Add some missing dependencies to the CPUID dependency table:
- All the AMX features depend on AMX_TILE
- All the SPEC_CTRL features depend on SPEC_CTRL
[ mingo: Keep the AMX part of the table grouped ... ]
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Sohil Mehta <sohil.mehta@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Ahmed S. Darwish <darwi@linutronix.de>
Link: https://lore.kernel.org/r/20240924170128.2611854-1-ak@linux.intel.com
1) Convert all del_timer[_sync]() instances over to the new
timer_delete[_sync]() API and remove the legacy wrappers.
Conversion was done with coccinelle plus some manual fixups as
coccinelle chokes on scoped_guard().
2) The final cleanup of the hrtimer_init() to hrtimer_setup() conversion.
This has been delayed to the end of the merge window, so that all
patches which have been merged through other trees are in mainline and
all new users are catched.
Doing this right before rc1 ensures that new code which is merged post rc1
is not introducing new instances of the original functionality.
-----BEGIN PGP SIGNATURE-----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=8Ftq
-----END PGP SIGNATURE-----
Merge tag 'timers-cleanups-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanups from Thomas Gleixner:
"A set of final cleanups for the timer subsystem:
- Convert all del_timer[_sync]() instances over to the new
timer_delete[_sync]() API and remove the legacy wrappers.
Conversion was done with coccinelle plus some manual fixups as
coccinelle chokes on scoped_guard().
- The final cleanup of the hrtimer_init() to hrtimer_setup()
conversion.
This has been delayed to the end of the merge window, so that all
patches which have been merged through other trees are in mainline
and all new users are catched.
Doing this right before rc1 ensures that new code which is merged post
rc1 is not introducing new instances of the original functionality"
* tag 'timers-cleanups-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tracing/timers: Rename the hrtimer_init event to hrtimer_setup
hrtimers: Rename debug_init_on_stack() to debug_setup_on_stack()
hrtimers: Rename debug_init() to debug_setup()
hrtimers: Rename __hrtimer_init_sleeper() to __hrtimer_setup_sleeper()
hrtimers: Remove unnecessary NULL check in hrtimer_start_range_ns()
hrtimers: Make callback function pointer private
hrtimers: Merge __hrtimer_init() into __hrtimer_setup()
hrtimers: Switch to use __htimer_setup()
hrtimers: Delete hrtimer_init()
treewide: Convert new and leftover hrtimer_init() users
treewide: Switch/rename to timer_delete[_sync]()
1) A treewide cleanup for the irq_domain code, which makes the naming
consistent and gets rid of the original oddity of naming domains
'host'.
This is a trivial mechanical change and is done late to ensure that
all instances have been catched and new code merged post rc1 wont
reintroduce new instances.
2) A trivial consistency fix in the migration code
The recent introduction of irq_force_complete_move() in the core
code, causes a problem for the nostalgia crowd who maintains ia64 out
of tree.
The code assumes that hierarchical interrupt domains are enabled and
dereferences irq_data::parent_data unconditionally. That works in mainline
because both architectures which enable that code have hierarchical domains
enabled. Though it breaks the ia64 build, which enables the functionality,
but does not have hierarchical domains.
While it's not really a problem for mainline today, this
unconditional dereference is inconsistent and trivially fixable by
using the existing helper function irqd_get_parent_data(), which has
the appropriate #ifdeffery in place.
-----BEGIN PGP SIGNATURE-----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=lhoB
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull more irq updates from Thomas Gleixner:
"A set of updates for the interrupt subsystem:
- A treewide cleanup for the irq_domain code, which makes the naming
consistent and gets rid of the original oddity of naming domains
'host'.
This is a trivial mechanical change and is done late to ensure that
all instances have been catched and new code merged post rc1 wont
reintroduce new instances.
- A trivial consistency fix in the migration code
The recent introduction of irq_force_complete_move() in the core
code, causes a problem for the nostalgia crowd who maintains ia64
out of tree.
The code assumes that hierarchical interrupt domains are enabled
and dereferences irq_data::parent_data unconditionally. That works
in mainline because both architectures which enable that code have
hierarchical domains enabled. Though it breaks the ia64 build,
which enables the functionality, but does not have hierarchical
domains.
While it's not really a problem for mainline today, this
unconditional dereference is inconsistent and trivially fixable by
using the existing helper function irqd_get_parent_data(), which
has the appropriate #ifdeffery in place"
* tag 'irq-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/migration: Use irqd_get_parent_data() in irq_force_complete_move()
irqdomain: Stop using 'host' for domain
irqdomain: Rename irq_get_default_host() to irq_get_default_domain()
irqdomain: Rename irq_set_default_host() to irq_set_default_domain()
- Improve performance in gendwarfksyms
- Remove deprecated EXTRA_*FLAGS and KBUILD_ENABLE_EXTRA_GCC_CHECKS
- Support CONFIG_HEADERS_INSTALL for ARCH=um
- Use more relative paths to sources files for better reproducibility
- Support the loong64 Debian architecture
- Add Kbuild bash completion
- Introduce intermediate vmlinux.unstripped for architectures that need
static relocations to be stripped from the final vmlinux
- Fix versioning in Debian packages for -rc releases
- Treat missing MODULE_DESCRIPTION() as an error
- Convert Nios2 Makefiles to use the generic rule for built-in DTB
- Add debuginfo support to the RPM package
-----BEGIN PGP SIGNATURE-----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=GiQ6
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Improve performance in gendwarfksyms
- Remove deprecated EXTRA_*FLAGS and KBUILD_ENABLE_EXTRA_GCC_CHECKS
- Support CONFIG_HEADERS_INSTALL for ARCH=um
- Use more relative paths to sources files for better reproducibility
- Support the loong64 Debian architecture
- Add Kbuild bash completion
- Introduce intermediate vmlinux.unstripped for architectures that need
static relocations to be stripped from the final vmlinux
- Fix versioning in Debian packages for -rc releases
- Treat missing MODULE_DESCRIPTION() as an error
- Convert Nios2 Makefiles to use the generic rule for built-in DTB
- Add debuginfo support to the RPM package
* tag 'kbuild-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (40 commits)
kbuild: rpm-pkg: build a debuginfo RPM
kconfig: merge_config: use an empty file as initfile
nios2: migrate to the generic rule for built-in DTB
rust: kbuild: skip `--remap-path-prefix` for `rustdoc`
kbuild: pacman-pkg: hardcode module installation path
kbuild: deb-pkg: don't set KBUILD_BUILD_VERSION unconditionally
modpost: require a MODULE_DESCRIPTION()
kbuild: make all file references relative to source root
x86: drop unnecessary prefix map configuration
kbuild: deb-pkg: add comment about future removal of KDEB_COMPRESS
kbuild: Add a help message for "headers"
kbuild: deb-pkg: remove "version" variable in mkdebian
kbuild: deb-pkg: fix versioning for -rc releases
Documentation/kbuild: Fix indentation in modules.rst example
x86: Get rid of Makefile.postlink
kbuild: Create intermediate vmlinux build with relocations preserved
kbuild: Introduce Kconfig symbol for linking vmlinux with relocations
kbuild: link-vmlinux.sh: Make output file name configurable
kbuild: do not generate .tmp_vmlinux*.map when CONFIG_VMLINUX_MAP=y
Revert "kheaders: Ignore silly-rename files"
...
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Naming interrupt domains host is confusing at best and the irqdomain code
uses both domain and host inconsistently.
Therefore rename irq_set_default_host() to irq_set_default_domain().
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-3-jirislaby@kernel.org
- Fix a performance regression on AMD iGPU and dGPU drivers,
related to the unintended activation of DMA bounce buffers
that regressed game performance if KASLR disturbed things
just enough.
- Fix a copy_user_generic() performance regression on certain
older non-FSRM/ERMS CPUs
- Fix a Clang build warning due to a semantic merge conflict
the Kunit tree generated with the x86 tree
- Fix FRED related system hang during S4 resume
- Remove an unused API
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=8jxI
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2025-04-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
- Fix a performance regression on AMD iGPU and dGPU drivers, related to
the unintended activation of DMA bounce buffers that regressed game
performance if KASLR disturbed things just enough
- Fix a copy_user_generic() performance regression on certain older
non-FSRM/ERMS CPUs
- Fix a Clang build warning due to a semantic merge conflict the Kunit
tree generated with the x86 tree
- Fix FRED related system hang during S4 resume
- Remove an unused API
* tag 'x86-urgent-2025-04-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fred: Fix system hang during S4 resume with FRED enabled
x86/platform/iosf_mbi: Remove unused iosf_mbi_unregister_pmic_bus_access_notifier()
x86/mm/init: Handle the special case of device private pages in add_pages(), to not increase max_pfn and trigger dma_addressing_limited() bounce buffers
x86/tools: Drop duplicate unlikely() definition in insn_decoder_test.c
x86/uaccess: Improve performance by aligning writes to 8 bytes in copy_user_generic(), on non-FSRM/ERMS CPUs
Use a separate subclass when acquiring KVM's per-CPU posted interrupts
wakeup lock in the scheduled out path, i.e. when adding a vCPU on the list
of vCPUs to wake, to workaround a false positive deadlock.
Chain exists of:
&p->pi_lock --> &rq->__lock --> &per_cpu(wakeup_vcpus_on_cpu_lock, cpu)
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&per_cpu(wakeup_vcpus_on_cpu_lock, cpu));
lock(&rq->__lock);
lock(&per_cpu(wakeup_vcpus_on_cpu_lock, cpu));
lock(&p->pi_lock);
*** DEADLOCK ***
In the wakeup handler, the callchain is *always*:
sysvec_kvm_posted_intr_wakeup_ipi()
|
--> pi_wakeup_handler()
|
--> kvm_vcpu_wake_up()
|
--> try_to_wake_up(),
and the lock order is:
&per_cpu(wakeup_vcpus_on_cpu_lock, cpu) --> &p->pi_lock.
For the schedule out path, the callchain is always (for all intents and
purposes; if the kernel is preemptible, kvm_sched_out() can be called from
something other than schedule(), but the beginning of the callchain will
be the same point in vcpu_block()):
vcpu_block()
|
--> schedule()
|
--> kvm_sched_out()
|
--> vmx_vcpu_put()
|
--> vmx_vcpu_pi_put()
|
--> pi_enable_wakeup_handler()
and the lock order is:
&rq->__lock --> &per_cpu(wakeup_vcpus_on_cpu_lock, cpu)
I.e. lockdep sees AB+BC ordering for schedule out, and CA ordering for
wakeup, and complains about the A=>C versus C=>A inversion. In practice,
deadlock can't occur between schedule out and the wakeup handler as they
are mutually exclusive. The entirely of the schedule out code that runs
with the problematic scheduler locks held, does so with IRQs disabled,
i.e. can't run concurrently with the wakeup handler.
Use a subclass instead disabling lockdep entirely, and tell lockdep that
both subclasses are being acquired when loading a vCPU, as the sched_out
and sched_in paths are NOT mutually exclusive, e.g.
CPU 0 CPU 1
--------------- ---------------
vCPU0 sched_out
vCPU1 sched_in
vCPU1 sched_out vCPU 0 sched_in
where vCPU0's sched_in may race with vCPU1's sched_out, on CPU 0's wakeup
list+lock.
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-ID: <20250401154727.835231-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Assert that IRQs are already disabled when putting a vCPU on a CPU's PI
wakeup list, as opposed to saving/disabling+restoring IRQs. KVM relies on
IRQs being disabled until the vCPU task is fully scheduled out, i.e. until
the scheduler has dropped all of its per-CPU locks (e.g. for the runqueue),
as attempting to wake the task while it's being scheduled out could lead
to deadlock.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Yan Zhao <yan.y.zhao@intel.com>
Message-ID: <20250401154727.835231-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Explicitly zero/empty-initialize the unions used for PMU related CPUID
entries, instead of manually zeroing all fields (hopefully), or in the
case of 0x80000022, relying on the compiler to clobber the uninitialized
bitfields.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-ID: <20250315024102.2361628-1-seanjc@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Wrap the TDP MMU page counter in CONFIG_KVM_PROVE_MMU so that the sanity
check is omitted from production builds, and more importantly to remove
the atomic accesses to account pages. A one-off memory leak in production
is relatively uninteresting, and a WARN_ON won't help mitigate a systemic
issue; it's as much about helping triage memory leaks as it is about
detecting them in the first place, and doesn't magically stop the leaks.
I.e. production environments will be quite sad if a severe KVM bug escapes,
regardless of whether or not KVM WARNs.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250315023448.2358456-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acquire a lock on kvm->srcu when userspace is getting MP state to handle a
rather extreme edge case where "accepting" APIC events, i.e. processing
pending INIT or SIPI, can trigger accesses to guest memory. If the vCPU
is in L2 with INIT *and* a TRIPLE_FAULT request pending, then getting MP
state will trigger a nested VM-Exit by way of ->check_nested_events(), and
emuating the nested VM-Exit can access guest memory.
The splat was originally hit by syzkaller on a Google-internal kernel, and
reproduced on an upstream kernel by hacking the triple_fault_event_test
selftest to stuff a pending INIT, store an MSR on VM-Exit (to generate a
memory access on VMX), and do vcpu_mp_state_get() to trigger the scenario.
=============================
WARNING: suspicious RCU usage
6.14.0-rc3-b112d356288b-vmx/pi_lockdep_false_pos-lock #3 Not tainted
-----------------------------
include/linux/kvm_host.h:1058 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by triple_fault_ev/1256:
#0: ffff88810df5a330 (&vcpu->mutex){+.+.}-{4:4}, at: kvm_vcpu_ioctl+0x8b/0x9a0 [kvm]
stack backtrace:
CPU: 11 UID: 1000 PID: 1256 Comm: triple_fault_ev Not tainted 6.14.0-rc3-b112d356288b-vmx #3
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
Call Trace:
<TASK>
dump_stack_lvl+0x7f/0x90
lockdep_rcu_suspicious+0x144/0x190
kvm_vcpu_gfn_to_memslot+0x156/0x180 [kvm]
kvm_vcpu_read_guest+0x3e/0x90 [kvm]
read_and_check_msr_entry+0x2e/0x180 [kvm_intel]
__nested_vmx_vmexit+0x550/0xde0 [kvm_intel]
kvm_check_nested_events+0x1b/0x30 [kvm]
kvm_apic_accept_events+0x33/0x100 [kvm]
kvm_arch_vcpu_ioctl_get_mpstate+0x30/0x1d0 [kvm]
kvm_vcpu_ioctl+0x33e/0x9a0 [kvm]
__x64_sys_ioctl+0x8b/0xb0
do_syscall_64+0x6c/0x170
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250401150504.829812-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
from Mike Rapoport fixes a couple of issues with the just-merged "arch,
mm: reduce code duplication in mem_init()" series.
- The 4 patch series "MAINTAINERS: add my isub-entries to MM part." from
Mike Rapoport does some maintenance on MAINTAINERS.
- The 6 patch series "remove tlb_remove_page_ptdesc()" from Qi Zheng
does some cleanup work to the page mapping code.
- The 7 patch series "mseal system mappings" from Jeff Xu permits
sealing of "system mappings", such as vdso, vvar, vvar_vclock, vectors
(arm compat-mode), sigpage (arm compat-mode).
- Plus the usual shower of singleton patches.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZ+4XpgAKCRDdBJ7gKXxA
jnwtAP43Rp3zyWf034fEypea36xQqcsy4I7YUTdZEgnFS7LCZwEApM97JvGHsYEr
Ns9Zhnh+E3RWASfOAzJoVZVrAaMovg4=
=MyVR
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2025-04-02-22-07' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
- The series "mm: fixes for fallouts from mem_init() cleanup" from Mike
Rapoport fixes a couple of issues with the just-merged "arch, mm:
reduce code duplication in mem_init()" series
- The series "MAINTAINERS: add my isub-entries to MM part." from Mike
Rapoport does some maintenance on MAINTAINERS
- The series "remove tlb_remove_page_ptdesc()" from Qi Zheng does some
cleanup work to the page mapping code
- The series "mseal system mappings" from Jeff Xu permits sealing of
"system mappings", such as vdso, vvar, vvar_vclock, vectors (arm
compat-mode), sigpage (arm compat-mode)
- Plus the usual shower of singleton patches
* tag 'mm-stable-2025-04-02-22-07' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (31 commits)
mseal sysmap: add arch-support txt
mseal sysmap: enable s390
selftest: test system mappings are sealed
mseal sysmap: update mseal.rst
mseal sysmap: uprobe mapping
mseal sysmap: enable arm64
mseal sysmap: enable x86-64
mseal sysmap: generic vdso vvar mapping
selftests: x86: test_mremap_vdso: skip if vdso is msealed
mseal sysmap: kernel config and header change
mm: pgtable: remove tlb_remove_page_ptdesc()
x86: pgtable: convert to use tlb_remove_ptdesc()
riscv: pgtable: unconditionally use tlb_remove_ptdesc()
mm: pgtable: convert some architectures to use tlb_remove_ptdesc()
mm: pgtable: change pt parameter of tlb_remove_ptdesc() to struct ptdesc*
mm: pgtable: make generic tlb_remove_table() use struct ptdesc
microblaze/mm: put mm_cmdline_setup() in .init.text section
mm/memory_hotplug: fix call folio_test_large with tail page in do_migrate_range
MAINTAINERS: mm: add entry for secretmem
MAINTAINERS: mm: add entry for numa memblocks and numa emulation
...
Current minimum required version of binutils is 2.25,
which supports MONITOR and MWAIT instruction mnemonics.
Replace the byte-wise specification of MONITOR and
MWAIT with these proper mnemonics.
No functional change intended.
Note: LLVM assembler is not able to assemble correct forms of MONITOR
and MWAIT instructions with explicit operands and reports:
error: invalid operand for instruction
monitor %rax,%ecx,%edx
^~~~
# https://lore.kernel.org/oe-kbuild-all/202504030802.2lEVBSpN-lkp@intel.com/
Use instruction mnemonics with implicit operands to
work around this issue.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20250403125111.429805-1-ubizjak@gmail.com
All functions in mwait_idle_with_hints() cast eax and ecx arguments
to u32. Propagate argument type to the enclosing function.
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250403073105.245987-1-ubizjak@gmail.com
Have it return the two things it does return:
- a new ASID and
- the need to flush the TLB or not,
in a struct which fits in a single 32-bit register and whack the IO
parameters.
Beyond being easier to read, this also helps the compiler generate
better, more compact code:
# arch/x86/mm/tlb.o:
text data bss dec hex filename
9341 753 516 10610 2972 tlb.o.before
9213 753 516 10482 28f2 tlb.o.after
No functional changes.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250403085623.20824-1-bp@kernel.org
There is not much point in CONFIG_AS_TPAUSE at all when the emitted
assembly is always the same - it only obfuscates the __tpause() code
in essence.
Remove the TPAUSE insn mnemonic from __tpause() and leave only
the equivalent byte-wise definition. This can then be changed
back to insn mnemonic once binutils 2.31.1 is the minimum version
to build the kernel. (Right now it's 2.25.)
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250402180827.3762-4-ubizjak@gmail.com
Delimiters in asm() templates such as ';', '\t' or '\n' are not
required syntactically, they were used historically in the Linux
kernel to prettify the compiler's .s output for people who were
looking at compiler generated .s output.
Most x86 developers these days are primarily looking at:
1) objdump --disassemble-all .o
2) perf top's live kernel function annotation and disassembler
feature that uses /dev/mem.
... because:
- this kind of assembler output is standardized regardless of
compiler used,
- it's generally less messy looking,
- it gives ground-truth instead of being some intermediate layer
in the toolchain that might or might not be the real deal,
- and on a live kernel it also sees through the kernel's various
layers of runtime patching code obfuscation facilities, also
known as: alternative-instructions, tracepoints and jump labels.
There are some cases where the .s output is the most useful
tool, such as alternatives() code generation, but other than
that these delimiters used in simple asm() statements mostly
add noise to the source code side, which isn't desirable for
assembly code that is fragile enough already.
Remove the delimiters for <asm/mwait.h>, which also happens to
make the GCC inliner's asm() instruction length heuristics
more accurate...
[ mingo: Wrote a new changelog to give historic context and
to give people a chance to object. :-) ]
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250402180827.3762-3-ubizjak@gmail.com
- Add support for Global Persistent Flush (GPF)
- Cleanup of DPA partition metadata handling
- Remove the CXL_DECODER_MIXED enum that's not needed anymore
- Introduce helpers to access resource and perf meta data
- Introduce 'struct cxl_dpa_partition' and 'struct cxl_range_info'
- Make cxl_dpa_alloc() DPA partition number agnostic
- Remove cxl_decoder_mode
- Cleanup partition size and perf helpers
- Remove unused CXL partition values
- Add logging support for CXL CPER endpoint and port protocol errors
- Prefix protocol error struct and function names with cxl_
- Move protocol error definitions and structures to a common location
- Remove drivers/firmware/efi/cper_cxl.h to include/linux/cper.h
- Add support in GHES to process CXL CPER protocol errors
- Process CXL CPER protocol errors
- Add trace logging for CXL PCIe port RAS errors
- Remove redundant gp_port init
- Add validation of cxl device serial number
- CXL ABI documentation updates/fixups
- A series that uses guard() to clean up open coded mutex lockings and remove gotos for error
handling.
- Some followup patches to support dirty shutdown accounting
- Add helper to retrieve DVSEC offset for dirty shutdown registers
- Rename cxl_get_dirty_shutdown() to cxl_arm_dirty_shutdown()
- Add support for dirty shutdown count via sysfs
- cxl_test support for dirty shutdown
- A series to support CXL mailbox Features commands. Mostly in preparation for CXL EDAC
code to utilize the Features commands. It's also in preparation for CXL fwctl support
to utilize the CXL Features. The commands include "Get Supported Features", "Get Feature",
and "Set Feature".
- A series to support extended linear cache support described by the ACPI HMAT table. The
addition helps enumerate the cache and also provides additional RAS reporting support for
configuration with extended linear cache. (and related fixes for the
series).
- An update to cxl_test to support a 3-way capable CFMWS.
- A documentation fix to remove unused "mixed mode".
-----BEGIN PGP SIGNATURE-----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=ZME1
-----END PGP SIGNATURE-----
Merge tag 'cxl-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull Compute Express Link (CXL) updates from Dave Jiang:
- Add support for Global Persistent Flush (GPF)
- Cleanup of DPA partition metadata handling:
- Remove the CXL_DECODER_MIXED enum that's not needed anymore
- Introduce helpers to access resource and perf meta data
- Introduce 'struct cxl_dpa_partition' and 'struct cxl_range_info'
- Make cxl_dpa_alloc() DPA partition number agnostic
- Remove cxl_decoder_mode
- Cleanup partition size and perf helpers
- Remove unused CXL partition values
- Add logging support for CXL CPER endpoint and port protocol errors:
- Prefix protocol error struct and function names with cxl_
- Move protocol error definitions and structures to a common location
- Remove drivers/firmware/efi/cper_cxl.h to include/linux/cper.h
- Add support in GHES to process CXL CPER protocol errors
- Process CXL CPER protocol errors
- Add trace logging for CXL PCIe port RAS errors
- Remove redundant gp_port init
- Add validation of cxl device serial number
- CXL ABI documentation updates/fixups
- A series that uses guard() to clean up open coded mutex lockings and
remove gotos for error handling.
- Some followup patches to support dirty shutdown accounting:
- Add helper to retrieve DVSEC offset for dirty shutdown registers
- Rename cxl_get_dirty_shutdown() to cxl_arm_dirty_shutdown()
- Add support for dirty shutdown count via sysfs
- cxl_test support for dirty shutdown
- A series to support CXL mailbox Features commands.
Mostly in preparation for CXL EDAC code to utilize the Features
commands. It's also in preparation for CXL fwctl support to utilize
the CXL Features. The commands include "Get Supported Features", "Get
Feature", and "Set Feature".
- A series to support extended linear cache support described by the
ACPI HMAT table.
The addition helps enumerate the cache and also provides additional
RAS reporting support for configuration with extended linear cache.
(and related fixes for the series).
- An update to cxl_test to support a 3-way capable CFMWS
- A documentation fix to remove unused "mixed mode"
* tag 'cxl-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (39 commits)
cxl/region: Fix the first aliased address miscalculation
cxl/region: Quiet some dev_warn()s in extended linear cache setup
cxl/Documentation: Remove 'mixed' from sysfs mode doc
cxl: Fix warning from emitting resource_size_t as long long int on 32bit systems
cxl/test: Define a CFMWS capable of a 3 way HB interleave
cxl/mem: Do not return error if CONFIG_CXL_MCE unset
tools/testing/cxl: Set Shutdown State support
cxl/pmem: Export dirty shutdown count via sysfs
cxl/pmem: Rename cxl_dirty_shutdown_state()
cxl/pci: Introduce cxl_gpf_get_dvsec()
cxl/pci: Support Global Persistent Flush (GPF)
cxl: Document missing sysfs files
cxl: Plug typos in ABI doc
cxl/pmem: debug invalid serial number data
cxl/cdat: Remove redundant gp_port initialization
cxl/memdev: Remove unused partition values
cxl/region: Drop goto pattern of construct_region()
cxl/region: Drop goto pattern in cxl_dax_region_alloc()
cxl/core: Use guard() to drop goto pattern of cxl_dpa_alloc()
cxl/core: Use guard() to drop the goto pattern of cxl_dpa_free()
...
MONITOR and MONITORX expect 32-bit unsigned integer arguments in the %ecx
and %edx registers. MWAIT and MWAITX expect 32-bit usigned int
argument in %eax and %ecx registers.
Some of the helpers around these instructions in <asm/mwait.h> are using
too wide types (long), standardize on u32 instead that makes it clear that
this is a hardware ABI.
[ mingo: Cleaned up the changelog. ]
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250402180827.3762-1-ubizjak@gmail.com
The following commit, 12 years ago:
7e98b71920 ("x86, idle: Use static_cpu_has() for CLFLUSH workaround, add barriers")
added barriers around the CLFLUSH in mwait_idle_with_hints(), justified with:
... and add memory barriers around it since the documentation is explicit
that CLFLUSH is only ordered with respect to MFENCE.
This also triggered, 11 years ago, the same adjustment in:
f8e617f458 ("sched/idle/x86: Optimize unnecessary mwait_idle() resched IPIs")
during development, although it failed to get the static_cpu_has_bug() treatment.
X86_BUG_CLFLUSH_MONITOR (a.k.a the AAI65 errata) is specific to Intel CPUs,
and the SDM currently states:
Executions of the CLFLUSH instruction are ordered with respect to each
other and with respect to writes, locked read-modify-write instructions,
and fence instructions[1].
With footnote 1 reading:
Earlier versions of this manual specified that executions of the CLFLUSH
instruction were ordered only by the MFENCE instruction. All processors
implementing the CLFLUSH instruction also order it relative to the other
operations enumerated above.
i.e. The SDM was incorrect at the time, and barriers should not have been
inserted. Double checking the original AAI65 errata (not available from
intel.com any more) shows no mention of barriers either.
Note: If this were a general codepath, the MFENCEs would be needed, because
AMD CPUs of the same vintage do sport otherwise-unordered CLFLUSHs.
Remove the unnecessary barriers. Furthermore, use a plain alternative(),
rather than static_cpu_has_bug() and/or no optimisation. The workaround
is a single instruction.
Use an explicit %rax pointer rather than a general memory operand, because
MONITOR takes the pointer implicitly in the same way.
[ mingo: Cleaned up the commit a bit. ]
Fixes: 7e98b71920 ("x86, idle: Use static_cpu_has() for CLFLUSH workaround, add barriers")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20250402172458.1378112-1-andrew.cooper3@citrix.com
- proper nofault accesses and read-only rodata
- hostfs fix for host inode number reuse
- fixes for host errno handling
- various cleanups/small fixes
-----BEGIN PGP SIGNATURE-----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=MSjq
-----END PGP SIGNATURE-----
Merge tag 'uml-for-linux-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux
Pull UML updates from Johannes Berg:
- proper nofault accesses and read-only rodata
- hostfs fix for host inode number reuse
- fixes for host errno handling
- various cleanups/small fixes
* tag 'uml-for-linux-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux:
um: Rewrite the sigio workaround based on epoll and tgkill
um: Prohibit the VM_CLONE flag in run_helper_thread()
um: Switch to the pthread-based helper in sigio workaround
um: ubd: Switch to the pthread-based helper
um: Add pthread-based helper support
um: x86: clean up elf specific definitions
um: Store full CSGSFS and SS register from mcontext
um: virt-pci: Refactor virtio_pcidev into its own module
um: work around sched_yield not yielding in time-travel mode
um/locking: Remove semicolon from "lock" prefix
um: Update min_low_pfn to match changes in uml_reserved
um: use str_yes_no() to remove hardcoded "yes" and "no"
um: hostfs: avoid issues on inode number reuse by host
um: Allocate vdso page pointer statically
um: remove copy_from_kernel_nofault_allowed
um: mark rodata read-only and implement _nofault accesses
um: Pass the correct Rust target and options with gcc
-----BEGIN PGP SIGNATURE-----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=XvoD
-----END PGP SIGNATURE-----
Merge tag 'x86_tdx_for_6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 TDX updates from Dave Hansen:
"Avoid direct HLT instruction execution in TDX guests.
TDX guests aren't expected to use the HLT instruction directly. It
causes a virtualization exception (#VE). While the #VE _can_ be
handled, the current handling is slow and buggy and the easiest thing
is just to avoid HLT in the first place. Plus, the kernel already has
paravirt infrastructure that makes it relatively painless.
Make TDX guests require paravirt and add some TDX-specific paravirt
handlers which avoid HLT in the normal halt routines. Also add a
warning in case another HLT sneaks in.
There was a report that this leads to a "major performance
improvement" on specjbb2015, probably because of the extra #VE
overhead or missed wakeups from the buggy HLT handling"
* tag 'x86_tdx_for_6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tdx: Emit warning if IRQs are enabled during HLT #VE handling
x86/tdx: Fix arch_safe_halt() execution for TDX VMs
x86/paravirt: Move halt paravirt calls under CONFIG_PARAVIRT
around the fallout from the new CONFIG_OBJTOOL_WERROR=y feature,
which, despite its default-off nature, increased the profile/impact
of objtool warnings:
- Improve error handling and the presentation of warnings/errors.
- Revert the new summary warning line that some test-bot tools
interpreted as new regressions.
- Fix a number of objtool warnings in various drivers, core kernel
code and architecture code. About half of them are potential
problems related to out-of-bounds accesses or potential undefined
behavior, the other half are additional objtool annotations.
- Update objtool to latest (known) compiler quirks and
objtool bugs triggered by compiler code generation
- Misc fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=KkiI
-----END PGP SIGNATURE-----
Merge tag 'objtool-urgent-2025-04-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Ingo Molnar:
"These are objtool fixes and updates by Josh Poimboeuf, centered around
the fallout from the new CONFIG_OBJTOOL_WERROR=y feature, which,
despite its default-off nature, increased the profile/impact of
objtool warnings:
- Improve error handling and the presentation of warnings/errors
- Revert the new summary warning line that some test-bot tools
interpreted as new regressions
- Fix a number of objtool warnings in various drivers, core kernel
code and architecture code. About half of them are potential
problems related to out-of-bounds accesses or potential undefined
behavior, the other half are additional objtool annotations
- Update objtool to latest (known) compiler quirks and objtool bugs
triggered by compiler code generation
- Misc fixes"
* tag 'objtool-urgent-2025-04-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
objtool/loongarch: Add unwind hints in prepare_frametrace()
rcu-tasks: Always inline rcu_irq_work_resched()
context_tracking: Always inline ct_{nmi,irq}_{enter,exit}()
sched/smt: Always inline sched_smt_active()
objtool: Fix verbose disassembly if CROSS_COMPILE isn't set
objtool: Change "warning:" to "error: " for fatal errors
objtool: Always fail on fatal errors
Revert "objtool: Increase per-function WARN_FUNC() rate limit"
objtool: Append "()" to function name in "unexpected end of section" warning
objtool: Ignore end-of-section jumps for KCOV/GCOV
objtool: Silence more KCOV warnings, part 2
objtool, drm/vmwgfx: Don't ignore vmw_send_msg() for ORC
objtool: Fix STACK_FRAME_NON_STANDARD for cold subfunctions
objtool: Fix segfault in ignore_unreachable_insn()
objtool: Fix NULL printf() '%s' argument in builtin-check.c:save_argv()
objtool, lkdtm: Obfuscate the do_nothing() pointer
objtool, regulator: rk808: Remove potential undefined behavior in rk806_set_mode_dcdc()
objtool, ASoC: codecs: wcd934x: Remove potential undefined behavior in wcd934x_slim_irq_handler()
objtool, Input: cyapa - Remove undefined behavior in cyapa_update_fw_store()
objtool, panic: Disable SMAP in __stack_chk_fail()
...
The x86 has already been converted to use struct ptdesc, so convert it to
use tlb_remove_ptdesc() instead of tlb_remove_table().
Link: https://lkml.kernel.org/r/36ad56b7e06fa4b17fb23c4fc650e8e0d72bb3cd.1740454179.git.zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickens <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Matthew Wilcow (Oracle) <willy@infradead.org>
Cc: "Mike Rapoport (IBM)" <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The prefetchw() dates back decades and the fundamental notion of doing
something like this on a lock is shady.
Moreover, for a few years now in the fast path faults are handled with RCU
+ per-vma locking, hopefully not even looking at the lock to begin with.
As such just remove it.
I did not see a point benchmarking this. Given that it is not expected
to be looked at by default justifies not doing the prefetch.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250401143520.1113572-1-mjguzik@gmail.com
P4D huge pages are not supported yet, let's use the generic definition
in <linux/pgtable.h>.
[ mingo: Cleaned up the changelog. ]
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Link: https://lore.kernel.org/r/20250331081327.256412-7-bhe@redhat.com
PGD huge pages are not supported yet, let's use the generic definition
in <linux/pgtable.h>.
[ mingo: Cleaned up the changelog. ]
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Link: https://lore.kernel.org/r/20250331081327.256412-6-bhe@redhat.com
Upon a wakeup from S4, the restore kernel starts and initializes the
FRED MSRs as needed from its perspective. It then loads a hibernation
image, including the image kernel, and attempts to load image pages
directly into their original page frames used before hibernation unless
those frames are currently in use. Once all pages are moved to their
original locations, it jumps to a "trampoline" page in the image kernel.
At this point, the image kernel takes control, but the FRED MSRs still
contain values set by the restore kernel, which may differ from those
set by the image kernel before hibernation. Therefore, the image kernel
must ensure the FRED MSRs have the same values as before hibernation.
Since these values depend only on the location of the kernel text and
data, they can be recomputed from scratch.
Reported-by: Xi Pardee <xi.pardee@intel.com>
Reported-by: Todd Brandt <todd.e.brandt@intel.com>
Tested-by: Todd Brandt <todd.e.brandt@intel.com>
Suggested-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250401075728.3626147-1-xin@zytor.com
Convert the last remaining printk() in nmi.c to pr_info(). Along with
it, use timespec macros to calculate the NMI handler duration.
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Link: https://lore.kernel.org/r/20250327234629.3953536-10-sohil.mehta@intel.com
The expected_testcase_failures variable in the NMI selftest has never
been set since its introduction. Remove this unused variable along with
the related checks to simplify the code.
While at it, replace printk() with the corresponding pr_{cont,info}()
calls. Also, get rid of the superfluous testname wrapper and the
redundant file path comment.
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Link: https://lore.kernel.org/r/20250327234629.3953536-9-sohil.mehta@intel.com
NMI handlers can be registered by various subsystems, including drivers.
However, the interface for registering and unregistering such handlers
is not clearly documented. In the future, the interface may need to be
extended to identify the source of the NMI.
Add documentation to make the current API more understandable and easier
to use.
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Link: https://lore.kernel.org/r/20250327234629.3953536-8-sohil.mehta@intel.com
Some of the comments in the default NMI handling code are out of place
or inadequate. Move them to the appropriate locations and update them as
needed.
Move the comment related to CPU-specific NMIs closer to the actual code.
Also, add more details about how back-to-back NMIs are detected since
that isn't immediately obvious.
Opportunistically, replace an #ifdef section in the vicinity with an
IS_ENABLED() check to make the code easier to read.
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Kai Huang <kai.huang@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Link: https://lore.kernel.org/r/20250327234629.3953536-7-sohil.mehta@intel.com
The comment in unknown_nmi_error() is incorrect and misleading. There
is no longer a restriction on having a single Unknown NMI handler. Also,
nmi_handle() never used the 'b2b' parameter.
The commits that made the comment outdated are:
0d443b70cc ("x86/platform: Remove warning message for duplicate NMI handlers")
bf9f2ee28d ("x86/nmi: Remove the 'b2b' parameter from nmi_handle()")
Remove the old comment and update it to reflect the current logic.
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Link: https://lore.kernel.org/r/20250327234629.3953536-6-sohil.mehta@intel.com
Commit:
feb6cd6a0f ("thermal/intel_powerclamp: stop sched tick in forced idle")
got rid of the last exported user of local_touch_nmi() a while back.
Remove the unnecessary export.
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Link: https://lore.kernel.org/r/20250327234629.3953536-5-sohil.mehta@intel.com
The NMI descriptors for each NMI type are stored in an array. However,
they are currently initialized using raw numbers, which makes it
difficult to understand the code.
Introduce a macro to initialize the NMI descriptors using the NMI type
enum values to make the code more readable.
No functional change intended.
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Link: https://lore.kernel.org/r/20250327234629.3953536-4-sohil.mehta@intel.com
Commit:
c305a4e983 ("x86: Move sysctls into arch/x86")
recently moved the sysctl handling of panic_on_unrecovered_nmi and
panic_on_io_nmi to x86-specific code. These variables no longer need to
be declared in the generic header file.
Relocate the variable definitions and declarations closer to where they
are used. This makes all the NMI panic options consistent and easier to
track.
[ mingo: Fixed up the SHA1 of the commit reference. ]
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Cc: Joel Granados <joel.granados@kernel.org>
Link: https://lore.kernel.org/r/20250327234629.3953536-3-sohil.mehta@intel.com
The unknown_nmi_panic variable is used to control whether the kernel
should panic on unknown NMIs. There is a sysctl entry under:
/proc/sys/kernel/unknown_nmi_panic
which can be used to change the behavior at runtime.
However, it seems that in some places, the option unnecessarily depends
on CONFIG_X86_LOCAL_APIC. Other code in nmi.c uses unknown_nmi_panic
without such a dependency. This results in a few messy #ifdefs
splattered across the code. The dependency was likely introduce due to a
potential build bug reported a long time ago:
https://lore.kernel.org/lkml/40BC67F9.3000609@myrealbox.com/
This build bug no longer exists.
Also, similar NMI panic options, such as panic_on_unrecovered_nmi and
panic_on_io_nmi, do not have an explicit dependency on the local APIC
either.
Though, it's hard to imagine a production system without the local APIC
configuration, making a specific NMI sysctl option dependent on it
doesn't make sense.
Remove the explicit dependency between unknown NMI handling and the
local APIC to make the code cleaner and more consistent.
While at it, reorder the header includes to maintain alphabetical order.
[ mingo: Cleaned up the changelog a bit, truly ordered the headers ... ]
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Link: https://lore.kernel.org/r/20250327234629.3953536-2-sohil.mehta@intel.com
The last use of iosf_mbi_unregister_pmic_bus_access_notifier() was
removed in 2017 by:
a5266db4d3 ("drm/i915: Acquire PUNIT->PMIC bus for intel_uncore_forcewake_reset()")
Remove it.
(Note that the '_unlocked' version is still used.)
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tursulin@ursulin.net>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Link: https://lore.kernel.org/r/20241225175010.91783-1-linux@treblig.org
Here is the big set of driver core updates for 6.15-rc1. Lots of stuff
happened this development cycle, including:
- kernfs scaling changes to make it even faster thanks to rcu
- bin_attribute constify work in many subsystems
- faux bus minor tweaks for the rust bindings
- rust binding updates for driver core, pci, and platform busses,
making more functionaliy available to rust drivers. These are all
due to people actually trying to use the bindings that were in 6.14.
- make Rafael and Danilo full co-maintainers of the driver core
codebase
- other minor fixes and updates.
This has been in linux-next for a while now, with the only reported
issue being some merge conflicts with the rust tree. Depending on which
tree you pull first, you will have conflicts in one of them. The merge
resolution has been in linux-next as an example of what to do, or can be
found here:
https://lore.kernel.org/r/CANiq72n3Xe8JcnEjirDhCwQgvWoE65dddWecXnfdnbrmuah-RQ@mail.gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ+mMrg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylRgwCdH58OE3BgL0uoFY5vFImStpmPtqUAoL5HpVWI
jtbJ+UuXGsnmO+JVNBEv
=gy6W
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updatesk from Greg KH:
"Here is the big set of driver core updates for 6.15-rc1. Lots of stuff
happened this development cycle, including:
- kernfs scaling changes to make it even faster thanks to rcu
- bin_attribute constify work in many subsystems
- faux bus minor tweaks for the rust bindings
- rust binding updates for driver core, pci, and platform busses,
making more functionaliy available to rust drivers. These are all
due to people actually trying to use the bindings that were in
6.14.
- make Rafael and Danilo full co-maintainers of the driver core
codebase
- other minor fixes and updates"
* tag 'driver-core-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (52 commits)
rust: platform: require Send for Driver trait implementers
rust: pci: require Send for Driver trait implementers
rust: platform: impl Send + Sync for platform::Device
rust: pci: impl Send + Sync for pci::Device
rust: platform: fix unrestricted &mut platform::Device
rust: pci: fix unrestricted &mut pci::Device
rust: device: implement device context marker
rust: pci: use to_result() in enable_device_mem()
MAINTAINERS: driver core: mark Rafael and Danilo as co-maintainers
rust/kernel/faux: mark Registration methods inline
driver core: faux: only create the device if probe() succeeds
rust/faux: Add missing parent argument to Registration::new()
rust/faux: Drop #[repr(transparent)] from faux::Registration
rust: io: fix devres test with new io accessor functions
rust: io: rename `io::Io` accessors
kernfs: Move dput() outside of the RCU section.
efi: rci2: mark bin_attribute as __ro_after_init
rapidio: constify 'struct bin_attribute'
firmware: qemu_fw_cfg: constify 'struct bin_attribute'
powerpc/perf/hv-24x7: Constify 'struct bin_attribute'
...
reservation" from Sourabh Jain changes powerpc's kexec code to use more
of the generic layers.
- The 2 patch series "get_maintainer: report subsystem status
separately" from Vlastimil Babka makes some long-requested improvements
to the get_maintainer output.
- The 4 patch series "ucount: Simplify refcounting with rcuref_t" from
Sebastian Siewior cleans up and optimizing the refcounting in the ucount
code.
- The 12 patch series "reboot: support runtime configuration of
emergency hw_protection action" from Ahmad Fatoum improves the ability
for a driver to perform an emergency system shutdown or reboot.
- The 16 patch series "Converge on using secs_to_jiffies() part two"
from Easwar Hariharan performs further migrations from
msecs_to_jiffies() to secs_to_jiffies().
- The 7 patch series "lib/interval_tree: add some test cases and
cleanup" from Wei Yang permits more userspace testing of kernel library
code, adds some more tests and performs some cleanups.
- The 2 patch series "hung_task: Dump the blocking task stacktrace" from
Masami Hiramatsu arranges for the hung_task detector to dump the stack
of the blocking task and not just that of the blocked task.
- The 4 patch series "resource: Split and use DEFINE_RES*() macros" from
Andy Shevchenko provides some cleanups to the resource definition
macros.
- Plus the usual shower of singleton patches - please see the individual
changelogs for details.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZ+nuqwAKCRDdBJ7gKXxA
jtNqAQDxqJpjWkzn4yN9CNSs1ivVx3fr6SqazlYCrt3u89WQvwEA1oRrGpETzUGq
r6khQUIcQImPPcjFqEFpuiSOU0MBZA0=
=Kii8
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2025-03-30-18-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- The series "powerpc/crash: use generic crashkernel reservation" from
Sourabh Jain changes powerpc's kexec code to use more of the generic
layers.
- The series "get_maintainer: report subsystem status separately" from
Vlastimil Babka makes some long-requested improvements to the
get_maintainer output.
- The series "ucount: Simplify refcounting with rcuref_t" from
Sebastian Siewior cleans up and optimizing the refcounting in the
ucount code.
- The series "reboot: support runtime configuration of emergency
hw_protection action" from Ahmad Fatoum improves the ability for a
driver to perform an emergency system shutdown or reboot.
- The series "Converge on using secs_to_jiffies() part two" from Easwar
Hariharan performs further migrations from msecs_to_jiffies() to
secs_to_jiffies().
- The series "lib/interval_tree: add some test cases and cleanup" from
Wei Yang permits more userspace testing of kernel library code, adds
some more tests and performs some cleanups.
- The series "hung_task: Dump the blocking task stacktrace" from Masami
Hiramatsu arranges for the hung_task detector to dump the stack of
the blocking task and not just that of the blocked task.
- The series "resource: Split and use DEFINE_RES*() macros" from Andy
Shevchenko provides some cleanups to the resource definition macros.
- Plus the usual shower of singleton patches - please see the
individual changelogs for details.
* tag 'mm-nonmm-stable-2025-03-30-18-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (77 commits)
mailmap: consolidate email addresses of Alexander Sverdlin
fs/procfs: fix the comment above proc_pid_wchan()
relay: use kasprintf() instead of fixed buffer formatting
resource: replace open coded variant of DEFINE_RES()
resource: replace open coded variants of DEFINE_RES_*_NAMED()
resource: replace open coded variant of DEFINE_RES_NAMED_DESC()
resource: split DEFINE_RES_NAMED_DESC() out of DEFINE_RES_NAMED()
samples: add hung_task detector mutex blocking sample
hung_task: show the blocker task if the task is hung on mutex
kexec_core: accept unaccepted kexec segments' destination addresses
watchdog/perf: optimize bytes copied and remove manual NUL-termination
lib/interval_tree: fix the comment of interval_tree_span_iter_next_gap()
lib/interval_tree: skip the check before go to the right subtree
lib/interval_tree: add test case for span iteration
lib/interval_tree: add test case for interval_tree_iter_xxx() helpers
lib/rbtree: add random seed
lib/rbtree: split tests
lib/rbtree: enable userland test suite for rbtree related data structure
checkpatch: describe --min-conf-desc-length
scripts/gdb/symbols: determine KASLR offset on s390
...
Uros Bizjak uses x86 named address space qualifiers to provide
compile-time checking of percpu area accesses.
This has caused a small amount of fallout - two or three issues were
reported. In all cases the calling code was founf to be incorrect.
- The 4 patch series "Some cleanup for memcg" from Chen Ridong
implements some relatively monir cleanups for the memcontrol code.
- The 17 patch series "mm: fixes for device-exclusive entries (hmm)"
from David Hildenbrand fixes a boatload of issues which David found then
using device-exclusive PTE entries when THP is enabled. More work is
needed, but this makes thins better - our own HMM selftests now succeed.
- The 2 patch series "mm: zswap: remove z3fold and zbud" from Yosry
Ahmed remove the z3fold and zbud implementations. They have been
deprecated for half a year and nobody has complained.
- The 5 patch series "mm: further simplify VMA merge operation" from
Lorenzo Stoakes implements numerous simplifications in this area. No
runtime effects are anticipated.
- The 4 patch series "mm/madvise: remove redundant mmap_lock operations
from process_madvise()" from SeongJae Park rationalizes the locking in
the madvise() implementation. Performance gains of 20-25% were observed
in one MADV_DONTNEED microbenchmark.
- The 12 patch series "Tiny cleanup and improvements about SWAP code"
from Baoquan He contains a number of touchups to issues which Baoquan
noticed when working on the swap code.
- The 2 patch series "mm: kmemleak: Usability improvements" from Catalin
Marinas implements a couple of improvements to the kmemleak user-visible
output.
- The 2 patch series "mm/damon/paddr: fix large folios access and
schemes handling" from Usama Arif provides a couple of fixes for DAMON's
handling of large folios.
- The 3 patch series "mm/damon/core: fix wrong and/or useless
damos_walk() behaviors" from SeongJae Park fixes a few issues with the
accuracy of kdamond's walking of DAMON regions.
- The 3 patch series "expose mapping wrprotect, fix fb_defio use" from
Lorenzo Stoakes changes the interaction between framebuffer deferred-io
and core MM. No functional changes are anticipated - this is
preparatory work for the future removal of page structure fields.
- The 4 patch series "mm/damon: add support for hugepage_size DAMOS
filter" from Usama Arif adds a DAMOS filter which permits the filtering
by huge page sizes.
- The 4 patch series "mm: permit guard regions for file-backed/shmem
mappings" from Lorenzo Stoakes extends the guard region feature from its
present "anon mappings only" state. The feature now covers shmem and
file-backed mappings.
- The 4 patch series "mm: batched unmap lazyfree large folios during
reclamation" from Barry Song cleans up and speeds up the unmapping for
pte-mapped large folios.
- The 18 patch series "reimplement per-vma lock as a refcount" from
Suren Baghdasaryan puts the vm_lock back into the vma. Our reasons for
pulling it out were largely bogus and that change made the code more
messy. This patchset provides small (0-10%) improvements on one
microbenchmark.
- The 5 patch series "Docs/mm/damon: misc DAMOS filters documentation
fixes and improves" from SeongJae Park does some maintenance work on the
DAMON docs.
- The 27 patch series "hugetlb/CMA improvements for large systems" from
Frank van der Linden addresses a pile of issues which have been observed
when using CMA on large machines.
- The 2 patch series "mm/damon: introduce DAMOS filter type for unmapped
pages" from SeongJae Park enables users of DMAON/DAMOS to filter my the
page's mapped/unmapped status.
- The 19 patch series "zsmalloc/zram: there be preemption" from Sergey
Senozhatsky teaches zram to run its compression and decompression
operations preemptibly.
- The 12 patch series "selftests/mm: Some cleanups from trying to run
them" from Brendan Jackman fixes a pile of unrelated issues which
Brendan encountered while runnimg our selftests.
- The 2 patch series "fs/proc/task_mmu: add guard region bit to pagemap"
from Lorenzo Stoakes permits userspace to use /proc/pid/pagemap to
determine whether a particular page is a guard page.
- The 7 patch series "mm, swap: remove swap slot cache" from Kairui Song
removes the swap slot cache from the allocation path - it simply wasn't
being effective.
- The 5 patch series "mm: cleanups for device-exclusive entries (hmm)"
from David Hildenbrand implements a number of unrelated cleanups in this
code.
- The 5 patch series "mm: Rework generic PTDUMP configs" from Anshuman
Khandual implements a number of preparatoty cleanups to the
GENERIC_PTDUMP Kconfig logic.
- The 8 patch series "mm/damon: auto-tune aggregation interval" from
SeongJae Park implements a feedback-driven automatic tuning feature for
DAMON's aggregation interval tuning.
- The 5 patch series "Fix lazy mmu mode" from Ryan Roberts fixes some
issues in powerpc, sparc and x86 lazy MMU implementations. Ryan did
this in preparation for implementing lazy mmu mode for arm64 to optimize
vmalloc.
- The 2 patch series "mm/page_alloc: Some clarifications for migratetype
fallback" from Brendan Jackman reworks some commentary to make the code
easier to follow.
- The 3 patch series "page_counter cleanup and size reduction" from
Shakeel Butt cleans up the page_counter code and fixes a size increase
which we accidentally added late last year.
- The 3 patch series "Add a command line option that enables control of
how many threads should be used to allocate huge pages" from Thomas
Prescher does that. It allows the careful operator to significantly
reduce boot time by tuning the parallalization of huge page
initialization.
- The 3 patch series "Fix calculations in trace_balance_dirty_pages()
for cgwb" from Tang Yizhou fixes the tracing output from the dirty page
balancing code.
- The 9 patch series "mm/damon: make allow filters after reject filters
useful and intuitive" from SeongJae Park improves the handling of allow
and reject filters. Behaviour is made more consistent and the
documention is updated accordingly.
- The 5 patch series "Switch zswap to object read/write APIs" from Yosry
Ahmed updates zswap to the new object read/write APIs and thus permits
the removal of some legacy code from zpool and zsmalloc.
- The 6 patch series "Some trivial cleanups for shmem" from Baolin Wang
does as it claims.
- The 20 patch series "fs/dax: Fix ZONE_DEVICE page reference counts"
from Alistair Popple regularizes the weird ZONE_DEVICE page refcount
handling in DAX, permittig the removal of a number of special-case
checks.
- The 4 patch series "refactor mremap and fix bug" from Lorenzo Stoakes
is a preparatoty refactoring and cleanup of the mremap() code.
- The 20 patch series "mm: MM owner tracking for large folios (!hugetlb)
+ CONFIG_NO_PAGE_MAPCOUNT" from David Hildenbrand reworks the manner in
which we determine whether a large folio is known to be mapped
exclusively into a single MM.
- The 8 patch series "mm/damon: add sysfs dirs for managing DAMOS
filters based on handling layers" from SeongJae Park adds a couple of
new sysfs directories to ease the management of DAMON/DAMOS filters.
- The 13 patch series "arch, mm: reduce code duplication in mem_init()"
from Mike Rapoport consolidates many per-arch implementations of
mem_init() into code generic code, where that is practical.
- The 13 patch series "mm/damon/sysfs: commit parameters online via
damon_call()" from SeongJae Park continues the cleaning up of sysfs
access to DAMON internal data.
- The 3 patch series "mm: page_ext: Introduce new iteration API" from
Luiz Capitulino reworks the page_ext initialization to fix a boot-time
crash which was observed with an unusual combination of compile and
cmdline options.
- The 8 patch series "Buddy allocator like (or non-uniform) folio split"
from Zi Yan reworks the code to split a folio into smaller folios. The
main benefit is lessened memory consumption: fewer post-split folios are
generated.
- The 2 patch series "Minimize xa_node allocation during xarry split"
from Zi Yan reduces the number of xarray xa_nodes which are generated
during an xarray split.
- The 2 patch series "drivers/base/memory: Two cleanups" from Gavin Shan
performs some maintenance work on the drivers/base/memory code.
- The 3 patch series "Add tracepoints for lowmem reserves, watermarks
and totalreserve_pages" from Martin Liu adds some more tracepoints to
the page allocator code.
- The 4 patch series "mm/madvise: cleanup requests validations and
classifications" from SeongJae Park cleans up some warts which SeongJae
observed during his earlier madvise work.
- The 3 patch series "mm/hwpoison: Fix regressions in memory failure
handling" from Shuai Xue addresses two quite serious regressions which
Shuai has observed in the memory-failure implementation.
- The 5 patch series "mm: reliable huge page allocator" from Johannes
Weiner makes huge page allocations cheaper and more reliable by reducing
fragmentation.
- The 5 patch series "Minor memcg cleanups & prep for memdescs" from
Matthew Wilcox is preparatory work for the future implementation of
memdescs.
- The 4 patch series "track memory used by balloon drivers" from Nico
Pache introduces a way to track memory used by our various balloon
drivers.
- The 2 patch series "mm/damon: introduce DAMOS filter type for active
pages" from Nhat Pham permits users to filter for active/inactive pages,
separately for file and anon pages.
- The 2 patch series "Adding Proactive Memory Reclaim Statistics" from
Hao Jia separates the proactive reclaim statistics from the direct
reclaim statistics.
- The 2 patch series "mm/vmscan: don't try to reclaim hwpoison folio"
from Jinjiang Tu fixes our handling of hwpoisoned pages within the
reclaim code.
-----BEGIN PGP SIGNATURE-----
iHQEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZ+nZaAAKCRDdBJ7gKXxA
jsOWAPiP4r7CJHMZRK4eyJOkvS1a1r+TsIarrFZtjwvf/GIfAQCEG+JDxVfUaUSF
Ee93qSSLR1BkNdDw+931Pu0mXfbnBw==
=Pn2K
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2025-03-30-16-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- The series "Enable strict percpu address space checks" from Uros
Bizjak uses x86 named address space qualifiers to provide
compile-time checking of percpu area accesses.
This has caused a small amount of fallout - two or three issues were
reported. In all cases the calling code was found to be incorrect.
- The series "Some cleanup for memcg" from Chen Ridong implements some
relatively monir cleanups for the memcontrol code.
- The series "mm: fixes for device-exclusive entries (hmm)" from David
Hildenbrand fixes a boatload of issues which David found then using
device-exclusive PTE entries when THP is enabled. More work is
needed, but this makes thins better - our own HMM selftests now
succeed.
- The series "mm: zswap: remove z3fold and zbud" from Yosry Ahmed
remove the z3fold and zbud implementations. They have been deprecated
for half a year and nobody has complained.
- The series "mm: further simplify VMA merge operation" from Lorenzo
Stoakes implements numerous simplifications in this area. No runtime
effects are anticipated.
- The series "mm/madvise: remove redundant mmap_lock operations from
process_madvise()" from SeongJae Park rationalizes the locking in the
madvise() implementation. Performance gains of 20-25% were observed
in one MADV_DONTNEED microbenchmark.
- The series "Tiny cleanup and improvements about SWAP code" from
Baoquan He contains a number of touchups to issues which Baoquan
noticed when working on the swap code.
- The series "mm: kmemleak: Usability improvements" from Catalin
Marinas implements a couple of improvements to the kmemleak
user-visible output.
- The series "mm/damon/paddr: fix large folios access and schemes
handling" from Usama Arif provides a couple of fixes for DAMON's
handling of large folios.
- The series "mm/damon/core: fix wrong and/or useless damos_walk()
behaviors" from SeongJae Park fixes a few issues with the accuracy of
kdamond's walking of DAMON regions.
- The series "expose mapping wrprotect, fix fb_defio use" from Lorenzo
Stoakes changes the interaction between framebuffer deferred-io and
core MM. No functional changes are anticipated - this is preparatory
work for the future removal of page structure fields.
- The series "mm/damon: add support for hugepage_size DAMOS filter"
from Usama Arif adds a DAMOS filter which permits the filtering by
huge page sizes.
- The series "mm: permit guard regions for file-backed/shmem mappings"
from Lorenzo Stoakes extends the guard region feature from its
present "anon mappings only" state. The feature now covers shmem and
file-backed mappings.
- The series "mm: batched unmap lazyfree large folios during
reclamation" from Barry Song cleans up and speeds up the unmapping
for pte-mapped large folios.
- The series "reimplement per-vma lock as a refcount" from Suren
Baghdasaryan puts the vm_lock back into the vma. Our reasons for
pulling it out were largely bogus and that change made the code more
messy. This patchset provides small (0-10%) improvements on one
microbenchmark.
- The series "Docs/mm/damon: misc DAMOS filters documentation fixes and
improves" from SeongJae Park does some maintenance work on the DAMON
docs.
- The series "hugetlb/CMA improvements for large systems" from Frank
van der Linden addresses a pile of issues which have been observed
when using CMA on large machines.
- The series "mm/damon: introduce DAMOS filter type for unmapped pages"
from SeongJae Park enables users of DMAON/DAMOS to filter my the
page's mapped/unmapped status.
- The series "zsmalloc/zram: there be preemption" from Sergey
Senozhatsky teaches zram to run its compression and decompression
operations preemptibly.
- The series "selftests/mm: Some cleanups from trying to run them" from
Brendan Jackman fixes a pile of unrelated issues which Brendan
encountered while runnimg our selftests.
- The series "fs/proc/task_mmu: add guard region bit to pagemap" from
Lorenzo Stoakes permits userspace to use /proc/pid/pagemap to
determine whether a particular page is a guard page.
- The series "mm, swap: remove swap slot cache" from Kairui Song
removes the swap slot cache from the allocation path - it simply
wasn't being effective.
- The series "mm: cleanups for device-exclusive entries (hmm)" from
David Hildenbrand implements a number of unrelated cleanups in this
code.
- The series "mm: Rework generic PTDUMP configs" from Anshuman Khandual
implements a number of preparatoty cleanups to the GENERIC_PTDUMP
Kconfig logic.
- The series "mm/damon: auto-tune aggregation interval" from SeongJae
Park implements a feedback-driven automatic tuning feature for
DAMON's aggregation interval tuning.
- The series "Fix lazy mmu mode" from Ryan Roberts fixes some issues in
powerpc, sparc and x86 lazy MMU implementations. Ryan did this in
preparation for implementing lazy mmu mode for arm64 to optimize
vmalloc.
- The series "mm/page_alloc: Some clarifications for migratetype
fallback" from Brendan Jackman reworks some commentary to make the
code easier to follow.
- The series "page_counter cleanup and size reduction" from Shakeel
Butt cleans up the page_counter code and fixes a size increase which
we accidentally added late last year.
- The series "Add a command line option that enables control of how
many threads should be used to allocate huge pages" from Thomas
Prescher does that. It allows the careful operator to significantly
reduce boot time by tuning the parallalization of huge page
initialization.
- The series "Fix calculations in trace_balance_dirty_pages() for cgwb"
from Tang Yizhou fixes the tracing output from the dirty page
balancing code.
- The series "mm/damon: make allow filters after reject filters useful
and intuitive" from SeongJae Park improves the handling of allow and
reject filters. Behaviour is made more consistent and the documention
is updated accordingly.
- The series "Switch zswap to object read/write APIs" from Yosry Ahmed
updates zswap to the new object read/write APIs and thus permits the
removal of some legacy code from zpool and zsmalloc.
- The series "Some trivial cleanups for shmem" from Baolin Wang does as
it claims.
- The series "fs/dax: Fix ZONE_DEVICE page reference counts" from
Alistair Popple regularizes the weird ZONE_DEVICE page refcount
handling in DAX, permittig the removal of a number of special-case
checks.
- The series "refactor mremap and fix bug" from Lorenzo Stoakes is a
preparatoty refactoring and cleanup of the mremap() code.
- The series "mm: MM owner tracking for large folios (!hugetlb) +
CONFIG_NO_PAGE_MAPCOUNT" from David Hildenbrand reworks the manner in
which we determine whether a large folio is known to be mapped
exclusively into a single MM.
- The series "mm/damon: add sysfs dirs for managing DAMOS filters based
on handling layers" from SeongJae Park adds a couple of new sysfs
directories to ease the management of DAMON/DAMOS filters.
- The series "arch, mm: reduce code duplication in mem_init()" from
Mike Rapoport consolidates many per-arch implementations of
mem_init() into code generic code, where that is practical.
- The series "mm/damon/sysfs: commit parameters online via
damon_call()" from SeongJae Park continues the cleaning up of sysfs
access to DAMON internal data.
- The series "mm: page_ext: Introduce new iteration API" from Luiz
Capitulino reworks the page_ext initialization to fix a boot-time
crash which was observed with an unusual combination of compile and
cmdline options.
- The series "Buddy allocator like (or non-uniform) folio split" from
Zi Yan reworks the code to split a folio into smaller folios. The
main benefit is lessened memory consumption: fewer post-split folios
are generated.
- The series "Minimize xa_node allocation during xarry split" from Zi
Yan reduces the number of xarray xa_nodes which are generated during
an xarray split.
- The series "drivers/base/memory: Two cleanups" from Gavin Shan
performs some maintenance work on the drivers/base/memory code.
- The series "Add tracepoints for lowmem reserves, watermarks and
totalreserve_pages" from Martin Liu adds some more tracepoints to the
page allocator code.
- The series "mm/madvise: cleanup requests validations and
classifications" from SeongJae Park cleans up some warts which
SeongJae observed during his earlier madvise work.
- The series "mm/hwpoison: Fix regressions in memory failure handling"
from Shuai Xue addresses two quite serious regressions which Shuai
has observed in the memory-failure implementation.
- The series "mm: reliable huge page allocator" from Johannes Weiner
makes huge page allocations cheaper and more reliable by reducing
fragmentation.
- The series "Minor memcg cleanups & prep for memdescs" from Matthew
Wilcox is preparatory work for the future implementation of memdescs.
- The series "track memory used by balloon drivers" from Nico Pache
introduces a way to track memory used by our various balloon drivers.
- The series "mm/damon: introduce DAMOS filter type for active pages"
from Nhat Pham permits users to filter for active/inactive pages,
separately for file and anon pages.
- The series "Adding Proactive Memory Reclaim Statistics" from Hao Jia
separates the proactive reclaim statistics from the direct reclaim
statistics.
- The series "mm/vmscan: don't try to reclaim hwpoison folio" from
Jinjiang Tu fixes our handling of hwpoisoned pages within the reclaim
code.
* tag 'mm-stable-2025-03-30-16-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (431 commits)
mm/page_alloc: remove unnecessary __maybe_unused in order_to_pindex()
x86/mm: restore early initialization of high_memory for 32-bits
mm/vmscan: don't try to reclaim hwpoison folio
mm/hwpoison: introduce folio_contain_hwpoisoned_page() helper
cgroup: docs: add pswpin and pswpout items in cgroup v2 doc
mm: vmscan: split proactive reclaim statistics from direct reclaim statistics
selftests/mm: speed up split_huge_page_test
selftests/mm: uffd-unit-tests support for hugepages > 2M
docs/mm/damon/design: document active DAMOS filter type
mm/damon: implement a new DAMOS filter type for active pages
fs/dax: don't disassociate zero page entries
MM documentation: add "Unaccepted" meminfo entry
selftests/mm: add commentary about 9pfs bugs
fork: use __vmalloc_node() for stack allocation
docs/mm: Physical Memory: Populate the "Zones" section
xen: balloon: update the NR_BALLOON_PAGES state
hv_balloon: update the NR_BALLOON_PAGES state
balloon_compaction: update the NR_BALLOON_PAGES state
meminfo: add a per node counter for balloon drivers
mm: remove references to folio in __memcg_kmem_uncharge_page()
...
As Bert Karwatzki reported, the following recent commit causes a
performance regression on AMD iGPU and dGPU systems:
7ffb791423 ("x86/kaslr: Reduce KASLR entropy on most x86 systems")
It exposed a bug with nokaslr and zone device interaction.
The root cause of the bug is that, the GPU driver registers a zone
device private memory region. When KASLR is disabled or the above commit
is applied, the direct_map_physmem_end is set to much higher than 10 TiB
typically to the 64TiB address. When zone device private memory is added
to the system via add_pages(), it bumps up the max_pfn to the same
value. This causes dma_addressing_limited() to return true, since the
device cannot address memory all the way up to max_pfn.
This caused a regression for games played on the iGPU, as it resulted in
the DMA32 zone being used for GPU allocations.
Fix this by not bumping up max_pfn on x86 systems, when pgmap is passed
into add_pages(). The presence of pgmap is used to determine if device
private memory is being added via add_pages().
More details:
devm_request_mem_region() and request_free_mem_region() request for
device private memory. iomem_resource is passed as the base resource
with start and end parameters. iomem_resource's end depends on several
factors, including the platform and virtualization. On x86 for example
on bare metal, this value is set to boot_cpu_data.x86_phys_bits.
boot_cpu_data.x86_phys_bits can change depending on support for MKTME.
By default it is set to the same as log2(direct_map_physmem_end) which
is 46 to 52 bits depending on the number of levels in the page table.
The allocation routines used iomem_resource's end and
direct_map_physmem_end to figure out where to allocate the region.
[ arch/powerpc is also impacted by this problem, but this patch does not fix
the issue for PowerPC. ]
Testing:
1. Tested on a virtual machine with test_hmm for zone device inseration
2. A previous version of this patch was tested by Bert, please see:
https://lore.kernel.org/lkml/d87680bab997fdc9fb4e638983132af235d9a03a.camel@web.de/
[ mingo: Clarified the comments and the changelog. ]
Reported-by: Bert Karwatzki <spasswolf@web.de>
Tested-by: Bert Karwatzki <spasswolf@web.de>
Fixes: 7ffb791423 ("x86/kaslr: Reduce KASLR entropy on most x86 systems")
Signed-off-by: Balbir Singh <balbirs@nvidia.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Link: https://lore.kernel.org/r/20250401000752.249348-1-balbirs@nvidia.com
It turns out the code to generate the x86 cpufeaturemasks.h header was
way too aggressive, and would re-generate it whenever the timestamp on
the kernel config file changed.
Now, the regular 'make *config' tools are fairly careful to not rewrite
the kernel config file unless the contents change, but other usecases
aren't that careful.
Michael Kelley reports that 'make-kpkg' ends up doing "make syncconfig"
multiple times in prepping to build, and will modify the config file in
the process (and then modify it back, but by then the timestamps have
changed).
Jakub Kicinski reports that the netdev CI does something similar in how
it generates the config file in multiple steps.
In both cases, the config file timestamp updates then cause the
cpufeaturemasks.h file to be regenerated, and that in turn then causes
lots of unnecessary rebuilds due to all the normal dependencies.
Fix it by using our 'filechk' infrastructure in the Makefile to generate
the header file. That will only write a new version of the file if the
contents of the file have actually changed.
Fixes: 841326332b ("x86/cpufeatures: Generate the <asm/cpufeaturemasks.h> header based on build config")
Reported-by: Michael Kelley <mhklinux@outlook.com>
Reported-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/all/SN6PR02MB415756D1829740F6E8AC11D1D4D82@SN6PR02MB4157.namprd02.prod.outlook.com/
Link: https://lore.kernel.org/all/20250328162311.08134fa6@kernel.org/
Cc: Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Use RCU instead of RCU-sched
The mix of rcu_read_lock(), rcu_read_lock_sched() and preempt_disable()
in the module code and its users has been replaced with just
rcu_read_lock().
- The rest of changes are smaller fixes and updates.
The changes have been on linux-next for at least 2 weeks, with the RCU
cleanup present for 2 months. One performance problem was reported with the
RCU change when KASAN + lockdep were enabled, but it was effectively
addressed by the already merged ee57ab5a32 ("locking/lockdep: Disable
KASAN instrumentation of lockdep.c").
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEIduBR9MnFA82q/jtumpXJwqY6poFAmfmwrsUHHBldHIucGF2
bHVAc3VzZS5jb20ACgkQumpXJwqY6prWxgf/S7Pvdywm10vJ6fooYa+GxXNMwhyh
XRjZ4m9gjeTNf2KLwX0XHv0XZeFHOmHfjd3iI+pS6CXZnCFTN9J3XPLYsrTxXUb6
U6zzLf8Zsz8TzeI4dgvSBsZln7oICSACkAgdJCq23hpNKeaeRo91dgiZaIwyZJG3
FekqSFtP7pYhfFoNkrFKysqbgl1+RWWZ79L2qRJA0bPzVFlvRUuh6cOHQw+8RMqf
BYLwnArjTkW8AcXpxIXSiwphDHVZ81B96xoplavyoprA5FDpv1W+8y4DtxdWFn+1
QVWCs/ZV3KrwXWpZev625w3fIOOIXILqRINOzLfvXTw+1xFS3TzSQEpVeg==
=4OKc
-----END PGP SIGNATURE-----
Merge tag 'modules-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux
Pull modules updates from Petr Pavlu:
- Use RCU instead of RCU-sched
The mix of rcu_read_lock(), rcu_read_lock_sched() and
preempt_disable() in the module code and its users has
been replaced with just rcu_read_lock()
- The rest of changes are smaller fixes and updates
* tag 'modules-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux: (32 commits)
MAINTAINERS: Update the MODULE SUPPORT section
module: Remove unnecessary size argument when calling strscpy()
module: Replace deprecated strncpy() with strscpy()
params: Annotate struct module_param_attrs with __counted_by()
bug: Use RCU instead RCU-sched to protect module_bug_list.
static_call: Use RCU in all users of __module_text_address().
kprobes: Use RCU in all users of __module_text_address().
bpf: Use RCU in all users of __module_text_address().
jump_label: Use RCU in all users of __module_text_address().
jump_label: Use RCU in all users of __module_address().
x86: Use RCU in all users of __module_address().
cfi: Use RCU while invoking __module_address().
powerpc/ftrace: Use RCU in all users of __module_text_address().
LoongArch: ftrace: Use RCU in all users of __module_text_address().
LoongArch/orc: Use RCU in all users of __module_address().
arm64: module: Use RCU in all users of __module_text_address().
ARM: module: Use RCU in all users of __module_text_address().
module: Use RCU in all users of __module_text_address().
module: Use RCU in all users of __module_address().
module: Use RCU in search_module_extables().
...
- Fix a large number of x86 Kconfig dependency and help text accuracy
bugs/problems, by Mateusz Jończyk and David Heideberg.
- Fix a VM_PAT interaction with fork() crash. This also touches
core kernel code.
- Fix an ORC unwinder bug for interrupt entries
- Fixes and cleanups.
- Fix an AMD microcode loader bug that can promote verification failures
into success.
- Add early-printk support for MMIO based UARTs on an x86 board that
had no other serial debugging facility and also experienced early
boot crashes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=/qKX
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2025-03-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 fixes and updates from Ingo Molnar:
- Fix a large number of x86 Kconfig dependency and help text accuracy
bugs/problems, by Mateusz Jończyk and David Heideberg
- Fix a VM_PAT interaction with fork() crash. This also touches core
kernel code
- Fix an ORC unwinder bug for interrupt entries
- Fixes and cleanups
- Fix an AMD microcode loader bug that can promote verification
failures into success
- Add early-printk support for MMIO based UARTs on an x86 board that
had no other serial debugging facility and also experienced early
boot crashes
* tag 'x86-urgent-2025-03-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode/AMD: Fix __apply_microcode_amd()'s return value
x86/mm/pat: Fix VM_PAT handling when fork() fails in copy_page_range()
x86/fpu: Update the outdated comment above fpstate_init_user()
x86/early_printk: Add support for MMIO-based UARTs
x86/dumpstack: Fix inaccurate unwinding from exception stacks due to misplaced assignment
x86/entry: Fix ORC unwinder for PUSH_REGS with save_ret=1
x86/Kconfig: Fix lists in X86_EXTENDED_PLATFORM help text
x86/Kconfig: Correct X86_X2APIC help text
x86/speculation: Remove the extra #ifdef around CALL_NOSPEC
x86/Kconfig: Document release year of glibc 2.3.3
x86/Kconfig: Make CONFIG_PCI_CNB20LE_QUIRK depend on X86_32
x86/Kconfig: Document CONFIG_PCI_MMCONFIG
x86/Kconfig: Update lists in X86_EXTENDED_PLATFORM
x86/Kconfig: Move all X86_EXTENDED_PLATFORM options together
x86/Kconfig: Always enable ARCH_SPARSEMEM_ENABLE
x86/Kconfig: Enable X86_X2APIC by default and improve help text
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE+soXsSLHKoYyzcli6rmadz2vbToFAmfcq3kACgkQ6rmadz2v
bToxkw/8DHIqjVnzU2O9hbRM1anYo6yM8e34IxCt0ajHTSEVJ93+C161QDWo/6Dk
+RNlaeGekaBUk+QOLb4u+rzZ2eR/pWSm37xuDRAiBCQ+3MgR60gGRaSljpS3IUem
0FvS6C1HObBCEUXMU2rNv/5cJB5/qrQYa9FEEjRvBTLqgQkdS7yaW/KKuZaNb+Ts
KiEeWvPrPSZXStfRGy8Wr4eS2rYhxPAikUR+xde9CM+HtMWwKTCTSp8qXrqA92Dj
Cz9ix01scznuf78QCRDZp09im3lZys8ZQprmPgMxyEscN+CDL7n68wAhmTJq0uo3
3NqIv7zBQ8wMChj0f0HjwZ0Wrj7BJAveY2Q0RterxdzT4vMKdtNkThX46ISaCoX/
XQAAhZHemK6MvBJk+LKkqqMgrD+3FAzvY7O+SCyUBAMs4FK1myRJQihdLXHGfiBU
DMDZE1jsE8qBaeUbz4LIuCy8fx2LhtVwVNwbNIBUZHdyfjxIXnQT/8Cnrgklwy2i
tnYekhAsHDQY+QDkrvJpc4E1vUtiXwSDI5ErcnWdSzctEOyVeUg7OuuGD4riCd1c
emdJmtASM1z9Ajqa1dytDxVaF6wjKlbhQgnKamuex5JLGCK6makk8ZoB+DBfKYHD
VoWummTu8ldf+Dp4ehBh7AbeF2vn4kLqcF1PLRsBO6ytJs4HIt8=
=5O7h
-----END PGP SIGNATURE-----
Merge tag 'bpf_res_spin_lock' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf relisient spinlock support from Alexei Starovoitov:
"This patch set introduces Resilient Queued Spin Lock (or rqspinlock
with res_spin_lock() and res_spin_unlock() APIs).
This is a qspinlock variant which recovers the kernel from a stalled
state when the lock acquisition path cannot make forward progress.
This can occur when a lock acquisition attempt enters a deadlock
situation (e.g. AA, or ABBA), or more generally, when the owner of the
lock (which we’re trying to acquire) isn’t making forward progress.
Deadlock detection is the main mechanism used to provide instant
recovery, with the timeout mechanism acting as a final line of
defense. Detection is triggered immediately when beginning the waiting
loop of a lock slow path.
Additionally, BPF programs attached to different parts of the kernel
can introduce new control flow into the kernel, which increases the
likelihood of deadlocks in code not written to handle reentrancy.
There have been multiple syzbot reports surfacing deadlocks in
internal kernel code due to the diverse ways in which BPF programs can
be attached to different parts of the kernel. By switching the BPF
subsystem’s lock usage to rqspinlock, all of these issues are
mitigated at runtime.
This spin lock implementation allows BPF maps to become safer and
remove mechanisms that have fallen short in assuring safety when
nesting programs in arbitrary ways in the same context or across
different contexts.
We run benchmarks that stress locking scalability and perform
comparison against the baseline (qspinlock). For the rqspinlock case,
we replace the default qspinlock with it in the kernel, such that all
spin locks in the kernel use the rqspinlock slow path. As such,
benchmarks that stress kernel spin locks end up exercising rqspinlock.
More details in the cover letter in commit 6ffb9017e9 ("Merge branch
'resilient-queued-spin-lock'")"
* tag 'bpf_res_spin_lock' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (24 commits)
selftests/bpf: Add tests for rqspinlock
bpf: Maintain FIFO property for rqspinlock unlock
bpf: Implement verifier support for rqspinlock
bpf: Introduce rqspinlock kfuncs
bpf: Convert lpm_trie.c to rqspinlock
bpf: Convert percpu_freelist.c to rqspinlock
bpf: Convert hashtab.c to rqspinlock
rqspinlock: Add locktorture support
rqspinlock: Add entry to Makefile, MAINTAINERS
rqspinlock: Add macros for rqspinlock usage
rqspinlock: Add basic support for CONFIG_PARAVIRT
rqspinlock: Add a test-and-set fallback
rqspinlock: Add deadlock detection and recovery
rqspinlock: Protect waiters in trylock fallback from stalls
rqspinlock: Protect waiters in queue from stalls
rqspinlock: Protect pending bit owners from stalls
rqspinlock: Hardcode cond_acquire loops for arm64
rqspinlock: Add support for timeouts
rqspinlock: Drop PV and virtualization support
rqspinlock: Add rqspinlock.h header
...
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE+soXsSLHKoYyzcli6rmadz2vbToFAmfi6ZAACgkQ6rmadz2v
bTpLOg/+J7xUddPMhlpFAUlifQEadE5hmw6v1tXpM3zyKHzUWJiv/qsx3j8/ckgD
D+d4P8bqIbI9SSuIS4oZ0+D9pr/g7GYztnoYZmPiYJ7v2AijPuof5dsagFQE8E2y
rhfbt9KHTMzzkdkTvaAZaITS/HWAoJ2YVRB6gfLex2ghcXYHcgmtKRZniQrbBiFZ
MIXBN8Rg6HP+pUdIVllSXFcQCb3XIgjPONRAos4hr5tIm+3Ku7Jvkgk2H/9vUcoF
bdXAcg8xygyH7eY+1l3e7nEPQlG0jUZEsL+tq+vpdoLRLqlIpAUYmwUvqcmq4dPS
QGFjiUcpDbXlxsUFpzjXHIFto7fXCfND7HEICQPwAncdflIIfYaATSQUfkEexn0a
wBCFlAChrEzAmg2vFl4EeEr0fdSe/3jswrgKx0m6ctKieMjgloBUeeH4fXOpfkhS
9tvhuduVFuronlebM8ew4w9T/mBgbyxkE5KkvP4hNeB3ni3N0K6Mary5/u2HyN1e
lqTlnZxRA4p6lrvxce/mDrR4VSwlKLcSeQVjxAL1afD5KRkuZJnUv7bUhS361vkG
IjNrQX30EisDAz+X7tMn3ndBf9vVatwFT4+c3yaxlQRor1WofhDfT88HPiyB4QqQ
Kdx2EHgbQxJp4vkzhp4/OXlTfkihsMEn8egzZuphdPEQ9Y+Jdwg=
=aN/V
-----END PGP SIGNATURE-----
Merge tag 'bpf-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
"For this merge window we're splitting BPF pull request into three for
higher visibility: main changes, res_spin_lock, try_alloc_pages.
These are the main BPF changes:
- Add DFA-based live registers analysis to improve verification of
programs with loops (Eduard Zingerman)
- Introduce load_acquire and store_release BPF instructions and add
x86, arm64 JIT support (Peilin Ye)
- Fix loop detection logic in the verifier (Eduard Zingerman)
- Drop unnecesary lock in bpf_map_inc_not_zero() (Eric Dumazet)
- Add kfunc for populating cpumask bits (Emil Tsalapatis)
- Convert various shell based tests to selftests/bpf/test_progs
format (Bastien Curutchet)
- Allow passing referenced kptrs into struct_ops callbacks (Amery
Hung)
- Add a flag to LSM bpf hook to facilitate bpf program signing
(Blaise Boscaccy)
- Track arena arguments in kfuncs (Ihor Solodrai)
- Add copy_remote_vm_str() helper for reading strings from remote VM
and bpf_copy_from_user_task_str() kfunc (Jordan Rome)
- Add support for timed may_goto instruction (Kumar Kartikeya
Dwivedi)
- Allow bpf_get_netns_cookie() int cgroup_skb programs (Mahe Tardy)
- Reduce bpf_cgrp_storage_busy false positives when accessing cgroup
local storage (Martin KaFai Lau)
- Introduce bpf_dynptr_copy() kfunc (Mykyta Yatsenko)
- Allow retrieving BTF data with BTF token (Mykyta Yatsenko)
- Add BPF kfuncs to set and get xattrs with 'security.bpf.' prefix
(Song Liu)
- Reject attaching programs to noreturn functions (Yafang Shao)
- Introduce pre-order traversal of cgroup bpf programs (Yonghong
Song)"
* tag 'bpf-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (186 commits)
selftests/bpf: Add selftests for load-acquire/store-release when register number is invalid
bpf: Fix out-of-bounds read in check_atomic_load/store()
libbpf: Add namespace for errstr making it libbpf_errstr
bpf: Add struct_ops context information to struct bpf_prog_aux
selftests/bpf: Sanitize pointer prior fclose()
selftests/bpf: Migrate test_xdp_vlan.sh into test_progs
selftests/bpf: test_xdp_vlan: Rename BPF sections
bpf: clarify a misleading verifier error message
selftests/bpf: Add selftest for attaching fexit to __noreturn functions
bpf: Reject attaching fexit/fmod_ret to __noreturn functions
bpf: Only fails the busy counter check in bpf_cgrp_storage_get if it creates storage
bpf: Make perf_event_read_output accessible in all program types.
bpftool: Using the right format specifiers
bpftool: Add -Wformat-signedness flag to detect format errors
selftests/bpf: Test freplace from user namespace
libbpf: Pass BPF token from find_prog_btf_id to BPF_BTF_GET_FD_BY_ID
bpf: Return prog btf_id without capable check
bpf: BPF token support for BPF_BTF_GET_FD_BY_ID
bpf, x86: Fix objtool warning for timed may_goto
bpf: Check map->record at the beginning of check_and_free_fields()
...
- Decouple mixed mode startup code from the traditional x86 decompressor
- Revert zero-length file hack in efivarfs
- Prevent EFI zboot from using the CopyMem/SetMem boot services after
ExitBootServices()
- Update EFI zboot to use the ZLIB/ZSTD library interfaces directly
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCZ9vAPwAKCRAwbglWLn0t
XNsFAQCq4zXmbHnFl8gR3rq06f2gR3DKPfUBGVnyfaP/77ag0AD6Alzm4Pg014cL
GsZPQf38uGnygMTGYsU1HdE8EugFFQY=
=UXC0
-----END PGP SIGNATURE-----
Merge tag 'efi-next-for-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
- Decouple mixed mode startup code from the traditional x86
decompressor
- Revert zero-length file hack in efivarfs
- Prevent EFI zboot from using the CopyMem/SetMem boot services after
ExitBootServices()
- Update EFI zboot to use the ZLIB/ZSTD library interfaces directly
* tag 'efi-next-for-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/libstub: Avoid legacy decompressor zlib/zstd wrappers
efi/libstub: Avoid CopyMem/SetMem EFI services after ExitBootServices
efi: efibc: change kmalloc(size * count, ...) to kmalloc_array()
efivarfs: Revert "allow creation of zero length files"
x86/efi/mixed: Move mixed mode startup code into libstub
x86/efi/mixed: Simplify and document thunking logic
x86/efi/mixed: Remove dependency on legacy startup_32 code
x86/efi/mixed: Set up 1:1 mapping of lower 4GiB in the stub
x86/efi/mixed: Factor out and clean up long mode entry
x86/efi/mixed: Check CPU compatibility without relying on verify_cpu()
x86/efistub: Merge PE and handover entrypoints
Find first zero (FFZ) can be implemented by negating the
input and using find first set (FFS).
Before/after code generation comparison on ffz()-using
kernel code shows that code generation has not changed:
# kernel/signal.o:
text data bss dec hex filename
42121 3472 8 45601 b221 signal.o.before
42121 3472 8 45601 b221 signal.o.after
md5:
ce4c31e1bce96af19b62a5f9659842f1 signal.o.before.asm
ce4c31e1bce96af19b62a5f9659842f1 signal.o.after.asm
[ mingo: Added code generation check. ]
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20250327095641.131483-1-ubizjak@gmail.com
After commit c104c16073 ("Kunit to check the longest symbol length"),
there is a warning when building with clang because there is now a
definition of unlikely from compiler.h in tools/include/linux, which
conflicts with the one in the instruction decoder selftest:
arch/x86/tools/insn_decoder_test.c:15:9: warning: 'unlikely' macro redefined [-Wmacro-redefined]
Remove the second unlikely() definition, as it is no longer necessary,
clearing up the warning.
Fixes: c104c16073 ("Kunit to check the longest symbol length")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250318-x86-decoder-test-fix-unlikely-redef-v1-1-74c84a7bf05b@kernel.org
History of the performance regression:
======================================
Since the following series of user copy updates were merged upstream
~2 years ago via:
a562456643 ("Merge branch 'x86-rep-insns': x86 user copy clarifications")
.. copy_user_generic() on x86_64 stopped doing alignment of the
writes to the destination to a 8 byte boundary for the non FSRM case.
Previously, this was done through the ALIGN_DESTINATION macro that
was used in the now removed copy_user_generic_unrolled function.
Turns out this change causes some loss of performance/throughput on
some use cases and specific CPU/platforms without FSRM and ERMS.
Lately I got two reports of performance/throughput issues after a
RHEL 9 kernel pulled the same upstream series with updates to user
copy functions. Both reports consisted of running specific
networking/TCP related testing using iperf3.
Partial upstream fix
====================
The first report was related to a Linux Bridge testing using VMs on a
specific machine with an AMD CPU (EPYC 7402), and after a brief
investigation it turned out that the later change via:
ca96b162bf ("x86: bring back rep movsq for user access on CPUs without ERMS")
... helped/fixed the performance issue.
However, after the later commit/fix was applied, then I got another
regression reported in a multistream TCP test on a 100Gbit mlx5 nic, also
running on an AMD based platform (AMD EPYC 7302 CPU), again that was using
iperf3 to run the test. That regression was after applying the later
fix/commit, but only this didn't help in telling the whole history.
Testing performed to pinpoint residual regression
=================================================
So I narrowed down the second regression use case, but running it
without traffic through a NIC, on localhost, in trying to narrow down
CPU usage and not being limited by other factor like network bandwidth.
I used another system also with an AMD CPU (AMD EPYC 7742). Basically,
I run iperf3 in server and client mode in the same system, for example:
- Start the server binding it to CPU core/thread 19:
$ taskset -c 19 iperf3 -D -s -B 127.0.0.1 -p 12000
- Start the client always binding/running on CPU core/thread 17, using
perf to get statistics:
$ perf stat -o stat.txt taskset -c 17 iperf3 -c 127.0.0.1 -b 0/1000 -V \
-n 50G --repeating-payload -l 16384 -p 12000 --cport 12001 2>&1 \
> stat-19.txt
For the client, always running/pinned to CPU 17. But for the iperf3 in
server mode, I did test runs using CPUs 19, 21, 23 or not pinned to any
specific CPU. So it basically consisted with four runs of the same
commands, just changing the CPU which the server is pinned, or without
pinning by removing the taskset call before the server command. The CPUs
were chosen based on NUMA node they were on, this is the relevant output
of lscpu on the system:
$ lscpu
...
Model name: AMD EPYC 7742 64-Core Processor
...
Caches (sum of all):
L1d: 2 MiB (64 instances)
L1i: 2 MiB (64 instances)
L2: 32 MiB (64 instances)
L3: 256 MiB (16 instances)
NUMA:
NUMA node(s): 4
NUMA node0 CPU(s): 0,1,8,9,16,17,24,25,32,33,40,41,48,49,56,57,64,65,72,73,80,81,88,89,96,97,104,105,112,113,120,121
NUMA node1 CPU(s): 2,3,10,11,18,19,26,27,34,35,42,43,50,51,58,59,66,67,74,75,82,83,90,91,98,99,106,107,114,115,122,123
NUMA node2 CPU(s): 4,5,12,13,20,21,28,29,36,37,44,45,52,53,60,61,68,69,76,77,84,85,92,93,100,101,108,109,116,117,124,125
NUMA node3 CPU(s): 6,7,14,15,22,23,30,31,38,39,46,47,54,55,62,63,70,71,78,79,86,87,94,95,102,103,110,111,118,119,126,127
...
So for the server run, when picking a CPU, I chose CPUs to be not on the same
node. The reason is with that I was able to get/measure relevant
performance differences when changing the alignment of the writes to the
destination in copy_user_generic.
Testing shows up to +81% performance improvement under iperf3
=============================================================
Here's a summary of the iperf3 runs:
# Vanilla upstream alignment:
CPU RATE SYS TIME sender-receiver
Server bind 19: 13.0Gbits/sec 28.371851000 33.233499566 86.9%-70.8%
Server bind 21: 12.9Gbits/sec 28.283381000 33.586486621 85.8%-69.9%
Server bind 23: 11.1Gbits/sec 33.660190000 39.012243176 87.7%-64.5%
Server bind none: 18.9Gbits/sec 19.215339000 22.875117865 86.0%-80.5%
# With the attached patch (aligning writes in non ERMS/FSRM case):
CPU RATE SYS TIME sender-receiver
Server bind 19: 20.8Gbits/sec 14.897284000 20.811101382 75.7%-89.0%
Server bind 21: 20.4Gbits/sec 15.205055000 21.263165909 75.4%-89.7%
Server bind 23: 20.2Gbits/sec 15.433801000 21.456175000 75.5%-89.8%
Server bind none: 26.1Gbits/sec 12.534022000 16.632447315 79.8%-89.6%
So I consistently got better results when aligning the write. The
results above were run on 6.14.0-rc6/rc7 based kernels. The sys is sys
time and then the total time to run/transfer 50G of data. The last
field is the CPU usage of sender/receiver iperf3 process. It's also
worth to note that each pair of iperf3 runs may get slightly different
results on each run, but I always got consistent higher results with
the write alignment for this specific test of running the processes
on CPUs in different NUMA nodes.
Linus Torvalds helped/provided this version of the patch. Initially I
proposed a version which aligned writes for all cases in
rep_movs_alternative, however it used two extra registers and thus
Linus provided an enhanced version that only aligns the write on the
large_movsq case, which is sufficient since the problem happens only
on those AMD CPUs like ones mentioned above without ERMS/FSRM, and
also doesn't require using extra registers. Also, I validated that
aligning only on large_movsq case is really enough for getting the
performance back.
I also tested this patch on an old Intel based non-ERMS/FRMS system
(with Xeon E5-2667 - Sandy Bridge based) and didn't get any problems:
no performance enhancement but also no regression either, using the
same iperf3 based benchmark. Also newer Intel processors after
Sandy Bridge usually have ERMS and should not be affected by this change.
[ mingo: Updated the changelog. ]
Fixes: ca96b162bf ("x86: bring back rep movsq for user access on CPUs without ERMS")
Fixes: 034ff37d34 ("x86: rewrite '__copy_user_nocache' function")
Reported-by: Ondrej Lichtner <olichtne@redhat.com>
Co-developed-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250320142213.2623518-1-herton@redhat.com
When verify_sha256_digest() fails, __apply_microcode_amd() should propagate
the failure by returning false (and not -1 which is promoted to true).
Fixes: 50cef76d5c ("x86/microcode/AMD: Load only SHA256-checksummed patches")
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250327230503.1850368-2-boris.ostrovsky@oracle.com
- Removal of support for IBM Cell Blades
- SMP support for microwatt platform
- Support for inline static calls on PPC32
- Enable pmu selftests for power11 platform
- Enable hardware trace macro (HTM) hcall support
- Support for limited address mode capability
- Changes to RMA size from 512 MB to 768 MB to handle fadump
- Misc fixes and cleanups
Thanks to: Abhishek Dubey, Amit Machhiwal, Andreas Schwab, Arnd Bergmann,
Athira Rajeev, Avnish Chouhan, Christophe Leroy, Disha Goel, Donet Tom, Gaurav
Batra, Gautam Menghani, Hari Bathini, Kajol Jain, Kees Cook, Mahesh Salgaonkar,
Michael Ellerman, Paul Mackerras, Ritesh Harjani (IBM), Sathvika Vasireddy,
Segher Boessenkool, Sourabh Jain, Vaibhav Jain, Venkat Rao Bagalkote.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEqX2DNAOgU8sBX3pRpnEsdPSHZJQFAmfjZnYACgkQpnEsdPSH
ZJTmKg/+NGW7wyFY9d8Iai9ncYY7GSzsMSDTaan7qg0QWOd5gjHbsdbava7TM/DW
8p9XsC+17kSeftRNUjtc52bSN8Ei2gBdsXIagQG1alfB2X2e6wkNauifK+dz3Su6
usMEZZTO5R/jFDotFXNM1nsUj+8dvjnPgOUrji/P8k7PT5295wpza0hz1fy5SrOA
hM5cliBP36UgFe5Efvgm4OUX2gQIhbc3stt9MVfymW/k0Mit5f41UIPuVGiTWowY
s0cUJGkhxUlGXT3VfOVKuZfn4u9KMha7UCl9afSceJzXOdnUIKIbskui1VEv6cD/
iSIxi839uErAobFHlsLYprgYFciYLII3xe2qNZCA/ZxeIMS/Mm6xokESeWLhBnfa
P7ke6l0z3GDtTvgI2eSeU9BdrVveF1NgbP9GYSKgT6gtw/kRRnxgHF8tzmLON5PT
KXpQlzz8VuSBRtF2jnLFU89+FFwSA1bRUhDrp89HyYFqw1B5g4N7kFFTUJWHOuKS
fwPGy+cveKehmCUBedeTRFqHvvqdwpD/WnPlQzCly3WxqdL8U/eTXYftMiAwuK28
ovLuSs3vRThKRQ8DnUa5oB0UGsjMpRV5LdvYkhw+x8mZKUR59oj4fx2ae4TtPakg
dbAYuPPkCORdaSga/nV6vQgsLprFpcGX3dq6E19+BVBAY5D+1PE=
=GFcj
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Madhavan Srinivasan:
- Remove support for IBM Cell Blades
- SMP support for microwatt platform
- Support for inline static calls on PPC32
- Enable pmu selftests for power11 platform
- Enable hardware trace macro (HTM) hcall support
- Support for limited address mode capability
- Changes to RMA size from 512 MB to 768 MB to handle fadump
- Misc fixes and cleanups
Thanks to Abhishek Dubey, Amit Machhiwal, Andreas Schwab, Arnd Bergmann,
Athira Rajeev, Avnish Chouhan, Christophe Leroy, Disha Goel, Donet Tom,
Gaurav Batra, Gautam Menghani, Hari Bathini, Kajol Jain, Kees Cook,
Mahesh Salgaonkar, Michael Ellerman, Paul Mackerras, Ritesh Harjani
(IBM), Sathvika Vasireddy, Segher Boessenkool, Sourabh Jain, Vaibhav
Jain, and Venkat Rao Bagalkote.
* tag 'powerpc-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (61 commits)
powerpc/kexec: fix physical address calculation in clear_utlb_entry()
crypto: powerpc: Mark ghashp8-ppc.o as an OBJECT_FILES_NON_STANDARD
powerpc: Fix 'intra_function_call not a direct call' warning
powerpc/perf: Fix ref-counting on the PMU 'vpa_pmu'
KVM: PPC: Enable CAP_SPAPR_TCE_VFIO on pSeries KVM guests
powerpc/prom_init: Fixup missing #size-cells on PowerBook6,7
powerpc/microwatt: Add SMP support
powerpc: Define config option for processors with broadcast TLBIE
powerpc/microwatt: Define an idle power-save function
powerpc/microwatt: Device-tree updates
powerpc/microwatt: Select COMMON_CLK in order to get the clock framework
net: toshiba: Remove reference to PPC_IBM_CELL_BLADE
net: spider_net: Remove powerpc Cell driver
cpufreq: ppc_cbe: Remove powerpc Cell driver
genirq: Remove IRQ_EDGE_EOI_HANDLER
docs: Remove reference to removed CBE_CPUFREQ_SPU_GOVERNOR
powerpc: Remove UDBG_RTAS_CONSOLE
powerpc/io: Use standard barrier macros in io.c
powerpc/io: Rename _insw_ns() etc.
powerpc/io: Use generic raw accessors
...
kunit tool:
- Changes to kunit tool to use qboot on QEMU x86_64, and build GDB scripts.
- Fixes kunit tool bug in parsing test plan.
- Adds test to kunit tool to check parsing late test plan.
kunit:
- Clarifies kunit_skip() argument name.
- Adds Kunit check for the longest symbol length.
- Changes qemu_configs for sparc to use Zilog console.
-----BEGIN PGP SIGNATURE-----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=h8xS
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-kunit-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit updates from Shuah Khan:
"kunit tool:
- Changes to kunit tool to use qboot on QEMU x86_64, and build GDB
scripts
- Fixes kunit tool bug in parsing test plan
- Adds test to kunit tool to check parsing late test plan
kunit:
- Clarifies kunit_skip() argument name
- Adds Kunit check for the longest symbol length
- Changes qemu_configs for sparc to use Zilog console"
* tag 'linux_kselftest-kunit-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: tool: add test to check parsing late test plan
kunit: tool: Fix bug in parsing test plan
Kunit to check the longest symbol length
kunit: Clarify kunit_skip() argument name
kunit: tool: Build GDB scripts
kunit: qemu_configs: sparc: use Zilog console
kunit: tool: Use qboot on QEMU x86_64
* Move vm_table members out of kernel/sysctl.c
All vm_table array members have moved to their respective subsystems leading
to the removal of vm_table from kernel/sysctl.c. This increases modularity by
placing the ctl_tables closer to where they are actually used and at the same
time reducing the chances of merge conflicts in kernel/sysctl.c.
* ctl_table range fixes
Replace the proc_handler function that checks variable ranges in
coredump_sysctls and vdso_table with the one that actually uses the extra{1,2}
pointers as min/max values. This tightens the range of the values that users
can pass into the kernel effectively preventing {under,over}flows.
* Misc fixes
Correct grammar errors and typos in test messages. Update sysctl files in
MAINTAINERS. Constified and removed array size in declaration for
alignment_tbl
* Testing
- These have all been in linux-next for at least 1 month
- They have gone through 0-day
- Ran all these through sysctl selftests in x86_64
-----BEGIN PGP SIGNATURE-----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=0bcX
-----END PGP SIGNATURE-----
Merge tag 'sysctl-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl
Pull sysctl updates from Joel Granados:
- Move vm_table members out of kernel/sysctl.c
All vm_table array members have moved to their respective subsystems
leading to the removal of vm_table from kernel/sysctl.c. This
increases modularity by placing the ctl_tables closer to where they
are actually used and at the same time reducing the chances of merge
conflicts in kernel/sysctl.c.
- ctl_table range fixes
Replace the proc_handler function that checks variable ranges in
coredump_sysctls and vdso_table with the one that actually uses the
extra{1,2} pointers as min/max values. This tightens the range of the
values that users can pass into the kernel effectively preventing
{under,over}flows.
- Misc fixes
Correct grammar errors and typos in test messages. Update sysctl
files in MAINTAINERS. Constified and removed array size in
declaration for alignment_tbl
* tag 'sysctl-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl: (22 commits)
selftests/sysctl: fix wording of help messages
selftests: fix spelling/grammar errors in sysctl/sysctl.sh
MAINTAINERS: Update sysctl file list in MAINTAINERS
sysctl: Fix underflow value setting risk in vm_table
coredump: Fixes core_pipe_limit sysctl proc_handler
sysctl: remove unneeded include
sysctl: remove the vm_table
sh: vdso: move the sysctl to arch/sh/kernel/vsyscall/vsyscall.c
x86: vdso: move the sysctl to arch/x86/entry/vdso/vdso32-setup.c
fs: dcache: move the sysctl to fs/dcache.c
sunrpc: simplify rpcauth_cache_shrink_count()
fs: drop_caches: move sysctl to fs/drop_caches.c
fs: fs-writeback: move sysctl to fs/fs-writeback.c
mm: nommu: move sysctl to mm/nommu.c
security: min_addr: move sysctl to security/min_addr.c
mm: mmap: move sysctl to mm/mmap.c
mm: util: move sysctls to mm/util.c
mm: vmscan: move vmscan sysctls to mm/vmscan.c
mm: swap: move sysctl to mm/swap.c
mm: filemap: move sysctl to mm/filemap.c
...
Direct HLT instruction execution causes #VEs for TDX VMs which is routed
to hypervisor via TDCALL. safe_halt() routines execute HLT in STI-shadow
so IRQs need to remain disabled until the TDCALL to ensure that pending
IRQs are correctly treated as wake events.
Emit warning and fail emulation if IRQs are enabled during HLT #VE handling
to avoid running into scenarios where IRQ wake events are lost resulting in
indefinite HLT execution times.
Signed-off-by: Vishal Annapurve <vannapurve@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Tested-by: Ryan Afranji <afranji@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20250228014416.3925664-4-vannapurve@google.com
Direct HLT instruction execution causes #VEs for TDX VMs which is routed
to hypervisor via TDCALL. If HLT is executed in STI-shadow, resulting #VE
handler will enable interrupts before TDCALL is routed to hypervisor
leading to missed wakeup events, as current TDX spec doesn't expose
interruptibility state information to allow #VE handler to selectively
enable interrupts.
Commit bfe6ed0c67 ("x86/tdx: Add HLT support for TDX guests")
prevented the idle routines from executing HLT instruction in STI-shadow.
But it missed the paravirt routine which can be reached via this path
as an example:
kvm_wait() =>
safe_halt() =>
raw_safe_halt() =>
arch_safe_halt() =>
irq.safe_halt() =>
pv_native_safe_halt()
To reliably handle arch_safe_halt() for TDX VMs, introduce explicit
dependency on CONFIG_PARAVIRT and override paravirt halt()/safe_halt()
routines with TDX-safe versions that execute direct TDCALL and needed
interrupt flag updates. Executing direct TDCALL brings in additional
benefit of avoiding HLT related #VEs altogether.
As tested by Ryan Afranji:
"Tested with the specjbb2015 benchmark. It has heavy lock contention which leads
to many halt calls. TDX VMs suffered a poor score before this patchset.
Verified the major performance improvement with this patchset applied."
Fixes: bfe6ed0c67 ("x86/tdx: Add HLT support for TDX guests")
Signed-off-by: Vishal Annapurve <vannapurve@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Tested-by: Ryan Afranji <afranji@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250228014416.3925664-3-vannapurve@google.com
CONFIG_PARAVIRT_XXL is mainly defined/used by XEN PV guests. For
other VM guest types, features supported under CONFIG_PARAVIRT
are self sufficient. CONFIG_PARAVIRT mainly provides support for
TLB flush operations and time related operations.
For TDX guest as well, paravirt calls under CONFIG_PARVIRT meets
most of its requirement except the need of HLT and SAFE_HLT
paravirt calls, which is currently defined under
CONFIG_PARAVIRT_XXL.
Since enabling CONFIG_PARAVIRT_XXL is too bloated for TDX guest
like platforms, move HLT and SAFE_HLT paravirt calls under
CONFIG_PARAVIRT.
Moving HLT and SAFE_HLT paravirt calls are not fatal and should not
break any functionality for current users of CONFIG_PARAVIRT.
Fixes: bfe6ed0c67 ("x86/tdx: Add HLT support for TDX guests")
Co-developed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Vishal Annapurve <vannapurve@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Tested-by: Ryan Afranji <afranji@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20250228014416.3925664-2-vannapurve@google.com
Another set of improvements to the kernel's CRC (cyclic redundancy
check) code:
- Rework the CRC64 library functions to be directly optimized, like what
I did last cycle for the CRC32 and CRC-T10DIF library functions.
- Rewrite the x86 PCLMULQDQ-optimized CRC code, and add VPCLMULQDQ
support and acceleration for crc64_be and crc64_nvme.
- Rewrite the riscv Zbc-optimized CRC code, and add acceleration for
crc_t10dif, crc64_be, and crc64_nvme.
- Remove crc_t10dif and crc64_rocksoft from the crypto API, since they
are no longer needed there.
- Rename crc64_rocksoft to crc64_nvme, as the old name was incorrect.
- Add kunit test cases for crc64_nvme and crc7.
- Eliminate redundant functions for calculating the Castagnoli CRC32,
settling on just crc32c().
- Remove unnecessary prompts from some of the CRC kconfig options.
- Further optimize the x86 crc32c code.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCZ+CGGhQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOK3wRAP4tbnzawUmlIHIF0hleoADXehUgAhMt
NZn15mGvyiuwIQEA8W9qvnLdFXZkdxhxAEvDDFjyrRauL6eGtr/GvCx4AQY=
=wmKG
-----END PGP SIGNATURE-----
Merge tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull CRC updates from Eric Biggers:
"Another set of improvements to the kernel's CRC (cyclic redundancy
check) code:
- Rework the CRC64 library functions to be directly optimized, like
what I did last cycle for the CRC32 and CRC-T10DIF library
functions
- Rewrite the x86 PCLMULQDQ-optimized CRC code, and add VPCLMULQDQ
support and acceleration for crc64_be and crc64_nvme
- Rewrite the riscv Zbc-optimized CRC code, and add acceleration for
crc_t10dif, crc64_be, and crc64_nvme
- Remove crc_t10dif and crc64_rocksoft from the crypto API, since
they are no longer needed there
- Rename crc64_rocksoft to crc64_nvme, as the old name was incorrect
- Add kunit test cases for crc64_nvme and crc7
- Eliminate redundant functions for calculating the Castagnoli CRC32,
settling on just crc32c()
- Remove unnecessary prompts from some of the CRC kconfig options
- Further optimize the x86 crc32c code"
* tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (36 commits)
x86/crc: drop the avx10_256 functions and rename avx10_512 to avx512
lib/crc: remove unnecessary prompt for CONFIG_CRC64
lib/crc: remove unnecessary prompt for CONFIG_LIBCRC32C
lib/crc: remove unnecessary prompt for CONFIG_CRC8
lib/crc: remove unnecessary prompt for CONFIG_CRC7
lib/crc: remove unnecessary prompt for CONFIG_CRC4
lib/crc7: unexport crc7_be_syndrome_table
lib/crc_kunit.c: update comment in crc_benchmark()
lib/crc_kunit.c: add test and benchmark for crc7_be()
x86/crc32: optimize tail handling for crc32c short inputs
riscv/crc64: add Zbc optimized CRC64 functions
riscv/crc-t10dif: add Zbc optimized CRC-T10DIF function
riscv/crc32: reimplement the CRC32 functions using new template
riscv/crc: add "template" for Zbc optimized CRC functions
x86/crc: add ANNOTATE_NOENDBR to suppress objtool warnings
x86/crc32: improve crc32c_arch() code generation with clang
x86/crc64: implement crc64_be and crc64_nvme using new template
x86/crc-t10dif: implement crc_t10dif using new template
x86/crc32: implement crc32_le using new template
x86/crc: add "template" for [V]PCLMULQDQ based CRC functions
...
-----BEGIN PGP SIGNATURE-----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=oxfV
-----END PGP SIGNATURE-----
Merge tag 'lsm-pr-20250323' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm updates from Paul Moore:
- Various minor updates to the LSM Rust bindings
Changes include marking trivial Rust bindings as inlines and comment
tweaks to better reflect the LSM hooks.
- Add LSM/SELinux access controls to io_uring_allowed()
Similar to the io_uring_disabled sysctl, add a LSM hook to
io_uring_allowed() to enable LSMs a simple way to enforce security
policy on the use of io_uring. This pull request includes SELinux
support for this new control using the io_uring/allowed permission.
- Remove an unused parameter from the security_perf_event_open() hook
The perf_event_attr struct parameter was not used by any currently
supported LSMs, remove it from the hook.
- Add an explicit MAINTAINERS entry for the credentials code
We've seen problems in the past where patches to the credentials code
sent by non-maintainers would often languish on the lists for
multiple months as there was no one explicitly tasked with the
responsibility of reviewing and/or merging credentials related code.
Considering that most of the code under security/ has a vested
interest in ensuring that the credentials code is well maintained,
I'm volunteering to look after the credentials code and Serge Hallyn
has also volunteered to step up as an official reviewer. I posted the
MAINTAINERS update as a RFC to LKML in hopes that someone else would
jump up with an "I'll do it!", but beyond Serge it was all crickets.
- Update Stephen Smalley's old email address to prevent confusion
This includes a corresponding update to the mailmap file.
* tag 'lsm-pr-20250323' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
mailmap: map Stephen Smalley's old email addresses
lsm: remove old email address for Stephen Smalley
MAINTAINERS: add Serge Hallyn as a credentials reviewer
MAINTAINERS: add an explicit credentials entry
cred,rust: mark Credential methods inline
lsm,rust: reword "destroy" -> "release" in SecurityCtx
lsm,rust: mark SecurityCtx methods inline
perf: Remove unnecessary parameter of security check
lsm: fix a missing security_uring_allowed() prototype
io_uring,lsm,selinux: add LSM hooks for io_uring_setup()
io_uring: refactor io_uring_allowed()
- Manage sysfs attributes and boost frequencies efficiently from
cpufreq core to reduce boilerplate code in drivers (Viresh Kumar).
- Minor cleanups to cpufreq drivers (Aaron Kling, Benjamin Schneider,
Dhananjay Ugwekar, Imran Shaik, zuoqian).
- Migrate some cpufreq drivers to using for_each_present_cpu() (Jacky
Bai).
- cpufreq-qcom-hw DT binding fixes (Krzysztof Kozlowski).
- Use str_enable_disable() helper in cpufreq_online() (Lifeng Zheng).
- Optimize the amd-pstate driver to avoid cases where call paths end
up calling the same writes multiple times and needlessly caching
variables through code reorganization, locking overhaul and tracing
adjustments (Mario Limonciello, Dhananjay Ugwekar).
- Make it possible to avoid enabling capacity-aware scheduling (CAS) in
the intel_pstate driver and relocate a check for out-of-band (OOB)
platform handling in it to make it detect OOB before checking HWP
availability (Rafael Wysocki).
- Fix dbs_update() to avoid inadvertent conversions of negative integer
values to unsigned int which causes CPU frequency selection to be
inaccurate in some cases when the "conservative" cpufreq governor is
in use (Jie Zhan).
- Update the handling of the most recent idle intervals in the menu
cpuidle governor to prevent useful information from being discarded
by it in some cases and improve the prediction accuracy (Rafael
Wysocki).
- Make it possible to tell the intel_idle driver to ignore its built-in
table of idle states for the given processor, clean up the handling
of auto-demotion disabling on Baytrail and Cherrytrail chips in it,
and update its MAINTAINERS entry (David Arcari, Artem Bityutskiy,
Rafael Wysocki).
- Make some cpuidle drivers use for_each_present_cpu() instead of
for_each_possible_cpu() during initialization to avoid issues
occurring when nosmp or maxcpus=0 are used (Jacky Bai).
- Clean up the Energy Model handling code somewhat (Rafael Wysocki).
- Use kfree_rcu() to simplify the handling of runtime Energy Model
updates (Li RongQing).
- Add an entry for the Energy Model framework to MAINTAINERS as
properly maintained (Lukasz Luba).
- Address RCU-related sparse warnings in the Energy Model code (Rafael
Wysocki).
- Remove ENERGY_MODEL dependency on SMP and allow it to be selected
when DEVFREQ is set without CPUFREQ so it can be used on a wider
range of systems (Jeson Gao).
- Unify error handling during runtime suspend and runtime resume in the
core to help drivers to implement more consistent runtime PM error
handling (Rafael Wysocki).
- Drop a redundant check from pm_runtime_force_resume() and rearrange
documentation related to __pm_runtime_disable() (Rafael Wysocki).
- Rework the handling of the "smart suspend" driver flag in the PM core
to avoid issues hat may occur when drivers using it depend on some
other drivers and clean up the related PM core code (Rafael Wysocki,
Colin Ian King).
- Fix the handling of devices with the power.direct_complete flag set
if device_suspend() returns an error for at least one device to avoid
situations in which some of them may not be resumed (Rafael Wysocki).
- Use mutex_trylock() in hibernate_compressor_param_set() to avoid a
possible deadlock that may occur if the "compressor" hibernation
module parameter is accessed during the registration of a new
ieee80211 device (Lizhi Xu).
- Suppress sleeping parent warning in device_pm_add() in the case when
new children are added under a device with the power.direct_complete
set after it has been processed by device_resume() (Xu Yang).
- Remove needless return in three void functions related to system
wakeup (Zijun Hu).
- Replace deprecated kmap_atomic() with kmap_local_page() in the
hibernation core code (David Reaver).
- Remove unused helper functions related to system sleep (David Alan
Gilbert).
- Clean up s2idle_enter() so it does not lock and unlock CPU offline
in vain and update comments in it (Ulf Hansson).
- Clean up broken white space in dpm_wait_for_children() (Geert
Uytterhoeven).
- Update the cpupower utility to fix lib version-ing in it and memory
leaks in error legs, remove hard-coded values, and implement CPU
physical core querying (Thomas Renninger, John B. Wyatt IV, Shuah
Khan, Yiwei Lin, Zhongqiu Han).
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmfhhTYSHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO16/gIAKuRiG1fFgUcUSXC1iFu42vrB/1i4wpA
02GICACqM3K6/5jd3ct/WOU28GUgDs+xcmqH7CnMaM6y9nXEWjWarmSfFekAO+0q
TPtQ7xTy0hBCB3he1P2uLKBJBin4Wn47U9/rvs4J7mQd5zDxTINKIiVoHg2lEE+s
HAeSoNRb2sp5IZDm9+/LfhHNYRP1mJ97cbZlymqctGB3xgDL7qMLid/1+gFPHAQS
4/LXj3IgyU8DpA/j5nhtpaAqjN5g2QxIUfQgADRIcESK99Y/7aAMs1/G0WhJKaay
9yx+4/xmkGvVCZQx1DphksFLISEzltY0SFWLsoppPzBTGVEW2GQQsNI=
=LqVy
-----END PGP SIGNATURE-----
Merge tag 'pm-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These are dominated by cpufreq updates which in turn are dominated by
updates related to boost support in the core and drivers and
amd-pstate driver optimizations.
Apart from the above, there are some cpuidle updates including a
rework of the most recent idle intervals handling in the venerable
menu governor that leads to significant improvements in some
performance benchmarks, as the governor is now more likely to predict
a shorter idle duration in some cases, and there are updates of the
core device power management code, mostly related to system suspend
and resume, that should help to avoid potential issues arising when
the drivers of devices depending on one another want to use different
optimizations.
There is also a usual collection of assorted fixes and cleanups,
including removal of some unused code.
Specifics:
- Manage sysfs attributes and boost frequencies efficiently from
cpufreq core to reduce boilerplate code in drivers (Viresh Kumar)
- Minor cleanups to cpufreq drivers (Aaron Kling, Benjamin Schneider,
Dhananjay Ugwekar, Imran Shaik, zuoqian)
- Migrate some cpufreq drivers to using for_each_present_cpu() (Jacky
Bai)
- cpufreq-qcom-hw DT binding fixes (Krzysztof Kozlowski)
- Use str_enable_disable() helper in cpufreq_online() (Lifeng Zheng)
- Optimize the amd-pstate driver to avoid cases where call paths end
up calling the same writes multiple times and needlessly caching
variables through code reorganization, locking overhaul and tracing
adjustments (Mario Limonciello, Dhananjay Ugwekar)
- Make it possible to avoid enabling capacity-aware scheduling (CAS)
in the intel_pstate driver and relocate a check for out-of-band
(OOB) platform handling in it to make it detect OOB before checking
HWP availability (Rafael Wysocki)
- Fix dbs_update() to avoid inadvertent conversions of negative
integer values to unsigned int which causes CPU frequency selection
to be inaccurate in some cases when the "conservative" cpufreq
governor is in use (Jie Zhan)
- Update the handling of the most recent idle intervals in the menu
cpuidle governor to prevent useful information from being discarded
by it in some cases and improve the prediction accuracy (Rafael
Wysocki)
- Make it possible to tell the intel_idle driver to ignore its
built-in table of idle states for the given processor, clean up the
handling of auto-demotion disabling on Baytrail and Cherrytrail
chips in it, and update its MAINTAINERS entry (David Arcari, Artem
Bityutskiy, Rafael Wysocki)
- Make some cpuidle drivers use for_each_present_cpu() instead of
for_each_possible_cpu() during initialization to avoid issues
occurring when nosmp or maxcpus=0 are used (Jacky Bai)
- Clean up the Energy Model handling code somewhat (Rafael Wysocki)
- Use kfree_rcu() to simplify the handling of runtime Energy Model
updates (Li RongQing)
- Add an entry for the Energy Model framework to MAINTAINERS as
properly maintained (Lukasz Luba)
- Address RCU-related sparse warnings in the Energy Model code
(Rafael Wysocki)
- Remove ENERGY_MODEL dependency on SMP and allow it to be selected
when DEVFREQ is set without CPUFREQ so it can be used on a wider
range of systems (Jeson Gao)
- Unify error handling during runtime suspend and runtime resume in
the core to help drivers to implement more consistent runtime PM
error handling (Rafael Wysocki)
- Drop a redundant check from pm_runtime_force_resume() and rearrange
documentation related to __pm_runtime_disable() (Rafael Wysocki)
- Rework the handling of the "smart suspend" driver flag in the PM
core to avoid issues hat may occur when drivers using it depend on
some other drivers and clean up the related PM core code (Rafael
Wysocki, Colin Ian King)
- Fix the handling of devices with the power.direct_complete flag set
if device_suspend() returns an error for at least one device to
avoid situations in which some of them may not be resumed (Rafael
Wysocki)
- Use mutex_trylock() in hibernate_compressor_param_set() to avoid a
possible deadlock that may occur if the "compressor" hibernation
module parameter is accessed during the registration of a new
ieee80211 device (Lizhi Xu)
- Suppress sleeping parent warning in device_pm_add() in the case
when new children are added under a device with the
power.direct_complete set after it has been processed by
device_resume() (Xu Yang)
- Remove needless return in three void functions related to system
wakeup (Zijun Hu)
- Replace deprecated kmap_atomic() with kmap_local_page() in the
hibernation core code (David Reaver)
- Remove unused helper functions related to system sleep (David Alan
Gilbert)
- Clean up s2idle_enter() so it does not lock and unlock CPU offline
in vain and update comments in it (Ulf Hansson)
- Clean up broken white space in dpm_wait_for_children() (Geert
Uytterhoeven)
- Update the cpupower utility to fix lib version-ing in it and memory
leaks in error legs, remove hard-coded values, and implement CPU
physical core querying (Thomas Renninger, John B. Wyatt IV, Shuah
Khan, Yiwei Lin, Zhongqiu Han)"
* tag 'pm-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (139 commits)
PM: sleep: Fix bit masking operation
dt-bindings: cpufreq: cpufreq-qcom-hw: Narrow properties on SDX75, SA8775p and SM8650
dt-bindings: cpufreq: cpufreq-qcom-hw: Drop redundant minItems:1
dt-bindings: cpufreq: cpufreq-qcom-hw: Add missing constraint for interrupt-names
dt-bindings: cpufreq: cpufreq-qcom-hw: Add QCS8300 compatible
cpufreq: Init cpufreq only for present CPUs
PM: sleep: Fix handling devices with direct_complete set on errors
cpuidle: Init cpuidle only for present CPUs
PM: clk: Remove unused pm_clk_remove()
PM: sleep: core: Fix indentation in dpm_wait_for_children()
PM: s2idle: Extend comment in s2idle_enter()
PM: s2idle: Drop redundant locks when entering s2idle
PM: sleep: Remove unused pm_generic_ wrappers
cpufreq: tegra186: Share policy per cluster
cpupower: Make lib versioning scheme more obvious and fix version link
PM: EM: Rework the depends on for CONFIG_ENERGY_MODEL
PM: EM: Address RCU-related sparse warnings
cpupower: Implement CPU physical core querying
pm: cpupower: remove hard-coded topology depth values
pm: cpupower: Fix cmd_monitor() error legs to free cpu_topology
...
- Use the str_on_off() helper function instead of hard-coded strings in
the ACPI power resources handling code (Thorsten Blum).
- Add fan speed reporting for ACPI fans that have _FST, but otherwise
do not support the entire ACPI 4 fan interface (Joshua Grisham).
- Fix a stale comment regarding trip points in acpi_thermal_add() that
diverged from the commented code after removing _CRT evaluation from
acpi_thermal_get_trip_points() (xueqin Luo).
- Make ACPI button driver also subscribe to system events (Mario
Limonciello).
- Use the str_yes_no() helper function instead of hard-coded strings in
the ACPI backlight (video) driver (Thorsten Blum).
- Add a missing header file include to the x86 arch CPPC code (Mario
Limonciello).
- Rework the sysfs attributes implementation in the ACPI platform-profile
driver and improve the unregistration code in it (Nathan Chancellor,
Kurt Borja).
- Prevent the ACPI HED driver from being built as a module and change
its initcall level to subsys_initcall to avoid initialization ordering
issues related to it (Xiaofei Tan).
- Update a maintainer email address in the ACPI PMIC entry in
MAINTAINERS (Mika Westerberg).
- Address a GCC 15's -Wunterminated-string-initialization warning in
the core PNP subsystem code and remove some dead code from it (Kees
Cook, David Alan Gilbert).
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmfhhZYSHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1yCMH/3IbFftpA2sJg504igRgLdMzDAhTc/Y3
x8Y37v1e1Psxyp0SQni84H4E11QWaytSXngemnp39+LgN+14KW243z6v+PBGioyI
+cdJw7kAk8v1aX+Ujel2Z3BIz9QPFqZd6d3R0AsZkZcI/28VW7kHNRXZ6p2kYmxK
7acx0Y1cM1k0UotzpzQ4RDaTnFNKUGJFQwdKTEJU237gsFrVh8ev2hLm9Hy4FU6R
zGtjrU2/oBEmoCVgrXG4n6bZYP4dZwCZ8ewckIvepGuTPTHP8tYMxrELw/3A1901
+lnN6zK6nMpvCd9cl0ongT5iFG4gsuBGanvnP7Mf51YI380jmNSLeCI=
=/b+r
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"From the functional perspective, the most significant changes here are
the ACPI fan driver update allowing it to handle fans with
fine-grained state checking supported, but without fine-grained
control, and the ACPI button driver update making it subscribe to
system event notifications (in addition to device notifications) which
on some systems is requisite for waking up the system from sleep.
The rest is fixes and cleanups including removal of some dead code.
Specifics:
- Use the str_on_off() helper function instead of hard-coded strings
in the ACPI power resources handling code (Thorsten Blum)
- Add fan speed reporting for ACPI fans that have _FST, but otherwise
do not support the entire ACPI 4 fan interface (Joshua Grisham)
- Fix a stale comment regarding trip points in acpi_thermal_add()
that diverged from the commented code after removing _CRT
evaluation from acpi_thermal_get_trip_points() (xueqin Luo)
- Make ACPI button driver also subscribe to system events (Mario
Limonciello)
- Use the str_yes_no() helper function instead of hard-coded strings
in the ACPI backlight (video) driver (Thorsten Blum)
- Add a missing header file include to the x86 arch CPPC code (Mario
Limonciello)
- Rework the sysfs attributes implementation in the ACPI
platform-profile driver and improve the unregistration code in it
(Nathan Chancellor, Kurt Borja)
- Prevent the ACPI HED driver from being built as a module and change
its initcall level to subsys_initcall to avoid initialization
ordering issues related to it (Xiaofei Tan)
- Update a maintainer email address in the ACPI PMIC entry in
MAINTAINERS (Mika Westerberg)
- Address a GCC 15's -Wunterminated-string-initialization warning in
the core PNP subsystem code and remove some dead code from it (Kees
Cook, David Alan Gilbert)"
* tag 'acpi-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PNP: Expand length of fixup id string
PNP: Remove prehistoric deadcode
ACPI: button: Install notifier for system events as well
ACPI: fan: Add fan speed reporting for fans with only _FST
ACPI: HED: Always initialize before evged
x86/ACPI: CPPC: Add missing include
ACPI: video: Use str_yes_no() helper in acpi_video_bus_add()
ACPI: platform_profile: Improve platform_profile_unregister()
ACPI: platform-profile: Fix CFI violation when accessing sysfs files
ACPI: power: Use str_on_off() helper function
ACPI: thermal: Fix stale comment regarding trip points
MAINTAINERS: Use my kernel.org address for ACPI PMIC work
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmfhlLATHHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXgchCADOz33rSm4G4w4r0qT05dTDi/lZkEdK
64dQq322XXP/C9FfR66d30243gsAmuM5a0SvzFHLXAOu6yqM270Xehd/Rud+Um2s
lSVnc0Ux0AWBgksqFd0t577aN7zmJEukosEYO5lBNop+zOcadrm3S6Th/AoL2h/D
yphPkhH13bsCK+Wll/eBOQLIhC9iA0konYbBLuEQ5MqvUbrzc6Rmb5gxsHHZKOqg
vLjkrYR/d3s2gIpKxiFp0RwvzGyffZEHxvU/YF3hTenPMlTlnXWbyspBSTVmWggP
13IFLzqxDdW9RgUnGB4xRc424AC1LKqEr42QPQE7zGvl2jdJriA2Q1LT
=BXqj
-----END PGP SIGNATURE-----
Merge tag 'hyperv-next-signed-20250324' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
- Add support for running as the root partition in Hyper-V (Microsoft
Hypervisor) by exposing /dev/mshv (Nuno and various people)
- Add support for CPU offlining in Hyper-V (Hamza Mahfooz)
- Misc fixes and cleanups (Roman Kisel, Tianyu Lan, Wei Liu, Michael
Kelley, Thorsten Blum)
* tag 'hyperv-next-signed-20250324' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (24 commits)
x86/hyperv: fix an indentation issue in mshyperv.h
x86/hyperv: Add comments about hv_vpset and var size hypercall input args
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs
hyperv: Add definitions for root partition driver to hv headers
x86: hyperv: Add mshv_handler() irq handler and setup function
Drivers: hv: Introduce per-cpu event ring tail
Drivers: hv: Export some functions for use by root partition module
acpi: numa: Export node_to_pxm()
hyperv: Introduce hv_recommend_using_aeoi()
arm64/hyperv: Add some missing functions to arm64
x86/mshyperv: Add support for extended Hyper-V features
hyperv: Log hypercall status codes as strings
x86/hyperv: Fix check of return value from snp_set_vmsa()
x86/hyperv: Add VTL mode callback for restarting the system
x86/hyperv: Add VTL mode emergency restart callback
hyperv: Remove unused union and structs
hyperv: Add CONFIG_MSHV_ROOT to gate root partition support
hyperv: Change hv_root_partition into a function
hyperv: Convert hypercall statuses to linux error codes
drivers/hv: add CPU offlining support
...
Current minimum required version of binutils is 2.25,
which supports TZCNT instruction mnemonic.
Replace "REP; BSF" in variable__{ffs,ffz}() function
with this proper mnemonic.
No functional change intended.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20250325175215.330659-1-ubizjak@gmail.com
If track_pfn_copy() fails, we already added the dst VMA to the maple
tree. As fork() fails, we'll cleanup the maple tree, and stumble over
the dst VMA for which we neither performed any reservation nor copied
any page tables.
Consequently untrack_pfn() will see VM_PAT and try obtaining the
PAT information from the page table -- which fails because the page
table was not copied.
The easiest fix would be to simply clear the VM_PAT flag of the dst VMA
if track_pfn_copy() fails. However, the whole thing is about "simply"
clearing the VM_PAT flag is shaky as well: if we passed track_pfn_copy()
and performed a reservation, but copying the page tables fails, we'll
simply clear the VM_PAT flag, not properly undoing the reservation ...
which is also wrong.
So let's fix it properly: set the VM_PAT flag only if the reservation
succeeded (leaving it clear initially), and undo the reservation if
anything goes wrong while copying the page tables: clearing the VM_PAT
flag after undoing the reservation.
Note that any copied page table entries will get zapped when the VMA will
get removed later, after copy_page_range() succeeded; as VM_PAT is not set
then, we won't try cleaning VM_PAT up once more and untrack_pfn() will be
happy. Note that leaving these page tables in place without a reservation
is not a problem, as we are aborting fork(); this process will never run.
A reproducer can trigger this usually at the first try:
https://gitlab.com/davidhildenbrand/scratchspace/-/raw/main/reproducers/pat_fork.c
WARNING: CPU: 26 PID: 11650 at arch/x86/mm/pat/memtype.c:983 get_pat_info+0xf6/0x110
Modules linked in: ...
CPU: 26 UID: 0 PID: 11650 Comm: repro3 Not tainted 6.12.0-rc5+ #92
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014
RIP: 0010:get_pat_info+0xf6/0x110
...
Call Trace:
<TASK>
...
untrack_pfn+0x52/0x110
unmap_single_vma+0xa6/0xe0
unmap_vmas+0x105/0x1f0
exit_mmap+0xf6/0x460
__mmput+0x4b/0x120
copy_process+0x1bf6/0x2aa0
kernel_clone+0xab/0x440
__do_sys_clone+0x66/0x90
do_syscall_64+0x95/0x180
Likely this case was missed in:
d155df53f3 ("x86/mm/pat: clear VM_PAT if copy_p4d_range failed")
... and instead of undoing the reservation we simply cleared the VM_PAT flag.
Keep the documentation of these functions in include/linux/pgtable.h,
one place is more than sufficient -- we should clean that up for the other
functions like track_pfn_remap/untrack_pfn separately.
Fixes: d155df53f3 ("x86/mm/pat: clear VM_PAT if copy_p4d_range failed")
Fixes: 2ab640379a ("x86: PAT: hooks in generic vm code to help archs to track pfnmap regions - v3")
Reported-by: xingwei lee <xrivendell7@gmail.com>
Reported-by: yuxin wang <wang1315768607@163.com>
Reported-by: Marius Fleischer <fleischermarius@gmail.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/20250321112323.153741-1-david@redhat.com
Closes: https://lore.kernel.org/lkml/CABOYnLx_dnqzpCW99G81DmOr+2UzdmZMk=T3uxwNxwz+R1RAwg@mail.gmail.com/
Closes: https://lore.kernel.org/lkml/CAJg=8jwijTP5fre8woS4JVJQ8iUA6v+iNcsOgtj9Zfpc3obDOQ@mail.gmail.com/
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCZ9/gEwAKCRCAXGG7T9hj
vlxhAQCRzSCNI8wwvENnuc2OnRyWKy8gq7C5WAOIOJdJ3U+scQEAwKGhPJLwE4IS
/JDh5PRJgZ4rdMYatuDfldEcSAfRRgw=
=dF6Z
-----END PGP SIGNATURE-----
Merge tag 'for-linus-6.15-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- cleanup: remove an used function
- add support for a XenServer specific virtual PCI device
- fix the handling of a sparse Xen hypervisor symbol table
- avoid warnings when building the kernel with gcc 15
- fix use of devices behind a VMD bridge when running as a Xen PV dom0
* tag 'for-linus-6.15-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
PCI/MSI: Convert pci_msi_ignore_mask to per MSI domain flag
PCI: vmd: Disable MSI remapping bypass under Xen
xen/pci: Do not register devices with segments >= 0x10000
xen/pciback: Remove unused pcistub_get_pci_dev
xenfs/xensyms: respect hypervisor's "next" indication
xen/mcelog: Add __nonstring annotations for unterminated strings
xen: Add support for XenServer 6.1 platform device
* Nested virtualization support for VGICv3, giving the nested
hypervisor control of the VGIC hardware when running an L2 VM
* Removal of 'late' nested virtualization feature register masking,
making the supported feature set directly visible to userspace
* Support for emulating FEAT_PMUv3 on Apple silicon, taking advantage
of an IMPLEMENTATION DEFINED trap that covers all PMUv3 registers
* Paravirtual interface for discovering the set of CPU implementations
where a VM may run, addressing a longstanding issue of guest CPU
errata awareness in big-little systems and cross-implementation VM
migration
* Userspace control of the registers responsible for identifying a
particular CPU implementation (MIDR_EL1, REVIDR_EL1, AIDR_EL1),
allowing VMs to be migrated cross-implementation
* pKVM updates, including support for tracking stage-2 page table
allocations in the protected hypervisor in the 'SecPageTable' stat
* Fixes to vPMU, ensuring that userspace updates to the vPMU after
KVM_RUN are reflected into the backing perf events
LoongArch:
* Remove unnecessary header include path
* Assume constant PGD during VM context switch
* Add perf events support for guest VM
RISC-V:
* Disable the kernel perf counter during configure
* KVM selftests improvements for PMU
* Fix warning at the time of KVM module removal
x86:
* Add support for aging of SPTEs without holding mmu_lock. Not taking mmu_lock
allows multiple aging actions to run in parallel, and more importantly avoids
stalling vCPUs. This includes an implementation of per-rmap-entry locking;
aging the gfn is done with only a per-rmap single-bin spinlock taken, whereas
locking an rmap for write requires taking both the per-rmap spinlock and
the mmu_lock.
Note that this decreases slightly the accuracy of accessed-page information,
because changes to the SPTE outside aging might not use atomic operations
even if they could race against a clear of the Accessed bit. This is
deliberate because KVM and mm/ tolerate false positives/negatives for
accessed information, and testing has shown that reducing the latency of
aging is far more beneficial to overall system performance than providing
"perfect" young/old information.
* Defer runtime CPUID updates until KVM emulates a CPUID instruction, to
coalesce updates when multiple pieces of vCPU state are changing, e.g. as
part of a nested transition.
* Fix a variety of nested emulation bugs, and add VMX support for synthesizing
nested VM-Exit on interception (instead of injecting #UD into L2).
* Drop "support" for async page faults for protected guests that do not set
SEND_ALWAYS (i.e. that only want async page faults at CPL3)
* Bring a bit of sanity to x86's VM teardown code, which has accumulated
a lot of cruft over the years. Particularly, destroy vCPUs before
the MMU, despite the latter being a VM-wide operation.
* Add common secure TSC infrastructure for use within SNP and in the
future TDX
* Block KVM_CAP_SYNC_REGS if guest state is protected. It does not make
sense to use the capability if the relevant registers are not
available for reading or writing.
* Don't take kvm->lock when iterating over vCPUs in the suspend notifier to
fix a largely theoretical deadlock.
* Use the vCPU's actual Xen PV clock information when starting the Xen timer,
as the cached state in arch.hv_clock can be stale/bogus.
* Fix a bug where KVM could bleed PVCLOCK_GUEST_STOPPED across different
PV clocks; restrict PVCLOCK_GUEST_STOPPED to kvmclock, as KVM's suspend
notifier only accounts for kvmclock, and there's no evidence that the
flag is actually supported by Xen guests.
* Clean up the per-vCPU "cache" of its reference pvclock, and instead only
track the vCPU's TSC scaling (multipler+shift) metadata (which is moderately
expensive to compute, and rarely changes for modern setups).
* Don't write to the Xen hypercall page on MSR writes that are initiated by
the host (userspace or KVM) to fix a class of bugs where KVM can write to
guest memory at unexpected times, e.g. during vCPU creation if userspace has
set the Xen hypercall MSR index to collide with an MSR that KVM emulates.
* Restrict the Xen hypercall MSR index to the unofficial synthetic range to
reduce the set of possible collisions with MSRs that are emulated by KVM
(collisions can still happen as KVM emulates Hyper-V MSRs, which also reside
in the synthetic range).
* Clean up and optimize KVM's handling of Xen MSR writes and xen_hvm_config.
* Update Xen TSC leaves during CPUID emulation instead of modifying the CPUID
entries when updating PV clocks; there is no guarantee PV clocks will be
updated between TSC frequency changes and CPUID emulation, and guest reads
of the TSC leaves should be rare, i.e. are not a hot path.
x86 (Intel):
* Fix a bug where KVM unnecessarily reads XFD_ERR from hardware and thus
modifies the vCPU's XFD_ERR on a #NM due to CR0.TS=1.
* Pass XFD_ERR as the payload when injecting #NM, as a preparatory step
for upcoming FRED virtualization support.
* Decouple the EPT entry RWX protection bit macros from the EPT Violation
bits, both as a general cleanup and in anticipation of adding support for
emulating Mode-Based Execution Control (MBEC).
* Reject KVM_RUN if userspace manages to gain control and stuff invalid guest
state while KVM is in the middle of emulating nested VM-Enter.
* Add a macro to handle KVM's sanity checks on entry/exit VMCS control pairs
in anticipation of adding sanity checks for secondary exit controls (the
primary field is out of bits).
x86 (AMD):
* Ensure the PSP driver is initialized when both the PSP and KVM modules are
built-in (the initcall framework doesn't handle dependencies).
* Use long-term pins when registering encrypted memory regions, so that the
pages are migrated out of MIGRATE_CMA/ZONE_MOVABLE and don't lead to
excessive fragmentation.
* Add macros and helpers for setting GHCB return/error codes.
* Add support for Idle HLT interception, which elides interception if the vCPU
has a pending, unmasked virtual IRQ when HLT is executed.
* Fix a bug in INVPCID emulation where KVM fails to check for a non-canonical
address.
* Don't attempt VMRUN for SEV-ES+ guests if the vCPU's VMSA is invalid, e.g.
because the vCPU was "destroyed" via SNP's AP Creation hypercall.
* Reject SNP AP Creation if the requested SEV features for the vCPU don't
match the VM's configured set of features.
Selftests:
* Fix again the Intel PMU counters test; add a data load and do CLFLUSH{OPT} on the data
instead of executing code. The theory is that modern Intel CPUs have
learned new code prefetching tricks that bypass the PMU counters.
* Fix a flaw in the Intel PMU counters test where it asserts that an event is
counting correctly without actually knowing what the event counts on the
underlying hardware.
* Fix a variety of flaws, bugs, and false failures/passes dirty_log_test, and
improve its coverage by collecting all dirty entries on each iteration.
* Fix a few minor bugs related to handling of stats FDs.
* Add infrastructure to make vCPU and VM stats FDs available to tests by
default (open the FDs during VM/vCPU creation).
* Relax an assertion on the number of HLT exits in the xAPIC IPI test when
running on a CPU that supports AMD's Idle HLT (which elides interception of
HLT if a virtual IRQ is pending and unmasked).
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmfcTkEUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMnQAf/cPx72hJOdNy4Qrm8M33YLXVRVV00
yEZ8eN8TWdOclr0ltE/w/ELGh/qS4CU8pjURAk0A6lPioU+mdcTn3dPEqMDMVYom
uOQ2lusEHw0UuSnGZSEjvZJsE/Ro2NSAsHIB6PWRqig1ZBPJzyu0frce34pMpeQH
diwriJL9lKPAhBWXnUQ9BKoi1R0P5OLW9ahX4SOWk7cAFg4DLlDE66Nqf6nKqViw
DwEucTiUEg5+a3d93gihdD4JNl+fb3vI2erxrMxjFjkacl0qgqRu3ei3DG0MfdHU
wNcFSG5B1n0OECKxr80lr1Ip1KTVNNij0Ks+w6Gc6lSg9c4PptnNkfLK3A==
=nnCN
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- Nested virtualization support for VGICv3, giving the nested
hypervisor control of the VGIC hardware when running an L2 VM
- Removal of 'late' nested virtualization feature register masking,
making the supported feature set directly visible to userspace
- Support for emulating FEAT_PMUv3 on Apple silicon, taking advantage
of an IMPLEMENTATION DEFINED trap that covers all PMUv3 registers
- Paravirtual interface for discovering the set of CPU
implementations where a VM may run, addressing a longstanding issue
of guest CPU errata awareness in big-little systems and
cross-implementation VM migration
- Userspace control of the registers responsible for identifying a
particular CPU implementation (MIDR_EL1, REVIDR_EL1, AIDR_EL1),
allowing VMs to be migrated cross-implementation
- pKVM updates, including support for tracking stage-2 page table
allocations in the protected hypervisor in the 'SecPageTable' stat
- Fixes to vPMU, ensuring that userspace updates to the vPMU after
KVM_RUN are reflected into the backing perf events
LoongArch:
- Remove unnecessary header include path
- Assume constant PGD during VM context switch
- Add perf events support for guest VM
RISC-V:
- Disable the kernel perf counter during configure
- KVM selftests improvements for PMU
- Fix warning at the time of KVM module removal
x86:
- Add support for aging of SPTEs without holding mmu_lock.
Not taking mmu_lock allows multiple aging actions to run in
parallel, and more importantly avoids stalling vCPUs. This includes
an implementation of per-rmap-entry locking; aging the gfn is done
with only a per-rmap single-bin spinlock taken, whereas locking an
rmap for write requires taking both the per-rmap spinlock and the
mmu_lock.
Note that this decreases slightly the accuracy of accessed-page
information, because changes to the SPTE outside aging might not
use atomic operations even if they could race against a clear of
the Accessed bit.
This is deliberate because KVM and mm/ tolerate false
positives/negatives for accessed information, and testing has shown
that reducing the latency of aging is far more beneficial to
overall system performance than providing "perfect" young/old
information.
- Defer runtime CPUID updates until KVM emulates a CPUID instruction,
to coalesce updates when multiple pieces of vCPU state are
changing, e.g. as part of a nested transition
- Fix a variety of nested emulation bugs, and add VMX support for
synthesizing nested VM-Exit on interception (instead of injecting
#UD into L2)
- Drop "support" for async page faults for protected guests that do
not set SEND_ALWAYS (i.e. that only want async page faults at CPL3)
- Bring a bit of sanity to x86's VM teardown code, which has
accumulated a lot of cruft over the years. Particularly, destroy
vCPUs before the MMU, despite the latter being a VM-wide operation
- Add common secure TSC infrastructure for use within SNP and in the
future TDX
- Block KVM_CAP_SYNC_REGS if guest state is protected. It does not
make sense to use the capability if the relevant registers are not
available for reading or writing
- Don't take kvm->lock when iterating over vCPUs in the suspend
notifier to fix a largely theoretical deadlock
- Use the vCPU's actual Xen PV clock information when starting the
Xen timer, as the cached state in arch.hv_clock can be stale/bogus
- Fix a bug where KVM could bleed PVCLOCK_GUEST_STOPPED across
different PV clocks; restrict PVCLOCK_GUEST_STOPPED to kvmclock, as
KVM's suspend notifier only accounts for kvmclock, and there's no
evidence that the flag is actually supported by Xen guests
- Clean up the per-vCPU "cache" of its reference pvclock, and instead
only track the vCPU's TSC scaling (multipler+shift) metadata (which
is moderately expensive to compute, and rarely changes for modern
setups)
- Don't write to the Xen hypercall page on MSR writes that are
initiated by the host (userspace or KVM) to fix a class of bugs
where KVM can write to guest memory at unexpected times, e.g.
during vCPU creation if userspace has set the Xen hypercall MSR
index to collide with an MSR that KVM emulates
- Restrict the Xen hypercall MSR index to the unofficial synthetic
range to reduce the set of possible collisions with MSRs that are
emulated by KVM (collisions can still happen as KVM emulates
Hyper-V MSRs, which also reside in the synthetic range)
- Clean up and optimize KVM's handling of Xen MSR writes and
xen_hvm_config
- Update Xen TSC leaves during CPUID emulation instead of modifying
the CPUID entries when updating PV clocks; there is no guarantee PV
clocks will be updated between TSC frequency changes and CPUID
emulation, and guest reads of the TSC leaves should be rare, i.e.
are not a hot path
x86 (Intel):
- Fix a bug where KVM unnecessarily reads XFD_ERR from hardware and
thus modifies the vCPU's XFD_ERR on a #NM due to CR0.TS=1
- Pass XFD_ERR as the payload when injecting #NM, as a preparatory
step for upcoming FRED virtualization support
- Decouple the EPT entry RWX protection bit macros from the EPT
Violation bits, both as a general cleanup and in anticipation of
adding support for emulating Mode-Based Execution Control (MBEC)
- Reject KVM_RUN if userspace manages to gain control and stuff
invalid guest state while KVM is in the middle of emulating nested
VM-Enter
- Add a macro to handle KVM's sanity checks on entry/exit VMCS
control pairs in anticipation of adding sanity checks for secondary
exit controls (the primary field is out of bits)
x86 (AMD):
- Ensure the PSP driver is initialized when both the PSP and KVM
modules are built-in (the initcall framework doesn't handle
dependencies)
- Use long-term pins when registering encrypted memory regions, so
that the pages are migrated out of MIGRATE_CMA/ZONE_MOVABLE and
don't lead to excessive fragmentation
- Add macros and helpers for setting GHCB return/error codes
- Add support for Idle HLT interception, which elides interception if
the vCPU has a pending, unmasked virtual IRQ when HLT is executed
- Fix a bug in INVPCID emulation where KVM fails to check for a
non-canonical address
- Don't attempt VMRUN for SEV-ES+ guests if the vCPU's VMSA is
invalid, e.g. because the vCPU was "destroyed" via SNP's AP
Creation hypercall
- Reject SNP AP Creation if the requested SEV features for the vCPU
don't match the VM's configured set of features
Selftests:
- Fix again the Intel PMU counters test; add a data load and do
CLFLUSH{OPT} on the data instead of executing code. The theory is
that modern Intel CPUs have learned new code prefetching tricks
that bypass the PMU counters
- Fix a flaw in the Intel PMU counters test where it asserts that an
event is counting correctly without actually knowing what the event
counts on the underlying hardware
- Fix a variety of flaws, bugs, and false failures/passes
dirty_log_test, and improve its coverage by collecting all dirty
entries on each iteration
- Fix a few minor bugs related to handling of stats FDs
- Add infrastructure to make vCPU and VM stats FDs available to tests
by default (open the FDs during VM/vCPU creation)
- Relax an assertion on the number of HLT exits in the xAPIC IPI test
when running on a CPU that supports AMD's Idle HLT (which elides
interception of HLT if a virtual IRQ is pending and unmasked)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (216 commits)
RISC-V: KVM: Optimize comments in kvm_riscv_vcpu_isa_disable_allowed
RISC-V: KVM: Teardown riscv specific bits after kvm_exit
LoongArch: KVM: Register perf callbacks for guest
LoongArch: KVM: Implement arch-specific functions for guest perf
LoongArch: KVM: Add stub for kvm_arch_vcpu_preempted_in_kernel()
LoongArch: KVM: Remove PGD saving during VM context switch
LoongArch: KVM: Remove unnecessary header include path
KVM: arm64: Tear down vGIC on failed vCPU creation
KVM: arm64: PMU: Reload when resetting
KVM: arm64: PMU: Reload when user modifies registers
KVM: arm64: PMU: Fix SET_ONE_REG for vPMC regs
KVM: arm64: PMU: Assume PMU presence in pmu-emul.c
KVM: arm64: PMU: Set raw values from user to PM{C,I}NTEN{SET,CLR}, PMOVS{SET,CLR}
KVM: arm64: Create each pKVM hyp vcpu after its corresponding host vcpu
KVM: arm64: Factor out pKVM hyp vcpu creation to separate function
KVM: arm64: Initialize HCRX_EL2 traps in pKVM
KVM: arm64: Factor out setting HCRX_EL2 traps into separate function
KVM: x86: block KVM_CAP_SYNC_REGS if guest state is protected
KVM: x86: Add infrastructure for secure TSC
KVM: x86: Push down setting vcpu.arch.user_set_tsc
...
filesystem part so that ARM's MPAM varian of resource control can be added
later while sharing the user interface with x86 (James Morse)
-----BEGIN PGP SIGNATURE-----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=FRzf
-----END PGP SIGNATURE-----
Merge tag 'x86_cache_for_v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 resource control updates from Borislav Petkov:
- First part of the MPAM work: split the architectural part of resctrl
from the filesystem part so that ARM's MPAM varian of resource
control can be added later while sharing the user interface with x86
(James Morse)
* tag 'x86_cache_for_v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
x86/resctrl: Move get_{mon,ctrl}_domain_from_cpu() to live with their callers
x86/resctrl: Move get_config_index() to a header
x86/resctrl: Handle throttle_mode for SMBA resources
x86/resctrl: Move RFTYPE flags to be managed by resctrl
x86/resctrl: Make resctrl_arch_pseudo_lock_fn() take a plr
x86/resctrl: Make prefetch_disable_bits belong to the arch code
x86/resctrl: Allow an architecture to disable pseudo lock
x86/resctrl: Add resctrl_arch_ prefix to pseudo lock functions
x86/resctrl: Move mbm_cfg_mask to struct rdt_resource
x86/resctrl: Move mba_mbps_default_event init to filesystem code
x86/resctrl: Change mon_event_config_{read,write}() to be arch helpers
x86/resctrl: Add resctrl_arch_is_evt_configurable() to abstract BMEC
x86/resctrl: Move the is_mbm_*_enabled() helpers to asm/resctrl.h
x86/resctrl: Rewrite and move the for_each_*_rdt_resource() walkers
x86/resctrl: Move monitor init work to a resctrl init call
x86/resctrl: Move monitor exit work to a resctrl exit call
x86/resctrl: Add an arch helper to reset one resource
x86/resctrl: Move resctrl types to a separate header
x86/resctrl: Move rdt_find_domain() to be visible to arch and fs code
x86/resctrl: Expose resctrl fs's init function to the rest of the kernel
...
attack vectors instead of single vulnerabilities
- Untangle and remove a now unneeded X86_FEATURE_USE_IBPB flag
- Add support for a Zen5-specific SRSO mitigation
- Cleanups and minor improvements
-----BEGIN PGP SIGNATURE-----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=btX/
-----END PGP SIGNATURE-----
Merge tag 'x86_bugs_for_v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 speculation mitigation updates from Borislav Petkov:
- Some preparatory work to convert the mitigations machinery to
mitigating attack vectors instead of single vulnerabilities
- Untangle and remove a now unneeded X86_FEATURE_USE_IBPB flag
- Add support for a Zen5-specific SRSO mitigation
- Cleanups and minor improvements
* tag 'x86_bugs_for_v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bugs: Make spectre user default depend on MITIGATION_SPECTRE_V2
x86/bugs: Use the cpu_smt_possible() helper instead of open-coded code
x86/bugs: Add AUTO mitigations for mds/taa/mmio/rfds
x86/bugs: Relocate mds/taa/mmio/rfds defines
x86/bugs: Add X86_BUG_SPECTRE_V2_USER
x86/bugs: Remove X86_FEATURE_USE_IBPB
KVM: nVMX: Always use IBPB to properly virtualize IBRS
x86/bugs: Use a static branch to guard IBPB on vCPU switch
x86/bugs: Remove the X86_FEATURE_USE_IBPB check in ib_prctl_set()
x86/mm: Remove X86_FEATURE_USE_IBPB checks in cond_mitigation()
x86/bugs: Move the X86_FEATURE_USE_IBPB check into callers
x86/bugs: KVM: Add support for SRSO_MSR_FIX
Perf and PMUs:
- Support for the "Rainier" CPU PMU from Arm
- Preparatory driver changes and cleanups that pave the way for BRBE
support
- Support for partial virtualisation of the Apple-M1 PMU
- Support for the second event filter in Arm CSPMU designs
- Minor fixes and cleanups (CMN and DWC PMUs)
- Enable EL2 requirements for FEAT_PMUv3p9
Power, CPU topology:
- Support for AMUv1-based average CPU frequency
- Run-time SMT control wired up for arm64 (CONFIG_HOTPLUG_SMT). It adds
a generic topology_is_primary_thread() function overridden by x86 and
powerpc
New(ish) features:
- MOPS (memcpy/memset) support for the uaccess routines
Security/confidential compute:
- Fix the DMA address for devices used in Realms with Arm CCA. The
CCA architecture uses the address bit to differentiate between shared
and private addresses
- Spectre-BHB: assume CPUs Linux doesn't know about vulnerable by
default
Memory management clean-ups:
- Drop the P*D_TABLE_BIT definition in preparation for 128-bit PTEs
- Some minor page table accessor clean-ups
- PIE/POE (permission indirection/overlay) helpers clean-up
Kselftests:
- MTE: skip hugetlb tests if MTE is not supported on such mappings and
user correct naming for sync/async tag checking modes
Miscellaneous:
- Add a PKEY_UNRESTRICTED definition as 0 to uapi (toolchain people
request)
- Sysreg updates for new register fields
- CPU type info for some Qualcomm Kryo cores
-----BEGIN PGP SIGNATURE-----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=Kc9c
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"Nothing major this time around.
Apart from the usual perf/PMU updates, some page table cleanups, the
notable features are average CPU frequency based on the AMUv1
counters, CONFIG_HOTPLUG_SMT and MOPS instructions (memcpy/memset) in
the uaccess routines.
Perf and PMUs:
- Support for the 'Rainier' CPU PMU from Arm
- Preparatory driver changes and cleanups that pave the way for BRBE
support
- Support for partial virtualisation of the Apple-M1 PMU
- Support for the second event filter in Arm CSPMU designs
- Minor fixes and cleanups (CMN and DWC PMUs)
- Enable EL2 requirements for FEAT_PMUv3p9
Power, CPU topology:
- Support for AMUv1-based average CPU frequency
- Run-time SMT control wired up for arm64 (CONFIG_HOTPLUG_SMT). It
adds a generic topology_is_primary_thread() function overridden by
x86 and powerpc
New(ish) features:
- MOPS (memcpy/memset) support for the uaccess routines
Security/confidential compute:
- Fix the DMA address for devices used in Realms with Arm CCA. The
CCA architecture uses the address bit to differentiate between
shared and private addresses
- Spectre-BHB: assume CPUs Linux doesn't know about vulnerable by
default
Memory management clean-ups:
- Drop the P*D_TABLE_BIT definition in preparation for 128-bit PTEs
- Some minor page table accessor clean-ups
- PIE/POE (permission indirection/overlay) helpers clean-up
Kselftests:
- MTE: skip hugetlb tests if MTE is not supported on such mappings
and user correct naming for sync/async tag checking modes
Miscellaneous:
- Add a PKEY_UNRESTRICTED definition as 0 to uapi (toolchain people
request)
- Sysreg updates for new register fields
- CPU type info for some Qualcomm Kryo cores"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (72 commits)
arm64: mm: Don't use %pK through printk
perf/arm_cspmu: Fix missing io.h include
arm64: errata: Add newer ARM cores to the spectre_bhb_loop_affected() lists
arm64: cputype: Add MIDR_CORTEX_A76AE
arm64: errata: Add KRYO 2XX/3XX/4XX silver cores to Spectre BHB safe list
arm64: errata: Assume that unknown CPUs _are_ vulnerable to Spectre BHB
arm64: errata: Add QCOM_KRYO_4XX_GOLD to the spectre_bhb_k24_list
arm64/sysreg: Enforce whole word match for open/close tokens
arm64/sysreg: Fix unbalanced closing block
arm64: Kconfig: Enable HOTPLUG_SMT
arm64: topology: Support SMT control on ACPI based system
arch_topology: Support SMT control for OF based system
cpu/SMT: Provide a default topology_is_primary_thread()
arm64/mm: Define PTDESC_ORDER
perf/arm_cspmu: Add PMEVFILT2R support
perf/arm_cspmu: Generalise event filtering
perf/arm_cspmu: Move register definitons to header
arm64/kernel: Always use level 2 or higher for early mappings
arm64/mm: Drop PXD_TABLE_BIT
arm64/mm: Check pmd_table() in pmd_trans_huge()
...
* for-next/smt-control:
: Support SMT control on arm64
arm64: Kconfig: Enable HOTPLUG_SMT
arm64: topology: Support SMT control on ACPI based system
arch_topology: Support SMT control for OF based system
cpu/SMT: Provide a default topology_is_primary_thread()
- Consolidate the VDSO storage
The VDSO data storage and data layout has been largely architecture
specific for historical reasons. That increases the maintenance effort
and causes inconsistencies over and over.
There is no real technical reason for architecture specific layouts and
implementations. The architecture specific details can easily be
integrated into a generic layout, which also reduces the amount of
duplicated code for managing the mappings.
Convert all architectures over to a unified layout and common mapping
infrastructure. This splits the VDSO data layout into subsystem
specific blocks, timekeeping, random and architecture parts, which
provides a better structure and allows to improve and update the
functionalities without conflict and interaction.
- Rework the timekeeping data storage
The current implementation is designed for exposing system timekeeping
accessors, which was good enough at the time when it was designed.
PTP and Time Sensitive Networking (TSN) change that as there are
requirements to expose independent PTP clocks, which are not related to
system timekeeping.
Replace the monolithic data storage by a structured layout, which
allows to add support for independent PTP clocks on top while reusing
both the data structures and the time accessor implementations.
-----BEGIN PGP SIGNATURE-----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=rwei
-----END PGP SIGNATURE-----
Merge tag 'timers-vdso-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull VDSO infrastructure updates from Thomas Gleixner:
- Consolidate the VDSO storage
The VDSO data storage and data layout has been largely architecture
specific for historical reasons. That increases the maintenance
effort and causes inconsistencies over and over.
There is no real technical reason for architecture specific layouts
and implementations. The architecture specific details can easily be
integrated into a generic layout, which also reduces the amount of
duplicated code for managing the mappings.
Convert all architectures over to a unified layout and common mapping
infrastructure. This splits the VDSO data layout into subsystem
specific blocks, timekeeping, random and architecture parts, which
provides a better structure and allows to improve and update the
functionalities without conflict and interaction.
- Rework the timekeeping data storage
The current implementation is designed for exposing system
timekeeping accessors, which was good enough at the time when it was
designed.
PTP and Time Sensitive Networking (TSN) change that as there are
requirements to expose independent PTP clocks, which are not related
to system timekeeping.
Replace the monolithic data storage by a structured layout, which
allows to add support for independent PTP clocks on top while reusing
both the data structures and the time accessor implementations.
* tag 'timers-vdso-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (55 commits)
sparc/vdso: Always reject undefined references during linking
x86/vdso: Always reject undefined references during linking
vdso: Rework struct vdso_time_data and introduce struct vdso_clock
vdso: Move architecture related data before basetime data
powerpc/vdso: Prepare introduction of struct vdso_clock
arm64/vdso: Prepare introduction of struct vdso_clock
x86/vdso: Prepare introduction of struct vdso_clock
time/namespace: Prepare introduction of struct vdso_clock
vdso/namespace: Rename timens_setup_vdso_data() to reflect new vdso_clock struct
vdso/vsyscall: Prepare introduction of struct vdso_clock
vdso/gettimeofday: Prepare helper functions for introduction of struct vdso_clock
vdso/gettimeofday: Prepare do_coarse_timens() for introduction of struct vdso_clock
vdso/gettimeofday: Prepare do_coarse() for introduction of struct vdso_clock
vdso/gettimeofday: Prepare do_hres_timens() for introduction of struct vdso_clock
vdso/gettimeofday: Prepare do_hres() for introduction of struct vdso_clock
vdso/gettimeofday: Prepare introduction of struct vdso_clock
vdso/helpers: Prepare introduction of struct vdso_clock
vdso/datapage: Define vdso_clock to prepare for multiple PTP clocks
vdso: Make vdso_time_data cacheline aligned
arm64: Make asm/cache.h compatible with vDSO
...
hrtimers are initialized with hrtimer_init() and a subsequent store to
the callback pointer. This turned out to be suboptimal for the upcoming
Rust integration and is obviously a silly implementation to begin with.
This cleanup replaces the hrtimer_init(T); T->function = cb; sequence
with hrtimer_setup(T, cb);
The conversion was done with Coccinelle and a few manual fixups.
Once the conversion has completely landed in mainline, hrtimer_init()
will be removed and the hrtimer::function becomes a private member.
-----BEGIN PGP SIGNATURE-----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=bYAX
-----END PGP SIGNATURE-----
Merge tag 'timers-cleanups-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanups from Thomas Gleixner:
"A treewide hrtimer timer cleanup
hrtimers are initialized with hrtimer_init() and a subsequent store to
the callback pointer. This turned out to be suboptimal for the
upcoming Rust integration and is obviously a silly implementation to
begin with.
This cleanup replaces the hrtimer_init(T); T->function = cb; sequence
with hrtimer_setup(T, cb);
The conversion was done with Coccinelle and a few manual fixups.
Once the conversion has completely landed in mainline, hrtimer_init()
will be removed and the hrtimer::function becomes a private member"
* tag 'timers-cleanups-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (100 commits)
wifi: rt2x00: Switch to use hrtimer_update_function()
io_uring: Use helper function hrtimer_update_function()
serial: xilinx_uartps: Use helper function hrtimer_update_function()
ASoC: fsl: imx-pcm-fiq: Switch to use hrtimer_setup()
RDMA: Switch to use hrtimer_setup()
virtio: mem: Switch to use hrtimer_setup()
drm/vmwgfx: Switch to use hrtimer_setup()
drm/xe/oa: Switch to use hrtimer_setup()
drm/vkms: Switch to use hrtimer_setup()
drm/msm: Switch to use hrtimer_setup()
drm/i915/request: Switch to use hrtimer_setup()
drm/i915/uncore: Switch to use hrtimer_setup()
drm/i915/pmu: Switch to use hrtimer_setup()
drm/i915/perf: Switch to use hrtimer_setup()
drm/i915/gvt: Switch to use hrtimer_setup()
drm/i915/huc: Switch to use hrtimer_setup()
drm/amdgpu: Switch to use hrtimer_setup()
stm class: heartbeat: Switch to use hrtimer_setup()
i2c: Switch to use hrtimer_setup()
iio: Switch to use hrtimer_setup()
...
- Support for hard indices on RISC-V. The hart index identifies a hart
(core) within a specific interrupt domain in RISC-V's Priviledged
Architecture.
- Rework of the RISC-V MSI driver.
This moves the driver over to the generic MSI library and solves the
affinity problem of unmaskable PCI/MSI controllers. Unmaskable PCI/MSI
controllers are prone to lose interrupts when the MSI message is
updated to change the affinity because the message write consists of
three 32-bit subsequent writes, which update address and data. As these
writes are non-atomic versus the device raising an interrupt, the
device can observe a half written update and issue an interrupt on the
wrong vector. This is mitiated by a carefully orchestrated step by step
update and the observation of an eventually pending interrupt on the
CPU which issues the update. The algorithm follows the well established
method of the X86 MSI driver.
- A new driver for the RISC-V Sophgo SG2042 MSI controller
- Overhaul of the Renesas RZQ2L driver.
Simplification of the probe function by using devm_*() mechanisms,
which avoid the endless list of error prone gotos in the failure paths.
- Expand the Renesas RZV2H driver to support RZ/G3E SoCs
- A workaround for Rockchip 3568002 erratum in the GIC-V3 driver to
ensure that the addressing is limited to the lower 32-bit of the
physical address space.
- Add support for the Allwinner AS23 NMI controller
- Expand the IMX irqsteer driver to handle up to 960 input interrupts
- The usual small updates, cleanups and device tree changes.
-----BEGIN PGP SIGNATURE-----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=jPHa
-----END PGP SIGNATURE-----
Merge tag 'irq-drivers-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq driver updates from Thomas Gleixner:
- Support for hard indices on RISC-V. The hart index identifies a hart
(core) within a specific interrupt domain in RISC-V's Priviledged
Architecture.
- Rework of the RISC-V MSI driver
This moves the driver over to the generic MSI library and solves the
affinity problem of unmaskable PCI/MSI controllers. Unmaskable
PCI/MSI controllers are prone to lose interrupts when the MSI message
is updated to change the affinity because the message write consists
of three 32-bit subsequent writes, which update address and data. As
these writes are non-atomic versus the device raising an interrupt,
the device can observe a half written update and issue an interrupt
on the wrong vector. This is mitiated by a carefully orchestrated
step by step update and the observation of an eventually pending
interrupt on the CPU which issues the update. The algorithm follows
the well established method of the X86 MSI driver.
- A new driver for the RISC-V Sophgo SG2042 MSI controller
- Overhaul of the Renesas RZQ2L driver
Simplification of the probe function by using devm_*() mechanisms,
which avoid the endless list of error prone gotos in the failure
paths.
- Expand the Renesas RZV2H driver to support RZ/G3E SoCs
- A workaround for Rockchip 3568002 erratum in the GIC-V3 driver to
ensure that the addressing is limited to the lower 32-bit of the
physical address space.
- Add support for the Allwinner AS23 NMI controller
- Expand the IMX irqsteer driver to handle up to 960 input interrupts
- The usual small updates, cleanups and device tree changes
* tag 'irq-drivers-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits)
irqchip/imx-irqsteer: Support up to 960 input interrupts
irqchip/sunxi-nmi: Support Allwinner A523 NMI controller
dt-bindings: irq: sun7i-nmi: Document the Allwinner A523 NMI controller
irqchip/davinci-cp-intc: Remove public header
irqchip/renesas-rzv2h: Add RZ/G3E support
irqchip/renesas-rzv2h: Update macros ICU_TSSR_TSSEL_{MASK,PREP}
irqchip/renesas-rzv2h: Update TSSR_TIEN macro
irqchip/renesas-rzv2h: Add field_width to struct rzv2h_hw_info
irqchip/renesas-rzv2h: Add max_tssel to struct rzv2h_hw_info
irqchip/renesas-rzv2h: Add struct rzv2h_hw_info with t_offs variable
irqchip/renesas-rzv2h: Use devm_pm_runtime_enable()
irqchip/renesas-rzv2h: Use devm_reset_control_get_exclusive_deasserted()
irqchip/renesas-rzv2h: Simplify rzv2h_icu_init()
irqchip/renesas-rzv2h: Drop irqchip from struct rzv2h_icu_priv
irqchip/renesas-rzv2h: Fix wrong variable usage in rzv2h_tint_set_type()
dt-bindings: interrupt-controller: renesas,rzv2h-icu: Document RZ/G3E SoC
riscv: sophgo: dts: Add msi controller for SG2042
irqchip: Add the Sophgo SG2042 MSI interrupt controller
dt-bindings: interrupt-controller: Add Sophgo SG2042 MSI
arm64: dts: rockchip: rk356x: Move PCIe MSI to use GIC ITS instead of MBI
...
The actual serial output function is a no-op for now.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20250314173226.3062535-3-dwmw2@infradead.org
The x86/cacheinfo code has been heavily refactored and fleshed out at
parent commits, where any necessary coding style fixes were also done
in place.
Apply Documentation/process/maintainer-tip.rst coding style fixes to the
rest of the code, and align its assignment expressions for readability.
Standardize on CPUID(n) when mentioning leaf queries.
Avoid breaking long lines when doing so helps readability.
At cacheinfo_amd_init_llc_id(), rename variable 'msb' to 'index_msb' as
this is how it's called at the rest of cacheinfo.c code.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250324133324.23458-30-darwi@linutronix.de
Multiple code paths at cacheinfo.c and amd_nb.c check for AMD/Hygon CPUs
L3 cache presensce by directly checking leaf 0x80000006 EDX output.
Extract that logic into its own function. While at it, rework the
AMD/Hygon LLC topology ID caclculation comments for clarity.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250324133324.23458-29-darwi@linutronix.de
The cache_type_map[] array is used to map Intel leaf 0x4 cache_type
values to their corresponding types at <linux/cacheinfo.h>.
Move that array's definition after the actual CPUID leaf 0x4 structures,
instead of having it in the middle of AMD leaf 0x4 emulation code.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250324133324.23458-28-darwi@linutronix.de
The logic of not doing a cache flush if the CPU declares cache self
snooping support is repeated across the x86/cacheinfo code. Extract it
into its own function.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250324133324.23458-27-darwi@linutronix.de
For Intel CPUID leaf 0x4 parsing, refactor the cache level topology ID
calculation code into its own method instead of repeating the same logic
twice for L2 and L3.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250324133324.23458-26-darwi@linutronix.de
init_intel_cacheinfo() was overly complex. It parsed leaf 0x4 data,
leaf 0x2 data, and performed post-processing, all within one function.
Parent commit moved leaf 0x2 parsing and the post-processing logic into
their own functions.
Continue the refactoring by extracting leaf 0x4 parsing into its own
function. Initialize local L2/L3 topology ID variables to BAD_APICID by
default, thus ensuring they can be used unconditionally.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250324133324.23458-25-darwi@linutronix.de
The logic of init_intel_cacheinfo() is quite convoluted: it mixes leaf
0x4 parsing, leaf 0x2 parsing, plus some post-processing, in a single
place.
Begin simplifying its logic by extracting the leaf 0x2 parsing code, and
the post-processing logic, into their own functions. While at it,
rework the SMT LLC topology ID comment for clarity.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250324133324.23458-24-darwi@linutronix.de
CPUID leaf 0x2 output is a stream of one-byte descriptors, each implying
certain details about the CPU's cache and TLB entries.
At previous commits, the mapping tables for such descriptors were merged
into one consolidated table. The mapping was also transformed into a
hash lookup instead of a loop-based lookup for each descriptor.
Use the new consolidated table and its hash-based lookup through the
for_each_leaf_0x2_tlb_entry() accessor.
Remove the TLB-specific mapping, intel_tlb_table[], as it is now no
longer used. Remove the <cpuid/types.h> macro, for_each_leaf_0x2_desc(),
since the converted code was its last user.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250324133324.23458-23-darwi@linutronix.de
CPUID leaf 0x2 output is a stream of one-byte descriptors, each implying
certain details about the CPU's cache and TLB entries.
At previous commits, the mapping tables for such descriptors were merged
into one consolidated table. The mapping was also transformed into a
hash lookup instead of a loop-based lookup for each descriptor.
Use the new consolidated table and its hash-based lookup through the
for_each_leaf_0x2_tlb_entry() accessor. Remove the old cache-specific
mapping, cache_table[], as it is no longer used.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250324133324.23458-22-darwi@linutronix.de
CPUID leaf 0x2 describes TLBs and caches. So there are two tables with the
respective descriptor constants in intel.c and cacheinfo.c. The tables
occupy almost 600 byte and require a loop based lookup for each variant.
Combining them into one table occupies exactly 1k rodata and allows to get
rid of the loop based lookup by just using the descriptor byte provided by
CPUID leaf 0x2 as index into the table, which simplifies the code and
reduces text size.
The conversion of the intel.c and cacheinfo.c code is done separately.
[ darwi: Actually define struct leaf_0x2_table.
Tab-align all of cpuid_0x2_table[] mapping entries.
Define needed SZ_* macros at <linux/sizes.h> instead (merged commit.)
Use CACHE_L1_{INST,DATA} as names for L1 cache descriptor types.
Set descriptor 0x63 type as TLB_DATA_1G_2M_4M and explain why.
Use enums for cache and TLB descriptor types (parent commits.)
Start enum types at 1 since type 0 is reserved for unknown descriptors.
Ensure that cache and TLB enum type values do not intersect.
Add leaf 0x2 table accessor for_each_leaf_0x2_entry() + documentation. ]
Co-developed-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250324133324.23458-21-darwi@linutronix.de
The leaf 0x2 one-byte TLB descriptor types:
TLB_INST_4K
TLB_INST_4M
TLB_INST_2M_4M
...
are just discriminators to be used within the intel_tlb_table[] mapping.
Their specific values are irrelevant.
Use enums for such types.
Make the enum packed and static assert that its values remain within a
single byte so that the intel_tlb_table[] size do not go out of hand.
Use a __CHECKER__ guard for the static_assert(sizeof(enum) == 1) line as
sparse ignores the __packed annotation on enums.
This is similar to:
fe3944fb24 ("fs: Move enum rw_hint into a new header file")
for the core SCSI code.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/Z9rsTirs9lLfEPD9@lx-t490
Link: https://lore.kernel.org/r/20250324133324.23458-20-darwi@linutronix.de
The leaf 0x2 one-byte cache descriptor types:
CACHE_L1_INST
CACHE_L1_DATA
CACHE_L2
CACHE_L3
are just discriminators to be used within the cache_table[] mapping.
Their specific values are irrelevant.
Use enums for such types.
Make the enum packed and static assert that its values remain within a
single byte so that the cache_table[] array size do not go out of hand.
Use a __CHECKER__ guard for the static_assert(sizeof(enum) == 1) line as
sparse ignores the __packed annotation on enums.
This is similar to:
fe3944fb24 ("fs: Move enum rw_hint into a new header file")
for the core SCSI code.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/Z9rsTirs9lLfEPD9@lx-t490
Link: https://lore.kernel.org/r/20250324133324.23458-19-darwi@linutronix.de
CPUID leaf 0x2 output is a stream of one-byte descriptors, each implying
certain details about the CPU's cache and TLB entries.
Two separate tables exist for interpreting these descriptors: one for
TLBs at intel.c and one for caches at cacheinfo.c. These mapping tables
will be merged in further commits, among other improvements to their
model.
In preparation for this, use more descriptive type names for the leaf
0x2 descriptors associated with cpu caches. Namely:
LVL_1_INST => CACHE_L1_INST
LVL_1_DATA => CACHE_L1_DATA
LVL_2 => CACHE_L2
LVL_3 => CACHE_L3
After the TLB and cache descriptors mapping tables are merged, this will
make it clear that such descriptors correspond to cpu caches.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250324133324.23458-18-darwi@linutronix.de
Parent commits decoupled amd_northbridge from _cpuid4_info_regs, moved
AMD L3 northbridge cache_disable_0/1 sysfs code to its own file, and
splitted AMD vs. Intel leaf 0x4 handling into:
amd_fill_cpuid4_info()
intel_fill_cpuid4_info()
fill_cpuid4_info()
After doing all that, the "_cpuid4_info_regs" name becomes a mouthful.
It is also not totally accurate, as the structure holds cpuid4 derived
information like cache node ID and size -- not just regs.
Rename struct _cpuid4_info_regs to _cpuid4_info. That new name also
better matches the AMD/Intel leaf 0x4 functions mentioned above.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250324133324.23458-17-darwi@linutronix.de
The CPUID leaf 0x4 parsing code at cpuid4_cache_lookup_regs() is ugly and
convoluted. It is tangled with multiple nested conditions to handle:
* AMD with TOPEXT, or Hygon CPUs via leaf 0x8000001d
* Legacy AMD fallback via leaf 0x4 emulation
* Intel CPUs via the actual CPUID leaf 0x4
Moreover, AMD L3 northbridge initialization is also awkwardly placed
alongside the CPUID calls of the first two scenarios above. Refactor all
of that as follows:
* Update AMD's leaf 0x4 emulation comment to represent current state
* Clearly label the AMD leaf 0x4 emulation function as a fallback
* Split AMD/Hygon and Intel code paths into separate functions
* Move AMD L3 northbridge initialization out of CPUID leaf 0x4 code,
and into populate_cache_leaves() where it belongs. There,
ci_info_init() can directly store the initialized object in the
private pointer of the <linux/cacheinfo.h> API.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250324133324.23458-16-darwi@linutronix.de
Per Documentation/filesystems/sysfs.rst, a sysfs attribute's show()
method should only use sysfs_emit() or sysfs_emit_at() when returning
values to user space.
Use sysfs_emit() for the AMD L3 cache sysfs attributes cache_disable_0,
cache_disable_1, and subcaches.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250324133324.23458-15-darwi@linutronix.de
Parent commit decoupled amd_northbridge out of _cpuid4_info_regs, where
it was merely "parked" there until ci_info_init() can store it in the
private pointer of the <linux/cacheinfo.h> API.
Given that decoupling, move the AMD-specific L3 cache_disable_0/1 sysfs
code from the generic (and already extremely convoluted) x86/cacheinfo
code into its own file.
Compile the file only if CONFIG_AMD_NB and CONFIG_SYSFS are both
enabled, which mirrors the existing logic.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250324133324.23458-14-darwi@linutronix.de
'struct _cpuid4_info_regs' is meant to hold the CPUID leaf 0x4
output registers (EAX, EBX, and ECX), as well as derived information
such as the cache node ID and size.
It also contains a reference to amd_northbridge, which is there only to
be "parked" until ci_info_init() can store it in the priv pointer of the
<linux/cacheinfo.h> API. That priv pointer is then used by AMD-specific
L3 cache_disable_0/1 sysfs attributes.
Decouple amd_northbridge from _cpuid4_info_regs and pass it explicitly
through the functions at x86/cacheinfo. Doing so clarifies when
amd_northbridge is actually needed (AMD-only code) and when it is
not (Intel-specific code). It also prepares for moving the AMD-specific
L3 cache_disable_0/1 sysfs code into its own file in next commit.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250324133324.23458-13-darwi@linutronix.de
While gathering CPU cache info, CPUID leaf 0x8000001d is invoked in two
separate if blocks: one for Hygon CPUs and one for AMDs with topology
extensions. After each invocation, amd_init_l3_cache() is called.
Merge the two if blocks into a single condition, thus removing the
duplicated code. Future commits will expand these if blocks, so
combining them now is both cleaner and more maintainable.
Note, while at it, remove a useless "better error?" comment that was
within the same function since the 2005 commit e2cac78935 ("[PATCH]
x86_64: When running cpuid4 need to run on the correct CPU").
Note, as previously done at commit aec28d852ed2 ("x86/cpuid: Standardize
on u32 in <asm/cpuid/api.h>"), standardize on using 'u32' and 'u8' types.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250324133324.23458-12-darwi@linutronix.de
The cacheinfo code frequently uses the output registers from CPUID leaf
0x4. Such registers are cached in 'struct _cpuid4_info_regs', augmented
with related information, and are then passed across functions.
The naming of these _cpuid4_info_regs instances is confusing at best.
Some instances are called "this_leaf", which is vague as "this" lacks
context and "leaf" is overly generic given that other CPUID leaves are
also processed within cacheinfo. Other _cpuid4_info_regs instances are
just called "base", adding further ambiguity.
Standardize on id4 for all instances.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250324133324.23458-11-darwi@linutronix.de
The ci_info_init() function initializes 10 members of a 'struct cacheinfo'
instance using passed data from CPUID leaf 0x4.
Such assignment expressions are difficult to read in their current form.
Align them for clarity.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250324133324.23458-10-darwi@linutronix.de
_cpuid4_info_regs instances are passed through a large number of
functions at cacheinfo.c. For clarity, constify the instance parameters
where _cpuid4_info_regs is only read from.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250324133324.23458-9-darwi@linutronix.de
The cacheinfo structure defined at <include/linux/cacheinfo.h> is a
generic cache info object representation.
Calling its instances at x86 cacheinfo.c "leaf" confuses it with a CPUID
leaf -- especially that multiple CPUID calls are already sprinkled across
that file. Most of such instances also have a redundant "this_" prefix.
Rename all of the cacheinfo "this_leaf" instances to just "ci".
[ darwi: Move into separate commit and write commit log ]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250324133324.23458-8-darwi@linutronix.de
amd_cpuid4()'s first parameter, "leaf", is not a CPUID leaf as the name
implies. Rather, it's an index emulating CPUID(4)'s subleaf semantics;
i.e. an ID for the cache object currently enumerated. Rename that
parameter to "index".
Apply minor coding style fixes to the rest of the function as well.
[ darwi: Move into a separate commit and write commit log.
Use "index" instead of "subleaf" for amd_cpuid4() first param,
as that's the name typically used at the whole of cacheinfo.c. ]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250324133324.23458-7-darwi@linutronix.de
Extract the cache descriptor lookup logic out of the leaf 0x2 parsing
code and into a dedicated function. This disentangles such lookup from
the deeply nested leaf 0x2 parsing loop.
Remove the cache table termination entry, as it is no longer needed
after the ARRAY_SIZE()-based lookup.
[ darwi: Move refactoring logic into this separate commit + commit log.
Remove the cache table termination entry. ]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250324133324.23458-6-darwi@linutronix.de
Parent commit introduced CPUID leaf 0x2 parsing helpers at
<asm/cpuid/leaf_0x2_api.h>. The new API allows sharing leaf 0x2's output
validation and iteration logic across both intel.c and cacheinfo.c.
Convert cacheinfo.c to that new API.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250324133324.23458-5-darwi@linutronix.de
Introduce CPUID leaf 0x2 parsing helpers at <asm/cpuid/leaf_0x2_api.h>.
This allows sharing the leaf 0x2's output validation and iteration logic
across both x86/cpu intel.c and cacheinfo.c.
Start by converting intel.c to the new API.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250324133324.23458-4-darwi@linutronix.de
Leaf 0x2 output includes a "query count" byte where it was supposed to
specify the number of repeated CPUID leaf 0x2 subleaf 0 queries needed to
extract all of the CPU's cache and TLB descriptors.
Per current Intel manuals, all CPUs supporting this leaf "will always"
return an iteration count of 1.
Remove the leaf 0x2 query loop and just query the hardware once.
Note, as previously done at commit aec28d852ed2 ("x86/cpuid: Standardize
on u32 in <asm/cpuid/api.h>"), standardize on using 'u32' and 'u8' types.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250324133324.23458-3-darwi@linutronix.de
Leaf 0x2 output includes a "query count" byte where it was supposed to
specify the number of repeated CPUID leaf 0x2 subleaf 0 queries needed to
extract all of the CPU's cache and TLB descriptors.
Per current Intel manuals, all CPUs supporting this leaf "will always"
return an iteration count of 1.
Remove the leaf 0x2 query loop and just query the hardware once.
Note, as previously done in:
aec28d852ed2 ("x86/cpuid: Standardize on u32 in <asm/cpuid/api.h>")
standardize on using 'u32' and 'u8' types.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250324133324.23458-2-darwi@linutronix.de
When split_lock_mitigate is disabled, each CPU needs its own delayed_work
structure. They are used to reenable split lock detection after its
disabling. But delayed_work structure must be correctly initialized after
its allocation.
Current implementation uses deferred initialization that makes the
split lock handler code unclear. The code can be simplified a bit
if the initialization is moved to the appropriate initcall.
sld_setup() is called before setup_per_cpu_areas(), thus it can't be used
for this purpose, so introduce an independent initcall for
the initialization.
[ mingo: Simplified the 'work' assignment line a bit more. ]
Signed-off-by: Maksim Davydov <davydov-max@yandex-team.ru>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250325085807.171885-1-davydov-max@yandex-team.ru
fpu_init_fpstate_user() was removed in:
commit 582b01b6ab ("x86/fpu: Remove old KVM FPU interface").
Update that comment to accurately reflect the current state regarding its
callers.
Signed-off-by: Chao Gao <chao.gao@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250324131931.2097905-1-chao.gao@intel.com
For X86_FEATURE_SMAP alternatives which replace NOP with STAC or CLAC,
uaccess validation skips the NOP branch to avoid following impossible
code paths, e.g. where a STAC would be patched but a CLAC wouldn't.
However, it's not safe to assume an X86_FEATURE_SMAP alternative is
patching STAC/CLAC. There can be other alternatives, like
static_cpu_has(), where both branches need to be validated.
Fix that by repurposing ANNOTATE_IGNORE_ALTERNATIVE for skipping either
original instructions or new ones. This is a more generic approach
which enables the removal of the feature checking hacks and the
insn->ignore bit.
Fixes the following warnings:
arch/x86/mm/fault.o: warning: objtool: do_user_addr_fault+0x8ec: __stack_chk_fail() missing __noreturn in .c/.h or NORETURN() in noreturns.h
arch/x86/mm/fault.o: warning: objtool: do_user_addr_fault+0x8f1: unreachable instruction
[ mingo: Fix up conflicts with recent x86 changes. ]
Fixes: ea24213d80 ("objtool: Add UACCESS validation")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/de0621ca242130156a55d5d74fed86994dfa4c9c.1742852846.git.jpoimboe@kernel.org
Closes: https://lore.kernel.org/oe-kbuild-all/202503181736.zkZUBv4N-lkp@intel.com/
During the bring-up of an x86 board, the kernel was crashing before
reaching the platform's console driver because of a bug in the firmware,
leaving no trace of the boot progress.
The only available method to debug the kernel boot process was via the
platform's MMIO-based UART, as the board lacked an I/O port-based UART,
PCI UART, or functional video output.
Then it turned out that earlyprintk= does not have a knob to configure
the MMIO-mapped UART.
Extend the early printk facility to support platform MMIO-based UARTs
on x86 systems, enabling debugging during the system bring-up phase.
The command line syntax to enable platform MMIO-based UART is:
earlyprintk=mmio,membase[,{nocfg|baudrate}][,keep]
Note, the change does not integrate MMIO-based UART support to:
arch/x86/boot/early_serial_console.c
Also, update kernel parameters documentation with the new syntax and
add the missing 'nocfg' setting to the PCI serial cards description.
Signed-off-by: Denis Mukhin <dmukhin@ford.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250324-earlyprintk-v3-1-aee7421dc469@ford.com
Commit:
2e4be0d011 ("x86/show_trace_log_lvl: Ensure stack pointer is aligned, again")
was intended to ensure alignment of the stack pointer; but it also moved
the initialization of the "stack" variable down into the loop header.
This was likely intended as a no-op cleanup, since the commit
message does not mention it; however, this caused a behavioral change
because the value of "regs" is different between the two places.
Originally, get_stack_pointer() used the regs provided by the caller; after
that commit, get_stack_pointer() instead uses the regs at the top of the
stack frame the unwinder is looking at. Often, there are no such regs at
all, and "regs" is NULL, causing get_stack_pointer() to fall back to the
task's current stack pointer, which is not what we want here, but probably
happens to mostly work. Other times, the original regs will point to
another regs frame - in that case, the linear guess unwind logic in
show_trace_log_lvl() will start unwinding too far up the stack, causing the
first frame found by the proper unwinder to never be visited, resulting in
a stack trace consisting purely of guess lines.
Fix it by moving the "stack = " assignment back where it belongs.
Fixes: 2e4be0d011 ("x86/show_trace_log_lvl: Ensure stack pointer is aligned, again")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250325-2025-03-unwind-fixes-v1-2-acd774364768@google.com
PUSH_REGS with save_ret=1 is used by interrupt entry helper functions that
initially start with a UNWIND_HINT_FUNC ORC state.
However, save_ret=1 means that we clobber the helper function's return
address (and then later restore the return address further down on the
stack); after that point, the only thing on the stack we can unwind through
is the IRET frame, so use UNWIND_HINT_IRET_REGS until we have a full
pt_regs frame.
( An alternate approach would be to move the pt_regs->di overwrite down
such that it is the final step of pt_regs setup; but I don't want to
rearrange entry code just to make unwinding a tiny bit more elegant. )
Fixes: 9e809d15d6 ("x86/entry: Reduce the code footprint of the 'idtentry' macro")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20250325-2025-03-unwind-fixes-v1-1-acd774364768@google.com
There are two issues that can appear when building with clang and
'-march=native'.
The first issue is a compiler crash in the ipv6 stack with clang-18,
such as when building allmodconfig. This was frequently reported on the
LLVM issue tracker:
# Link: https://github.com/llvm/llvm-project/issues?q=is%3Aissue%20ip6_rcv_core
Stack dump:
0. Program arguments: clang ... -march=native ... net/ipv6/ip6_input.c
1. <eof> parser at end of file
2. Code generation
3. Running pass 'Function Pass Manager' on module 'net/ipv6/ip6_input.c'.
4. Running pass 'X86 DAG->DAG Instruction Selection' on function '@ip6_rcv_core'
The second issue is certain -Wframe-larger-than warnings that appear
with clang versions prior to 19, which introduced an optimization that
produces much better code:
# Link: 90ba33099c [2]
clang-18:
drivers/media/pci/saa7164/saa7164-core.c:605:20: error: stack frame size (2392) exceeds limit (2048) in 'saa7164_irq' [-Werror,-Wframe-larger-than]
605 | static irqreturn_t saa7164_irq(int irq, void *dev_id)
| ^
clang-19:
drivers/media/pci/saa7164/saa7164-core.c:605:20: error: stack frame size (216) exceeds limit (128) in 'saa7164_irq' [-Werror,-Wframe-larger-than]
605 | static irqreturn_t saa7164_irq(int irq, void *dev_id)
| ^
Restrict the testing of the availability of '-march=native' to all
supported GCC versions and clang-19 and newer to avoid these known
resolved issues.
Fixes: 0480bc7e65dc ("x86/kbuild/64: Add the CONFIG_X86_NATIVE_CPU option to locally optimize the kernel with '-march=native'")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Tor Vic <torvic9@mailbox.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250324-x86-march-native-clang-19-and-newer-v1-1-3a05ed32a89e@kernel.org
Stephen reported this build failure when cross-compiling:
cc1: error: bad value 'native' for '-march=' switch
Test for the availability of the -march=native flag.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au> # build test
Cc: Tor Vic <torvic9@mailbox.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250324172723.49fb0416@canb.auug.org.au
Add a 'native' option that allows users to build an optimized kernel for
their local machine (i.e. the machine which is used to build the kernel)
by passing '-march=native' to CFLAGS.
The idea comes from Linus' reply to Arnd's initial proposal:
https://lore.kernel.org/all/CAHk-=wji1sV93yKbc==Z7OSSHBiDE=LAdG_d5Y-zPBrnSs0k2A@mail.gmail.com/
Here are some numbers comparing 'generic' to 'native' on a Skylake dual-core
laptop (generic --> native):
- vmlinux and compressed modules size:
125'907'744 bytes --> 125'595'280 bytes (-0.248 %)
18'810 kilobytes --> 18'770 kilobytes (-0.213 %)
- phoronix, average of 3 runs:
ffmpeg:
130.99 --> 131.15 (+0.122 %)
nginx:
10'650 --> 10'725 (+0.704 %)
hackbench (lower is better):
102.27 --> 99.50 (-2.709 %)
- xz compression of firefox tarball (lower is better):
319.57 seconds --> 317.34 seconds (-0.698 %)
- stress-ng, bogoops, average of 3 15-second runs:
fork:
111'744 --> 115'509 (+3.397 %)
bsearch:
7'211 --> 7'436 (+3.120 %)
memfd:
3'591 --> 3'604 (+0.362 %)
mmapfork:
630 --> 629 (-0.159 %)
schedmix:
42'715 --> 43'251 (+1.255 %)
epoll:
2'443'767 --> 2'454'413 (+0.436 %)
vm:
1'442'256 --> 1'486'615 (+3.076 %)
- schbench (two message threads), 30-second runs:
304 rps --> 305 rps (+0.329 %)
There is little difference both in terms of size and of performance, however
the native build comes out on top ever so slightly.
[ mingo: Renamed the option to CONFIG_X86_NATIVE_CPU, expanded the help text
and added Linus's Suggested-by tag. ]
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Tor Vic <torvic9@mailbox.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20250321142859.13889-1-torvic9@mailbox.org
Support for STA2X11-based systems was removed in February in:
dcbb01fbb7 ("x86/pci: Remove old STA2x11 support")
Intel MID for 32-bit platforms was removed from this list also in
February in:
ca5955dd5f ("x86/cpu: Document CONFIG_X86_INTEL_MID as 64-bit-only")
Intel MID for 64-bit platforms is a duplicate for "Merrifield/Moorefield
MID devices".
Fixes: 4047e8773f ("x86/Kconfig: Update lists in X86_EXTENDED_PLATFORM")
Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20250322175052.43611-1-mat.jonczyk@o2.pl
Currently, it is not true that the kernel will panic with CONFIG_X86_X2APIC=n
on systems that require it; it will try to disable the APIC and run without
it to at least give the user a clear warning message. See the second
variant of check_x2apic() in arch/x86/kernel/apic/apic.c .
Also massage some other parts of the help text.
Fixes: 9232c49ff3 ("x86/Kconfig: Enable X86_X2APIC by default and improve help text")
Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250322154541.40325-1-mat.jonczyk@o2.pl
We've had this before: when we remove infrastructure to generate files,
the old stale build artifacts still remain in-tree. And when the
infrastructure to generate them is gone, so is the gitignore file for
those build artifacts.
End result: git will see the old generated files, and people will
mistakenly commit them. That's what happened with the 'genheaders' file
not that long ago (see commit 04a3389b35 "Remove stale generated
'genheaders' file").
This time it's commit 9c54baab44 ("x86/boot: Drop CRC-32 checksum and
the build tool that generates it") that removed the 'build' file from
the arch/x86/boot/tools/ subdirectory, and removed the .gitignore file
too (because the whole subdirectory is gone).
And as a result, if you don't do a 'git clean -dqfx' or similar to clean
up your tree, 'git status' will say
Untracked files:
(use "git add <file>..." to include in what will be committed)
arch/x86/boot/tools/
and some hapless sleep-deprived developer will inevitably decide that
that means that they need to 'git add' that directory. Which would
bring back some stale generated file that we most definitely do not want
in the tree.
So when removing directories that had special .gitignore patterns, make
sure to add a new gitignore entry in the parent directory for the no
longer existing subdirectory.
It will avoid mistakes.
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Fixes: 9c54baab44 ("x86/boot: Drop CRC-32 checksum and the build tool that generates it")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=eh6a
-----END PGP SIGNATURE-----
Merge tag 'x86-platform-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 platform updates from Ingo Molnar:
"Two small cleanups in the x86 platform support code"
* tag 'x86-platform-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/platform/olpc: Remove unused variable 'len' in olpc_dt_compatible_match()
x86/platform/olpc-xo1-sci: Don't include <linux/pm_wakeup.h> directly
Mirsad Todorovac, Randy Dunlap, Thorsten Blum and Zhang Kunbo.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=GsK4
-----END PGP SIGNATURE-----
Merge tag 'x86-cleanups-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Ingo Molnar:
"Miscellaneous x86 cleanups by Arnd Bergmann, Charles Han, Mirsad
Todorovac, Randy Dunlap, Thorsten Blum and Zhang Kunbo"
* tag 'x86-cleanups-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/coco: Replace 'static const cc_mask' with the newly introduced cc_get_mask() function
x86/delay: Fix inconsistent whitespace
selftests/x86/syscall: Fix coccinelle WARNING recommending the use of ARRAY_SIZE()
x86/platform: Fix missing declaration of 'x86_apple_machine'
x86/irq: Fix missing declaration of 'io_apic_irqs'
x86/usercopy: Fix kernel-doc func param name in clean_cache_range()'s description
x86/apic: Use str_disabled_enabled() helper in print_ipi_mode()
- Improve crypto performance by making kernel-mode FPU reliably usable
in softirqs ((Eric Biggers)
- Fully optimize out WARN_ON_FPU() (Eric Biggers)
- Initial steps to support Support Intel APX (Advanced Performance Extensions)
(Chang S. Bae)
- Fix KASAN for arch_dup_task_struct() (Benjamin Berg)
- Refine and simplify the FPU magic number check during signal return
(Chang S. Bae)
- Fix inconsistencies in guest FPU xfeatures (Chao Gao, Stanislav Spassov)
- selftests/x86/xstate: Introduce common code for testing extended states
(Chang S. Bae)
- Misc fixes and cleanups (Borislav Petkov, Colin Ian King, Uros Bizjak)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=U7PR
-----END PGP SIGNATURE-----
Merge tag 'x86-fpu-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86/fpu updates from Ingo Molnar:
- Improve crypto performance by making kernel-mode FPU reliably usable
in softirqs ((Eric Biggers)
- Fully optimize out WARN_ON_FPU() (Eric Biggers)
- Initial steps to support Support Intel APX (Advanced Performance
Extensions) (Chang S. Bae)
- Fix KASAN for arch_dup_task_struct() (Benjamin Berg)
- Refine and simplify the FPU magic number check during signal return
(Chang S. Bae)
- Fix inconsistencies in guest FPU xfeatures (Chao Gao, Stanislav
Spassov)
- selftests/x86/xstate: Introduce common code for testing extended
states (Chang S. Bae)
- Misc fixes and cleanups (Borislav Petkov, Colin Ian King, Uros
Bizjak)
* tag 'x86-fpu-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu/xstate: Fix inconsistencies in guest FPU xfeatures
x86/fpu: Clarify the "xa" symbolic name used in the XSTATE* macros
x86/fpu: Use XSAVE{,OPT,C,S} and XRSTOR{,S} mnemonics in xstate.h
x86/fpu: Improve crypto performance by making kernel-mode FPU reliably usable in softirqs
x86/fpu/xstate: Simplify print_xstate_features()
x86/fpu: Refine and simplify the magic number check during signal return
selftests/x86/xstate: Fix spelling mistake "hader" -> "header"
x86/fpu: Avoid copying dynamic FP state from init_task in arch_dup_task_struct()
vmlinux.lds.h: Remove entry to place init_task onto init_stack
selftests/x86/avx: Add AVX tests
selftests/x86/xstate: Clarify supported xstates
selftests/x86/xstate: Consolidate test invocations into a single entry
selftests/x86/xstate: Introduce signal ABI test
selftests/x86/xstate: Refactor ptrace ABI test
selftests/x86/xstate: Refactor context switching test
selftests/x86/xstate: Enumerate and name xstate components
selftests/x86/xstate: Refactor XSAVE helpers for general use
selftests/x86: Consolidate redundant signal helper functions
x86/fpu: Fix guest FPU state buffer allocation size
x86/fpu: Fully optimize out WARN_ON_FPU()
- Memblock setup and other early boot code cleanups (Mike Rapoport)
- Export e820_table_kexec[] to sysfs (Dave Young)
- Baby steps of adding relocate_kernel() debugging support (David Woodhouse)
- Replace open-coded parity calculation with parity8() (Kuan-Wei Chiu)
- Move the LA57 trampoline to separate source file (Ard Biesheuvel)
- Misc micro-optimizations (Uros Bizjak)
- Drop obsolete E820_TYPE_RESERVED_KERN and related code (Mike Rapoport)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=cUeH
-----END PGP SIGNATURE-----
Merge tag 'x86-boot-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 boot code updates from Ingo Molnar:
- Memblock setup and other early boot code cleanups (Mike Rapoport)
- Export e820_table_kexec[] to sysfs (Dave Young)
- Baby steps of adding relocate_kernel() debugging support (David
Woodhouse)
- Replace open-coded parity calculation with parity8() (Kuan-Wei Chiu)
- Move the LA57 trampoline to separate source file (Ard Biesheuvel)
- Misc micro-optimizations (Uros Bizjak)
- Drop obsolete E820_TYPE_RESERVED_KERN and related code (Mike
Rapoport)
* tag 'x86-boot-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/kexec: Add relocate_kernel() debugging support: Load a GDT
x86/boot: Move the LA57 trampoline to separate source file
x86/boot: Do not test if AC and ID eflags are changeable on x86_64
x86/bootflag: Replace open-coded parity calculation with parity8()
x86/bootflag: Micro-optimize sbf_write()
x86/boot: Add missing has_cpuflag() prototype
x86/kexec: Export e820_table_kexec[] to sysfs
x86/boot: Change some static bootflag functions to bool
x86/e820: Drop obsolete E820_TYPE_RESERVED_KERN and related code
x86/boot: Split parsing of boot_params into the parse_boot_params() helper function
x86/boot: Split kernel resources setup into the setup_kernel_resources() helper function
x86/boot: Move setting of memblock parameters to e820__memblock_setup()
- Drop CRC-32 checksum and the build tool that generates it
(Ard Biesheuvel)
- Fix broken copy command in genimage.sh when making isoimage
(Nir Lichtman)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=nLmp
-----END PGP SIGNATURE-----
Merge tag 'x86-build-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 build updates from Ingo Molnar:
- Drop CRC-32 checksum and the build tool that generates it (Ard
Biesheuvel)
- Fix broken copy command in genimage.sh when making isoimage (Nir
Lichtman)
* tag 'x86-build-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot: Add back some padding for the CRC-32 checksum
x86/boot: Drop CRC-32 checksum and the build tool that generates it
x86/build: Fix broken copy command in genimage.sh when making isoimage
two locking commits in the locking tree,
part of the locking-core-2025-03-22 pull request. ]
x86 CPU features support:
- Generate the <asm/cpufeaturemasks.h> header based on build config
(H. Peter Anvin, Xin Li)
- x86 CPUID parsing updates and fixes (Ahmed S. Darwish)
- Introduce the 'setcpuid=' boot parameter (Brendan Jackman)
- Enable modifying CPU bug flags with '{clear,set}puid='
(Brendan Jackman)
- Utilize CPU-type for CPU matching (Pawan Gupta)
- Warn about unmet CPU feature dependencies (Sohil Mehta)
- Prepare for new Intel Family numbers (Sohil Mehta)
Percpu code:
- Standardize & reorganize the x86 percpu layout and
related cleanups (Brian Gerst)
- Convert the stackprotector canary to a regular percpu
variable (Brian Gerst)
- Add a percpu subsection for cache hot data (Brian Gerst)
- Unify __pcpu_op{1,2}_N() macros to __pcpu_op_N() (Uros Bizjak)
- Construct __percpu_seg_override from __percpu_seg (Uros Bizjak)
MM:
- Add support for broadcast TLB invalidation using AMD's INVLPGB instruction
(Rik van Riel)
- Rework ROX cache to avoid writable copy (Mike Rapoport)
- PAT: restore large ROX pages after fragmentation
(Kirill A. Shutemov, Mike Rapoport)
- Make memremap(MEMREMAP_WB) map memory as encrypted by default
(Kirill A. Shutemov)
- Robustify page table initialization (Kirill A. Shutemov)
- Fix flush_tlb_range() when used for zapping normal PMDs (Jann Horn)
- Clear _PAGE_DIRTY for kernel mappings when we clear _PAGE_RW
(Matthew Wilcox)
KASLR:
- x86/kaslr: Reduce KASLR entropy on most x86 systems,
to support PCI BAR space beyond the 10TiB region
(CONFIG_PCI_P2PDMA=y) (Balbir Singh)
CPU bugs:
- Implement FineIBT-BHI mitigation (Peter Zijlstra)
- speculation: Simplify and make CALL_NOSPEC consistent (Pawan Gupta)
- speculation: Add a conditional CS prefix to CALL_NOSPEC (Pawan Gupta)
- RFDS: Exclude P-only parts from the RFDS affected list (Pawan Gupta)
System calls:
- Break up entry/common.c (Brian Gerst)
- Move sysctls into arch/x86 (Joel Granados)
Intel LAM support updates: (Maciej Wieczor-Retman)
- selftests/lam: Move cpu_has_la57() to use cpuinfo flag
- selftests/lam: Skip test if LAM is disabled
- selftests/lam: Test get_user() LAM pointer handling
AMD SMN access updates:
- Add SMN offsets to exclusive region access (Mario Limonciello)
- Add support for debugfs access to SMN registers (Mario Limonciello)
- Have HSMP use SMN through AMD_NODE (Yazen Ghannam)
Power management updates: (Patryk Wlazlyn)
- Allow calling mwait_play_dead with an arbitrary hint
- ACPI/processor_idle: Add FFH state handling
- intel_idle: Provide the default enter_dead() handler
- Eliminate mwait_play_dead_cpuid_hint()
Bootup:
Build system:
- Raise the minimum GCC version to 8.1 (Brian Gerst)
- Raise the minimum LLVM version to 15.0.0
(Nathan Chancellor)
Kconfig: (Arnd Bergmann)
- Add cmpxchg8b support back to Geode CPUs
- Drop 32-bit "bigsmp" machine support
- Rework CONFIG_GENERIC_CPU compiler flags
- Drop configuration options for early 64-bit CPUs
- Remove CONFIG_HIGHMEM64G support
- Drop CONFIG_SWIOTLB for PAE
- Drop support for CONFIG_HIGHPTE
- Document CONFIG_X86_INTEL_MID as 64-bit-only
- Remove old STA2x11 support
- Only allow CONFIG_EISA for 32-bit
Headers:
- Replace __ASSEMBLY__ with __ASSEMBLER__ in UAPI and non-UAPI headers
(Thomas Huth)
Assembly code & machine code patching:
- x86/alternatives: Simplify alternative_call() interface (Josh Poimboeuf)
- x86/alternatives: Simplify callthunk patching (Peter Zijlstra)
- KVM: VMX: Use named operands in inline asm (Josh Poimboeuf)
- x86/hyperv: Use named operands in inline asm (Josh Poimboeuf)
- x86/traps: Cleanup and robustify decode_bug() (Peter Zijlstra)
- x86/kexec: Merge x86_32 and x86_64 code using macros from <asm/asm.h>
(Uros Bizjak)
- Use named operands in inline asm (Uros Bizjak)
- Improve performance by using asm_inline() for atomic locking instructions
(Uros Bizjak)
Earlyprintk:
- Harden early_serial (Peter Zijlstra)
NMI handler:
- Add an emergency handler in nmi_desc & use it in nmi_shootdown_cpus()
(Waiman Long)
Miscellaneous fixes and cleanups:
- by Ahmed S. Darwish, Andy Shevchenko, Ard Biesheuvel,
Artem Bityutskiy, Borislav Petkov, Brendan Jackman, Brian Gerst,
Dan Carpenter, Dr. David Alan Gilbert, H. Peter Anvin,
Ingo Molnar, Josh Poimboeuf, Kevin Brodsky, Mike Rapoport,
Lukas Bulwahn, Maciej Wieczor-Retman, Max Grobecker,
Patryk Wlazlyn, Pawan Gupta, Peter Zijlstra,
Philip Redkin, Qasim Ijaz, Rik van Riel, Thomas Gleixner,
Thorsten Blum, Tom Lendacky, Tony Luck, Uros Bizjak,
Vitaly Kuznetsov, Xin Li, liuye.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmfenkQRHG1pbmdvQGtl
cm5lbC5vcmcACgkQEnMQ0APhK1g1FRAAi6OFTSn/5aeLMI0IMNBxJ6ddQiFc3imd
7+C/vU5nul4CyDs8mKyj/+f/DDrbkG9lKz3VG631Yl237lXHjD8XWcVMeC/1z/q0
3zInDIloE9/nBHRPkF6F7fARBLBZ0LFgaBsGrCo7mwpGybiQdqGcqcxllvTbtXaw
OHta4q6ok+lBDNlfc0v6H4cRnzhmmlKu6Ng0j6UI3V7uFhi3vtxas32ltDQtzorq
2+jbV6/+kbrrv+xPC+jlzOFhTEKRupNPQXmvyQteoQg6G3kqAKMDvBthGXd1rHuX
Qa+BoDIifE/2NiVeRwNrhoqYH/pHCzUzDREW5IW8+ca+4XNKuzAC6EuC8CeCzyK1
q8ZjZjooQW4zEeVFeJYllHONzJYfxfSH5CLsnbcuhq99yfGlrQhF1qL72/Omn1w/
DfPJM8Zt5zyKvLqUg3Md+fkVCO2wyDNhB61QPzRgHF+yD+rvuDpoqvUWir+w7cSn
fwEDVZGXlFx6dumtSrqRaTd1nvFt80s8yP2ll09DMvGQ8D/yruS7hndGAmmJVCSW
NAfd8pSjq5v2+ux2UR92/Cc3VF3SjaUqHBOp/Nq9rESya18ZVa3cJpHhVYYtPIVf
THW0h07RIkGVKs1uq+5ekLCr/8uAZg58UPIqmhTuW0ttymRHCNfohR45FQZzy+0M
tJj1oc2TIZw=
=Dcb3
-----END PGP SIGNATURE-----
Merge tag 'x86-core-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core x86 updates from Ingo Molnar:
"x86 CPU features support:
- Generate the <asm/cpufeaturemasks.h> header based on build config
(H. Peter Anvin, Xin Li)
- x86 CPUID parsing updates and fixes (Ahmed S. Darwish)
- Introduce the 'setcpuid=' boot parameter (Brendan Jackman)
- Enable modifying CPU bug flags with '{clear,set}puid=' (Brendan
Jackman)
- Utilize CPU-type for CPU matching (Pawan Gupta)
- Warn about unmet CPU feature dependencies (Sohil Mehta)
- Prepare for new Intel Family numbers (Sohil Mehta)
Percpu code:
- Standardize & reorganize the x86 percpu layout and related cleanups
(Brian Gerst)
- Convert the stackprotector canary to a regular percpu variable
(Brian Gerst)
- Add a percpu subsection for cache hot data (Brian Gerst)
- Unify __pcpu_op{1,2}_N() macros to __pcpu_op_N() (Uros Bizjak)
- Construct __percpu_seg_override from __percpu_seg (Uros Bizjak)
MM:
- Add support for broadcast TLB invalidation using AMD's INVLPGB
instruction (Rik van Riel)
- Rework ROX cache to avoid writable copy (Mike Rapoport)
- PAT: restore large ROX pages after fragmentation (Kirill A.
Shutemov, Mike Rapoport)
- Make memremap(MEMREMAP_WB) map memory as encrypted by default
(Kirill A. Shutemov)
- Robustify page table initialization (Kirill A. Shutemov)
- Fix flush_tlb_range() when used for zapping normal PMDs (Jann Horn)
- Clear _PAGE_DIRTY for kernel mappings when we clear _PAGE_RW
(Matthew Wilcox)
KASLR:
- x86/kaslr: Reduce KASLR entropy on most x86 systems, to support PCI
BAR space beyond the 10TiB region (CONFIG_PCI_P2PDMA=y) (Balbir
Singh)
CPU bugs:
- Implement FineIBT-BHI mitigation (Peter Zijlstra)
- speculation: Simplify and make CALL_NOSPEC consistent (Pawan Gupta)
- speculation: Add a conditional CS prefix to CALL_NOSPEC (Pawan
Gupta)
- RFDS: Exclude P-only parts from the RFDS affected list (Pawan
Gupta)
System calls:
- Break up entry/common.c (Brian Gerst)
- Move sysctls into arch/x86 (Joel Granados)
Intel LAM support updates: (Maciej Wieczor-Retman)
- selftests/lam: Move cpu_has_la57() to use cpuinfo flag
- selftests/lam: Skip test if LAM is disabled
- selftests/lam: Test get_user() LAM pointer handling
AMD SMN access updates:
- Add SMN offsets to exclusive region access (Mario Limonciello)
- Add support for debugfs access to SMN registers (Mario Limonciello)
- Have HSMP use SMN through AMD_NODE (Yazen Ghannam)
Power management updates: (Patryk Wlazlyn)
- Allow calling mwait_play_dead with an arbitrary hint
- ACPI/processor_idle: Add FFH state handling
- intel_idle: Provide the default enter_dead() handler
- Eliminate mwait_play_dead_cpuid_hint()
Build system:
- Raise the minimum GCC version to 8.1 (Brian Gerst)
- Raise the minimum LLVM version to 15.0.0 (Nathan Chancellor)
Kconfig: (Arnd Bergmann)
- Add cmpxchg8b support back to Geode CPUs
- Drop 32-bit "bigsmp" machine support
- Rework CONFIG_GENERIC_CPU compiler flags
- Drop configuration options for early 64-bit CPUs
- Remove CONFIG_HIGHMEM64G support
- Drop CONFIG_SWIOTLB for PAE
- Drop support for CONFIG_HIGHPTE
- Document CONFIG_X86_INTEL_MID as 64-bit-only
- Remove old STA2x11 support
- Only allow CONFIG_EISA for 32-bit
Headers:
- Replace __ASSEMBLY__ with __ASSEMBLER__ in UAPI and non-UAPI
headers (Thomas Huth)
Assembly code & machine code patching:
- x86/alternatives: Simplify alternative_call() interface (Josh
Poimboeuf)
- x86/alternatives: Simplify callthunk patching (Peter Zijlstra)
- KVM: VMX: Use named operands in inline asm (Josh Poimboeuf)
- x86/hyperv: Use named operands in inline asm (Josh Poimboeuf)
- x86/traps: Cleanup and robustify decode_bug() (Peter Zijlstra)
- x86/kexec: Merge x86_32 and x86_64 code using macros from
<asm/asm.h> (Uros Bizjak)
- Use named operands in inline asm (Uros Bizjak)
- Improve performance by using asm_inline() for atomic locking
instructions (Uros Bizjak)
Earlyprintk:
- Harden early_serial (Peter Zijlstra)
NMI handler:
- Add an emergency handler in nmi_desc & use it in
nmi_shootdown_cpus() (Waiman Long)
Miscellaneous fixes and cleanups:
- by Ahmed S. Darwish, Andy Shevchenko, Ard Biesheuvel, Artem
Bityutskiy, Borislav Petkov, Brendan Jackman, Brian Gerst, Dan
Carpenter, Dr. David Alan Gilbert, H. Peter Anvin, Ingo Molnar,
Josh Poimboeuf, Kevin Brodsky, Mike Rapoport, Lukas Bulwahn, Maciej
Wieczor-Retman, Max Grobecker, Patryk Wlazlyn, Pawan Gupta, Peter
Zijlstra, Philip Redkin, Qasim Ijaz, Rik van Riel, Thomas Gleixner,
Thorsten Blum, Tom Lendacky, Tony Luck, Uros Bizjak, Vitaly
Kuznetsov, Xin Li, liuye"
* tag 'x86-core-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (211 commits)
zstd: Increase DYNAMIC_BMI2 GCC version cutoff from 4.8 to 11.0 to work around compiler segfault
x86/asm: Make asm export of __ref_stack_chk_guard unconditional
x86/mm: Only do broadcast flush from reclaim if pages were unmapped
perf/x86/intel, x86/cpu: Replace Pentium 4 model checks with VFM ones
perf/x86/intel, x86/cpu: Simplify Intel PMU initialization
x86/headers: Replace __ASSEMBLY__ with __ASSEMBLER__ in non-UAPI headers
x86/headers: Replace __ASSEMBLY__ with __ASSEMBLER__ in UAPI headers
x86/locking/atomic: Improve performance by using asm_inline() for atomic locking instructions
x86/asm: Use asm_inline() instead of asm() in clwb()
x86/asm: Use CLFLUSHOPT and CLWB mnemonics in <asm/special_insns.h>
x86/hweight: Use asm_inline() instead of asm()
x86/hweight: Use ASM_CALL_CONSTRAINT in inline asm()
x86/hweight: Use named operands in inline asm()
x86/stackprotector/64: Only export __ref_stack_chk_guard on CONFIG_SMP
x86/head/64: Avoid Clang < 17 stack protector in startup code
x86/kexec: Merge x86_32 and x86_64 code using macros from <asm/asm.h>
x86/runtime-const: Add the RUNTIME_CONST_PTR assembly macro
x86/cpu/intel: Limit the non-architectural constant_tsc model checks
x86/mm/pat: Replace Intel x86_model checks with VFM ones
x86/cpu/intel: Fix fast string initialization for extended Families
...
Core:
- Move perf_event sysctls into kernel/events/ (Joel Granados)
- Use POLLHUP for pinned events in error (Namhyung Kim)
- Avoid the read if the count is already updated (Peter Zijlstra)
- Allow the EPOLLRDNORM flag for poll (Tao Chen)
- locking/percpu-rwsem: Add guard support (Peter Zijlstra)
[ NOTE: this got (mis-)merged into the perf tree due to related work. ]
perf_pmu_unregister() related improvements: (Peter Zijlstra)
- Simplify the perf_event_alloc() error path
- Simplify the perf_pmu_register() error path
- Simplify perf_pmu_register()
- Simplify perf_init_event()
- Simplify perf_event_alloc()
- Merge struct pmu::pmu_disable_count into struct perf_cpu_pmu_context::pmu_disable_count
- Add this_cpc() helper
- Introduce perf_free_addr_filters()
- Robustify perf_event_free_bpf_prog()
- Simplify the perf_mmap() control flow
- Further simplify perf_mmap()
- Remove retry loop from perf_mmap()
- Lift event->mmap_mutex in perf_mmap()
- Detach 'struct perf_cpu_pmu_context' and 'struct pmu' lifetimes
- Fix perf_mmap() failure path
Uprobes:
- Harden x86 uretprobe syscall trampoline check (Jiri Olsa)
- Remove redundant spinlock in uprobe_deny_signal() (Liao Chang)
- Remove the spinlock within handle_singlestep() (Liao Chang)
x86 Intel PMU enhancements:
- Support PEBS counters snapshotting (Kan Liang)
- Fix intel_pmu_read_event() (Kan Liang)
- Extend per event callchain limit to branch stack (Kan Liang)
- Fix system-wide LBR profiling (Kan Liang)
- Allocate bts_ctx only if necessary (Li RongQing)
- Apply static call for drain_pebs (Peter Zijlstra)
x86 AMD PMU enhancements: (Ravi Bangoria)
- Remove pointless sample period check
- Fix ->config to sample period calculation for OP PMU
- Fix perf_ibs_op.cnt_mask for CurCnt
- Don't allow freq mode event creation through ->config interface
- Add PMU specific minimum period
- Add ->check_period() callback
- Ceil sample_period to min_period
- Add support for OP Load Latency Filtering
- Update DTLB/PageSize decode logic
Hardware breakpoints:
- Return EOPNOTSUPP for unsupported breakpoint type (Saket Kumar Bhaskar)
Hardlockup detector improvements: (Li Huafei)
- perf_event memory leak
- Warn if watchdog_ev is leaked
Fixes and cleanups:
- Misc fixes and cleanups (Andy Shevchenko, Kan Liang, Peter Zijlstra,
Ravi Bangoria, Thorsten Blum, XieLudan)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=iPmA
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull performance events updates from Ingo Molnar:
"Core:
- Move perf_event sysctls into kernel/events/ (Joel Granados)
- Use POLLHUP for pinned events in error (Namhyung Kim)
- Avoid the read if the count is already updated (Peter Zijlstra)
- Allow the EPOLLRDNORM flag for poll (Tao Chen)
- locking/percpu-rwsem: Add guard support [ NOTE: this got
(mis-)merged into the perf tree due to related work ] (Peter
Zijlstra)
perf_pmu_unregister() related improvements: (Peter Zijlstra)
- Simplify the perf_event_alloc() error path
- Simplify the perf_pmu_register() error path
- Simplify perf_pmu_register()
- Simplify perf_init_event()
- Simplify perf_event_alloc()
- Merge struct pmu::pmu_disable_count into struct
perf_cpu_pmu_context::pmu_disable_count
- Add this_cpc() helper
- Introduce perf_free_addr_filters()
- Robustify perf_event_free_bpf_prog()
- Simplify the perf_mmap() control flow
- Further simplify perf_mmap()
- Remove retry loop from perf_mmap()
- Lift event->mmap_mutex in perf_mmap()
- Detach 'struct perf_cpu_pmu_context' and 'struct pmu' lifetimes
- Fix perf_mmap() failure path
Uprobes:
- Harden x86 uretprobe syscall trampoline check (Jiri Olsa)
- Remove redundant spinlock in uprobe_deny_signal() (Liao Chang)
- Remove the spinlock within handle_singlestep() (Liao Chang)
x86 Intel PMU enhancements:
- Support PEBS counters snapshotting (Kan Liang)
- Fix intel_pmu_read_event() (Kan Liang)
- Extend per event callchain limit to branch stack (Kan Liang)
- Fix system-wide LBR profiling (Kan Liang)
- Allocate bts_ctx only if necessary (Li RongQing)
- Apply static call for drain_pebs (Peter Zijlstra)
x86 AMD PMU enhancements: (Ravi Bangoria)
- Remove pointless sample period check
- Fix ->config to sample period calculation for OP PMU
- Fix perf_ibs_op.cnt_mask for CurCnt
- Don't allow freq mode event creation through ->config interface
- Add PMU specific minimum period
- Add ->check_period() callback
- Ceil sample_period to min_period
- Add support for OP Load Latency Filtering
- Update DTLB/PageSize decode logic
Hardware breakpoints:
- Return EOPNOTSUPP for unsupported breakpoint type (Saket Kumar
Bhaskar)
Hardlockup detector improvements: (Li Huafei)
- perf_event memory leak
- Warn if watchdog_ev is leaked
Fixes and cleanups:
- Misc fixes and cleanups (Andy Shevchenko, Kan Liang, Peter
Zijlstra, Ravi Bangoria, Thorsten Blum, XieLudan)"
* tag 'perf-core-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (55 commits)
perf: Fix __percpu annotation
perf: Clean up pmu specific data
perf/x86: Remove swap_task_ctx()
perf/x86/lbr: Fix shorter LBRs call stacks for the system-wide mode
perf: Supply task information to sched_task()
perf: attach/detach PMU specific data
locking/percpu-rwsem: Add guard support
perf: Save PMU specific data in task_struct
perf: Extend per event callchain limit to branch stack
perf/ring_buffer: Allow the EPOLLRDNORM flag for poll
perf/core: Use POLLHUP for pinned events in error
perf/core: Use sysfs_emit() instead of scnprintf()
perf/core: Remove optional 'size' arguments from strscpy() calls
perf/x86/intel/bts: Check if bts_ctx is allocated when calling BTS functions
uprobes/x86: Harden uretprobe syscall trampoline check
watchdog/hardlockup/perf: Warn if watchdog_ev is leaked
watchdog/hardlockup/perf: Fix perf_event memory leak
perf/x86: Annotate struct bts_buffer::buf with __counted_by()
perf/core: Clean up perf_try_init_event()
perf/core: Fix perf_mmap() failure path
...
[ Merge note, these two commits are identical:
- f3fa0e40df ("sched/clock: Don't define sched_clock_irqtime as static key")
- b9f2b29b94 ("sched: Don't define sched_clock_irqtime as static key")
The first one is a cherry-picked version of the second, and the first one
is already upstream. ]
Core & fair scheduler changes:
- Cancel the slice protection of the idle entity (Zihan Zhou)
- Reduce the default slice to avoid tasks getting an extra tick
(Zihan Zhou)
- Force propagating min_slice of cfs_rq when {en,de}queue tasks
(Tianchen Ding)
- Refactor can_migrate_task() to elimate looping (I Hsin Cheng)
- Add unlikey branch hints to several system calls (Colin Ian King)
- Optimize current_clr_polling() on certain architectures (Yujun Dong)
Deadline scheduler: (Juri Lelli)
- Remove redundant dl_clear_root_domain call
- Move dl_rebuild_rd_accounting to cpuset.h
Uclamp:
- Use the uclamp_is_used() helper instead of open-coding it (Xuewen Yan)
- Optimize sched_uclamp_used static key enabling (Xuewen Yan)
Scheduler topology support: (Juri Lelli)
- Ignore special tasks when rebuilding domains
- Add wrappers for sched_domains_mutex
- Generalize unique visiting of root domains
- Rebuild root domain accounting after every update
- Remove partition_and_rebuild_sched_domains
- Stop exposing partition_sched_domains_locked
RSEQ: (Michael Jeanson)
- Update kernel fields in lockstep with CONFIG_DEBUG_RSEQ=y
- Fix segfault on registration when rseq_cs is non-zero
- selftests: Add rseq syscall errors test
- selftests: Ensure the rseq ABI TLS is actually 1024 bytes
Membarriers:
- Fix redundant load of membarrier_state (Nysal Jan K.A.)
Scheduler debugging:
- Introduce and use preempt_model_str() (Sebastian Andrzej Siewior)
- Make CONFIG_SCHED_DEBUG unconditional (Ingo Molnar)
Fixes and cleanups:
- Always save/restore x86 TSC sched_clock() on suspend/resume
(Guilherme G. Piccoli)
- Misc fixes and cleanups (Thorsten Blum, Juri Lelli,
Sebastian Andrzej Siewior)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=SuQE
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Core & fair scheduler changes:
- Cancel the slice protection of the idle entity (Zihan Zhou)
- Reduce the default slice to avoid tasks getting an extra tick
(Zihan Zhou)
- Force propagating min_slice of cfs_rq when {en,de}queue tasks
(Tianchen Ding)
- Refactor can_migrate_task() to elimate looping (I Hsin Cheng)
- Add unlikey branch hints to several system calls (Colin Ian King)
- Optimize current_clr_polling() on certain architectures (Yujun
Dong)
Deadline scheduler: (Juri Lelli)
- Remove redundant dl_clear_root_domain call
- Move dl_rebuild_rd_accounting to cpuset.h
Uclamp:
- Use the uclamp_is_used() helper instead of open-coding it (Xuewen
Yan)
- Optimize sched_uclamp_used static key enabling (Xuewen Yan)
Scheduler topology support: (Juri Lelli)
- Ignore special tasks when rebuilding domains
- Add wrappers for sched_domains_mutex
- Generalize unique visiting of root domains
- Rebuild root domain accounting after every update
- Remove partition_and_rebuild_sched_domains
- Stop exposing partition_sched_domains_locked
RSEQ: (Michael Jeanson)
- Update kernel fields in lockstep with CONFIG_DEBUG_RSEQ=y
- Fix segfault on registration when rseq_cs is non-zero
- selftests: Add rseq syscall errors test
- selftests: Ensure the rseq ABI TLS is actually 1024 bytes
Membarriers:
- Fix redundant load of membarrier_state (Nysal Jan K.A.)
Scheduler debugging:
- Introduce and use preempt_model_str() (Sebastian Andrzej Siewior)
- Make CONFIG_SCHED_DEBUG unconditional (Ingo Molnar)
Fixes and cleanups:
- Always save/restore x86 TSC sched_clock() on suspend/resume
(Guilherme G. Piccoli)
- Misc fixes and cleanups (Thorsten Blum, Juri Lelli, Sebastian
Andrzej Siewior)"
* tag 'sched-core-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits)
cpuidle, sched: Use smp_mb__after_atomic() in current_clr_polling()
sched/debug: Remove CONFIG_SCHED_DEBUG
sched/debug: Remove CONFIG_SCHED_DEBUG from self-test config files
sched/debug, Documentation: Remove (most) CONFIG_SCHED_DEBUG references from documentation
sched/debug: Make CONFIG_SCHED_DEBUG functionality unconditional
sched/debug: Make 'const_debug' tunables unconditional __read_mostly
sched/debug: Change SCHED_WARN_ON() to WARN_ON_ONCE()
rseq/selftests: Fix namespace collision with rseq UAPI header
include/{topology,cpuset}: Move dl_rebuild_rd_accounting to cpuset.h
sched/topology: Stop exposing partition_sched_domains_locked
cgroup/cpuset: Remove partition_and_rebuild_sched_domains
sched/topology: Remove redundant dl_clear_root_domain call
sched/deadline: Rebuild root domain accounting after every update
sched/deadline: Generalize unique visiting of root domains
sched/topology: Wrappers for sched_domains_mutex
sched/deadline: Ignore special tasks when rebuilding domains
tracing: Use preempt_model_str()
xtensa: Rely on generic printing of preemption model
x86: Rely on generic printing of preemption model
s390: Rely on generic printing of preemption model
...
- The biggest change is the new option to automatically fail
the build on objtool warnings: CONFIG_OBJTOOL_WERROR.
While there are no currently known unfixed false positives
left, such an expansion in the severity of objtool warnings
inevitably creates a risk of build failures, so it's disabled by
default and depends on !COMPILE_TEST, so it shouldn't be enabled
on allyesconfig/allmodconfig builds and won't be forced on people
who just accept build-time defaults in 'make oldconfig'.
While the option is strongly recommended, only people who enable
it explicitly should see it.
(Josh Poimboeuf)
- Disable branch profiling in noinstr code with a broad
brush that includes all of arch/x86/ and kernel/sched/. (Josh Poimboeuf)
- Create backup object files on objtool errors and print exact
objtool arguments to make failure analysis easier (Josh Poimboeuf)
- Improve noreturn handling (Josh Poimboeuf)
- Improve rodata handling (Tiezhu Yang)
- Support jump tables, switch tables and goto tables on LoongArch (Tiezhu Yang)
- Misc cleanups and fixes (Josh Poimboeuf, David Engraf, Ingo Molnar)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=iswJ
-----END PGP SIGNATURE-----
Merge tag 'objtool-core-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
- The biggest change is the new option to automatically fail the build
on objtool warnings: CONFIG_OBJTOOL_WERROR.
While there are no currently known unfixed false positives left, such
an expansion in the severity of objtool warnings inevitably creates a
risk of build failures, so it's disabled by default and depends on
!COMPILE_TEST, so it shouldn't be enabled on
allyesconfig/allmodconfig builds and won't be forced on people who
just accept build-time defaults in 'make oldconfig'.
While the option is strongly recommended, only people who enable it
explicitly should see it.
(Josh Poimboeuf)
- Disable branch profiling in noinstr code with a broad brush that
includes all of arch/x86/ and kernel/sched/. (Josh Poimboeuf)
- Create backup object files on objtool errors and print exact objtool
arguments to make failure analysis easier (Josh Poimboeuf)
- Improve noreturn handling (Josh Poimboeuf)
- Improve rodata handling (Tiezhu Yang)
- Support jump tables, switch tables and goto tables on LoongArch
(Tiezhu Yang)
- Misc cleanups and fixes (Josh Poimboeuf, David Engraf, Ingo Molnar)
* tag 'objtool-core-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
tracing: Disable branch profiling in noinstr code
objtool: Use O_CREAT with explicit mode mask
objtool: Add CONFIG_OBJTOOL_WERROR
objtool: Create backup on error and print args
objtool: Change "warning:" to "error:" for --Werror
objtool: Add --Werror option
objtool: Add --output option
objtool: Upgrade "Linked object detected" warning to error
objtool: Consolidate option validation
objtool: Remove --unret dependency on --rethunk
objtool: Increase per-function WARN_FUNC() rate limit
objtool: Update documentation
objtool: Improve __noreturn annotation warning
objtool: Fix error handling inconsistencies in check()
x86/traps: Make exc_double_fault() consistently noreturn
LoongArch: Enable jump table for objtool
objtool/LoongArch: Add support for goto table
objtool/LoongArch: Add support for switch table
objtool: Handle PC relative relocation type
objtool: Handle different entry size of rodata
...
- loadpin: remove unsupported MODULE_COMPRESS_NONE (Arulpandiyan Vadivel)
- samples/check-exec: Fix script name (Mickaël Salaün)
- yama: remove needless locking in yama_task_prctl() (Oleg Nesterov)
- lib/string_choices: Sort by function name (R Sundar)
- hardening: Allow default HARDENED_USERCOPY to be set at compile time
(Mel Gorman)
- uaccess: Split out compile-time checks into ucopysize.h
- kbuild: clang: Support building UM with SUBARCH=i386
- x86: Enable i386 FORTIFY_SOURCE on Clang 16+
- ubsan/overflow: Rework integer overflow sanitizer option
- Add missing __nonstring annotations for callers of memtostr*()/strtomem*()
- Add __must_be_noncstr() and have memtostr*()/strtomem*() check for it
- Introduce __nonstring_array for silencing future GCC 15 warnings
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRSPkdeREjth1dHnSE2KwveOeQkuwUCZ9hGrgAKCRA2KwveOeQk
u1WvAQC3ZxFu3b0Omfmht2pPqCltf2UOQNvUx3egjoeXpUaNSgD+Lxr/T4xksy7E
jHh7rCYDkruOWs3DHA5JjRQcf0BBLQo=
=FTQp
-----END PGP SIGNATURE-----
Merge tag 'hardening-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"As usual, it's scattered changes all over. Patches touching things
outside of our traditional areas in the tree have been Acked by
maintainers or were trivial changes:
- loadpin: remove unsupported MODULE_COMPRESS_NONE (Arulpandiyan
Vadivel)
- samples/check-exec: Fix script name (Mickaël Salaün)
- yama: remove needless locking in yama_task_prctl() (Oleg Nesterov)
- lib/string_choices: Sort by function name (R Sundar)
- hardening: Allow default HARDENED_USERCOPY to be set at compile
time (Mel Gorman)
- uaccess: Split out compile-time checks into ucopysize.h
- kbuild: clang: Support building UM with SUBARCH=i386
- x86: Enable i386 FORTIFY_SOURCE on Clang 16+
- ubsan/overflow: Rework integer overflow sanitizer option
- Add missing __nonstring annotations for callers of
memtostr*()/strtomem*()
- Add __must_be_noncstr() and have memtostr*()/strtomem*() check for
it
- Introduce __nonstring_array for silencing future GCC 15 warnings"
* tag 'hardening-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (26 commits)
compiler_types: Introduce __nonstring_array
hardening: Enable i386 FORTIFY_SOURCE on Clang 16+
x86/build: Remove -ffreestanding on i386 with GCC
ubsan/overflow: Enable ignorelist parsing and add type filter
ubsan/overflow: Enable pattern exclusions
ubsan/overflow: Rework integer overflow sanitizer option to turn on everything
samples/check-exec: Fix script name
yama: don't abuse rcu_read_lock/get_task_struct in yama_task_prctl()
kbuild: clang: Support building UM with SUBARCH=i386
loadpin: remove MODULE_COMPRESS_NONE as it is no longer supported
lib/string_choices: Rearrange functions in sorted order
string.h: Validate memtostr*()/strtomem*() arguments more carefully
compiler.h: Introduce __must_be_noncstr()
nilfs2: Mark on-disk strings as nonstring
uapi: stddef.h: Introduce __kernel_nonstring
x86/tdx: Mark message.bytes as nonstring
string: kunit: Mark nonstring test strings as __nonstring
scsi: qla2xxx: Mark device strings as nonstring
scsi: mpt3sas: Mark device strings as nonstring
scsi: mpi3mr: Mark device strings as nonstring
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZ90qAwAKCRCRxhvAZXjc
on7lAP0akpIsJMWREg9tLwTNTySI1b82uKec0EAgM6T7n/PYhAD/T4zoY8UYU0Pr
qCxwTXHUVT6bkNhjREBkfqq9OkPP8w8=
=GxeN
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.15-rc1.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs mount updates from Christian Brauner:
- Mount notifications
The day has come where we finally provide a new api to listen for
mount topology changes outside of /proc/<pid>/mountinfo. A mount
namespace file descriptor can be supplied and registered with
fanotify to listen for mount topology changes.
Currently notifications for mount, umount and moving mounts are
generated. The generated notification record contains the unique
mount id of the mount.
The listmount() and statmount() api can be used to query detailed
information about the mount using the received unique mount id.
This allows userspace to figure out exactly how the mount topology
changed without having to generating diffs of /proc/<pid>/mountinfo
in userspace.
- Support O_PATH file descriptors with FSCONFIG_SET_FD in the new mount
api
- Support detached mounts in overlayfs
Since last cycle we support specifying overlayfs layers via file
descriptors. However, we don't allow detached mounts which means
userspace cannot user file descriptors received via
open_tree(OPEN_TREE_CLONE) and fsmount() directly. They have to
attach them to a mount namespace via move_mount() first.
This is cumbersome and means they have to undo mounts via umount().
Allow them to directly use detached mounts.
- Allow to retrieve idmappings with statmount
Currently it isn't possible to figure out what idmapping has been
attached to an idmapped mount. Add an extension to statmount() which
allows to read the idmapping from the mount.
- Allow creating idmapped mounts from mounts that are already idmapped
So far it isn't possible to allow the creation of idmapped mounts
from already idmapped mounts as this has significant lifetime
implications. Make the creation of idmapped mounts atomic by allow to
pass struct mount_attr together with the open_tree_attr() system call
allowing to solve these issues without complicating VFS lookup in any
way.
The system call has in general the benefit that creating a detached
mount and applying mount attributes to it becomes an atomic operation
for userspace.
- Add a way to query statmount() for supported options
Allow userspace to query which mount information can be retrieved
through statmount().
- Allow superblock owners to force unmount
* tag 'vfs-6.15-rc1.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (21 commits)
umount: Allow superblock owners to force umount
selftests: add tests for mount notification
selinux: add FILE__WATCH_MOUNTNS
samples/vfs: fix printf format string for size_t
fs: allow changing idmappings
fs: add kflags member to struct mount_kattr
fs: add open_tree_attr()
fs: add copy_mount_setattr() helper
fs: add vfs_open_tree() helper
statmount: add a new supported_mask field
samples/vfs: add STATMOUNT_MNT_{G,U}IDMAP
selftests: add tests for using detached mount with overlayfs
samples/vfs: check whether flag was raised
statmount: allow to retrieve idmappings
uidgid: add map_id_range_up()
fs: allow detached mounts in clone_private_mount()
selftests/overlayfs: test specifying layers as O_PATH file descriptors
fs: support O_PATH fds with FSCONFIG_SET_FD
vfs: add notifications for mount attach and detach
fanotify: notify on mount attach and detach
...
Merge cpufreq updates for 6.15-rc1:
- Manage sysfs attributes and boost frequencies efficiently from
cpufreq core to reduce boilerplate code from drivers (Viresh Kumar).
- Minor cleanups to cpufreq drivers (Aaron Kling, Benjamin Schneider,
Dhananjay Ugwekar, Imran Shaik, and zuoqian).
- Migrate some cpufreq drivers to using for_each_present_cpu() (Jacky
Bai).
- cpufreq-qcom-hw DT binding fixes (Krzysztof Kozlowski).
- Use str_enable_disable() helper in cpufreq_online() (Lifeng Zheng).
- Optimize the amd-pstate driver to avoid cases where call paths end
up calling the same writes multiple times and needlessly caching
variables through code reorganization, locking overhaul and tracing
adjustments (Mario Limonciello, Dhananjay Ugwekar).
- Make it possible to avoid enabling capacity-aware scheduling (CAS) in
the intel_pstate driver and relocate a check for out-of-band (OOB)
platform handling in it to make it detect OOB before checking HWP
availability (Rafael Wysocki).
- Fix dbs_update() to avoid inadvertent conversions of negative integer
values to unsigned int which causes CPU frequency selection to be
inaccurate in some cases when the "conservative" cpufreq governor is
in use (Jie Zhan).
* pm-cpufreq: (91 commits)
dt-bindings: cpufreq: cpufreq-qcom-hw: Narrow properties on SDX75, SA8775p and SM8650
dt-bindings: cpufreq: cpufreq-qcom-hw: Drop redundant minItems:1
dt-bindings: cpufreq: cpufreq-qcom-hw: Add missing constraint for interrupt-names
dt-bindings: cpufreq: cpufreq-qcom-hw: Add QCS8300 compatible
cpufreq: Init cpufreq only for present CPUs
cpufreq: tegra186: Share policy per cluster
cpufreq/amd-pstate: Drop actions in amd_pstate_epp_cpu_offline()
cpufreq/amd-pstate: Stop caching EPP
cpufreq/amd-pstate: Rework CPPC enabling
cpufreq/amd-pstate: Drop debug statements for policy setting
cpufreq/amd-pstate: Update cppc_req_cached for shared mem EPP writes
cpufreq/amd-pstate: Move all EPP tracing into *_update_perf and *_set_epp functions
cpufreq/amd-pstate: Cache CPPC request in shared mem case too
cpufreq/amd-pstate: Replace all AMD_CPPC_* macros with masks
cpufreq/amd-pstate-ut: Adjust variable scope
cpufreq/amd-pstate-ut: Run on all of the correct CPUs
cpufreq/amd-pstate-ut: Drop SUCCESS and FAIL enums
cpufreq/amd-pstate-ut: Allow lowest nonlinear and lowest to be the same
cpufreq/amd-pstate-ut: Use _free macro to free put policy
cpufreq/amd-pstate: Drop `cppc_cap1_cached`
...
Merge an ACPI CPPC update, ACPI platform-profile driver updates, an ACPI
APEI update and a MAINTAINERS update related to ACPI for 6.15-rc1:
- Add a missing header file include to the x86 arch CPPC code (Mario
Limonciello).
- Rework the sysfs attributes implementation in the ACPI platform-profile
driver and improve the unregistration code in it (Nathan Chancellor,
Kurt Borja).
- Prevent the ACPI HED driver from being built as a module and change
its initcall level to subsys_initcall to avoid initialization ordering
issues related to it (Xiaofei Tan).
- Update a maintainer email address in the ACPI PMIC entry in
MAINTAINERS (Mika Westerberg).
* acpi-x86:
x86/ACPI: CPPC: Add missing include
* acpi-platform-profile:
ACPI: platform_profile: Improve platform_profile_unregister()
ACPI: platform-profile: Fix CFI violation when accessing sysfs files
* acpi-apei:
ACPI: HED: Always initialize before evged
* acpi-misc:
MAINTAINERS: Use my kernel.org address for ACPI PMIC work
The toplevel Makefile already provides -fmacro-prefix-map as part of
KBUILD_CPPFLAGS. In contrast to the KBUILD_CFLAGS and KBUILD_AFLAGS
variables, KBUILD_CPPFLAGS is not redefined in the architecture specific
Makefiles. Therefore the toplevel KBUILD_CPPFLAGS do apply just fine, to
both C and ASM sources.
The custom configuration was necessary when it was added in
commit 9e2276fa6e ("arch/x86/boot: Use prefix map to avoid embedded
paths") but has since become unnecessary in commit a716bd7432
("kbuild: use -fmacro-prefix-map for .S sources").
Drop the now unnecessary custom prefix map configuration.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
CONFIG_TRACE_BRANCH_PROFILING inserts a call to ftrace_likely_update()
for each use of likely() or unlikely(). That breaks noinstr rules if
the affected function is annotated as noinstr.
Disable branch profiling for files with noinstr functions. In addition
to some individual files, this also includes the entire arch/x86
subtree, as well as the kernel/entry, drivers/cpuidle, and drivers/idle
directories, all of which are noinstr-heavy.
Due to the nature of how sched binaries are built by combining multiple
.c files into one, branch profiling is disabled more broadly across the
sched code than would otherwise be needed.
This fixes many warnings like the following:
vmlinux.o: warning: objtool: do_syscall_64+0x40: call to ftrace_likely_update() leaves .noinstr.text section
vmlinux.o: warning: objtool: __rdgsbase_inactive+0x33: call to ftrace_likely_update() leaves .noinstr.text section
vmlinux.o: warning: objtool: handle_bug.isra.0+0x198: call to ftrace_likely_update() leaves .noinstr.text section
...
Reported-by: Ingo Molnar <mingo@kernel.org>
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/fb94fc9303d48a5ed370498f54500cc4c338eb6d.1742586676.git.jpoimboe@kernel.org
Commit:
010c4a461c ("x86/speculation: Simplify and make CALL_NOSPEC consistent")
added an #ifdef CONFIG_MITIGATION_RETPOLINE around the CALL_NOSPEC definition.
This is not required as this code is already under a larger #ifdef.
Remove the extra #ifdef, no functional change.
vmlinux size remains same before and after this change:
CONFIG_MITIGATION_RETPOLINE=y:
text data bss dec hex filename
25434752 7342290 2301212 35078254 217406e vmlinux.before
25434752 7342290 2301212 35078254 217406e vmlinux.after
# CONFIG_MITIGATION_RETPOLINE is not set:
text data bss dec hex filename
22943094 6214994 1550152 30708240 1d49210 vmlinux.before
22943094 6214994 1550152 30708240 1d49210 vmlinux.after
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20250320-call-nospec-extra-ifdef-v1-1-d9b084d24820@linux.intel.com
Although IBS "swfilt" can prevent leaking samples with kernel RIP to the
userspace, there are few subtle cases where a 'data' address and/or a
'branch target' address can fall under kernel address range although RIP
is from userspace. Prevent leaking kernel 'data' addresses by discarding
such samples when {exclude_kernel=1,swfilt=1}.
IBS can now be invoked by unprivileged user with the introduction of
"swfilt". However, this creates a loophole in the interface where an
unprivileged user can get physical address of the userspace virtual
addresses through IBS register raw dump (PERF_SAMPLE_RAW). Prevent this
as well.
This upstream commit fixed the most obvious leak:
65a99264f5 perf/x86: Check data address for IBS software filter
Follow that up with a more complete fix.
Fixes: d29e744c71 ("perf/x86: Relax privilege filter restriction on AMD IBS")
Suggested-by: Matteo Rizzo <matteorizzo@google.com>
Co-developed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250321161251.1033-1-ravi.bangoria@amd.com
I wonder how many people were checking their glibc version when
considering whether to enable this option.
Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250321-x86_x2apic-v3-7-b0cbaa6fa338@ixit.cz
I was unable to find a good description of the ServerWorks CNB20LE
chipset. However, it was probably exclusively used with the Pentium III
processor (this CPU model was used in all references to it that I
found where the CPU model was provided: dmesgs in [1] and [2];
[3] page 2; [4]-[7]).
As is widely known, the Pentium III processor did not support the 64-bit
mode, support for which was introduced by Intel a couple of years later.
So it is safe to assume that no systems with the CNB20LE chipset have
amd64 and the CONFIG_PCI_CNB20LE_QUIRK may now depend on X86_32.
Additionally, I have determined that most computers with the CNB20LE
chipset did have ACPI support and this driver was inactive on them.
I have submitted a patch to remove this driver, but it was met with
resistance [8].
[1] Jim Studt, Re: Problem with ServerWorks CNB20LE and lost interrupts
Linux Kernel Mailing List, https://lkml.org/lkml/2002/1/11/111
[2] RedHat Bug 665109 - e100 problems on old Compaq Proliant DL320
https://bugzilla.redhat.com/show_bug.cgi?id=665109
[3] R. Hughes-Jones, S. Dallison, G. Fairey, Performance Measurements on
Gigabit Ethernet NICs and Server Quality Motherboards,
http://datatag.web.cern.ch/papers/pfldnet2003-rhj.doc
[4] "Hardware for Linux",
Probe #d6b5151873 of Intel STL2-bd A28808-302 Desktop Computer (STL2)
https://linux-hardware.org/?probe=d6b5151873
[5] "Hardware for Linux", Probe #0b5d843f10 of Compaq ProLiant DL380
https://linux-hardware.org/?probe=0b5d843f10
[6] Ubuntu Forums, Dell Poweredge 2400 - Adaptec SCSI Bus AIC-7880
https://ubuntuforums.org/showthread.php?t=1689552
[7] Ira W. Snyder, "BISECTED: 2.6.35 (and -git) fail to boot: APIC problems"
https://lkml.org/lkml/2010/8/13/220
[8] Bjorn Helgaas, "Re: [PATCH] x86/pci: drop ServerWorks / Broadcom
CNB20LE PCI host bridge driver"
https://lore.kernel.org/lkml/20220318165535.GA840063@bhelgaas/T/
Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Signed-off-by: David Heideberg <david@ixit.cz>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250321-x86_x2apic-v3-6-b0cbaa6fa338@ixit.cz
This configuration option had no help text, so add it.
CONFIG_EXPERT is enabled on some distribution kernels, so people using a
distribution kernel's configuration as a starting point will see this
option.
[ mingo: Standardized the new Kconfig text a bit. ]
Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Signed-off-by: David Heideberg <david@ixit.cz>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250321-x86_x2apic-v3-5-b0cbaa6fa338@ixit.cz
The order of the entries matches the order they appear in Kconfig.
In 2011, AMD Elan was moved to Kconfig.cpu and the dependency on
X86_EXTENDED_PLATFORM was dropped in:
ce9c99af8d ("x86, cpu: Move AMD Elan Kconfig under "Processor family"")
Support for Moorestown MID devices was removed in 2012 in:
1a8359e411 ("x86/mid: Remove Intel Moorestown")
SGI 320/540 (Visual Workstation) was removed in 2014 in:
c5f9ee3d66 ("x86, platforms: Remove SGI Visual Workstation")
Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Signed-off-by: David Heideberg <david@ixit.cz>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250321-x86_x2apic-v3-4-b0cbaa6fa338@ixit.cz
So that these options will be displayed together in menuconfig etc.
Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250321-x86_x2apic-v3-3-b0cbaa6fa338@ixit.cz
It appears that (X86_64 || X86_32) is always true on x86.
This logical OR directive was introduced in:
6ea3038648 ("arch/x86: remove depends on CONFIG_EXPERIMENTAL")
By (EXPERIMENTAL && X86_32) turning into (X86_32). Since
this change was an identity transformation, nobody noticed
that the condition turned into 'true'.
[ mingo: Updated changelog ]
Fixes: 6ea3038648 ("arch/x86: remove depends on CONFIG_EXPERIMENTAL")
Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Signed-off-by: David Heideberg <david@ixit.cz>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250321-x86_x2apic-v3-2-b0cbaa6fa338@ixit.cz
As many current platforms (most modern Intel CPUs and QEMU) have x2APIC
present, enable CONFIG_X86_X2APIC by default as it gives performance
and functionality benefits. Additionally, if the BIOS has already
switched APIC to x2APIC mode, but CONFIG_X86_X2APIC is disabled, the
kernel will panic in arch/x86/kernel/apic/apic.c .
Also improve the help text, which was confusing and really did not
describe what the feature is about.
Help text references and discussion:
Both Intel [1] and AMD [3] spell the name as "x2APIC", not "x2apic".
"It allows faster access to the local APIC"
[2], chapter 2.1, page 15:
"More efficient MSR interface to access APIC registers."
"x2APIC was introduced in Intel CPUs around 2008":
I was unable to find specific information which Intel CPUs
support x2APIC. Wikipedia claims it was "introduced with the
Nehalem microarchitecture in November 2008", but I was not able
to confirm this independently. At least some Nehalem CPUs do not
support x2APIC [1].
The documentation [2] is dated June 2008. Linux kernel also
introduced x2APIC support in 2008, so the year seems to be
right.
"and in AMD EPYC CPUs in 2019":
[3], page 15:
"AMD introduced an x2APIC in our EPYC 7002 Series processors for
the first time."
"It is also frequently emulated in virtual machines, even when the host
CPU does not support it."
[1]
"If this configuration option is disabled, the kernel will not boot on
some platforms that have x2APIC enabled."
According to some BIOS documentation [4], the x2APIC may be
"disabled", "enabled", or "force enabled" on this system.
I think that "enabled" means "made available to the operating
system, but not already turned on" and "force enabled" means
"already switched to x2APIC mode when the OS boots". Only in the
latter mode a kernel without CONFIG_X86_X2APIC will panic in
validate_x2apic() in arch/x86/kernel/apic/apic.c .
QEMU 4.2.1 and my Intel HP laptop (bought in 2019) use the
"enabled" mode and the kernel does not panic.
[1] "Re: [Qemu-devel] [Question] why x2apic's set by default without host sup"
https://lists.gnu.org/archive/html/qemu-devel/2013-07/msg03527.html
[2] Intel® 64 Architecture x2APIC Specification,
( https://www.naic.edu/~phil/software/intel/318148.pdf )
[3] Workload Tuning Guide for AMD EPYC ™ 7002 Series Processor Based
Servers Application Note,
https://developer.amd.com/wp-content/resources/56745_0.80.pdf
[4] UEFI System Utilities and Shell Command Mobile Help for HPE ProLiant
Gen10, ProLiant Gen10 Plus Servers and HPE Synergy:
Enabling or disabling Processor x2APIC Support
https://techlibrary.hpe.com/docs/iss/proliant-gen10-uefi/s_enable_disable_x2APIC_support.html
Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250321-x86_x2apic-v3-1-b0cbaa6fa338@ixit.cz
Current code varies in how the size of the variable size input header
for hypercalls is calculated when the input contains struct hv_vpset.
Surprisingly, this variation is correct, as different hypercalls make
different choices for what portion of struct hv_vpset is treated as part
of the variable size input header. The Hyper-V TLFS is silent on these
details, but the behavior has been confirmed with Hyper-V developers.
To avoid future confusion about these differences, add comments to
struct hv_vpset, and to hypercall call sites with input that contains
a struct hv_vpset. The comments describe the overall situation and
the calculation that should be used at each particular call site.
No functional change as only comments are updated.
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/20250318214919.958953-1-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20250318214919.958953-1-mhklinux@outlook.com>
All implementations of chacha_init_arch() just call
chacha_init_generic(), so it is pointless. Just delete it, and replace
chacha_init() with what was previously chacha_init_generic().
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Setting pci_msi_ignore_mask inhibits the toggling of the mask bit for both
MSI and MSI-X entries globally, regardless of the IRQ chip they are using.
Only Xen sets the pci_msi_ignore_mask when routing physical interrupts over
event channels, to prevent PCI code from attempting to toggle the maskbit,
as it's Xen that controls the bit.
However, the pci_msi_ignore_mask being global will affect devices that use
MSI interrupts but are not routing those interrupts over event channels
(not using the Xen pIRQ chip). One example is devices behind a VMD PCI
bridge. In that scenario the VMD bridge configures MSI(-X) using the
normal IRQ chip (the pIRQ one in the Xen case), and devices behind the
bridge configure the MSI entries using indexes into the VMD bridge MSI
table. The VMD bridge then demultiplexes such interrupts and delivers to
the destination device(s). Having pci_msi_ignore_mask set in that scenario
prevents (un)masking of MSI entries for devices behind the VMD bridge.
Move the signaling of no entry masking into the MSI domain flags, as that
allows setting it on a per-domain basis. Set it for the Xen MSI domain
that uses the pIRQ chip, while leaving it unset for the rest of the
cases.
Remove pci_msi_ignore_mask at once, since it was only used by Xen code, and
with Xen dropping usage the variable is unneeded.
This fixes using devices behind a VMD bridge on Xen PV hardware domains.
Albeit Devices behind a VMD bridge are not known to Xen, that doesn't mean
Linux cannot use them. By inhibiting the usage of
VMD_FEAT_CAN_BYPASS_MSI_REMAP and the removal of the pci_msi_ignore_mask
bodge devices behind a VMD bridge do work fine when use from a Linux Xen
hardware domain. That's the whole point of the series.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Juergen Gross <jgross@suse.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Message-ID: <20250219092059.90850-4-roger.pau@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Clang does not tolerate the use of non-TLS symbols for the per-CPU stack
protector very well, and to work around this limitation, the symbol
passed via the -mstack-protector-guard-symbol= option is never defined
in C code, but only in the linker script, and it is exported from an
assembly file. This is necessary because Clang will fail to generate the
correct %GS based references in a compilation unit that includes a
non-TLS definition of the guard symbol being used to store the stack
cookie.
This problem is only triggered by symbol definitions, not by
declarations, but nonetheless, the declaration in <asm/asm-prototypes.h>
is conditional on __GENKSYMS__ being #define'd, so that only genksyms
will observe it, but for ordinary compilation, it will be invisible.
This is causing problems with the genksyms alternative gendwarfksyms,
which does not #define __GENKSYMS__, does not observe the symbol
declaration, and therefore lacks the information it needs to version it.
Adding the #define creates problems in other places, so that is not a
straight-forward solution. So take the easy way out, and drop the
conditional on __GENKSYMS__, as this is not really needed to begin with.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20250320213238.4451-2-ardb@kernel.org
Add mshv_handler() to process messages related to managing guest
partitions such as intercepts, doorbells, and scheduling messages.
In a (non-nested) root partition, the same interrupt vector is shared
between the vmbus and mshv_root drivers.
Introduce a stub for mshv_handler() and call it in
sysvec_hyperv_callback alongside vmbus_handler().
Even though both handlers will be called for every Hyper-V interrupt,
the messages for each driver are delivered to different offsets
within the SYNIC message page, so they won't step on each other.
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Wei Liu <wei.liu@kernel.org>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Reviewed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Link: https://lore.kernel.org/r/1741980536-3865-9-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1741980536-3865-9-git-send-email-nunodasneves@linux.microsoft.com>
hv_get_hypervisor_version(), hv_call_deposit_pages(), and
hv_call_create_vp(), are all needed in-module with CONFIG_MSHV_ROOT=m.
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Stanislav Kinsburskii <skinsburskii@microsoft.linux.com>
Reviewed-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Link: https://lore.kernel.org/r/1741980536-3865-7-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1741980536-3865-7-git-send-email-nunodasneves@linux.microsoft.com>
Extend the "ms_hyperv_info" structure to include a new field,
"ext_features", for capturing extended Hyper-V features.
Update the "ms_hyperv_init_platform" function to retrieve these features
using the cpuid instruction and include them in the informational output.
Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Reviewed-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/1741980536-3865-3-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1741980536-3865-3-git-send-email-nunodasneves@linux.microsoft.com>
Introduce hv_status_printk() macros as a convenience to log hypercall
errors, formatting them with the status code (HV_STATUS_*) as a raw hex
value and also as a string, which saves some time while debugging.
Create a table of HV_STATUS_ codes with strings and mapped errnos, and
use it for hv_result_to_string() and hv_result_to_errno().
Use the new hv_status_printk()s in hv_proc.c, hyperv-iommu.c, and
irqdomain.c hypercalls to aid debugging in the root partition.
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Link: https://lore.kernel.org/r/1741980536-3865-2-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1741980536-3865-2-git-send-email-nunodasneves@linux.microsoft.com>
snp_set_vmsa() returns 0 as success result and so fix it.
Cc: stable@vger.kernel.org
Fixes: 44676bb9d5 ("x86/hyperv: Add smp support for SEV-SNP guest")
Signed-off-by: Tianyu Lan <tiala@microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/20250313085217.45483-1-ltykernel@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20250313085217.45483-1-ltykernel@gmail.com>
The kernel runs as a firmware in the VTL mode, and the only way
to restart in the VTL mode on x86 is to triple fault. Thus, one
has to always supply "reboot=t" on the kernel command line in the
VTL mode, and missing that renders rebooting not working.
Define the machine restart callback to always use the triple
fault to provide the robust configuration by default.
Signed-off-by: Roman Kisel <romank@linux.microsoft.com>
Link: https://lore.kernel.org/r/20250227214728.15672-3-romank@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20250227214728.15672-3-romank@linux.microsoft.com>
By default, X86(-64) systems use the emergecy restart routine
in the course of which the code unconditionally writes to
the physical address of 0x472 to indicate the boot mode
to the firmware (BIOS or UEFI).
When the kernel itself runs as a firmware in the VTL mode,
that write corrupts the memory of the guest upon emergency
restarting. Preserving the state intact in that situation
is important for debugging, at least.
Define the specialized machine callback to avoid that write
and use the triple fault to perform emergency restart.
Signed-off-by: Roman Kisel <romank@linux.microsoft.com>
Link: https://lore.kernel.org/r/20250227214728.15672-2-romank@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20250227214728.15672-2-romank@linux.microsoft.com>
If init_rapl_pmu() fails while allocating memory for "rapl_pmu" objects,
we miss freeing the "rapl_pmus" object in the error path. Fix that.
Fixes: 9b99d65c0b ("perf/x86/rapl: Move the pmu allocation out of CPU hotplug")
Signed-off-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250320100617.4480-1-dhananjay.ugwekar@amd.com
- Add common secure TSC infrastructure for use within SNP and in the
future TDX
- Block KVM_CAP_SYNC_REGS if guest state is protected. It does not make
sense to use the capability if the relevant registers are not
available for reading or writing.
The immediate issue being fixed here is a nVMX bug where KVM fails to
detect that, after nested VM-Exit, L1 has a pending IRQ (or NMI).
However, checking for a pending interrupt accesses the legacy PIC, and
x86's kvm_arch_destroy_vm() currently frees the PIC before destroying
vCPUs, i.e. checking for IRQs during the forced nested VM-Exit results
in a NULL pointer deref; that's a prerequisite for the nVMX fix.
The remaining patches attempt to bring a bit of sanity to x86's VM
teardown code, which has accumulated a lot of cruft over the years. E.g.
KVM currently unloads each vCPU's MMUs in a separate operation from
destroying vCPUs, all because when guest SMP support was added, KVM had a
kludgy MMU teardown flow that broke when a VM had more than one 1 vCPU.
And that oddity lived on, for 18 years...
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Track whether pages were unmapped from any MM (even ones with a currently
empty mm_cpumask) by the reclaim code, to figure out whether or not
broadcast TLB flush should be done when reclaim finishes.
The reason any MM must be tracked, and not only ones contributing to the
tlbbatch cpumask, is that broadcast ASIDs are expected to be kept up to
date even on CPUs where the MM is not currently active.
This change allows reclaim to avoid doing TLB flushes when only clean page
cache pages and/or slab memory were reclaimed, which is fairly common.
( This is a simpler alternative to the code that was in my INVLPGB series
before, and it seems to capture most of the benefit due to how common
it is to reclaim only page cache. )
Signed-off-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250319132520.6b10ad90@fangorn
Introduce a name for an old Pentium 4 model and replace the x86_model
checks with VFM ones. This gets rid of one of the last remaining
Intel-specific x86_model checks.
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250318223828.2945651-3-sohil.mehta@intel.com
Architectural Perfmon was introduced on the Family 6 "Core" processors
starting with Yonah. Processors before Yonah need their own customized
PMU initialization.
p6_pmu_init() is expected to provide that initialization for early
Family 6 processors. But, currently, it could get called for any Family
6 processor if the architectural perfmon feature is disabled on that
processor. To simplify, restrict the P6 PMU initialization to early
Family 6 processors that do not have architectural perfmon support and
truly need the special handling.
As a result, the "unsupported" console print becomes practically
unreachable because all the released P6 processors are covered by the
switch cases. Move the console print to a common location where it can
cover all modern processors (including Family >15) that may not have
architectural perfmon support enumerated.
Also, use this opportunity to get rid of the unnecessary switch cases in
P6 initialization. Only the Pentium Pro processor needs a quirk, and the
rest of the processors do not need any special handling. The gaps in the
case numbers are only due to no processor with those model numbers being
released.
Use decimal numbers to represent Intel Family numbers. Also, convert one
of the last few Intel x86_model comparisons to a VFM-based one.
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250318223828.2945651-2-sohil.mehta@intel.com
Intel made a late change to the AVX10 specification that removes support
for a 256-bit maximum vector length and enumeration of the maximum
vector length. AVX10 will imply a maximum vector length of 512 bits.
I.e. there won't be any such thing as AVX10/256 or AVX10/512; there will
just be AVX10, and it will essentially just consolidate AVX512 features.
As a result of this new development, my strategy of providing both
*_avx10_256 and *_avx10_512 functions didn't turn out to be that useful.
The only remaining motivation for the 256-bit AVX512 / AVX10 functions
is to avoid downclocking on older Intel CPUs. But I already wrote
*_avx2 code too (primarily to support CPUs without AVX512), which
performs almost as well as *_avx10_256. So we should just use that.
Therefore, remove the *_avx10_256 CRC functions, and rename the
*_avx10_512 CRC functions to *_avx512. Make Ice Lake and Tiger Lake use
the *_avx2 functions instead of *_avx10_256 which they previously used.
Link: https://lore.kernel.org/r/20250319181316.91271-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
We ripped out PV and virtualization related bits from rqspinlock in an
earlier commit, however, a fair lock performs poorly within a virtual
machine when the lock holder is preempted. As such, retain the
virt_spin_lock fallback to test and set lock, but with timeout and
deadlock detection. We can do this by simply depending on the
resilient_tas_spin_lock implementation from the previous patch.
We don't integrate support for CONFIG_PARAVIRT_SPINLOCKS yet, as that
requires more involved algorithmic changes and introduces more
complexity. It can be done when the need arises in the future.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250316040541.108729-15-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
- Don't write to the Xen hypercall page on MSR writes that are initiated by
the host (userspace or KVM) to fix a class of bugs where KVM can write to
guest memory at unexpected times, e.g. during vCPU creation if userspace has
set the Xen hypercall MSR index to collide with an MSR that KVM emulates.
- Restrict the Xen hypercall MSR indx to the unofficial synthetic range to
reduce the set of possible collisions with MSRs that are emulated by KVM
(collisions can still happen as KVM emulates Hyper-V MSRs, which also reside
in the synthetic range).
- Clean up and optimize KVM's handling of Xen MSR writes and xen_hvm_config.
- Update Xen TSC leaves during CPUID emulation instead of modifying the CPUID
entries when updating PV clocks, as there is no guarantee PV clocks will be
updated between TSC frequency changes and CPUID emulation, and guest reads
of Xen TSC should be rare, i.e. are not a hot path.
-----BEGIN PGP SIGNATURE-----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=c3Wt
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-xen-6.15' of https://github.com/kvm-x86/linux into HEAD
KVM Xen changes for 6.15
- Don't write to the Xen hypercall page on MSR writes that are initiated by
the host (userspace or KVM) to fix a class of bugs where KVM can write to
guest memory at unexpected times, e.g. during vCPU creation if userspace has
set the Xen hypercall MSR index to collide with an MSR that KVM emulates.
- Restrict the Xen hypercall MSR indx to the unofficial synthetic range to
reduce the set of possible collisions with MSRs that are emulated by KVM
(collisions can still happen as KVM emulates Hyper-V MSRs, which also reside
in the synthetic range).
- Clean up and optimize KVM's handling of Xen MSR writes and xen_hvm_config.
- Update Xen TSC leaves during CPUID emulation instead of modifying the CPUID
entries when updating PV clocks, as there is no guarantee PV clocks will be
updated between TSC frequency changes and CPUID emulation, and guest reads
of Xen TSC should be rare, i.e. are not a hot path.
- Don't take kvm->lock when iterating over vCPUs in the suspend notifier to
fix a largely theoretical deadlock.
- Use the vCPU's actual Xen PV clock information when starting the Xen timer,
as the cached state in arch.hv_clock can be stale/bogus.
- Fix a bug where KVM could bleed PVCLOCK_GUEST_STOPPED across different
PV clocks.
- Restrict PVCLOCK_GUEST_STOPPED to kvmclock, as KVM's suspend notifier only
accounts for kvmclock, and there's no evidence that the flag is actually
supported by Xen guests.
- Clean up the per-vCPU "cache" of its reference pvclock, and instead only
track the vCPU's TSC scaling (multipler+shift) metadata (which is moderately
expensive to compute, and rarely changes for modern setups).
-----BEGIN PGP SIGNATURE-----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=yv8C
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-pvclock-6.15' of https://github.com/kvm-x86/linux into HEAD
KVM PV clock changes for 6.15:
- Don't take kvm->lock when iterating over vCPUs in the suspend notifier to
fix a largely theoretical deadlock.
- Use the vCPU's actual Xen PV clock information when starting the Xen timer,
as the cached state in arch.hv_clock can be stale/bogus.
- Fix a bug where KVM could bleed PVCLOCK_GUEST_STOPPED across different
PV clocks.
- Restrict PVCLOCK_GUEST_STOPPED to kvmclock, as KVM's suspend notifier only
accounts for kvmclock, and there's no evidence that the flag is actually
supported by Xen guests.
- Clean up the per-vCPU "cache" of its reference pvclock, and instead only
track the vCPU's TSC scaling (multipler+shift) metadata (which is moderately
expensive to compute, and rarely changes for modern setups).
- Ensure the PSP driver is initialized when both the PSP and KVM modules are
built-in (the initcall framework doesn't handle dependencies).
- Use long-term pins when registering encrypted memory regions, so that the
pages are migrated out of MIGRATE_CMA/ZONE_MOVABLE and don't lead to
excessive fragmentation.
- Add macros and helpers for setting GHCB return/error codes.
- Add support for Idle HLT interception, which elides interception if the vCPU
has a pending, unmasked virtual IRQ when HLT is executed.
- Fix a bug in INVPCID emulation where KVM fails to check for a non-canonical
address.
- Don't attempt VMRUN for SEV-ES+ guests if the vCPU's VMSA is invalid, e.g.
because the vCPU was "destroyed" via SNP's AP Creation hypercall.
- Reject SNP AP Creation if the requested SEV features for the vCPU don't
match the VM's configured set of features.
- Misc cleanups
-----BEGIN PGP SIGNATURE-----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=iZrd
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-svm-6.15' of https://github.com/kvm-x86/linux into HEAD
KVM SVM changes for 6.15
- Ensure the PSP driver is initialized when both the PSP and KVM modules are
built-in (the initcall framework doesn't handle dependencies).
- Use long-term pins when registering encrypted memory regions, so that the
pages are migrated out of MIGRATE_CMA/ZONE_MOVABLE and don't lead to
excessive fragmentation.
- Add macros and helpers for setting GHCB return/error codes.
- Add support for Idle HLT interception, which elides interception if the vCPU
has a pending, unmasked virtual IRQ when HLT is executed.
- Fix a bug in INVPCID emulation where KVM fails to check for a non-canonical
address.
- Don't attempt VMRUN for SEV-ES+ guests if the vCPU's VMSA is invalid, e.g.
because the vCPU was "destroyed" via SNP's AP Creation hypercall.
- Reject SNP AP Creation if the requested SEV features for the vCPU don't
match the VM's configured set of features.
- Misc cleanups
- Fix a bug where KVM unnecessarily reads XFD_ERR from hardware and thus
modifies the vCPU's XFD_ERR on a #NM due to CR0.TS=1.
- Pass XFD_ERR as a psueo-payload when injecting #NM as a preparatory step
for upcoming FRED virtualization support.
- Decouple the EPT entry RWX protection bit macros from the EPT Violation bits
as a general cleanup, and in anticipation of adding support for emulating
Mode-Based Execution (MBEC).
- Reject KVM_RUN if userspace manages to gain control and stuff invalid guest
state while KVM is in the middle of emulating nested VM-Enter.
- Add a macro to handle KVM's sanity checks on entry/exit VMCS control pairs
in anticipation of adding sanity checks for secondary exit controls (the
primary field is out of bits).
-----BEGIN PGP SIGNATURE-----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=SAgZ
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-vmx-6.15' of https://github.com/kvm-x86/linux into HEAD
KVM VMX changes for 6.15
- Fix a bug where KVM unnecessarily reads XFD_ERR from hardware and thus
modifies the vCPU's XFD_ERR on a #NM due to CR0.TS=1.
- Pass XFD_ERR as a psueo-payload when injecting #NM as a preparatory step
for upcoming FRED virtualization support.
- Decouple the EPT entry RWX protection bit macros from the EPT Violation bits
as a general cleanup, and in anticipation of adding support for emulating
Mode-Based Execution (MBEC).
- Reject KVM_RUN if userspace manages to gain control and stuff invalid guest
state while KVM is in the middle of emulating nested VM-Enter.
- Add a macro to handle KVM's sanity checks on entry/exit VMCS control pairs
in anticipation of adding sanity checks for secondary exit controls (the
primary field is out of bits).
- Fix a bug in PIC emulation that caused KVM to emit a spurious KVM_REQ_EVENT.
- Add a helper to consolidate handling of mp_state transitions, and use it to
clear pv_unhalted whenever a vCPU is made RUNNABLE.
- Defer runtime CPUID updates until KVM emulates a CPUID instruction, to
coalesce updates when multiple pieces of vCPU state are changing, e.g. as
part of a nested transition.
- Fix a variety of nested emulation bugs, and add VMX support for synthesizing
nested VM-Exit on interception (instead of injecting #UD into L2).
- Drop "support" for PV Async #PF with proctected guests without SEND_ALWAYS,
as KVM can't get the current CPL.
- Misc cleanups
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEKTobbabEP7vbhhN9OlYIJqCjN/0FAmfZhoYACgkQOlYIJqCj
N/1oSBAAlhsZzv4m6rHtWACjGsSBlAE5WM7HrpnwjOyMW+Desc0WLL4L6qAlxgT7
4ZkBvQ4zsiyUIdLv1XARvkBYHTUkcgG8fQSSJQ6grZit5OcFcMgWafvQrJYI6428
TyzF/x6t0gj8CjDluA6jM/eL5HhWZZDOIg0Wma+pyYpW+7y2tkphXyYyOQPBGwv3
geRUetbDHHXjf042k/8f1j1vjzrNNvAg3YyNyx1YbdU9XKsn5D+SeUW2eVfYk8G7
5QsCOGvUYcbbjrR8kbCZKexvoH6Np9J6YKDe4R9R2yDzgs/96qz6xkYTGCVkHA1y
uursKqRHgbXBxzxa+ban073laT7Qt3S01Gd9bJW3IO7hzG89gl4qfX7fap8T9Yc2
yeBTYIgInpyx+NCdZ2Z/++BzPagBGfa77gFX/eIkmsVA9LWYi9CI3FSjtr/czvWm
a4tfMPvTVBjsBQQ7t/lNksrq0O51lbb3iqqv3ToQpDOOqCWuMEU5xcihhPRr5NSZ
dX4o/jIDhCV8EyXdtASyqMlYBXcuC45ojEZn1elh0QogzYAdSGQ2bIDyxuBtA//k
kSbi+E4GB64jVfBWUyK2QeLOBnBkH7mh6Cg5UYr1Ln9Sm6l8vrcxhcbnchiWxXMI
WCK7BJwI2HojBVpEZ04jMkjHvg36uSfjOzmMLT5yPXfFNebsGmA=
=8SGF
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-misc-6.15' of https://github.com/kvm-x86/linux into HEAD
KVM x86 misc changes for 6.15:
- Fix a bug in PIC emulation that caused KVM to emit a spurious KVM_REQ_EVENT.
- Add a helper to consolidate handling of mp_state transitions, and use it to
clear pv_unhalted whenever a vCPU is made RUNNABLE.
- Defer runtime CPUID updates until KVM emulates a CPUID instruction, to
coalesce updates when multiple pieces of vCPU state are changing, e.g. as
part of a nested transition.
- Fix a variety of nested emulation bugs, and add VMX support for synthesizing
nested VM-Exit on interception (instead of injecting #UD into L2).
- Drop "support" for PV Async #PF with proctected guests without SEND_ALWAYS,
as KVM can't get the current CPL.
- Misc cleanups
Add support for "fast" aging of SPTEs in both the TDP MMU and Shadow MMU, where
"fast" means "without holding mmu_lock". Not taking mmu_lock allows multiple
aging actions to run in parallel, and more importantly avoids stalling vCPUs,
e.g. due to holding mmu_lock for an extended duration while a vCPU is faulting
in memory.
For the TDP MMU, protect aging via RCU; the page tables are RCU-protected and
KVM doesn't need to access any metadata to age SPTEs.
For the Shadow MMU, use bit 1 of rmap pointers (bit 0 is used to terminate a
list of rmaps) to implement a per-rmap single-bit spinlock. When aging a gfn,
acquire the rmap's spinlock with read-only permissions, which allows hardening
and optimizing the locking and aging, e.g. locking an rmap for write requires
mmu_lock to also be held. The lock is NOT a true R/W spinlock, i.e. multiple
concurrent readers aren't supported.
To avoid forcing all SPTE updates to use atomic operations (clearing the
Accessed bit out of mmu_lock makes it inherently volatile), rework and rename
spte_has_volatile_bits() to spte_needs_atomic_update() and deliberately exclude
the Accessed bit. KVM (and mm/) already tolerates false positives/negatives
for Accessed information, and all testing has shown that reducing the latency
of aging is far more beneficial to overall system performance than providing
"perfect" young/old information.
-----BEGIN PGP SIGNATURE-----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=Iy57
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-mmu-6.15' of https://github.com/kvm-x86/linux into HEAD
KVM x86/mmu changes for 6.15
Add support for "fast" aging of SPTEs in both the TDP MMU and Shadow MMU, where
"fast" means "without holding mmu_lock". Not taking mmu_lock allows multiple
aging actions to run in parallel, and more importantly avoids stalling vCPUs,
e.g. due to holding mmu_lock for an extended duration while a vCPU is faulting
in memory.
For the TDP MMU, protect aging via RCU; the page tables are RCU-protected and
KVM doesn't need to access any metadata to age SPTEs.
For the Shadow MMU, use bit 1 of rmap pointers (bit 0 is used to terminate a
list of rmaps) to implement a per-rmap single-bit spinlock. When aging a gfn,
acquire the rmap's spinlock with read-only permissions, which allows hardening
and optimizing the locking and aging, e.g. locking an rmap for write requires
mmu_lock to also be held. The lock is NOT a true R/W spinlock, i.e. multiple
concurrent readers aren't supported.
To avoid forcing all SPTE updates to use atomic operations (clearing the
Accessed bit out of mmu_lock makes it inherently volatile), rework and rename
spte_has_volatile_bits() to spte_needs_atomic_update() and deliberately exclude
the Accessed bit. KVM (and mm/) already tolerates false positives/negatives
for Accessed information, and all testing has shown that reducing the latency
of aging is far more beneficial to overall system performance than providing
"perfect" young/old information.
While the GCC and Clang compilers already define __ASSEMBLER__
automatically when compiling assembly code, __ASSEMBLY__ is a
macro that only gets defined by the Makefiles in the kernel.
This can be very confusing when switching between userspace
and kernelspace coding, or when dealing with UAPI headers that
rather should use __ASSEMBLER__ instead. So let's standardize on
the __ASSEMBLER__ macro that is provided by the compilers now.
This is mostly a mechanical patch (done with a simple "sed -i"
statement), with some manual tweaks in <asm/frame.h>, <asm/hw_irq.h>
and <asm/setup.h> that mentioned this macro in comments with some
missing underscores.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250314071013.1575167-38-thuth@redhat.com
__ASSEMBLY__ is only defined by the Makefile of the kernel, so
this is not really useful for UAPI headers (unless the userspace
Makefile defines it, too). Let's switch to __ASSEMBLER__ which
gets set automatically by the compiler when compiling assembly
code.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Brian Gerst <brgerst@gmail.com>
Link: https://lore.kernel.org/r/20250310104256.123527-1-thuth@redhat.com
According to:
https://gcc.gnu.org/onlinedocs/gcc/Size-of-an-asm.html
the usage of asm pseudo directives in the asm template can confuse
the compiler to wrongly estimate the size of the generated
code.
The LOCK_PREFIX macro expands to several asm pseudo directives, so
its usage in atomic locking insns causes instruction length estimates
to fail significantly (the specially instrumented compiler reports
the estimated length of these asm templates to be 6 instructions long).
This incorrect estimate further causes unoptimal inlining decisions,
un-optimal instruction scheduling and un-optimal code block alignments
for functions that use these locking primitives.
Use asm_inline instead:
https://gcc.gnu.org/pipermail/gcc-patches/2018-December/512349.html
which is a feature that makes GCC pretend some inline assembler code
is tiny (while it would think it is huge), instead of just asm.
For code size estimation, the size of the asm is then taken as
the minimum size of one instruction, ignoring how many instructions
compiler thinks it is.
bloat-o-meter reports the following code size increase
(x86_64 defconfig, gcc-14.2.1):
add/remove: 82/283 grow/shrink: 870/372 up/down: 76272/-43618 (32654)
Total: Before=22770320, After=22802974, chg +0.14%
with top grows (>500 bytes):
Function old new delta
----------------------------------------------------------------
copy_process 6465 10191 +3726
balance_dirty_pages_ratelimited_flags 237 2949 +2712
icl_plane_update_noarm 5800 7969 +2169
samsung_input_mapping 3375 5170 +1795
ext4_do_update_inode.isra - 1526 +1526
__schedule 2416 3472 +1056
__i915_vma_resource_unhold - 946 +946
sched_mm_cid_after_execve 175 1097 +922
__do_sys_membarrier - 862 +862
filemap_fault 2666 3462 +796
nl80211_send_wiphy 11185 11874 +689
samsung_input_mapping.cold 900 1500 +600
virtio_gpu_queue_fenced_ctrl_buffer 839 1410 +571
ilk_update_pipe_csc 1201 1735 +534
enable_step - 525 +525
icl_color_commit_noarm 1334 1847 +513
tg3_read_bc_ver - 501 +501
and top shrinks (>500 bytes):
Function old new delta
----------------------------------------------------------------
nl80211_send_iftype_data 580 - -580
samsung_gamepad_input_mapping.isra.cold 604 - -604
virtio_gpu_queue_ctrl_sgs 724 - -724
tg3_get_invariants 9218 8376 -842
__i915_vma_resource_unhold.part 899 - -899
ext4_mark_iloc_dirty 1735 106 -1629
samsung_gamepad_input_mapping.isra 2046 - -2046
icl_program_input_csc 2203 - -2203
copy_mm 2242 - -2242
balance_dirty_pages 2657 - -2657
These code size changes can be grouped into 4 groups:
a) some functions now include once-called functions in full or
in part. These are:
Function old new delta
----------------------------------------------------------------
copy_process 6465 10191 +3726
balance_dirty_pages_ratelimited_flags 237 2949 +2712
icl_plane_update_noarm 5800 7969 +2169
samsung_input_mapping 3375 5170 +1795
ext4_do_update_inode.isra - 1526 +1526
that now include:
Function old new delta
----------------------------------------------------------------
copy_mm 2242 - -2242
balance_dirty_pages 2657 - -2657
icl_program_input_csc 2203 - -2203
samsung_gamepad_input_mapping.isra 2046 - -2046
ext4_mark_iloc_dirty 1735 106 -1629
b) ISRA [interprocedural scalar replacement of aggregates,
interprocedural pass that removes unused function return values
(turning functions returning a value which is never used into void
functions) and removes unused function parameters. It can also
replace an aggregate parameter by a set of other parameters
representing part of the original, turning those passed by reference
into new ones which pass the value directly.]
Top grows and shrinks of this group are listed below:
Function old new delta
----------------------------------------------------------------
ext4_do_update_inode.isra - 1526 +1526
nfs4_begin_drain_session.isra - 249 +249
nfs4_end_drain_session.isra - 168 +168
__guc_action_register_multi_lrc_v70.isra 335 500 +165
__i915_gem_free_objects.isra - 144 +144
...
membarrier_register_private_expedited.isra 108 - -108
syncobj_eventfd_entry_func.isra 445 314 -131
__ext4_sb_bread_gfp.isra 140 - -140
class_preempt_notrace_destructor.isra 145 - -145
p9_fid_put.isra 151 - -151
__mm_cid_try_get.isra 238 - -238
membarrier_global_expedited.isra 294 - -294
mm_cid_get.isra 295 - -295
samsung_gamepad_input_mapping.isra.cold 604 - -604
samsung_gamepad_input_mapping.isra 2046 - -2046
c) different split points of hot/cold split that just move code around:
Top grows and shrinks of this group are listed below:
Function old new delta
----------------------------------------------------------------
samsung_input_mapping.cold 900 1500 +600
__i915_request_reset.cold 311 389 +78
nfs_update_inode.cold 77 153 +76
__do_sys_swapon.cold 404 455 +51
copy_process.cold - 45 +45
tg3_get_invariants.cold 73 115 +42
...
hibernate.cold 671 643 -28
copy_mm.cold 31 - -31
software_resume.cold 249 207 -42
io_poll_wake.cold 106 54 -52
samsung_gamepad_input_mapping.isra.cold 604 - -604
c) full inline of small functions with locking insn (~150 cases).
These bring in most of the code size increase because the removed
function code is now inlined in multiple places. E.g.:
0000000000a50e10 <release_devnum>:
a50e10: 48 63 07 movslq (%rdi),%rax
a50e13: 85 c0 test %eax,%eax
a50e15: 7e 10 jle a50e27 <release_devnum+0x17>
a50e17: 48 8b 4f 50 mov 0x50(%rdi),%rcx
a50e1b: f0 48 0f b3 41 50 lock btr %rax,0x50(%rcx)
a50e21: c7 07 ff ff ff ff movl $0xffffffff,(%rdi)
a50e27: e9 00 00 00 00 jmp a50e2c <release_devnum+0x1c>
a50e28: R_X86_64_PLT32 __x86_return_thunk-0x4
a50e2c: 0f 1f 40 00 nopl 0x0(%rax)
is now fully inlined into the caller function. This is desirable due
to the per function overhead of CPU bug mitigations like retpolines.
FTR a) with -Os (where generated code size really matters) x86_64
defconfig object file decreases by 24.388 kbytes, representing 0.1%
code size decrease:
text data bss dec hex filename
23883860 4617284 814212 29315356 1bf511c vmlinux-old.o
23859472 4615404 814212 29289088 1beea80 vmlinux-new.o
FTR b) clang recognizes "asm inline", but there was no difference in
code sizes:
text data bss dec hex filename
27577163 4503078 807732 32887973 1f5d4a5 vmlinux-clang-patched.o
27577181 4503078 807732 32887991 1f5d4b7 vmlinux-clang-unpatched.o
The performance impact of the patch was assessed by recompiling
fedora-41 6.13.5 kernel and running lmbench with old and new kernel.
The most noticeable improvements were:
Process fork+exit: 270.0952 microseconds
Process fork+execve: 2620.3333 microseconds
Process fork+/bin/sh -c: 6781.0000 microseconds
File /usr/tmp/XXX write bandwidth: 1780350 KB/sec
Pagefaults on /usr/tmp/XXX: 0.3875 microseconds
to:
Process fork+exit: 298.6842 microseconds
Process fork+execve: 1662.7500 microseconds
Process fork+/bin/sh -c: 2127.6667 microseconds
File /usr/tmp/XXX write bandwidth: 1950077 KB/sec
Pagefaults on /usr/tmp/XXX: 0.1958 microseconds
and from:
Socket bandwidth using localhost
0.000001 2.52 MB/sec
0.000064 163.02 MB/sec
0.000128 321.70 MB/sec
0.000256 630.06 MB/sec
0.000512 1207.07 MB/sec
0.001024 2004.06 MB/sec
0.001437 2475.43 MB/sec
10.000000 5817.34 MB/sec
Avg xfer: 3.2KB, 41.8KB in 1.2230 millisecs, 34.15 MB/sec
AF_UNIX sock stream bandwidth: 9850.01 MB/sec
Pipe bandwidth: 4631.28 MB/sec
to:
Socket bandwidth using localhost
0.000001 3.13 MB/sec
0.000064 187.08 MB/sec
0.000128 324.12 MB/sec
0.000256 618.51 MB/sec
0.000512 1137.13 MB/sec
0.001024 1962.95 MB/sec
0.001437 2458.27 MB/sec
10.000000 6168.08 MB/sec
Avg xfer: 3.2KB, 41.8KB in 1.0060 millisecs, 41.52 MB/sec
AF_UNIX sock stream bandwidth: 9921.68 MB/sec
Pipe bandwidth: 4649.96 MB/sec
[ mingo: Prettified the changelog a bit. ]
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20250309170955.48919-1-ubizjak@gmail.com
Use asm_inline() to instruct the compiler that the size of asm()
is the minimum size of one instruction, ignoring how many instructions
the compiler thinks it is. ALTERNATIVE macro that expands to several
pseudo directives causes instruction length estimate to count
more than 20 instructions.
bloat-o-meter reports slight increase of the code size
for x86_64 defconfig object file, compiled with gcc-14.2:
add/remove: 0/2 grow/shrink: 3/0 up/down: 190/-59 (131)
Function old new delta
__copy_user_flushcache 166 247 +81
__memcpy_flushcache 369 437 +68
arch_wb_cache_pmem 6 47 +41
__pfx_clean_cache_range 16 - -16
clean_cache_range 43 - -43
Total: Before=22807167, After=22807298, chg +0.00%
The compiler now inlines and removes the clean_cache_range() function.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250313102715.333142-2-ubizjak@gmail.com
Current minimum required version of binutils is 2.25,
which supports CLFLUSHOPT and CLWB instruction mnemonics.
Replace the byte-wise specification of CLFLUSHOPT and
CLWB with these proper mnemonics.
No functional change intended.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250313102715.333142-1-ubizjak@gmail.com
Use asm_inline() to instruct the compiler that the size of asm()
is the minimum size of one instruction, ignoring how many instructions
the compiler thinks it is. ALTERNATIVE macro that expands to several
pseudo directives causes instruction length estimate to count
more than 20 instructions.
bloat-o-meter reports slight reduction of the code size
for x86_64 defconfig object file, compiled with gcc-14.2:
add/remove: 6/12 grow/shrink: 59/50 up/down: 3389/-3560 (-171)
Total: Before=22734393, After=22734222, chg -0.00%
where 29 instances of code blocks involving POPCNT now gets inlined,
resulting in the removal of several functions:
format_is_yuv_semiplanar.part.isra 41 - -41
cdclk_divider 69 - -69
intel_joiner_adjust_timings 140 - -140
nl80211_send_wowlan_tcp_caps 369 - -369
nl80211_send_iftype_data 579 - -579
__do_sys_pidfd_send_signal 809 - -809
One noticeable change is:
pcpu_page_first_chunk 1075 1060 -15
Where the compiler now inlines 4 more instances of POPCNT insns,
but still manages to compile to a function with smaller code size.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250312123905.149298-3-ubizjak@gmail.com
Use ASM_CALL_CONSTRAINT to prevent inline asm() that includes call
instruction from being scheduled before the frame pointer gets set
up by the containing function. This unconstrained scheduling might
cause objtool to print a "call without frame pointer save/setup"
warning. Current versions of compilers don't seem to trigger this
condition, but without this constraint there's nothing to prevent
the compiler from scheduling the insn in front of frame creation.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250312123905.149298-2-ubizjak@gmail.com
The __ref_stack_chk_guard symbol doesn't exist on UP:
<stdin>:4:15: error: ‘__ref_stack_chk_guard’ undeclared here (not in a function)
Fix the #ifdef around the entry.S export.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Uros Bizjak <ubizjak@gmail.com>
Link: https://lore.kernel.org/r/20250123190747.745588-8-brgerst@gmail.com
Clang versions before 17 will not honour -fdirect-access-external-data
for the load of the stack cookie emitted into each function's prologue
and epilogue, and will emit a GOT based reference instead, e.g.,
4c 8b 2d 00 00 00 00 mov 0x0(%rip),%r13
18a: R_X86_64_REX_GOTPCRELX __ref_stack_chk_guard-0x4
65 49 8b 45 00 mov %gs:0x0(%r13),%rax
This is inefficient, but at least, the linker will usually follow the
rules of the x86 psABI, and relax the GOT load into a RIP-relative LEA
instruction. This is still suboptimal, as the per-CPU load could use a
RIP-relative reference directly, but at least it gets rid of the first
load from memory.
However, Boris reports that in some cases, when using distro builds of
Clang/LLD 15, the first load gets relaxed into
49 c7 c6 20 c0 55 86 mov $0xffffffff8655c020,%r14
ffffffff8373bf0f: R_X86_64_32S __ref_stack_chk_guard
65 49 8b 06 mov %gs:(%r14),%rax
instead, which is fine in principle, as MOV may be cheaper than LEA on
some micro-architectures. However, such absolute references assume that
the variable in question can be accessed via the kernel virtual mapping,
and this is not guaranteed for the startup code residing in .head.text.
This is therefore a true positive, that was caught using the recently
introduced relocs check for absolute references in the startup code:
Absolute reference to symbol '__ref_stack_chk_guard' not permitted in .head.text
Work around the issue by disabling the stack protector in the startup
code for Clang versions older than 17.
Fixes: 80d47defdd ("x86/stackprotector/64: Convert to normal per-CPU variable")
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250312102740.602870-2-ardb+git@google.com
Merge common x86_32 and x86_64 code in crash_setup_regs()
using macros from <asm/asm.h>.
The compiled object files before and after the patch are unchanged.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Baoquan He <bhe@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lore.kernel.org/r/20250306145227.55819-1-ubizjak@gmail.com
Add an assembly macro to refer runtime cost. It hides linker magic and
makes assembly more readable.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250304153342.2016569-1-kirill.shutemov@linux.intel.com
X86_FEATURE_CONSTANT_TSC is a Linux-defined, synthesized feature flag.
It is used across several vendors. Intel CPUs will set the feature when
the architectural CPUID.80000007.EDX[1] bit is set. There are also some
Intel CPUs that have the X86_FEATURE_CONSTANT_TSC behavior but don't
enumerate it with the architectural bit. Those currently have a model
range check.
Today, virtually all of the CPUs that have the CPUID bit *also* match
the "model >= 0x0e" check. This is confusing. Instead of an open-ended
check, pick some models (INTEL_IVYBRIDGE and P4_WILLAMETTE) as the end
of goofy CPUs that should enumerate the bit but don't. These models are
relatively arbitrary but conservative pick for this.
This makes it obvious that later CPUs (like Family 18+) no longer need
to synthesize X86_FEATURE_CONSTANT_TSC.
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20250219184133.816753-14-sohil.mehta@intel.com
Introduce markers and names for some Family 6 and Family 15 models and
replace x86_model checks with VFM ones.
Since the VFM checks are closed ended and only applicable to Intel, get
rid of the explicit Intel vendor check as well.
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lore.kernel.org/r/20250219184133.816753-13-sohil.mehta@intel.com
X86_FEATURE_REP_GOOD is a linux defined feature flag to track whether
fast string operations should be used for copy_page(). It is also used
as a second alternative for clear_page() if enhanced fast string
operations (ERMS) are not available.
X86_FEATURE_ERMS is an Intel-specific hardware-defined feature flag that
tracks hardware support for Enhanced Fast strings. It is used to track
whether Fast strings should be used for similar memory copy and memory
clearing operations.
On top of these, there is a FAST_STRING enable bit in the
IA32_MISC_ENABLE MSR. It is typically controlled by the BIOS to provide
a hint to the hardware and the OS on whether fast string operations are
preferred.
Commit:
161ec53c70 ("x86, mem, intel: Initialize Enhanced REP MOVSB/STOSB")
introduced a mechanism to honor the BIOS preference for fast string
operations and clear the above feature flags if needed.
Unfortunately, the current initialization code for Intel to set and
clear these bits is confusing at best and likely incorrect.
X86_FEATURE_REP_GOOD is cleared in early_init_intel() if
MISC_ENABLE.FAST_STRING is 0. But it gets set later on unconditionally
for all Family 6 processors in init_intel(). This not only overrides the
BIOS preference but also contradicts the earlier check.
Fix this by combining the related checks and always relying on the BIOS
provided preference for fast string operations. This simplification
makes sure the upcoming Intel Family 18 and 19 models are covered as
well.
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250219184133.816753-12-sohil.mehta@intel.com
Some old crusty CPUs need an extra delay that slows down booting. See
the comment above 'init_udelay' for details. Newer CPUs don't need the
delay.
Right now, for Intel, Family 6 and only Family 6 skips the delay. That
leaves out both the Family 15 (Pentium 4s) and brand new Family 18/19
models.
The omission of Family 15 (Pentium 4s) seems like an oversight and 18/19
do not need the delay.
Skip the delay on all Intel processors Family 6 and beyond.
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250219184133.816753-11-sohil.mehta@intel.com
Very old multiprocessor systems required a 10 msec delay between
asserting and de-asserting INIT but modern processors do not require
this delay.
Over time the usage of the "quirk" wording while setting the INIT delay
has become misleading. The code comments suggest that modern processors
need to be quirked, which clears the default init_udelay of 10 msec,
while legacy processors don't need the quirk and continue to use the
default init_udelay.
With a lot more modern processors, the wording should be inverted if at
all needed. Instead, simplify the comments and the code by getting rid
of "quirk" usage altogether and clarifying the following:
- Old legacy processors -> Set the "legacy" 10 msec delay
- Modern processors -> Do not set any delay
No functional change.
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250219184133.816753-10-sohil.mehta@intel.com
Update the Intel Family checks to consistently use Family 15 instead of
Family 0xF. Also, get rid of one of last usages of x86_model by using
the new VFM checks.
Update the incorrect comment since the check has changed since the
initial commit:
ee1ca48fae ("ACPI: Disable ARB_DISABLE on platforms where it is not needed")
The two changes were:
- 3e2ada5867 ("ACPI: fix Compaq Evo N800c (Pentium 4m) boot hang regression")
removed the P4 - Family 15.
- 03a05ed115 ("ACPI: Use the ARB_DISABLE for the CPU which model id is less than 0x0f.")
got rid of CORE_YONAH - Family 6, model E.
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20250219184133.816753-9-sohil.mehta@intel.com
Introduce names for some Family 5 models and convert some of the checks
to be VFM based.
Also, to keep the file sorted by family, move Family 5 to the top of the
header file.
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/20250219184133.816753-8-sohil.mehta@intel.com
Introduce names for some old pentium 4 models and replace the x86_model
checks with VFM ones.
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/20250219184133.816753-7-sohil.mehta@intel.com
Introduce names for some old pentium models and replace the x86_model
checks with VFM ones.
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/20250219184133.816753-6-sohil.mehta@intel.com
Simplify one of the last few Intel x86_model checks in arch/x86 by
substituting it with a VFM one.
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/20250219184133.816753-5-sohil.mehta@intel.com
The Family model check to read the processor flag MSR is misleading and
potentially incorrect. It doesn't consider Family while comparing the
model number. The original check did have a Family number but it got
lost/moved during refactoring.
intel_collect_cpu_info() is called through multiple paths such as early
initialization, CPU hotplug as well as IFS image load. Some of these
flows would be error prone due to the ambiguous check.
Correct the processor flag scan check to use a Family number and update
it to a VFM based one to make it more readable.
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/20250219184133.816753-4-sohil.mehta@intel.com
The alignment preference for 32-bit MOVSL based bulk memory move has
been 8-byte for a long time. However this preference is only set for
Family 6 and 15 processors.
Use the same preference for upcoming Family numbers 18 and 19. Also, use
a simpler VFM based check instead of switching based on Family numbers.
Refresh the comment to reflect the new check.
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250219184133.816753-3-sohil.mehta@intel.com
APIC detection is currently limited to a few specific Families and will
not match the upcoming Families >=18.
Extend the check to include all Families 6 or greater. Also convert it
to a VFM check to make it simpler.
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/20250219184133.816753-2-sohil.mehta@intel.com
Use u32 instead of uint32_t in hypervisor_cpuid_base().
Yes, uint32_t is used in Xen code et al, but this is a core x86
architecture header and we should standardize on the type that
is being used overwhelmingly in related x86 architecture code.
The two types are the same so there should be no build warnings.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: "Ahmed S. Darwish" <darwi@linutronix.de>
Cc: x86-cpuid@lists.linux.dev
Link: https://lore.kernel.org/r/20250317221824.3738853-6-mingo@kernel.org
Convert all uses of 'unsigned int' to 'u32' in <asm/cpuid/api.h>.
This is how a lot of the call sites are doing it, and the two
types are equivalent in the C sense - but 'u32' better expresses
that these are expressions of an immutable hardware ABI.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Xin Li (Intel) <xin@zytor.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: "Ahmed S. Darwish" <darwi@linutronix.de>
Cc: x86-cpuid@lists.linux.dev
Link: https://lore.kernel.org/r/20250317221824.3738853-5-mingo@kernel.org
- Include <asm/cpuid/types.h> first, as is customary. This also has
the side effect of build-testing the header dependency assumptions
in the types header.
- No newline necessary after the SPDX line
- Newline necessary after inline function definitions
- Rename native_cpuid_reg() to NATIVE_CPUID_REG(): it's a CPP macro,
whose name we capitalize in such cases.
- Prettify the CONFIG_PARAVIRT_XXL inclusion block a bit
- Standardize register references in comments to EAX/EBX/ECX/etc.,
from the hodgepodge of references.
- s/cpus/CPUs because why add noise to common acronyms?
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: "Ahmed S. Darwish" <darwi@linutronix.de>
Cc: x86-cpuid@lists.linux.dev
Link: https://lore.kernel.org/r/20250317221824.3738853-4-mingo@kernel.org
- We have 0x0d, 0x9 and 0x1d as literals for the CPUID_LEAF definitions,
pick a single, consistent style of 0xZZ literals.
- Likewise, harmonize the style of the 'struct cpuid_regs' list of
registers with that of 'enum cpuid_regs_idx'. Because while computers
don't care about unnecessary visual noise, humans do.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: "Ahmed S. Darwish" <darwi@linutronix.de>
Cc: x86-cpuid@lists.linux.dev
Link: https://lore.kernel.org/r/20250317221824.3738853-3-mingo@kernel.org
In preparation for future commits where CPUID headers will be expanded,
refactor the CPUID header <asm/cpuid.h> into:
asm/cpuid/
├── api.h
└── types.h
Move the CPUID data structures into <asm/cpuid/types.h> and the access
APIs into <asm/cpuid/api.h>. Let <asm/cpuid.h> be just an include of
<asm/cpuid/api.h> so that existing call sites do not break.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: "Ahmed S. Darwish" <darwi@linutronix.de>
Cc: x86-cpuid@lists.linux.dev
Link: https://lore.kernel.org/r/20250317221824.3738853-2-mingo@kernel.org
Move sys_ni_syscall() to kernel/process.c, and remove the now empty
entry/common.c
No functional changes.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20250314151220.862768-6-brgerst@gmail.com
Since commit:
2e958a8a51 ("x86/entry/x32: Rename __x32_compat_sys_* to __x64_compat_sys_*")
the ABI prefix for x32 syscalls is the same as native 64-bit
syscalls. Move the x32 syscall table to syscall_64.c
No functional changes.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20250314151220.862768-5-brgerst@gmail.com
Some of the ACP drivers will poll registers through SMN using
read_poll_timeout() which requires returning the result of the register read
as the argument.
Add a helper to do just that.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250217231747.1656228-2-superm1@kernel.org
There are certain registers on AMD Zen systems that can only be accessed
through SMN.
Introduce a new interface that provides debugfs files for accessing SMN. As
this introduces the capability for userspace to manipulate the hardware in
unpredictable ways, taint the kernel when writing.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250130-wip-x86-amd-nb-cleanup-v4-3-b5cc997e471b@amd.com
Offsets 0x60 and 0x64 are used internally by kernel drivers that call
the amd_smn_read() and amd_smn_write() functions. If userspace accesses
the regions at the same time as the kernel it may cause malfunctions in
drivers using the offsets.
Add these offsets to the exclusions so that the kernel is tainted if a
non locked down userspace tries to access them.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250130-wip-x86-amd-nb-cleanup-v4-2-b5cc997e471b@amd.com
The HSMP interface is just an SMN interface with different offsets.
Define an HSMP wrapper in the SMN code and have the HSMP platform driver
use that rather than a local solution.
Also, remove the "root" member from AMD_NB, since there are no more
users of it.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Carlos Bilbao <carlos.bilbao@kernel.org>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250130-wip-x86-amd-nb-cleanup-v4-1-b5cc997e471b@amd.com
ia32_emulation_override_cmdline() is an early_param() arg and these
are only needed at boot time. In fact, all other early_param() functions
in arch/x86 seem to have '__init' annotation and
ia32_emulation_override_cmdline() is the only exception.
Fixes: a11e097504 ("x86: Make IA32_EMULATION boot time configurable")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Link: https://lore.kernel.org/all/20241210151650.1746022-1-vkuznets%40redhat.com
Currently, the cpuid_deps[] table is only exercised when a particular
feature is explicitly disabled and clear_cpu_cap() is called. However,
some of these listed dependencies might already be missing during boot.
These types of errors shouldn't generally happen in production
environments, but they could sometimes sneak through, especially when
VMs and Kconfigs are in the mix. Also, the kernel might introduce
artificial dependencies between unrelated features, such as making LAM
depend on LASS.
Unexpected failures can occur when the kernel tries to use such
features. Add a simple boot-time scan of the cpuid_deps[] table to
detect the missing dependencies. One option is to disable all of such
features during boot, but that may cause regressions in existing
systems. For now, just warn about the missing dependencies to create
awareness.
As a trade-off between spamming the kernel log and keeping track of all
the features that have been warned about, only warn about the first
missing dependency. Any subsequent unmet dependency will only be logged
after the first one has been resolved.
Features are typically represented through unsigned integers within the
kernel, though some of them have user-friendly names if they are exposed
via /proc/cpuinfo.
Show the friendlier name if available, otherwise display the
X86_FEATURE_* numerals to make it easier to identify the feature.
Suggested-by: Tony Luck <tony.luck@intel.com>
Suggested-by: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20250313201608.3304135-1-sohil.mehta@intel.com
The affected CPU table (cpu_vuln_blacklist) marks Alderlake and Raptorlake
P-only parts affected by RFDS. This is not true because only E-cores are
affected by RFDS. With the current family/model matching it is not possible
to differentiate the unaffected parts, as the affected and unaffected
hybrid variants have the same model number.
Add a cpu-type match as well for such parts so as to exclude P-only parts
being marked as affected.
Note, family/model and cpu-type enumeration could be inaccurate in
virtualized environments. In a guest affected status is decided by RFDS_NO
and RFDS_CLEAR bits exposed by VMMs.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/20250311-add-cpu-type-v8-5-e8514dcaaff2@linux.intel.com
Non-hybrid CPU variants that share the same Family/Model could be
differentiated by their cpu-type. x86_match_cpu() currently does not use
cpu-type for CPU matching.
Dave Hansen suggested to use below conditions to match CPU-type:
1. If CPU_TYPE_ANY (the wildcard), then matched
2. If hybrid, then matched
3. If !hybrid, look at the boot CPU and compare the cpu-type to determine
if it is a match.
This special case for hybrid systems allows more compact vulnerability
list. Imagine that "Haswell" CPUs might or might not be hybrid and that
only Atom cores are vulnerable to Meltdown. That means there are three
possibilities:
1. P-core only
2. Atom only
3. Atom + P-core (aka. hybrid)
One might be tempted to code up the vulnerability list like this:
MATCH( HASWELL, X86_FEATURE_HYBRID, MELTDOWN)
MATCH_TYPE(HASWELL, ATOM, MELTDOWN)
Logically, this matches #2 and #3. But that's a little silly. You would
only ask for the "ATOM" match in cases where there *WERE* hybrid cores in
play. You shouldn't have to _also_ ask for hybrid cores explicitly.
In short, assume that processors that enumerate Hybrid==1 have a
vulnerable core type.
Update x86_match_cpu() to also match cpu-type. Also treat hybrid systems as
special, and match them to any cpu-type.
Suggested-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/20250311-add-cpu-type-v8-4-e8514dcaaff2@linux.intel.com
In addition to matching vendor/family/model/feature, for hybrid variants it is
required to also match cpu-type. For example, some CPU vulnerabilities like
RFDS only affect a specific cpu-type.
To be able to also match CPUs based on their type, add a new field "type" to
struct x86_cpu_id which is used by the CPU-matching tables. Introduce
X86_CPU_TYPE_ANY for the cases that don't care about the cpu-type.
[ bp: Massage commit message. ]
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/20250311-add-cpu-type-v8-3-e8514dcaaff2@linux.intel.com
To add cpu-type to the existing CPU matching infrastructure, the base macro
X86_MATCH_VENDOR_FAM_MODEL_STEPPINGS_FEATURE need to append _CPU_TYPE. This
makes an already long name longer, and somewhat incomprehensible.
To avoid this, rename the base macro to X86_MATCH_CPU. The macro name
doesn't need to explicitly tell everything that it matches. The arguments
to the macro already hint at that.
For consistency, use this base macro to define X86_MATCH_VFM and friends.
Remove unused X86_MATCH_VENDOR_FAM_MODEL_FEATURE while at it.
[ bp: Massage commit message. ]
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/20250311-add-cpu-type-v8-2-e8514dcaaff2@linux.intel.com
The functionalities of {disabled,required}-features.h have been replaced with
the auto-generated generated/<asm/cpufeaturemasks.h> header.
Thus they are no longer needed and can be removed.
None of the macros defined in {disabled,required}-features.h is used in tools,
delete them too.
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250305184725.3341760-4-xin@zytor.com
Introduce an AWK script to auto-generate the <asm/cpufeaturemasks.h> header
with required and disabled feature masks based on <asm/cpufeatures.h>
and the current build config.
Thus for any CPU feature with a build config, e.g., X86_FRED, simply add:
config X86_DISABLED_FEATURE_FRED
def_bool y
depends on !X86_FRED
to arch/x86/Kconfig.cpufeatures, instead of adding a conditional CPU
feature disable flag, e.g., DISABLE_FRED.
Lastly, the generated required and disabled feature masks will be added to
their corresponding feature masks for this particular compile-time
configuration.
[ Xin: build integration improvements ]
[ mingo: Improved changelog and comments ]
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250305184725.3341760-3-xin@zytor.com
Required and disabled feature masks completely rely on build configs,
i.e., once a build config is fixed, so are the feature masks.
To prepare for auto-generating the <asm/cpufeaturemasks.h> header
with required and disabled feature masks based on a build config,
add feature Kconfig items:
- X86_REQUIRED_FEATURE_x
- X86_DISABLED_FEATURE_x
each of which may be set to "y" if and only if its preconditions from
current build config are met.
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250228082338.73859-3-xin@zytor.com
The current calculation of the 'next' virtual address in the
page table initialization functions in arch/x86/mm/ident_map.c
doesn't protect against wrapping to zero.
This is a theoretical issue that cannot happen currently,
the problematic case is possible only if the user sets a
high enough x86_mapping_info::offset value - which no
current code in the upstream kernel does.
( The wrapping to zero only occurs if the top PGD entry is accessed.
There are no such users upstream. Only hibernate_64.c uses
x86_mapping_info::offset, and it operates on the direct mapping
range, which is not the top PGD entry. )
Should such an overflow happen, it can result in page table
corruption and a hang.
To future-proof this code, replace the manual 'next' calculation
with p?d_addr_end() which handles wrapping correctly.
[ Backporter's note: there's no need to backport this patch. ]
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20241016111458.846228-2-kirill.shutemov@linux.intel.com
The init_transition_pgtable() functions maps the page with
asm_acpi_mp_play_dead() into an identity mapping.
Replace open-coded manual page table initialization with
kernel_ident_mapping_init() to avoid code duplication.
Use x86_mapping_info::offset to get the page mapped at the
correct location.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20241016111458.846228-3-kirill.shutemov@linux.intel.com
When executing the INVLPGB instruction on a bare-metal host or hypervisor, if
the ASID valid bit is not set, the instruction will flush the TLB entries that
match the specified criteria for any ASID, not just the those of the host. If
virtual machines are running on the system, this may result in inadvertent
flushes of guest TLB entries.
When executing the INVLPGB instruction in a guest and the INVLPGB instruction is
not intercepted by the hypervisor, the hardware will replace the requested ASID
with the guest ASID and set the ASID valid bit before doing the broadcast
invalidation. Thus a guest is only able to flush its own TLB entries.
So to limit the host TLB flushing reach, always set the ASID valid bit using an
ASID value of 0 (which represents the host/hypervisor). This will will result in
the desired effect in both host and guest.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250304120449.GHZ8bsYYyEBOKQIxBm@fat_crate.local
With AMD TCE (translation cache extensions) only the intermediate mappings
that cover the address range zapped by INVLPG / INVLPGB get invalidated,
rather than all intermediate mappings getting zapped at every TLB invalidation.
This can help reduce the TLB miss rate, by keeping more intermediate mappings
in the cache.
From the AMD manual:
Translation Cache Extension (TCE) Bit. Bit 15, read/write. Setting this bit to
1 changes how the INVLPG, INVLPGB, and INVPCID instructions operate on TLB
entries. When this bit is 0, these instructions remove the target PTE from the
TLB as well as all upper-level table entries that are cached in the TLB,
whether or not they are associated with the target PTE. When this bit is set,
these instructions will remove the target PTE and only those upper-level
entries that lead to the target PTE in the page table hierarchy, leaving
unrelated upper-level entries intact.
[ bp: use cpu_has()... I know, it is a mess. ]
Signed-off-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250226030129.530345-13-riel@surriel.com
There is not enough room in the 12-bit ASID address space to hand out
broadcast ASIDs to every process. Only hand out broadcast ASIDs to processes
when they are observed to be simultaneously running on 4 or more CPUs.
This also allows single threaded process to continue using the cheaper, local
TLB invalidation instructions like INVLPGB.
Due to the structure of flush_tlb_mm_range(), the INVLPGB flushing is done in
a generically named broadcast_tlb_flush() function which can later also be
used for Intel RAR.
Combined with the removal of unnecessary lru_add_drain calls() (see
https://lore.kernel.org/r/20241219153253.3da9e8aa@fangorn) this results in
a nice performance boost for the will-it-scale tlb_flush2_threads test on an
AMD Milan system with 36 cores:
- vanilla kernel: 527k loops/second
- lru_add_drain removal: 731k loops/second
- only INVLPGB: 527k loops/second
- lru_add_drain + INVLPGB: 1157k loops/second
Profiling with only the INVLPGB changes showed while TLB invalidation went
down from 40% of the total CPU time to only around 4% of CPU time, the
contention simply moved to the LRU lock.
Fixing both at the same time about doubles the number of iterations per second
from this case.
Comparing will-it-scale tlb_flush2_threads with several different numbers of
threads on a 72 CPU AMD Milan shows similar results. The number represents the
total number of loops per second across all the threads:
threads tip INVLPGB
1 315k 304k
2 423k 424k
4 644k 1032k
8 652k 1267k
16 737k 1368k
32 759k 1199k
64 636k 1094k
72 609k 993k
1 and 2 thread performance is similar with and without INVLPGB, because
INVLPGB is only used on processes using 4 or more CPUs simultaneously.
The number is the median across 5 runs.
Some numbers closer to real world performance can be found at Phoronix, thanks
to Michael:
https://www.phoronix.com/news/AMD-INVLPGB-Linux-Benefits
[ bp:
- Massage
- :%s/\<static_cpu_has\>/cpu_feature_enabled/cgi
- :%s/\<clear_asid_transition\>/mm_clear_asid_transition/cgi
- Fold in a 0day bot fix: https://lore.kernel.org/oe-kbuild-all/202503040000.GtiWUsBm-lkp@intel.com
]
Signed-off-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Nadav Amit <nadav.amit@gmail.com>
Link: https://lore.kernel.org/r/20250226030129.530345-11-riel@surriel.com
A global ASID is allocated for the lifetime of a process. Free the global ASID
at process exit time.
[ bp: Massage, create helpers, hide details inside them. ]
Signed-off-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250226030129.530345-10-riel@surriel.com
Do context switch and TLB flush support for processes that use a global
ASID and PCID across all CPUs.
At both context switch time and TLB flush time, it needs to be checked whether
a task is switching to a global ASID, and, if so, reload the TLB with the new
ASID as appropriate.
In both code paths, the TLB flush is avoided if a global ASID is used, because
the global ASIDs are always kept up to date across CPUs, even when the
process is not running on a CPU.
[ bp:
- Massage
- :%s/\<static_cpu_has\>/cpu_feature_enabled/cgi
]
Signed-off-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250226030129.530345-9-riel@surriel.com
Add functions to manage global ASID space. Multithreaded processes that are
simultaneously active on 4 or more CPUs can get a global ASID, resulting in the
same PCID being used for that process on every CPU.
This in turn will allow the kernel to use hardware-assisted TLB flushing
through AMD INVLPGB or Intel RAR for these processes.
[ bp:
- Extend use_global_asid() comment
- s/X86_BROADCAST_TLB_FLUSH/BROADCAST_TLB_FLUSH/g
- other touchups ]
Signed-off-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250226030129.530345-8-riel@surriel.com
Page reclaim tracks only the CPU(s) where the TLB needs to be flushed, rather
than all the individual mappings that may be getting invalidated.
Use broadcast TLB flushing when that is available.
[ bp: Massage commit message. ]
Signed-off-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250226030129.530345-7-riel@surriel.com
Use broadcast TLB invalidation for kernel addresses when available.
Remove the need to send IPIs for kernel TLB flushes.
[ bp: Integrate dhansen's comments additions, merge the
flush_tlb_all() change into this one too. ]
Signed-off-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250226030129.530345-5-riel@surriel.com
Add helper functions and definitions needed to use broadcast TLB
invalidation on AMD CPUs.
[ bp:
- Cleanup commit message
- Improve and expand comments
- push the preemption guards inside the invlpgb* helpers
- merge improvements from dhansen
- add !CONFIG_BROADCAST_TLB_FLUSH function stubs because Clang
can't do DCE properly yet and looks at the inline asm and
complains about it getting a u64 argument on 32-bit code ]
Signed-off-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250226030129.530345-4-riel@surriel.com
In addition, the CPU advertises the maximum number of pages that can be
shot down with one INVLPGB instruction in CPUID. Save that information
for later use.
[ bp: use cpu_has(), typos, massage. ]
Signed-off-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250226030129.530345-3-riel@surriel.com
Reduce code duplication by consolidating the decision point for whether to do
individual invalidations or a full flush inside get_flush_tlb_info().
Suggested-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Link: https://lore.kernel.org/r/20250226030129.530345-2-riel@surriel.com
At least with CONFIG_PHYSICAL_START=0x100000, if there is < 4 MiB of
contiguous free memory available at this point, the kernel will crash
and burn because memblock_phys_alloc_range() returns 0 on failure,
which leads memblock_phys_free() to throw the first 4 MiB of physical
memory to the wolves.
At a minimum it should fail gracefully with a meaningful diagnostic,
but in fact everything seems to work fine without the weird reserve
allocation.
Signed-off-by: Philip Redkin <me@rarity.fan>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lore.kernel.org/r/94b3e98f-96a7-3560-1f76-349eb95ccf7f@rarity.fan
Doing this allows using registers as retrieved from an mcontext to be
pushed to a process using PTRACE_SETREGS.
It is not entirely clear to me why CSGSFS was masked. Doing so creates
issues when using the mcontext as process state in seccomp and simply
copying the register appears to work perfectly fine for ptrace.
Signed-off-by: Benjamin Berg <benjamin@sipsolutions.net>
Link: https://patch.msgid.link/20250224181827.647129-2-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Minimum version of binutils required to compile the kernel is 2.25.
This version correctly handles the "lock" prefix, so it is possible
to remove the semicolon, which was used to support ancient versions
of GNU as.
Due to the semicolon, the compiler considers "lock; insn" as two
separate instructions. Removing the semicolon makes asm length
calculations more accurate, consequently making scheduling and
inlining decisions of the compiler more accurate.
Removing the semicolon also enables assembler checks involving lock
prefix. Trying to assemble e.g. "lock andl %eax, %ebx" results in:
Error: expecting lockable instruction after `lock'
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://patch.msgid.link/20250228090058.2499163-1-ubizjak@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Instead of dynamically allocating the pointer to the vdso page during
boot, we can just allocate it statically. Doing so will reduce error
handling and make the code slightly more readable.
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20250212045756.164977-1-tiwei.btw@antgroup.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Mark read-only data actually read-only (simple mprotect), and
to be able to test it also implement _nofault accesses. This
works by setting up a new "segv_continue" pointer in current,
and then when we hit a segfault we change the signal return
context so that we continue at that address. The code using
this sets it up so that it jumps to a label and then aborts
the access that way, returning -EFAULT.
It's possible to optimize the ___backtrack_faulted() thing by
using asm goto (compiler version dependent) and/or gcc's (not
sure if clang has it) &&label extension, but at least in one
attempt I made the && caused the compiler to not load -EFAULT
into the register in case of jumping to the &&label from the
fault handler. So leave it like this for now.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Co-developed-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20250210160926.420133-2-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In order to work around some issues with disabling SSE on older versions
of gcc (compilation would fail upon seeing a function declaration
containing a float, even if it was never called or defined), the
corresponding CFLAGS and RUSTFLAGS were only set when using clang.
However, this led to two problems:
- Newer gcc versions also wouldn't get the correct flags, despite not
having the bug.
- The RUSTFLAGS for setting the rust target definition were not set,
despite being unrelated. This works by chance for x86_64, as the
built-in default target is close enough, but not for 32-bit x86.
Move the target definition outside the conditional block, and update the
condition to take into account the gcc version.
Fixes: a3046a618a ("um: Only disable SSE on clang to work around old GCC bugs")
Signed-off-by: David Gow <davidgow@google.com>
Link: https://patch.msgid.link/20250210105353.2238769-2-davidgow@google.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Patch series "mm/hwpoison: Fix regressions in memory failure handling",
v4.
## 1. What am I trying to do:
This patchset resolves two critical regressions related to memory failure
handling that have appeared in the upstream kernel since version 5.17, as
compared to 5.10 LTS.
- copyin case: poison found in user page while kernel copying from user space
- instr case: poison found while instruction fetching in user space
## 2. What is the expected outcome and why
- For copyin case:
Kernel can recover from poison found where kernel is doing get_user() or
copy_from_user() if those places get an error return and the kernel return
-EFAULT to the process instead of crashing. More specifily, MCE handler
checks the fixup handler type to decide whether an in kernel #MC can be
recovered. When EX_TYPE_UACCESS is found, the PC jumps to recovery code
specified in _ASM_EXTABLE_FAULT() and return a -EFAULT to user space.
- For instr case:
If a poison found while instruction fetching in user space, full recovery
is possible. User process takes #PF, Linux allocates a new page and fills
by reading from storage.
## 3. What actually happens and why
- For copyin case: kernel panic since v5.17
Commit 4c132d1d84 ("x86/futex: Remove .fixup usage") introduced a new
extable fixup type, EX_TYPE_EFAULT_REG, and later patches updated the
extable fixup type for copy-from-user operations, changing it from
EX_TYPE_UACCESS to EX_TYPE_EFAULT_REG. It breaks previous EX_TYPE_UACCESS
handling when posion found in get_user() or copy_from_user().
- For instr case: user process is killed by a SIGBUS signal due to #CMCI
and #MCE race
When an uncorrected memory error is consumed there is a race between the
CMCI from the memory controller reporting an uncorrected error with a UCNA
signature, and the core reporting and SRAR signature machine check when
the data is about to be consumed.
### Background: why *UN*corrected errors tied to *C*MCI in Intel platform [1]
Prior to Icelake memory controllers reported patrol scrub events that
detected a previously unseen uncorrected error in memory by signaling a
broadcast machine check with an SRAO (Software Recoverable Action
Optional) signature in the machine check bank. This was overkill because
it's not an urgent problem that no core is on the verge of consuming that
bad data. It's also found that multi SRAO UCE may cause nested MCE
interrupts and finally become an IERR.
Hence, Intel downgrades the machine check bank signature of patrol scrub
from SRAO to UCNA (Uncorrected, No Action required), and signal changed to
#CMCI. Just to add to the confusion, Linux does take an action (in
uc_decode_notifier()) to try to offline the page despite the UC*NA*
signature name.
### Background: why #CMCI and #MCE race when poison is consuming in
Intel platform [1]
Having decided that CMCI/UCNA is the best action for patrol scrub errors,
the memory controller uses it for reads too. But the memory controller is
executing asynchronously from the core, and can't tell the difference
between a "real" read and a speculative read. So it will do CMCI/UCNA if
an error is found in any read.
Thus:
1) Core is clever and thinks address A is needed soon, issues a
speculative read.
2) Core finds it is going to use address A soon after sending the read
request
3) The CMCI from the memory controller is in a race with MCE from the
core that will soon try to retire the load from address A.
Quite often (because speculation has got better) the CMCI from the memory
controller is delivered before the core is committed to the instruction
reading address A, so the interrupt is taken, and Linux offlines the page
(marking it as poison).
## Why user process is killed for instr case
Commit 046545a661 ("mm/hwpoison: fix error page recovered but reported
"not recovered"") tries to fix noise message "Memory error not recovered"
and skips duplicate SIGBUSs due to the race. But it also introduced a bug
that kill_accessing_process() return -EHWPOISON for instr case, as result,
kill_me_maybe() send a SIGBUS to user process.
# 4. The fix, in my opinion, should be:
- For copyin case:
The key point is whether the error context is in a read from user memory.
We do not care about the ex-type if we know its a MOV reading from
userspace.
is_copy_from_user() return true when both of the following two checks are
true:
- the current instruction is copy
- source address is user memory
If copy_user is true, we set
m->kflags |= MCE_IN_KERNEL_COPYIN | MCE_IN_KERNEL_RECOV;
Then do_machine_check() will try fixup_exception() first.
- For instr case: let kill_accessing_process() return 0 to prevent a SIGBUS.
- For patch 3:
The return value of memory_failure() is quite important while discussed
instr case regression with Tony and Miaohe for patch 2, so add comment
about the return value.
This patch (of 3):
Commit 4c132d1d84 ("x86/futex: Remove .fixup usage") introduced a new
extable fixup type, EX_TYPE_EFAULT_REG, and commit 4c132d1d84
("x86/futex: Remove .fixup usage") updated the extable fixup type for
copy-from-user operations, changing it from EX_TYPE_UACCESS to
EX_TYPE_EFAULT_REG. The error context for copy-from-user operations no
longer functions as an in-kernel recovery context. Consequently, the
error context for copy-from-user operations no longer functions as an
in-kernel recovery context, resulting in kernel panics with the message:
"Machine check: Data load in unrecoverable area of kernel."
To address this, it is crucial to identify if an error context involves a
read operation from user memory. The function is_copy_from_user() can be
utilized to determine:
- the current operation is copy
- when reading user memory
When these conditions are met, is_copy_from_user() will return true,
confirming that it is indeed a direct copy from user memory. This check
is essential for correctly handling the context of errors in these
operations without relying on the extable fixup types that previously
allowed for in-kernel recovery.
So, use is_copy_from_user() to determine if a context is copy user directly.
Link: https://lkml.kernel.org/r/20250312112852.82415-1-xueshuai@linux.alibaba.com
Link: https://lkml.kernel.org/r/20250312112852.82415-2-xueshuai@linux.alibaba.com
Fixes: 4c132d1d84 ("x86/futex: Remove .fixup usage")
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Tony Luck <tony.luck@intel.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Ruidong Tian <tianruidong@linux.alibaba.com>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Yazen Ghannam <yazen.ghannam@amd.com>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The point where the memory is released from memblock to the buddy
allocator is hidden inside arch-specific mem_init()s and the call to
memblock_free_all() is needlessly duplicated in every artiste cure and
after introduction of arch_mm_preinit() hook, mem_init() implementation on
many architecture only contains the call to memblock_free_all().
Pull memblock_free_all() call into mm_core_init() and drop mem_init() on
relevant architectures to make it more explicit where the free memory is
released from memblock to the buddy allocator and to reduce code
duplication in architecture specific code.
Link: https://lkml.kernel.org/r/20250313135003.836600-14-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com> [x86]
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Tested-by: Mark Brown <broonie@kernel.org>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Guo Ren (csky) <guoren@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Russel King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently, implementation of mem_init() in every architecture consists of
one or more of the following:
* initializations that must run before page allocator is active, for
instance swiotlb_init()
* a call to memblock_free_all() to release all the memory to the buddy
allocator
* initializations that must run after page allocator is ready and there is
no arch-specific hook other than mem_init() for that, like for example
register_page_bootmem_info() in x86 and sparc64 or simple setting of
mem_init_done = 1 in several architectures
* a bunch of semi-related stuff that apparently had no better place to
live, for example a ton of BUILD_BUG_ON()s in parisc.
Introduce arch_mm_preinit() that will be the first thing called from
mm_core_init(). On architectures that have initializations that must happen
before the page allocator is ready, move those into arch_mm_preinit() along
with the code that does not depend on ordering with page allocator setup.
On several architectures this results in reduction of mem_init() to a
single call to memblock_free_all() that allows its consolidation next.
Link: https://lkml.kernel.org/r/20250313135003.836600-13-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com> [x86]
Tested-by: Mark Brown <broonie@kernel.org>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Guo Ren (csky) <guoren@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Russel King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
All architectures that support HIGHMEM have their code that frees high
memory pages to the buddy allocator while __free_memory_core() is limited
to freeing only low memory.
There is no actual reason for that. The memory map is completely ready by
the time memblock_free_all() is called and high pages can be released to
the buddy allocator along with low memory.
Remove low memory limit from __free_memory_core() and drop per-architecture
code that frees high memory pages.
Link: https://lkml.kernel.org/r/20250313135003.836600-12-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com> [x86]
Tested-by: Mark Brown <broonie@kernel.org>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Guo Ren (csky) <guoren@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Russel King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
high_memory defines upper bound on the directly mapped memory. This bound
is defined by the beginning of ZONE_HIGHMEM when a system has high memory
and by the end of memory otherwise.
All this is known to generic memory management initialization code that
can set high_memory while initializing core mm structures.
Add a generic calculation of high_memory to free_area_init() and remove
per-architecture calculation except for the architectures that set and use
high_memory earlier than that.
Link: https://lkml.kernel.org/r/20250313135003.836600-11-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com> [x86]
Tested-by: Mark Brown <broonie@kernel.org>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Guo Ren (csky) <guoren@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Russel King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
max_mapnr is essentially the size of the memory map for systems that use
FLATMEM. There is no reason to calculate it in each and every architecture
when it's anyway calculated in alloc_node_mem_map().
Drop setting of max_mapnr from architecture code and set it once in
alloc_node_mem_map().
While on it, move definition of mem_map and max_mapnr to mm/mm_init.c so
there won't be two copies for MMU and !MMU variants.
Link: https://lkml.kernel.org/r/20250313135003.836600-10-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com> [x86]
Tested-by: Mark Brown <broonie@kernel.org>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Guo Ren (csky) <guoren@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Russel King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Guest FPUs manage vCPU FPU states. They are allocated via
fpu_alloc_guest_fpstate() and are resized in fpstate_realloc() when XFD
features are enabled.
Since the introduction of guest FPUs, there have been inconsistencies in
the kernel buffer size and xfeatures:
1. fpu_alloc_guest_fpstate() uses fpu_user_cfg since its introduction. See:
69f6ed1d14 ("x86/fpu: Provide infrastructure for KVM FPU cleanup")
36487e6228 ("x86/fpu: Prepare guest FPU for dynamically enabled FPU features")
2. __fpstate_reset() references fpu_kernel_cfg to set storage attributes.
3. fpu->guest_perm uses fpu_kernel_cfg, affecting fpstate_realloc().
A recent commit in the tip:x86/fpu tree partially addressed the inconsistency
between (1) and (3) by using fpu_kernel_cfg for size calculation in (1),
but left fpu_guest->xfeatures and fpu_guest->perm still referencing
fpu_user_cfg:
https://lore.kernel.org/all/20250218141045.85201-1-stanspas@amazon.de/1937e18cc3 ("x86/fpu: Fix guest FPU state buffer allocation size")
The inconsistencies within fpu_alloc_guest_fpstate() and across the
mentioned functions cause confusion.
Fix them by using fpu_kernel_cfg consistently in fpu_alloc_guest_fpstate(),
except for fields related to the UABI buffer. Referencing fpu_kernel_cfg
won't impact functionalities, as:
1. fpu_guest->perm is overwritten shortly in fpu_init_guest_permissions()
with fpstate->guest_perm, which already uses fpu_kernel_cfg.
2. fpu_guest->xfeatures is solely used to check if XFD features are enabled.
Including supervisor xfeatures doesn't affect the check.
Fixes: 36487e6228 ("x86/fpu: Prepare guest FPU for dynamically enabled FPU features")
Suggested-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Chao Gao <chao.gao@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Link: https://lore.kernel.org/r/20250317140613.1761633-1-chao.gao@intel.com
The IBS software filter is filtering kernel samples for regular users in
the PMI handler. It checks the instruction address in the IBS register to
determine if it was in kernel mode or not.
But it turns out that it's possible to report a kernel data address even
if the instruction address belongs to user-space. Matteo Rizzo
found that when an instruction raises an exception, IBS can report some
kernel data addresses like IDT while holding the faulting instruction's
RIP. To prevent an information leak, it should double check if the data
address in PERF_SAMPLE_DATA is in the kernel space as well.
[ mingo: Clarified the changelog ]
Suggested-by: Matteo Rizzo <matteorizzo@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250317163755.1842589-1-namhyung@kernel.org
Tie together the %[xa] in the XSAVE/XRSTOR definitions with the
respective usage in the asm macros so that it is perfectly clear.
No functional changes.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
The CONFIG_X86_ESPFIX64 version of exc_double_fault() can return to its
caller, but the !CONFIG_X86_ESPFIX64 version never does. In the latter
case the compiler and/or objtool may consider it to be implicitly
noreturn.
However, due to the currently inflexible way objtool detects noreturns,
a function's noreturn status needs to be consistent across configs.
The current workaround for this issue is to suppress unreachable
warnings for exc_double_fault()'s callers. Unfortunately that can
result in ORC coverage gaps and potentially worse issues like inert
static calls and silently disabled CPU mitigations.
Instead, prevent exc_double_fault() from ever being implicitly marked
noreturn by forcing a return behind a never-taken conditional.
Until a more integrated noreturn detection method exists, this is likely
the least objectionable workaround.
Fixes: 55eeab2a8a ("objtool: Ignore exc_double_fault() __noreturn warnings")
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Brendan Jackman <jackmanb@google.com>
Link: https://lore.kernel.org/r/d1f4026f8dc35d0de6cc61f2684e0cb6484009d1.1741975349.git.jpoimboe@kernel.org
After __die_header(), __die_body() is always invoked. There we have
show_regs() -> show_regs_print_info() which prints the current
preemption model.
Remove it from the initial line.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250314160810.2373416-8-bigeasy@linutronix.de
The pmu specific data is saved in task_struct now. It doesn't need to
swap between context.
Remove swap_task_ctx() support.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250314172700.438923-6-kan.liang@linux.intel.com
In the system-wide mode, LBR callstacks are shorter in comparison to
the per-process mode.
LBR MSRs are reset during a context switch in the system-wide mode. For
the LBR call stack, the LBRs should be always saved/restored during a
context switch.
Use the space in task_struct to save/restore the LBR call stack data.
For a system-wide event, it's unnecessagy to update the
lbr_callstack_users for each threads. Add a variable in x86_pmu to
indicate whether the system-wide event is active.
Fixes: 76cb2c617f ("perf/x86/intel: Save/restore LBR stack during context switch")
Reported-by: Andi Kleen <ak@linux.intel.com>
Reported-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Debugged-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250314172700.438923-5-kan.liang@linux.intel.com
To save/restore LBR call stack data in system-wide mode, the task_struct
information is required.
Extend the parameters of sched_task() to supply task_struct information.
When schedule in, the LBR call stack data for new task will be restored.
When schedule out, the LBR call stack data for old task will be saved.
Only need to pass the required task_struct information.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250314172700.438923-4-kan.liang@linux.intel.com
No need for an 'else' statement after a 'return'.
[ mingo: Clarified the changelog ]
Signed-off-by: Peng Hao <flyingpeng@tencent.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: linux-kernel@vger.kernel.org
Commit 49147beb0c ("x86/xen: allow nesting of same lazy mode") was added
as a solution for a core-mm code change where
arch_[enter|leave]_lazy_mmu_mode() started to be called in a nested
manner; see commit bcc6cc8325 ("mm: add default definition of
set_ptes()").
However, now that we have fixed the API to avoid nesting, we no longer
need this capability in the x86 implementation.
Additionally, from code review, I don't believe the fix was ever robust in
the case of preemption occurring while in the nested lazy mode. The
implementation usually deals with preemption by calling
arch_leave_lazy_mmu_mode() from xen_start_context_switch() for the
outgoing task if we are in the lazy mmu mode. Then in
xen_end_context_switch(), it restarts the lazy mode by calling
arch_enter_lazy_mmu_mode() for an incoming task that was in the lazy mode
when it was switched out. But arch_leave_lazy_mmu_mode() will only unwind
a single level of nesting. If we are in the double nest, then it's not
fully unwound and per-cpu variables are left in a bad state.
So the correct solution is to remove the possibility of nesting from the
higher level (which has now been done) and remove this x86-specific
solution.
Link: https://lkml.kernel.org/r/20250303141542.3371656-6-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Juergen Gross <jgross@suse.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Juegren Gross <jgross@suse.com>
Cc: Matthew Wilcow (Oracle) <willy@infradead.org>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Platforms subscribe into generic ptdump implementation via GENERIC_PTDUMP.
But generic ptdump gets enabled via PTDUMP_CORE. These configs
combination is confusing as they sound very similar and does not
differentiate between platform's feature subscription and feature
enablement for ptdump. Rename the configs as ARCH_HAS_PTDUMP and PTDUMP
making it more clear and improve readability.
Link: https://lkml.kernel.org/r/20250226122404.1927473-6-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> (powerpc)
Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64]
Cc: Will Deacon <will@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Steven Price <steven.price@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
cmdline argument is not used in reserve_crashkernel_generic() so remove
it. Correspondingly, all the callers have been updated as well.
No functional change intended.
Link: https://lkml.kernel.org/r/20250131113830.925179-3-sourabhjain@linux.ibm.com
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Now that hugetlb bootmem pages are allocated earlier, and available for
section preinit (HVO-style), set ARCH_WANT_HUGETLB_VMEMMAP_PREINIT for
x86_64, so that is can be done.
This enables pre-HVO on x86_64.
Link: https://lkml.kernel.org/r/20250228182928.2645936-22-fvdl@google.com
Signed-off-by: Frank van der Linden <fvdl@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Roman Gushchin (Cruise) <roman.gushchin@linux.dev>
Cc: Usama Arif <usamaarif642@gmail.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Call hugetlb_bootmem_allloc in an earlier spot in setup, after
hugelb_cma_reserve. This will make vmemmap preinit of the sections
covered by the allocated hugetlb pages possible.
Link: https://lkml.kernel.org/r/20250228182928.2645936-21-fvdl@google.com
Signed-off-by: Frank van der Linden <fvdl@google.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Roman Gushchin (Cruise) <roman.gushchin@linux.dev>
Cc: Usama Arif <usamaarif642@gmail.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
register_page_bootmem_memmap expects that vmemmap pages handed to it are
PMD-mapped, and that the number of pages to call get_page_bootmem on is
PMD-aligned.
This is currently a correct assumption, but will no longer be true once
pre-HVO of hugetlb pages is implemented.
Make it handle PTE-mapped vmemmap pages and a nr_pages argument that is
not necessarily PAGES_PER_SECTION.
Link: https://lkml.kernel.org/r/20250228182928.2645936-9-fvdl@google.com
Signed-off-by: Frank van der Linden <fvdl@google.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Roman Gushchin (Cruise) <roman.gushchin@linux.dev>
Cc: Usama Arif <usamaarif642@gmail.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
ioremap_prot() currently accepts pgprot_val parameter as an unsigned long,
thus implicitly assuming that pgprot_val and pgprot_t could never be
bigger than unsigned long. But this assumption soon will not be true on
arm64 when using D128 pgtables. In 128 bit page table configuration,
unsigned long is 64 bit, but pgprot_t is 128 bit.
Passing platform abstracted pgprot_t argument is better as compared to
size based data types. Let's change the parameter to directly pass
pgprot_t like another similar helper generic_ioremap_prot().
Without this change in place, D128 configuration does not work on arm64 as
the top 64 bits gets silently stripped when passing the protection value
to this function.
Link: https://lkml.kernel.org/r/20250218101954.415331-1-anshuman.khandual@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Co-developed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This patch lays the groundwork for supporting batch PTE unmapping in
try_to_unmap_one(). It introduces range handling for TLB batch flushing,
with the range currently set to the size of PAGE_SIZE.
The function __flush_tlb_range_nosync() is architecture-specific and is
only used within arch/arm64. This function requires the mm structure
instead of the vma structure. To allow its reuse by
arch_tlbbatch_add_pending(), which operates with mm but not vma, this
patch modifies the argument of __flush_tlb_range_nosync() to take mm as
its parameter.
Link: https://lkml.kernel.org/r/20250214093015.51024-3-21cnbao@gmail.com
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shaoqin Huang <shahuang@redhat.com>
Cc: Gavin Shan <gshan@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Chis Li <chrisl@kernel.org>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Kairui Song <kasong@tencent.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mauricio Faria de Oliveira <mfo@canonical.com>
Cc: Tangquan Zheng <zhengtangquan@oppo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This patch declares percpu variables in __seg_gs/__seg_fs named AS and
keeps them named AS qualified until they are dereferenced with percpu
accessor. This approach enables various compiler check for
cross-namespace variable assignments.
Link: https://lkml.kernel.org/r/20250127160709.80604-7-ubizjak@gmail.com
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Acked-by: Nadav Amit <nadav.amit@gmail.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Waiman Long <longman@redhat.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use TYPEOF_UNQUAL() macro to declare the return type of *_cpu_ptr()
accessors in the generic named address space to avoid access to data from
pointer to non-enclosed address space type of errors.
Link: https://lkml.kernel.org/r/20250127160709.80604-5-ubizjak@gmail.com
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Acked-by: Nadav Amit <nadav.amit@gmail.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Waiman Long <longman@redhat.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use TYPEOF_UNQUAL() to declare variables as a corresponding type without
named address space qualifier to avoid "`__seg_gs' specified for auto
variable `var'" errors.
Link: https://lkml.kernel.org/r/20250127160709.80604-4-ubizjak@gmail.com
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Acked-by: Nadav Amit <nadav.amit@gmail.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: Waiman Long <longman@redhat.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Enable strict percpu address space checks", v4.
Enable strict percpu address space checks via x86 named address space
qualifiers. Percpu variables are declared in __seg_gs/__seg_fs named AS
and kept named AS qualified until they are dereferenced via percpu
accessor. This approach enables various compiler checks for
cross-namespace variable assignments.
Please note that current version of sparse doesn't know anything about
__typeof_unqual__() operator. Avoid the usage of __typeof_unqual__() when
sparse checking is active to prevent sparse errors with unknowing keyword.
The proposed patch by Dan Carpenter to implement __typeof_unqual__()
handling in sparse is located at:
https://lore.kernel.org/lkml/5b8d0dee-8fb6-45af-ba6c-7f74aff9a4b8@stanley.mountain/
This patch (of 6):
Use IS_ERR_PCPU() when checking the error pointer in the percpu address
space. This macro adds intermediate cast to unsigned long when switching
named address spaces.
The patch will avoid future build errors due to pointer address space
mismatch with enabled strict percpu address space checks.
Link: https://lkml.kernel.org/r/20250127160709.80604-1-ubizjak@gmail.com
Link: https://lkml.kernel.org/r/20250127160709.80604-2-ubizjak@gmail.com
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Acked-by: Nadav Amit <nadav.amit@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Waiman Long <longman@redhat.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Instead of generating the vmlinux.relocs file (needed by the
decompressor build to construct the KASLR relocation tables) as a
vmlinux postlink step, which is dubious because it depends on data that
is stripped from vmlinux before the build completes, generate it from
vmlinux.unstripped, which has been introduced specifically for this
purpose.
This ensures that each artifact is rebuilt as needed, rather than as a
side effect of another build rule.
This effectively reverts commit
9d9173e9ce ("x86/build: Avoid relocation information in final vmlinux")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The imperative paradigm used to build vmlinux, extract some info from it
or perform some checks on it, and subsequently modify it again goes
against the declarative paradigm that is usually employed for defining
make rules.
In particular, the Makefile.postlink files that consume their input via
an output rule result in some dodgy logic in the decompressor makefiles
for RISC-V and x86, given that the vmlinux.relocs input file needed to
generate the arch-specific relocation tables may not exist or be out of
date, but cannot be constructed using the ordinary Make dependency based
rules, because the info needs to be extracted while vmlinux is in its
ephemeral, non-stripped form.
So instead, for architectures that require the static relocations that
are emitted into vmlinux when passing --emit-relocs to the linker, and
are subsequently stripped out again, introduce an intermediate vmlinux
target called vmlinux.unstripped, and organize the reset of the build
logic accordingly:
- vmlinux.unstripped is created only once, and not updated again
- build rules under arch/*/boot can depend on vmlinux.unstripped without
running the risk of the data disappearing or being out of date
- the final vmlinux generated by the build is not bloated with static
relocations that are never needed again after the build completes.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Some architectures build vmlinux with static relocations preserved, but
strip them again from the final vmlinux image. Arch specific tools
consume these static relocations in order to construct relocation tables
for KASLR.
The fact that vmlinux is created, consumed and subsequently updated goes
against the typical, declarative paradigm used by Make, which is based
on rules and dependencies. So as a first step towards cleaning this up,
introduce a Kconfig symbol to declare that the arch wants to consume the
static relocations emitted into vmlinux. This will be wired up further
in subsequent patches.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The longest length of a symbol (KSYM_NAME_LEN) was increased to 512
in the reference [1]. This patch adds kunit test suite to check the longest
symbol length. These tests verify that the longest symbol length defined
is supported.
This test can also help other efforts for longer symbol length,
like [2].
The test suite defines one symbol with the longest possible length.
The first test verify that functions with names of the created
symbol, can be called or not.
The second test, verify that the symbols are created (or
not) in the kernel symbol table.
[1] https://lore.kernel.org/lkml/20220802015052.10452-6-ojeda@kernel.org/
[2] https://lore.kernel.org/lkml/20240605032120.3179157-1-song@kernel.org/
Link: https://lore.kernel.org/r/20250302221518.76874-1-sergio.collado@gmail.com
Tested-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Rae Moar <rmoar@google.com>
Signed-off-by: Sergio González Collado <sergio.collado@gmail.com>
Link: https://github.com/Rust-for-Linux/linux/issues/504
Reviewed-by: Rae Moar <rmoar@google.com>
Acked-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <shuah@kernel.org>
Kernel test robot reported "call without frame pointer save/setup"
warning in objtool. This will make stack traces unreliable on
CONFIG_UNWINDER_FRAME_POINTER=y, however it works on
CONFIG_UNWINDER_ORC=y. Fix this by creating a stack frame for the
function.
Fixes: 2fb761823e ("bpf, x86: Add x86 JIT support for timed may_goto")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202503071350.QOhsHVaW-lkp@intel.com/
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250315013039.1625048-1-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Recently we introduced BPF load-acquire (BPF_LOAD_ACQ) and store-release
(BPF_STORE_REL) instructions. For x86-64, simply implement them as
regular BPF_LDX/BPF_STX loads and stores. The verifier always rejects
misaligned load-acquires/store-releases (even if BPF_F_ANY_ALIGNMENT is
set), so emitted MOV* instructions are guaranteed to be atomic.
Arena accesses are supported. 8- and 16-bit load-acquires are
zero-extending (i.e., MOVZBQ, MOVZWQ).
Rename emit_atomic{,_index}() to emit_atomic_rmw{,_index}() to make it
clear that they only handle read-modify-write atomics, and extend their
@atomic_op parameter from u8 to u32, since we are starting to use more
than the lowest 8 bits of the 'imm' field.
Signed-off-by: Peilin Ye <yepeilin@google.com>
Link: https://lore.kernel.org/r/d22bb3c69f126af1d962b7314f3489eff606a3b7.1741049567.git.yepeilin@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Introduce BPF instructions with load-acquire and store-release
semantics, as discussed in [1]. Define 2 new flags:
#define BPF_LOAD_ACQ 0x100
#define BPF_STORE_REL 0x110
A "load-acquire" is a BPF_STX | BPF_ATOMIC instruction with the 'imm'
field set to BPF_LOAD_ACQ (0x100).
Similarly, a "store-release" is a BPF_STX | BPF_ATOMIC instruction with
the 'imm' field set to BPF_STORE_REL (0x110).
Unlike existing atomic read-modify-write operations that only support
BPF_W (32-bit) and BPF_DW (64-bit) size modifiers, load-acquires and
store-releases also support BPF_B (8-bit) and BPF_H (16-bit). As an
exception, however, 64-bit load-acquires/store-releases are not
supported on 32-bit architectures (to fix a build error reported by the
kernel test robot).
An 8- or 16-bit load-acquire zero-extends the value before writing it to
a 32-bit register, just like ARM64 instruction LDARH and friends.
Similar to existing atomic read-modify-write operations, misaligned
load-acquires/store-releases are not allowed (even if
BPF_F_ANY_ALIGNMENT is set).
As an example, consider the following 64-bit load-acquire BPF
instruction (assuming little-endian):
db 10 00 00 00 01 00 00 r0 = load_acquire((u64 *)(r1 + 0x0))
opcode (0xdb): BPF_ATOMIC | BPF_DW | BPF_STX
imm (0x00000100): BPF_LOAD_ACQ
Similarly, a 16-bit BPF store-release:
cb 21 00 00 10 01 00 00 store_release((u16 *)(r1 + 0x0), w2)
opcode (0xcb): BPF_ATOMIC | BPF_H | BPF_STX
imm (0x00000110): BPF_STORE_REL
In arch/{arm64,s390,x86}/net/bpf_jit_comp.c, have
bpf_jit_supports_insn(..., /*in_arena=*/true) return false for the new
instructions, until the corresponding JIT compiler supports them in
arena.
[1] https://lore.kernel.org/all/20240729183246.4110549-1-yepeilin@google.com/
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: kernel test robot <lkp@intel.com>
Signed-off-by: Peilin Ye <yepeilin@google.com>
Link: https://lore.kernel.org/r/a217f46f0e445fbd573a1a024be5c6bf1d5fe716.1741049567.git.yepeilin@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Implement the arch_bpf_timed_may_goto function using inline assembly to
have control over which registers are spilled, and use our special
protocol of using BPF_REG_AX as an argument into the function, and as
the return value when going back.
Emit call depth accounting for the call made from this stub, and ensure
we don't have naked returns (when rethunk mitigations are enabled) by
falling back to the RET macro (instead of retq). After popping all saved
registers, the return address into the BPF program should be on top of
the stack.
Since the JIT support is now enabled, ensure selftests which are
checking the produced may_goto sequences do not break by adjusting them.
Make sure we still test the old may_goto sequence on other
architectures, while testing the new sequence on x86_64.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250304003239.2390751-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Mark the src.virt.addr field in struct skcipher_walk as a pointer
to const data. This guarantees that the user won't modify the data
which should be done through dst.virt.addr to ensure that flushing
is done when necessary.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Rather than returning the address and storing the length into an
argument pointer, add an address field to the walk struct and use
that to store the address. The length is returned directly.
Change the done functions to use this stored address instead of
getting them from the caller.
Split the address into two using a union. The user should only
access the const version so that it is never changed.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now all the necessary code for TDX is in place, it's ready to run TDX
guest. Advertise the VM type of KVM_X86_TDX_VM so that the user space
VMM like QEMU can start to use it.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
---
TDX "the rest" v2:
- No change.
TDX "the rest" v1:
- Move down to the end of patch series.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Always honor guest PAT in KVM-managed EPTs on TDX enabled guests by
making self-snoop feature a hard dependency for TDX and making quirk
KVM_X86_QUIRK_IGNORE_GUEST_PAT not a valid quirk once TDX is enabled.
The quirk KVM_X86_QUIRK_IGNORE_GUEST_PAT only affects memory type of
KVM-managed EPTs. For the TDX-module-managed private EPT, memory type is
always forced to WB now.
Honoring guest PAT in KVM-managed EPTs ensures KVM does not invoke
kvm_zap_gfn_range() when attaching/detaching non-coherent DMA devices,
which would cause mirrored EPTs for TDs to be zapped, leading to the
TDX-module-managed private EPT being incorrectly zapped.
As a new feature, TDX always comes with support for self-snoop, and does
not have to worry about unmodifiable but buggy guests. So, simply ignore
KVM_X86_QUIRK_IGNORE_GUEST_PAT on TDX guests just like kvm-amd.ko already
does.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Message-ID: <20250224071039.31511-1-yan.y.zhao@intel.com>
[Only apply to TDX guests. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The IGNORE_GUEST_PAT quirk is inapplicable, and thus always-disabled,
if shadow_memtype_mask is zero. As long as vmx_get_mt_mask is not
called for the shadow paging case, there is no need to consult
shadow_memtype_mask and it can be removed altogether.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce an Intel specific quirk KVM_X86_QUIRK_IGNORE_GUEST_PAT to have
KVM ignore guest PAT when this quirk is enabled.
On AMD platforms, KVM always honors guest PAT. On Intel however there are
two issues. First, KVM *cannot* honor guest PAT if CPU feature self-snoop
is not supported. Second, UC access on certain Intel platforms can be very
slow[1] and honoring guest PAT on those platforms may break some old
guests that accidentally specify video RAM as UC. Those old guests may
never expect the slowness since KVM always forces WB previously. See [2].
So, introduce a quirk that KVM can enable by default on all Intel platforms
to avoid breaking old unmodifiable guests. Newer userspace can disable this
quirk if it wishes KVM to honor guest PAT; disabling the quirk will fail
if self-snoop is not supported, i.e. if KVM cannot obey the wish.
The quirk is a no-op on AMD and also if any assigned devices have
non-coherent DMA. This is not an issue, as KVM_X86_QUIRK_CD_NW_CLEARED is
another example of a quirk that is sometimes automatically disabled.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Link: https://lore.kernel.org/all/Ztl9NWCOupNfVaCA@yzhao56-desk.sh.intel.com # [1]
Link: https://lore.kernel.org/all/87jzfutmfc.fsf@redhat.com # [2]
Message-ID: <20250224070946.31482-1-yan.y.zhao@intel.com>
[Use supported_quirks/inapplicable_quirks to support both AMD and
no-self-snoop cases, as well as to remove the shadow_memtype_mask check
from kvm_mmu_may_ignore_guest_pat(). - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce supported_quirks in kvm_caps to store platform-specific force-enabled
quirks.
No functional changes intended.
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Message-ID: <20250224070832.31394-1-yan.y.zhao@intel.com>
[Remove unsupported quirks at KVM_ENABLE_CAP time. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In some cases, the handling of quirks is split between platform-specific
code and generic code, or it is done entirely in generic code, but the
relevant bug does not trigger on some platforms; for example,
this will be the case for "ignore guest PAT". Allow unaffected vendor
modules to disable handling of a quirk for all VMs via a new entry in
kvm_caps.
Such quirks remain available in KVM_CAP_DISABLE_QUIRKS2, because that API
tells userspace that KVM *knows* that some of its past behavior was bogus
or just undesirable. In other words, it's plausible for userspace to
refuse to run if a quirk is not listed by KVM_CAP_DISABLE_QUIRKS2, so
preserve that and make it part of the API.
As an example, mark KVM_X86_QUIRK_CD_NW_CLEARED as auto-disabled on
Intel systems.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allowing arbitrary re-enabling of quirks puts a limit on what the
quirks themselves can do, since you cannot assume that the quirk
prevents a particular state. More important, it also prevents
KVM from disabling a quirk at VM creation time, because userspace
can always go back and re-enable that.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allow TDX guests to access MTRR MSRs as what KVM does for normal VMs, i.e.,
KVM emulates accesses to MTRR MSRs, but doesn't virtualize guest MTRR
memory types.
TDX module exposes MTRR feature to TDX guests unconditionally. KVM needs
to support MTRR MSRs accesses for TDX guests to match the architectural
behavior.
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
Message-ID: <20250227012021.1778144-19-binbin.wu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Because guest TD memory is protected, VMM patching guest binary for
hypercall instruction isn't possible. Add a method to ignore hypercall
patching. Note: guest TD kernel needs to be modified to use
TDG.VP.VMCALL for hypercall.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
Message-ID: <20250227012021.1778144-18-binbin.wu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Because vmx_set_mce function is VMX specific and it cannot be used for TDX.
Add vt stub to ignore setting up mce for TDX.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
Message-ID: <20250227012021.1778144-17-binbin.wu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Skip instruction emulation and let the TDX guest retry for MMIO emulation
after installing the MMIO SPTE with suppress #VE bit cleared.
TDX protects TDX guest state from VMM, instructions in guest memory cannot
be emulated. MMIO emulation is the only case that triggers the instruction
emulation code path for TDX guest.
The MMIO emulation handling flow as following:
- The TDX guest issues a vMMIO instruction. (The GPA must be shared and is
not covered by KVM memory slot.)
- The default SPTE entry for shared-EPT by KVM has suppress #VE bit set. So
EPT violation causes TD exit to KVM.
- Trigger KVM page fault handler and install a new SPTE with suppress #VE
bit cleared.
- Skip instruction emulation and return X86EMU_RETRY_INSTR to let the vCPU
retry.
- TDX guest re-executes the vMMIO instruction.
- TDX guest gets #VE because KVM has cleared #VE suppress bit.
- TDX guest #VE handler converts MMIO into TDG.VP.VMCALL<MMIO>
Return X86EMU_RETRY_INSTR in the callback check_emulate_instruction() for
TDX guests to retry the MMIO instruction. Also, the instruction emulation
handling will be skipped, so that the callback check_intercept() will never
be called for TDX guest.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Co-developed-by: Binbin Wu <binbin.wu@linux.intel.com>
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
Message-ID: <20250227012021.1778144-14-binbin.wu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
TDX protects TDX guest state from VMM. Implement access methods for TDX
guest state to ignore them or return zero. Because those methods can be
called by kvm ioctls to set/get cpu registers, they don't have KVM_BUG_ON.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Co-developed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Co-developed-by: Binbin Wu <binbin.wu@linux.intel.com>
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
Message-ID: <20250227012021.1778144-13-binbin.wu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Implement TDG.VP.VMCALL<GetTdVmCallInfo> hypercall. If the input value is
zero, return success code and zero in output registers.
TDG.VP.VMCALL<GetTdVmCallInfo> hypercall is a subleaf of TDG.VP.VMCALL to
enumerate which TDG.VP.VMCALL sub leaves are supported. This hypercall is
for future enhancement of the Guest-Host-Communication Interface (GHCI)
specification. The GHCI version of 344426-001US defines it to require
input R12 to be zero and to return zero in output registers, R11, R12, R13,
and R14 so that guest TD enumerates no enhancement.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
Message-ID: <20250227012021.1778144-12-binbin.wu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allow TDX guest to configure LMCE (Local Machine Check Event) by handling
MSR IA32_FEAT_CTL and IA32_MCG_EXT_CTL.
MCE and MCA are advertised via cpuid based on the TDX module spec. Guest
kernel can access IA32_FEAT_CTL to check whether LMCE is opted-in by the
platform or not. If LMCE is opted-in by the platform, guest kernel can
access IA32_MCG_EXT_CTL to enable/disable LMCE.
Handle MSR IA32_FEAT_CTL and IA32_MCG_EXT_CTL for TDX guests to avoid
failure when a guest accesses them with TDG.VP.VMCALL<MSR> on #VE. E.g.,
Linux guest will treat the failure as a #GP(0).
Userspace VMM may not opt-in LMCE by default, e.g., QEMU disables it by
default, "-cpu lmce=on" is needed in QEMU command line to opt-in it.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
[binbin: rework changelog]
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
Message-ID: <20250227012021.1778144-11-binbin.wu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Morph PV RDMSR/WRMSR hypercall to EXIT_REASON_MSR_{READ,WRITE} and
wire up KVM backend functions.
For complete_emulated_msr() callback, instead of injecting #GP on error,
implement tdx_complete_emulated_msr() to set return code on error. Also
set return value on MSR read according to the values from kvm x86
registers.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20250227012021.1778144-10-binbin.wu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add functions to implement MSR related callbacks, .set_msr(), .get_msr(),
and .has_emulated_msr(), for preparation of handling hypercalls from TDX
guest for PV RDMSR and WRMSR. Ignore KVM_REQ_MSR_FILTER_CHANGED for TDX.
There are three classes of MSR virtualization for TDX.
- Non-configurable: TDX module directly virtualizes it. VMM can't configure
it, the value set by KVM_SET_MSRS is ignored.
- Configurable: TDX module directly virtualizes it. VMM can configure it at
VM creation time. The value set by KVM_SET_MSRS is used.
- #VE case: TDX guest would issue TDG.VP.VMCALL<INSTRUCTION.{WRMSR,RDMSR}>
and VMM handles the MSR hypercall. The value set by KVM_SET_MSRS is used.
For the MSRs belonging to the #VE case, the TDX module injects #VE to the
TDX guest upon RDMSR or WRMSR. The exact list of such MSRs is defined in
TDX Module ABI Spec.
Upon #VE, the TDX guest may call TDG.VP.VMCALL<INSTRUCTION.{WRMSR,RDMSR}>,
which are defined in GHCI (Guest-Host Communication Interface) so that the
host VMM (e.g. KVM) can virtualize the MSRs.
TDX doesn't allow VMM to configure interception of MSR accesses. Ignore
KVM_REQ_MSR_FILTER_CHANGED for TDX guest. If the userspace has set any
MSR filters, it will be applied when handling
TDG.VP.VMCALL<INSTRUCTION.{WRMSR,RDMSR}> in a later patch.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Co-developed-by: Binbin Wu <binbin.wu@linux.intel.com>
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20250227012021.1778144-9-binbin.wu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move KVM_MAX_MCE_BANKS to header file so that it can be used for TDX in
a future patch.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
[binbin: split into new patch]
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
Message-ID: <20250227012021.1778144-8-binbin.wu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Handle TDX PV HLT hypercall and the interrupt status due to it.
TDX guest status is protected, KVM can't get the interrupt status
of TDX guest and it assumes interrupt is always allowed unless TDX
guest calls TDVMCALL with HLT, which passes the interrupt blocked flag.
If the guest halted with interrupt enabled, also query pending RVI by
checking bit 0 of TD_VCPU_STATE_DETAILS_NON_ARCH field via a seamcall.
Update vt_interrupt_allowed() for TDX based on interrupt blocked flag
passed by HLT TDVMCALL. Do not wakeup TD vCPU if interrupt is blocked
for VT-d PI.
For NMIs, KVM cannot determine the NMI blocking status for TDX guests,
so KVM always assumes NMIs are not blocked. In the unlikely scenario
where a guest invokes the PV HLT hypercall within an NMI handler, this
could result in a spurious wakeup. The guest should implement the PV
HLT hypercall within a loop if it truly requires no interruptions, since
NMI could be unblocked by an IRET due to an exception occurring before
the PV HLT is executed in the NMI handler.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Co-developed-by: Binbin Wu <binbin.wu@linux.intel.com>
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
Message-ID: <20250227012021.1778144-7-binbin.wu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Handle TDX PV CPUID hypercall for the CPUIDs virtualized by VMM
according to TDX Guest Host Communication Interface (GHCI).
For TDX, most CPUID leaf/sub-leaf combinations are virtualized by
the TDX module while some trigger #VE. On #VE, TDX guest can issue
TDG.VP.VMCALL<INSTRUCTION.CPUID> (same value as EXIT_REASON_CPUID)
to request VMM to emulate CPUID operation.
Morph PV CPUID hypercall to EXIT_REASON_CPUID and wire up to the KVM
backend function.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
[binbin: rewrite changelog]
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
Message-ID: <20250227012021.1778144-6-binbin.wu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Kick off all vCPUs and prevent tdh_vp_enter() from executing whenever
tdh_mem_range_block()/tdh_mem_track()/tdh_mem_page_remove() encounters
contention, since the page removal path does not expect error and is less
sensitive to the performance penalty caused by kicking off vCPUs.
Although KVM has protected SEPT zap-related SEAMCALLs with kvm->mmu_lock,
KVM may still encounter TDX_OPERAND_BUSY due to the contention in the TDX
module.
- tdh_mem_track() may contend with tdh_vp_enter().
- tdh_mem_range_block()/tdh_mem_page_remove() may contend with
tdh_vp_enter() and TDCALLs.
Resources SHARED users EXCLUSIVE users
------------------------------------------------------------
TDCS epoch tdh_vp_enter tdh_mem_track
------------------------------------------------------------
SEPT tree tdh_mem_page_remove tdh_vp_enter (0-step mitigation)
tdh_mem_range_block
------------------------------------------------------------
SEPT entry tdh_mem_range_block (Host lock)
tdh_mem_page_remove (Host lock)
tdg_mem_page_accept (Guest lock)
tdg_mem_page_attr_rd (Guest lock)
tdg_mem_page_attr_wr (Guest lock)
Use a TDX specific per-VM flag wait_for_sept_zap along with
KVM_REQ_OUTSIDE_GUEST_MODE to kick off vCPUs and prevent them from entering
TD, thereby avoiding the potential contention. Apply the kick-off and no
vCPU entering only after each SEAMCALL busy error to minimize the window of
no TD entry, as the contention due to 0-step mitigation or TDCALLs is
expected to be rare.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Message-ID: <20250227012021.1778144-5-binbin.wu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Retry locally in the TDX EPT violation handler for private memory to reduce
the chances for tdh_mem_sept_add()/tdh_mem_page_aug() to contend with
tdh_vp_enter().
TDX EPT violation installs private pages via tdh_mem_sept_add() and
tdh_mem_page_aug(). The two may have contention with tdh_vp_enter() or
TDCALLs.
Resources SHARED users EXCLUSIVE users
------------------------------------------------------------
SEPT tree tdh_mem_sept_add tdh_vp_enter(0-step mitigation)
tdh_mem_page_aug
------------------------------------------------------------
SEPT entry tdh_mem_sept_add (Host lock)
tdh_mem_page_aug (Host lock)
tdg_mem_page_accept (Guest lock)
tdg_mem_page_attr_rd (Guest lock)
tdg_mem_page_attr_wr (Guest lock)
Though the contention between tdh_mem_sept_add()/tdh_mem_page_aug() and
TDCALLs may be removed in future TDX module, their contention with
tdh_vp_enter() due to 0-step mitigation still persists.
The TDX module may trigger 0-step mitigation in SEAMCALL TDH.VP.ENTER,
which works as follows:
0. Each TDH.VP.ENTER records the guest RIP on TD entry.
1. When the TDX module encounters a VM exit with reason EPT_VIOLATION, it
checks if the guest RIP is the same as last guest RIP on TD entry.
-if yes, it means the EPT violation is caused by the same instruction
that caused the last VM exit.
Then, the TDX module increases the guest RIP no-progress count.
When the count increases from 0 to the threshold (currently 6),
the TDX module records the faulting GPA into a
last_epf_gpa_list.
-if no, it means the guest RIP has made progress.
So, the TDX module resets the RIP no-progress count and the
last_epf_gpa_list.
2. On the next TDH.VP.ENTER, the TDX module (after saving the guest RIP on
TD entry) checks if the last_epf_gpa_list is empty.
-if yes, TD entry continues without acquiring the lock on the SEPT tree.
-if no, it triggers the 0-step mitigation by acquiring the exclusive
lock on SEPT tree, walking the EPT tree to check if all page
faults caused by the GPAs in the last_epf_gpa_list have been
resolved before continuing TD entry.
Since KVM TDP MMU usually re-enters guest whenever it exits to userspace
(e.g. for KVM_EXIT_MEMORY_FAULT) or encounters a BUSY, it is possible for a
tdh_vp_enter() to be called more than the threshold count before a page
fault is addressed, triggering contention when tdh_vp_enter() attempts to
acquire exclusive lock on SEPT tree.
Retry locally in TDX EPT violation handler to reduce the count of invoking
tdh_vp_enter(), hence reducing the possibility of its contention with
tdh_mem_sept_add()/tdh_mem_page_aug(). However, the 0-step mitigation and
the contention are still not eliminated due to KVM_EXIT_MEMORY_FAULT,
signals/interrupts, and cases when one instruction faults more GFNs than
the threshold count.
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Message-ID: <20250227012021.1778144-4-binbin.wu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Detect SEPT violations that occur when an SEPT entry is in PENDING state
while the TD is configured not to receive #VE on SEPT violations.
A TD guest can be configured not to receive #VE by setting SEPT_VE_DISABLE
to 1 in tdh_mng_init() or modifying pending_ve_disable to 1 in TDCS when
flexible_pending_ve is permitted. In such cases, the TDX module will not
inject #VE into the TD upon encountering an EPT violation caused by an SEPT
entry in the PENDING state. Instead, TDX module will exit to VMM and set
extended exit qualification type to PENDING_EPT_VIOLATION and exit
qualification bit 6:3 to 0.
Since #VE will not be injected to such TDs, they are not able to be
notified to accept a GPA. TD accessing before accepting a private GPA
is regarded as an error within the guest.
Detect such guest error by inspecting the (extended) exit qualification
bits and make such VM dead.
Cc: Xiaoyao Li <xiaoyao.li@intel.com>
Cc: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
Message-ID: <20250227012021.1778144-3-binbin.wu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For TDX, on EPT violation, call common __vmx_handle_ept_violation() to
trigger x86 MMU code; on EPT misconfiguration, bug the VM since it
shouldn't happen.
EPT violation due to instruction fetch should never be triggered from
shared memory in TDX guest. If such EPT violation occurs, treat it as
broken hardware.
EPT misconfiguration shouldn't happen on neither shared nor secure EPT for
TDX guests.
- TDX module guarantees no EPT misconfiguration on secure EPT. Per TDX
module v1.5 spec section 9.4 "Secure EPT Induced TD Exits":
"By design, since secure EPT is fully controlled by the TDX module, an
EPT misconfiguration on a private GPA indicates a TDX module bug and is
handled as a fatal error."
- For shared EPT, the MMIO caching optimization, which is the only case
where current KVM configures EPT entries to generate EPT
misconfiguration, is implemented in a different way for TDX guests. KVM
configures EPT entries to non-present value without suppressing #VE bit.
It causes #VE in the TDX guest and the guest will call TDG.VP.VMCALL to
request MMIO emulation.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Co-developed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
[binbin: rework changelog]
Co-developed-by: Binbin Wu <binbin.wu@linux.intel.com>
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
Message-ID: <20250227012021.1778144-2-binbin.wu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Handle VM exit caused by "other SMI" for TDX, by returning back to
userspace for Machine Check System Management Interrupt (MSMI) case or
ignoring it and resume vCPU for non-MSMI case.
For VMX, SMM transition can happen in both VMX non-root mode and VMX
root mode. Unlike VMX, in SEAM root mode (TDX module), all interrupts
are blocked. If an SMI occurs in SEAM non-root mode (TD guest), the SMI
causes VM exit to TDX module, then SEAMRET to KVM. Once it exits to KVM,
SMI is delivered and handled by kernel handler right away.
An SMI can be "I/O SMI" or "other SMI". For TDX, there will be no I/O SMI
because I/O instructions inside TDX guest trigger #VE and TDX guest needs
to use TDVMCALL to request VMM to do I/O emulation.
For "other SMI", there are two cases:
- MSMI case. When BIOS eMCA MCE-SMI morphing is enabled, the #MC occurs in
TDX guest will be delivered as an MSMI. It causes an
EXIT_REASON_OTHER_SMI VM exit with MSMI (bit 0) set in the exit
qualification. On VM exit, TDX module checks whether the "other SMI" is
caused by an MSMI or not. If so, TDX module marks TD as fatal,
preventing further TD entries, and then completes the TD exit flow to KVM
with the TDH.VP.ENTER outputs indicating TDX_NON_RECOVERABLE_TD. After
TD exit, the MSMI is delivered and eventually handled by the kernel
machine check handler (7911f145de x86/mce: Implement recovery for
errors in TDX/SEAM non-root mode), i.e., the memory page is marked as
poisoned and it won't be freed to the free list when the TDX guest is
terminated. Since the TDX guest is dead, follow other non-recoverable
cases, exit to userspace.
- For non-MSMI case, KVM doesn't need to do anything, just continue TDX
vCPU execution.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Co-developed-by: Binbin Wu <binbin.wu@linux.intel.com>
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20250222014757.897978-17-binbin.wu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Handle EXCEPTION_NMI and EXTERNAL_INTERRUPT exits for TDX.
NMI Handling: Just like the VMX case, NMI remains blocked after exiting
from TDX guest for NMI-induced exits [*]. Handle NMI-induced exits for
TDX guests in the same way as they are handled for VMX guests, i.e.,
handle NMI in tdx_vcpu_enter_exit() by calling the vmx_handle_nmi()
helper.
Interrupt and Exception Handling: Similar to the VMX case, external
interrupts and exceptions (machine check is the only exception type
KVM handles for TDX guests) are handled in the .handle_exit_irqoff()
callback.
For other exceptions, because TDX guest state is protected, exceptions in
TDX guests can't be intercepted. TDX VMM isn't supposed to handle these
exceptions. If unexpected exception occurs, exit to userspace with
KVM_EXIT_EXCEPTION.
For external interrupt, increase the statistics, same as the VMX case.
[*]: Some old TDX modules have a bug which makes NMI unblocked after
exiting from TDX guest for NMI-induced exits. This could potentially
lead to nested NMIs: a new NMI arrives when KVM is manually calling the
host NMI handler. This is an architectural violation, but it doesn't
have real harm until FRED is enabled together with TDX (for non-FRED,
the host NMI handler can handle nested NMIs). Given this is rare to
happen and has no real harm, ignore this for the initial TDX support.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Co-developed-by: Binbin Wu <binbin.wu@linux.intel.com>
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20250222014757.897978-16-binbin.wu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a helper to handles NMI exit.
TDX handles the NMI exit the same as VMX case. Add a helper to share the
code with TDX, expose the helper in common.h.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Co-developed-by: Binbin Wu <binbin.wu@linux.intel.com>
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
Message-ID: <20250222014757.897978-15-binbin.wu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move emulation_required from struct vcpu_vmx to struct vcpu_vt so that
vmx_handle_exit_irqoff() can be reused by TDX code.
No functional change intended.
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
Message-ID: <20250222014757.897978-14-binbin.wu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
TDX protects TDX guest APIC state from VMM. Implement access methods of
TDX guest vAPIC state to ignore them or return zero.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
Message-ID: <20250222014757.897978-13-binbin.wu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Force APICv active for TDX guests in KVM because APICv is always enabled
by TDX module.
From the view of KVM, whether APICv state is active or not is decided by:
1. APIC is hw enabled
2. VM and vCPU have no inhibit reasons set.
After TDX vCPU init, APIC is set to x2APIC mode. KVM_SET_{SREGS,SREGS2} are
rejected due to has_protected_state for TDs and guest_state_protected
for TDX vCPUs are set. Reject KVM_{GET,SET}_LAPIC from userspace since
migration is not supported yet, so that userspace cannot disable APIC.
For various APICv inhibit reasons:
- APICV_INHIBIT_REASON_DISABLED is impossible after checking enable_apicv
in tdx_bringup(). If !enable_apicv, TDX support will be disabled.
- APICV_INHIBIT_REASON_PHYSICAL_ID_ALIASED is impossible since x2APIC is
mandatory, KVM emulates APIC_ID as read-only for x2APIC mode. (Note:
APICV_INHIBIT_REASON_PHYSICAL_ID_ALIASED could be set if the memory
allocation fails for KVM apic_map.)
- APICV_INHIBIT_REASON_HYPERV is impossible since TDX doesn't support
HyperV guest yet.
- APICV_INHIBIT_REASON_ABSENT is impossible since in-kernel LAPIC is
checked in tdx_vcpu_create().
- APICV_INHIBIT_REASON_BLOCKIRQ is impossible since TDX doesn't support
KVM_SET_GUEST_DEBUG.
- APICV_INHIBIT_REASON_APIC_ID_MODIFIED is impossible since x2APIC is
mandatory.
- APICV_INHIBIT_REASON_APIC_BASE_MODIFIED is impossible since KVM rejects
userspace to set APIC base.
- The rest inhibit reasons are relevant only to AMD's AVIC, including
APICV_INHIBIT_REASON_NESTED, APICV_INHIBIT_REASON_IRQWIN,
APICV_INHIBIT_REASON_PIT_REINJ, APICV_INHIBIT_REASON_SEV, and
APICV_INHIBIT_REASON_LOGICAL_ID_ALIASED.
(For APICV_INHIBIT_REASON_PIT_REINJ, similar to AVIC, KVM can't intercept
EOI for TDX guests neither, but KVM enforces KVM_IRQCHIP_SPLIT for TDX
guests, which eliminates the in-kernel PIT.)
Implement vt_refresh_apicv_exec_ctrl() to call KVM_BUG_ON() if APICv is
disabled for TDX guests.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Co-developed-by: Binbin Wu <binbin.wu@linux.intel.com>
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
Message-ID: <20250222014757.897978-12-binbin.wu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Enforce KVM_IRQCHIP_SPLIT for TDX guests to disallow in-kernel I/O APIC
while in-kernel local APIC is needed.
APICv is always enabled by TDX module and TDX Module doesn't allow the
hypervisor to modify the EOI-bitmap, i.e. all EOIs are accelerated and
never trigger exits. Level-triggered interrupts and other things depending
on EOI VM-Exit can't be faithfully emulated in KVM. Also, the lazy check
of pending APIC EOI for RTC edge-triggered interrupts, which was introduced
as a workaround when EOI cannot be intercepted, doesn't work for TDX either
because kvm_apic_pending_eoi() checks vIRR and vISR, but both values are
invisible in KVM.
If the guest induces generation of a level-triggered interrupt, the VMM is
left with the choice of dropping the interrupt, sending it as-is, or
converting it to an edge-triggered interrupt. Ditto for KVM. All of those
options will make the guest unhappy. There's no architectural behavior KVM
can provide that's better than sending the interrupt and hoping for the
best.
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
Message-ID: <20250222014757.897978-11-binbin.wu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Always block INIT and SIPI events for the TDX guest because the TDX module
doesn't provide API for VMM to inject INIT IPI or SIPI.
TDX defines its own vCPU creation and initialization sequence including
multiple seamcalls. Also, it's only allowed during TD build time.
Given that TDX guest is para-virtualized to boot BSP/APs, normally there
shouldn't be any INIT/SIPI event for TDX guest. If any, three options to
handle them:
1. Always block INIT/SIPI request.
2. (Silently) ignore INIT/SIPI request during delivery.
3. Return error to guest TDs somehow.
Choose option 1 for simplicity. Since INIT and SIPI are always blocked,
INIT handling and the OP vcpu_deliver_sipi_vector() won't be called, no
need to add new interface or helper function for INIT/SIPI delivery.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Co-developed-by: Binbin Wu <binbin.wu@linux.intel.com>
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
Message-ID: <20250222014757.897978-10-binbin.wu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Handle SMI request as what KVM does for CONFIG_KVM_SMM=n, i.e. return
-ENOTTY, and add KVM_BUG_ON() to SMI related OPs for TD.
TDX doesn't support system-management mode (SMM) and system-management
interrupt (SMI) in guest TDs. Because guest state (vCPU state, memory
state) is protected, it must go through the TDX module APIs to change
guest state. However, the TDX module doesn't provide a way for VMM to
inject SMI into guest TD or a way for VMM to switch guest vCPU mode into
SMM.
MSR_IA32_SMBASE will not be emulated for TDX guest, -ENOTTY will be
returned when SMI is requested.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Co-developed-by: Binbin Wu <binbin.wu@linux.intel.com>
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
Message-ID: <20250222014757.897978-9-binbin.wu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Inject NMI to TDX guest by setting the PEND_NMI TDVPS field to 1, i.e. make
the NMI pending in the TDX module. If there is a further pending NMI in
KVM, collapse it to the one pending in the TDX module.
VMM can request the TDX module to inject a NMI into a TDX vCPU by setting
the PEND_NMI TDVPS field to 1. Following that, VMM can call TDH.VP.ENTER
to run the vCPU and the TDX module will attempt to inject the NMI as soon
as possible.
KVM has the following 3 cases to inject two NMIs when handling simultaneous
NMIs and they need to be injected in a back-to-back way. Otherwise, OS
kernel may fire a warning about the unknown NMI [1]:
K1. One NMI is being handled in the guest and one NMI pending in KVM.
KVM requests NMI window exit to inject the pending NMI.
K2. Two NMIs are pending in KVM.
KVM injects the first NMI and requests NMI window exit to inject the
second NMI.
K3. A previous NMI needs to be rejected and one NMI pending in KVM.
KVM first requests force immediate exit followed by a VM entry to
complete the NMI rejection. Then, during the force immediate exit, KVM
requests NMI window exit to inject the pending NMI.
For TDX, PEND_NMI TDVPS field is a 1-bit field, i.e. KVM can only pend one
NMI in the TDX module. Also, the vCPU state is protected, KVM doesn't know
the NMI blocking states of TDX vCPU, KVM has to assume NMI is always
unmasked and allowed. When KVM sees PEND_NMI is 1 after a TD exit, it
means the previous NMI needs to be re-injected.
Based on KVM's NMI handling flow, there are following 6 cases:
In NMI handler TDX module KVM
T1. No PEND_NMI=0 1 pending NMI
T2. No PEND_NMI=0 2 pending NMIs
T3. No PEND_NMI=1 1 pending NMI
T4. Yes PEND_NMI=0 1 pending NMI
T5. Yes PEND_NMI=0 2 pending NMIs
T6. Yes PEND_NMI=1 1 pending NMI
K1 is mapped to T4.
K2 is mapped to T2 or T5.
K3 is mapped to T3 or T6.
Note: KVM doesn't know whether NMI is blocked by a NMI or not, case T5 and
T6 can happen.
When handling pending NMI in KVM for TDX guest, what KVM can do is to add a
pending NMI in TDX module when PEND_NMI is 0. T1 and T4 can be handled by
this way. However, TDX doesn't allow KVM to request NMI window exit
directly, if PEND_NMI is already set and there is still pending NMI in KVM,
the only way KVM could try is to request a force immediate exit. But for
case T5 and T6, force immediate exit will result in infinite loop because
force immediate exit makes it no progress in the NMI handler, so that the
pending NMI in the TDX module can never be injected.
Considering on X86 bare metal, multiple NMIs could collapse into one NMI,
e.g. when NMI is blocked by SMI. It's OS's responsibility to poll all NMI
sources in the NMI handler to avoid missing handling of some NMI events.
Based on that, for the above 3 cases (K1-K3), only case K1 must inject the
second NMI because the guest NMI handler may have already polled some of
the NMI sources, which could include the source of the pending NMI, the
pending NMI must be injected to avoid the lost of NMI. For case K2 and K3,
the guest OS will poll all NMI sources (including the sources caused by the
second NMI and further NMI collapsed) when the delivery of the first NMI,
KVM doesn't have the necessity to inject the second NMI.
To handle the NMI injection properly for TDX, there are two options:
- Option 1: Modify the KVM's NMI handling common code, to collapse the
second pending NMI for K2 and K3.
- Option 2: Do it in TDX specific way. When the previous NMI is still
pending in the TDX module, i.e. it has not been delivered to TDX guest
yet, collapse the pending NMI in KVM into the previous one.
This patch goes with option 2 because it is simple and doesn't impact other
VM types. Option 1 may need more discussions.
This is the first need to access vCPU scope metadata in the "management"
class. Make needed accessors available.
[1] https://lore.kernel.org/all/1317409584-23662-5-git-send-email-dzickus@redhat.com/
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Co-developed-by: Binbin Wu <binbin.wu@linux.intel.com>
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20250222014757.897978-8-binbin.wu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Call kvm_wait_lapic_expire() when POSTED_INTR_ON is set and the vector
for LVTT is set in PIR before TD entry.
KVM always assumes a timer IRQ was injected if APIC state is protected.
For TDX guest, APIC state is protected and KVM injects timer IRQ via posted
interrupt. To avoid unnecessary wait calls, only call
kvm_wait_lapic_expire() when a timer IRQ was injected, i.e., POSTED_INTR_ON
is set and the vector for LVTT is set in PIR.
Add a helper to test PIR.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Co-developed-by: Binbin Wu <binbin.wu@linux.intel.com>
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
Message-ID: <20250222014757.897978-7-binbin.wu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If APIC state is protected, i.e. the vCPU is a TDX guest, assume a timer
IRQ was injected when deciding whether or not to busy wait in the "timer
advanced" path. The "real" vIRR is not readable/writable, so trying to
query for a pending timer IRQ will return garbage.
Note, TDX can scour the PIR if it wants to be more precise and skip the
"wait" call entirely.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
Message-ID: <20250222014757.897978-6-binbin.wu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Implement non-NMI interrupt injection for TDX via posted interrupt.
As CPU state is protected and APICv is enabled for the TDX guest, TDX
supports non-NMI interrupt injection only by posted interrupt. Posted
interrupt descriptors (PIDs) are allocated in shared memory, KVM can
update them directly. If target vCPU is in non-root mode, send posted
interrupt notification to the vCPU and hardware will sync PIR to vIRR
atomically. Otherwise, kick it to pick up the interrupt from PID. To
post pending interrupts in the PID, KVM can generate a self-IPI with
notification vector prior to TD entry.
Since the guest status of TD vCPU is protected, assume interrupt is
always allowed. Ignore the code path for event injection mechanism or
LAPIC emulation for TDX.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Co-developed-by: Binbin Wu <binbin.wu@linux.intel.com>
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20250222014757.897978-5-binbin.wu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move posted interrupt delivery code to common header so that TDX can
leverage it.
No functional change intended.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
[binbin: split into new patch]
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
Reviewed-by: Chao Gao <chao.gao@intel.com>
Message-ID: <20250222014757.897978-4-binbin.wu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Disable PI wakeup for IPI virtualization (IPIv) case for TDX.
When a vCPU is being scheduled out, notification vector is switched and
pi_wakeup_handler() is enabled when the vCPU has interrupt enabled and
posted interrupt is used to wake up the vCPU.
For VMX, a blocked vCPU can be the target of posted interrupts when using
IPIv or VT-d PI. TDX doesn't support IPIv, disable PI wakeup for IPIv.
Also, since the guest status of TD vCPU is protected, assume interrupt is
always enabled for TD. (PV HLT hypercall is not support yet, TDX guest
tells VMM whether HLT is called with interrupt disabled or not.)
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
[binbin: split into new patch]
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
Message-ID: <20250222014757.897978-3-binbin.wu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add flag and hook to KVM's local APIC management to support determining
whether or not a TDX guest has a pending IRQ. For TDX vCPUs, the virtual
APIC page is owned by the TDX module and cannot be accessed by KVM. As a
result, registers that are virtualized by the CPU, e.g. PPR, cannot be
read or written by KVM. To deliver interrupts for TDX guests, KVM must
send an IRQ to the CPU on the posted interrupt notification vector. And
to determine if TDX vCPU has a pending interrupt, KVM must check if there
is an outstanding notification.
Return "no interrupt" in kvm_apic_has_interrupt() if the guest APIC is
protected to short-circuit the various other flows that try to pull an
IRQ out of the vAPIC, the only valid operation is querying _if_ an IRQ is
pending, KVM can't do anything based on _which_ IRQ is pending.
Intentionally omit sanity checks from other flows, e.g. PPR update, so as
not to degrade non-TDX guests with unnecessary checks. A well-behaved KVM
and userspace will never reach those flows for TDX guests, but reaching
them is not fatal if something does go awry.
For the TD exits not due to HLT TDCALL, skip checking RVI pending in
tdx_protected_apic_has_interrupt(). Except for the guest being stupid
(e.g., non-HLT TDCALL in an interrupt shadow), it's not even possible to
have an interrupt in RVI that is fully unmasked. There is no any CPU flows
that modify RVI in the middle of instruction execution. I.e. if RVI is
non-zero, then either the interrupt has been pending since before the TD
exit, or the instruction caused the TD exit is in an STI/SS shadow. KVM
doesn't care about STI/SS shadows outside of the HALTED case. And if the
interrupt was pending before TD exit, then it _must_ be blocked, otherwise
the interrupt would have been serviced at the instruction boundary.
For the HLT TDCALL case, it will be handled in a future patch when HLT
TDCALL is supported.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
Message-ID: <20250222014757.897978-2-binbin.wu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Handle TDX PV MMIO hypercall when TDX guest calls TDVMCALL with the
leaf #VE.RequestMMIO (same value as EXIT_REASON_EPT_VIOLATION) according
to TDX Guest Host Communication Interface (GHCI) spec.
For TDX guests, VMM is not allowed to access vCPU registers and the private
memory, and the code instructions must be fetched from the private memory.
So MMIO emulation implemented for non-TDX VMs is not possible for TDX
guests.
In TDX the MMIO regions are instead configured by VMM to trigger a #VE
exception in the guest. The #VE handling is supposed to emulate the MMIO
instruction inside the guest and convert it into a TDVMCALL with the
leaf #VE.RequestMMIO, which equals to EXIT_REASON_EPT_VIOLATION.
The requested MMIO address must be in shared GPA space. The shared bit
is stripped after check because the existing code for MMIO emulation is
not aware of the shared bit.
The MMIO GPA shouldn't have a valid memslot, also the attribute of the GPA
should be shared. KVM could do the checks before exiting to userspace,
however, even if KVM does the check, there still will be race conditions
between the check in KVM and the emulation of MMIO access in userspace due
to a memslot hotplug, or a memory attribute conversion. If userspace
doesn't check the attribute of the GPA and the attribute happens to be
private, it will not pose a security risk or cause an MCE, but it can lead
to another issue. E.g., in QEMU, treating a GPA with private attribute as
shared when it falls within RAM's range can result in extra memory
consumption during the emulation to the access to the HVA of the GPA.
There are two options: 1) Do the check both in KVM and userspace. 2) Do
the check only in QEMU. This patch chooses option 2, i.e. KVM omits the
memslot and attribute checks, and expects userspace to do the checks.
Similar to normal MMIO emulation, try to handle the MMIO in kernel first,
if kernel can't support it, forward the request to userspace. Export
needed symbols used for MMIO handling.
Fragments handling is not needed for TDX PV MMIO because GPA is provided,
if a MMIO access crosses page boundary, it should be continuous in GPA.
Also, the size is limited to 1, 2, 4, 8 bytes. No further split needed.
Allow cross page access because no extra handling needed after checking
both start and end GPA are shared GPAs.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Co-developed-by: Binbin Wu <binbin.wu@linux.intel.com>
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20250222014225.897298-10-binbin.wu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Emulate port I/O requested by TDX guest via TDVMCALL with leaf
Instruction.IO (same value as EXIT_REASON_IO_INSTRUCTION) according to
TDX Guest Host Communication Interface (GHCI).
All port I/O instructions inside the TDX guest trigger the #VE exception.
On #VE triggered by I/O instructions, TDX guest can call TDVMCALL with
leaf Instruction.IO to request VMM to emulate I/O instructions.
Similar to normal port I/O emulation, try to handle the port I/O in kernel
first, if kernel can't support it, forward the request to userspace.
Note string I/O operations are not supported in TDX. Guest should unroll
them before calling the TDVMCALL.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Co-developed-by: Binbin Wu <binbin.wu@linux.intel.com>
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20250222014225.897298-9-binbin.wu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert TDG.VP.VMCALL<ReportFatalError> to KVM_EXIT_SYSTEM_EVENT with
a new type KVM_SYSTEM_EVENT_TDX_FATAL and forward it to userspace for
handling.
TD guest can use TDG.VP.VMCALL<ReportFatalError> to report the fatal
error it has experienced. This hypercall is special because TD guest
is requesting a termination with the error information, KVM needs to
forward the hypercall to userspace anyway, KVM doesn't do parsing or
conversion, it just dumps the 16 general-purpose registers to userspace
and let userspace decide what to do.
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
Message-ID: <20250222014225.897298-8-binbin.wu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert TDG.VP.VMCALL<MapGPA> to KVM_EXIT_HYPERCALL with
KVM_HC_MAP_GPA_RANGE and forward it to userspace for handling.
MapGPA is used by TDX guest to request to map a GPA range as private
or shared memory. It needs to exit to userspace for handling. KVM has
already implemented a similar hypercall KVM_HC_MAP_GPA_RANGE, which will
exit to userspace with exit reason KVM_EXIT_HYPERCALL. Do sanity checks,
convert TDVMCALL_MAP_GPA to KVM_HC_MAP_GPA_RANGE and forward the request
to userspace.
To prevent a TDG.VP.VMCALL<MapGPA> call from taking too long, the MapGPA
range is split into 2MB chunks and check interrupt pending between chunks.
This allows for timely injection of interrupts and prevents issues with
guest lockup detection. TDX guest should retry the operation for the
GPA starting at the address specified in R11 when the TDVMCALL return
TDVMCALL_RETRY as status code.
Note userspace needs to enable KVM_CAP_EXIT_HYPERCALL with
KVM_HC_MAP_GPA_RANGE bit set for TD VM.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
Message-ID: <20250222014225.897298-7-binbin.wu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Handle KVM hypercall for TDX according to TDX Guest-Host Communication
Interface (GHCI) specification.
The TDX GHCI specification defines the ABI for the guest TD to issue
hypercalls. When R10 is non-zero, it indicates the TDG.VP.VMCALL is
vendor-specific. KVM uses R10 as KVM hypercall number and R11-R14
as 4 arguments, while the error code is returned in R10.
Morph the TDG.VP.VMCALL with KVM hypercall to EXIT_REASON_VMCALL and
marshall r10~r14 from vp_enter_args to the appropriate x86 registers for
KVM hypercall handling.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Co-developed-by: Binbin Wu <binbin.wu@linux.intel.com>
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
Message-ID: <20250222014225.897298-6-binbin.wu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a place holder and related helper functions for preparation of
TDG.VP.VMCALL handling.
The TDX module specification defines TDG.VP.VMCALL API (TDVMCALL for short)
for the guest TD to call hypercall to VMM. When the guest TD issues a
TDVMCALL, the guest TD exits to VMM with a new exit reason. The arguments
from the guest TD and returned values from the VMM are passed in the guest
registers. The guest RCX register indicates which registers are used.
Define helper functions to access those registers.
A new VMX exit reason TDCALL is added to indicate the exit is due to
TDVMCALL from the guest TD. Define the TDCALL exit reason and add a place
holder to handle such exit.
Some leafs of TDCALL will be morphed to another VMX exit reason instead of
EXIT_REASON_TDCALL, add a helper tdcall_to_vmx_exit_reason() as a place
holder to do the conversion.
Suggested-by: Sean Christopherson <seanjc@google.com>
Co-developed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Co-developed-by: Binbin Wu <binbin.wu@linux.intel.com>
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
Reviewed-by: Chao Gao <chao.gao@intel.com>
Message-ID: <20250222014225.897298-5-binbin.wu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce the wiring for handling TDX VM exits by implementing the
callbacks .get_exit_info(), .get_entry_info(), and .handle_exit().
Additionally, add error handling during the TDX VM exit flow, and add a
place holder to handle various exit reasons.
Store VMX exit reason and exit qualification in struct vcpu_vt for TDX,
so that TDX/VMX can use the same helpers to get exit reason and exit
qualification. Store extended exit qualification and exit GPA info in
struct vcpu_tdx because they are used by TDX code only.
Contention Handling: The TDH.VP.ENTER operation may contend with TDH.MEM.*
operations due to secure EPT or TD EPOCH. If the contention occurs,
the return value will have TDX_OPERAND_BUSY set, prompting the vCPU to
attempt re-entry into the guest with EXIT_FASTPATH_EXIT_HANDLED,
not EXIT_FASTPATH_REENTER_GUEST, so that the interrupts pending during
IN_GUEST_MODE can be delivered for sure. Otherwise, the requester of
KVM_REQ_OUTSIDE_GUEST_MODE may be blocked endlessly.
Error Handling:
- TDX_SW_ERROR: This includes #UD caused by SEAMCALL instruction if the
CPU isn't in VMX operation, #GP caused by SEAMCALL instruction when TDX
isn't enabled by the BIOS, and TDX_SEAMCALL_VMFAILINVALID when SEAM
firmware is not loaded or disabled.
- TDX_ERROR: This indicates some check failed in the TDX module, preventing
the vCPU from running.
- Failed VM Entry: Exit to userspace with KVM_EXIT_FAIL_ENTRY. Handle it
separately before handling TDX_NON_RECOVERABLE because when off-TD debug
is not enabled, TDX_NON_RECOVERABLE is set.
- TDX_NON_RECOVERABLE: Set by the TDX module when the error is
non-recoverable, indicating that the TDX guest is dead or the vCPU is
disabled.
A special case is triple fault, which also sets TDX_NON_RECOVERABLE but
exits to userspace with KVM_EXIT_SHUTDOWN, aligning with the VMX case.
- Any unhandled VM exit reason will also return to userspace with
KVM_EXIT_INTERNAL_ERROR.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Co-developed-by: Binbin Wu <binbin.wu@linux.intel.com>
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
Reviewed-by: Chao Gao <chao.gao@intel.com>
Message-ID: <20250222014225.897298-4-binbin.wu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move pv_unhalted check out of kvm_vcpu_has_events(), check pv_unhalted
explicitly when handling PV unhalt and expose kvm_vcpu_has_events().
kvm_vcpu_has_events() returns true if pv_unhalted is set, and pv_unhalted
is only cleared on transitions to KVM_MP_STATE_RUNNABLE. If the guest
initiates a spurious wakeup, pv_unhalted could be left set in perpetuity.
Currently, this is not problematic because kvm_vcpu_has_events() is only
called when handling PV unhalt. However, if kvm_vcpu_has_events() is used
for other purposes in the future, it could return the unexpected results.
Export kvm_vcpu_has_events() for its usage in broader contexts.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
Message-ID: <20250222014225.897298-3-binbin.wu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Have ____kvm_emulate_hypercall() read the GPRs instead of passing them
in via the macro.
When emulating KVM hypercalls via TDVMCALL, TDX will marshall registers of
TDVMCALL ABI into KVM's x86 registers to match the definition of KVM
hypercall ABI _before_ ____kvm_emulate_hypercall() gets called. Therefore,
____kvm_emulate_hypercall() can just read registers internally based on KVM
hypercall ABI, and those registers can be removed from the
__kvm_emulate_hypercall() macro.
Also, op_64_bit can be determined inside ____kvm_emulate_hypercall(),
remove it from the __kvm_emulate_hypercall() macro as well.
No functional change intended.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Message-ID: <20250222014225.897298-2-binbin.wu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a flag KVM_DEBUGREG_AUTO_SWITCH to skip saving/restoring guest
DRs.
TDX-SEAM unconditionally saves/restores guest DRs on TD exit/enter,
and resets DRs to architectural INIT state on TD exit. Use the new
flag KVM_DEBUGREG_AUTO_SWITCH to indicate that KVM doesn't need to
save/restore guest DRs. KVM still needs to restore host DRs after TD
exit if there are active breakpoints in the host, which is covered by
the existing code.
MOV-DR exiting is always cleared for TDX guests, so the handler for DR
access is never called, and KVM_DEBUGREG_WONT_EXIT is never set. Add
a warning if both KVM_DEBUGREG_WONT_EXIT and KVM_DEBUGREG_AUTO_SWITCH
are set.
Opportunistically convert the KVM_DEBUGREG_* definitions to use BIT().
Reported-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Co-developed-by: Chao Gao <chao.gao@intel.com>
Signed-off-by: Chao Gao <chao.gao@intel.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
[binbin: rework changelog]
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
Message-ID: <20241210004946.3718496-2-binbin.wu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20250129095902.16391-13-adrian.hunter@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Save the IA32_DEBUGCTL MSR before entering a TDX VCPU and restore it
afterwards. The TDX Module preserves bits 1, 12, and 14, so if no
other bits are set, no restore is done.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Message-ID: <20250129095902.16391-12-adrian.hunter@intel.com>
Reviewed-by: Xiayao Li <xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Support for restoring IA32_TSX_CTRL MSR and IA32_UMWAIT_CONTROL MSR is not
yet implemented, so disable support for TSX and WAITPKG for now. Clear the
associated CPUID bits returned by KVM_TDX_CAPABILITIES, and return an error
if those bits are set in KVM_TDX_INIT_VM.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Message-ID: <20250129095902.16391-11-adrian.hunter@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Several MSRs are clobbered on TD exit that are not used by Linux while
in ring 0. Ensure the cached value of the MSR is updated on vcpu_put,
and the MSRs themselves before returning to ring 3.
Co-developed-by: Tony Lindgren <tony.lindgren@linux.intel.com>
Signed-off-by: Tony Lindgren <tony.lindgren@linux.intel.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20250129095902.16391-10-adrian.hunter@intel.com>
Reviewed-by: Xiayao Li <xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Several MSRs are constant and only used in userspace(ring 3). But VMs may
have different values. KVM uses kvm_set_user_return_msr() to switch to
guest's values and leverages user return notifier to restore them when the
kernel is to return to userspace. To eliminate unnecessary wrmsr, KVM also
caches the value it wrote to an MSR last time.
TDX module unconditionally resets some of these MSRs to architectural INIT
state on TD exit. It makes the cached values in kvm_user_return_msrs are
inconsistent with values in hardware. This inconsistency needs to be
fixed. Otherwise, it may mislead kvm_on_user_return() to skip restoring
some MSRs to the host's values. kvm_set_user_return_msr() can help correct
this case, but it is not optimal as it always does a wrmsr. So, introduce
a variation of kvm_set_user_return_msr() to update cached values and skip
that wrmsr.
Signed-off-by: Chao Gao <chao.gao@intel.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20250129095902.16391-9-adrian.hunter@intel.com>
Reviewed-by: Xiayao Li <xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On exiting from the guest TD, xsave state is clobbered; restore it.
Do not use kvm_load_host_xsave_state(), as it relies on vcpu->arch
to find out whether other KVM_RUN code has loaded guest state into
XCR0/PKRU/XSS or not. In the case of TDX, the exit values are known
independent of the guest CR0 and CR4, and in fact the latter are not
available.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Message-ID: <20250129095902.16391-8-adrian.hunter@intel.com>
[Rewrite to not use kvm_load_host_xsave_state. - Paolo]
Reviewed-by: Xiayao Li <xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On entering/exiting TDX vcpu, preserved or clobbered CPU state is different
from the VMX case. Add TDX hooks to save/restore host/guest CPU state.
Save/restore kernel GS base MSR.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20250129095902.16391-7-adrian.hunter@intel.com>
Reviewed-by: Xiayao Li <xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Implement callbacks to enter/exit a TDX VCPU by calling tdh_vp_enter().
Ensure the TDX VCPU is in a correct state to run.
Do not pass arguments from/to vcpu->arch.regs[] unconditionally. Instead,
marshall state to/from the appropriate x86 registers only when needed,
i.e., to handle some TDVMCALL sub-leaves following KVM's ABI to leverage
the existing code.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Message-ID: <20250129095902.16391-6-adrian.hunter@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move common fields of struct vcpu_vmx and struct vcpu_tdx to struct
vcpu_vt, to share the code between VMX/TDX as much as possible and to make
TDX exit handling more VMX like.
No functional change intended.
[Adrian: move code that depends on struct vcpu_vmx back to vmx.h]
Suggested-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/Z1suNzg2Or743a7e@google.com
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Message-ID: <20250129095902.16391-5-adrian.hunter@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Intel TDX protects guest VM's from malicious host and certain physical
attacks. TDX introduces a new operation mode, Secure Arbitration Mode
(SEAM) to isolate and protect guest VM's. A TDX guest VM runs in SEAM and,
unlike VMX, direct control and interaction with the guest by the host VMM
is not possible. Instead, Intel TDX Module, which also runs in SEAM,
provides a SEAMCALL API.
The SEAMCALL that provides the ability to enter a guest is TDH.VP.ENTER.
The TDX Module processes TDH.VP.ENTER, and enters the guest via VMX
VMLAUNCH/VMRESUME instructions. When a guest VM-exit requires host VMM
interaction, the TDH.VP.ENTER SEAMCALL returns to the host VMM (KVM).
Add tdh_vp_enter() to wrap the SEAMCALL invocation of TDH.VP.ENTER;
tdh_vp_enter() needs to be noinstr because VM entry in KVM is noinstr
as well, which is for two reasons:
* marking the area as CT_STATE_GUEST via guest_state_enter_irqoff() and
guest_state_exit_irqoff()
* IRET must be avoided between VM-exit and NMI handling, in order to
avoid prematurely releasing the NMI inhibit.
TDH.VP.ENTER is different from other SEAMCALLs in several ways: it
uses more arguments, and after it returns some host state may need to be
restored. Therefore tdh_vp_enter() uses __seamcall_saved_ret() instead of
__seamcall_ret(); since it is the only caller of __seamcall_saved_ret(),
it can be made noinstr also.
TDH.VP.ENTER arguments are passed through General Purpose Registers (GPRs).
For the special case of the TD guest invoking TDG.VP.VMCALL, nearly any GPR
can be used, as well as XMM0 to XMM15. Notably, RBP is not used, and Linux
mandates the TDX Module feature NO_RBP_MOD, which is enforced elsewhere.
Additionally, XMM registers are not required for the existing Guest
Hypervisor Communication Interface and are handled by existing KVM code
should they be modified by the guest.
There are 2 input formats and 5 output formats for TDH.VP.ENTER arguments.
Input #1 : Initial entry or following a previous async. TD Exit
Input #2 : Following a previous TDCALL(TDG.VP.VMCALL)
Output #1 : On Error (No TD Entry)
Output #2 : Async. Exits with a VMX Architectural Exit Reason
Output #3 : Async. Exits with a non-VMX TD Exit Status
Output #4 : Async. Exits with Cross-TD Exit Details
Output #5 : On TDCALL(TDG.VP.VMCALL)
Currently, to keep things simple, the wrapper function does not attempt
to support different formats, and just passes all the GPRs that could be
used. The GPR values are held by KVM in the area set aside for guest
GPRs. KVM code uses the guest GPR area (vcpu->arch.regs[]) to set up for
or process results of tdh_vp_enter().
Therefore changing tdh_vp_enter() to use more complex argument formats
would also alter the way KVM code interacts with tdh_vp_enter().
Signed-off-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Message-ID: <20241121201448.36170-2-adrian.hunter@intel.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the handling of SEPT zap errors caused by unsuccessful execution of
tdh_mem_page_add() in KVM_TDX_INIT_MEM_REGION from
tdx_sept_drop_private_spte() to tdx_sept_zap_private_spte(). Introduce a
new helper function tdx_is_sept_zap_err_due_to_premap() to detect this
specific error.
During the IOCTL KVM_TDX_INIT_MEM_REGION, KVM premaps leaf SPTEs in the
mirror page table before the corresponding entry in the private page table
is successfully installed by tdh_mem_page_add(). If an error occurs during
the invocation of tdh_mem_page_add(), a mismatch between the mirror and
private page tables results in SEAMCALLs for SEPT zap returning the error
code TDX_EPT_ENTRY_STATE_INCORRECT.
The error TDX_EPT_WALK_FAILED is not possible because, during
KVM_TDX_INIT_MEM_REGION, KVM only premaps leaf SPTEs after successfully
mapping non-leaf SPTEs. Unlike leaf SPTEs, there is no mismatch in non-leaf
PTEs between the mirror and private page tables. Therefore, during zap,
SEAMCALLs should find an empty leaf entry in the private EPT, leading to
the error TDX_EPT_ENTRY_STATE_INCORRECT instead of TDX_EPT_WALK_FAILED.
Since tdh_mem_range_block() is always invoked before tdh_mem_page_remove(),
move the handling of SEPT zap errors from tdx_sept_drop_private_spte() to
tdx_sept_zap_private_spte(). In tdx_sept_zap_private_spte(), return 0 for
errors due to premap to skip executing other SEAMCALLs for zap, which are
unnecessary. Return 1 to indicate no other errors, allowing the execution
of other zap SEAMCALLs to continue.
The failure of tdh_mem_page_add() is uncommon and has not been observed in
real workloads. Currently, this failure is only hypothetically triggered by
skipping the real SEAMCALL and faking the add error in the SEAMCALL
wrapper. Additionally, without this fix, there will be no host crashes or
other severe issues.
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Message-ID: <20250217085642.19696-1-yan.y.zhao@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Wrap vmx_update_cpu_dirty_logging so as to ignore requests to update
CPU dirty logging for TDs, as basic TDX does not support the PML feature.
Invoking vmx_update_cpu_dirty_logging() for TDs would cause an incorrect
access to a kvm_vmx struct for a TDX VM, so block that before it happens.
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make cpu_dirty_log_size (CPU's dirty log buffer size) a per-VM value and
set the per-VM cpu_dirty_log_size only for normal VMs when PML is enabled.
Do not set it for TDs.
Until now, cpu_dirty_log_size was a system-wide value that is used for
all VMs and is set to the PML buffer size when PML was enabled in VMX.
However, PML is not currently supported for TDs, though PML remains
available for normal VMs as long as the feature is supported by hardware
and enabled in VMX.
Making cpu_dirty_log_size a per-VM value allows it to be ther PML buffer
size for normal VMs and 0 for TDs. This allows functions like
kvm_arch_sync_dirty_log() and kvm_mmu_update_cpu_dirty_logging() to
determine if PML is supported, in order to kick off vCPUs or request them
to update CPU dirty logging status (turn on/off PML in VMCS).
This fixes an issue first reported in [1], where QEMU attaches an
emulated VGA device to a TD; note that KVM_MEM_LOG_DIRTY_PAGES
still works if the corresponding has no flag KVM_MEM_GUEST_MEMFD.
KVM then invokes kvm_mmu_update_cpu_dirty_logging() and from there
vmx_update_cpu_dirty_logging(), which incorrectly accesses a kvm_vmx
struct for a TDX VM.
Reported-by: ANAND NARSHINHA PATIL <Anand.N.Patil@ibm.com>
Reported-by: Pedro Principeza <pedro.principeza@canonical.com>
Reported-by: Farrah Chen <farrah.chen@intel.com>
Closes: https://github.com/canonical/tdx/issues/202
Link: https://github.com/canonical/tdx/issues/202 [1]
Suggested-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a parameter "kvm" to kvm_mmu_page_ad_need_write_protect() and its
caller tdp_mmu_need_write_protect().
This is a preparation to make cpu_dirty_log_size a per-VM value rather than
a system-wide value.
No function changes expected.
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a parameter "kvm" to kvm_cpu_dirty_log_size() and down to its callers:
kvm_dirty_ring_get_rsvd_entries(), kvm_dirty_ring_alloc().
This is a preparation to make cpu_dirty_log_size a per-VM value rather than
a system-wide value.
No function changes expected.
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Handle vCPUs dissociations by invoking SEAMCALL TDH.VP.FLUSH which flushes
the address translation caches and cached TD VMCS of a TD vCPU in its
associated pCPU.
In TDX, a vCPUs can only be associated with one pCPU at a time, which is
done by invoking SEAMCALL TDH.VP.ENTER. For a successful association, the
vCPU must be dissociated from its previous associated pCPU.
To facilitate vCPU dissociation, introduce a per-pCPU list
associated_tdvcpus. Add a vCPU into this list when it's loaded into a new
pCPU (i.e. when a vCPU is loaded for the first time or migrated to a new
pCPU).
vCPU dissociations can happen under below conditions:
- On the op hardware_disable is called.
This op is called when virtualization is disabled on a given pCPU, e.g.
when hot-unplug a pCPU or machine shutdown/suspend.
In this case, dissociate all vCPUs from the pCPU by iterating its
per-pCPU list associated_tdvcpus.
- On vCPU migration to a new pCPU.
Before adding a vCPU into associated_tdvcpus list of the new pCPU,
dissociation from its old pCPU is required, which is performed by issuing
an IPI and executing SEAMCALL TDH.VP.FLUSH on the old pCPU.
On a successful dissociation, the vCPU will be removed from the
associated_tdvcpus list of its previously associated pCPU.
- On tdx_mmu_release_hkid() is called.
TDX mandates that all vCPUs must be disassociated prior to the release of
an hkid. Therefore, dissociation of all vCPUs is a must before executing
the SEAMCALL TDH.MNG.VPFLUSHDONE and subsequently freeing the hkid.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Co-developed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Co-developed-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Message-ID: <20241112073858.22312-1-yan.y.zhao@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a new VM-scoped KVM_MEMORY_ENCRYPT_OP IOCTL subcommand,
KVM_TDX_FINALIZE_VM, to perform TD Measurement Finalization.
Documentation for the API is added in another patch:
"Documentation/virt/kvm: Document on Trust Domain Extensions(TDX)"
For the purpose of attestation, a measurement must be made of the TDX VM
initial state. This is referred to as TD Measurement Finalization, and
uses SEAMCALL TDH.MR.FINALIZE, after which:
1. The VMM adding TD private pages with arbitrary content is no longer
allowed
2. The TDX VM is runnable
Co-developed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Message-ID: <20240904030751.117579-21-rick.p.edgecombe@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a new ioctl for the user space VMM to initialize guest memory with the
specified memory contents.
Because TDX protects the guest's memory, the creation of the initial guest
memory requires a dedicated TDX module API, TDH.MEM.PAGE.ADD(), instead of
directly copying the memory contents into the guest's memory in the case of
the default VM type.
Define a new subcommand, KVM_TDX_INIT_MEM_REGION, of vCPU-scoped
KVM_MEMORY_ENCRYPT_OP. Check if the GFN is already pre-allocated, assign
the guest page in Secure-EPT, copy the initial memory contents into the
guest memory, and encrypt the guest memory. Optionally, extend the memory
measurement of the TDX guest.
The ioctl uses the vCPU file descriptor because of the TDX module's
requirement that the memory is added to the S-EPT (via TDH.MEM.SEPT.ADD)
prior to initialization (TDH.MEM.PAGE.ADD). Accessing the MMU in turn
requires a vCPU file descriptor, just like for KVM_PRE_FAULT_MEMORY. In
fact, the post-populate callback is able to reuse the same logic used by
KVM_PRE_FAULT_MEMORY, so that userspace can do everything with a single
ioctl.
Note that this is the only way to invoke TDH.MEM.SEPT.ADD before the TD
in finalized, as userspace cannot use KVM_PRE_FAULT_MEMORY at that
point. This ensures that there cannot be pages in the S-EPT awaiting
TDH.MEM.PAGE.ADD, which would be treated incorrectly as spurious by
tdp_mmu_map_handle_target_level() (KVM would see the SPTE as PRESENT,
but the corresponding S-EPT entry will be !PRESENT).
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Co-developed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Co-developed-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
---
- KVM_BUG_ON() for kvm_tdx->nr_premapped (Paolo)
- Use tdx_operand_busy()
- Merge first patch in SEPT SEAMCALL retry series in to this base
(Paolo)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In future changes coco specific code will need to call kvm_tdp_map_page()
from within their respective gmem_post_populate() callbacks. Export it
so this can be done from vendor specific code. Since kvm_mmu_reload()
will be needed for this operation, export its callee kvm_mmu_load() as
well.
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Message-ID: <20241112073827.22270-1-yan.y.zhao@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Bail out of the loop in kvm_tdp_map_page() when a VM is dead. Otherwise,
kvm_tdp_map_page() may get stuck in the kernel loop when there's only one
vCPU in the VM (or if the other vCPUs are not executing ioctls), even if
fatal errors have occurred.
kvm_tdp_map_page() is called by the ioctl KVM_PRE_FAULT_MEMORY or the TDX
ioctl KVM_TDX_INIT_MEM_REGION. It loops in the kernel whenever RET_PF_RETRY
is returned. In the TDP MMU, kvm_tdp_mmu_map() always returns RET_PF_RETRY,
regardless of the specific error code from tdp_mmu_set_spte_atomic(),
tdp_mmu_link_sp(), or tdp_mmu_split_huge_page(). While this is acceptable
in general cases where the only possible error code from these functions is
-EBUSY, TDX introduces an additional error code, -EIO, due to SEAMCALL
errors.
Since this -EIO error is also a fatal error, check for VM dead in the
kvm_tdp_map_page() to avoid unnecessary retries until a signal is pending.
The error -EIO is uncommon and has not been observed in real workloads.
Currently, it is only hypothetically triggered by bypassing the real
SEAMCALL and faking an error in the SEAMCALL wrapper.
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Message-ID: <20250220102728.24546-1-yan.y.zhao@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Implement hook private_max_mapping_level for TDX to let TDP MMU core get
max mapping level of private pages.
The value is hard coded to 4K for no huge page support for now.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Co-developed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Co-developed-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241112073816.22256-1-yan.y.zhao@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Implement hooks in TDX to propagate changes of mirror page table to private
EPT, including changes for page table page adding/removing, guest page
adding/removing.
TDX invokes corresponding SEAMCALLs in the hooks.
- Hook link_external_spt
propagates adding page table page into private EPT.
- Hook set_external_spte
tdx_sept_set_private_spte() in this patch only handles adding of guest
private page when TD is finalized.
Later patches will handle the case of adding guest private pages before
TD finalization.
- Hook free_external_spt
It is invoked when page table page is removed in mirror page table, which
currently must occur at TD tear down phase, after hkid is freed.
- Hook remove_external_spte
It is invoked when guest private page is removed in mirror page table,
which can occur when TD is active, e.g. during shared <-> private
conversion and slot move/deletion.
This hook is ensured to be triggered before hkid is freed, because
gmem fd is released along with all private leaf mappings zapped before
freeing hkid at VM destroy.
TDX invokes below SEAMCALLs sequentially:
1) TDH.MEM.RANGE.BLOCK (remove RWX bits from a private EPT entry),
2) TDH.MEM.TRACK (increases TD epoch)
3) TDH.MEM.PAGE.REMOVE (remove the private EPT entry and untrack the
guest page).
TDH.MEM.PAGE.REMOVE can't succeed without TDH.MEM.RANGE.BLOCK and
TDH.MEM.TRACK being called successfully.
SEAMCALL TDH.MEM.TRACK is called in function tdx_track() to enforce that
TLB tracking will be performed by TDX module for private EPT.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Co-developed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Co-developed-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
---
- Remove TDX_ERROR_SEPT_BUSY and Add tdx_operand_busy() helper (Binbin)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Handle TLB tracking for TDX by introducing function tdx_track() for private
memory TLB tracking and implementing flush_tlb* hooks to flush TLBs for
shared memory.
Introduce function tdx_track() to do TLB tracking on private memory, which
basically does two things: calling TDH.MEM.TRACK to increase TD epoch and
kicking off all vCPUs. The private EPT will then be flushed when each vCPU
re-enters the TD. This function is unused temporarily in this patch and
will be called on a page-by-page basis on removal of private guest page in
a later patch.
In earlier revisions, tdx_track() relied on an atomic counter to coordinate
the synchronization between the actions of kicking off vCPUs, incrementing
the TD epoch, and the vCPUs waiting for the incremented TD epoch after
being kicked off.
However, the core MMU only actually needs to call tdx_track() while
aleady under a write mmu_lock. So this sychnonization can be made to be
unneeded. vCPUs are kicked off only after the successful execution of
TDH.MEM.TRACK, eliminating the need for vCPUs to wait for TDH.MEM.TRACK
completion after being kicked off. tdx_track() is therefore able to send
requests KVM_REQ_OUTSIDE_GUEST_MODE rather than KVM_REQ_TLB_FLUSH.
Hooks for flush_remote_tlb and flush_remote_tlbs_range are not necessary
for TDX, as tdx_track() will handle TLB tracking of private memory on
page-by-page basis when private guest pages are removed. There is no need
to invoke tdx_track() again in kvm_flush_remote_tlbs() even after changes
to the mirrored page table.
For hooks flush_tlb_current and flush_tlb_all, which are invoked during
kvm_mmu_load() and vcpu load for normal VMs, let VMM to flush all EPTs in
the two hooks for simplicity, since TDX does not depend on the two
hooks to notify TDX module to flush private EPT in those cases.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Co-developed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Co-developed-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Message-ID: <20241112073753.22228-1-yan.y.zhao@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Set per-VM shadow_mmio_value to 0 for TDX.
With enable_mmio_caching on, KVM installs MMIO SPTEs for TDs. To correctly
configure MMIO SPTEs, TDX requires the per-VM shadow_mmio_value to be set
to 0. This is necessary to override the default value of the suppress VE
bit in the SPTE, which is 1, and to ensure value 0 in RWX bits.
For MMIO SPTE, the spte value changes as follows:
1. initial value (suppress VE bit is set)
2. Guest issues MMIO and triggers EPT violation
3. KVM updates SPTE value to MMIO value (suppress VE bit is cleared)
4. Guest MMIO resumes. It triggers VE exception in guest TD
5. Guest VE handler issues TDG.VP.VMCALL<MMIO>
6. KVM handles MMIO
7. Guest VE handler resumes its execution after MMIO instruction
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Co-developed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Co-developed-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241112073743.22214-1-yan.y.zhao@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Future changes will want to set shadow_mmio_value from TDX code. Add a
helper to setter with a name that makes more sense from that context.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
[split into new patch]
Co-developed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241112073730.22200-1-yan.y.zhao@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Disable TDX support when TDP MMU or mmio caching or EPT A/D bits aren't
supported.
As TDP MMU is becoming main stream than the legacy MMU, the legacy MMU
support for TDX isn't implemented.
TDX requires KVM mmio caching. Without mmio caching, KVM will go to MMIO
emulation without installing SPTEs for MMIOs. However, TDX guest is
protected and KVM would meet errors when trying to emulate MMIOs for TDX
guest during instruction decoding. So, TDX guest relies on SPTEs being
installed for MMIOs, which are with no RWX bits and with VE suppress bit
unset, to inject VE to TDX guest. The TDX guest would then issue TDVMCALL
in the VE handler to perform instruction decoding and have host do MMIO
emulation.
TDX also relies on EPT A/D bits as EPT A/D bits have been supported in all
CPUs since Haswell. Relying on it can avoid RWX bits being masked out in
the mirror page table for prefaulted entries.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Co-developed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Co-developed-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
---
Requested by Sean at [1].
[1] https://lore.kernel.org/kvm/Zva4aORxE9ljlMNe@google.com/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make the direct root handle memslot GFNs at an alias with the TDX shared
bit set.
For TDX shared memory, the memslot GFNs need to be mapped at an alias with
the shared bit set. These shared mappings will be mapped on the KVM MMU's
"direct" root. The direct root has it's mappings shifted by applying
"gfn_direct_bits" as a mask. The concept of "GPAW" (guest physical address
width) determines the location of the shared bit. So set gfn_direct_bits
based on this, to map shared memory at the proper GPA.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Co-developed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Co-developed-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241112073613.22100-1-yan.y.zhao@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
TDX uses two EPT pointers, one for the private half of the GPA space and
one for the shared half. The private half uses the normal EPT_POINTER vmcs
field, which is managed in a special way by the TDX module. For TDX, KVM is
not allowed to operate on it directly. The shared half uses a new
SHARED_EPT_POINTER field and will be managed by the conventional MMU
management operations that operate directly on the EPT root. This means for
TDX the .load_mmu_pgd() operation will need to know to use the
SHARED_EPT_POINTER field instead of the normal one. Add a new wrapper in
x86 ops for load_mmu_pgd() that either directs the write to the existing
vmx implementation or a TDX one.
tdx_load_mmu_pgd() is so much simpler than vmx_load_mmu_pgd() since for the
TDX mode of operation, EPT will always be used and KVM does not need to be
involved in virtualization of CR3 behavior. So tdx_load_mmu_pgd() can
simply write to SHARED_EPT_POINTER.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Co-developed-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Co-developed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Co-developed-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241112073601.22084-1-yan.y.zhao@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
TDX defines SEAMCALL APIs to access TDX control structures corresponding to
the VMX VMCS. Introduce helper accessors to hide its SEAMCALL ABI details.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Co-developed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Co-developed-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Message-ID: <20241112073551.22070-1-yan.y.zhao@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Teach EPT violation helper to check shared mask of a GPA to find out
whether the GPA is for private memory.
When EPT violation is triggered after TD accessing a private GPA, KVM will
exit to user space if the corresponding GFN's attribute is not private.
User space will then update GFN's attribute during its memory conversion
process. After that, TD will re-access the private GPA and trigger EPT
violation again. Only with GFN's attribute matches to private, KVM will
fault in private page, map it in mirrored TDP root, and propagate changes
to private EPT to resolve the EPT violation.
Relying on GFN's attribute tracking xarray to determine if a GFN is
private, as for KVM_X86_SW_PROTECTED_VM, may lead to endless EPT
violations.
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Co-developed-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Message-ID: <20241112073539.22056-1-yan.y.zhao@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The difference of TDX EPT violation is how to retrieve information, GPA,
and exit qualification. To share the code to handle EPT violation, split
out the guts of EPT violation handler so that VMX/TDX exit handler can call
it after retrieving GPA and exit qualification.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Co-developed-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Co-developed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Message-ID: <20241112073528.22042-1-yan.y.zhao@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fail kvm_page_track_write_tracking_enabled() if VM type is TDX to make the
external page track user fail in kvm_page_track_register_notifier() since
TDX does not support write protection and hence page track.
No need to fail KVM internal users of page track (i.e. for shadow page),
because TDX is always with EPT enabled and currently TDX module does not
emulate and send VMLAUNCH/VMRESUME VMExits to VMM.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Cc: Yuan Yao <yuan.yao@linux.intel.com>
Message-ID: <20241112073515.22028-1-yan.y.zhao@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Export a function to walk down the TDP without modifying it and simply
check if a GPA is mapped.
Future changes will support pre-populating TDX private memory. In order to
implement this KVM will need to check if a given GFN is already
pre-populated in the mirrored EPT. [1]
There is already a TDP MMU walker, kvm_tdp_mmu_get_walk() for use within
the KVM MMU that almost does what is required. However, to make sense of
the results, MMU internal PTE helpers are needed. Refactor the code to
provide a helper that can be used outside of the KVM MMU code.
Refactoring the KVM page fault handler to support this lookup usage was
also considered, but it was an awkward fit.
kvm_tdp_mmu_gpa_is_mapped() is based on a diff by Paolo Bonzini.
Link: https://lore.kernel.org/kvm/ZfBkle1eZFfjPI8l@google.com/ [1]
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Co-developed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241112073457.22011-1-yan.y.zhao@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Update attr_filter field to zap both private and shared mappings for TDX
when memslot is deleted.
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Co-developed-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Message-ID: <20241112073426.21997-1-yan.y.zhao@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The TDX module measures the TD during the build process and saves the
measurement in TDCS.MRTD to facilitate TD attestation of the initial
contents of the TD. Wrap the SEAMCALL TDH.MR.EXTEND with tdh_mr_extend()
and TDH.MR.FINALIZE with tdh_mr_finalize() to enable the host kernel to
assist the TDX module in performing the measurement.
The measurement in TDCS.MRTD is a SHA-384 digest of the build process.
SEAMCALLs TDH.MNG.INIT and TDH.MEM.PAGE.ADD initialize and contribute to
the MRTD digest calculation.
The caller of tdh_mr_extend() should break the TD private page into chunks
of size TDX_EXTENDMR_CHUNKSIZE and invoke tdh_mr_extend() to add the page
content into the digest calculation. Failures are possible with
TDH.MR.EXTEND (e.g., due to SEPT walking). The caller of tdh_mr_extend()
can check the function return value and retrieve extended error information
from the function output parameters.
Calling tdh_mr_finalize() completes the measurement. The TDX module then
turns the TD into the runnable state. Further TDH.MEM.PAGE.ADD and
TDH.MR.EXTEND calls will fail.
TDH.MR.FINALIZE may fail due to errors such as the TD having no vCPUs or
contentions. Check function return value when calling tdh_mr_finalize() to
determine the exact reason for failure. Take proper locks on the caller's
side to avoid contention failures, or handle the BUSY error in specific
ways (e.g., retry). Return the SEAMCALL error code directly to the caller.
Do not attempt to handle it in the core kernel.
[Kai: Switched from generic seamcall export]
[Yan: Re-wrote the changelog]
Co-developed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Message-ID: <20241112073709.22171-1-yan.y.zhao@intel.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
TDX architecture introduces the concept of private GPA vs shared GPA,
depending on the GPA.SHARED bit. The TDX module maintains a single Secure
EPT (S-EPT or SEPT) tree per TD to translate TD's private memory accessed
using a private GPA. Wrap the SEAMCALL TDH.MEM.PAGE.REMOVE with
tdh_mem_page_remove() and TDH_PHYMEM_PAGE_WBINVD with
tdh_phymem_page_wbinvd_hkid() to unmap a TD private page from the SEPT,
remove the TD private page from the TDX module and flush cache lines to
memory after removal of the private page.
Callers should specify "GPA" and "level" when calling tdh_mem_page_remove()
to indicate to the TDX module which TD private page to unmap and remove.
TDH.MEM.PAGE.REMOVE may fail, and the caller of tdh_mem_page_remove() can
check the function return value and retrieve extended error information
from the function output parameters. Follow the TLB tracking protocol
before calling tdh_mem_page_remove() to remove a TD private page to avoid
SEAMCALL failure.
After removing a TD's private page, the TDX module does not write back and
invalidate cache lines associated with the page and the page's keyID (i.e.,
the TD's guest keyID). Therefore, provide tdh_phymem_page_wbinvd_hkid() to
allow the caller to pass in the TD's guest keyID and invoke
TDH_PHYMEM_PAGE_WBINVD to perform this action.
Before reusing the page, the host kernel needs to map the page with keyID 0
and invoke movdir64b() to convert the TD private page to a normal shared
page.
TDH.MEM.PAGE.REMOVE and TDH_PHYMEM_PAGE_WBINVD may meet contentions inside
the TDX module for TDX's internal resources. To avoid staying in SEAM mode
for too long, TDX module will return a BUSY error code to the kernel
instead of spinning on the locks. The caller may need to handle this error
in specific ways (e.g., retry). The wrappers return the SEAMCALL error code
directly to the caller. Don't attempt to handle it in the core kernel.
[Kai: Switched from generic seamcall export]
[Yan: Re-wrote the changelog]
Co-developed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Message-ID: <20241112073658.22157-1-yan.y.zhao@intel.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
TDX module defines a TLB tracking protocol to make sure that no logical
processor holds any stale Secure EPT (S-EPT or SEPT) TLB translations for a
given TD private GPA range. After a successful TDH.MEM.RANGE.BLOCK,
TDH.MEM.TRACK, and kicking off all vCPUs, TDX module ensures that the
subsequent TDH.VP.ENTER on each vCPU will flush all stale TLB entries for
the specified GPA ranges in TDH.MEM.RANGE.BLOCK. Wrap the
TDH.MEM.RANGE.BLOCK with tdh_mem_range_block() and TDH.MEM.TRACK with
tdh_mem_track() to enable the kernel to assist the TDX module in TLB
tracking management.
The caller of tdh_mem_range_block() needs to specify "GPA" and "level" to
request the TDX module to block the subsequent creation of TLB translation
for a GPA range. This GPA range can correspond to a SEPT page or a TD
private page at any level.
Contentions and errors are possible with the SEAMCALL TDH.MEM.RANGE.BLOCK.
Therefore, the caller of tdh_mem_range_block() needs to check the function
return value and retrieve extended error info from the function output
params.
Upon TDH.MEM.RANGE.BLOCK success, no new TLB entries will be created for
the specified private GPA range, though the existing TLB translations may
still persist. TDH.MEM.TRACK will then advance the TD's epoch counter to
ensure TDX module will flush TLBs in all vCPUs once the vCPUs re-enter
the TD. TDH.MEM.TRACK will fail to advance TD's epoch counter if there
are vCPUs still running in non-root mode at the previous TD epoch counter.
So to ensure private GPA translations are flushed, callers must first call
tdh_mem_range_block(), then tdh_mem_track(), and lastly send IPIs to kick
all the vCPUs and force them to re-enter, thus triggering the TLB flush.
Don't export a single operation and instead export functions that just
expose the block and track operations; this is for a couple reasons:
1. The vCPU kick should use KVM's functionality for doing this, which can better
target sending IPIs to only the minimum required pCPUs.
2. tdh_mem_track() doesn't need to be executed if a vCPU has not entered a TD,
which is information only KVM knows.
3. Leaving the operations separate will allow for batching many
tdh_mem_range_block() calls before a tdh_mem_track(). While this batching will
not be done initially by KVM, it demonstrates that keeping mem block and track
as separate operations is a generally good design.
Contentions are also possible in TDH.MEM.TRACK. For example, TDH.MEM.TRACK
may contend with TDH.VP.ENTER when advancing the TD epoch counter.
tdh_mem_track() does not provide the retries for the caller. Callers can
choose to avoid contentions or retry on their own.
[Kai: Switched from generic seamcall export]
[Yan: Re-wrote the changelog]
Co-developed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Message-ID: <20241112073648.22143-1-yan.y.zhao@intel.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
TDX architecture introduces the concept of private GPA vs shared GPA,
depending on the GPA.SHARED bit. The TDX module maintains a Secure EPT
(S-EPT or SEPT) tree per TD to translate TD's private memory accessed
using a private GPA. Wrap the SEAMCALL TDH.MEM.PAGE.ADD with
tdh_mem_page_add() and TDH.MEM.PAGE.AUG with tdh_mem_page_aug() to add TD
private pages and map them to the TD's private GPAs in the SEPT.
Callers of tdh_mem_page_add() and tdh_mem_page_aug() allocate and provide
normal pages to the wrappers, who further pass those pages to the TDX
module. Before passing the pages to the TDX module, tdh_mem_page_add() and
tdh_mem_page_aug() perform a CLFLUSH on the page mapped with keyID 0 to
ensure that any dirty cache lines don't write back later and clobber TD
memory or control structures. Don't worry about the other MK-TME keyIDs
because the kernel doesn't use them. The TDX docs specify that this flush
is not needed unless the TDX module exposes the CLFLUSH_BEFORE_ALLOC
feature bit. Do the CLFLUSH unconditionally for two reasons: make the
solution simpler by having a single path that can handle both
!CLFLUSH_BEFORE_ALLOC and CLFLUSH_BEFORE_ALLOC cases. Avoid wading into any
correctness uncertainty by going with a conservative solution to start.
Call tdh_mem_page_add() to add a private page to a TD during the TD's build
time (i.e., before TDH.MR.FINALIZE). Specify which GPA the 4K private page
will map to. No need to specify level info since TDH.MEM.PAGE.ADD only adds
pages at 4K level. To provide initial contents to TD, provide an additional
source page residing in memory managed by the host kernel itself (encrypted
with a shared keyID). The TDX module will copy the initial contents from
the source page in shared memory into the private page after mapping the
page in the SEPT to the specified private GPA. The TDX module allows the
source page to be the same page as the private page to be added. In that
case, the TDX module converts and encrypts the source page as a TD private
page.
Call tdh_mem_page_aug() to add a private page to a TD during the TD's
runtime (i.e., after TDH.MR.FINALIZE). TDH.MEM.PAGE.AUG supports adding
huge pages. Specify which GPA the private page will map to, along with
level info embedded in the lower bits of the GPA. The TDX module will
recognize the added page as the TD's private page after the TD's acceptance
with TDCALL TDG.MEM.PAGE.ACCEPT.
tdh_mem_page_add() and tdh_mem_page_aug() may fail. Callers can check
function return value and retrieve extended error info from the function
output parameters.
The TDX module has many internal locks. To avoid staying in SEAM mode for
too long, SEAMCALLs returns a BUSY error code to the kernel instead of
spinning on the locks. Depending on the specific SEAMCALL, the caller
may need to handle this error in specific ways (e.g., retry). Therefore,
return the SEAMCALL error code directly to the caller. Don't attempt to
handle it in the core kernel.
[Kai: Switched from generic seamcall export]
[Yan: Re-wrote the changelog]
Co-developed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Message-ID: <20241112073636.22129-1-yan.y.zhao@intel.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
TDX architecture introduces the concept of private GPA vs shared GPA,
depending on the GPA.SHARED bit. The TDX module maintains a Secure EPT
(S-EPT or SEPT) tree per TD for private GPA to HPA translation. Wrap the
TDH.MEM.SEPT.ADD SEAMCALL with tdh_mem_sept_add() to provide pages to the
TDX module for building a TD's SEPT tree. (Refer to these pages as SEPT
pages).
Callers need to allocate and provide a normal page to tdh_mem_sept_add(),
which then passes the page to the TDX module via the SEAMCALL
TDH.MEM.SEPT.ADD. The TDX module then installs the page into SEPT tree and
encrypts this SEPT page with the TD's guest keyID. The kernel cannot use
the SEPT page until after reclaiming it via TDH.MEM.SEPT.REMOVE or
TDH.PHYMEM.PAGE.RECLAIM.
Before passing the page to the TDX module, tdh_mem_sept_add() performs a
CLFLUSH on the page mapped with keyID 0 to ensure that any dirty cache
lines don't write back later and clobber TD memory or control structures.
Don't worry about the other MK-TME keyIDs because the kernel doesn't use
them. The TDX docs specify that this flush is not needed unless the TDX
module exposes the CLFLUSH_BEFORE_ALLOC feature bit. Do the CLFLUSH
unconditionally for two reasons: make the solution simpler by having a
single path that can handle both !CLFLUSH_BEFORE_ALLOC and
CLFLUSH_BEFORE_ALLOC cases. Avoid wading into any correctness uncertainty
by going with a conservative solution to start.
Callers should specify "GPA" and "level" for the TDX module to install the
SEPT page at the specified position in the SEPT. Do not include the root
page level in "level" since TDH.MEM.SEPT.ADD can only add non-root pages to
the SEPT. Ensure "level" is between 1 and 3 for a 4-level SEPT or between 1
and 4 for a 5-level SEPT.
Call tdh_mem_sept_add() during the TD's build time or during the TD's
runtime. Check for errors from the function return value and retrieve
extended error info from the function output parameters.
The TDX module has many internal locks. To avoid staying in SEAM mode for
too long, SEAMCALLs returns a BUSY error code to the kernel instead of
spinning on the locks. Depending on the specific SEAMCALL, the caller
may need to handle this error in specific ways (e.g., retry). Therefore,
return the SEAMCALL error code directly to the caller. Don't attempt to
handle it in the core kernel.
TDH.MEM.SEPT.ADD effectively manages two internal resources of the TDX
module: it installs page table pages in the SEPT tree and also updates the
TDX module's page metadata (PAMT). Don't add a wrapper for the matching
SEAMCALL for removing a SEPT page (TDH.MEM.SEPT.REMOVE) because KVM, as the
only in-kernel user, will only tear down the SEPT tree when the TD is being
torn down. When this happens it can just do other operations that reclaim
the SEPT pages for the host kernels to use, update the PAMT and let the
SEPT get trashed.
[Kai: Switched from generic seamcall export]
[Yan: Re-wrote the changelog]
Co-developed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Message-ID: <20241112073624.22114-1-yan.y.zhao@intel.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
TDX host key IDs (HKID) are limit resources in a machine, and the misc
cgroup lets the machine owner track their usage and limits the possibility
of abusing them outside the owner's control.
The cgroup v2 miscellaneous subsystem was introduced to control the
resource of AMD SEV & SEV-ES ASIDs. Likewise introduce HKIDs as a misc
resource.
Signed-off-by: Zhiming Hu <zhiming.hu@intel.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For TDX, the maxpa (CPUID.0x80000008.EAX[7:0]) is fixed as native and
the max_gpa (CPUID.0x80000008.EAX[23:16]) is configurable and used
to configure the EPT level and GPAW.
Use max_gpa to determine the TDP level.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Implement an IOCTL to allow userspace to read the CPUID bit values for a
configured TD.
The TDX module doesn't provide the ability to set all CPUID bits. Instead
some are configured indirectly, or have fixed values. But it does allow
for the final resulting CPUID bits to be read. This information will be
useful for userspace to understand the configuration of the TD, and set
KVM's copy via KVM_SET_CPUID2.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Co-developed-by: Tony Lindgren <tony.lindgren@linux.intel.com>
Signed-off-by: Tony Lindgren <tony.lindgren@linux.intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
---
- Fix subleaf mask check (Binbin)
- Search all possible sub-leafs (Francesco Lavra)
- Reduce off-by-one error sensitve code (Francesco, Xiaoyao)
- Handle buffers too small from userspace (Xiaoyao)
- Read max CPUID from TD instead of using fixed values (Xiaoyao)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
TD guest vcpu needs TDX specific initialization before running. Repurpose
KVM_MEMORY_ENCRYPT_OP to vcpu-scope, add a new sub-command
KVM_TDX_INIT_VCPU, and implement the callback for it.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Co-developed-by: Tony Lindgren <tony.lindgren@linux.intel.com>
Signed-off-by: Tony Lindgren <tony.lindgren@linux.intel.com>
Co-developed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
---
- Fix comment: https://lore.kernel.org/kvm/Z36OYfRW9oPjW8be@google.com/
(Sean)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Implement vcpu related stubs for TDX for create, reset and free.
For now, create only the features that do not require the TDX SEAMCALL.
The TDX specific vcpu initialization will be handled by KVM_TDX_INIT_VCPU.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
---
- Use lapic_in_kernel() (Nikolay Borisov)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Destroying TDX guest requires there's at least one cpu online for each
package, because reclaiming the TDX KeyID of the guest (as part of the
teardown process) requires to call some SEAMCALL (on any cpu) on all
packages.
Do not offline the last cpu of one package when there's any TDX guest
running, otherwise KVM may not be able to teardown TDX guest resulting
in leaking of TDX KeyID and other resources like TDX guest control
structure pages.
Implement the TDX version 'offline_cpu()' to prevent the cpu from going
offline if it is the last cpu on the package.
Co-developed-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Kai Huang <kai.huang@intel.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
TDX KVM doesn't support PMU yet, it's future work of TDX KVM support as
another patch series. For now, handle TDX by updating vcpu_to_lbr_desc()
and vcpu_to_lbr_records() to return NULL.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Co-developed-by: Tony Lindgren <tony.lindgren@linux.intel.com>
Signed-off-by: Tony Lindgren <tony.lindgren@linux.intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
---
- Add pragma poison for to_vmx() (Paolo)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After the crypto-protection key has been configured, TDX requires a
VM-scope initialization as a step of creating the TDX guest. This
"per-VM" TDX initialization does the global configurations/features that
the TDX guest can support, such as guest's CPUIDs (emulated by the TDX
module), the maximum number of vcpus etc.
Because there is no room in KVM_CREATE_VM to pass all the required
parameters, introduce a new ioctl KVM_TDX_INIT_VM and mark the VM as
TD_STATE_UNINITIALIZED until it is invoked.
This "per-VM" TDX initialization must be done before any "vcpu-scope" TDX
initialization; KVM_TDX_INIT_VM IOCTL must be invoked before the creation
of vCPUs.
Co-developed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CPUID values are provided for TDX virtual machines as part of the
KVM_TDX_INIT_VM ioctl. Unlike KVM_SET_CPUID2, TDX will need to
examine the leaves, either to validate against the CPUIDs listed
in the TDX modules configuration or to fill other controls with
matching values.
Since there is an existing function to look up a leaf/index pair
into a given list of CPUID entries, export it as kvm_find_cpuid_entry2().
Reviewed-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Change to report the KVM_CAP_MAX_VCPUS extension from globally to per-VM
to allow userspace to be able to query maximum vCPUs for TDX guest via
checking the KVM_CAP_MAX_VCPU extension on per-VM basis.
Today KVM x86 reports KVM_MAX_VCPUS as guest's maximum vCPUs for all
guests globally, and userspace, i.e. Qemu, queries the KVM_MAX_VCPUS
extension globally but not on per-VM basis.
TDX has its own limit of maximum vCPUs it can support for all TDX guests
in addition to KVM_MAX_VCPUS. TDX module reports this limit via the
MAX_VCPU_PER_TD global metadata. Different modules may report different
values. In practice, the reported value reflects the maximum logical
CPUs that ALL the platforms that the module supports can possibly have.
Note some old modules may also not support this metadata, in which case
the limit is U16_MAX.
The current way to always report KVM_MAX_VCPUS in the KVM_CAP_MAX_VCPUS
extension is not enough for TDX. To accommodate TDX, change to report
the KVM_CAP_MAX_VCPUS extension on per-VM basis.
Specifically, override kvm->max_vcpus in tdx_vm_init() for TDX guest,
and report kvm->max_vcpus in the KVM_CAP_MAX_VCPUS extension check.
Change to report "the number of logical CPUs the platform has" as the
maximum vCPUs for TDX guest. Simply forwarding the MAX_VCPU_PER_TD
reported by the TDX module would result in an unpredictable ABI because
the reported value to userspace would be depending on whims of TDX
modules.
This works in practice because of the MAX_VCPU_PER_TD reported by the
TDX module will never be smaller than the one reported to userspace.
But to make sure KVM never reports an unsupported value, sanity check
the MAX_VCPU_PER_TD reported by TDX module is not smaller than the
number of logical CPUs the platform has, otherwise refuse to use TDX.
Note, when creating a TDX guest, TDX actually requires the "maximum
vCPUs for _this_ TDX guest" as an input to initialize the TDX guest.
But TDX guest's maximum vCPUs is not part of TDREPORT thus not part of
attestation, thus there's no need to allow userspace to explicitly
_configure_ the maximum vCPUs on per-VM basis. KVM will simply use
kvm->max_vcpus as input when initializing the TDX guest.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Implement managing the TDX private KeyID to implement, create, destroy
and free for a TDX guest.
When creating at TDX guest, assign a TDX private KeyID for the TDX guest
for memory encryption, and allocate pages for the guest. These are used
for the Trust Domain Root (TDR) and Trust Domain Control Structure (TDCS).
On destruction, free the allocated pages, and the KeyID.
Before tearing down the private page tables, TDX requires the guest TD to
be destroyed by reclaiming the KeyID. Do it in the vm_pre_destroy() kvm_x86_ops
hook. The TDR control structures can be freed in the vm_destroy() hook,
which runs last.
Co-developed-by: Tony Lindgren <tony.lindgren@linux.intel.com>
Signed-off-by: Tony Lindgren <tony.lindgren@linux.intel.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Co-developed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Co-developed-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Kai Huang <kai.huang@intel.com>
Co-developed-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Co-developed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
---
- Fix build issue in kvm-coco-queue
- Init ret earlier to fix __tdx_td_init() error handling. (Chao)
- Standardize -EAGAIN for __tdx_td_init() retry errors (Rick)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
TDX KVM needs system-wide information about the TDX module. Generate the
data based on tdx_sysinfo td_conf CPUID data.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Co-developed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Co-developed-by: Tony Lindgren <tony.lindgren@linux.intel.com>
Signed-off-by: Tony Lindgren <tony.lindgren@linux.intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
---
- Clarify comment about EAX[23:16] in td_init_cpuid_entry2() (Xiaoyao)
- Add comment for configurable CPUID bits (Xiaoyao)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM_MEMORY_ENCRYPT_OP was introduced for VM-scoped operations specific for
guest state-protected VM. It defined subcommands for technology-specific
operations under KVM_MEMORY_ENCRYPT_OP. Despite its name, the subcommands
are not limited to memory encryption, but various technology-specific
operations are defined. It's natural to repurpose KVM_MEMORY_ENCRYPT_OP
for TDX specific operations and define subcommands.
Add a place holder function for TDX specific VM-scoped ioctl as mem_enc_op.
TDX specific sub-commands will be added to retrieve/pass TDX specific
parameters. Make mem_enc_ioctl non-optional as it's always filled.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Co-developed-by: Tony Lindgren <tony.lindgren@linux.intel.com>
Signed-off-by: Tony Lindgren <tony.lindgren@linux.intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
---
- Drop the misleading "defined for consistency" line. It's a copy-paste
error introduced in the earlier patches. Earlier there was padding at
the end to match struct kvm_sev_cmd size. (Tony)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add helper functions to print out errors from the TDX module in a uniform
manner.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Co-developed-by: Tony Lindgren <tony.lindgren@linux.intel.com>
Signed-off-by: Tony Lindgren <tony.lindgren@linux.intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Reviewed-by: Yuan Yao <yuan.yao@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add error codes for the TDX SEAMCALLs both for TDX VMM side for TDH
SEAMCALL and TDX guest side for TDG.VP.VMCALL. KVM issues the TDX
SEAMCALLs and checks its error code. KVM handles hypercall from the TDX
guest and may return an error. So error code for the TDX guest is also
needed.
TDX SEAMCALL uses bits 31:0 to return more information, so these error
codes will only exactly match RAX[63:32]. Error codes for TDG.VP.VMCALL is
defined by TDX Guest-Host-Communication interface spec.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Yuan Yao <yuan.yao@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-ID: <20241030190039.77971-14-rick.p.edgecombe@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Define architectural definitions for KVM to issue the TDX SEAMCALLs.
Structures and values that are architecturally defined in the TDX module
specifications the chapter of ABI Reference.
Co-developed-by: Tony Lindgren <tony.lindgren@linux.intel.com>
Signed-off-by: Tony Lindgren <tony.lindgren@linux.intel.com>
Co-developed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
---
- Drop old duplicate defines, the x86 core exports what's needed (Kai)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add TDX's own VM and vCPU structures as placeholder to manage and run
TDX guests. Also add helper functions to check whether a VM/vCPU is
TDX or normal VMX one, and add helpers to convert between TDX VM/vCPU
and KVM VM/vCPU.
TDX protects guest VMs from malicious host. Unlike VMX guests, TDX
guests are crypto-protected. KVM cannot access TDX guests' memory and
vCPU states directly. Instead, TDX requires KVM to use a set of TDX
architecture-defined firmware APIs (a.k.a TDX module SEAMCALLs) to
manage and run TDX guests.
In fact, the way to manage and run TDX guests and normal VMX guests are
quite different. Because of that, the current structures
('struct kvm_vmx' and 'struct vcpu_vmx') to manage VMX guests are not
quite suitable for TDX guests. E.g., the majority of the members of
'struct vcpu_vmx' don't apply to TDX guests.
Introduce TDX's own VM and vCPU structures ('struct kvm_tdx' and 'struct
vcpu_tdx' respectively) for KVM to manage and run TDX guests. And
instead of building TDX's VM and vCPU structures based on VMX's, build
them directly based on 'struct kvm'.
As a result, TDX and VMX guests will have different VM size and vCPU
size/alignment.
Currently, kvm_arch_alloc_vm() uses 'kvm_x86_ops::vm_size' to allocate
enough space for the VM structure when creating guest. With TDX guests,
ideally, KVM should allocate the VM structure based on the VM type so
that the precise size can be allocated for VMX and TDX guests. But this
requires more extensive code change. For now, simply choose the maximum
size of 'struct kvm_tdx' and 'struct kvm_vmx' for VM structure
allocation for both VMX and TDX guests. This would result in small
memory waste for each VM which has smaller VM structure size but this is
acceptable.
For simplicity, use the same way for vCPU allocation too. Otherwise KVM
would need to maintain a separate 'kvm_vcpu_cache' for each VM type.
Note, updating the 'vt_x86_ops::vm_size' needs to be done before calling
kvm_ops_update(), which copies vt_x86_ops to kvm_x86_ops. However this
happens before TDX module initialization. Therefore theoretically it is
possible that 'kvm_x86_ops::vm_size' is set to size of 'struct kvm_tdx'
(when it's larger) but TDX actually fails to initialize at a later time.
Again the worst case of this is wasting couple of bytes memory for each
VM. KVM could choose to update 'kvm_x86_ops::vm_size' at a later time
depending on TDX's status but that would require base KVM module to
export either kvm_x86_ops or kvm_ops_update().
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
- Make to_kvm_tdx() and to_tdx() private to tdx.c (Francesco, Tony)
- Add pragma poison for to_vmx() (Paolo)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM will need to consult some essential TDX global information to create
and run TDX guests. Get the global information after initializing TDX.
Signed-off-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Message-ID: <20241030190039.77971-3-rick.p.edgecombe@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Before KVM can use TDX to create and run TDX guests, TDX needs to be
initialized from two perspectives: 1) TDX module must be initialized
properly to a working state; 2) A per-cpu TDX initialization, a.k.a the
TDH.SYS.LP.INIT SEAMCALL must be done on any logical cpu before it can
run any other TDX SEAMCALLs.
The TDX host core-kernel provides two functions to do the above two
respectively: tdx_enable() and tdx_cpu_enable().
There are two options in terms of when to initialize TDX: initialize TDX
at KVM module loading time, or when creating the first TDX guest.
Choose to initialize TDX during KVM module loading time:
Initializing TDX module is both memory and CPU time consuming: 1) the
kernel needs to allocate a non-trivial size(~1/256) of system memory
as metadata used by TDX module to track each TDX-usable memory page's
status; 2) the TDX module needs to initialize this metadata, one entry
for each TDX-usable memory page.
Also, the kernel uses alloc_contig_pages() to allocate those metadata
chunks, because they are large and need to be physically contiguous.
alloc_contig_pages() can fail. If initializing TDX when creating the
first TDX guest, then there's chance that KVM won't be able to run any
TDX guests albeit KVM _declares_ to be able to support TDX.
This isn't good for the user.
On the other hand, initializing TDX at KVM module loading time can make
sure KVM is providing a consistent view of whether KVM can support TDX
to the user.
Always only try to initialize TDX after VMX has been initialized. TDX
is based on VMX, and if VMX fails to initialize then TDX is likely to be
broken anyway. Also, in practice, supporting TDX will require part of
VMX and common x86 infrastructure in working order, so TDX cannot be
enabled alone w/o VMX support.
There are two cases that can result in failure to initialize TDX: 1) TDX
cannot be supported (e.g., because of TDX is not supported or enabled by
hardware, or module is not loaded, or missing some dependency in KVM's
configuration); 2) Any unexpected error during TDX bring-up. For the
first case only mark TDX is disabled but still allow KVM module to be
loaded. For the second case just fail to load the KVM module so that
the user can be aware.
Because TDX costs additional memory, don't enable TDX by default. Add a
new module parameter 'enable_tdx' to allow the user to opt-in.
Note, the name tdx_init() has already been taken by the early boot code.
Use tdx_bringup() for initializing TDX (and tdx_cleanup() since KVM
doesn't actually teardown TDX). They don't match vt_init()/vt_exit(),
vmx_init()/vmx_exit() etc but it's not end of the world.
Also, once initialized, the TDX module cannot be disabled and enabled
again w/o the TDX module runtime update, which isn't supported by the
kernel. After TDX is enabled, nothing needs to be done when KVM
disables hardware virtualization, e.g., when offlining CPU, or during
suspend/resume. TDX host core-kernel code internally tracks TDX status
and can handle "multiple enabling" scenario.
Similar to KVM_AMD_SEV, add a new KVM_INTEL_TDX Kconfig to guide KVM TDX
code. Make it depend on INTEL_TDX_HOST but not replace INTEL_TDX_HOST
because in the longer term there's a use case that requires making
SEAMCALLs w/o KVM as mentioned by Dan [1].
Link: https://lore.kernel.org/6723fc2070a96_60c3294dc@dwillia2-mobl3.amr.corp.intel.com.notmuch/ [1]
Signed-off-by: Kai Huang <kai.huang@intel.com>
Message-ID: <162f9dee05c729203b9ad6688db1ca2960b4b502.1731664295.git.kai.huang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add vt_init() and vt_exit() as the new module init/exit functions and
refactor existing vmx_init()/vmx_exit() as helper to make room for TDX
specific initialization and teardown.
To support TDX, KVM will need to enable TDX during KVM module loading
time. Enabling TDX requires enabling hardware virtualization first so
that all online CPUs (and the new CPU going online) are in post-VMXON
state.
Currently, the vmx_init() flow is:
1) hv_init_evmcs(),
2) kvm_x86_vendor_init(),
3) Other VMX specific initialization,
4) kvm_init()
The kvm_x86_vendor_init() invokes kvm_x86_init_ops::hardware_setup() to
do VMX specific hardware setup and calls kvm_update_ops() to initialize
kvm_x86_ops to VMX's version.
TDX will have its own version for most of kvm_x86_ops callbacks. It
would be nice if kvm_x86_init_ops::hardware_setup() could also be used
for TDX, but in practice it cannot. The reason is, as mentioned above,
TDX initialization requires hardware virtualization having been enabled,
which must happen after kvm_update_ops(), but hardware_setup() is done
before that.
Also, TDX is based on VMX, and it makes sense to only initialize TDX
after VMX has been initialized. If VMX fails to initialize, TDX is
likely broken anyway.
So the new flow of KVM module init function will be:
1) Current VMX initialization code in vmx_init() before kvm_init(),
2) TDX initialization,
3) kvm_init()
Split vmx_init() into two parts based on above 1) and 3) so that TDX
initialization can fit in between. Make part 1) as the new helper
vmx_init(). Introduce vt_init() as the new module init function which
calls vmx_init() and kvm_init(). TDX initialization will be added
later.
Do the same thing for vmx_exit()/vt_exit().
Signed-off-by: Kai Huang <kai.huang@intel.com>
Message-ID: <3f23f24098bdcf42e213798893ffff7cdc7103be.1731664295.git.kai.huang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Intel TDX protects guest VMs from malicious host and certain physical
attacks. Pre-TDX Intel hardware has support for a memory encryption
architecture called MK-TME, which repurposes several high bits of
physical address as "KeyID". The BIOS reserves a sub-range of MK-TME
KeyIDs as "TDX private KeyIDs".
Each TDX guest must be assigned with a unique TDX KeyID when it is
created. The kernel reserves the first TDX private KeyID for
crypto-protection of specific TDX module data which has a lifecycle that
exceeds the KeyID reserved for the TD's use. The rest of the KeyIDs are
left for TDX guests to use.
Create a small KeyID allocator. Export
tdx_guest_keyid_alloc()/tdx_guest_keyid_free() to allocate and free TDX
guest KeyID for KVM to use.
Don't provide the stub functions when CONFIG_INTEL_TDX_HOST=n since they
are not supposed to be called in this case.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Message-ID: <20241030190039.77971-5-rick.p.edgecombe@intel.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM needs two classes of global metadata to create and run TDX guests:
- "TD Control Structures"
- "TD Configurability"
The first class contains the sizes of TDX guest per-VM and per-vCPU
control structures. KVM will need to use them to allocate enough space
for those control structures.
The second class contains info which reports things like which features
are configurable to TDX guest etc. KVM will need to use them to
properly configure TDX guests.
Read them for KVM TDX to use.
The code change is auto-generated by re-running the script in [1] after
uncommenting the "td_conf" and "td_ctrl" part to regenerate the
tdx_global_metadata.{hc} and update them to the existing ones in the
kernel.
#python tdx.py global_metadata.json tdx_global_metadata.h \
tdx_global_metadata.c
The 'global_metadata.json' can be fetched from [2].
Note that as of this writing, the JSON file only allows a maximum of 32
CPUID entries. While this is enough for current contents of the CPUID
leaves, there were plans to change the JSON per TDX module release which
would change the ABI and potentially prevent future versions of the TDX
module from working with older kernels.
While discussions are ongoing with the TDX module team on what exactly
constitutes an ABI breakage, in the meantime the TDX module team has
agreed to not increase the number of CPUID entries beyond 128 without
an opt in. Therefore the file was tweaked by hand to change the maximum
number of CPUID_CONFIGs.
Link: https://lore.kernel.org/kvm/0853b155ec9aac09c594caa60914ed6ea4dc0a71.camel@intel.com/ [1]
Link: https://cdrdv2.intel.com/v1/dl/getContent/795381 [2]
Signed-off-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Message-ID: <20241030190039.77971-4-rick.p.edgecombe@intel.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Adding all the information that KVM needs increases the size of struct
tdx_sys_info, to the point that you can get warnings about the stack
size of init_tdx_module(). Since KVM also needs to read the TDX metadata
after init_tdx_module() returns, make the variable a global.
Reviewed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Intel TDX protects guest VMs from malicious host and certain physical
attacks. The TDX module has the concept of flushing vCPUs. These flushes
include both a flush of the translation caches and also any other state
internal to the TDX module. Before freeing a KeyID, this flush operation
needs to be done. KVM will need to perform the flush on each pCPU
associated with the TD, and also perform a TD scoped operation that checks
if the flush has been done on all vCPU's associated with the TD.
Add a tdh_vp_flush() function to be used to call TDH.VP.FLUSH on each pCPU
associated with the TD during TD teardown. It will also be called when
disabling TDX and during vCPU migration between pCPUs.
Add tdh_mng_vpflushdone() to be used by KVM to call TDH.MNG.VPFLUSHDONE.
KVM will use this during TD teardown to verify that TDH.VP.FLUSH has been
called sufficiently, and advance the state machine that will allow for
reclaiming the TD's KeyID.
Co-developed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Reviewed-by: Yuan Yao <yuan.yao@intel.com>
Message-ID: <20241203010317.827803-7-rick.p.edgecombe@intel.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Intel TDX protects guest VMs from malicious host and certain physical
attacks. The TDX module has TD scoped and vCPU scoped "metadata fields".
These fields are a bit like VMCS fields, and stored in data structures
maintained by the TDX module. Export 3 SEAMCALLs for use in reading and
writing these fields:
Make tdh_mng_rd() use MNG.VP.RD to read the TD scoped metadata.
Make tdh_vp_rd()/tdh_vp_wr() use TDH.VP.RD/WR to read/write the vCPU
scoped metadata.
KVM will use these by creating inline helpers that target various metadata
sizes. Export the raw SEAMCALL leaf, to avoid exporting the large number
of various sized helpers.
Co-developed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Reviewed-by: Yuan Yao <yuan.yao@intel.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Message-ID: <20241203010317.827803-6-rick.p.edgecombe@intel.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Intel TDX protects guest VMs from malicious host and certain physical
attacks. The TDX module uses pages provided by the host for both control
structures and for TD guest pages. These pages are encrypted using the
MK-TME encryption engine, with its special requirements around cache
invalidation. For its own security, the TDX module ensures pages are
flushed properly and track which usage they are currently assigned. For
creating and tearing down TD VMs and vCPUs KVM will need to use the
TDH.PHYMEM.PAGE.RECLAIM, TDH.PHYMEM.CACHE.WB, and TDH.PHYMEM.PAGE.WBINVD
SEAMCALLs.
Add tdh_phymem_page_reclaim() to enable KVM to call
TDH.PHYMEM.PAGE.RECLAIM to reclaim the page for use by the host kernel.
This effectively resets its state in the TDX module's page tracking
(PAMT), if the page is available to be reclaimed. This will be used by KVM
to reclaim the various types of pages owned by the TDX module. It will
have a small wrapper in KVM that retries in the case of a relevant error
code. Don't implement this wrapper in arch/x86 because KVM's solution
around retrying SEAMCALLs will be better located in a single place.
Add tdh_phymem_cache_wb() to enable KVM to call TDH.PHYMEM.CACHE.WB to do
a cache write back in a way that the TDX module can verify, before it
allows a KeyID to be freed. The KVM code will use this to have a small
wrapper that handles retries. Since the TDH.PHYMEM.CACHE.WB operation is
interruptible, have tdh_phymem_cache_wb() take a resume argument to pass
this info to the TDX module for restarts. It is worth noting that this
SEAMCALL uses a SEAM specific MSR to do the write back in sections. In
this way it does export some new functionality that affects CPU state.
Add tdh_phymem_page_wbinvd_tdr() to enable KVM to call
TDH.PHYMEM.PAGE.WBINVD to do a cache write back and invalidate of a TDR,
using the global KeyID. The underlying TDH.PHYMEM.PAGE.WBINVD SEAMCALL
requires the related KeyID to be encoded into the SEAMCALL args. Since the
global KeyID is not exposed to KVM, a dedicated wrapper is needed for TDR
focused TDH.PHYMEM.PAGE.WBINVD operations.
Co-developed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Reviewed-by: Yuan Yao <yuan.yao@intel.com>
Message-ID: <20241203010317.827803-5-rick.p.edgecombe@intel.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Intel TDX protects guest VMs from malicious host and certain physical
attacks. It defines various control structures that hold state for
virtualized components of the TD (i.e. VMs or vCPUs) These control
structures are stored in pages given to the TDX module and encrypted
with either the global KeyID or the guest KeyIDs.
To manipulate these control structures the TDX module defines a few
SEAMCALLs. KVM will use these during the process of creating a vCPU as
follows:
1) Call TDH.VP.CREATE to create a TD vCPU Root (TDVPR) page for each
vCPU.
2) Call TDH.VP.ADDCX to add per-vCPU control pages (TDCX) for each vCPU.
3) Call TDH.VP.INIT to initialize the TDCX for each vCPU.
To reclaim these pages for use by the kernel other SEAMCALLs are needed,
which will be added in future patches.
Export functions to allow KVM to make these SEAMCALLs. Export two
variants for TDH.VP.CREATE, in order to support the planned logic of KVM
to support TDX modules with and without the ENUM_TOPOLOGY feature. If
KVM can drop support for the !ENUM_TOPOLOGY case, this could go down a
single version. Leave that for later discussion.
The TDX module provides SEAMCALLs to hand pages to the TDX module for
storing TDX controlled state. SEAMCALLs that operate on this state are
directed to the appropriate TD vCPU using references to the pages
originally provided for managing the vCPU's state. So the host kernel
needs to track these pages, both as an ID for specifying which vCPU to
operate on, and to allow them to be eventually reclaimed. The vCPU
associated pages are called TDVPR (Trust Domain Virtual Processor Root)
and TDCX (Trust Domain Control Extension).
Introduce "struct tdx_vp" for holding references to pages provided to the
TDX module for the TD vCPU associated state. Don't plan for any vCPU
associated state that is controlled by KVM to live in this struct. Only
expect it to hold data for concepts specific to the TDX architecture, for
which there can't already be preexisting storage for in KVM.
Add both the TDVPR page and an array of TDCX pages, even though the
SEAMCALL wrappers will only need to know about the TDVPR pages for
directing the SEAMCALLs to the right vCPU. Adding the TDCX pages to this
struct will let all of the vCPU associated pages handed to the TDX module be
tracked in one location. For a type to specify physical pages, use KVM's
hpa_t type. Do this for KVM's benefit This is the common type used to hold
physical addresses in KVM, so will make interoperability easier.
Co-developed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Reviewed-by: Yuan Yao <yuan.yao@intel.com>
Message-ID: <20241203010317.827803-4-rick.p.edgecombe@intel.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Intel TDX protects guest VMs from malicious hosts and certain physical
attacks. It defines various control structures that hold state for things
like TDs or vCPUs. These control structures are stored in pages given to
the TDX module and encrypted with either the global KeyID or the guest
KeyIDs.
To manipulate these control structures the TDX module defines a few
SEAMCALLs. KVM will use these during the process of creating a TD as
follows:
1) Allocate a unique TDX KeyID for a new guest.
1) Call TDH.MNG.CREATE to create a "TD Root" (TDR) page, together with
the new allocated KeyID. Unlike the rest of the TDX guest, the TDR
page is crypto-protected by the 'global KeyID'.
2) Call the previously added TDH.MNG.KEY.CONFIG on each package to
configure the KeyID for the guest. After this step, the KeyID to
protect the guest is ready and the rest of the guest will be protected
by this KeyID.
3) Call TDH.MNG.ADDCX to add TD Control Structure (TDCS) pages.
4) Call TDH.MNG.INIT to initialize the TDCS.
To reclaim these pages for use by the kernel other SEAMCALLs are needed,
which will be added in future patches.
Add tdh_mng_addcx(), tdh_mng_create() and tdh_mng_init() to export these
SEAMCALLs so that KVM can use them to create TDs.
For SEAMCALLs that give a page to the TDX module to be encrypted, CLFLUSH
the page mapped with KeyID 0, such that any dirty cache lines don't write
back later and clobber TD memory or control structures. Don't worry about
the other MK-TME KeyIDs because the kernel doesn't use them. The TDX docs
specify that this flush is not needed unless the TDX module exposes the
CLFLUSH_BEFORE_ALLOC feature bit. Be conservative and always flush. Add a
helper function to facilitate this.
Co-developed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Reviewed-by: Yuan Yao <yuan.yao@intel.com>
Message-ID: <20241203010317.827803-3-rick.p.edgecombe@intel.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Intel TDX protects guest VMs from malicious host and certain physical
attacks. Pre-TDX Intel hardware has support for a memory encryption
architecture called MK-TME, which repurposes several high bits of
physical address as "KeyID". TDX ends up with reserving a sub-range of
MK-TME KeyIDs as "TDX private KeyIDs".
Like MK-TME, these KeyIDs can be associated with an ephemeral key. For TDX
this association is done by the TDX module. It also has its own tracking
for which KeyIDs are in use. To do this ephemeral key setup and manipulate
the TDX module's internal tracking, KVM will use the following SEAMCALLs:
TDH.MNG.KEY.CONFIG: Mark the KeyID as in use, and initialize its
ephemeral key.
TDH.MNG.KEY.FREEID: Mark the KeyID as not in use.
These SEAMCALLs both operate on TDR structures, which are setup using the
previously added TDH.MNG.CREATE SEAMCALL. KVM's use of these operations
will go like:
- tdx_guest_keyid_alloc()
- Initialize TD and TDR page with TDH.MNG.CREATE (not yet-added), passing
KeyID
- TDH.MNG.KEY.CONFIG to initialize the key
- TD runs, teardown is started
- TDH.MNG.KEY.FREEID
- tdx_guest_keyid_free()
Don't try to combine the tdx_guest_keyid_alloc() and TDH.MNG.KEY.CONFIG
operations because TDH.MNG.CREATE and some locking need to be done in the
middle. Don't combine TDH.MNG.KEY.FREEID and tdx_guest_keyid_free() so they
are symmetrical with the creation path.
So implement tdh_mng_key_config() and tdh_mng_key_freeid() as separate
functions than tdx_guest_keyid_alloc() and tdx_guest_keyid_free().
The TDX module provides SEAMCALLs to hand pages to the TDX module for
storing TDX controlled state. SEAMCALLs that operate on this state are
directed to the appropriate TD VM using references to the pages originally
provided for managing the TD's state. So the host kernel needs to track
these pages, both as an ID for specifying which TD to operate on, and to
allow them to be eventually reclaimed. The TD VM associated pages are
called TDR (Trust Domain Root) and TDCS (Trust Domain Control Structure).
Introduce "struct tdx_td" for holding references to pages provided to the
TDX module for this TD VM associated state. Don't plan for any TD
associated state that is controlled by KVM to live in this struct. Only
expect it to hold data for concepts specific to the TDX architecture, for
which there can't already be preexisting storage for in KVM.
Add both the TDR page and an array of TDCS pages, even though the SEAMCALL
wrappers will only need to know about the TDR pages for directing the
SEAMCALLs to the right TD. Adding the TDCS pages to this struct will let
all of the TD VM associated pages handed to the TDX module be tracked in
one location. For a type to specify physical pages, use KVM's hpa_t type.
Do this for KVM's benefit This is the common type used to hold physical
addresses in KVM, so will make interoperability easier.
Co-developed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Reviewed-by: Yuan Yao <yuan.yao@intel.com>
Message-ID: <20241203010317.827803-2-rick.p.edgecombe@intel.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM_CAP_SYNC_REGS does not make sense for VMs with protected guest state,
since the register values cannot actually be written. Return 0
when using the VM-level KVM_CHECK_EXTENSION ioctl, and accordingly
return -EINVAL from KVM_RUN if the valid/dirty fields are nonzero.
However, on exit from KVM_RUN userspace could have placed a nonzero
value into kvm_run->kvm_valid_regs, so check guest_state_protected
again and skip store_regs() in that case.
Cc: stable@vger.kernel.org
Fixes: 517987e3fb ("KVM: x86: add fields to struct kvm_arch for CoCo features")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20250306202923.646075-1-pbonzini@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add guest_tsc_protected member to struct kvm_arch_vcpu and prohibit
changing TSC offset/multiplier when guest_tsc_protected is true.
X86 confidential computing technology defines protected guest TSC so that
the VMM can't change the TSC offset/multiplier once vCPU is initialized.
SEV-SNP defines Secure TSC as optional, whereas TDX mandates it.
KVM has common logic on x86 that tries to guess or adjust TSC
offset/multiplier for better guest TSC and TSC interrupt latency
at KVM vCPU creation (kvm_arch_vcpu_postcreate()), vCPU migration
over pCPU (kvm_arch_vcpu_load()), vCPU TSC device attributes
(kvm_arch_tsc_set_attr()) and guest/host writing to TSC or TSC adjust MSR
(kvm_set_msr_common()).
The current x86 KVM implementation conflicts with protected TSC because the
VMM can't change the TSC offset/multiplier.
Because KVM emulates the TSC timer or the TSC deadline timer with the TSC
offset/multiplier, the TSC timer interrupts is injected to the guest at the
wrong time if the KVM TSC offset is different from what the TDX module
determined.
Originally this issue was found by cyclic test of rt-test [1] as the
latency in TDX case is worse than VMX value + TDX SEAMCALL overhead. It
turned out that the KVM TSC offset is different from what the TDX module
determines.
Disable or ignore the KVM logic to change/adjust the TSC offset/multiplier
somehow, thus keeping the KVM TSC offset/multiplier the same as the
value of the TDX module. Writes to MSR_IA32_TSC are also blocked as
they amount to a change in the TSC offset.
[1] https://git.kernel.org/pub/scm/utils/rt-tests/rt-tests.git
Reported-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Message-ID: <3a7444aec08042fe205666864b6858910e86aa98.1728719037.git.isaku.yamahata@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Push down setting vcpu.arch.user_set_tsc to true from kvm_synchronize_tsc()
to __kvm_synchronize_tsc() so that the two callers don't have to modify
user_set_tsc directly as preparation.
Later, prohibit changing TSC synchronization for TDX guests to modify
__kvm_synchornize_tsc() change. We don't want to touch caller sites not to
change user_set_tsc.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Message-ID: <62b1a7a35d6961844786b6e47e8ecb774af7a228.1728719037.git.isaku.yamahata@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
TDX needs to free the TDR control structures last, after all paging structures
have been torn down; move the vm_destroy callback at a suitable place.
The new place is also okay for AMD; the main difference is that the
MMU has been torn down and, if anything, that is better done before
the SNP ASID is released.
Extracted from a patch by Yan Zhao.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently if architectures want to support HOTPLUG_SMT they need to
provide a topology_is_primary_thread() telling the framework which
thread in the SMT cannot offline. However arm64 doesn't have a
restriction on which thread in the SMT cannot offline, a simplest
choice is that just make 1st thread as the "primary" thread. So
just make this as the default implementation in the framework and
let architectures like x86 that have special primary thread to
override this function (which they've already done).
There's no need to provide a stub function if !CONFIG_SMP or
!CONFIG_HOTPLUG_SMT. In such case the testing CPU is already
the 1st CPU in the SMT so it's always the primary thread.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20250311075143.61078-2-yangyicong@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
There are some failure modes which lead to triple-faults in the
relocate_kernel() function, which is fairly much undebuggable
for normal mortals.
Adding a GDT in the relocate_kernel() environment is step 1 towards
being able to catch faults and do something more useful.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250312144257.2348250-2-dwmw2@infradead.org
Under VMware hypervisors, SEV-SNP enabled VMs are fundamentally able to boot
without UEFI, but this regressed a year ago due to:
0f4a1e8098 ("x86/sev: Skip ROM range scans and validation for SEV-SNP guests")
In this case, mpparse_find_mptable() has to be called to parse MP
tables which contains the necessary boot information.
[ mingo: Updated the changelog. ]
Fixes: 0f4a1e8098 ("x86/sev: Skip ROM range scans and validation for SEV-SNP guests")
Co-developed-by: Ye Li <ye.li@broadcom.com>
Signed-off-by: Ye Li <ye.li@broadcom.com>
Signed-off-by: Ajay Kaher <ajay.kaher@broadcom.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Ye Li <ye.li@broadcom.com>
Reviewed-by: Kevin Loughlin <kevinloughlin@google.com>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20250313173111.10918-1-ajay.kaher@broadcom.com
Current minimum required version of binutils is 2.25, which
supports XSAVE{,OPT,C,S} and XRSTOR{,S} instruction mnemonics.
Replace the byte-wise specification of XSAVE{,OPT,C,S}
and XRSTOR{,S} with these proper mnemonics.
No functional change intended.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250313130251.383204-1-ubizjak@gmail.com
To permit the EFI stub to call this code even when building the kernel
without the legacy decompressor, move the trampoline out of the latter's
startup code.
This is part of an ongoing WIP effort on my part to make the existing,
generic EFI zboot format work on x86 as well.
No functional change intended.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250313120324.1095968-2-ardb+git@google.com
Even though no uses of the bzImage CRC-32 checksum are known, ensure
that the last 4 bytes of the image are unused zero bytes, so that the
checksum can be generated post-build if needed.
[ mingo: Added the 'obsolete' qualifier to the comment. ]
Suggested-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Ian Campbell <ijc@hellion.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250312081204.521411-2-ardb+git@google.com
Each of get_{mon,ctrl}_domain_from_cpu() only has one caller.
Once the filesystem code is moved to /fs/, there is no equivalent to
core.c.
Move these functions to each live next to their caller. This allows
them to be made static and the header file entries to be removed.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-31-james.morse@arm.com
get_config_index() is used by the architecture specific code to map
a CLOSID+type pair to an index in the configuration arrays.
MPAM needs to do this too to preserve the ABI to user-space, there is no
reason to do it differently.
Move the helper to a header file to allow all architectures that either
use or emulate CDP to use the same pattern of CLOSID values. Moving
this to a header file means it must be marked inline, which matches
the existing compiler choice for this static function.
Co-developed-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-30-james.morse@arm.com
Now that the visibility of throttle_mode is being managed by resctrl, it
should consider resources other than MBA that may have a throttle_mode. SMBA
is one such resource.
Extend thread_throttle_mode_init() to check SMBA for a throttle_mode.
Adding support for multiple resources means it is possible for a platform with
both MBA and SMBA, but an undefined throttle_mode on one of them to make the
file visible.
Add the 'undefined' case to rdt_thread_throttle_mode_show().
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-29-james.morse@arm.com
resctrl_file_fflags_init() is called from the architecture specific code to
make the 'thread_throttle_mode' file visible. The architecture specific code
has already set the membw.throttle_mode in the rdt_resource.
This forces the RFTYPE flags used by resctrl to be exposed to the architecture
specific code.
This doesn't need to be specific to the architecture, the throttle_mode can be
used by resctrl to determine if the 'thread_throttle_mode' file should be
visible. This allows the RFTYPE flags to be private to resctrl.
Add thread_throttle_mode_init(), and use it to call resctrl_file_fflags_init()
from resctrl_init(). This avoids publishing an extra function between the
architecture and filesystem code.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-28-james.morse@arm.com
resctrl_arch_pseudo_lock_fn() has architecture specific behaviour,
and takes a struct rdtgroup as an argument.
After the filesystem code moves to /fs/, the definition of struct
rdtgroup will not be available to the architecture code.
The only reason resctrl_arch_pseudo_lock_fn() wants the rdtgroup is
for the CLOSID. Embed that in the pseudo_lock_region as a closid,
and move the definition of struct pseudo_lock_region to resctrl.h.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-27-james.morse@arm.com
prefetch_disable_bits is set by rdtgroup_locksetup_enter() from a value
provided by the architecture, but is largely read by other architecture
helpers.
Make resctrl_arch_get_prefetch_disable_bits() set prefetch_disable_bits so
that it can be isolated to arch-code from where the other arch-code helpers
can use its cached value.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-26-james.morse@arm.com
Pseudo-lock relies on knowledge of the micro-architecture to disable
prefetchers etc.
On arm64 these controls are typically secure only, meaning Linux can't access
them. Arm's cache-lockdown feature works in a very different way. Resctrl's
pseudo-lock isn't going to be used on arm64 platforms.
Add a Kconfig symbol that can be selected by the architecture. This enables or
disables building of the pseudo_lock.c file, and replaces the functions with
stubs. An additional IS_ENABLED() check is needed in rdtgroup_mode_write() so
that attempting to enable pseudo-lock reports an "Unknown or unsupported mode"
to user-space via the last_cmd_status file.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-25-james.morse@arm.com
resctrl's pseudo lock has some copy-to-cache and measurement functions that
are micro-architecture specific.
For example, pseudo_lock_fn() is not at all portable.
Label these 'resctrl_arch_' so they stay under /arch/x86. To expose these
functions to the filesystem code they need an entry in a header file, and
can't be marked static.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-24-james.morse@arm.com
The mbm_cfg_mask field lists the bits that user-space can set when configuring
an event. This value is output via the last_cmd_status file.
Once the filesystem parts of resctrl are moved to live in /fs/, the struct
rdt_hw_resource is inaccessible to the filesystem code. Because this value is
output to user-space, it has to be accessible to the filesystem code.
Move it to struct rdt_resource.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-23-james.morse@arm.com
mba_mbps_default_event is initialised based on whether mbm_local or mbm_total
is supported. In the case of both, it is initialised to mbm_local.
mba_mbps_default_event is initialised in core.c's get_rdt_mon_resources(),
while all the readers are in rdtgroup.c.
After this code is split into architecture-specific and filesystem code,
get_rdt_mon_resources() remains part of the architecture code, which would
mean mba_mbps_default_event has to be exposed by the filesystem code.
Move the initialisation to the filesystem's resctrl_mon_resource_init().
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-22-james.morse@arm.com
mon_event_config_{read,write}() are called via IPI and access model specific
registers to do their work.
To support another architecture, this needs abstracting.
Rename mon_event_config_{read,write}() to have a "resctrl_arch_" prefix, and
move their struct mon_config_info parameter into <linux/resctrl.h>. This
allows another architecture to supply an implementation of these.
As struct mon_config_info is now exposed globally, give it a 'resctrl_'
prefix. MPAM systems need access to the domain to do this work, add the
resource and domain to struct resctrl_mon_config_info.
Co-developed-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-21-james.morse@arm.com
When BMEC is supported the resctrl event can be configured in a number of
ways. This depends on architecture support. rdt_get_mon_l3_config() modifies
the struct mon_evt and calls resctrl_file_fflags_init() to create the files
that allow the configuration.
Splitting this into separate architecture and filesystem parts would require
the struct mon_evt and resctrl_file_fflags_init() to be exposed.
Instead, add resctrl_arch_is_evt_configurable(), and use this from
resctrl_mon_resource_init() to initialise struct mon_evt and call
resctrl_file_fflags_init().
resctrl_arch_is_evt_configurable() calls rdt_cpu_has() so it doesn't obviously
benefit from being inlined. Putting it in core.c will allow rdt_cpu_has() to
eventually become static.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-20-james.morse@arm.com
The architecture specific parts of resctrl provide helpers like
is_mbm_total_enabled() and is_mbm_local_enabled() to hide accesses to the
rdt_mon_features bitmap.
Exposing a group of helpers between the architecture and filesystem code is
preferable to a single unsigned-long like rdt_mon_features. Helpers can be more
readable and have a well defined behaviour, while allowing architectures to hide
more complex behaviour.
Once the filesystem parts of resctrl are moved, these existing helpers can no
longer live in internal.h. Move them to include/linux/resctrl.h Once these are
exposed to the wider kernel, they should have a 'resctrl_arch_' prefix, to fit
the rest of the arch<->fs interface.
Move and rename the helpers that touch rdt_mon_features directly. is_mbm_event()
and is_mbm_enabled() are only called from rdtgroup.c, so can be moved into that
file.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-19-james.morse@arm.com
The for_each_*_rdt_resource() helpers walk the architecture's array of
structures, using the resctrl visible part as an iterator. These became
over-complex when the structures were split into a filesystem and
architecture-specific struct. This approach avoided the need to touch every
call site, and was done before there was a helper to retrieve a resource by
rid.
Once the filesystem parts of resctrl are moved to /fs/, both the arch's
resource array, and the definition of those structures is no longer
accessible. To support resctrl, each architecture would have to provide
equally complex macros.
Rewrite the macro to make use of resctrl_arch_get_resource(), and move these
to include/linux/resctrl.h so existing x86 arch code continues to use them.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-18-james.morse@arm.com
rdt_get_mon_l3_config() is called from the arch's resctrl_arch_late_init(),
and initialises both architecture specific fields, such as hw_res->mon_scale
and resctrl filesystem fields by calling dom_data_init().
To separate the filesystem and architecture parts of resctrl, this function
needs splitting up.
Add resctrl_mon_resource_init() to do the filesystem specific work, and call
it from resctrl_init(). This runs later, but is still before the filesystem is
mounted and the rmid_ptrs[] array can be used.
[ bp: Massage commit message. ]
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-17-james.morse@arm.com
rdt_put_mon_l3_config() is called via the architecture's resctrl_arch_exit()
call, and appears to free the rmid_ptrs[] and closid_num_dirty_rmid[] arrays.
In reality this code is marked __exit, and is removed by the linker as resctrl
can't be built as a module.
To separate the filesystem and architecture parts of resctrl, this free()ing
work needs to be triggered by the filesystem, as these structures belong to
the filesystem code.
Rename rdt_put_mon_l3_config() to resctrl_mon_resource_exit() and call it from
resctrl_exit(). The kfree() is currently dependent on r->mon_capable.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-16-james.morse@arm.com
On umount(), resctrl resets each resource back to its default configuration.
It only ever does this for all resources in one go.
reset_all_ctrls() is architecture specific as it works with struct
rdt_hw_resource.
Make reset_all_ctrls() an arch helper that resets one resource.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-15-james.morse@arm.com
When resctrl is fully factored into core and per-arch code, each arch will
need to use some resctrl common definitions in order to define its own
specializations and helpers. Following conventional practice, it would be
desirable to put the dependent arch definitions in an <asm/resctrl.h> header
that is included by the common <linux/resctrl.h> header. However, this can
make it awkward to avoid a circular dependency between <linux/resctrl.h> and
the arch header.
To avoid such dependencies, move the affected common types and constants into
a new header that does not need to depend on <linux/resctrl.h> or on the arch
headers.
The same logic applies to the monitor-configuration defines, move these too.
Some kind of enumeration for events is needed between the filesystem and
architecture code. Take the x86 definition as its convenient for x86.
The definition of enum resctrl_event_id is needed to allow the architecture
code to define resctrl_arch_mon_ctx_alloc() and resctrl_arch_mon_ctx_free().
The definition of enum resctrl_res_level is needed to allow the architecture
code to define resctrl_arch_set_cdp_enabled() and
resctrl_arch_get_cdp_enabled().
The bits for mbm_local_bytes_config et al are ABI, and must be the same on all
architectures. These are documented in Documentation/arch/x86/resctrl.rst
The maintainers entry for these headers was missed when resctrl.h was created.
Add a wildcard entry to match both resctrl.h and resctrl_types.h.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-14-james.morse@arm.com
rdt_find_domain() finds a domain given a resource and a cache-id. This is
used by both the architecture code and the filesystem code.
After the filesystem code moves to live in /fs/, this helper is either
duplicated by all architectures, or needs exposing by the filesystem code.
Add the declaration to the global header file. As it's now globally visible,
and has only a handful of callers, swap the 'rdt' for 'resctrl'. Move the
function to live with its caller in ctrlmondata.c as the filesystem code will
not have anything corresponding to core.c.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-13-james.morse@arm.com
rdtgroup_init() needs exposing to the rest of the kernel so that arch code can
call it once it lives in core code. As this is one of the few functions
exposed, rename it to have "resctrl" in the name. The same goes for the exit
call.
Rename x86's arch code init functions for RDT to have an arch prefix to make
it clear these are part of the architecture code.
Co-developed-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-12-james.morse@arm.com
update_cpu_closid_rmid() takes a struct rdtgroup as an argument, which it uses
to update the local CPUs default pqr values. This is a problem once the
resctrl parts move out to /fs/, as the arch code cannot poke around inside
struct rdtgroup.
Rename update_cpu_closid_rmid() as resctrl_arch_sync_cpus_defaults() to be
used as the target of an IPI, and pass the effective CLOSID and RMID in a new
struct.
Co-developed-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-11-james.morse@arm.com
rdtgroup_rmdir_ctrl() and rdtgroup_rmdir_mon() set the per-CPU pqr_state for
CPUs that were part of the rmdir()'d group.
Another architecture might not have a 'pqr_state', its hardware may need the
values in a different format. MPAM's equivalent of RMID values are not unique,
and always need the CLOSID to be provided too.
There is only one caller that modifies a single value, (rdtgroup_rmdir_mon()).
MPAM always needs both CLOSID and RMID for the hardware value as these are
written to the same system register.
As rdtgroup_rmdir_mon() has the CLOSID on hand, only provide a helper to set
both values. These values are read by __resctrl_sched_in(), but may be written
by a different CPU without any locking, add READ/WRTE_ONCE() to avoid torn
values.
Co-developed-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-10-james.morse@arm.com
The struct rdt_resource default_ctrl is used by both the architecture code for
resetting the hardware controls, and sometimes by the filesystem code as the
default value for the schema, unless the bandwidth software controller is in
use.
Having the default exposed by the architecture code causes unnecessary
duplication for each architecture as the default value must be specified, but
can be derived from other schema properties. Now that the maximum bandwidth is
explicitly described, resctrl can derive the default value from the schema
format and the other resource properties.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-9-james.morse@arm.com
__rdt_get_mem_config_amd() and __get_mem_config_intel() both use the
default_ctrl property as a maximum value. This is because the MBA schema works
differently between these platforms. Doing this complicates determining
whether the default_ctrl property belongs to the arch code, or can be derived
from the schema format.
Deriving the maximum or default value from the schema format would avoid the
architecture code having to tell resctrl such obvious things as the maximum
percentage is 100, and the maximum bitmap is all ones.
Maximum bandwidth is always going to vary per platform. Add max_bw as
a special case. This is currently used for the maximum MBA percentage on Intel
platforms, but can be removed from the architecture code if 'percentage'
becomes a schema format resctrl supports directly.
This value isn't needed for other schema formats.
This will allow the default_ctrl to be generated from the schema properties
when it is needed.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-8-james.morse@arm.com
The resctrl architecture code provides a data_width for the controls of each
resource. This is used to zero pad all control values in the schemata file so
they appear in columns. The same is done with the resource names to complete
the visual effect. e.g.
| SMBA:0=2048
| L3:0=00ff
AMD platforms discover their maximum bandwidth for the MB resource from
firmware, but hard-code the data_width to 4. If the maximum bandwidth requires
more digits - the tabular format is silently broken. This is also broken when
the mba_MBps mount option is used as the field width isn't updated. If new
schema are added resctrl will need to be able to determine the maximum width.
The benefit of this pretty-printing is questionable.
Instead of handling runtime discovery of the data_width for AMD platforms,
remove the feature. These fields are always zero padded so should be harmless
to remove if the whole field has been treated as a number. In the above
example, this would now look like this:
| SMBA:0=2048
| L3:0=ff
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-7-james.morse@arm.com
Resctrl's architecture code gets to specify a format string that is
used when printing schema entries. This is expected to be one of two
values that the filesystem code supports.
Setting this format string allows the architecture code to change
the ABI resctrl presents to user-space.
Instead, use the schema format enum to choose which format string to
use.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-6-james.morse@arm.com
Resctrl's architecture code gets to specify a function pointer that is used
when parsing schema entries. This is expected to be one of two helpers from
the filesystem code.
Setting this function pointer allows the architecture code to change the ABI
resctrl presents to user-space, and forces resctrl to expose these helpers.
Instead, add a schema format enum to choose which schema parser to use. This
allows the helpers to be made static and the structs used for passing
arguments moved out of shared headers.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-5-james.morse@arm.com
The resctrl arch code specifies whether a resource controls a cache or memory
using the fflags field. This field is then used by resctrl to determine which
files should be exposed in the filesystem.
Allowing the architecture to pick this value means the RFTYPE_ flags have to
be in a shared header, and allows an architecture to create a combination that
resctrl does not support.
Remove the fflags field, and pick the value based on the resource id.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-4-james.morse@arm.com
Resctrl occasionally wants to know something about a specific resource, in
these cases it reaches into the arch code's rdt_resources_all[] array.
Once the filesystem parts of resctrl are moved to /fs/, this means it will
need visibility of the architecture specific struct rdt_hw_resource
definition, and the array of all resources. All architectures would also need
a r_resctrl member in this struct.
Instead, abstract this via a helper to allow architectures to do different
things here. Move the level enum to the resctrl header and add a helper to
retrieve the struct rdt_resource by 'rid'.
resctrl_arch_get_resource() should not return NULL for any value in the enum,
it may instead return a dummy resource that is !alloc_enabled && !mon_enabled.
Co-developed-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-3-james.morse@arm.com
Commit
6eac36bb9e ("x86/resctrl: Allocate the cleanest CLOSID by searching closid_num_dirty_rmid")
added logic that causes resctrl to search for the CLOSID with the fewest dirty
cache lines when creating a new control group, if requested by the arch code.
This depends on the values read from the llc_occupancy counters. The logic is
applicable to architectures where the CLOSID effectively forms part of the
monitoring identifier and so do not allow complete freedom to choose an unused
monitoring identifier for a given CLOSID.
This support missed that some platforms may not have these counters. This
causes a NULL pointer dereference when creating a new control group as the
array was not allocated by dom_data_init().
As this feature isn't necessary on platforms that don't have cache occupancy
monitors, add this to the check that occurs when a new control group is
allocated.
Fixes: 6eac36bb9e ("x86/resctrl: Allocate the cleanest CLOSID by searching closid_num_dirty_rmid")
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-2-james.morse@arm.com
Instead of using a custom script to detect and fail on undefined
references, use --no-undefined for all VDSO linker invocations.
Drop the now unused checkundef.sh script.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250306-vdso-checkundef-v2-1-a26cc315fd73@linutronix.de
When extra warnings are enabled, the cc_mask definition in <asm/coco.h>
causes a build failure with GCC:
arch/x86/include/asm/coco.h:28:18: error: 'cc_mask' defined but not used [-Werror=unused-const-variable=]
28 | static const u64 cc_mask = 0;
Add a cc_get_mask() function mirroring cc_set_mask() for the one
user of the variable outside of the CoCo implementation.
Fixes: a0a8d15a79 ("x86/tdx: Preserve shared bit on mprotect()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250310131114.2635497-1-arnd@kernel.org
--
v2: use an inline helper instead of a __maybe_unused annotaiton.
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmfOKBUeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG1aQH/iC+Oyij4VxAjBek
BOXIT/p6CwlIXb8ObiWWcRjDPizlcxb3RaV8J2RO+IqaQ2wltxpFANq2G7Re2FPm
SNcEpIURAOVcxHGedcfFA91srO5F4FzNTO8LVp7MIbcgMYy3pdk+dbZmi6A691R+
t9pb74m+MAnF1o/MUx7pUlhAT/4ymuuR0F7WCSg4h0Xwe5m0nlJY89kJBC7PCjyd
n3mdhsz3rDSLmt/z/T7HGD89r8sYSvm9cOKtL3ELgGTrm7boQV8ii9Y9w04DI8PQ
JmIernugcCxmhH36mVUAHgJf2+/T388xFUh/D5+skeUOUZpaJZG866rnb32WpsHc
eWLFUeg=
=Wypt
-----END PGP SIGNATURE-----
Merge 6.14-rc6 into driver-core-next
We need the driver core fix in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For handling the 0 <= len < sizeof(unsigned long) bytes left at the end,
do a 4-2-1 step-down instead of a byte-at-a-time loop. This allows
taking advantage of wider CRC instructions. Note that crc32c-3way.S
already uses this same optimization too.
crc_kunit shows an improvement of about 25% for len=127.
Suggested-by: "H. Peter Anvin" <hpa@zytor.com>
Acked-by: Uros Bizjak <ubizjak@gmail.com>
Link: https://lore.kernel.org/r/20250304213216.108925-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Currently, load_microcode_amd() iterates over all NUMA nodes, retrieves their
CPU masks and unconditionally accesses per-CPU data for the first CPU of each
mask.
According to Documentation/admin-guide/mm/numaperf.rst:
"Some memory may share the same node as a CPU, and others are provided as
memory only nodes."
Therefore, some node CPU masks may be empty and wouldn't have a "first CPU".
On a machine with far memory (and therefore CPU-less NUMA nodes):
- cpumask_of_node(nid) is 0
- cpumask_first(0) is CONFIG_NR_CPUS
- cpu_data(CONFIG_NR_CPUS) accesses the cpu_info per-CPU array at an
index that is 1 out of bounds
This does not have any security implications since flashing microcode is
a privileged operation but I believe this has reliability implications by
potentially corrupting memory while flashing a microcode update.
When booting with CONFIG_UBSAN_BOUNDS=y on an AMD machine that flashes
a microcode update. I get the following splat:
UBSAN: array-index-out-of-bounds in arch/x86/kernel/cpu/microcode/amd.c:X:Y
index 512 is out of range for type 'unsigned long[512]'
[...]
Call Trace:
dump_stack
__ubsan_handle_out_of_bounds
load_microcode_amd
request_microcode_amd
reload_store
kernfs_fop_write_iter
vfs_write
ksys_write
do_syscall_64
entry_SYSCALL_64_after_hwframe
Change the loop to go over only NUMA nodes which have CPUs before determining
whether the first CPU on the respective node needs microcode update.
[ bp: Massage commit message, fix typo. ]
Fixes: 7ff6edf4fe ("x86/microcode/AMD: Fix mixed steppings support")
Signed-off-by: Florent Revest <revest@chromium.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250310144243.861978-1-revest@chromium.org
The kernel requires X86_FEATURE_SGX_LC to be able to create SGX enclaves,
not just X86_FEATURE_SGX.
There is quite a number of hardware which has X86_FEATURE_SGX but not
X86_FEATURE_SGX_LC. A kernel running on such hardware does not create
the /dev/sgx_enclave file and does so silently.
Explicitly warn if X86_FEATURE_SGX_LC is not enabled to properly notify
users that the kernel disabled the SGX driver.
The X86_FEATURE_SGX_LC, a.k.a. SGX Launch Control, is a CPU feature
that enables LE (Launch Enclave) hash MSRs to be writable (with
additional opt-in required in the 'feature control' MSR) when running
enclaves, i.e. using a custom root key rather than the Intel proprietary
key for enclave signing.
I've hit this issue myself and have spent some time researching where
my /dev/sgx_enclave file went on SGX-enabled hardware.
Related links:
https://github.com/intel/linux-sgx/issues/837https://patchwork.kernel.org/project/platform-driver-x86/patch/20180827185507.17087-3-jarkko.sakkinen@linux.intel.com/
[ mingo: Made the error message a bit more verbose, and added other cases
where the kernel fails to create the /dev/sgx_enclave device node. ]
Signed-off-by: Vladis Dronov <vdronov@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Kai Huang <kai.huang@intel.com>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250309172215.21777-2-vdronov@redhat.com
__module_address() can be invoked within a RCU section, there is no
requirement to have preemption disabled.
Replace the preempt_disable() section around __module_address() with
RCU.
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250108090457.512198-23-bigeasy@linutronix.de
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
The hypercall in hv_mark_gpa_visibility() is invoked with an input
argument and an output argument. The output argument ostensibly returns
the number of pages that were processed. But in fact, the hypercall does
not provide any output, so the output argument is spurious.
The spurious argument is harmless because Hyper-V ignores it, but in the
interest of correctness and to avoid the potential for future problems,
remove it.
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Link: https://lore.kernel.org/r/20250226200612.2062-2-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20250226200612.2062-2-mhklinux@outlook.com>
* Fix a couple of bugs affecting pKVM's PSCI relay implementation
when running in the hVHE mode, resulting in the host being entered
with the MMU in an unknown state, and EL2 being in the wrong mode.
x86:
* Set RFLAGS.IF in C code on SVM to get VMRUN out of the STI shadow.
* Ensure DEBUGCTL is context switched on AMD to avoid running the guest with
the host's value, which can lead to unexpected bus lock #DBs.
* Suppress DEBUGCTL.BTF on AMD (to match Intel), as KVM doesn't properly
emulate BTF. KVM's lack of context switching has meant BTF has always been
broken to some extent.
* Always save DR masks for SNP vCPUs if DebugSwap is *supported*, as the guest
can enable DebugSwap without KVM's knowledge.
* Fix a bug in mmu_stress_tests where a vCPU could finish the "writes to RO
memory" phase without actually generating a write-protection fault.
* Fix a printf() goof in the SEV smoke test that causes build failures with
-Werror.
* Explicitly zero EAX and EBX in CPUID.0x8000_0022 output when PERFMON_V2
isn't supported by KVM.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmfNSeUUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNKngf/cLgQAT9AF4nFqcwh5b5uucKHVJ8W
uTiGlWqLAf2UN53L63eZ/7vKQWGQYkOTFvormR14Jam6IYtytsZw1xLBH4fGtUyB
qVjk0EPzaKGqn3LrgyneQNCXdyxJv7EBVBgoOKH0pvOksoW2E5ZizhhtRFtL7nCE
Yk8FQKpP0mIBk04RMsvzJVEFKIb4OZgJadWo0gryg1oF2aAv7mxQjyqUWsBDsb3q
99c0ElSBfV39FeT8xeok4k7S5jbBWii2KiaH72ZsNiBu0rYmEuLwIoygCNNWL9Wu
FPdQ+r//YrzfCJSXwGPfdUaRaF4p2642S6oiXQuusNNUmhK6/MRo3mZo8A==
=XQHm
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"arm64:
- Fix a couple of bugs affecting pKVM's PSCI relay implementation
when running in the hVHE mode, resulting in the host being entered
with the MMU in an unknown state, and EL2 being in the wrong mode
x86:
- Set RFLAGS.IF in C code on SVM to get VMRUN out of the STI shadow
- Ensure DEBUGCTL is context switched on AMD to avoid running the
guest with the host's value, which can lead to unexpected bus lock
#DBs
- Suppress DEBUGCTL.BTF on AMD (to match Intel), as KVM doesn't
properly emulate BTF. KVM's lack of context switching has meant BTF
has always been broken to some extent
- Always save DR masks for SNP vCPUs if DebugSwap is *supported*, as
the guest can enable DebugSwap without KVM's knowledge
- Fix a bug in mmu_stress_tests where a vCPU could finish the "writes
to RO memory" phase without actually generating a write-protection
fault
- Fix a printf() goof in the SEV smoke test that causes build
failures with -Werror
- Explicitly zero EAX and EBX in CPUID.0x8000_0022 output when
PERFMON_V2 isn't supported by KVM"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Explicitly zero EAX and EBX when PERFMON_V2 isn't supported by KVM
KVM: selftests: Fix printf() format goof in SEV smoke test
KVM: selftests: Ensure all vCPUs hit -EFAULT during initial RO stage
KVM: SVM: Don't rely on DebugSwap to restore host DR0..DR3
KVM: SVM: Save host DR masks on CPUs with DebugSwap
KVM: arm64: Initialize SCTLR_EL1 in __kvm_hyp_init_cpu()
KVM: arm64: Initialize HCR_EL2.E2H early
KVM: x86: Snapshot the host's DEBUGCTL after disabling IRQs
KVM: SVM: Manually context switch DEBUGCTL if LBR virtualization is disabled
KVM: x86: Snapshot the host's DEBUGCTL in common x86
KVM: SVM: Suppress DEBUGCTL.BTF on AMD
KVM: SVM: Drop DEBUGCTL[5:2] from guest's effective value
KVM: selftests: Assert that STI blocking isn't set after event injection
KVM: SVM: Set RFLAGS.IF=1 in C code, to get VMRUN out of the STI shadow
- Set RFLAGS.IF in C code on SVM to get VMRUN out of the STI shadow.
- Ensure DEBUGCTL is context switched on AMD to avoid running the guest with
the host's value, which can lead to unexpected bus lock #DBs.
- Suppress DEBUGCTL.BTF on AMD (to match Intel), as KVM doesn't properly
emulate BTF. KVM's lack of context switching has meant BTF has always been
broken to some extent.
- Always save DR masks for SNP vCPUs if DebugSwap is *supported*, as the guest
can enable DebugSwap without KVM's knowledge.
- Fix a bug in mmu_stress_tests where a vCPU could finish the "writes to RO
memory" phase without actually generating a write-protection fault.
- Fix a printf() goof in the SEV smoke test that causes build failures with
-Werror.
- Explicitly zero EAX and EBX in CPUID.0x8000_0022 output when PERFMON_V2
isn't supported by KVM.
-----BEGIN PGP SIGNATURE-----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=as6u
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-fixes-6.14-rcN.2' of https://github.com/kvm-x86/linux into HEAD
KVM x86 fixes for 6.14-rcN #2
- Set RFLAGS.IF in C code on SVM to get VMRUN out of the STI shadow.
- Ensure DEBUGCTL is context switched on AMD to avoid running the guest with
the host's value, which can lead to unexpected bus lock #DBs.
- Suppress DEBUGCTL.BTF on AMD (to match Intel), as KVM doesn't properly
emulate BTF. KVM's lack of context switching has meant BTF has always been
broken to some extent.
- Always save DR masks for SNP vCPUs if DebugSwap is *supported*, as the guest
can enable DebugSwap without KVM's knowledge.
- Fix a bug in mmu_stress_tests where a vCPU could finish the "writes to RO
memory" phase without actually generating a write-protection fault.
- Fix a printf() goof in the SEV smoke test that causes build failures with
-Werror.
- Explicitly zero EAX and EBX in CPUID.0x8000_0022 output when PERFMON_V2
isn't supported by KVM.
The test for the changeabitily of AC and ID EFLAGS is used to
distinguish between i386 and i486 processors (AC) and to test
for CPUID instruction support (ID).
Skip these tests on x86_64 processors as they always supports CPUID.
Also change the return type of has_eflag() to bool.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20250307091022.181136-1-ubizjak@gmail.com
The use of -ffreestanding is a leftover that is only needed for certain
versions of Clang. Adjust this to be Clang-only. A later patch will make
this a versioned check.
Acked-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20250308042929.1753543-1-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
To support multiple PTP clocks, the VDSO data structure needs to be
reworked. All clock specific data will end up in struct vdso_clock and in
struct vdso_time_data there will be array of VDSO clocks. At the moment,
vdso_clock is simply a define which maps vdso_clock to vdso_time_data.
To prepare for the rework of the data structures, replace the struct
vdso_time_data pointer with a struct vdso_clock pointer where applicable.
No functional change.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250303-vdso-clock-v1-15-c1b5c69a166f@linutronix.de
Andy reported the following build warning from head_32.S:
In file included from arch/x86/kernel/head_32.S:29:
arch/x86/include/asm/pgtable_32.h:59:5: error: "PTRS_PER_PMD" is not defined, evaluates to 0 [-Werror=undef]
59 | #if PTRS_PER_PMD > 1
The reason is that on 2-level i386 paging the folded in PMD's
PTRS_PER_PMD constant is not defined in assembly headers,
only in generic MM C headers.
Instead of trying to fish out the definition from the generic
headers, just define it - it even has a comment for it already...
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/Z8oa8AUVyi2HWfo9@gmail.com
Apart from some sanity checks on the size of setup.bin, the only
remaining task carried out by the arch/x86/boot/tools/build.c build tool
is generating the CRC-32 checksum of the bzImage. This feature was added
in commit
7d6e737c8d ("x86: add a crc32 checksum to the kernel image.")
without any motivation (or any commit log text, for that matter). This
checksum is not verified by any known bootloader, and given that
a) the checksum of the entire bzImage is reported by most tools (zlib,
rhash) as 0xffffffff and not 0x0 as documented,
b) the checksum is corrupted when the image is signed for secure boot,
which means that no distro ships x86 images with valid CRCs,
it seems quite unlikely that this checksum is being used, so let's just
drop it, along with the tool that generates it.
Instead, use simple file concatenation and truncation to combine the two
pieces into bzImage, and replace the checks on the size of the setup
block with a couple of ASSERT()s in the linker script.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ian Campbell <ijc@hellion.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250307164801.885261-2-ardb+git@google.com
Compared to the SNP Guest Request, the "Extended" version adds data pages for
receiving certificates. If not enough pages provided, the HV can report to the
VM how much is needed so the VM can reallocate and repeat.
Commit
ae596615d9 ("virt: sev-guest: Reduce the scope of SNP command mutex")
moved handling of the allocated/desired pages number out of scope of said
mutex and create a possibility for a race (multiple instances trying to
trigger Extended request in a VM) as there is just one instance of
snp_msg_desc per /dev/sev-guest and no locking other than snp_cmd_mutex.
Fix the issue by moving the data blob/size and the GHCB input struct
(snp_req_data) into snp_guest_req which is allocated on stack now and accessed
by the GHCB caller under that mutex.
Stop allocating SEV_FW_BLOB_MAX_SIZE in snp_msg_alloc() as only one of four
callers needs it. Free the received blob in get_ext_report() right after it is
copied to the userspace. Possible future users of snp_send_guest_request() are
likely to have different ideas about the buffer size anyways.
Fixes: ae596615d9 ("virt: sev-guest: Reduce the scope of SNP command mutex")
Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Nikunj A Dadhania <nikunj@amd.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250307013700.437505-3-aik@amd.com
Xen doesn't offer MSR_FAM10H_MMIO_CONF_BASE to all guests. This results
in the following warning:
unchecked MSR access error: RDMSR from 0xc0010058 at rIP: 0xffffffff8101d19f (xen_do_read_msr+0x7f/0xa0)
Call Trace:
xen_read_msr+0x1e/0x30
amd_get_mmconfig_range+0x2b/0x80
quirk_amd_mmconfig_area+0x28/0x100
pnp_fixup_device+0x39/0x50
__pnp_add_device+0xf/0x150
pnp_add_device+0x3d/0x100
pnpacpi_add_device_handler+0x1f9/0x280
acpi_ns_get_device_callback+0x104/0x1c0
acpi_ns_walk_namespace+0x1d0/0x260
acpi_get_devices+0x8a/0xb0
pnpacpi_init+0x50/0x80
do_one_initcall+0x46/0x2e0
kernel_init_freeable+0x1da/0x2f0
kernel_init+0x16/0x1b0
ret_from_fork+0x30/0x50
ret_from_fork_asm+0x1b/0x30
based on quirks for a "PNP0c01" device. Treating MMCFG as disabled is the
right course of action, so no change is needed there.
This was most likely exposed by fixing the Xen MSR accessors to not be
silently-safe.
Fixes: 3fac3734c4 ("xen/pv: support selecting safe/unsafe msr accesses")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250307002846.3026685-1-andrew.cooper3@citrix.com
If the warning mode with disabled mitigation mode is used, then on each
CPU where the split lock occurred detection will be disabled in order to
make progress and delayed work will be scheduled, which then will enable
detection back.
Now it turns out that all CPUs use one global delayed work structure.
This leads to the fact that if a split lock occurs on several CPUs
at the same time (within 2 jiffies), only one CPU will schedule delayed
work, but the rest will not.
The return value of schedule_delayed_work_on() would have shown this,
but it is not checked in the code.
A diagram that can help to understand the bug reproduction:
- sld_update_msr() enables/disables SLD on both CPUs on the same core
- schedule_delayed_work_on() internally checks WORK_STRUCT_PENDING_BIT.
If a work has the 'pending' status, then schedule_delayed_work_on()
will return an error code and, most importantly, the work will not
be placed in the workqueue.
Let's say we have a multicore system on which split_lock_mitigate=0 and
a multithreaded application is running that calls splitlock in multiple
threads. Due to the fact that sld_update_msr() affects the entire core
(both CPUs), we will consider 2 CPUs from different cores. Let the 2
threads of this application schedule to CPU0 (core 0) and to CPU 2
(core 1), then:
| || |
| CPU 0 (core 0) || CPU 2 (core 1) |
|_________________________________||___________________________________|
| || |
| 1) SPLIT LOCK occured || |
| || |
| 2) split_lock_warn() || |
| || |
| 3) sysctl_sld_mitigate == 0 || |
| (work = &sl_reenable) || |
| || |
| 4) schedule_delayed_work_on() || |
| (reenable will be called || |
| after 2 jiffies on CPU 0) || |
| || |
| 5) disable SLD for core 0 || |
| || |
| ------------------------- || |
| || |
| || 6) SPLIT LOCK occured |
| || |
| || 7) split_lock_warn() |
| || |
| || 8) sysctl_sld_mitigate == 0 |
| || (work = &sl_reenable, |
| || the same address as in 3) ) |
| || |
| 2 jiffies || 9) schedule_delayed_work_on() |
| || fials because the work is in |
| || the pending state since 4). |
| || The work wasn't placed to the |
| || workqueue. reenable won't be |
| || called on CPU 2 |
| || |
| || 10) disable SLD for core 0 |
| || |
| || From now on SLD will |
| || never be reenabled on core 1 |
| || |
| ------------------------- || |
| || |
| 11) enable SLD for core 0 by || |
| __split_lock_reenable || |
| || |
If the application threads can be scheduled to all processor cores,
then over time there will be only one core left, on which SLD will be
enabled and split lock will be able to be detected; and on all other
cores SLD will be disabled all the time.
Most likely, this bug has not been noticed for so long because
sysctl_sld_mitigate default value is 1, and in this case a semaphore
is used that does not allow 2 different cores to have SLD disabled at
the same time, that is, strictly only one work is placed in the
workqueue.
In order to fix the warning mode with disabled mitigation mode,
delayed work has to be per-CPU. Implement it.
Fixes: 727209376f ("x86/split_lock: Add sysctl to control the misery mode")
Signed-off-by: Maksim Davydov <davydov-max@yandex-team.ru>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20250115131704.132609-1-davydov-max@yandex-team.ru
bts_ctx might not be allocated, for example if the CPU has X86_FEATURE_PTI,
but intel_bts_disable/enable_local() and intel_bts_interrupt() are called
unconditionally from intel_pmu_handle_irq() and crash on bts_ctx.
So check if bts_ctx is allocated when calling BTS functions.
Fixes: 3acfcefa79 ("perf/x86/intel/bts: Allocate bts_ctx only if necessary")
Reported-by: Jiri Olsa <olsajiri@gmail.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Suggested-by: Adrian Hunter <adrian.hunter@intel.com>
Suggested-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250306051102.2642-1-lirongqing@baidu.com
The 5-level paging code parses the command line to look for the 'no5lvl'
string, and does so very early, before sanitize_boot_params() has been
called and has been given the opportunity to wipe bogus data from the
fields in boot_params that are not covered by struct setup_header, and
are therefore supposed to be initialized to zero by the bootloader.
This triggers an early boot crash when using syslinux-efi to boot a
recent kernel built with CONFIG_X86_5LEVEL=y and CONFIG_EFI_STUB=n, as
the 0xff padding that now fills the unused PE/COFF header is copied into
boot_params by the bootloader, and interpreted as the top half of the
command line pointer.
Fix this by sanitizing the boot_params before use. Note that there is no
harm in calling this more than once; subsequent invocations are able to
spot that the boot_params have already been cleaned up.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <stable@vger.kernel.org> # v6.1+
Link: https://lore.kernel.org/r/20250306155915.342465-2-ardb+git@google.com
Closes: https://lore.kernel.org/all/202503041549.35913.ulrich.gemkow@ikr.uni-stuttgart.de
A lot of code optimization to avoid cases where call paths will end up calling
the same writes multiple times and needlessly caching variables. To accomplish
this some of the writes are now made into an atomically written "perf" variable.
Locking has been overhauled to ensure it only applies to the necessary functions.
Tracing has been adjusted to ensure trace events only are used right before
writing out to the hardware.
NOTE: This is a redo of amd-pstate-v6.15-2025-03-03 with a fixed Fixes tag.
-----BEGIN PGP SIGNATURE-----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=VkdW
-----END PGP SIGNATURE-----
Merge tag 'amd-pstate-v6.15-2025-03-06' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux
Merge amd-pstate updates for 6.15 (3/6/25) from Mario Limonciello:
"A lot of code optimization to avoid cases where call paths will end up
calling the same writes multiple times and needlessly caching variables.
To accomplish this some of the writes are now made into an atomically
written "perf" variable. Locking has been overhauled to ensure it only
applies to the necessary functions. Tracing has been adjusted to ensure
trace events only are used right before writing out to the hardware."
NOTE: This is a redo of amd-pstate-v6.15-2025-03-03 with a fixed Fixes tag.
* tag 'amd-pstate-v6.15-2025-03-06' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux: (29 commits)
cpufreq/amd-pstate: Drop actions in amd_pstate_epp_cpu_offline()
cpufreq/amd-pstate: Stop caching EPP
cpufreq/amd-pstate: Rework CPPC enabling
cpufreq/amd-pstate: Drop debug statements for policy setting
cpufreq/amd-pstate: Update cppc_req_cached for shared mem EPP writes
cpufreq/amd-pstate: Move all EPP tracing into *_update_perf and *_set_epp functions
cpufreq/amd-pstate: Cache CPPC request in shared mem case too
cpufreq/amd-pstate: Replace all AMD_CPPC_* macros with masks
cpufreq/amd-pstate-ut: Adjust variable scope
cpufreq/amd-pstate-ut: Run on all of the correct CPUs
cpufreq/amd-pstate-ut: Drop SUCCESS and FAIL enums
cpufreq/amd-pstate-ut: Allow lowest nonlinear and lowest to be the same
cpufreq/amd-pstate-ut: Use _free macro to free put policy
cpufreq/amd-pstate: Drop `cppc_cap1_cached`
cpufreq/amd-pstate: Overhaul locking
cpufreq/amd-pstate: Move perf values into a union
cpufreq/amd-pstate: Drop min and max cached frequencies
cpufreq/amd-pstate: Show a warning when a CPU fails to setup
cpufreq/amd-pstate: Invalidate cppc_req_cached during suspend
cpufreq/amd-pstate: Fix the clamping of perf values
...
Bitfield masks are easier to follow and less error prone.
Reviewed-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Background:
===========
Currently kernel-mode FPU is not always usable in softirq context on
x86, since softirqs can nest inside a kernel-mode FPU section in task
context, and nested use of kernel-mode FPU is not supported.
Therefore, x86 SIMD-optimized code that can be called in softirq context
has to sometimes fall back to non-SIMD code. There are two options for
the fallback, both of which are pretty terrible:
(a) Use a scalar fallback. This can be 10-100x slower than vectorized
code because it cannot use specialized instructions like AES, SHA,
or carryless multiplication.
(b) Execute the request asynchronously using a kworker. In other
words, use the "crypto SIMD helper" in crypto/simd.c.
Currently most of the x86 en/decryption code (skcipher and aead
algorithms) uses option (b), since this avoids the slow scalar fallback
and it is easier to wire up. But option (b) is still really bad for its
own reasons:
- Punting the request to a kworker is bad for performance too.
- It forces the algorithm to be marked as asynchronous
(CRYPTO_ALG_ASYNC), preventing it from being used by crypto API
users who request a synchronous algorithm. That's another huge
performance problem, which is especially unfortunate for users who
don't even do en/decryption in softirq context.
- It makes all en/decryption operations take a detour through
crypto/simd.c. That involves additional checks and an additional
indirect call, which slow down en/decryption for *everyone*.
Fortunately, the skcipher and aead APIs are only usable in task and
softirq context in the first place. Thus, if kernel-mode FPU were to be
reliably usable in softirq context, no fallback would be needed.
Indeed, other architectures such as arm, arm64, and riscv have already
done this.
Changes implemented:
====================
Therefore, this patch updates x86 accordingly to reliably support
kernel-mode FPU in softirqs.
This is done by just disabling softirq processing in kernel-mode FPU
sections (when hardirqs are not already disabled), as that prevents the
nesting that was problematic.
This will delay some softirqs slightly, but only ones that would have
otherwise been nested inside a task context kernel-mode FPU section.
Any such softirqs would have taken the slow fallback path before if they
tried to do any en/decryption. Now these softirqs will just run at the
end of the task context kernel-mode FPU section (since local_bh_enable()
runs pending softirqs) and will no longer take the slow fallback path.
Alternatives considered:
========================
- Make kernel-mode FPU sections fully preemptible. This would require
growing task_struct by another struct fpstate which is more than 2K.
- Make softirqs save/restore the kernel-mode FPU state to a per-CPU
struct fpstate when nested use is detected. Somewhat interesting, but
seems unnecessary when a simpler solution exists.
Performance results:
====================
I did some benchmarks with AES-XTS encryption of 16-byte messages (which is
unrealistically small, but this makes it easier to see the overhead of
kernel-mode FPU...). The baseline was 384 MB/s. Removing the use of
crypto/simd.c, which this work makes possible, increases it to 487 MB/s,
a +27% improvement in throughput.
CPU was AMD Ryzen 9 9950X (Zen 5). No debugging options were enabled.
[ mingo: Prettified the changelog and added performance results. ]
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Link: https://lore.kernel.org/r/20250304204954.3901-1-ebiggers@kernel.org
Jann reported a possible issue when trampoline_check_ip returns
address near the bottom of the address space that is allowed to
call into the syscall if uretprobes are not set up:
https://lore.kernel.org/bpf/202502081235.5A6F352985@keescook/T/#m9d416df341b8fbc11737dacbcd29f0054413cbbf
Though the mmap minimum address restrictions will typically prevent
creating mappings there, let's make sure uretprobe syscall checks
for that.
Fixes: ff474a78ce ("uprobe: Add uretprobe syscall to speed up return probe")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250212220433.3624297-1-jolsa@kernel.org
The following build warning highlights some unused code:
arch/x86/platform/olpc/olpc_dt.c: In function ‘olpc_dt_compatible_match’:
arch/x86/platform/olpc/olpc_dt.c:222:12: warning: variable ‘len’ set but not used [-Wunused-but-set-variable]
The compiler is right, the local variable 'len' is set but never used,
so remove it.
Fixes: a7a9bacb9a ("x86/platform/olpc: Use a correct version when making up a battery node")
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20241025074203.1921344-1-zengheng4@huawei.com
Add the __counted_by() compiler attribute to the flexible array member
buf to improve access bounds-checking via CONFIG_UBSAN_BOUNDS and
CONFIG_FORTIFY_SOURCE.
No functional changes intended.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250305123134.215577-2-thorsten.blum@linux.dev
The total size calculated for EPC can overflow u64 given the added up page
for SECS. Further, the total size calculated for shmem can overflow even
when the EPC size stays within limits of u64, given that it adds the extra
space for 128 byte PCMD structures (one for each page).
Address this by pre-evaluating the micro-architectural requirement of
SGX: the address space size must be power of two. This is eventually
checked up by ECREATE but the pre-check has the additional benefit of
making sure that there is some space for additional data.
Fixes: 888d249117 ("x86/sgx: Add SGX_IOC_ENCLAVE_CREATE")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lore.kernel.org/r/20250305050006.43896-1-jarkko@kernel.org
Closes: https://lore.kernel.org/linux-sgx/c87e01a0-e7dd-4749-a348-0980d3444f04@stanley.mountain/
- Other good cleanups
-----BEGIN PGP SIGNATURE-----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=2mhO
-----END PGP SIGNATURE-----
Merge tag 'x86_microcode_for_v6.14_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull AMD microcode loading fixes from Borislav Petkov:
- Load only sha256-signed microcode patch blobs
- Other good cleanups
* tag 'x86_microcode_for_v6.14_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode/AMD: Load only SHA256-checksummed patches
x86/microcode/AMD: Add get_patch_level()
x86/microcode/AMD: Get rid of the _load_microcode_amd() forward declaration
x86/microcode/AMD: Merge early_apply_microcode() into its single callsite
x86/microcode/AMD: Remove unused save_microcode_in_initrd_amd() declarations
x86/microcode/AMD: Remove ugly linebreak in __verify_patch_section() signature
Make __per_cpu_hot_end marker point to the end of the percpu cache
hot data, not to the end of the percpu cache hot section.
This fixes CONFIG_MPENTIUM4 case where X86_L1_CACHE_SHIFT
is set to 7 (128 bytes).
Also update assert message accordingly.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Link: https://lore.kernel.org/r/20250304173455.89361-1-ubizjak@gmail.com
Closes: https://lore.kernel.org/lkml/Z8a-NVJs-pm5W-mG@gmail.com/
Also change the alignment of the percpu hot section:
- PERCPU_SECTION(INTERNODE_CACHE_BYTES)
+ PERCPU_SECTION(L1_CACHE_BYTES)
As vSMP will muck with INTERNODE_CACHE_BYTES that invalidates the
too-large-section assert we do:
ASSERT(__per_cpu_hot_end - __per_cpu_hot_start <= 64, "percpu cache hot section too large")
[ mingo: Added INTERNODE_CACHE_BYTES fix & explanation. ]
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250303165246.2175811-3-brgerst@gmail.com
The return values of these functions is 0/1, but they use an int
type instead of bool:
check_stack_overflow()
execute_on_irq_stack()
Change the type of these function to bool and adjust their return
values and affected helper variables.
[ mingo: Rewrote the changelog ]
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250303155446.112769-5-ubizjak@gmail.com
Make code more readable by using the 'current_stack_pointer' global variable.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250303155446.112769-4-ubizjak@gmail.com
i386 ABI declares %edx as a call-clobbered register.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250303155446.112769-2-ubizjak@gmail.com
Also use inout "+" constraint modifier where appropriate.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250303155446.112769-1-ubizjak@gmail.com
Remove dead/unreachable (and misguided) code in KVM's processing of
0x80000022. The case statement breaks early if PERFMON_V2 isnt supported,
i.e. kvm_cpu_cap_has(X86_FEATURE_PERFMON_V2) must be true when KVM reaches
the code code to setup EBX.
Note, early versions of the patch that became commit 94cdeebd82 ("KVM:
x86/cpuid: Add AMD CPUID ExtPerfMonAndDbg leaf 0x80000022") didn't break
early on lack of PERFMON_V2 support, and instead enumerated the effective
number of counters KVM could emulate. All of that code was flawed, e.g.
the APM explicitly states EBX is valid only for v2.
Performance Monitoring Version 2 supported. When set,
CPUID_Fn8000_0022_EBX reports the number of available performance counters.
When the flaw of not respecting v2 support was addressed, the misguided
stuffing of the number of counters got left behind.
Link: https://lore.kernel.org/all/20220919093453.71737-4-likexu@tencent.com
Fixes: 94cdeebd82 ("KVM: x86/cpuid: Add AMD CPUID ExtPerfMonAndDbg leaf 0x80000022")
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20250304082314.472202-2-xiaoyao.li@intel.com
[sean: elaborate on the situation a bit more, add Fixes]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Fix a goof where KVM sets CPUID.0x80000022.EAX to CPUID.0x80000022.EBX
instead of zeroing both when PERFMON_V2 isn't supported by KVM. In
practice, barring a buggy CPU (or vCPU model when running nested) only the
!enable_pmu case is affected, as KVM always supports PERFMON_V2 if it's
available in hardware, i.e. CPUID.0x80000022.EBX will be '0' if PERFMON_V2
is unsupported.
For the !enable_pmu case, the bug is relatively benign as KVM will refuse
to enable PMU capabilities, but a VMM that reflects KVM's supported CPUID
into the guest could inadvertently induce #GPs in the guest due to
advertising support for MSRs that KVM refuses to emulate.
Fixes: 94cdeebd82 ("KVM: x86/cpuid: Add AMD CPUID ExtPerfMonAndDbg leaf 0x80000022")
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20250304082314.472202-3-xiaoyao.li@intel.com
[sean: massage shortlog and changelog, tag for stable]
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Separate the input from the clobbers in preparation for appending the
input.
Do this in preparation of changing the ASM_CALL_CONSTRAINT primitive.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
Use named operands in inline asm to make it easier to change the
constraint order.
Do this in preparation of changing the ASM_CALL_CONSTRAINT primitive.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: linux-kernel@vger.kernel.org
Convert the non-asm-goto version of the inline asm in __vmcs_readl() to
use named operands, similar to its asm-goto version.
Do this in preparation of changing the ASM_CALL_CONSTRAINT primitive.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Sean Christopherson <seanjc@google.com>
Cc: linux-kernel@vger.kernel.org
Remove the headers at cacheinfo.c that are no longer required.
Alphabetically reorder what remains since more headers will be included
in further commits.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250304085152.51092-13-darwi@linutronix.de
Commit 851026a2bf ("x86/cacheinfo: Remove unused trace variable") removed
the switch case for LVL_TRACE but did not get rid of the surrounding gunk.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250304085152.51092-12-darwi@linutronix.de
Commit:
e0ba94f14f ("x86/tlb_info: get last level TLB entry number of CPU")
added the TLB table for parsing CPUID(0x4), including strings
describing them. The string entry in the table was never used.
Convert them to comments.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250304085152.51092-10-darwi@linutronix.de
smp_store_cpu_info() is just a wrapper around identify_secondary_cpu()
without further value.
Move the extra bits from smp_store_cpu_info() into identify_secondary_cpu()
and remove the wrapper.
[ darwi: Make it compile and fix up the xen/smp_pv.c instance ]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250304085152.51092-9-darwi@linutronix.de
Commit:
e0ba94f14f ("x86/tlb_info: get last level TLB entry number of CPU")
introduced u16 "info" arrays for each TLB type.
Since 2012 and each array stores just one type of information: the
number of TLB entries for its respective TLB type.
Replace such arrays with simple variables.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250304085152.51092-8-darwi@linutronix.de
The conditional statement "if (x < y) { x = y; }" appears 22 times at
the Intel leaf 0x2 descriptors parsing logic.
Replace each of such instances with a max() expression to simplify
the code.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250304085152.51092-7-darwi@linutronix.de
Remove the headers at intel.c that are no longer required.
Alphabetically reorder what remains since more headers will be included
in further commits.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250304085152.51092-6-darwi@linutronix.de
<asm/cpuid.h> uses static_assert() at multiple locations but it does not
include the CPP macro's definition at linux/build_bug.h.
Include the needed header to make <asm/cpuid.h> self-sufficient.
This gets triggered when cpuid.h is included in new C files, which is to
be done in further commits.
Fixes: 43d86e3cd9 ("x86/cpu: Provide cpuid_read() et al.")
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250304085152.51092-5-darwi@linutronix.de
Since using these options is very dangerous, make details as visible as
possible:
- Instead of a single message for each of the cmdline options, print a
separate pr_warn() for each individual flag.
- Say explicitly whether the flag is a "feature" or a "bug".
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20250303-setcpuid-taint-louder-v1-3-8d255032cb4c@google.com
Commit 814165e9fd ("x86/cpu: Add the 'setcpuid=' boot parameter")
recently expanded the user's ability to break their system horribly by
overriding effective CPU flags. This was reflected with updates to the
documentation to try and make people aware that this is dangerous.
To further reduce the risk of users mistaking this for a "real feature",
and try to help them figure out why their kernel is tainted if they do
use it:
- Upgrade the existing printk to pr_warn, to help ensure kernel logs
reflect what changes are in effect.
- Print an extra warning that tries to be as dramatic as possible, while
also highlighting the fact that it tainted the kernel.
Suggested-by: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20250303-setcpuid-taint-louder-v1-2-8d255032cb4c@google.com
These macros used to abstract over CONFIG_X86_FEATURE_NAMES, but that
was removed in:
7583e8fbdc ("x86/cpu: Remove X86_FEATURE_NAMES")
Now they are just an unnecessary indirection, remove them.
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20250303-setcpuid-taint-louder-v1-1-8d255032cb4c@google.com
Retpoline mitigation for spectre-v2 uses thunks for indirect branches. To
support this mitigation compilers add a CS prefix with
-mindirect-branch-cs-prefix. For an indirect branch in asm, this needs to
be added manually.
CS prefix is already being added to indirect branches in asm files, but not
in inline asm. Add CS prefix to CALL_NOSPEC for inline asm as well. There
is no JMP_NOSPEC for inline asm.
Reported-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250228-call-nospec-v3-2-96599fed0f33@linux.intel.com
CALL_NOSPEC macro is used to generate Spectre-v2 mitigation friendly
indirect branches. At compile time the macro defaults to indirect branch,
and at runtime those can be patched to thunk based mitigations.
This approach is opposite of what is done for the rest of the kernel, where
the compile time default is to replace indirect calls with retpoline thunk
calls.
Make CALL_NOSPEC consistent with the rest of the kernel, default to
retpoline thunk at compile time when CONFIG_MITIGATION_RETPOLINE is
enabled.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250228-call-nospec-v3-1-96599fed0f33@linux.intel.com
Fix some related issues (done in a single patch to avoid introducing
intermediate bisect warnings):
1) The SMP version of mwait_play_dead() doesn't return, but its
!SMP counterpart does. Make its calling behavior consistent by
resolving the !SMP version to a BUG(). It should never be called
anyway, this just enforces that at runtime and enables its callers
to be marked as __noreturn.
2) While the SMP definition of mwait_play_dead() is annotated as
__noreturn, the declaration isn't. Nor is it listed in
tools/objtool/noreturns.h. Fix that.
3) Similar to #1, the SMP version of acpi_processor_ffh_play_dead()
doesn't return but its !SMP counterpart does. Make the !SMP
version a BUG(). It should never be called.
4) acpi_processor_ffh_play_dead() doesn't return, but is lacking any
__noreturn annotations. Fix that.
This fixes the following objtool warnings:
vmlinux.o: warning: objtool: acpi_processor_ffh_play_dead+0x67: mwait_play_dead() is missing a __noreturn annotation
vmlinux.o: warning: objtool: acpi_idle_play_dead+0x3c: acpi_processor_ffh_play_dead() is missing a __noreturn annotation
Fixes: a7dd183f0b ("x86/smp: Allow calling mwait_play_dead with an arbitrary hint")
Fixes: 541ddf31e3 ("ACPI/processor_idle: Add FFH state handling")
Reported-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/e885c6fa9e96a61471b33e48c2162d28b15b14c5.1740962711.git.jpoimboe@kernel.org
Commit f388f60ca9 ("x86/cpu: Drop configuration options for early 64-bit CPUs")
removes the config symbols MCORE2 and MK8.
With that, the references to those two config symbols in xen's x86 Kconfig
are obsolete. Drop them.
Fixes: f388f60ca9 ("x86/cpu: Drop configuration options for early 64-bit CPUs")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20250303093759.371445-1-lukas.bulwahn@redhat.com
CPUID leaf 0x2's one-byte TLB descriptors report the number of entries
for specific TLB types, among other properties.
Typically, each emitted descriptor implies the same number of entries
for its respective TLB type(s). An emitted 0x63 descriptor is an
exception: it implies 4 data TLB entries for 1GB pages and 32 data TLB
entries for 2MB or 4MB pages.
For the TLB descriptors parsing code, the entry count for 1GB pages is
encoded at the intel_tlb_table[] mapping, but the 2MB/4MB entry count is
totally ignored.
Update leaf 0x2's parsing logic 0x2 to account for 32 data TLB entries
for 2MB/4MB pages implied by the 0x63 descriptor.
Fixes: e0ba94f14f ("x86/tlb_info: get last level TLB entry number of CPU")
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250304085152.51092-4-darwi@linutronix.de
CPUID leaf 0x2 emits one-byte descriptors in its four output registers
EAX, EBX, ECX, and EDX. For these descriptors to be valid, the most
significant bit (MSB) of each register must be clear.
Leaf 0x2 parsing at intel.c only validated the MSBs of EAX, EBX, and
ECX, but left EDX unchecked.
Validate EDX's most-significant bit as well.
Fixes: e0ba94f14f ("x86/tlb_info: get last level TLB entry number of CPU")
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250304085152.51092-3-darwi@linutronix.de
CPUID leaf 0x2 emits one-byte descriptors in its four output registers
EAX, EBX, ECX, and EDX. For these descriptors to be valid, the most
significant bit (MSB) of each register must be clear.
The historical Git commit:
019361a20f016 ("- pre6: Intel: start to add Pentium IV specific stuff (128-byte cacheline etc)...")
introduced leaf 0x2 output parsing. It only validated the MSBs of EAX,
EBX, and ECX, but left EDX unchecked.
Validate EDX's most-significant bit.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250304085152.51092-2-darwi@linutronix.de
The safe_smp_processor_id() function was originally implemented in:
dc2bc768a0 ("stack overflow safe kdump: safe_smp_processor_id()")
to mitigate the CPU number corruption on a stack overflow. At the time,
x86-32 stored the CPU number in thread_struct, which was located at the
bottom of the task stack and thus vulnerable to an overflow.
The CPU number is now located in percpu memory, so this workaround
is no longer needed.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Uros Bizjak <ubizjak@gmail.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lore.kernel.org/r/20250303170115.2176553-1-brgerst@gmail.com
Commit:
263042e463 ("Save user RSP in pt_regs->sp on SYSCALL64 fastpath")
simplified the 64-bit implementation of KSTK_ESP() which is
now identical to 32-bit. Merge them into a common definition.
No functional change.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250303183111.2245129-1-brgerst@gmail.com
Extract the checking of entry/exit pairs to a helper macro so that the
code can be reused to process the upcoming "secondary" exit controls (the
primary exit controls field is out of bits). Use a macro instead of a
function to support different sized variables (all secondary exit controls
will be optional and so the MSR doesn't have the fixed-0/fixed-1 split).
Taking the largest size as input is trivial, but handling the modification
of KVM's to-be-used controls is much trickier, e.g. would require bitmap
games to clear bits from a 32-bit bitmap vs. a 64-bit bitmap.
Opportunistically add sanity checks to ensure the size of the controls
match (yay, macro!), e.g. to detect bugs where KVM passes in the pairs for
primary exit controls, but its variable for the secondary exit controls.
To help users triage mismatches, print the control bits that are checked,
not just the actual value. For the foreseeable future, that provides
enough information for a user to determine which fields mismatched. E.g.
until secondary entry controls comes along, all entry bits and thus all
error messages are guaranteed to be unique.
To avoid returning from a macro, which can get quite dangerous, simply
process all pairs even if error_on_inconsistent_vmcs_config is set. The
speed at which KVM rejects module load is not at all interesting.
Keep the error message a "once" printk, even though it would be nice to
print out all mismatching pairs. In practice, the most likely scenario is
that a single pair will mismatch on all CPUs. Printing all mismatches
generates redundant messages in that situation, and can be extremely noisy
on systems with large numbers of CPUs. If a CPU has multiple mismatches,
not printing every bad pair is the least of the user's concerns.
Cc: Xin Li (Intel) <xin@zytor.com>
Link: https://lore.kernel.org/r/20250227005353.3216123-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
When processing an SNP AP Creation event, invalidate the "next" VMSA GPA
even if acquiring the page/pfn for the new VMSA fails. In practice, the
next GPA will never be used regardless of whether or not its invalidated,
as the entire flow is guarded by snp_ap_waiting_for_reset, and said guard
and snp_vmsa_gpa are always written as a pair. But that's really hard to
see in the code.
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20250227012541.3234589-11-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use guard(mutex) in sev_snp_init_protected_guest_state() and pull in its
lock-protected inner helper. Without an unlock trampoline (and even with
one), there is no real need for an inner helper. Eliminating the helper
also avoids having to fixup the open coded "lockdep" WARN_ON().
Opportunistically drop the error message if KVM can't obtain the pfn for
the new target VMSA. The error message provides zero information that
can't be gleaned from the fact that the vCPU is stuck.
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20250227012541.3234589-10-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Mark the VMCB dirty, i.e. zero control.clean, prior to handling the new
VMSA. Nothing in the VALID_PAGE() case touches control.clean, and
isolating the VALID_PAGE() code will allow simplifying the overall logic.
Note, the VMCB probably doesn't need to be marked dirty when the VMSA is
invalid, as KVM will disallow running the vCPU in such a state. But it
also doesn't hurt anything.
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20250227012541.3234589-9-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use guard(mutex) in sev_snp_ap_creation() and modify the error paths to
return directly instead of jumping to a common exit point.
No functional change intended.
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Link: https://lore.kernel.org/r/20250227012541.3234589-8-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Drop the local "kick" variable and the unnecessary "fallthrough" logic
from sev_snp_ap_creation(), and simply pivot on the request when deciding
whether or not to immediate force a state update on the target vCPU.
No functional change intended.
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20250227012541.3234589-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
When handling an "AP Create" event, return an error if the "requested" SEV
features for the vCPU don't exactly match KVM's view of the VM-scoped
features. There is no known use case for heterogeneous SEV features across
vCPUs, and while KVM can't actually enforce an exact match since the value
in RAX isn't guaranteed to match what the guest shoved into the VMSA, KVM
can at least avoid knowingly letting the guest run in an unsupported state.
E.g. if a VM is created with DebugSwap disabled, KVM will intercept #DBs
and DRs for all vCPUs, even if an AP is "created" with DebugSwap enabled in
its VMSA.
Note, the GHCB spec only "requires" that "AP use the same interrupt
injection mechanism as the BSP", but given the disaster that is DebugSwap
and SEV_FEATURES in general, it's safe to say that AMD didn't consider all
possible complications with mismatching features between the BSP and APs.
Opportunistically fold the check into the relevant request flavors; the
"request < AP_DESTROY" check is just a bizarre way of implementing the
AP_CREATE_ON_INIT => AP_CREATE fallthrough.
Fixes: e366f92ea9 ("KVM: SEV: Support SEV-SNP AP Creation NAE event")
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Link: https://lore.kernel.org/r/20250227012541.3234589-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
If KVM rejects an AP Creation event, leave the target vCPU state as-is.
Nothing in the GHCB suggests the hypervisor is *allowed* to muck with vCPU
state on failure, let alone required to do so. Furthermore, kicking only
in the !ON_INIT case leads to divergent behavior, and even the "kick" case
is non-deterministic.
E.g. if an ON_INIT request fails, the guest can successfully retry if the
fixed AP Creation request is made prior to sending INIT. And if a !ON_INIT
fails, the guest can successfully retry if the fixed AP Creation request is
handled before the target vCPU processes KVM's
KVM_REQ_UPDATE_PROTECTED_GUEST_STATE.
Fixes: e366f92ea9 ("KVM: SEV: Support SEV-SNP AP Creation NAE event")
Cc: stable@vger.kernel.org
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Link: https://lore.kernel.org/r/20250227012541.3234589-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Explicitly reject KVM_RUN with KVM_EXIT_FAIL_ENTRY if userspace "coerces"
KVM into running an SEV-ES+ guest with an invalid VMSA, e.g. by modifying
a vCPU's mp_state to be RUNNABLE after an SNP vCPU has undergone a Destroy
event. On Destroy or failed Create, KVM marks the vCPU HALTED so that
*KVM* doesn't run the vCPU, but nothing prevents a misbehaving VMM from
manually making the vCPU RUNNABLE via KVM_SET_MP_STATE.
Attempting VMRUN with an invalid VMSA should be harmless, but knowingly
executing VMRUN with bad control state is at best dodgy.
Fixes: e366f92ea9 ("KVM: SEV: Support SEV-SNP AP Creation NAE event")
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Link: https://lore.kernel.org/r/20250227012541.3234589-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Never rely on the CPU to restore/load host DR0..DR3 values, even if the
CPU supports DebugSwap, as there are no guarantees that SNP guests will
actually enable DebugSwap on APs. E.g. if KVM were to rely on the CPU to
load DR0..DR3 and skipped them during hw_breakpoint_restore(), KVM would
run with clobbered-to-zero DRs if an SNP guest created APs without
DebugSwap enabled.
Update the comment to explain the dangers, and hopefully prevent breaking
KVM in the future.
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20250227012541.3234589-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
When running SEV-SNP guests on a CPU that supports DebugSwap, always save
the host's DR0..DR3 mask MSR values irrespective of whether or not
DebugSwap is enabled, to ensure the host values aren't clobbered by the
CPU. And for now, also save DR0..DR3, even though doing so isn't
necessary (see below).
SVM_VMGEXIT_AP_CREATE is deeply flawed in that it allows the *guest* to
create a VMSA with guest-controlled SEV_FEATURES. A well behaved guest
can inform the hypervisor, i.e. KVM, of its "requested" features, but on
CPUs without ALLOWED_SEV_FEATURES support, nothing prevents the guest from
lying about which SEV features are being enabled (or not!).
If a misbehaving guest enables DebugSwap in a secondary vCPU's VMSA, the
CPU will load the DR0..DR3 mask MSRs on #VMEXIT, i.e. will clobber the
MSRs with '0' if KVM doesn't save its desired value.
Note, DR0..DR3 themselves are "ok", as DR7 is reset on #VMEXIT, and KVM
restores all DRs in common x86 code as needed via hw_breakpoint_restore().
I.e. there is no risk of host DR0..DR3 being clobbered (when it matters).
However, there is a flaw in the opposite direction; because the guest can
lie about enabling DebugSwap, i.e. can *disable* DebugSwap without KVM's
knowledge, KVM must not rely on the CPU to restore DRs. Defer fixing
that wart, as it's more of a documentation issue than a bug in the code.
Note, KVM added support for DebugSwap on commit d1f85fbe83 ("KVM: SEV:
Enable data breakpoints in SEV-ES"), but that is not an appropriate Fixes,
as the underlying flaw exists in hardware, not in KVM. I.e. all kernels
that support SEV-SNP need to be patched, not just kernels with KVM's full
support for DebugSwap (ignoring that DebugSwap support landed first).
Opportunistically fix an incorrect statement in the comment; on CPUs
without DebugSwap, the CPU does NOT save or load debug registers, i.e.
Fixes: e366f92ea9 ("KVM: SEV: Support SEV-SNP AP Creation NAE event")
Cc: stable@vger.kernel.org
Cc: Naveen N Rao <naveen@kernel.org>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Alexey Kardashevskiy <aik@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20250227012541.3234589-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Change the default value of spectre v2 in user mode to respect the
CONFIG_MITIGATION_SPECTRE_V2 config option.
Currently, user mode spectre v2 is set to auto
(SPECTRE_V2_USER_CMD_AUTO) by default, even if
CONFIG_MITIGATION_SPECTRE_V2 is disabled.
Set the spectre_v2 value to auto (SPECTRE_V2_USER_CMD_AUTO) if the
Spectre v2 config (CONFIG_MITIGATION_SPECTRE_V2) is enabled, otherwise
set the value to none (SPECTRE_V2_USER_CMD_NONE).
Important to say the command line argument "spectre_v2_user" overwrites
the default value in both cases.
When CONFIG_MITIGATION_SPECTRE_V2 is not set, users have the flexibility
to opt-in for specific mitigations independently. In this scenario,
setting spectre_v2= will not enable spectre_v2_user=, and command line
options spectre_v2_user and spectre_v2 are independent when
CONFIG_MITIGATION_SPECTRE_V2=n.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: David Kaplan <David.Kaplan@amd.com>
Link: https://lore.kernel.org/r/20241031-x86_bugs_last_v2-v2-2-b7ff1dab840e@debian.org
There is a helper function to check if SMT is available. Use this helper
instead of performing the check manually.
The helper function cpu_smt_possible() does exactly the same thing as
was being done manually inside spectre_v2_user_select_mitigation().
Specifically, it returns false if CONFIG_SMP is disabled, otherwise
it checks the cpu_smt_control global variable.
This change improves code consistency and reduces duplication.
No change in functionality intended.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Cc: David Kaplan <David.Kaplan@amd.com>
Link: https://lore.kernel.org/r/20241031-x86_bugs_last_v2-v2-1-b7ff1dab840e@debian.org
Retpoline mitigation for spectre-v2 uses thunks for indirect branches. To
support this mitigation compilers add a CS prefix with
-mindirect-branch-cs-prefix. For an indirect branch in asm, this needs to
be added manually.
CS prefix is already being added to indirect branches in asm files, but not
in inline asm. Add CS prefix to CALL_NOSPEC for inline asm as well. There
is no JMP_NOSPEC for inline asm.
Reported-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250228-call-nospec-v3-2-96599fed0f33@linux.intel.com
CALL_NOSPEC macro is used to generate Spectre-v2 mitigation friendly
indirect branches. At compile time the macro defaults to indirect branch,
and at runtime those can be patched to thunk based mitigations.
This approach is opposite of what is done for the rest of the kernel, where
the compile time default is to replace indirect calls with retpoline thunk
calls.
Make CALL_NOSPEC consistent with the rest of the kernel, default to
retpoline thunk at compile time when CONFIG_MITIGATION_RETPOLINE is
enabled.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250228-call-nospec-v3-1-96599fed0f33@linux.intel.com
The last use of paravirt_disable_iospace() was removed in 2015 by
commit d1c29465b8 ("lguest: don't disable iospace.")
Remove it.
Note the comment above it about 'entry.S' is unrelated to this
but stayed when intervening code got deleted.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20250303004441.250451-1-linux@treblig.org
The ARCH_MAY_HAVE patch missed arm64, mips and s390. But it may
also lead to arch options being enabled but ineffective because
of modular/built-in conflicts.
As the primary user of all these options wireguard is selecting
the arch options anyway, make the same selections at the lib/crypto
option level and hide the arch options from the user.
Instead of selecting them centrally from lib/crypto, simply set
the default of each arch option as suggested by Eric Biggers.
Change the Crypto API generic algorithms to select the top-level
lib/crypto options instead of the generic one as otherwise there
is no way to enable the arch options (Eric Biggers). Introduce a
set of INTERNAL options to work around dependency cycles on the
CONFIG_CRYPTO symbol.
Fixes: 1047e21aec ("crypto: lib/Kconfig - Fix lib built-in failure when arch is modular")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Arnd Bergmann <arnd@kernel.org>
Closes: https://lore.kernel.org/oe-kbuild-all/202502232152.JC84YDLp-lkp@intel.com/
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In crypto_aegis128_aesni_process_ad(), use scatterwalk_next() which
consolidates scatterwalk_clamp() and scatterwalk_map(). Use
scatterwalk_done_src() which consolidates scatterwalk_unmap(),
scatterwalk_advance(), and scatterwalk_done().
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In gcm_process_assoc(), use scatterwalk_next() which consolidates
scatterwalk_clamp() and scatterwalk_map(). Use scatterwalk_done_src()
which consolidates scatterwalk_unmap(), scatterwalk_advance(), and
scatterwalk_done().
Also rename some variables to avoid implying that anything is actually
mapped (it's not), or that the loop is going page by page (it is for
now, but nothing actually requires that to be the case).
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* Fix TCR_EL2 configuration to not use the ASID in TTBR1_EL2
and not mess-up T1SZ/PS by using the HCR_EL2.E2H==0 layout.
* Bring back the VMID allocation to the vcpu_load phase, ensuring
that we only setup VTTBR_EL2 once on VHE. This cures an ugly
race that would lead to running with an unallocated VMID.
RISC-V:
* Fix hart status check in SBI HSM extension
* Fix hart suspend_type usage in SBI HSM extension
* Fix error returned by SBI IPI and TIME extensions for
unsupported function IDs
* Fix suspend_type usage in SBI SUSP extension
* Remove unnecessary vcpu kick after injecting interrupt
via IMSIC guest file
x86:
* Fix an nVMX bug where KVM fails to detect that, after nested
VM-Exit, L1 has a pending IRQ (or NMI).
* To avoid freeing the PIC while vCPUs are still around, which
would cause a NULL pointer access with the previous patch,
destroy vCPUs before any VM-level destruction.
* Handle failures to create vhost_tasks
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmfCvVsUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPqGwf9FOWQRd/yCKHiufjPDefD1Og0DmgB
Dgk0nmHxaxbyPw+5vYlhn/J3vZ54sNngBpmUekE5OuBMZ9EsxXAK/myByHkzNnV9
cyLm4vYwpb9OQmbQ5MMdDlptYsjV40EmSfwwIJpBxjdkwAI3f7NgeHvG8EwkJgch
C+X4JMrLu2+BGo7BUhuE/xrB8h0CBRnhalB5aK1wuF+ey8v06zcU0zdQCRLUpOsx
mW9S0OpSpSlecvcblr0AhuajjHjwFaTFOQofaXaQFBW6kv3dXmSq/JRABEfx0TBb
MTUDQtnnaYvPy/RWwZIzBpgfASLQNQNxSJ7DIw9C8IG7k6rK25BSRwTmSw==
=afMB
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix TCR_EL2 configuration to not use the ASID in TTBR1_EL2 and not
mess-up T1SZ/PS by using the HCR_EL2.E2H==0 layout.
- Bring back the VMID allocation to the vcpu_load phase, ensuring
that we only setup VTTBR_EL2 once on VHE. This cures an ugly race
that would lead to running with an unallocated VMID.
RISC-V:
- Fix hart status check in SBI HSM extension
- Fix hart suspend_type usage in SBI HSM extension
- Fix error returned by SBI IPI and TIME extensions for unsupported
function IDs
- Fix suspend_type usage in SBI SUSP extension
- Remove unnecessary vcpu kick after injecting interrupt via IMSIC
guest file
x86:
- Fix an nVMX bug where KVM fails to detect that, after nested
VM-Exit, L1 has a pending IRQ (or NMI).
- To avoid freeing the PIC while vCPUs are still around, which would
cause a NULL pointer access with the previous patch, destroy vCPUs
before any VM-level destruction.
- Handle failures to create vhost_tasks"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm: retry nx_huge_page_recovery_thread creation
vhost: return task creation error instead of NULL
KVM: nVMX: Process events on nested VM-Exit if injectable IRQ or NMI is pending
KVM: x86: Free vCPUs before freeing VM state
riscv: KVM: Remove unnecessary vcpu kick
KVM: arm64: Ensure a VMID is allocated before programming VTTBR_EL2
KVM: arm64: Fix tcr_el2 initialisation in hVHE mode
riscv: KVM: Fix SBI sleep_type use
riscv: KVM: Fix SBI TIME error generation
riscv: KVM: Fix SBI IPI error generation
riscv: KVM: Fix hart suspend_type use
riscv: KVM: Fix hart suspend status check
A VMM may send a non-fatal signal to its threads, including vCPU tasks,
at any time, and thus may signal vCPU tasks during KVM_RUN. If a vCPU
task receives the signal while its trying to spawn the huge page recovery
vhost task, then KVM_RUN will fail due to copy_process() returning
-ERESTARTNOINTR.
Rework call_once() to mark the call complete if and only if the called
function succeeds, and plumb the function's true error code back to the
call_once() invoker. This provides userspace with the correct, non-fatal
error code so that the VMM doesn't terminate the VM on -ENOMEM, and allows
subsequent KVM_RUN a succeed by virtue of retrying creation of the NX huge
page task.
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
[implemented the kvm user side]
Signed-off-by: Keith Busch <kbusch@kernel.org>
Message-ID: <20250227230631.303431-3-kbusch@meta.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Lets callers distinguish why the vhost task creation failed. No one
currently cares why it failed, so no real runtime change from this
patch, but that will not be the case for long.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Message-ID: <20250227230631.303431-2-kbusch@meta.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Fix conflicts between devicetree and ACPI SMP discovery & setup
- Fix a warm-boot lockup on AMD SC1100 SoC systems
- Fix a W=1 build warning related to x86 IRQ trace event setup
- Fix a kernel-doc warning
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ueF7
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2025-02-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
- Fix conflicts between devicetree and ACPI SMP discovery & setup
- Fix a warm-boot lockup on AMD SC1100 SoC systems
- Fix a W=1 build warning related to x86 IRQ trace event setup
- Fix a kernel-doc warning
* tag 'x86-urgent-2025-02-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/entry: Fix kernel-doc warning
x86/irq: Define trace events conditionally
x86/CPU: Fix warm boot hang regression on AMD SC1100 SoC systems
x86/of: Don't use DTB for SMP setup if ACPI is enabled
When emulating HLT and a wake event is already pending, explicitly mark
the vCPU RUNNABLE (via kvm_set_mp_state()) instead of assuming the vCPU is
already in the appropriate state. Barring a KVM bug, it should be
impossible for the vCPU to be in a non-RUNNABLE state, but there is no
advantage to relying on that to hold true, and ensuring the vCPU is made
RUNNABLE avoids non-deterministic behavior with respect to pv_unhalted.
E.g. if the vCPU is not already RUNNABLE, then depending on when
pv_unhalted is set, KVM could either leave the vCPU in the non-RUNNABLE
state (set before __kvm_emulate_halt()), or transition the vCPU to HALTED
and then RUNNABLE (pv_unhalted set after the kvm_vcpu_has_events() check).
Link: https://lore.kernel.org/r/20250224174156.2362059-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
In preparation for strtomem*() checking that its destination is a
nonstring, rename and annotate message.bytes accordingly.
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Kees Cook <kees@kernel.org>
Snapshot the host's DEBUGCTL after disabling IRQs, as perf can toggle
debugctl bits from IRQ context, e.g. when enabling/disabling events via
smp_call_function_single(). Taking the snapshot (long) before IRQs are
disabled could result in KVM effectively clobbering DEBUGCTL due to using
a stale snapshot.
Cc: stable@vger.kernel.org
Reviewed-and-tested-by: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20250227222411.3490595-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Manually load the guest's DEBUGCTL prior to VMRUN (and restore the host's
value on #VMEXIT) if it diverges from the host's value and LBR
virtualization is disabled, as hardware only context switches DEBUGCTL if
LBR virtualization is fully enabled. Running the guest with the host's
value has likely been mildly problematic for quite some time, e.g. it will
result in undesirable behavior if BTF diverges (with the caveat that KVM
now suppresses guest BTF due to lack of support).
But the bug became fatal with the introduction of Bus Lock Trap ("Detect"
in kernel paralance) support for AMD (commit 408eb7417a
("x86/bus_lock: Add support for AMD")), as a bus lock in the guest will
trigger an unexpected #DB.
Note, suppressing the bus lock #DB, i.e. simply resuming the guest without
injecting a #DB, is not an option. It wouldn't address the general issue
with DEBUGCTL, e.g. for things like BTF, and there are other guest-visible
side effects if BusLockTrap is left enabled.
If BusLockTrap is disabled, then DR6.BLD is reserved-to-1; any attempts to
clear it by software are ignored. But if BusLockTrap is enabled, software
can clear DR6.BLD:
Software enables bus lock trap by setting DebugCtl MSR[BLCKDB] (bit 2)
to 1. When bus lock trap is enabled, ... The processor indicates that
this #DB was caused by a bus lock by clearing DR6[BLD] (bit 11). DR6[11]
previously had been defined to be always 1.
and clearing DR6.BLD is "sticky" in that it's not set (i.e. lowered) by
other #DBs:
All other #DB exceptions leave DR6[BLD] unmodified
E.g. leaving BusLockTrap enable can confuse a legacy guest that writes '0'
to reset DR6.
Reported-by: rangemachine@gmail.com
Reported-by: whanos@sergal.fun
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219787
Closes: https://lore.kernel.org/all/bug-219787-28872@https.bugzilla.kernel.org%2F
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: stable@vger.kernel.org
Reviewed-and-tested-by: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20250227222411.3490595-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Move KVM's snapshot of DEBUGCTL to kvm_vcpu_arch and take the snapshot in
common x86, so that SVM can also use the snapshot.
Opportunistically change the field to a u64. While bits 63:32 are reserved
on AMD, not mentioned at all in Intel's SDM, and managed as an "unsigned
long" by the kernel, DEBUGCTL is an MSR and therefore a 64-bit value.
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Cc: stable@vger.kernel.org
Reviewed-and-tested-by: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20250227222411.3490595-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Mark BTF as reserved in DEBUGCTL on AMD, as KVM doesn't actually support
BTF, and fully enabling BTF virtualization is non-trivial due to
interactions with the emulator, guest_debug, #DB interception, nested SVM,
etc.
Don't inject #GP if the guest attempts to set BTF, as there's no way to
communicate lack of support to the guest, and instead suppress the flag
and treat the WRMSR as (partially) unsupported.
In short, make KVM behave the same on AMD and Intel (VMX already squashes
BTF).
Note, due to other bugs in KVM's handling of DEBUGCTL, the only way BTF
has "worked" in any capacity is if the guest simultaneously enables LBRs.
Reported-by: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: stable@vger.kernel.org
Reviewed-and-tested-by: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20250227222411.3490595-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Drop bits 5:2 from the guest's effective DEBUGCTL value, as AMD changed
the architectural behavior of the bits and broke backwards compatibility.
On CPUs without BusLockTrap (or at least, in APMs from before ~2023),
bits 5:2 controlled the behavior of external pins:
Performance-Monitoring/Breakpoint Pin-Control (PBi)—Bits 5:2, read/write.
Software uses thesebits to control the type of information reported by
the four external performance-monitoring/breakpoint pins on the
processor. When a PBi bit is cleared to 0, the corresponding external pin
(BPi) reports performance-monitor information. When a PBi bit is set to
1, the corresponding external pin (BPi) reports breakpoint information.
With the introduction of BusLockTrap, presumably to be compatible with
Intel CPUs, AMD redefined bit 2 to be BLCKDB:
Bus Lock #DB Trap (BLCKDB)—Bit 2, read/write. Software sets this bit to
enable generation of a #DB trap following successful execution of a bus
lock when CPL is > 0.
and redefined bits 5:3 (and bit 6) as "6:3 Reserved MBZ".
Ideally, KVM would treat bits 5:2 as reserved. Defer that change to a
feature cleanup to avoid breaking existing guest in LTS kernels. For now,
drop the bits to retain backwards compatibility (of a sort).
Note, dropping bits 5:2 is still a guest-visible change, e.g. if the guest
is enabling LBRs *and* the legacy PBi bits, then the state of the PBi bits
is visible to the guest, whereas now the guest will always see '0'.
Reported-by: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: stable@vger.kernel.org
Reviewed-and-tested-by: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20250227222411.3490595-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Inject a #GP if the memory operand received by INVCPID is non-canonical.
The APM clearly states that the intercept takes priority over all #GP
checks except the CPL0 restriction.
Of course, that begs the question of how the CPU generates a linear
address in the first place. Tracing confirms that EXITINFO1 does hold a
linear address, at least for 64-bit mode guests (hooray GS prefix).
Unfortunately, the APM says absolutely nothing about the EXITINFO fields
for INVPCID intercepts, so it's not at all clear what's supposed to
happen.
Add a FIXME to call out that KVM still does the wrong thing for 32-bit
guests, and if the stack segment is used for the memory operand.
Cc: Babu Moger <babu.moger@amd.com>
Cc: Jim Mattson <jmattson@google.com>
Fixes: 4407a797e9 ("KVM: SVM: Enable INVPCID feature on AMD")
Link: https://lore.kernel.org/r/20250224174522.2363400-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Extend KVM's restrictions on userspace forcing "emulation required" at odd
times to cover stuffing invalid guest state while a nested run is pending.
Clobbering guest state while KVM is in the middle of emulating VM-Enter is
nonsensical, as it puts the vCPU into an architecturally impossible state,
and will trip KVM's sanity check that guards against KVM bugs, e.g. helps
detect missed VMX consistency checks.
WARNING: CPU: 3 PID: 6336 at arch/x86/kvm/vmx/vmx.c:6480 __vmx_handle_exit arch/x86/kvm/vmx/vmx.c:6480 [inline]
WARNING: CPU: 3 PID: 6336 at arch/x86/kvm/vmx/vmx.c:6480 vmx_handle_exit+0x40f/0x1f70 arch/x86/kvm/vmx/vmx.c:6637
Modules linked in:
CPU: 3 UID: 0 PID: 6336 Comm: syz.0.73 Not tainted 6.13.0-rc1-syzkaller-00316-gb5f217084ab3 #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:__vmx_handle_exit arch/x86/kvm/vmx/vmx.c:6480 [inline]
RIP: 0010:vmx_handle_exit+0x40f/0x1f70 arch/x86/kvm/vmx/vmx.c:6637
<TASK>
vcpu_enter_guest arch/x86/kvm/x86.c:11081 [inline]
vcpu_run+0x3047/0x4f50 arch/x86/kvm/x86.c:11242
kvm_arch_vcpu_ioctl_run+0x44a/0x1740 arch/x86/kvm/x86.c:11560
kvm_vcpu_ioctl+0x6ce/0x1520 virt/kvm/kvm_main.c:4340
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:906 [inline]
__se_sys_ioctl fs/ioctl.c:892 [inline]
__x64_sys_ioctl+0x190/0x200 fs/ioctl.c:892
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Reported-by: syzbot+ac0bc3a70282b4d586cc@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/67598fb9.050a0220.17f54a.003b.GAE@google.com
Debugged-by: James Houghton <jthoughton@google.com>
Tested-by: James Houghton <jthoughton@google.com>
Link: https://lore.kernel.org/r/20250224171409.2348647-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Enable/disable local IRQs, i.e. set/clear RFLAGS.IF, in the common
svm_vcpu_enter_exit() just after/before guest_state_{enter,exit}_irqoff()
so that VMRUN is not executed in an STI shadow. AMD CPUs have a quirk
(some would say "bug"), where the STI shadow bleeds into the guest's
intr_state field if a #VMEXIT occurs during injection of an event, i.e. if
the VMRUN doesn't complete before the subsequent #VMEXIT.
The spurious "interrupts masked" state is relatively benign, as it only
occurs during event injection and is transient. Because KVM is already
injecting an event, the guest can't be in HLT, and if KVM is querying IRQ
blocking for injection, then KVM would need to force an immediate exit
anyways since injecting multiple events is impossible.
However, because KVM copies int_state verbatim from vmcb02 to vmcb12, the
spurious STI shadow is visible to L1 when running a nested VM, which can
trip sanity checks, e.g. in VMware's VMM.
Hoist the STI+CLI all the way to C code, as the aforementioned calls to
guest_state_{enter,exit}_irqoff() already inform lockdep that IRQs are
enabled/disabled, and taking a fault on VMRUN with RFLAGS.IF=1 is already
possible. I.e. if there's kernel code that is confused by running with
RFLAGS.IF=1, then it's already a problem. In practice, since GIF=0 also
blocks NMIs, the only change in exposure to non-KVM code (relative to
surrounding VMRUN with STI+CLI) is exception handling code, and except for
the kvm_rebooting=1 case, all exception in the core VM-Enter/VM-Exit path
are fatal.
Use the "raw" variants to enable/disable IRQs to avoid tracing in the
"no instrumentation" code; the guest state helpers also take care of
tracing IRQ state.
Oppurtunstically document why KVM needs to do STI in the first place.
Reported-by: Doug Covelli <doug.covelli@broadcom.com>
Closes: https://lore.kernel.org/all/CADH9ctBs1YPmE4aCfGPNBwA10cA8RuAk2gO7542DjMZgs4uzJQ@mail.gmail.com
Fixes: f14eec0a32 ("KVM: SVM: move more vmentry code to assembly")
Cc: stable@vger.kernel.org
Reviewed-by: Jim Mattson <jmattson@google.com>
Link: https://lore.kernel.org/r/20250224165442.2338294-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
That macro acts as a different name for for_each_tdp_pte, apart from
adding cognitive load it doesn't bring any value. Let's remove it.
Signed-off-by: Nikolay Borisov <nik.borisov@suse.com>
Link: https://lore.kernel.org/r/20250226074131.312565-1-nik.borisov@suse.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Define independent macros for the RWX protection bits that are enumerated
via EXIT_QUALIFICATION for EPT Violations, and tie them to the RWX bits in
EPT entries via compile-time asserts. Piggybacking the EPTE defines works
for now, but it creates holes in the EPT_VIOLATION_xxx macros and will
cause headaches if/when KVM emulates Mode-Based Execution (MBEC), or any
other features that introduces additional protection information.
Opportunistically rename EPT_VIOLATION_RWX_MASK to EPT_VIOLATION_PROT_MASK
so that it doesn't become stale if/when MBEC support is added.
No functional change intended.
Cc: Jon Kohler <jon@nutanix.com>
Cc: Nikolay Borisov <nik.borisov@suse.com>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Link: https://lore.kernel.org/r/20250227000705.3199706-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Those defines are only used in the definition of the various
EPT_VIOLATIONS_ACC_* macros which are then used to extract respective
bits from vmexit error qualifications. Remove the _BIT defines and
redefine the _ACC ones via BIT() macro. No functional changes.
Signed-off-by: Nikolay Borisov <nik.borisov@suse.com>
Link: https://lore.kernel.org/r/20250227000705.3199706-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Commit:
03b122da74 ("x86/sgx: Hook arch_memory_failure() into mainline code")
... added <linux/mm.h> to <asm/set_memory.h> to provide some helpers.
However the following commit:
b3fdf9398a ("x86/mce: relocate set{clear}_mce_nospec() functions")
... moved the inline definitions someplace else, and now <asm/set_memory.h>
just declares a bunch of mostly self-contained functions.
No need for the whole <linux/mm.h> inclusion to declare functions; just
remove that include. This helps avoid circular dependency headaches
(e.g. if <linux/mm.h> ends up including <linux/set_memory.h>).
This change requires a couple of include fixups not to break the
build:
* <asm/smp.h>: including <asm/thread_info.h> directly relies on
<linux/thread_info.h> having already been included, because the
former needs the BAD_STACK/NOT_STACK constants defined in the
latter. This is no longer the case when <asm/smp.h> is included from
some driver file - just include <linux/thread_info.h> to stay out
of trouble.
* sev-guest.c relies on <asm/set_memory.h> including <linux/mm.h>,
so we just need to make that include explicit.
[ mingo: Cleaned up the changelog ]
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20241212080904.2089632-3-kevin.brodsky@arm.com
__set_memory_prot() is unused since:
5c11f00b09 ("x86: remove memory hotplug support on X86_32")
Let's remove it.
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20241212080904.2089632-2-kevin.brodsky@arm.com
Add AUTO mitigations for mds/taa/mmio/rfds to create consistent vulnerability
handling. These AUTO mitigations will be turned into the appropriate default
mitigations in the <vuln>_select_mitigation() functions. Later, these will be
used with the new attack vector controls to help select appropriate
mitigations.
Signed-off-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20250108202515.385902-4-david.kaplan@amd.com
Move the mds, taa, mmio, and rfds mitigation enums earlier in the file to
prepare for restructuring of these mitigations as they are all inter-related.
No functional change.
Signed-off-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20250108202515.385902-3-david.kaplan@amd.com
All CPU vulnerabilities with command line options map to a single X86_BUG bit
except for Spectre V2 where both the spectre_v2 and spectre_v2_user command
line options are related to the same bug.
The spectre_v2 command line options mostly relate to user->kernel and
guest->host mitigations, while the spectre_v2_user command line options relate
to user->user or guest->guest protections.
Define a new X86_BUG bit for spectre_v2_user so each *_select_mitigation()
function in bugs.c is related to a unique X86_BUG bit.
No functional changes.
Signed-off-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20250108202515.385902-2-david.kaplan@amd.com
Replace X86_CMPXCHG64 with X86_CX8, as CX8 is the name of the CPUID
flag, thus to make it consistent with X86_FEATURE_CX8 defined in
<asm/cpufeatures.h>.
No functional change intended.
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250228082338.73859-2-xin@zytor.com
Sometimes it can be very useful to run CPU vulnerability mitigations on
systems where they aren't known to mitigate any real-world
vulnerabilities. This can be handy for mundane reasons like debugging
HW-agnostic logic on whatever machine is to hand, but also for research
reasons: while some mitigations are focused on individual vulns and
uarches, others are fairly general, and it's strategically useful to
have an idea how they'd perform on systems where they aren't currently
needed.
As evidence for this being useful, a flag specifically for Retbleed was
added in:
5c9a92dec3 ("x86/bugs: Add retbleed=force").
Since CPU bugs are tracked using the same basic mechanism as features,
and there are already parameters for manipulating them by hand, extend
that mechanism to support bug as well as capabilities.
With this patch and setcpuid=srso, a QEMU guest running on an Intel host
will boot with Safe-RET enabled.
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20241220-force-cpu-bug-v2-3-7dc71bce742a@google.com
In preparation for adding support to inject fake CPU bugs at boot-time,
add a general facility to force enablement of CPU flags.
The flag taints the kernel and the documentation attempts to be clear
that this is highly unsuitable for uses outside of kernel development
and platform experimentation.
The new arg is parsed just like clearcpuid, but instead of leading to
setup_clear_cpu_cap() it leads to setup_force_cpu_cap().
I've tested this by booting a nested QEMU guest on an Intel host, which
with setcpuid=svm will claim that it supports AMD virtualization.
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20241220-force-cpu-bug-v2-2-7dc71bce742a@google.com
This is in preparation for a later commit that will reuse this code, to
make review convenient.
Factor out a helper function which does the full handling for this arg
including printing info to the console.
No functional change intended.
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20241220-force-cpu-bug-v2-1-7dc71bce742a@google.com
When running in a virtual machine, we might see the original hardware CPU
vendor string (i.e. "AuthenticAMD"), but a model and family ID set by the
hypervisor. In case we run on AMD hardware and the hypervisor sets a model
ID < 0x14, the LAHF cpu feature is eliminated from the the list of CPU
capabilities present to circumvent a bug with some BIOSes in conjunction with
AMD K8 processors.
Parsing the flags list from /proc/cpuinfo seems to be happening mostly in
bash scripts and prebuilt Docker containers, as it does not need to have
additionals tools present – even though more reliable ways like using "kcpuid",
which calls the CPUID instruction instead of parsing a list, should be preferred.
Scripts, that use /proc/cpuinfo to determine if the current CPU is
"compliant" with defined microarchitecture levels like x86-64-v2 will falsely
claim the CPU is incapable of modern CPU instructions when "lahf_lm" is missing
in that flags list.
This can prevent some docker containers from starting or build scripts to create
unoptimized binaries.
Admittably, this is more a small inconvenience than a severe bug in the kernel
and the shoddy scripts that rely on parsing /proc/cpuinfo
should be fixed instead.
This patch adds an additional check to see if we're running inside a
virtual machine (X86_FEATURE_HYPERVISOR is present), which, to my
understanding, can't be present on a real K8 processor as it was introduced
only with the later/other Athlon64 models.
Example output with the "lahf_lm" flag missing in the flags list
(should be shown between "hypervisor" and "abm"):
$ cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 15
model : 6
model name : Common KVM processor
stepping : 1
microcode : 0x1000065
cpu MHz : 2599.998
cache size : 512 KB
physical id : 0
siblings : 1
core id : 0
cpu cores : 1
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx rdtscp
lm rep_good nopl cpuid extd_apicid tsc_known_freq pni
pclmulqdq ssse3 fma cx16 sse4_1 sse4_2 x2apic movbe popcnt
tsc_deadline_timer aes xsave avx f16c hypervisor abm
3dnowprefetch vmmcall bmi1 avx2 bmi2 xsaveopt
... while kcpuid shows the feature to be present in the CPU:
# kcpuid -d | grep lahf
lahf_lm - LAHF/SAHF available in 64-bit mode
[ mingo: Updated the comment a bit, incorporated Boris's review feedback. ]
Signed-off-by: Max Grobecker <max@grobecker.info>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: linux-kernel@vger.kernel.org
Cc: Borislav Petkov <bp@alien8.de>
Minimum version of binutils required to compile the kernel is 2.25.
This version correctly handles the "lock" prefix, so it is possible
to remove the semicolon, which was used to support ancient versions
of GNU as.
Due to the semicolon, the compiler considers "lock; insn" as two
separate instructions. Removing the semicolon makes asm length
calculations more accurate, consequently making scheduling and
inlining decisions of the compiler more accurate.
Removing the semicolon also enables assembler checks involving lock
prefix. Trying to assemble e.g. "lock andl %eax, %ebx" results in:
Error: expecting lockable instruction after `lock'
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250228085149.2478245-1-ubizjak@gmail.com
The following commit:
1c811d403a ("x86/sev: Fix position dependent variable references in startup code")
introduced RIP_REL_REF() to force RIP-relative accesses to global variables,
as needed to prevent crashes during early SEV/SME startup code.
For completeness, RIP_REL_REF() should be used with additional variables during
sme_enable():
https://lore.kernel.org/all/CAMj1kXHnA0fJu6zh634=fbJswp59kSRAbhW+ubDGj1+NYwZJ-Q@mail.gmail.com/
Access these vars with RIP_REL_REF() to prevent problem reoccurence.
Fixes: 1c811d403a ("x86/sev: Fix position dependent variable references in startup code")
Signed-off-by: Kevin Loughlin <kevinloughlin@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/20241122202322.977678-1-kevinloughlin@google.com
Fix this sparse warning:
arch/x86/kernel/quirks.c:662:6: warning: symbol 'x86_apple_machine' was not declared. Should it be static?
Signed-off-by: Zhang Kunbo <zhangkunbo@huawei.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20241126015636.3463994-1-zhangkunbo@huawei.com
Fix this sparse warning:
arch/x86/kernel/i8259.c:57:15: warning: symbol 'io_apic_irqs' was not declared. Should it be static?
Signed-off-by: Zhang Kunbo <zhangkunbo@huawei.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20241126020511.3464664-1-zhangkunbo@huawei.com
The first GDT descriptor is reserved as 'NULL descriptor'. As bits 0
and 1 of a segment selector, i.e., the RPL bits, are NOT used to index
GDT, selector values 0~3 all point to the NULL descriptor, thus values
0, 1, 2 and 3 are all valid NULL selector values.
When a NULL selector value is to be loaded into a segment register,
reload_segments() sets its RPL bits. Later IRET zeros ES, FS, GS, and
DS segment registers if any of them is found to have any nonzero NULL
selector value. The two operations offset each other to actually effect
a nop.
Besides, zeroing of RPL in NULL selector values is an information leak
in pre-FRED systems as userspace can spot any interrupt/exception by
loading a nonzero NULL selector, and waiting for it to become zero.
But there is nothing software can do to prevent it before FRED.
ERETU, the only legit instruction to return to userspace from kernel
under FRED, by design does NOT zero any segment register to avoid this
problem behavior.
As such, leave NULL selector values 0~3 unchanged and close the leak.
Do the same on 32-bit kernel as well.
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241126184529.1607334-1-xin@zytor.com
print_xstate_features() currently invokes print_xstate_feature() multiple
times on separate lines, which can be simplified in a loop.
print_xstate_feature() already checks the feature's enabled status and is
only called within print_xstate_features(). Inline print_xstate_feature()
and iterate over features in a loop to streamline the enabling message.
No functional changes.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/20250227184502.10288-2-chang.seok.bae@intel.com
Before restoring xstate from the user space buffer, the kernel performs
sanity checks on these magic numbers: magic1 in the software reserved
area, and magic2 at the end of XSAVE region.
The position of magic2 is calculated based on the xstate size derived
from the user space buffer. But, the in-kernel record is directly
available and reliable for this purpose.
This reliance on user space data is also inconsistent with the recent
fix in:
d877550eaf ("x86/fpu: Stop relying on userspace for info to fault in xsave buffer")
Simply use fpstate->user_size, and then get rid of unnecessary
size-evaluation code.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/20241211014500.3738-1-chang.seok.bae@intel.com
Refactor parity calculations to use the standard parity8() helper. This
change eliminates redundant implementations and improves code
efficiency.
[ ubizjak: Updated the patch to apply to the latest x86 tree. ]
Co-developed-by: Yu-Chun Lin <eleanor15x@gmail.com>
Signed-off-by: Yu-Chun Lin <eleanor15x@gmail.com>
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lore.kernel.org/r/20250227125616.2253774-1-ubizjak@gmail.com
Because calls to get_this_hybrid_cpu_type() and
get_this_hybrid_cpu_native_id() are not required now. cpu-type and
native-model-id are cached at boot in per-cpu struct cpuinfo_topology.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/20241211-add-cpu-type-v5-4-2ae010f50370@linux.intel.com
get_this_hybrid_cpu_type() misses a case when cpu-type is populated
regardless of X86_FEATURE_HYBRID_CPU. This is particularly true for hybrid
variants that have P or E cores fused off.
Instead use the cpu-type cached in struct x86_topology, as it does not rely
on hybrid feature to enumerate cpu-type. This can also help avoid the
model-specific fixup get_hybrid_cpu_type(). Also replace the
get_this_hybrid_cpu_native_id() with its cached value in struct
x86_topology.
While at it, remove enum hybrid_cpu_type as it serves no purpose when we
have the exact cpu-types defined in enum intel_cpu_type. Also rename
atom_native_id to intel_native_id and move it to intel-family.h where
intel_cpu_type lives.
Suggested-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/20241211-add-cpu-type-v5-3-2ae010f50370@linux.intel.com
The hex values in CPU debug interface are not prefixed with 0x. This may
cause misinterpretation of values. Fix it.
[ mingo: Restore previous vertical alignment of the output. ]
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/20241211-add-cpu-type-v5-1-2ae010f50370@linux.intel.com
The CONFIG_EISA menu was cleaned up in 2018, but this inadvertently
brought the option back on 64-bit machines: ISA remains guarded by
a CONFIG_X86_32 check, but EISA no longer depends on ISA.
The last Intel machines ith EISA support used a 82375EB PCI/EISA bridge
from 1993 that could be paired with the 440FX chipset on early Pentium-II
CPUs, long before the first x86-64 products.
Fixes: 6630a8e501 ("eisa: consolidate EISA Kconfig entry in drivers/eisa")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250226213714.4040853-11-arnd@kernel.org
ST ConneXt STA2x11 was an interface chip for Atom E6xx processors,
using a number of components usually found on Arm SoCs. Most of this
was merged upstream, but it was never complete enough to actually work
and has been abandoned for many years.
We already had an agreement on removing it in 2022, but nobody ever
submitted the patch to do it.
Without STA2x11, CONFIG_X86_32_NON_STANDARD no longer has any
use - remove it.
Suggested-by: Davide Ciminaghi <ciminaghi@gnudd.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250226213714.4040853-10-arnd@kernel.org
The X86_INTEL_MID code was originally introduced for the 32-bit
Moorestown/Medfield/Clovertrail platform, later the 64-bit
Merrifield/Moorefield variants were added, but the final Morganfield
14nm platform was canceled before it hit the market.
To help users understand what the option actually refers to, update the
help text, and add a dependency on 64-bit kernels.
Ferry confirmed that all the hardware can run 64-bit kernels these days,
but is still testing 32-bit kernels on the Intel Edison board, so this
remains possible, but is guarded by a CONFIG_EXPERT dependency now,
to gently push remaining users towards using CONFIG_64BIT.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Andy Shevchenko <andy@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250226213714.4040853-9-arnd@kernel.org
With the maximum amount of RAM now 4GB, there is very little point
to still have PTE pages in highmem. Drop this for simplification.
The only other architecture supporting HIGHPTE is 32-bit arm, and
once that feature is removed as well, the highpte logic can be
dropped from common code as well.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250226213714.4040853-8-arnd@kernel.org
Since kernels with and without CONFIG_X86_PAE are now limited
to the low 4GB of physical address space, there is no need to
use swiotlb any more, so stop selecting this.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250226213714.4040853-7-arnd@kernel.org
HIGHMEM64G support was added in linux-2.3.25 to support (then)
high-end Pentium Pro and Pentium III Xeon servers with more than 4GB of
addressing, NUMA and PCI-X slots started appearing.
I have found no evidence of this ever being used in regular dual-socket
servers or consumer devices, all the users seem obsolete these days,
even by i386 standards:
- Support for NUMA servers (NUMA-Q, IBM x440, unisys) was already
removed ten years ago.
- 4+ socket non-NUMA servers based on Intel 450GX/450NX, HP F8 and
ServerWorks ServerSet/GrandChampion could theoretically still work
with 8GB, but these were exceptionally rare even 20 years ago and
would have usually been equipped with than the maximum amount of
RAM.
- Some SKUs of the Celeron D from 2004 had 64-bit mode fused off but
could still work in a Socket 775 mainboard designed for the later
Core 2 Duo and 8GB. Apparently most BIOSes at the time only allowed
64-bit CPUs.
- The rare Xeon LV "Sossaman" came on a few motherboards with
registered DDR2 memory support up to 16GB.
- In the early days of x86-64 hardware, there was sometimes the need
to run a 32-bit kernel to work around bugs in the hardware drivers,
or in the syscall emulation for 32-bit userspace. This likely still
works but there should never be a need for this any more.
PAE mode is still required to get access to the 'NX' bit on Atom
'Pentium M' and 'Core Duo' CPUs.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250226213714.4040853-6-arnd@kernel.org
The x86 CPU selection menu is confusing for a number of reasons:
When configuring 32-bit kernels, it shows a small number of early 64-bit
microarchitectures (K8, Core 2) but not the regular generic 64-bit target
that is the normal default. There is no longer a reason to run 32-bit
kernels on production 64-bit systems, so only actual 32-bit CPUs need
to be shown here.
When configuring 64-bit kernels, the options also pointless as there is
no way to pick any CPU from the past 15 years, leaving GENERIC_CPU as
the only sensible choice.
Address both of the above by removing the obsolete options and making
all 64-bit kernels run on both Intel and AMD CPUs from any generation.
Testing generic 32-bit kernels on 64-bit hardware remains possible,
just not building a 32-bit kernel that requires a 64-bit CPU.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250226213714.4040853-5-arnd@kernel.org
Building an x86-64 kernel with CONFIG_GENERIC_CPU is documented to
run on all CPUs, but the Makefile does not actually pass an -march=
argument, instead relying on the default that was used to configure
the toolchain.
In many cases, gcc will be configured to -march=x86-64 or -march=k8
for maximum compatibility, but in other cases a distribution default
may be either raised to a more recent ISA, or set to -march=native
to build for the CPU used for compilation. This still works in the
case of building a custom kernel for the local machine.
The point where it breaks down is building a kernel for another
machine that is older the the default target. Changing the default
to -march=x86-64 would make it work reliable, but possibly produce
worse code on distros that intentionally default to a newer ISA.
To allow reliably building a kernel for either the oldest x86-64
CPUs, pass the -march=x86-64 flag to the compiler. This was not
possible in early versions of x86-64 gcc, but works on all currently
supported versions down to at least gcc-5.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250226213714.4040853-4-arnd@kernel.org
The x86-32 kernel used to support multiple platforms with more than eight
logical CPUs, from the 1999-2003 timeframe: Sequent NUMA-Q, IBM Summit,
Unisys ES7000 and HP F8. Support for all except the latter was dropped
back in 2014, leaving only the F8 based DL740 and DL760 G2 machines in
this catery, with up to eight single-core Socket-603 Xeon-MP processors
with hyperthreading.
Like the already removed machines, the HP F8 servers at the time cost
upwards of $100k in typical configurations, but were quickly obsoleted
by their 64-bit Socket-604 cousins and the AMD Opteron.
Earlier servers with up to 8 Pentium Pro or Xeon processors remain
fully supported as they had no hyperthreading. Similarly, the more
common 4-socket Xeon-MP machines with hyperthreading using Intel
or ServerWorks chipsets continue to work without this, and all the
multi-core Xeon processors also run 64-bit kernels.
While the "bigsmp" support can also be used to run on later 64-bit
machines (including VM guests), it seems best to discourage that
and get any remaining users to update their kernels to 64-bit builds
on these. As a side-effect of this, there is also no more need to
support NUMA configurations on 32-bit x86, as all true 32-bit
NUMA platforms are already gone.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250226213714.4040853-3-arnd@kernel.org
An older cleanup of mine inadvertently removed geode-gx1 and geode-lx
from the list of CPUs that are known to support a working cmpxchg8b.
Fixes: 88a2b4edda ("x86/Kconfig: Rework CONFIG_X86_PAE dependency")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250226213714.4040853-2-arnd@kernel.org
We are going to apply a new series that conflicts with pending
work in x86/mm, so merge in x86/mm to avoid it, and also to
refresh the x86/cpu branch with fixes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
X86_FEATURE_USE_IBPB was introduced in:
2961298efe ("x86/cpufeatures: Clean up Spectre v2 related CPUID flags")
to have separate flags for when the CPU supports IBPB (i.e. X86_FEATURE_IBPB)
and when an IBPB is actually used to mitigate Spectre v2.
Ever since then, the uses of IBPB expanded. The name became confusing
because it does not control all IBPB executions in the kernel.
Furthermore, because its name is generic and it's buried within
indirect_branch_prediction_barrier(), it's easy to use it not knowing
that it is specific to Spectre v2.
X86_FEATURE_USE_IBPB is no longer needed because all the IBPB executions
it used to control are now controlled through other means (e.g.
switch_mm_*_ibpb static branches).
Remove the unused feature bit.
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20250227012712.3193063-7-yosry.ahmed@linux.dev
On synthesized nested VM-exits in VMX, an IBPB is performed if IBRS is
advertised to the guest to properly provide separate prediction domains
for L1 and L2. However, this is currently conditional on
X86_FEATURE_USE_IBPB, which depends on the host spectre_v2_user
mitigation.
In short, if spectre_v2_user=no, IBRS is not virtualized correctly and
L1 becomes susceptible to attacks from L2. Fix this by performing the
IBPB regardless of X86_FEATURE_USE_IBPB.
Fixes: 2e7eab8142 ("KVM: VMX: Execute IBPB on emulated VM-exit when guest has IBRS")
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Jim Mattson <jmattson@google.com>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Acked-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20250227012712.3193063-6-yosry.ahmed@linux.dev
Instead of using X86_FEATURE_USE_IBPB to guard the IBPB execution in KVM
when a new vCPU is loaded, introduce a static branch, similar to
switch_mm_*_ibpb.
This makes it obvious in spectre_v2_user_select_mitigation() what
exactly is being toggled, instead of the unclear X86_FEATURE_USE_IBPB
(which will be shortly removed). It also provides more fine-grained
control, making it simpler to change/add paths that control the IBPB in
the vCPU switch path without affecting other IBPBs.
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Acked-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20250227012712.3193063-5-yosry.ahmed@linux.dev
If X86_FEATURE_USE_IBPB is not set, then both spectre_v2_user_ibpb and
spectre_v2_user_stibp are set to SPECTRE_V2_USER_NONE in
spectre_v2_user_select_mitigation(). Since ib_prctl_set() already checks
for this before performing the IBPB, the X86_FEATURE_USE_IBPB check is
redundant. Remove it.
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20250227012712.3193063-4-yosry.ahmed@linux.dev
The check is performed when either switch_mm_cond_ibpb or
switch_mm_always_ibpb is set. In both cases, X86_FEATURE_USE_IBPB is
always set. Remove the redundant check.
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20250227012712.3193063-3-yosry.ahmed@linux.dev
indirect_branch_prediction_barrier() only performs the MSR write if
X86_FEATURE_USE_IBPB is set, using alternative_msr_write(). In
preparation for removing X86_FEATURE_USE_IBPB, move the feature check
into the callers so that they can be addressed one-by-one, and use
X86_FEATURE_IBPB instead to guard the MSR write.
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Acked-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20250227012712.3193063-2-yosry.ahmed@linux.dev
Change parity bit with XOR when !parity instead of masking bit out
and conditionally setting it when !parity.
Saves a couple of bytes in the object file.
Co-developed-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250226153709.6370-1-ubizjak@gmail.com
The bit pattern of _PAGE_DIRTY set and _PAGE_RW clear is used to mark
shadow stacks. This is currently checked for in mk_pte() but not
pfn_pte(). If we add the check to pfn_pte(), it catches vfree()
calling set_direct_map_invalid_noflush() which calls
__change_page_attr() which loads the old protection bits from the
PTE, clears the specified bits and uses pfn_pte() to construct the
new PTE.
We should, therefore, for kernel mappings, clear the _PAGE_DIRTY bit
consistently whenever we clear _PAGE_RW. I opted to do it in the
callers in case we want to use __change_page_attr() to create shadow
stacks inside the kernel at some point in the future. Arguably, we
might also want to clear _PAGE_ACCESSED here.
Note that the 3 functions involved:
__set_pages_np()
kernel_map_pages_in_pgd()
kernel_unmap_pages_in_pgd()
Only ever manipulate non-swappable kernel mappings, so maintaining
the DIRTY:1|RW:0 special pattern for shadow stacks and DIRTY:0
pattern for non-shadow-stack entries can be maintained consistently
and doesn't result in the unintended clearing of a live dirty bit
that could corrupt (destroy) dirty bit information for user mappings.
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/174051422675.10177.13226545170101706336.tip-bot2@tip-bot2
Closes: https://lore.kernel.org/oe-lkp/202502241646.719f4651-lkp@intel.com
Below is a setup with extended linear cache configuration with an example
layout of memory region shown below presented as a single memory region
consists of 256G memory where there's 128G of DRAM and 128G of CXL memory.
The kernel sees a region of total 256G of system memory.
128G DRAM 128G CXL memory
|-----------------------------------|-------------------------------------|
Data resides in either DRAM or far memory (FM) with no replication. Hot
data is swapped into DRAM by the hardware behind the scenes. When error is
detected in one location, it is possible that error also resides in the
aliased location. Therefore when a memory location that is flagged by MCE
is part of the special region, the aliased memory location needs to be
offlined as well.
Add an mce notify callback to identify if the MCE address location is part
of an extended linear cache region and handle accordingly.
Added symbol export to set_mce_nospec() in x86 code in order to call
set_mce_nospec() from the CXL MCE notify callback.
Link: https://lore.kernel.org/linux-cxl/668333b17e4b2_5639294fd@dwillia2-xfh.jf.intel.com.notmuch/
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Li Ming <ming.li@zohomail.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/20250226162224.3633792-5-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
It seems that the attr parameter was never been used in security
checks since it was first introduced by:
commit da97e18458 ("perf_event: Add support for LSM and SELinux checks")
so remove it.
Signed-off-by: Luo Gengkun <luogengkun@huaweicloud.com>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Remove kvm_arch_sync_events() now that x86 no longer uses it (no other
arch has ever used it).
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Acked-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-ID: <20250224235542.2562848-8-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fold the guts of kvm_arch_sync_events() into kvm_arch_pre_destroy_vm(), as
the kvmclock and PIT background workers only need to be stopped before
destroying vCPUs (to avoid accessing vCPUs as they are being freed); it's
a-ok for them to be running while the VM is visible on the global vm_list.
Note, the PIT also needs to be stopped before IRQ routing is freed
(because KVM's IRQ routing is garbage and assumes there is always non-NULL
routing).
Opportunistically add comments to explain why KVM stops/frees certain
assets early.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250224235542.2562848-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When destroying a VM, unload a vCPU's MMUs as part of normal vCPU freeing,
instead of as a separate prepratory action. Unloading MMUs ahead of time
is a holdover from commit 7b53aa5650 ("KVM: Fix vcpu freeing for guest
smp"), which "fixed" a rather egregious flaw where KVM would attempt to
free *all* MMU pages when destroying a vCPU.
At the time, KVM would spin on all MMU pages in a VM when free a single
vCPU, and so would hang due to the way KVM pins and zaps root pages
(roots are invalidated but not freed if they are pinned by a vCPU).
static void free_mmu_pages(struct kvm_vcpu *vcpu)
{
struct kvm_mmu_page *page;
while (!list_empty(&vcpu->kvm->active_mmu_pages)) {
page = container_of(vcpu->kvm->active_mmu_pages.next,
struct kvm_mmu_page, link);
kvm_mmu_zap_page(vcpu->kvm, page);
}
free_page((unsigned long)vcpu->mmu.pae_root);
}
Now that KVM doesn't try to free all MMU pages when destroying a single
vCPU, there's no need to unpin roots prior to destroying a vCPU.
Note! While KVM mostly destroys all MMUs before calling
kvm_arch_destroy_vm() (see commit f00be0cae4 ("KVM: MMU: do not free
active mmu pages in free_mmu_pages()")), unpinning MMU roots during vCPU
destruction will unfortunately trigger remote TLB flushes, i.e. will try
to send requests to all vCPUs.
Happily, thanks to commit 27592ae8db ("KVM: Move wiping of the kvm->vcpus
array to common code"), that's a non-issue as freed vCPUs are naturally
skipped by xa_for_each_range(), i.e. by kvm_for_each_vcpu(). Prior to that
commit, KVM x86 rather stupidly freed vCPUs one-by-one, and _then_
nullified them, one-by-one. I.e. triggering a VM-wide request would hit a
use-after-free.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250224235542.2562848-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Don't load (and then put) a vCPU when unloading its MMU during VM
destruction, as nothing in kvm_mmu_unload() accesses vCPU state beyond the
root page/address of each MMU, i.e. can't possible need to run with the
vCPU loaded.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250224235542.2562848-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In preparation of support of inline static calls on powerpc, provide
trampoline address when updating sites, so that when the destination
function is too far for a direct function call, the call site is
patched with a call to the trampoline.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/5efe0cffc38d6f69b1ec13988a99f1acff551abf.1733245362.git.christophe.leroy@csgroup.eu
We get a warning when building the kernel with W=1:
arch/x86/boot/compressed/cpuflags.c:4:6: warning: no previous prototype for ‘has_cpuflag’ [-Werror=missing-prototypes]
4 | bool has_cpuflag(int flag)
| ^~~~~~~~~~~
Add a function declaration to cpuflags.h
Signed-off-by: Zhou Ding <zhouding@cmss.chinamobile.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20241217162859.1167889-1-zhouding@cmss.chinamobile.com
The init_task instance of struct task_struct is statically allocated and
may not contain the full FP state for userspace. As such, limit the copy
to the valid area of both init_task and 'dst' and ensure all memory is
initialized.
Note that the FP state is only needed for userspace, and as such it is
entirely reasonable for init_task to not contain parts of it.
Fixes: 5aaeb5c01c ("x86/fpu, sched: Introduce CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT and use it on x86")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20250226133136.816901-1-benjamin@sipsolutions.net
----
v2:
- Fix code if arch_task_struct_size < sizeof(init_task) by using
memcpy_and_pad.
Add support for
CPUID Fn8000_0021_EAX[31] (SRSO_MSR_FIX). If this bit is 1, it
indicates that software may use MSR BP_CFG[BpSpecReduce] to mitigate
SRSO.
Enable BpSpecReduce to mitigate SRSO across guest/host boundaries.
Switch back to enabling the bit when virtualization is enabled and to
clear the bit when virtualization is disabled because using a MSR slot
would clear the bit when the guest is exited and any training the guest
has done, would potentially influence the host kernel when execution
enters the kernel and hasn't VMRUN the guest yet.
More detail on the public thread in Link below.
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20241202120416.6054-1-bp@kernel.org
Saves a CALL to an out-of-line thunk for the common case of 1
argument.
Suggested-by: Scott Constable <scott.d.constable@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20250224124200.927885784@infradead.org
While WAIT_FOR_ENDBR is specified to be a full speculation stop; it
has been shown that some implementations are 'leaky' to such an extend
that speculation can escape even the FineIBT preamble.
To deal with this, add additional hardening to the FineIBT preamble.
Notably, using a new LLVM feature:
e223485c9b
which encodes the number of arguments in the kCFI preamble's register.
Using this register<->arity mapping, have the FineIBT preamble CALL
into a stub clobbering the relevant argument registers in the
speculative case.
Scott sayeth thusly:
Microarchitectural attacks such as Branch History Injection (BHI) and
Intra-mode Branch Target Injection (IMBTI) [1] can cause an indirect
call to mispredict to an adversary-influenced target within the same
hardware domain (e.g., within the kernel). Instructions at the
mispredicted target may execute speculatively and potentially expose
kernel data (e.g., to a user-mode adversary) through a
microarchitectural covert channel such as CPU cache state.
CET-IBT [2] is a coarse-grained control-flow integrity (CFI) ISA
extension that enforces that each indirect call (or indirect jump)
must land on an ENDBR (end branch) instruction, even speculatively*.
FineIBT is a software technique that refines CET-IBT by associating
each function type with a 32-bit hash and enforcing (at the callee)
that the hash of the caller's function pointer type matches the hash
of the callee's function type. However, recent research [3] has
demonstrated that the conditional branch that enforces FineIBT's hash
check can be coerced to mispredict, potentially allowing an adversary
to speculatively bypass the hash check:
__cfi_foo:
ENDBR64
SUB R10d, 0x01234567
JZ foo # Even if the hash check fails and ZF=0, this branch could still mispredict as taken
UD2
foo:
...
The techniques demonstrated in [3] require the attacker to be able to
control the contents of at least one live register at the mispredicted
target. Therefore, this patch set introduces a sequence of CMOV
instructions at each indirect-callable target that poisons every live
register with data that the attacker cannot control whenever the
FineIBT hash check fails, thus mitigating any potential attack.
The security provided by this scheme has been discussed in detail on
an earlier thread [4].
[1] https://www.intel.com/content/www/us/en/developer/articles/technical/software-security-guidance/technical-documentation/branch-history-injection.html
[2] Intel Software Developer's Manual, Volume 1, Chapter 18
[3] https://www.vusec.net/projects/native-bhi/
[4] https://lore.kernel.org/lkml/20240927194925.707462984@infradead.org/
*There are some caveats for certain processors, see [1] for more info
Suggested-by: Scott Constable <scott.d.constable@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20250224124200.820402212@infradead.org
Add an array of code thunks, to be called from the FineIBT preamble,
clobbering the first 'n' argument registers for speculative execution.
Notably the 0th entry will clobber no argument registers and will never
be used, it exists so the array can be naturally indexed, while the 7th
entry will clobber all the 6 argument registers and also RSP in order to
mess up stack based arguments.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20250224124200.717378681@infradead.org
Due to concerns about circumvention attacks against FineIBT on 'naked'
ENDBR, add an additional caller side hash check to FineIBT. This
should make it impossible to pivot over such a 'naked' ENDBR
instruction at the cost of an additional load.
The specific pivot reported was against the SYSCALL entry site and
FRED will have all those holes fixed up.
https://lore.kernel.org/linux-hardening/Z60NwR4w%2F28Z7XUa@ubun/
This specific fineibt_paranoid_start[] sequence was concocted by
Scott.
Suggested-by: Scott Constable <scott.d.constable@intel.com>
Reported-by: Jennifer Miller <jmill@asu.edu>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20250224124200.598033084@infradead.org
Because overlapping code sequences are all the rage.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20250224124200.486463917@infradead.org
Scott notes that non-taken branches are faster. Abuse overlapping code
that traps instead of explicit UD2 instructions.
And LEA does not modify flags and will have less dependencies.
Suggested-by: Scott Constable <scott.d.constable@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20250224124200.371942555@infradead.org
The normal fixup in handle_bug() is simply continuing at the next
instruction. However upcoming patches make this the wrong thing, so
allow handlers (specifically handle_cfi_failure()) to over-ride
regs->ip.
The callchain is such that the fixup needs to be done before it is
determined if the exception is fatal, as such, revert any changes in
that case.
Additionally, have handle_cfi_failure() remember the regs->ip value it
starts with for reporting.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20250224124200.275223080@infradead.org
FineIBT will start using 0xEA as #UD. Normally '0xEA' is a 'bad',
invalid instruction for the CPU.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20250224124200.166774696@infradead.org
The call to mce_notify_irq() has been there since the initial version of
the soft inject mce machinery, introduced in
ea149b36c7 ("x86, mce: add basic error injection infrastructure").
At that time it was functional since injecting an MCE resulted in the
following call chain:
raise_mce()
->machine_check_poll()
->mce_log() - sets notfiy_user_bit
->mce_notify_user() (current mce_notify_irq) consumed the bit and called the
usermode helper.
However, with the introduction of
011d826111 ("RAS: Add a Corrected Errors Collector")
the code got moved around and the usermode helper began to be called via the
early notifier mce_first_notifier() rendering the call in raise_local()
defunct as the mce_need_notify bit (ex notify_user) is only being set from the
early notifier.
Remove the noop call and make mce_notify_irq() static.
No functional changes.
Signed-off-by: Nikolay Borisov <nik.borisov@suse.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20250225143348.268469-1-nik.borisov@suse.com
When in the middle of a kernel source code file a kernel developer
sees a lone #else or #endif:
...
#else
...
It's not obvious at a glance what those preprocessor blocks are
conditional on, if the starting #ifdef is outside visible range.
So apply the standard pattern we use in such cases elsewhere in
the kernel for large preprocessor blocks:
#ifdef CONFIG_XXX
...
...
...
#endif /* CONFIG_XXX */
...
#ifdef CONFIG_XXX
...
...
...
#else /* !CONFIG_XXX: */
...
...
...
#endif /* !CONFIG_XXX */
( Note that in the #else case we use the /* !CONFIG_XXX */ marker
in the final #endif, not /* CONFIG_XXX */, which serves as an easy
visual marker to differentiate #else or #elif related #endif closures
from singular #ifdef/#endif blocks. )
Also clean up __CFI_DEFAULT definition with a bit more vertical alignment
applied, and a pointless tab converted to the standard space we use in
such definitions.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: linux-kernel@vger.kernel.org
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
For when we want to exactly match ENDBR, and not everything that we
can scribble it with.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20250224124200.059556588@infradead.org
Rebuilding with CONFIG_CFI_PERMISSIVE=y enabled is such a pain, esp. since
clang is so slow.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20250224124159.924496481@infradead.org
Process pending events on nested VM-Exit if the vCPU has an injectable IRQ
or NMI, as the event may have become pending while L2 was active, i.e. may
not be tracked in the context of vmcs01. E.g. if L1 has passed its APIC
through to L2 and an IRQ arrives while L2 is active, then KVM needs to
request an IRQ window prior to running L1, otherwise delivery of the IRQ
will be delayed until KVM happens to process events for some other reason.
The missed failure is detected by vmx_apic_passthrough_tpr_threshold_test
in KVM-Unit-Tests, but has effectively been masked due to a flaw in KVM's
PIC emulation that causes KVM to make spurious KVM_REQ_EVENT requests (and
apparently no one ever ran the test with split IRQ chips).
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250224235542.2562848-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Free vCPUs before freeing any VM state, as both SVM and VMX may access
VM state when "freeing" a vCPU that is currently "in" L2, i.e. that needs
to be kicked out of nested guest mode.
Commit 6fcee03df6 ("KVM: x86: avoid loading a vCPU after .vm_destroy was
called") partially fixed the issue, but for unknown reasons only moved the
MMU unloading before VM destruction. Complete the change, and free all
vCPU state prior to destroying VM state, as nVMX accesses even more state
than nSVM.
In addition to the AVIC, KVM can hit a use-after-free on MSR filters:
kvm_msr_allowed+0x4c/0xd0
__kvm_set_msr+0x12d/0x1e0
kvm_set_msr+0x19/0x40
load_vmcs12_host_state+0x2d8/0x6e0 [kvm_intel]
nested_vmx_vmexit+0x715/0xbd0 [kvm_intel]
nested_vmx_free_vcpu+0x33/0x50 [kvm_intel]
vmx_free_vcpu+0x54/0xc0 [kvm_intel]
kvm_arch_vcpu_destroy+0x28/0xf0
kvm_vcpu_destroy+0x12/0x50
kvm_arch_destroy_vm+0x12c/0x1c0
kvm_put_kvm+0x263/0x3c0
kvm_vm_release+0x21/0x30
and an upcoming fix to process injectable interrupts on nested VM-Exit
will access the PIC:
BUG: kernel NULL pointer dereference, address: 0000000000000090
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
CPU: 23 UID: 1000 PID: 2658 Comm: kvm-nx-lpage-re
RIP: 0010:kvm_cpu_has_extint+0x2f/0x60 [kvm]
Call Trace:
<TASK>
kvm_cpu_has_injectable_intr+0xe/0x60 [kvm]
nested_vmx_vmexit+0x2d7/0xdf0 [kvm_intel]
nested_vmx_free_vcpu+0x40/0x50 [kvm_intel]
vmx_vcpu_free+0x2d/0x80 [kvm_intel]
kvm_arch_vcpu_destroy+0x2d/0x130 [kvm]
kvm_destroy_vcpus+0x8a/0x100 [kvm]
kvm_arch_destroy_vm+0xa7/0x1d0 [kvm]
kvm_destroy_vm+0x172/0x300 [kvm]
kvm_vcpu_release+0x31/0x50 [kvm]
Inarguably, both nSVM and nVMX need to be fixed, but punt on those
cleanups for the moment. Conceptually, vCPUs should be freed before VM
state. Assets like the I/O APIC and PIC _must_ be allocated before vCPUs
are created, so it stands to reason that they must be freed _after_ vCPUs
are destroyed.
Reported-by: Aaron Lewis <aaronlewis@google.com>
Closes: https://lore.kernel.org/all/20240703175618.2304869-2-aaronlewis@google.com
Cc: Jim Mattson <jmattson@google.com>
Cc: Yan Zhao <yan.y.zhao@intel.com>
Cc: Rick P Edgecombe <rick.p.edgecombe@intel.com>
Cc: Kai Huang <kai.huang@intel.com>
Cc: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250224235542.2562848-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add support for "Idle HLT" interception on AMD CPUs, and enable Idle HLT
interception instead of "normal" HLT interception for all VMs for which
HLT-exiting is enabled. Idle HLT provides a mild performance boost for
all VM types, by avoiding a VM-Exit in the scenario where KVM would
immediately "wake" and resume the vCPU.
Idle HLT makes HLT-exiting conditional on the vCPU not having a valid,
unmasked interrupt. Specifically, a VM-Exit occurs on execution of HLT
if and only if there are no pending V_IRQ or V_NMI events. Note, Idle
is a replacement for full HLT interception, i.e. enabling HLT interception
would result in all HLT instructions causing unconditional VM-Exits. Per
the APM:
When both HLT and Idle HLT intercepts are active at the same time, the
HLT intercept takes priority. This intercept occurs only if a virtual
interrupt is not pending (V_INTR or V_NMI).
For KVM's use of V_IRQ (also called V_INTR in the APM) to detect interrupt
windows, the net effect of enabling Idle HLT is that, if a virtual
interupt is pending and unmasked at the time of HLT, the vCPU will take
a V_IRQ intercept instead of a HLT intercept.
When AVIC is enabled, Idle HLT works as intended: the vCPU continues
unimpeded and services the pending virtual interrupt.
Note, the APM's description of V_IRQ interaction with AVIC is quite
confusing, and requires piecing together implied behavior. Per the APM,
when AVIC is enabled, V_IRQ *from the VMCB* is ignored:
When AVIC mode is enabled for a virtual processor, the V_IRQ, V_INTR_PRIO,
V_INTR_VECTOR, and V_IGN_TPR fields in the VMCB are ignored.
Which seems to contradict the behavior of Idle HLT:
This intercept occurs only if a virtual interrupt is not pending (V_INTR
or V_NMI).
What's not explicitly stated is that hardware's internal copy of V_IRQ
(and related fields) *are* still active, i.e. are presumably used to cache
information from the virtual APIC.
Handle Idle HLT exits as if they were normal HLT exits, e.g. don't try to
optimize the handling under the assumption that there isn't a pending IRQ.
Irrespective of AVIC, Idle HLT is inherently racy with respect to the vIRR,
as KVM can set vIRR bits asychronously.
No changes are required to support KVM's use Idle HLT while running
L2. In fact, supporting Idle HLT is actually a bug fix to some extent.
If L1 wants to intercept HLT, recalc_intercepts() will enable HLT
interception in vmcb02 and forward the intercept to L1 as normal.
But if L1 does not want to intercept HLT, then KVM will run L2 with Idle
HLT enabled and HLT interception disabled. If a V_IRQ or V_NMI for L2
becomes pending and L2 executes HLT, then use of Idle HLT will do the
right thing, i.e. not #VMEXIT and instead deliver the virtual event. KVM
currently doesn't handle this scenario correctly, e.g. doesn't check V_IRQ
or V_NMI in vmcs02 as part of kvm_vcpu_has_events().
Do not expose Idle HLT to L1 at this time, as supporting nested Idle HLT is
more complex than just enumerating the feature, e.g. requires KVM to handle
the aforementioned scenarios of V_IRQ and V_NMI at the time of exit.
Signed-off-by: Manali Shukla <Manali.Shukla@amd.com>
Reviewed-by: Nikunj A Dadhania <nikunj@amd.com>
Link: https://bugzilla.kernel.org/attachment.cgi?id=306250
Link: https://lore.kernel.org/r/20250128124812.7324-3-manali.shukla@amd.com
[sean: rewrite changelog, drop nested "support"]
Signed-off-by: Sean Christopherson <seanjc@google.com>
The Idle HLT Intercept feature allows for the HLT instruction
execution by a vCPU to be intercepted by the hypervisor only if there
are no pending events (V_INTR and V_NMI) for the vCPU. When the vCPU
is expected to service the pending events (V_INTR and V_NMI), the Idle
HLT intercept won’t trigger. The feature allows the hypervisor to
determine if the vCPU is idle and reduces wasteful VMEXITs.
In addition to the aforementioned use case, the Idle HLT intercept
feature is also used for enlightened guests who aim to securely manage
events without the hypervisor’s awareness. If a HLT occurs while
a virtual event is pending and the hypervisor is unaware of this
pending event (as could be the case with enlightened guests), the
absence of the Idle HLT intercept feature could result in a vCPU being
suspended indefinitely.
Presence of Idle HLT intercept feature for guests is indicated via CPUID
function 0x8000000A_EDX[30].
Signed-off-by: Manali Shukla <Manali.Shukla@amd.com>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20250128124812.7324-2-manali.shukla@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Provide helpers to set the error code when converting VMGEXIT SW_EXITINFO1 and
SW_EXITINFO2 codes from plain numbers to proper defines. Add comments for
better code readability.
No functionality changed.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Melody Wang <huibo.wang@amd.com>
Link: https://lore.kernel.org/r/20250225213937.2471419-3-huibo.wang@amd.com
[sean: tweak comments, fix formatting goofs]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Convert VMGEXIT SW_EXITINFO1 codes from plain numbers to proper defines.
Opportunistically update the comment for the malformed input "sub-error"
codes to state that they are defined by the GHCB, and to capure the
relationship to the malformed input response.
No functional change intended.
Signed-off-by: Melody Wang <huibo.wang@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Pavan Kumar Paluri <papaluri@amd.com>
Link: https://lore.kernel.org/r/20250225213937.2471419-2-huibo.wang@amd.com
[sean: update comments]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add Arrow Lake U model for RAPL:
$ ls -1 /sys/devices/power/events/
energy-cores
energy-cores.scale
energy-cores.unit
energy-gpu
energy-gpu.scale
energy-gpu.unit
energy-pkg
energy-pkg.scale
energy-pkg.unit
energy-psys
energy-psys.scale
energy-psys.unit
The same output as ArrowLake:
$ perf stat -a -I 1000 --per-socket -e power/energy-pkg/
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20241224145516.349028-1-aaron.ma@canonical.com
When both of X86_LOCAL_APIC and X86_THERMAL_VECTOR are disabled,
the irq tracing produces a W=1 build warning for the tracing
definitions:
In file included from include/trace/trace_events.h:27,
from include/trace/define_trace.h:113,
from arch/x86/include/asm/trace/irq_vectors.h:383,
from arch/x86/kernel/irq.c:29:
include/trace/stages/init.h:2:23: error: 'str__irq_vectors__trace_system_name' defined but not used [-Werror=unused-const-variable=]
Make the tracepoints conditional on the same symbosl that guard
their usage.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250225213236.3141752-1-arnd@kernel.org
I still have some Soekris net4826 in a Community Wireless Network I
volunteer with. These devices use an AMD SC1100 SoC. I am running
OpenWrt on them, which uses a patched kernel, that naturally has
evolved over time. I haven't updated the ones in the field in a
number of years (circa 2017), but have one in a test bed, where I have
intermittently tried out test builds.
A few years ago, I noticed some trouble, particularly when "warm
booting", that is, doing a reboot without removing power, and noticed
the device was hanging after the kernel message:
[ 0.081615] Working around Cyrix MediaGX virtual DMA bugs.
If I removed power and then restarted, it would boot fine, continuing
through the message above, thusly:
[ 0.081615] Working around Cyrix MediaGX virtual DMA bugs.
[ 0.090076] Enable Memory-Write-back mode on Cyrix/NSC processor.
[ 0.100000] Enable Memory access reorder on Cyrix/NSC processor.
[ 0.100070] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.110058] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.120037] CPU: NSC Geode(TM) Integrated Processor by National Semi (family: 0x5, model: 0x9, stepping: 0x1)
[...]
In order to continue using modern tools, like ssh, to interact with
the software on these old devices, I need modern builds of the OpenWrt
firmware on the devices. I confirmed that the warm boot hang was still
an issue in modern OpenWrt builds (currently using a patched linux
v6.6.65).
Last night, I decided it was time to get to the bottom of the warm
boot hang, and began bisecting. From preserved builds, I narrowed down
the bisection window from late February to late May 2019. During this
period, the OpenWrt builds were using 4.14.x. I was able to build
using period-correct Ubuntu 18.04.6. After a number of bisection
iterations, I identified a kernel bump from 4.14.112 to 4.14.113 as
the commit that introduced the warm boot hang.
07aaa7e3d6
Looking at the upstream changes in the stable kernel between 4.14.112
and 4.14.113 (tig v4.14.112..v4.14.113), I spotted a likely suspect:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=20afb90f730982882e65b01fb8bdfe83914339c5
So, I tried reverting just that kernel change on top of the breaking
OpenWrt commit, and my warm boot hang went away.
Presumably, the warm boot hang is due to some register not getting
cleared in the same way that a loss of power does. That is
approximately as much as I understand about the problem.
More poking/prodding and coaching from Jonas Gorski, it looks
like this test patch fixes the problem on my board: Tested against
v6.6.67 and v4.14.113.
Fixes: 18fb053f9b ("x86/cpu/cyrix: Use correct macros for Cyrix calls on Geode processors")
Debugged-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/CAHP3WfOgs3Ms4Z+L9i0-iBOE21sdMk5erAiJurPjnrL9LSsgRA@mail.gmail.com
Cc: Matthew Whitehead <tedheadster@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
There are cases when it is useful to use both ACPI and DTB provided by
the bootloader, however in such cases we should make sure to prevent
conflicts between the two. Namely, don't try to use DTB for SMP setup
if ACPI is enabled.
Precisely, this prevents at least:
- incorrectly calling register_lapic_address(APIC_DEFAULT_PHYS_BASE)
after the LAPIC was already successfully enumerated via ACPI, causing
noisy kernel warnings and probably potential real issues as well
- failed IOAPIC setup in the case when IOAPIC is enumerated via mptable
instead of ACPI (e.g. with acpi=noirq), due to
mpparse_parse_smp_config() overridden by x86_dtb_parse_smp_config()
Signed-off-by: Dmytro Maluka <dmaluka@chromium.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250105172741.3476758-2-dmaluka@chromium.org
Problem: Currently when running the "make isoimage" command there is an
error related to wrong parameters passed to the cp command:
"cp: missing destination file operand after 'arch/x86/boot/isoimage/'"
This is caused because FDINITRDS is an empty array.
Solution: Check if FDINITRDS is empty before executing the "cp" command,
similar to how it is done in the case of hdimage.
Signed-off-by: Nir Lichtman <nir@lichtman.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Michal Marek <michal.lkml@markovi.net>
Link: https://lore.kernel.org/r/20250110120500.GA923218@lichtman.org
Construct __percpu_seg_override macro from __percpu_seg by
concatenating the later with __seg_ prefix to reduce ifdeffery.
No functional change intended.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250225200235.48007-1-ubizjak@gmail.com
The local variable length already holds the string length after calling
strncpy_from_user(). Using another local variable linlen and calling
strlen() is therefore unnecessary and can be removed. Remove linlen
and strlen() and use length instead.
No change in functionality intended.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250225131621.329699-2-thorsten.blum@linux.dev
Freqency mode is the current default mode of Linux perf. A period of 1 is
used as a starting period. The period is auto-adjusted on each tick or an
overflow, to meet the frequency target.
The start period of 1 is too low and may trigger some issues:
- Many HWs do not support period 1 well.
https://lore.kernel.org/lkml/875xs2oh69.ffs@tglx/
- For an event that occurs frequently, period 1 is too far away from the
real period. Lots of samples are generated at the beginning.
The distribution of samples may not be even.
- A low starting period for frequently occurring events also challenges
virtualization, which has a longer path to handle a PMI.
The limit_period value only checks the minimum acceptable value for HW.
It cannot be used to set the start period, because some events may
need a very low period. The limit_period cannot be set too high. It
doesn't help with the events that occur frequently.
It's hard to find a universal starting period for all events. The idea
implemented by this patch is to only give an estimate for the popular
HW and HW cache events. For the rest of the events, start from the lowest
possible recommended value.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250117151913.3043942-3-kan.liang@linux.intel.com
Pass XFD_ERR via KVM's exception payload mechanism when injecting an #NM
after interception so that XFD_ERR can be propagated to FRED's event_data
field without needing a dedicated field (which would need to be migrated).
For non-FRED vCPUs, this is a glorified NOP as
kvm_deliver_exception_payload() will simply do nothing (which is desirable
and correct).
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Tested-by: Shan Kang <shan.kang@intel.com>
Link: https://lore.kernel.org/r/20241001050110.3643764-15-xin@zytor.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Don't update the guest's XFD_ERR MSR if CR0.TS is set; per the SDM,
XFD_ERR is not modified if CR0.TS=1. Although it's not explicitly stated
in the SDM, conceptually it makes sense the CR0.TS check would be done
prior to the XFD_ERR check, e.g. CR0.TS=1 blocks all SIMD state, whereas
XFD blocks only XTILE state.
Device-not-available exceptions that are not due to XFD - those
resulting from setting CR0.TS to 1 - do not modify the IA32_XFD_ERR MSR.
Opportunistically update the comment to call out that XFD_ERR is updated
before the VM-Exit check occurs. Nothing in the SDM explicitly calls out
this behavior, but logically it must be the behavior, otherwise reading
XFD_ERR in handle_nm_fault_irqoff() would return stale data, i.e. the
to-be-delivered XFD_ERR value would need to be saved in EXIT_QUALIFICATION,
a la DR6 for #DB and CR2 for #PF, so that software could capture the guest
value.
Fixes: ec5be88ab2 ("kvm: x86: Intercept #NM for saving IA32_XFD_ERR")
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Tested-by: Shan Kang <shan.kang@intel.com>
Link: https://lore.kernel.org/r/20241001050110.3643764-3-xin@zytor.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Open code the filling of vcpu->arch.exception in kvm_requeue_exception()
instead of bouncing through kvm_multiple_exception(), as re-injection
doesn't actually share that much code with "normal" injection, e.g. the
VM-Exit interception check, payload delivery, and nested exception code
is all bypassed as those flows only apply during initial injection.
When FRED comes along, the special casing will only get worse, as FRED
explicitly tracks nested exceptions and essentially delivers the payload
on the stack frame, i.e. re-injection will need more inputs, and normal
injection will have yet more code that needs to be bypassed when KVM is
re-injecting an exception.
No functional change intended.
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Tested-by: Shan Kang <shan.kang@intel.com>
Link: https://lore.kernel.org/r/20241001050110.3643764-2-xin@zytor.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Rename send_user_only to avoid "user", because KVM's ABI is to not inject
page faults into CPL0, whereas "user" in x86 is specifically CPL3. Invert
the polarity to keep the naming simple and unambiguous. E.g. while KVM
often refers to CPL0 as "kernel", that terminology isn't ubiquitous, and
"send_kernel" could be misconstrued as "send only to kernel".
Link: https://lore.kernel.org/r/20250215010609.1199982-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Don't inject PV async #PFs into guests with protected register state, i.e.
SEV-ES and SEV-SNP guests, unless the guest has opted-in to receiving #PFs
at CPL0. For protected guests, the actual CPL of the guest is unknown.
Note, no sane CoCo guest should enable PV async #PF, but the current state
of Linux-as-a-CoCo-guest isn't entirely sane.
Fixes: add5e2f045 ("KVM: SVM: Add support for the SEV-ES VMSA")
Link: https://lore.kernel.org/r/20250215010609.1199982-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
The Xen emulation in KVM modifies certain CPUID leaves to expose
TSC information to the guest.
Previously, these CPUID leaves were updated whenever guest time changed,
but this conflicts with KVM_SET_CPUID/KVM_SET_CPUID2 ioctls which reject
changes to CPUID entries on running vCPUs.
Fix this by updating the TSC information directly in the CPUID emulation
handler instead of modifying the vCPU's CPUID entries.
Signed-off-by: Fred Griffoul <fgriffo@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Link: https://lore.kernel.org/r/20250124150539.69975-1-fgriffo@amazon.co.uk
Signed-off-by: Sean Christopherson <seanjc@google.com>
Perf doesn't work at low frequencies:
$ perf record -e cpu_core/instructions/ppp -F 120
Error:
The sys_perf_event_open() syscall returned with 22 (Invalid argument)
for event (cpu_core/instructions/ppp).
"dmesg | grep -i perf" may provide additional information.
The limit_period() check avoids a low sampling period on a counter. It
doesn't intend to limit the frequency.
The check in the x86_pmu_hw_config() should be limited to non-freq mode.
The attr.sample_period and attr.sample_freq are union. The
attr.sample_period should not be used to indicate the frequency mode.
Fixes: c46e665f03 ("perf/x86: Add INST_RETIRED.ALL workarounds")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250117151913.3043942-1-kan.liang@linux.intel.com
Closes: https://lore.kernel.org/lkml/20250115154949.3147-1-ravi.bangoria@amd.com/
Depending on the type of panics, it was found that the
__register_nmi_handler() function can be called in NMI context from
nmi_shootdown_cpus() leading to a lockdep splat:
WARNING: inconsistent lock state
inconsistent {INITIAL USE} -> {IN-NMI} usage.
lock(&nmi_desc[0].lock);
<Interrupt>
lock(&nmi_desc[0].lock);
Call Trace:
_raw_spin_lock_irqsave
__register_nmi_handler
nmi_shootdown_cpus
kdump_nmi_shootdown_cpus
native_machine_crash_shutdown
__crash_kexec
In this particular case, the following panic message was printed before:
Kernel panic - not syncing: Fatal hardware error!
This message seemed to be given out from __ghes_panic() running in
NMI context.
The __register_nmi_handler() function which takes the nmi_desc lock
with irq disabled shouldn't be called from NMI context as this can
lead to deadlock.
The nmi_shootdown_cpus() function can only be invoked once. After the
first invocation, all other CPUs should be stuck in the newly added
crash_nmi_callback() and cannot respond to a second NMI.
Fix it by adding a new emergency NMI handler to the nmi_desc
structure and provide a new set_emergency_nmi_handler() helper to set
crash_nmi_callback() in any context. The new emergency handler will
preempt other handlers in the linked list. That will eliminate the need
to take any lock and serve the panic in NMI use case.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20250206191844.131700-1-longman@redhat.com
Unify __pcpu_op1_N() and __pcpu_op2_N() macros to __pcpu_op_N()
by applying the macro only to asm mnemonic, not to the mnemonic
plus its arguments.
No functional change intended.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250224071648.15913-1-ubizjak@gmail.com
When emulating an instruction on behalf of L2 that L1 wants to intercept,
generate a nested VM-Exit instead of injecting a #UD into L2. Now that
(most of) the necessary information is available, synthesizing a VM-Exit
isn't terribly difficult.
Punt on decoding the ModR/M for descriptor table exits for now. There is
no evidence that any hypervisor intercepts descriptor table accesses *and*
uses the EXIT_QUALIFICATION to expedite emulation, i.e. it's not worth
delaying basic support for.
To avoid doing more harm than good, e.g. by putting L2 into an infinite
or effectively corrupting its code stream, inject #UD if the instruction
length is nonsensical.
Link: https://lore.kernel.org/r/20250201015518.689704-11-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Rework the nested VM-Exit helper to take the instruction length as a
parameter, and convert nested_vmx_vmexit() into a "default" wrapper that
grabs the length from vmcs02 as appropriate. This will allow KVM to set
the correct instruction length when synthesizing a nested VM-Exit when
emulating an instruction that L1 wants to intercept.
No functional change intended, as the path to prepare_vmcs12()'s reading
of vmcs02.VM_EXIT_INSTRUCTION_LEN is gated on the same set of conditions
as the VMREAD in the new nested_vmx_vmexit().
Link: https://lore.kernel.org/r/20250201015518.689704-10-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a #define to capture x86's architecturally defined max instruction
length instead of open coding the literal in a variety of places.
No functional change intended.
Link: https://lore.kernel.org/r/20250201015518.689704-9-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
When checking for intercept when emulating an instruction on behalf of L2,
pass the emulator's view of the RIP of the instruction being emulated to
vendor code. Unlike SVM, which communicates the next RIP on VM-Exit,
VMX communicates the length of the instruction that generated the VM-Exit,
i.e. requires the current and next RIPs.
Note, unless userspace modifies RIP during a userspace exit that requires
completion, kvm_rip_read() will contain the same information. Pass the
emulator's view largely out of a paranoia, and because there is no
meaningful cost in doing so.
Link: https://lore.kernel.org/r/20250201015518.689704-8-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
When checking for intercept when emulating an instruction on behalf of L2,
forward the source and destination operand types to vendor code so that
VMX can synthesize the correct EXIT_QUALIFICATION for port I/O VM-Exits.
Link: https://lore.kernel.org/r/20250201015518.689704-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Refactor the handling of port I/O interception checks when emulating on
behalf of L2 in anticipation of synthesizing a nested VM-Exit to L1
instead of injecting a #UD into L2.
No functional change intended.
Link: https://lore.kernel.org/r/20250201015518.689704-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Extend VMX's nested intercept logic for emulated instructions to handle
HLT interception, primarily for testing purposes. Failure to allow
emulation of HLT isn't all that interesting, as emulating HLT while L2 is
active either requires forced emulation (and no #UD intercept in L1), TLB
games in the guest to coerce KVM into emulating the wrong instruction, or
a bug elsewhere in KVM.
E.g. without commit 47ef3ef843 ("KVM: VMX: Handle event vectoring
error in check_emulate_instruction()"), KVM can end up trying to emulate
HLT if RIP happens to point at a HLT when a vectored event arrives with
L2's IDT pointing at emulated MMIO.
Note, vmx_check_intercept() is still broken when L1 wants to intercept an
instruction, as KVM injects a #UD instead of synthesizing a nested VM-Exit.
That issue extends far beyond HLT, punt on it for now.
Link: https://lore.kernel.org/r/20250201015518.689704-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Return X86EMUL_CONTINUE instead X86EMUL_UNHANDLEABLE when emulating RDPID
on behalf of L2 and L1 _does_ expose RDPID/RDTSCP to L2. When RDPID
emulation was added by commit fb6d4d340e ("KVM: x86: emulate RDPID"),
KVM incorrectly allowed emulation by default. Commit 07721feee4 ("KVM:
nVMX: Don't emulate instructions in guest mode") fixed that flaw, but
missed that RDPID emulation was relying on the common return path to allow
emulation on behalf of L2.
Fixes: 07721feee4 ("KVM: nVMX: Don't emulate instructions in guest mode")
Link: https://lore.kernel.org/r/20250201015518.689704-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Set "next_rip" in the emulation interception info passed to vendor code
using the emulator context's "_eip", not "eip". "eip" holds RIP from the
start of emulation, i.e. the RIP of the instruction that's being emulated,
whereas _eip tracks the context's current position in decoding the code
stream, which at the time of the intercept checks is effectively the RIP
of the next instruction.
Passing the current RIP as next_rip causes SVM to stuff the wrong value
value into vmcb12->control.next_rip if a nested VM-Exit is generated, i.e.
if L1 wants to intercept the instruction, and could result in L1 putting
L2 into an infinite loop due to restarting L2 with the same RIP over and
over.
Fixes: 8a76d7f25f ("KVM: x86: Add x86 callback for intercept check")
Link: https://lore.kernel.org/r/20250201015518.689704-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
When emulating PAUSE on behalf of L2, check for interception in vmcs12 by
looking at primary execution controls, not secondary execution controls.
Checking for PAUSE_EXITING in secondary execution controls effectively
results in KVM looking for BUS_LOCK_DETECTION, which KVM doesn't expose to
L1, i.e. is always off in vmcs12, and ultimately results in KVM failing to
"intercept" PAUSE.
Because KVM doesn't handle interception during emulation correctly on VMX,
i.e. the "fixed" code is still quite broken, and not intercepting PAUSE is
relatively benign, for all intents and purposes the bug means that L2 gets
to live when it would otherwise get an unexpected #UD.
Fixes: 4984563823 ("KVM: nVMX: Emulate NOPs in L2, and PAUSE if it's not intercepted")
Link: https://lore.kernel.org/r/20250201015518.689704-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Now that all KVM usage of the Xen HVM config information is buried behind
CONFIG_KVM_XEN=y, move the per-VM kvm_xen_hvm_config field out of kvm_arch
and into kvm_xen.
No functional change intended.
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Link: https://lore.kernel.org/r/20250215011437.1203084-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Now that all references to kvm_vcpu_arch.xen_hvm_config are wrapped with
CONFIG_KVM_XEN #ifdefs, bury the field itself behind CONFIG_KVM_XEN=y.
No functional change intended.
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Link: https://lore.kernel.org/r/20250215011437.1203084-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Query kvm_xen_enabled when detecting writes to the Xen hypercall page MSR
so that the check is optimized away in the likely scenario that Xen isn't
enabled for the VM.
Deliberately open code the check instead of using kvm_xen_msr_enabled() in
order to avoid a double load of xen_hvm_config.msr (which is admittedly
rather pointless given the widespread lack of READ_ONCE() usage on the
plethora of vCPU-scoped accesses to kvm->arch.xen state).
No functional change intended.
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Link: https://lore.kernel.org/r/20250215011437.1203084-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a helper to detect writes to the Xen hypercall page MSR, and provide a
stub for CONFIG_KVM_XEN=n to optimize out the check for kernels built
without Xen support.
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Link: https://lore.kernel.org/r/20250215011437.1203084-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reject userspace attempts to set the Xen hypercall page MSR to an index
outside of the "standard" virtualization range [0x40000000, 0x4fffffff],
as KVM is not equipped to handle collisions with real MSRs, e.g. KVM
doesn't update MSR interception, conflicts with VMCS/VMCB fields, special
case writes in KVM, etc.
While the MSR index isn't strictly ABI, i.e. can theoretically float to
any value, in practice no known VMM sets the MSR index to anything other
than 0x40000000 or 0x40000200.
Cc: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Link: https://lore.kernel.org/r/20250215011437.1203084-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use @addr instead of @vaddr in the kernel-doc comment for
clean_cache_range() to eliminate warnings:
arch/x86/lib/usercopy_64.c:29: warning: Function parameter or struct member 'addr' not described in 'clean_cache_range'
arch/x86/lib/usercopy_64.c:29: warning: Excess function parameter 'vaddr' description in 'clean_cache_range'
Fixes: 0aed55af88 ("x86, uaccess: introduce copy_from_iter_flushcache for pmem / cache-bypass operations")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20250111063333.911084-1-rdunlap@infradead.org
- Fix AVX-VNNI CPU feature dependency bug triggered via
the 'noxsave' boot option
- Fix typos in the SVA documentation
- Add Tony Luck as RDT co-maintainer and remove Fenghua Yu
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=CR8P
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2025-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
- Fix AVX-VNNI CPU feature dependency bug triggered via the 'noxsave'
boot option
- Fix typos in the SVA documentation
- Add Tony Luck as RDT co-maintainer and remove Fenghua Yu
* tag 'x86-urgent-2025-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
docs: arch/x86/sva: Fix two grammar errors under Background and FAQ
x86/cpufeatures: Make AVX-VNNI depend on AVX
MAINTAINERS: Change maintainer for RDT
Avoid unnecessary per-CPU memory allocation on unsupported CPUs,
this can save 12K memory for each CPU
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20250122074103.3091-1-lirongqing@baidu.com
Previously the e820_table_kexec[] was exported to sysfs since kexec-tools uses
the memmap entries to prepare the e820 table for the new kernel.
The following commit, ~8 years ago, introduced e820_table_firmware[] and changed
the behavior to export the firmware table instead:
12df216c61 ("x86/boot/e820: Introduce the bootloader provided e820_table_firmware[] table")
Originally the kexec_file_load and kexec_load syscalls both used e820_table_kexec[].
Since the sysfs exported entries are from e820_table_firmware[] people
now need to tune both tables for kexec.
Restore the old behavior so the kexec_load and kexec_file_load syscalls work with
only one table update. The e820_table_firmware[] is used by hibernation kernel
code and it works without the sysfs exporting. Also remove the SEV
e820_table_firmware[] updating code.
Also update the code comments here and drop the comments about setup_data
reservation since it is not needed any more after this change was made
a year ago:
fc7f27cda8 ("x86/kexec: Do not update E820 kexec table for setup_data")
[ mingo: Tidy up the changelog and comments. ]
Signed-off-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Ashish Kalra <ashish.kalra@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Baoquan He <bhe@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Link: https://lore.kernel.org/r/Z5jcb1GKhLvH8kDc@darkstar.users.ipa.redhat.com
The return values of some functions are of boolean type. Change the
type of these function to bool and adjust their return values.
No functional change intended.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250129154920.6773-1-ubizjak@gmail.com
When CONFIG_PCI_P2PDMA=y (which is basically enabled on all
large x86 distros), it maps the PFN's via a ZONE_DEVICE
mapping using devm_memremap_pages(). The mapped virtual
address range corresponds to the pci_resource_start()
of the BAR address and size corresponding to the BAR length.
When KASLR is enabled, the direct map range of the kernel is
reduced to the size of physical memory plus additional padding.
If the BAR address is beyond this limit, PCI peer to peer DMA
mappings fail.
Fix this by not shrinking the size of the direct map when
CONFIG_PCI_P2PDMA=y.
This reduces the total available entropy, but it's better than
the current work around of having to disable KASLR completely.
[ mingo: Clarified the changelog to point out the broad impact ... ]
Signed-off-by: Balbir Singh <balbirs@nvidia.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # drivers/pci/Kconfig
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/lkml/20250206023201.1481957-1-balbirs@nvidia.com/
Link: https://lore.kernel.org/r/20250206234234.1912585-1-balbirs@nvidia.com
--
arch/x86/mm/kaslr.c | 10 ++++++++--
drivers/pci/Kconfig | 6 ++++++
2 files changed, 14 insertions(+), 2 deletions(-)
Load patches for which the driver carries a SHA256 checksum of the patch
blob.
This can be disabled by adding "microcode.amd_sha_check=off" on the
kernel cmdline. But it is highly NOT recommended.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Rather than copying a request by hand with memcpy, use the correct
API helpers to setup the new request. This will matter once the
API helpers start setting up chained requests as a simple memcpy
will break chaining.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The HAVE_ARCH Kconfig options in lib/crypto try to solve the
modular versus built-in problem, but it still fails when the
the LIB option (e.g., CRYPTO_LIB_CURVE25519) is selected externally.
Fix this by introducing a level of indirection with ARCH_MAY_HAVE
Kconfig options, these then go on to select the ARCH_HAVE options
if the ARCH Kconfig options matches that of the LIB option.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501230223.ikroNDr1-lkp@intel.com/
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
As with the other AES modes I've implemented, I've received interest in
my AES-XTS assembly code being reused in other projects. Therefore,
change the license to Apache-2.0 OR BSD-2-Clause like what I used for
AES-GCM. Apache-2.0 is the license of OpenSSL and BoringSSL.
Note that it is difficult to *directly* share code between the kernel,
OpenSSL, and BoringSSL for various reasons such as perlasm vs. plain
asm, Windows ABI support, different divisions of responsibility between
C and asm in each project, etc. So whether that will happen instead of
just doing ports is still TBD. But this dual license should at least
make it possible to port changes between the projects.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Delete aes_ctrby8_avx-x86_64.S and add a new assembly file
aes-ctr-avx-x86_64.S which follows a similar approach to
aes-xts-avx-x86_64.S in that it uses a "template" to provide AESNI+AVX,
VAES+AVX2, VAES+AVX10/256, and VAES+AVX10/512 code, instead of just
AESNI+AVX. Wire it up to the crypto API accordingly.
This greatly improves the performance of AES-CTR and AES-XCTR on
VAES-capable CPUs, with the best case being AMD Zen 5 where an over 230%
increase in throughput is seen on long messages. Performance on
non-VAES-capable CPUs remains about the same, and the non-AVX AES-CTR
code (aesni_ctr_enc) is also kept as-is for now. There are some slight
regressions (less than 10%) on some short message lengths on some CPUs;
these are difficult to avoid, given how the previous code was so heavily
unrolled by message length, and they are not particularly important.
Detailed performance results are given in the tables below.
Both CTR and XCTR support is retained. The main loop remains
8-vector-wide, which differs from the 4-vector-wide main loops that are
used in the XTS and GCM code. A wider loop is appropriate for CTR and
XCTR since they have fewer other instructions (such as vpclmulqdq) to
interleave with the AES instructions.
Similar to what was the case for AES-GCM, the new assembly code also has
a much smaller binary size, as it fixes the excessive unrolling by data
length and key length present in the old code. Specifically, the new
assembly file compiles to about 9 KB of text vs. 28 KB for the old file.
This is despite 4x as many implementations being included.
The tables below show the detailed performance results. The tables show
percentage improvement in single-threaded throughput for repeated
encryption of the given message length; an increase from 6000 MB/s to
12000 MB/s would be listed as 100%. They were collected by directly
measuring the Linux crypto API performance using a custom kernel module.
The tested CPUs were all server processors from Google Compute Engine
except for Zen 5 which was a Ryzen 9 9950X desktop processor.
Table 1: AES-256-CTR throughput improvement,
CPU microarchitecture vs. message length in bytes:
| 16384 | 4096 | 4095 | 1420 | 512 | 500 |
---------------------+-------+-------+-------+-------+-------+-------+
AMD Zen 5 | 232% | 203% | 212% | 143% | 71% | 95% |
Intel Emerald Rapids | 116% | 116% | 117% | 91% | 78% | 79% |
Intel Ice Lake | 109% | 103% | 107% | 81% | 54% | 56% |
AMD Zen 4 | 109% | 91% | 100% | 70% | 43% | 59% |
AMD Zen 3 | 92% | 78% | 87% | 57% | 32% | 43% |
AMD Zen 2 | 9% | 8% | 14% | 12% | 8% | 21% |
Intel Skylake | 7% | 7% | 8% | 5% | 3% | 8% |
| 300 | 200 | 64 | 63 | 16 |
---------------------+-------+-------+-------+-------+-------+
AMD Zen 5 | 57% | 39% | -9% | 7% | -7% |
Intel Emerald Rapids | 37% | 42% | -0% | 13% | -8% |
Intel Ice Lake | 39% | 30% | -1% | 14% | -9% |
AMD Zen 4 | 42% | 38% | -0% | 18% | -3% |
AMD Zen 3 | 38% | 35% | 6% | 31% | 5% |
AMD Zen 2 | 24% | 23% | 5% | 30% | 3% |
Intel Skylake | 9% | 1% | -4% | 10% | -7% |
Table 2: AES-256-XCTR throughput improvement,
CPU microarchitecture vs. message length in bytes:
| 16384 | 4096 | 4095 | 1420 | 512 | 500 |
---------------------+-------+-------+-------+-------+-------+-------+
AMD Zen 5 | 240% | 201% | 216% | 151% | 75% | 108% |
Intel Emerald Rapids | 100% | 99% | 102% | 91% | 94% | 104% |
Intel Ice Lake | 93% | 89% | 92% | 74% | 50% | 64% |
AMD Zen 4 | 86% | 75% | 83% | 60% | 41% | 52% |
AMD Zen 3 | 73% | 63% | 69% | 45% | 21% | 33% |
AMD Zen 2 | -2% | -2% | 2% | 3% | -1% | 11% |
Intel Skylake | -1% | -1% | 1% | 2% | -1% | 9% |
| 300 | 200 | 64 | 63 | 16 |
---------------------+-------+-------+-------+-------+-------+
AMD Zen 5 | 78% | 56% | -4% | 38% | -2% |
Intel Emerald Rapids | 61% | 55% | 4% | 32% | -5% |
Intel Ice Lake | 57% | 42% | 3% | 44% | -4% |
AMD Zen 4 | 35% | 28% | -1% | 17% | -3% |
AMD Zen 3 | 26% | 23% | -3% | 11% | -6% |
AMD Zen 2 | 13% | 24% | -1% | 14% | -3% |
Intel Skylake | 16% | 8% | -4% | 35% | -3% |
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Introduce hv_curr_partition_type to store the partition type
as an enum.
Right now this is limited to guest or root partition, but there will
be other kinds in future and the enum is easily extensible.
Set up hv_curr_partition_type early in Hyper-V initialization with
hv_identify_partition_type(). hv_root_partition() just queries this
value, and shouldn't be called before that.
Making this check into a function sets the stage for adding a config
option to gate the compilation of root partition code. In particular,
hv_root_partition() can be stubbed out always be false if root
partition support isn't desired.
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/1740167795-13296-3-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1740167795-13296-3-git-send-email-nunodasneves@linux.microsoft.com>
process_64.c is not built on native 32-bit, so CONFIG_X86_32 will never
be set.
No change in functionality intended.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lore.kernel.org/r/20250202202323.422113-3-brgerst@gmail.com
Use in_ia32_syscall() instead of a compat syscall entry.
No change in functionality intended.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lore.kernel.org/r/20250202202323.422113-2-brgerst@gmail.com
The EFI mixed mode code has been decoupled from the legacy decompressor,
in order to be able to reuse it with generic EFI zboot images for x86.
Move the source file into the libstub source directory to facilitate
this.
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Now that the GDT/IDT and data segment selector preserve/restore logic
has been removed from the boot-time EFI mixed mode thunking routines,
the remaining logic to handle the function arguments can be simplified:
the setup of the arguments on the stack can be moved into the 32-bit
callee, which is able to use a more idiomatic sequence of PUSH
instructions.
This, in turn, allows the far call and far return to be issued using
plain LCALL and LRET instructions, removing the need to set up the
return explicitly.
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The EFI mixed mode startup code calls into startup_32 in the legacy
decompressor with a mocked up boot_params struct, only to get it to set
up the 1:1 mapping of the lower 4 GiB of memory and switch to a GDT that
supports 64-bit mode.
In order to be able to reuse the EFI mixed mode startup code in EFI
zboot images, which do not incorporate the legacy decompressor code,
decouple it, by dealing with the GDT and IDT directly.
Doing so makes it possible to construct a GDT that is compatible with
the one the firmware uses, with one additional entry for a 64-bit mode
code segment appended. This removes the need entirely to switch between
GDTs and IDTs or data segment selector values and all of this code can
be removed.
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
In preparation for dropping the dependency on startup_32 entirely in the
next patch, add the code that sets up the 1:1 mapping of the lower 4 GiB
of system RAM to the mixed mode stub.
The reload of CR3 after the long mode switch will be removed in a
subsequent patch, when it is no longer needed.
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Remove hard-coded strings by using the str_disabled_enabled() helper.
No change in functionality intended.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250209210333.5666-2-thorsten.blum@linux.dev
Entering long mode involves setting the EFER_LME and CR4.PAE bits before
enabling paging by setting CR0.PG bit.
It also involves disabling interrupts, given that the firmware's 32-bit
IDT becomes invalid as soon as the CPU transitions into long mode.
Reloading the CR3 register is not necessary at boot time, given that the
EFI firmware as well as the kernel's EFI stub use a 1:1 mapping of the
32-bit addressable memory in the system.
Break out this code into a separate helper for clarity, and so that it
can be reused in a subsequent patch.
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
In order for the EFI mixed mode startup code to be reusable in a context
where the legacy decompressor is not used, replace the call to
verify_cpu() [which performs an elaborate set of checks] with a simple
check against the 'long mode' bit in the appropriate CPUID leaf.
This is reasonable, given that EFI support is implied when booting in
this manner, and so there is no need to consider very old CPUs when
performing this check.
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The difference between the PE and handover entrypoints in the EFI stub
is that the former allocates a struct boot_params whereas the latter
expects one from the caller. Currently, these are two completely
separate entrypoints, duplicating some logic and both relying of
efi_exit() to return straight back to the firmware on an error.
Simplify this by making the PE entrypoint call the handover entrypoint
with NULL as the argument for the struct boot_params parameter. This
makes the code easier to follow, and removes the need to support two
different calling conventions in the mixed mode asm code.
While at it, move the assignment of boot_params_ptr into the function
that actually calls into the legacy decompressor, which is where its
value is required.
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The header clearly states that it does not want to be included directly,
only via <linux/(platform_)?device.h>. Which is already present, so
delete the superfluous include.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250210113453.51825-2-wsa+renesas@sang-engineering.com
The within_inclusive() function, in some cases, when CONFIG_X86_64=n,
may be not used.
This, in particular, prevents kernel builds with Clang, `make W=1`
and CONFIG_WERROR=y:
arch/x86/mm/pat/set_memory.c:215:1: error: unused function 'within_inclusive' [-Werror,-Wunused-function]
Fix this by guarding the definitions with the respective ifdeffery.
See also:
6863f5643d ("kbuild: allow Clang to find unused static inline functions for W=1 build")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250211145721.1620552-1-andriy.shevchenko@linux.intel.com
Every pv_ops.mmu.tlb_remove_table call ends up calling tlb_remove_table.
Get rid of the indirection by simply calling tlb_remove_table directly,
and not going through the paravirt function pointers.
Suggested-by: Qi Zheng <zhengqi.arch@bytedance.com>
Signed-off-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Manali Shukla <Manali.Shukla@amd.com>
Tested-by: Brendan Jackman <jackmanb@google.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/20250213161423.449435-3-riel@surriel.com
Currently x86 uses CONFIG_MMU_GATHER_TABLE_FREE when using
paravirt, and not when running on bare metal.
There is no real good reason to do things differently for
each setup. Make them all the same.
Currently get_user_pages_fast synchronizes against page table
freeing in two different ways:
- on bare metal, by blocking IRQs, which block TLB flush IPIs
- on paravirt, with MMU_GATHER_RCU_TABLE_FREE
This is done because some paravirt TLB flush implementations
handle the TLB flush in the hypervisor, and will do the flush
even when the target CPU has interrupts disabled.
Always handle page table freeing with MMU_GATHER_RCU_TABLE_FREE.
Using RCU synchronization between page table freeing and get_user_pages_fast()
allows bare metal to also do TLB flushing while interrupts are disabled.
Various places in the mm do still block IRQs or disable preemption
as an implicit way to block RCU frees.
That makes it safe to use INVLPGB on AMD CPUs.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Manali Shukla <Manali.Shukla@amd.com>
Tested-by: Brendan Jackman <jackmanb@google.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/20250213161423.449435-2-riel@surriel.com
E820_TYPE_RESERVED_KERN is a relict from the ancient history that was used
to early reserve setup_data, see:
28bb223795 ("x86: move reserve_setup_data to setup.c")
Nowadays setup_data is anyway reserved in memblock and there is no point in
carrying E820_TYPE_RESERVED_KERN that behaves exactly like E820_TYPE_RAM
but only complicates the code.
A bonus for removing E820_TYPE_RESERVED_KERN is a small but measurable
speedup of 20 microseconds in init_mem_mappings() on a VM with 32GB or RAM.
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20250214090651.3331663-5-rppt@kernel.org
Changing memblock parameters, namely bottom_up and allocation upper
limit does not have any effect before memblock initialization in
e820__memblock_setup().
Move the calls to memblock_set_bottom_up() and memblock_set_current_limit()
to e820__memblock_setup() to group all the memblock initial setup and make
setup_arch() more readable.
No functional changes.
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250214090651.3331663-2-rppt@kernel.org
According to:
https://gcc.gnu.org/onlinedocs/gcc/Size-of-an-asm.html
the usage of asm pseudo directives in the asm template can confuse
the compiler to wrongly estimate the size of the generated
code.
The ALTERNATIVE macro expands to several asm pseudo directives,
so its usage in {,try_}cmpxchg{64,128} causes instruction length estimate
to fail by an order of magnitude (the specially instrumented compiler
reports the estimated length of these asm templates to be more than 20
instructions long).
This incorrect estimate further causes unoptimal inlining
decisions, unoptimal instruction scheduling and unoptimal code block
alignments for functions that use these locking primitives.
Use asm_inline instead:
https://gcc.gnu.org/pipermail/gcc-patches/2018-December/512349.html
which is a feature that makes GCC pretend some inline assembler code
is tiny (while it would think it is huge), instead of just asm.
For code size estimation, the size of the asm is then taken as
the minimum size of one instruction, ignoring how many instructions
compiler thinks it is.
The effect of this patch on x86_64 target is minor, since 128-bit
functions are rarely used on this target. The code size of the resulting
defconfig object file stays the same:
text data bss dec hex filename
27456612 4638523 814148 32909283 1f627e3 vmlinux-old.o
27456612 4638523 814148 32909283 1f627e3 vmlinux-new.o
but the patch has minor effect on code layout due to the different
scheduling decisions in functions containing changed macros.
There is no effect on the x64_32 target, the code size of the resulting
defconfig object file and the code layout stays the same:
text data bss dec hex filename
18883870 2679275 1707916 23271061 1631695 vmlinux-old.o
18883870 2679275 1707916 23271061 1631695 vmlinux-new.o
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250214150929.5780-2-ubizjak@gmail.com
percpu_{,try_}cmpxchg{64,128}() macros use CALL instruction inside
asm statement in one of their alternatives. Use ALT_OUTPUT_SP()
macro to add required dependence on %esp register.
ALT_OUTPUT_SP() implements the above dependence by adding
ASM_CALL_CONSTRAINT to its arguments. This constraint should be used
for any inline asm which has a CALL instruction, otherwise the
compiler may schedule the asm before the frame pointer gets set up
by the containing function, causing objtool to print a "call without
frame pointer save/setup" warning.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250214150929.5780-1-ubizjak@gmail.com
Rather than manually bounding gap between gap_min and gap_max,
use the well-known clamp() macro to make the code easier to read.
Signed-off-by: Qasim Ijaz <qasdev00@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250215125249.10729-1-qasdev00@gmail.com
TSC could be reset in deep ACPI sleep states, even with invariant TSC.
That's the reason we have sched_clock() save/restore functions, to deal
with this situation. But what happens is that such functions are guarded
with a check for the stability of sched_clock - if not considered stable,
the save/restore routines aren't executed.
On top of that, we have a clear comment in native_sched_clock() saying
that *even* with TSC unstable, we continue using TSC for sched_clock due
to its speed.
In other words, if we have a situation of TSC getting detected as unstable,
it marks the sched_clock as unstable as well, so subsequent S3 sleep cycles
could bring bogus sched_clock values due to the lack of the save/restore
mechanism, causing warnings like this:
[22.954918] ------------[ cut here ]------------
[22.954923] Delta way too big! 18446743750843854390 ts=18446744072977390405 before=322133536015 after=322133536015 write stamp=18446744072977390405
[22.954923] If you just came from a suspend/resume,
[22.954923] please switch to the trace global clock:
[22.954923] echo global > /sys/kernel/tracing/trace_clock
[22.954923] or add trace_clock=global to the kernel command line
[22.954937] WARNING: CPU: 2 PID: 5728 at kernel/trace/ring_buffer.c:2890 rb_add_timestamp+0x193/0x1c0
Notice that the above was reproduced even with "trace_clock=global".
The fix for that is to _always_ save/restore the sched_clock on suspend
cycle _if TSC is used_ as sched_clock - only if we fallback to jiffies
the sched_clock_stable() check becomes relevant to save/restore the
sched_clock.
Debugged-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250215210314.351480-1-gpiccoli@igalia.com
The kernel test robot reported the following build error:
>> ERROR: modpost: "acpi_processor_ffh_play_dead" [drivers/acpi/processor.ko] undefined!
Caused by this recently merged commit:
541ddf31e3 ("ACPI/processor_idle: Add FFH state handling")
The build failure is due to an oversight in the 'CONFIG_ACPI_PROCESSOR=m' case,
the function export is missing. Add it.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202502151207.FA9UO1iX-lkp@intel.com/
Fixes: 541ddf31e3 ("ACPI/processor_idle: Add FFH state handling")
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/de5bf4f116779efde315782a15146fdc77a4a044.camel@linux.intel.com
Currently memremap(MEMREMAP_WB) can produce decrypted/shared mapping:
memremap(MEMREMAP_WB)
arch_memremap_wb()
ioremap_cache()
__ioremap_caller(.encrytped = false)
In such cases, the IORES_MAP_ENCRYPTED flag on the memory will determine
if the resulting mapping is encrypted or decrypted.
Creating a decrypted mapping without explicit request from the caller is
risky:
- It can inadvertently expose the guest's data and compromise the
guest.
- Accessing private memory via shared/decrypted mapping on TDX will
either trigger implicit conversion to shared or #VE (depending on
VMM implementation).
Implicit conversion is destructive: subsequent access to the same
memory via private mapping will trigger a hard-to-debug #VE crash.
The kernel already provides a way to request decrypted mapping
explicitly via the MEMREMAP_DEC flag.
Modify memremap(MEMREMAP_WB) to produce encrypted/private mapping by
default unless MEMREMAP_DEC is specified or if the kernel runs on
a machine with SME enabled.
It fixes the crash due to #VE on kexec in TDX guests if CONFIG_EISA is
enabled.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/20250217163822.343400-3-kirill.shutemov@linux.intel.com
Ongoing work on an optimization to batch-preallocate vCPU state buffers
for KVM revealed a mismatch between the allocation sizes used in
fpu_alloc_guest_fpstate() and fpstate_realloc(). While the former
allocates a buffer sized to fit the default set of XSAVE features
in UABI form (as per fpu_user_cfg), the latter uses its ksize argument
derived (for the requested set of features) in the same way as the sizes
found in fpu_kernel_cfg, i.e. using the compacted in-kernel
representation.
The correct size to use for guest FPU state should indeed be the
kernel one as seen in fpstate_realloc(). The original issue likely
went unnoticed through a combination of UABI size typically being
larger than or equal to kernel size, and/or both amounting to the
same number of allocated 4K pages.
Fixes: 69f6ed1d14 ("x86/fpu: Provide infrastructure for KVM FPU cleanup")
Signed-off-by: Stanislav Spassov <stanspas@amazon.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250218141045.85201-1-stanspas@amazon.de
The "calls" pointer can no longer be NULL after the following
commit:
ab9fea5948 ("x86/alternative: Simplify callthunk patching")
Delete this unnecessary check.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/fcbb2f57-0714-4139-b441-8817365c16a1@stanley.mountain
The 'noxsave' boot option disables support for AVX, but support for the
AVX-VNNI feature was still declared on CPUs that support it. Fix this.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/20250220060124.89622-1-ebiggers@kernel.org
The values are not used anymore.
Also the sanity checks performed by vdso2c can never trigger as they
only validate invariants already enforced by the linker script.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250204-vdso-store-rng-v3-16-13a4669dfc8c@linutronix.de
The generic storage implementation provides the same features as the
custom one. However it can be shared between architectures, making
maintenance easier.
This switch also moves the random state data out of the time data page.
The currently used hardcoded __VDSO_RND_DATA_OFFSET does not take into
account changes to the time data page layout.
Co-developed-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250204-vdso-store-rng-v3-15-13a4669dfc8c@linutronix.de
As the Makefile is included into other Makefiles it can not be used to
define objects to be built from the current source directory.
However the generic datastore will introduce such a local source file.
Rename the included Makefile so it is clear how it is to be used and to
make room for a regular Makefile in lib/vdso/.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250204-vdso-store-rng-v3-4-13a4669dfc8c@linutronix.de
The vclock pages are *after* the non-vclock pages. Currently there are both
two vclock and two non-vclock pages so the existing logic works by
accident. As soon as the number of pages changes it will break however.
This will be the case with the introduction of the generic vDSO data
storage.
Use a macro to keep the calculation understandable and in sync between
the linker script and mapping code.
Fixes: e93d2521b2 ("x86/vdso: Split virtual clock pages into dedicated mapping")
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250204-vdso-store-rng-v3-1-13a4669dfc8c@linutronix.de
According to the latest event list, update the event constraint tables
for Lion Cove core.
The general rule (the event codes < 0x90 are restricted to counters
0-3.) has been removed. There is no restriction for most of the
performance monitoring events.
Fixes: a932aa0e86 ("perf/x86: Add Lunar Lake and Arrow Lake support")
Reported-by: Amiri Khalil <amiri.khalil@intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20250219141005.2446823-1-kan.liang@linux.intel.com
CONFIG_GENERIC_PENDING_IRQ requires an architecture specific implementation
of irq_force_complete_move() for CPU hotplug. At the moment, only x86
implements this unconditionally, but for RISC-V irq_force_complete_move()
is only needed when the RISC-V IMSIC driver is in use and not needed
otherwise.
To allow runtime configuration of this mechanism, introduce a common
irq_force_complete_move() implementation in the interrupt core code, which
only invokes the completion function, when a interrupt chip in the
hierarchy implements it.
Switch X86 over to the new mechanism. No functional change intended.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250217085657.789309-5-apatel@ventanamicro.com
The assembly functions generated by crc-pclmul-template.S are called
only via static_call, so they do not need to begin with an endbr
instruction. But objtool still warns about a missing endbr by default.
Add ANNOTATE_NOENDBR to suppress these warnings:
vmlinux.o: warning: objtool: crc32_x86_init+0x1c0: relocation to !ENDBR: crc32_lsb_vpclmul_avx10_256+0x0
vmlinux.o: warning: objtool: crc64_x86_init+0x183: relocation to !ENDBR: crc64_msb_vpclmul_avx10_256+0x0
vmlinux.o: warning: objtool: crc_t10dif_x86_init+0x183: relocation to !ENDBR: crc16_msb_vpclmul_avx10_256+0x0
vmlinux.o: warning: objtool: __SCK__crc32_lsb_pclmul+0x0: data relocation to !ENDBR: crc32_lsb_pclmul_sse+0x0
vmlinux.o: warning: objtool: __SCK__crc64_lsb_pclmul+0x0: data relocation to !ENDBR: crc64_lsb_pclmul_sse+0x0
vmlinux.o: warning: objtool: __SCK__crc64_msb_pclmul+0x0: data relocation to !ENDBR: crc64_msb_pclmul_sse+0x0
vmlinux.o: warning: objtool: __SCK__crc16_msb_pclmul+0x0: data relocation to !ENDBR: crc16_msb_pclmul_sse+0x0
Fixes: 8d2d3e72e3 ("x86/crc: add "template" for [V]PCLMULQDQ based CRC functions")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/r/20250217170555.3d14df62@canb.auug.org.au/
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250217193230.100443-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Some minimial kernel configurations will fail with -Werror=implicit-function-declaration
due to a missing header include.
Add that header.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20250211203314.762755-1-superm1@kernel.org
[ rjw: Subject edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Move the following sysctl tables into arch/x86/kernel/setup.c:
panic_on_{unrecoverable_nmi,io_nmi}
bootloader_{type,version}
io_delay_type
unknown_nmi_panic
acpi_realmode_flags
Variables moved from include/linux/ to arch/x86/include/asm/ because there
is no longer need for them outside arch/x86/kernel:
acpi_realmode_flags
panic_on_{unrecoverable_nmi,io_nmi}
Include <asm/nmi.h> in arch/s86/kernel/setup.h in order to bring in
panic_on_{io_nmi,unrecovered_nmi}.
This is part of a greater effort to move ctl tables into their
respective subsystems which will reduce the merge conflicts in
kerenel/sysctl.c.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250218-jag-mv_ctltables-v1-8-cd3698ab8d29@kernel.org
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmeyYIQeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGNy0H/jWdgjddRaEHQ1RB
e18Oi6MJcTQikHbCHKGZGlyxR4dYxdAONuMmWwgt+266K8qUJSZcNXePwqGEWjx2
qkJ9Tu0Agr8KkfVDtGHGXyd4tuZRpx9Fco6+jKkKiMjjtif7nrUajUGGwRsqGoib
YYzrhbjNZDl17/J58O1E4YZs3w7Lu26PwDR58RZMsSG0pygAfU2fogKcYmi1pTYV
w86icn0LlO8b5Y7fsrY56rLrawnI1RGlxfylUTHzo4QkoIUGvQLB8c6XPMYsVf9R
lvkphu+/fGVnSw577WlVy8DTBso+Pj2nWw4jUTiEAy9hYY6zMxrqrX3XowAwbxj1
m6zP+F8=
=ieVA
-----END PGP SIGNATURE-----
Merge tag 'v6.14-rc3' into x86/core, to pick up fixes
Pick up upstream x86 fixes before applying new patches.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.
Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.
Patch was created by using Coccinelle.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/e84ad5a660b8e10867e547db8e64f7e99c48ebba.1738746821.git.namcao@linutronix.de
hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.
Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.
Patch was created by using Coccinelle.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/all/5051cfe7ed48ef9913bf2583eeca6795cb53d6ae.1738746821.git.namcao@linutronix.de
Now that the load and link addresses of percpu variables are the same,
these macros are no longer necessary.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250123190747.745588-12-brgerst@gmail.com
Inverse relocations were needed to offset the effects of relocation for
RIP-relative accesses to zero-based percpu data. Now that the percpu
section is linked normally as part of the kernel image, they are no
longer needed.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250123190747.745588-11-brgerst@gmail.com
Now that the stack protector canary value is a normal percpu variable,
fixed_percpu_data is unused and can be removed.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250123190747.745588-10-brgerst@gmail.com
The percpu section is currently linked at absolute address 0, because
older compilers hard-coded the stack protector canary value at a fixed
offset from the start of the GS segment. Now that the canary is a
normal percpu variable, the percpu section does not need to be linked
at a specific address.
x86-64 will now calculate the percpu offsets as the delta between the
initial percpu address and the dynamically allocated memory, like other
architectures. Note that GSBASE is limited to the canonical address
width (48 or 57 bits, sign-extended). As long as the kernel text,
modules, and the dynamically allocated percpu memory are all in the
negative address space, the delta will not overflow this limit.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250123190747.745588-9-brgerst@gmail.com
Older versions of GCC fixed the location of the stack protector canary
at %gs:40. This constraint forced the percpu section to be linked at
absolute address 0 so that the canary could be the first data object in
the percpu section. Supporting the zero-based percpu section requires
additional code to handle relocations for RIP-relative references to
percpu data, extra complexity to kallsyms, and workarounds for linker
bugs due to the use of absolute symbols.
GCC 8.1 supports redefining where the canary is located, allowing it to
become a normal percpu variable instead of at a fixed location. This
removes the constraint that the percpu section must be zero-based.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250123190747.745588-8-brgerst@gmail.com
Clang versions before 17 will not honour -fdirect-access-external-data
for the load of the stack cookie emitted into each function's prologue
and epilogue.
This is not an issue for the core kernel, as the linker will relax these
loads into LEA instructions that take the address of __stack_chk_guard
directly. For modules, however, we need to work around this, by dealing
with R_X86_64_REX_GOTPCRELX relocations that refer to __stack_chk_guard.
In this case, given that this is a GOT load, the reference should not
refer to __stack_chk_guard directly, but to a memory location that holds
its address. So take the address of __stack_chk_guard into a static
variable, and fix up the relocations to refer to that.
[ mingo: Fix broken R_X86_64_GOTPCRELX definition. ]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250123190747.745588-7-brgerst@gmail.com
Clang may produce R_X86_64_REX_GOTPCRELX relocations when redefining the
stack protector location. Treat them as another type of PC-relative
relocation.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250123190747.745588-6-brgerst@gmail.com
Instead of having a private area for the stack canary, use
fixed_percpu_data for GSBASE like the native kernel.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250123190747.745588-5-brgerst@gmail.com
On 64-bit, this will prevent crashes when the canary access is changed
from %gs:40 to %gs:__stack_chk_guard(%rip). RIP-relative addresses from
the identity-mapped early boot code will target the wrong address with
zero-based percpu. KASLR could then shift that address to an unmapped
page causing a crash on boot.
This early boot code runs well before user-space is active and does not
need stack protector enabled.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250123190747.745588-4-brgerst@gmail.com
With GCC 8.1 now the minimum supported compiler for x86, these scripts
are no longer needed.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250123190747.745588-3-brgerst@gmail.com
Allow arch_freq_get_on_cpu to return an error for cases when retrieving
current CPU frequency is not possible, whether that being due to lack of
required arch support or due to other circumstances when the current
frequency cannot be determined at given point of time.
Signed-off-by: Beata Michalska <beata.michalska@arm.com>
Reviewed-by: Prasanna Kumar T S M <ptsm@linux.microsoft.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20250131162439.3843071-2-beata.michalska@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
IBS Op PMU on Zen5 reports DTLB and page size information differently
compared to prior generation. The change is enumerated by
CPUID_Fn8000001B_EAX[19].
IBS_OP_DATA3 Zen3/4 Zen5
----------------------------------------------------------------
19 IbsDcL2TlbHit1G Reserved
----------------------------------------------------------------
6 IbsDcL2tlbHit2M Reserved
----------------------------------------------------------------
5 IbsDcL1TlbHit1G PageSize:
4 IbsDcL1TlbHit2M 0 - 4K
1 - 2M
2 - 1G
3 - Reserved
Valid only if
IbsDcPhyAddrValid = 1
----------------------------------------------------------------
3 IbsDcL2TlbMiss IbsDcL2TlbMiss
Valid only if
IbsDcPhyAddrValid = 1
----------------------------------------------------------------
2 IbsDcL1tlbMiss IbsDcL1tlbMiss
Valid only if
IbsDcPhyAddrValid = 1
----------------------------------------------------------------
o Currently, only bit 2 and 3 are interpreted by IBS NMI handler for
PERF_SAMPLE_DATA_SRC. Add dependency on IbsDcPhyAddrValid for those
bits.
o Introduce new IBS Op PMU capability and expose it to userspace via
PMU's sysfs directory.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250205060547.1337-3-ravi.bangoria@amd.com
IBS Op PMU on Zen5 uarch added new Load Latency filtering capability. It's
advertised by CPUID_Fn8000001B_EAX bit 12. When enabled, IBS HW will raise
interrupt only for sample that had an IbsDcMissLat value greater than N
cycles, where N is a programmable value defined as multiples of 128 (i.e.
128, 256, 384 etc.) from 128-2048 cycles. Similar to L3MissOnly, IBS HW
internally drops the sample and restarts if the sample does not meet the
filtering criteria.
Add support for LdLat filtering in IBS Op PMU. Since hardware supports
threshold in multiple of 128, add a software filter on top to support
latency threshold with the granularity of 1 cycle between [128-2048].
Example usage:
# perf record -a -e ibs_op/ldlat=128/ -- sleep 5
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250205060547.1337-2-ravi.bangoria@amd.com
Put the MSR_AMD64_PATCH_LEVEL reading of the current microcode revision
the hw has, into a separate function.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20250211163648.30531-6-bp@kernel.org
Commit
a7939f0167 ("x86/microcode/amd: Cache builtin/initrd microcode early")
renamed it to save_microcode_in_initrd() and made it static. Zap the
forgotten declarations.
No functional changes.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20250211163648.30531-3-bp@kernel.org
handoff to the OS
- Check CPUID(0x23) leaf and subleafs presence properly
- Remove the PEBS-via-PT feature from being supported on hybrid systems
- Fix perf record/top default commands on systems without a raw PMU registered
-----BEGIN PGP SIGNATURE-----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=ThZf
-----END PGP SIGNATURE-----
Merge tag 'perf_urgent_for_v6.14_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 perf fixes from Borislav Petkov:
- Explicitly clear DEBUGCTL.LBR to prevent LBRs continuing being
enabled after handoff to the OS
- Check CPUID(0x23) leaf and subleafs presence properly
- Remove the PEBS-via-PT feature from being supported on hybrid systems
- Fix perf record/top default commands on systems without a raw PMU
registered
* tag 'perf_urgent_for_v6.14_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Ensure LBRs are disabled when a CPU is starting
perf/x86/intel: Fix ARCH_PERFMON_NUM_COUNTER_LEAF
perf/x86/intel: Clean up PEBS-via-PT on hybrid
perf/x86/rapl: Fix the error checking order
- Large set of fixes for vector handling, specially in the interactions
between host and guest state. This fixes a number of bugs affecting
actual deployments, and greatly simplifies the FP/SIMD/SVE handling.
Thanks to Mark Rutland for dealing with this thankless task.
- Fix an ugly race between vcpu and vgic creation/init, resulting in
unexpected behaviours.
- Fix use of kernel VAs at EL2 when emulating timers with nVHE.
- Small set of pKVM improvements and cleanups.
x86:
- Fix broken SNP support with KVM module built-in, ensuring the PSP
module is initialized before KVM even when the module infrastructure
cannot be used to order initcalls
- Reject Hyper-V SEND_IPI hypercalls if the local APIC isn't being emulated
by KVM to fix a NULL pointer dereference.
- Enter guest mode (L2) from KVM's perspective before initializing the vCPU's
nested NPT MMU so that the MMU is properly tagged for L2, not L1.
- Load the guest's DR6 outside of the innermost .vcpu_run() loop, as the
guest's value may be stale if a VM-Exit is handled in the fastpath.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmev2ykUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMvxwf/bw2u08moAYWAjJLROFvfiKXnznLS
iqJ2+jcw0lJ7wDqm4Zw8M5t74Rd+y5yzkLkZOyjav9yBB09zRkItiTHljCNMOQnt
2QptBa3CUN8N+rNnvVRt6dMkhw7z6n7eoFRSIDY2Y9PgiTapbFXPV1gFkMPO6+0f
SyF4LCr0iuDkJdvGAZJAH/Mp8nG6dv/A6a+Q+R1RkbKn9c2OdWw4VMfhIzimFGN6
0RFjbfXXvyO0aU/W/VHwvvuhcjGkAZWfHDdaTXqbvSMhayW562UPVMVBwXdVBmDj
Dk1gCKcbm4WyktbXYW6iOYj3MgdK96eI24ozps4R0aDexsrTRY4IfH4KEg==
=20Ql
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Large set of fixes for vector handling, especially in the
interactions between host and guest state.
This fixes a number of bugs affecting actual deployments, and
greatly simplifies the FP/SIMD/SVE handling. Thanks to Mark Rutland
for dealing with this thankless task.
- Fix an ugly race between vcpu and vgic creation/init, resulting in
unexpected behaviours
- Fix use of kernel VAs at EL2 when emulating timers with nVHE
- Small set of pKVM improvements and cleanups
x86:
- Fix broken SNP support with KVM module built-in, ensuring the PSP
module is initialized before KVM even when the module
infrastructure cannot be used to order initcalls
- Reject Hyper-V SEND_IPI hypercalls if the local APIC isn't being
emulated by KVM to fix a NULL pointer dereference
- Enter guest mode (L2) from KVM's perspective before initializing
the vCPU's nested NPT MMU so that the MMU is properly tagged for
L2, not L1
- Load the guest's DR6 outside of the innermost .vcpu_run() loop, as
the guest's value may be stale if a VM-Exit is handled in the
fastpath"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (25 commits)
x86/sev: Fix broken SNP support with KVM module built-in
KVM: SVM: Ensure PSP module is initialized if KVM module is built-in
crypto: ccp: Add external API interface for PSP module initialization
KVM: arm64: vgic: Hoist SGI/PPI alloc from vgic_init() to kvm_create_vgic()
KVM: arm64: timer: Drop warning on failed interrupt signalling
KVM: arm64: Fix alignment of kvm_hyp_memcache allocations
KVM: arm64: Convert timer offset VA when accessed in HYP code
KVM: arm64: Simplify warning in kvm_arch_vcpu_load_fp()
KVM: arm64: Eagerly switch ZCR_EL{1,2}
KVM: arm64: Mark some header functions as inline
KVM: arm64: Refactor exit handlers
KVM: arm64: Refactor CPTR trap deactivation
KVM: arm64: Remove VHE host restore of CPACR_EL1.SMEN
KVM: arm64: Remove VHE host restore of CPACR_EL1.ZEN
KVM: arm64: Remove host FPSIMD saving for non-protected KVM
KVM: arm64: Unconditionally save+flush host FPSIMD/SVE/SME state
KVM: x86: Load DR6 with guest value only before entering .vcpu_run() loop
KVM: nSVM: Enter guest mode before initializing nested NPT MMU
KVM: selftests: Add CPUID tests for Hyper-V features that need in-kernel APIC
KVM: selftests: Manage CPUID array in Hyper-V CPUID test's core helper
...
- Align signal stack correctly
- Convert to raw spinlocks where needed (irq and virtio)
- FPU related fixes
-----BEGIN PGP SIGNATURE-----
iQJKBAABCAA0FiEEdgfidid8lnn52cLTZvlZhesYu8EFAmexEa4WHHJpY2hhcmRA
c2lnbWEtc3Rhci5hdAAKCRBm+VmF6xi7wZvCEACnL/iy1h/NX57a5UsRfP+dcpis
skIJ+FHZdEErS60Mkqrw7qcOnSvOmLpq/8ZApJ2EFS6w+2XFGNw0Ev7vVSZJRXtM
1WHxcaY3O5qkkbvB8FzFKx9SEmzZg1m8ccofDxgIXJbPOEMpfcYIV4ZgmKtzHGZM
GFwoaOIWceIGLBB8YfcGcNNojLpewAJJLZ47KehYvJARLAFYTv0zl5gzUXJWCxc0
7oMbBmshxo74sS62Qd1j818TyDa8hZApP8cC2eNKUX6UMjSqj5L2n40ovSkkVGcw
YVovGS4RFYHW8gXIuwH3CpdqLm9rCfmZ2une6kgDSvKNw4bX+nuPvgewBa2QwuWa
9nQlpwFipFoUhfR9Sq+tDZnEGy2vUGfPMJMz2gqMI9yBp5kpFUyt1T/eFxasKs9T
ge7nkwHkqovxgtqQ26S5US+uDS450yH2Ga+xRHJXyeNenkeJMrTP2xCR7cjmMsjP
y5E0s6XtHPRQ4JFfUqI2btesmAAdMEAyhxdwASd0zvJVf/Q+VCzwWGYgij+s5f5e
3Zqaw1qaVIikDXnlOMpPWcmekMCBhIpi7joYz+BHSeBNjK756i0/YkHDMHDH2PBH
AbOPakddGfWSZzHnuNwQWr47L6/rJQl/vAmjtLYwW7Ped70zXoIeiQMkkHyfSTuO
73Fl6RH/W8Q/XJb9pA==
=5mdK
-----END PGP SIGNATURE-----
Merge tag 'uml-for-linus-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux
Pull UML fixes from Richard Weinberger:
- Align signal stack correctly
- Convert to raw spinlocks where needed (irq and virtio)
- FPU related fixes
* tag 'uml-for-linus-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux:
um: convert irq_lock to raw spinlock
um: virtio_uml: use raw spinlock
um: virt-pci: don't use kmalloc()
um: fix execve stub execution on old host OSs
um: properly align signal stack on x86_64
um: avoid copying FP state from init_task
um: add back support for FXSAVE registers
Using RCU lifetime rules to access kernfs_node::name can avoid the
trouble with kernfs_rename_lock in kernfs_name() and kernfs_path_from_node()
if the fs was created with KERNFS_ROOT_INVARIANT_PARENT. This is usefull
as it allows to implement kernfs_path_from_node() only with RCU
protection and avoiding kernfs_rename_lock. The lock is only required if
the __parent node can be changed and the function requires an unchanged
hierarchy while it iterates from the node to its parent.
The change is needed to allow the lookup of the node's path
(kernfs_path_from_node()) from context which runs always with disabled
preemption and or interrutps even on PREEMPT_RT. The problem is that
kernfs_rename_lock becomes a sleeping lock on PREEMPT_RT.
I went through all ::name users and added the required access for the lookup
with a few extensions:
- rdtgroup_pseudo_lock_create() drops all locks and then uses the name
later on. resctrl supports rename with different parents. Here I made
a temporal copy of the name while it is used outside of the lock.
- kernfs_rename_ns() accepts NULL as new_parent. This simplifies
sysfs_move_dir_ns() where it can set NULL in order to reuse the current
name.
- kernfs_rename_ns() is only using kernfs_rename_lock if the parents are
different. All users use either kernfs_rwsem (for stable path view) or
just RCU for the lookup. The ::name uses always RCU free.
Use RCU lifetime guarantees to access kernfs_node::name.
Suggested-by: Tejun Heo <tj@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Reported-by: syzbot+6ea37e2e6ffccf41a7e6@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/lkml/67251dc6.050a0220.529b6.015e.GAE@google.com/
Reported-by: Hillf Danton <hdanton@sina.com>
Closes: https://lore.kernel.org/20241102001224.2789-1-hdanton@sina.com
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20250213145023.2820193-7-bigeasy@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kernfs_rename_lock is used to obtain stable kernfs_node::{name|parent}
pointer. This is a preparation to access kernfs_node::parent under RCU
and ensure that the pointer remains stable under the RCU lifetime
guarantees.
For a complete path, as it is done in kernfs_path_from_node(), the
kernfs_rename_lock is still required in order to obtain a stable parent
relationship while computing the relevant node depth. This must not
change while the nodes are inspected in order to build the path.
If the kernfs user never moves the nodes (changes the parent) then the
kernfs_rename_lock is not required and the RCU guarantees are
sufficient. This "restriction" can be set with
KERNFS_ROOT_INVARIANT_PARENT. Otherwise the lock is required.
Rename kernfs_node::parent to kernfs_node::__parent to denote the RCU
access and use RCU accessor while accessing the node.
Make cgroup use KERNFS_ROOT_INVARIANT_PARENT since the parent here can
not change.
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20250213145023.2820193-6-bigeasy@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Reject Hyper-V SEND_IPI hypercalls if the local APIC isn't being emulated
by KVM to fix a NULL pointer dereference.
- Enter guest mode (L2) from KVM's perspective before initializing the vCPU's
nested NPT MMU so that the MMU is properly tagged for L2, not L1.
- Load the guest's DR6 outside of the innermost .vcpu_run() loop, as the
guest's value may be stale if a VM-Exit is handled in the fastpath.
-----BEGIN PGP SIGNATURE-----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=aFcV
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-fixes-6.14-rcN' of https://github.com/kvm-x86/linux into HEAD
KVM fixes for 6.14 part 1
- Reject Hyper-V SEND_IPI hypercalls if the local APIC isn't being emulated
by KVM to fix a NULL pointer dereference.
- Enter guest mode (L2) from KVM's perspective before initializing the vCPU's
nested NPT MMU so that the MMU is properly tagged for L2, not L1.
- Load the guest's DR6 outside of the innermost .vcpu_run() loop, as the
guest's value may be stale if a VM-Exit is handled in the fastpath.
Fix issues with enabling SNP host support and effectively SNP support
which is broken with respect to the KVM module being built-in.
SNP host support is enabled in snp_rmptable_init() which is invoked as
device_initcall(). SNP check on IOMMU is done during IOMMU PCI init
(IOMMU_PCI_INIT stage). And for that reason snp_rmptable_init() is
currently invoked via device_initcall() and cannot be invoked via
subsys_initcall() as core IOMMU subsystem gets initialized via
subsys_initcall().
Now, if kvm_amd module is built-in, it gets initialized before SNP host
support is enabled in snp_rmptable_init() :
[ 10.131811] kvm_amd: TSC scaling supported
[ 10.136384] kvm_amd: Nested Virtualization enabled
[ 10.141734] kvm_amd: Nested Paging enabled
[ 10.146304] kvm_amd: LBR virtualization supported
[ 10.151557] kvm_amd: SEV enabled (ASIDs 100 - 509)
[ 10.156905] kvm_amd: SEV-ES enabled (ASIDs 1 - 99)
[ 10.162256] kvm_amd: SEV-SNP enabled (ASIDs 1 - 99)
[ 10.171508] kvm_amd: Virtual VMLOAD VMSAVE supported
[ 10.177052] kvm_amd: Virtual GIF supported
...
...
[ 10.201648] kvm_amd: in svm_enable_virtualization_cpu
And then svm_x86_ops->enable_virtualization_cpu()
(svm_enable_virtualization_cpu) programs MSR_VM_HSAVE_PA as following:
wrmsrl(MSR_VM_HSAVE_PA, sd->save_area_pa);
So VM_HSAVE_PA is non-zero before SNP support is enabled on all CPUs.
snp_rmptable_init() gets invoked after svm_enable_virtualization_cpu()
as following :
...
[ 11.256138] kvm_amd: in svm_enable_virtualization_cpu
...
[ 11.264918] SEV-SNP: in snp_rmptable_init
This triggers a #GP exception in snp_rmptable_init() when snp_enable()
is invoked to set SNP_EN in SYSCFG MSR:
[ 11.294289] unchecked MSR access error: WRMSR to 0xc0010010 (tried to write 0x0000000003fc0000) at rIP: 0xffffffffaf5d5c28 (native_write_msr+0x8/0x30)
...
[ 11.294404] Call Trace:
[ 11.294482] <IRQ>
[ 11.294513] ? show_stack_regs+0x26/0x30
[ 11.294522] ? ex_handler_msr+0x10f/0x180
[ 11.294529] ? search_extable+0x2b/0x40
[ 11.294538] ? fixup_exception+0x2dd/0x340
[ 11.294542] ? exc_general_protection+0x14f/0x440
[ 11.294550] ? asm_exc_general_protection+0x2b/0x30
[ 11.294557] ? __pfx_snp_enable+0x10/0x10
[ 11.294567] ? native_write_msr+0x8/0x30
[ 11.294570] ? __snp_enable+0x5d/0x70
[ 11.294575] snp_enable+0x19/0x20
[ 11.294578] __flush_smp_call_function_queue+0x9c/0x3a0
[ 11.294586] generic_smp_call_function_single_interrupt+0x17/0x20
[ 11.294589] __sysvec_call_function+0x20/0x90
[ 11.294596] sysvec_call_function+0x80/0xb0
[ 11.294601] </IRQ>
[ 11.294603] <TASK>
[ 11.294605] asm_sysvec_call_function+0x1f/0x30
...
[ 11.294631] arch_cpu_idle+0xd/0x20
[ 11.294633] default_idle_call+0x34/0xd0
[ 11.294636] do_idle+0x1f1/0x230
[ 11.294643] ? complete+0x71/0x80
[ 11.294649] cpu_startup_entry+0x30/0x40
[ 11.294652] start_secondary+0x12d/0x160
[ 11.294655] common_startup_64+0x13e/0x141
[ 11.294662] </TASK>
This #GP exception is getting triggered due to the following errata for
AMD family 19h Models 10h-1Fh Processors:
Processor may generate spurious #GP(0) Exception on WRMSR instruction:
Description:
The Processor will generate a spurious #GP(0) Exception on a WRMSR
instruction if the following conditions are all met:
- the target of the WRMSR is a SYSCFG register.
- the write changes the value of SYSCFG.SNPEn from 0 to 1.
- One of the threads that share the physical core has a non-zero
value in the VM_HSAVE_PA MSR.
The document being referred to above:
https://www.amd.com/content/dam/amd/en/documents/processor-tech-docs/revision-guides/57095-PUB_1_01.pdf
To summarize, with kvm_amd module being built-in, KVM/SVM initialization
happens before host SNP is enabled and this SVM initialization
sets VM_HSAVE_PA to non-zero, which then triggers a #GP when
SYSCFG.SNPEn is being set and this will subsequently cause
SNP_INIT(_EX) to fail with INVALID_CONFIG error as SYSCFG[SnpEn] is not
set on all CPUs.
Essentially SNP host enabling code should be invoked before KVM
initialization, which is currently not the case when KVM is built-in.
Add fix to call snp_rmptable_init() early from iommu_snp_enable()
directly and not invoked via device_initcall() which enables SNP host
support before KVM initialization with kvm_amd module built-in.
Add additional handling for `iommu=off` or `amd_iommu=off` options.
Note that IOMMUs need to be enabled for SNP initialization, therefore,
if host SNP support is enabled but late IOMMU initialization fails
then that will cause PSP driver's SNP_INIT to fail as IOMMU SNP sanity
checks in SNP firmware will fail with invalid configuration error as
below:
[ 9.723114] ccp 0000:23:00.1: sev enabled
[ 9.727602] ccp 0000:23:00.1: psp enabled
[ 9.732527] ccp 0000:a2:00.1: enabling device (0000 -> 0002)
[ 9.739098] ccp 0000:a2:00.1: no command queues available
[ 9.745167] ccp 0000:a2:00.1: psp enabled
[ 9.805337] ccp 0000:23:00.1: SEV-SNP: failed to INIT rc -5, error 0x3
[ 9.866426] ccp 0000:23:00.1: SEV API:1.53 build:5
Fixes: c3b86e61b7 ("x86/cpufeatures: Enable/unmask SEV-SNP CPU feature")
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Co-developed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Acked-by: Joerg Roedel <jroedel@suse.de>
Message-ID: <138b520fb83964782303b43ade4369cd181fdd9c.1739226950.git.ashish.kalra@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The kernel's initcall infrastructure lacks the ability to express
dependencies between initcalls, whereas the modules infrastructure
automatically handles dependencies via symbol loading. Ensure the
PSP SEV driver is initialized before proceeding in sev_hardware_setup()
if KVM is built-in as the dependency isn't handled by the initcall
infrastructure.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Message-ID: <f78ddb64087df27e7bcb1ae0ab53f55aa0804fab.1739226950.git.ashish.kalra@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCZ672+AAKCRCAXGG7T9hj
vqnNAP99iQfUC5je/UYE4k9ku0oRD9+d65G5YCmnLv5egUOuTgD/UT+N0LYaahS7
5hRh61sicj57dsrN4kA4U4TpVvoFsAY=
=CUIl
-----END PGP SIGNATURE-----
Merge tag 'for-linus-6.14-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"Three fixes to xen-swiotlb driver:
- two fixes for issues coming up due to another fix in 6.12
- addition of an __init annotation"
* tag 'for-linus-6.14-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
Xen/swiotlb: mark xen_swiotlb_fixup() __init
x86/xen: allow larger contiguous memory regions in PV guests
xen/swiotlb: relax alignment requirements
Convert the shadow MMU to use per-rmap locking instead of the per-VM
mmu_lock to protect rmaps when aging SPTEs. When A/D bits are enabled, it
is safe to simply clear the Accessed bits, i.e. KVM just needs to ensure
the parent page table isn't freed.
The less obvious case is marking SPTEs for access tracking in the
non-A/D case (for EPT only). Because aging a gfn means making the SPTE
not-present, KVM needs to play nice with the case where the CPU has TLB
entries for a SPTE that is not-present in memory. For example, when
doing dirty tracking, if KVM encounters a non-present shadow accessed SPTE,
KVM must know to do a TLB invalidation.
Fortunately, KVM already provides (and relies upon) the necessary
functionality. E.g. KVM doesn't flush TLBs when aging pages (even in the
clear_flush_young() case), and when harvesting dirty bitmaps, KVM flushes
based on the dirty bitmaps, not on SPTEs.
Co-developed-by: James Houghton <jthoughton@google.com>
Signed-off-by: James Houghton <jthoughton@google.com>
Link: https://lore.kernel.org/r/20250204004038.1680123-12-jthoughton@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a lockless version of for_each_rmap_spte(), which is pretty much the
same as the normal version, except that it doesn't BUG() the host if a
non-present SPTE is encountered. When mmu_lock is held, it should be
impossible for a different task to zap a SPTE, _and_ zapped SPTEs must
be removed from their rmap chain prior to dropping mmu_lock. Thus, the
normal walker BUG()s if a non-present SPTE is encountered as something is
wildly broken.
When walking rmaps without holding mmu_lock, the SPTEs pointed at by the
rmap chain can be zapped/dropped, and so a lockless walk can observe a
non-present SPTE if it runs concurrently with a different operation that
is zapping SPTEs.
Signed-off-by: James Houghton <jthoughton@google.com>
Link: https://lore.kernel.org/r/20250204004038.1680123-11-jthoughton@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Steal another bit from rmap entries (which are word aligned pointers, i.e.
have 2 free bits on 32-bit KVM, and 3 free bits on 64-bit KVM), and use
the bit to implement a *very* rudimentary per-rmap spinlock. The only
anticipated usage of the lock outside of mmu_lock is for aging gfns, and
collisions between aging and other MMU rmap operations are quite rare,
e.g. unless userspace is being silly and aging a tiny range over and over
in a tight loop, time between contention when aging an actively running VM
is O(seconds). In short, a more sophisticated locking scheme shouldn't be
necessary.
Note, the lock only protects the rmap structure itself, SPTEs that are
pointed at by a locked rmap can still be modified and zapped by another
task (KVM drops/zaps SPTEs before deleting the rmap entries)
Co-developed-by: James Houghton <jthoughton@google.com>
Signed-off-by: James Houghton <jthoughton@google.com>
Link: https://lore.kernel.org/r/20250204004038.1680123-10-jthoughton@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Refactor the pte_list and rmap code to always read and write rmap_head->val
exactly once, e.g. by collecting changes in a local variable and then
propagating those changes back to rmap_head->val as appropriate. This will
allow implementing a per-rmap rwlock (of sorts) by adding a LOCKED bit into
the rmap value alongside the MANY bit.
Signed-off-by: James Houghton <jthoughton@google.com>
Acked-by: Yu Zhao <yuzhao@google.com>
Reviewed-by: James Houghton <jthoughton@google.com>
Link: https://lore.kernel.org/r/20250204004038.1680123-9-jthoughton@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
When aging SPTEs and the TDP MMU is enabled, process the shadow MMU if and
only if the VM has at least one shadow page, as opposed to checking if the
VM has rmaps. Checking for rmaps will effectively yield a false positive
if the VM ran nested TDP VMs in the past, but is not currently doing so.
Signed-off-by: James Houghton <jthoughton@google.com>
Acked-by: Yu Zhao <yuzhao@google.com>
Link: https://lore.kernel.org/r/20250204004038.1680123-8-jthoughton@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reorder the processing of the TDP MMU versus the shadow MMU when aging
SPTEs, and skip the shadow MMU entirely in the test-only case if the TDP
MMU reports that the page is young, i.e. completely avoid taking mmu_lock
if the TDP MMU SPTE is young. Swap the order for the test-and-age helper
as well for consistency.
Signed-off-by: James Houghton <jthoughton@google.com>
Acked-by: Yu Zhao <yuzhao@google.com>
Link: https://lore.kernel.org/r/20250204004038.1680123-7-jthoughton@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Walk the TDP MMU in an RCU read-side critical section without holding
mmu_lock when harvesting and potentially updating age information on
TDP MMU SPTEs. Add a new macro to do RCU-safe walking of TDP MMU roots,
and do all SPTE aging with atomic updates; while clobbering Accessed
information is ok, KVM must not corrupt other bits, e.g. must not drop
a Dirty or Writable bit when making a SPTE young..
If updating a SPTE to mark it for access tracking fails, leave it as is
and treat it as if it were young. If the spte is being actively modified,
it is most likely young.
Acquire and release mmu_lock for write when harvesting age information
from the shadow MMU, as the shadow MMU doesn't yet support aging outside
of mmu_lock.
Suggested-by: Yu Zhao <yuzhao@google.com>
Signed-off-by: James Houghton <jthoughton@google.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20250204004038.1680123-5-jthoughton@google.com
[sean: massage changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
In anticipation of aging SPTEs outside of mmu_lock, force A/D-disabled
SPTEs to be updated atomically, as aging A/D-disabled SPTEs will mark them
for access-tracking outside of mmu_lock. Coupled with restoring access-
tracked SPTEs in the fast page fault handler, the end result is that
A/D-disable SPTEs will be volatile at all times.
Reviewed-by: James Houghton <jthoughton@google.com>
Link: https://lore.kernel.org/all/Z60bhK96JnKIgqZQ@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Don't force SPTE modifications to be done atomically if the only volatile
bit in the SPTE is the Accessed bit. KVM and the primary MMU tolerate
stale aging state, and the probability of an Accessed bit A/D assist being
clobbered *and* affecting again is likely far lower than the probability
of consuming stale information due to not flushing TLBs when aging.
Rename spte_has_volatile_bits() to spte_needs_atomic_update() to better
capture the nature of the helper.
Opportunstically do s/write/update on the TDP MMU wrapper, as it's not
simply the "write" that needs to be done atomically, it's the entire
update, i.e. the entire read-modify-write operation needs to be done
atomically so that KVM has an accurate view of the old SPTE.
Leave kvm_tdp_mmu_write_spte_atomic() as is. While the name is imperfect,
it pairs with kvm_tdp_mmu_write_spte(), which in turn pairs with
kvm_tdp_mmu_read_spte(). And renaming all of those isn't obviously a net
positive, and would require significant churn.
Signed-off-by: James Houghton <jthoughton@google.com>
Link: https://lore.kernel.org/r/20250204004038.1680123-6-jthoughton@google.com
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
This new function, tdp_mmu_clear_spte_bits_atomic(), will be used in a
follow-up patch to enable lockless Accessed bit clearing.
Signed-off-by: James Houghton <jthoughton@google.com>
Acked-by: Yu Zhao <yuzhao@google.com>
Link: https://lore.kernel.org/r/20250204004038.1680123-4-jthoughton@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Sami reminded me that FineIBT failure does not hook into the regular
CFI failure case, and as such CFI_PERMISSIVE does not work.
Reported-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lkml.kernel.org/r/20250214092619.GB21726@noisy.programming.kicks-ass.net
Scott found that mem32_serial_in() is an ideal speculation gadget, an
indirectly callable function that takes an adddress and offset and
immediately does a load.
Use static_call() to take away the need for indirect calls and
explicitly seal the functions to ensure they're not callable on IBT
enabled parts.
Reported-by: Scott Constable <scott.d.constable@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20250207122546.919773202@infradead.org
Basically, get rid of the .warn argument and explicitly don't call the
function when we know there isn't an endbr. This makes the calling
code clearer.
Note: perhaps don't add functions to .cfi_sites when the function
doesn't have endbr -- OTOH why would the compiler emit the prefix if
it has already determined there are no indirect callers and has
omitted the ENDBR instruction.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20250207122546.815505775@infradead.org
Notably, don't attempt to decode an immediate when MOD == 3.
Additionally have it return the instruction length, such that WARN
like bugs can more reliably skip to the correct instruction.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20250207122546.721120726@infradead.org
Now that paravirt call patching is implemented using alternatives, it
is possible to avoid having to patch the alternative sites by
including the altinstr_replacement calls in the call_sites list.
This means we're now stacking relative adjustments like so:
callthunks_patch_builtin_calls():
patches all function calls to target: func() -> func()-10
since the CALL accounting lives in the CALL_PADDING.
This explicitly includes .altinstr_replacement
alt_replace_call():
patches: x86_BUG() -> target()
this patching is done in a relative manner, and will preserve
the above adjustment, meaning that with calldepth patching it
will do: x86_BUG()-10 -> target()-10
apply_relocation():
does code relocation, and adjusts all RIP-relative instructions
to the new location, also in a relative manner.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20250207122546.617187089@infradead.org
The handoff between the boot stubs and start_secondary() are before IBT is
enabled and is definitely not subject to kCFI. As such, suppress all that for
this function.
Notably when the ENDBR poison would become fatal (ud1 instead of nop) this will
trigger a tripple fault because we haven't set up the IDT to handle #UD yet.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20250207122546.509520369@infradead.org
With the introduction of kCFI the addition of ENDBR to
SYM_FUNC_START* no longer suffices to make the function indirectly
callable. This now requires the use of SYM_TYPED_FUNC_START.
As such, remove the implicit ENDBR from SYM_FUNC_START* and add some
explicit annotations to fix things up again.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20250207122546.409116003@infradead.org
The expectation is that all EXPORT'ed symbols are free to have their
address taken and called indirectly. The majority of the assembly
defined functions currently violate this expectation.
Make then all use SYM_TYPED_FUNC_START() in order to emit the proper
kCFI preamble.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20250207122546.302679189@infradead.org
Pretty much every caller of is_endbr() actually wants to test something at an
address and ends up doing get_kernel_nofault(). Fold the lot into a more
convenient helper.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20250207122546.181367417@infradead.org
Depends on the simplifications from commit 1d7e707af4 ("Revert "x86/module: prepare module loading for ROX allocations of text"")
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
The init_one_iommu() takes an unsigned int argument that can't be checked for
the boundaries at compile time and GCC complains about that when build with
`make W=1`:
arch/x86/events/amd/iommu.c:441:53: note: directive argument in the range [0, 4294967294]
arch/x86/events/amd/iommu.c:441:9: note: ‘snprintf’ output between 12 and 21 bytes into a destination of size 16
Increase the size to cover all possible cases.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250210193412.483233-1-andriy.shevchenko@linux.intel.com
These helpers are not specific to x86_64 and will be needed by common code.
Remove some unnecessary #includes.
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Link: https://lore.kernel.org/r/1738955002-20821-3-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1738955002-20821-3-git-send-email-nunodasneves@linux.microsoft.com>
Move hv_current_partition_id and hv_get_partition_id() to hv_common.c,
and call hv_get_partition_id() on arm64 in hyperv_init(). These aren't
specific to x86_64 and will be needed by common code.
Set hv_current_partition_id to HV_PARTITION_ID_SELF by default.
Rename struct hv_get_partition_id to hv_output_get_partition_id, to
make it distinct from the function hv_get_partition_id(), and match
the original Hyper-V struct name.
Remove the BUG()s. Failing to get the id need not crash the machine.
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/1738955002-20821-2-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1738955002-20821-2-git-send-email-nunodasneves@linux.microsoft.com>
Today a PV guest (including dom0) can create 2MB contiguous memory
regions for DMA buffers at max. This has led to problems at least
with the megaraid_sas driver, which wants to allocate a 2.3MB DMA
buffer.
The limiting factor is the frame array used to do the hypercall for
making the memory contiguous, which has 512 entries and is just a
static array in mmu_pv.c.
In order to not waste memory for non-PV guests, put the initial
frame array into .init.data section and dynamically allocate an array
from the .init_after_bootmem hook of PV guests.
In case a contiguous memory area larger than the initially supported
2MB is requested, allocate a larger buffer for the frame list. Note
that such an allocation is tried only after memory management has been
initialized properly, which is tested via a flag being set in the
.init_after_bootmem hook.
Fixes: 9f40ec84a7 ("xen/swiotlb: add alignment check for dma buffers")
Signed-off-by: Juergen Gross <jgross@suse.com>
Tested-by: Alan Robinson <Alan.Robinson@fujitsu.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
The stack needs to be properly aligned so 16 byte memory accesses on the
stack are correct. This was broken when introducing the dynamic math
register sizing as the rounding was not moved appropriately.
Fixes: 3f17fed214 ("um: switch to regset API and depend on XSTATE")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20250107133509.265576-1-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
It was reported that qemu may not enable the XSTATE CPU extension, which
is a requirement after commit 3f17fed214 ("um: switch to regset API
and depend on XSTATE"). Add a fallback to use FXSAVE (FP registers on
x86_64 and XFP on i386) which is just a shorter version of the same
data. The only difference is that the XSTATE magic should not be set in
the signal frame.
Note that this still drops support for the older i386 FP register layout
as supporting this would require more backward compatibility to build a
correct signal frame.
Fixes: 3f17fed214 ("um: switch to regset API and depend on XSTATE")
Reported-by: SeongJae Park <sj@kernel.org>
Closes: https://lore.kernel.org/r/20241203070218.240797-1-sj@kernel.org
Tested-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20241204074827.1582917-1-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
crc32c_arch() is affected by
https://github.com/llvm/llvm-project/issues/20571 where clang
unnecessarily spills the inputs to "rm"-constrained operands to the
stack. Replace "rm" with ASM_INPUT_RM which partially works around this
by expanding to "r" when the compiler is clang. This results in better
code generation with clang, though still not optimal.
Link: https://lore.kernel.org/r/20250210210741.471725-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
When registering an encrypted memory region for SEV-MEM/SEV-ES guests,
pin the pages with FOLL_TERM so that the pages are migrated out of
MIGRATE_CMA/ZONE_MOVABLE. Failure to do so violates the CMA/MOVABLE
mechanisms and can result in fragmentation due to unmovable pages, e.g.
can make CMA allocations fail.
Signed-off-by: Ge Yang <yangge1116@126.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/1739241423-14326-1-git-send-email-yangge1116@126.com
[sean: massage changelog, make @flags an unsigned int]
Signed-off-by: Sean Christopherson <seanjc@google.com>
When updating PV clocks, handle the Xen-specific UNSTABLE_TSC override in
the main kvm_guest_time_update() by simply clearing PVCLOCK_TSC_STABLE_BIT
in the flags of the reference pvclock structure. Expand the comment to
(hopefully) make it obvious that Xen clocks need to be processed after all
clocks that care about the TSC_STABLE flag.
No functional change intended.
Cc: Paul Durrant <pdurrant@amazon.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Link: https://lore.kernel.org/r/20250201013827.680235-12-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
When updating paravirtual clocks, setup the Hyper-V TSC page before
Xen PV clocks. This will allow dropping xen_pvclock_tsc_unstable in favor
of simply clearing PVCLOCK_TSC_STABLE_BIT in the reference flags.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Link: https://lore.kernel.org/r/20250201013827.680235-11-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Remove the per-vCPU "cache" of the reference pvclock and instead cache
only the TSC shift+multiplier. All other fields in pvclock are fully
recomputed by kvm_guest_time_update(), i.e. aren't actually persisted.
In addition to shaving a few bytes, explicitly tracking the TSC shift/mul
fields makes it easier to see that those fields are tied to hw_tsc_khz
(they exist to avoid having to do expensive math in the common case).
And conversely, not tracking the other fields makes it easier to see that
things like the version number are pulled from the guest's copy, not from
KVM's reference.
Reviewed-by: Paul Durrant <paul@xen.org>
Link: https://lore.kernel.org/r/20250201013827.680235-10-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Pass the reference pvclock structure that's used to setup each individual
pvclock as a parameter to kvm_setup_guest_pvclock() as a preparatory step
toward removing kvm_vcpu_arch.hv_clock.
No functional change intended.
Reviewed-by: Paul Durrant <paul@xen.org>
Link: https://lore.kernel.org/r/20250201013827.680235-9-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Handle "guest stopped" propagation only for kvmclock, as the flag is set
if and only if kvmclock is "active", i.e. can only be set for Xen PV clock
if kvmclock *and* Xen PV clock are in-use by the guest, which creates very
bizarre behavior for the guest.
Simply restrict the flag to kvmclock, e.g. instead of trying to handle
Xen PV clock, as propagation of PVCLOCK_GUEST_STOPPED was unintentionally
added during a refactoring, and while Xen proper defines
XEN_PVCLOCK_GUEST_STOPPED, there's no evidence that Xen guests actually
support the flag.
Check and clear pvclock_set_guest_stopped_request if and only if kvmclock
is active to preserve the original behavior, i.e. keep the flag pending
if kvmclock happens to be disabled when KVM processes the initial request.
Fixes: aa096aa0a0 ("KVM: x86/xen: setup pvclock updates")
Cc: Paul Durrant <pdurrant@amazon.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Link: https://lore.kernel.org/r/20250201013827.680235-8-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
When updating a specific PV clock, make a full copy of KVM's reference
copy/cache so that PVCLOCK_GUEST_STOPPED doesn't bleed across clocks.
E.g. in the unlikely scenario the guest has enabled both kvmclock and Xen
PV clock, a dangling GUEST_STOPPED in kvmclock would bleed into Xen PV
clock.
Using a local copy of the pvclock structure also sets the stage for
eliminating the per-vCPU copy/cache (only the TSC frequency information
actually "needs" to be cached/persisted).
Fixes: aa096aa0a0 ("KVM: x86/xen: setup pvclock updates")
Reviewed-by: Paul Durrant <paul@xen.org>
Link: https://lore.kernel.org/r/20250201013827.680235-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use the guest's copy of its pvclock when starting a Xen timer, as KVM's
reference copy may not be up-to-date, i.e. may yield a false positive of
sorts. In the unlikely scenario that the guest is starting a Xen timer
and has used a Xen pvclock in the past, but has since but turned it "off",
then vcpu->arch.hv_clock may be stale, as KVM's reference copy is updated
if and only if at least one pvclock is enabled.
Furthermore, vcpu->arch.hv_clock is currently used by three different
pvclocks: kvmclock, Xen, and Xen compat. While it's extremely unlikely a
guest would ever enable multiple pvclocks, effectively sharing KVM's
reference clock could yield very weird behavior. Using the guest's active
Xen pvclock instead of KVM's reference will allow dropping KVM's
reference copy.
Fixes: 451a707813 ("KVM: x86/xen: improve accuracy of Xen timers")
Cc: Paul Durrant <pdurrant@amazon.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Link: https://lore.kernel.org/r/20250201013827.680235-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Handle "guest stopped" requests once per guest time update in preparation
of restoring KVM's historical behavior of setting PVCLOCK_GUEST_STOPPED
for kvmclock and only kvmclock. For now, simply move the code to minimize
the probability of an unintentional change in functionally.
Note, in practice, all clocks are guaranteed to see the request (or not)
even though each PV clock processes the request individual, as KVM holds
vcpu->mutex (blocks KVM_KVMCLOCK_CTRL) and it should be impossible for
KVM's suspend notifier to run while KVM is handling requests. And because
the helper updates the reference flags, all subsequent PV clock updates
will pick up PVCLOCK_GUEST_STOPPED.
Note #2, once PVCLOCK_GUEST_STOPPED is restricted to kvmclock, the
horrific #ifdef will go away.
Cc: Paul Durrant <pdurrant@amazon.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Link: https://lore.kernel.org/r/20250201013827.680235-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Drop the local pvclock_flags in kvm_guest_time_update(), the local variable
is immediately shoved into the per-vCPU "cache", i.e. the local variable
serves no purpose.
No functional change intended.
Reviewed-by: Paul Durrant <paul@xen.org>
Link: https://lore.kernel.org/r/20250201013827.680235-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Drop KVM's handling of kvm_set_guest_paused() failure when reacting to a
SUSPEND notification, as kvm_set_guest_paused() only "fails" if the vCPU
isn't using kvmclock, and KVM's notifier callback pre-checks that kvmclock
is active. I.e. barring some bizarre edge case that shouldn't be treated
as an error in the first place, kvm_arch_suspend_notifier() can't fail.
Reviewed-by: Paul Durrant <paul@xen.org>
Link: https://lore.kernel.org/r/20250201013827.680235-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Defer runtime CPUID updates until the next non-faulting CPUID emulation
or KVM_GET_CPUID2, which are the only paths in KVM that consume the
dynamic entries. Deferring the updates is especially beneficial to
nested VM-Enter/VM-Exit, as KVM will almost always detect multiple state
changes, not to mention the updates don't need to be realized while L2 is
active if CPUID is being intercepted by L1 (CPUID is a mandatory intercept
on Intel, but not AMD).
Deferring CPUID updates shaves several hundred cycles from nested VMX
roundtrips, as measured from L2 executing CPUID in a tight loop:
SKX 6850 => 6450
ICX 9000 => 8800
EMR 7900 => 7700
Alternatively, KVM could update only the CPUID leaves that are affected
by the state change, e.g. update XSAVE info only if XCR0 or XSS changes,
but that adds non-trivial complexity and doesn't solve the underlying
problem of nested transitions potentially changing both XCR0 and XSS, on
both nested VM-Enter and VM-Exit.
Skipping updates entirely if L2 is active and CPUID is being intercepted
by L1 could work for the common case. However, simply skipping updates if
L2 is active is *very* subtly dangerous and complex. Most KVM updates are
triggered by changes to the current vCPU state, which may be L2 state,
whereas performing updates only for L1 would requiring detecting changes
to L1 state. KVM would need to either track relevant L1 state, or defer
runtime CPUID updates until the next nested VM-Exit. The former is ugly
and complex, while the latter comes with similar dangers to deferring all
CPUID updates, and would only address the nested VM-Enter path.
To guard against using stale data, disallow querying dynamic CPUID feature
bits, i.e. features that KVM updates at runtime, via a compile-time
assertion in guest_cpu_cap_has(). Exempt MWAIT from the rule, as the
MISC_ENABLE_NO_MWAIT means that MWAIT is _conditionally_ a dynamic CPUID
feature.
Note, the rule could be enforced for MWAIT as well, e.g. by querying guest
CPUID in kvm_emulate_monitor_mwait, but there's no obvious advtantage to
doing so, and allowing MWAIT for guest_cpuid_has() opens up a different can
of worms. MONITOR/MWAIT can't be virtualized (for a reasonable definition),
and the nature of the MWAIT_NEVER_UD_FAULTS and MISC_ENABLE_NO_MWAIT quirks
means checking X86_FEATURE_MWAIT outside of kvm_emulate_monitor_mwait() is
wrong for other reasons.
Beyond the aforementioned feature bits, the only other dynamic CPUID
(sub)leaves are the XSAVE sizes, and similar to MWAIT, consuming those
CPUID entries in KVM is all but guaranteed to be a bug. The layout for an
actual XSAVE buffer depends on the format (compacted or not) and
potentially the features that are actually enabled. E.g. see the logic in
fpstate_clear_xstate_component() needed to poke into the guest's effective
XSAVE state to clear MPX state on INIT. KVM does consume
CPUID.0xD.0.{EAX,EDX} in kvm_check_cpuid() and cpuid_get_supported_xcr0(),
but not EBX, which is the only dynamic output register in the leaf.
Link: https://lore.kernel.org/r/20241211013302.1347853-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Rework MONITOR/MWAIT emulation to query X86_FEATURE_MWAIT if and only if
the MISC_ENABLE_NO_MWAIT quirk is enabled, in which case MWAIT is not a
dynamic, KVM-controlled CPUID feature. KVM's funky ABI for that quirk is
to emulate MONITOR/MWAIT as nops if userspace sets MWAIT in guest CPUID.
For the case where KVM owns the MWAIT feature bit, check MISC_ENABLES
itself, i.e. check the actual control, not its reflection in guest CPUID.
Avoiding consumption of dynamic CPUID features will allow KVM to defer
runtime CPUID updates until kvm_emulate_cpuid(), i.e. until the updates
become visible to the guest. Alternatively, KVM could play other games
with runtime CPUID updates, e.g. by precisely specifying which feature
bits to update, but doing so adds non-trivial complexity and doesn't solve
the underlying issue of unnecessary updates causing meaningful overhead
for nested virtualization roundtrips.
Link: https://lore.kernel.org/r/20241211013302.1347853-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
When emulating CPUID, retrieve MSR_IA32_TSX_CTRL.TSX_CTRL_CPUID_CLEAR if
and only if RTM and/or HLE feature bits need to be cleared. Getting the
MSR value is unnecessary if neither bit is set, and avoiding the lookup
saves ~80 cycles for vCPUs without RTM or HLE.
Cc: Jim Mattson <jmattson@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Link: https://lore.kernel.org/r/20241211013302.1347853-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Rework xstate_required_size() to use a for-loop and continue, to make it
more obvious that the xstate_sizes[] lookups are indeed correctly bounded,
and to make it (hopefully) easier to understand that the loop is iterating
over supported XSAVE features.
Link: https://lore.kernel.org/r/20241211013302.1347853-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
The default type of a decimal constant is determined by the magnitude of
its value. If the value falls within the range of int, its type is int;
otherwise, if it falls within the range of unsigned int, its type is
unsigned int. This results in the constant 48 being of type int. In the
following min call,
g_phys_as = min(g_phys_as, 48);
This leads to a building warning/error (CONFIG_KVM_WERROR=y) caused by
the mismatch between the types of the two arguments to macro min. By
adding the suffix U to explicitly declare the type of the constant, this
issue is fixed.
Signed-off-by: Ethan Zhao <haifeng.zhao@linux.intel.com>
Link: https://lore.kernel.org/r/20250127013837.12983-1-haifeng.zhao@linux.intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
In kvm_set_mp_state(), ensure that vcpu->arch.pv.pv_unhalted is always
cleared on a transition to KVM_MP_STATE_RUNNABLE, so that the next HLT
instruction will be respected.
Fixes: 6aef266c6e ("kvm hypervisor : Add a hypercall to KVM hypervisor to support pv-ticketlocks")
Fixes: b6b8a1451f ("KVM: nVMX: Rework interception of IRQs and NMIs")
Fixes: 38c0b192bd ("KVM: SVM: leave halted state on vmexit")
Fixes: 1a65105a5a ("KVM: x86/xen: handle PV spinlocks slowpath")
Signed-off-by: Jim Mattson <jmattson@google.com>
Link: https://lore.kernel.org/r/20250113200150.487409-3-jmattson@google.com
[sean: add Xen PV spinlocks to the list of Fixes, tweak changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Replace all open-coded assignments to vcpu->arch.mp_state with calls
to a new helper, kvm_set_mp_state(), to centralize all changes to
mp_state.
No functional change intended.
Signed-off-by: Jim Mattson <jmattson@google.com>
Link: https://lore.kernel.org/r/20250113200150.487409-2-jmattson@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use kvfree_rcu() to free the old optimized APIC instead of open coding a
rough equivalent via call_rcu() and a callback function.
Note, there is a subtle function change as rcu_barrier() doesn't wait on
kvfree_rcu(), but does wait on call_rcu(). Not forcing rcu_barrier() to
wait is safe and desirable in this case, as KVM doesn't care when an old
map is actually freed. In fact, using kvfree_rcu() fixes a largely
theoretical use-after-free. Because KVM _doesn't_ do rcu_barrier() to
wait for kvm_apic_map_free() to complete, if KVM-the-module is unloaded in
the RCU grace period before kvm_apic_map_free() is invoked, KVM's callback
could run after module unload.
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Reviewed-by: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Link: https://lore.kernel.org/r/20250122073456.2950-1-lirongqing@baidu.com
[sean: rework changelog, call out rcu_barrier() interaction]
Signed-off-by: Sean Christopherson <seanjc@google.com>
When updating the emulated PIC IRQ status, set "wakeup_needed" if and only
if a new interrupt was found, i.e. if the incoming level is non-zero and
an IRQ is being raised. The bug is relatively benign, as KVM will signal
a spurious wakeup, e.g. set KVM_REQ_EVENT and kick target vCPUs, but KVM
will never actually inject a spurious IRQ as kvm_cpu_has_extint() cares
only about the "output" field.
Fixes: 7049467b53 ("KVM: remove isr_ack logic from PIC")
Signed-off-by: Liam Ni <zhiguangni01@gmail.com>
Link: https://lore.kernel.org/r/CACZJ9cX2R_=qgvLdaqbB_DUJhv08c674b67Ln_Qb9yyVwgE16w@mail.gmail.com
[sean: reconstruct patch, rewrite changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Move the conditional loading of hardware DR6 with the guest's DR6 value
out of the core .vcpu_run() loop to fix a bug where KVM can load hardware
with a stale vcpu->arch.dr6.
When the guest accesses a DR and host userspace isn't debugging the guest,
KVM disables DR interception and loads the guest's values into hardware on
VM-Enter and saves them on VM-Exit. This allows the guest to access DRs
at will, e.g. so that a sequence of DR accesses to configure a breakpoint
only generates one VM-Exit.
For DR0-DR3, the logic/behavior is identical between VMX and SVM, and also
identical between KVM_DEBUGREG_BP_ENABLED (userspace debugging the guest)
and KVM_DEBUGREG_WONT_EXIT (guest using DRs), and so KVM handles loading
DR0-DR3 in common code, _outside_ of the core kvm_x86_ops.vcpu_run() loop.
But for DR6, the guest's value doesn't need to be loaded into hardware for
KVM_DEBUGREG_BP_ENABLED, and SVM provides a dedicated VMCB field whereas
VMX requires software to manually load the guest value, and so loading the
guest's value into DR6 is handled by {svm,vmx}_vcpu_run(), i.e. is done
_inside_ the core run loop.
Unfortunately, saving the guest values on VM-Exit is initiated by common
x86, again outside of the core run loop. If the guest modifies DR6 (in
hardware, when DR interception is disabled), and then the next VM-Exit is
a fastpath VM-Exit, KVM will reload hardware DR6 with vcpu->arch.dr6 and
clobber the guest's actual value.
The bug shows up primarily with nested VMX because KVM handles the VMX
preemption timer in the fastpath, and the window between hardware DR6
being modified (in guest context) and DR6 being read by guest software is
orders of magnitude larger in a nested setup. E.g. in non-nested, the
VMX preemption timer would need to fire precisely between #DB injection
and the #DB handler's read of DR6, whereas with a KVM-on-KVM setup, the
window where hardware DR6 is "dirty" extends all the way from L1 writing
DR6 to VMRESUME (in L1).
L1's view:
==========
<L1 disables DR interception>
CPU 0/KVM-7289 [023] d.... 2925.640961: kvm_entry: vcpu 0
A: L1 Writes DR6
CPU 0/KVM-7289 [023] d.... 2925.640963: <hack>: Set DRs, DR6 = 0xffff0ff1
B: CPU 0/KVM-7289 [023] d.... 2925.640967: kvm_exit: vcpu 0 reason EXTERNAL_INTERRUPT intr_info 0x800000ec
D: L1 reads DR6, arch.dr6 = 0
CPU 0/KVM-7289 [023] d.... 2925.640969: <hack>: Sync DRs, DR6 = 0xffff0ff0
CPU 0/KVM-7289 [023] d.... 2925.640976: kvm_entry: vcpu 0
L2 reads DR6, L1 disables DR interception
CPU 0/KVM-7289 [023] d.... 2925.640980: kvm_exit: vcpu 0 reason DR_ACCESS info1 0x0000000000000216
CPU 0/KVM-7289 [023] d.... 2925.640983: kvm_entry: vcpu 0
CPU 0/KVM-7289 [023] d.... 2925.640983: <hack>: Set DRs, DR6 = 0xffff0ff0
L2 detects failure
CPU 0/KVM-7289 [023] d.... 2925.640987: kvm_exit: vcpu 0 reason HLT
L1 reads DR6 (confirms failure)
CPU 0/KVM-7289 [023] d.... 2925.640990: <hack>: Sync DRs, DR6 = 0xffff0ff0
L0's view:
==========
L2 reads DR6, arch.dr6 = 0
CPU 23/KVM-5046 [001] d.... 3410.005610: kvm_exit: vcpu 23 reason DR_ACCESS info1 0x0000000000000216
CPU 23/KVM-5046 [001] ..... 3410.005610: kvm_nested_vmexit: vcpu 23 reason DR_ACCESS info1 0x0000000000000216
L2 => L1 nested VM-Exit
CPU 23/KVM-5046 [001] ..... 3410.005610: kvm_nested_vmexit_inject: reason: DR_ACCESS ext_inf1: 0x0000000000000216
CPU 23/KVM-5046 [001] d.... 3410.005610: kvm_entry: vcpu 23
CPU 23/KVM-5046 [001] d.... 3410.005611: kvm_exit: vcpu 23 reason VMREAD
CPU 23/KVM-5046 [001] d.... 3410.005611: kvm_entry: vcpu 23
CPU 23/KVM-5046 [001] d.... 3410.005612: kvm_exit: vcpu 23 reason VMREAD
CPU 23/KVM-5046 [001] d.... 3410.005612: kvm_entry: vcpu 23
L1 writes DR7, L0 disables DR interception
CPU 23/KVM-5046 [001] d.... 3410.005612: kvm_exit: vcpu 23 reason DR_ACCESS info1 0x0000000000000007
CPU 23/KVM-5046 [001] d.... 3410.005613: kvm_entry: vcpu 23
L0 writes DR6 = 0 (arch.dr6)
CPU 23/KVM-5046 [001] d.... 3410.005613: <hack>: Set DRs, DR6 = 0xffff0ff0
A: <L1 writes DR6 = 1, no interception, arch.dr6 is still '0'>
B: CPU 23/KVM-5046 [001] d.... 3410.005614: kvm_exit: vcpu 23 reason PREEMPTION_TIMER
CPU 23/KVM-5046 [001] d.... 3410.005614: kvm_entry: vcpu 23
C: L0 writes DR6 = 0 (arch.dr6)
CPU 23/KVM-5046 [001] d.... 3410.005614: <hack>: Set DRs, DR6 = 0xffff0ff0
L1 => L2 nested VM-Enter
CPU 23/KVM-5046 [001] d.... 3410.005616: kvm_exit: vcpu 23 reason VMRESUME
L0 reads DR6, arch.dr6 = 0
Reported-by: John Stultz <jstultz@google.com>
Closes: https://lkml.kernel.org/r/CANDhNCq5_F3HfFYABqFGCA1bPd_%2BxgNj-iDQhH4tDk%2Bwi8iZZg%40mail.gmail.com
Fixes: 375e28ffc0 ("KVM: X86: Set host DR6 only on VMX and for KVM_DEBUGREG_WONT_EXIT")
Fixes: d67668e9dd ("KVM: x86, SVM: isolate vcpu->arch.dr6 from vmcb->save.dr6")
Cc: stable@vger.kernel.org
Cc: Jim Mattson <jmattson@google.com>
Tested-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/r/20250125011833.3644371-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
When preparing vmcb02 for nested VMRUN (or state restore), "enter" guest
mode prior to initializing the MMU for nested NPT so that guest_mode is
set in the MMU's role. KVM's model is that all L2 MMUs are tagged with
guest_mode, as the behavior of hypervisor MMUs tends to be significantly
different than kernel MMUs.
Practically speaking, the bug is relatively benign, as KVM only directly
queries role.guest_mode in kvm_mmu_free_guest_mode_roots() and
kvm_mmu_page_ad_need_write_protect(), which SVM doesn't use, and in paths
that are optimizations (mmu_page_zap_pte() and
shadow_mmu_try_split_huge_pages()).
And while the role is incorprated into shadow page usage, because nested
NPT requires KVM to be using NPT for L1, reusing shadow pages across L1
and L2 is impossible as L1 MMUs will always have direct=1, while L2 MMUs
will have direct=0.
Hoist the TLB processing and setting of HF_GUEST_MASK to the beginning
of the flow instead of forcing guest_mode in the MMU, as nothing in
nested_vmcb02_prepare_control() between the old and new locations touches
TLB flush requests or HF_GUEST_MASK, i.e. there's no reason to present
inconsistent vCPU state to the MMU.
Fixes: 69cb877487 ("KVM: nSVM: move MMU setup to nested_prepare_vmcb_control")
Cc: stable@vger.kernel.org
Reported-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Reviewed-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Link: https://lore.kernel.org/r/20250130010825.220346-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Advertise support for Hyper-V's SEND_IPI and SEND_IPI_EX hypercalls if and
only if the local API is emulated/virtualized by KVM, and explicitly reject
said hypercalls if the local APIC is emulated in userspace, i.e. don't rely
on userspace to opt-in to KVM_CAP_HYPERV_ENFORCE_CPUID.
Rejecting SEND_IPI and SEND_IPI_EX fixes a NULL-pointer dereference if
Hyper-V enlightenments are exposed to the guest without an in-kernel local
APIC:
dump_stack+0xbe/0xfd
__kasan_report.cold+0x34/0x84
kasan_report+0x3a/0x50
__apic_accept_irq+0x3a/0x5c0
kvm_hv_send_ipi.isra.0+0x34e/0x820
kvm_hv_hypercall+0x8d9/0x9d0
kvm_emulate_hypercall+0x506/0x7e0
__vmx_handle_exit+0x283/0xb60
vmx_handle_exit+0x1d/0xd0
vcpu_enter_guest+0x16b0/0x24c0
vcpu_run+0xc0/0x550
kvm_arch_vcpu_ioctl_run+0x170/0x6d0
kvm_vcpu_ioctl+0x413/0xb20
__se_sys_ioctl+0x111/0x160
do_syscal1_64+0x30/0x40
entry_SYSCALL_64_after_hwframe+0x67/0xd1
Note, checking the sending vCPU is sufficient, as the per-VM irqchip_mode
can't be modified after vCPUs are created, i.e. if one vCPU has an
in-kernel local APIC, then all vCPUs have an in-kernel local APIC.
Reported-by: Dongjie Zou <zoudongjie@huawei.com>
Fixes: 214ff83d44 ("KVM: x86: hyperv: implement PV IPI send hypercalls")
Fixes: 2bc39970e9 ("x86/kvm/hyper-v: Introduce KVM_GET_SUPPORTED_HV_CPUID")
Cc: stable@vger.kernel.org
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20250118003454.2619573-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add open_tree_attr() which allow to atomically create a detached mount
tree and set mount options on it. If OPEN_TREE_CLONE is used this will
allow the creation of a detached mount with a new set of mount options
without it ever being exposed to userspace without that set of mount
options applied.
Link: https://lore.kernel.org/r/20250128-work-mnt_idmap-update-v2-v1-3-c25feb0d2eb3@kernel.org
Reviewed-by: "Seth Forshee (DigitalOcean)" <sforshee@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
For Linux, running in Hyper-V VTL (Virtual Trust Level), kernel in VTL2
tries to access VTL0 low memory in probe_roms. This memory is not
described in the e820 map. Initialize probe_roms call to no-ops
during boot for VTL2 kernel to avoid this. The issue got identified
in OpenVMM which detects invalid accesses initiated from kernel running
in VTL2.
Co-developed-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Signed-off-by: Naman Jain <namjain@linux.microsoft.com>
Tested-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Roman Kisel <romank@linux.microsoft.com>
Link: https://lore.kernel.org/r/20250116061224.1701-1-namjain@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20250116061224.1701-1-namjain@linux.microsoft.com>
The kernel's initcall infrastructure lacks the ability to express
dependencies between initcalls, whereas the modules infrastructure
automatically handles dependencies via symbol loading. Ensure the
PSP SEV driver is initialized before proceeding in sev_hardware_setup()
if KVM is built-in as the dependency isn't handled by the initcall
infrastructure.
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Link: https://lore.kernel.org/r/f78ddb64087df27e7bcb1ae0ab53f55aa0804fab.1739226950.git.ashish.kalra@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Simplify code by replacing &to_kvm_svm(kvm)->sev_info with
to_kvm_sev_info() helper function. Wherever possible, drop the local
variable declaration and directly use the helper instead.
No functional changes.
Signed-off-by: Nikunj A Dadhania <nikunj@amd.com>
Reviewed-by: Pavan Kumar Paluri <papaluri@amd.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Link: https://lore.kernel.org/r/20250123055140.144378-1-nikunj@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
In [1] the meaning of the synthetic IBPB flags has been redefined for a
better separation of concerns:
- ENTRY_IBPB -- issue IBPB on entry only
- IBPB_ON_VMEXIT -- issue IBPB on VM-Exit only
and the Retbleed mitigations have been updated to match this new
semantics.
Commit [2] was merged shortly before [1], and their interaction was not
handled properly. This resulted in IBPB not being triggered on VM-Exit
in all SRSO mitigation configs requesting an IBPB there.
Specifically, an IBPB on VM-Exit is triggered only when
X86_FEATURE_IBPB_ON_VMEXIT is set. However:
- X86_FEATURE_IBPB_ON_VMEXIT is not set for "spec_rstack_overflow=ibpb",
because before [1] having X86_FEATURE_ENTRY_IBPB was enough. Hence,
an IBPB is triggered on entry but the expected IBPB on VM-exit is
not.
- X86_FEATURE_IBPB_ON_VMEXIT is not set also when
"spec_rstack_overflow=ibpb-vmexit" if X86_FEATURE_ENTRY_IBPB is
already set.
That's because before [1] this was effectively redundant. Hence, e.g.
a "retbleed=ibpb spec_rstack_overflow=bpb-vmexit" config mistakenly
reports the machine still vulnerable to SRSO, despite an IBPB being
triggered both on entry and VM-Exit, because of the Retbleed selected
mitigation config.
- UNTRAIN_RET_VM won't still actually do anything unless
CONFIG_MITIGATION_IBPB_ENTRY is set.
For "spec_rstack_overflow=ibpb", enable IBPB on both entry and VM-Exit
and clear X86_FEATURE_RSB_VMEXIT which is made superfluous by
X86_FEATURE_IBPB_ON_VMEXIT. This effectively makes this mitigation
option similar to the one for 'retbleed=ibpb', thus re-order the code
for the RETBLEED_MITIGATION_IBPB option to be less confusing by having
all features enabling before the disabling of the not needed ones.
For "spec_rstack_overflow=ibpb-vmexit", guard this mitigation setting
with CONFIG_MITIGATION_IBPB_ENTRY to ensure UNTRAIN_RET_VM sequence is
effectively compiled in. Drop instead the CONFIG_MITIGATION_SRSO guard,
since none of the SRSO compile cruft is required in this configuration.
Also, check only that the required microcode is present to effectively
enabled the IBPB on VM-Exit.
Finally, update the KConfig description for CONFIG_MITIGATION_IBPB_ENTRY
to list also all SRSO config settings enabled by this guard.
Fixes: 864bcaa38e ("x86/cpu/kvm: Provide UNTRAIN_RET_VM") [1]
Fixes: d893832d0e ("x86/srso: Add IBPB on VMEXIT") [2]
Reported-by: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Patrick Bellasi <derkling@google.com>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove the "iommu_domain" and "iommu_noncoherent" fields from struct
kvm_arch, which are no longer used since commit ad6260da1e ("KVM: x86:
drop legacy device assignment").
Signed-off-by: Ted Chen <znscnchen@gmail.com>
Link: https://lore.kernel.org/r/20250124075055.97158-1-znscnchen@gmail.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
The Xen hypercall page MSR is write-only. When the guest writes an address
to the MSR, the hypervisor populates the referenced page with hypercall
functions.
There is no reason for the host ever to write to the MSR, and it isn't
even readable.
Allowing host writes to trigger the hypercall page allows userspace to
attack the kernel, as kvm_xen_write_hypercall_page() takes multiple
locks and writes to guest memory. E.g. if userspace sets the MSR to
MSR_IA32_XSS, KVM's write to MSR_IA32_XSS during vCPU creation will
trigger an SRCU violation due to writing guest memory:
=============================
WARNING: suspicious RCU usage
6.13.0-rc3
-----------------------------
include/linux/kvm_host.h:1046 suspicious rcu_dereference_check() usage!
stack backtrace:
CPU: 6 UID: 1000 PID: 1101 Comm: repro Not tainted 6.13.0-rc3
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
Call Trace:
<TASK>
dump_stack_lvl+0x7f/0x90
lockdep_rcu_suspicious+0x176/0x1c0
kvm_vcpu_gfn_to_memslot+0x259/0x280
kvm_vcpu_write_guest+0x3a/0xa0
kvm_xen_write_hypercall_page+0x268/0x300
kvm_set_msr_common+0xc44/0x1940
vmx_set_msr+0x9db/0x1fc0
kvm_vcpu_reset+0x857/0xb50
kvm_arch_vcpu_create+0x37e/0x4d0
kvm_vm_ioctl+0x669/0x2100
__x64_sys_ioctl+0xc1/0xf0
do_syscall_64+0xc5/0x210
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7feda371b539
While the MSR index isn't strictly ABI, i.e. can theoretically float to
any value, in practice no known VMM sets the MSR index to anything other
than 0x40000000 or 0x40000200.
Reported-by: syzbot+cdeaeec70992eca2d920@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/679258d4.050a0220.2eae65.000a.GAE@google.com
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Link: https://lore.kernel.org/r/de0437379dfab11e431a23c8ce41a29234c06cbf.camel@infradead.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Currently WARN_ON_FPU evaluates its argument even if
CONFIG_X86_DEBUG_FPU is disabled, which adds unnecessary instructions to
several functions, for example kernel_fpu_begin(). Fix this by using
BUILD_BUG_ON_INVALID(x) in the no-debug case rather than (void)(x).
Fixes: 83242c5158 ("x86/fpu: Make WARN_ON_FPU() more robust in the !CONFIG_X86_DEBUG_FPU case")
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20250127224523.94300-1-ebiggers%40kernel.org
Instantiate crc-pclmul-template.S for crc32_le, and delete the original
PCLMULQDQ optimized implementation. This has the following advantages:
- Less CRC-variant-specific code.
- VPCLMULQDQ support, greatly improving performance on sufficiently long
messages on newer CPUs.
- A faster reduction from 128 bits to the final CRC.
- Support for lengths not a multiple of 16 bytes, improving performance
for such lengths.
- Support for misaligned buffers, improving performance in such cases.
Benchmark results on AMD Ryzen 9 9950X (Zen 5) using crc_kunit:
Length Before After
------ ------ -----
1 427 MB/s 605 MB/s
16 710 MB/s 3631 MB/s
64 704 MB/s 7615 MB/s
127 3610 MB/s 9710 MB/s
128 8759 MB/s 12702 MB/s
200 7083 MB/s 15343 MB/s
256 17284 MB/s 22904 MB/s
511 10919 MB/s 27309 MB/s
512 19849 MB/s 48900 MB/s
1024 21216 MB/s 62630 MB/s
3173 22150 MB/s 72437 MB/s
4096 22496 MB/s 79593 MB/s
16384 22018 MB/s 85106 MB/s
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20250210174540.161705-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
The Linux kernel implements many variants of CRC, such as crc16,
crc_t10dif, crc32_le, crc32c, crc32_be, crc64_nvme, and crc64_be. On
x86, except for crc32c which has special scalar instructions, the
fastest way to compute any of these CRCs on any message of length
roughly >= 16 bytes is to use the SIMD carryless multiplication
instructions PCLMULQDQ or VPCLMULQDQ. Depending on the available CPU
features this can mean PCLMULQDQ+SSE4.1, VPCLMULQDQ+AVX2,
VPCLMULQDQ+AVX10/256, or VPCLMULQDQ+AVX10/512 (or the AVX512 equivalents
to AVX10/*). This results in a total of 20+ CRC implementations being
potentially needed to properly optimize all CRCs that someone cares
about for x86. Besides crc32c, currently only crc32_le and crc_t10dif
are actually optimized for x86, and they only use PCLMULQDQ, which means
they can be 2-4x slower than what is possible with VPCLMULQDQ.
Fortunately, at a high level the code that is needed for any
[V]PCLMULQDQ based CRC implementation is mostly the same. Therefore,
this patch introduces an assembly macro that expands into the body of a
[V]PCLMULQDQ based CRC function for a given number of bits (8, 16, 32,
or 64), bit order (lsb or msb-first), vector length, and AVX level.
The function expects to be passed a constants table, specific to the
polynomial desired, that was generated by the script previously added.
When two CRC variants share the same number of bits and bit order, the
same functions can be reused, with only the constants table differing.
A new C header is also added to make it easy to integrate the new
assembly code using a static call.
The result is that it becomes straightforward to wire up an optimized
implementation of any CRC-8, CRC-16, CRC-32, or CRC-64 for x86. Later
patches will wire up specific CRC variants.
Although this new template allows easily generating many functions, care
was taken to still keep the binary size fairly low. Each generated
function is only 550 to 850 bytes depending on the CRC variant and
target CPU features. And only one function per CRC variant is actually
used at runtime (since all functions support all lengths >= 16 bytes).
Note that a similar approach should also work for other architectures
that have carryless multiplication instructions, such as arm64.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20250210174540.161705-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Lift zmm_exclusion_list in aesni-intel_glue.c into the x86 CPU setup
code, and add a new x86 CPU feature flag X86_FEATURE_PREFER_YMM that is
set when the CPU is on this list.
This allows other code in arch/x86/, such as the CRC library code, to
apply the same exclusion list when deciding whether to execute 256-bit
or 512-bit optimized functions.
Note that full AVX512 support including ZMM registers is still exposed
to userspace and is still supported for in-kernel use. This flag just
indicates whether in-kernel code should prefer to use YMM registers.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20250210174540.161705-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
* Correctly clean the BSS to the PoC before allowing EL2 to access it
on nVHE/hVHE/protected configurations
* Propagate ownership of debug registers in protected mode after
the rework that landed in 6.14-rc1
* Stop pretending that we can run the protected mode without a GICv3
being present on the host
* Fix a use-after-free situation that can occur if a vcpu fails to
initialise the NV shadow S2 MMU contexts
* Always evaluate the need to arm a background timer for fully emulated
guest timers
* Fix the emulation of EL1 timers in the absence of FEAT_ECV
* Correctly handle the EL2 virtual timer, specially when HCR_EL2.E2H==0
s390:
* move some of the guest page table (gmap) logic into KVM itself,
inching towards the final goal of completely removing gmap from the
non-kvm memory management code. As an initial set of cleanups, move
some code from mm/gmap into kvm and start using __kvm_faultin_pfn()
to fault-in pages as needed; but especially stop abusing page->index
and page->lru to aid in the pgdesc conversion.
x86:
* Add missing check in the fix to defer starting the huge page recovery
vhost_task
* SRSO_USER_KERNEL_NO does not need SYNTHESIZED_F
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmemTnEUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroP97gf/Rew+yEsRrHVk/j0R2XwFx51raYZy
eaicv07jYmwsnaALq6BEj4xxDW8dJEJgj05Czm1o9+9x8nvY2+UjT2q4J8fY9xdD
Yr+5GvEEz4x2GNL3ZYE3iHTNFQckNxOgMilLW3br1E+wjusShKmgGxPYTRyClQ34
gDBZQWzOG22UNC6PbW9dgTK54b57+NJdIZYuHz4LkMsTvzf6jXo5VumsgbbZqC4e
VGh5EUEPL7+cNzGY/+WURXI6OojdPzbneH1NP82uT3lo2WaHK9+B3N6H+W71N/T4
u1P7+g0WmdNj3FITvDpTJ7jNhke2atEjI9rvtHz6gwtf9SIujyuNl55uRA==
=r0h9
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Correctly clean the BSS to the PoC before allowing EL2 to access it
on nVHE/hVHE/protected configurations
- Propagate ownership of debug registers in protected mode after the
rework that landed in 6.14-rc1
- Stop pretending that we can run the protected mode without a GICv3
being present on the host
- Fix a use-after-free situation that can occur if a vcpu fails to
initialise the NV shadow S2 MMU contexts
- Always evaluate the need to arm a background timer for fully
emulated guest timers
- Fix the emulation of EL1 timers in the absence of FEAT_ECV
- Correctly handle the EL2 virtual timer, specially when HCR_EL2.E2H==0
s390:
- move some of the guest page table (gmap) logic into KVM itself,
inching towards the final goal of completely removing gmap from the
non-kvm memory management code.
As an initial set of cleanups, move some code from mm/gmap into kvm
and start using __kvm_faultin_pfn() to fault-in pages as needed;
but especially stop abusing page->index and page->lru to aid in the
pgdesc conversion.
x86:
- Add missing check in the fix to defer starting the huge page
recovery vhost_task
- SRSO_USER_KERNEL_NO does not need SYNTHESIZED_F"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (31 commits)
KVM: x86/mmu: Ensure NX huge page recovery thread is alive before waking
KVM: remove kvm_arch_post_init_vm
KVM: selftests: Fix spelling mistake "initally" -> "initially"
kvm: x86: SRSO_USER_KERNEL_NO is not synthesized
KVM: arm64: timer: Don't adjust the EL2 virtual timer offset
KVM: arm64: timer: Correctly handle EL1 timer emulation when !FEAT_ECV
KVM: arm64: timer: Always evaluate the need for a soft timer
KVM: arm64: Fix nested S2 MMU structures reallocation
KVM: arm64: Fail protected mode init if no vgic hardware is present
KVM: arm64: Flush/sync debug state in protected mode
KVM: s390: selftests: Streamline uc_skey test to issue iske after sske
KVM: s390: remove the last user of page->index
KVM: s390: move PGSTE softbits
KVM: s390: remove useless page->index usage
KVM: s390: move gmap_shadow_pgt_lookup() into kvm
KVM: s390: stop using lists to keep track of used dat tables
KVM: s390: stop using page->index for non-shadow gmaps
KVM: s390: move some gmap shadowing functions away from mm/gmap.c
KVM: s390: get rid of gmap_translate()
KVM: s390: get rid of gmap_fault()
...
With the "crct10dif" algorithm having been removed from the crypto API,
crc_t10dif_is_optimized() is no longer used.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250208175647.12333-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Remove 32-bit support from the fast path in xts_crypt(). Then optimize
it for 64-bit, and simplify the code, by switching to sg_virt() and
removing the now-unnecessary checks for crossing a page boundary.
The result is simpler code that is slightly smaller and faster in the
case that actually matters (64-bit).
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Following the standardization on crc32c() as the lib entry point for the
Castagnoli CRC32 instead of the previous mix of crc32c(), crc32c_le(),
and __crc32c_le(), make the same change to the underlying base and arch
functions that implement it.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250208024911.14936-7-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
GCC changing the default C version that is overriden
in the main Makefile but not in the x86 boot code
Makefile.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=x1bT
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2025-02-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Ingo Molnar:
"Fix a build regression on GCC 15 builds, caused by GCC changing the
default C version that is overriden in the main Makefile but not in
the x86 boot code Makefile"
* tag 'x86-urgent-2025-02-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot: Use '-std=gnu11' to fix build with GCC 15
Explicitly clear DEBUGCTL.LBR when a CPU is starting, prior to purging the
LBR MSRs themselves, as at least one system has been found to transfer
control to the kernel with LBRs enabled (it's unclear whether it's a BIOS
flaw or a CPU goof). Because the kernel preserves the original DEBUGCTL,
even when toggling LBRs, leaving DEBUGCTL.LBR as is results in running
with LBRs enabled at all times.
Closes: https://lore.kernel.org/all/c9d8269bff69f6359731d758e3b1135dedd7cc61.camel@redhat.com
Reported-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20250131010721.470503-1-seanjc@google.com
The EAX of the CPUID Leaf 023H enumerates the mask of valid sub-leaves.
To tell the availability of the sub-leaf 1 (enumerate the counter mask),
perf should check the bit 1 (0x2) of EAS, rather than bit 0 (0x1).
The error is not user-visible on bare metal. Because the sub-leaf 0 and
the sub-leaf 1 are always available. However, it may bring issues in a
virtualization environment when a VMM only enumerates the sub-leaf 0.
Introduce the cpuid35_e?x to replace the macros, which makes the
implementation style consistent.
Fixes: eb467aaac2 ("perf/x86/intel: Support Architectural PerfMon Extension leaf")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20250129154820.3755948-3-kan.liang@linux.intel.com
The PEBS-via-PT feature is exposed for the e-core of some hybrid
platforms, e.g., ADL and MTL. But it never works.
$ dmesg | grep PEBS
[ 1.793888] core: cpu_atom PMU driver: PEBS-via-PT
$ perf record -c 1000 -e '{intel_pt/branch=0/,
cpu_atom/cpu-cycles,aux-output/pp}' -C8
Error:
The sys_perf_event_open() syscall returned with 22 (Invalid argument)
for event (cpu_atom/cpu-cycles,aux-output/pp).
"dmesg | grep -i perf" may provide additional information.
The "PEBS-via-PT" is printed if the corresponding bit of per-PMU
capabilities is set. Since the feature is supported by the e-core HW,
perf sets the bit for e-core. However, for Intel PT, if a feature is not
supported on all CPUs, it is not supported at all. The PEBS-via-PT event
cannot be created successfully.
The PEBS-via-PT is no longer enumerated on the latest hybrid platform. It
will be deprecated on future platforms with Arch PEBS. Let's remove it
from the existing hybrid platforms.
Fixes: d9977c43bf ("perf/x86: Register hybrid PMUs")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250129154820.3755948-2-kan.liang@linux.intel.com
After the commit b4943b8bfc ("perf/x86/rapl: Add core energy counter
support for AMD CPUs"), the default "perf record"/"perf top" command is
broken in systems where there isn't a PMU registered for type
PERF_TYPE_RAW.
This is due to the change in order of error checks in rapl_pmu_event_init()
Due to which we return -EINVAL instead of -ENOENT, when we reach here from
the fallback loop in perf_init_event().
Move the "PMU and event type match" back to the beginning of the function
so that we return -ENOENT early on.
Closes: https://lore.kernel.org/all/uv7mz6vew2bzgre5jdpmwldxljp5djzmuiksqdcdwipfm4zm7w@ribobcretidk/
Fixes: b4943b8bfc ("perf/x86/rapl: Add core energy counter support for AMD CPUs")
Reported-by: Koichiro Den <koichiro.den@canonical.com>
Signed-off-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250129080513.30353-1-dhananjay.ugwekar@amd.com
When CONFIG_X86_32 is defined and CONFIG_UML is not defined,
vdso_enabled belongs to arch/x86/entry/vdso/vdso32-setup.c.
So, move it into its own file.
Before this patch, vdso_enabled was allowed to be set to
a value exceeding 1 on x86_32 architecture. After this patch is
applied, vdso_enabled is not permitted to set the value more than 1.
It does not matter, because according to the function load_vdso32(),
only vdso_enabled is set to 1, VDSO would be enabled. Other values
all mean "disabled". The same limitation could be seen in the
function vdso32_setup().
Signed-off-by: Kaixiong Yu <yukaixiong@huawei.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCZ6Ti7AAKCRCAXGG7T9hj
vqTVAP4iQCeMzxPJoHteWm9ihOyIpHZ+5Kimhle/irUmAYC5OwD/St7EdmY3MiZd
sMRNrW3dFBvOQkgnysRw7OOaP8GUfgY=
=DT9D
-----END PGP SIGNATURE-----
Merge tag 'for-linus-6.14-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"Three fixes for xen_hypercall_hvm() that was introduced in the 6.13
cycle"
* tag 'for-linus-6.14-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen: remove unneeded dummy push from xen_hypercall_hvm()
x86/xen: add FRAME_END to xen_hypercall_hvm()
x86/xen: fix xen_hypercall_hvm() to not clobber %rbx
This is a preparatory patch for when pointers have tags in their
upper address bits. But it's a harmless change on its own.
The mm->pgd virtual address may be tagged because it came out of
the allocator at some point. The __va(read_cr3_pa()) address will
never be tagged (the tag bits are all 1's). A direct pointer value
comparison would fail if one is tagged and the other is not.
To fix this, just compare the physical addresses which are never
affected by tagging.
[ dhansen: subject and changelog munging ]
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/fde443d0e67f76a51e7ab4e96647705840f53ddb.1738686764.git.maciej.wieczor-retman%40intel.com
Currently, mwait_play_dead_cpuid_hint() looks up the MWAIT hint of the
deepest idle state by inspecting CPUID leaf 0x5 with the assumption
that, if the number of sub-states for a given major C-state is nonzero,
those sub-states are always represented by consecutive numbers starting
from 0. This assumption is not based on the documented platform behavior
and in fact it is not met on recent Intel platforms.
For example, Intel's Sierra Forest report two C-states with two
substates each in cpuid leaf 0x5:
Name* target cstate target subcstate (mwait hint)
===========================================================
C1 0x00 0x00
C1E 0x00 0x01
-- 0x10 ----
C6S 0x20 0x22
C6P 0x20 0x23
-- 0x30 ----
/* No more (sub)states all the way down to the end. */
===========================================================
* Names of the cstates are not included in the CPUID leaf 0x5,
they are taken from the product specific documentation.
Notice that hints 0x20 and 0x21 are not defined for C-state 0x20
(C6), so the existing MWAIT hint lookup in
mwait_play_dead_cpuid_hint() based on the CPUID leaf 0x5 contents does
not work in this case.
Instead of using MWAIT hint lookup that is not guaranteed to work,
make native_play_dead() rely on the idle driver for the given platform
to put CPUs going offline into appropriate idle state and, if that
fails, fall back to hlt_play_dead().
Accordingly, drop mwait_play_dead_cpuid_hint() altogether and make
native_play_dead() call cpuidle_play_dead() instead of it
unconditionally with the assumption that it will not return if it is
successful. Still, in case cpuidle_play_dead() fails, call
hlt_play_dead() at the end.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/all/20250205155211.329780-5-artem.bityutskiy%40linux.intel.com
Recent Intel platforms will depend on the idle driver to pass the
correct hint for playing dead via mwait_play_dead_with_hint(). Expand
the existing enter_dead interface with handling for FFH states and pass
the MWAIT hint to the mwait_play_dead code.
Suggested-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/all/20250205155211.329780-3-artem.bityutskiy%40linux.intel.com
Introduce a helper function to allow offlined CPUs to enter idle states
with a specific MWAIT hint. The new helper will be used in subsequent
patches by the acpi_idle and intel_idle drivers.
No functional change intended.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/all/20250205155211.329780-2-artem.bityutskiy%40linux.intel.com
Stack alignment of the kernel in 64-bit mode is 8, not 16, so the
dummy push in xen_hypercall_hvm() for aligning the stack to 16 bytes
can be removed.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
xen_hypercall_hvm() is missing a FRAME_END at the end, add it.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202502030848.HTNTTuo9-lkp@intel.com/
Fixes: b4845bb638 ("x86/xen: add central hypercall functions")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
xen_hypercall_hvm(), which is used when running as a Xen PVH guest at
most only once during early boot, is clobbering %rbx. Depending on
whether the caller relies on %rbx to be preserved across the call or
not, this clobbering might result in an early crash of the system.
This can be avoided by using an already saved register instead of %rbx.
Fixes: b4845bb638 ("x86/xen: add central hypercall functions")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
The counters snapshotting is a new adaptive PEBS extension, which can
capture programmable counters, fixed-function counters, and performance
metrics in a PEBS record. The feature is available in the PEBS format
V6.
The target counters can be configured in the new fields of MSR_PEBS_CFG.
Then the PEBS HW will generate the bit mask of counters (Counters Group
Header) followed by the content of all the requested counters into a
PEBS record.
The current Linux perf sample read feature can read all events in the
group when any event in the group is overflowed. But the rdpmc in the
NMI/overflow handler has a small gap from overflow. Also, there is some
overhead for each rdpmc read. The counters snapshotting feature can be
used as an accurate and low-overhead replacement.
Extend intel_update_topdown_event() to accept the value from PEBS
records.
Add a new PEBS_CNTR flag to indicate a sample read group that utilizes
the counters snapshotting feature. When the group is scheduled, the
PEBS configure can be updated accordingly.
To prevent the case that a PEBS record value might be in the past
relative to what is already in the event, perf always stops the PMU and
drains the PEBS buffer before updating the corresponding event->count.
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250121152303.3128733-4-kan.liang@linux.intel.com
The WARN_ON(this_cpu_read(cpu_hw_events.enabled)) in the
intel_pmu_save_and_restart_reload() is triggered, when sampling read
topdown events.
In a NMI handler, the cpu_hw_events.enabled is set and used to indicate
the status of core PMU. The generic pmu->pmu_disable_count, updated in
the perf_pmu_disable/enable pair, is not touched.
However, the perf_pmu_disable/enable pair is invoked when sampling read
in a NMI handler. The cpuc->enabled is mistakenly set by the
perf_pmu_enable().
Avoid disabling PMU if the core PMU is already disabled.
Merge the logic together.
Fixes: 7b2c05a15d ("perf/x86/intel: Generic support for hardware TopDown metrics")
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20250121152303.3128733-2-kan.liang@linux.intel.com
The x86_pmu_drain_pebs static call was introduced in commit 7c9903c9bf
("x86/perf, static_call: Optimize x86_pmu methods"), but it's not really
used to replace the old method.
Apply the static call for drain_pebs.
Fixes: 7c9903c9bf ("x86/perf, static_call: Optimize x86_pmu methods")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20250121152303.3128733-1-kan.liang@linux.intel.com
This CPU was mistakenly given the name INTEL_ATOM_AIRMONT_MID. But it
uses a Silvermont core, not Airmont.
Change #define name to INTEL_ATOM_SILVERMONT_MID2
Reported-by: Christian Ludloff <ludloff@gmail.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20241007165701.19693-1-tony.luck%40intel.com
When waking a VM's NX huge page recovery thread, ensure the thread is
actually alive before trying to wake it. Now that the thread is spawned
on-demand during KVM_RUN, a VM without a recovery thread is reachable via
the related module params.
BUG: kernel NULL pointer dereference, address: 0000000000000040
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:vhost_task_wake+0x5/0x10
Call Trace:
<TASK>
set_nx_huge_pages+0xcc/0x1e0 [kvm]
param_attr_store+0x8a/0xd0
module_attr_store+0x1a/0x30
kernfs_fop_write_iter+0x12f/0x1e0
vfs_write+0x233/0x3e0
ksys_write+0x60/0xd0
do_syscall_64+0x5b/0x160
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7f3b52710104
</TASK>
Modules linked in: kvm_intel kvm
CR2: 0000000000000040
Fixes: 931656b9e2 ("kvm: defer huge page recovery vhost task to later")
Cc: stable@vger.kernel.org
Cc: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250124234623.3609069-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The only statement in a kvm_arch_post_init_vm implementation
can be moved into the x86 kvm_arch_init_vm. Do so and remove all
traces from architecture-independent code.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SYNTHESIZED_F() generally is used together with setup_force_cpu_cap(),
i.e. when it makes sense to present the feature even if cpuid does not
have it *and* the VM is not able to see the difference. For example,
it can be used when mitigations on the host automatically protect
the guest as well.
The "SYNTHESIZED_F(SRSO_USER_KERNEL_NO)" line came in as a conflict
resolution between the CPUID overhaul from the KVM tree and support
for the feature in the x86 tree. Using it right now does not hurt,
or make a difference for that matter, because there is no
setup_force_cpu_cap(X86_FEATURE_SRSO_USER_KERNEL_NO). However, it
is a little less future proof in case such a setup_force_cpu_cap()
appears later, for a case where the kernel somehow is not vulnerable
but the guest would have to apply the mitigation.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The sample_period needs to be recalibrated after every sample to match
the desired sampling freq for a 'freq mode event'. Since the next
sample_period is calculated by generic kernel, PMU specific constraints
are not (explicitly) reckoned.
The sample_period value is programmed in a MaxCnt field of IBS PMUs, and
the MaxCnt field has following constraints:
1) MaxCnt must be multiple of 0x10.
Kernel keeps track of residual / over-counted period into period_left,
which should take care of this constraint by programming MaxCnt with
(sample_period & ~0xF) and adding remaining period into the next sample.
2) MaxCnt must be >= 0x10 for IBS Fetch PMU and >= 0x90 for IBS Op PMU.
Currently, IBS PMU driver allows sample_period below min_period, which
is an undefined HW behavior. Reset sample_period to min_period whenever
it's less than that.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250115054438.1021-9-ravi.bangoria@amd.com
IBS Fetch and IBS Op PMUs have constraints on sample period. The sample
period is verified at the time of opening an event but not at the ioctl()
interface. Hence, a user can open an event with valid period but change
it later with ioctl(). Add a ->check_period() callback to verify the
period provided at ioctl() is also valid.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/r/20250115054438.1021-8-ravi.bangoria@amd.com
0x10 is the minimum sample period for IBS Fetch and 0x90 for IBS Op.
Current IBS PMU driver uses 0x10 for both the PMUs, which is incorrect.
Fix it by adding PMU specific minimum period values in struct perf_ibs.
Also, bail out opening a 'sample period mode' event if the user requested
sample period is less than PMU supported minimum value. For a 'freq mode'
event, start calibrating sample period from PMU specific minimum period.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/r/20250115054438.1021-7-ravi.bangoria@amd.com
Most perf_event_attr->config bits directly maps to IBS_{FETCH|OP}_CTL
MSR. Since the sample period is programmed in these control registers,
IBS PMU driver allows opening an IBS event by setting sample period
value directly in perf_event_attr->config instead of using explicit
perf_event_attr->sample_period interface.
However, this logic is not applicable for freq mode events since the
semantics of control register fields are applicable only to fixed
sample period whereas the freq mode event adjusts sample period after
each and every sample. Currently, IBS driver (unintentionally) allows
creating freq mode event via ->config interface, which is semantically
wrong as well as detrimental because it can be misused to bypass
perf_event_max_sample_rate checks.
Don't allow freq mode event creation through perf_event_attr->config
interface.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/r/20250115054438.1021-6-ravi.bangoria@amd.com
IBS Op uses two counters: MaxCnt and CurCnt. MaxCnt is programmed with
the desired sample period. IBS hw generates sample when CurCnt reaches
to MaxCnt. The size of these counter used to be 20 bits but later they
were extended to 27 bits. The 7 bit extension is indicated by CPUID
Fn8000_001B_EAX[6 / OpCntExt].
perf_ibs->cnt_mask variable contains bit masks for MaxCnt and CurCnt.
But IBS driver does not set upper 7 bits of CurCnt in cnt_mask even
when OpCntExt CPUID bit is set. Fix this.
IBS driver uses cnt_mask[CurCnt] bits only while disabling an event.
Fortunately, CurCnt bits are not read from MSR while re-enabling the
event, instead MaxCnt is programmed with desired period and CurCnt is
set to 0. Hence, we did not see any issues so far.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/r/20250115054438.1021-5-ravi.bangoria@amd.com
Instead of using standard perf_event_attr->freq=0 and ->sample_period
fields, IBS event in 'sample period mode' can also be opened by setting
period value directly in perf_event_attr->config in a MaxCnt bit-field
format.
IBS OP MaxCnt bits are defined as:
(high bits) IbsOpCtl[26:20] = IbsOpMaxCnt[26:20]
(low bits) IbsOpCtl[15:0] = IbsOpMaxCnt[19:4]
Perf event sample period can be derived from MaxCnt bits as:
sample_period = (high bits) | ((low_bits) << 4);
However, current code just masks MaxCnt bits and shifts all of them,
including high bits, which is incorrect. Fix it.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/r/20250115054438.1021-4-ravi.bangoria@amd.com
Valid perf event sample period value for IBS PMUs (Fetch and Op both)
is limited to multiple of 0x10. perf_ibs_init() has this check:
if (!event->attr.sample_freq && hwc->sample_period & 0x0f)
return -EINVAL;
But it's broken since hwc->sample_period will always be 0 when
event->attr.sample_freq is 0 (irrespective of event->attr.freq value.)
One option to fix this is to change the condition:
- if (!event->attr.sample_freq && hwc->sample_period & 0x0f)
+ if (!event->attr.freq && hwc->sample_period & 0x0f)
However, that will break all userspace tools which have been using IBS
event with sample_period not multiple of 0x10.
Another option is to remove the condition altogether and mask lower
nibble _silently_, same as what current code is inadvertently doing.
I'm preferring this approach as it keeps the existing behavior.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/r/20250115054438.1021-3-ravi.bangoria@amd.com
Definition of these macros are very simple and they are used at only one
place. Get rid of unnecessary redirection.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/r/20250115054438.1021-2-ravi.bangoria@amd.com
On the following path, flush_tlb_range() can be used for zapping normal
PMD entries (PMD entries that point to page tables) together with the PTE
entries in the pointed-to page table:
collapse_pte_mapped_thp
pmdp_collapse_flush
flush_tlb_range
The arm64 version of flush_tlb_range() has a comment describing that it can
be used for page table removal, and does not use any last-level
invalidation optimizations. Fix the X86 version by making it behave the
same way.
Currently, X86 only uses this information for the following two purposes,
which I think means the issue doesn't have much impact:
- In native_flush_tlb_multi() for checking if lazy TLB CPUs need to be
IPI'd to avoid issues with speculative page table walks.
- In Hyper-V TLB paravirtualization, again for lazy TLB stuff.
The patch "x86/mm: only invalidate final translations with INVLPGB" which
is currently under review (see
<https://lore.kernel.org/all/20241230175550.4046587-13-riel@surriel.com/>)
would probably be making the impact of this a lot worse.
Fixes: 016c4d92cd ("x86/mm/tlb: Add freed_tables argument to flush_tlb_mm_range")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20250103-x86-collapse-flush-fix-v1-1-3c521856cfa6@google.com
The module code does not create a writable copy of the executable memory
anymore so there is no need to handle it in module relocation and
alternatives patching.
This reverts commit 9bfc4824fd.
Signed-off-by: "Mike Rapoport (Microsoft)" <rppt@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250126074733.1384926-8-rppt@kernel.org
Change of attributes of the pages may lead to fragmentation of direct
mapping over time and performance degradation when these pages contain
executable code.
With current code it's one way road: kernel tries to avoid splitting
large pages, but it doesn't restore them back even if page attributes
got compatible again.
Any change to the mapping may potentially allow to restore large page.
Add a hook to cpa_flush() path that will check if the pages in the range
that were just touched can be mapped at PMD level. If the collapse at the
PMD level succeeded, also attempt to collapse PUD level.
The collapse logic runs only when a set_memory_ method explicitly sets
CPA_COLLAPSE flag, for now this is only enabled in set_memory_rox().
CPUs don't like[1] to have to have TLB entries of different size for the
same memory, but looks like it's okay as long as these entries have
matching attributes[2]. Therefore it's critical to flush TLB before any
following changes to the mapping.
Note that we already allow for multiple TLB entries of different sizes
for the same memory now in split_large_page() path. It's not a new
situation.
set_memory_4k() provides a way to use 4k pages on purpose. Kernel must
not remap such pages as large. Re-use one of software PTE bits to
indicate such pages.
[1] See Erratum 383 of AMD Family 10h Processors
[2] https://lore.kernel.org/linux-mm/1da1b025-cabc-6f04-bde5-e50830d1ecf0@amd.com/
[rppt@kernel.org:
* s/restore/collapse/
* update formatting per peterz
* use 'struct ptdesc' instead of 'struct page' for list of page tables to
be freed
* try to collapse PMD first and if it succeeds move on to PUD as peterz
suggested
* flush TLB twice: for changes done in the original CPA call and after
collapsing of large pages
* update commit message
]
Signed-off-by: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Co-developed-by: "Mike Rapoport (Microsoft)" <rppt@kernel.org>
Signed-off-by: "Mike Rapoport (Microsoft)" <rppt@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250126074733.1384926-4-rppt@kernel.org
There is a 'struct cpa_data *data' parameter in cpa_flush() that is
assigned to a local 'struct cpa_data *cpa' variable.
Rename the parameter from 'data' to 'cpa' and drop declaration of the
local 'cpa' variable.
Signed-off-by: "Mike Rapoport (Microsoft)" <rppt@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250126074733.1384926-3-rppt@kernel.org
The CPA_ARRAY test always uses len[1] as numpages argument to
change_page_attr_set() although the addresses array is different each
iteration of the test loop.
Replace len[1] with len[i] to have numpages matching the addresses array.
Fixes: ecc729f1f4 ("x86/mm/cpa: Add ARRAY and PAGES_ARRAY selftests")
Signed-off-by: "Mike Rapoport (Microsoft)" <rppt@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250126074733.1384926-2-rppt@kernel.org
- Support multiple hook locations for maint scripts of Debian package
- Remove 'cpio' from the build tool requirement
- Introduce gendwarfksyms tool, which computes CRCs for export symbols
based on the DWARF information
- Support CONFIG_MODVERSIONS for Rust
- Resolve all conflicts in the genksyms parser
- Fix several syntax errors in genksyms
-----BEGIN PGP SIGNATURE-----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=D553
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Support multiple hook locations for maint scripts of Debian package
- Remove 'cpio' from the build tool requirement
- Introduce gendwarfksyms tool, which computes CRCs for export symbols
based on the DWARF information
- Support CONFIG_MODVERSIONS for Rust
- Resolve all conflicts in the genksyms parser
- Fix several syntax errors in genksyms
* tag 'kbuild-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (64 commits)
kbuild: fix Clang LTO with CONFIG_OBJTOOL=n
kbuild: Strip runtime const RELA sections correctly
kconfig: fix memory leak in sym_warn_unmet_dep()
kconfig: fix file name in warnings when loading KCONFIG_DEFCONFIG_LIST
genksyms: fix syntax error for attribute before init-declarator
genksyms: fix syntax error for builtin (u)int*x*_t types
genksyms: fix syntax error for attribute after 'union'
genksyms: fix syntax error for attribute after 'struct'
genksyms: fix syntax error for attribute after abstact_declarator
genksyms: fix syntax error for attribute before nested_declarator
genksyms: fix syntax error for attribute before abstract_declarator
genksyms: decouple ATTRIBUTE_PHRASE from type-qualifier
genksyms: record attributes consistently for init-declarator
genksyms: restrict direct-declarator to take one parameter-type-list
genksyms: restrict direct-abstract-declarator to take one parameter-type-list
genksyms: remove Makefile hack
genksyms: fix last 3 shift/reduce conflicts
genksyms: fix 6 shift/reduce conflicts and 5 reduce/reduce conflicts
genksyms: reduce type_qualifier directly to decl_specifier
genksyms: rename cvar_qualifier to type_qualifier
...
Due to the fact that runtime const ELF sections are named without a
leading period or double underscore, the RSTRIP logic that removes the
static RELA sections from vmlinux fails to identify them. This results
in a situation like below, where some sections that were supposed to get
removed are left behind.
[Nr] Name Type Address Off Size ES Flg Lk Inf Al
[58] runtime_shift_d_hash_shift PROGBITS ffffffff83500f50 2900f50 000014 00 A 0 0 1
[59] .relaruntime_shift_d_hash_shift RELA 0000000000000000 55b6f00 000078 18 I 70 58 8
[60] runtime_ptr_dentry_hashtable PROGBITS ffffffff83500f68 2900f68 000014 00 A 0 0 1
[61] .relaruntime_ptr_dentry_hashtable RELA 0000000000000000 55b6f78 000078 18 I 70 60 8
[62] runtime_ptr_USER_PTR_MAX PROGBITS ffffffff83500f80 2900f80 000238 00 A 0 0 1
[63] .relaruntime_ptr_USER_PTR_MAX RELA 0000000000000000 55b6ff0 000d50 18 I 70 62 8
So tweak the match expression to strip all sections starting with .rel.
While at it, consolidate the logic used by RISC-V, s390 and x86 into a
single shared Makefile library command.
Link: https://lore.kernel.org/all/CAHk-=wjk3ynjomNvFN8jf9A1k=qSc=JFF591W00uXj-qqNUxPQ@mail.gmail.com/
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Tested-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
- The biggest changes are the TLB flushing scalability optimizations,
to update the mm_cpumask lazily and related changes. This feature
has both a track record and a continued risk of performance regressions,
so it was already delayed by a cycle - but it's all 100% perfect now™.
(Rik van Riel)
- Also miscellaneous fixes and cleanups. (Gautam Somani,
Kirill A. Shutemov, Sebastian Andrzej Siewior)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=g00u
-----END PGP SIGNATURE-----
Merge tag 'x86-mm-2025-01-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm updates from Ingo Molnar:
- The biggest changes are the TLB flushing scalability optimizations,
to update the mm_cpumask lazily and related changes.
This feature has both a track record and a continued risk of
performance regressions, so it was already delayed by a cycle - but
it's all 100% perfect now™ (Rik van Riel)
- Also miscellaneous fixes and cleanups. (Gautam Somani, Kirill
Shutemov, Sebastian Andrzej Siewior)
* tag 'x86-mm-2025-01-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Remove unnecessary include of <linux/extable.h>
x86/mtrr: Rename mtrr_overwrite_state() to guest_force_mtrr_state()
x86/mm/selftests: Fix typo in lam.c
x86/mm/tlb: Only trim the mm_cpumask once a second
x86/mm/tlb: Also remove local CPU from mm_cpumask if stale
x86/mm/tlb: Add tracepoint for TLB flush IPI to stale CPU
x86/mm/tlb: Update mm_cpumask lazily
- hostfs: Convert to writepages
- Many cleanups: Removal of dead macros, missing __init
-----BEGIN PGP SIGNATURE-----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=hSNx
-----END PGP SIGNATURE-----
Merge tag 'uml-for-linus-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux
Pull UML updates from Richard Weinberger:
- hostfs: Convert to writepages
- many cleanups: removal of dead macros, missing __init
* tag 'uml-for-linus-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux:
um: Remove unused asm/archparam.h header
um: Include missing headers in asm/pgtable.h
hostfs: Convert to writepages
um: rtc: use RTC time when calculating the alarm
um: Remove unused user_context function
um: Remove unused THREAD_NAME_LEN macro
um: Remove unused PGD_BOUND macro
um: Mark setup_env_path as __init
um: Mark install_fatal_handler as __init
um: Mark set_stklim as __init
um: Mark get_top_address as __init
um: Mark parse_cache_line as __init
um: Mark parse_host_cpu_flags as __init
um: Count iomem_size only once in physmem calculation
um: Remove obsolete fixmap support
um: Remove unused MODULES_LEN macro
Subsystem:
- use boolean values with device_init_wakeup()
Drivers:
- pcf2127: add BSM support
- pcf85063: fix possible out of bound write
-----BEGIN PGP SIGNATURE-----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=BxV0
-----END PGP SIGNATURE-----
Merge tag 'rtc-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Not much this cycle, there are multiple small fixes.
Core:
- use boolean values with device_init_wakeup()
Drivers:
- pcf2127: add BSM support
- pcf85063: fix possible out of bounds write"
* tag 'rtc-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: pcf2127: add BSM support
rtc: Remove hpet_rtc_dropped_irq()
dt-bindings: rtc: mxc: Document fsl,imx31-rtc
rtc: stm32: Use syscon_regmap_lookup_by_phandle_args
rtc: zynqmp: Fix optional clock name property
rtc: loongson: clear TOY_MATCH0_REG in loongson_rtc_isr()
rtc: pcf85063: fix potential OOB write in PCF85063 NVMEM read
rtc: tps6594: Fix integer overflow on 32bit systems
rtc: use boolean values with device_init_wakeup()
rtc: RTC_DRV_SPEAR should not default to y when compile-testing
Add a new ACPI-related quirk for Vexia EDU ATLA 10 tablet 5V (Hans
de Goede) and fix the MADT parsing code so that CPUs with different
entry types (LAPIC and x2APIC) are initialized in the order in which
they appear in the MADT as required by the ACPI specification (Zhang
Rui).
-----BEGIN PGP SIGNATURE-----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=JXCp
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.14-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"Add a new ACPI-related quirk for Vexia EDU ATLA 10 tablet 5V (Hans de
Goede) and fix the MADT parsing code so that CPUs with different entry
types (LAPIC and x2APIC) are initialized in the order in which they
appear in the MADT as required by the ACPI specification (Zhang Rui)"
* tag 'acpi-6.14-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
x86/acpi: Fix LAPIC/x2APIC parsing order
ACPI: x86: Add skip i2c clients quirk for Vexia EDU ATLA 10 tablet 5V
GCC 15 changed the default C standard version to C23, which should not
have impacted the kernel because it requests the gnu11 standard via
'-std=' in the main Makefile. However, the x86 compressed boot Makefile
uses its own set of KBUILD_CFLAGS without a '-std=' value (i.e., using
the default), resulting in errors from the kernel's definitions of bool,
true, and false in stddef.h, which are reserved keywords under C23.
./include/linux/stddef.h:11:9: error: expected identifier before ‘false’
11 | false = 0,
./include/linux/types.h:35:33: error: two or more data types in declaration specifiers
35 | typedef _Bool bool;
Set '-std=gnu11' in the x86 compressed boot Makefile to resolve the
error and consistently use the same C standard version for the entire
kernel.
Closes: https://lore.kernel.org/4OAhbllK7x4QJGpZjkYjtBYNLd_2whHx9oFiuZcGwtVR4hIzvduultkgfAIRZI3vQpZylu7Gl929HaYFRGeMEalWCpeMzCIIhLxxRhq4U-Y=@protonmail.com/
Closes: https://lore.kernel.org/Z4467umXR2PZ0M1H@tucnak/
Reported-by: Kostadin Shishmanov <kostadinshishmanov@protonmail.com>
Reported-by: Jakub Jelinek <jakub@redhat.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250121-x86-use-std-consistently-gcc-15-v1-1-8ab0acf645cb%40kernel.org
All ctl_table declared outside of functions and that remain unmodified after
initialization are const qualified. This prevents unintended modifications to
proc_handler function pointers by placing them in the .rodata section. This is
a continuation of the tree-wide effort started a few releases ago with the
constification of the ctl_table struct arguments in the sysctl API done in
78eb4ea25c ("sysctl: treewide: constify the ctl_table argument of
proc_handlers")
Testing:
Testing was done on 0-day and sysctl selftests in x86_64. The linux-next
branch was not used for such a big change in order to avoid unnecessary merge
conflicts
-----BEGIN PGP SIGNATURE-----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=x7aW
-----END PGP SIGNATURE-----
Merge tag 'constfy-sysctl-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl
Pull sysctl table constification from Joel Granados:
"All ctl_table declared outside of functions and that remain unmodified
after initialization are const qualified.
This prevents unintended modifications to proc_handler function
pointers by placing them in the .rodata section.
This is a continuation of the tree-wide effort started a few releases
ago with the constification of the ctl_table struct arguments in the
sysctl API done in 78eb4ea25c ("sysctl: treewide: constify the
ctl_table argument of proc_handlers")"
* tag 'constfy-sysctl-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl:
treewide: const qualify ctl_tables where applicable
When retpolines and IBT are both disabled, the compiler is free to use
jump tables to optimize switch instructions. However, these are emitted
by Clang as absolute references into .rodata:
jmp *-0x7dfffe90(,%r9,8)
R_X86_64_32S .rodata+0x170
Given that this code will execute before that address in .rodata has even
been mapped, it is guaranteed to crash a SEV-SNP guest in a way that is
difficult to diagnose.
So disable jump tables when building this code. It would be better if we
could attach this annotation to the __head macro but this appears to be
impossible.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Tested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250127114334.1045857-6-ardb+git@google.com
Add the const qualifier to all the ctl_tables in the tree except for
watchdog_hardlockup_sysctl, memory_allocation_profiling_sysctls,
loadpin_sysctl_table and the ones calling register_net_sysctl (./net,
drivers/inifiniband dirs). These are special cases as they use a
registration function with a non-const qualified ctl_table argument or
modify the arrays before passing them on to the registration function.
Constifying ctl_table structs will prevent the modification of
proc_handler function pointers as the arrays would reside in .rodata.
This is made possible after commit 78eb4ea25c ("sysctl: treewide:
constify the ctl_table argument of proc_handlers") constified all the
proc_handlers.
Created this by running an spatch followed by a sed command:
Spatch:
virtual patch
@
depends on !(file in "net")
disable optional_qualifier
@
identifier table_name != {
watchdog_hardlockup_sysctl,
iwcm_ctl_table,
ucma_ctl_table,
memory_allocation_profiling_sysctls,
loadpin_sysctl_table
};
@@
+ const
struct ctl_table table_name [] = { ... };
sed:
sed --in-place \
-e "s/struct ctl_table .table = &uts_kern/const struct ctl_table *table = \&uts_kern/" \
kernel/utsname_sysctl.c
Reviewed-by: Song Liu <song@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org> # for kernel/trace/
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> # SCSI
Reviewed-by: Darrick J. Wong <djwong@kernel.org> # xfs
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Wei Liu <wei.liu@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Bill O'Donnell <bodonnel@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Acked-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Acked-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
indivudual patches which are described in their changelogs.
- "Allocate and free frozen pages" from Matthew Wilcox reorganizes the
page allocator so we end up with the ability to allocate and free
zero-refcount pages. So that callers (ie, slab) can avoid a refcount
inc & dec.
- "Support large folios for tmpfs" from Baolin Wang teaches tmpfs to use
large folios other than PMD-sized ones.
- "Fix mm/rodata_test" from Petr Tesarik performs some maintenance and
fixes for this small built-in kernel selftest.
- "mas_anode_descend() related cleanup" from Wei Yang tidies up part of
the mapletree code.
- "mm: fix format issues and param types" from Keren Sun implements a
few minor code cleanups.
- "simplify split calculation" from Wei Yang provides a few fixes and a
test for the mapletree code.
- "mm/vma: make more mmap logic userland testable" from Lorenzo Stoakes
continues the work of moving vma-related code into the (relatively) new
mm/vma.c.
- "mm/page_alloc: gfp flags cleanups for alloc_contig_*()" from David
Hildenbrand cleans up and rationalizes handling of gfp flags in the page
allocator.
- "readahead: Reintroduce fix for improper RA window sizing" from Jan
Kara is a second attempt at fixing a readahead window sizing issue. It
should reduce the amount of unnecessary reading.
- "synchronously scan and reclaim empty user PTE pages" from Qi Zheng
addresses an issue where "huge" amounts of pte pagetables are
accumulated
(https://lore.kernel.org/lkml/cover.1718267194.git.zhengqi.arch@bytedance.com/).
Qi's series addresses this windup by synchronously freeing PTE memory
within the context of madvise(MADV_DONTNEED).
- "selftest/mm: Remove warnings found by adding compiler flags" from
Muhammad Usama Anjum fixes some build warnings in the selftests code
when optional compiler warnings are enabled.
- "mm: don't use __GFP_HARDWALL when migrating remote pages" from David
Hildenbrand tightens the allocator's observance of __GFP_HARDWALL.
- "pkeys kselftests improvements" from Kevin Brodsky implements various
fixes and cleanups in the MM selftests code, mainly pertaining to the
pkeys tests.
- "mm/damon: add sample modules" from SeongJae Park enhances DAMON to
estimate application working set size.
- "memcg/hugetlb: Rework memcg hugetlb charging" from Joshua Hahn
provides some cleanups to memcg's hugetlb charging logic.
- "mm/swap_cgroup: remove global swap cgroup lock" from Kairui Song
removes the global swap cgroup lock. A speedup of 10% for a tmpfs-based
kernel build was demonstrated.
- "zram: split page type read/write handling" from Sergey Senozhatsky
has several fixes and cleaups for zram in the area of zram_write_page().
A watchdog softlockup warning was eliminated.
- "move pagetable_*_dtor() to __tlb_remove_table()" from Kevin Brodsky
cleans up the pagetable destructor implementations. A rare
use-after-free race is fixed.
- "mm/debug: introduce and use VM_WARN_ON_VMG()" from Lorenzo Stoakes
simplifies and cleans up the debugging code in the VMA merging logic.
- "Account page tables at all levels" from Kevin Brodsky cleans up and
regularizes the pagetable ctor/dtor handling. This results in
improvements in accounting accuracy.
- "mm/damon: replace most damon_callback usages in sysfs with new core
functions" from SeongJae Park cleans up and generalizes DAMON's sysfs
file interface logic.
- "mm/damon: enable page level properties based monitoring" from
SeongJae Park increases the amount of information which is presented in
response to DAMOS actions.
- "mm/damon: remove DAMON debugfs interface" from SeongJae Park removes
DAMON's long-deprecated debugfs interfaces. Thus the migration to sysfs
is completed.
- "mm/hugetlb: Refactor hugetlb allocation resv accounting" from Peter
Xu cleans up and generalizes the hugetlb reservation accounting.
- "mm: alloc_pages_bulk: small API refactor" from Luiz Capitulino
removes a never-used feature of the alloc_pages_bulk() interface.
- "mm/damon: extend DAMOS filters for inclusion" from SeongJae Park
extends DAMOS filters to support not only exclusion (rejecting), but
also inclusion (allowing) behavior.
- "Add zpdesc memory descriptor for zswap.zpool" from Alex Shi
"introduces a new memory descriptor for zswap.zpool that currently
overlaps with struct page for now. This is part of the effort to reduce
the size of struct page and to enable dynamic allocation of memory
descriptors."
- "mm, swap: rework of swap allocator locks" from Kairui Song redoes and
simplifies the swap allocator locking. A speedup of 400% was
demonstrated for one workload. As was a 35% reduction for kernel build
time with swap-on-zram.
- "mm: update mips to use do_mmap(), make mmap_region() internal" from
Lorenzo Stoakes reworks MIPS's use of mmap_region() so that
mmap_region() can be made MM-internal.
- "mm/mglru: performance optimizations" from Yu Zhao fixes a few MGLRU
regressions and otherwise improves MGLRU performance.
- "Docs/mm/damon: add tuning guide and misc updates" from SeongJae Park
updates DAMON documentation.
- "Cleanup for memfd_create()" from Isaac Manjarres does that thing.
- "mm: hugetlb+THP folio and migration cleanups" from David Hildenbrand
provides various cleanups in the areas of hugetlb folios, THP folios and
migration.
- "Uncached buffered IO" from Jens Axboe implements the new
RWF_DONTCACHE flag which provides synchronous dropbehind for pagecache
reading and writing. To permite userspace to address issues with
massive buildup of useless pagecache when reading/writing fast devices.
- "selftests/mm: virtual_address_range: Reduce memory" from Thomas
Weißschuh fixes and optimizes some of the MM selftests.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZ5a+cwAKCRDdBJ7gKXxA
jtoyAP9R58oaOKPJuTizEKKXvh/RpMyD6sYcz/uPpnf+cKTZxQEAqfVznfWlw/Lz
uC3KRZYhmd5YrxU4o+qjbzp9XWX/xAE=
=Ib2s
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2025-01-26-14-59' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"The various patchsets are summarized below. Plus of course many
indivudual patches which are described in their changelogs.
- "Allocate and free frozen pages" from Matthew Wilcox reorganizes
the page allocator so we end up with the ability to allocate and
free zero-refcount pages. So that callers (ie, slab) can avoid a
refcount inc & dec
- "Support large folios for tmpfs" from Baolin Wang teaches tmpfs to
use large folios other than PMD-sized ones
- "Fix mm/rodata_test" from Petr Tesarik performs some maintenance
and fixes for this small built-in kernel selftest
- "mas_anode_descend() related cleanup" from Wei Yang tidies up part
of the mapletree code
- "mm: fix format issues and param types" from Keren Sun implements a
few minor code cleanups
- "simplify split calculation" from Wei Yang provides a few fixes and
a test for the mapletree code
- "mm/vma: make more mmap logic userland testable" from Lorenzo
Stoakes continues the work of moving vma-related code into the
(relatively) new mm/vma.c
- "mm/page_alloc: gfp flags cleanups for alloc_contig_*()" from David
Hildenbrand cleans up and rationalizes handling of gfp flags in the
page allocator
- "readahead: Reintroduce fix for improper RA window sizing" from Jan
Kara is a second attempt at fixing a readahead window sizing issue.
It should reduce the amount of unnecessary reading
- "synchronously scan and reclaim empty user PTE pages" from Qi Zheng
addresses an issue where "huge" amounts of pte pagetables are
accumulated:
https://lore.kernel.org/lkml/cover.1718267194.git.zhengqi.arch@bytedance.com/
Qi's series addresses this windup by synchronously freeing PTE
memory within the context of madvise(MADV_DONTNEED)
- "selftest/mm: Remove warnings found by adding compiler flags" from
Muhammad Usama Anjum fixes some build warnings in the selftests
code when optional compiler warnings are enabled
- "mm: don't use __GFP_HARDWALL when migrating remote pages" from
David Hildenbrand tightens the allocator's observance of
__GFP_HARDWALL
- "pkeys kselftests improvements" from Kevin Brodsky implements
various fixes and cleanups in the MM selftests code, mainly
pertaining to the pkeys tests
- "mm/damon: add sample modules" from SeongJae Park enhances DAMON to
estimate application working set size
- "memcg/hugetlb: Rework memcg hugetlb charging" from Joshua Hahn
provides some cleanups to memcg's hugetlb charging logic
- "mm/swap_cgroup: remove global swap cgroup lock" from Kairui Song
removes the global swap cgroup lock. A speedup of 10% for a
tmpfs-based kernel build was demonstrated
- "zram: split page type read/write handling" from Sergey Senozhatsky
has several fixes and cleaups for zram in the area of
zram_write_page(). A watchdog softlockup warning was eliminated
- "move pagetable_*_dtor() to __tlb_remove_table()" from Kevin
Brodsky cleans up the pagetable destructor implementations. A rare
use-after-free race is fixed
- "mm/debug: introduce and use VM_WARN_ON_VMG()" from Lorenzo Stoakes
simplifies and cleans up the debugging code in the VMA merging
logic
- "Account page tables at all levels" from Kevin Brodsky cleans up
and regularizes the pagetable ctor/dtor handling. This results in
improvements in accounting accuracy
- "mm/damon: replace most damon_callback usages in sysfs with new
core functions" from SeongJae Park cleans up and generalizes
DAMON's sysfs file interface logic
- "mm/damon: enable page level properties based monitoring" from
SeongJae Park increases the amount of information which is
presented in response to DAMOS actions
- "mm/damon: remove DAMON debugfs interface" from SeongJae Park
removes DAMON's long-deprecated debugfs interfaces. Thus the
migration to sysfs is completed
- "mm/hugetlb: Refactor hugetlb allocation resv accounting" from
Peter Xu cleans up and generalizes the hugetlb reservation
accounting
- "mm: alloc_pages_bulk: small API refactor" from Luiz Capitulino
removes a never-used feature of the alloc_pages_bulk() interface
- "mm/damon: extend DAMOS filters for inclusion" from SeongJae Park
extends DAMOS filters to support not only exclusion (rejecting),
but also inclusion (allowing) behavior
- "Add zpdesc memory descriptor for zswap.zpool" from Alex Shi
introduces a new memory descriptor for zswap.zpool that currently
overlaps with struct page for now. This is part of the effort to
reduce the size of struct page and to enable dynamic allocation of
memory descriptors
- "mm, swap: rework of swap allocator locks" from Kairui Song redoes
and simplifies the swap allocator locking. A speedup of 400% was
demonstrated for one workload. As was a 35% reduction for kernel
build time with swap-on-zram
- "mm: update mips to use do_mmap(), make mmap_region() internal"
from Lorenzo Stoakes reworks MIPS's use of mmap_region() so that
mmap_region() can be made MM-internal
- "mm/mglru: performance optimizations" from Yu Zhao fixes a few
MGLRU regressions and otherwise improves MGLRU performance
- "Docs/mm/damon: add tuning guide and misc updates" from SeongJae
Park updates DAMON documentation
- "Cleanup for memfd_create()" from Isaac Manjarres does that thing
- "mm: hugetlb+THP folio and migration cleanups" from David
Hildenbrand provides various cleanups in the areas of hugetlb
folios, THP folios and migration
- "Uncached buffered IO" from Jens Axboe implements the new
RWF_DONTCACHE flag which provides synchronous dropbehind for
pagecache reading and writing. To permite userspace to address
issues with massive buildup of useless pagecache when
reading/writing fast devices
- "selftests/mm: virtual_address_range: Reduce memory" from Thomas
Weißschuh fixes and optimizes some of the MM selftests"
* tag 'mm-stable-2025-01-26-14-59' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (321 commits)
mm/compaction: fix UBSAN shift-out-of-bounds warning
s390/mm: add missing ctor/dtor on page table upgrade
kasan: sw_tags: use str_on_off() helper in kasan_init_sw_tags()
tools: add VM_WARN_ON_VMG definition
mm/damon/core: use str_high_low() helper in damos_wmark_wait_us()
seqlock: add missing parameter documentation for raw_seqcount_try_begin()
mm/page-writeback: consolidate wb_thresh bumping logic into __wb_calc_thresh
mm/page_alloc: remove the incorrect and misleading comment
zram: remove zcomp_stream_put() from write_incompressible_page()
mm: separate move/undo parts from migrate_pages_batch()
mm/kfence: use str_write_read() helper in get_access_type()
selftests/mm/mkdirty: fix memory leak in test_uffdio_copy()
kasan: hw_tags: Use str_on_off() helper in kasan_init_hw_tags()
selftests/mm: virtual_address_range: avoid reading from VM_IO mappings
selftests/mm: vm_util: split up /proc/self/smaps parsing
selftests/mm: virtual_address_range: unmap chunks after validation
selftests/mm: virtual_address_range: mmap() without PROT_WRITE
selftests/memfd/memfd_test: fix possible NULL pointer dereference
mm: add FGP_DONTCACHE folio creation flag
mm: call filemap_fdatawrite_range_kick() after IOCB_DONTCACHE issue
...
this pull are:
- "lib min_heap: Improve min_heap safety, testing, and documentation"
from Kuan-Wei Chiu provides various tightenings to the min_heap library
code.
- "xarray: extract __xa_cmpxchg_raw" from Tamir Duberstein preforms some
cleanup and Rust preparation in the xarray library code.
- "Update reference to include/asm-<arch>" from Geert Uytterhoeven fixes
pathnames in some code comments.
- "Converge on using secs_to_jiffies()" from Easwar Hariharan uses the
new secs_to_jiffies() in various places where that is appropriate.
- "ocfs2, dlmfs: convert to the new mount API" from Eric Sandeen
switches two filesystems to the new mount API.
- "Convert ocfs2 to use folios" from Matthew Wilcox does that.
- "Remove get_task_comm() and print task comm directly" from Yafang Shao
removes now-unneeded calls to get_task_comm() in various places.
- "squashfs: reduce memory usage and update docs" from Phillip Lougher
implements some memory savings in squashfs and performs some
maintainability work.
- "lib: clarify comparison function requirements" from Kuan-Wei Chiu
tightens the sort code's behaviour and adds some maintenance work.
- "nilfs2: protect busy buffer heads from being force-cleared" from
Ryusuke Konishi fixes an issues in nlifs when the fs is presented with a
corrupted image.
- "nilfs2: fix kernel-doc comments for function return values" from
Ryusuke Konishi fixes some nilfs kerneldoc.
- "nilfs2: fix issues with rename operations" from Ryusuke Konishi
addresses some nilfs BUG_ONs which syzbot was able to trigger.
- "minmax.h: Cleanups and minor optimisations" from David Laight
does some maintenance work on the min/max library code.
- "Fixes and cleanups to xarray" from Kemeng Shi does maintenance work
on the xarray library code.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZ5SP5QAKCRDdBJ7gKXxA
jqN7AQChvwXGG43n4d5SDiA/rH7ddvowQcDqhC9cAMJ1ReR7qwEA8/LIWDE4PdMX
mJnaZ1/ibpEpearrChCViApQtcyEGQI=
=ti4E
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2025-01-24-23-16' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"Mainly individually changelogged singleton patches. The patch series
in this pull are:
- "lib min_heap: Improve min_heap safety, testing, and documentation"
from Kuan-Wei Chiu provides various tightenings to the min_heap
library code
- "xarray: extract __xa_cmpxchg_raw" from Tamir Duberstein preforms
some cleanup and Rust preparation in the xarray library code
- "Update reference to include/asm-<arch>" from Geert Uytterhoeven
fixes pathnames in some code comments
- "Converge on using secs_to_jiffies()" from Easwar Hariharan uses
the new secs_to_jiffies() in various places where that is
appropriate
- "ocfs2, dlmfs: convert to the new mount API" from Eric Sandeen
switches two filesystems to the new mount API
- "Convert ocfs2 to use folios" from Matthew Wilcox does that
- "Remove get_task_comm() and print task comm directly" from Yafang
Shao removes now-unneeded calls to get_task_comm() in various
places
- "squashfs: reduce memory usage and update docs" from Phillip
Lougher implements some memory savings in squashfs and performs
some maintainability work
- "lib: clarify comparison function requirements" from Kuan-Wei Chiu
tightens the sort code's behaviour and adds some maintenance work
- "nilfs2: protect busy buffer heads from being force-cleared" from
Ryusuke Konishi fixes an issues in nlifs when the fs is presented
with a corrupted image
- "nilfs2: fix kernel-doc comments for function return values" from
Ryusuke Konishi fixes some nilfs kerneldoc
- "nilfs2: fix issues with rename operations" from Ryusuke Konishi
addresses some nilfs BUG_ONs which syzbot was able to trigger
- "minmax.h: Cleanups and minor optimisations" from David Laight does
some maintenance work on the min/max library code
- "Fixes and cleanups to xarray" from Kemeng Shi does maintenance
work on the xarray library code"
* tag 'mm-nonmm-stable-2025-01-24-23-16' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (131 commits)
ocfs2: use str_yes_no() and str_no_yes() helper functions
include/linux/lz4.h: add some missing macros
Xarray: use xa_mark_t in xas_squash_marks() to keep code consistent
Xarray: remove repeat check in xas_squash_marks()
Xarray: distinguish large entries correctly in xas_split_alloc()
Xarray: move forward index correctly in xas_pause()
Xarray: do not return sibling entries from xas_find_marked()
ipc/util.c: complete the kernel-doc function descriptions
gcov: clang: use correct function param names
latencytop: use correct kernel-doc format for func params
minmax.h: remove some #defines that are only expanded once
minmax.h: simplify the variants of clamp()
minmax.h: move all the clamp() definitions after the min/max() ones
minmax.h: use BUILD_BUG_ON_MSG() for the lo < hi test in clamp()
minmax.h: reduce the #define expansion of min(), max() and clamp()
minmax.h: update some comments
minmax.h: add whitespace around operators and after commas
nilfs2: do not update mtime of renamed directory that is not moved
nilfs2: handle errors that nilfs_prepare_chunk() may return
CREDITS: fix spelling mistake
...
Before SLUB initialization, various subsystems used memblock_alloc to
allocate memory. In most cases, when memory allocation fails, an
immediate panic is required. To simplify this behavior and reduce
repetitive checks, introduce `memblock_alloc_or_panic`. This function
ensures that memory allocation failures result in a panic automatically,
improving code readability and consistency across subsystems that require
this behavior.
[guoweikang.kernel@gmail.com: arch/s390: save_area_alloc default failure behavior changed to panic]
Link: https://lkml.kernel.org/r/20250109033136.2845676-1-guoweikang.kernel@gmail.com
Link: https://lore.kernel.org/lkml/Z2fknmnNtiZbCc7x@kernel.org/
Link: https://lkml.kernel.org/r/20250102072528.650926-1-guoweikang.kernel@gmail.com
Signed-off-by: Guo Weikang <guoweikang.kernel@gmail.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> [s390]
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We already have a generic implementation of alloc/free up to P4D level, as
well as pgd_free(). Let's finish the work and add a generic PGD-level
alloc helper as well.
Unlike at lower levels, almost all architectures need some specific magic
at PGD level (typically initialising PGD entries), so introducing a
generic pgd_alloc() isn't worth it. Instead we introduce two new helpers,
__pgd_alloc() and __pgd_free(), and make use of them in the arch-specific
pgd_alloc() and pgd_free() wherever possible. To accommodate as many arch
as possible, __pgd_alloc() takes a page allocation order.
Because pagetable_alloc() allocates zeroed pages, explicit zeroing in
pgd_alloc() becomes redundant and we can get rid of it. Some trivial
implementations of pgd_free() also become unnecessary once __pgd_alloc()
is used; remove them.
Another small improvement is consistent accounting of PGD pages by using
GFP_PGTABLE_{USER,KERNEL} as appropriate.
Not all PGD allocations can be handled by the generic helpers. In
particular, multiple architectures allocate PGDs from a kmem_cache, and
those PGDs may not be page-sized.
Link: https://lkml.kernel.org/r/20250103184415.2744423-6-kevin.brodsky@arm.com
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The __tlb_remove_table_one() in x86 does not contain architecture-specific
content, so move it to the generic file.
Link: https://lkml.kernel.org/r/aab8a449bc67167943fd2cb5aab0a3a23b7b1cd7.1736317725.git.zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Aneesh Kumar K.V (Arm) <aneesh.kumar@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Several architectures (arm, arm64, riscv and x86) define exactly the same
__tlb_remove_table(), just introduce generic __tlb_remove_table() to
eliminate these duplications.
The s390 __tlb_remove_table() is nearly the same, so also make s390
__tlb_remove_table() version generic.
Link: https://lkml.kernel.org/r/ea372633d94f4d3f9f56a7ec5994bf050bf77e39.1736317725.git.zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Kevin Brodsky <kevin.brodsky@arm.com>
Acked-by: Andreas Larsson <andreas@gaisler.com> [sparc]
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> [s390]
Acked-by: Arnd Bergmann <arnd@arndb.de> [asm-generic]
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Aneesh Kumar K.V (Arm) <aneesh.kumar@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Move pagetable_dtor() to __tlb_remove_table(), so that ptlock and page
table pages can be freed together (regardless of whether RCU is used).
This prevents the use-after-free problem where the ptlock is freed
immediately but the page table pages is freed later via RCU.
Link: https://lkml.kernel.org/r/27b3cdc8786bebd4f748380bf82f796482718504.1736317725.git.zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Aneesh Kumar K.V (Arm) <aneesh.kumar@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Convert __tlb_remove_table() to use struct ptdesc, which will help to move
pagetable_dtor() to __tlb_remove_table().
And page tables shouldn't have swap cache, so use pagetable_free() instead
of free_page_and_swap_cache() to free page table pages.
Link: https://lkml.kernel.org/r/39f60f93143ff77cf5d6b3c3e75af0ffc1480adb.1736317725.git.zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Aneesh Kumar K.V (Arm) <aneesh.kumar@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The pagetable_p*_dtor() are exactly the same except for the handling of
ptlock. If we make ptlock_free() handle the case where ptdesc->ptl is
NULL and remove VM_BUG_ON_PAGE() from pmd_ptlock_free(), we can unify
pagetable_p*_dtor() into one function. Let's introduce pagetable_dtor()
to do this.
Later, pagetable_dtor() will be moved to tlb_remove_ptdesc(), so that
ptlock and page table pages can be freed together (regardless of whether
RCU is used). This prevents the use-after-free problem where the ptlock
is freed immediately but the page table pages is freed later via RCU.
Link: https://lkml.kernel.org/r/47f44fff9dc68d9d9e9a0d6c036df275f820598a.1736317725.git.zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Originally-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kevin Brodsky <kevin.brodsky@arm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> [s390]
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Aneesh Kumar K.V (Arm) <aneesh.kumar@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Four architectures currently implement 5-level pgtables: arm64, riscv, x86
and s390. The first three have essentially the same implementation for
p4d_alloc_one() and p4d_free(), so we've got an opportunity to reduce
duplication like at the lower levels.
Provide a generic version of p4d_alloc_one() and p4d_free(), and make use
of it on those architectures.
Their implementation is the same as at PUD level, except that p4d_free()
performs a runtime check by calling mm_p4d_folded(). 5-level pgtables
depend on a runtime-detected hardware feature on all supported
architectures, so we might as well include this check in the generic
implementation. No runtime check is required in p4d_alloc_one() as the
top-level p4d_alloc() already does the required check.
Link: https://lkml.kernel.org/r/26d69c74a29183ecc335b9b407040d8e4cd70c6a.1736317725.git.zhengqi.arch@bytedance.com
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de> [asm-generic]
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Aneesh Kumar K.V (Arm) <aneesh.kumar@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=O62O
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Batch sizing of multiple BARs while memory decoding is disabled
instead of disabling/enabling decoding for each BAR individually;
this optimizes virtualized environments where toggling decoding
enable is expensive (Alex Williamson)
- Add host bridge .enable_device() and .disable_device() hooks for
bridges that need to configure things like Requester ID to StreamID
mapping when enabling devices (Frank Li)
- Extend struct pci_ecam_ops with .enable_device() and
.disable_device() hooks so drivers that use pci_host_common_probe()
instead of their own .probe() have a way to set the
.enable_device() callbacks (Marc Zyngier)
- Drop 'No bus range found' message so we don't complain when DTs
don't specify the default 'bus-range = <0x00 0xff>' (Bjorn Helgaas)
- Rename the drivers/pci/of_property.c struct of_pci_range to
of_pci_range_entry to avoid confusion with the global of_pci_range
in include/linux/of_address.h (Bjorn Helgaas)
Driver binding:
- Update resource request API documentation to encourage callers to
supply a driver name when requesting resources (Philipp Stanner)
- Export pci_intx_unmanaged() and pcim_intx() (always managed) so
callers of pci_intx() (which is sometimes managed) can explicitly
choose the one they need (Philipp Stanner)
- Convert drivers from pci_intx() to always-managed pcim_intx() or
never-managed pci_intx_unmanaged(): amd_sfh, ata (ahci, ata_piix,
pata_rdc, sata_sil24, sata_sis, sata_uli, sata_vsc), bnx2x, bna,
ntb, qtnfmac, rtsx, tifm_7xx1, vfio, xen-pciback (Philipp Stanner)
- Remove pci_intx_unmanaged() since pci_intx() is now always
unmanaged and pcim_intx() is always managed (Philipp Stanner)
Error handling:
- Unexport pcie_read_tlp_log() to encourage drivers to use PCI core
logging rather than building their own (Ilpo Järvinen)
- Move TLP Log handling to its own file (Ilpo Järvinen)
- Store number of supported End-End TLP Prefixes always so we can
read the correct number of DWORDs from the TLP Prefix Log (Ilpo
Järvinen)
- Read TLP Prefixes in addition to the Header Log in
pcie_read_tlp_log() (Ilpo Järvinen)
- Add pcie_print_tlp_log() to consolidate printing of TLP Header and
Prefix Log (Ilpo Järvinen)
- Quirk the Intel Raptor Lake-P PIO log size to accommodate vendor
BIOSes that don't configure it correctly (Takashi Iwai)
ASPM:
- Save parent L1 PM Substates config so when we restore it along with
an endpoint's config, the parent info isn't junk (Jian-Hong Pan)
Power management:
- Avoid D3 for Root Ports on TUXEDO Sirius Gen1 with old BIOS because
the system can't wake up from suspend (Werner Sembach)
Endpoint framework:
- Destroy the EPC device in devm_pci_epc_destroy(), which previously
didn't call devres_release() (Zijun Hu)
- Finish virtual EP removal in pci_epf_remove_vepf(), which
previously caused a subsequent pci_epf_add_vepf() to fail with
-EBUSY (Zijun Hu)
- Write BAR_MASK before iATU registers in pci_epc_set_bar() so we
don't depend on the BAR_MASK reset value being larger than the
requested BAR size (Niklas Cassel)
- Prevent changing BAR size/flags in pci_epc_set_bar() to prevent
reads from bypassing the iATU if we reduced the BAR size (Niklas
Cassel)
- Verify address alignment when programming iATU so we don't attempt
to write bits that are read-only because of the BAR size, which
could lead to directing accesses to the wrong address (Niklas
Cassel)
- Implement artpec6 pci_epc_features so we can rely on all drivers
supporting it so we can use it in EPC core code (Niklas Cassel)
- Check for BARs of fixed size to prevent endpoint drivers from
trying to change their size (Niklas Cassel)
- Verify that requested BAR size is a power of two when endpoint
driver sets the BAR (Niklas Cassel)
Endpoint framework tests:
- Clear pci-epf-test dma_chan_rx, not dma_chan_tx, after freeing
dma_chan_rx (Mohamed Khalfella)
- Correct the DMA MEMCPY test so it doesn't fail if the Endpoint
supports both DMA_PRIVATE and DMA_MEMCPY (Manivannan Sadhasivam)
- Add pci-epf-test and pci_endpoint_test support for capabilities
(Niklas Cassel)
- Add Endpoint test for consecutive BARs (Niklas Cassel)
- Remove redundant comparison from Endpoint BAR test because a > 1MB
BAR can always be exactly covered by iterating with a 1MB buffer
(Hans Zhang)
- Move and convert PCI Endpoint tests from tools/pci to Kselftests
(Manivannan Sadhasivam)
Apple PCIe controller driver:
- Convert StreamID mapping configuration from a bus notifier to the
.enable_device() and .disable_device() callbacks (Marc Zyngier)
Freescale i.MX6 PCIe controller driver:
- Add Requester ID to StreamID mapping configuration when enabling
devices (Frank Li)
- Use DWC core suspend/resume functions for imx6 (Frank Li)
- Add suspend/resume support for i.MX8MQ, i.MX8Q, and i.MX95 (Richard
Zhu)
- Add DT compatible string 'fsl,imx8q-pcie-ep' and driver support for
i.MX8Q series (i.MX8QM, i.MX8QXP, and i.MX8DXL) Endpoints (Frank
Li)
- Add DT binding for optional i.MX95 Refclk and driver support to
enable it if the platform hasn't enabled it (Richard Zhu)
- Configure PHY based on controller being in Root Complex or Endpoint
mode (Frank Li)
- Rely on dbi2 and iATU base addresses from DT via
dw_pcie_get_resources() instead of hardcoding them (Richard Zhu)
- Deassert apps_reset in imx_pcie_deassert_core_reset() since it is
asserted in imx_pcie_assert_core_reset() (Richard Zhu)
- Add missing reference clock enable or disable logic for IMX6SX,
IMX7D, IMX8MM (Richard Zhu)
- Remove redundant imx7d_pcie_init_phy() since
imx7d_pcie_enable_ref_clk() does the same thing (Richard Zhu)
Freescale Layerscape PCIe controller driver:
- Simplify by using syscon_regmap_lookup_by_phandle_args() instead
of syscon_regmap_lookup_by_phandle() followed by
of_property_read_u32_array() (Krzysztof Kozlowski)
Marvell MVEBU PCIe controller driver:
- Add MODULE_DEVICE_TABLE() to enable module autoloading (Liao Chen)
MediaTek PCIe Gen3 controller driver:
- Use clk_bulk_prepare_enable() instead of separate
clk_bulk_prepare() and clk_bulk_enable() (Lorenzo Bianconi)
- Rearrange reset assert/deassert so they're both done in the
*_power_up() callbacks (Lorenzo Bianconi)
- Document that Airoha EN7581 requires PHY init and power-on before
PHY reset deassert, unlike other MediaTek Gen3 controllers (Lorenzo
Bianconi)
- Move Airoha EN7581 post-reset delay from the en7581 clock .enable()
method to mtk_pcie_en7581_power_up() (Lorenzo Bianconi)
- Sleep instead of delay during Airoha EN7581 power-up, since this is
a non-atomic context (Lorenzo Bianconi)
- Skip PERST# assertion on Airoha EN7581 during probe and
suspend/resume to avoid a hardware defect (Lorenzo Bianconi)
- Enable async probe to reduce system startup time (Douglas Anderson)
Microchip PolarFlare PCIe controller driver:
- Set up the inbound address translation based on whether the
platform allows coherent or non-coherent DMA (Daire McNamara)
- Update DT binding such that platforms are DMA-coherent by default
and must specify 'dma-noncoherent' if needed (Conor Dooley)
Mobiveil PCIe controller driver:
- Convert mobiveil-pcie.txt to YAML and update 'interrupt-names'
and 'reg-names' (Frank Li)
Qualcomm PCIe controller driver:
- Add DT SM8550 and SM8650 optional 'global' interrupt for link
events (Neil Armstrong)
- Add DT 'compatible' strings for IPQ5424 PCIe controller (Manikanta
Mylavarapu)
- If 'global' IRQ is supported for detection of Link Up events, tell
DWC core not to wait for link up (Krishna chaitanya chundru)
Renesas R-Car PCIe controller driver:
- Avoid passing stack buffer as resource name (King Dix)
Rockchip PCIe controller driver:
- Simplify clock and reset handling by using bulk interfaces (Anand
Moon)
- Pass typed rockchip_pcie (not void) pointer to
rockchip_pcie_disable_clocks() (Anand Moon)
- Return -ENOMEM, not success, when pci_epc_mem_alloc_addr() fails
(Dan Carpenter)
Rockchip DesignWare PCIe controller driver:
- Use dll_link_up IRQ to detect Link Up and enumerate devices so
users don't have to manually rescan (Niklas Cassel)
- Tell DWC core not to wait for link up since the 'sys' interrupt is
required and detects Link Up events (Niklas Cassel)
Synopsys DesignWare PCIe controller driver:
- Don't wait for link up in DWC core if driver can detect Link Up
event (Krishna chaitanya chundru)
- Update ICC and OPP votes after Link Up events (Krishna chaitanya
chundru)
- Always stop link in dw_pcie_suspend_noirq(), which is required at
least for i.MX8QM to re-establish link on resume (Richard Zhu)
- Drop racy and unnecessary LTSSM state check before sending
PME_TURN_OFF message in dw_pcie_suspend_noirq() (Richard Zhu)
- Add struct of_pci_range.parent_bus_addr for devices that need their
immediate parent bus address, not the CPU address, e.g., to program
an internal Address Translation Unit (iATU) (Frank Li)
TI DRA7xx PCIe controller driver:
- Simplify by using syscon_regmap_lookup_by_phandle_args() instead of
syscon_regmap_lookup_by_phandle() followed by
of_parse_phandle_with_fixed_args() or of_property_read_u32_index()
(Krzysztof Kozlowski)
Xilinx Versal CPM PCIe controller driver:
- Add DT binding and driver support for Xilinx Versal CPM5
(Thippeswamy Havalige)
MicroSemi Switchtec management driver:
- Add Microchip PCI100X device IDs (Rakesh Babu Saladi)
Miscellaneous:
- Move reset related sysfs code from pci.c to pci-sysfs.c where other
similar code lives (Ilpo Järvinen)
- Simplify reset_method_store() memory management by using __free()
instead of explicit kfree() cleanup (Ilpo Järvinen)
- Constify struct bin_attribute for sysfs, VPD, P2PDMA, and the IBM
ACPI hotplug driver (Thomas Weißschuh)
- Remove redundant PCI_VSEC_HDR and PCI_VSEC_HDR_LEN_SHIFT (Dongdong
Zhang)
- Correct documentation of the 'config_acs=' kernel parameter
(Akihiko Odaki)"
* tag 'pci-v6.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (111 commits)
PCI: Batch BAR sizing operations
dt-bindings: PCI: microchip,pcie-host: Allow dma-noncoherent
PCI: microchip: Set inbound address translation for coherent or non-coherent mode
Documentation: Fix pci=config_acs= example
PCI: Remove redundant PCI_VSEC_HDR and PCI_VSEC_HDR_LEN_SHIFT
PCI: Don't include 'pm_wakeup.h' directly
selftests: pci_endpoint: Migrate to Kselftest framework
selftests: Move PCI Endpoint tests from tools/pci to Kselftests
misc: pci_endpoint_test: Fix IOCTL return value
dt-bindings: PCI: qcom: Document the IPQ5424 PCIe controller
dt-bindings: PCI: qcom,pcie-sm8550: Document 'global' interrupt
dt-bindings: PCI: mobiveil: Convert mobiveil-pcie.txt to YAML
PCI: switchtec: Add Microchip PCI100X device IDs
misc: pci_endpoint_test: Remove redundant 'remainder' test
misc: pci_endpoint_test: Add consecutive BAR test
misc: pci_endpoint_test: Add support for capabilities
PCI: endpoint: pci-epf-test: Add support for capabilities
PCI: endpoint: pci-epf-test: Fix check for DMA MEMCPY test
PCI: endpoint: pci-epf-test: Set dma_chan_rx pointer to NULL on error
PCI: dwc: Simplify config resource lookup
...
* Clear LLBCTL if secondary mmu mapping changes.
* Add hypercall service support for usermode VMM.
x86:
* Add a comment to kvm_mmu_do_page_fault() to explain why KVM performs a
direct call to kvm_tdp_page_fault() when RETPOLINE is enabled.
* Ensure that all SEV code is compiled out when disabled in Kconfig, even
if building with less brilliant compilers.
* Remove a redundant TLB flush on AMD processors when guest CR4.PGE changes.
* Use str_enabled_disabled() to replace open coded strings.
* Drop kvm_x86_ops.hwapic_irr_update() as KVM updates hardware's APICv cache
prior to every VM-Enter.
* Overhaul KVM's CPUID feature infrastructure to track all vCPU capabilities
instead of just those where KVM needs to manage state and/or explicitly
enable the feature in hardware. Along the way, refactor the code to make
it easier to add features, and to make it more self-documenting how KVM
is handling each feature.
* Rework KVM's handling of VM-Exits during event vectoring; this plugs holes
where KVM unintentionally puts the vCPU into infinite loops in some scenarios
(e.g. if emulation is triggered by the exit), and brings parity between VMX
and SVM.
* Add pending request and interrupt injection information to the kvm_exit and
kvm_entry tracepoints respectively.
* Fix a relatively benign flaw where KVM would end up redoing RDPKRU when
loading guest/host PKRU, due to a refactoring of the kernel helpers that
didn't account for KVM's pre-checking of the need to do WRPKRU.
* Make the completion of hypercalls go through the complete_hypercall
function pointer argument, no matter if the hypercall exits to
userspace or not. Previously, the code assumed that KVM_HC_MAP_GPA_RANGE
specifically went to userspace, and all the others did not; the new code
need not special case KVM_HC_MAP_GPA_RANGE and in fact does not care at
all whether there was an exit to userspace or not.
* As part of enabling TDX virtual machines, support support separation of
private/shared EPT into separate roots. When TDX will be enabled, operations
on private pages will need to go through the privileged TDX Module via SEAMCALLs;
as a result, they are limited and relatively slow compared to reading a PTE.
The patches included in 6.14 allow KVM to keep a mirror of the private EPT in
host memory, and define entries in kvm_x86_ops to operate on external page
tables such as the TDX private EPT.
* The recently introduced conversion of the NX-page reclamation kthread to
vhost_task moved the task under the main process. The task is created as
soon as KVM_CREATE_VM was invoked and this, of course, broke userspace that
didn't expect to see any child task of the VM process until it started
creating its own userspace threads. In particular crosvm refuses to fork()
if procfs shows any child task, so unbreak it by creating the task lazily.
This is arguably a userspace bug, as there can be other kinds of legitimate
worker tasks and they wouldn't impede fork(); but it's not like userspace
has a way to distinguish kernel worker tasks right now. Should they show
as "Kthread: 1" in proc/.../status?
x86 - Intel:
* Fix a bug where KVM updates hardware's APICv cache of the highest ISR bit
while L2 is active, while ultimately results in a hardware-accelerated L1
EOI effectively being lost.
* Honor event priority when emulating Posted Interrupt delivery during nested
VM-Enter by queueing KVM_REQ_EVENT instead of immediately handling the
interrupt.
* Rework KVM's processing of the Page-Modification Logging buffer to reap
entries in the same order they were created, i.e. to mark gfns dirty in the
same order that hardware marked the page/PTE dirty.
* Misc cleanups.
Generic:
* Cleanup and harden kvm_set_memory_region(); add proper lockdep assertions when
setting memory regions and add a dedicated API for setting KVM-internal
memory regions. The API can then explicitly disallow all flags for
KVM-internal memory regions.
* Explicitly verify the target vCPU is online in kvm_get_vcpu() to fix a bug
where KVM would return a pointer to a vCPU prior to it being fully online,
and give kvm_for_each_vcpu() similar treatment to fix a similar flaw.
* Wait for a vCPU to come online prior to executing a vCPU ioctl, to fix a
bug where userspace could coerce KVM into handling the ioctl on a vCPU that
isn't yet onlined.
* Gracefully handle xarray insertion failures; even though such failures are
impossible in practice after xa_reserve(), reserving an entry is always followed
by xa_store() which does not know (or differentiate) whether there was an
xa_reserve() before or not.
RISC-V:
* Zabha, Svvptc, and Ziccrse extension support for guests. None of them
require anything in KVM except for detecting them and marking them
as supported; Zabha adds byte and halfword atomic operations, while the
others are markers for specific operation of the TLB and of LL/SC
instructions respectively.
* Virtualize SBI system suspend extension for Guest/VM
* Support firmware counters which can be used by the guests to collect
statistics about traps that occur in the host.
Selftests:
* Rework vcpu_get_reg() to return a value instead of using an out-param, and
update all affected arch code accordingly.
* Convert the max_guest_memory_test into a more generic mmu_stress_test.
The basic gist of the "conversion" is to have the test do mprotect() on
guest memory while vCPUs are accessing said memory, e.g. to verify KVM
and mmu_notifiers are working as intended.
* Play nice with treewrite builds of unsupported architectures, e.g. arm
(32-bit), as KVM selftests' Makefile doesn't do anything to ensure the
target architecture is actually one KVM selftests supports.
* Use the kernel's $(ARCH) definition instead of the target triple for arch
specific directories, e.g. arm64 instead of aarch64, mainly so as not to
be different from the rest of the kernel.
* Ensure that format strings for logging statements are checked by the
compiler even when the logging statement itself is disabled.
* Attempt to whack the last LLC references/misses mole in the Intel PMU
counters test by adding a data load and doing CLFLUSH{OPT} on the data
instead of the code being executed. It seems that modern Intel CPUs
have learned new code prefetching tricks that bypass the PMU counters.
* Fix a flaw in the Intel PMU counters test where it asserts that events
are counting correctly without actually knowing what the events count
given the underlying hardware; this can happen if Intel reuses a
formerly microarchitecture-specific event encoding as an architectural
event, as was the case for Top-Down Slots.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmeTuzoUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOkBwf8CRNExYaM3j9y2E7mmo6AiL2ug6+J
Uy5Hai1poY48pPwKC6ke3EWT8WVsgj/Py5pCeHvLojQchWNjCCYNfSQluJdkRxwG
DgP3QUljSxEJWBeSwyTRcKM+IySi5hZd1IFo3gePFRB829Jpnj05vjbvCyv8gIwU
y3HXxSYDsViaaFoNg4OlZFsIGis7mtknsZzk++QjuCXmxNa6UCbv3qvE/UkVLhVg
WH65RTRdjk+EsdwaOMHKuUvQoGa+iM4o39b6bqmw8+ZMK39+y33WeTX/y5RXsp1N
tUUBRfS+MuuYgC/6LmTr66EkMzoChxk3Dp3kKUaCBcfqRC8PxQag5reZhw==
=NEaO
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"Loongarch:
- Clear LLBCTL if secondary mmu mapping changes
- Add hypercall service support for usermode VMM
x86:
- Add a comment to kvm_mmu_do_page_fault() to explain why KVM
performs a direct call to kvm_tdp_page_fault() when RETPOLINE is
enabled
- Ensure that all SEV code is compiled out when disabled in Kconfig,
even if building with less brilliant compilers
- Remove a redundant TLB flush on AMD processors when guest CR4.PGE
changes
- Use str_enabled_disabled() to replace open coded strings
- Drop kvm_x86_ops.hwapic_irr_update() as KVM updates hardware's
APICv cache prior to every VM-Enter
- Overhaul KVM's CPUID feature infrastructure to track all vCPU
capabilities instead of just those where KVM needs to manage state
and/or explicitly enable the feature in hardware. Along the way,
refactor the code to make it easier to add features, and to make it
more self-documenting how KVM is handling each feature
- Rework KVM's handling of VM-Exits during event vectoring; this
plugs holes where KVM unintentionally puts the vCPU into infinite
loops in some scenarios (e.g. if emulation is triggered by the
exit), and brings parity between VMX and SVM
- Add pending request and interrupt injection information to the
kvm_exit and kvm_entry tracepoints respectively
- Fix a relatively benign flaw where KVM would end up redoing RDPKRU
when loading guest/host PKRU, due to a refactoring of the kernel
helpers that didn't account for KVM's pre-checking of the need to
do WRPKRU
- Make the completion of hypercalls go through the complete_hypercall
function pointer argument, no matter if the hypercall exits to
userspace or not.
Previously, the code assumed that KVM_HC_MAP_GPA_RANGE specifically
went to userspace, and all the others did not; the new code need
not special case KVM_HC_MAP_GPA_RANGE and in fact does not care at
all whether there was an exit to userspace or not
- As part of enabling TDX virtual machines, support support
separation of private/shared EPT into separate roots.
When TDX will be enabled, operations on private pages will need to
go through the privileged TDX Module via SEAMCALLs; as a result,
they are limited and relatively slow compared to reading a PTE.
The patches included in 6.14 allow KVM to keep a mirror of the
private EPT in host memory, and define entries in kvm_x86_ops to
operate on external page tables such as the TDX private EPT
- The recently introduced conversion of the NX-page reclamation
kthread to vhost_task moved the task under the main process. The
task is created as soon as KVM_CREATE_VM was invoked and this, of
course, broke userspace that didn't expect to see any child task of
the VM process until it started creating its own userspace threads.
In particular crosvm refuses to fork() if procfs shows any child
task, so unbreak it by creating the task lazily. This is arguably a
userspace bug, as there can be other kinds of legitimate worker
tasks and they wouldn't impede fork(); but it's not like userspace
has a way to distinguish kernel worker tasks right now. Should they
show as "Kthread: 1" in proc/.../status?
x86 - Intel:
- Fix a bug where KVM updates hardware's APICv cache of the highest
ISR bit while L2 is active, while ultimately results in a
hardware-accelerated L1 EOI effectively being lost
- Honor event priority when emulating Posted Interrupt delivery
during nested VM-Enter by queueing KVM_REQ_EVENT instead of
immediately handling the interrupt
- Rework KVM's processing of the Page-Modification Logging buffer to
reap entries in the same order they were created, i.e. to mark gfns
dirty in the same order that hardware marked the page/PTE dirty
- Misc cleanups
Generic:
- Cleanup and harden kvm_set_memory_region(); add proper lockdep
assertions when setting memory regions and add a dedicated API for
setting KVM-internal memory regions. The API can then explicitly
disallow all flags for KVM-internal memory regions
- Explicitly verify the target vCPU is online in kvm_get_vcpu() to
fix a bug where KVM would return a pointer to a vCPU prior to it
being fully online, and give kvm_for_each_vcpu() similar treatment
to fix a similar flaw
- Wait for a vCPU to come online prior to executing a vCPU ioctl, to
fix a bug where userspace could coerce KVM into handling the ioctl
on a vCPU that isn't yet onlined
- Gracefully handle xarray insertion failures; even though such
failures are impossible in practice after xa_reserve(), reserving
an entry is always followed by xa_store() which does not know (or
differentiate) whether there was an xa_reserve() before or not
RISC-V:
- Zabha, Svvptc, and Ziccrse extension support for guests. None of
them require anything in KVM except for detecting them and marking
them as supported; Zabha adds byte and halfword atomic operations,
while the others are markers for specific operation of the TLB and
of LL/SC instructions respectively
- Virtualize SBI system suspend extension for Guest/VM
- Support firmware counters which can be used by the guests to
collect statistics about traps that occur in the host
Selftests:
- Rework vcpu_get_reg() to return a value instead of using an
out-param, and update all affected arch code accordingly
- Convert the max_guest_memory_test into a more generic
mmu_stress_test. The basic gist of the "conversion" is to have the
test do mprotect() on guest memory while vCPUs are accessing said
memory, e.g. to verify KVM and mmu_notifiers are working as
intended
- Play nice with treewrite builds of unsupported architectures, e.g.
arm (32-bit), as KVM selftests' Makefile doesn't do anything to
ensure the target architecture is actually one KVM selftests
supports
- Use the kernel's $(ARCH) definition instead of the target triple
for arch specific directories, e.g. arm64 instead of aarch64,
mainly so as not to be different from the rest of the kernel
- Ensure that format strings for logging statements are checked by
the compiler even when the logging statement itself is disabled
- Attempt to whack the last LLC references/misses mole in the Intel
PMU counters test by adding a data load and doing CLFLUSH{OPT} on
the data instead of the code being executed. It seems that modern
Intel CPUs have learned new code prefetching tricks that bypass the
PMU counters
- Fix a flaw in the Intel PMU counters test where it asserts that
events are counting correctly without actually knowing what the
events count given the underlying hardware; this can happen if
Intel reuses a formerly microarchitecture-specific event encoding
as an architectural event, as was the case for Top-Down Slots"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (151 commits)
kvm: defer huge page recovery vhost task to later
KVM: x86/mmu: Return RET_PF* instead of 1 in kvm_mmu_page_fault()
KVM: Disallow all flags for KVM-internal memslots
KVM: x86: Drop double-underscores from __kvm_set_memory_region()
KVM: Add a dedicated API for setting KVM-internal memslots
KVM: Assert slots_lock is held when setting memory regions
KVM: Open code kvm_set_memory_region() into its sole caller (ioctl() API)
LoongArch: KVM: Add hypercall service support for usermode VMM
LoongArch: KVM: Clear LLBCTL if secondary mmu mapping is changed
KVM: SVM: Use str_enabled_disabled() helper in svm_hardware_setup()
KVM: VMX: read the PML log in the same order as it was written
KVM: VMX: refactor PML terminology
KVM: VMX: Fix comment of handle_vmx_instruction()
KVM: VMX: Reinstate __exit attribute for vmx_exit()
KVM: SVM: Use str_enabled_disabled() helper in sev_hardware_setup()
KVM: x86: Avoid double RDPKRU when loading host/guest PKRU
KVM: x86: Use LVT_TIMER instead of an open coded literal
RISC-V: KVM: Add new exit statstics for redirected traps
RISC-V: KVM: Update firmware counters for various events
RISC-V: KVM: Redirect instruction access fault trap to guest
...
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmeTFQ4THHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXqMWB/4uHjnu50u+m00OwXAKQr6i92zh50BZ
RQragd9s9C8tuUNwPDmS/ct2BNAhoy43KJ0ClegdZjKxT1Ys8cLv4Wr5CaGckqWq
+WCHqTgt+cPe0vUofqahB5wiAZMsnBgzFkV/OfFwBx0wkub9y5T3qVq5KapYlaDI
7Gftb+wg1AAsrdZ/HuLRy5ZVvkM/73rU2uoi8WXjr/T14E1krCFR/qirLd1OXo6Q
Jb97qhnCt/N9JPwIq5/VnYWde5Mpqz6UgtA2rFLDXgNGz+h9/ND6ecWFHjZWNVdc
AKWZTO5t+fRVBOSyahoyRoYSntPw3wlxyL7A2/54h6j4Dex7wLt6NQBj
=empO
-----END PGP SIGNATURE-----
Merge tag 'hyperv-next-signed-20250123' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
- Introduce a new set of Hyper-V headers in include/hyperv and replace
the old hyperv-tlfs.h with the new headers (Nuno Das Neves)
- Fixes for the Hyper-V VTL mode (Roman Kisel)
- Fixes for cpu mask usage in Hyper-V code (Michael Kelley)
- Document the guest VM hibernation behaviour (Michael Kelley)
- Miscellaneous fixes and cleanups (Jacob Pan, John Starks, Naman Jain)
* tag 'hyperv-next-signed-20250123' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
Documentation: hyperv: Add overview of guest VM hibernation
hyperv: Do not overlap the hvcall IO areas in hv_vtl_apicid_to_vp_id()
hyperv: Do not overlap the hvcall IO areas in get_vtl()
hyperv: Enable the hypercall output page for the VTL mode
hv_balloon: Fallback to generic_online_page() for non-HV hot added mem
Drivers: hv: vmbus: Log on missing offers if any
Drivers: hv: vmbus: Wait for boot-time offers during boot and resume
uio_hv_generic: Add a check for HV_NIC for send, receive buffers setup
iommu/hyper-v: Don't assume cpu_possible_mask is dense
Drivers: hv: Don't assume cpu_possible_mask is dense
x86/hyperv: Don't assume cpu_possible_mask is dense
hyperv: Remove the now unused hyperv-tlfs.h files
hyperv: Switch from hyperv-tlfs.h to hyperv/hvhdk.h
hyperv: Add new Hyper-V headers in include/hyperv
hyperv: Clean up unnecessary #includes
hyperv: Move hv_connection_id to hyperv-tlfs.h
- Increase the headroom in the EFI memory map allocation created by the
EFI stub. This is needed because event callbacks called during
ExitBootServices() may cause fragmentation, and reallocation is not
allowed after that.
- Drop obsolete UGA graphics code and switch to a more ergonomic API to
traverse handle buffers. Simplify some error paths using a __free()
helper while at it.
- Fix some W=1 warnings when CONFIG_EFI=n
- Rely on the dentry cache to keep track of the contents of the efivarfs
filesystem, rather than using a separate linked list.
- Improve and extend efivarfs test cases.
- Synchronize efivarfs with underlying variable store on resume from
hibernation - this is needed because the firmware itself or another OS
running on the same machine may have modified it.
- Fix x86 EFI stub build with GCC 15.
- Fix kexec/x86 false positive warning in EFI memory attributes table
sanity check.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCZ5IH+gAKCRAwbglWLn0t
XHyMAP9Mqn5dD4XT22gvTRUrJuVYFLBlN+9d8ysRMjRVCzGwCQEAvCUJMy5Kje0J
h9i2InWjjPOVATx5hTrEoIEl96BGOgk=
=3Hnk
-----END PGP SIGNATURE-----
Merge tag 'efi-next-for-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
- Increase the headroom in the EFI memory map allocation created by the
EFI stub. This is needed because event callbacks called during
ExitBootServices() may cause fragmentation, and reallocation is not
allowed after that.
- Drop obsolete UGA graphics code and switch to a more ergonomic API to
traverse handle buffers. Simplify some error paths using a __free()
helper while at it.
- Fix some W=1 warnings when CONFIG_EFI=n
- Rely on the dentry cache to keep track of the contents of the
efivarfs filesystem, rather than using a separate linked list.
- Improve and extend efivarfs test cases.
- Synchronize efivarfs with underlying variable store on resume from
hibernation - this is needed because the firmware itself or another
OS running on the same machine may have modified it.
- Fix x86 EFI stub build with GCC 15.
- Fix kexec/x86 false positive warning in EFI memory attributes table
sanity check.
* tag 'efi-next-for-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: (23 commits)
x86/efi: skip memattr table on kexec boot
efivarfs: add variable resync after hibernation
efivarfs: abstract initial variable creation routine
efi: libstub: Use '-std=gnu11' to fix build with GCC 15
selftests/efivarfs: add concurrent update tests
selftests/efivarfs: fix tests for failed write removal
efivarfs: fix error on write to new variable leaving remnants
efivarfs: remove unused efivarfs_list
efivarfs: move variable lifetime management into the inodes
selftests/efivarfs: add check for disallowing file truncation
efivarfs: prevent setting of zero size on the inodes in the cache
efi: sysfb_efi: fix W=1 warnings when EFI is not set
efi/libstub: Use __free() helper for pool deallocations
efi/libstub: Use cleanup helpers for freeing copies of the memory map
efi/libstub: Simplify PCI I/O handle buffer traversal
efi/libstub: Refactor and clean up GOP resolution picker code
efi/libstub: Simplify GOP handling code
efi/libstub: Use C99-style for loop to traverse handle buffer
x86/efistub: Drop long obsolete UGA support
efivarfs: make variable_is_present use dcache lookup
...
Some libraries want to ensure they are single threaded before forking,
so making the kernel's kvm huge page recovery process a vhost task of
the user process breaks those. The minijail library used by crosvm is
one such affected application.
Defer the task to after the first VM_RUN call, which occurs after the
parent process has forked all its jailed processes. This needs to happen
only once for the kvm instance, so introduce some general-purpose
infrastructure for that, too. It's similar in concept to pthread_once;
except it is actually usable, because the callback takes a parameter.
Cc: Sean Christopherson <seanjc@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Alyssa Ross <hi@alyssa.is>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Message-ID: <20250123153543.2769928-1-kbusch@meta.com>
[Move call_once API to include/linux. - Paolo]
Cc: stable@vger.kernel.org
Fixes: d96c77bd4e ("KVM: x86: switch hugepage recovery thread to vhost_task")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Highlights:
- acer-wmi:
- Add support for PH14-51, PH16-72, and Nitro AN515-58
- Add proper hwmon support
- Improve error handling when reading "gaming system info"
- Replace direct EC reads for the current platform profile
with WMI calls to handle EC address variations
- Replace custom platform_profile cycling with the generic one
- ACPI: platform_profile: Major refactoring and improvements
- Support registering multiple platform_profile handlers
concurrently to avoid the need to quirk which handler takes
precedence
- Support reporting "custom" profile for cases where the current
profile is ambiguous or when settings tweaks are done outside
the pre-defined profile
- Abstract and layer platform_profile API better using the
class_dev and drvdata
- Various minor improvements
- Add Documentation and kerneldoc
- amd/hsmp: Add support for HSMP protocol v7
- amd/pmc:
- Support AMD 1Ah family 70h
- Support STB with Ryzen desktop SoCs
- amd/pmf:
- Support Custom BIOS inputs for PMF TA
- Support passing SRA sensor data from AMD SFH (HID) to PMF TA
- dell-smo8800:
- Move SMO88xx quirk away from the generic i2c-i801 driver
- Add accelerometer support for Dell Latitude E6330/E6430 and
XPS 9550
- Support probing accelerometer for models yet to be listed in
the DMI mapping table because ACPI lacks i2c-address for the
accelerometer (behind a module parameter because probing might
be dangerous)
- HID: amd_sfh: Add support for exporting SRA sensor data
- hp-wmi: Add fan and thermal support for Victus 16-s1000
- input: Add key for phone linking
- input: i8042: Add context for the i8042 filter to enable cleaning up
the filter related global variables from pdx86 drivers
- lenovo-wmi-camera: Use SW_CAMERA_LENS_COVER instead of
KEY_CAMERA_ACCESS
- mellanox: mlxbf-pmc:
- Add support for monitoring cycle count
- Add Documentation
- thinkpad_acpi: Add support for phone link key
- tools/power/x86/intel-speed-select: Fix Turbo Ratio Limit restore
- x86-android-tables: Add support for Vexia EDU ATLA 10 Bluetooth and
EC battery driver
- Miscellaneous cleanups / refactoring / improvements
The following is an automated shortlog grouped by driver:
acer-wmi:
- add support for Acer Nitro AN515-58
- Add support for Acer PH14-51
- Add support for Acer Predator PH16-72
- Fix initialization of last_non_turbo_profile
- Ignore AC events
- Implement proper hwmon support
- Improve error handling when reading gaming system information
- Rename ACER_CAP_FAN_SPEED_READ
- simplify platform profile cycling
- use an ACPI bitmap to set the platform profile choices
- Use devm_platform_profile_register()
- use new helper function for setting overclocks
- use WMI calls for platform profile handling
ACPI: platform-profile:
- Add a name member to handlers
ACPI: platform_profile:
- Add a prefix to log messages
- Add choices attribute for class interface
- Add concept of a "custom" profile
- Add device pointer into platform profile handler
- Add devm_platform_profile_register()
- Add documentation
- Add name attribute to class interface
- Add `ops` member to handlers
- Add platform handler argument to platform_profile_remove()
- Add `probe` to platform_profile_ops
- Add profile attribute for class interface
- Allow multiple handlers
- Check all profile handler to calculate next
- Clean platform_profile_handler
- Create class for ACPI platform profile
- Let drivers set drvdata to the class device
- Make sure all profile handlers agree on profile
- Move matching string for new profile out of mutex
- Move platform_profile_handler
- Move sanity check out of the mutex
- Notify change events on register and unregister
- Notify class device from platform_profile_notify()
- Only show profiles common for all handlers
- Pass the profile handler into platform_profile_notify()
- Remove platform_profile_handler from callbacks
- Remove platform_profile_handler from exported symbols
- Replace *class_dev member with class_dev
- Use guard(mutex) for register/unregister
- Use `scoped_cond_guard`
alienware_wmi:
- General cleanup of WMAX methods
alienware-wmi:
- Improve hdmi_mux, amplifier and deepslp group creation
- Improve rgb-zones group creation
- Modify parse_rgb() signature
- Move Lighting Control State
- Remove unnecessary check at module exit
- Use devm_platform_profile_register()
amd/hsmp:
- Add support for HSMP protocol version 7 messages
- Constify 'struct bin_attribute'
amd/pmc:
- Add STB support for AMD Desktop variants
- Define enum for S2D/PMC msg_port and add helper function
- Isolate STB code changes to a new file
- Move STB block into amd_pmc_s2d_init()
- Move STB functionality to a new file for better code organization
- Update function names to align with new STB file
- Update IP information structure for newer SoCs
- Update S2D message id for 1Ah Family 70h model
- Use ARRAY_SIZE() to fill num_ips information
amd: pmc:
- Use guard(mutex)
amd: pmf:
- Drop all quirks
amd/pmf:
- Enable Custom BIOS Inputs for PMF-TA
- Get SRA sensor data from AMD SFH driver
amd: pmf: sps:
- Use devm_platform_profile_register()
amd: pmf:
- Switch to guard(mutex)
asus-wmi:
- Use devm_platform_profile_register()
dell: dcdbas:
- Constify 'struct bin_attribute'
dell: dell-pc:
- Create platform device
dell-pc:
- Use devm_platform_profile_register()
dell_rbu:
- Constify 'struct bin_attribute'
dell-smo8800:
- Add a couple more models to lis3lv02d_devices[]
- Add support for probing for the accelerometer i2c address
- Move instantiation of lis3lv02d i2c_client from i2c-i801 to dell-lis3lv02d
- Move SMO88xx acpi_device_ids to dell-smo8800-ids.h
dell-sysman:
- Directly use firmware_attributes_class
dell-uart-backlight:
- Use blacklight power constant
docs: platform/x86: wmi:
- mention tool for invoking WMI methods
Documentation/ABI:
- Add document for Mellanox PMC driver
- Add new sysfs field to sysfs-platform-mellanox-pmc
Documentation:
- Add documentation about class interface for platform profiles
firmware_attributes_class:
- Drop lifecycle functions
- Move include linux/device/class.h
- Simplify API
fujitsu-laptop:
- replace strcpy -> strscpy
HID: amd_sfh:
- Add support to export device operating states
hp-bioscfg:
- Directly use firmware_attributes_class
hp-wmi:
- Add fan and thermal profile support for Victus 16-s1000
- Use devm_platform_profile_register()
ideapad-laptop:
- Use devm_platform_profile_register()
Input:
- allocate keycode for phone linking
- i8042 - Add support for platform filter contexts
inspur_platform_profile:
- Use devm_platform_profile_register()
int3472:
- Check for adev == NULL
- Debug log the sensor name
- Fix skl_int3472_handle_gpio_resources() return value
- Make "pin number mismatch" message a debug message
intel: bytcrc_pwrsrc:
- fix power_supply dependency
- Optionally register a power_supply dev
intel: int0002_vgpio:
- Make the irqchip immutable
intel/pmt:
- Constify 'struct bin_attribute'
intel: punit_ipc:
- Remove unused function
intel/sdsi:
- Constify 'struct bin_attribute'
intel/tpmi/plr:
- Make char[] longer to silence warning
lenovo-wmi-camera:
- Use SW_CAMERA_LENS_COVER instead of KEY_CAMERA_ACESS
MAINTAINERS:
- Change AMD PMC driver status to "Supported"
mlxbf-bootctl:
- Constify 'struct bin_attribute'
- use sysfs_emit() instead of sprintf()
mlxbf-pmc:
- Add support for clock_measure performance block
- Add support for monitoring cycle count
- incorrect type in assignment
mlxreg-hotplug:
- use sysfs_emit() instead of sprintf()
mlxreg-io:
- use sysfs_emit() instead of sprintf()
quickstart:
- don't include 'pm_wakeup.h' directly
serdev_helpers:
- Add get_serdev_controller_from_parent() helper
- Check for serial_ctrl_uid == NULL
surface: surface_platform_profile:
- Use devm_platform_profile_register()
think-lmi:
- Directly use firmware_attributes_class
thinkpad_acpi:
- Add support for new phone link hotkey
thinkpad-acpi:
- replace strcpy with strscpy
thinkpad_acpi:
- Use devm_platform_profile_register()
tools/power/x86/intel-speed-select:
- Fix TRL restore after SST-TF disable
- v1.21 release
wmi-bmof:
- Make use of .bin_size() callback
x86-android-tablets:
- Add Bluetooth support for Vexia EDU ATLA 10
- Add missing __init to get_i2c_adap_by_*()
- Add support for getting serdev-controller by PCI parent
- Add Vexia EDU ATLA 10 EC battery driver
- Change x86_instantiate_serdev() prototype
- make platform data be static
- Make variables only used locally static
- Store serdev-controller ACPI HID + UID in a union
Merges:
- Merge branch 'fixes' into 'for-next'
- Merge branch 'intel-sst' of https://github.com/spandruvada/linux-kernel into review-ilpo-next
- Merge branch 'platform-drivers-x86-platform-profile' into for-next
- Merge branch 'platform-drivers-x86-platform-profile' into for-next
- Merge import NS conversion from 'https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git' into for-next
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCZ5JDNAAKCRBZrE9hU+XO
MT3AAP9YSYaWZUEgV9T/De2C/ksx0XfmHULmtQHccMgqIsIxmAEAmsBOHsDozPuZ
9F2IbT4uBuQo2iwbGq0DhVd+N36kEQw=
=Vz0C
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen:
"acer-wmi:
- Add support for PH14-51, PH16-72, and Nitro AN515-58
- Add proper hwmon support
- Improve error handling when reading "gaming system info"
- Replace direct EC reads for the current platform profile with WMI
calls to handle EC address variations
- Replace custom platform_profile cycling with the generic one
ACPI:
- platform_profile: Major refactoring and improvements
- Support registering multiple platform_profile handlers concurrently
to avoid the need to quirk which handler takes precedence
- Support reporting "custom" profile for cases where the current
profile is ambiguous or when settings tweaks are done outside the
pre-defined profile
- Abstract and layer platform_profile API better using the class_dev
and drvdata
- Various minor improvements
- Add Documentation and kerneldoc
amd/hsmp:
- Add support for HSMP protocol v7
amd/pmc:
- Support AMD 1Ah family 70h
- Support STB with Ryzen desktop SoCs
amd/pmf:
- Support Custom BIOS inputs for PMF TA
- Support passing SRA sensor data from AMD SFH (HID) to PMF TA
dell-smo8800:
- Move SMO88xx quirk away from the generic i2c-i801 driver
- Add accelerometer support for Dell Latitude E6330/E6430 and XPS
9550
- Support probing accelerometer for models yet to be listed in the
DMI mapping table because ACPI lacks i2c-address for the
accelerometer (behind a module parameter because probing might be
dangerous)
HID:
- amd_sfh: Add support for exporting SRA sensor data
hp-wmi:
- Add fan and thermal support for Victus 16-s1000
input:
- Add key for phone linking
- i8042: Add context for the i8042 filter to enable cleaning up the
filter related global variables from pdx86 drivers
lenovo-wmi-camera:
- Use SW_CAMERA_LENS_COVER instead of KEY_CAMERA_ACCESS
mellanox mlxbf-pmc:
- Add support for monitoring cycle count
- Add Documentation
thinkpad_acpi:
- Add support for phone link key
tools/power/x86/intel-speed-select:
- Fix Turbo Ratio Limit restore
x86-android-tables:
- Add support for Vexia EDU ATLA 10 Bluetooth and EC battery driver
And miscellaneous cleanups / refactoring / improvements"
* tag 'platform-drivers-x86-v6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (133 commits)
platform/x86: acer-wmi: Fix initialization of last_non_turbo_profile
platform/x86: acer-wmi: Ignore AC events
platform/mellanox: mlxreg-io: use sysfs_emit() instead of sprintf()
platform/mellanox: mlxreg-hotplug: use sysfs_emit() instead of sprintf()
platform/mellanox: mlxbf-bootctl: use sysfs_emit() instead of sprintf()
platform/x86: hp-wmi: Add fan and thermal profile support for Victus 16-s1000
ACPI: platform_profile: Add a prefix to log messages
ACPI: platform_profile: Add documentation
ACPI: platform_profile: Clean platform_profile_handler
ACPI: platform_profile: Move platform_profile_handler
ACPI: platform_profile: Remove platform_profile_handler from exported symbols
platform/x86: thinkpad_acpi: Use devm_platform_profile_register()
platform/x86: inspur_platform_profile: Use devm_platform_profile_register()
platform/x86: hp-wmi: Use devm_platform_profile_register()
platform/x86: ideapad-laptop: Use devm_platform_profile_register()
platform/x86: dell-pc: Use devm_platform_profile_register()
platform/x86: asus-wmi: Use devm_platform_profile_register()
platform/x86: amd: pmf: sps: Use devm_platform_profile_register()
platform/x86: acer-wmi: Use devm_platform_profile_register()
platform/surface: surface_platform_profile: Use devm_platform_profile_register()
...
* Use new TDX module features for exception suppression and RBP
clobbering
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEV76QKkVc4xCGURexaDWVMHDJkrAFAmeQO2IACgkQaDWVMHDJ
krA/UQ/5Abo250b0p6dyez2EhDiKXVJ3v30iriiZvGT+mKDyxQQFvLYE+QDUfHz7
rKjJLEaHKt0wnHkSmBX05RpSieek2oS2ySpfIDxXW2tMjsap5a5WqcvFyOW6NcKy
uwim2tRX6/54kr76smGNdGEeLPV7GL/FTAoub8pt/TCfL/88m+qEsQOvYg7RNvrV
j9lOyL/Tt791E855cTgb1qHHFBu/I9siUWU2RTBKUPo2ILYAlSPS/xRiDe8W5fzS
kPQxtwa5RSvhLBsz4lVbABJFZ1DmvY5TqxS0MMKwh/Dfm0jBXeod7alvMXrfhddF
ikeBVKPuoB3u044rIGpoPqk4nM6ICowqI+H36D/4/bzXfz4zxRlIoPS5WdzS6ICm
23pS1MsoAUOYfWfJTgRtNvKJ7JKEhXgAZFVDWjgLF6kVVIwD0lu550fVTd0OIhaA
mko4+RmaXx+OfumZV3HZsHauV39rCQOT4Ay5jNhPho73BFExOzK3m1fmIjf2nsKu
8Pk+2bhPQV7LvBOgc42BKVMusP/IW4O3dyzS8NnD2YO25gw+xd1oUNAb3LFGg9OJ
vJXLuxlcHe6PmH9TdSZ+Lwj31vpbFtGTX5AOAzVbaIyfIJTuDUmTY5BX9eTW0/N7
iLiNaY713mapkDBbKqWBsiBi1SEVuDZyrixujUiMMrGUwXRCAH4=
=nzuM
-----END PGP SIGNATURE-----
Merge tag 'x86_tdx_for_6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 TDX updates from Dave Hansen:
"Intel Trust Domain updates.
The existing TDX code needs a _bit_ of metadata from the TDX module.
But KVM is going to need a bunch more very shortly. Rework the
interface with the TDX module to be more consistent and handle the new
higher volume.
The TDX module has added a few new features. The first is a promise
not to clobber RBP under any circumstances. Basically the kernel now
will refuse to use any modules that don't have this promise. Second,
enable the new "REDUCE_VE" feature. This ensures that the TDX module
will not send some silly virtualization exceptions that the guest had
no good way to handle anyway.
- Centralize global metadata infrastructure
- Use new TDX module features for exception suppression and RBP
clobbering"
* tag 'x86_tdx_for_6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/virt/tdx: Require the module to assert it has the NO_RBP_MOD mitigation
x86/virt/tdx: Switch to use auto-generated global metadata reading code
x86/virt/tdx: Use dedicated struct members for PAMT entry sizes
x86/virt/tdx: Use auto-generated code to read global metadata
x86/virt/tdx: Start to track all global metadata in one structure
x86/virt/tdx: Rename 'struct tdx_tdmr_sysinfo' to reflect the spec better
x86/tdx: Dump attributes and TD_CTLS on boot
x86/tdx: Disable unnecessary virtualization exceptions
- A large and involved preparatory series to pave the way to add exception
handling for relocate_kernel - which will be a debugging facility that
has aided in the field to debug an exceptionally hard to debug early boot bug.
Plus assorted cleanups and fixes that were discovered along the way,
by David Woodhouse:
- Clean up and document register use in relocate_kernel_64.S
- Use named labels in swap_pages in relocate_kernel_64.S
- Only swap pages for ::preserve_context mode
- Allocate PGD for x86_64 transition page tables separately
- Copy control page into place in machine_kexec_prepare()
- Invoke copy of relocate_kernel() instead of the original
- Move relocate_kernel to kernel .data section
- Add data section to relocate_kernel
- Drop page_list argument from relocate_kernel()
- Eliminate writes through kernel mapping of relocate_kernel page
- Clean up register usage in relocate_kernel()
- Mark relocate_kernel page as ROX instead of RWX
- Disable global pages before writing to control page
- Ensure preserve_context flag is set on return to kernel
- Use correct swap page in swap_pages function
- Fix stack and handling of re-entry point for ::preserve_context
- Mark machine_kexec() with __nocfi
- Cope with relocate_kernel() not being at the start of the page
- Use typedef for relocate_kernel_fn function prototype
- Fix location of relocate_kernel with -ffunction-sections (fix by Nathan Chancellor)
- A series to remove the last remaining absolute symbol references from
.head.text, and enforce this at build time, by Ard Biesheuvel:
- Avoid WARN()s and panic()s in early boot code
- Don't hang but terminate on failure to remap SVSM CA
- Determine VA/PA offset before entering C code
- Avoid intentional absolute symbol references in .head.text
- Disable UBSAN in early boot code
- Move ENTRY_TEXT to the start of the image
- Move .head.text into its own output section
- Reject absolute references in .head.text
- Which build-time enforcement uncovered a handful of bugs of essentially
non-working code, and a wrokaround for a toolchain bug, fixed by
Ard Biesheuvel as well:
- Fix spurious undefined reference when CONFIG_X86_5LEVEL=n, on GCC-12
- Disable UBSAN on SEV code that may execute very early
- Disable ftrace branch profiling in SEV startup code
- And miscellaneous cleanups:
- kexec_core: Add and update comments regarding the KEXEC_JUMP flow (Rafael J. Wysocki)
- x86/sysfs: Constify 'struct bin_attribute' (Thomas Weißschuh)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=vGWS
-----END PGP SIGNATURE-----
Merge tag 'x86-boot-2025-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 boot updates from Ingo Molnar:
- A large and involved preparatory series to pave the way to add
exception handling for relocate_kernel - which will be a debugging
facility that has aided in the field to debug an exceptionally hard
to debug early boot bug. Plus assorted cleanups and fixes that were
discovered along the way, by David Woodhouse:
- Clean up and document register use in relocate_kernel_64.S
- Use named labels in swap_pages in relocate_kernel_64.S
- Only swap pages for ::preserve_context mode
- Allocate PGD for x86_64 transition page tables separately
- Copy control page into place in machine_kexec_prepare()
- Invoke copy of relocate_kernel() instead of the original
- Move relocate_kernel to kernel .data section
- Add data section to relocate_kernel
- Drop page_list argument from relocate_kernel()
- Eliminate writes through kernel mapping of relocate_kernel page
- Clean up register usage in relocate_kernel()
- Mark relocate_kernel page as ROX instead of RWX
- Disable global pages before writing to control page
- Ensure preserve_context flag is set on return to kernel
- Use correct swap page in swap_pages function
- Fix stack and handling of re-entry point for ::preserve_context
- Mark machine_kexec() with __nocfi
- Cope with relocate_kernel() not being at the start of the page
- Use typedef for relocate_kernel_fn function prototype
- Fix location of relocate_kernel with -ffunction-sections (fix by Nathan Chancellor)
- A series to remove the last remaining absolute symbol references from
.head.text, and enforce this at build time, by Ard Biesheuvel:
- Avoid WARN()s and panic()s in early boot code
- Don't hang but terminate on failure to remap SVSM CA
- Determine VA/PA offset before entering C code
- Avoid intentional absolute symbol references in .head.text
- Disable UBSAN in early boot code
- Move ENTRY_TEXT to the start of the image
- Move .head.text into its own output section
- Reject absolute references in .head.text
- The above build-time enforcement uncovered a handful of bugs of
essentially non-working code, and a wrokaround for a toolchain bug,
fixed by Ard Biesheuvel as well:
- Fix spurious undefined reference when CONFIG_X86_5LEVEL=n, on GCC-12
- Disable UBSAN on SEV code that may execute very early
- Disable ftrace branch profiling in SEV startup code
- And miscellaneous cleanups:
- kexec_core: Add and update comments regarding the KEXEC_JUMP flow (Rafael J. Wysocki)
- x86/sysfs: Constify 'struct bin_attribute' (Thomas Weißschuh)"
* tag 'x86-boot-2025-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
x86/sev: Disable ftrace branch profiling in SEV startup code
x86/kexec: Use typedef for relocate_kernel_fn function prototype
x86/kexec: Cope with relocate_kernel() not being at the start of the page
kexec_core: Add and update comments regarding the KEXEC_JUMP flow
x86/kexec: Mark machine_kexec() with __nocfi
x86/kexec: Fix location of relocate_kernel with -ffunction-sections
x86/kexec: Fix stack and handling of re-entry point for ::preserve_context
x86/kexec: Use correct swap page in swap_pages function
x86/kexec: Ensure preserve_context flag is set on return to kernel
x86/kexec: Disable global pages before writing to control page
x86/sev: Don't hang but terminate on failure to remap SVSM CA
x86/sev: Disable UBSAN on SEV code that may execute very early
x86/boot/64: Fix spurious undefined reference when CONFIG_X86_5LEVEL=n, on GCC-12
x86/sysfs: Constify 'struct bin_attribute'
x86/kexec: Mark relocate_kernel page as ROX instead of RWX
x86/kexec: Clean up register usage in relocate_kernel()
x86/kexec: Eliminate writes through kernel mapping of relocate_kernel page
x86/kexec: Drop page_list argument from relocate_kernel()
x86/kexec: Add data section to relocate_kernel
x86/kexec: Move relocate_kernel to kernel .data section
...
On some systems, the same CPU (with the same APIC ID) is assigned a
different logical CPU id after commit ec9aedb2aa ("x86/acpi: Ignore
invalid x2APIC entries").
This means that Linux enumerates the CPUs in a different order, which
violates ACPI specification[1] that states:
"OSPM should initialize processors in the order that they appear in
the MADT"
The problematic commit parses all LAPIC entries before any x2APIC
entries, aiming to ignore x2APIC entries with APIC ID < 255 when valid
LAPIC entries exist. However, it disrupts the CPU enumeration order on
systems where x2APIC entries precede LAPIC entries in the MADT.
Fix this problem by:
1) Parsing LAPIC entries first without registering them in the
topology to evaluate whether valid LAPIC entries exist.
2) Restoring the MADT in order parser which invokes either the LAPIC
or the X2APIC parser function depending on the entry type.
The X2APIC parser still ignores entries < 0xff in case that #1 found
valid LAPIC entries independent of their position in the MADT table.
Link: https://uefi.org/specs/ACPI/6.5/05_ACPI_Software_Programming_Model.html#madt-processor-local-apic-sapic-structure-entry-order
Cc: All applicable <stable@vger.kernel.org>
Reported-by: Jim Mattson <jmattson@google.com>
Closes: https://lore.kernel.org/all/20241010213136.668672-1-jmattson@google.com/
Fixes: ec9aedb2aa ("x86/acpi: Ignore invalid x2APIC entries")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Tested-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20250117081420.4046737-1-rui.zhang@intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
efi_memattr_init() added a sanity check to avoid firmware caused corruption.
The check is based on efi memmap entry numbers, but kexec only takes the
runtime related memmap entries thus this caused many false warnings, see
below thread for details:
https://lore.kernel.org/all/20250108215957.3437660-2-usamaarif642@gmail.com/
Ard suggests to skip the efi memattr table in kexec, this makes sense because
those memattr fixups are not critical.
Fixes: 8fbe4c49c0 ("efi/memattr: Ignore table if the size is clearly bogus")
Cc: <stable@vger.kernel.org> # v6.13+
Reported-by: Breno Leitao <leitao@debian.org>
Reported-and-tested-by: Usama Arif <usamaarif642@gmail.com>
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
- Reorganize the architecture-optimized CRC32 and CRC-T10DIF code to be
directly accessible via the library API, instead of requiring the
crypto API. This is much simpler and more efficient.
- Convert some users such as ext4 to use the CRC32 library API instead
of the crypto API. More conversions like this will come later.
- Add a KUnit test that tests and benchmarks multiple CRC variants.
Remove older, less-comprehensive tests that are made redundant by
this.
- Add an entry to MAINTAINERS for the kernel's CRC library code. I'm
volunteering to maintain it. I have additional cleanups and
optimizations planned for future cycles.
These patches have been in linux-next since -rc1.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCZ418ZRQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOKyJYAP9kBlpm8W9/XY6N8SpjKaXE/vKQYHQl
Nobhak06Us8uJwEAkcUTymWP4IwQj5A9jgBAPRw53FQcNVKIc+01C7gRHw0=
=mqSH
-----END PGP SIGNATURE-----
Merge tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull CRC updates from Eric Biggers:
- Reorganize the architecture-optimized CRC32 and CRC-T10DIF code to be
directly accessible via the library API, instead of requiring the
crypto API. This is much simpler and more efficient.
- Convert some users such as ext4 to use the CRC32 library API instead
of the crypto API. More conversions like this will come later.
- Add a KUnit test that tests and benchmarks multiple CRC variants.
Remove older, less-comprehensive tests that are made redundant by
this.
- Add an entry to MAINTAINERS for the kernel's CRC library code. I'm
volunteering to maintain it. I have additional cleanups and
optimizations planned for future cycles.
* tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (31 commits)
MAINTAINERS: add entry for CRC library
powerpc/crc: delete obsolete crc-vpmsum_test.c
lib/crc32test: delete obsolete crc32test.c
lib/crc16_kunit: delete obsolete crc16_kunit.c
lib/crc_kunit.c: add KUnit test suite for CRC library functions
powerpc/crc-t10dif: expose CRC-T10DIF function through lib
arm64/crc-t10dif: expose CRC-T10DIF function through lib
arm/crc-t10dif: expose CRC-T10DIF function through lib
x86/crc-t10dif: expose CRC-T10DIF function through lib
crypto: crct10dif - expose arch-optimized lib function
lib/crc-t10dif: add support for arch overrides
lib/crc-t10dif: stop wrapping the crypto API
scsi: target: iscsi: switch to using the crc32c library
f2fs: switch to using the crc32 library
jbd2: switch to using the crc32c library
ext4: switch to using the crc32c library
lib/crc32: make crc32c() go directly to lib
bcachefs: Explicitly select CRYPTO from BCACHEFS_FS
x86/crc32: expose CRC32 functions through lib
x86/crc32: update prototype for crc32_pclmul_le_16()
...
1) Per-CPU kthreads must stay affine to a single CPU and never execute
relevant code on any other CPU. This is currently handled by smpboot
code which takes care of CPU-hotplug operations. Affinity here is
a correctness constraint.
2) Some kthreads _have_ to be affine to a specific set of CPUs and can't
run anywhere else. The affinity is set through kthread_bind_mask()
and the subsystem takes care by itself to handle CPU-hotplug
operations. Affinity here is assumed to be a correctness constraint.
3) Per-node kthreads _prefer_ to be affine to a specific NUMA node. This
is not a correctness constraint but merely a preference in terms of
memory locality. kswapd and kcompactd both fall into this category.
The affinity is set manually like for any other task and CPU-hotplug
is supposed to be handled by the relevant subsystem so that the task
is properly reaffined whenever a given CPU from the node comes up.
Also care should be taken so that the node affinity doesn't cross
isolated (nohz_full) cpumask boundaries.
4) Similar to the previous point except kthreads have a _preferred_
affinity different than a node. Both RCU boost kthreads and RCU
exp kworkers fall into this category as they refer to "RCU nodes"
from a distinctly distributed tree.
Currently the preferred affinity patterns (3 and 4) have at least 4
identified users, with more or less success when it comes to handle
CPU-hotplug operations and CPU isolation. Each of which do it in its own
ad-hoc way.
This is an infrastructure proposal to handle this with the following API
changes:
_ kthread_create_on_node() automatically affines the created kthread to
its target node unless it has been set as per-cpu or bound with
kthread_bind[_mask]() before the first wake-up.
- kthread_affine_preferred() is a new function that can be called right
after kthread_create_on_node() to specify a preferred affinity
different than the specified node.
When the preferred affinity can't be applied because the possible
targets are offline or isolated (nohz_full), the kthread is affine
to the housekeeping CPUs (which means to all online CPUs most of the
time or only the non-nohz_full CPUs when nohz_full= is set).
kswapd, kcompactd, RCU boost kthreads and RCU exp kworkers have been
converted, along with a few old drivers.
Summary of the changes:
* Consolidate a bunch of ad-hoc implementations of kthread_run_on_cpu()
* Introduce task_cpu_fallback_mask() that defines the default last
resort affinity of a task to become nohz_full aware
* Add some correctness check to ensure kthread_bind() is always called
before the first kthread wake up.
* Default affine kthread to its preferred node.
* Convert kswapd / kcompactd and remove their halfway working ad-hoc
affinity implementation
* Implement kthreads preferred affinity
* Unify kthread worker and kthread API's style
* Convert RCU kthreads to the new API and remove the ad-hoc affinity
implementation.
-----BEGIN PGP SIGNATURE-----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=g8In
-----END PGP SIGNATURE-----
Merge tag 'kthread-for-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks
Pull kthread updates from Frederic Weisbecker:
"Kthreads affinity follow either of 4 existing different patterns:
1) Per-CPU kthreads must stay affine to a single CPU and never
execute relevant code on any other CPU. This is currently handled
by smpboot code which takes care of CPU-hotplug operations.
Affinity here is a correctness constraint.
2) Some kthreads _have_ to be affine to a specific set of CPUs and
can't run anywhere else. The affinity is set through
kthread_bind_mask() and the subsystem takes care by itself to
handle CPU-hotplug operations. Affinity here is assumed to be a
correctness constraint.
3) Per-node kthreads _prefer_ to be affine to a specific NUMA node.
This is not a correctness constraint but merely a preference in
terms of memory locality. kswapd and kcompactd both fall into this
category. The affinity is set manually like for any other task and
CPU-hotplug is supposed to be handled by the relevant subsystem so
that the task is properly reaffined whenever a given CPU from the
node comes up. Also care should be taken so that the node affinity
doesn't cross isolated (nohz_full) cpumask boundaries.
4) Similar to the previous point except kthreads have a _preferred_
affinity different than a node. Both RCU boost kthreads and RCU
exp kworkers fall into this category as they refer to "RCU nodes"
from a distinctly distributed tree.
Currently the preferred affinity patterns (3 and 4) have at least 4
identified users, with more or less success when it comes to handle
CPU-hotplug operations and CPU isolation. Each of which do it in its
own ad-hoc way.
This is an infrastructure proposal to handle this with the following
API changes:
- kthread_create_on_node() automatically affines the created kthread
to its target node unless it has been set as per-cpu or bound with
kthread_bind[_mask]() before the first wake-up.
- kthread_affine_preferred() is a new function that can be called
right after kthread_create_on_node() to specify a preferred
affinity different than the specified node.
When the preferred affinity can't be applied because the possible
targets are offline or isolated (nohz_full), the kthread is affine to
the housekeeping CPUs (which means to all online CPUs most of the time
or only the non-nohz_full CPUs when nohz_full= is set).
kswapd, kcompactd, RCU boost kthreads and RCU exp kworkers have been
converted, along with a few old drivers.
Summary of the changes:
- Consolidate a bunch of ad-hoc implementations of
kthread_run_on_cpu()
- Introduce task_cpu_fallback_mask() that defines the default last
resort affinity of a task to become nohz_full aware
- Add some correctness check to ensure kthread_bind() is always
called before the first kthread wake up.
- Default affine kthread to its preferred node.
- Convert kswapd / kcompactd and remove their halfway working ad-hoc
affinity implementation
- Implement kthreads preferred affinity
- Unify kthread worker and kthread API's style
- Convert RCU kthreads to the new API and remove the ad-hoc affinity
implementation"
* tag 'kthread-for-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks:
kthread: modify kernel-doc function name to match code
rcu: Use kthread preferred affinity for RCU exp kworkers
treewide: Introduce kthread_run_worker[_on_cpu]()
kthread: Unify kthread_create_on_cpu() and kthread_create_worker_on_cpu() automatic format
rcu: Use kthread preferred affinity for RCU boost
kthread: Implement preferred affinity
mm: Create/affine kswapd to its preferred node
mm: Create/affine kcompactd to its preferred node
kthread: Default affine kthread to its preferred NUMA node
kthread: Make sure kthread hasn't started while binding it
sched,arm64: Handle CPU isolation on last resort fallback rq selection
arm64: Exclude nohz_full CPUs from 32bits el0 support
lib: test_objpool: Use kthread_run_on_cpu()
kallsyms: Use kthread_run_on_cpu()
soc/qman: test: Use kthread_run_on_cpu()
arm/bL_switcher: Use kthread_run_on_cpu()
- Have fprobes built on top of function graph infrastructure
The fprobe logic is an optimized kprobe that uses ftrace to attach to
functions when a probe is needed at the start or end of the function. The
fprobe and kretprobe logic implements a similar method as the function
graph tracer to trace the end of the function. That is to hijack the
return address and jump to a trampoline to do the trace when the function
exits. To do this, a shadow stack needs to be created to store the
original return address. Fprobes and function graph do this slightly
differently. Fprobes (and kretprobes) has slots per callsite that are
reserved to save the return address. This is fine when just a few points
are traced. But users of fprobes, such as BPF programs, are starting to add
many more locations, and this method does not scale.
The function graph tracer was created to trace all functions in the
kernel. In order to do this, when function graph tracing is started, every
task gets its own shadow stack to hold the return address that is going to
be traced. The function graph tracer has been updated to allow multiple
users to use its infrastructure. Now have fprobes be one of those users.
This will also allow for the fprobe and kretprobe methods to trace the
return address to become obsolete. With new technologies like CFI that
need to know about these methods of hijacking the return address, going
toward a solution that has only one method of doing this will make the
kernel less complex.
- Cleanup with guard() and free() helpers
There were several places in the code that had a lot of "goto out" in the
error paths to either unlock a lock or free some memory that was
allocated. But this is error prone. Convert the code over to use the
guard() and free() helpers that let the compiler unlock locks or free
memory when the function exits.
- Remove disabling of interrupts in the function graph tracer
When function graph tracer was first introduced, it could race with
interrupts and NMIs. To prevent that race, it would disable interrupts and
not trace NMIs. But the code has changed to allow NMIs and also
interrupts. This change was done a long time ago, but the disabling of
interrupts was never removed. Remove the disabling of interrupts in the
function graph tracer is it is not needed. This greatly improves its
performance.
- Allow the :mod: command to enable tracing module functions on the kernel
command line.
The function tracer already has a way to enable functions to be traced in
modules by writing ":mod:<module>" into set_ftrace_filter. That will
enable either all the functions for the module if it is loaded, or if it
is not, it will cache that command, and when the module is loaded that
matches <module>, its functions will be enabled. This also allows init
functions to be traced. But currently events do not have that feature.
Because enabling function tracing can be done very early at boot up
(before scheduling is enabled), the commands that can be done when
function tracing is started is limited. Having the ":mod:" command to
trace module functions as they are loaded is very useful. Update the
kernel command line function filtering to allow it.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ42E2RQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qqXSAPwOMxuhye8tb1GYG62QD9+w7e6nOmlC
2GCPj4detnEM2QD/ciivkhespVKhHpZHRewAuSnJgHPSM45NQ3EVESzjWQ4=
=snbx
-----END PGP SIGNATURE-----
Merge tag 'ftrace-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ftrace updates from Steven Rostedt:
- Have fprobes built on top of function graph infrastructure
The fprobe logic is an optimized kprobe that uses ftrace to attach to
functions when a probe is needed at the start or end of the function.
The fprobe and kretprobe logic implements a similar method as the
function graph tracer to trace the end of the function. That is to
hijack the return address and jump to a trampoline to do the trace
when the function exits. To do this, a shadow stack needs to be
created to store the original return address. Fprobes and function
graph do this slightly differently. Fprobes (and kretprobes) has
slots per callsite that are reserved to save the return address. This
is fine when just a few points are traced. But users of fprobes, such
as BPF programs, are starting to add many more locations, and this
method does not scale.
The function graph tracer was created to trace all functions in the
kernel. In order to do this, when function graph tracing is started,
every task gets its own shadow stack to hold the return address that
is going to be traced. The function graph tracer has been updated to
allow multiple users to use its infrastructure. Now have fprobes be
one of those users. This will also allow for the fprobe and kretprobe
methods to trace the return address to become obsolete. With new
technologies like CFI that need to know about these methods of
hijacking the return address, going toward a solution that has only
one method of doing this will make the kernel less complex.
- Cleanup with guard() and free() helpers
There were several places in the code that had a lot of "goto out" in
the error paths to either unlock a lock or free some memory that was
allocated. But this is error prone. Convert the code over to use the
guard() and free() helpers that let the compiler unlock locks or free
memory when the function exits.
- Remove disabling of interrupts in the function graph tracer
When function graph tracer was first introduced, it could race with
interrupts and NMIs. To prevent that race, it would disable
interrupts and not trace NMIs. But the code has changed to allow NMIs
and also interrupts. This change was done a long time ago, but the
disabling of interrupts was never removed. Remove the disabling of
interrupts in the function graph tracer is it is not needed. This
greatly improves its performance.
- Allow the :mod: command to enable tracing module functions on the
kernel command line.
The function tracer already has a way to enable functions to be
traced in modules by writing ":mod:<module>" into set_ftrace_filter.
That will enable either all the functions for the module if it is
loaded, or if it is not, it will cache that command, and when the
module is loaded that matches <module>, its functions will be
enabled. This also allows init functions to be traced. But currently
events do not have that feature.
Because enabling function tracing can be done very early at boot up
(before scheduling is enabled), the commands that can be done when
function tracing is started is limited. Having the ":mod:" command to
trace module functions as they are loaded is very useful. Update the
kernel command line function filtering to allow it.
* tag 'ftrace-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (26 commits)
ftrace: Implement :mod: cache filtering on kernel command line
tracing: Adopt __free() and guard() for trace_fprobe.c
bpf: Use ftrace_get_symaddr() for kprobe_multi probes
ftrace: Add ftrace_get_symaddr to convert fentry_ip to symaddr
Documentation: probes: Update fprobe on function-graph tracer
selftests/ftrace: Add a test case for repeating register/unregister fprobe
selftests: ftrace: Remove obsolate maxactive syntax check
tracing/fprobe: Remove nr_maxactive from fprobe
fprobe: Add fprobe_header encoding feature
fprobe: Rewrite fprobe on function-graph tracer
s390/tracing: Enable HAVE_FTRACE_GRAPH_FUNC
ftrace: Add CONFIG_HAVE_FTRACE_GRAPH_FUNC
bpf: Enable kprobe_multi feature if CONFIG_FPROBE is enabled
tracing/fprobe: Enable fprobe events with CONFIG_DYNAMIC_FTRACE_WITH_ARGS
tracing: Add ftrace_fill_perf_regs() for perf event
tracing: Add ftrace_partial_regs() for converting ftrace_regs to pt_regs
fprobe: Use ftrace_regs in fprobe exit handler
fprobe: Use ftrace_regs in fprobe entry handler
fgraph: Pass ftrace_regs to retfunc
fgraph: Replace fgraph_ret_regs with ftrace_regs
...
- Consolidation of the machine_kexec_mask_interrupts() by providing a
generic implementation and replacing the copy & pasta orgy in the
relevant architectures.
- Prevent unconditional operations on interrupt chips during kexec
shutdown, which can trigger warnings in certain cases when the
underlying interrupt has been shut down before.
- Make the enforcement of interrupt handling in interrupt context
unconditionally available, so that it actually works for non x86
related interrupt chips. The earlier enablement for ARM GIC chips set
the required chip flag, but did not notice that the check was hidden
behind a config switch which is not selected by ARM[64].
- Decrapify the handling of deferred interrupt affinity setting. Some
interrupt chips require that affinity changes are made from the context
of handling an interrupt to avoid certain race conditions. For x86 this
was the default, but with interrupt remapping this requirement was
lifted and a flag was introduced which tells the core code that
affinity changes can be done in any context. Unrestricted affinity
changes are the default for the majority of interrupt chips. RISCV has
the requirement to add the deferred mode to one of it's interrupt
controllers, but with the original implementation this would require to
add the any context flag to all other RISC-V interrupt chips. That's
backwards, so reverse the logic and require that chips, which need the
deferred mode have to be marked accordingly. That avoids chasing the
'sane' chips and marking them.
- Add multi-node support to the Loongarch AVEC interrupt controller
driver.
- The usual tiny cleanups, fixes and improvements all over the place.
-----BEGIN PGP SIGNATURE-----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=q4rj
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2025-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull interrupt subsystem updates from Thomas Gleixner:
- Consolidate the machine_kexec_mask_interrupts() by providing a
generic implementation and replacing the copy & pasta orgy in the
relevant architectures.
- Prevent unconditional operations on interrupt chips during kexec
shutdown, which can trigger warnings in certain cases when the
underlying interrupt has been shut down before.
- Make the enforcement of interrupt handling in interrupt context
unconditionally available, so that it actually works for non x86
related interrupt chips. The earlier enablement for ARM GIC chips set
the required chip flag, but did not notice that the check was hidden
behind a config switch which is not selected by ARM[64].
- Decrapify the handling of deferred interrupt affinity setting.
Some interrupt chips require that affinity changes are made from the
context of handling an interrupt to avoid certain race conditions.
For x86 this was the default, but with interrupt remapping this
requirement was lifted and a flag was introduced which tells the core
code that affinity changes can be done in any context. Unrestricted
affinity changes are the default for the majority of interrupt chips.
RISCV has the requirement to add the deferred mode to one of it's
interrupt controllers, but with the original implementation this
would require to add the any context flag to all other RISC-V
interrupt chips. That's backwards, so reverse the logic and require
that chips, which need the deferred mode have to be marked
accordingly. That avoids chasing the 'sane' chips and marking them.
- Add multi-node support to the Loongarch AVEC interrupt controller
driver.
- The usual tiny cleanups, fixes and improvements all over the place.
* tag 'irq-core-2025-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/generic_chip: Export irq_gc_mask_disable_and_ack_set()
genirq/timings: Add kernel-doc for a function parameter
genirq: Remove IRQ_MOVE_PCNTXT and related code
x86/apic: Convert to IRQCHIP_MOVE_DEFERRED
genirq: Provide IRQCHIP_MOVE_DEFERRED
hexagon: Remove GENERIC_PENDING_IRQ leftover
ARC: Remove GENERIC_PENDING_IRQ
genirq: Remove handle_enforce_irqctx() wrapper
genirq: Make handle_enforce_irqctx() unconditionally available
irqchip/loongarch-avec: Add multi-nodes topology support
irqchip/ts4800: Replace seq_printf() by seq_puts()
irqchip/ti-sci-inta : Add module build support
irqchip/ti-sci-intr: Add module build support
irqchip/irq-brcmstb-l2: Replace brcmstb_l2_mask_and_ack() by generic function
irqchip: keystone: Use syscon_regmap_lookup_by_phandle_args
genirq/kexec: Prevent redundant IRQ masking by checking state before shutdown
kexec: Consolidate machine_kexec_mask_interrupts() implementation
genirq: Reuse irq_thread_fn() for forced thread case
genirq: Move irq_thread_fn() further up in the code
- Fair scheduler (SCHED_FAIR) enhancements:
- Behavioral improvements:
- Untangle NEXT_BUDDY and pick_next_task() (Peter Zijlstra)
- Delayed-dequeue enhancements & fixes: (Vincent Guittot)
- Rename h_nr_running into h_nr_queued
- Add new cfs_rq.h_nr_runnable
- Use the new cfs_rq.h_nr_runnable
- Removed unsued cfs_rq.h_nr_delayed
- Rename cfs_rq.idle_h_nr_running into h_nr_idle
- Remove unused cfs_rq.idle_nr_running
- Rename cfs_rq.nr_running into nr_queued
- Do not try to migrate delayed dequeue task
- Fix variable declaration position
- Encapsulate set custom slice in a __setparam_fair() function
- Fixes:
- Fix race between yield_to() and try_to_wake_up() (Tianchen Ding)
- Fix CPU bandwidth limit bypass during CPU hotplug (Vishal Chourasia)
- Cleanups:
- Clean up in migrate_degrades_locality() to improve
readability (Peter Zijlstra)
- Mark m*_vruntime() with __maybe_unused (Andy Shevchenko)
- Update comments after sched_tick() rename (Sebastian Andrzej Siewior)
- Remove CONFIG_CFS_BANDWIDTH=n definition of cfs_bandwidth_used()
(Valentin Schneider)
- Deadline scheduler (SCHED_DL) enhancements:
- Restore dl_server bandwidth on non-destructive root domain
changes (Juri Lelli)
- Correctly account for allocated bandwidth during
hotplug (Juri Lelli)
- Check bandwidth overflow earlier for hotplug (Juri Lelli)
- Clean up goto label in pick_earliest_pushable_dl_task()
(John Stultz)
- Consolidate timer cancellation (Wander Lairson Costa)
- Load-balancer enhancements:
- Improve performance by prioritizing migrating eligible
tasks in sched_balance_rq() (Hao Jia)
- Do not compute NUMA Balancing stats unnecessarily during
load-balancing (K Prateek Nayak)
- Do not compute overloaded status unnecessarily during
load-balancing (K Prateek Nayak)
- Generic scheduling code enhancements:
- Use READ_ONCE() in task_on_rq_queued(), to consistently use
the WRITE_ONCE() updated ->on_rq field (Harshit Agarwal)
- Isolated CPUs support enhancements: (Waiman Long)
- Make "isolcpus=nohz" equivalent to "nohz_full"
- Consolidate housekeeping cpumasks that are always identical
- Remove HK_TYPE_SCHED
- Unify HK_TYPE_{TIMER|TICK|MISC} to HK_TYPE_KERNEL_NOISE
- RSEQ enhancements:
- Validate read-only fields under DEBUG_RSEQ config
(Mathieu Desnoyers)
- PSI enhancements:
- Fix race when task wakes up before psi_sched_switch()
adjusts flags (Chengming Zhou)
- IRQ time accounting performance enhancements: (Yafang Shao)
- Define sched_clock_irqtime as static key
- Don't account irq time if sched_clock_irqtime is disabled
- Virtual machine scheduling enhancements:
- Don't try to catch up excess steal time (Suleiman Souhlal)
- Heterogenous x86 CPU scheduling enhancements: (K Prateek Nayak)
- Convert "sysctl_sched_itmt_enabled" to boolean
- Use guard() for itmt_update_mutex
- Move the "sched_itmt_enabled" sysctl to debugfs
- Remove x86_smt_flags and use cpu_smt_flags directly
- Use x86_sched_itmt_flags for PKG domain unconditionally
- Debugging code & instrumentation enhancements:
- Change need_resched warnings to pr_err() (David Rientjes)
- Print domain name in /proc/schedstat (K Prateek Nayak)
- Fix value reported by hot tasks pulled in /proc/schedstat (Peter Zijlstra)
- Report the different kinds of imbalances in /proc/schedstat (Swapnil Sapkal)
- Move sched domain name out of CONFIG_SCHED_DEBUG (Swapnil Sapkal)
- Update Schedstat version to 17 (Swapnil Sapkal)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=5ZNW
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2025-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Fair scheduler (SCHED_FAIR) enhancements:
- Behavioral improvements:
- Untangle NEXT_BUDDY and pick_next_task() (Peter Zijlstra)
- Delayed-dequeue enhancements & fixes: (Vincent Guittot)
- Rename h_nr_running into h_nr_queued
- Add new cfs_rq.h_nr_runnable
- Use the new cfs_rq.h_nr_runnable
- Removed unsued cfs_rq.h_nr_delayed
- Rename cfs_rq.idle_h_nr_running into h_nr_idle
- Remove unused cfs_rq.idle_nr_running
- Rename cfs_rq.nr_running into nr_queued
- Do not try to migrate delayed dequeue task
- Fix variable declaration position
- Encapsulate set custom slice in a __setparam_fair() function
- Fixes:
- Fix race between yield_to() and try_to_wake_up() (Tianchen Ding)
- Fix CPU bandwidth limit bypass during CPU hotplug (Vishal
Chourasia)
- Cleanups:
- Clean up in migrate_degrades_locality() to improve readability
(Peter Zijlstra)
- Mark m*_vruntime() with __maybe_unused (Andy Shevchenko)
- Update comments after sched_tick() rename (Sebastian Andrzej
Siewior)
- Remove CONFIG_CFS_BANDWIDTH=n definition of cfs_bandwidth_used()
(Valentin Schneider)
Deadline scheduler (SCHED_DL) enhancements:
- Restore dl_server bandwidth on non-destructive root domain changes
(Juri Lelli)
- Correctly account for allocated bandwidth during hotplug (Juri
Lelli)
- Check bandwidth overflow earlier for hotplug (Juri Lelli)
- Clean up goto label in pick_earliest_pushable_dl_task() (John
Stultz)
- Consolidate timer cancellation (Wander Lairson Costa)
Load-balancer enhancements:
- Improve performance by prioritizing migrating eligible tasks in
sched_balance_rq() (Hao Jia)
- Do not compute NUMA Balancing stats unnecessarily during
load-balancing (K Prateek Nayak)
- Do not compute overloaded status unnecessarily during
load-balancing (K Prateek Nayak)
Generic scheduling code enhancements:
- Use READ_ONCE() in task_on_rq_queued(), to consistently use the
WRITE_ONCE() updated ->on_rq field (Harshit Agarwal)
Isolated CPUs support enhancements: (Waiman Long)
- Make "isolcpus=nohz" equivalent to "nohz_full"
- Consolidate housekeeping cpumasks that are always identical
- Remove HK_TYPE_SCHED
- Unify HK_TYPE_{TIMER|TICK|MISC} to HK_TYPE_KERNEL_NOISE
RSEQ enhancements:
- Validate read-only fields under DEBUG_RSEQ config (Mathieu
Desnoyers)
PSI enhancements:
- Fix race when task wakes up before psi_sched_switch() adjusts flags
(Chengming Zhou)
IRQ time accounting performance enhancements: (Yafang Shao)
- Define sched_clock_irqtime as static key
- Don't account irq time if sched_clock_irqtime is disabled
Virtual machine scheduling enhancements:
- Don't try to catch up excess steal time (Suleiman Souhlal)
Heterogenous x86 CPU scheduling enhancements: (K Prateek Nayak)
- Convert "sysctl_sched_itmt_enabled" to boolean
- Use guard() for itmt_update_mutex
- Move the "sched_itmt_enabled" sysctl to debugfs
- Remove x86_smt_flags and use cpu_smt_flags directly
- Use x86_sched_itmt_flags for PKG domain unconditionally
Debugging code & instrumentation enhancements:
- Change need_resched warnings to pr_err() (David Rientjes)
- Print domain name in /proc/schedstat (K Prateek Nayak)
- Fix value reported by hot tasks pulled in /proc/schedstat (Peter
Zijlstra)
- Report the different kinds of imbalances in /proc/schedstat
(Swapnil Sapkal)
- Move sched domain name out of CONFIG_SCHED_DEBUG (Swapnil Sapkal)
- Update Schedstat version to 17 (Swapnil Sapkal)"
* tag 'sched-core-2025-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (48 commits)
rseq: Fix rseq unregistration regression
psi: Fix race when task wakes up before psi_sched_switch() adjusts flags
sched, psi: Don't account irq time if sched_clock_irqtime is disabled
sched: Don't account irq time if sched_clock_irqtime is disabled
sched: Define sched_clock_irqtime as static key
sched/fair: Do not compute overloaded status unnecessarily during lb
sched/fair: Do not compute NUMA Balancing stats unnecessarily during lb
x86/topology: Use x86_sched_itmt_flags for PKG domain unconditionally
x86/topology: Remove x86_smt_flags and use cpu_smt_flags directly
x86/itmt: Move the "sched_itmt_enabled" sysctl to debugfs
x86/itmt: Use guard() for itmt_update_mutex
x86/itmt: Convert "sysctl_sched_itmt_enabled" to boolean
sched/core: Prioritize migrating eligible tasks in sched_balance_rq()
sched/debug: Change need_resched warnings to pr_err
sched/fair: Encapsulate set custom slice in a __setparam_fair() function
sched: Fix race between yield_to() and try_to_wake_up()
docs: Update Schedstat version to 17
sched/stats: Print domain name in /proc/schedstat
sched: Move sched domain name out of CONFIG_SCHED_DEBUG
sched: Report the different kinds of imbalances in /proc/schedstat
...
of the "disablelapic" boot parameter.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmePTD8RHG1pbmdvQGtl
cm5lbC5vcmcACgkQEnMQ0APhK1jf5g//Wo1WKUXukRrBANr2nIlx9B7xJliRmUxv
mJ0VKo49YPl6C34fjSHhBs3+nPbYD+CyWVKAz5PqkfkFRGBgpQi26EnyKaIhLVFW
HWhW5vQm/FJfzBIrfFg7g/H1PK+rEYa4mv8JF9vhwp7BOfuqx4ABGKWQnrvOGg2B
VivE5k7/kxWRPTg45Kgb1iwlS2gcfWCRi9qdCzdJgY/4XYE6k6hKeV0PgTT3Vojf
pZKsgZRq8tzMaX75obtyyrX3TWj0nkRec0XbgyXBFvlFh/l3e0RswxzGGAjrC1XP
R+qmscdCkczUwRGc1mGj9MoCqMRRffU6/hTNsjqu8o7Q2gzZzXWHcUc+X7UwOeKZ
2guxOj4iagdn7+mIso6uAjY+OOdFVw7/C8ysbCmwo3MiaDsfaK2NkdBoT2xDWuIw
NP/45RMpTIsgL0wG6upzXXApKgYxfWhNSq+oHDF4/TjWY4i779hjMghvtX1BI7yb
LXIh2SsRcnmEPl42UGaz6xmdmkulWZPPxI5rghixU48Eazkngfp7ZTHYpm5NFoRP
Qc3JNcKo7rGmkoo/sA7uwawjnaTz/H77SDNjfAufzjVAKidvUqW6xaK/8JM1fq0n
du+9sQN5MrAqdKx5Lu624s/7ektwkDeUdQFGazqS9y0GBT25T9Rw+LQDuec7BG3p
v8sok4IaPA0=
=Hzj3
-----END PGP SIGNATURE-----
Merge tag 'x86-cleanups-2025-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Ingo Molnar:
"Miscellaneous x86 cleanups and typo fixes, and also the removal of
the 'disablelapic' boot parameter"
* tag 'x86-cleanups-2025-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ioapic: Remove a stray tab in the IO-APIC type string
x86/cpufeatures: Remove "AMD" from the comments to the AMD-specific leaf
Documentation/kernel-parameters: Fix a typo in kvm.enable_virt_at_load text
x86/cpu: Fix typo in x86_match_cpu()'s doc
x86/apic: Remove "disablelapic" cmdline option
Documentation: Merge x86-specific boot options doc into kernel-parameters.txt
x86/ioremap: Remove unused size parameter in remapping functions
x86/ioremap: Simplify setup_data mapping variants
x86/boot/compressed: Remove unused header includes from kaslr.c
- Seqlock optimizations that arose in a perf context and were
merged into the perf tree:
- seqlock: Add raw_seqcount_try_begin (Suren Baghdasaryan)
- mm: Convert mm_lock_seq to a proper seqcount ((Suren Baghdasaryan)
- mm: Introduce mmap_lock_speculate_{try_begin|retry} (Suren Baghdasaryan)
- mm/gup: Use raw_seqcount_try_begin() (Peter Zijlstra)
- Core perf enhancements:
- Reduce 'struct page' footprint of perf by mapping pages
in advance (Lorenzo Stoakes)
- Save raw sample data conditionally based on sample type (Yabin Cui)
- Reduce sampling overhead by checking sample_type in
perf_sample_save_callchain() and perf_sample_save_brstack() (Yabin Cui)
- Export perf_exclude_event() (Namhyung Kim)
- Uprobes scalability enhancements: (Andrii Nakryiko)
- Simplify find_active_uprobe_rcu() VMA checks
- Add speculative lockless VMA-to-inode-to-uprobe resolution
- Simplify session consumer tracking
- Decouple return_instance list traversal and freeing
- Ensure return_instance is detached from the list before freeing
- Reuse return_instances between multiple uretprobes within task
- Guard against kmemdup() failing in dup_return_instance()
- AMD core PMU driver enhancements:
- Relax privilege filter restriction on AMD IBS (Namhyung Kim)
- AMD RAPL energy counters support: (Dhananjay Ugwekar)
- Introduce topology_logical_core_id() (K Prateek Nayak)
- Remove the unused get_rapl_pmu_cpumask() function
- Remove the cpu_to_rapl_pmu() function
- Rename rapl_pmu variables
- Make rapl_model struct global
- Add arguments to the init and cleanup functions
- Modify the generic variable names to *_pkg*
- Remove the global variable rapl_msrs
- Move the cntr_mask to rapl_pmus struct
- Add core energy counter support for AMD CPUs
- Intel core PMU driver enhancements:
- Support RDPMC 'metrics clear mode' feature (Kan Liang)
- Clarify adaptive PEBS processing (Kan Liang)
- Factor out functions for PEBS records processing (Kan Liang)
- Simplify the PEBS records processing for adaptive PEBS (Kan Liang)
- Intel uncore driver enhancements: (Kan Liang)
- Convert buggy pmu->func_id use to pmu->registered
- Support more units on Granite Rapids
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=c8XB
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2025-01-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull performance events updates from Ingo Molnar:
"Seqlock optimizations that arose in a perf context and were merged
into the perf tree:
- seqlock: Add raw_seqcount_try_begin (Suren Baghdasaryan)
- mm: Convert mm_lock_seq to a proper seqcount (Suren Baghdasaryan)
- mm: Introduce mmap_lock_speculate_{try_begin|retry} (Suren
Baghdasaryan)
- mm/gup: Use raw_seqcount_try_begin() (Peter Zijlstra)
Core perf enhancements:
- Reduce 'struct page' footprint of perf by mapping pages in advance
(Lorenzo Stoakes)
- Save raw sample data conditionally based on sample type (Yabin Cui)
- Reduce sampling overhead by checking sample_type in
perf_sample_save_callchain() and perf_sample_save_brstack() (Yabin
Cui)
- Export perf_exclude_event() (Namhyung Kim)
Uprobes scalability enhancements: (Andrii Nakryiko)
- Simplify find_active_uprobe_rcu() VMA checks
- Add speculative lockless VMA-to-inode-to-uprobe resolution
- Simplify session consumer tracking
- Decouple return_instance list traversal and freeing
- Ensure return_instance is detached from the list before freeing
- Reuse return_instances between multiple uretprobes within task
- Guard against kmemdup() failing in dup_return_instance()
AMD core PMU driver enhancements:
- Relax privilege filter restriction on AMD IBS (Namhyung Kim)
AMD RAPL energy counters support: (Dhananjay Ugwekar)
- Introduce topology_logical_core_id() (K Prateek Nayak)
- Remove the unused get_rapl_pmu_cpumask() function
- Remove the cpu_to_rapl_pmu() function
- Rename rapl_pmu variables
- Make rapl_model struct global
- Add arguments to the init and cleanup functions
- Modify the generic variable names to *_pkg*
- Remove the global variable rapl_msrs
- Move the cntr_mask to rapl_pmus struct
- Add core energy counter support for AMD CPUs
Intel core PMU driver enhancements:
- Support RDPMC 'metrics clear mode' feature (Kan Liang)
- Clarify adaptive PEBS processing (Kan Liang)
- Factor out functions for PEBS records processing (Kan Liang)
- Simplify the PEBS records processing for adaptive PEBS (Kan Liang)
Intel uncore driver enhancements: (Kan Liang)
- Convert buggy pmu->func_id use to pmu->registered
- Support more units on Granite Rapids"
* tag 'perf-core-2025-01-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
perf: map pages in advance
perf/x86/intel/uncore: Support more units on Granite Rapids
perf/x86/intel/uncore: Clean up func_id
perf/x86/intel: Support RDPMC metrics clear mode
uprobes: Guard against kmemdup() failing in dup_return_instance()
perf/x86: Relax privilege filter restriction on AMD IBS
perf/core: Export perf_exclude_event()
uprobes: Reuse return_instances between multiple uretprobes within task
uprobes: Ensure return_instance is detached from the list before freeing
uprobes: Decouple return_instance list traversal and freeing
uprobes: Simplify session consumer tracking
uprobes: add speculative lockless VMA-to-inode-to-uprobe resolution
uprobes: simplify find_active_uprobe_rcu() VMA checks
mm: introduce mmap_lock_speculate_{try_begin|retry}
mm: convert mm_lock_seq to a proper seqcount
mm/gup: Use raw_seqcount_try_begin()
seqlock: add raw_seqcount_try_begin
perf/x86/rapl: Add core energy counter support for AMD CPUs
perf/x86/rapl: Move the cntr_mask to rapl_pmus struct
perf/x86/rapl: Remove the global variable rapl_msrs
...
which is legacy now, and the creation of the new AMD node concept which
represents the Zen architecture of having a collection of I/O devices within
an SoC. Those nodes comprise the so-called data fabric on Zen. This has
at least one practical advantage of not having to add a PCI ID each time
a new data fabric PCI device releases. Eventually, the lot more uniform
provider of data fabric functionality amd_node.c will be used by all the
drivers which need it
- Smaller cleanups
-----BEGIN PGP SIGNATURE-----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=ZAjD
-----END PGP SIGNATURE-----
Merge tag 'x86_misc_for_v6.14_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 updates from Borislav Petkov:
- The first part of a restructuring of AMD's representation of a
northbridge which is legacy now, and the creation of the new AMD node
concept which represents the Zen architecture of having a collection
of I/O devices within an SoC. Those nodes comprise the so-called data
fabric on Zen.
This has at least one practical advantage of not having to add a PCI
ID each time a new data fabric PCI device releases. Eventually, the
lot more uniform provider of data fabric functionality amd_node.c
will be used by all the drivers which need it
- Smaller cleanups
* tag 'x86_misc_for_v6.14_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/amd_node: Use defines for SMN register offsets
x86/amd_node: Remove dependency on AMD_NB
x86/amd_node: Update __amd_smn_rw() error paths
x86/amd_nb: Move SMN access code to a new amd_node driver
x86/amd_nb, hwmon: (k10temp): Simplify amd_pci_dev_to_node_id()
x86/amd_nb: Simplify function 3 search
x86/amd_nb: Use topology info to get AMD node count
x86/amd_nb: Simplify root device search
x86/amd_nb: Simplify function 4 search
x86: Start moving AMD node functionality out of AMD_NB
x86/amd_nb: Clean up early_is_amd_nb()
x86/amd_nb: Restrict init function to AMD-based systems
x86/mtrr: Rename mtrr_overwrite_state() to guest_force_mtrr_state()
use the generic struct x86_cpu_id thing
- Remove magic naked numbers for CPUID functions and use proper defines of the
prefix CPUID_LEAF_*. Consolidate some of the crazy use around the tree
- Smaller cleanups and improvements
-----BEGIN PGP SIGNATURE-----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=9Hdg
-----END PGP SIGNATURE-----
Merge tag 'x86_cpu_for_v6.14_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpuid updates from Borislav Petkov:
- Remove the less generic CPU matching infra around struct x86_cpu_desc
and use the generic struct x86_cpu_id thing
- Remove magic naked numbers for CPUID functions and use proper defines
of the prefix CPUID_LEAF_*. Consolidate some of the crazy use around
the tree
- Smaller cleanups and improvements
* tag 'x86_cpu_for_v6.14_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Make all all CPUID leaf names consistent
x86/fpu: Remove unnecessary CPUID level check
x86/fpu: Move CPUID leaf definitions to common code
x86/tsc: Remove CPUID "frequency" leaf magic numbers.
x86/tsc: Move away from TSC leaf magic numbers
x86/cpu: Move TSC CPUID leaf definition
x86/cpu: Refresh DCA leaf reading code
x86/cpu: Remove unnecessary MwAIT leaf checks
x86/cpu: Use MWAIT leaf definition
x86/cpu: Move MWAIT leaf definition to common header
x86/cpu: Remove 'x86_cpu_desc' infrastructure
x86/cpu: Move AMD erratum 1386 table over to 'x86_cpu_id'
x86/cpu: Replace PEBS use of 'x86_cpu_desc' use with 'x86_cpu_id'
x86/cpu: Expose only stepping min/max interface
x86/cpu: Introduce new microcode matching helper
x86/cpufeature: Document cpu_feature_enabled() as the default to use
x86/paravirt: Remove the WBINVD callback
x86/cpufeatures: Free up unused feature bits
table of sorts which contains per-node descriptors of each node-local
4K page, denoting its ownership (hypervisor, guest, etc) in the realm
of confidential computing. Add support for such a table in order to
improve referential locality when accessing or modifying RMP table
entries
- Add support for reading the TSC in SNP guests by removing any
interference or influence the hypervisor might have, with the goal of
making a confidential guest even more independent from the hypervisor
-----BEGIN PGP SIGNATURE-----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=hh1m
-----END PGP SIGNATURE-----
Merge tag 'x86_sev_for_v6.14_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SEV updates from Borislav Petkov:
- A segmented Reverse Map table (RMP) is a across-nodes distributed
table of sorts which contains per-node descriptors of each node-local
4K page, denoting its ownership (hypervisor, guest, etc) in the realm
of confidential computing. Add support for such a table in order to
improve referential locality when accessing or modifying RMP table
entries
- Add support for reading the TSC in SNP guests by removing any
interference or influence the hypervisor might have, with the goal of
making a confidential guest even more independent from the hypervisor
* tag 'x86_sev_for_v6.14_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev: Add the Secure TSC feature for SNP guests
x86/tsc: Init the TSC for Secure TSC guests
x86/sev: Mark the TSC in a secure TSC guest as reliable
x86/sev: Prevent RDTSC/RDTSCP interception for Secure TSC enabled guests
x86/sev: Prevent GUEST_TSC_FREQ MSR interception for Secure TSC enabled guests
x86/sev: Change TSC MSR behavior for Secure TSC enabled guests
x86/sev: Add Secure TSC support for SNP guests
x86/sev: Relocate SNP guest messaging routines to common code
x86/sev: Carve out and export SNP guest messaging init routines
virt: sev-guest: Replace GFP_KERNEL_ACCOUNT with GFP_KERNEL
virt: sev-guest: Remove is_vmpck_empty() helper
x86/sev/docs: Document the SNP Reverse Map Table (RMP)
x86/sev: Add full support for a segmented RMP table
x86/sev: Treat the contiguous RMP table as a single RMP segment
x86/sev: Map only the RMP table entries instead of the full RMP range
x86/sev: Move the SNP probe routine out of the way
x86/sev: Require the RMPREAD instruction after Zen4
x86/sev: Add support for the RMPREAD instruction
x86/sev: Prepare for using the RMPREAD instruction to access the RMP
-----BEGIN PGP SIGNATURE-----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=xrfO
-----END PGP SIGNATURE-----
Merge tag 'x86_microcode_for_v6.14_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 microcode loader updates from Borislav Petkov:
- A bunch of minor cleanups
* tag 'x86_microcode_for_v6.14_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode/AMD: Remove ret local var in early_apply_microcode()
x86/microcode/AMD: Have __apply_microcode_amd() return bool
x86/microcode/AMD: Make __verify_patch_size() return bool
x86/microcode/AMD: Remove bogus comment from parse_container()
x86/microcode/AMD: Return bool from find_blobs_in_containers()
thus accomodating systems which support only total but not local memory
bandwidth monitoring. Add the respective new mount options
- The usual cleanups
-----BEGIN PGP SIGNATURE-----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=i4Yw
-----END PGP SIGNATURE-----
Merge tag 'x86_cache_for_v6.14_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 resource control updates from Borislav Petkov:
- Extend resctrl with the capability of total memory bandwidth
monitoring, thus accomodating systems which support only total but
not local memory bandwidth monitoring. Add the respective new mount
options
- The usual cleanups
* tag 'x86_cache_for_v6.14_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/resctrl: Document the new "mba_MBps_event" file
x86/resctrl: Add write option to "mba_MBps_event" file
x86/resctrl: Add "mba_MBps_event" file to CTRL_MON directories
x86/resctrl: Make mba_sc use total bandwidth if local is not supported
x86/resctrl: Compute memory bandwidth for all supported events
x86/resctrl: Modify update_mba_bw() to use per CTRL_MON group event
x86/resctrl: Prepare for per-CTRL_MON group mba_MBps control
x86/resctrl: Introduce resctrl_file_fflags_init() to initialize fflags
x86/resctrl: Use kthread_run_on_cpu()
user/kernel attack vector and advertise it to guest userspace
-----BEGIN PGP SIGNATURE-----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=bWI/
-----END PGP SIGNATURE-----
Merge tag 'x86_bugs_for_v6.14_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 CPU speculation update from Borislav Petkov:
- Add support for AMD hardware which is not affected by SRSO on the
user/kernel attack vector and advertise it to guest userspace
* tag 'x86_bugs_for_v6.14_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
KVM: x86: Advertise SRSO_USER_KERNEL_NO to userspace
x86/bugs: Add SRSO_USER_KERNEL_NO support
- Cleanup and sanitize MCA code
-----BEGIN PGP SIGNATURE-----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=hSqE
-----END PGP SIGNATURE-----
Merge tag 'ras_core_for_v6.14_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 RAS updates from Borislav Petkov:
- Remove the shared threshold bank hack on AMD and streamline and
simplify it
- Cleanup and sanitize MCA code
* tag 'ras_core_for_v6.14_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce/amd: Remove shared threshold bank plumbing
x86/mce: Remove the redundant mce_hygon_feature_init()
x86/mce: Convert family/model mixed checks to VFM-based checks
x86/mce: Break up __mcheck_cpu_apply_quirks()
x86/mce: Make four functions return bool
x86/mce/threshold: Remove the redundant this_cpu_dec_return()
x86/mce: Make several functions return bool
This was a suggestion by David Laight, and while I was slightly worried
that some micro-architecture would predict cmov like a conditional
branch, there is little reason to actually believe any core would be
that broken.
Intel documents that their existing cores treat CMOVcc as a data
dependency that will constrain speculation in their "Speculative
Execution Side Channel Mitigations" whitepaper:
"Other instructions such as CMOVcc, AND, ADC, SBB and SETcc can also
be used to prevent bounds check bypass by constraining speculative
execution on current family 6 processors (Intel® Core™, Intel® Atom™,
Intel® Xeon® and Intel® Xeon Phi™ processors)"
and while that leaves the future uarch issues open, that's certainly
true of our traditional SBB usage too.
Any core that predicts CMOV will be unusable for various crypto
algorithms that need data-independent timing stability, so let's just
treat CMOV as the safe choice that simplifies the address masking by
avoiding an extra instruction and doesn't need a temporary register.
Suggested-by: David Laight <David.Laight@aculab.com>
Link: https://www.intel.com/content/dam/develop/external/us/en/documents/336996-speculative-execution-side-channel-mitigations.pdf
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Back when we added SMAP support, all versions of binutils didn't
necessarily understand the 'clac' and 'stac' instructions. So we
implemented those instructions manually as ".byte" sequences.
But we've since upgraded the minimum version of binutils to version
2.25, and that included proper support for the SMAP instructions, and
there's no reason for us to use some line noise to express them any
more.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As part of enabling TDX virtual machines, support support separation of
private/shared EPT into separate roots.
Confidential computing solutions almost invariably have concepts of
private and shared memory, but they may different a lot in the details.
In SEV, for example, the bit is handled more like a permission bit as
far as the page tables are concerned: the private/shared bit is not
included in the physical address.
For TDX, instead, the bit is more like a physical address bit, with
the host mapping private memory in one half of the address space and
shared in another. Furthermore, the two halves are mapped by different
EPT roots and only the shared half is managed by KVM; the private half
(also called Secure EPT in Intel documentation) gets managed by the
privileged TDX Module via SEAMCALLs.
As a result, the operations that actually change the private half of
the EPT are limited and relatively slow compared to reading a PTE. For
this reason the design for KVM is to keep a mirror of the private EPT in
host memory. This allows KVM to quickly walk the EPT and only perform the
slower private EPT operations when it needs to actually modify mid-level
private PTEs.
There are thus three sets of EPT page tables: external, mirror and
direct. In the case of TDX (the only user of this framework) the
first two cover private memory, whereas the third manages shared
memory:
external EPT - Hidden within the TDX module, modified via TDX module
calls.
mirror EPT - Bookkeeping tree used as an optimization by KVM, not
used by the processor.
direct EPT - Normal EPT that maps unencrypted shared memory.
Managed like the EPT of a normal VM.
Modifying external EPT
----------------------
Modifications to the mirrored page tables need to also perform the
same operations to the private page tables, which will be handled via
kvm_x86_ops. Although this prep series does not interact with the TDX
module at all to actually configure the private EPT, it does lay the
ground work for doing this.
In some ways updating the private EPT is as simple as plumbing PTE
modifications through to also call into the TDX module; however, the
locking is more complicated because inserting a single PTE cannot anymore
be done atomically with a single CMPXCHG. For this reason, the existing
FROZEN_SPTE mechanism is used whenever a call to the TDX module updates the
private EPT. FROZEN_SPTE acts basically as a spinlock on a PTE. Besides
protecting operation of KVM, it limits the set of cases in which the
TDX module will encounter contention on its own PTE locks.
Zapping external EPT
--------------------
While the framework tries to be relatively generic, and to be
understandable without knowing TDX much in detail, some requirements of
TDX sometimes leak; for example the private page tables also cannot be
zapped while the range has anything mapped, so the mirrored/private page
tables need to be protected from KVM operations that zap any non-leaf
PTEs, for example kvm_mmu_reset_context() or kvm_mmu_zap_all_fast().
For normal VMs, guest memory is zapped for several reasons: user
memory getting paged out by the guest, memslots getting deleted,
passthrough of devices with non-coherent DMA. Confidential computing
adds to these the conversion of memory between shared and privates. These
operations must not zap any private memory that is in use by the guest.
This is possible because the only zapping that is out of the control
of KVM/userspace is paging out userspace memory, which cannot apply to
guestmemfd operations. Thus a TDX VM will only zap private memory from
memslot deletion and from conversion between private and shared memory
which is triggered by the guest.
To avoid zapping too much memory, enums are introduced so that operations
can choose to target only private or shared memory, and thus only
direct or mirror EPT. For example:
Memslot deletion - Private and shared
MMU notifier based zapping - Shared only
Conversion to shared - Private only
Conversion to private - Shared only
Other cases of zapping will not be supported for KVM, for example
APICv update or non-coherent DMA status update; for the latter, TDX will
simply require that the CPU supports self-snoop and honor guest PAT
unconditionally for shared memory.
Make the completion of hypercalls go through the complete_hypercall
function pointer argument, no matter if the hypercall exits to
userspace or not. Previously, the code assumed that KVM_HC_MAP_GPA_RANGE
specifically went to userspace, and all the others did not; the new code
need not special case KVM_HC_MAP_GPA_RANGE and in fact does not care at
all whether there was an exit to userspace or not.
- Overhaul KVM's CPUID feature infrastructure to replace "governed" features
with per-vCPU tracking of the vCPU's capabailities for all features. Along
the way, refactor the code to make it easier to add/modify features, and
add a variety of self-documenting macro types to again simplify adding new
features and to help readers understand KVM's handling of existing features.
- Rework KVM's handling of VM-Exits during event vectoring to plug holes where
KVM unintentionally puts the vCPU into infinite loops in some scenarios,
e.g. if emulation is triggered by the exit, and to bring parity between VMX
and SVM.
- Add pending request and interrupt injection information to the kvm_exit and
kvm_entry tracepoints respectively.
- Fix a relatively benign flaw where KVM would end up redoing RDPKRU when
loading guest/host PKRU due to a refactoring of the kernel helpers that
didn't account for KVM's pre-checking of the need to do WRPKRU.
-----BEGIN PGP SIGNATURE-----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=32mM
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-misc-6.14' of https://github.com/kvm-x86/linux into HEAD
KVM x86 misc changes for 6.14:
- Overhaul KVM's CPUID feature infrastructure to track all vCPU capabilities
instead of just those where KVM needs to manage state and/or explicitly
enable the feature in hardware. Along the way, refactor the code to make
it easier to add features, and to make it more self-documenting how KVM
is handling each feature.
- Rework KVM's handling of VM-Exits during event vectoring; this plugs holes
where KVM unintentionally puts the vCPU into infinite loops in some scenarios
(e.g. if emulation is triggered by the exit), and brings parity between VMX
and SVM.
- Add pending request and interrupt injection information to the kvm_exit and
kvm_entry tracepoints respectively.
- Fix a relatively benign flaw where KVM would end up redoing RDPKRU when
loading guest/host PKRU, due to a refactoring of the kernel helpers that
didn't account for KVM's pre-checking of the need to do WRPKRU.
- Fix a bug where KVM updates hardware's APICv cache of the highest ISR bit
while L2 is active, while ultimately results in a hardware-accelerated L1
EOI effectively being lost.
- Honor event priority when emulating Posted Interrupt delivery during nested
VM-Enter by queueing KVM_REQ_EVENT instead of immediately handling the
interrupt.
- Drop kvm_x86_ops.hwapic_irr_update() as KVM updates hardware's APICv cache
prior to every VM-Enter.
- Rework KVM's processing of the Page-Modification Logging buffer to reap
entries in the same order they were created, i.e. to mark gfns dirty in the
same order that hardware marked the page/PTE dirty.
- Misc cleanups.
-----BEGIN PGP SIGNATURE-----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=PSfy
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-vmx-6.14' of https://github.com/kvm-x86/linux into HEAD
KVM VMX changes for 6.14:
- Fix a bug where KVM updates hardware's APICv cache of the highest ISR bit
while L2 is active, while ultimately results in a hardware-accelerated L1
EOI effectively being lost.
- Honor event priority when emulating Posted Interrupt delivery during nested
VM-Enter by queueing KVM_REQ_EVENT instead of immediately handling the
interrupt.
- Drop kvm_x86_ops.hwapic_irr_update() as KVM updates hardware's APICv cache
prior to every VM-Enter.
- Rework KVM's processing of the Page-Modification Logging buffer to reap
entries in the same order they were created, i.e. to mark gfns dirty in the
same order that hardware marked the page/PTE dirty.
- Misc cleanups.
- Macrofy the SEV=n version of the sev_xxx_guest() helpers so that the code is
optimized away when building with less than brilliant compilers.
- Remove a now-redundant TLB flush when guest CR4.PGE changes.
- Use str_enabled_disabled() to replace open coded strings.
-----BEGIN PGP SIGNATURE-----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=MhtD
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-svm-6.14' of https://github.com/kvm-x86/linux into HEAD
KVM SVM changes for 6.14:
- Macrofy the SEV=n version of the sev_xxx_guest() helpers so that the code is
optimized away when building with less than brilliant compilers.
- Remove a now-redundant TLB flush when guest CR4.PGE changes.
- Use str_enabled_disabled() to replace open coded strings.
- Add a comment to kvm_mmu_do_page_fault() to explain why KVM performs a
direct call to kvm_tdp_page_fault() when RETPOLINE is enabled.
-----BEGIN PGP SIGNATURE-----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=XaOP
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-mmu-6.14' of https://github.com/kvm-x86/linux into HEAD
KVM x86 MMU changes for 6.14:
- Add a comment to kvm_mmu_do_page_fault() to explain why KVM performs a
direct call to kvm_tdp_page_fault() when RETPOLINE is enabled.
- Add proper lockdep assertions when setting memory regions.
- Add a dedicated API for setting KVM-internal memory regions.
- Explicitly disallow all flags for KVM-internal memory regions.
-----BEGIN PGP SIGNATURE-----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=Dqql
-----END PGP SIGNATURE-----
Merge tag 'kvm-memslots-6.14' of https://github.com/kvm-x86/linux into HEAD
KVM kvm_set_memory_region() cleanups and hardening for 6.14:
- Add proper lockdep assertions when setting memory regions.
- Add a dedicated API for setting KVM-internal memory regions.
- Explicitly disallow all flags for KVM-internal memory regions.
code
- Make sure FRED's RSP0 MSR is synchronized with its corresponding per-CPU
value in order to avoid double faults in hotplug scenarios
- Disable EXECMEM_ROX on x86 for now because it didn't receive proper x86
maintainers review, went in and broke a bunch of things
-----BEGIN PGP SIGNATURE-----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=b6qH
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Mark serialize() noinstr so that it can be used from instrumentation-
free code
- Make sure FRED's RSP0 MSR is synchronized with its corresponding
per-CPU value in order to avoid double faults in hotplug scenarios
- Disable EXECMEM_ROX on x86 for now because it didn't receive proper
x86 maintainers review, went in and broke a bunch of things
* tag 'x86_urgent_for_v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/asm: Make serialize() always_inline
x86/fred: Fix the FRED RSP0 MSR out of sync with its per-CPU cache
x86: Disable EXECMEM_ROX support
Instead of marking individual interrupts as safe to be migrated in
arbitrary contexts, mark the interrupt chips, which require the interrupt
to be moved in actual interrupt context, with the new IRQCHIP_MOVE_DEFERRED
flag. This makes more sense because this is a per interrupt chip property
and not restricted to individual interrupts.
That flips the logic from the historical opt-out to a opt-in model. This is
simpler to handle for other architectures, which default to unrestricted
affinity setting. It also allows to cleanup the redundant core logic
significantly.
All interrupt chips, which belong to a top-level domain sitting directly on
top of the x86 vector domain are marked accordingly, unless the related
setup code marks the interrupts with IRQ_MOVE_PCNTXT, i.e. XEN.
No functional change intended.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steve Wahl <steve.wahl@hpe.com>
Acked-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/all/20241210103335.563277044@linutronix.de
Return RET_PF* (excluding RET_PF_EMULATE/RET_PF_CONTINUE/RET_PF_INVALID)
instead of 1 in kvm_mmu_page_fault().
The callers of kvm_mmu_page_fault() are KVM page fault handlers (i.e.,
npf_interception(), handle_ept_misconfig(), __vmx_handle_ept_violation(),
kvm_handle_page_fault()). They either check if the return value is > 0 (as
in npf_interception()) or pass it further to vcpu_run() to decide whether
to break out of the kernel loop and return to the user when r <= 0.
Therefore, returning any positive value is equivalent to returning 1.
Warn if r == RET_PF_CONTINUE (which should not be a valid value) to ensure
a positive return value.
This is a preparation to allow TDX's EPT violation handler to check the
RET_PF* value and retry internally for RET_PF_RETRY.
No functional changes are intended.
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Message-ID: <20250113021138.18875-1-yan.y.zhao@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
intel_punit_ipc_simple_command() was added in 2015 by
commit fdca4f16f5 ("platform:x86: add Intel P-Unit mailbox IPC driver")
but never used.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20241221234807.160473-1-linux@treblig.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
commit 9d26d3a8f1 ("PCI: Put PCIe ports into D3 during suspend") sets the
policy that all PCIe ports are allowed to use D3. When the system is
suspended if the port is not power manageable by the platform and won't be
used for wakeup via a PME this sets up the policy for these ports to go
into D3hot.
This policy generally makes sense from an OSPM perspective but it leads to
problems with wakeup from suspend on the TUXEDO Sirius 16 Gen 1 with a
specific old BIOS. This manifests as a system hang.
On the affected Device + BIOS combination, add a quirk for the root port of
the problematic controller to ensure that these root ports are not put into
D3hot at suspend.
This patch is based on
https://lore.kernel.org/linux-pci/20230708214457.1229-2-mario.limonciello@amd.com
but with the added condition both in the documentation and in the code to
apply only to the TUXEDO Sirius 16 Gen 1 with a specific old BIOS and only
the affected root ports.
Fixes: 9d26d3a8f1 ("PCI: Put PCIe ports into D3 during suspend")
Suggested-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250114222436.1075456-1-wse@tuxedocomputers.com
Co-developed-by: Georg Gottleuber <ggo@tuxedocomputers.com>
Signed-off-by: Georg Gottleuber <ggo@tuxedocomputers.com>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Cc: <stable@vger.kernel.org> # 6.1+
Now that there's no outer wrapper for __kvm_set_memory_region() and it's
static, drop its double-underscore prefix.
No functional change intended.
Cc: Tao Su <tao1.su@linux.intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Link: https://lore.kernel.org/r/20250111002022.1230573-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a dedicated API for setting internal memslots, and have it explicitly
disallow setting userspace memslots. Setting a userspace memslots without
a direct command from userspace would result in all manner of issues.
No functional change intended.
Cc: Tao Su <tao1.su@linux.intel.com>
Cc: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Link: https://lore.kernel.org/r/20250111002022.1230573-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add proper lockdep assertions in __kvm_set_memory_region() and
__x86_set_memory_region() instead of relying comments.
Opportunistically delete __kvm_set_memory_region()'s entire function
comment as the API doesn't allocate memory or select a gfn, and the
"mostly for framebuffers" comment hasn't been true for a very long time.
Cc: Tao Su <tao1.su@linux.intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Link: https://lore.kernel.org/r/20250111002022.1230573-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
The FRED RSP0 MSR is only used for delivering events when running
userspace. Linux leverages this property to reduce expensive MSR
writes and optimize context switches. The kernel only writes the
MSR when about to run userspace *and* when the MSR has actually
changed since the last time userspace ran.
This optimization is implemented by maintaining a per-CPU cache of
FRED RSP0 and then checking that against the value for the top of
current task stack before running userspace.
However cpu_init_fred_exceptions() writes the MSR without updating
the per-CPU cache. This means that the kernel might return to
userspace with MSR_IA32_FRED_RSP0==0 when it needed to point to the
top of current task stack. This would induce a double fault (#DF),
which is bad.
A context switch after cpu_init_fred_exceptions() can paper over
the issue since it updates the cached value. That evidently
happens most of the time explaining how this bug got through.
Fix the bug through resynchronizing the FRED RSP0 MSR with its
per-CPU cache in cpu_init_fred_exceptions().
Fixes: fe85ee3919 ("x86/entry: Set FRED RSP0 on return to userspace instead of context switch")
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250110174639.1250829-1-xin%40zytor.com
Ftrace branch profiling inserts absolute references to its metadata at
call sites, and this implies that this kind of instrumentation cannot be
used while executing from the 1:1 mapping of memory.
Therefore, disable ftrace branch profiling in the SEV startup routines,
by disabling it for the entire SEV core source file.
Closes: https://lore.kernel.org/oe-kbuild-all/202501072244.zZrx9864-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20250107151826.820147-2-ardb+git@google.com
Both i386 and x86_64 now copy the relocate_kernel() function into the control
page and execute it from there, using an open-coded function pointer.
Use a typedef for it instead.
[ bp: Put relocate_kernel_ptr ptr arithmetic on a single line. ]
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20250109140757.2841269-10-dwmw2@infradead.org
A few places in the kexec control code page make the assumption that the first
instruction of relocate_kernel is at the very start of the page.
To allow for Clang CFI information to be added to relocate_kernel(), as well
as the general principle of removing unwarranted assumptions, fix them to use
the external __relocate_kernel_start symbol that the linker adds. This means
using a separate addq and subq for calculating offsets, as the assembler can
no longer calculate the delta directly for itself and relocations aren't that
versatile. But those values can at least be used relative to a local label to
avoid absolute relocations.
Turn the jump from relocate_kernel() to identity_mapped() into a real indirect
'jmp *%rsi' too, while touching it. There was no real reason for it to be
a push+ret in the first place, and adding Clang CFI info will also give
objtool enough visibility to start complaining 'return with modified stack
frame' about it.
[ bp: Massage commit message. ]
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20250109140757.2841269-9-dwmw2@infradead.org
A recent commit caused the relocate_kernel() function to be invoked through
a function pointer, but it does not have CFI information. The resulting trap
occurs after the IDT and GDT have been invalidated, leading to a triple-fault
if CONFIG_CFI_CLANG is enabled.
Using SYM_TYPED_FUNC_START() to provide the CFI information looks like it will
require a prolonged battle with objtool. And is fairly pointless anyway, as
the actual signature comes from a __kcfi_typeid_… symbol emitted from the
C code based on the function prototype it thinks that relocate_kernel has,
rendering the check somewhat tautological.
The simple fix is just to mark machine_kexec() with __nocfi.
Fixes: eeebbde571 ("x86/kexec: Invoke copy of relocate_kernel() instead of the original")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20250109140757.2841269-7-dwmw2@infradead.org
After commit
cb33ff9e06 ("x86/kexec: Move relocate_kernel to kernel .data section"),
kernels configured with an option that uses -ffunction-sections, such as
CONFIG_LTO_CLANG, crash when kexecing because the value of relocate_kernel
does not match the value of __relocate_kernel_start so incorrect code gets
copied via machine_kexec_prepare().
$ llvm-nm good-vmlinux &| rg relocate_kernel
ffffffff83280d41 T __relocate_kernel_end
ffffffff83280b00 T __relocate_kernel_start
ffffffff83280b00 T relocate_kernel
$ llvm-nm bad-vmlinux &| rg relocate_kernel
ffffffff83266100 D __relocate_kernel_end
ffffffff83266100 D __relocate_kernel_start
ffffffff8120b0d8 T relocate_kernel
When -ffunction-sections is enabled, TEXT_MAIN matches on
'.text.[0-9a-zA-Z_]*' to coalesce the function specific functions back
into .text during link time after they have been optimized. Due to the
placement of TEXT_TEXT before KEXEC_RELOCATE_KERNEL in the x86 linker
script, the .text.relocate_kernel section ends up in .text instead of
.data.
Use a second dot in the relocate_kernel section name to avoid matching
on TEXT_MAIN, which matches a similar situation that happened in
commit
79cd2a1122 ("x86/retpoline,kprobes: Fix position of thunk sections with CONFIG_LTO_CLANG"),
which allows kexec to function properly.
While .data.relocate_kernel still ends up in the .data section via
DATA_MAIN -> DATA_DATA, ensure it is located with the
.text.relocate_kernel section as intended by performing the same
transformation.
Fixes: cb33ff9e06 ("x86/kexec: Move relocate_kernel to kernel .data section")
Fixes: 8dbec5c77b ("x86/kexec: Add data section to relocate_kernel")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20250109140757.2841269-6-dwmw2@infradead.org
A ::preserve_context kimage can be invoked more than once, and the entry point
can be different every time. When the callee returns to the kernel, it leaves
the address of its entry point for next time on the stack.
That being the case, one might reasonably assume that the caller would
allocate space for it on the stack frame before actually performing the 'call'
into the callee.
Apparently not, though. Ever since the kjump code was first added in 2009, it
has set up a *new* stack at the top of the swap_page scratch page, then just
performed the 'call' without allocating any space for the re-entry address to
be returned. It then reads the re-entry point for next time from 0(%rsp) which
is actually the first qword of the page *after* the swap page, which might not
exist at all! And if the callee has written to that, then it will have
corrupted memory it doesn't own.
Correct this by pushing the entry point of the callee onto the stack before
calling it. The callee may then adjust it, or not, as it sees fit, and
subsequent invocations should work correctly either way.
Remove a stray push of zero to the *relocate_kernel* stack, which may have
been intended for this purpose, but which was actually just noise.
Also, loading the stack for the callee relied on the address of the swap page
being in %r10 without ever documenting that fact. Recent code changes made
that no longer true, so load it directly from the local kexec_pa_swap_page
variable instead.
Fixes: b3adabae8a ("x86/kexec: Drop page_list argument from relocate_kernel()")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20250109140757.2841269-5-dwmw2@infradead.org
The swap_pages function expects the swap page to be in %r10, but there
was no documentation to that effect. Once upon a time the setup code
used to load its value from a kernel virtual address and save it to an
address which is accessible in the identity-mapped page tables, and
*happened* to use %r10 to do so, with no comment that it was left there
on *purpose* instead of just being a scratch register. Once that was no
longer necessary, %r10 just holds whatever the kernel happened to leave
in it.
Now that the original value passed by the kernel is accessible via
%rip-relative addressing, load directly from there instead of using %r10
for it. But document the other parameters that the swap_pages function
*does* expect in registers.
Fixes: b3adabae8a ("x86/kexec: Drop page_list argument from relocate_kernel()")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20250109140757.2841269-4-dwmw2@infradead.org
The swap_pages() function will only actually *swap*, as its name implies, if
the preserve_context flag in the %r11 register is non-zero. On the way back
from a ::preserve_context kexec, ensure that the %r11 register is non-zero so
that the pages get swapped back.
Fixes: 9e5683e2d0 ("x86/kexec: Only swap pages for ::preserve_context mode")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20250109140757.2841269-3-dwmw2@infradead.org
The kernel switches to a new set of page tables during kexec. The global
mappings (_PAGE_GLOBAL==1) can remain in the TLB after this switch. This
is generally not a problem because the new page tables use a different
portion of the virtual address space than the normal kernel mappings.
The critical exception to that generalisation (and the only mapping
which isn't an identity mapping) is the kexec control page itself —
which was ROX in the original kernel mapping, but should be RWX in the
new page tables. If there is a global TLB entry for that in its prior
read-only state, it definitely needs to be flushed before attempting to
write through that virtual mapping.
It would be possible to just avoid writing to the virtual address of the
page and defer all writes until they can be done through the identity
mapping. But there's no good reason to keep the old TLB entries around,
as they can cause nothing but trouble.
Clear the PGE bit in %cr4 early, before storing data in the control page.
Fixes: 5a82223e07 ("x86/kexec: Mark relocate_kernel page as ROX instead of RWX")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219592
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reported-by: "Ning, Hongyu" <hongyu.ning@linux.intel.com>
Co-developed-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: "Ning, Hongyu" <hongyu.ning@linux.intel.com>
Link: https://lore.kernel.org/r/20250109140757.2841269-2-dwmw2@infradead.org
Use the LocateHandleBuffer() API and a __free() function to simplify the
logic that allocates a handle buffer to iterate over all GOP protocols
in the EFI database.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
UGA is the EFI graphical output protocol that preceded GOP, and has been
long obsolete. Drop support for it from the x86 implementation of the
EFI stub - other architectures never bothered to implement it (save for
ia64)
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The early_ioremap interface can fail and return NULL in certain cases. To
prevent NULL-pointer dereference crashes, fixed issues in the acpi_extlog
and copy_early_mem interfaces, improving robustness when handling early
memory.
Link: https://lkml.kernel.org/r/20241212101004.1544070-1-guoweikang.kernel@gmail.com
Signed-off-by: Guo Weikang <guoweikang.kernel@gmail.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Julian Stecklina <julian.stecklina@cyberus-technology.de>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Now, x86 has fully supported the CONFIG_PT_RECLAIM feature, and reclaiming
PTE pages is profitable only on 64-bit systems, so select
ARCH_SUPPORTS_PT_RECLAIM if X86_64.
Link: https://lkml.kernel.org/r/841c1f35478d5354872d307888979c9e20de9c09.1733305182.git.zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Peter Xu <peterx@redhat.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zach O'Keefe <zokeefe@google.com>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Now, if CONFIG_MMU_GATHER_RCU_TABLE_FREE is selected, the page table pages
will be freed by semi RCU, that is:
- batch table freeing: asynchronous free by RCU
- single table freeing: IPI + synchronous free
In this way, the page table can be lockless traversed by disabling IRQ in
paths such as fast GUP. But this is not enough to free the empty PTE page
table pages in paths other that munmap and exit_mmap path, because IPI
cannot be synchronized with rcu_read_lock() in pte_offset_map{_lock}().
In preparation for supporting empty PTE page table pages reclaimation, let
single table also be freed by RCU like batch table freeing. Then we can
also use pte_offset_map() etc to prevent PTE page from being freed.
Like pte_free_defer(), we can also safely use ptdesc->pt_rcu_head to free
the page table pages:
- The pt_rcu_head is unioned with pt_list and pmd_huge_pte.
- For pt_list, it is used to manage the PGD page in x86. Fortunately
tlb_remove_table() will not be used for free PGD pages, so it is safe
to use pt_rcu_head.
- For pmd_huge_pte, it is used for THPs, so it is safe.
After applying this patch, if CONFIG_PT_RECLAIM is enabled, the function
call of free_pte() is as follows:
free_pte
pte_free_tlb
__pte_free_tlb
___pte_free_tlb
paravirt_tlb_remove_table
tlb_remove_table [!CONFIG_PARAVIRT, Xen PV, Hyper-V, KVM]
[no-free-memory slowpath:]
tlb_table_invalidate
tlb_remove_table_one
__tlb_remove_table_one [frees via RCU]
[fastpath:]
tlb_table_flush
tlb_remove_table_free [frees via RCU]
native_tlb_remove_table [CONFIG_PARAVIRT on native]
tlb_remove_table [see above]
Link: https://lkml.kernel.org/r/0287d442a973150b0e1019cc406e6322d148277a.1733305182.git.zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Peter Xu <peterx@redhat.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zach O'Keefe <zokeefe@google.com>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
hpet_rtc_dropped_irq() has been unused since
commit f52ef24be2 ("rtc/alpha: remove legacy rtc driver")
Remove it in rtc, and x86 hpet code.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20241215022356.181625-1-linux@treblig.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
All patches are singletons - please see the relevant changelogs for
details.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZ4TI2QAKCRDdBJ7gKXxA
jgy1AP9fEyueoS8PpDe2Wil7/WPAVr6OVhgjEDx64OSUdxQE+wD6A7Q3TadqeBvx
GIKupDWYEodJL00DIFOFj/qRZgSW9Ao=
=Zr4s
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2025-01-13-00-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"18 hotfixes. 11 are cc:stable. 13 are MM and 5 are non-MM.
All patches are singletons - please see the relevant changelogs for
details"
* tag 'mm-hotfixes-stable-2025-01-13-00-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
fs/proc: fix softlockup in __read_vmcore (part 2)
mm: fix assertion in folio_end_read()
mm: vmscan : pgdemote vmstat is not getting updated when MGLRU is enabled.
vmstat: disable vmstat_work on vmstat_cpu_down_prep()
zram: fix potential UAF of zram table
selftests/mm: set allocated memory to non-zero content in cow test
mm: clear uffd-wp PTE/PMD state on mremap()
module: fix writing of livepatch relocations in ROX text
mm: zswap: properly synchronize freeing resources during CPU hotunplug
Revert "mm: zswap: fix race between [de]compression and CPU hotunplug"
hugetlb: fix NULL pointer dereference in trace_hugetlbfs_alloc_inode
mm: fix div by zero in bdi_ratio_from_pages
x86/execmem: fix ROX cache usage in Xen PV guests
filemap: avoid truncating 64-bit offset to 32 bits
tools: fix atomic_set() definition to set the value correctly
mm/mempolicy: count MPOL_WEIGHTED_INTERLEAVE to "interleave_hit"
scripts/decode_stacktrace.sh: fix decoding of lines with an additional info
mm/kmemleak: fix percpu memory leak detection failure
x86_sched_itmt_flags() returns SD_ASYM_PACKING if ITMT support is
enabled by the system. Without ITMT support being enabled, it returns 0
similar to current x86_die_flags() on non-Hybrid systems
(!X86_HYBRID_CPU and !X86_FEATURE_AMD_HETEROGENEOUS_CORES)
On Intel systems that enable ITMT support, either the MC domain
coincides with the PKG domain, or in case of multiple MC groups
within a PKG domain, either Sub-NUMA Cluster (SNC) is enabled or the
processor features Hybrid core layout (X86_HYBRID_CPU) which leads to
three distinct possibilities:
o If PKG and MC domains coincide, PKG domain is degenerated by
sd_parent_degenerate() when building sched domain topology.
o If SNC is enabled, PKG domain is never added since
"x86_has_numa_in_package" is set and the topology will instead contain
NODE and NUMA domains.
o On X86_HYBRID_CPU which contains multiple MC groups within the PKG,
the PKG domain requires x86_sched_itmt_flags().
Thus, on Intel systems that contains multiple MC groups within the PKG
and enables ITMT support, the PKG domain requires
x86_sched_itmt_flags(). In all other cases PKG domain is either never
added or is degenerated. Thus, returning x86_sched_itmt_flags()
unconditionally at PKG domain on Intel systems should not lead to any
functional changes.
On AMD systems with multiple LLCs (MC groups) within a PKG domain,
enabling ITMT support requires setting SD_ASYM_PACKING to the PKG domain
since the core rankings are assigned PKG-wide.
Core rankings on AMD processors is currently set by the amd-pstate
driver when Preferred Core feature is supported. A subset of systems that
support Preferred Core feature can be detected using
X86_FEATURE_AMD_HETEROGENEOUS_CORES however, this does not cover all the
systems that support Preferred Core ranking.
Detecting Preferred Core support on AMD systems requires inspecting CPPC
Highest Perf on all present CPUs and checking if it differs on at least
one CPU. Previous suggestion to use a synthetic feature to detect
Preferred Core support [1] was found to be non-trivial to implement
since BSP alone cannot detect if Preferred Core is supported and by the
time AP comes up, alternatives are patched and setting a X86_FEATURE_*
then is not possible.
Since x86 processors enabling ITMT support that consists multiple
non-NUMA MC groups within a PKG requires SD_ASYM_PACKING flag set at the
PKG domain, return x86_sched_itmt_flags unconditionally for the PKG
domain.
Since x86_die_flags() would have just returned x86_sched_itmt_flags()
after the change, remove the unnecessary wrapper and pass
x86_sched_itmt_flags() directly as the flags function.
Fixes: f3a0523918 ("cpufreq: amd-pstate: Enable amd-pstate preferred core support")
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com>
Link: https://lore.kernel.org/r/20241223043407.1611-6-kprateek.nayak@amd.com
x86_*_flags() wrappers were introduced with commit d3d37d850d
("x86/sched: Add SD_ASYM_PACKING flags to x86 ITMT CPU") to add
x86_sched_itmt_flags() in addition to the default domain flags for SMT
and MC domain.
commit 995998ebde ("x86/sched: Remove SD_ASYM_PACKING from the
SMT domain flags") removed the ITMT flags for SMT domain but not the
x86_smt_flags() wrappers which directly returns cpu_smt_flags().
Remove x86_smt_flags() and directly use cpu_smt_flags() to derive the
flags for SMT domain. No functional changes intended.
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com>
Link: https://lore.kernel.org/r/20241223043407.1611-5-kprateek.nayak@amd.com
"sched_itmt_enabled" was only introduced as a debug toggle for any funky
ITMT behavior. Move the sysctl controlled from
"/proc/sys/kernel/sched_itmt_enabled" to debugfs at
"/sys/kernel/debug/x86/sched_itmt_enabled" with a notable change that a
cat on the file will return "Y" or "N" instead of "1" or "0" to
indicate that feature is enabled or disabled respectively. Either "0" or
"N" (or any string that kstrtobool() interprets as false) can be written
to the file will disable the feature, and writing either "1" or "Y" (or
any string that kstrtobool() interprets as true) will enable it back
when the platform supports ITMT ranking.
Since ITMT is x86 specific (and PowerPC uses SD_ASYM_PACKING too), the
toggle was moved to "/sys/kernel/debug/x86/" as opposed to
"/sys/kernel/debug/sched/"
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com>
Link: https://lore.kernel.org/r/20241223043407.1611-4-kprateek.nayak@amd.com
Use guard() for itmt_update_mutex which avoids the extra mutex_unlock()
in the bailout and return paths.
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com>
Link: https://lore.kernel.org/r/20241223043407.1611-3-kprateek.nayak@amd.com
In preparation to move "sysctl_sched_itmt_enabled" to debugfs, convert
the unsigned int to bool since debugfs readily exposes boolean fops
primitives (debugfs_read_file_bool, debugfs_write_file_bool) which can
streamline the conversion.
Since the current ctl_table initializes extra1 and extra2 to SYSCTL_ZERO
and SYSCTL_ONE respectively, the value of "sysctl_sched_itmt_enabled"
can only be 0 or 1 and this datatype conversion should not cause any
functional changes.
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com>
Link: https://lore.kernel.org/r/20241223043407.1611-2-kprateek.nayak@amd.com
The whole module_writable_address() nonsense made a giant mess of
alternative.c, not to mention it still contains bugs -- notable some of the
CFI variants crash and burn.
Mike has been working on patches to clean all this up again, but given the
current state of things, this stuff just isn't ready.
Disable for now, lets try again next cycle.
Fixes: 5185e7f9f3 ("x86/module: enable ROX caches for module text on 64 bit")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20250113112934.GA8385@noisy.programming.kicks-ass.net
Since task->comm is guaranteed to be NUL-terminated, we can print it
directly without the need to copy it into a separate buffer. This
simplifies the code and avoids unnecessary operations.
Link: https://lkml.kernel.org/r/20241219023452.69907-3-laoar.shao@gmail.com
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "André Almeida" <andrealmeid@igalia.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Danilo Krummrich <dakr@redhat.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: David Airlie <airlied@gmail.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: James Morris <jmorris@namei.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Oded Gabbay <ogabbay@kernel.org>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Tvrtko Ursulin <tursulin@ursulin.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The recently introduced ROX cache for modules is assuming large page
support in 64-bit mode without testing the related feature bit. This
results in breakage when running as a Xen PV guest, as in this mode large
pages are not supported.
Fix that by testing the X86_FEATURE_PSE capability when deciding whether
to enable the ROX cache.
Link: https://lkml.kernel.org/r/20250103065631.26459-1-jgross@suse.com
Fixes: 2e45474ab1 ("execmem: add support for cache of large ROX pages")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The same CXL PMONs support is also avaiable on GNR. Apply
spr_uncore_cxlcm and spr_uncore_cxldp to GNR as well.
The other units were broken on early HW samples, so they were ignored in
the early enabling patch. The issue has been fixed and verified on the
later production HW. Add UPI, B2UPI, B2HOT, PCIEX16 and PCIEX8 for GNR.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Eric Hu <eric.hu@intel.com>
Link: https://lkml.kernel.org/r/20250108143017.1793781-2-kan.liang@linux.intel.com
The below warning may be triggered on GNR when the PCIE uncore units are
exposed.
WARNING: CPU: 4 PID: 1 at arch/x86/events/intel/uncore.c:1169 uncore_pci_pmu_register+0x158/0x190
The current uncore driver assumes that all the devices in the same PMU
have the exact same devfn. It's true for the previous platforms. But it
doesn't work for the new PCIE uncore units on GNR.
The assumption doesn't make sense. There is no reason to limit the
devices from the same PMU to the same devfn. Also, the current code just
throws the warning, but still registers the device. The WARN_ON_ONCE()
should be removed.
The func_id is used by the later event_init() to check if a event->pmu
has valid devices. For cpu and mmio uncore PMUs, they are always valid.
For pci uncore PMUs, it's set when the PMU is registered. It can be
replaced by the pmu->registered. Clean up the func_id.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Eric Hu <eric.hu@intel.com>
Link: https://lkml.kernel.org/r/20250108143017.1793781-1-kan.liang@linux.intel.com
Current code allocates the hv_vp_assist_page array with size
num_possible_cpus(). This code assumes cpu_possible_mask is dense,
which is not true in the general case per [1]. If cpu_possible_mask
is sparse, the array might be indexed by a value beyond the size of
the array.
However, the configurations that Hyper-V provides to guest VMs on x86
hardware, in combination with how x86 code assigns Linux CPU numbers,
*does* always produce a dense cpu_possible_mask. So the dense assumption
is not currently causing failures. But for robustness against future
changes in how cpu_possible_mask is populated, update the code to no
longer assume dense.
The correct approach is to allocate the array with size "nr_cpu_ids".
While this leaves unused array entries corresponding to holes in
cpu_possible_mask, the holes are assumed to be minimal and hence the
amount of memory wasted by unused entries is minimal.
[1] https://lore.kernel.org/lkml/SN6PR02MB4157210CC36B2593F8572E5ED4692@SN6PR02MB4157.namprd02.prod.outlook.com/
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241003035333.49261-2-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20241003035333.49261-2-mhklinux@outlook.com>
Remove all hyperv-tlfs.h files. These are no longer included
anywhere. hyperv/hvhdk.h serves the same role, but with an easier
path for adding new definitions.
Remove the relevant lines in MAINTAINERS.
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Link: https://lore.kernel.org/r/1732577084-2122-6-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1732577084-2122-6-git-send-email-nunodasneves@linux.microsoft.com>
Switch to using hvhdk.h everywhere in the kernel. This header
includes all the new Hyper-V headers in include/hyperv, which form a
superset of the definitions found in hyperv-tlfs.h.
This makes it easier to add new Hyper-V interfaces without being
restricted to those in the TLFS doc (reflected in hyperv-tlfs.h).
To be more consistent with the original Hyper-V code, the names of
some definitions are changed slightly. Update those where needed.
Update comments in mshyperv.h files to point to include/hyperv for
adding new definitions.
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Link: https://lore.kernel.org/r/1732577084-2122-5-git-send-email-nunodasneves@linux.microsoft.com
Link: https://lore.kernel.org/r/20250108222138.1623703-3-romank@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Now that all the required plumbing is done for enabling Secure TSC, add it to
the SNP features present list.
Signed-off-by: Nikunj A Dadhania <nikunj@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Tested-by: Peter Gonda <pgonda@google.com>
Link: https://lore.kernel.org/r/20250106124633.1418972-14-nikunj@amd.com
Intel's PRM specifies that the CPU writes to the PML log 'backwards'
or in other words, it first writes entry 511, then entry 510 and so on.
I also confirmed on the bare metal that the CPU indeed writes the entries
in this order.
KVM on the other hand, reads the entries in the opposite order, from the
last written entry and towards entry 511 and dumps them in this order to
the dirty ring.
Usually this doesn't matter, except for one complex nesting case:
KVM reties the instructions that cause MMU faults.
This might cause an emulated PML log entry to be visible to L1's hypervisor
before the actual memory write was committed.
This happens when the L0 MMU fault is followed directly by the VM exit to
L1, for example due to a pending L1 interrupt or due to the L1's
'PML log full' event.
This problem doesn't have a noticeable real-world impact because this
write retry is not much different from the guest writing to the same page
multiple times, which is also not reflected in the dirty log. The users of
the dirty logging only rely on correct reporting of the clean pages, or
in other words they assume that if a page is clean, then no writes were
committed to it since the moment it was marked clean.
However KVM has a kvm_dirty_log_test selftest, a test that tests both
the clean and the dirty pages vs the memory contents, and can fail if it
detects a dirty page which has an old value at the offset 0 which the test
writes.
To avoid failure, the test has a workaround for this specific problem:
The test skips checking memory that belongs to the last dirty ring entry,
which it has seen, relying on the fact that as long as memory writes are
committed in-order, only the last entry can belong to a not yet committed
memory write.
However, since L1's KVM is reading the PML log in the opposite direction
that L0 wrote it, the last dirty ring entry often will be not the last
entry written by the L0.
To fix this, switch the order in which KVM reads the PML log.
Note that this issue is not present on the bare metal, because on the
bare metal, an update of the A/D bits of a present entry, PML logging and
the actual memory write are all done by the CPU without any hypervisor
intervention and pending interrupt evaluation, thus once a PML log and/or
vCPU kick happens, all memory writes that are in the PML log are
committed to memory.
The only exception to this rule is when the guest hits a not present EPT
entry, in which case KVM first reads (backward) the PML log, dumps it to
the dirty ring, and *then* sets up a SPTE entry with A/D bits set, and logs
this to the dirty ring, thus making the entry be the last one in the
dirty ring.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20241219221034.903927-3-mlevitsk@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Rename PML_ENTITY_NUM to PML_LOG_NR_ENTRIES
Add PML_HEAD_INDEX to specify the first entry that CPU writes.
No functional change intended.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20241219221034.903927-2-mlevitsk@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Fix a goof in handle_vmx_instruction()'s comment where it references the
non-existent nested_vmx_setup(); the function that overwrites the exit
handlers is nested_vmx_hardware_setup().
Note, this isn't a case of a stale comment, e.g. due to the function being
renamed. The comment has always been wrong.
Fixes: e4027cfafd ("KVM: nVMX: Set callbacks for nested functions during hardware setup")
Signed-off-by: Gao Shiyuan <gaoshiyuan@baidu.com>
Link: https://lore.kernel.org/r/20250103153814.73903-1-gaoshiyuan@baidu.com
[sean: massage changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tag vmx_exit() with __exit now that it's no longer used by vmx_init().
Commit a7b9020b06 ("x86/l1tf: Handle EPT disabled state proper") dropped
the "__exit" attribute from vmx_exit() because vmx_init() was changed to
call vmx_exit().
However, commit e32b120071 ("KVM: VMX: Do _all_ initialization before
exposing /dev/kvm to userspace") changed vmx_init() to call __vmx_exit()
instead of the "full" vmx_exit(). This made it possible to mark vmx_exit()
as "__exit" again, as it originally was, and enjoy the benefits that it
provides (the function can be discarded from memory in situations where it
cannot be called, like the module being built-in or module unloading being
disabled in the kernel).
Signed-off-by: Costas Argyris <costas.argyris@amd.com>
Link: https://lore.kernel.org/r/20250102154050.2403-1-costas.argyris@amd.com
[sean: massage changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use the raw wrpkru() helper when loading the guest/host's PKRU on switch
to/from guest context, as the write_pkru() wrapper incurs an unnecessary
rdpkru(). In both paths, KVM is guaranteed to have performed RDPKRU since
the last possible write, i.e. KVM has a fresh cache of the current value
in hardware.
This effectively restores KVM's behavior to that of KVM prior to commit
c806e88734 ("x86/pkeys: Provide *pkru() helpers"), which renamed the raw
helper from __write_pkru() => wrpkru(), and turned __write_pkru() into a
wrapper. Commit 577ff465f5 ("x86/fpu: Only write PKRU if it is different
from current") then added the extra RDPKRU to avoid an unnecessary WRPKRU,
but completely missed that KVM already optimized away pointless writes.
Reported-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: 577ff465f5 ("x86/fpu: Only write PKRU if it is different from current")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20241221011647.3747448-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use LVT_TIMER instead of the literal '0' to clean up the apic_lvt_mask
lookup when emulating handling writes to APIC_LVTT.
No functional change intended.
Signed-off-by: Liam Ni <zhiguangni01@gmail.com>
[sean: manually regenerate patch (whitespace damaged), massage changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use the GUEST_TSC_FREQ MSR to discover the TSC frequency instead of
relying on kvm-clock based frequency calibration. Override both CPU and
TSC frequency calibration callbacks with securetsc_get_tsc_khz(). Since
the difference between CPU base and TSC frequency does not apply in this
case, the same callback is being used.
[ bp: Carve out from
https://lore.kernel.org/r/20250106124633.1418972-11-nikunj@amd.com ]
Signed-off-by: Nikunj A Dadhania <nikunj@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20250106124633.1418972-11-nikunj@amd.com
kthread_create() creates a kthread without running it yet. kthread_run()
creates a kthread and runs it.
On the other hand, kthread_create_worker() creates a kthread worker and
runs it.
This difference in behaviours is confusing. Also there is no way to
create a kthread worker and affine it using kthread_bind_mask() or
kthread_affine_preferred() before starting it.
Consolidate the behaviours and introduce kthread_run_worker[_on_cpu]()
that behaves just like kthread_run(). kthread_create_worker[_on_cpu]()
will now only create a kthread worker without starting it.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
There are more than one SMN index/data pair available for software use.
The register offsets are different, but the protocol is the same.
Use defines for the SMN offset values and allow the index/data offsets
to be passed to the read/write helper function.
This eases code reuse with other SMN users in the kernel.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20241206161210.163701-14-yazen.ghannam@amd.com
Use guard(mutex) and convert PCI error codes to common ones.
Suggested-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20241206161210.163701-12-yazen.ghannam@amd.com
SMN access was bolted into amd_nb mostly as convenience. This has
limitations though that require incurring tech debt to keep it working.
Move SMN access to the newly introduced AMD Node driver.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> # pdx86
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> # PMF, PMC
Link: https://lore.kernel.org/r/20241206161210.163701-11-yazen.ghannam@amd.com
amd_pci_dev_to_node_id() tries to find the AMD node ID of a device by
searching and counting devices.
The AMD node ID of an AMD node device is simply its slot number minus
the AMD node 0 slot number.
Simplify this function and move it to k10temp.c.
[ Yazen: Update commit message and simplify function. ]
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Co-developed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241206161210.163701-10-yazen.ghannam@amd.com
Currently, the total AMD node count is determined by searching and counting
CPU/node devices using PCI IDs.
However, AMD node information is already available through topology
CPUID/MSRs. The recent topology rework has made this info easier to access.
Replace the node counting code with a simple product of topology info.
Every node/northbridge is expected to have a 'misc' device. Clear everything
out if a 'misc' device isn't found on a node.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20250107222847.3300430-7-yazen.ghannam@amd.com
The "root" device search was introduced to support SMN access for Zen
systems. This device represents a PCIe root complex. It is not the
same as the "CPU/node" devices found at slots 0x18-0x1F.
There may be multiple PCIe root complexes within an AMD node. Such is
the case with server or High-end Desktop (HEDT) systems, etc. Therefore
it is not enough to assume "root <-> AMD node" is a 1-to-1 association.
Currently, this is handled by skipping "extra" root complexes during the
search. However, the hardware provides the PCI bus number of an AMD
node's root device.
Use the hardware info to get the root device's bus and drop the extra
search code and PCI IDs.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20241206161210.163701-7-yazen.ghannam@amd.com
Use the newly added helper function to look up a CPU/Node function to
find "function 4" devices.
Thus, avoid the need to regularly add new PCI IDs for basic discovery.
The unique PCI IDs are still useful in case of quirks or functional
changes. And they should be used only in such a manner.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20241206161210.163701-6-yazen.ghannam@amd.com
The "AMD Node" concept spans many families of systems and applies to
a number of subsystems and drivers.
Currently, the AMD Northbridge code is overloaded with AMD node
functionality. However, the node concept is broader than just
northbridges.
Start files to host common AMD node functions and definitions. Include
a helper to find an AMD node device function based on the convention
described in AMD documentation.
Anything that needs node functionality should include this rather than
amd_nb.h. The AMD_NB code will be reduced to only northbridge-specific
code needed for legacy systems.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20241206161210.163701-5-yazen.ghannam@amd.com
The check for early_is_amd_nb() is only useful for systems with GART or
the NB_CFG register.
Zen-based systems (both AMD and Hygon) have neither, so return early for
them.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20241206161210.163701-4-yazen.ghannam@amd.com
The code implicitly operates on AMD-based systems by matching on PCI
IDs. However, the use of these IDs is going away.
Add an explicit CPU vendor check instead of relying on PCI IDs.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20241206161210.163701-3-yazen.ghannam@amd.com
Remove includes of linux/hyperv.h, mshyperv.h, and hyperv-tlfs.h where
they are not used.
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Acked-by: Wei Liu <wei.liu@kernel.org>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Link: https://lore.kernel.org/r/1732577084-2122-3-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1732577084-2122-3-git-send-email-nunodasneves@linux.microsoft.com>
The x86 shadow stack support has its own set of registers. Those registers
are XSAVE-managed, but they are "supervisor state components" which means
that userspace can not touch them with XSAVE/XRSTOR. It also means that
they are not accessible from the existing ptrace ABI for XSAVE state.
Thus, there is a new ptrace get/set interface for it.
The regset code that ptrace uses provides an ->active() handler in
addition to the get/set ones. For shadow stack this ->active() handler
verifies that shadow stack is enabled via the ARCH_SHSTK_SHSTK bit in the
thread struct. The ->active() handler is checked from some call sites of
the regset get/set handlers, but not the ptrace ones. This was not
understood when shadow stack support was put in place.
As a result, both the set/get handlers can be called with
XFEATURE_CET_USER in its init state, which would cause get_xsave_addr() to
return NULL and trigger a WARN_ON(). The ssp_set() handler luckily has an
ssp_active() check to avoid surprising the kernel with shadow stack
behavior when the kernel is not ready for it (ARCH_SHSTK_SHSTK==0). That
check just happened to avoid the warning.
But the ->get() side wasn't so lucky. It can be called with shadow stacks
disabled, triggering the warning in practice, as reported by Christina
Schimpe:
WARNING: CPU: 5 PID: 1773 at arch/x86/kernel/fpu/regset.c:198 ssp_get+0x89/0xa0
[...]
Call Trace:
<TASK>
? show_regs+0x6e/0x80
? ssp_get+0x89/0xa0
? __warn+0x91/0x150
? ssp_get+0x89/0xa0
? report_bug+0x19d/0x1b0
? handle_bug+0x46/0x80
? exc_invalid_op+0x1d/0x80
? asm_exc_invalid_op+0x1f/0x30
? __pfx_ssp_get+0x10/0x10
? ssp_get+0x89/0xa0
? ssp_get+0x52/0xa0
__regset_get+0xad/0xf0
copy_regset_to_user+0x52/0xc0
ptrace_regset+0x119/0x140
ptrace_request+0x13c/0x850
? wait_task_inactive+0x142/0x1d0
? do_syscall_64+0x6d/0x90
arch_ptrace+0x102/0x300
[...]
Ensure that shadow stacks are active in a thread before looking them up
in the XSAVE buffer. Since ARCH_SHSTK_SHSTK and user_ssp[SHSTK_EN] are
set at the same time, the active check ensures that there will be
something to find in the XSAVE buffer.
[ dhansen: changelog/subject tweaks ]
Fixes: 2fab02b25a ("x86: Add PTRACE interface for shadow stack")
Reported-by: Christina Schimpe <christina.schimpe@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Tested-by: Christina Schimpe <christina.schimpe@intel.com>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250107233056.235536-1-rick.p.edgecombe%40intel.com
In SNP guest environment with Secure TSC enabled, unlike other clock sources
(such as HPET, ACPI timer, APIC, etc), the RDTSC instruction is handled
without causing a VM exit, resulting in minimal overhead and jitters. Even
when the host CPU's TSC is tampered with, the Secure TSC enabled guest keeps
on ticking forward. Hence, mark Secure TSC as the only reliable clock source,
bypassing unstable calibration.
[ bp: Massage. ]
Signed-off-by: Nikunj A Dadhania <nikunj@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Tested-by: Peter Gonda <pgonda@google.com>
Link: https://lore.kernel.org/r/20250106124633.1418972-10-nikunj@amd.com
The hypervisor should not be intercepting RDTSC/RDTSCP when Secure TSC is
enabled. A #VC exception will be generated if the RDTSC/RDTSCP instructions
are being intercepted. If this should occur and Secure TSC is enabled,
guest execution should be terminated as the guest cannot rely on the TSC
value provided by the hypervisor.
Signed-off-by: Nikunj A Dadhania <nikunj@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Tested-by: Peter Gonda <pgonda@google.com>
Link: https://lore.kernel.org/r/20250106124633.1418972-9-nikunj@amd.com
The hypervisor should not be intercepting GUEST_TSC_FREQ MSR(0xcOO10134)
when Secure TSC is enabled. A #VC exception will be generated otherwise. If
this should occur and Secure TSC is enabled, terminate guest execution.
Signed-off-by: Nikunj A Dadhania <nikunj@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20250106124633.1418972-8-nikunj@amd.com
Secure TSC enabled guests should not write to the MSR_IA32_TSC (0x10) register
as the subsequent TSC value reads are undefined. On AMD, MSR_IA32_TSC is
intercepted by the hypervisor by default. MSR_IA32_TSC read/write accesses
should not exit to the hypervisor for such guests.
Accesses to MSR_IA32_TSC need special handling in the #VC handler for the
guests with Secure TSC enabled. Writes to MSR_IA32_TSC should be ignored and
flagged once with a warning, and reads of MSR_IA32_TSC should return the
result of the RDTSC instruction.
[ bp: Massage commit message. ]
Suggested-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Nikunj A Dadhania <nikunj@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20250106124633.1418972-7-nikunj@amd.com
Add support for Secure TSC in SNP-enabled guests. Secure TSC allows guests
to securely use RDTSC/RDTSCP instructions, ensuring that the parameters used
cannot be altered by the hypervisor once the guest is launched.
Secure TSC-enabled guests need to query TSC information from the AMD Security
Processor. This communication channel is encrypted between the AMD Security
Processor and the guest, with the hypervisor acting merely as a conduit to
deliver the guest messages to the AMD Security Processor. Each message is
protected with AEAD (AES-256 GCM).
[ bp: Zap a stray newline over amd_cc_platform_has() while at it,
simplify CC_ATTR_GUEST_SNP_SECURE_TSC check ]
Signed-off-by: Nikunj A Dadhania <nikunj@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20250106124633.1418972-6-nikunj@amd.com
Commit
09d35045cd ("x86/sev: Avoid WARN()s and panic()s in early boot code")
replaced a panic() that could potentially hit before the kernel is even
mapped with a deadloop, to ensure that execution does not proceed when the
condition in question hits.
As Tom suggests, it is better to terminate and return to the hypervisor
in this case, using a newly invented failure code to describe the
failure condition.
Suggested-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/all/9ce88603-20ca-e644-2d8a-aeeaf79cde69@amd.com
At present, the SEV guest driver exclusively handles SNP guest messaging. All
routines for sending guest messages are embedded within it.
To support Secure TSC, SEV-SNP guests must communicate with the AMD Security
Processor during early boot. However, these guest messaging functions are not
accessible during early boot since they are currently part of the guest
driver.
Hence, relocate the core SNP guest messaging functions to SEV common code and
provide an API for sending SNP guest messages.
No functional change, but just an export symbol added for
snp_send_guest_request() and dropped the export symbol on
snp_issue_guest_request() and made it static.
Signed-off-by: Nikunj A Dadhania <nikunj@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20250106124633.1418972-5-nikunj@amd.com
Currently, the sev-guest driver is the only user of SNP guest messaging. All
routines for initializing SNP guest messaging are implemented within the
sev-guest driver and are not available during early boot.
In preparation for adding Secure TSC guest support, carve out APIs to allocate
and initialize the guest messaging descriptor context and make it part of
coco/sev/core.c. As there is no user of sev_guest_platform_data anymore,
remove the structure.
Signed-off-by: Nikunj A Dadhania <nikunj@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20250106124633.1418972-4-nikunj@amd.com
Legacy AMD systems include an integrated Northbridge that is represented
by MCA bank 4. This is the only non-core MCA bank in legacy systems. The
Northbridge is physically shared by all the CPUs within an AMD "Node".
However, in practice the "shared" MCA bank can only by managed by a
single CPU within that AMD Node. This is known as the "Node Base Core"
(NBC). For example, only the NBC will be able to read the MCA bank 4
registers; they will be Read-as-Zero for other CPUs. Also, the MCA
Thresholding interrupt will only signal the NBC; the other CPUs will not
receive it. This is enforced by hardware, and it should not be managed by
software.
The current AMD Thresholding code attempts to deal with the "shared" MCA
bank by micromanaging the bank's sysfs kobjects. However, this does not
follow the intended kobject use cases. It is also fragile, and it has
caused bugs in the past.
Modern AMD systems do not need this shared MCA bank support, and it
should not be needed on legacy systems either.
Remove the shared threshold bank code. Also, move the threshold struct
definitions to mce/amd.c, since they are no longer needed in amd_nb.c.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20241206161210.163701-2-yazen.ghannam@amd.com
__static_call_update_early() has a check for early_boot_irqs_disabled, but
is used before early_boot_irqs_disabled is set up in start_kernel().
Xen PV has always special cased early_boot_irqs_disabled, but Xen PVH does
not and falls over the BUG when booting as dom0.
It is very suspect that early_boot_irqs_disabled starts as 0, becomes 1 for
a time, then becomes 0 again, but as this needs backporting to fix a
breakage in a security fix, dropping the BUG_ON() is the far safer option.
Fixes: 0ef8047b73 ("x86/static-call: provide a way to do very early static-call updates")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219620
Reported-by: Alex Zenla <alex@edera.dev>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Alex Zenla <alex@edera.dev>
Link: https://lore.kernel.org/r/20241221211046.6475-1-andrew.cooper3@citrix.com
Clang 14 and older may emit UBSAN instrumentation into code that is
inlined into functions marked with __no_sanitize_undefined¹. This may
result in faults when the code is executed very early, which may be the
case for functions annotated as __head. Now that this requirement is
strictly enforced, the build will fail in this case with the following
message
Absolute reference to symbol '.data' not permitted in .head.text
Work around this by disabling UBSAN instrumentation on all SEV core
code.
¹ https://lore.kernel.org/r/20250101024348.GA1828419@ax162
[ bp: Add a footnote with Nathan's detailed explanation and a Fixes
tag ]
Fixes: 3b6f99a94b ("x86/boot: Disable UBSAN in early boot code")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20250101115119.114584-2-ardb@kernel.org
The result of that function is in essence boolean, so simplify to return the
result of the relevant expression. It also makes it follow the convention used
by __verify_patch_section().
No functional changes.
Signed-off-by: Nikolay Borisov <nik.borisov@suse.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20241018155151.702350-3-nik.borisov@suse.com
Instead of open-coding the check for size/data move it inside the
function and make it return a boolean indicating whether data was found
or not.
No functional changes.
[ bp: Write @ret in find_blobs_in_containers() only on success. ]
Signed-off-by: Nikolay Borisov <nik.borisov@suse.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20241018155151.702350-2-nik.borisov@suse.com
Convert family/model mixed checks to VFM-based checks to make the code
more compact. Simplify.
[ bp: Drop the "what" from the commit message - it should be visible from
the diff alone. ]
Suggested-by: Sohil Mehta <sohil.mehta@intel.com>
Suggested-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Link: https://lore.kernel.org/r/20241212140103.66964-6-qiuxu.zhuo@intel.com
Make those functions whose callers only care about success or failure return
a boolean value for better readability. Also, update the call sites
accordingly as the polarities of all the return values have been flipped.
No functional changes.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Link: https://lore.kernel.org/r/20241212140103.66964-4-qiuxu.zhuo@intel.com
The 'storm' variable points to this_cpu_ptr(&storm_desc). Access the
'stormy_bank_count' field through the 'storm' to avoid calling
this_cpu_*() on the same per-CPU variable twice.
This minor optimization reduces the text size by 16 bytes.
$ size threshold.o.*
text data bss dec hex filename
1395 1664 0 3059 bf3 threshold.o.old
1379 1664 0 3043 be3 threshold.o.new
No functional changes intended.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Link: https://lore.kernel.org/r/20241212140103.66964-3-qiuxu.zhuo@intel.com
Make several functions that return 0 or 1 return a boolean value for
better readability.
No functional changes are intended.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Link: https://lore.kernel.org/r/20241212140103.66964-2-qiuxu.zhuo@intel.com
0x8000001f.EAX is an AMD-specific leaf so there's no need to have "AMD"
in almost every feature's comment. Zap it and make the text more
readable this way.
No functional changes.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20241122210707.12742-1-bp@kernel.org
SRSO_USER_KERNEL_NO denotes whether the CPU is affected by SRSO across
user/kernel boundaries. Advertise it to guest userspace.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Link: https://lore.kernel.org/r/20241202120416.6054-3-bp@kernel.org
If the machine has:
CPUID Fn8000_0021_EAX[30] (SRSO_USER_KERNEL_NO) -- If this bit is 1,
it indicates the CPU is not subject to the SRSO vulnerability across
user/kernel boundaries.
have it fall back to IBPB on VMEXIT only, in the case it is going to run
VMs:
Speculative Return Stack Overflow: Mitigation: IBPB on VMEXIT only
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Link: https://lore.kernel.org/r/20241202120416.6054-2-bp@kernel.org
- Fix a hang in the "kernel IBT no ENDBR" self-test that may trigger
on FRED systems, caused by incomplete FRED state cleanup in the
#CP fault handler.
- Improve TDX (Coco VM) guest unrecoverable error handling to not
potentially leak decrypted memory.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=9Vad
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2024-12-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
- Fix a hang in the "kernel IBT no ENDBR" self-test that may trigger
on FRED systems, caused by incomplete FRED state cleanup in the
#CP fault handler
- Improve TDX (Coco VM) guest unrecoverable error handling to not
potentially leak decrypted memory
* tag 'x86-urgent-2024-12-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
virt: tdx-guest: Just leak decrypted memory on unrecoverable errors
x86/fred: Clear WFE in missing-ENDBRANCH #CPs
- Fix Intel Lunar Lake build-in event definitions
- Fall back to (compatible) legacy features on new Intel PEBS
format v6 hardware
- Enable uncore support on Intel Clearwater Forest CPUs, which is the same
as the existing Sierra Forest uncore driver.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmdxD+ARHG1pbmdvQGtl
cm5lbC5vcmcACgkQEnMQ0APhK1hYKQ//bFPzPsWKeObYGEE1Pak80Evkw9jkcbiz
89ALflvJXG2neCGScUxVbgfh6a8hw/+FEjkVtKBcsrQRiFDn8LzF0oD5OzJhbbAA
oyhe3JYiIswaAFvmRt+R0Xte7i9UHHF9+LM69DajvhuA4ISGGEfbEOhgAUdp2PZu
1w8S1Tmk960jXeCHTMDncKqEIwwr+tandKPmQuAMmlDC04yGkVLMEF6kxzwLX6Q8
09TLWoABoGmn32iTGHn0JQ/zW9HCFeCOzwRsYhHQKEpUYgJUl3Tienc+1gfyABM9
0osYyQrBXU49HwcRhAbx0ajkQ95S9Xt7JuTWcV89OyWg7+g2UxeIletER7oNrV6g
YvQc+G3axrsQLySondK9Zj0QPdX3cGniHXLE7VAm5Y761rypLcvbGrZWMvgfuLO8
uFAb+7YyxX87hqjCqY7l8ICBtrMrUw6BX/G1oOhERKzvlzoU7rBtq9him2P7TgBz
++sfullezocqhD2UnPrcJCxkHz2InE0LWLq5rOcM2xpo83OlcQaWzK/f4zsVobUJ
XRYgbRi95KkZPsLxpRA8w9aozWmvTe38bso8JM/ys5JPUHxRNqJsv40AzOaevgzG
Xpa5GBxjPeLfDVmAZ2RQD2jSnruZEWIRFIctFEP+HrWwrnFVrERKO9nFT6b0TjVy
AQu8jy/6rns=
=os4o
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-2024-12-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 perf fixes from Ingo Molnar:
- Fix Intel Lunar Lake build-in event definitions
- Fall back to (compatible) legacy features on new Intel PEBS format v6
hardware
- Enable uncore support on Intel Clearwater Forest CPUs, which is the
same as the existing Sierra Forest uncore driver
* tag 'perf-urgent-2024-12-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Fix bitmask of OCR and FRONTEND events for LNC
perf/x86/intel/ds: Add PEBS format 6
perf/x86/intel/uncore: Add Clearwater Forest support
An indirect branch instruction sets the CPU indirect branch tracker
(IBT) into WAIT_FOR_ENDBRANCH (WFE) state and WFE stays asserted
across the instruction boundary. When the decoder finds an
inappropriate instruction while WFE is set ENDBR, the CPU raises a #CP
fault.
For the "kernel IBT no ENDBR" selftest where #CPs are deliberately
triggered, the WFE state of the interrupted context needs to be
cleared to let execution continue. Otherwise when the CPU resumes
from the instruction that just caused the previous #CP, another
missing-ENDBRANCH #CP is raised and the CPU enters a dead loop.
This is not a problem with IDT because it doesn't preserve WFE and
IRET doesn't set WFE. But FRED provides space on the entry stack
(in an expanded CS area) to save and restore the WFE state, thus the
WFE state is no longer clobbered, so software must clear it.
Clear WFE to avoid dead looping in ibt_clear_fred_wfe() and the
!ibt_fatal code path when execution is allowed to continue.
Clobbering WFE in any other circumstance is a security-relevant bug.
[ dhansen: changelog rewording ]
Fixes: a5f6c2ace9 ("x86/shstk: Add user control-protection fault handler")
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20241113175934.3897541-1-xin%40zytor.com
This introduces ftrace_get_symaddr() which tries to convert fentry_ip
passed by ftrace or fgraph callback to symaddr without calling
kallsyms API. It returns the symbol address or 0 if it fails to
convert it.
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/173519011487.391279.5450806886342723151.stgit@devnote2
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202412061423.K79V55Hd-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202412061804.5VRzF14E-lkp@intel.com/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Fprobe store its data structure address and size on the fgraph return stack
by __fprobe_header. But most 64bit architecture can combine those to
one unsigned long value because 4 MSB in the kernel address are the same.
With this encoding, fprobe can consume less space on ret_stack.
This introduces asm/fprobe.h to define arch dependent encode/decode
macros. Note that since fprobe depends on CONFIG_HAVE_FUNCTION_GRAPH_FREGS,
currently only arm64, loongarch, riscv, s390 and x86 are supported.
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com> # s390
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: x86@kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/173519005783.391279.5307910947400277525.stgit@devnote2
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Rewrite fprobe implementation on function-graph tracer.
Major API changes are:
- 'nr_maxactive' field is deprecated.
- This depends on CONFIG_DYNAMIC_FTRACE_WITH_ARGS or
!CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS, and
CONFIG_HAVE_FUNCTION_GRAPH_FREGS. So currently works only
on x86_64.
- Currently the entry size is limited in 15 * sizeof(long).
- If there is too many fprobe exit handler set on the same
function, it will fail to probe.
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com> # s390
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Naveen N Rao <naveen@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: x86@kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/173519003970.391279.14406792285453830996.stgit@devnote2
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Add CONFIG_HAVE_FTRACE_GRAPH_FUNC kconfig in addition to ftrace_graph_func
macro check. This is for the other feature (e.g. FPROBE) which requires to
access ftrace_regs from fgraph_ops::entryfunc() can avoid compiling if
the fgraph can not pass the valid ftrace_regs.
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Naveen N Rao <naveen@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: x86@kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/173519001472.391279.1174901685282588467.stgit@devnote2
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Add ftrace_fill_perf_regs() which should be compatible with the
perf_fetch_caller_regs(). In other words, the pt_regs returned from the
ftrace_fill_perf_regs() must satisfy 'user_mode(regs) == false' and can be
used for stack tracing.
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com> # s390
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Naveen N Rao <naveen@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: x86@kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lore.kernel.org/173518997908.391279.15910334347345106424.stgit@devnote2
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Change the fprobe exit handler to use ftrace_regs structure instead of
pt_regs. This also introduce HAVE_FTRACE_REGS_HAVING_PT_REGS which
means the ftrace_regs is including the pt_regs so that ftrace_regs
can provide pt_regs without memory allocation.
Fprobe introduces a new dependency with that.
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com> # s390
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: bpf <bpf@vger.kernel.org>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: x86@kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Song Liu <song@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Matt Bobrowski <mattbobrowski@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Yonghong Song <yonghong.song@linux.dev>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Stanislav Fomichev <sdf@fomichev.me>
Cc: Hao Luo <haoluo@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/173518995092.391279.6765116450352977627.stgit@devnote2
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Pass ftrace_regs to the fgraph_ops::entryfunc(). If ftrace_regs is not
available, it passes a NULL instead. User callback function can access
some registers (including return address) via this ftrace_regs.
Note that the ftrace_regs can be NULL when the arch does NOT define:
HAVE_DYNAMIC_FTRACE_WITH_ARGS or HAVE_DYNAMIC_FTRACE_WITH_REGS.
More specifically, if HAVE_DYNAMIC_FTRACE_WITH_REGS is defined but
not the HAVE_DYNAMIC_FTRACE_WITH_ARGS, and the ftrace ops used to
register the function callback does not set FTRACE_OPS_FL_SAVE_REGS.
In this case, ftrace_regs can be NULL in user callback.
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Naveen N Rao <naveen@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: x86@kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/173518990044.391279.17406984900626078579.stgit@devnote2
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Get the ftrace recursion lock in the generic function_graph_enter()
instead of each architecture code.
This changes all function_graph tracer callbacks running in
non-preemptive state. On x86 and powerpc, this is by default, but
on the other architecutres, this will be new.
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Naveen N Rao <naveen@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: x86@kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/173379653720.973433.18438622234884980494.stgit@devnote2
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Add a few sanity checks to prevent memslot GFNs from ever having alias bits
set.
Like other Coco technologies, TDX has the concept of private and shared
memory. For TDX the private and shared mappings are managed on separate
EPT roots. The private half is managed indirectly though calls into a
protected runtime environment called the TDX module, where the shared half
is managed within KVM in normal page tables.
For TDX, the shared half will be mapped in the higher alias, with a "shared
bit" set in the GPA. However, KVM will still manage it with the same
memslots as the private half. This means memslot looks ups and zapping
operations will be provided with a GFN without the shared bit set.
If these memslot GFNs ever had the bit that selects between the two aliases
it could lead to unexpected behavior in the complicated code that directs
faulting or zapping operations between the roots that map the two aliases.
As a safety measure, prevent memslots from being set at a GFN range that
contains the alias bit.
Also, check in the kvm_faultin_pfn() for the fault path. This later check
does less today, as the alias bits are specifically stripped from the GFN
being checked, however future code could possibly call in to the fault
handler in a way that skips this stripping. Since kvm_faultin_pfn() now
has many references to vcpu->kvm, extract it to local variable.
Link: https://lore.kernel.org/kvm/ZpbKqG_ZhCWxl-Fc@google.com/
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Message-ID: <20240718211230.1492011-19-rick.p.edgecombe@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Don't zap valid mirror roots in kvm_tdp_mmu_zap_all(), which in effect
is only direct roots (invalid and valid).
For TDX, kvm_tdp_mmu_zap_all() is only called during MMU notifier
release. Since, mirrored EPT comes from guest mem, it will never be
mapped to userspace, and won't apply. But in addition to be unnecessary,
mirrored EPT is cleaned up in a special way during VM destruction.
Pass the KVM_INVALID_ROOTS bit into __for_each_tdp_mmu_root_yield_safe()
as well, to clean up invalid direct roots, as is the current behavior.
While at it, remove an obsolete reference to work item-based zapping.
Co-developed-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Message-ID: <20240718211230.1492011-18-rick.p.edgecombe@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename kvm_tdp_mmu_invalidate_all_roots() to
kvm_tdp_mmu_invalidate_roots(), and make it enum kvm_tdp_mmu_root_types
as an argument.
kvm_tdp_mmu_invalidate_roots() is called with different root types. For
kvm_mmu_zap_all_fast() it only operates on shared roots. But when tearing
down a VM it needs to invalidate all roots. Have the callers only
invalidate the required roots instead of all roots.
Within kvm_tdp_mmu_invalidate_roots(), respect the root type
passed by checking the root type in root iterator.
Suggested-by: Chao Gao <chao.gao@intel.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Message-ID: <20240718211230.1492011-17-rick.p.edgecombe@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Integrate hooks for mirroring page table operations for cases where TDX
will zap PTEs or free page tables.
Like other Coco technologies, TDX has the concept of private and shared
memory. For TDX the private and shared mappings are managed on separate
EPT roots. The private half is managed indirectly though calls into a
protected runtime environment called the TDX module, where the shared half
is managed within KVM in normal page tables.
Since calls into the TDX module are relatively slow, walking private page
tables by making calls into the TDX module would not be efficient. Because
of this, previous changes have taught the TDP MMU to keep a mirror root,
which is separate, unmapped TDP root that private operations can be
directed to. Currently this root is disconnected from the guest. Now add
plumbing to propagate changes to the "external" page tables being
mirrored. Just create the x86_ops for now, leave plumbing the operations
into the TDX module for future patches.
Add two operations for tearing down page tables, one for freeing page
tables (free_external_spt) and one for zapping PTEs (remove_external_spte).
Define them such that remove_external_spte will perform a TLB flush as
well. (in TDX terms "ensure there are no active translations").
TDX MMU support will exclude certain MMU operations, so only plug in the
mirroring x86 ops where they will be needed. For zapping/freeing, only
hook tdp_mmu_iter_set_spte() which is used for mapping and linking PTs.
Don't bother hooking tdp_mmu_set_spte_atomic() as it is only used for
zapping PTEs in operations unsupported by TDX: zapping collapsible PTEs and
kvm_mmu_zap_all_fast().
In previous changes to address races around concurrent populating using
tdp_mmu_set_spte_atomic(), a solution was introduced to temporarily set
FROZEN_SPTE in the mirrored page tables while performing the external
operations. Such a solution is not needed for the tear down paths in TDX
as these will always be performed with the mmu_lock held for write.
Sprinkle some KVM_BUG_ON()s to reflect this.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Co-developed-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Kai Huang <kai.huang@intel.com>
Co-developed-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Co-developed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Message-ID: <20240718211230.1492011-16-rick.p.edgecombe@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Integrate hooks for mirroring page table operations for cases where TDX
will set PTEs or link page tables.
Like other Coco technologies, TDX has the concept of private and shared
memory. For TDX the private and shared mappings are managed on separate
EPT roots. The private half is managed indirectly through calls into a
protected runtime environment called the TDX module, where the shared half
is managed within KVM in normal page tables.
Since calls into the TDX module are relatively slow, walking private page
tables by making calls into the TDX module would not be efficient. Because
of this, previous changes have taught the TDP MMU to keep a mirror root,
which is separate, unmapped TDP root that private operations can be
directed to. Currently this root is disconnected from any actual guest
mapping. Now add plumbing to propagate changes to the "external" page
tables being mirrored. Just create the x86_ops for now, leave plumbing the
operations into the TDX module for future patches.
Add two operations for setting up external page tables, one for linking
new page tables and one for setting leaf PTEs. Don't add any op for
configuring the root PFN, as TDX handles this itself. Don't provide a
way to set permissions on the PTEs also, as TDX doesn't support it.
This results in MMU "mirroring" support that is very targeted towards TDX.
Since it is likely there will be no other user, the main benefit of making
the support generic is to keep TDX specific *looking* code outside of the
MMU. As a generic feature it will make enough sense from TDX's
perspective. For developers unfamiliar with TDX arch it can express the
general concepts such that they can continue to work in the code.
TDX MMU support will exclude certain MMU operations, so only plug in the
mirroring x86 ops where they will be needed. For setting/linking, only
hook tdp_mmu_set_spte_atomic() which is used for mapping and linking
PTs. Don't bother hooking tdp_mmu_iter_set_spte() as it is only used for
setting PTEs in operations unsupported by TDX: splitting huge pages and
write protecting. Sprinkle KVM_BUG_ON()s to document as code that these
paths are not supported for mirrored page tables. For zapping operations,
leave those for near future changes.
Many operations in the TDP MMU depend on atomicity of the PTE update.
While the mirror PTE on KVM's side can be updated atomically, the update
that happens inside the external operations (S-EPT updates via TDX module
call) can't happen atomically with the mirror update. The following race
could result during two vCPU's populating private memory:
* vcpu 1: atomically update 2M level mirror EPT entry to be present
* vcpu 2: read 2M level EPT entry that is present
* vcpu 2: walk down into 4K level EPT
* vcpu 2: atomically update 4K level mirror EPT entry to be present
* vcpu 2: set_exterma;_spte() to update 4K secure EPT entry => error
because 2M secure EPT entry is not populated yet
* vcpu 1: link_external_spt() to update 2M secure EPT entry
Prevent this by setting the mirror PTE to FROZEN_SPTE while the reflect
operations are performed. Only write the actual mirror PTE value once the
reflect operations have completed. When trying to set a PTE to present and
encountering a frozen SPTE, retry the fault.
By doing this the race is prevented as follows:
* vcpu 1: atomically update 2M level EPT entry to be FROZEN_SPTE
* vcpu 2: read 2M level EPT entry that is FROZEN_SPTE
* vcpu 2: find that the EPT entry is frozen
abandon page table walk to resume guest execution
* vcpu 1: link_external_spt() to update 2M secure EPT entry
* vcpu 1: atomically update 2M level EPT entry to be present (unfreeze)
* vcpu 2: resume guest execution
Depending on vcpu 1 state, vcpu 2 may result in EPT violation
again or make progress on guest execution
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Co-developed-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Kai Huang <kai.huang@intel.com>
Co-developed-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Co-developed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Message-ID: <20240718211230.1492011-15-rick.p.edgecombe@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Teach the MMU notifier callbacks how to check kvm_gfn_range.process to
filter which KVM MMU root types to operate on.
The private GPAs are backed by guest memfd. Such memory is not subjected
to MMU notifier callbacks because it can't be mapped into the host user
address space. Now kvm_gfn_range conveys info about which root to operate
on. Enhance the callback to filter the root page table type.
The KVM MMU notifier comes down to two functions.
kvm_tdp_mmu_unmap_gfn_range() and __kvm_tdp_mmu_age_gfn_range():
- invalidate_range_start() calls kvm_tdp_mmu_unmap_gfn_range()
- invalidate_range_end() doesn't call into arch code
- the other callbacks call __kvm_tdp_mmu_age_gfn_range()
For VM's without a private/shared split in the EPT, all operations
should target the normal(direct) root.
With the switch from for_each_tdp_mmu_root() to
__for_each_tdp_mmu_root() in kvm_tdp_mmu_handle_gfn(), there are no
longer any users of for_each_tdp_mmu_root(). Remove it.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Message-ID: <20240718211230.1492011-14-rick.p.edgecombe@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add the ability for the TDP MMU to maintain a mirror of a separate
mapping.
Like other Coco technologies, TDX has the concept of private and shared
memory. For TDX the private and shared mappings are managed on separate
EPT roots. The private half is managed indirectly through calls into a
protected runtime environment called the TDX module, where the shared half
is managed within KVM in normal page tables.
In order to handle both shared and private memory, KVM needs to learn to
handle faults and other operations on the correct root for the operation.
KVM could learn the concept of private roots, and operate on them by
calling out to operations that call into the TDX module. But there are two
problems with that:
1. Calls into the TDX module are relatively slow compared to the simple
accesses required to read a PTE managed directly by KVM.
2. Other Coco technologies deal with private memory completely differently
and it will make the code confusing when being read from their
perspective. Special operations added for TDX that set private or zap
private memory will have nothing to do with these other private memory
technologies. (SEV, etc).
To handle these, instead teach the TDP MMU about a new concept "mirror
roots". Such roots maintain page tables that are not actually mapped,
and are just used to traverse quickly to determine if the mid level page
tables need to be installed. When the memory be mirrored needs to actually
be changed, calls can be made to via x86_ops.
private KVM page fault |
| |
V |
private GPA | CPU protected EPTP
| | |
V | V
mirror PT root | external PT root
| | |
V | V
mirror PT --hook to propagate-->external PT
| | |
\--------------------+------\ |
| | |
| V V
| private guest page
|
|
non-encrypted memory | encrypted memory
|
Leave calling out to actually update the private page tables that are being
mirrored for later changes. Just implement the handling of MMU operations
on to mirrored roots.
In order to direct operations to correct root, add root types
KVM_DIRECT_ROOTS and KVM_MIRROR_ROOTS. Tie the usage of mirrored/direct
roots to private/shared with conditionals. It could also be implemented by
making the kvm_tdp_mmu_root_types and kvm_gfn_range_filter enum bits line
up such that conversion could be a direct assignment with a case. Don't do
this because the mapping of private to mirrored is confusing enough. So it
is worth not hiding the logic in type casting.
Cleanup the mirror root in kvm_mmu_destroy() instead of the normal place
in kvm_mmu_free_roots(), because the private root that is being cannot be
rebuilt like a normal root. It needs to persist for the lifetime of the VM.
The TDX module will also need to be provided with page tables to use for
the actual mapping being mirrored by the mirrored page tables. Allocate
these in the mapping path using the recently added
kvm_mmu_alloc_external_spt().
Don't support 2M page for now. This is avoided by forcing 4k pages in the
fault. Add a KVM_BUG_ON() to verify.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Co-developed-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Kai Huang <kai.huang@intel.com>
Co-developed-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Co-developed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Message-ID: <20240718211230.1492011-13-rick.p.edgecombe@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Take the root as an argument of tdp_mmu_for_each_pte() instead of looking
it up in the mmu. With no other purpose of passing the mmu, drop it.
Future changes will want to change which root is used based on the context
of the MMU operation. So change the callers to pass in the root currently
used, mmu->root.hpa in a preparatory patch to make the later one smaller
and easier to review.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Message-ID: <20240718211230.1492011-12-rick.p.edgecombe@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Define an enum kvm_tdp_mmu_root_types to specify the KVM MMU root type [1]
so that the iterator on the root page table can consistently filter the
root page table type instead of only_valid.
TDX KVM will operate on KVM page tables with specified types. Shared page
table, private page table, or both. Introduce an enum instead of bool
only_valid so that we can easily enhance page table types applicable to
shared, private, or both in addition to valid or not. Replace
only_valid=false with KVM_ANY_ROOTS and only_valid=true with
KVM_ANY_VALID_ROOTS. Use KVM_ANY_ROOTS and KVM_ANY_VALID_ROOTS to wrap
KVM_VALID_ROOTS to avoid further code churn when direct vs mirror root
concepts are introduced in future patches.
Link: https://lore.kernel.org/kvm/ZivazWQw1oCU8VBC@google.com/ [1]
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Message-ID: <20240718211230.1492011-11-rick.p.edgecombe@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Extract tdp_mmu_root_match() to check if the root has given types and use
it for the root page table iterator. It checks only_invalid now.
TDX KVM operates on a shared page table only (Shared-EPT), a mirrored page
table only (Secure-EPT), or both based on the operation. KVM MMU notifier
operations only on shared page table. KVM guest_memfd invalidation
operations only on mirrored page table, and so on. Introduce a centralized
matching function instead of open coding matching logic in the iterator.
The next step is to extend the function to check whether the page is shared
or private
Link: https://lore.kernel.org/kvm/ZivazWQw1oCU8VBC@google.com/
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Message-ID: <20240718211230.1492011-10-rick.p.edgecombe@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Teach the MMU to map guest GFNs at a massaged position on the TDP, to aid
in implementing TDX shared memory.
Like other Coco technologies, TDX has the concept of private and shared
memory. For TDX the private and shared mappings are managed on separate
EPT roots. The private half is managed indirectly through calls into a
protected runtime environment called the TDX module, where the shared half
is managed within KVM in normal page tables.
For TDX, the shared half will be mapped in the higher alias, with a "shared
bit" set in the GPA. However, KVM will still manage it with the same
memslots as the private half. This means memslot looks ups and zapping
operations will be provided with a GFN without the shared bit set.
So KVM will either need to apply or strip the shared bit before mapping or
zapping the shared EPT. Having GFNs sometimes have the shared bit and
sometimes not would make the code confusing.
So instead arrange the code such that GFNs never have shared bit set.
Create a concept of "direct bits", that is stripped from the fault
address when setting fault->gfn, and applied within the TDP MMU iterator.
Calling code will behave as if it is operating on the PTE mapping the GFN
(without shared bits) but within the iterator, the actual mappings will be
shifted using bits specific for the root. SPs will have the GFN set
without the shared bit. In the end the TDP MMU will behave like it is
mapping things at the GFN without the shared bit but with a strange page
table format where everything is offset by the shared bit.
Since TDX only needs to shift the mapping like this for the shared bit,
which is mapped as the normal TDP root, add a "gfn_direct_bits" field to
the kvm_arch structure for each VM with a default value of 0. It will
have the bit set at the position of the GPA shared bit in GFN through TD
specific initialization code. Keep TDX specific concepts out of the MMU
code by not naming it "shared".
Ranged TLB flushes (i.e. flush_remote_tlbs_range()) target specific GFN
ranges. In convention established above, these would need to target the
shifted GFN range. It won't matter functionally, since the actual
implementation will always result in a full flush for the only planned
user (TDX). For correctness reasons, future changes can provide a TDX
x86_ops.flush_remote_tlbs_range implementation to return -EOPNOTSUPP and
force the full flush for TDs.
This leaves one problem. Some operations use a concept of max GFN (i.e.
kvm_mmu_max_gfn()), to iterate over the whole TDP range. When applying the
direct mask to the start of the range, the iterator would end up skipping
iterating over the range not covered by the direct mask bit. For safety,
make sure the __tdp_mmu_zap_root() operation iterates over the full GFN
range supported by the underlying TDP format. Add a new iterator helper,
for_each_tdp_pte_min_level_all(), that iterates the entire TDP GFN range,
regardless of root.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Co-developed-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Co-developed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Message-ID: <20240718211230.1492011-9-rick.p.edgecombe@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a struct kvm argument to the TDP MMU iterators.
Future changes will want to change how the iterator behaves based on a
member of struct kvm. Change the signature and callers of the iterator
loop helpers in a separate patch to make the future one easier to review.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Message-ID: <20240718211230.1492011-8-rick.p.edgecombe@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The kvm_tdp_mmu_alloc_root() function currently always returns 0. This
allows for the caller, mmu_alloc_direct_roots(), to call
kvm_tdp_mmu_alloc_root() and also return 0 in one line:
return kvm_tdp_mmu_alloc_root(vcpu);
So it is useful even though the return value of kvm_tdp_mmu_alloc_root()
is always the same. However, in future changes, kvm_tdp_mmu_alloc_root()
will be called twice in mmu_alloc_direct_roots(). This will force the
first call to either awkwardly handle the return value that will always
be zero or ignore it. So change kvm_tdp_mmu_alloc_root() to return void.
Do it in a separate change so the future change will be cleaner.
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240718211230.1492011-7-rick.p.edgecombe@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce a "is_mirror" member to the kvm_mmu_page_role union to identify
SPTEs associated with the mirrored EPT.
The TDX module maintains the private half of the EPT mapped in the TD in
its protected memory. KVM keeps a copy of the private GPAs in a mirrored
EPT tree within host memory. This "is_mirror" attribute enables vCPUs to
find and get the root page of mirrored EPT from the MMU root list for a
guest TD. This also allows KVM MMU code to detect changes in mirrored EPT
according to the "is_mirror" mmu page role and propagate the changes to
the private EPT managed by TDX module.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Message-ID: <20240718211230.1492011-6-rick.p.edgecombe@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add an external pointer to struct kvm_mmu_page for TDX's private page table
and add helper functions to allocate/initialize/free a private page table
page. TDX will only be supported with the TDP MMU. Because KVM TDP MMU
doesn't use unsync_children and write_flooding_count, pack them to have
room for a pointer and use a union to avoid memory overhead.
For private GPA, CPU refers to a private page table whose contents are
encrypted. The dedicated APIs to operate on it (e.g. updating/reading its
PTE entry) are used, and their cost is expensive.
When KVM resolves the KVM page fault, it walks the page tables. To reuse
the existing KVM MMU code and mitigate the heavy cost of directly walking
the private page table allocate two sets of page tables for the private
half of the GPA space.
For the page tables that KVM will walk, allocate them like normal and refer
to them as mirror page tables. Additionally allocate one more page for the
page tables the CPU will walk, and call them external page tables. Resolve
the KVM page fault with the existing code, and do additional operations
necessary for modifying the external page table in future patches.
The relationship of the types of page tables in this scheme is depicted
below:
KVM page fault |
| |
V |
-------------+---------- |
| | |
V V |
shared GPA private GPA |
| | |
V V |
shared PT root mirror PT root | private PT root
| | | |
V V | V
shared PT mirror PT --propagate--> external PT
| | | |
| \-----------------+------\ |
| | | |
V | V V
shared guest page | private guest page
|
non-encrypted memory | encrypted memory
|
PT - Page table
Shared PT - Visible to KVM, and the CPU uses it for shared mappings.
External PT - The CPU uses it, but it is invisible to KVM. TDX module
updates this table to map private guest pages.
Mirror PT - It is visible to KVM, but the CPU doesn't use it. KVM uses
it to propagate PT change to the actual private PT.
Add a helper kvm_has_mirrored_tdp() to trigger this behavior and wire it
to the TDX vm type.
Co-developed-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Message-ID: <20240718211230.1492011-5-rick.p.edgecombe@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a VM type define for TDX.
Future changes will need to lay the ground work for TDX support by
making some behavior conditional on the VM being a TDX guest.
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Message-ID: <20240718211230.1492011-4-rick.p.edgecombe@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add new members to strut kvm_gfn_range to indicate which mapping
(private-vs-shared) to operate on: enum kvm_gfn_range_filter
attr_filter. Update the core zapping operations to set them appropriately.
TDX utilizes two GPA aliases for the same memslots, one for memory that is
for private memory and one that is for shared. For private memory, KVM
cannot always perform the same operations it does on memory for default
VMs, such as zapping pages and having them be faulted back in, as this
requires guest coordination. However, some operations such as guest driven
conversion of memory between private and shared should zap private memory.
Internally to the MMU, private and shared mappings are tracked on separate
roots. Mapping and zapping operations will operate on the respective GFN
alias for each root (private or shared). So zapping operations will by
default zap both aliases. Add fields in struct kvm_gfn_range to allow
callers to specify which aliases so they can only target the aliases
appropriate for their specific operation.
There was feedback that target aliases should be specified such that the
default value (0) is to operate on both aliases. Several options were
considered. Several variations of having separate bools defined such
that the default behavior was to process both aliases. They either allowed
nonsensical configurations, or were confusing for the caller. A simple
enum was also explored and was close, but was hard to process in the
caller. Instead, use an enum with the default value (0) reserved as a
disallowed value. Catch ranges that didn't have the target aliases
specified by looking for that specific value.
Set target alias with enum appropriately for these MMU operations:
- For KVM's mmu notifier callbacks, zap shared pages only because private
pages won't have a userspace mapping
- For setting memory attributes, kvm_arch_pre_set_memory_attributes()
chooses the aliases based on the attribute.
- For guest_memfd invalidations, zap private only.
Link: https://lore.kernel.org/kvm/ZivIF9vjKcuGie3s@google.com/
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Co-developed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Message-ID: <20240718211230.1492011-3-rick.p.edgecombe@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Prepare for a future TDX patch which asserts that atomic zapping
(i.e. zapping with mmu_lock taken for read) don't operate on mirror roots.
When tearing down a VM, all roots have to be zapped (including mirror
roots once they're in place) so do that with the mmu_lock taken for write.
kvm_mmu_uninit_tdp_mmu() is invoked either before or after executing any
atomic operations on SPTEs by vCPU threads. Therefore, it will not impact
vCPU threads performance if kvm_tdp_mmu_zap_invalidated_roots() acquires
mmu_lock for write to zap invalid roots.
Co-developed-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Message-ID: <20240718211230.1492011-2-rick.p.edgecombe@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Disable AVIC on SNP-enabled systems that don't allow writes to the virtual
APIC page, as such hosts will hit unexpected RMP #PFs in the host when
running VMs of any flavor.
- Fix a WARN in the hypercall completion path due to KVM trying to determine
if a guest with protected register state is in 64-bit mode (KVM's ABI is to
assume such guests only make hypercalls in 64-bit mode).
- Allow the guest to write to supported bits in MSR_AMD64_DE_CFG to fix a
regression with Windows guests, and because KVM's read-only behavior appears
to be entirely made up.
- Treat TDP MMU faults as spurious if the faulting access is allowed given the
existing SPTE. This fixes a benign WARN (other than the WARN itself) due to
unexpectedly replacing a writable SPTE with a read-only SPTE.
- Emit a warning when KVM is configured with ignore_msrs=1 and also to hide the
MSRs that the guest is looking for from the kernel logs. ignore_msrs can
trick guests into assuming that certain processor features are present, and
this in turn leads to bogus bug reports.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmdoSTgUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroM+IggAndK6byvsGjU0lM5v4WhKMnD7KZXi
PsXuzv7LQUtbOaosowbBDUfMkZXwewmgUjBWmJL8WFlVePk7+8Aj29Zwd4vH3cHI
KZ/AeyC6VwH1CFLZMSoHgG2dCl8hUUkUldZLAdYKigTRMlw5FmnmIfhqx/mpxiMz
xHs9TU+NZpaQVXSzq9P1AXkJX+zZvyYlGXrTRtJ541AwYPWsq1MBr1megtBi59ws
zEgCOyBpDHWQEasbtwHjPNNH+rCi8SEq2QCrSGHpTXWLS9kXj32wLldWb6E3L5ta
c1/Q9mQDpVXQNidnAWyhukVmbETQDkpB+j9Mfd+bwIy1+zh6iSEe9dWM9g==
=/fW+
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM x86 fixes from Paolo Bonzini:
- Disable AVIC on SNP-enabled systems that don't allow writes to the
virtual APIC page, as such hosts will hit unexpected RMP #PFs in the
host when running VMs of any flavor.
- Fix a WARN in the hypercall completion path due to KVM trying to
determine if a guest with protected register state is in 64-bit mode
(KVM's ABI is to assume such guests only make hypercalls in 64-bit
mode).
- Allow the guest to write to supported bits in MSR_AMD64_DE_CFG to fix
a regression with Windows guests, and because KVM's read-only
behavior appears to be entirely made up.
- Treat TDP MMU faults as spurious if the faulting access is allowed
given the existing SPTE. This fixes a benign WARN (other than the
WARN itself) due to unexpectedly replacing a writable SPTE with a
read-only SPTE.
- Emit a warning when KVM is configured with ignore_msrs=1 and also to
hide the MSRs that the guest is looking for from the kernel logs.
ignore_msrs can trick guests into assuming that certain processor
features are present, and this in turn leads to bogus bug reports.
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: let it be known that ignore_msrs is a bad idea
KVM: VMX: don't include '<linux/find.h>' directly
KVM: x86/mmu: Treat TDP MMU faults as spurious if access is already allowed
KVM: SVM: Allow guest writes to set MSR_AMD64_DE_CFG bits
KVM: x86: Play nice with protected guests in complete_hypercall_exit()
KVM: SVM: Disable AVIC on SNP-enabled system without HvInUseWrAllowed feature
Rework __kvm_emulate_hypercall() into a macro so that completion of
hypercalls that don't exit to userspace use direct function calls to the
completion helper, i.e. don't trigger a retpoline when RETPOLINE=y.
Opportunistically take the names of the input registers, as opposed to
taking the input values, to preemptively dedup more of the calling code
(TDX needs to use different registers). Use the direct GPR accessors to
read values to avoid the pointless marking of the registers as available
(KVM requires GPRs to always be available).
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Message-ID: <20241128004344.4072099-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Finish "emulation" of KVM hypercalls by function callback, even when the
hypercall is handled entirely within KVM, i.e. doesn't require an exit to
userspace, and refactor __kvm_emulate_hypercall()'s return value to *only*
communicate whether or not KVM should exit to userspace or resume the
guest.
(Ab)Use vcpu->run->hypercall.ret to propagate the return value to the
callback, purely to avoid having to add a trampoline for every completion
callback.
Using the function return value for KVM's control flow eliminates the
multiplexed return value, where '0' for KVM_HC_MAP_GPA_RANGE (and only
that hypercall) means "exit to userspace".
Note, the unnecessary extra indirect call and thus potential retpoline
will be eliminated in the near future by converting the intermediate layer
to a macro.
Suggested-by: Binbin Wu <binbin.wu@linux.intel.com>
Suggested-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Message-ID: <20241128004344.4072099-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Increment the "hypercalls" stat for KVM hypercalls as soon as KVM knows
it will skip the guest instruction, i.e. once KVM is committed to emulating
the hypercall. Waiting until completion adds no known value, and creates a
discrepancy where the stat will be bumped if KVM exits to userspace as a
result of trying to skip the instruction, but not if the hypercall itself
exits.
Handling the stat in common code will also avoid the need for another
helper to dedup code when TDX comes along (TDX needs a separate completion
path due to GPR usage differences).
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-ID: <20241128004344.4072099-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the declarations for the hypercall emulation APIs to x86.h. While the
helpers are exported, they are intended to be consumed only by KVM vendor
modules, i.e. don't need to be exposed to the kernel at-large.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-ID: <20241128004344.4072099-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add and use user_exit_on_hypercall() to check if userspace wants to handle
a KVM hypercall instead of open-coding the logic everywhere.
No functional change intended.
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
Reviewed-by: Isaku Yamahata <isaku.yamahata@intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
[sean: squash into one patch, keep explicit KVM_HC_MAP_GPA_RANGE check]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-ID: <20241128004344.4072099-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
QEMU up to 9.2.0 is assuming that vcpu->run->hypercall.ret is 0 on exit and
it never modifies it when processing KVM_EXIT_HYPERCALL. Make this explicit
in the code, to avoid breakage when KVM starts modifying that field.
This in principle is not a good idea... It would have been much better if
KVM had set the field to -KVM_ENOSYS from the beginning, so that a dumb
userspace that does nothing on KVM_EXIT_HYPERCALL would tell the guest it
does not support KVM_HC_MAP_GPA_RANGE. However, breaking userspace is
a Very Bad Thing, as everybody should know.
Reported-by: Binbin Wu <binbin.wu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Disable AVIC on SNP-enabled systems that don't allow writes to the virtual
APIC page, as such hosts will hit unexpected RMP #PFs in the host when
running VMs of any flavor.
- Fix a WARN in the hypercall completion path due to KVM trying to determine
if a guest with protected register state is in 64-bit mode (KVM's ABI is to
assume such guests only make hypercalls in 64-bit mode).
- Allow the guest to write to supported bits in MSR_AMD64_DE_CFG to fix a
regression with Windows guests, and because KVM's read-only behavior appears
to be entirely made up.
- Treat TDP MMU faults as spurious if the faulting access is allowed given the
existing SPTE. This fixes a benign WARN (other than the WARN itself) due to
unexpectedly replacing a writable SPTE with a read-only SPTE.
-----BEGIN PGP SIGNATURE-----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=S9jc
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-fixes-6.13-rcN' of https://github.com/kvm-x86/linux into HEAD
KVM x86 fixes for 6.13:
- Disable AVIC on SNP-enabled systems that don't allow writes to the virtual
APIC page, as such hosts will hit unexpected RMP #PFs in the host when
running VMs of any flavor.
- Fix a WARN in the hypercall completion path due to KVM trying to determine
if a guest with protected register state is in 64-bit mode (KVM's ABI is to
assume such guests only make hypercalls in 64-bit mode).
- Allow the guest to write to supported bits in MSR_AMD64_DE_CFG to fix a
regression with Windows guests, and because KVM's read-only behavior appears
to be entirely made up.
- Treat TDP MMU faults as spurious if the faulting access is allowed given the
existing SPTE. This fixes a benign WARN (other than the WARN itself) due to
unexpectedly replacing a writable SPTE with a read-only SPTE.
- Disable AVIC on SNP-enabled systems that don't allow writes to the virtual
APIC page, as such hosts will hit unexpected RMP #PFs in the host when
running VMs of any flavor.
- Fix a WARN in the hypercall completion path due to KVM trying to determine
if a guest with protected register state is in 64-bit mode (KVM's ABI is to
assume such guests only make hypercalls in 64-bit mode).
- Allow the guest to write to supported bits in MSR_AMD64_DE_CFG to fix a
regression with Windows guests, and because KVM's read-only behavior appears
to be entirely made up.
- Treat TDP MMU faults as spurious if the faulting access is allowed given the
existing SPTE. This fixes a benign WARN (other than the WARN itself) due to
unexpectedly replacing a writable SPTE with a read-only SPTE.
-----BEGIN PGP SIGNATURE-----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=S9jc
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-fixes-6.13-rcN' of https://github.com/kvm-x86/linux into HEAD
KVM x86 fixes for 6.13:
- Disable AVIC on SNP-enabled systems that don't allow writes to the virtual
APIC page, as such hosts will hit unexpected RMP #PFs in the host when
running VMs of any flavor.
- Fix a WARN in the hypercall completion path due to KVM trying to determine
if a guest with protected register state is in 64-bit mode (KVM's ABI is to
assume such guests only make hypercalls in 64-bit mode).
- Allow the guest to write to supported bits in MSR_AMD64_DE_CFG to fix a
regression with Windows guests, and because KVM's read-only behavior appears
to be entirely made up.
- Treat TDP MMU faults as spurious if the faulting access is allowed given the
existing SPTE. This fixes a benign WARN (other than the WARN itself) due to
unexpectedly replacing a writable SPTE with a read-only SPTE.
When running KVM with ignore_msrs=1 and report_ignored_msrs=0, the user has
no clue that that the guest is being lied to. This may cause bug reports
such as https://gitlab.com/qemu-project/qemu/-/issues/2571, where enabling
a CPUID bit in QEMU caused Linux guests to try reading MSR_CU_DEF_ERR; and
being lied about the existence of MSR_CU_DEF_ERR caused the guest to assume
other things about the local APIC which were not true:
Sep 14 12:02:53 kernel: mce: [Firmware Bug]: Your BIOS is not setting up LVT offset 0x2 for deferred error IRQs correctly.
Sep 14 12:02:53 kernel: unchecked MSR access error: RDMSR from 0x852 at rIP: 0xffffffffb548ffa7 (native_read_msr+0x7/0x40)
Sep 14 12:02:53 kernel: Call Trace:
...
Sep 14 12:02:53 kernel: native_apic_msr_read+0x20/0x30
Sep 14 12:02:53 kernel: setup_APIC_eilvt+0x47/0x110
Sep 14 12:02:53 kernel: mce_amd_feature_init+0x485/0x4e0
...
Sep 14 12:02:53 kernel: [Firmware Bug]: cpu 0, try to use APIC520 (LVT offset 2) for vector 0xf4, but the register is already in use for vector 0x0 on this cpu
Without reported_ignored_msrs=0 at least the host kernel log will contain
enough information to avoid going on a wild goose chase. But if reports
about individual MSR accesses are being silenced too, at least complain
loudly the first time a VM is started.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The header clearly states that it does not want to be included directly,
only via '<linux/bitmap.h>'. Replace the include accordingly.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Message-ID: <20241217070539.2433-2-wsa+renesas@sang-engineering.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reduce latency by taking advantage of the property vaesenclast(key, a) ^
b == vaesenclast(key ^ b, a), like I did in the AES-GCM code.
Also replace a vpand and vpxor with a vpternlogd.
On AMD Zen 5 this improves performance by about 3%. Intel performance
remains about the same, with a 0.1% improvement being seen on Icelake.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Prefer immediates of -128 to 128, since the former fits in a signed
byte, saving 3 bytes per instruction. Also prefer VEX-coded
instructions to EVEX where this is easy to do.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The AES-XTS assembly code currently treats the length as signed, since
this saves a few instructions in the loop compared to treating it as
unsigned. Therefore update the type to make this clear. (It is not
actually passed any values larger than PAGE_SIZE.)
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Improve some of the comments in aes-xts-avx-x86_64.S.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since aes-xts-avx-x86_64.S contains multiple functions, move the
register aliases for the parameters and local variables of the XTS
update function into the macro that generates that function. Then add
register aliases to aes_xts_encrypt_iv() to improve readability there.
This makes aes-xts-avx-x86_64.S consistent with the GCM assembly files.
No change in the generated code.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use .irp instead of repeating code.
No change in the generated code.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reorganize the main loop to free up the RNDKEYLAST[0-3] registers and
use them for more cached round keys. This improves performance by about
2% on AMD Zen 4 and Zen 5. Intel performance remains about the same.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Prefer immediates of -128 to 128, since the former fits in a signed
byte, saving 3 bytes per instruction. Also replace a vpand and vpxor
with a vpternlogd.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The new RDPMC enhancement, metrics clear mode, is to clear the
PERF_METRICS-related resources as well as the fixed-function performance
monitoring counter 3 after the read is performed. It is available for
ring 3. The feature is enumerated by the
IA32_PERF_CAPABILITIES.RDPMC_CLEAR_METRICS[bit 19]. To enable the
feature, the IA32_FIXED_CTR_CTRL.METRICS_CLEAR_EN[bit 14] must be set.
Two ways were considered to enable the feature.
- Expose a knob in the sysfs globally. One user may affect the
measurement of other users when changing the knob. The solution is
dropped.
- Introduce a new event format, metrics_clear, for the slots event to
disable/enable the feature only for the current process. Users can
utilize the feature as needed.
The latter solution is implemented in the patch.
The current KVM doesn't support the perf metrics yet. For
virtualization, the feature can be enabled later separately.
Suggested-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lkml.kernel.org/r/20241211160318.235056-1-kan.liang@linux.intel.com
The released OCR and FRONTEND events utilized more bits on Lunar Lake
p-core. The corresponding mask in the extra_regs has to be extended to
unblock the extra bits.
Add a dedicated intel_lnc_extra_regs.
Fixes: a932aa0e86 ("perf/x86: Add Lunar Lake and Arrow Lake support")
Reported-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20241216160252.430858-1-kan.liang@linux.intel.com
The header file linux/extable.h is included for
search_exception_tables(). That function is no longer used since commit:
c2508ec5a5 ("mm: introduce new 'lock_mm_and_find_vma()' page fault helper")
Remove it.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20241220084029.473617-1-bigeasy@linutronix.de
Treat slow-path TDP MMU faults as spurious if the access is allowed given
the existing SPTE to fix a benign warning (other than the WARN itself)
due to replacing a writable SPTE with a read-only SPTE, and to avoid the
unnecessary LOCK CMPXCHG and subsequent TLB flush.
If a read fault races with a write fault, fast GUP fails for any reason
when trying to "promote" the read fault to a writable mapping, and KVM
resolves the write fault first, then KVM will end up trying to install a
read-only SPTE (for a !map_writable fault) overtop a writable SPTE.
Note, it's not entirely clear why fast GUP fails, or if that's even how
KVM ends up with a !map_writable fault with a writable SPTE. If something
else is going awry, e.g. due to a bug in mmu_notifiers, then treating read
faults as spurious in this scenario could effectively mask the underlying
problem.
However, retrying the faulting access instead of overwriting an existing
SPTE is functionally correct and desirable irrespective of the WARN, and
fast GUP _can_ legitimately fail with a writable VMA, e.g. if the Accessed
bit in primary MMU's PTE is toggled and causes a PTE value mismatch. The
WARN was also recently added, specifically to track down scenarios where
KVM is unnecessarily overwrites SPTEs, i.e. treating the fault as spurious
doesn't regress KVM's bug-finding capabilities in any way. In short,
letting the WARN linger because there's a tiny chance it's due to a bug
elsewhere would be excessively paranoid.
Fixes: 1a175082b1 ("KVM: x86/mmu: WARN and flush if resolving a TDP MMU fault clears MMU-writable")
Reported-by: Lei Yang <leiyang@redhat.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219588
Tested-by: Lei Yang <leiyang@redhat.com>
Link: https://lore.kernel.org/r/20241218213611.3181643-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Drop KVM's arbitrary behavior of making DE_CFG.LFENCE_SERIALIZE read-only
for the guest, as rejecting writes can lead to guest crashes, e.g. Windows
in particular doesn't gracefully handle unexpected #GPs on the WRMSR, and
nothing in the AMD manuals suggests that LFENCE_SERIALIZE is read-only _if
it exists_.
KVM only allows LFENCE_SERIALIZE to be set, by the guest or host, if the
underlying CPU has X86_FEATURE_LFENCE_RDTSC, i.e. if LFENCE is guaranteed
to be serializing. So if the guest sets LFENCE_SERIALIZE, KVM will provide
the desired/correct behavior without any additional action (the guest's
value is never stuffed into hardware). And having LFENCE be serializing
even when it's not _required_ to be is a-ok from a functional perspective.
Fixes: 74a0e79df6 ("KVM: SVM: Disallow guest from changing userspace's MSR_AMD64_DE_CFG value")
Fixes: d1d93fa90f ("KVM: SVM: Add MSR-based feature support for serializing LFENCE")
Reported-by: Simon Pilkington <simonp.git@mailbox.org>
Closes: https://lore.kernel.org/all/52914da7-a97b-45ad-86a0-affdf8266c61@mailbox.org
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20241211172952.1477605-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use is_64_bit_hypercall() instead of is_64_bit_mode() to detect a 64-bit
hypercall when completing said hypercall. For guests with protected state,
e.g. SEV-ES and SEV-SNP, KVM must assume the hypercall was made in 64-bit
mode as the vCPU state needed to detect 64-bit mode is unavailable.
Hacking the sev_smoke_test selftest to generate a KVM_HC_MAP_GPA_RANGE
hypercall via VMGEXIT trips the WARN:
------------[ cut here ]------------
WARNING: CPU: 273 PID: 326626 at arch/x86/kvm/x86.h:180 complete_hypercall_exit+0x44/0xe0 [kvm]
Modules linked in: kvm_amd kvm ... [last unloaded: kvm]
CPU: 273 UID: 0 PID: 326626 Comm: sev_smoke_test Not tainted 6.12.0-smp--392e932fa0f3-feat #470
Hardware name: Google Astoria/astoria, BIOS 0.20240617.0-0 06/17/2024
RIP: 0010:complete_hypercall_exit+0x44/0xe0 [kvm]
Call Trace:
<TASK>
kvm_arch_vcpu_ioctl_run+0x2400/0x2720 [kvm]
kvm_vcpu_ioctl+0x54f/0x630 [kvm]
__se_sys_ioctl+0x6b/0xc0
do_syscall_64+0x83/0x160
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
---[ end trace 0000000000000000 ]---
Fixes: b5aead0064 ("KVM: x86: Assume a 64-bit hypercall for guests with protected state")
Cc: stable@vger.kernel.org
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Nikunj A Dadhania <nikunj@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20241128004344.4072099-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
On SNP-enabled system, VMRUN marks AVIC Backing Page as in-use while
the guest is running for both secure and non-secure guest. Any hypervisor
write to the in-use vCPU's AVIC backing page (e.g. to inject an interrupt)
will generate unexpected #PF in the host.
Currently, attempt to run AVIC guest would result in the following error:
BUG: unable to handle page fault for address: ff3a442e549cc270
#PF: supervisor write access in kernel mode
#PF: error_code(0x80000003) - RMP violation
PGD b6ee01067 P4D b6ee02067 PUD 10096d063 PMD 11c540063 PTE 80000001149cc163
SEV-SNP: PFN 0x1149cc unassigned, dumping non-zero entries in 2M PFN region: [0x114800 - 0x114a00]
...
Newer AMD system is enhanced to allow hypervisor to modify the backing page
for non-secure guest on SNP-enabled system. This enhancement is available
when the CPUID Fn8000_001F_EAX bit 30 is set (HvInUseWrAllowed).
This table describes AVIC support matrix w.r.t. SNP enablement:
| Non-SNP system | SNP system
-----------------------------------------------------
Non-SNP guest | AVIC Activate | AVIC Activate iff
| | HvInuseWrAllowed=1
-----------------------------------------------------
SNP guest | N/A | Secure AVIC
Therefore, check and disable AVIC in kvm_amd driver when the feature is not
available on SNP-enabled system.
See the AMD64 Architecture Programmer’s Manual (APM) Volume 2 for detail.
(https://www.amd.com/content/dam/amd/en/documents/processor-tech-docs/
programmer-references/40332.pdf)
Fixes: 216d106c7f ("x86/sev: Add SEV-SNP host initialization support")
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20241104075845.7583-1-suravee.suthikulpanit@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Remove the redundant .hwapic_irr_update() ops.
If a vCPU has APICv enabled, KVM updates its RVI before VM-enter to L1
in vmx_sync_pir_to_irr(). This guarantees RVI is up-to-date and aligned
with the vIRR in the virtual APIC. So, no need to update RVI every time
the vIRR changes.
Note that KVM never updates vmcs02 RVI in .hwapic_irr_update() or
vmx_sync_pir_to_irr(). So, removing .hwapic_irr_update() has no
impact to the nested case.
Signed-off-by: Chao Gao <chao.gao@intel.com>
Link: https://lore.kernel.org/r/20241111085947.432645-1-chao.gao@intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Move the handling of a nested posted interrupt notification that is
unblocked by nested VM-Enter (unblocks L1 IRQs when ack-on-exit is enabled
by L1) from VM-Enter emulation to vmx_check_nested_events(). To avoid a
pointless forced immediate exit, i.e. to not regress IRQ delivery latency
when a nested posted interrupt is pending at VM-Enter, block processing of
the notification IRQ if and only if KVM must block _all_ events. Unlike
injected events, KVM doesn't need to actually enter L2 before updating the
vIRR and vmcs02.GUEST_INTR_STATUS, as the resulting L2 IRQ will be blocked
by hardware itself, until VM-Enter to L2 completes.
Note, very strictly speaking, moving the IRQ from L2's PIR to IRR before
entering L2 is still technically wrong. But, practically speaking, only
an L1 hypervisor or an L0 userspace that is deliberately checking event
priority against PIR=>IRR processing can even notice; L2 will see
architecturally correct behavior, as KVM ensures the VM-Enter is finished
before doing anything that would effectively preempt the PIR=>IRR movement.
Reported-by: Chao Gao <chao.gao@intel.com>
Link: https://lore.kernel.org/r/20241101191447.1807602-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use vmcs01's execution controls shadow to check for IRQ/NMI windows after
a successful nested VM-Enter, instead of snapshotting the information prior
to emulating VM-Enter. It's quite difficult to see that the entire reason
controls are snapshot prior nested VM-Enter is to read them from vmcs01
(vmcs02 is loaded if nested VM-Enter is successful).
That could be solved with a comment, but explicitly using vmcs01's shadow
makes the code self-documenting to a certain extent.
No functional change intended (vmcs01's execution controls must not be
modified during emulation of nested VM-Enter).
Link: https://lore.kernel.org/r/20241101191447.1807602-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Drop the manual check for a pending IRQ in vmcs01's RVI field during
nested VM-Enter, as the recently added call to kvm_apic_has_interrupt()
when checking for pending events after successful VM-Enter is a superset
of the RVI check (IRQs that are pending in RVI are also pending in L1's
IRR).
Link: https://lore.kernel.org/r/20241101191447.1807602-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Explicitly check for a pending INIT or SIPI after entering non-root mode
during nested VM-Enter emulation, as no VMCS information is quered as part
of the check, i.e. there is no need to check for INIT/SIPI while vmcs01 is
still loaded.
Link: https://lore.kernel.org/r/20241101191447.1807602-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Always request pending event evaluation after successful nested VM-Enter
if L1 has a pending IRQ, as KVM will effectively do so anyways when APICv
is enabled, by way of vmx_has_apicv_interrupt(). This will allow dropping
the aforementioned APICv check, and will also allow handling nested Posted
Interrupt processing entirely within vmx_check_nested_events(), which is
necessary to honor priority between concurrent events.
Note, checking for pending IRQs has a subtle side effect, as it results in
a PPR update for L1's vAPIC (PPR virtualization does happen at VM-Enter,
but for nested VM-Enter that affects L2's vAPIC, not L1's vAPIC). However,
KVM updates PPR _constantly_, even when PPR technically shouldn't be
refreshed, e.g. kvm_vcpu_has_events() re-evaluates PPR if IRQs are
unblocked, by way of the same kvm_apic_has_interrupt() check. Ditto for
nested VM-Enter itself, when nested posted interrupts are enabled. Thus,
trying to avoid a PPR update on VM-Enter just to be pedantically accurate
is ridiculous, given the behavior elsewhere in KVM.
Link: https://lore.kernel.org/kvm/20230312180048.1778187-1-jason.cj.chen@intel.com
Closes: https://lore.kernel.org/all/20240920080012.74405-1-mankku@gmail.com
Signed-off-by: Chao Gao <chao.gao@intel.com>
Link: https://lore.kernel.org/r/20241101191447.1807602-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Allow toggling other bits in MSR_IA32_RTIT_CTL if the enable bit is being
cleared, the existing logic simply ignores the enable bit. E.g. KVM will
incorrectly reject a write of '0' to stop tracing.
Fixes: bf8c55d8dc ("KVM: x86: Implement Intel PT MSRs read/write emulation")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
[sean: rework changelog, drop stable@]
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20241101185031.1799556-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
If KVM emulates an EOI for L1's virtual APIC while L2 is active, defer
updating GUEST_INTERUPT_STATUS.SVI, i.e. the VMCS's cache of the highest
in-service IRQ, until L1 is active, as vmcs01, not vmcs02, needs to track
vISR. The missed SVI update for vmcs01 can result in L1 interrupts being
incorrectly blocked, e.g. if there is a pending interrupt with lower
priority than the interrupt that was EOI'd.
This bug only affects use cases where L1's vAPIC is effectively passed
through to L2, e.g. in a pKVM scenario where L2 is L1's depriveleged host,
as KVM will only emulate an EOI for L1's vAPIC if Virtual Interrupt
Delivery (VID) is disabled in vmc12, and L1 isn't intercepting L2 accesses
to its (virtual) APIC page (or if x2APIC is enabled, the EOI MSR).
WARN() if KVM updates L1's ISR while L2 is active with VID enabled, as an
EOI from L2 is supposed to affect L2's vAPIC, but still defer the update,
to try to keep L1 alive. Specifically, KVM forwards all APICv-related
VM-Exits to L1 via nested_vmx_l1_wants_exit():
case EXIT_REASON_APIC_ACCESS:
case EXIT_REASON_APIC_WRITE:
case EXIT_REASON_EOI_INDUCED:
/*
* The controls for "virtualize APIC accesses," "APIC-
* register virtualization," and "virtual-interrupt
* delivery" only come from vmcs12.
*/
return true;
Fixes: c7c9c56ca2 ("x86, apicv: add virtual interrupt delivery support")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/kvm/20230312180048.1778187-1-jason.cj.chen@intel.com
Reported-by: Markku Ahvenjärvi <mankku@gmail.com>
Closes: https://lore.kernel.org/all/20240920080012.74405-1-mankku@gmail.com
Cc: Janne Karhunen <janne.karhunen@gmail.com>
Signed-off-by: Chao Gao <chao.gao@intel.com>
[sean: drop request, handle in VMX, write changelog]
Tested-by: Chao Gao <chao.gao@intel.com>
Link: https://lore.kernel.org/r/20241128000010.4051275-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Print pending requests in the kvm_exit tracepoint, which allows userspace
to gather information on how often KVM interrupts vCPUs due to specific
requests.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20240910200350.264245-3-mlevitsk@redhat.com
[sean: massage changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add VMX/SVM specific interrupt injection info the kvm_entry tracepoint.
As is done with kvm_exit, gather the information via a kvm_x86_ops hook
to avoid the moderately costly VMREADs on VMX when the tracepoint isn't
enabled.
Opportunistically rename the parameters in the get_exit_info()
declaration to match the names used by both SVM and VMX.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20240910200350.264245-2-mlevitsk@redhat.com
[sean: drop is_guest_mode() change, use intr_info/error_code for names]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Detect unhandleable vectoring in check_emulate_instruction() to prevent
infinite retry loops on SVM, and to eliminate the main differences in how
VM-Exits during event vectoring are handled on SVM versus VMX. E.g. if
the vCPU puts its IDT in emulated MMIO memory and generates an event,
without the check_emulate_instruction() change, SVM will re-inject the
event and resume the guest, and effectively put the vCPU into an infinite
loop.
Signed-off-by: Ivan Orlov <iorlov@amazon.com>
Link: https://lore.kernel.org/r/20241217181458.68690-6-iorlov@amazon.com
[sean: grab "svm" locally, massage changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Move handling of emulation during event vectoring, which KVM doesn't
support, into VMX's check_emulate_instruction(), so that KVM detects
all unsupported emulation, not just cached emulated MMIO (EPT misconfig).
E.g. on emulated MMIO that isn't cached (EPT Violation) or occurs with
legacy shadow paging (#PF).
Rejecting emulation on other sources of emulation also fixes a largely
theoretical flaw (thanks to the "unprotect and retry" logic), where KVM
could incorrectly inject a #DF:
1. CPU executes an instruction and hits a #GP
2. While vectoring the #GP, a shadow #PF occurs
3. On the #PF VM-Exit, KVM re-injects #GP
4. KVM emulates because of the write-protected page
5. KVM "successfully" emulates and also detects the #GP
6. KVM synthesizes a #GP, and since #GP has already been injected,
incorrectly escalates to a #DF.
Fix the comment about EMULTYPE_PF as this flag doesn't necessarily
mean MMIO anymore: it can also be set due to the write protection
violation.
Note, handle_ept_misconfig() checks vmx_check_emulate_instruction() before
attempting emulation of any kind.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Ivan Orlov <iorlov@amazon.com>
Link: https://lore.kernel.org/r/20241217181458.68690-5-iorlov@amazon.com
[sean: massage changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
If emulation is "rejected" by check_emulate_instruction(), try to
unprotect and retry instruction execution before reporting the error to
userspace. Currently, check_emulate_instruction() never signals failure
when "unprotect and retry" is possible, but that will change in the
future as both VMX and SVM will reject emulation due to coincident
exception vectoring. E.g. if there is a write to a shadowed page table
when vectoring an event, then unprotecting the gfn and retrying the
instruction will allow the guest to make forward progress in most cases,
i.e. will allow the vCPU to keep running instead of returning an error to
userspace.
This ensures that the subsequent patches won't make KVM exit to
userspace when handling an intercepted #PF during vectoring without
checking whether unprotect and retry is possible.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Ivan Orlov <iorlov@amazon.com>
Link: https://lore.kernel.org/r/20241217181458.68690-4-iorlov@amazon.com
[sean: massage changelog to clarify this is a nop for the current code]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add emulation status for unhandleable vectoring, i.e. when KVM can't
emulate an instruction because emulation was triggered on an exit that
occurred while the CPU was vectoring an event. Such a situation can
occur if guest sets the IDT descriptor base to point to MMIO region,
and triggers an exception after that.
Exit to userspace with event delivery error when KVM can't emulate
an instruction when vectoring an event.
Signed-off-by: Ivan Orlov <iorlov@amazon.com>
Link: https://lore.kernel.org/r/20241217181458.68690-3-iorlov@amazon.com
[sean: massage changelog and X86EMUL_UNHANDLEABLE_VECTORING comment]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Extract VMX code for unhandleable VM-Exit during vectoring into
vendor-agnostic function so that boiler-plate code can be shared by SVM.
To avoid unnecessarily complexity in the helper, unconditionally report a
GPA to userspace instead of having a conditional entry. For exits that
don't report a GPA, i.e. everything except EPT Misconfig, simply report
KVM's "invalid GPA".
Signed-off-by: Ivan Orlov <iorlov@amazon.com>
Link: https://lore.kernel.org/r/20241217181458.68690-2-iorlov@amazon.com
[sean: clarify that the INVALID_GPA logic is new]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Refactor the kvm_cpu_cap_init() macro magic to collect supported features
in a local variable instead of passing them to the macro as a "mask". As
pointed out by Maxim, relying on macros to "return" a value and set local
variables is surprising, as the bitwise-OR logic suggests the macros are
pure, i.e. have no side effects.
Ideally, the feature initializers would have zero side effects, e.g. would
take local variables as params, but there isn't a sane way to do so
without either sacrificing the various compile-time assertions (basically
a non-starter), or passing at least one variable, e.g. a struct, to each
macro usage (adds a lot of noise and boilerplate code).
Opportunistically force callers to emit a trailing comma by intentionally
omitting a semicolon after invoking the feature initializers. Forcing a
trailing comma isotales futures changes to a single line, i.e. doesn't
cause churn for unrelated features/lines when adding/removing/modifying a
feature.
No functional change intended.
Suggested-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20241128013424.4096668-58-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Old TDX modules can clobber RBP in the TDH.VP.ENTER SEAMCALL. However
RBP is used as frame pointer in the x86_64 calling convention, and
clobbering RBP could result in bad things like being unable to unwind
the stack if any non-maskable exceptions (NMI, #MC etc) happens in that
gap.
A new "NO_RBP_MOD" feature was introduced to more recent TDX modules to
not clobber RBP. KVM will need to use the TDH.VP.ENTER SEAMCALL to run
TDX guests. It won't be safe to run TDX guests w/o this feature. To
prevent it, just don't initialize the TDX module if this feature is not
supported [1].
Note the bit definitions of TDX_FEATURES0 are not auto-generated in
tdx_global_metadata.h. Manually define a macro for it in "tdx.h".
Signed-off-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/fc0e8ab7-86d4-4428-be31-82e1ece6dd21@intel.com/ [1]
Link: https://lore.kernel.org/all/76ae5025502c84d799e3a56a6fc4f69a82da8f93.1734188033.git.kai.huang%40intel.com
Continue the process to have a centralized solution for TDX global
metadata reading. Now that the new autogenerated solution is ready for
use, switch to it and remove the old one.
Signed-off-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/all/fc025d1e13b92900323f47cfe9aac3157bf08ee7.1734188033.git.kai.huang%40intel.com
Currently, the 'struct tdmr_sys_info_tdmr' which includes TDMR related
fields defines the PAMT entry sizes for TDX supported page sizes (4KB,
2MB and 1GB) as an array:
struct tdx_sys_info_tdmr {
...
u16 pamt_entry_sizes[TDX_PS_NR];
};
PAMT entry sizes are needed when allocating PAMTs for each TDMR. Using
the array to contain PAMT entry sizes reduces the number of arguments
that need to be passed when calling tdmr_set_up_pamt(). It also makes
the code pattern like below clearer:
for (pgsz = TDX_PS_4K; pgsz < TDX_PS_NR; pgsz++) {
pamt_size[pgsz] = tdmr_get_pamt_sz(tdmr, pgsz,
pamt_entry_size[pgsz]);
tdmr_pamt_size += pamt_size[pgsz];
}
However, the auto-generated metadata reading code generates a structure
member for each field. The 'global_metadata.json' has a dedicated field
for each PAMT entry size, and the new 'struct tdx_sys_info_tdmr' looks
like:
struct tdx_sys_info_tdmr {
...
u16 pamt_4k_entry_size;
u16 pamt_2m_entry_size;
u16 pamt_1g_entry_size;
};
Prepare to use the autogenerated code by making the existing 'struct
tdx_sys_info_tdmr' look like the generated one. When passing to
tdmrs_set_up_pamt_all(), build a local array of PAMT entry sizes from
the structure so the code to allocate PAMTs can stay the same.
Signed-off-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/all/ccf46f3dacb01be1fb8309592616d443ac17caba.1734188033.git.kai.huang%40intel.com
The TDX module provides a set of "Global Metadata Fields". They report
things like TDX module version, supported features, and fields related
to create/run TDX guests and so on.
Currently the kernel only reads "TD Memory Region" (TDMR) related fields
for module initialization. There are needs to read more global metadata
fields for future use:
- Supported features ("TDX_FEATURES0") to fail module initialization
when the module doesn't support "not clobbering host RBP when exiting
from TDX guest" feature [1].
- KVM TDX baseline support and other features like TDX Connect will
need to read more.
The current global metadata reading code has limitations (e.g., it only
has a primitive helper to read metadata field with 16-bit element size,
while TDX supports 8/16/32/64 bits metadata element sizes). It needs
tweaks in order to read more metadata fields.
But even with the tweaks, when new code is added to read a new field,
the reviewers will still need to review against the spec to make sure
the new code doesn't screw up things like using the wrong metadata
field ID (each metadata field is associated with a unique field ID,
which is a TDX-defined u64 constant) etc.
TDX documents all global metadata fields in a 'global_metadata.json'
file as part of TDX spec [2]. JSON format is machine readable. Instead
of tweaking the metadata reading code, use a script to generate the code
so that:
1) Using the generated C is simple.
2) Adding a field is simple, e.g., the script just pulls the field ID
out of the JSON for a given field thus no manual review is needed.
Specifically, to match the layout of the 'struct tdx_sys_info' and its
sub-structures, the script uses a table with each entry containing the
the name of the sub-structures (which reflects the "Class") and the
"Field Name" of all its fields, and auto-generate:
1) The 'struct tdx_sys_info' and all 'struct tdx_sys_info_xx'
sub-structures in 'tdx_global_metadata.h'.
2) The main function 'get_tdx_sys_info()' which reads all metadata to
'struct tdx_sys_info' and the 'get_tdx_sys_info_xx()' functions
which read 'struct tdx_sys_info_xx()' in 'tdx_global_metadata.c'.
Using the generated C is simple: 1) include "tdx_global_metadata.h" to
the local "tdx.h"; 2) explicitly include "tdx_global_metadata.c" to the
local "tdx.c" after the read_sys_metadata_field() primitive (which is a
wrapper of TDH.SYS.RD SEAMCALL to read global metadata).
Adding a field is also simple: 1) just add the new field to an existing
structure, or add it with a new structure; 2) re-run the script to
generate the new code; 3) update the existing tdx_global_metadata.{hc}
with the new ones.
For now, use the auto-generated code to read the TDMR related fields and
the aforesaid metadata field "TDX_FEATURES0".
The tdx_global_metadata.{hc} can be generated by running below:
#python tdx_global_metadata.py global_metadata.json \
tdx_global_metadata.h tdx_global_metadata.c
.. where the 'global_metadata.json' can be fetched from [2] and the
'tdx_global_metadata.py' can be found from [3].
Co-developed-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/fc0e8ab7-86d4-4428-be31-82e1ece6dd21@intel.com/ [1]
Link: https://cdrdv2.intel.com/v1/dl/getContent/795381 [2]
Link: https://lore.kernel.org/762a50133300710771337398284567b299a86f67.camel@intel.com/ [3]
Link: https://lore.kernel.org/all/cbe3f12b1e5479399b53f4873f2ff783d9fc669b.1734188033.git.kai.huang%40intel.com
The TDX module provides a set of "Global Metadata Fields". They report
things like TDX module version, supported features, and fields related
to create/run TDX guests and so on.
Today the kernel only reads "TD Memory Region" (TDMR) related fields for
module initialization. KVM will need to read additional metadata fields
to run TDX guests. Move towards having the TDX host core-kernel provide
a centralized, canonical, and immutable structure for the global
metadata that comes out from the TDX module for all kernel components to
use.
As the first step, introduce a new 'struct tdx_sys_info' to track all
global metadata fields.
TDX categorizes global metadata fields into different "Classes". E.g.,
the TDMR related fields are under class "TDMR Info". Instead of making
'struct tdx_sys_info' a plain structure to contain all metadata fields,
organize them in smaller structures based on the "Class".
This allows those metadata fields to be used in finer granularity thus
makes the code clearer. E.g., construct_tdmrs() can just take the
structure which contains "TDMR Info" metadata fields.
Add get_tdx_sys_info() as the placeholder to read all metadata fields.
Have it only call get_tdx_sys_info_tdmr() to read TDMR related fields
for now.
Place get_tdx_sys_info() as the first step of init_tdx_module() to
enable early prerequisite checks on the metadata to support early module
initialization abort. This results in moving get_tdx_sys_info_tdmr() to
be before build_tdx_memlist(), but this is fine because there are no
dependencies between these two functions.
Signed-off-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/all/bfacb4e90527cf79d4be0d1753e6f318eea21118.1734188033.git.kai.huang%40intel.com
The TDX module provides a set of "Global Metadata Fields". They report
things like TDX module version, supported features, and fields related
to create/run TDX guests and so on.
TDX organizes those metadata fields by "Classes" based on the meaning of
those fields. E.g., for now the kernel only reads "TD Memory Region"
(TDMR) related fields for module initialization. Those fields are
defined under class "TDMR Info".
Today the kernel reads some of the global metadata to initialize the TDX
module. KVM will need to read additional metadata fields to run TDX
guests. Move towards having the TDX host core-kernel provide a
centralized, canonical, and immutable structure for the global metadata
that comes out from the TDX module for all kernel components to use.
More specifically, prepare the code to end up with an organization like:
struct tdx_sys_info {
struct tdx_sys_info_classA a;
struct tdx_sys_info_classB b;
...
};
Currently the kernel organizes all fields under "TDMR Info" class in
'struct tdx_tdmr_sysinfo'. Prepare for the above by renaming the
structure to 'struct tdx_sys_info_tdmr' to follow the class name better.
No functional change intended.
Signed-off-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/all/de165d09e0b571cfeb119a368f4be6e2888ebb93.1734188033.git.kai.huang%40intel.com
Add one last (hopefully) CPUID feature macro, RUNTIME_F(), and use it
to track features that KVM supports, but that are only set at runtime
(in response to other state), and aren't advertised to userspace via
KVM_GET_SUPPORTED_CPUID.
Currently, RUNTIME_F() is mostly just documentation, but tracking all
KVM-supported features will allow for asserting, at build time, take),
that all features that are set, cleared, *or* checked by KVM are known to
kvm_set_cpu_caps().
No functional change intended.
Link: https://lore.kernel.org/r/20241128013424.4096668-57-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add another CPUID feature macro, VENDOR_F(), and use it to track features
that KVM supports, but that need additional vendor support and so are
conditionally enabled in vendor code.
Currently, VENDOR_F() is mostly just documentation, but tracking all
KVM-supported features will allow for asserting, at build time, take),
that all features that are set, cleared, *or* checked by KVM are known to
kvm_set_cpu_caps().
To fudge around a macro collision on 32-bit kernels, #undef DS to be able
to get at X86_FEATURE_DS.
No functional change intended.
Link: https://lore.kernel.org/r/20241128013424.4096668-56-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Now that each feature flag is on its own line, i.e. brevity isn't a major
concern, drop the "SF" acronym and use the (almost) full name, SCATTERED_F.
No functional change intended.
Link: https://lore.kernel.org/r/20241128013424.4096668-55-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Don't memcpy() all of boot_cpu_data.x86_capability, and instead explicitly
fill each kvm_cpu_cap_init leaf during kvm_cpu_cap_init(). While clever,
copying all kernel capabilities risks over-reporting KVM capabilities,
e.g. if KVM added support in __do_cpuid_func(), but neglected to init the
supported set of capabilities.
Note, explicitly grabbing leafs deliberately keeps Linux-defined leafs as
0! KVM should never advertise Linux-defined leafs; any relevant features
that are "real", but scattered, must be gathered in their correct hardware-
defined leaf.
Link: https://lore.kernel.org/r/20241128013424.4096668-54-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add yet another CPUID macro, this time for features that the host kernel
synthesizes into boot_cpu_data, i.e. that the kernel force sets even in
situations where the feature isn't reported by CPUID. Thanks to the
macro shenanigans of kvm_cpu_cap_init(), such features can now be handled
in the core CPUID framework, i.e. don't need to be handled out-of-band and
thus without as many guardrails.
Adding a dedicated macro also helps document what's going on, e.g. the
calls to kvm_cpu_cap_check_and_set() are very confusing unless the reader
knows exactly how kvm_cpu_cap_init() generates kvm_cpu_caps (and even
then, it's far from obvious).
Link: https://lore.kernel.org/r/20241128013424.4096668-53-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Drop the manual boot_cpu_has() checks on XSAVE when adjusting the guest's
XSAVES capabilities now that guest cpu_caps incorporates KVM's support.
The guest's cpu_caps are initialized from kvm_cpu_caps, which are in turn
initialized from boot_cpu_data, i.e. checking guest_cpu_cap_has() also
checks host/KVM capabilities (which is the entire point of cpu_caps).
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20241128013424.4096668-52-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Switch all queries (except XSAVES) of guest features from guest CPUID to
guest capabilities, i.e. replace all calls to guest_cpuid_has() with calls
to guest_cpu_cap_has().
Keep guest_cpuid_has() around for XSAVES, but subsume its helper
guest_cpuid_get_register() and add a compile-time assertion to prevent
using guest_cpuid_has() for any other feature. Add yet another comment
for XSAVE to explain why KVM is allowed to query its raw guest CPUID.
Opportunistically drop the unused guest_cpuid_clear(), as there should be
no circumstance in which KVM needs to _clear_ a guest CPUID feature now
that everything is tracked via cpu_caps. E.g. KVM may need to _change_
a feature to emulate dynamic CPUID flags, but KVM should never need to
clear a feature in guest CPUID to prevent it from being used by the guest.
Delete the last remnants of the governed features framework, as the lone
holdout was vmx_adjust_secondary_exec_control()'s divergent behavior for
governed vs. ungoverned features.
Note, replacing guest_cpuid_has() checks with guest_cpu_cap_has() when
computing reserved CR4 bits is a nop when viewed as a whole, as KVM's
capabilities are already incorporated into the calculation, i.e. if a
feature is present in guest CPUID but unsupported by KVM, its CR4 bit
was already being marked as reserved, checking guest_cpu_cap_has() simply
double-stamps that it's a reserved bit.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20241128013424.4096668-51-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Move the implementations of guest_has_{spec_ctrl,pred_cmd}_msr() down
below guest_cpu_cap_has() so that their use of guest_cpuid_has() can be
replaced with calls to guest_cpu_cap_has().
No functional change intended.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20241128013424.4096668-50-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
When updating guest CPUID entries to emulate runtime behavior, e.g. when
the guest enables a CR4-based feature that is tied to a CPUID flag, also
update the vCPU's cpu_caps accordingly. This will allow replacing all
usage of guest_cpuid_has() with guest_cpu_cap_has().
Note, this relies on kvm_set_cpuid() taking a snapshot of cpu_caps before
invoking kvm_update_cpuid_runtime(), i.e. when KVM is updating CPUID
entries that *may* become the vCPU's CPUID, so that unwinding to the old
cpu_caps is possible if userspace tries to set bogus CPUID information.
Note #2, none of the features in question use guest_cpu_cap_has() at this
time, i.e. aside from settings bits in cpu_caps, this is a glorified nop.
Cc: Yang Weijiang <weijiang.yang@intel.com>
Cc: Robert Hoo <robert.hoo.linux@gmail.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20241128013424.4096668-49-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
When making runtime CPUID updates, change OSXSAVE and OSPKE even if their
respective base features (XSAVE, PKU) are not supported by the host. KVM
already incorporates host support in the vCPU's effective reserved CR4 bits.
I.e. OSXSAVE and OSPKE can be set if and only if the host supports them.
And conversely, since KVM's ABI is that KVM owns the dynamic OS feature
flags, clearing them when they obviously aren't supported and thus can't
be enabled is arguably a fix.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20241128013424.4096668-48-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
