The oversampling rate used by the Jitter RNG allows the configuration of
the heuristically implied entropy in one timing measurement. This
entropy rate is (1 / OSR) bits of entropy per time stamp.
Considering that the Jitter RNG now support APT/RCT health tests for
different OSRs, allow this value to be configured at compile time to
support systems with limited amount of entropy in their timer.
The allowed range of OSR values complies with the APT/RCT cutoff health
test values which range from 1 through 15.
The default value of the OSR selection support is left at 1 which is the
current default. Thus, the addition of the configuration support does
not alter the default Jitter RNG behavior.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The memory size consumed by the Jitter RNG is one contributing factor in
the amount of entropy that is gathered. As the amount of entropy
directly correlates with the distance of the memory from the CPU, the
caches that are possibly present on a given system have an impact on the
collected entropy.
Thus, the kernel compile time should offer a means to configure the
amount of memory used by the Jitter RNG. Although this option could be
turned into a runtime option (e.g. a kernel command line option), it
should remain a compile time option as otherwise adminsitrators who may
not have performed an entropy assessment may select a value that is
inappropriate.
The default value selected by the configuration is identical to the
current Jitter RNG value. Thus, the patch should not lead to any change
in the Jitter RNG behavior.
To accommodate larger memory buffers, kvzalloc / kvfree is used.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Split out the sign/verify functionality from the existing akcipher
interface. Most algorithms in akcipher either support encryption
and decryption, or signing and verify. Only one supports both.
As a signature algorithm may not support encryption at all, these
two should be spearated.
For now sig is simply a wrapper around akcipher as all algorithms
remain unchanged. This is a first step and allows users to start
allocating sig instead of akcipher.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Give geniv its own Kconfig option so that its dependencies are
distinct from that of the AEAD API code. This also allows it
to be disabled if no IV generators (seqiv/echainiv) are enabled.
Remove the obsolete select on RNG2 by SKCIPHER2 as skcipher IV
generators disappeared long ago.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The testmgr code uses crypto_rng without depending on it. Add
an explicit dependency to Kconfig.
Also sort the MANAGER2 dependencies alphabetically.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Make the help text for CRYPTO_STATS explicitly mention that it reduces
the performance of the crypto API.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The test interface allows a privileged process to capture the raw
unconditioned noise that is collected by the Jitter RNG for statistical
analysis. Such testing allows the analysis how much entropy
the Jitter RNG noise source provides on a given platform. The obtained
data is the time stamp sampled by the Jitter RNG. Considering that
the Jitter RNG inserts the delta of this time stamp compared to the
immediately preceding time stamp, the obtained data needs to be
post-processed accordingly to obtain the data the Jitter RNG inserts
into its entropy pool.
The raw entropy collection is provided to obtain the raw unmodified
time stamps that are about to be added to the Jitter RNG entropy pool
and are credited with entropy. Thus, this patch adds an interface
which renders the Jitter RNG insecure. This patch is NOT INTENDED
FOR PRODUCTION SYSTEMS, but solely for development/test systems to
verify the available entropy rate.
Access to the data is given through the jent_raw_hires debugfs file.
The data buffer should be multiples of sizeof(u32) to fill the entire
buffer. Using the option jitterentropy_testing.boot_raw_hires_test=1
the raw noise of the first 1000 entropy events since boot can be
sampled.
This test interface allows generating the data required for
analysis whether the Jitter RNG is in compliance with SP800-90B
sections 3.1.3 and 3.1.4.
If the test interface is not compiled, its code is a noop which has no
impact on the performance.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Using the kernel crypto API, the SHA3-256 algorithm is used as
conditioning element to replace the LFSR in the Jitter RNG. All other
parts of the Jitter RNG are unchanged.
The application and use of the SHA-3 conditioning operation is identical
to the user space Jitter RNG 3.4.0 by applying the following concept:
- the Jitter RNG initializes a SHA-3 state which acts as the "entropy
pool" when the Jitter RNG is allocated.
- When a new time delta is obtained, it is inserted into the "entropy
pool" with a SHA-3 update operation. Note, this operation in most of
the cases is a simple memcpy() onto the SHA-3 stack.
- To cause a true SHA-3 operation for each time delta operation, a
second SHA-3 operation is performed hashing Jitter RNG status
information. The final message digest is also inserted into the
"entropy pool" with a SHA-3 update operation. Yet, this data is not
considered to provide any entropy, but it shall stir the entropy pool.
- To generate a random number, a SHA-3 final operation is performed to
calculate a message digest followed by an immediate SHA-3 init to
re-initialize the "entropy pool". The obtained message digest is one
block of the Jitter RNG that is returned to the caller.
Mathematically speaking, the random number generated by the Jitter RNG
is:
aux_t = SHA-3(Jitter RNG state data)
Jitter RNG block = SHA-3(time_i || aux_i || time_(i-1) || aux_(i-1) ||
... || time_(i-255) || aux_(i-255))
when assuming that the OSR = 1, i.e. the default value.
This operation implies that the Jitter RNG has an output-blocksize of
256 bits instead of the 64 bits of the LFSR-based Jitter RNG that is
replaced with this patch.
The patch also replaces the varying number of invocations of the
conditioning function with one fixed number of invocations. The use
of the conditioning function consistent with the userspace Jitter RNG
library version 3.4.0.
The code is tested with a system that exhibited the least amount of
entropy generated by the Jitter RNG: the SiFive Unmatched RISC-V
system. The measured entropy rate is well above the heuristically
implied entropy value of 1 bit of entropy per time delta. On all other
tested systems, the measured entropy rate is even higher by orders
of magnitude. The measurement was performed using updated tooling
provided with the user space Jitter RNG library test framework.
The performance of the Jitter RNG with this patch is about en par
with the performance of the Jitter RNG without the patch.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
With a blatant copy of some MIPS bits we introduce the crc32 and crc32c
hw accelerated module to LoongArch.
LoongArch has provided these instructions to calculate crc32 and crc32c:
* crc.w.b.w crcc.w.b.w
* crc.w.h.w crcc.w.h.w
* crc.w.w.w crcc.w.w.w
* crc.w.d.w crcc.w.d.w
So we can make use of these instructions to improve the performance of
calculation for crc32(c) checksums.
As can be seen from the following test results, crc32(c) instructions
can improve the performance by 58%.
Software implemention Hardware acceleration
Buffer size time cost (seconds) time cost (seconds) Accel.
100 KB 0.000845 0.000534 59.1%
1 MB 0.007758 0.004836 59.4%
10 MB 0.076593 0.047682 59.4%
100 MB 0.756734 0.479126 58.5%
1000 MB 7.563841 4.778266 58.5%
Signed-off-by: Min Zhou <zhoumin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The gf128mul library does not depend on the crypto API at all, so it can
be moved into lib/crypto. This will allow us to use it in other library
code in a subsequent patch without having to depend on CONFIG_CRYPTO.
While at it, change the Kconfig symbol name to align with other crypto
library implementations. However, the source file name is retained, as
it is reflected in the module .ko filename, and changing this might
break things for users.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
linux-next for a couple of months without, to my knowledge, any negative
reports (or any positive ones, come to that).
- Also the Maple Tree from Liam R. Howlett. An overlapping range-based
tree for vmas. It it apparently slight more efficient in its own right,
but is mainly targeted at enabling work to reduce mmap_lock contention.
Liam has identified a number of other tree users in the kernel which
could be beneficially onverted to mapletrees.
Yu Zhao has identified a hard-to-hit but "easy to fix" lockdep splat
(https://lkml.kernel.org/r/CAOUHufZabH85CeUN-MEMgL8gJGzJEWUrkiM58JkTbBhh-jew0Q@mail.gmail.com).
This has yet to be addressed due to Liam's unfortunately timed
vacation. He is now back and we'll get this fixed up.
- Dmitry Vyukov introduces KMSAN: the Kernel Memory Sanitizer. It uses
clang-generated instrumentation to detect used-unintialized bugs down to
the single bit level.
KMSAN keeps finding bugs. New ones, as well as the legacy ones.
- Yang Shi adds a userspace mechanism (madvise) to induce a collapse of
memory into THPs.
- Zach O'Keefe has expanded Yang Shi's madvise(MADV_COLLAPSE) to support
file/shmem-backed pages.
- userfaultfd updates from Axel Rasmussen
- zsmalloc cleanups from Alexey Romanov
- cleanups from Miaohe Lin: vmscan, hugetlb_cgroup, hugetlb and memory-failure
- Huang Ying adds enhancements to NUMA balancing memory tiering mode's
page promotion, with a new way of detecting hot pages.
- memcg updates from Shakeel Butt: charging optimizations and reduced
memory consumption.
- memcg cleanups from Kairui Song.
- memcg fixes and cleanups from Johannes Weiner.
- Vishal Moola provides more folio conversions
- Zhang Yi removed ll_rw_block() :(
- migration enhancements from Peter Xu
- migration error-path bugfixes from Huang Ying
- Aneesh Kumar added ability for a device driver to alter the memory
tiering promotion paths. For optimizations by PMEM drivers, DRM
drivers, etc.
- vma merging improvements from Jakub Matěn.
- NUMA hinting cleanups from David Hildenbrand.
- xu xin added aditional userspace visibility into KSM merging activity.
- THP & KSM code consolidation from Qi Zheng.
- more folio work from Matthew Wilcox.
- KASAN updates from Andrey Konovalov.
- DAMON cleanups from Kaixu Xia.
- DAMON work from SeongJae Park: fixes, cleanups.
- hugetlb sysfs cleanups from Muchun Song.
- Mike Kravetz fixes locking issues in hugetlbfs and in hugetlb core.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY0HaPgAKCRDdBJ7gKXxA
joPjAQDZ5LlRCMWZ1oxLP2NOTp6nm63q9PWcGnmY50FjD/dNlwEAnx7OejCLWGWf
bbTuk6U2+TKgJa4X7+pbbejeoqnt5QU=
=xfWx
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2022-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Yu Zhao's Multi-Gen LRU patches are here. They've been under test in
linux-next for a couple of months without, to my knowledge, any
negative reports (or any positive ones, come to that).
- Also the Maple Tree from Liam Howlett. An overlapping range-based
tree for vmas. It it apparently slightly more efficient in its own
right, but is mainly targeted at enabling work to reduce mmap_lock
contention.
Liam has identified a number of other tree users in the kernel which
could be beneficially onverted to mapletrees.
Yu Zhao has identified a hard-to-hit but "easy to fix" lockdep splat
at [1]. This has yet to be addressed due to Liam's unfortunately
timed vacation. He is now back and we'll get this fixed up.
- Dmitry Vyukov introduces KMSAN: the Kernel Memory Sanitizer. It uses
clang-generated instrumentation to detect used-unintialized bugs down
to the single bit level.
KMSAN keeps finding bugs. New ones, as well as the legacy ones.
- Yang Shi adds a userspace mechanism (madvise) to induce a collapse of
memory into THPs.
- Zach O'Keefe has expanded Yang Shi's madvise(MADV_COLLAPSE) to
support file/shmem-backed pages.
- userfaultfd updates from Axel Rasmussen
- zsmalloc cleanups from Alexey Romanov
- cleanups from Miaohe Lin: vmscan, hugetlb_cgroup, hugetlb and
memory-failure
- Huang Ying adds enhancements to NUMA balancing memory tiering mode's
page promotion, with a new way of detecting hot pages.
- memcg updates from Shakeel Butt: charging optimizations and reduced
memory consumption.
- memcg cleanups from Kairui Song.
- memcg fixes and cleanups from Johannes Weiner.
- Vishal Moola provides more folio conversions
- Zhang Yi removed ll_rw_block() :(
- migration enhancements from Peter Xu
- migration error-path bugfixes from Huang Ying
- Aneesh Kumar added ability for a device driver to alter the memory
tiering promotion paths. For optimizations by PMEM drivers, DRM
drivers, etc.
- vma merging improvements from Jakub Matěn.
- NUMA hinting cleanups from David Hildenbrand.
- xu xin added aditional userspace visibility into KSM merging
activity.
- THP & KSM code consolidation from Qi Zheng.
- more folio work from Matthew Wilcox.
- KASAN updates from Andrey Konovalov.
- DAMON cleanups from Kaixu Xia.
- DAMON work from SeongJae Park: fixes, cleanups.
- hugetlb sysfs cleanups from Muchun Song.
- Mike Kravetz fixes locking issues in hugetlbfs and in hugetlb core.
Link: https://lkml.kernel.org/r/CAOUHufZabH85CeUN-MEMgL8gJGzJEWUrkiM58JkTbBhh-jew0Q@mail.gmail.com [1]
* tag 'mm-stable-2022-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (555 commits)
hugetlb: allocate vma lock for all sharable vmas
hugetlb: take hugetlb vma_lock when clearing vma_lock->vma pointer
hugetlb: fix vma lock handling during split vma and range unmapping
mglru: mm/vmscan.c: fix imprecise comments
mm/mglru: don't sync disk for each aging cycle
mm: memcontrol: drop dead CONFIG_MEMCG_SWAP config symbol
mm: memcontrol: use do_memsw_account() in a few more places
mm: memcontrol: deprecate swapaccounting=0 mode
mm: memcontrol: don't allocate cgroup swap arrays when memcg is disabled
mm/secretmem: remove reduntant return value
mm/hugetlb: add available_huge_pages() func
mm: remove unused inline functions from include/linux/mm_inline.h
selftests/vm: add selftest for MADV_COLLAPSE of uffd-minor memory
selftests/vm: add file/shmem MADV_COLLAPSE selftest for cleared pmd
selftests/vm: add thp collapse shmem testing
selftests/vm: add thp collapse file and tmpfs testing
selftests/vm: modularize thp collapse memory operations
selftests/vm: dedup THP helpers
mm/khugepaged: add tracepoint to hpage_collapse_scan_file()
mm/madvise: add file and shmem support to MADV_COLLAPSE
...
Commit 2d16803c56 ("crypto: blake2s - remove shash module") removes the
config CRYPTO_BLAKE2S.
Commit 3f342a2325 ("crypto: Kconfig - simplify hash entries") makes
various changes to the config descriptions as part of some consolidation
and clean-up, but among all those changes, it also accidently adds back
CRYPTO_BLAKE2S after its removal due to the original patch being based on
a state before the CRYPTO_BLAKE2S removal.
See Link for the author's confirmation of this happening accidently.
Fixes: 3f342a2325 ("crypto: Kconfig - simplify hash entries")
Link: https://lore.kernel.org/all/MW5PR84MB18424AB8C095BFC041AE33FDAB479@MW5PR84MB1842.NAMPRD84.PROD.OUTLOOK.COM/
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Shorten menu titles and make them consistent:
- acronym
- name
- architecture features in parenthesis
- no suffixes like "<something> algorithm", "support", or
"hardware acceleration", or "optimized"
Simplify help text descriptions, update references, and ensure that
https references are still valid.
Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Shorten menu titles and make them consistent:
- acronym
- name
- architecture features in parenthesis
- no suffixes like "<something> algorithm", "support", or
"hardware acceleration", or "optimized"
Simplify help text descriptions, update references, and ensure that
https references are still valid.
Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Shorten menu titles and make them consistent:
- acronym
- name
- architecture features in parenthesis
- no suffixes like "<something> algorithm", "support", or
"hardware acceleration", or "optimized"
Simplify help text descriptions, update references, and ensure that
https references are still valid.
Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Shorten menu titles and make them consistent:
- acronym
- name
- architecture features in parenthesis
- no suffixes like "<something> algorithm", "support", or
"hardware acceleration", or "optimized"
Simplify help text descriptions, update references, and ensure that
https references are still valid.
Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Shorten menu titles and make them consistent:
- acronym
- name
- architecture features in parenthesis
- no suffixes like "<something> algorithm", "support", or
"hardware acceleration", or "optimized"
Simplify help text descriptions, update references, and ensure that
https references are still valid.
Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Shorten menu titles and make them consistent:
- acronym
- name
- architecture features in parenthesis
- no suffixes like "<something> algorithm", "support", or
"hardware acceleration", or "optimized"
Simplify help text descriptions, update references, and ensure that
https references are still valid.
Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Shorten menu titles and make them consistent:
- acronym
- name
- architecture features in parenthesis
- no suffixes like "<something> algorithm", "support", or
"hardware acceleration", or "optimized"
Simplify help text descriptions, update references, and ensure that
https references are still valid.
Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Convert each comment section into a submenu:
Cryptographic API
Crypto core or helper
Public-key cryptography
Block ciphers
Length-preserving ciphers and modes
AEAD (authenticated encryption with associated data) ciphers
Hashes, digests, and MACs
CRCs (cyclic redundancy checks)
Compression
Random number generation
Userspace interface
That helps find entries (e.g., searching for a name like SHA512 doesn't
just report the location is Main menu -> Cryptography API, leaving you
to wade through 153 entries; it points you to the Digests page).
Move entries so they fall into the correct submenus and are
better sorted.
Suggested-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move ARM- and ARM64-accelerated menus into a submenu under
the Crypto API menu (paralleling all the architectures).
Make each submenu always appear if the corresponding architecture
is supported. Get rid of the ARM_CRYPTO and ARM64_CRYPTO symbols.
The "ARM Accelerated" or "ARM64 Accelerated" entry disappears from:
General setup --->
Platform selection --->
Kernel Features --->
Boot options --->
Power management options --->
CPU Power Management --->
[*] ACPI (Advanced Configuration and Power Interface) Support --->
[*] Virtualization --->
[*] ARM Accelerated Cryptographic Algorithms --->
(or)
[*] ARM64 Accelerated Cryptographic Algorithms --->
...
-*- Cryptographic API --->
Library routines --->
Kernel hacking --->
and moves into the Cryptographic API menu, which now contains:
...
Accelerated Cryptographic Algorithms for CPU (arm) --->
(or)
Accelerated Cryptographic Algorithms for CPU (arm64) --->
[*] Hardware crypto devices --->
...
Suggested-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move CPU-specific crypto/Kconfig entries to arch/xxx/crypto/Kconfig
and create a submenu for them under the Crypto API menu.
Suggested-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move CPU-specific crypto/Kconfig entries to arch/xxx/crypto/Kconfig
and create a submenu for them under the Crypto API menu.
Suggested-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move CPU-specific crypto/Kconfig entries to arch/xxx/crypto/Kconfig
and create a submenu for them under the Crypto API menu.
Suggested-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move CPU-specific crypto/Kconfig entries to arch/xxx/crypto/Kconfig
and create a submenu for them under the Crypto API menu.
Suggested-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move CPU-specific crypto/Kconfig entries to arch/xxx/crypto/Kconfig
and create a submenu for them under the Crypto API menu.
Suggested-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
As requested at
https://lore.kernel.org/r/YtEgzHuuMts0YBCz@gondor.apana.org.au, move
__crypto_memneq into lib/crypto/ and put it under a new tristate. The
tristate is CRYPTO_LIB_UTILS, and it builds a module libcryptoutils. As
more crypto library utilities are being added, this creates a single
place for them to go without cluttering up the main lib directory.
The module's main file will be lib/crypto/utils.c. However, leave
memneq.c as its own file because of its nonstandard license.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
API:
- Make proc files report fips module name and version.
Algorithms:
- Move generic SHA1 code into lib/crypto.
- Implement Chinese Remainder Theorem for RSA.
- Remove blake2s.
- Add XCTR with x86/arm64 acceleration.
- Add POLYVAL with x86/arm64 acceleration.
- Add HCTR2.
- Add ARIA.
Drivers:
- Add support for new CCP/PSP device ID in ccp.
-----BEGIN PGP SIGNATURE-----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=rfWK
-----END PGP SIGNATURE-----
Merge tag 'v5.20-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Make proc files report fips module name and version
Algorithms:
- Move generic SHA1 code into lib/crypto
- Implement Chinese Remainder Theorem for RSA
- Remove blake2s
- Add XCTR with x86/arm64 acceleration
- Add POLYVAL with x86/arm64 acceleration
- Add HCTR2
- Add ARIA
Drivers:
- Add support for new CCP/PSP device ID in ccp"
* tag 'v5.20-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (89 commits)
crypto: tcrypt - Remove the static variable initialisations to NULL
crypto: arm64/poly1305 - fix a read out-of-bound
crypto: hisilicon/zip - Use the bitmap API to allocate bitmaps
crypto: hisilicon/sec - fix auth key size error
crypto: ccree - Remove a useless dma_supported() call
crypto: ccp - Add support for new CCP/PSP device ID
crypto: inside-secure - Add missing MODULE_DEVICE_TABLE for of
crypto: hisilicon/hpre - don't use GFP_KERNEL to alloc mem during softirq
crypto: testmgr - some more fixes to RSA test vectors
cyrpto: powerpc/aes - delete the rebundant word "block" in comments
hwrng: via - Fix comment typo
crypto: twofish - Fix comment typo
crypto: rmd160 - fix Kconfig "its" grammar
crypto: keembay-ocs-ecc - Drop if with an always false condition
Documentation: qat: rewrite description
Documentation: qat: Use code block for qat sysfs example
crypto: lib - add module license to libsha1
crypto: lib - make the sha1 library optional
crypto: lib - move lib/sha1.c into lib/crypto/
crypto: fips - make proc files report fips module name and version
...
Use the possessive "its" instead of the contraction "it's"
where appropriate.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since the Linux RNG no longer uses sha1_transform(), the SHA-1 library
is no longer needed unconditionally. Make it possible to build the
Linux kernel without the SHA-1 library by putting it behind a kconfig
option, and selecting this new option from the kconfig options that gate
the remaining users: CRYPTO_SHA1 for crypto/sha1_generic.c, BPF for
kernel/bpf/core.c, and IPV6 for net/ipv6/addrconf.c.
Unfortunately, since BPF is selected by NET, for now this can only make
a difference for kernels built without networking support.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
FIPS 140-3 introduced a requirement for the FIPS module to return
information about itself, specifically a name and a version. These
values must match the values reported on FIPS certificates.
This patch adds two files to read a name and a version from:
/proc/sys/crypto/fips_name
/proc/sys/crypto/fips_version
v2: removed redundant parentheses in config entries.
v3: move FIPS_MODULE_* defines to fips.c where they are used.
v4: return utsrelease.h inclusion
Signed-off-by: Simo Sorce <simo@redhat.com>
Signed-off-by: Vladis Dronov <vdronov@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
ARIA(RFC 5794) is a symmetric block cipher algorithm.
This algorithm is being used widely in South Korea as a standard cipher
algorithm.
This code is written based on the ARIA implementation of OpenSSL.
The OpenSSL code is based on the distributed source code[1] by KISA.
ARIA has three key sizes and corresponding rounds.
ARIA128: 12 rounds.
ARIA192: 14 rounds.
ARIA245: 16 rounds.
[1] https://seed.kisa.or.kr/kisa/Board/19/detailView.do (Korean)
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Various accelerated software implementation Kconfig values for S390 were
mistakenly placed into drivers/crypto/Kconfig, even though they're
mainly just SIMD code and live in arch/s390/crypto/ like usual. This
gives them the very unusual dependency on CRYPTO_HW, which leads to
problems elsewhere.
This patch fixes the issue by moving the Kconfig values for non-hardware
drivers into the usual place in crypto/Kconfig.
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is used by code that doesn't need CONFIG_CRYPTO, so move this into
lib/ with a Kconfig option so that it can be selected by whatever needs
it.
This fixes a linker error Zheng pointed out when
CRYPTO_MANAGER_DISABLE_TESTS!=y and CRYPTO=m:
lib/crypto/curve25519-selftest.o: In function `curve25519_selftest':
curve25519-selftest.c:(.init.text+0x60): undefined reference to `__crypto_memneq'
curve25519-selftest.c:(.init.text+0xec): undefined reference to `__crypto_memneq'
curve25519-selftest.c:(.init.text+0x114): undefined reference to `__crypto_memneq'
curve25519-selftest.c:(.init.text+0x154): undefined reference to `__crypto_memneq'
Reported-by: Zheng Bin <zhengbin13@huawei.com>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: stable@vger.kernel.org
Fixes: aa127963f1 ("crypto: lib/curve25519 - re-add selftests")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
BLAKE2s has no currently known use as an shash. Just remove all of this
unnecessary plumbing. Removing this shash was something we talked about
back when we were making BLAKE2s a built-in, but I simply never got
around to doing it. So this completes that project.
Importantly, this fixs a bug in which the lib code depends on
crypto_simd_disabled_for_test, causing linker errors.
Also add more alignment tests to the selftests and compare SIMD and
non-SIMD compression functions, to make up for what we lose from
testmgr.c.
Reported-by: gaochao <gaochao49@huawei.com>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: stable@vger.kernel.org
Fixes: 6048fdcc5f ("lib/crypto: blake2s: include as built-in")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This is used by code that doesn't need CONFIG_CRYPTO, so move this into
lib/ with a Kconfig option so that it can be selected by whatever needs
it.
This fixes a linker error Zheng pointed out when
CRYPTO_MANAGER_DISABLE_TESTS!=y and CRYPTO=m:
lib/crypto/curve25519-selftest.o: In function `curve25519_selftest':
curve25519-selftest.c:(.init.text+0x60): undefined reference to `__crypto_memneq'
curve25519-selftest.c:(.init.text+0xec): undefined reference to `__crypto_memneq'
curve25519-selftest.c:(.init.text+0x114): undefined reference to `__crypto_memneq'
curve25519-selftest.c:(.init.text+0x154): undefined reference to `__crypto_memneq'
Reported-by: Zheng Bin <zhengbin13@huawei.com>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: stable@vger.kernel.org
Fixes: aa127963f1 ("crypto: lib/curve25519 - re-add selftests")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add hardware accelerated version of POLYVAL for x86-64 CPUs with
PCLMULQDQ support.
This implementation is accelerated using PCLMULQDQ instructions to
perform the finite field computations. For added efficiency, 8 blocks
of the message are processed simultaneously by precomputing the first
8 powers of the key.
Schoolbook multiplication is used instead of Karatsuba multiplication
because it was found to be slightly faster on x86-64 machines.
Montgomery reduction must be used instead of Barrett reduction due to
the difference in modulus between POLYVAL's field and other finite
fields.
More information on POLYVAL can be found in the HCTR2 paper:
"Length-preserving encryption with HCTR2":
https://eprint.iacr.org/2021/1441.pdf
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add hardware accelerated version of XCTR for x86-64 CPUs with AESNI
support.
More information on XCTR can be found in the HCTR2 paper:
"Length-preserving encryption with HCTR2":
https://eprint.iacr.org/2021/1441.pdf
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for HCTR2 as a template. HCTR2 is a length-preserving
encryption mode that is efficient on processors with instructions to
accelerate AES and carryless multiplication, e.g. x86 processors with
AES-NI and CLMUL, and ARM processors with the ARMv8 Crypto Extensions.
As a length-preserving encryption mode, HCTR2 is suitable for
applications such as storage encryption where ciphertext expansion is
not possible, and thus authenticated encryption cannot be used.
Currently, such applications usually use XTS, or in some cases Adiantum.
XTS has the disadvantage that it is a narrow-block mode: a bitflip will
only change 16 bytes in the resulting ciphertext or plaintext. This
reveals more information to an attacker than necessary.
HCTR2 is a wide-block mode, so it provides a stronger security property:
a bitflip will change the entire message. HCTR2 is somewhat similar to
Adiantum, which is also a wide-block mode. However, HCTR2 is designed
to take advantage of existing crypto instructions, while Adiantum
targets devices without such hardware support. Adiantum is also
designed with longer messages in mind, while HCTR2 is designed to be
efficient even on short messages.
HCTR2 requires POLYVAL and XCTR as components. More information on
HCTR2 can be found here: "Length-preserving encryption with HCTR2":
https://eprint.iacr.org/2021/1441.pdf
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for POLYVAL, an ε-Δ-universal hash function similar to
GHASH. This patch only uses POLYVAL as a component to implement HCTR2
mode. It should be noted that POLYVAL was originally specified for use
in AES-GCM-SIV (RFC 8452), but the kernel does not currently support
this mode.
POLYVAL is implemented as an shash algorithm. The implementation is
modified from ghash-generic.c.
For more information on POLYVAL see:
Length-preserving encryption with HCTR2:
https://eprint.iacr.org/2021/1441.pdf
AES-GCM-SIV: Nonce Misuse-Resistant Authenticated Encryption:
https://datatracker.ietf.org/doc/html/rfc8452
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add a generic implementation of XCTR mode as a template. XCTR is a
blockcipher mode similar to CTR mode. XCTR uses XORs and little-endian
addition rather than big-endian arithmetic which has two advantages: It
is slightly faster on little-endian CPUs and it is less likely to be
implemented incorrect since integer overflows are not possible on
practical input sizes. XCTR is used as a component to implement HCTR2.
More information on XCTR mode can be found in the HCTR2 paper:
https://eprint.iacr.org/2021/1441.pdf
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The lib/crypto libraries live in lib because they are used by various
drivers of the kernel. In contrast, the various helper functions in
crypto are there because they're used exclusively by the crypto API. The
SM3 and SM4 helper functions were erroniously moved into lib/crypto/
instead of crypto/, even though there are no in-kernel users outside of
the crypto API of those functions. This commit moves them into crypto/.
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Cc: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-----BEGIN PGP SIGNATURE-----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=RAVX
-----END PGP SIGNATURE-----
Merge tag 'for-5.18/64bit-pi-2022-03-25' of git://git.kernel.dk/linux-block
Pull block layer 64-bit data integrity support from Jens Axboe:
"This adds support for 64-bit data integrity in the block layer and in
NVMe"
* tag 'for-5.18/64bit-pi-2022-03-25' of git://git.kernel.dk/linux-block:
crypto: fix crc64 testmgr digest byte order
nvme: add support for enhanced metadata
block: add pi for extended integrity
crypto: add rocksoft 64b crc guard tag framework
lib: add rocksoft model crc64
linux/kernel: introduce lower_48_bits function
asm-generic: introduce be48 unaligned accessors
nvme: allow integrity on extended metadata formats
block: support pi with extended metadata
Hardware specific features may be able to calculate a crc64, so provide
a framework for drivers to register their implementation. If nothing is
registered, fallback to the generic table lookup implementation. The
implementation is modeled after the crct10dif equivalent.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20220303201312.3255347-7-kbusch@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The support for NVME in-band authentication currently in the works ([1])
needs to generate ephemeral DH keys for use with the RFC 7919 safe-prime
FFDHE groups.
In analogy to ECDH and its ecc_gen_privkey(), implement a
dh_safe_prime_gen_privkey() and invoke it from the ffdheXYZ(dh) templates'
common ->set_secret(), i.e. dh_safe_prime_set_secret(), in case the input
->key_size is zero.
As the RFC 7919 FFDHE groups are classified as approved safe-prime groups
by SP800-56Arev3, it's worthwhile to make the new
dh_safe_prime_gen_privkey() to follow the approach specified in
SP800-56Arev3, sec. 5.6.1.1.3 ("Key-Pair Generation Using Extra Random
Bits") in order to achieve conformance.
SP800-56Arev3 specifies a lower as well as an upper bound on the generated
key's length:
- it must be >= two times the maximum supported security strength of
the group in question and
- it must be <= the length of the domain parameter Q.
For any safe-prime group Q = (P - 1)/2 by definition and the individual
maximum supported security strengths as specified by SP800-56Arev3 have
been made available as part of the FFDHE dh_safe_prime definitions
introduced with a previous patch. Make dh_safe_prime_gen_privkey() pick
twice the maximum supported strength rounded up to the next power of two
for the output key size. This choice respects both, the lower and upper
bounds given by SP800-90Arev3 for any of the approved safe-prime groups and
is also in line with the NVME base spec 2.0, which requires the key size to
be >= 256bits.
[1] https://lore.kernel.org/r/20211202152358.60116-1-hare@suse.de
Signed-off-by: Nicolai Stange <nstange@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Current work on NVME in-band authentication support ([1]) needs to invoke
DH with the FFDHE safe-prime group parameters specified in RFC 7919.
Introduce a new CRYPTO_DH_RFC7919_GROUPS Kconfig option. If enabled, make
dh_generic register a couple of ffdheXYZ(dh) templates, one for each group:
ffdhe2048(dh), ffdhe3072(dh), ffdhe4096(dh), ffdhe6144(dh) and
ffdhe8192(dh). Their respective ->set_secret() expects a (serialized)
struct dh, just like the underlying "dh" implementation does, but with the
P and G values unset so that the safe-prime constants for the given group
can be filled in by the wrapping template.
Internally, a struct dh_safe_prime instance is being defined for each of
the ffdheXYZ(dh) templates as appropriate. In order to prepare for future
key generation, fill in the maximum security strength values as specified
by SP800-56Arev3 on the go, even though they're not needed at this point
yet.
Implement the respective ffdheXYZ(dh) crypto_template's ->create() by
simply forwarding any calls to the __dh_safe_prime_create() helper
introduced with the previous commit, passing the associated dh_safe_prime
in addition to the received ->create() arguments.
[1] https://lore.kernel.org/r/20211202152358.60116-1-hare@suse.de
Signed-off-by: Nicolai Stange <nstange@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The lrw template relies on ecb to work. So we need to declare
a Kconfig dependency as well as a module softdep on it.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In addition to sha256 we must also enable hmac for the kdf self-test
to work.
Reported-by: kernel test robot <oliver.sang@intel.com>
Fixes: 304b4acee2 ("crypto: kdf - select SHA-256 required...")
Fixes: 026a733e66 ("crypto: kdf - add SP800-108 counter key...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds AVX assembly accelerated implementation of SM3 secure
hash algorithm. From the benchmark data, compared to pure software
implementation sm3-generic, the performance increase is up to 38%.
The main algorithm implementation based on SM3 AES/BMI2 accelerated
work by libgcrypt at:
https://gnupg.org/software/libgcrypt/index.html
Benchmark on Intel i5-6200U 2.30GHz, performance data of two
implementations, pure software sm3-generic and sm3-avx acceleration.
The data comes from the 326 mode and 422 mode of tcrypt. The abscissas
are different lengths of per update. The data is tabulated and the
unit is Mb/s:
update-size | 16 64 256 1024 2048 4096 8192
------------+-------------------------------------------------------
sm3-generic | 105.97 129.60 182.12 189.62 188.06 193.66 194.88
sm3-avx | 119.87 163.05 244.44 260.92 257.60 264.87 265.88
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
SM3 generic library is stand-alone implementation, it is necessary
making the sm3-generic implementation to depends on SM3 library.
The functions crypto_sm3_*() provided by sm3_generic is no longer
exported.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
SM3 generic library is stand-alone implementation, it is necessary
for the calculation of sm2 z digest to depends on SM3 library
instead of sm3-generic.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Commit 6048fdcc5f ("lib/crypto: blake2s: include as built-in") took
away a number of prompt texts from other crypto libraries. This makes
values flip from built-in to module when oldconfig runs, and causes
problems when these crypto libs need to be built in for thingslike
BIG_KEYS.
Fixes: 6048fdcc5f ("lib/crypto: blake2s: include as built-in")
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Justin M. Forbes <jforbes@fedoraproject.org>
[Jason: - moved menu into submenu of lib/ instead of root menu
- fixed chacha sub-dependencies for CONFIG_CRYPTO]
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Pull crypto updates from Herbert Xu:
"Algorithms:
- Drop alignment requirement for data in aesni
- Use synchronous seeding from the /dev/random in DRBG
- Reseed nopr DRBGs every 5 minutes from /dev/random
- Add KDF algorithms currently used by security/DH
- Fix lack of entropy on some AMD CPUs with jitter RNG
Drivers:
- Add support for the D1 variant in sun8i-ce
- Add SEV_INIT_EX support in ccp
- PFVF support for GEN4 host driver in qat
- Compression support for GEN4 devices in qat
- Add cn10k random number generator support"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (145 commits)
crypto: af_alg - rewrite NULL pointer check
lib/mpi: Add the return value check of kcalloc()
crypto: qat - fix definition of ring reset results
crypto: hisilicon - cleanup warning in qm_get_qos_value()
crypto: kdf - select SHA-256 required for self-test
crypto: x86/aesni - don't require alignment of data
crypto: ccp - remove unneeded semicolon
crypto: stm32/crc32 - Fix kernel BUG triggered in probe()
crypto: s390/sha512 - Use macros instead of direct IV numbers
crypto: sparc/sha - remove duplicate hash init function
crypto: powerpc/sha - remove duplicate hash init function
crypto: mips/sha - remove duplicate hash init function
crypto: sha256 - remove duplicate generic hash init function
crypto: jitter - add oversampling of noise source
MAINTAINERS: update SEC2 driver maintainers list
crypto: ux500 - Use platform_get_irq() to get the interrupt
crypto: hisilicon/qm - disable qm clock-gating
crypto: omap-aes - Fix broken pm_runtime_and_get() usage
MAINTAINERS: update caam crypto driver maintainers list
crypto: octeontx2 - prevent underflow in get_cores_bmap()
...
In preparation for using blake2s in the RNG, we change the way that it
is wired-in to the build system. Instead of using ifdefs to select the
right symbol, we use weak symbols. And because ARM doesn't need the
generic implementation, we make the generic one default only if an arch
library doesn't need it already, and then have arch libraries that do
need it opt-in. So that the arch libraries can remain tristate rather
than bool, we then split the shash part from the glue code.
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: linux-kbuild@vger.kernel.org
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
The self test of the KDF is based on SHA-256. Thus, this algorithm must
be present as otherwise a warning is issued.
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
SP800-108 defines three KDFs - this patch provides the counter KDF
implementation.
The KDF is implemented as a service function where the caller has to
maintain the hash / HMAC state. Apart from this hash/HMAC state, no
additional state is required to be maintained by either the caller or
the KDF implementation.
The key for the KDF is set with the crypto_kdf108_setkey function which
is intended to be invoked before the caller requests a key derivation
operation via crypto_kdf108_ctr_generate.
SP800-108 allows the use of either a HMAC or a hash as crypto primitive
for the KDF. When a HMAC primtive is intended to be used,
crypto_kdf108_setkey must be used to set the HMAC key. Otherwise, for a
hash crypto primitve crypto_kdf108_ctr_generate can be used immediately
after allocating the hash handle.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The ecc.c file started out as part of the ECDH algorithm but got
moved out into a standalone module later. It does not build without
CRYPTO_DEFAULT_RNG, so now that other modules are using it as well we
can run into this link error:
aarch64-linux-ld: ecc.c:(.text+0xfc8): undefined reference to `crypto_default_rng'
aarch64-linux-ld: ecc.c:(.text+0xff4): undefined reference to `crypto_put_default_rng'
Move the 'select CRYPTO_DEFAULT_RNG' statement into the correct symbol.
Fixes: 0d7a78643f ("crypto: ecrdsa - add EC-RDSA (GOST 34.10) algorithm")
Fixes: 4e6602916b ("crypto: ecdsa - Add support for ECDSA signature verification")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Like the implementation of AESNI/AVX, this patch adds an accelerated
implementation of AESNI/AVX2. In terms of code implementation, by
reusing AESNI/AVX mode-related codes, the amount of code is greatly
reduced. From the benchmark data, it can be seen that when the block
size is 1024, compared to AVX acceleration, the performance achieved
by AVX2 has increased by about 70%, it is also 7.7 times of the pure
software implementation of sm4-generic.
The main algorithm implementation comes from SM4 AES-NI work by
libgcrypt and Markku-Juhani O. Saarinen at:
https://github.com/mjosaarinen/sm4ni
This optimization supports the four modes of SM4, ECB, CBC, CFB,
and CTR. Since CBC and CFB do not support multiple block parallel
encryption, the optimization effect is not obvious.
Benchmark on Intel i5-6200U 2.30GHz, performance data of three
implementation methods, pure software sm4-generic, aesni/avx
acceleration, and aesni/avx2 acceleration, the data comes from
the 218 mode and 518 mode of tcrypt. The abscissas are blocks of
different lengths. The data is tabulated and the unit is Mb/s:
block-size | 16 64 128 256 1024 1420 4096
sm4-generic
ECB enc | 60.94 70.41 72.27 73.02 73.87 73.58 73.59
ECB dec | 61.87 70.53 72.15 73.09 73.89 73.92 73.86
CBC enc | 56.71 66.31 68.05 69.84 70.02 70.12 70.24
CBC dec | 54.54 65.91 68.22 69.51 70.63 70.79 70.82
CFB enc | 57.21 67.24 69.10 70.25 70.73 70.52 71.42
CFB dec | 57.22 64.74 66.31 67.24 67.40 67.64 67.58
CTR enc | 59.47 68.64 69.91 71.02 71.86 71.61 71.95
CTR dec | 59.94 68.77 69.95 71.00 71.84 71.55 71.95
sm4-aesni-avx
ECB enc | 44.95 177.35 292.06 316.98 339.48 322.27 330.59
ECB dec | 45.28 178.66 292.31 317.52 339.59 322.52 331.16
CBC enc | 57.75 67.68 69.72 70.60 71.48 71.63 71.74
CBC dec | 44.32 176.83 284.32 307.24 328.61 312.61 325.82
CFB enc | 57.81 67.64 69.63 70.55 71.40 71.35 71.70
CFB dec | 43.14 167.78 282.03 307.20 328.35 318.24 325.95
CTR enc | 42.35 163.32 279.11 302.93 320.86 310.56 317.93
CTR dec | 42.39 162.81 278.49 302.37 321.11 310.33 318.37
sm4-aesni-avx2
ECB enc | 45.19 177.41 292.42 316.12 339.90 322.53 330.54
ECB dec | 44.83 178.90 291.45 317.31 339.85 322.55 331.07
CBC enc | 57.66 67.62 69.73 70.55 71.58 71.66 71.77
CBC dec | 44.34 176.86 286.10 501.68 559.58 483.87 527.46
CFB enc | 57.43 67.60 69.61 70.52 71.43 71.28 71.65
CFB dec | 43.12 167.75 268.09 499.33 558.35 490.36 524.73
CTR enc | 42.42 163.39 256.17 493.95 552.45 481.58 517.19
CTR dec | 42.49 163.11 256.36 493.34 552.62 481.49 516.83
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds AES-NI/AVX/x86_64 assembler implementation of SM4
block cipher. Through two affine transforms, we can use the AES S-Box
to simulate the SM4 S-Box to achieve the effect of instruction
acceleration.
The main algorithm implementation comes from SM4 AES-NI work by
libgcrypt and Markku-Juhani O. Saarinen at:
https://github.com/mjosaarinen/sm4ni
This optimization supports the four modes of SM4, ECB, CBC, CFB, and
CTR. Since CBC and CFB do not support multiple block parallel
encryption, the optimization effect is not obvious.
Benchmark on Intel Xeon Cascadelake, the data comes from the 218 mode
and 518 mode of tcrypt. The abscissas are blocks of different lengths.
The data is tabulated and the unit is Mb/s:
sm4-generic | 16 64 128 256 1024 1420 4096
ECB enc | 40.99 46.50 48.05 48.41 49.20 49.25 49.28
ECB dec | 41.07 46.99 48.15 48.67 49.20 49.25 49.29
CBC enc | 37.71 45.28 46.77 47.60 48.32 48.37 48.40
CBC dec | 36.48 44.82 46.43 47.45 48.23 48.30 48.36
CFB enc | 37.94 44.84 46.12 46.94 47.57 47.46 47.68
CFB dec | 37.50 42.84 43.74 44.37 44.85 44.80 44.96
CTR enc | 39.20 45.63 46.75 47.49 48.09 47.85 48.08
CTR dec | 39.64 45.70 46.72 47.47 47.98 47.88 48.06
sm4-aesni-avx
ECB enc | 33.75 134.47 221.64 243.43 264.05 251.58 258.13
ECB dec | 34.02 134.92 223.11 245.14 264.12 251.04 258.33
CBC enc | 38.85 46.18 47.67 48.34 49.00 48.96 49.14
CBC dec | 33.54 131.29 223.88 245.27 265.50 252.41 263.78
CFB enc | 38.70 46.10 47.58 48.29 49.01 48.94 49.19
CFB dec | 32.79 128.40 223.23 244.87 265.77 253.31 262.79
CTR enc | 32.58 122.23 220.29 241.16 259.57 248.32 256.69
CTR dec | 32.81 122.47 218.99 241.54 258.42 248.58 256.61
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Take the existing small footprint and mostly time invariant C code
and turn it into a SM4 library that can be used for non-performance
critical, casual use of SM4, and as a fallback for, e.g., SIMD code
that needs a secondary path that can be taken in contexts where the
SIMD unit is off limits.
Secondly, some codes have been optimized, such as unrolling small
times loop, removing unnecessary memory shifts, exporting sbox, fk,
ck arrays, and basic encryption and decryption functions.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
With the swtich to use HMAC(SHA-512) as the default DRBG type, the
configuration must now also select SHA-512.
Fixes: 9b7b94683a "crypto: DRBG - switch to HMAC SHA512 DRBG as default
DRBG"
Reported-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Signed-off-by: Stephan Mueller <smueller@chronox.com>
Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull crypto updates from Herbert Xu:
"API:
- crypto_destroy_tfm now ignores errors as well as NULL pointers
Algorithms:
- Add explicit curve IDs in ECDH algorithm names
- Add NIST P384 curve parameters
- Add ECDSA
Drivers:
- Add support for Green Sardine in ccp
- Add ecdh/curve25519 to hisilicon/hpre
- Add support for AM64 in sa2ul"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (184 commits)
fsverity: relax build time dependency on CRYPTO_SHA256
fscrypt: relax Kconfig dependencies for crypto API algorithms
crypto: camellia - drop duplicate "depends on CRYPTO"
crypto: s5p-sss - consistently use local 'dev' variable in probe()
crypto: s5p-sss - remove unneeded local variable initialization
crypto: s5p-sss - simplify getting of_device_id match data
ccp: ccp - add support for Green Sardine
crypto: ccp - Make ccp_dev_suspend and ccp_dev_resume void functions
crypto: octeontx2 - add support for OcteonTX2 98xx CPT block.
crypto: chelsio/chcr - Remove useless MODULE_VERSION
crypto: ux500/cryp - Remove duplicate argument
crypto: chelsio - remove unused function
crypto: sa2ul - Add support for AM64
crypto: sa2ul - Support for per channel coherency
dt-bindings: crypto: ti,sa2ul: Add new compatible for AM64
crypto: hisilicon - enable new error types for QM
crypto: hisilicon - add new error type for SEC
crypto: hisilicon - support new error types for ZIP
crypto: hisilicon - dynamic configuration 'err_info'
crypto: doc - fix kernel-doc notation in chacha.c and af_alg.c
...
All 5 CAMELLIA crypto driver Kconfig symbols have a duplicate
"depends on CRYPTO" line but they are inside an
"if CRYPTO"/"endif # if CRYPTO" block, so drop the duplicate "depends"
lines.
These 5 symbols still depend on CRYPTO.
Fixes: 584fffc8b1 ("[CRYPTO] kconfig: Ordering cleanup")
Fixes: 0b95ec56ae ("crypto: camellia - add assembler implementation for x86_64")
Fixes: d9b1d2e7e1 ("crypto: camellia - add AES-NI/AVX/x86_64 assembler implementation of camellia cipher")
Fixes: f3f935a76a ("crypto: camellia - add AVX2/AES-NI/x86_64 assembler implementation of camellia cipher")
Fixes: c5aac2df65 ("sparc64: Add DES driver making use of the new des opcodes.")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Sebastian Siewior <sebastian@breakpoint.cc>
Cc: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for parsing the parameters of a NIST P256 or NIST P192 key.
Enable signature verification using these keys. The new module is
enabled with CONFIG_ECDSA:
Elliptic Curve Digital Signature Algorithm (NIST P192, P256 etc.)
is A NIST cryptographic standard algorithm. Only signature verification
is implemented.
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The MIPS Poly1305 implementation is generic MIPS code written such as to
support down to the original MIPS I and MIPS III ISA for the 32-bit and
64-bit variant respectively. Lift the current limitation then to enable
code for MIPSr1 ISA or newer processors only and have it available for
all MIPS processors.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes: a11d055e7a ("crypto: mips/poly1305 - incorporate OpenSSL/CRYPTOGAMS optimized implementation")
Cc: stable@vger.kernel.org # v5.5+
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
It is not trivial to trace back why exactly the tnepres variant of
serpent was added ~17 years ago - Google searches come up mostly empty,
but it seems to be related with the 'kerneli' version, which was based
on an incorrect interpretation of the serpent spec.
In other words, nobody is likely to care anymore today, so let's get rid
of it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Salsa20 is not used anywhere in the kernel, is not suitable for disk
encryption, and widely considered to have been superseded by ChaCha20.
So let's remove it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tiger is never referenced anywhere in the kernel, and unlikely
to be depended upon by userspace via AF_ALG. So let's remove it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
RIPE-MD 320 is never referenced anywhere in the kernel, and unlikely
to be depended upon by userspace via AF_ALG. So let's remove it
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
RIPE-MD 256 is never referenced anywhere in the kernel, and unlikely
to be depended upon by userspace via AF_ALG. So let's remove it
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
RIPE-MD 128 is never referenced anywhere in the kernel, and unlikely
to be depended upon by userspace via AF_ALG. So let's remove it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
All dependencies on the x86 glue helper module have been replaced by
local instantiations of the new ECB/CBC preprocessor helper macros, so
the glue helper module can be retired.
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace the glue helper dependency with implementations of ECB and CBC
based on the new CPP macros, which avoid the need for indirect calls.
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace the glue helper dependency with implementations of ECB and CBC
based on the new CPP macros, which avoid the need for indirect calls.
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace the glue helper dependency with implementations of ECB and CBC
based on the new CPP macros, which avoid the need for indirect calls.
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace the glue helper dependency with implementations of ECB and CBC
based on the new CPP macros, which avoid the need for indirect calls.
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Blowfish in counter mode is never used in the kernel, so there
is no point in keeping an accelerated implementation around.
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
DES or Triple DES in counter mode is never used in the kernel, so there
is no point in keeping an accelerated implementation around.
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Twofish in CTR mode is never used by the kernel directly, and is highly
unlikely to be relied upon by dm-crypt or algif_skcipher. So let's drop
the accelerated CTR mode implementation, and instead, rely on the CTR
template and the bare cipher.
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
CAST6 in CTR mode is never used by the kernel directly, and is highly
unlikely to be relied upon by dm-crypt or algif_skcipher. So let's drop
the accelerated CTR mode implementation, and instead, rely on the CTR
template and the bare cipher.
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
CAST5 in CTR mode is never used by the kernel directly, and is highly
unlikely to be relied upon by dm-crypt or algif_skcipher. So let's drop
the accelerated CTR mode implementation, and instead, rely on the CTR
template and the bare cipher.
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Serpent in CTR mode is never used by the kernel directly, and is highly
unlikely to be relied upon by dm-crypt or algif_skcipher. So let's drop
the accelerated CTR mode implementation, and instead, rely on the CTR
template and the bare cipher.
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Camellia in CTR mode is never used by the kernel directly, and is highly
unlikely to be relied upon by dm-crypt or algif_skcipher. So let's drop
the accelerated CTR mode implementation, and instead, rely on the CTR
template and the bare cipher.
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that the XTS template can wrap accelerated ECB modes, it can be
used to implement Twofish in XTS mode as well, which turns out to
be at least as fast, and sometimes even faster
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that the XTS template can wrap accelerated ECB modes, it can be
used to implement Serpent in XTS mode as well, which turns out to
be at least as fast, and sometimes even faster
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that the XTS template can wrap accelerated ECB modes, it can be
used to implement CAST6 in XTS mode as well, which turns out to
be at least as fast, and sometimes even faster
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that the XTS template can wrap accelerated ECB modes, it can be
used to implement Camellia in XTS mode as well, which turns out to
be at least as fast, and sometimes even faster.
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The AES-NI driver implements XTS via the glue helper, which consumes
a struct with sets of function pointers which are invoked on chunks
of input data of the appropriate size, as annotated in the struct.
Let's get rid of this indirection, so that we can perform direct calls
to the assembler helpers. Instead, let's adopt the arm64 strategy, i.e.,
provide a helper which can consume inputs of any size, provided that the
penultimate, full block is passed via the last call if ciphertext stealing
needs to be applied.
This also allows us to enable the XTS mode for i386.
Tested-by: Eric Biggers <ebiggers@google.com> # x86_64
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When working on crypto algorithms, being able to run tcrypt quickly
without booting an entire Linux installation can be very useful. For
instance, QEMU/kvm can be used to boot a kernel from the command line,
and having tcrypt.ko builtin would allow tcrypt to be executed to run
benchmarks, or to run tests for algorithms that need to be instantiated
from templates, without the need to make it past the point where the
rootfs is mounted.
So let's relax the requirement that tcrypt can only be built as a module
when CONFIG_EXPERT is enabled.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The extra tests in the manager actually require the manager to be
selected too. Otherwise the linker gives errors like:
ld: arch/x86/crypto/chacha_glue.o: in function `chacha_simd_stream_xor':
chacha_glue.c:(.text+0x422): undefined reference to `crypto_simd_disabled_for_test'
Fixes: 2343d1529a ("crypto: Kconfig - allow tests to be disabled when manager is disabled")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This new module implement the SM2 public key algorithm. It was
published by State Encryption Management Bureau, China.
List of specifications for SM2 elliptic curve public key cryptography:
* GM/T 0003.1-2012
* GM/T 0003.2-2012
* GM/T 0003.3-2012
* GM/T 0003.4-2012
* GM/T 0003.5-2012
IETF: https://tools.ietf.org/html/draft-shen-sm2-ecdsa-02
oscca: http://www.oscca.gov.cn/sca/xxgk/2010-12/17/content_1002386.shtml
scctc: http://www.gmbz.org.cn/main/bzlb.html
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Tested-by: Xufeng Zhang <yunbo.xufeng@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Extend the user-space RNG interface:
1. Add entropy input via ALG_SET_DRBG_ENTROPY setsockopt option;
2. Add additional data input via sendmsg syscall.
This allows DRBG to be tested with test vectors, for example for the
purpose of CAVP testing, which otherwise isn't possible.
To prevent erroneous use of entropy input, it is hidden under
CRYPTO_USER_API_RNG_CAVP config option and requires CAP_SYS_ADMIN to
succeed.
Signed-off-by: Elena Petrova <lenaptr@google.com>
Acked-by: Stephan Müller <smueller@chronox.de>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
We have a few interesting pieces in our cipher museum, which are never
used internally, and were only ever provided as generic C implementations.
Unfortunately, we cannot simply remove this code, as we cannot be sure
that it is not being used via the AF_ALG socket API, however unlikely.
So let's mark the Anubis, Khazad, SEED and TEA algorithms as obsolete,
which means they can only be enabled in the build if the socket API is
enabled in the first place.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Cryptographic algorithms may have a lifespan that is significantly
shorter than Linux's, and so we need to start phasing out algorithms
that are known to be broken, and are no longer fit for general use.
RC4 (or arc4) is a good example here: there are a few areas where its
use is still somewhat acceptable, e.g., for interoperability with legacy
wifi hardware that can only use WEP or TKIP data encryption, but that
should not imply that, for instance, use of RC4 based EAP-TLS by the WPA
supplicant for negotiating TKIP keys is equally acceptable, or that RC4
should remain available as a general purpose cryptographic transform for
all in-kernel and user space clients.
Now that all in-kernel users that need to retain support have moved to
the arc4 library interface, and the known users of ecb(arc4) via the
socket API (iwd [0] and libell [1][2]) have been updated to switch to a
local implementation, we can take the next step, and mark the ecb(arc4)
skcipher as obsolete, and only provide it if the socket API is enabled in
the first place, as well as provide the option to disable all algorithms
that have been marked as obsolete.
[0] https://git.kernel.org/pub/scm/network/wireless/iwd.git/commit/?id=1db8a85a60c64523
[1] https://git.kernel.org/pub/scm/libs/ell/ell.git/commit/?id=53482ce421b727c2
[2] https://git.kernel.org/pub/scm/libs/ell/ell.git/commit/?id=7f6a137809d42f6b
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull READ/WRITE_ONCE rework from Will Deacon:
"This the READ_ONCE rework I've been working on for a while, which
bumps the minimum GCC version and improves code-gen on arm64 when
stack protector is enabled"
[ Side note: I'm _really_ tempted to raise the minimum gcc version to
4.9, so that we can just say that we require _Generic() support.
That would allow us to more cleanly handle a lot of the cases where we
depend on very complex macros with 'sizeof' or __builtin_choose_expr()
with __builtin_types_compatible_p() etc.
This branch has a workaround for sparse not handling _Generic(),
either, but that was already fixed in the sparse development branch,
so it's really just gcc-4.9 that we'd require. - Linus ]
* 'rwonce/rework' of git://git.kernel.org/pub/scm/linux/kernel/git/will/linux:
compiler_types.h: Use unoptimized __unqual_scalar_typeof for sparse
compiler_types.h: Optimize __unqual_scalar_typeof compilation time
compiler.h: Enforce that READ_ONCE_NOCHECK() access size is sizeof(long)
compiler-types.h: Include naked type in __pick_integer_type() match
READ_ONCE: Fix comment describing 2x32-bit atomicity
gcov: Remove old GCC 3.4 support
arm64: barrier: Use '__unqual_scalar_typeof' for acquire/release macros
locking/barriers: Use '__unqual_scalar_typeof' for load-acquire macros
READ_ONCE: Drop pointer qualifiers when reading from scalar types
READ_ONCE: Enforce atomicity for {READ,WRITE}_ONCE() memory accesses
READ_ONCE: Simplify implementations of {READ,WRITE}_ONCE()
arm64: csum: Disable KASAN for do_csum()
fault_inject: Don't rely on "return value" from WRITE_ONCE()
net: tls: Avoid assigning 'const' pointer to non-const pointer
netfilter: Avoid assigning 'const' pointer to non-const pointer
compiler/gcc: Raise minimum GCC version for kernel builds to 4.8
if CRYPTO_DRBG_CTR is builtin and CTR is module, allocating such algo
will fail.
DRBG: could not allocate CTR cipher TFM handle: ctr(aes)
alg: drbg: Failed to reset rng
alg: drbg: Test 0 failed for drbg_pr_ctr_aes128
DRBG: could not allocate CTR cipher TFM handle: ctr(aes)
alg: drbg: Failed to reset rng
alg: drbg: Test 0 failed for drbg_nopr_ctr_aes128
DRBG: could not allocate CTR cipher TFM handle: ctr(aes)
alg: drbg: Failed to reset rng
alg: drbg: Test 0 failed for drbg_nopr_ctr_aes192
DRBG: could not allocate CTR cipher TFM handle: ctr(aes)
alg: drbg: Failed to reset rng
alg: drbg: Test 0 failed for drbg_nopr_ctr_aes256
So let's select CTR instead of just depend on it.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
As comment of the v2, Herbert said: "The SEQIV select from CTR is historical
and no longer necessary."
So let's get rid of it.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
It is very rare to see versions of GCC prior to 4.8 being used to build
the mainline kernel. These old compilers are also know to have codegen
issues which can lead to silent miscompilation:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58145
Raise the minimum GCC version for kernel build to 4.8 and remove some
tautological Kconfig dependencies as a consequence.
Cc: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
