mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
synced 2025-08-27 15:36:48 +00:00
loongarch-next
184 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Robin Murphy
|
bcb81ac6ae |
iommu: Get DT/ACPI parsing into the proper probe path
In hindsight, there were some crucial subtleties overlooked when moving
{of,acpi}_dma_configure() to driver probe time to allow waiting for
IOMMU drivers with -EPROBE_DEFER, and these have become an
ever-increasing source of problems. The IOMMU API has some fundamental
assumptions that iommu_probe_device() is called for every device added
to the system, in the order in which they are added. Calling it in a
random order or not at all dependent on driver binding leads to
malformed groups, a potential lack of isolation for devices with no
driver, and all manner of unexpected concurrency and race conditions.
We've attempted to mitigate the latter with point-fix bodges like
iommu_probe_device_lock, but it's a losing battle and the time has come
to bite the bullet and address the true source of the problem instead.
The crux of the matter is that the firmware parsing actually serves two
distinct purposes; one is identifying the IOMMU instance associated with
a device so we can check its availability, the second is actually
telling that instance about the relevant firmware-provided data for the
device. However the latter also depends on the former, and at the time
there was no good place to defer and retry that separately from the
availability check we also wanted for client driver probe.
Nowadays, though, we have a proper notion of multiple IOMMU instances in
the core API itself, and each one gets a chance to probe its own devices
upon registration, so we can finally make that work as intended for
DT/IORT/VIOT platforms too. All we need is for iommu_probe_device() to
be able to run the iommu_fwspec machinery currently buried deep in the
wrong end of {of,acpi}_dma_configure(). Luckily it turns out to be
surprisingly straightforward to bootstrap this transformation by pretty
much just calling the same path twice. At client driver probe time,
dev->driver is obviously set; conversely at device_add(), or a
subsequent bus_iommu_probe(), any device waiting for an IOMMU really
should *not* have a driver already, so we can use that as a condition to
disambiguate the two cases, and avoid recursing back into the IOMMU core
at the wrong times.
Obviously this isn't the nicest thing, but for now it gives us a
functional baseline to then unpick the layers in between without many
more awkward cross-subsystem patches. There are some minor side-effects
like dma_range_map potentially being created earlier, and some debug
prints being repeated, but these aren't significantly detrimental. Let's
make things work first, then deal with making them nice.
With the basic flow finally in the right order again, the next step is
probably turning the bus->dma_configure paths inside-out, since all we
really need from bus code is its notion of which device and input ID(s)
to parse the common firmware properties with...
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # pci-driver.c
Acked-by: Rob Herring (Arm) <robh@kernel.org> # of/device.c
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/e3b191e6fd6ca9a1e84c5e5e40044faf97abb874.1740753261.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
||
|
Oliver Upton
|
f818227a2f |
ACPI: GTDT: Relax sanity checking on Platform Timers array count
Perhaps unsurprisingly there are some platforms where the GTDT isn't
quite right and the Platforms Timer array overflows the length of the
overall table.
While the recently-added sanity checking isn't wrong, it makes it
impossible to boot the kernel on offending platforms. Try to hobble
along and limit the Platform Timer count to the bounds of the table.
Cc: Marc Zyngier <maz@kernel.org>
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Zheng Zengkai <zhengzengkai@huawei.com>
Cc: stable@vger.kernel.org
Fixes:
|
||
|
Qinxin Xia
|
c2b46ae022 |
ACPI/IORT: Add PMCG platform information for HiSilicon HIP09A
HiSilicon HIP09A platforms using the same SMMU PMCG with HIP09 and thus suffers the same erratum. List them in the PMCG platform information list without introducing a new SMMU PMCG Model. Update the silicon-errata.rst as well. Reviewed-by: Yicong Yang <yangyicong@hisilicon.com> Acked-by: Hanjun Guo <guohanjun@huawei.com> Signed-off-by: Qinxin Xia <xiaqinxin@huawei.com> Link: https://lore.kernel.org/r/20241205013331.1484017-1-xiaqinxin@huawei.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> |
||
|
Linus Torvalds
|
b86545e02e |
More ACPI updates for 6.13-rc1
- Introduce acpi_arch_init() for architecture-specific ACPI subsystem
initialization (Miao Wang).
- Clean up Asus quirks in acpi_quirk_skip_dmi_ids[] and add a quirk
to skip I2C clients on Acer Iconia One 8 A1-840 (Hans de Goede).
- Make the ACPI processor_idle driver use acpi_idle_play_dead() for
all idle states regardless of their types (Rafael Wysocki).
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmdHYvESHHJqd0Byand5
c29ja2kubmV0AAoJEILEb/54YlRxtw4P/jk4bB/LvID38gKwbfmUg0z5o8k7PyaM
iMUSzfiKOm4gUBEeq5qw6i29mMWRl+R0V1LxeueHu1TCev26FFLF/R1ghaUV8FtK
7pk+XHPHNOvGlPq8VoGegeeJCh9MPlWwqlfdGYyOxWJJHTXlMxnzmcj8MD5ifwZ2
1yeOy6wQ47S78s4GjAlasUQh9ObJZJnN3V0aMK+D0FGpIWyKTVyJAiq3WSO01+12
bTj7vpuTGBqDCYpj+ONl1eoxOPuPoeo+LBxTyJKeFkVHeOD4kIa7VNHM28dzl1mq
n34+f1IAlX7knR1MypYLTq6N2UivygjfNwAyNIrpBG+hu6640BzUUpBwSHp2rC7i
ME1dW4FekGhphuZSix3w/Ie530tkvfzYRibQwBcdyE8tu6t3ucthtDu2ZM889iaX
hAG4RLiHIK5/pYPBqGfKKTjGNhhblo46A46SQJnRwhU3HeL1RqaUpZjQov6V3EEo
9FwsUck+dFRMxdSyYpHpg0gPbz7SFKuBxOqOcTdUoFs2wgRj9dj86iMph42clLNt
uvGjNnnrESg1bI8kK9aYUgW1U7FXfhine4Wy3S+Rad8mgPaaOTguZwLr+ITh5usE
Nwk26eR9FzIkeaxZzMiiOS2Gk69DMucBphFgvrOSZt8RtmeoqxiXyYDMjELqdJK9
W714U0aw2/pR
=yL7H
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.13-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These add a common init function for arch-specific ACPI
initialization, clean up idle states initialization in the ACPI
processor_idle driver and update quirks:
- Introduce acpi_arch_init() for architecture-specific ACPI subsystem
initialization (Miao Wang)
- Clean up Asus quirks in acpi_quirk_skip_dmi_ids[] and add a quirk
to skip I2C clients on Acer Iconia One 8 A1-840 (Hans de Goede)
- Make the ACPI processor_idle driver use acpi_idle_play_dead() for
all idle states regardless of their types (Rafael Wysocki)"
* tag 'acpi-6.13-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: introduce acpi_arch_init()
ACPI: x86: Clean up Asus entries in acpi_quirk_skip_dmi_ids[]
ACPI: x86: Add skip i2c clients quirk for Acer Iconia One 8 A1-840
ACPI: processor_idle: Use acpi_idle_play_dead() for all C-states
|
||
|
Miao Wang
|
9d8a2b033d |
ACPI: introduce acpi_arch_init()
To avoid arch-specific code in general ACPI initialization flow, introduce a weak symbol acpi_arch_init(). Currently, arm64 and riscv can utillize this to insert their arch-specific flow. In the future, other architectures can also have a chance to define their own arch-specific ACPI initialization process if necessary. Reviewed-by: Sunil V L <sunilvl@ventanamicro.com> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Hanjun Guo <guohanjun@huawei.com> Signed-off-by: Miao Wang <shankerwangmiao@gmail.com> Link: https://patch.msgid.link/20241121-intro-acpi-arch-init-v4-1-b1fb517e7d8b@gmail.com [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Linus Torvalds
|
341d041daa |
iommufd 6.13 merge window pull
Several new features and uAPI for iommufd:
- IOMMU_IOAS_MAP_FILE allows passing in a file descriptor as the backing
memory for an iommu mapping. To date VFIO/iommufd have used VMA's and
pin_user_pages(), this now allows using memfds and memfd_pin_folios().
Notably this creates a pure folio path from the memfd to the iommu page
table where memory is never broken down to PAGE_SIZE.
- IOMMU_IOAS_CHANGE_PROCESS moves the pinned page accounting between two
processes. Combined with the above this allows iommufd to support a VMM
re-start using exec() where something like qemu would exec() a new
version of itself and fd pass the memfds/iommufd/etc to the new
process. The memfd allows DMA access to the memory to continue while
the new process is getting setup, and the CHANGE_PROCESS updates all
the accounting.
- Support for fault reporting to userspace on non-PRI HW, such as ARM
stall-mode embedded devices.
- IOMMU_VIOMMU_ALLOC introduces the concept of a HW/driver backed virtual
iommu. This will be used by VMMs to access hardware features that are
contained with in a VM. The first use is to inform the kernel of the
virtual SID to physical SID mapping when issuing SID based invalidation
on ARM. Further uses will tie HW features that are directly accessed by
the VM, such as invalidation queue assignment and others.
- IOMMU_VDEVICE_ALLOC informs the kernel about the mapping of virtual
device to physical device within a VIOMMU. Minimially this is used to
translate VM issued cache invalidation commands from virtual to physical
device IDs.
- Enhancements to IOMMU_HWPT_INVALIDATE and IOMMU_HWPT_ALLOC to work with
the VIOMMU
- ARM SMMuv3 support for nested translation. Using the VIOMMU and VDEVICE
the driver can model this HW's behavior for nested translation. This
includes a shared branch from Will.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCZzzKKwAKCRCFwuHvBreF
YaCMAQDOQAgw87eUYKnY7vFodlsTUA2E8uSxDmk6nPWySd0NKwD/flOP85MdEs9O
Ot+RoL4/J3IyNH+eg5kN68odmx4mAw8=
=ec8x
-----END PGP SIGNATURE-----
Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd updates from Jason Gunthorpe:
"Several new features and uAPI for iommufd:
- IOMMU_IOAS_MAP_FILE allows passing in a file descriptor as the
backing memory for an iommu mapping. To date VFIO/iommufd have used
VMA's and pin_user_pages(), this now allows using memfds and
memfd_pin_folios(). Notably this creates a pure folio path from the
memfd to the iommu page table where memory is never broken down to
PAGE_SIZE.
- IOMMU_IOAS_CHANGE_PROCESS moves the pinned page accounting between
two processes. Combined with the above this allows iommufd to
support a VMM re-start using exec() where something like qemu would
exec() a new version of itself and fd pass the memfds/iommufd/etc
to the new process. The memfd allows DMA access to the memory to
continue while the new process is getting setup, and the
CHANGE_PROCESS updates all the accounting.
- Support for fault reporting to userspace on non-PRI HW, such as ARM
stall-mode embedded devices.
- IOMMU_VIOMMU_ALLOC introduces the concept of a HW/driver backed
virtual iommu. This will be used by VMMs to access hardware
features that are contained with in a VM. The first use is to
inform the kernel of the virtual SID to physical SID mapping when
issuing SID based invalidation on ARM. Further uses will tie HW
features that are directly accessed by the VM, such as invalidation
queue assignment and others.
- IOMMU_VDEVICE_ALLOC informs the kernel about the mapping of virtual
device to physical device within a VIOMMU. Minimially this is used
to translate VM issued cache invalidation commands from virtual to
physical device IDs.
- Enhancements to IOMMU_HWPT_INVALIDATE and IOMMU_HWPT_ALLOC to work
with the VIOMMU
- ARM SMMuv3 support for nested translation. Using the VIOMMU and
VDEVICE the driver can model this HW's behavior for nested
translation. This includes a shared branch from Will"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd: (51 commits)
iommu/arm-smmu-v3: Import IOMMUFD module namespace
iommufd: IOMMU_IOAS_CHANGE_PROCESS selftest
iommufd: Add IOMMU_IOAS_CHANGE_PROCESS
iommufd: Lock all IOAS objects
iommufd: Export do_update_pinned
iommu/arm-smmu-v3: Support IOMMU_HWPT_INVALIDATE using a VIOMMU object
iommu/arm-smmu-v3: Allow ATS for IOMMU_DOMAIN_NESTED
iommu/arm-smmu-v3: Use S2FWB for NESTED domains
iommu/arm-smmu-v3: Support IOMMU_DOMAIN_NESTED
iommu/arm-smmu-v3: Support IOMMU_VIOMMU_ALLOC
Documentation: userspace-api: iommufd: Update vDEVICE
iommufd/selftest: Add vIOMMU coverage for IOMMU_HWPT_INVALIDATE ioctl
iommufd/selftest: Add IOMMU_TEST_OP_DEV_CHECK_CACHE test command
iommufd/selftest: Add mock_viommu_cache_invalidate
iommufd/viommu: Add iommufd_viommu_find_dev helper
iommu: Add iommu_copy_struct_from_full_user_array helper
iommufd: Allow hwpt_id to carry viommu_id for IOMMU_HWPT_INVALIDATE
iommu/viommu: Add cache_invalidate to iommufd_viommu_ops
iommufd/selftest: Add IOMMU_VDEVICE_ALLOC test coverage
iommufd/viommu: Add IOMMUFD_OBJ_VDEVICE and IOMMU_VDEVICE_ALLOC ioctl
...
|
||
|
Linus Torvalds
|
4e9ad033b4 |
ACPI updates for 6.13-rc1
- Fix _CPC register setting issue for registers located in memory in
the ACPI CPPC library code (Lifeng Zheng).
- Use DEFINE_SIMPLE_DEV_PM_OPS in the ACPI battery driver, make it use
devm_ for initializing mutexes and allocating driver data, and make
it check the register_pm_notifier() return value (Thomas Weißschuh,
Andy Shevchenko).
- Make the ACPI EC driver support compile-time conditional and allow
ACPI to be built without CONFIG_HAS_IOPORT (Arnd Bergmann).
- Remove a redundant error check from the pfr_telemetry driver (Colin
Ian King).
- Rearrange the processor_perflib code in the ACPI processor driver
to avoid compiling x86-specific code on other architectures (Arnd
Bergmann).
- Add adev NULL check to acpi_quirk_skip_serdev_enumeration() and
make UART skip quirks work on PCI UARTs without an UID (Hans de
Goede).
- Force native backlight handling Apple MacbookPro11,2 and Air7,2 in
the ACPI video driver (Jonathan Denose).
- Switch several ACPI platform drivers back to using struct
platform_driver::remove() (Uwe Kleine-König).
- Replace strcpy() with strscpy() in multiple places in the ACPI
subsystem (Muhammad Qasim Abdul Majeed, Abdul Rahim).
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmc3sGASHHJqd0Byand5
c29ja2kubmV0AAoJEILEb/54YlRxSJkP/i0bX629JC+K794y+a3m+3tDEFlBYnFA
fRD2mADWei2V7xQr3PnKIwcREEEv7Wx7RXAH01R8DFW9cMRWMsCY7nZWw4p4TofZ
TyaPhJAwzNqk+d1yfFgEXwsDiyDi9m8ozpYwUS2XCt7jDaBnBc5xEC/urVApEjbQ
AMPuGg5nB5BF+mv7Lik84EWwVcg9pYJ0XgWfQGevp3q9NXiBLx8LOT9V/bDkjdHH
yLaowfsdUUNJZULjtfi6pWEI8QfCoZwa7p+zWO0qzagPaK4F1nO0nD+553gpXegy
rP5PRimfiVpUmQfm8iYGFHpFr5j3RTOfDkEczdVkvnQkeA4IduN0QCtfEuXvUNuB
qGrqMkxjn4ji2xA74ujb9hnBKnNoRW8C2Y6/2OGZOpCq6enR1xQMItOFMuFhNnCP
ZGOm03o0m+wGJT3ObTAPVOX/JRwul47GbIdby7boS4wHnbKNY0CKHZWskBbTM6O5
IhmbMyGfNb4Rep7wTofAO/r8JWTxKdxa4OANsF94IsOP2+lLAOWcM0J6JjJ1X8DE
FunVckca8ocSoQj92S513knjpJXml54Bh7G+CLbpX8sZsdz05Ynq7T8Fr1uMI+HI
UEvTsfNGIYLVNea1gG6fYmj7owCu6v29zZKZTplaE3tC9O4FxysYt8Tcec3x2epy
5Q/OyydVEtTd
=ejtE
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These include a couple of fixes, a new ACPI backlight quirk for Apple
MacbookPro11,2 and Air7,2 and a bunch of cleanups:
- Fix _CPC register setting issue for registers located in memory in
the ACPI CPPC library code (Lifeng Zheng)
- Use DEFINE_SIMPLE_DEV_PM_OPS in the ACPI battery driver, make it
use devm_ for initializing mutexes and allocating driver data, and
make it check the register_pm_notifier() return value (Thomas
Weißschuh, Andy Shevchenko)
- Make the ACPI EC driver support compile-time conditional and allow
ACPI to be built without CONFIG_HAS_IOPORT (Arnd Bergmann)
- Remove a redundant error check from the pfr_telemetry driver (Colin
Ian King)
- Rearrange the processor_perflib code in the ACPI processor driver
to avoid compiling x86-specific code on other architectures (Arnd
Bergmann)
- Add adev NULL check to acpi_quirk_skip_serdev_enumeration() and
make UART skip quirks work on PCI UARTs without an UID (Hans de
Goede)
- Force native backlight handling Apple MacbookPro11,2 and Air7,2 in
the ACPI video driver (Jonathan Denose)
- Switch several ACPI platform drivers back to using struct
platform_driver::remove() (Uwe Kleine-König)
- Replace strcpy() with strscpy() in multiple places in the ACPI
subsystem (Muhammad Qasim Abdul Majeed, Abdul Rahim)"
* tag 'acpi-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (24 commits)
ACPI: video: force native for Apple MacbookPro11,2 and Air7,2
ACPI: CPPC: Fix _CPC register setting issue
ACPI: Switch back to struct platform_driver::remove()
ACPI: x86: Add adev NULL check to acpi_quirk_skip_serdev_enumeration()
ACPI: x86: Make UART skip quirks work on PCI UARTs without an UID
ACPI: allow building without CONFIG_HAS_IOPORT
ACPI: processor_perflib: extend X86 dependency
ACPI: scan: Use strscpy() instead of strcpy()
ACPI: SBSHC: Use strscpy() instead of strcpy()
ACPI: SBS: Use strscpy() instead of strcpy()
ACPI: power: Use strscpy() instead of strcpy()
ACPI: pci_root: Use strscpy() instead of strcpy()
ACPI: pci_link: Use strscpy() instead of strcpy()
ACPI: event: Use strscpy() instead of strcpy()
ACPI: EC: Use strscpy() instead of strcpy()
ACPI: APD: Use strscpy() instead of strcpy()
ACPI: thermal: Use strscpy() instead of strcpy()
ACPI: battery: Check for error code from devm_mutex_init() call
ACPI: EC: make EC support compile-time conditional
ACPI: pfr_telemetry: remove redundant error check on ret
...
|
||
|
Uwe Kleine-König
|
927df4cae3 |
ACPI: Switch back to struct platform_driver::remove()
After commit
|
||
|
Min-Hua Chen
|
f95382d73e |
acpi/arm64: remove unnecessary cast
DEFINE_RES_IRQ returns struct resource type, so it is unnecessary to cast it to struct resource. Remove the unnecessary cast to fix the following sparse warnings: drivers/acpi/arm64/gtdt.c:355:19: sparse: warning: cast to non-scalar drivers/acpi/arm64/gtdt.c:355:19: sparse: warning: cast from non-scalar No functional changes intended. Signed-off-by: Min-Hua Chen <minhuadotchen@gmail.com> Acked-by: Hanjun Guo <guohanjun@huawei.com> Reviewed-by: Hanjun Guo <guohanjun@huawei.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20240917233827.73167-1-minhuadotchen@gmail.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> |
||
|
Aleksandr Mishin
|
1a9de2f6fd |
acpi/arm64: Adjust error handling procedure in gtdt_parse_timer_block()
In case of error in gtdt_parse_timer_block() invalid 'gtdt_frame'
will be used in 'do {} while (i-- >= 0 && gtdt_frame--);' statement block
because do{} block will be executed even if 'i == 0'.
Adjust error handling procedure by replacing 'i-- >= 0' with 'i-- > 0'.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes:
|
||
|
Nicolin Chen
|
807404d66f |
ACPI/IORT: Support CANWBS memory access flag
The IORT spec, Issue E.f (April 2024), adds a new CANWBS bit to the Memory
Access Flag field in the Memory Access Properties table, mainly for a PCI
Root Complex.
This CANWBS defines the coherency of memory accesses to be not marked IOWB
cacheable/shareable. Its value further implies the coherency impact from a
pair of mismatched memory attributes (e.g. in a nested translation case):
0x0: Use of mismatched memory attributes for accesses made by this
device may lead to a loss of coherency.
0x1: Coherency of accesses made by this device to locations in
Conventional memory are ensured as follows, even if the memory
attributes for the accesses presented by the device or provided by
the SMMU are different from Inner and Outer Write-back cacheable,
Shareable.
Note that the loss of coherency on a CANWBS-unsupported HW typically could
occur to an SMMU that doesn't implement the S2FWB feature where additional
cache flush operations would be required to prevent that from happening.
Add a new ACPI_IORT_MF_CANWBS flag and set IOMMU_FWSPEC_PCI_RC_CANWBS upon
the presence of this new flag.
CANWBS and S2FWB are similar features, in that they both guarantee the VM
can not violate coherency, however S2FWB can be bypassed by PCI No Snoop
TLPs, while CANWBS cannot. Thus CANWBS meets the requirements to set
IOMMU_CAP_ENFORCE_CACHE_COHERENCY.
Architecturally ARM has expected that VFIO would disable No Snoop through
PCI Config space, if this is done then the two would have the same
protections.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Donald Dutile <ddutile@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/3-v4-9e99b76f3518+3a8-smmuv3_nesting_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
||
|
Zheng Zengkai
|
263e22d6bd |
ACPI: GTDT: Tighten the check for the array of platform timer structures
As suggested by Marc and Lorenzo, first we need to check whether the platform_timer entry pointer is within gtdt bounds (< gtdt_end) before de-referencing what it points at to detect the length of the platform timer struct and then check that the length of current platform_timer struct is also valid, i.e. the length is not zero and within gtdt_end. Now next_platform_timer() only checks against gtdt_end for the entry of subsequent platform timer without checking the length of it and will not report error if the check failed and the existing check in function acpi_gtdt_init() is also not enough. Modify the for_each_platform_timer() iterator and use it combined with a dedicated check function platform_timer_valid() to do the check against table length (gtdt_end) for each element of platform timer array in function acpi_gtdt_init(), making sure that both their entry and length actually fit in the table. Suggested-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Co-developed-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com> Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Hanjun Guo <guohanjun@huawei.com> Tested-by: Hanjun Guo <guohanjun@huawei.com> Link: https://lore.kernel.org/r/20241016095458.34126-1-zhengzengkai@huawei.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> |
||
|
Yicong Yang
|
f3b78b470f |
ACPI/IORT: Add PMCG platform information for HiSilicon HIP10/11
HiSilicon HIP10/11 platforms using the same SMMU PMCG with HIP09 and thus suffers the same erratum. List them in the PMCG platform information list without introducing a new SMMU PMCG Model. Update the silicon-errata.rst as well. Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Link: https://lore.kernel.org/r/20240731092658.11012-1-yangyicong@huawei.com Signed-off-by: Will Deacon <will@kernel.org> |
||
|
Andy Shevchenko
|
9cd8062b38 |
ACPI/IORT: Switch to use kmemdup_array()
Let the kememdup_array() take care about multiplication and possible overflows. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Hanjun Guo <guohanjun@huawei.com> Link: https://lore.kernel.org/r/20240606165005.3031490-1-andriy.shevchenko@linux.intel.com Signed-off-by: Will Deacon <will@kernel.org> |
||
|
Linus Torvalds
|
ebcfbf02ab |
IOMMU Updates for Linux v6.11
- Core:
* Support for the "ats-supported" device-tree property.
* Removal of the 'ops' field from 'struct iommu_fwspec'.
* Introduction of iommu_paging_domain_alloc() and partial conversion
of existing users.
* Introduce 'struct iommu_attach_handle' and provide corresponding
IOMMU interfaces which will be used by the IOMMUFD subsystem.
* Remove stale documentation.
* Add missing MODULE_DESCRIPTION() macro.
* Misc cleanups.
- Allwinner Sun50i:
* Ensure bypass mode is disabled on H616 SoCs.
* Ensure page-tables are allocated below 4GiB for the 32-bit
page-table walker.
* Add new device-tree compatible strings.
- AMD Vi:
* Use try_cmpxchg64() instead of cmpxchg64() when updating pte.
- Arm SMMUv2:
* Print much more useful information on context faults.
* Fix Qualcomm TBU probing when CONFIG_ARM_SMMU_QCOM_DEBUG=n.
* Add new Qualcomm device-tree bindings.
- Arm SMMUv3:
* Support for hardware update of access/dirty bits and reporting via
IOMMUFD.
* More driver rework from Jason, this time updating the PASID/SVA support
to prepare for full IOMMUFD support.
* Add missing MODULE_DESCRIPTION() macro.
* Minor fixes and cleanups.
- NVIDIA Tegra:
* Fix for benign fwspec initialisation issue exposed by rework on the
core branch.
- Intel VT-d:
* Use try_cmpxchg64() instead of cmpxchg64() when updating pte.
* Use READ_ONCE() to read volatile descriptor status.
* Remove support for handling Execute-Requested requests.
* Avoid calling iommu_domain_alloc().
* Minor fixes and refactoring.
- Qualcomm MSM:
* Updates to the device-tree bindings.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmaZTqMQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNApdB/wL2gW7ANJN3KDrOiWdq06P9fuzxbuiAegI
aKGH+aT05kJjLBXpAE5K9Bas0RbgN8iIB4TITDR9jyLnMOlTP3poy0fvB8y27q00
/WkQ7yVPkZc58ySdEOGH/EbuQkiXcD1YTjTGWP9071xzbWTDbsYN0smfbvvB9LgI
56KhdcUtB0QsqhqBzyyznHJLFdpVvDpbkiAFDXJfor7SNOOtV9a4Ect6IYteaYKz
S6+DWDEfUs+fHTEKEZ9sZVA745f2zPkT/YHY8vjLOEukWN07+3/2AKTra19DIgqF
HCGitRyZjOut1fg8sLn0SUliCKe/G/bHlwSbHnxJQ73b91YDvpzD
=xvLD
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu updates from Will Deacon:
"Core:
- Support for the "ats-supported" device-tree property
- Removal of the 'ops' field from 'struct iommu_fwspec'
- Introduction of iommu_paging_domain_alloc() and partial conversion
of existing users
- Introduce 'struct iommu_attach_handle' and provide corresponding
IOMMU interfaces which will be used by the IOMMUFD subsystem
- Remove stale documentation
- Add missing MODULE_DESCRIPTION() macro
- Misc cleanups
Allwinner Sun50i:
- Ensure bypass mode is disabled on H616 SoCs
- Ensure page-tables are allocated below 4GiB for the 32-bit
page-table walker
- Add new device-tree compatible strings
AMD Vi:
- Use try_cmpxchg64() instead of cmpxchg64() when updating pte
Arm SMMUv2:
- Print much more useful information on context faults
- Fix Qualcomm TBU probing when CONFIG_ARM_SMMU_QCOM_DEBUG=n
- Add new Qualcomm device-tree bindings
Arm SMMUv3:
- Support for hardware update of access/dirty bits and reporting via
IOMMUFD
- More driver rework from Jason, this time updating the PASID/SVA
support to prepare for full IOMMUFD support
- Add missing MODULE_DESCRIPTION() macro
- Minor fixes and cleanups
NVIDIA Tegra:
- Fix for benign fwspec initialisation issue exposed by rework on the
core branch
Intel VT-d:
- Use try_cmpxchg64() instead of cmpxchg64() when updating pte
- Use READ_ONCE() to read volatile descriptor status
- Remove support for handling Execute-Requested requests
- Avoid calling iommu_domain_alloc()
- Minor fixes and refactoring
Qualcomm MSM:
- Updates to the device-tree bindings"
* tag 'iommu-updates-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (72 commits)
iommu/tegra-smmu: Pass correct fwnode to iommu_fwspec_init()
iommu/vt-d: Fix identity map bounds in si_domain_init()
iommu: Move IOMMU_DIRTY_NO_CLEAR define
dt-bindings: iommu: Convert msm,iommu-v0 to yaml
iommu/vt-d: Fix aligned pages in calculate_psi_aligned_address()
iommu/vt-d: Limit max address mask to MAX_AGAW_PFN_WIDTH
docs: iommu: Remove outdated Documentation/userspace-api/iommu.rst
arm64: dts: fvp: Enable PCIe ATS for Base RevC FVP
iommu/of: Support ats-supported device-tree property
dt-bindings: PCI: generic: Add ats-supported property
iommu: Remove iommu_fwspec ops
OF: Simplify of_iommu_configure()
ACPI: Retire acpi_iommu_fwspec_ops()
iommu: Resolve fwspec ops automatically
iommu/mediatek-v1: Clean up redundant fwspec checks
RDMA/usnic: Use iommu_paging_domain_alloc()
wifi: ath11k: Use iommu_paging_domain_alloc()
wifi: ath10k: Use iommu_paging_domain_alloc()
drm/msm: Use iommu_paging_domain_alloc()
vhost-vdpa: Use iommu_paging_domain_alloc()
...
|
||
|
Robin Murphy
|
3f7c320916 |
iommu: Resolve fwspec ops automatically
There's no real need for callers to resolve ops from a fwnode in order to then pass both to iommu_fwspec_init() - it's simpler and more sensible for that to resolve the ops itself. This in turn means we can centralise the notion of checking for a present driver, and enforce that fwspecs aren't allocated unless and until we know they will be usable. Also use this opportunity to modernise with some "new" helpers that arrived shortly after this code was first written; the generic fwnode_handle_get() clears up that ugly get/put mismatch, while of_fwnode_handle() can now abstract those open-coded dereferences. Tested-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/0e2727adeb8cd73274425322f2f793561bdc927e.1719919669.git.robin.murphy@arm.com Signed-off-by: Will Deacon <will@kernel.org> |
||
|
Youwan Wang
|
bfe3f0df3e |
ACPI / amba: Drop unnecessary check for registered amba_dummy_clk
amba_register_dummy_clk() is called only once from acpi_amba_init() and acpi_amba_init() itself is called once during the initialisation. amba_dummy_clk can't be initialised before this in any other code path and hence the check for already registered amba_dummy_clk is not necessary. Drop the same. Signed-off-by: Youwan Wang <youwan@nfschina.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Hanjun Guo <guohanjun@huawei.com> Link: https://lore.kernel.org/r/20240624023101.369633-1-youwan@nfschina.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> |
||
|
Sudeep Holla
|
7a7a1cac3c |
arm64: FFH: Move ACPI specific code into drivers/acpi/arm64/
The ACPI FFH Opregion code can be moved out of arm64 arch code as it just uses SMCCC. Move all the ACPI FFH Opregion code into drivers/acpi/arm64/ffh.c Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Hanjun Guo <guohanjun@huawei.com> Link: https://lore.kernel.org/r/20240605131458.3341095-4-sudeep.holla@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> |
||
|
Sudeep Holla
|
99e7a8adc0 |
arm64: cpuidle: Move ACPI specific code into drivers/acpi/arm64/
The ACPI cpuidle LPI FFH code can be moved out of arm64 arch code as it just uses SMCCC. Move all the ACPI cpuidle LPI FFH code into drivers/acpi/arm64/cpuidle.c Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Hanjun Guo <guohanjun@huawei.com> Link: https://lore.kernel.org/r/20240605131458.3341095-3-sudeep.holla@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> |
||
|
Sudeep Holla
|
f8c6c92790 |
ACPI: arm64: Sort entries alphabetically
Sort the entries in the Makefile alphabetically. Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Hanjun Guo <guohanjun@huawei.com> Link: https://lore.kernel.org/r/20240605131458.3341095-2-sudeep.holla@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> |
||
|
Linus Torvalds
|
5f16eb0549 |
Char/Misc and other driver subsystem changes for 6.10-rc1
Here is the big set of char/misc and other driver subsystem updates for
6.10-rc1. Nothing major here, just lots of new drivers and updates for
apis and new hardware types. Included in here are:
- big IIO driver updates with more devices and drivers added
- fpga driver updates
- hyper-v driver updates
- uio_pruss driver removal, no one uses it, other drivers control the
same hardware now
- binder minor updates
- mhi driver updates
- excon driver updates
- counter driver updates
- accessability driver updates
- coresight driver updates
- other hwtracing driver updates
- nvmem driver updates
- slimbus driver updates
- spmi driver updates
- other smaller misc and char driver updates
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZk3lTg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynhZQCfSWyK0lHsys2LhEBmufrB3RCgnZwAn3Lm2eJY
WVk7h01A0lHyacrzm5LN
=s95M
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver subsystem updates from Greg KH:
"Here is the big set of char/misc and other driver subsystem updates
for 6.10-rc1. Nothing major here, just lots of new drivers and updates
for apis and new hardware types. Included in here are:
- big IIO driver updates with more devices and drivers added
- fpga driver updates
- hyper-v driver updates
- uio_pruss driver removal, no one uses it, other drivers control the
same hardware now
- binder minor updates
- mhi driver updates
- excon driver updates
- counter driver updates
- accessability driver updates
- coresight driver updates
- other hwtracing driver updates
- nvmem driver updates
- slimbus driver updates
- spmi driver updates
- other smaller misc and char driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (319 commits)
misc: ntsync: mark driver as "broken" to prevent from building
spmi: pmic-arb: Add multi bus support
spmi: pmic-arb: Register controller for bus instead of arbiter
spmi: pmic-arb: Make core resources acquiring a version operation
spmi: pmic-arb: Make the APID init a version operation
spmi: pmic-arb: Fix some compile warnings about members not being described
dt-bindings: spmi: Deprecate qcom,bus-id
dt-bindings: spmi: Add X1E80100 SPMI PMIC ARB schema
spmi: pmic-arb: Replace three IS_ERR() calls by null pointer checks in spmi_pmic_arb_probe()
spmi: hisi-spmi-controller: Do not override device identifier
dt-bindings: spmi: hisilicon,hisi-spmi-controller: clean up example
dt-bindings: spmi: hisilicon,hisi-spmi-controller: fix binding references
spmi: make spmi_bus_type const
extcon: adc-jack: Document missing struct members
extcon: realtek: Remove unused of_gpio.h
extcon: usbc-cros-ec: Convert to platform remove callback returning void
extcon: usb-gpio: Convert to platform remove callback returning void
extcon: max77843: Convert to platform remove callback returning void
extcon: max3355: Convert to platform remove callback returning void
extcon: intel-mrfld: Convert to platform remove callback returning void
...
|
||
|
Robin Murphy
|
fece6530bf |
dma-mapping: Add helpers for dma_range_map bounds
Several places want to compute the lower and/or upper bounds of a dma_range_map, so let's factor that out into reusable helpers. Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hanjun Guo <guohanjun@huawei.com> # For arm64 Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Tested-by: Hanjun Guo <guohanjun@huawei.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/45ec52f033ec4dfb364e23f48abaf787f612fa53.1713523152.git.robin.murphy@arm.com Signed-off-by: Joerg Roedel <jroedel@suse.de> |
||
|
Robin Murphy
|
91cfd679f9 |
ACPI/IORT: Handle memory address size limits as limits
Return the Root Complex/Named Component memory address size limit as an inclusive limit value, rather than an exclusive size. This saves having to fudge an off-by-one for the 64-bit case, and simplifies our caller. Acked-by: Hanjun Guo <guohanjun@huawei.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Tested-by: Hanjun Guo <guohanjun@huawei.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/284ae9fbadb12f2e3b5a30cd4d037d0e6843a8f4.1713523152.git.robin.murphy@arm.com Signed-off-by: Joerg Roedel <jroedel@suse.de> |
||
|
Anshuman Khandual
|
965edae4e6 |
coresight: debug: Move ACPI support from AMBA driver to platform driver
Add support for the cpu debug devices in a new platform driver, which can then be used on ACPI based platforms. This change would now allow runtime power management for ACPI based systems. The driver would try to enable the APB clock if available. But first this renames and then refactors debug_probe() and debug_remove(), making sure they can be used both for platform and AMBA drivers. Cc: Lorenzo Pieralisi <lpieralisi@kernel.org> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: James Clark <james.clark@arm.com> Cc: linux-acpi@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: coresight@lists.linaro.org Acked-by: Sudeep Holla <sudeep.holla@arm.com> # For ACPI related changes Reviewed-by: James Clark <james.clark@arm.com> Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20240314055843.2625883-12-anshuman.khandual@arm.com |
||
|
Anshuman Khandual
|
057256aaac |
coresight: stm: Move ACPI support from AMBA driver to platform driver
Add support for the stm devices in the platform driver, which can then be used on ACPI based platforms. This change would now allow runtime power management for ACPI based systems. The driver would try to enable the APB clock if available. But first this renames and then refactors stm_probe() and stm_remove(), making sure it can be used both for platform and AMBA drivers. Also this moves pm_runtime_put() from stm_probe() to the callers. Cc: Lorenzo Pieralisi <lpieralisi@kernel.org> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: James Clark <james.clark@arm.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: linux-acpi@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: coresight@lists.linaro.org Cc: linux-stm32@st-md-mailman.stormreply.com Tested-by: Sudeep Holla <sudeep.holla@arm.com> # Boot and driver probe only Acked-by: Sudeep Holla <sudeep.holla@arm.com> # For ACPI related changes Reviewed-by: James Clark <james.clark@arm.com> Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20240314055843.2625883-11-anshuman.khandual@arm.com |
||
|
Anshuman Khandual
|
70750e257a |
coresight: tmc: Move ACPI support from AMBA driver to platform driver
Add support for the tmc devices in the platform driver, which can then be used on ACPI based platforms. This change would now allow runtime power management for ACPI based systems. The driver would try to enable the APB clock if available. But first this renames and then refactors tmc_probe() and tmc_remove(), making sure it can be used both for platform and AMBA drivers. This also moves pm_runtime_put() from tmc_probe() to the callers. Cc: Lorenzo Pieralisi <lpieralisi@kernel.org> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: James Clark <james.clark@arm.com> Cc: linux-acpi@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: coresight@lists.linaro.org Tested-by: Sudeep Holla <sudeep.holla@arm.com> # Boot and driver probe only Acked-by: Sudeep Holla <sudeep.holla@arm.com> # For ACPI related changes Reviewed-by: James Clark <james.clark@arm.com> Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20240314055843.2625883-10-anshuman.khandual@arm.com |
||
|
Anshuman Khandual
|
3d83d4d490 |
coresight: tpiu: Move ACPI support from AMBA driver to platform driver
Add support for the tpiu device in the platform driver, which can then be used on ACPI based platforms. This change would now allow runtime power management for ACPI based systems. The driver would try to enable the APB clock if available. But first this renames and then refactors tpiu_probe() and tpiu_remove(), making sure it can be used both for platform and AMBA drivers. This also moves pm_runtime_put() from tpiu_probe() to the callers. While here, this also sorts the included headers in alphabetic order. Cc: Lorenzo Pieralisi <lpieralisi@kernel.org> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: James Clark <james.clark@arm.com> Cc: linux-acpi@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: coresight@lists.linaro.org Tested-by: Sudeep Holla <sudeep.holla@arm.com> # Boot and driver probe only Acked-by: Sudeep Holla <sudeep.holla@arm.com> # For ACPI related changes Reviewed-by: James Clark <james.clark@arm.com> Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20240314055843.2625883-9-anshuman.khandual@arm.com |
||
|
Anshuman Khandual
|
2356732385 |
coresight: catu: Move ACPI support from AMBA driver to platform driver
Add support for the catu devices in a new platform driver, which can then be used on ACPI based platforms. This change would now allow runtime power management for ACPI based systems. The driver would try to enable the APB clock if available. But first this renames and then refactors catu_probe() and catu_remove(), making sure it can be used both for platform and AMBA drivers. This also moves pm_runtime_put() from catu_probe() to the callers. Cc: Lorenzo Pieralisi <lpieralisi@kernel.org> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: James Clark <james.clark@arm.com> Cc: linux-acpi@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: coresight@lists.linaro.org Acked-by: Sudeep Holla <sudeep.holla@arm.com> # For ACPI related changes Reviewed-by: James Clark <james.clark@arm.com> Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20240314055843.2625883-8-anshuman.khandual@arm.com |
||
|
Anshuman Khandual
|
8e3227ddfb |
coresight: funnel: Move ACPI support from AMBA driver to platform driver
Add support for the dynamic funnel device in the platform driver, which can then be used on ACPI based platforms. This change would allow runtime power management for ACPI based systems. The driver would try to enable the APB clock if available. Also, rename the code to reflect the fact that it now handles both static and dynamic funnels. But first this refactors funnel_probe() making sure it can be used both for platform and AMBA drivers, by moving the pm_runtime_put() to the callers. Cc: Lorenzo Pieralisi <lpieralisi@kernel.org> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: James Clark <james.clark@arm.com> Cc: linux-acpi@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: coresight@lists.linaro.org Tested-by: Sudeep Holla <sudeep.holla@arm.com> # Boot and driver probe only Acked-by: Sudeep Holla <sudeep.holla@arm.com> # For ACPI related changes Reviewed-by: James Clark <james.clark@arm.com> Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20240314055843.2625883-7-anshuman.khandual@arm.com |
||
|
Anshuman Khandual
|
b448c4c72c |
coresight: replicator: Move ACPI support from AMBA driver to platform driver
Add support for the dynamic replicator device in the platform driver, which can then be used on ACPI based platforms. This change would now allow runtime power management for replicator devices on ACPI based systems. The driver would try to enable the APB clock if available. Also, rename the code to reflect the fact that it now handles both static and dynamic replicators. But first this refactors replicator_probe() making sure it can be used both for platform and AMBA drivers, by moving the pm_runtime_put() to the callers. Cc: Lorenzo Pieralisi <lpieralisi@kernel.org> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: James Clark <james.clark@arm.com> Cc: linux-acpi@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: coresight@lists.linaro.org Tested-by: Sudeep Holla <sudeep.holla@arm.com> # Boot and driver probe only Acked-by: Sudeep Holla <sudeep.holla@arm.com> # For ACPI related changes Reviewed-by: James Clark <james.clark@arm.com> Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20240314055843.2625883-6-anshuman.khandual@arm.com |
||
|
Uwe Kleine-König
|
10ff709a68 |
ACPI: AGDI: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Hanjun Guo <guohanjun@huawei.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Arnd Bergmann
|
ccb45b34d4 |
ACPI: arm64: export acpi_arch_thermal_cpufreq_pctg()
The cpufreq code can be in a loadable module, so the architecture support
for it has to be exported:
ERROR: modpost: "acpi_arch_thermal_cpufreq_pctg" [drivers/acpi/processor.ko] undefined!
Fixes:
|
||
|
Srikar Srimath Tirumala
|
310293a2b9 |
ACPI: processor: reduce CPUFREQ thermal reduction pctg for Tegra241
Current implementation of processor_thermal performs software throttling in fixed steps of "20%" which can be too coarse for some platforms. We observed some performance gain after reducing the throttle percentage. Change the CPUFREQ thermal reduction percentage and maximum thermal steps to be configurable. Also, update the default values of both for Nvidia Tegra241 (Grace) SoC. The thermal reduction percentage is reduced to "5%" and accordingly the maximum number of thermal steps are increased as they are derived from the reduction percentage. Signed-off-by: Srikar Srimath Tirumala <srikars@nvidia.com> Co-developed-by: Sumit Gupta <sumitg@nvidia.com> Signed-off-by: Sumit Gupta <sumitg@nvidia.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Hanjun Guo <guohanjun@huawei.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Andy Shevchenko
|
ca5a75df36 |
amba: bus: balance firmware node reference counting
Currently the ACPI code doesn't bump the reference count of the firmware node, while OF counter part does. Not that it's a problem right now, since ACPI doesn't really use the reference counting for firmware nodes, it still makes sense to make code robust against any changes done there. For this, - switch ACPI case to use device_set_node() to be unified with OF - move reference counting to amba_device_add() - switch to use firmware nodes instead of OF ones In the result we will have reference counting done in the same module for all callers independently on the nature of firmware node behind. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20231006145732.3419115-1-andriy.shevchenko@linux.intel.com Signed-off-by: Rob Herring <robh@kernel.org> |
||
|
Linus Torvalds
|
1c9f8dff62 |
Char/Misc driver changes for 6.6-rc1
Here is the big set of char/misc and other small driver subsystem changes for 6.6-rc1. Stuff all over the place here, lots of driver updates and changes and new additions. Short summary is: - new IIO drivers and updates - Interconnect driver updates - fpga driver updates and additions - fsi driver updates - mei driver updates - coresight driver updates - nvmem driver updates - counter driver updates - lots of smaller misc and char driver updates and additions All of these have been in linux-next for a long time with no reported problems. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZPH64g8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ynr2QCfd3RKeR+WnGzyEOFhksl30UJJhiIAoNZtYT5+ t9KG0iMDXRuTsOqeEQbd =tVnk -----END PGP SIGNATURE----- Merge tag 'char-misc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big set of char/misc and other small driver subsystem changes for 6.6-rc1. Stuff all over the place here, lots of driver updates and changes and new additions. Short summary is: - new IIO drivers and updates - Interconnect driver updates - fpga driver updates and additions - fsi driver updates - mei driver updates - coresight driver updates - nvmem driver updates - counter driver updates - lots of smaller misc and char driver updates and additions All of these have been in linux-next for a long time with no reported problems" * tag 'char-misc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (267 commits) nvmem: core: Notify when a new layout is registered nvmem: core: Do not open-code existing functions nvmem: core: Return NULL when no nvmem layout is found nvmem: core: Create all cells before adding the nvmem device nvmem: u-boot-env:: Replace zero-length array with DECLARE_FLEX_ARRAY() helper nvmem: sec-qfprom: Add Qualcomm secure QFPROM support dt-bindings: nvmem: sec-qfprom: Add bindings for secure qfprom dt-bindings: nvmem: Add compatible for QCM2290 nvmem: Kconfig: Fix typo "drive" -> "driver" nvmem: Explicitly include correct DT includes nvmem: add new NXP QorIQ eFuse driver dt-bindings: nvmem: Add t1023-sfp efuse support dt-bindings: nvmem: qfprom: Add compatible for MSM8226 nvmem: uniphier: Use devm_platform_get_and_ioremap_resource() nvmem: qfprom: do some cleanup nvmem: stm32-romem: Use devm_platform_get_and_ioremap_resource() nvmem: rockchip-efuse: Use devm_platform_get_and_ioremap_resource() nvmem: meson-mx-efuse: Convert to devm_platform_ioremap_resource() nvmem: lpc18xx_otp: Convert to devm_platform_ioremap_resource() nvmem: brcm_nvram: Use devm_platform_get_and_ioremap_resource() ... |
||
|
Linus Torvalds
|
330235e874 |
ACPI updates for 6.6-rc1
- Update the ACPICA code in the kernel to upstream revision 20230628
including the following changes:
* Suppress a GCC 12 dangling-pointer warning (Philip Prindeville).
* Reformat the ACPI_STATE_COMMON macro and its users (George Guo).
* Replace the ternary operator with ACPI_MIN() (Jiangshan Yi).
* Add support for _DSC as per ACPI 6.5 (Saket Dumbre).
* Remove a duplicate macro from zephyr header (Najumon B.A).
* Add data structures for GED and _EVT tracking (Jose Marinho).
* Fix misspelled CDAT DSMAS define (Dave Jiang).
* Simplify an error message in acpi_ds_result_push() (Christophe
Jaillet).
* Add a struct size macro related to SRAT (Dave Jiang).
* Add AML_NO_OPERAND_RESOLVE flag to Timer (Abhishek Mainkar).
* Add support for RISC-V external interrupt controllers in MADT (Sunil
V L).
* Add RHCT flags, CMO and MMU nodes (Sunil V L).
* Change ACPICA version to 20230628 (Bob Moore).
- Introduce new wrappers for ACPICA notify handler install/remove and
convert multiple drivers to using their own Notify() handlers instead
of the ACPI bus type .notify() slated for removal (Michal Wilczynski).
- Add backlight=native DMI quirk for Apple iMac12,1 and iMac12,2 (Hans
de Goede).
- Put ACPI video and its child devices explicitly into D0 on boot to
avoid platform firmware confusion (Kai-Heng Feng).
- Add backlight=native DMI quirk for Lenovo Ideapad Z470 (Jiri Slaby).
- Support obtaining physical CPU ID from MADT on LoongArch (Bibo Mao).
- Convert ACPI CPU initialization to using _OSC instead of _PDC that
has been depreceted since 2018 and dropped from the specification in
ACPI 6.5 (Michal Wilczynski, Rafael Wysocki).
- Drop non-functional nocrt parameter from ACPI thermal (Mario
Limonciello).
- Clean up the ACPI thermal driver, rework the handling of firmware
notifications in it and make it provide a table of generic trip point
structures to the core during initialization (Rafael Wysocki).
- Defer enumeration of devices with _DEP pointing to IVSC (Wentong Wu).
- Install SystemCMOS address space handler for ACPI000E (TAD) to meet
platform firmware expectations on some platforms (Zhang Rui).
- Fix finding the generic error data in the ACPi extlog driver for
compatibility with old and new firmware interface versions (Xiaochun
Lee).
- Remove assorted unused declarations of functions (Yue Haibing).
- Move AMBA bus scan handling into arm64 specific directory (Sudeep
Holla).
- Fix and clean up suspend-to-idle interface for AMD systems (Mario
Limonciello, Andy Shevchenko).
- Fix string truncation warning in pnpacpi_add_device() (Sunil V L).
-----BEGIN PGP SIGNATURE-----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=aXc6
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These include new ACPICA material, a rework of the ACPI thermal
driver, a switch-over of the ACPI processor driver to using _OSC
instead of (long deprecated) _PDC for CPU initialization, a rework of
firmware notifications handling in several drivers, fixes and cleanups
for suspend-to-idle handling on AMD systems, ACPI backlight driver
updates and more.
Specifics:
- Update the ACPICA code in the kernel to upstream revision 20230628
including the following changes:
- Suppress a GCC 12 dangling-pointer warning (Philip Prindeville)
- Reformat the ACPI_STATE_COMMON macro and its users (George Guo)
- Replace the ternary operator with ACPI_MIN() (Jiangshan Yi)
- Add support for _DSC as per ACPI 6.5 (Saket Dumbre)
- Remove a duplicate macro from zephyr header (Najumon B.A)
- Add data structures for GED and _EVT tracking (Jose Marinho)
- Fix misspelled CDAT DSMAS define (Dave Jiang)
- Simplify an error message in acpi_ds_result_push() (Christophe
Jaillet)
- Add a struct size macro related to SRAT (Dave Jiang)
- Add AML_NO_OPERAND_RESOLVE flag to Timer (Abhishek Mainkar)
- Add support for RISC-V external interrupt controllers in MADT
(Sunil V L)
- Add RHCT flags, CMO and MMU nodes (Sunil V L)
- Change ACPICA version to 20230628 (Bob Moore)
- Introduce new wrappers for ACPICA notify handler install/remove and
convert multiple drivers to using their own Notify() handlers
instead of the ACPI bus type .notify() slated for removal (Michal
Wilczynski)
- Add backlight=native DMI quirk for Apple iMac12,1 and iMac12,2
(Hans de Goede)
- Put ACPI video and its child devices explicitly into D0 on boot to
avoid platform firmware confusion (Kai-Heng Feng)
- Add backlight=native DMI quirk for Lenovo Ideapad Z470 (Jiri Slaby)
- Support obtaining physical CPU ID from MADT on LoongArch (Bibo Mao)
- Convert ACPI CPU initialization to using _OSC instead of _PDC that
has been depreceted since 2018 and dropped from the specification
in ACPI 6.5 (Michal Wilczynski, Rafael Wysocki)
- Drop non-functional nocrt parameter from ACPI thermal (Mario
Limonciello)
- Clean up the ACPI thermal driver, rework the handling of firmware
notifications in it and make it provide a table of generic trip
point structures to the core during initialization (Rafael Wysocki)
- Defer enumeration of devices with _DEP pointing to IVSC (Wentong
Wu)
- Install SystemCMOS address space handler for ACPI000E (TAD) to meet
platform firmware expectations on some platforms (Zhang Rui)
- Fix finding the generic error data in the ACPi extlog driver for
compatibility with old and new firmware interface versions
(Xiaochun Lee)
- Remove assorted unused declarations of functions (Yue Haibing)
- Move AMBA bus scan handling into arm64 specific directory (Sudeep
Holla)
- Fix and clean up suspend-to-idle interface for AMD systems (Mario
Limonciello, Andy Shevchenko)
- Fix string truncation warning in pnpacpi_add_device() (Sunil V L)"
* tag 'acpi-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (66 commits)
ACPI: x86: s2idle: Add a function to get LPS0 constraint for a device
ACPI: x86: s2idle: Add for_each_lpi_constraint() helper
ACPI: x86: s2idle: Add more debugging for AMD constraints parsing
ACPI: x86: s2idle: Fix a logic error parsing AMD constraints table
ACPI: x86: s2idle: Catch multiple ACPI_TYPE_PACKAGE objects
ACPI: x86: s2idle: Post-increment variables when getting constraints
ACPI: Adjust #ifdef for *_lps0_dev use
ACPI: TAD: Install SystemCMOS address space handler for ACPI000E
ACPI: Remove assorted unused declarations of functions
ACPI: extlog: Fix finding the generic error data for v3 structure
PNP: ACPI: Fix string truncation warning
ACPI: Remove unused extern declaration acpi_paddr_to_node()
ACPI: video: Add backlight=native DMI quirk for Apple iMac12,1 and iMac12,2
ACPI: video: Put ACPI video and its child devices into D0 on boot
ACPI: processor: LoongArch: Get physical ID from MADT
ACPI: scan: Defer enumeration of devices with a _DEP pointing to IVSC device
ACPI: thermal: Eliminate code duplication from acpi_thermal_notify()
ACPI: thermal: Drop unnecessary thermal zone callbacks
ACPI: thermal: Rework thermal_get_trend()
ACPI: thermal: Use trip point table to register thermal zones
...
|
||
|
Linus Torvalds
|
542034175c |
arm64 updates for 6.6
CPU features and system registers:
* Advertise hinted conditional branch support (FEAT_HBC) to
userspace
* Avoid false positive "SANITY CHECK" warning when xCR registers
differ outside of the length field
Documentation:
* Fix macro name typo in SME documentation
Entry code:
* Unmask exceptions earlier on the system call entry path
Memory management:
* Don't bother clearing PTE_RDONLY for dirty ptes in
pte_wrprotect() and pte_modify()
Perf and PMU drivers:
* Initial support for Coresight TRBE devices on ACPI systems (the
coresight driver changes will come later)
* Fix hw_breakpoint single-stepping when called from bpf
* Fixes for DDR PMU on i.MX8MP SoC
* Add NUMA-awareness to Hisilicon PCIe PMU driver
* Fix locking dependency issue in Arm DMC620 PMU driver
* Workaround Hisilicon erratum 162001900 in the SMMUv3 PMU driver
* Add support for Arm CMN-700 r3 parts to the CMN PMU driver
* Add support for recent Arm Cortex CPU PMUs
* Update Hisilicon PMU maintainers
Selftests:
* Add a bunch of new features to the hwcap test (JSCVT, PMULL,
AES, SHA1, etc)
* Fix SSVE test to leave streaming-mode after grabbing the
signal context
* Add new test for SVE vector-length changes with SME enabled
Miscellaneous:
* Allow compiler to warn on suspicious looking system register
expressions
* Work around SDEI firmware bug by aborting any running
handlers on a kernel crash
* Fix some harmless warnings when building with W=1
* Remove some unused function declarations
* Other minor fixes and cleanup
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmTon4QQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNG0nCAC9lTqppELnqXPA3FswONhtDBnKEufZHp0+
4+Z6CPjAYZpd7ruiezvxeZA62tZl3eX+tYOx+6lf4xYxFA5W/RQdmxM7e0mGJd+n
sgps85kxArApCgJR9zJiTCAIPXzKH5ObsFWWbcRljI9fiISVDTYn1JFAEx9UERI5
5yr6blYF2H115oD8V2f/0vVObGOAuiqNnzqJIuKL1I8H9xBK0pssrKvuCCN8J2o4
28+PeO7PzwWPiSfnO15bLd/bGuzbMCcexv4/DdjtLZaAanW7crJRVAzOon+URuVx
JXmkzQvXkOgSKnEFwfVRYTsUbtOz2cBafjSujVmjwIBymhbBCZR/
=WqmX
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"I think we have a bit less than usual on the architecture side, but
that's somewhat balanced out by a large crop of perf/PMU driver
updates and extensions to our selftests.
CPU features and system registers:
- Advertise hinted conditional branch support (FEAT_HBC) to userspace
- Avoid false positive "SANITY CHECK" warning when xCR registers
differ outside of the length field
Documentation:
- Fix macro name typo in SME documentation
Entry code:
- Unmask exceptions earlier on the system call entry path
Memory management:
- Don't bother clearing PTE_RDONLY for dirty ptes in pte_wrprotect()
and pte_modify()
Perf and PMU drivers:
- Initial support for Coresight TRBE devices on ACPI systems (the
coresight driver changes will come later)
- Fix hw_breakpoint single-stepping when called from bpf
- Fixes for DDR PMU on i.MX8MP SoC
- Add NUMA-awareness to Hisilicon PCIe PMU driver
- Fix locking dependency issue in Arm DMC620 PMU driver
- Workaround Hisilicon erratum 162001900 in the SMMUv3 PMU driver
- Add support for Arm CMN-700 r3 parts to the CMN PMU driver
- Add support for recent Arm Cortex CPU PMUs
- Update Hisilicon PMU maintainers
Selftests:
- Add a bunch of new features to the hwcap test (JSCVT, PMULL, AES,
SHA1, etc)
- Fix SSVE test to leave streaming-mode after grabbing the signal
context
- Add new test for SVE vector-length changes with SME enabled
Miscellaneous:
- Allow compiler to warn on suspicious looking system register
expressions
- Work around SDEI firmware bug by aborting any running handlers on a
kernel crash
- Fix some harmless warnings when building with W=1
- Remove some unused function declarations
- Other minor fixes and cleanup"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (62 commits)
drivers/perf: hisi: Update HiSilicon PMU maintainers
arm_pmu: acpi: Add a representative platform device for TRBE
arm_pmu: acpi: Refactor arm_spe_acpi_register_device()
kselftest/arm64: Fix hwcaps selftest build
hw_breakpoint: fix single-stepping when using bpf_overflow_handler
arm64/sysreg: refactor deprecated strncpy
kselftest/arm64: add jscvt feature to hwcap test
kselftest/arm64: add pmull feature to hwcap test
kselftest/arm64: add AES feature check to hwcap test
kselftest/arm64: add SHA1 and related features to hwcap test
arm64: sysreg: Generate C compiler warnings on {read,write}_sysreg_s arguments
kselftest/arm64: build BTI tests in output directory
perf/imx_ddr: don't enable counter0 if none of 4 counters are used
perf/imx_ddr: speed up overflow frequency of cycle
drivers/perf: hisi: Schedule perf session according to locality
kselftest/arm64: fix a memleak in zt_regs_run()
perf/arm-dmc620: Fix dmc620_pmu_irqs_lock/cpu_hotplug_lock circular lock dependency
perf/smmuv3: Add MODULE_ALIAS for module auto loading
perf/smmuv3: Enable HiSilicon Erratum 162001900 quirk for HIP08/09
kselftest/arm64: Size sycall-abi buffers for the actual maximum VL
...
|
||
|
Yicong Yang
|
0242737dc4 |
perf/smmuv3: Enable HiSilicon Erratum 162001900 quirk for HIP08/09
Some HiSilicon SMMU PMCG suffers the erratum 162001900 that the PMU disable control sometimes fail to disable the counters. This will lead to error or inaccurate data since before we enable the counters the counter's still counting for the event used in last perf session. This patch tries to fix this by hardening the global disable process. Before disable the PMU, writing an invalid event type (0xffff) to focibly stop the counters. Correspondingly restore each events on pmu::pmu_enable(). Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Link: https://lore.kernel.org/r/20230814124012.58013-1-yangyicong@huawei.com Signed-off-by: Will Deacon <will@kernel.org> |
||
|
Sudeep Holla
|
fc001b36e5 |
ACPI: Move AMBA bus scan handling into arm64 specific directory
Commit
|
||
|
Guanghui Feng
|
003e6b56d7 |
ACPI/IORT: Remove erroneous id_count check in iort_node_get_rmr_info()
According to the ARM IORT specifications DEN 0049 issue E,
the "Number of IDs" field in the ID mapping format reports
the number of IDs in the mapping range minus one.
In iort_node_get_rmr_info(), we erroneously skip ID mappings
whose "Number of IDs" equal to 0, resulting in valid mapping
nodes with a single ID to map being skipped, which is wrong.
Fix iort_node_get_rmr_info() by removing the bogus id_count
check.
Fixes:
|
||
|
Catalin Marinas
|
f42039d10b |
Merge branches 'for-next/kpti', 'for-next/missing-proto-warn', 'for-next/iss2-decode', 'for-next/kselftest', 'for-next/misc', 'for-next/feat_mops', 'for-next/module-alloc', 'for-next/sysreg', 'for-next/cpucap', 'for-next/acpi', 'for-next/kdump', 'for-next/acpi-doc', 'for-next/doc' and 'for-next/tpidr2-fix', remote-tracking branch 'arm64/for-next/perf' into for-next/core
* arm64/for-next/perf: docs: perf: Fix warning from 'make htmldocs' in hisi-pmu.rst docs: perf: Add new description for HiSilicon UC PMU drivers/perf: hisi: Add support for HiSilicon UC PMU driver drivers/perf: hisi: Add support for HiSilicon H60PA and PAv3 PMU driver perf: arm_cspmu: Add missing MODULE_DEVICE_TABLE perf/arm-cmn: Add sysfs identifier perf/arm-cmn: Revamp model detection perf/arm_dmc620: Add cpumask dt-bindings: perf: fsl-imx-ddr: Add i.MX93 compatible drivers/perf: imx_ddr: Add support for NXP i.MX9 SoC DDRC PMU driver perf/arm_cspmu: Decouple APMT dependency perf/arm_cspmu: Clean up ACPI dependency ACPI/APMT: Don't register invalid resource perf/arm_cspmu: Fix event attribute type perf: arm_cspmu: Set irq affinitiy only if overflow interrupt is used drivers/perf: hisi: Don't migrate perf to the CPU going to teardown drivers/perf: apple_m1: Force 63bit counters for M2 CPUs perf/arm-cmn: Fix DTC reset perf: qcom_l2_pmu: Make l2_cache_pmu_probe_cluster() more robust perf/arm-cci: Slightly optimize cci_pmu_sync_counters() * for-next/kpti: : Simplify KPTI trampoline exit code arm64: entry: Simplify tramp_alias macro and tramp_exit routine arm64: entry: Preserve/restore X29 even for compat tasks * for-next/missing-proto-warn: : Address -Wmissing-prototype warnings arm64: add alt_cb_patch_nops prototype arm64: move early_brk64 prototype to header arm64: signal: include asm/exception.h arm64: kaslr: add kaslr_early_init() declaration arm64: flush: include linux/libnvdimm.h arm64: module-plts: inline linux/moduleloader.h arm64: hide unused is_valid_bugaddr() arm64: efi: add efi_handle_corrupted_x18 prototype arm64: cpuidle: fix #ifdef for acpi functions arm64: kvm: add prototypes for functions called in asm arm64: spectre: provide prototypes for internal functions arm64: move cpu_suspend_set_dbg_restorer() prototype to header arm64: avoid prototype warnings for syscalls arm64: add scs_patch_vmlinux prototype arm64: xor-neon: mark xor_arm64_neon_*() static * for-next/iss2-decode: : Add decode of ISS2 to data abort reports arm64/esr: Add decode of ISS2 to data abort reporting arm64/esr: Use GENMASK() for the ISS mask * for-next/kselftest: : Various arm64 kselftest improvements kselftest/arm64: Log signal code and address for unexpected signals kselftest/arm64: Add a smoke test for ptracing hardware break/watch points * for-next/misc: : Miscellaneous patches arm64: alternatives: make clean_dcache_range_nopatch() noinstr-safe arm64: hibernate: remove WARN_ON in save_processor_state arm64/fpsimd: Exit streaming mode when flushing tasks arm64: mm: fix VA-range sanity check arm64/mm: remove now-superfluous ISBs from TTBR writes arm64: consolidate rox page protection logic arm64: set __exception_irq_entry with __irq_entry as a default arm64: syscall: unmask DAIF for tracing status arm64: lockdep: enable checks for held locks when returning to userspace arm64/cpucaps: increase string width to properly format cpucaps.h arm64/cpufeature: Use helper for ECV CNTPOFF cpufeature * for-next/feat_mops: : Support for ARMv8.8 memcpy instructions in userspace kselftest/arm64: add MOPS to hwcap test arm64: mops: allow disabling MOPS from the kernel command line arm64: mops: detect and enable FEAT_MOPS arm64: mops: handle single stepping after MOPS exception arm64: mops: handle MOPS exceptions KVM: arm64: hide MOPS from guests arm64: mops: don't disable host MOPS instructions from EL2 arm64: mops: document boot requirements for MOPS KVM: arm64: switch HCRX_EL2 between host and guest arm64: cpufeature: detect FEAT_HCX KVM: arm64: initialize HCRX_EL2 * for-next/module-alloc: : Make the arm64 module allocation code more robust (clean-up, VA range expansion) arm64: module: rework module VA range selection arm64: module: mandate MODULE_PLTS arm64: module: move module randomization to module.c arm64: kaslr: split kaslr/module initialization arm64: kasan: remove !KASAN_VMALLOC remnants arm64: module: remove old !KASAN_VMALLOC logic * for-next/sysreg: (21 commits) : More sysreg conversions to automatic generation arm64/sysreg: Convert TRBIDR_EL1 register to automatic generation arm64/sysreg: Convert TRBTRG_EL1 register to automatic generation arm64/sysreg: Convert TRBMAR_EL1 register to automatic generation arm64/sysreg: Convert TRBSR_EL1 register to automatic generation arm64/sysreg: Convert TRBBASER_EL1 register to automatic generation arm64/sysreg: Convert TRBPTR_EL1 register to automatic generation arm64/sysreg: Convert TRBLIMITR_EL1 register to automatic generation arm64/sysreg: Rename TRBIDR_EL1 fields per auto-gen tools format arm64/sysreg: Rename TRBTRG_EL1 fields per auto-gen tools format arm64/sysreg: Rename TRBMAR_EL1 fields per auto-gen tools format arm64/sysreg: Rename TRBSR_EL1 fields per auto-gen tools format arm64/sysreg: Rename TRBBASER_EL1 fields per auto-gen tools format arm64/sysreg: Rename TRBPTR_EL1 fields per auto-gen tools format arm64/sysreg: Rename TRBLIMITR_EL1 fields per auto-gen tools format arm64/sysreg: Convert OSECCR_EL1 to automatic generation arm64/sysreg: Convert OSDTRTX_EL1 to automatic generation arm64/sysreg: Convert OSDTRRX_EL1 to automatic generation arm64/sysreg: Convert OSLAR_EL1 to automatic generation arm64/sysreg: Standardise naming of bitfield constants in OSL[AS]R_EL1 arm64/sysreg: Convert MDSCR_EL1 to automatic register generation ... * for-next/cpucap: : arm64 cpucap clean-up arm64: cpufeature: fold cpus_set_cap() into update_cpu_capabilities() arm64: cpufeature: use cpucap naming arm64: alternatives: use cpucap naming arm64: standardise cpucap bitmap names * for-next/acpi: : Various arm64-related ACPI patches ACPI: bus: Consolidate all arm specific initialisation into acpi_arm_init() * for-next/kdump: : Simplify the crashkernel reservation behaviour of crashkernel=X,high on arm64 arm64: add kdump.rst into index.rst Documentation: add kdump.rst to present crashkernel reservation on arm64 arm64: kdump: simplify the reservation behaviour of crashkernel=,high * for-next/acpi-doc: : Update ACPI documentation for Arm systems Documentation/arm64: Update ACPI tables from BBR Documentation/arm64: Update references in arm-acpi Documentation/arm64: Update ARM and arch reference * for-next/doc: : arm64 documentation updates Documentation/arm64: Add ptdump documentation * for-next/tpidr2-fix: : Fix the TPIDR2_EL0 register restoring on sigreturn kselftest/arm64: Add a test case for TPIDR2 restore arm64/signal: Restore TPIDR2 register rather than memory state |
||
|
Robin Murphy
|
87b3b6d53e |
ACPI/APMT: Don't register invalid resource
Don't register a resource for the second page unless the dual-page extension flag is actually present to say it's valid. CC: Lorenzo Pieralisi <lpieralisi@kernel.org> CC: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Reviewed-by: Hanjun Guo <guohanjun@huawei.com> Reviewed-and-tested-by: Ilkka Koskinen <ilkka@os.amperecomputing.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Link: https://lore.kernel.org/r/63b34656e1f7b41bcb458fb6d7496e04db757e0d.1685983270.git.robin.murphy@arm.com Signed-off-by: Will Deacon <will@kernel.org> |
||
|
Sudeep Holla
|
fcea0ccf4f |
ACPI: bus: Consolidate all arm specific initialisation into acpi_arm_init()
Move all of the ARM-specific initialization into one function namely acpi_arm_init(), so it is not necessary to modify/update bus.c every time a new piece of it is added. Cc: Lorenzo Pieralisi <lpieralisi@kernel.org> Cc: Rafael J. Wysocki <rafael@kernel.org> Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Hanjun Guo <guohanjun@huawei.com> Link: https://lore.kernel.org/r/CAJZ5v0iBZRZmV_oU+VurqxnVMbFN_ttqrL=cLh0sUH+=u0PYsw@mail.gmail.com Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Acked-by: Rafael J. Wysocki <rafael@kernel.org> Reviewed-by: Shaoqin Huang <shahuang@redhat.com> Link: https://lore.kernel.org/r/20230606093531.2746732-1-sudeep.holla@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> |
||
|
Uwe Kleine-König
|
858a56630a |
ACPI: AGDI: Improve error reporting for problems during .remove()
Returning an error value in a platform driver's remove callback results in a generic error message being emitted by the driver core, but otherwise it doesn't make a difference. The device goes away anyhow. So instead of triggering the generic platform error message, emit a more helpful message if a problem occurs and return 0 to suppress the generic message. This patch is a preparation for making platform remove callbacks return void. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Link: https://lore.kernel.org/r/20221014160623.467195-1-u.kleine-koenig@pengutronix.de Signed-off-by: Will Deacon <will@kernel.org> |
||
|
Besar Wicaksono
|
3952203179 |
ACPI: APMT: Fix kerneldoc and indentation
Add missing kerneldoc and fix alignment on one of the arguments of apmt_add_platform_device function. Signed-off-by: Besar Wicaksono <bwicaksono@nvidia.com> Link: https://lore.kernel.org/r/20221111234323.16182-1-bwicaksono@nvidia.com [will: Fixed up additional indentation issue] Signed-off-by: Will Deacon <will@kernel.org> |
||
|
Robin Murphy
|
05da178ce0 |
ACPI/IORT: Update SMMUv3 DeviceID support
IORT E.e now allows SMMUv3 nodes to describe the DeviceID for MSIs independently of wired GSIVs, where the previous oddly-restrictive definition meant that an SMMU without PRI support had to provide a DeviceID even if it didn't support MSIs either. Support this, with the usual temporary flag definition while the real one is making its way through ACPICA. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Tested-by: Nicolin Chen <nicolinc@nvidia.com> Reviewed-by: Nicolin Chen <nicolinc@nvidia.com> Link: https://lore.kernel.org/r/4b3e2ead4f392d1a47a7528da119d57918e5d806.1664392886.git.robin.murphy@arm.com Signed-off-by: Will Deacon <will@kernel.org> |
||
|
Besar Wicaksono
|
6251d38059 |
ACPI: ARM Performance Monitoring Unit Table (APMT) initial support
ARM Performance Monitoring Unit Table describes the properties of PMU support in ARM-based system. The APMT table contains a list of nodes, each represents a PMU in the system that conforms to ARM CoreSight PMU architecture. The properties of each node include information required to access the PMU (e.g. MMIO base address, interrupt number) and also identification. For more detailed information, please refer to the specification below: * APMT: https://developer.arm.com/documentation/den0117/latest * ARM Coresight PMU: https://developer.arm.com/documentation/ihi0091/latest The initial support adds the detection of APMT table and generic infrastructure to create platform devices for ARM CoreSight PMUs. Similar to IORT the root pointer of APMT is preserved during runtime and each PMU platform device is given a pointer to the corresponding APMT node. Signed-off-by: Besar Wicaksono <bwicaksono@nvidia.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Link: https://lore.kernel.org/r/20220929002834.32664-1-bwicaksono@nvidia.com Signed-off-by: Will Deacon <will@kernel.org> |
||
|
Lu Baolu
|
0251d0107c |
iommu: Add gfp parameter to iommu_alloc_resv_region
Add gfp parameter to iommu_alloc_resv_region() for the callers to specify the memory allocation behavior. Thus iommu_alloc_resv_region() could also be available in critical contexts. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Tested-by: Alex Williamson <alex.williamson@redhat.com> Link: https://lore.kernel.org/r/20220927053109.4053662-2-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de> |
||
|
Jianmin Lv
|
bf2ee8d0c3 |
ACPI: scan: Support multiple DMA windows with different offsets
In DT systems configurations, of_dma_get_range() returns struct bus_dma_region DMA regions; they are used to set-up devices DMA windows with different offset available for translation between DMA address and CPU address. In ACPI systems configuration, acpi_dma_get_range() does not return DMA regions yet and that precludes setting up the dev->dma_range_map pointer and therefore DMA regions with multiple offsets. Update acpi_dma_get_range() to return struct bus_dma_region DMA regions like of_dma_get_range() does. After updating acpi_dma_get_range(), acpi_arch_dma_setup() is changed for ARM64, where the original dma_addr and size are removed as these arguments are now redundant, and pass 0 and U64_MAX for dma_base and size of arch_setup_dma_ops; this is a simplification consistent with what other ACPI architectures also pass to iommu_setup_dma_ops(). Reviewed-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn> Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Ren Zhijie
|
de0269765b |
ACPI/IORT: Fix build error implicit-function-declaration
If CONFIG_ACPI_IORT=y and CONFIG_IOMMU_API is not set,
make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu-,
will be failed, like this:
drivers/acpi/arm64/iort.c: In function ‘iort_get_rmr_sids’:
drivers/acpi/arm64/iort.c:1406:2: error: implicit declaration of function ‘iort_iommu_rmr_get_resv_regions’; did you mean ‘iort_iommu_get_resv_regions’? [-Werror=implicit-function-declaration]
iort_iommu_rmr_get_resv_regions(iommu_fwnode, NULL, head);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
iort_iommu_get_resv_regions
cc1: some warnings being treated as errors
make[3]: *** [drivers/acpi/arm64/iort.o] Error 1
The function iort_iommu_rmr_get_resv_regions()
is declared under CONFIG_IOMMU_API,
and the callers of iort_get_rmr_sids() and iort_put_rmr_sids()
would select IOMMU_API.
To fix this error, move the definitions to #ifdef CONFIG_IOMMU_API.
Fixes:
|