave PHY config via device tree.
Tests and tooling
-----------------
- forwarding: introduce deferred commands, to simplify
the cleanup phase
Drivers
-------
- Updated several drivers - Amazon vNic, Google vNic, Microsoft vNic,
Intel e1000e and Broadcom Tigon3 - to use netdev-genl to link the
IRQs and queues to NAPI IDs, allowing busy polling and better
introspection.
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- mlx5:
- a large refactor to implement support for cross E-Switch
scheduling
- refactor H/W conter management to let it scale better
- H/W GRO cleanups
- Intel (100G, ice)::
- adds support for ethtool reset
- implement support for per TX queue H/W shaping
- AMD/Solarflare:
- implement per device queue stats support
- Broadcom (bnxt):
- improve wildcard l4proto on IPv4/IPv6 ntuple rules
- Marvell Octeon:
- Adds representor support for each Resource Virtualization Unit
(RVU) device.
- Hisilicon:
- adds support for the BMC Gigabit Ethernet
- IBM (EMAC):
- driver cleanup and modernization
- Cisco (VIC):
- raise the queues number limit to 256
- Ethernet virtual:
- Google vNIC:
- implements page pool support
- macsec:
- inherit lower device's features and TSO limits when offloading
- virtio_net:
- enable premapped mode by default
- support for XDP socket(AF_XDP) zerocopy TX
- wireguard:
- set the TSO max size to be GSO_MAX_SIZE, to aggregate larger
packets.
- Ethernet NICs embedded and virtual:
- Broadcom ASP:
- enable software timestamping
- Freescale:
- add enetc4 PF driver
- MediaTek: Airoha SoC:
- implement BQL support
- RealTek r8169:
- enable TSO by default on r8168/r8125
- implement extended ethtool stats
- Renesas AVB:
- enable TX checksum offload
- Synopsys (stmmac):
- support header splitting for vlan tagged packets
- move common code for DWMAC4 and DWXGMAC into a separate FPE
module.
- Add the dwmac driver support for T-HEAD TH1520 SoC
- Synopsys (xpcs):
- driver refactor and cleanup
- TI:
- icssg_prueth: add VLAN offload support
- Xilinx emaclite:
- adds clock support
- Ethernet switches:
- Microchip:
- implement support for the lan969x Ethernet switch family
- add LAN9646 switch support to KSZ DSA driver
- Ethernet PHYs:
- Marvel: 88q2x: enable auto negotiation
- Microchip: add support for LAN865X Rev B1 and LAN867X Rev C1/C2
- PTP:
- Add support for the Amazon virtual clock device
- Add PtP driver for s390 clocks
- WiFi:
- mac80211
- EHT 1024 aggregation size for transmissions
- new operation to indicate that a new interface is to be added
- support radio separation of multi-band devices
- move wireless extension spy implementation to libiw
- Broadcom:
- brcmfmac: optional LPO clock support
- Microchip:
- add support for Atmel WILC3000
- Qualcomm (ath12k):
- firmware coredump collection support
- add debugfs support for a multitude of statistics
- Qualcomm (ath5k):
- Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support
- Realtek:
- rtw88: 8821au and 8812au USB adapters support
- rtw89: add thermal protection
- rtw89: fine tune BT-coexsitence to improve user experience
- rtw89: firmware secure boot for WiFi 6 chip
- Bluetooth
- add Qualcomm WCN785x support for ids Foxconn 0xe0fc/0xe0f3 and
0x13d3:0x3623
- add Realtek RTL8852BE support for id Foxconn 0xe123
- add MediaTek MT7920 support for wireless module ids
- btintel_pcie: add handshake between driver and firmware
- btintel_pcie: add recovery mechanism
- btnxpuart: add GPIO support to power save feature
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=GzPr
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"The most significant set of changes is the per netns RTNL. The new
behavior is disabled by default, regression risk should be contained.
Notably the new config knob PTP_1588_CLOCK_VMCLOCK will inherit its
default value from PTP_1588_CLOCK_KVM, as the first is intended to be
a more reliable replacement for the latter.
Core:
- Started a very large, in-progress, effort to make the RTNL lock
scope per network-namespace, thus reducing the lock contention
significantly in the containerized use-case, comprising:
- RCU-ified some relevant slices of the FIB control path
- introduce basic per netns locking helpers
- namespacified the IPv4 address hash table
- remove rtnl_register{,_module}() in favour of
rtnl_register_many()
- refactor rtnl_{new,del,set}link() moving as much validation as
possible out of RTNL lock
- convert all phonet doit() and dumpit() handlers to RCU
- convert IPv4 addresses manipulation to per-netns RTNL
- convert virtual interface creation to per-netns RTNL
the per-netns lock infrastructure is guarded by the
CONFIG_DEBUG_NET_SMALL_RTNL knob, disabled by default ad interim.
- Introduce NAPI suspension, to efficiently switching between busy
polling (NAPI processing suspended) and normal processing.
- Migrate the IPv4 routing input, output and control path from direct
ToS usage to DSCP macros. This is a work in progress to make ECN
handling consistent and reliable.
- Add drop reasons support to the IPv4 rotue input path, allowing
better introspection in case of packets drop.
- Make FIB seqnum lockless, dropping RTNL protection for read access.
- Make inet{,v6} addresses hashing less predicable.
- Allow providing timestamp OPT_ID via cmsg, to correlate TX packets
and timestamps
Things we sprinkled into general kernel code:
- Add small file operations for debugfs, to reduce the struct ops
size.
- Refactoring and optimization for the implementation of page_frag
API, This is a preparatory work to consolidate the page_frag
implementation.
Netfilter:
- Optimize set element transactions to reduce memory consumption
- Extended netlink error reporting for attribute parser failure.
- Make legacy xtables configs user selectable, giving users the
option to configure iptables without enabling any other config.
- Address a lot of false-positive RCU issues, pointed by recent CI
improvements.
BPF:
- Put xsk sockets on a struct diet and add various cleanups. Overall,
this helps to bump performance by 12% for some workloads.
- Extend BPF selftests to increase coverage of XDP features in
combination with BPF cpumap.
- Optimize and homogenize bpf_csum_diff helper for all archs and also
add a batch of new BPF selftests for it.
- Extend netkit with an option to delegate skb->{mark,priority}
scrubbing to its BPF program.
- Make the bpf_get_netns_cookie() helper available also to tc(x) BPF
programs.
Protocols:
- Introduces 4-tuple hash for connected udp sockets, speeding-up
significantly connected sockets lookup.
- Add a fastpath for some TCP timers that usually expires after
close, the socket lock contention.
- Add inbound and outbound xfrm state caches to speed up state
lookups.
- Avoid sending MPTCP advertisements on stale subflows, reducing
risks on loosing them.
- Make neighbours table flushing more scalable, maintaining per
device neigh lists.
Driver API:
- Introduce a unified interface to configure transmission H/W
shaping, and expose it to user-space via generic-netlink.
- Add support for per-NAPI config via netlink. This makes napi
configuration persistent across queues removal and re-creation.
Requires driver updates, currently supported drivers are:
nVidia/Mellanox mlx4 and mlx5, Broadcom brcm and Intel ice.
- Add ethtool support for writing SFP / PHY firmware blocks.
- Track RSS context allocation from ethtool core.
- Implement support for mirroring to DSA CPU port, via TC mirror
offload.
- Consolidate FDB updates notification, to avoid duplicates on
device-specific entries.
- Expose DPLL clock quality level to the user-space.
- Support master-slave PHY config via device tree.
Tests and tooling:
- forwarding: introduce deferred commands, to simplify the cleanup
phase
Drivers:
- Updated several drivers - Amazon vNic, Google vNic, Microsoft vNic,
Intel e1000e and Broadcom Tigon3 - to use netdev-genl to link the
IRQs and queues to NAPI IDs, allowing busy polling and better
introspection.
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- mlx5:
- a large refactor to implement support for cross E-Switch
scheduling
- refactor H/W conter management to let it scale better
- H/W GRO cleanups
- Intel (100G, ice)::
- add support for ethtool reset
- implement support for per TX queue H/W shaping
- AMD/Solarflare:
- implement per device queue stats support
- Broadcom (bnxt):
- improve wildcard l4proto on IPv4/IPv6 ntuple rules
- Marvell Octeon:
- Add representor support for each Resource Virtualization Unit
(RVU) device.
- Hisilicon:
- add support for the BMC Gigabit Ethernet
- IBM (EMAC):
- driver cleanup and modernization
- Cisco (VIC):
- raise the queues number limit to 256
- Ethernet virtual:
- Google vNIC:
- implement page pool support
- macsec:
- inherit lower device's features and TSO limits when
offloading
- virtio_net:
- enable premapped mode by default
- support for XDP socket(AF_XDP) zerocopy TX
- wireguard:
- set the TSO max size to be GSO_MAX_SIZE, to aggregate larger
packets.
- Ethernet NICs embedded and virtual:
- Broadcom ASP:
- enable software timestamping
- Freescale:
- add enetc4 PF driver
- MediaTek: Airoha SoC:
- implement BQL support
- RealTek r8169:
- enable TSO by default on r8168/r8125
- implement extended ethtool stats
- Renesas AVB:
- enable TX checksum offload
- Synopsys (stmmac):
- support header splitting for vlan tagged packets
- move common code for DWMAC4 and DWXGMAC into a separate FPE
module.
- add dwmac driver support for T-HEAD TH1520 SoC
- Synopsys (xpcs):
- driver refactor and cleanup
- TI:
- icssg_prueth: add VLAN offload support
- Xilinx emaclite:
- add clock support
- Ethernet switches:
- Microchip:
- implement support for the lan969x Ethernet switch family
- add LAN9646 switch support to KSZ DSA driver
- Ethernet PHYs:
- Marvel: 88q2x: enable auto negotiation
- Microchip: add support for LAN865X Rev B1 and LAN867X Rev C1/C2
- PTP:
- Add support for the Amazon virtual clock device
- Add PtP driver for s390 clocks
- WiFi:
- mac80211
- EHT 1024 aggregation size for transmissions
- new operation to indicate that a new interface is to be added
- support radio separation of multi-band devices
- move wireless extension spy implementation to libiw
- Broadcom:
- brcmfmac: optional LPO clock support
- Microchip:
- add support for Atmel WILC3000
- Qualcomm (ath12k):
- firmware coredump collection support
- add debugfs support for a multitude of statistics
- Qualcomm (ath5k):
- Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support
- Realtek:
- rtw88: 8821au and 8812au USB adapters support
- rtw89: add thermal protection
- rtw89: fine tune BT-coexsitence to improve user experience
- rtw89: firmware secure boot for WiFi 6 chip
- Bluetooth
- add Qualcomm WCN785x support for ids Foxconn 0xe0fc/0xe0f3 and
0x13d3:0x3623
- add Realtek RTL8852BE support for id Foxconn 0xe123
- add MediaTek MT7920 support for wireless module ids
- btintel_pcie: add handshake between driver and firmware
- btintel_pcie: add recovery mechanism
- btnxpuart: add GPIO support to power save feature"
* tag 'net-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1475 commits)
mm: page_frag: fix a compile error when kernel is not compiled
Documentation: tipc: fix formatting issue in tipc.rst
selftests: nic_performance: Add selftest for performance of NIC driver
selftests: nic_link_layer: Add selftest case for speed and duplex states
selftests: nic_link_layer: Add link layer selftest for NIC driver
bnxt_en: Add FW trace coredump segments to the coredump
bnxt_en: Add a new ethtool -W dump flag
bnxt_en: Add 2 parameters to bnxt_fill_coredump_seg_hdr()
bnxt_en: Add functions to copy host context memory
bnxt_en: Do not free FW log context memory
bnxt_en: Manage the FW trace context memory
bnxt_en: Allocate backing store memory for FW trace logs
bnxt_en: Add a 'force' parameter to bnxt_free_ctx_mem()
bnxt_en: Refactor bnxt_free_ctx_mem()
bnxt_en: Add mem_valid bit to struct bnxt_ctx_mem_type
bnxt_en: Update firmware interface spec to 1.10.3.85
selftests/bpf: Add some tests with sockmap SK_PASS
bpf: fix recursive lock when verdict program return SK_PASS
wireguard: device: support big tcp GSO
wireguard: selftests: load nf_conntrack if not present
...
These are a number of unrelated cleanups, generally simplifying the
architecture specific header files:
- A series from Al Viro simplifies asm/vga.h, after it turns out that
most of it can be generalized.
- A series from Julian Vetter adds a common version of
memcpy_{to,from}io() and memset_io() and changes most architectures
to use that instead of their own implementation
- A series from Niklas Schnelle concludes his work to make PC
style inb()/outb() optional
- Nicolas Pitre contributes improvements for the generic do_div()
helper
- Christoph Hellwig adds a generic version of page_to_phys()
and phys_to_page(), replacing the slightly different architecture
specific definitions.
- Uwe Kleine-Koenig has a minor cleanup for ioctl definitions
-----BEGIN PGP SIGNATURE-----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=zEHk
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"These are a number of unrelated cleanups, generally simplifying the
architecture specific header files:
- A series from Al Viro simplifies asm/vga.h, after it turns out that
most of it can be generalized.
- A series from Julian Vetter adds a common version of
memcpy_{to,from}io() and memset_io() and changes most architectures
to use that instead of their own implementation
- A series from Niklas Schnelle concludes his work to make PC style
inb()/outb() optional
- Nicolas Pitre contributes improvements for the generic do_div()
helper
- Christoph Hellwig adds a generic version of page_to_phys() and
phys_to_page(), replacing the slightly different architecture
specific definitions.
- Uwe Kleine-Koenig has a minor cleanup for ioctl definitions"
* tag 'asm-generic-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (24 commits)
empty include/asm-generic/vga.h
sparc: get rid of asm/vga.h
asm/vga.h: don't bother with scr_mem{cpy,move}v() unless we need to
vt_buffer.h: get rid of dead code in default scr_...() instances
tty: serial: export serial_8250_warn_need_ioport
lib/iomem_copy: fix kerneldoc format style
hexagon: simplify asm/io.h for !HAS_IOPORT
loongarch: Use new fallback IO memcpy/memset
csky: Use new fallback IO memcpy/memset
arm64: Use new fallback IO memcpy/memset
New implementation for IO memcpy and IO memset
watchdog: Add HAS_IOPORT dependency for SBC8360 and SBC7240
__arch_xprod64(): make __always_inline when optimizing for performance
ARM: div64: improve __arch_xprod_64()
asm-generic/div64: optimize/simplify __div64_const32()
lib/math/test_div64: add some edge cases relevant to __div64_const32()
asm-generic: add an optional pfn_valid check to page_to_phys
asm-generic: provide generic page_to_phys and phys_to_page implementations
asm-generic/io.h: Remove I/O port accessors for HAS_IOPORT=n
tty: serial: handle HAS_IOPORT dependencies
...
Have exception event part of HCI traces which helps for debug.
snoop traces:
> HCI Event: Vendor (0xff) plen 79
Vendor Prefix (0x8780)
Intel Extended Telemetry (0x03)
Unknown extended telemetry event type (0xde)
01 01 de
Unknown extended subevent 0x07
01 01 de 07 01 de 06 1c ef be ad de ef be ad de
ef be ad de ef be ad de ef be ad de ef be ad de
ef be ad de 05 14 ef be ad de ef be ad de ef be
ad de ef be ad de ef be ad de 43 10 ef be ad de
ef be ad de ef be ad de ef be ad de
Fixes: af395330ab ("Bluetooth: btintel: Add Intel devcoredump support")
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Use devm_clk_get_optional() instead of hand writing it.
This saves some LoC and improves the semantic.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The original timeout setting for HCI Reset on shutdown is 10 seconds.
HCI Reset shouldn't take 10 seconds to complete so instead use the
default timeout for commands.
Signed-off-by: Hilda Wu <hildawu@realtek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
of_find_node_by_path() returns a pointer to a device_node with its
refcount incremented, and a call to of_node_put() is required to
decrement the refcount again and avoid leaking the resource.
If 'of_property_read_string_index(root, "compatible", 0, &tmp)' fails,
the function returns without calling of_node_put(root) before doing so.
The automatic cleanup attribute can be used by means of the __free()
macro to automatically call of_node_put() when the variable goes out of
scope, fixing the issue and also accounting for new error paths.
Fixes: 63fac3343b ("Bluetooth: btbcm: Support per-board firmware variants")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
pcim_iomap_regions() and pcim_iomap_table() have been deprecated in
commit e354bb84a4 ("PCI: Deprecate pcim_iomap_table(),
pcim_iomap_regions_request_all()").
Replace these functions with pcim_iomap_region().
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds quirks for broken ats2851 features.
Signed-off-by: Danil Pylaev <danstiv404@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The variable ret is being assigned -ENOMEM however this is never
read and it is being re-assigned a new value when the code jumps
to label resubmit. The assignment is redundant and can be removed.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
During firmware download, vendor specific events like boot up and
secure send result are generated. These events can be safely processed at
the driver level. Passing on these events to stack prints unnecessary
log as below.
Bluetooth: hci0: Malformed MSFT vendor event: 0x02
Fixes: 3368aa357f ("Bluetooth: msft: Handle MSFT Monitor Device Event")
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The switch case statement has a default branch. Thus, the return
statement at the end of the function can never be reached.
Fix it by removing the return statement at the end of the
function.
This issue was reported by Coverity Scan.
Signed-off-by: Everest K.C. <everestkc@everestkc.com.np>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Use the new devm_clk_get_optional_enabled_with_rate() clock helper to
shrink the code a bit.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add DSBR support for BlazarIW, BlazarU and Gale Peak2 cores.
Refer commit eb9e749c01 ("Bluetooth: btintel: Allow configuring drive
strength of BRI") for details about DSBR.
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If the device tree is properly written, the SDIO function device node
should be correctly defined, and the mmc core in Linux should correctly
tie it to the device being probed.
Only fall back to searching for the device node by compatible if the
original device node tied to the device is incorrect, as seen in older
device trees.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> #
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This patch adds a recovery mechanism to recover controller if firmware
download fails due to unresponsive controller, command timeout, firmware
signature verification failure etc. Driver attmepts maximum of 5 times
before giving up.
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The following handshake mechanism needs be followed after firmware
download is completed to bring the firmware to running state.
After firmware fragments of Operational image are downloaded and
secure sends result of the image succeeds,
1. Driver sends HCI Intel reset with boot option #1 to switch FW image.
2. FW sends Alive GP[0] MSIx
3. Driver enables data path (doorbell 0x460 for RBDs, etc...)
4. Driver gets Bootup event from firmware
5. Driver performs D0 entry to device (WRITE to IPC_Sleep_Control =0x0)
6. FW sends Alive GP[0] MSIx
7. Device host interface is fully set for BT protocol stack operation.
8. Driver may optionally get debug event with ID 0x97 which can be dropped
For Intermediate loadger image, all the above steps are applicable
expcept #5 and #6.
On HCI_OP_RESET, firmware raises alive interrupt. Driver needs to wait
for it before passing control over to bluetooth stack.
Co-developed-by: Devegowda Chandrashekar <chandrashekar.devegowda@intel.com>
Signed-off-by: Devegowda Chandrashekar <chandrashekar.devegowda@intel.com>
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds support for driving the chip into sleep or wakeup with a GPIO.
If the device tree property device-wakeup-gpios is defined, the driver
utilizes this GPIO for controlling the chip's power save state, else it
uses the default UART-break method.
Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This changes the chip name of IW615 to IW610.
IW610 (formerly called IW615) is yet to be released to broad market,
hence there is no issue of backward compatibility.
Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This updates all FW names by dropping the _v0 suffix.
Its been decided that all NXP BT/ WiFi FW names won't support _v0 suffix.
The suffix would be kept for next HW versions such as v1, v2 and so on,
which do not have backward compatible FW.
This change affects W8987, IW416 and IW615 chipsets, out of which new FW
files for W8987 and IW615 are yet to be released to broad market.
For IW416, old and new FW names are added to maintain backward
compatibility for existing customers.
Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Change conditions for Bluetooth driver claiming and releasing usb
ISO interface for MediaTek ISO data transmission.
Signed-off-by: Chris Lu <chris.lu@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
MediaTek claim an special usb intr interface for ISO data transmission.
The interface need to be released before unregistering hci device when
usb disconnect. Removing BT usb dongle without properly releasing the
interface may cause Kernel panic while unregister hci device.
Signed-off-by: Chris Lu <chris.lu@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add disconnect callback function in btusb_disconnect which is reserved
for vendor specific usage before deregister hci in btusb_disconnect.
Signed-off-by: Chris Lu <chris.lu@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Move MediaTek Bluetooth power off command before releasing
usb ISO interface.
Signed-off-by: Chris Lu <chris.lu@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Have exception event part of HCI traces which helps for debug.
snoop traces:
> HCI Event: Vendor (0xff) plen 79
Vendor Prefix (0x8780)
Intel Extended Telemetry (0x03)
Unknown extended telemetry event type (0xde)
01 01 de
Unknown extended subevent 0x07
01 01 de 07 01 de 06 1c ef be ad de ef be ad de
ef be ad de ef be ad de ef be ad de ef be ad de
ef be ad de 05 14 ef be ad de ef be ad de ef be
ad de ef be ad de ef be ad de 43 10 ef be ad de
ef be ad de ef be ad de ef be ad de
Fixes: af395330ab ("Bluetooth: btintel: Add Intel devcoredump support")
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In a future patch HAS_IOPORT=n will disable inb()/outb() and friends at
compile time. We thus need to add HAS_IOPORT as dependency for those
drivers using them.
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fake CSR controllers don't seem to handle short-transfer properly which
cause command to time out:
kernel: usb 1-1: new full-speed USB device number 19 using xhci_hcd
kernel: usb 1-1: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=88.91
kernel: usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
kernel: usb 1-1: Product: BT DONGLE10
...
Bluetooth: hci1: Opcode 0x1004 failed: -110
kernel: Bluetooth: hci1: command 0x1004 tx timeout
According to USB Spec 2.0 Section 5.7.3 Interrupt Transfer Packet Size
Constraints a interrupt transfer is considered complete when the size is 0
(ZPL) or < wMaxPacketSize:
'When an interrupt transfer involves more data than can fit in one
data payload of the currently established maximum size, all data
payloads are required to be maximum-sized except for the last data
payload, which will contain the remaining data. An interrupt transfer
is complete when the endpoint does one of the following:
• Has transferred exactly the amount of data expected
• Transfers a packet with a payload size less than wMaxPacketSize or
transfers a zero-length packet'
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219365
Fixes: 7b05933340 ("Bluetooth: btusb: Fix not handling ZPL/short-transfer")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This partially reverts 81b3e33bb054 ("Bluetooth: btusb: Don't fail
external suspend requests") as it introduced a call to hci_suspend_dev
that assumes the system-suspend which doesn't work well when just the
device is being suspended because wakeup flag is only set for remote
devices that can wakeup the system.
Reported-by: Rafael J. Wysocki <rafael@kernel.org>
Reported-by: Heiner Kallweit <hkallweit1@gmail.com>
Reported-by: Kenneth Crudup <kenny@panix.com>
Fixes: 610712298b ("Bluetooth: btusb: Don't fail external suspend requests")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Rafael J. Wysocki <rafael@kernel.org>
Commit 4e0a1d8b06
("Bluetooth: btusb: Don't suspend when there are connections")
introduces a check for connections to prevent auto-suspend but that
actually ignored the fact the .suspend callback can be called for
external suspend requests which
Documentation/driver-api/usb/power-management.rst states the following:
'External suspend calls should never be allowed to fail in this way,
only autosuspend calls. The driver can tell them apart by applying
the :c:func:`PMSG_IS_AUTO` macro to the message argument to the
``suspend`` method; it will return True for internal PM events
(autosuspend) and False for external PM events.'
In addition to that align system suspend with USB suspend by using
hci_suspend_dev since otherwise the stack would be expecting events
such as advertising reports which may not be delivered while the
transport is suspended.
Fixes: 4e0a1d8b06 ("Bluetooth: btusb: Don't suspend when there are connections")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Kiran K <kiran.k@intel.com>
Current release - regressions:
- eth: mlx5: fix wrong reserved field in hca_cap_2 in mlx5_ifc
- eth: am65-cpsw: fix forever loop in cleanup code
Current release - new code bugs:
- eth: mlx5: HWS, fixed double-free in error flow of creating SQ
Previous releases - regressions:
- core: avoid potential underflow in qdisc_pkt_len_init() with UFO
- core: test for not too small csum_start in virtio_net_hdr_to_skb()
- vrf: revert "vrf: remove unnecessary RCU-bh critical section"
- bluetooth:
- fix uaf in l2cap_connect
- fix possible crash on mgmt_index_removed
- dsa: improve shutdown sequence
- eth: mlx5e: SHAMPO, fix overflow of hd_per_wq
- eth: ip_gre: fix drops of small packets in ipgre_xmit
Previous releases - always broken:
- core: fix gso_features_check to check for both dev->gso_{ipv4_,}max_size
- core: fix tcp fraglist segmentation after pull from frag_list
- netfilter: nf_tables: prevent nf_skb_duplicated corruption
- sctp: set sk_state back to CLOSED if autobind fails in sctp_listen_start
- mac802154: fix potential RCU dereference issue in mac802154_scan_worker
- eth: fec: restart PPS after link state change
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=cq2I
-----END PGP SIGNATURE-----
Merge tag 'net-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from ieee802154, bluetooth and netfilter.
Current release - regressions:
- eth: mlx5: fix wrong reserved field in hca_cap_2 in mlx5_ifc
- eth: am65-cpsw: fix forever loop in cleanup code
Current release - new code bugs:
- eth: mlx5: HWS, fixed double-free in error flow of creating SQ
Previous releases - regressions:
- core: avoid potential underflow in qdisc_pkt_len_init() with UFO
- core: test for not too small csum_start in virtio_net_hdr_to_skb()
- vrf: revert "vrf: remove unnecessary RCU-bh critical section"
- bluetooth:
- fix uaf in l2cap_connect
- fix possible crash on mgmt_index_removed
- dsa: improve shutdown sequence
- eth: mlx5e: SHAMPO, fix overflow of hd_per_wq
- eth: ip_gre: fix drops of small packets in ipgre_xmit
Previous releases - always broken:
- core: fix gso_features_check to check for both
dev->gso_{ipv4_,}max_size
- core: fix tcp fraglist segmentation after pull from frag_list
- netfilter: nf_tables: prevent nf_skb_duplicated corruption
- sctp: set sk_state back to CLOSED if autobind fails in
sctp_listen_start
- mac802154: fix potential RCU dereference issue in
mac802154_scan_worker
- eth: fec: restart PPS after link state change"
* tag 'net-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (48 commits)
sctp: set sk_state back to CLOSED if autobind fails in sctp_listen_start
dt-bindings: net: xlnx,axi-ethernet: Add missing reg minItems
doc: net: napi: Update documentation for napi_schedule_irqoff
net/ncsi: Disable the ncsi work before freeing the associated structure
net: phy: qt2025: Fix warning: unused import DeviceId
gso: fix udp gso fraglist segmentation after pull from frag_list
bridge: mcast: Fail MDB get request on empty entry
vrf: revert "vrf: Remove unnecessary RCU-bh critical section"
net: ethernet: ti: am65-cpsw: Fix forever loop in cleanup code
net: phy: realtek: Check the index value in led_hw_control_get
ppp: do not assume bh is held in ppp_channel_bridge_input()
selftests: rds: move include.sh to TEST_FILES
net: test for not too small csum_start in virtio_net_hdr_to_skb()
net: gso: fix tcp fraglist segmentation after pull from frag_list
ipv4: ip_gre: Fix drops of small packets in ipgre_xmit
net: stmmac: dwmac4: extend timeout for VLAN Tag register busy bit check
net: add more sanity checks to qdisc_pkt_len_init()
net: avoid potential underflow in qdisc_pkt_len_init() with UFO
net: ethernet: ti: cpsw_ale: Fix warning on some platforms
net: microchip: Make FDMA config symbol invisible
...
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
no_llseek had been defined to NULL two years ago, in commit 868941b144
("fs: remove no_llseek")
To quote that commit,
At -rc1 we'll need do a mechanical removal of no_llseek -
git grep -l -w no_llseek | grep -v porting.rst | while read i; do
sed -i '/\<no_llseek\>/d' $i
done
would do it.
Unfortunately, that hadn't been done. Linus, could you do that now, so
that we could finally put that thing to rest? All instances are of the
form
.llseek = no_llseek,
so it's obviously safe.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
disable_irq() after request_irq() still has a time gap in which
interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will
disable IRQ auto-enable when request IRQ.
Fixes: bb7f4f0bce ("btmrvl: add platform specific wakeup interrupt support")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Fix driver not allocating memory for struct btintel_data which is used
to store internal data.
Fixes: 6e65a09f92 ("Bluetooth: btintel_pcie: Add *setup* function to download firmware")
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Requesting transfers of the exact same size of wMaxPacketSize may result
in ZPL/short-transfer since the USB stack cannot handle it as we are
limiting the buffer size to be the same as wMaxPacketSize.
Also, in terms of throughput this change has the same effect to
interrupt endpoint as 290ba20081 "Bluetooth: Improve USB driver throughput
by increasing the frame size" had for the bulk endpoint, so users of the
advertisement bearer (e.g. BT Mesh) may benefit from this change.
Fixes: 5e23b923da ("[Bluetooth] Add generic driver for Bluetooth USB devices")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Kiran K <kiran.k@intel.com>
CYW4373 devices soldered onto the PCB (non-removable),
use a UART connection for Bluetooth and the advertised btsdio
support as an SDIO function should be ignored.
Signed-off-by: Scott Ehlert <ehlert@battelle.org>
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
For tracking multiple devices concurrently with a condition.
The patch enables the HCI_QUIRK_USE_MSFT_EXT_ADDRESS_FILTER quirk
on RTL8852B controller.
The quirk setting is based on commit 9e14606d8f ("Bluetooth: msft:
Extended monitor tracking by address filter")
With this setting, when a pattern monitor detects a device, this
feature issues an address monitor for tracking that device. Let the
original pattern monitor keep monitor new devices.
Signed-off-by: Hilda Wu <hildawu@realtek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Use kvmemdup instead of kvmalloc() + memcpy() to simplify the code.
No functional change intended.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Starting a BCM UART controller not defined as a platform device or
a serdev with "btattach -B /dev/ttyS1 -P bcm -S 3000000" works fine
but the serial port remains at the init_speed, i.e. 115200.
The oper_speed is only set if a device is declared in ACPI, device
tree or as a platform device.
This commit copies the serial port speed fixed by hciattach to the
oper_speed on line discipline opening.
Signed-off-by: Frédéric Danis <frederic.danis@collabora.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This enables btnxpuart driver to handle ISO RX packet when DUT is
configured as audio sink.
Tested IW612 on iMX8MMini platform and BlueZ-5.77 as follows:
1) Configured DUT with bap_bcast_sink role in pipewire configuration file.
2) Started pipewire and DUT is able to sync with Broadcast source through
pipewire.
3) ISO data RX is seen in btmon.
4) Audio/Music is heard on audio jack.
Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Tested-by: Sarveshwar Bajaj <sarveshwar.bajaj@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds ISO packet support in h4_recv.h, which was created before ISO
packet handling was added to hci_h4.c and hci_uart.c
Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This inverts the LE State flag so by default we assume the controllers
would report valid states rather than invalid so it is inline with the
respective quirk (HCI_QUIRK_BROKEN_LE_STATES).
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add a new HCI protocol HCI_UART_AML for the Amlogic Bluetooth
controller. It works on the standard H4 protocol via a 4-wire UART
interface, with baud rates up to 4 Mbps.
The controller supports two types of commands: the TCI commands and the
vendor command. The former is for initial setup including setting baud
rates, downloading fw, starting chip and etc, while the latter is for
dumping firmware versions and setting public address after firmware
updates and normal startup.
It was verified on board of T602 (S905X4 + W265S2).
dmesg:
..
[ 5.313450] Bluetooth: HCI UART protocol AML registered
[ 6.506052] Bluetooth: hci0: fw_version: date = 42.28, number = 0xb2fd
...
Co-developed-by: Ye He <ye.he@amlogic.com>
Signed-off-by: Ye He <ye.he@amlogic.com>
Signed-off-by: Yang Li <yang.li@amlogic.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add support for handling ISO RX and TX packets.
Signed-off-by: Kiran <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
On systems in the field, we are seeing this sometimes in the kernel logs:
Bluetooth: qca_controller_memdump() hci0: hci_devcd_init Return:-95
This means that _something_ decided that it wanted to get a memdump
but then hci_devcd_init() returned -EOPNOTSUPP (AKA -95).
The cleanup code in qca_controller_memdump() when we get back an error
from hci_devcd_init() undoes most things but forgets to clear
QCA_IBS_DISABLED. One side effect of this is that, during the next
suspend, qca_suspend() will always get a timeout.
Let's fix it so that we clear the bit.
Fixes: 06d3fdfcdf ("Bluetooth: hci_qca: Add qcom devcoredump support")
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This inverts the LE State quirk so by default we assume the controllers
would report valid states rather than invalid which is how quirks
normally behave, also this would result in HCI command failing it the LE
States are really broken thus exposing the controllers that are really
broken in this respect.
Link: https://github.com/bluez/bluez/issues/584
Fixes: 220915857e ("Bluetooth: Adding driver and quirk defs for multi-role LE")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Unlike qca_regulator_init(), qca_power_shutdown() may be called for
QCA_ROME which does not have qcadev->bt_power assigned. Add a
NULL-pointer check before dereferencing the struct qca_power pointer.
Fixes: eba1718717 ("Bluetooth: hci_qca: make pwrseq calls the default if available")
Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Closes: https://lore.kernel.org/linux-bluetooth/su3wp6s44hrxf4ijvsdfzbvv4unu4ycb7kkvwbx6ltdafkldir@4g7ydqm2ap5j/
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
QCA6390 can albo be used on non-DT systems so we must not make the power
sequencing the only option. Check if the serdev device consumes an OF
node. If so: honor the new contract as per the DT bindings. If not: fall
back to the previous behavior by falling through to the existing
default label.
Fixes: 9a15ce6857 ("Bluetooth: qca: use the power sequencer for QCA6390")
Reported-by: Wren Turkal <wt@penguintechs.org>
Closes: https://lore.kernel.org/linux-bluetooth/27e6a6c5-fb63-4219-be0b-eefa2c116e06@penguintechs.org/
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Now that we call pwrseq_power_off() for all models that hold a valid
power sequencing handle, we can remove the switch case for QCA_6390. The
switch will now use the default label for this model but that's fine: if
it has the BT-enable GPIO than we should use it.
Fixes: eba1718717 ("Bluetooth: hci_qca: make pwrseq calls the default if available")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The caller of these functions in btusb.c is guarded with an
if(IS_ENABLED()) style check, so dead code is left out, but the
declarations are still needed at compile time:
drivers/bluetooth/btusb.c: In function 'btusb_mtk_reset':
drivers/bluetooth/btusb.c:2705:15: error: implicit declaration of function 'btmtk_usb_subsys_reset' [-Wimplicit-function-declaration]
2705 | err = btmtk_usb_subsys_reset(hdev, btmtk_data->dev_id);
| ^~~~~~~~~~~~~~~~~~~~~~
drivers/bluetooth/btusb.c: In function 'btusb_send_frame_mtk':
drivers/bluetooth/btusb.c:2720:23: error: implicit declaration of function 'alloc_mtk_intr_urb' [-Wimplicit-function-declaration]
2720 | urb = alloc_mtk_intr_urb(hdev, skb, btusb_tx_complete);
| ^~~~~~~~~~~~~~~~~~
drivers/bluetooth/btusb.c:2720:21: error: assignment to 'struct urb *' from 'int' makes pointer from integer without a cast [-Wint-conversion]
2720 | urb = alloc_mtk_intr_urb(hdev, skb, btusb_tx_complete);
| ^
Fixes: f0c83a23fc ("Bluetooth: btmtk: Fix btmtk.c undefined reference build error")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The previous fix was incomplete as the link failure still persists
with CONFIG_USB=m when the sdio or serial wrappers for btmtk.c
are build-in:
btmtk.c:(.text+0x468): undefined reference to `usb_alloc_urb'
btmtk.c:(.text+0x488): undefined reference to `usb_free_urb'
btmtk.c:(.text+0x500): undefined reference to `usb_anchor_urb'
btmtk.c:(.text+0x50a): undefined reference to `usb_submit_urb'
btmtk.c:(.text+0x92c): undefined reference to `usb_control_msg'
btmtk.c:(.text+0xa92): undefined reference to `usb_unanchor_urb'
btmtk.c:(.text+0x11e4): undefined reference to `usb_set_interface'
btmtk.c:(.text+0x120a): undefined reference to `usb_kill_anchored_urbs'
Disallow this configuration.
Fixes: f0c83a23fc ("Bluetooth: btmtk: Fix btmtk.c undefined reference build error")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
MediaTek moved some usb interface related function to btmtk.c which
may cause build failed if BT USB Kconfig wasn't enabled.
Fix undefined reference by adding config check.
btmtk.c:(.text+0x89c): undefined reference to `usb_alloc_urb'
btmtk.c:(.text+0x8e3): undefined reference to `usb_free_urb'
btmtk.c:(.text+0x956): undefined reference to `usb_free_urb'
btmtk.c:(.text+0xa0e): undefined reference to `usb_anchor_urb'
btmtk.c:(.text+0xb43): undefined reference to `usb_autopm_get_interface'
btmtk.c:(.text+0xb7e): undefined reference to `usb_autopm_put_interface'
btmtk.c:(.text+0xf70): undefined reference to `usb_disable_autosuspend'
btmtk.c:(.text+0x133a): undefined reference to `usb_control_msg'
Fixes: d019930b00 ("Bluetooth: btmtk: move btusb_mtk_hci_wmt_sync to btmtk.c")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202407091928.AH0aGZnx-lkp@intel.com/
Signed-off-by: Chris Lu <chris.lu@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Do not attempt to send any hci command to controller if *setup* function
fails.
Fixes: af395330ab ("Bluetooth: btintel: Add Intel devcoredump support")
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Several new features here:
- Virtio find vqs API has been reworked
(required to fix the scalability issue we have with
adminq, which I hope to merge later in the cycle)
- vDPA driver for Marvell OCTEON
- virtio fs performance improvement
- mlx5 migration speedups
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmaXjQQPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpnIsH/jVNqAQbe/vaBQdNMdnsA+P9A9unLbYRxYCQ
tN73mQRIXKtnZHBRAEbMGq52HPYg8HlN2HJSgyNo6I6t8VD+PiOco7m+3GpmqEcW
aXPOPl0BAbVoDgyutxRuuodP8Z61lBx0mG6iOxpzTXOPGlpQqtPCFHO8YnodqnPf
tMix/5uAqgZKV2siCbw5DtzwEc0gDHU8qsD0/nyoS5nBDF9yh/ardr5P/qiyFDQH
atCNYTOhIFU83pLAaw0fpCGbkt7gxf+5RpWVx3wkYww+/MwvYhsveRvQyaGbBz3n
WDtET3SOtVTta98OAGIKCq/2z8f6mYXBP7vXapBgnJG3vwS/poQ=
=LYua
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
"Several new features here:
- Virtio find vqs API has been reworked (required to fix the
scalability issue we have with adminq, which I hope to merge later
in the cycle)
- vDPA driver for Marvell OCTEON
- virtio fs performance improvement
- mlx5 migration speedups
Fixes, cleanups all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (56 commits)
virtio: rename virtio_find_vqs_info() to virtio_find_vqs()
virtio: remove unused virtio_find_vqs() and virtio_find_vqs_ctx() helpers
virtio: convert the rest virtio_find_vqs() users to virtio_find_vqs_info()
virtio_balloon: convert to use virtio_find_vqs_info()
virtiofs: convert to use virtio_find_vqs_info()
scsi: virtio_scsi: convert to use virtio_find_vqs_info()
virtio_net: convert to use virtio_find_vqs_info()
virtio_crypto: convert to use virtio_find_vqs_info()
virtio_console: convert to use virtio_find_vqs_info()
virtio_blk: convert to use virtio_find_vqs_info()
virtio: rename find_vqs_info() op to find_vqs()
virtio: remove the original find_vqs() op
virtio: call virtio_find_vqs_info() from virtio_find_single_vq() directly
virtio: convert find_vqs() op implementations to find_vqs_info()
virtio_pci: convert vp_*find_vqs() ops to find_vqs_info()
virtio: introduce virtio_queue_info struct and find_vqs_info() config op
virtio: make virtio_find_single_vq() call virtio_find_vqs()
virtio: make virtio_find_vqs() call virtio_find_vqs_ctx()
caif_virtio: use virtio_find_single_vq() for single virtqueue finding
vdpa/mlx5: Don't enable non-active VQs in .set_vq_ready()
...
Since the original virtio_find_vqs() is no longer present, rename
virtio_find_vqs_info() back to virtio_find_vqs().
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Message-Id: <20240708074814.1739223-20-jiri@resnulli.us>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Instead of passing separate names and callbacks arrays
to virtio_find_vqs(), have one of virtual_queue_info structs and
pass it to virtio_find_vqs_info().
Suggested-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Message-Id: <20240708074814.1739223-18-jiri@resnulli.us>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Several recent patches added static stubs to btmtk.h without the inline
keyword, which causes instances of -Wunused-function when those stubs
are not used anywhere in a file that includes the header:
In file included from drivers/bluetooth/btusb.c:28:
drivers/bluetooth/btmtk.h:254:13: warning: 'btmtk_fw_get_filename' defined but not used [-Wunused-function]
254 | static void btmtk_fw_get_filename(char *buf, size_t size, u32 dev_id,
| ^~~~~~~~~~~~~~~~~~~~~
drivers/bluetooth/btmtk.h:249:12: warning: 'btmtk_process_coredump' defined but not used [-Wunused-function]
249 | static int btmtk_process_coredump(struct hci_dev *hdev, struct sk_buff *skb)
| ^~~~~~~~~~~~~~~~~~~~~~
drivers/bluetooth/btmtk.h:243:12: warning: 'btmtk_register_coredump' defined but not used [-Wunused-function]
243 | static int btmtk_register_coredump(struct hci_dev *hdev, const char *name,
| ^~~~~~~~~~~~~~~~~~~~~~~
drivers/bluetooth/btmtk.h:233:12: warning: 'btmtk_setup_firmware' defined but not used [-Wunused-function]
233 | static int btmtk_setup_firmware(struct hci_dev *hdev, const char *fwname,
| ^~~~~~~~~~~~~~~~~~~~
drivers/bluetooth/btmtk.h:227:12: warning: 'btmtk_setup_firmware_79xx' defined but not used [-Wunused-function]
227 | static int btmtk_setup_firmware_79xx(struct hci_dev *hdev, const char *fwname,
| ^~~~~~~~~~~~~~~~~~~~~~~~~
Add inline to all the stubs in btmtk.h (even ones that do not currently
have any warnings associated with them) to ensure there are never unused
function warnings from these stubs, as is customary for the kernel.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes the following build error introduced by b80f4e3b8c
("Bluetooth: hci_qca: schedule a devm action for disabling the clock"):
drivers/bluetooth/hci_qca.c: In function ‘qca_serdev_remove’:
drivers/bluetooth/hci_qca.c:2501:2: error: label at end of compound statement
2501 | default:
| ^~~~~~~
Fixes: b80f4e3b8c ("Bluetooth: hci_qca: schedule a devm action for disabling the clock")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In preparation for using the power sequencing subsystem on sm8650 boards
and X13s laptop let's make pwrseq the default for wcn7850 and wcn6855.
Both these models require an enable GPIO so we can safely assume that if
the property is not there, then we should try to get the power
sequencer. Due to how the pwrseq lookup works - checking the provider at
run-time - we cannot really do it the other way around as we'd get stuck
forever on -EPROBE_DEFER.
If the relevant OF node does have the 'enable-gpios' property, we
fallback to the existing code for backward compatibility with older DTs.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If the device has a power sequencing handle, use it first. Otherwise
fall back to whatever code already exists.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Now that all three branches of the switch end up doing the same thing,
we can move the call to hci_uart_register_device() past it and unify the
error message.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In preparation for unduplicating the hci_uart registration code,
schedule a devres action for disabling the SUSCLK rather than doing it
manually.
We cannot really use devm_clk_get_enabled() as we also set the rate
before enabling the clock. While this should in theory work, I don't
want to risk breaking existing users. One solution for the future is to
add devm_clk_get_enabled_with_rate() to the clock framework.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes the warnings 'nxp_serdev_resume' and 'nxp_serdev_suspend'
defined but not used.
Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202407100518.06Xxq5PK-lkp@intel.com/
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds handling for system suspend and resume. While the host enters
suspend state, the driver will drive the chip into low power state.
Similarly when system is resuming, the driver will wake up the chip.
Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds support for IW615 chipset with it's bootloader signature
and firmware file.
Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds support for AW693 A1 chipset with it's bootloader signature
and firmware file.
No firmware name change needed for AW693 A0 chipset.
Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This patch implements functions for ISO data send and receive in btusb
driver for MediaTek's controller.
MediaTek defines a specific interrupt endpoint for ISO data transmissin
because the characteristics of interrupt endpoint are similar to the
application of ISO data which can support guaranteed transmissin
bandwidth, enough maximum data length and error checking mechanism.
Driver sets up ISO interface and endpoints in btusb_mtk_setup and clears
the setup in btusb_mtk_shutdown. These flow can't move to btmtk.c due to
btusb_driver is only defined in btusb.c when claiming/relaesing interface.
ISO packet anchor stops when driver suspending and resubmit interrupt urb
for ISO data when driver resuming.
Signed-off-by: Chris Lu <chris.lu@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Move btusb_recv_acl_mtk from btusb.c to btmtk.c which holds
vendor specific stuff and would make btusb.c clean.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Chris Lu <chris.lu@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Move btusb_mtk_[setup, shutdown] and related function from
btusb.c to btmtk.c which holds vendor specific stuff and
would make btusb.c clean.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Chris Lu <chris.lu@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Move btusb_mtk_hci_wmt_sync from btusb.c to btmtk.c which holds
vendor specific stuff and would make btusb.c clean.
Add usb.h header to btmtksdio.c/btmtkuart.c for usb related element
defined in btmtk.h
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Chris Lu <chris.lu@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add suspend/resum callback function in btusb_data which are reserved
for vendor specific usage during suspend/resume. hdev->suspend will be
added before stop traffic in btusb_suspend and hdev-> resume will be
added after resubmit urb in btusb_resume.
Signed-off-by: Chris Lu <chris.lu@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Rename btmediatek_data to have a consistent prefix throughout the driver.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Chris Lu <chris.lu@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Update the code to immediately return an error code if accessing a
related register fails. This ensures that our desired logic for
subsequent register operations is maintained and allows us to promptly
catch any unexpected errors.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Chris Lu <chris.lu@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Remove the unnecessary goto tag whether there is an error or not, we have
to free the buffer at the end of the function.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Chris Lu <chris.lu@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
We unnecessarily fallthrough the case for QCA6390 when initializing the
device and hit the condition where - due to the lack of the enable-gpio
- we disable power management despite using the power sequencer. We don't
need to look for clocks on this model so it makes more sense to just
register the hci device and break the switch.
Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: 9a15ce6857 ("Bluetooth: qca: use the power sequencer for QCA6390")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # RB5
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
BT_HCIUART_QCA, which is a bool and an HCI UART component, uses now
power sequencing, so we need to be sure BT_HCIUART_QCA=y and
POWER_SEQUENCING=m cannot happen:
/usr/bin/aarch64-linux-gnu-ld: drivers/bluetooth/hci_qca.o: in function `qca_serdev_probe':
drivers/bluetooth/hci_qca.c:2401:(.text+0xc48): undefined reference to `devm_pwrseq_get'
/usr/bin/aarch64-linux-gnu-ld: drivers/bluetooth/hci_qca.o: in function `qca_power_shutdown':
drivers/bluetooth/hci_qca.c:2192:(.text+0x29e8): undefined reference to `pwrseq_power_off'
/usr/bin/aarch64-linux-gnu-ld: drivers/bluetooth/hci_qca.o: in function `qca_power_on':
drivers/bluetooth/hci_qca.c:1808:(.text+0x3390): undefined reference to `pwrseq_power_on'
Fixes: 9a15ce6857 ("Bluetooth: qca: use the power sequencer for QCA6390")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Fixes: f3b845e0ae ("Bluetooth: btintel: Add support to download intermediate loader")
Cc: Kiran K <kiran.k@intel.com>
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Use the pwrseq subsystem's consumer API to run the power-up sequence for
the Bluetooth module of the QCA6390 package.
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD, SM8650-QRD & SM8650-HDK
Tested-by: Caleb Connolly <caleb.connolly@linaro.org> # OnePlus 8T
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This handles the timeout error codes sent by the chip as part of the
bootloader signatures during firmware download process.
When the bootloader does not receive a response packet from the host
within a specific time, it adds an error code to the bootloader
signature while requesting for the FW chunk from the same offset.
The host is expected to clear this error code with a NAK, and reply to
only those bootloader signatures which have error code 0.
However, the driver was ignoring this error code and replying with the
firmware chunks instead, which is apparently ignored by the chip and the
chip resends the same bootloader signature with the error code again. This
happens in a loop until the error code self clears and firmware download
proceeds ahead, adding a couple of milliseconds to the total firmware
download time.
Commit 689ca16e52 was an initial implementation which simply printed
the following line during driver debug:
- FW Download received err 0x04 from chip
This commit adds the expected handling to the error codes.
This error handling is valid for data_req bootloader signatures for V3
and future bootloader versions.
Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Fixes: 689ca16e52 ("Bluetooth: NXP: Add protocol support for NXP Bluetooth chipsets")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This updates the firmware names of 3 chipsets: w8987, w8997, w9098.
These changes are been done to standardize chip specific firmware
file names to be in sync with firmware names of newer chipsets.
The naming convention for BT-only files would be as follows:
For dual-radio WiFi+BT chipsets:
- <protocol-BT><chip-name>_bt_v<HW-version>.bin
For tri-radio WiFi+BT+15.4 chipsets:
- <protocol-BT><protocol-15.4><chip-name>_bt_v<HW-version>.bin
To maintain backward compatibility, this commit adds a provision to
request older firmware file name, if new firmware file name not found in
/lib/firmware/nxp/.
A new device tree property has been introduced called firmware-name, to
override the hardcoded firmware names (old and new) in the driver.
Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This new variant needs a different core2_window1 and always uses
beamforming.
The BAR2 also has an offset (RAM start, presumably), so add that.
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
[sven: rebased, updated some comments, mentioned 4388 in Kconfig]
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When HCI raw sockets are opened, the Bluetooth kernel module doesn't
track CIS/BIS connections. User-space applications have to identify
ISO data by maintaining connection information and look up the mapping
for each ACL data packet received. Besides, btsnoop log captured in
kernel couldn't tell ISO data from ACL data in this case.
To avoid additional lookups, this patch introduces vendor-specific
packet classification for Intel BT controllers to distinguish
ISO data packets from ACL data packets.
Signed-off-by: Ying Hsu <yinghsu@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Remove memset(0) after dma_alloc_coherent(), which already zeroes out
the memory, and fix the following two Coccinelle/coccicheck warnings
reported by zalloc-simple.cocci:
btintel_pcie.c:837:19-37: WARNING: dma_alloc_coherent used in
/* Allocate full chunk of data buffer for DMA first and do indexing and
* initialization next, so it can be freed easily
*/
rxq->buf_v_addr already zeroes out memory, so memset is not needed
btintel_pcie.c:792:19-37: WARNING: dma_alloc_coherent used in
/* Allocate full chunk of data buffer for DMA first and do indexing and
* initialization next, so it can be freed easily
*/
txq->buf_v_addr already zeroes out memory, so memset is not needed
Fixes: c2b636b3f7 ("Bluetooth: btintel_pcie: Add support for PCIe transport")
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
It is preferred to use sizeof(*pointer) instead of sizeof(type)
due to the type of the variable can change and one needs not
change the former (unlike the latter). This patch has no effect
on runtime behavior.
Signed-off-by: Erick Archer <erick.archer@outlook.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
'hci_nokia_radio_hdr' looks like it was unused since it's
initial commit.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Free irq before releasing irq vector.
Fixes: c2b636b3f7 ("Bluetooth: btintel_pcie: Add support for PCIe transport")
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Firmware sequencer (FSEQ) is a common code shared across Bluetooth
and Wifi. Printing FSEQ will help to debug if there is any mismatch
between Bluetooth and Wifi FSEQ.
Make 'btintel_print_fseq_info' public and use it in btintel_pcie.c.
dmesg:
....
[ 5335.695740] Bluetooth: hci0: Device booted in 33872 usecs
[ 5335.695918] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-0190-0291.ddc
[ 5335.697011] Bluetooth: hci0: Applying Intel DDC parameters completed
[ 5335.697837] Bluetooth: hci0: Firmware timestamp 2024.20 buildtype 0 build 62871
[ 5335.697848] Bluetooth: hci0: Firmware SHA1: 0xeffdce06
[ 5335.698655] Bluetooth: hci0: Fseq status: Success (0x00)
[ 5335.698666] Bluetooth: hci0: Fseq executed: 00.00.04.176
[ 5335.698670] Bluetooth: hci0: Fseq BT Top: 00.00.04.176
[ 5335.750204] Bluetooth: MGMT ver 1.22
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add the support of MT7922 bluetooth subsystem reset that was called the
auto revert to self-recover from the fatal error in the controller like
the host encounters HCI cmd timeout or the controller crashes.
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Hao Qin <hao.qin@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reset the controller before downloading the firmware to improve its
reliability. This includes situations like cold or warm reboots, ensuring
the controller is in its initial state before starting the firmware
download.
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Co-developed-by: Chris Lu <chris.lu@mediatek.com>
Signed-off-by: Chris Lu <chris.lu@mediatek.com>
Signed-off-by: Hao Qin <hao.qin@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Extract the function btusb_mtk_subsys_reset from the btusb_mtk_reset
for the future handling of resetting bluetooth controller without
the USB reset.
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Hao Qin <hao.qin@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Apply the common btmtk_fw_get_filename to avoid the similar coding in each
driver.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Include a shared function to get the firmware name, to prevent repeating
code for similar chipsets.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Current flow iterates the ACPI table associated with Bluetooth
controller looking for PPAG method. Method name can be directly passed
to acpi_evaluate_object function instead of iterating the table.
Fixes: c585a92b2f ("Bluetooth: btintel: Set Per Platform Antenna Gain(PPAG)")
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a new flag BTNXPUART_FW_DOWNLOAD_ABORT which handles the
situation where driver is removed while firmware download is in
progress.
logs:
modprobe btnxpuart
[65239.230431] Bluetooth: hci0: ChipID: 7601, Version: 0
[65239.236670] Bluetooth: hci0: Request Firmware: nxp/uartspi_n61x_v1.bin.se
rmmod btnxpuart
[65241.425300] Bluetooth: hci0: FW Download Aborted
Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Tested-by: Guillaume Legoupil <guillaume.legoupil@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
BCM4388 takes over 2 seconds to boot, so increase the timeout.
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
BCM4377_TIMEOUT is always used to wait for completitions and their API
expects a timeout in jiffies instead of msecs.
Fixes: 8a06127602 ("Bluetooth: hci_bcm4377: Add new driver for BCM4377 PCIe boards")
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This sets the default power save mode setting to enabled.
The power save feature is now stable and stress test issues, such as the
TX timeout error, have been resolved.
commit c7ee0bc8db32 ("Bluetooth: btnxpuart: Resolve TX timeout error in
power save stress test")
With this setting, the driver will send the vendor command to FW at
startup, to enable power save feature.
User can disable this feature using the following vendor command:
hcitool cmd 3f 23 03 00 00 (HCI_NXP_AUTO_SLEEP_MODE)
Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Commit 272970be3d ("Bluetooth: hci_qca: Fix driver shutdown on closed
serdev") will cause below regression issue:
BT can't be enabled after below steps:
cold boot -> enable BT -> disable BT -> warm reboot -> BT enable failure
if property enable-gpios is not configured within DT|ACPI for QCA6390.
The commit is to fix a use-after-free issue within qca_serdev_shutdown()
by adding condition to avoid the serdev is flushed or wrote after closed
but also introduces this regression issue regarding above steps since the
VSC is not sent to reset controller during warm reboot.
Fixed by sending the VSC to reset controller within qca_serdev_shutdown()
once BT was ever enabled, and the use-after-free issue is also fixed by
this change since the serdev is still opened before it is flushed or wrote.
Verified by the reported machine Dell XPS 13 9310 laptop over below two
kernel commits:
commit e00fc2700a3f ("Bluetooth: btusb: Fix triggering coredump
implementation for QCA") of bluetooth-next tree.
commit b23d98d46d ("Bluetooth: btusb: Fix triggering coredump
implementation for QCA") of linus mainline tree.
Fixes: 272970be3d ("Bluetooth: hci_qca: Fix driver shutdown on closed serdev")
Cc: stable@vger.kernel.org
Reported-by: Wren Turkal <wt@penguintechs.org>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218726
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Tested-by: Wren Turkal <wt@penguintechs.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
check pdata return of skb_pull_data, instead of data.
Fixes: c2b636b3f7 ("Bluetooth: btintel_pcie: Add support for PCIe transport")
Signed-off-by: Vijay Satija <vijay.satija@intel.com>
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
We are releasing a single msgid, so the order argument to
bitmap_release_region must be zero.
Fixes: 8a06127602 ("Bluetooth: hci_bcm4377: Add new driver for BCM4377 PCIe boards")
Cc: stable@vger.kernel.org
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
