When multiple ERT_START_NPU commands are combined in one buffer, the
buffer size calculation is incorrect. Also, the condition to make sure
the buffer size is not beyond 4K is also fixed.
Fixes: aac243092b ("accel/amdxdna: Add command execution")
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/20250409210013.10854-1-lizhi.hou@amd.com
For input ioctl structures, it is better to check if the pad is zero.
Thus, the pad bytes might be usable in the future.
Suggested-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241217165446.2607585-1-lizhi.hou@amd.com
The latest released firmware supports reading firmware interface version
from registers directly. The driver's probe routine reads the major and
minor version numbers. If the firmware interface is not compatible with
the driver, the driver's probe routine returns failure.
Co-developed-by: Min Ma <min.ma@amd.com>
Signed-off-by: Min Ma <min.ma@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241213232933.1545388-5-lizhi.hou@amd.com
Add SET_STATE ioctl to configure device power mode for aie2 device.
Three modes are supported initially.
POWER_MODE_DEFAULT: Enable clock gating and set DPM (Dynamic Power
Management) level to value which has been set by resource solver or
maximum DPM level the device supports.
POWER_MODE_HIGH: Enable clock gating and set DPM level to maximum DPM
level the device supports.
POWER_MODE_TURBO: Disable clock gating and set DPM level to maximum DPM
level the device supports.
Disabling clock gating means all clocks always run on full speed. And
the different clock frequency are used based on DPM level been set.
Initially, the driver set the power mode to default mode.
Co-developed-by: Narendra Gutta <VenkataNarendraKumar.Gutta@amd.com>
Signed-off-by: Narendra Gutta <VenkataNarendraKumar.Gutta@amd.com>
Co-developed-by: George Yang <George.Yang@amd.com>
Signed-off-by: George Yang <George.Yang@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241213232933.1545388-4-lizhi.hou@amd.com
Switch mailbox message id and hardware context id management over from
the idr api to the xarray api.
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241213232933.1545388-3-lizhi.hou@amd.com
Add GET_INFO ioctl to retrieve hardware information, including
AIE, clock, hardware context etc.
Co-developed-by: Min Ma <min.ma@amd.com>
Signed-off-by: Min Ma <min.ma@amd.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241118172942.2014541-11-lizhi.hou@amd.com
When there is a hardware error, the NPU firmware notifies the host through
a mailbox message. The message includes details of the error, such as the
tile and column indexes where the error occurred.
The driver starts a thread to handle the NPU error message. The thread
stops the clients which are using the column where error occurred. Then
the driver resets that column.
Co-developed-by: Min Ma <min.ma@amd.com>
Signed-off-by: Min Ma <min.ma@amd.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241118172942.2014541-10-lizhi.hou@amd.com
Add interfaces for user application to submit command and wait for its
completion.
Co-developed-by: Min Ma <min.ma@amd.com>
Signed-off-by: Min Ma <min.ma@amd.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241118172942.2014541-8-lizhi.hou@amd.com
There different types of BOs are supported:
- shmem
A user application uses shmem BOs as input/output for its workload running
on NPU.
- device memory heap
The fixed size buffer dedicated to the device.
- device buffer
The buffer object allocated from device memory heap.
- command buffer
The buffer object created for delivering commands. The command buffer
object is small and pinned on creation.
New IOCTLs are added: CREATE_BO, GET_BO_INFO, SYNC_BO. SYNC_BO is used
to explicitly flush CPU cache for BO memory.
Co-developed-by: Min Ma <min.ma@amd.com>
Signed-off-by: Min Ma <min.ma@amd.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241118172942.2014541-7-lizhi.hou@amd.com
The hardware can be shared among multiple user applications. The
hardware resources are allocated/freed based on the request from
user application via driver IOCTLs.
DRM_IOCTL_AMDXDNA_CREATE_HWCTX
Allocate tile columns and create a hardware context structure to track the
usage and status of the resources. A hardware context ID is returned for
XDNA command execution.
DRM_IOCTL_AMDXDNA_DESTROY_HWCTX
Release hardware context based on its ID. The tile columns belong to
this hardware context will be reclaimed.
DRM_IOCTL_AMDXDNA_CONFIG_HWCTX
Config hardware context. Bind the hardware context to the required
resources.
Co-developed-by: Min Ma <min.ma@amd.com>
Signed-off-by: Min Ma <min.ma@amd.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241118172942.2014541-6-lizhi.hou@amd.com
The hardware mailboxes are used by the driver to submit requests to
firmware and receive the completion notices from hardware.
Initially, a management mailbox channel is up and running. The driver may
request firmware to create/destroy more channels dynamically through
management channel.
Add driver internal mailbox interfaces.
- create/destroy a mailbox channel instance
- send a message to the firmware through a specific channel
- wait for a notification from the specific channel
Co-developed-by: George Yang <George.Yang@amd.com>
Signed-off-by: George Yang <George.Yang@amd.com>
Co-developed-by: Min Ma <min.ma@amd.com>
Signed-off-by: Min Ma <min.ma@amd.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241118172942.2014541-4-lizhi.hou@amd.com
