5-level paging only supports SPARSEMEM_VMEMMAP. CONFIG_X86_5LEVEL is
being phased out, making 5-level paging support mandatory.
Make CONFIG_SPARSEMEM_VMEMMAP mandatory for x86-64 and eliminate
any associated conditional statements.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250516123306.3812286-3-kirill.shutemov@linux.intel.com
Dynamic memory layout is used by KASLR and 5-level paging.
CONFIG_X86_5LEVEL is going to be removed, making 5-level paging support
unconditional which requires unconditional support of dynamic memory
layout.
Remove CONFIG_DYNAMIC_MEMORY_LAYOUT.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250516123306.3812286-2-kirill.shutemov@linux.intel.com
of_node_to_fwnode() is irqdomain's reimplementation of the "officially"
defined of_fwnode_handle(). The former is in the process of being
removed, so use the latter instead.
[ tglx: Fix up subject prefix ]
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-11-jirislaby@kernel.org
Virtual machines can exploit bus locks to degrade the performance of
the system. Bus locks can be caused by Non-WB(Write back) and
misaligned locked RMW (Read-modify-Write) instructions and require
systemwide synchronization among all processors which can result into
significant performance penalties.
To address this issue, the Bus Lock Threshold feature is introduced to
provide ability to hypervisor to restrict guests' capability of
initiating mulitple buslocks, thereby preventing system slowdowns.
Support for the buslock threshold is indicated via CPUID function
0x8000000A_EDX[29].
On the processors that support the Bus Lock Threshold feature, the
VMCB provides a Bus Lock Threshold enable bit and an unsigned 16-bit
Bus Lock threshold count.
VMCB intercept bit
VMCB Offset Bits Function
14h 5 Intercept bus lock operations
Bus lock threshold count
VMCB Offset Bits Function
120h 15:0 Bus lock counter
When a VMRUN instruction is executed, the bus lock threshold count is
loaded into an internal count register. Before the processor executes
a bus lock in the guest, it checks the value of this register:
- If the value is greater than '0', the processor successfully
executes the bus lock and decrements the count.
- If the value is '0', the bus lock is not executed, and a #VMEXIT to
the VMM is taken.
The bus lock threshold #VMEXIT is reported to the VMM with the VMEXIT
code A5h, SVM_EXIT_BUS_LOCK.
Signed-off-by: Nikunj A Dadhania <nikunj@amd.com>
Co-developed-by: Manali Shukla <manali.shukla@amd.com>
Signed-off-by: Manali Shukla <manali.shukla@amd.com>
Link: https://lore.kernel.org/r/20250502050346.14274-4-manali.shukla@amd.com
[sean: rewrite shortlog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Misbehaving guests can cause bus locks to degrade the performance of
the system. The Bus Lock Threshold feature can be used to address this
issue by providing capability to the hypervisor to limit guest's
ability to generate bus lock, thereby preventing system slowdown due
to performance penalities.
When the Bus Lock Threshold feature is enabled, the processor checks
the bus lock threshold count before executing the buslock and decides
whether to trigger bus lock exit or not.
The value of the bus lock threshold count '0' generates bus lock
exits, and if the value is greater than '0', the bus lock is executed
successfully and the bus lock threshold count is decremented.
Presence of the Bus Lock threshold feature is indicated via CPUID
function 0x8000000A_EDX[29].
Signed-off-by: Manali Shukla <manali.shukla@amd.com>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20250502050346.14274-3-manali.shukla@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Move and rename kvm_pio_request.linear_rip to
kvm_vcpu_arch.cui_linear_rip so that the field can be used by other
userspace exit completion flows that need to take action if and only
if userspace has not modified RIP.
No functional changes intended.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Manali Shukla <manali.shukla@amd.com>
Link: https://lore.kernel.org/r/20250502050346.14274-2-manali.shukla@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
The perf_sample_data_init() has already set the period of sample, so no
need to do it again.
Signed-off-by: Changbin Du <changbin.du@huawei.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250506094907.2724-1-changbin.du@huawei.com
Resctrl is a filesystem interface to hardware that provides cache
allocation policy and bandwidth control for groups of tasks or CPUs.
To support more than one architecture, resctrl needs to live in /fs/.
Move the code that is concerned with the filesystem interface to
/fs/resctrl.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250515165855.31452-25-james.morse@arm.com
x86 has an array, rdt_resources_all[], of all possible resources.
The for-each-resource walkers depend on the rid field of all
resources being initialised.
If the array ever grows due to another architecture adding a resource
type that is not defined on x86, the for-each-resources walkers will
loop forever.
Initialise all the rid values in resctrl_arch_late_init() before
any for-each-resource walker can be called.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250515165855.31452-24-james.morse@arm.com
checkpatch.pl identifies some direct #includes of asm headers that
can be satisfied by including the corresponding <linux/...> header
instead.
Fix them.
No intentional functional change.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250515165855.31452-23-james.morse@arm.com
rdt_init_fs_context() sizes a typed allocation using an explicit
sizeof(type) expression, which checkpatch.pl complains about.
Since this code is about to be factored out and made generic, this
is a good opportunity to fix the code to size the allocation based
on the target pointer instead, to reduce the chance of future mis-
maintenance.
Fix it.
No functional change.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250515165855.31452-22-james.morse@arm.com
checkpatch.pl complains about some whitespace anomalies in the
resctrl core code.
This doesn't matter, but since this code is about to be factored
out and made generic, this is a good opportunity to fix these
issues and so reduce future checkpatch fuzz.
Fix them.
No functional change.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250515165855.31452-21-james.morse@arm.com
The resctrl pseudo-lock feature allows an architecture to allocate data
into particular cache portions, which are then treated as reserved to
avoid that data ever being evicted. Setting this up is deeply architecture
specific as it involves disabling prefetchers etc. It is not possible
to support this kind of feature on arm64. Risc-V is assumed to be the
same.
The prototypes for the architecture code were added to x86's asm/resctrl.h,
with other architectures able to provide stubs for their architecture. This
forces other architectures to provide identical stubs.
Move the prototypes and stubs to linux/resctrl.h, and switch between them
using the existing Kconfig symbol.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250515165855.31452-20-james.morse@arm.com
resctrl_arch_mon_ctx_alloc() and resctrl_arch_mon_ctx_free() take an enum
resctrl_event_id that is already defined in resctrl_types.h to be
accessible to asm/resctrl.h.
The x86 stubs take an int. Fix that.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250515165855.31452-19-james.morse@arm.com
Once the filesystem parts of resctrl move to fs/resctrl, it cannot rely
on definitions in x86's internal.h.
Move definitions in internal.h that need to be shared between the
filesystem and architecture code to header files that fs/resctrl can
include.
Doing this separately means the filesystem code only moves between files
of the same name, instead of having these changes mixed in too.
Co-developed-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250515165855.31452-17-james.morse@arm.com
Commit bbeb69ce30 ("x86/mm: Remove CONFIG_HIGHMEM64G support") introduces
a new warning message MSG_HIGHMEM_TRIMMED, which accidentally introduces a
duplicated 'for for' in the warning message.
Remove this duplicated word.
This was noticed while reviewing for references to obsolete kernel build
config options.
Fixes: bbeb69ce30 ("x86/mm: Remove CONFIG_HIGHMEM64G support")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-janitors@vger.kernel.org
Link: https://lore.kernel.org/r/20250516090810.556623-1-lukas.bulwahn@redhat.com
Add Makefile and Kconfig for fs/resctrl. Add ARCH_HAS_CPU_RESCTRL
for the common parts of the resctrl interface and make X86_CPU_RESCTRL
select this.
Adding an include of asm/resctrl.h to linux/resctrl.h allows the
/fs/resctrl files to switch over to using this header instead.
Co-developed-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250515165855.31452-16-james.morse@arm.com
In order to let all the APIs under <cpuid/api.h> have a shared "cpuid_"
namespace, rename hypervisor_cpuid_base() to cpuid_base_hypervisor().
To align with the new style, also rename:
for_each_possible_hypervisor_cpuid_base(function)
to:
for_each_possible_cpuid_base_hypervisor(function)
Adjust call-sites accordingly.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: x86-cpuid@lists.linux.dev
Link: https://lore.kernel.org/r/aCZOi0Oohc7DpgTo@lx-t490
The CPUID(0x2) descriptors iterator has been renamed from:
for_each_leaf_0x2_entry()
to:
for_each_cpuid_0x2_desc()
since it iterates over CPUID(0x2) cache and TLB "descriptors", not
"entries".
In the macro's x86/cpu call-site, rename the parameter denoting the
parsed descriptor at each iteration from 'entry' to 'desc'.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: x86-cpuid@lists.linux.dev
Link: https://lore.kernel.org/r/20250508150240.172915-8-darwi@linutronix.de
The CPUID(0x2) descriptors iterator has been renamed from:
for_each_leaf_0x2_entry()
to:
for_each_cpuid_0x2_desc()
since it iterates over CPUID(0x2) cache and TLB "descriptors", not
"entries".
In the macro's x86/cacheinfo call-site, rename the parameter denoting the
parsed descriptor at each iteration from 'entry' to 'desc'.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: x86-cpuid@lists.linux.dev
Link: https://lore.kernel.org/r/20250508150240.172915-7-darwi@linutronix.de
Rename the CPUID(0x2) register accessor function:
cpuid_get_leaf_0x2_regs(regs)
to:
cpuid_leaf_0x2(regs)
for consistency with other <cpuid/api.h> accessors that return full CPUID
registers outputs like:
cpuid_leaf(regs)
cpuid_subleaf(regs)
In the same vein, rename the CPUID(0x2) iteration macro:
for_each_leaf_0x2_entry()
to:
for_each_cpuid_0x2_desc()
to include "cpuid" in the macro name, and since what is iterated upon is
CPUID(0x2) cache and TLB "descriptos", not "entries". Prefix an
underscore to that iterator macro parameters, so that the newly renamed
'desc' parameter do not get mixed with "union leaf_0x2_regs :: desc[]" in
the macro's implementation.
Adjust all the affected call-sites accordingly.
While at it, use "CPUID(0x2)" instead of "CPUID leaf 0x2" as this is the
recommended style.
No change in functionality intended.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: x86-cpuid@lists.linux.dev
Link: https://lore.kernel.org/r/20250508150240.172915-6-darwi@linutronix.de
trace.h contains all the tracepoints. After the move to /fs/resctrl, some
of these will be left behind. All the pseudo_lock tracepoints remain part
of the architecture. The lone tracepoint in monitor.c moves to /fs/resctrl.
Split trace.h so that each C file includes a different trace header file.
This means the trace header files are not modified when they are moved.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250515165855.31452-14-james.morse@arm.com
MPAM platforms retrieve the cache-id property from the ACPI PPTT table.
The cache-id field is 32 bits wide. Under resctrl, the cache-id becomes
the domain-id, and is packed into the mon_data_bits union bitfield.
The width of cache-id in this field is 14 bits.
Expanding the union would break 32bit x86 platforms as this union is
stored as the kernfs kn->priv pointer. This saved allocating memory
for the priv data storage.
The firmware on MPAM platforms have used the PPTT cache-id field to
expose the interconnect's id for the cache, which is sparse and uses
more than 14 bits. Use of this id is to enable PCIe direct cache
injection hints. Using this feature with VFIO means the value provided
by the ACPI table should be exposed to user-space.
To support cache-id values greater than 14 bits, convert the
mon_data_bits union to a structure. These are shared between control
and monitor groups, and are allocated on first use. The list of
allocated struct mon_data is free'd when the filesystem is umount()ed.
Co-developed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250515165855.31452-13-james.morse@arm.com
The resctrl_event_id enum gives names to the counter event numbers on x86.
These are used directly by resctrl.
To allow the MPAM driver to keep an array of these the size of the enum
needs to be known.
Add a 'num_events' enum entry which can be used to size an array. This is
added to the enum to reduce conflicts with another series, which in turn
requires get_arch_mbm_state() to have a default case.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250515165855.31452-12-james.morse@arm.com
Page fault tracepoints are interesting for other architectures as well.
Move them to be generic.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: linux-trace-kernel@vger.kernel.org
Link: https://lore.kernel.org/r/89c2f284adf9b4c933f0e65811c50cef900a5a95.1747046848.git.namcao@linutronix.de
trace_pagefault_key is used to optimize the pagefault tracepoints when it
is disabled. However, tracepoints already have built-in static_key for this
exact purpose.
Remove this redundant key.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: linux-trace-kernel@vger.kernel.org
Link: https://lore.kernel.org/r/827c7666d2989f08742a4fb869b1ed5bfaaf1dbf.1747046848.git.namcao@linutronix.de
is_mba_sc() is defined in core.c, but has no callers there. It does not access
any architecture private structures.
Move this to rdtgroup.c where the majority of callers are. This makes the move
of the filesystem code to /fs/ cleaner.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250515165855.31452-11-james.morse@arm.com
Because ARM's MPAM controls are probed using MMIO, resctrl can't be
initialised until enough CPUs are online to have determined the system-wide
supported num_closid. Arm64 also supports 'late onlined secondaries', where
only a subset of CPUs are online during boot.
These two combine to mean the MPAM driver may not be able to initialise
resctrl until user-space has brought 'enough' CPUs online.
To allow MPAM to initialise resctrl after __init text has been free'd, remove
all the __init markings from resctrl.
The existing __exit markings cause these functions to be removed by the linker
as it has never been possible to build resctrl as a module. MPAM has an error
interrupt which causes the driver to reset and disable itself. Remove the
__exit markings to allow the MPAM driver to tear down resctrl when an error
occurs.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250515165855.31452-10-james.morse@arm.com
resctrl_exit() was intended for use when the 'resctrl' module was unloaded.
resctrl can't be built as a module, and the kernfs helpers are not exported so
this is unlikely to change. MPAM has an error interrupt which indicates the
MPAM driver has gone haywire. Should this occur tasks could run with the wrong
control values, leading to bad performance for important tasks. In this
scenario the MPAM driver will reset the hardware, but it needs a way to tell
resctrl that no further configuration should be attempted.
In particular, moving tasks between control or monitor groups does not
interact with the architecture code, so there is no opportunity for the arch
code to indicate that the hardware is no-longer functioning.
Using resctrl_exit() for this leaves the system in a funny state as resctrl is
still mounted, but cannot be un-mounted because the sysfs directory that is
typically used has been removed. Dave Martin suggests this may cause systemd
trouble in the future as not all filesystems can be unmounted.
Add calls to remove all the files and directories in resctrl, and remove the
sysfs_remove_mount_point() call that leaves the system in a funny state. When
triggered, this causes all the resctrl files to disappear. resctrl can be
unmounted, but not mounted again.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250515165855.31452-9-james.morse@arm.com
resctrl_exit() removes things like the resctrl mount point directory
and unregisters the filesystem prior to freeing data structures that
were allocated during resctrl_init().
This assumes that there are no online domains when resctrl_exit() is
called. If any domain were online, the limbo or overflow handler could
be scheduled to run.
Add a check for any online control or monitor domains, and document that
the architecture code is required to offline all monitor and control
domains before calling resctrl_exit().
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250515165855.31452-8-james.morse@arm.com
resctrl_sched_in() loads the architecture specific CPU MSRs with the
CLOSID and RMID values. This function was named before resctrl was
split to have architecture specific code, and generic filesystem code.
This function is obviously architecture specific, but does not begin
with 'resctrl_arch_', making it the odd one out in the functions an
architecture needs to support to enable resctrl.
Rename it for consistency. This is purely cosmetic.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250515165855.31452-7-james.morse@arm.com
Resctrl allocates and finds free CLOSID values using the bits of a u32.
This restricts the number of control groups that can be created by
user-space.
MPAM has an architectural limit of 2^16 CLOSID values, Intel x86 could
be extended beyond 32 values. There is at least one MPAM platform which
supports more than 32 CLOSID values.
Replace the fixed size bitmap with calls to the bitmap API to allocate
an array of a sufficient size.
ffs() returns '1' for bit 0, hence the existing code subtracts 1 from
the index to get the CLOSID value. find_first_bit() returns the bit
number which does not need adjusting.
[ morse: fixed the off-by-one in the allocator and the wrong not-found
value. Removed the limit. Rephrase the commit message. ]
Signed-off-by: Amit Singh Tomar <amitsinght@marvell.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250515165855.31452-6-james.morse@arm.com
With the lack of cpumask_any_andnot_but(), cpumask_any_housekeeping()
has to abuse cpumask_nth() functions.
Update cpumask_any_housekeeping() to use the new cpumask_any_but()
and cpumask_any_andnot_but(). These two functions understand
RESCTRL_PICK_ANY_CPU, which simplifies cpumask_any_housekeeping()
significantly.
Signed-off-by: Yury Norov [NVIDIA] <yury.norov@gmail.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: James Morse <james.morse@arm.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: James Morse <james.morse@arm.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250515165855.31452-5-james.morse@arm.com
TL;DR: SGX page reclaim touches the page to copy its contents to
secondary storage. SGX instructions do not gracefully handle machine
checks. Despite this, the existing SGX code will try to reclaim pages
that it _knows_ are poisoned. Avoid even trying to reclaim poisoned pages.
The longer story:
Pages used by an enclave only get epc_page->poison set in
arch_memory_failure() but they currently stay on sgx_active_page_list until
sgx_encl_release(), with the SGX_EPC_PAGE_RECLAIMER_TRACKED flag untouched.
epc_page->poison is not checked in the reclaimer logic meaning that, if other
conditions are met, an attempt will be made to reclaim an EPC page that was
poisoned. This is bad because 1. we don't want that page to end up added
to another enclave and 2. it is likely to cause one core to shut down
and the kernel to panic.
Specifically, reclaiming uses microcode operations including "EWB" which
accesses the EPC page contents to encrypt and write them out to non-SGX
memory. Those operations cannot handle MCEs in their accesses other than
by putting the executing core into a special shutdown state (affecting
both threads with HT.) The kernel will subsequently panic on the
remaining cores seeing the core didn't enter MCE handler(s) in time.
Call sgx_unmark_page_reclaimable() to remove the affected EPC page from
sgx_active_page_list on memory error to stop it being considered for
reclaiming.
Testing epc_page->poison in sgx_reclaim_pages() would also work but I assume
it's better to add code in the less likely paths.
The affected EPC page is not added to &node->sgx_poison_page_list until
later in sgx_encl_release()->sgx_free_epc_page() when it is EREMOVEd.
Membership on other lists doesn't change to avoid changing any of the
lists' semantics except for sgx_active_page_list. There's a "TBD" comment
in arch_memory_failure() about pre-emptive actions, the goal here is not
to address everything that it may imply.
This also doesn't completely close the time window when a memory error
notification will be fatal (for a not previously poisoned EPC page) --
the MCE can happen after sgx_reclaim_pages() has selected its candidates
or even *inside* a microcode operation (actually easy to trigger due to
the amount of time spent in them.)
The spinlock in sgx_unmark_page_reclaimable() is safe because
memory_failure() runs in process context and no spinlocks are held,
explicitly noted in a mm/memory-failure.c comment.
Signed-off-by: Andrew Zaborowski <andrew.zaborowski@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: balrogg@gmail.com
Cc: linux-sgx@vger.kernel.org
Link: https://lore.kernel.org/r/20250508230429.456271-1-andrew.zaborowski@intel.com
In order to let all the APIs under <cpuid/api.h> have a shared "cpuid_"
namespace, rename have_cpuid_p() to cpuid_feature().
Adjust all call-sites accordingly.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: x86-cpuid@lists.linux.dev
Link: https://lore.kernel.org/r/20250508150240.172915-4-darwi@linutronix.de
The main CPUID header <asm/cpuid.h> was originally a storefront for the
headers:
<asm/cpuid/api.h>
<asm/cpuid/leaf_0x2_api.h>
Now that the latter CPUID(0x2) header has been merged into the former,
there is no practical difference between <asm/cpuid.h> and
<asm/cpuid/api.h>.
Migrate all users to the <asm/cpuid/api.h> header, in preparation of
the removal of <asm/cpuid.h>.
Don't remove <asm/cpuid.h> just yet, in case some new code in -next
started using it.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: x86-cpuid@lists.linux.dev
Link: https://lore.kernel.org/r/20250508150240.172915-3-darwi@linutronix.de
Move all of the CPUID(0x2) APIs at <cpuid/leaf_0x2_api.h> into
<cpuid/api.h>, in order centralize all CPUID APIs into the latter.
While at it, separate the different CPUID leaf parsing APIs using
header comments like "CPUID(0xN) parsing: ".
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: x86-cpuid@lists.linux.dev
Link: https://lore.kernel.org/r/20250508150240.172915-2-darwi@linutronix.de
Currently, using PEBS-via-PT with a sample frequency instead of a sample
period, causes a segfault. For example:
BUG: kernel NULL pointer dereference, address: 0000000000000195
<NMI>
? __die_body.cold+0x19/0x27
? page_fault_oops+0xca/0x290
? exc_page_fault+0x7e/0x1b0
? asm_exc_page_fault+0x26/0x30
? intel_pmu_pebs_event_update_no_drain+0x40/0x60
? intel_pmu_pebs_event_update_no_drain+0x32/0x60
intel_pmu_drain_pebs_icl+0x333/0x350
handle_pmi_common+0x272/0x3c0
intel_pmu_handle_irq+0x10a/0x2e0
perf_event_nmi_handler+0x2a/0x50
That happens because intel_pmu_pebs_event_update_no_drain() assumes all the
pebs_enabled bits represent counter indexes, which is not always the case.
In this particular case, bits 60 and 61 are set for PEBS-via-PT purposes.
The behaviour of PEBS-via-PT with sample frequency is questionable because
although a PMI is generated (PEBS_PMI_AFTER_EACH_RECORD), the period is not
adjusted anyway.
Putting that aside, fix intel_pmu_pebs_event_update_no_drain() by passing
the mask of counter bits instead of 'size'. Note, prior to the Fixes
commit, 'size' would be limited to the maximum counter index, so the issue
was not hit.
Fixes: 722e42e45c ("perf/x86: Support counter mask")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: linux-perf-users@vger.kernel.org
Link: https://lore.kernel.org/r/20250508134452.73960-1-adrian.hunter@intel.com
perf always allocates contiguous AUX pages based on aux_watermark.
However, this contiguous allocation doesn't benefit all PMUs. For
instance, ARM SPE and TRBE operate with virtual pages, and Coresight
ETR allocates a separate buffer. For these PMUs, allocating contiguous
AUX pages unnecessarily exacerbates memory fragmentation. This
fragmentation can prevent their use on long-running devices.
This patch modifies the perf driver to be memory-friendly by default,
by allocating non-contiguous AUX pages. For PMUs requiring contiguous
pages (Intel BTS and some Intel PT), the existing
PERF_PMU_CAP_AUX_NO_SG capability can be used. For PMUs that don't
require but can benefit from contiguous pages (some Intel PT), a new
capability, PERF_PMU_CAP_AUX_PREFER_LARGE, is added to maintain their
existing behavior.
Signed-off-by: Yabin Cui <yabinc@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: James Clark <james.clark@linaro.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20250508232642.148767-1-yabinc@google.com
Add a simple rdmsrl_on_cpu() compatibility wrapper for
rdmsrq_on_cpu(), to make life in -next easier, where
the PM tree recently grew more uses of the old API.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Mario Limonciello <mario.limonciello@amd.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Xin Li <xin@zytor.com>
Link: https://lore.kernel.org/r/20250512145517.6e0666e3@canb.auug.org.au
So 'make W=1' complains about a couple of kernel-doc descriptions
in our MM primitives in pgtable.c:
arch/x86/mm/pgtable.c:623: warning: Function parameter or struct member 'reserve' not described in 'reserve_top_address'
arch/x86/mm/pgtable.c:672: warning: Function parameter or struct member 'p4d' not described in 'p4d_set_huge'
arch/x86/mm/pgtable.c:672: warning: Function parameter or struct member 'addr' not described in 'p4d_set_huge'
... so on
Fix them all up, add missing parameter documentation, and fix various spelling
inconsistencies while at it.
[ mingo: Harmonize kernel-doc annotations some more. ]
Signed-off-by: Shivank Garg <shivankg@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Link: https://lore.kernel.org/r/20250514062637.3287779-1-shivankg@amd.com
Expose certain 'struct cpuinfo_x86' fields via asm-offsets for x86_64
too, so that it will be possible to set CPU capabilities from 64-bit
asm code.
32-bit already used these fields, so simply move those offset exports into
the unified asm-offsets.c file.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250514104242.1275040-12-ardb+git@google.com
The global pseudo-constants 'page_offset_base', 'vmalloc_base' and
'vmemmap_base' are not used extremely early during the boot, and cannot be
used safely until after the KASLR memory randomization code in
kernel_randomize_memory() executes, which may update their values.
So there is no point in setting these variables extremely early, and it
can wait until after the kernel itself is mapped and running from its
permanent virtual mapping.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250513111157.717727-9-ardb+git@google.com
Warnings generated with 'make W=1':
arch/x86/power/hibernate.c:47: warning: Function parameter or struct member 'pfn' not described in 'pfn_is_nosave'
arch/x86/power/hibernate.c:92: warning: Function parameter or struct member 'max_size' not described in 'arch_hibernation_header_save'
Add missing parameter documentation in hibernate functions to
fix kernel-doc warnings.
Signed-off-by: Shivank Garg <shivankg@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20250514062637.3287779-2-shivankg@amd.com
Building the kernel with W=1 generates the following warning:
arch/x86/mm/pat/memtype.c:692: warning: Function parameter or struct member 'pfn' not described in 'pat_pfn_immune_to_uc_mtrr'
Add missing parameter documentation to fix the kernel-doc warning.
Signed-off-by: Shivank Garg <shivankg@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250514062637.3287779-3-shivankg@amd.com
Fix several build errors when CONFIG_MODULES=n, including the following:
../arch/x86/kernel/alternative.c:195:25: error: incomplete definition of type 'struct module'
195 | for (int i = 0; i < mod->its_num_pages; i++) {
Fixes: 872df34d7c ("x86/its: Use dynamic thunks for indirect branches")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Tested-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a synthetic feature flag for Zen6.
[ bp: Move the feature flag to a free slot and avoid future merge
conflicts from incoming stuff. ]
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250513204857.3376577-1-yazen.ghannam@amd.com
1f4bb068b4 ("x86/bugs: Restructure SRSO mitigation") does this:
if (boot_cpu_data.x86 < 0x19 && !cpu_smt_possible()) {
setup_force_cpu_cap(X86_FEATURE_SRSO_NO);
srso_mitigation = SRSO_MITIGATION_NONE;
return;
}
and, in particular, sets srso_mitigation to NONE. This leads to
reporting
Speculative Return Stack Overflow: Vulnerable
on Zen2 machines.
There's a far bigger confusion with what SRSO_NO means and how it is
used in the code but this will be a matter of future fixes and
restructuring to how the SRSO mitigation gets determined.
Fix the reporting issue for now.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: David Kaplan <david.kaplan@amd.com>
Link: https://lore.kernel.org/20250513110405.15872-1-bp@kernel.org
When shared pages are being converted to private during kdump, additional
checks are performed. They include handling the case of a GHCB page being
contained within a huge page.
Currently, this check incorrectly skips a page just below the GHCB page from
being transitioned back to private during kdump preparation.
This skipped page causes a 0x404 #VC exception when it is accessed later while
dumping guest memory for vmcore generation.
Correct the range to be checked for GHCB contained in a huge page. Also,
ensure that the skipped huge page containing the GHCB page is transitioned
back to private by applying the correct address mask later when changing GHCBs
to private at end of kdump preparation.
[ bp: Massage commit message. ]
Fixes: 3074152e56 ("x86/sev: Convert shared memory back to private on kexec")
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Tested-by: Srikanth Aithal <sraithal@amd.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20250506183529.289549-1-Ashish.Kalra@amd.com
When kdump is running makedumpfile to generate vmcore and dump SNP guest
memory it touches the VMSA page of the vCPU executing kdump.
It then results in unrecoverable #NPF/RMP faults as the VMSA page is
marked busy/in-use when the vCPU is running and subsequently a causes
guest softlockup/hang.
Additionally, other APs may be halted in guest mode and their VMSA pages
are marked busy and touching these VMSA pages during guest memory dump
will also cause #NPF.
Issue AP_DESTROY GHCB calls on other APs to ensure they are kicked out
of guest mode and then clear the VMSA bit on their VMSA pages.
If the vCPU running kdump is an AP, mark it's VMSA page as offline to
ensure that makedumpfile excludes that page while dumping guest memory.
Fixes: 3074152e56 ("x86/sev: Convert shared memory back to private on kexec")
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Tested-by: Srikanth Aithal <sraithal@amd.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20250428214151.155464-1-Ashish.Kalra@amd.com
Introduce pm_suspend_in_progress() to be used for checking if a system-
wide suspend or resume transition is in progress, instead of comparing
pm_suspend_target_state directly to PM_SUSPEND_ON, and use it where
applicable.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/2020901.PYKUYFuaPT@rjwysocki.net
Prepare to resolve conflicts with an upstream series of fixes that conflict
with pending x86 changes:
6f5bf947ba Merge tag 'its-for-linus-20250509' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Prepare to resolve conflicts with an upstream series of fixes that conflict
with pending x86 changes:
6f5bf947ba Merge tag 'its-for-linus-20250509' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Prepare to resolve conflicts with an upstream series of fixes that conflict
with pending x86 changes:
6f5bf947ba Merge tag 'its-for-linus-20250509' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Prepare to resolve conflicts with an upstream series of fixes that conflict
with pending x86 changes:
6f5bf947ba Merge tag 'its-for-linus-20250509' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Prepare to resolve conflicts with an upstream series of fixes that conflict
with pending x86 changes:
6f5bf947ba Merge tag 'its-for-linus-20250509' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Prepare to resolve conflicts with an upstream series of fixes that conflict
with pending x86 changes:
6f5bf947ba Merge tag 'its-for-linus-20250509' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Prepare to resolve conflicts with an upstream series of fixes that conflict
with pending x86 changes:
6f5bf947ba Merge tag 'its-for-linus-20250509' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Prepare to resolve conflicts with an upstream series of fixes that conflict
with pending x86 changes:
6f5bf947ba Merge tag 'its-for-linus-20250509' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Instead of calling pfn_valid() separately for every single PFN in the
range, use for_each_valid_pfn() and only look at the ones which are.
Link: https://lkml.kernel.org/r/20250423133821.789413-6-dwmw2@infradead.org
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Marc Rutland <mark.rutland@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Ruihan Li <lrh2000@pku.edu.cn>
Cc: Will Deacon <will@kernel.org>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
During kexec handover (KHO) memory contains data that should be preserved
and this data would be consumed by kexec'ed kernel.
To make sure that the preserved memory is not overwritten, KHO uses
"scratch regions" to bootstrap kexec'ed kernel. These regions are
guaranteed to not have any memory that KHO would preserve and are used as
the only memory the kernel sees during the early boot.
The scratch regions are passed in the setup_data by the first kernel with
other KHO parameters. If the setup_data contains the KHO parameters,
limit randomization to scratch areas only to make sure preserved memory
won't get overwritten.
Since all the pointers in setup_data are represented by u64, they require
double casting (first to unsigned long and then to the actual pointer
type) to compile on 32-bits. This looks goofy out of context, but it is
unfortunately the way that this is handled across the tree. There are at
least a dozen instances of casting like this.
Link: https://lkml.kernel.org/r/20250509074635.3187114-14-changyuanl@google.com
Signed-off-by: Alexander Graf <graf@amazon.com>
Co-developed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Co-developed-by: Changyuan Lyu <changyuanl@google.com>
Signed-off-by: Changyuan Lyu <changyuanl@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Anthony Yznaga <anthony.yznaga@oracle.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Ashish Kalra <ashish.kalra@amd.com>
Cc: Ben Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Gowans <jgowans@amazon.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Marc Rutland <mark.rutland@arm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Pratyush Yadav <ptyadav@amazon.de>
Cc: Rob Herring <robh@kernel.org>
Cc: Saravana Kannan <saravanak@google.com>
Cc: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Thomas Lendacky <thomas.lendacky@amd.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
KHO kernels are special and use only scratch memory for memblock
allocations, but memory below 1M is ignored by kernel after early boot and
cannot be naturally marked as scratch.
To allow allocation of the real-mode trampoline and a few (if any) other
very early allocations from below 1M forcibly mark the memory below 1M as
scratch.
After real mode trampoline is allocated, clear that scratch marking.
Link: https://lkml.kernel.org/r/20250509074635.3187114-13-changyuanl@google.com
Signed-off-by: Alexander Graf <graf@amazon.com>
Co-developed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Co-developed-by: Changyuan Lyu <changyuanl@google.com>
Signed-off-by: Changyuan Lyu <changyuanl@google.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Anthony Yznaga <anthony.yznaga@oracle.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Ashish Kalra <ashish.kalra@amd.com>
Cc: Ben Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Gowans <jgowans@amazon.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Marc Rutland <mark.rutland@arm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Pratyush Yadav <ptyadav@amazon.de>
Cc: Rob Herring <robh@kernel.org>
Cc: Saravana Kannan <saravanak@google.com>
Cc: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Thomas Lendacky <thomas.lendacky@amd.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
kexec handover (KHO) creates a metadata that the kernels pass between each
other during kexec. This metadata is stored in memory and kexec image
contains a (physical) pointer to that memory.
In addition, KHO keeps "scratch regions" available for kexec: physically
contiguous memory regions that are guaranteed to not have any memory that
KHO would preserve. The new kernel bootstraps itself using the scratch
regions and sets all handed over memory as in use. When subsystems that
support KHO initialize, they introspect the KHO metadata, restore
preserved memory regions, and retrieve their state stored in the preserved
memory.
Enlighten x86 kexec-file and boot path about the KHO metadata and make
sure it gets passed along to the next kernel.
Link: https://lkml.kernel.org/r/20250509074635.3187114-12-changyuanl@google.com
Signed-off-by: Alexander Graf <graf@amazon.com>
Co-developed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Co-developed-by: Changyuan Lyu <changyuanl@google.com>
Signed-off-by: Changyuan Lyu <changyuanl@google.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Anthony Yznaga <anthony.yznaga@oracle.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Ashish Kalra <ashish.kalra@amd.com>
Cc: Ben Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Gowans <jgowans@amazon.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Marc Rutland <mark.rutland@arm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Pratyush Yadav <ptyadav@amazon.de>
Cc: Rob Herring <robh@kernel.org>
Cc: Saravana Kannan <saravanak@google.com>
Cc: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Thomas Lendacky <thomas.lendacky@amd.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
memblock_reserve() does not distinguish memory used by firmware from
memory used by kernel.
The distinction is nice to have for accounting of early memory allocations
and reservations, but it is essential for kexec handover (kho) to know how
much memory kernel consumes during boot.
Use memblock_reserve_kern() to reserve kernel memory, such as kernel
image, initrd and setup data.
Link: https://lkml.kernel.org/r/20250509074635.3187114-11-changyuanl@google.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Changyuan Lyu <changyuanl@google.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Alexander Graf <graf@amazon.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Anthony Yznaga <anthony.yznaga@oracle.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Ashish Kalra <ashish.kalra@amd.com>
Cc: Ben Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Gowans <jgowans@amazon.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Marc Rutland <mark.rutland@arm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Pratyush Yadav <ptyadav@amazon.de>
Cc: Rob Herring <robh@kernel.org>
Cc: Saravana Kannan <saravanak@google.com>
Cc: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Thomas Lendacky <thomas.lendacky@amd.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The resctrl file system code needs to know how many region tags
are supported. Parse the ACPI MRRM table and save the max_mem_region
value.
Provide a function for resctrl to collect that value.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://patch.msgid.link/20250505173819.419271-2-tony.luck@intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When suspending, save_processor_state() calls mtrr_save_fixed_ranges()
to save fixed-range MTRRs.
On platforms without fixed-range MTRRs like the ACRN hypervisor which
has removed fixed-range MTRR emulation, accessing these MSRs will
trigger an unchecked MSR access error. Make sure fixed-range MTRRs are
supported before access to prevent such error.
Since mtrr_state.have_fixed is only set when MTRRs are present and
enabled, checking the CPU feature flag in mtrr_save_fixed_ranges() is
unnecessary.
Fixes: 3ebad59056 ("[PATCH] x86: Save and restore the fixed-range MTRRs of the BSP when suspending")
Signed-off-by: Jiaqing Zhao <jiaqing.zhao@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250509170633.3411169-2-jiaqing.zhao@linux.intel.com
Add explicit array bounds to the function prototypes for the parameters
that didn't already get handled by the conversion to use chacha_state:
- chacha_block_*():
Change 'u8 *out' or 'u8 *stream' to u8 out[CHACHA_BLOCK_SIZE].
- hchacha_block_*():
Change 'u32 *out' or 'u32 *stream' to u32 out[HCHACHA_OUT_WORDS].
- chacha_init():
Change 'const u32 *key' to 'const u32 key[CHACHA_KEY_WORDS]'.
Change 'const u8 *iv' to 'const u8 iv[CHACHA_IV_SIZE]'.
No functional changes. This just makes it clear when fixed-size arrays
are expected.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The ChaCha state matrix is 16 32-bit words. Currently it is represented
in the code as a raw u32 array, or even just a pointer to u32. This
weak typing is error-prone. Instead, introduce struct chacha_state:
struct chacha_state {
u32 x[16];
};
Convert all ChaCha and HChaCha functions to use struct chacha_state.
No functional changes.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Page table pages are normally freed using the appropriate helper for the
given page table level. On x86, pud_free_pmd_page() and
pmd_free_pte_page() are an exception to the rule: they call free_page()
directly.
Constructor/destructor calls are about to be introduced for kernel PTEs.
To avoid missing dtor calls in those helpers, free the PTE pages using
pte_free_kernel() instead of free_page().
While at it also use pmd_free() instead of calling pagetable_dtor()
explicitly at the PMD level.
Link: https://lkml.kernel.org/r/20250408095222.860601-3-kevin.brodsky@arm.com
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Linus Waleij <linus.walleij@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: <x86@kernel.org>
Cc: Yang Shi <yang@os.amperecomputing.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Always call constructor for kernel page tables", v2.
There has been much confusion around exactly when page table
constructors/destructors (pagetable_*_[cd]tor) are supposed to be called.
They were initially introduced for user PTEs only (to support split page
table locks), then at the PMD level for the same purpose. Accounting was
added later on, starting at the PTE level and then moving to higher levels
(PMD, PUD). Finally, with my earlier series "Account page tables at all
levels" [1], the ctor/dtor is run for all levels, all the way to PGD.
I thought this was the end of the story, and it hopefully is for user
pgtables, but I was wrong for what concerns kernel pgtables. The current
situation there makes very little sense:
* At the PTE level, the ctor/dtor is not called (at least in the generic
implementation). Specific helpers are used for kernel pgtables at this
level (pte_{alloc,free}_kernel()) and those have never called the
ctor/dtor, most likely because they were initially irrelevant in the
kernel case.
* At all other levels, the ctor/dtor is normally called. This is
potentially wasteful at the PMD level (more on that later).
This series aims to ensure that the ctor/dtor is always called for kernel
pgtables, as it already is for user pgtables. Besides consistency, the
main motivation is to guarantee that ctor/dtor hooks are systematically
called; this makes it possible to insert hooks to protect page tables [2],
for instance. There is however an extra challenge: split locks are not
used for kernel pgtables, and it would therefore be wasteful to initialise
them (ptlock_init()).
It is worth clarifying exactly when split locks are used. They clearly
are for user pgtables, but as illustrated in commit 61444cde91 ("ARM:
8591/1: mm: use fully constructed struct pages for EFI pgd allocations"),
they also are for special page tables like efi_mm. The one case where
split locks are definitely unused is pgtables owned by init_mm; this is
consistent with the behaviour of apply_to_pte_range().
The approach chosen in this series is therefore to pass the mm associated
to the pgtables being constructed to pagetable_{pte,pmd}_ctor() (patch 1),
and skip ptlock_init() if mm == &init_mm (patch 3 and 7). This makes it
possible to call the PTE ctor/dtor from pte_{alloc,free}_kernel() without
unintended consequences (patch 3). As a result the accounting functions
are now called at all levels for kernel pgtables, and split locks are
never initialised.
In configurations where ptlocks are dynamically allocated (32-bit,
PREEMPT_RT, etc.) and ARCH_ENABLE_SPLIT_PMD_PTLOCK is selected, this
series results in the removal of a kmem_cache allocation for every kernel
PMD. Additionally, for certain architectures that do not use
<asm-generic/pgalloc.h> such as s390, the same optimisation occurs at the
PTE level.
===
Things get more complicated when it comes to special pgtable allocators
(patch 8-12). All architectures need such allocators to create initial
kernel pgtables; we are not concerned with those as the ctor cannot be
called so early in the boot sequence. However, those allocators may also
be used later in the boot sequence or during normal operations. There are
two main use-cases:
1. Mapping EFI memory: efi_mm (arm, arm64, riscv)
2. arch_add_memory(): init_mm
The ctor is already explicitly run (at the PTE/PMD level) in the first
case, as required for pgtables that are not associated with init_mm.
However the same allocators may also be used for the second use-case (or
others), and this is where it gets messy. Patch 1 calls the ctor with
NULL as mm in those situations, as the actual mm isn't available.
Practically this means that ptlocks will be unconditionally initialised.
This is fine on arm - create_mapping_late() is only used for the EFI
mapping. On arm64, __create_pgd_mapping() is also used by
arch_add_memory(); patch 8/9/11 ensure that ctors are called at all levels
with the appropriate mm. The situation is similar on riscv, but
propagating the mm down to the ctor would require significant refactoring.
Since they are already called unconditionally, this series leaves riscv
no worse off - patch 10 adds comments to clarify the situation.
From a cursory look at other architectures implementing arch_add_memory(),
s390 and x86 may also need a similar treatment to add constructor calls.
This is to be taken care of in a future version or as a follow-up.
===
The complications in those special pgtable allocators beg the question:
does it really make sense to treat efi_mm and init_mm differently in e.g.
apply_to_pte_range()? Maybe what we really need is a way to tell if an mm
corresponds to user memory or not, and never use split locks for non-user
mm's. Feedback and suggestions welcome!
This patch (of 12):
In preparation for calling constructors for all kernel page tables while
eliding unnecessary ptlock initialisation, let's pass down the associated
mm to the PTE/PMD level ctors. (These are the two levels where ptlocks
are used.)
In most cases the mm is already around at the point of calling the ctor so
we simply pass it down. This is however not the case for special page
table allocators:
* arch/arm/mm/mmu.c
* arch/arm64/mm/mmu.c
* arch/riscv/mm/init.c
In those cases, the page tables being allocated are either for standard
kernel memory (init_mm) or special page directories, which may not be
associated to any mm. For now let's pass NULL as mm; this will be refined
where possible in future patches.
No functional change in this patch.
Link: https://lore.kernel.org/linux-mm/20250103184415.2744423-1-kevin.brodsky@arm.com/ [1]
Link: https://lore.kernel.org/linux-hardening/20250203101839.1223008-1-kevin.brodsky@arm.com/ [2]
Link: https://lkml.kernel.org/r/20250408095222.860601-1-kevin.brodsky@arm.com
Link: https://lkml.kernel.org/r/20250408095222.860601-2-kevin.brodsky@arm.com
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> [s390]
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Linus Waleij <linus.walleij@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Shi <yang@os.amperecomputing.com>
Cc: <x86@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Last argument in effective_prot() is u64 assuming pxd_val() returned value
(all page table levels) is 64 bit. pxd_val() is very platform specific
and its type should not be assumed in generic MM.
Split effective_prot() into individual page table level specific callbacks
which accepts corresponding pxd_t argument instead and then the
subscribing platform (only x86) just derive pxd_val() from the entries as
required and proceed as earlier.
Link: https://lkml.kernel.org/r/20250407053113.746295-3-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/ptdump: Drop assumption that pxd_val() is u64", v2.
Last argument passed down in note_page() is u64 assuming pxd_val()
returned value (all page table levels) is 64 bit - which might not be the
case going ahead when D128 page tables is enabled on arm64 platform.
Besides pxd_val() is very platform specific and its type should not be
assumed in generic MM. A similar problem exists for effective_prot(),
although it is restricted to x86 platform.
This series splits note_page() and effective_prot() into individual page
table level specific callbacks which accepts corresponding pxd_t page
table entry as an argument instead and later on all subscribing platforms
could derive pxd_val() from the table entries as required and proceed as
before.
Define ptdesc_t type which describes the basic page table descriptor
layout on arm64 platform. Subsequently all level specific pxxval_t
descriptors are derived from ptdesc_t thus establishing a common original
format, which can also be appropriate for page table entries, masks and
protection values etc which are used at all page table levels.
This patch (of 3):
Last argument passed down in note_page() is u64 assuming pxd_val()
returned value (all page table levels) is 64 bit - which might not be the
case going ahead when D128 page tables is enabled on arm64 platform.
Besides pxd_val() is very platform specific and its type should not be
assumed in generic MM.
Split note_page() into individual page table level specific callbacks
which accepts corresponding pxd_t argument instead and then subscribing
platforms just derive pxd_val() from the entries as required and proceed
as earlier.
Also add a note_page_flush() callback for flushing the last page table
page that was being handled earlier via level = -1.
Link: https://lkml.kernel.org/r/20250407053113.746295-1-anshuman.khandual@arm.com
Link: https://lkml.kernel.org/r/20250407053113.746295-2-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Systems with hotplug may provide an advisement value on what the memblock
size should be. Probe this value when the rest of the configuration
values are considered.
The new heuristic is as follows
1) set_memory_block_size_order value if already set (cmdline param)
2) minimum block size if memory is less than large block limit
3) if no hotplug advice: Max block size if system is bare-metal,
otherwise use end of memory alignment.
4) if hotplug advice: lesser of advice and end of memory alignment.
Convert to cpu_feature_enabled() while at it.[1]
[1] https://lore.kernel.org/all/20241031103401.GBZyNdGQ-ZyXKyzC_z@fat_crate.local/
Link: https://lkml.kernel.org/r/20250127153405.3379117-3-gourry@gourry.net
Signed-off-by: Gregory Price <gourry@gourry.net>
Suggested-by: Borislav Petkov <bp@alien8.de>
Suggested-by: David Hildenbrand <david@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Oscar Salvador <osalvador@suse.de>
Cc: Alison Schofield <alison.schofield@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Bruno Faccini <bfaccini@nvidia.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Haibo Xu <haibo1.xu@intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joanthan Cameron <Jonathan.Cameron@huawei.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Robert Richter <rrichter@amd.com>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There are now no callers of mk_huge_pmd() and mk_pmd(). Remove them.
Link: https://lkml.kernel.org/r/20250402181709.2386022-12-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Richard Weinberger <richard@nod.at>
Cc: <x86@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Move the shadow stack check to pfn_pte() which lets us use the common
definition of mk_pte().
Link: https://lkml.kernel.org/r/20250402181709.2386022-5-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Richard Weinberger <richard@nod.at>
Cc: <x86@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=UVgZ
-----END PGP SIGNATURE-----
Merge tag 'its-for-linus-20250509' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 ITS mitigation from Dave Hansen:
"Mitigate Indirect Target Selection (ITS) issue.
I'd describe this one as a good old CPU bug where the behavior is
_obviously_ wrong, but since it just results in bad predictions it
wasn't wrong enough to notice. Well, the researchers noticed and also
realized that thus bug undermined a bunch of existing indirect branch
mitigations.
Thus the unusually wide impact on this one. Details:
ITS is a bug in some Intel CPUs that affects indirect branches
including RETs in the first half of a cacheline. Due to ITS such
branches may get wrongly predicted to a target of (direct or indirect)
branch that is located in the second half of a cacheline. Researchers
at VUSec found this behavior and reported to Intel.
Affected processors:
- Cascade Lake, Cooper Lake, Whiskey Lake V, Coffee Lake R, Comet
Lake, Ice Lake, Tiger Lake and Rocket Lake.
Scope of impact:
- Guest/host isolation:
When eIBRS is used for guest/host isolation, the indirect branches
in the VMM may still be predicted with targets corresponding to
direct branches in the guest.
- Intra-mode using cBPF:
cBPF can be used to poison the branch history to exploit ITS.
Realigning the indirect branches and RETs mitigates this attack
vector.
- User/kernel:
With eIBRS enabled user/kernel isolation is *not* impacted by ITS.
- Indirect Branch Prediction Barrier (IBPB):
Due to this bug indirect branches may be predicted with targets
corresponding to direct branches which were executed prior to IBPB.
This will be fixed in the microcode.
Mitigation:
As indirect branches in the first half of cacheline are affected, the
mitigation is to replace those indirect branches with a call to thunk that
is aligned to the second half of the cacheline.
RETs that take prediction from RSB are not affected, but they may be
affected by RSB-underflow condition. So, RETs in the first half of
cacheline are also patched to a return thunk that executes the RET aligned
to second half of cacheline"
* tag 'its-for-linus-20250509' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftest/x86/bugs: Add selftests for ITS
x86/its: FineIBT-paranoid vs ITS
x86/its: Use dynamic thunks for indirect branches
x86/ibt: Keep IBT disabled during alternative patching
mm/execmem: Unify early execmem_cache behaviour
x86/its: Align RETs in BHB clear sequence to avoid thunking
x86/its: Add support for RSB stuffing mitigation
x86/its: Add "vmexit" option to skip mitigation on some CPUs
x86/its: Enable Indirect Target Selection mitigation
x86/its: Add support for ITS-safe return thunk
x86/its: Add support for ITS-safe indirect thunk
x86/its: Enumerate Indirect Target Selection (ITS) bug
Documentation: x86/bugs/its: Add ITS documentation
programs
-----BEGIN PGP SIGNATURE-----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=b2Ix
-----END PGP SIGNATURE-----
Merge tag 'ibti-hisory-for-linus-2025-05-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 IBTI mitigation from Dave Hansen:
"Mitigate Intra-mode Branch History Injection via classic BFP programs
This adds the branch history clearing mitigation to cBPF programs for
x86. Intra-mode BHI attacks via cBPF a.k.a IBTI-History was reported
by researchers at VUSec.
For hardware that doesn't support BHI_DIS_S, the recommended
mitigation is to run the short software sequence followed by the IBHF
instruction after cBPF execution. On hardware that does support
BHI_DIS_S, enable BHI_DIS_S and execute the IBHF after cBPF execution.
The Indirect Branch History Fence (IBHF) is a new instruction that
prevents indirect branch target predictions after the barrier from
using branch history from before the barrier while BHI_DIS_S is
enabled. On older systems this will map to a NOP. It is recommended to
add this fence at the end of the cBPF program to support VM migration.
This instruction is required on newer parts with BHI_NO to fully
mitigate against these attacks.
The current code disables the mitigation for anything running with the
SYS_ADMIN capability bit set. The intention was not to waste time
mitigating a process that has access to anything it wants anyway"
* tag 'ibti-hisory-for-linus-2025-05-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bhi: Do not set BHI_DIS_S in 32-bit mode
x86/bpf: Add IBHF call at end of classic BPF
x86/bpf: Call branch history clearing sequence on exit
* Avoid use of uninitialized memcache pointer in user_mem_abort()
* Always set HCR_EL2.xMO bits when running in VHE, allowing interrupts
to be taken while TGE=0 and fixing an ugly bug on AmpereOne that
occurs when taking an interrupt while clearing the xMO bits
(AC03_CPU_36)
* Prevent VMMs from hiding support for AArch64 at any EL virtualized by
KVM
* Save/restore the host value for HCRX_EL2 instead of restoring an
incorrect fixed value
* Make host_stage2_set_owner_locked() check that the entire requested
range is memory rather than just the first page
RISC-V:
* Add missing reset of smstateen CSRs
x86:
* Forcibly leave SMM on SHUTDOWN interception on AMD CPUs to avoid causing
problems due to KVM stuffing INIT on SHUTDOWN (KVM needs to sanitize the
VMCB as its state is undefined after SHUTDOWN, emulating INIT is the
least awful choice).
* Track the valid sync/dirty fields in kvm_run as a u64 to ensure KVM
KVM doesn't goof a sanity check in the future.
* Free obsolete roots when (re)loading the MMU to fix a bug where
pre-faulting memory can get stuck due to always encountering a stale
root.
* When dumping GHCB state, use KVM's snapshot instead of the raw GHCB page
to print state, so that KVM doesn't print stale/wrong information.
* When changing memory attributes (e.g. shared <=> private), add potential
hugepage ranges to the mmu_invalidate_range_{start,end} set so that KVM
doesn't create a shared/private hugepage when the the corresponding
attributes will become mixed (the attributes are commited *after* KVM
finishes the invalidation).
* Rework the SRSO mitigation to enable BP_SPEC_REDUCE only when KVM has at
least one active VM. Effectively BP_SPEC_REDUCE when KVM is loaded led
to very measurable performance regressions for non-KVM workloads.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmgfbqAUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNAywf+J9Ux+RccM8K2my3REQn7Z6WwMevX
CYgvdYBGt79AG8mjMKMfISzRDo3PrTi9wr+mEHfCpJ1F7CZTec/qdGY61tIjOhnE
86A5EoJcaoWhZcl4ubtQwRc//ENapwb6qI5uy10Nt30KTqS1S38M7FcZLvTYBYBx
A1Xehcnc8NOsOvXMyHvnsAi/X+yvj/wUfzETfzt5CFg8s9MHnmEFWlP+oOgNggbR
TKJVIvD0CTQR8lmdEcJYDrgWfhUsRq8qZyPAO37SoAn1tWfYAcpUUHEH2t2C6waW
shqmRx0HLshhbIWgySU2AdRx6Q3iyMIPSmTvzUhATEhEzM/IDk/DZstOyQ==
=aJFD
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"ARM:
- Avoid use of uninitialized memcache pointer in user_mem_abort()
- Always set HCR_EL2.xMO bits when running in VHE, allowing
interrupts to be taken while TGE=0 and fixing an ugly bug on
AmpereOne that occurs when taking an interrupt while clearing the
xMO bits (AC03_CPU_36)
- Prevent VMMs from hiding support for AArch64 at any EL virtualized
by KVM
- Save/restore the host value for HCRX_EL2 instead of restoring an
incorrect fixed value
- Make host_stage2_set_owner_locked() check that the entire requested
range is memory rather than just the first page
RISC-V:
- Add missing reset of smstateen CSRs
x86:
- Forcibly leave SMM on SHUTDOWN interception on AMD CPUs to avoid
causing problems due to KVM stuffing INIT on SHUTDOWN (KVM needs to
sanitize the VMCB as its state is undefined after SHUTDOWN,
emulating INIT is the least awful choice).
- Track the valid sync/dirty fields in kvm_run as a u64 to ensure KVM
KVM doesn't goof a sanity check in the future.
- Free obsolete roots when (re)loading the MMU to fix a bug where
pre-faulting memory can get stuck due to always encountering a
stale root.
- When dumping GHCB state, use KVM's snapshot instead of the raw GHCB
page to print state, so that KVM doesn't print stale/wrong
information.
- When changing memory attributes (e.g. shared <=> private), add
potential hugepage ranges to the mmu_invalidate_range_{start,end}
set so that KVM doesn't create a shared/private hugepage when the
the corresponding attributes will become mixed (the attributes are
commited *after* KVM finishes the invalidation).
- Rework the SRSO mitigation to enable BP_SPEC_REDUCE only when KVM
has at least one active VM. Effectively BP_SPEC_REDUCE when KVM is
loaded led to very measurable performance regressions for non-KVM
workloads"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SVM: Set/clear SRSO's BP_SPEC_REDUCE on 0 <=> 1 VM count transitions
KVM: arm64: Fix memory check in host_stage2_set_owner_locked()
KVM: arm64: Kill HCRX_HOST_FLAGS
KVM: arm64: Properly save/restore HCRX_EL2
KVM: arm64: selftest: Don't try to disable AArch64 support
KVM: arm64: Prevent userspace from disabling AArch64 support at any virtualisable EL
KVM: arm64: Force HCR_EL2.xMO to 1 at all times in VHE mode
KVM: arm64: Fix uninitialized memcache pointer in user_mem_abort()
KVM: x86/mmu: Prevent installing hugepages when mem attributes are changing
KVM: SVM: Update dump_ghcb() to use the GHCB snapshot fields
KVM: RISC-V: reset smstateen CSRs
KVM: x86/mmu: Check and free obsolete roots in kvm_mmu_reload()
KVM: x86: Check that the high 32bits are clear in kvm_arch_vcpu_ioctl_run()
KVM: SVM: Forcibly leave SMM mode on SHUTDOWN interception
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ibsn
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2025-05-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Ingo Molnar:
"Fix a boot regression on very old x86 CPUs without CPUID support"
* tag 'x86-urgent-2025-05-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode: Consolidate the loader enablement checking
The GHCB_MSR_VMPL_REQ_LEVEL macro lacked parentheses around the bitmask
expression, causing the shift operation to bind too early. As a result,
when requesting VMPL1 (e.g., GHCB_MSR_VMPL_REQ_LEVEL(1)), incorrect
values such as 0x000000016 were generated instead of the intended
0x100000016 (the requested VMPL level is specified in GHCBData[39:32]).
Fix the precedence issue by grouping the masked value before applying
the shift.
[ bp: Massage commit message. ]
Fixes: 34ff659017 ("x86/sev: Use kernel provided SVSM Calling Areas")
Signed-off-by: Seongman Lee <augustus92@kaist.ac.kr>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250511092329.12680-1-cloudlee1719@gmail.com
or aren't considered necessary for -stable kernels.
About half are for MM. Five OCFS2 fixes and a few MAINTAINERS updates.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaB/D0AAKCRDdBJ7gKXxA
jk1lAPwNV14Sra7MJpVsLGip2BaJLgG+9vQ/Fg3pntEhwX4u0gD/fXEzTog/A73O
xD7jQQStJYxHwu0K8CXIDUniZAXSSQw=
=US5c
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2025-05-10-14-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc hotfixes from Andrew Morton:
"22 hotfixes. 13 are cc:stable and the remainder address post-6.14
issues or aren't considered necessary for -stable kernels.
About half are for MM. Five OCFS2 fixes and a few MAINTAINERS updates"
* tag 'mm-hotfixes-stable-2025-05-10-14-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (22 commits)
mm: fix folio_pte_batch() on XEN PV
nilfs2: fix deadlock warnings caused by lock dependency in init_nilfs()
mm/hugetlb: copy the CMA flag when demoting
mm, swap: fix false warning for large allocation with !THP_SWAP
selftests/mm: fix a build failure on powerpc
selftests/mm: fix build break when compiling pkey_util.c
mm: vmalloc: support more granular vrealloc() sizing
tools/testing/selftests: fix guard region test tmpfs assumption
ocfs2: stop quota recovery before disabling quotas
ocfs2: implement handshaking with ocfs2 recovery thread
ocfs2: switch osb->disable_recovery to enum
mailmap: map Uwe's BayLibre addresses to a single one
MAINTAINERS: add mm THP section
mm/userfaultfd: fix uninitialized output field for -EAGAIN race
selftests/mm: compaction_test: support platform with huge mount of memory
MAINTAINERS: add core mm section
ocfs2: fix panic in failed foilio allocation
mm/huge_memory: fix dereferencing invalid pmd migration entry
MAINTAINERS: add reverse mapping section
x86: disable image size check for test builds
...
- Forcibly leave SMM on SHUTDOWN interception on AMD CPUs to avoid causing
problems due to KVM stuffing INIT on SHUTDOWN (KVM needs to sanitize the
VMCB as its state is undefined after SHUTDOWN, emulating INIT is the
least awful choice).
- Track the valid sync/dirty fields in kvm_run as a u64 to ensure KVM
KVM doesn't goof a sanity check in the future.
- Free obsolete roots when (re)loading the MMU to fix a bug where
pre-faulting memory can get stuck due to always encountering a stale
root.
- When dumping GHCB state, use KVM's snapshot instead of the raw GHCB page
to print state, so that KVM doesn't print stale/wrong information.
- When changing memory attributes (e.g. shared <=> private), add potential
hugepage ranges to the mmu_invalidate_range_{start,end} set so that KVM
doesn't create a shared/private hugepage when the the corresponding
attributes will become mixed (the attributes are commited *after* KVM
finishes the invalidation).
- Rework the SRSO mitigation to enable BP_SPEC_REDUCE only when KVM has at
least one active VM. Effectively BP_SPEC_REDUCE when KVM is loaded led
to very measurable performance regressions for non-KVM workloads.
-----BEGIN PGP SIGNATURE-----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=r4B/
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-fixes-6.15-rcN' of https://github.com/kvm-x86/linux into HEAD
KVM x86 fixes for 6.15-rcN
- Forcibly leave SMM on SHUTDOWN interception on AMD CPUs to avoid causing
problems due to KVM stuffing INIT on SHUTDOWN (KVM needs to sanitize the
VMCB as its state is undefined after SHUTDOWN, emulating INIT is the
least awful choice).
- Track the valid sync/dirty fields in kvm_run as a u64 to ensure KVM
KVM doesn't goof a sanity check in the future.
- Free obsolete roots when (re)loading the MMU to fix a bug where
pre-faulting memory can get stuck due to always encountering a stale
root.
- When dumping GHCB state, use KVM's snapshot instead of the raw GHCB page
to print state, so that KVM doesn't print stale/wrong information.
- When changing memory attributes (e.g. shared <=> private), add potential
hugepage ranges to the mmu_invalidate_range_{start,end} set so that KVM
doesn't create a shared/private hugepage when the the corresponding
attributes will become mixed (the attributes are commited *after* KVM
finishes the invalidation).
- Rework the SRSO mitigation to enable BP_SPEC_REDUCE only when KVM has at
least one active VM. Effectively BP_SPEC_REDUCE when KVM is loaded led
to very measurable performance regressions for non-KVM workloads.
Make the architecture-optimized CRC code do its CPU feature checks in
subsys_initcalls instead of arch_initcalls. This makes it consistent
with arch/*/lib/crypto/ and ensures that it runs after initcalls that
possibly could be a prerequisite for kernel-mode FPU, such as x86's
xfd_update_static_branch() and loongarch's init_euen_mask().
Note: as far as I can tell, x86's xfd_update_static_branch() isn't
*actually* needed for kernel-mode FPU. loongarch's init_euen_mask() is
needed to enable save/restore of the vector registers, but loongarch
doesn't yet have any CRC or crypto code that uses vector registers
anyway. Regardless, let's be consistent with arch/*/lib/crypto/ and
robust against any potential future dependency on an arch_initcall.
Link: https://lore.kernel.org/r/20250510035959.87995-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Toolchain and infrastructure:
- Make CFI_AUTO_DEFAULT depend on !RUST or Rust >= 1.88.0.
- Clean Rust (and Clippy) lints for the upcoming Rust 1.87.0 and Rust
1.88.0 releases.
- Clean objtool warning for the upcoming Rust 1.87.0 release by adding
one more noreturn function.
-----BEGIN PGP SIGNATURE-----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=lyOI
-----END PGP SIGNATURE-----
Merge tag 'rust-fixes-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull rust fixes from Miguel Ojeda:
- Make CFI_AUTO_DEFAULT depend on !RUST or Rust >= 1.88.0
- Clean Rust (and Clippy) lints for the upcoming Rust 1.87.0 and 1.88.0
releases
- Clean objtool warning for the upcoming Rust 1.87.0 release by adding
one more noreturn function
* tag 'rust-fixes-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
x86/Kconfig: make CFI_AUTO_DEFAULT depend on !RUST or Rust >= 1.88
rust: clean Rust 1.88.0's `clippy::uninlined_format_args` lint
rust: clean Rust 1.88.0's warning about `clippy::disallowed_macros` configuration
rust: clean Rust 1.88.0's `unnecessary_transmutes` lint
rust: allow Rust 1.87.0's `clippy::ptr_eq` lint
objtool/rust: add one more `noreturn` Rust function for Rust 1.87.0
FineIBT-paranoid was using the retpoline bytes for the paranoid check,
disabling retpolines, because all parts that have IBT also have eIBRS
and thus don't need no stinking retpolines.
Except... ITS needs the retpolines for indirect calls must not be in
the first half of a cacheline :-/
So what was the paranoid call sequence:
<fineibt_paranoid_start>:
0: 41 ba 78 56 34 12 mov $0x12345678, %r10d
6: 45 3b 53 f7 cmp -0x9(%r11), %r10d
a: 4d 8d 5b <f0> lea -0x10(%r11), %r11
e: 75 fd jne d <fineibt_paranoid_start+0xd>
10: 41 ff d3 call *%r11
13: 90 nop
Now becomes:
<fineibt_paranoid_start>:
0: 41 ba 78 56 34 12 mov $0x12345678, %r10d
6: 45 3b 53 f7 cmp -0x9(%r11), %r10d
a: 4d 8d 5b f0 lea -0x10(%r11), %r11
e: 2e e8 XX XX XX XX cs call __x86_indirect_paranoid_thunk_r11
Where the paranoid_thunk looks like:
1d: <ea> (bad)
__x86_indirect_paranoid_thunk_r11:
1e: 75 fd jne 1d
__x86_indirect_its_thunk_r11:
20: 41 ff eb jmp *%r11
23: cc int3
[ dhansen: remove initialization to false ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
ITS mitigation moves the unsafe indirect branches to a safe thunk. This
could degrade the prediction accuracy as the source address of indirect
branches becomes same for different execution paths.
To improve the predictions, and hence the performance, assign a separate
thunk for each indirect callsite. This is also a defense-in-depth measure
to avoid indirect branches aliasing with each other.
As an example, 5000 dynamic thunks would utilize around 16 bits of the
address space, thereby gaining entropy. For a BTB that uses
32 bits for indexing, dynamic thunks could provide better prediction
accuracy over fixed thunks.
Have ITS thunks be variable sized and use EXECMEM_MODULE_TEXT such that
they are both more flexible (got to extend them later) and live in 2M TLBs,
just like kernel code, avoiding undue TLB pressure.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
cfi_rewrite_callers() updates the fineIBT hash matching at the caller side,
but except for paranoid-mode it relies on apply_retpoline() and friends for
any ENDBR relocation. This could temporarily cause an indirect branch to
land on a poisoned ENDBR.
For instance, with para-virtualization enabled, a simple wrmsrl() could
have an indirect branch pointing to native_write_msr() who's ENDBR has been
relocated due to fineIBT:
<wrmsrl>:
push %rbp
mov %rsp,%rbp
mov %esi,%eax
mov %rsi,%rdx
shr $0x20,%rdx
mov %edi,%edi
mov %rax,%rsi
call *0x21e65d0(%rip) # <pv_ops+0xb8>
^^^^^^^^^^^^^^^^^^^^^^^
Such an indirect call during the alternative patching could #CP if the
caller is not *yet* adjusted for the new target ENDBR. To prevent a false
#CP, keep CET-IBT disabled until all callers are patched.
Patching during the module load does not need to be guarded by IBT-disable
because the module code is not executed until the patching is complete.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Early kernel memory is RWX, only at the end of early boot (before SMP)
do we mark things ROX. Have execmem_cache mirror this behaviour for
early users.
This avoids having to remember what code is execmem and what is not --
we can poke everything with impunity ;-) Also performance for not
having to do endless text_poke_mm switches.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
The software mitigation for BHI is to execute BHB clear sequence at syscall
entry, and possibly after a cBPF program. ITS mitigation thunks RETs in the
lower half of the cacheline. This causes the RETs in the BHB clear sequence
to be thunked as well, adding unnecessary branches to the BHB clear
sequence.
Since the sequence is in hot path, align the RET instructions in the
sequence to avoid thunking.
This is how disassembly clear_bhb_loop() looks like after this change:
0x44 <+4>: mov $0x5,%ecx
0x49 <+9>: call 0xffffffff81001d9b <clear_bhb_loop+91>
0x4e <+14>: jmp 0xffffffff81001de5 <clear_bhb_loop+165>
0x53 <+19>: int3
...
0x9b <+91>: call 0xffffffff81001dce <clear_bhb_loop+142>
0xa0 <+96>: ret
0xa1 <+97>: int3
...
0xce <+142>: mov $0x5,%eax
0xd3 <+147>: jmp 0xffffffff81001dd6 <clear_bhb_loop+150>
0xd5 <+149>: nop
0xd6 <+150>: sub $0x1,%eax
0xd9 <+153>: jne 0xffffffff81001dd3 <clear_bhb_loop+147>
0xdb <+155>: sub $0x1,%ecx
0xde <+158>: jne 0xffffffff81001d9b <clear_bhb_loop+91>
0xe0 <+160>: ret
0xe1 <+161>: int3
0xe2 <+162>: int3
0xe3 <+163>: int3
0xe4 <+164>: int3
0xe5 <+165>: lfence
0xe8 <+168>: pop %rbp
0xe9 <+169>: ret
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
When retpoline mitigation is enabled for spectre-v2, enabling
call-depth-tracking and RSB stuffing also mitigates ITS. Add cmdline option
indirect_target_selection=stuff to allow enabling RSB stuffing mitigation.
When retpoline mitigation is not enabled, =stuff option is ignored, and
default mitigation for ITS is deployed.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Ice Lake generation CPUs are not affected by guest/host isolation part of
ITS. If a user is only concerned about KVM guests, they can now choose a
new cmdline option "vmexit" that will not deploy the ITS mitigation when
CPU is not affected by guest/host isolation. This saves the performance
overhead of ITS mitigation on Ice Lake gen CPUs.
When "vmexit" option selected, if the CPU is affected by ITS guest/host
isolation, the default ITS mitigation is deployed.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Indirect Target Selection (ITS) is a bug in some pre-ADL Intel CPUs with
eIBRS. It affects prediction of indirect branch and RETs in the
lower half of cacheline. Due to ITS such branches may get wrongly predicted
to a target of (direct or indirect) branch that is located in the upper
half of the cacheline.
Scope of impact
===============
Guest/host isolation
--------------------
When eIBRS is used for guest/host isolation, the indirect branches in the
VMM may still be predicted with targets corresponding to branches in the
guest.
Intra-mode
----------
cBPF or other native gadgets can be used for intra-mode training and
disclosure using ITS.
User/kernel isolation
---------------------
When eIBRS is enabled user/kernel isolation is not impacted.
Indirect Branch Prediction Barrier (IBPB)
-----------------------------------------
After an IBPB, indirect branches may be predicted with targets
corresponding to direct branches which were executed prior to IBPB. This is
mitigated by a microcode update.
Add cmdline parameter indirect_target_selection=off|on|force to control the
mitigation to relocate the affected branches to an ITS-safe thunk i.e.
located in the upper half of cacheline. Also add the sysfs reporting.
When retpoline mitigation is deployed, ITS safe-thunks are not needed,
because retpoline sequence is already ITS-safe. Similarly, when call depth
tracking (CDT) mitigation is deployed (retbleed=stuff), ITS safe return
thunk is not used, as CDT prevents RSB-underflow.
To not overcomplicate things, ITS mitigation is not supported with
spectre-v2 lfence;jmp mitigation. Moreover, it is less practical to deploy
lfence;jmp mitigation on ITS affected parts anyways.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
RETs in the lower half of cacheline may be affected by ITS bug,
specifically when the RSB-underflows. Use ITS-safe return thunk for such
RETs.
RETs that are not patched:
- RET in retpoline sequence does not need to be patched, because the
sequence itself fills an RSB before RET.
- RET in Call Depth Tracking (CDT) thunks __x86_indirect_{call|jump}_thunk
and call_depth_return_thunk are not patched because CDT by design
prevents RSB-underflow.
- RETs in .init section are not reachable after init.
- RETs that are explicitly marked safe with ANNOTATE_UNRET_SAFE.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Due to ITS, indirect branches in the lower half of a cacheline may be
vulnerable to branch target injection attack.
Introduce ITS-safe thunks to patch indirect branches in the lower half of
cacheline with the thunk. Also thunk any eBPF generated indirect branches
in emit_indirect_jump().
Below category of indirect branches are not mitigated:
- Indirect branches in the .init section are not mitigated because they are
discarded after boot.
- Indirect branches that are explicitly marked retpoline-safe.
Note that retpoline also mitigates the indirect branches against ITS. This
is because the retpoline sequence fills an RSB entry before RET, and it
does not suffer from RSB-underflow part of the ITS.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
ITS bug in some pre-Alderlake Intel CPUs may allow indirect branches in the
first half of a cache line get predicted to a target of a branch located in
the second half of the cache line.
Set X86_BUG_ITS on affected CPUs. Mitigation to follow in later commits.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
tl;dr: There is a window in the mm switching code where the new CR3 is
set and the CPU should be getting TLB flushes for the new mm. But
should_flush_tlb() has a bug and suppresses the flush. Fix it by
widening the window where should_flush_tlb() sends an IPI.
Long Version:
=== History ===
There were a few things leading up to this.
First, updating mm_cpumask() was observed to be too expensive, so it was
made lazier. But being lazy caused too many unnecessary IPIs to CPUs
due to the now-lazy mm_cpumask(). So code was added to cull
mm_cpumask() periodically[2]. But that culling was a bit too aggressive
and skipped sending TLB flushes to CPUs that need them. So here we are
again.
=== Problem ===
The too-aggressive code in should_flush_tlb() strikes in this window:
// Turn on IPIs for this CPU/mm combination, but only
// if should_flush_tlb() agrees:
cpumask_set_cpu(cpu, mm_cpumask(next));
next_tlb_gen = atomic64_read(&next->context.tlb_gen);
choose_new_asid(next, next_tlb_gen, &new_asid, &need_flush);
load_new_mm_cr3(need_flush);
// ^ After 'need_flush' is set to false, IPIs *MUST*
// be sent to this CPU and not be ignored.
this_cpu_write(cpu_tlbstate.loaded_mm, next);
// ^ Not until this point does should_flush_tlb()
// become true!
should_flush_tlb() will suppress TLB flushes between load_new_mm_cr3()
and writing to 'loaded_mm', which is a window where they should not be
suppressed. Whoops.
=== Solution ===
Thankfully, the fuzzy "just about to write CR3" window is already marked
with loaded_mm==LOADED_MM_SWITCHING. Simply checking for that state in
should_flush_tlb() is sufficient to ensure that the CPU is targeted with
an IPI.
This will cause more TLB flush IPIs. But the window is relatively small
and I do not expect this to cause any kind of measurable performance
impact.
Update the comment where LOADED_MM_SWITCHING is written since it grew
yet another user.
Peter Z also raised a concern that should_flush_tlb() might not observe
'loaded_mm' and 'is_lazy' in the same order that switch_mm_irqs_off()
writes them. Add a barrier to ensure that they are observed in the
order they are written.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Rik van Riel <riel@surriel.com>
Link: https://lore.kernel.org/oe-lkp/202411282207.6bd28eae-lkp@intel.com/ [1]
Fixes: 6db2526c1d ("x86/mm/tlb: Only trim the mm_cpumask once a second") [2]
Reported-by: Stephen Dolan <sdolan@janestreet.com>
Cc: stable@vger.kernel.org
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Return `-EBUSY` from tdx_mcall_get_report0() when `TDG.MR.REPORT` returns
`TDCALL_OPERAND_BUSY`. This enables the caller to retry obtaining a
TDREPORT later if another VCPU is extending an RTMR concurrently.
Signed-off-by: Cedric Xing <cedric.xing@intel.com>
Acked-by: Dionna Amalie Glaze <dionnaglaze@google.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://patch.msgid.link/20250506-tdx-rtmr-v6-4-ac6ff5e9d58a@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The TDX guest exposes one MRTD (Build-time Measurement Register) and four
RTMR (Run-time Measurement Register) registers to record the build and boot
measurements of a virtual machine (VM). These registers are similar to PCR
(Platform Configuration Register) registers in the TPM (Trusted Platform
Module) space. This measurement data is used to implement security features
like attestation and trusted boot.
To facilitate updating the RTMR registers, the TDX module provides support
for the `TDG.MR.RTMR.EXTEND` TDCALL which can be used to securely extend
the RTMR registers.
Add helper function to update RTMR registers. It will be used by the TDX
guest driver in enabling RTMR extension support.
Co-developed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Cedric Xing <cedric.xing@intel.com>
Acked-by: Dionna Amalie Glaze <dionnaglaze@google.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://patch.msgid.link/20250506-tdx-rtmr-v6-3-ac6ff5e9d58a@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Set the magic BP_SPEC_REDUCE bit to mitigate SRSO when running VMs if and
only if KVM has at least one active VM. Leaving the bit set at all times
unfortunately degrades performance by a wee bit more than expected.
Use a dedicated spinlock and counter instead of hooking virtualization
enablement, as changing the behavior of kvm.enable_virt_at_load based on
SRSO_BP_SPEC_REDUCE is painful, and has its own drawbacks, e.g. could
result in performance issues for flows that are sensitive to VM creation
latency.
Defer setting BP_SPEC_REDUCE until VMRUN is imminent to avoid impacting
performance on CPUs that aren't running VMs, e.g. if a setup is using
housekeeping CPUs. Setting BP_SPEC_REDUCE in task context, i.e. without
blasting IPIs to all CPUs, also helps avoid serializing 1<=>N transitions
without incurring a gross amount of complexity (see the Link for details
on how ugly coordinating via IPIs gets).
Link: https://lore.kernel.org/all/aBOnzNCngyS_pQIW@google.com
Fixes: 8442df2b49 ("x86/bugs: KVM: Add support for SRSO_MSR_FIX")
Reported-by: Michael Larabel <Michael@michaellarabel.com>
Closes: https://www.phoronix.com/review/linux-615-amd-regression
Cc: Borislav Petkov <bp@alien8.de>
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20250505180300.973137-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
report_ubsan_failure() doesn't use argument regs, and soon it will
be called from the hypervisor context were regs are not available.
So, remove the unused argument.
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Acked-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20250430162713.1997569-3-smostafa@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Calling core::fmt::write() from rust code while FineIBT is enabled
results in a kernel panic:
[ 4614.199779] kernel BUG at arch/x86/kernel/cet.c:132!
[ 4614.205343] Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
[ 4614.211781] CPU: 2 UID: 0 PID: 6057 Comm: dmabuf_dump Tainted: G U O 6.12.17-android16-0-g6ab38c534a43 #1 9da040f27673ec3945e23b998a0f8bd64c846599
[ 4614.227832] Tainted: [U]=USER, [O]=OOT_MODULE
[ 4614.241247] RIP: 0010:do_kernel_cp_fault+0xea/0xf0
...
[ 4614.398144] RIP: 0010:_RNvXs5_NtNtNtCs3o2tGsuHyou_4core3fmt3num3impyNtB9_7Display3fmt+0x0/0x20
[ 4614.407792] Code: 48 f7 df 48 0f 48 f9 48 89 f2 89 c6 5d e9 18 fd ff ff 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 41 81 ea 14 61 af 2c 74 03 0f 0b 90 <66> 0f 1f 00 55 48 89 e5 48 89 f2 48 8b 3f be 01 00 00 00 5d e9 e7
[ 4614.428775] RSP: 0018:ffffb95acfa4ba68 EFLAGS: 00010246
[ 4614.434609] RAX: 0000000000000000 RBX: 0000000000000010 RCX: 0000000000000000
[ 4614.442587] RDX: 0000000000000007 RSI: ffffb95acfa4ba70 RDI: ffffb95acfa4bc88
[ 4614.450557] RBP: ffffb95acfa4bae0 R08: ffff0a00ffffff05 R09: 0000000000000070
[ 4614.458527] R10: 0000000000000000 R11: ffffffffab67eaf0 R12: ffffb95acfa4bcc8
[ 4614.466493] R13: ffffffffac5d50f0 R14: 0000000000000000 R15: 0000000000000000
[ 4614.474473] ? __cfi__RNvXs5_NtNtNtCs3o2tGsuHyou_4core3fmt3num3impyNtB9_7Display3fmt+0x10/0x10
[ 4614.484118] ? _RNvNtCs3o2tGsuHyou_4core3fmt5write+0x1d2/0x250
This happens because core::fmt::write() calls
core::fmt::rt::Argument::fmt(), which currently has CFI disabled:
library/core/src/fmt/rt.rs:
171 // FIXME: Transmuting formatter in new and indirectly branching to/calling
172 // it here is an explicit CFI violation.
173 #[allow(inline_no_sanitize)]
174 #[no_sanitize(cfi, kcfi)]
175 #[inline]
176 pub(super) unsafe fn fmt(&self, f: &mut Formatter<'_>) -> Result {
This causes a Control Protection exception, because FineIBT has sealed
off the original function's endbr64.
This makes rust currently incompatible with FineIBT. Add a Kconfig
dependency that prevents FineIBT from getting turned on by default
if rust is enabled.
[ Rust 1.88.0 (scheduled for 2025-06-26) should have this fixed [1],
and thus we relaxed the condition with Rust >= 1.88.
When `objtool` lands checking for this with e.g. [2], the plan is
to ideally run that in upstream Rust's CI to prevent regressions
early [3], since we do not control `core`'s source code.
Alice tested the Rust PR backported to an older compiler.
Peter would like that Rust provides a stable `core` which can be
pulled into the kernel: "Relying on that much out of tree code is
'unfortunate'".
- Miguel ]
Signed-off-by: Paweł Anikiel <panikiel@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://github.com/rust-lang/rust/pull/139632 [1]
Link: https://lore.kernel.org/rust-for-linux/20250410154556.GB9003@noisy.programming.kicks-ass.net/ [2]
Link: https://github.com/rust-lang/rust/pull/139632#issuecomment-2801950873 [3]
Link: https://lore.kernel.org/r/20250410115420.366349-1-panikiel@google.com
Link: https://lore.kernel.org/r/att0-CANiq72kjDM0cKALVy4POEzhfdT4nO7tqz0Pm7xM+3=_0+L1t=A@mail.gmail.com
[ Reduced splat. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
With the possibility of intra-mode BHI via cBPF, complete mitigation for
BHI is to use IBHF (history fence) instruction with BHI_DIS_S set. Since
this new instruction is only available in 64-bit mode, setting BHI_DIS_S in
32-bit mode is only a partial mitigation.
Do not set BHI_DIS_S in 32-bit mode so as to avoid reporting misleading
mitigated status. With this change IBHF won't be used in 32-bit mode, also
remove the CONFIG_X86_64 check from emit_spectre_bhb_barrier().
Suggested-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Classic BPF programs can be run by unprivileged users, allowing
unprivileged code to execute inside the kernel. Attackers can use this to
craft branch history in kernel mode that can influence the target of
indirect branches.
BHI_DIS_S provides user-kernel isolation of branch history, but cBPF can be
used to bypass this protection by crafting branch history in kernel mode.
To stop intra-mode attacks via cBPF programs, Intel created a new
instruction Indirect Branch History Fence (IBHF). IBHF prevents the
predicted targets of subsequent indirect branches from being influenced by
branch history prior to the IBHF. IBHF is only effective while BHI_DIS_S is
enabled.
Add the IBHF instruction to cBPF jitted code's exit path. Add the new fence
when the hardware mitigation is enabled (i.e., X86_FEATURE_CLEAR_BHB_HW is
set) or after the software sequence (X86_FEATURE_CLEAR_BHB_LOOP) is being
used in a virtual machine. Note that X86_FEATURE_CLEAR_BHB_HW and
X86_FEATURE_CLEAR_BHB_LOOP are mutually exclusive, so the JIT compiler will
only emit the new fence, not the SW sequence, when X86_FEATURE_CLEAR_BHB_HW
is set.
Hardware that enumerates BHI_NO basically has BHI_DIS_S protections always
enabled, regardless of the value of BHI_DIS_S. Since BHI_DIS_S doesn't
protect against intra-mode attacks, enumerate BHI bug on BHI_NO hardware as
well.
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Classic BPF programs have been identified as potential vectors for
intra-mode Branch Target Injection (BTI) attacks. Classic BPF programs can
be run by unprivileged users. They allow unprivileged code to execute
inside the kernel. Attackers can use unprivileged cBPF to craft branch
history in kernel mode that can influence the target of indirect branches.
Introduce a branch history buffer (BHB) clearing sequence during the JIT
compilation of classic BPF programs. The clearing sequence is the same as
is used in previous mitigations to protect syscalls. Since eBPF programs
already have their own mitigations in place, only insert the call on
classic programs that aren't run by privileged users.
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
In commit 2e044911be ("x86/traps: Decode 0xEA instructions as #UD")
FineIBT starts using 0xEA as an invalid instruction like UD2. But
insn decoder always returns the length of "0xea" instruction as 7
because it does not check the (i64) superscript.
The x86 instruction decoder should also decode 0xEA on x86-64 as
a one-byte invalid instruction by decoding the "(i64)" superscript tag.
This stops decoding instruction which has (i64) but does not have (o64)
superscript in 64-bit mode at opcode and skips other fields.
With this change, insn_decoder_test says 0xea is 1 byte length if
x86-64 (-y option means 64-bit):
$ printf "0:\tea\t\n" | insn_decoder_test -y -v
insn_decoder_test: success: Decoded and checked 1 instructions
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/174580490000.388420.5225447607417115496.stgit@devnote2
Commit:
159039af8c ("x86/insn: x86/insn: Add support for REX2 prefix to the instruction decoder opcode map")
added (!REX2) superscript with a space, but the correct format requires ','
for concatination with other superscript tags.
Add ',' to generate correct insn attribute tables.
I confirmed with following command:
arch/x86/lib/x86-opcode-map.txt | grep e8 | head -n 1
[0xe8] = INAT_MAKE_IMM(INAT_IMM_VWORD32) | INAT_FORCE64 | INAT_NO_REX2,
Fixes: 159039af8c ("x86/insn: x86/insn: Add support for REX2 prefix to the instruction decoder opcode map")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/174580489027.388420.15539375184727726142.stgit@devnote2
Remove @perm from the guest pseudo FPU container. The field is
initialized during allocation and never used later.
Rename fpu_init_guest_permissions() to show that its sole purpose is to
lock down guest permissions.
Suggested-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Chao Gao <chao.gao@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Chang S. Bae <chang.seok.bae@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mitchell Levy <levymitchell0@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Samuel Holland <samuel.holland@sifive.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/kvm/af972fe5981b9e7101b64de43c7be0a8cc165323.camel@redhat.com/
Link: https://lore.kernel.org/r/20250506093740.2864458-3-chao.gao@intel.com
When granting userspace or a KVM guest access to an xfeature, preserve the
entity's existing supervisor and software-defined permissions as tracked
by __state_perm, i.e. use __state_perm to track *all* permissions even
though all supported supervisor xfeatures are granted to all FPUs and
FPU_GUEST_PERM_LOCKED disallows changing permissions.
Effectively clobbering supervisor permissions results in inconsistent
behavior, as xstate_get_group_perm() will report supervisor features for
process that do NOT request access to dynamic user xfeatures, whereas any
and all supervisor features will be absent from the set of permissions for
any process that is granted access to one or more dynamic xfeatures (which
right now means AMX).
The inconsistency isn't problematic because fpu_xstate_prctl() already
strips out everything except user xfeatures:
case ARCH_GET_XCOMP_PERM:
/*
* Lockless snapshot as it can also change right after the
* dropping the lock.
*/
permitted = xstate_get_host_group_perm();
permitted &= XFEATURE_MASK_USER_SUPPORTED;
return put_user(permitted, uptr);
case ARCH_GET_XCOMP_GUEST_PERM:
permitted = xstate_get_guest_group_perm();
permitted &= XFEATURE_MASK_USER_SUPPORTED;
return put_user(permitted, uptr);
and similarly KVM doesn't apply the __state_perm to supervisor states
(kvm_get_filtered_xcr0() incorporates xstate_get_guest_group_perm()):
case 0xd: {
u64 permitted_xcr0 = kvm_get_filtered_xcr0();
u64 permitted_xss = kvm_caps.supported_xss;
But if KVM in particular were to ever change, dropping supervisor
permissions would result in subtle bugs in KVM's reporting of supported
CPUID settings. And the above behavior also means that having supervisor
xfeatures in __state_perm is correctly handled by all users.
Dropping supervisor permissions also creates another landmine for KVM. If
more dynamic user xfeatures are ever added, requesting access to multiple
xfeatures in separate ARCH_REQ_XCOMP_GUEST_PERM calls will result in the
second invocation of __xstate_request_perm() computing the wrong ksize, as
as the mask passed to xstate_calculate_size() would not contain *any*
supervisor features.
Commit 781c64bfcb ("x86/fpu/xstate: Handle supervisor states in XSTATE
permissions") fudged around the size issue for userspace FPUs, but for
reasons unknown skipped guest FPUs. Lack of a fix for KVM "works" only
because KVM doesn't yet support virtualizing features that have supervisor
xfeatures, i.e. as of today, KVM guest FPUs will never need the relevant
xfeatures.
Simply extending the hack-a-fix for guests would temporarily solve the
ksize issue, but wouldn't address the inconsistency issue and would leave
another lurking pitfall for KVM. KVM support for virtualizing CET will
likely add CET_KERNEL as a guest-only xfeature, i.e. CET_KERNEL will not
be set in xfeatures_mask_supervisor() and would again be dropped when
granting access to dynamic xfeatures.
Note, the existing clobbering behavior is rather subtle. The @permitted
parameter to __xstate_request_perm() comes from:
permitted = xstate_get_group_perm(guest);
which is either fpu->guest_perm.__state_perm or fpu->perm.__state_perm,
where __state_perm is initialized to:
fpu->perm.__state_perm = fpu_kernel_cfg.default_features;
and copied to the guest side of things:
/* Same defaults for guests */
fpu->guest_perm = fpu->perm;
fpu_kernel_cfg.default_features contains everything except the dynamic
xfeatures, i.e. everything except XFEATURE_MASK_XTILE_DATA:
fpu_kernel_cfg.default_features = fpu_kernel_cfg.max_features;
fpu_kernel_cfg.default_features &= ~XFEATURE_MASK_USER_DYNAMIC;
When __xstate_request_perm() restricts the local "mask" variable to
compute the user state size:
mask &= XFEATURE_MASK_USER_SUPPORTED;
usize = xstate_calculate_size(mask, false);
it subtly overwrites the target __state_perm with "mask" containing only
user xfeatures:
perm = guest ? &fpu->guest_perm : &fpu->perm;
/* Pairs with the READ_ONCE() in xstate_get_group_perm() */
WRITE_ONCE(perm->__state_perm, mask);
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Yang Weijiang <weijiang.yang@intel.com>
Signed-off-by: Chao Gao <chao.gao@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Reviewed-by: Chang S. Bae <chang.seok.bae@intel.com>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: John Allen <john.allen@amd.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mitchell Levy <levymitchell0@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Samuel Holland <samuel.holland@sifive.com>
Cc: Sohil Mehta <sohil.mehta@intel.com>
Cc: Vignesh Balasubramanian <vigbalas@amd.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Xin Li <xin3.li@intel.com>
Cc: kvm@vger.kernel.org
Link: https://lore.kernel.org/all/ZTqgzZl-reO1m01I@google.com
Link: https://lore.kernel.org/r/20250506093740.2864458-2-chao.gao@intel.com
Multiple testers reported the following new warning:
WARNING: CPU: 0 PID: 0 at arch/x86/mm/tlb.c:795
Which corresponds to:
if (IS_ENABLED(CONFIG_DEBUG_VM) && WARN_ON_ONCE(prev != &init_mm &&
!cpumask_test_cpu(cpu, mm_cpumask(next))))
cpumask_set_cpu(cpu, mm_cpumask(next));
So the problem is that unuse_temporary_mm() explicitly clears
that bit; and it has to, because otherwise the flush_tlb_mm_range() in
__text_poke() will try sending IPIs, which are not at all needed.
See also:
https://lore.kernel.org/all/20241113095550.GBZzR3pg-RhJKPDazS@fat_crate.local/
Notably, the whole {,un}use_temporary_mm() thing requires preemption to
be disabled across it with the express purpose of keeping all TLB
nonsense CPU local, such that invalidations can also stay local etc.
However, as a side-effect, we violate this above WARN(), which sorta
makes sense for the normal case, but very much doesn't make sense here.
Change unuse_temporary_mm() to mark the mm_struct such that a further
exception (beyond init_mm) can be grafted, to keep the warning for all
the other cases.
Reported-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reported-by: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rik van Riel <riel@surriel.com>
Link: https://lore.kernel.org/r/20250430081154.GH4439@noisy.programming.kicks-ass.net
CPUID(0x80000000).EAX returns the max extended CPUID leaf available. On
x86-32 machines without an extended CPUID range, a CPUID(0x80000000)
query will just repeat the output of the last valid standard CPUID leaf
on the CPU; i.e., a garbage values. Current tip:x86/cpu code protects against
this by doing:
eax = cpuid_eax(0x80000000);
c->extended_cpuid_level = eax;
if ((eax & 0xffff0000) == 0x80000000) {
// CPU has an extended CPUID range. Check for 0x80000001
if (eax >= 0x80000001) {
cpuid(0x80000001, ...);
}
}
This is correct so far. Afterwards though, the same possibly broken EAX
value is used to check the availability of other extended CPUID leaves:
if (c->extended_cpuid_level >= 0x80000007)
...
if (c->extended_cpuid_level >= 0x80000008)
...
if (c->extended_cpuid_level >= 0x8000000a)
...
if (c->extended_cpuid_level >= 0x8000001f)
...
which is invalid. Fix this by immediately setting the CPU's max extended
CPUID leaf to zero if CPUID(0x80000000).EAX doesn't indicate a valid
CPUID extended range.
While at it, add a comment, similar to kernel/head_32.S, clarifying the
CPUID(0x80000000) sanity check.
References: 8a50e5135a ("x86-32: Use symbolic constants, safer CPUID when enabling EFER.NX")
Fixes: 3da99c9776 ("x86: make (early)_identify_cpu more the same between 32bit and 64 bit")
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: x86-cpuid@lists.linux.dev
Link: https://lore.kernel.org/r/20250506050437.10264-3-darwi@linutronix.de
Remove some unfortunately-named unused macros which could potentially
result in weird build failures. Fortunately, they are under an #ifdef
__ASSEMBLER__ which has kept them from causing problems so far.
[ dhansen: subject and changelog tweaks ]
Fixes: 1a6ade8250 ("x86/alternative: Convert the asm ALTERNATIVE_3() macro")
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20250505131646.29288-1-jgross%40suse.com
The following register contains bits that indicate the cause for the
previous reset.
PMx000000C0 (FCH::PM::S5_RESET_STATUS)
This is useful for debug. The reasons for reset are broken into 6 high level
categories. Decode it by category and print during boot.
Specifics within a category are split off into debugging documentation.
The register is accessed indirectly through a "PM" port in the FCH. Use
MMIO access in order to avoid restrictions with legacy port access.
Use a late_initcall() to ensure that MMIO has been set up before trying to
access the register.
This register was introduced with AMD Family 17h, so avoid access on older
families. There is no CPUID feature bit for this register.
[ bp: Simplify the reason dumping loop.
- merge a fix to not access an array element after the last one:
https://lore.kernel.org/r/20250505133609.83933-1-superm1@kernel.org
Reported-by: James Dutton <james.dutton@gmail.com>
]
[ mingo:
- Use consistent .rst formatting
- Fix 'Sleep' class field to 'ACPI-State'
- Standardize pin messages around the 'tripped' verbiage
- Remove reference to ring-buffer printing & simplify the wording
- Use curly braces for multi-line conditional statements ]
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Co-developed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250422234830.2840784-6-superm1@kernel.org
Borislav Petkov reported the following boot crash on x86-32,
with CONFIG_HARDENED_USERCOPY=y:
| usercopy: Kernel memory overwrite attempt detected to SLUB object 'task_struct' (offset 2112, size 160)!
| ...
| kernel BUG at mm/usercopy.c:102!
So the useroffset and usersize arguments are what control the allowed
window of copying in/out of the "task_struct" kmem cache:
/* create a slab on which task_structs can be allocated */
task_struct_whitelist(&useroffset, &usersize);
task_struct_cachep = kmem_cache_create_usercopy("task_struct",
arch_task_struct_size, align,
SLAB_PANIC|SLAB_ACCOUNT,
useroffset, usersize, NULL);
task_struct_whitelist() positions this window based on the location of
the thread_struct within task_struct, and gets the arch-specific details
via arch_thread_struct_whitelist(offset, size):
static void __init task_struct_whitelist(unsigned long *offset, unsigned long *size)
{
/* Fetch thread_struct whitelist for the architecture. */
arch_thread_struct_whitelist(offset, size);
/*
* Handle zero-sized whitelist or empty thread_struct, otherwise
* adjust offset to position of thread_struct in task_struct.
*/
if (unlikely(*size == 0))
*offset = 0;
else
*offset += offsetof(struct task_struct, thread);
}
Commit cb7ca40a38 ("x86/fpu: Make task_struct::thread constant size")
removed the logic for the window, leaving:
static inline void
arch_thread_struct_whitelist(unsigned long *offset, unsigned long *size)
{
*offset = 0;
*size = 0;
}
So now there is no window that usercopy hardening will allow to be copied
in/out of task_struct.
But as reported above, there *is* a copy in copy_uabi_to_xstate(). (It
seems there are several, actually.)
int copy_sigframe_from_user_to_xstate(struct task_struct *tsk,
const void __user *ubuf)
{
return copy_uabi_to_xstate(x86_task_fpu(tsk)->fpstate, NULL, ubuf, &tsk->thread.pkru);
}
This appears to be writing into x86_task_fpu(tsk)->fpstate. With or
without CONFIG_X86_DEBUG_FPU, this resolves to:
((struct fpu *)((void *)(task) + sizeof(*(task))))
i.e. the memory "after task_struct" is cast to "struct fpu", and the
uses the "fpstate" pointer. How that pointer gets set looks to be
variable, but I think the one we care about here is:
fpu->fpstate = &fpu->__fpstate;
And struct fpu::__fpstate says:
struct fpstate __fpstate;
/*
* WARNING: '__fpstate' is dynamically-sized. Do not put
* anything after it here.
*/
So we're still dealing with a dynamically sized thing, even if it's not
within the literal struct task_struct -- it's still in the kmem cache,
though.
Looking at the kmem cache size, it has allocated "arch_task_struct_size"
bytes, which is calculated in fpu__init_task_struct_size():
int task_size = sizeof(struct task_struct);
task_size += sizeof(struct fpu);
/*
* Subtract off the static size of the register state.
* It potentially has a bunch of padding.
*/
task_size -= sizeof(union fpregs_state);
/*
* Add back the dynamically-calculated register state
* size.
*/
task_size += fpu_kernel_cfg.default_size;
/*
* We dynamically size 'struct fpu', so we require that
* 'state' be at the end of 'it:
*/
CHECK_MEMBER_AT_END_OF(struct fpu, __fpstate);
arch_task_struct_size = task_size;
So, this is still copying out of the kmem cache for task_struct, and the
window seems unchanged (still fpu regs). This is what the window was
before:
void fpu_thread_struct_whitelist(unsigned long *offset, unsigned long *size)
{
*offset = offsetof(struct thread_struct, fpu.__fpstate.regs);
*size = fpu_kernel_cfg.default_size;
}
And the same commit I mentioned above removed it.
I think the misunderstanding is here:
| The fpu_thread_struct_whitelist() quirk to hardened usercopy can be removed,
| now that the FPU structure is not embedded in the task struct anymore, which
| reduces text footprint a bit.
Yes, FPU is no longer in task_struct, but it IS in the kmem cache named
"task_struct", since the fpstate is still being allocated there.
Partially revert the earlier mentioned commit, along with a
recalculation of the fpstate regs location.
Fixes: cb7ca40a38 ("x86/fpu: Make task_struct::thread constant size")
Reported-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Chang S. Bae <chang.seok.bae@intel.com>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-hardening@vger.kernel.org
Link: https://lore.kernel.org/all/20250409211127.3544993-1-mingo@kernel.org/ # Discussion #1
Link: https://lore.kernel.org/r/202505041418.F47130C4C8@keescook # Discussion #2
Add CRYPTO_ARCH_HAVE_LIB_SHA256_SIMD and a SIMD block function
so that the caller can decide whether to use SIMD.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Export the block functions as GPL only, there is no reason
to let arbitrary modules use these internal functions.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This reverts commit c4741b2305.
Crypto API self-tests no longer run at registration time and now
occur either at late_initcall or upon the first use.
Therefore the premise of the above commit no longer exists. Revert
it and subsequent additions of subsys_initcall and arch_initcall.
Note that lib/crypto calls will stay at subsys_initcall (or rather
downgraded from arch_initcall) because they may need to occur
before Crypto API registration.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Instead of providing crypto_shash algorithms for the arch-optimized
SHA-256 code, instead implement the SHA-256 library. This is much
simpler, it makes the SHA-256 library functions be arch-optimized, and
it fixes the longstanding issue where the arch-optimized SHA-256 was
disabled by default. SHA-256 still remains available through
crypto_shash, but individual architectures no longer need to handle it.
To match sha256_blocks_arch(), change the type of the nblocks parameter
of the assembly functions from int to size_t. The assembly functions
actually already treated it as size_t.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Consolidate the whole logic which determines whether the microcode loader
should be enabled or not into a single function and call it everywhere.
Well, almost everywhere - not in mk_early_pgtbl_32() because there the kernel
is running without paging enabled and checking dis_ucode_ldr et al would
require physical addresses and uglification of the code.
But since this is 32-bit, the easier thing to do is to simply map the initrd
unconditionally especially since that mapping is getting removed later anyway
by zap_early_initrd_mapping() and avoid the uglification.
In doing so, address the issue of old 486er machines without CPUID
support, not booting current kernels.
[ mingo: Fix no previous prototype for ‘microcode_loader_disabled’ [-Wmissing-prototypes] ]
Fixes: 4c585af718 ("x86/boot/32: Temporarily map initrd for microcode loading")
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/CANpbe9Wm3z8fy9HbgS8cuhoj0TREYEEkBipDuhgkWFvqX0UoVQ@mail.gmail.com
Current minimum required version of binutils is 2.25,
which supports PAUSE instruction mnemonic.
Replace "REP; NOP" with this proper mnemonic.
No functional change intended.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: David Laight <david.laight.linux@gmail.com>
Link: https://patch.msgid.link/20250418083436.133148-2-ubizjak@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Rename rep_nop() function to what it really does.
No functional change intended.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: David Laight <david.laight.linux@gmail.com>
Link: https://patch.msgid.link/20250418083436.133148-1-ubizjak@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Nathan reported [1] that when built with clang, the um kernel
crashes pretty much immediately. This turned out to be an issue
with the inline assembly I had added, when clang used %rax/%eax
for both operands. Reorder it so current->thread.segv_continue
is written first, and then the lifetime of _faulted won't have
overlap with the lifetime of segv_continue.
In the email thread Benjamin also pointed out that current->mm
is only NULL for true kernel tasks, but we could do this for a
userspace task, so the current->thread.segv_continue logic must
be lifted out of the mm==NULL check.
Finally, while looking at this, put a barrier() so the NULL
assignment to thread.segv_continue cannot be reorder before
the possibly faulting operation.
Reported-by: Nathan Chancellor <nathan@kernel.org>
Closes: https://lore.kernel.org/r/20250402221254.GA384@ax162 [1]
Fixes: d1d7f01f7c ("um: mark rodata read-only and implement _nofault accesses")
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Now that every architecture provides a block function, use that
to implement the lib/poly1305 and remove the old per-arch code.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Merge mainline to pick up bcachefs poly1305 patch 4bf4b5046d
("bcachefs: use library APIs for ChaCha20 and Poly1305"). This
is a prerequisite for removing the poly1305 shash algorithm.
Most of the SEV support code used to reside in a single C source file
that was included in two places: the core kernel, and the decompressor.
The code that is actually shared with the decompressor was moved into a
separate, shared source file under startup/, on the basis that the
decompressor also executes from the early 1:1 mapping of memory.
However, while the elaborate #VC handling and instruction decoding that
it involves is also performed by the decompressor, it does not actually
occur in the core kernel at early boot, and therefore, does not need to
be part of the confined early startup code.
So split off the #VC handling code and move it back into arch/x86/coco
where it came from, into another C source file that is included from
both the decompressor and the core kernel.
Code movement only - no functional change intended.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-efi@vger.kernel.org
Link: https://lore.kernel.org/r/20250504095230.2932860-31-ardb+git@google.com
running at VMPL >0.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=6nPf
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2025-05-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Ingo Molnar:
"Fix SEV-SNP memory acceptance from the EFI stub for guests
running at VMPL >0"
* tag 'x86-urgent-2025-05-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot/sev: Support memory acceptance in the EFI stub under SVSM
- Require group events for branch counter groups and
PEBS counter snapshotting groups to be x86 events.
- Fix the handling of counter-snapshotting of non-precise
events, where counter values may move backwards a bit,
temporarily, confusing the code.
- Restrict perf/KVM PEBS to guest-owned events.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=F7wJ
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-2025-05-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc perf fixes from Ingo Molnar:
- Require group events for branch counter groups and
PEBS counter snapshotting groups to be x86 events.
- Fix the handling of counter-snapshotting of non-precise
events, where counter values may move backwards a bit,
temporarily, confusing the code.
- Restrict perf/KVM PEBS to guest-owned events.
* tag 'perf-urgent-2025-05-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: KVM: Mask PEBS_ENABLE loaded for guest with vCPU's value.
perf/x86/intel/ds: Fix counter backwards of non-precise events counters-snapshotting
perf/x86/intel: Check the X86 leader for pebs_counter_event_group
perf/x86/intel: Only check the group flag for X86 leader
The SME encryption startup code populates page tables using the ordinary
set_pXX() helpers, and in a PTI build, these will call out to
__pti_set_user_pgtbl() to manipulate the shadow copy of the page tables
for user space.
This is unneeded for the startup code, which only manipulates the
swapper page tables, and so this call could be avoided in this
particular case. So instead of exposing the ordinary
__pti_set_user_pgtblt() to the startup code after its gets confined into
its own symbol space, provide an alternative which just returns pgd,
which is always correct in the startup context.
Annotate it as __weak for now, this will be dropped in a subsequent
patch.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-efi@vger.kernel.org
Link: https://lore.kernel.org/r/20250504095230.2932860-40-ardb+git@google.com
Add aliases for all the data objects that the startup code references -
this is needed so that this code can be moved into its own confined area
where it can only access symbols that have a __pi_ prefix.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-efi@vger.kernel.org
Link: https://lore.kernel.org/r/20250504095230.2932860-39-ardb+git@google.com
Startup code that may execute from the early 1:1 mapping of memory will
be confined into its own address space, and only be permitted to access
ordinary kernel symbols if this is known to be safe.
Introduce a macro helper SYM_PIC_ALIAS() that emits a __pi_ prefixed
alias for a symbol, which allows startup code to access it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-efi@vger.kernel.org
Link: https://lore.kernel.org/r/20250504095230.2932860-38-ardb+git@google.com
As a first step towards disentangling the SEV #VC handling code -which
is shared between the decompressor and the core kernel- from the SEV
startup code, move the decompressor's copy of the instruction decoder
into a separate source file.
Code movement only - no functional change intended.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-efi@vger.kernel.org
Link: https://lore.kernel.org/r/20250504095230.2932860-30-ardb+git@google.com
sev_snp_enabled() is no longer used outside of the source file that
defines it, so make it static and drop the extern declarations.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-efi@vger.kernel.org
Link: https://lore.kernel.org/r/20250504095230.2932860-29-ardb+git@google.com
__supported_pte_mask is statically initialized to U64_MAX and never
assigned until long after the startup code executes that creates the
initial page tables. So applying the mask is unnecessary, and can be
avoided.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-efi@vger.kernel.org
Link: https://lore.kernel.org/r/20250504095230.2932860-27-ardb+git@google.com
Move early_setup_gdt() out of the startup code that is callable from the
1:1 mapping - this is not needed, and instead, it is better to expose
the helper that does reside in __head directly.
This reduces the amount of code that needs special checks for 1:1
execution suitability. In particular, it avoids dealing with the GHCB
page (and its physical address) in startup code, which runs from the
1:1 mapping, making physical to virtual translations ambiguous.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-efi@vger.kernel.org
Link: https://lore.kernel.org/r/20250504095230.2932860-26-ardb+git@google.com
If CONFIG_X86_DEBUG_FPU=Y, arch_exit_to_user_mode_prepare() calls
arch_exit_work() even if ti_work == 0. There only reason is that we
want to call fpregs_assert_state_consistent() if TIF_NEED_FPU_LOAD
is not set.
This looks confusing. arch_exit_to_user_mode_prepare() can just call
fpregs_assert_state_consistent() unconditionally, it depends on
CONFIG_X86_DEBUG_FPU and checks TIF_NEED_FPU_LOAD itself.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Chang S . Bae <chang.seok.bae@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250503143902.GA9012@redhat.com
PF_KTHREAD|PF_USER_WORKER tasks should never clear TIF_NEED_FPU_LOAD,
so the TIF_NEED_FPU_LOAD check should equally filter them out.
And this way an exiting userspace task can avoid the unnecessary "fwait"
if it does context_switch() at least once on its way to exit_thread().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Chang S . Bae <chang.seok.bae@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250503143856.GA9009@redhat.com
It makes no sense to copy the bytes after sizeof(struct task_struct),
FPU state will be initialized in fpu_clone().
A plain memcpy(dst, src, sizeof(struct task_struct)) should work too,
but "_and_pad" looks safer.
[ mingo: Simplify it a bit more. ]
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Chang S . Bae <chang.seok.bae@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250503143850.GA8997@redhat.com
It is not actually used after:
55bc30f2e3 ("x86/fpu: Remove the thread::fpu pointer")
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Chang S . Bae <chang.seok.bae@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250503143837.GA8985@redhat.com
Now that switch_fpu_finish() doesn't load the FPU state, it makes more
sense to fold it into switch_fpu_prepare() renamed to switch_fpu(), and
more importantly, use the "prev_p" task as a target for TIF_NEED_FPU_LOAD.
It doesn't make any sense to delay set_tsk_thread_flag(TIF_NEED_FPU_LOAD)
until "prev_p" is scheduled again.
There is no worry about the very first context switch, fpu_clone() must
always set TIF_NEED_FPU_LOAD.
Also, shift the test_tsk_thread_flag(TIF_NEED_FPU_LOAD) from the callers
to switch_fpu().
Note that the "PF_KTHREAD | PF_USER_WORKER" check can be removed but
this deserves a separate patch which can change more functions, say,
kernel_fpu_begin_mask().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Chang S . Bae <chang.seok.bae@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250503143830.GA8982@redhat.com
Commit:
d54d610243 ("x86/boot/sev: Avoid shared GHCB page for early memory acceptance")
provided a fix for SEV-SNP memory acceptance from the EFI stub when
running at VMPL #0. However, that fix was insufficient for SVSM SEV-SNP
guests running at VMPL >0, as those rely on a SVSM calling area, which
is a shared buffer whose address is programmed into a SEV-SNP MSR, and
the SEV init code that sets up this calling area executes much later
during the boot.
Given that booting via the EFI stub at VMPL >0 implies that the firmware
has configured this calling area already, reuse it for performing memory
acceptance in the EFI stub.
Fixes: fcd042e864 ("x86/sev: Perform PVALIDATE using the SVSM when not at VMPL0")
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Co-developed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: <stable@vger.kernel.org>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Cc: linux-efi@vger.kernel.org
Link: https://lore.kernel.org/r/20250428174322.2780170-2-ardb+git@google.com
When changing memory attributes on a subset of a potential hugepage, add
the hugepage to the invalidation range tracking to prevent installing a
hugepage until the attributes are fully updated. Like the actual hugepage
tracking updates in kvm_arch_post_set_memory_attributes(), process only
the head and tail pages, as any potential hugepages that are entirely
covered by the range will already be tracked.
Note, only hugepage chunks whose current attributes are NOT mixed need to
be added to the invalidation set, as mixed attributes already prevent
installing a hugepage, and it's perfectly safe to install a smaller
mapping for a gfn whose attributes aren't changing.
Fixes: 8dd2eee9d5 ("KVM: x86/mmu: Handle page fault for private memory")
Cc: stable@vger.kernel.org
Reported-by: Michael Roth <michael.roth@amd.com>
Tested-by: Michael Roth <michael.roth@amd.com>
Link: https://lore.kernel.org/r/20250430220954.522672-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Commit 4e15a0ddc3 ("KVM: SEV: snapshot the GHCB before accessing it")
updated the SEV code to take a snapshot of the GHCB before using it. But
the dump_ghcb() function wasn't updated to use the snapshot locations.
This results in incorrect output from dump_ghcb() for the "is_valid" and
"valid_bitmap" fields.
Update dump_ghcb() to use the proper locations.
Fixes: 4e15a0ddc3 ("KVM: SEV: snapshot the GHCB before accessing it")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Link: https://lore.kernel.org/r/8f03878443681496008b1b37b7c4bf77a342b459.1745866531.git.thomas.lendacky@amd.com
[sean: add comment and snapshot qualifier]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Eliminate a lot of stub definitions by using macros to define the TDX vs
non-TDX versions of various x86_ops. Moving the x86_ops wrappers under
CONFIG_KVM_INTEL_TDX also allows nearly all of vmx/main.c to go under a
single #ifdef, eliminating trampolines in the generated code, and almost
all of the stubs.
For example, with CONFIG_KVM_INTEL_TDX=n, before this cleanup,
vt_refresh_apicv_exec_ctrl() would produce:
0000000000036490 <vt_refresh_apicv_exec_ctrl>:
36490: f3 0f 1e fa endbr64
36494: e8 00 00 00 00 call 36499 <vt_refresh_apicv_exec_ctrl+0x9>
36495: R_X86_64_PLT32 __fentry__-0x4
36499: e9 00 00 00 00 jmp 3649e <vt_refresh_apicv_exec_ctrl+0xe>
3649a: R_X86_64_PLT32 vmx_refresh_apicv_exec_ctrl-0x4
3649e: 66 90 xchg %ax,%ax
After this patch, this is completely eliminated.
Based on a patch by Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/kvm/Z6v9yjWLNTU6X90d@google.com/
Cc: Sean Christopherson <seanjc@google.com>
Cc: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/20250318-vverma7-cleanup_x86_ops-v2-4-701e82d6b779@intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Define kvm_complete_insn_gp() as vmx_complete_emulated_msr() and use the
glue wrapper in vt_complete_emulated_msr() so that VT's
.complete_emulated_msr() implementation follows the soon-to-be-standard
pattern of:
vt_abc:
if (is_td())
return tdx_abc();
return vmx_abc();
This will allow generating such wrappers via a macro, which in turn will
make it trivially easy to skip the wrappers entirely when KVM_INTEL_TDX=n.
Suggested-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/kvm/Z6v9yjWLNTU6X90d@google.com/
Cc: Sean Christopherson <seanjc@google.com>
Cc: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/20250318-vverma7-cleanup_x86_ops-v2-3-701e82d6b779@intel.com
[sean: massage shortlog+changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
In preparation for a cleanup of the kvm_x86_ops struct for TDX, all vt_*
functions are expected to act as glue functions that route to either tdx_*
or vmx_* based on the VM type. Specifically, the pattern is:
vt_abc:
if (is_td())
return tdx_abc();
return vmx_abc();
But vt_apicv_pre_state_restore() does not follow this pattern. To
facilitate that cleanup, rename and move vt_apicv_pre_state_restore() into
posted_intr.c.
Opportunistically turn vcpu_to_pi_desc() back into a static function, as
the only reason it was exposed outside of posted_intr.c was for
vt_apicv_pre_state_restore().
No functional change intended.
Suggested-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/kvm/Z6v9yjWLNTU6X90d@google.com/
Cc: Sean Christopherson <seanjc@google.com>
Cc: Rick Edgecombe <rick.p.edgecombe@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@linxu.intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/20250318-vverma7-cleanup_x86_ops-v2-2-701e82d6b779@intel.com
[sean: apply Chao's suggestions, massage shortlog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Restore KVM's handling of a NULL kvm_x86_ops.mem_enc_ioctl, as the hook is
NULL on SVM when CONFIG_KVM_AMD_SEV=n, and TDX will soon follow suit.
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at arch/x86/include/asm/kvm-x86-ops.h:130 kvm_x86_vendor_init+0x178b/0x18e0
Modules linked in:
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.15.0-rc2-dc1aead1a985-sink-vm #2 NONE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:kvm_x86_vendor_init+0x178b/0x18e0
Call Trace:
<TASK>
svm_init+0x2e/0x60
do_one_initcall+0x56/0x290
kernel_init_freeable+0x192/0x1e0
kernel_init+0x16/0x130
ret_from_fork+0x30/0x50
ret_from_fork_asm+0x1a/0x30
</TASK>
---[ end trace 0000000000000000 ]---
Opportunistically drop the superfluous curly braces.
Link: https://lore.kernel.org/all/20250318-vverma7-cleanup_x86_ops-v2-4-701e82d6b779@intel.com
Fixes: b2aaf38ced ("KVM: TDX: Add place holder for TDX VM specific mem_enc_op ioctl")
Link: https://lore.kernel.org/r/20250502203421.865686-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Extend the SEV library to include support for SNP ioctl() wrappers,
which aid in launching and interacting with a SEV-SNP guest.
Signed-off-by: Pratik R. Sampat <prsampat@amd.com>
Link: https://lore.kernel.org/r/20250305230000.231025-8-prsampat@amd.com
[sean: use BIT()]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Modify the function type of native_read_msr_safe() to:
int native_read_msr_safe(u32 msr, u64 *val)
This change makes the function return an error code instead of the
MSR value, aligning it with the type of native_write_msr_safe().
Consequently, their callers can check the results in the same way.
While at it, convert leftover MSR data type "unsigned int" to u32.
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Uros Bizjak <ubizjak@gmail.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20250427092027.1598740-16-xin@zytor.com
The third argument in wrmsr(msr, low, 0) is unnecessary. Instead, use
wrmsrq(msr, low), which automatically sets the higher 32 bits of the
MSR value to 0.
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Uros Bizjak <ubizjak@gmail.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20250427092027.1598740-15-xin@zytor.com
An MSR value is represented as a 64-bit unsigned integer, with existing
MSR instructions storing it in EDX:EAX as two 32-bit segments.
The new immediate form MSR instructions, however, utilize a 64-bit
general-purpose register to store the MSR value. To unify the usage of
all MSR instructions, let the default MSR access APIs accept an MSR
value as a single 64-bit argument instead of two 32-bit segments.
The dual 32-bit APIs are still available as convenient wrappers over the
APIs that handle an MSR value as a single 64-bit argument.
The following illustrates the updated derivation of the MSR write APIs:
__wrmsrq(u32 msr, u64 val)
/ \
/ \
native_wrmsrq(msr, val) native_wrmsr(msr, low, high)
|
|
native_write_msr(msr, val)
/ \
/ \
wrmsrq(msr, val) wrmsr(msr, low, high)
When CONFIG_PARAVIRT is enabled, wrmsrq() and wrmsr() are defined on top
of paravirt_write_msr():
paravirt_write_msr(u32 msr, u64 val)
/ \
/ \
wrmsrq(msr, val) wrmsr(msr, low, high)
paravirt_write_msr() invokes cpu.write_msr(msr, val), an indirect layer
of pv_ops MSR write call:
If on native:
cpu.write_msr = native_write_msr
If on Xen:
cpu.write_msr = xen_write_msr
Therefore, refactor pv_cpu_ops.write_msr{_safe}() to accept an MSR value
in a single u64 argument, replacing the current dual u32 arguments.
No functional change intended.
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Uros Bizjak <ubizjak@gmail.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20250427092027.1598740-14-xin@zytor.com
set_seg() is used to write the following MSRs on Xen:
MSR_FS_BASE
MSR_KERNEL_GS_BASE
MSR_GS_BASE
But none of these MSRs are written using any MSR write safe API.
Therefore there is no need to pass an error pointer argument to
set_seg() for returning an error code to be used in MSR safe APIs.
Remove the error pointer argument.
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Uros Bizjak <ubizjak@gmail.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20250427092027.1598740-13-xin@zytor.com
As pmu_msr_{read,write}() are now wrappers of pmu_msr_chk_emulated(),
remove them and use pmu_msr_chk_emulated() directly.
As pmu_msr_chk_emulated() could easily return false in the cases where
it would set *emul to false, remove the "emul" argument and use the
return value instead.
While at it, convert the data type of MSR index to u32 in functions
called in pmu_msr_chk_emulated().
Suggested-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Suggested-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Uros Bizjak <ubizjak@gmail.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20250427092027.1598740-12-xin@zytor.com
hpa found that pmu_msr_write() is actually a completely pointless
function:
https://lore.kernel.org/lkml/0ec48b84-d158-47c6-b14c-3563fd14bcc4@zytor.com/
all it does is shuffle some arguments, then calls pmu_msr_chk_emulated()
and if it returns true AND the emulated flag is clear then does
*exactly the same thing* that the calling code would have done if
pmu_msr_write() itself had returned true.
And pmu_msr_read() does the equivalent stupidity.
Remove the calls to native_{read,write}_msr{,_safe}() within
pmu_msr_{read,write}(). Instead reuse the existing calling code
that decides whether to call native_{read,write}_msr{,_safe}() based
on the return value from pmu_msr_{read,write}(). Consequently,
eliminate the need to pass an error pointer to pmu_msr_{read,write}().
While at it, refactor pmu_msr_write() to take the MSR value as a u64
argument, replacing the current dual u32 arguments, because the dual
u32 arguments were only used to call native_write_msr{,_safe}(), which
has now been removed.
Suggested-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Uros Bizjak <ubizjak@gmail.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20250427092027.1598740-11-xin@zytor.com
__rdmsr() is the lowest level MSR write API, with native_rdmsr()
and native_rdmsrq() serving as higher-level wrappers around it.
#define native_rdmsr(msr, val1, val2) \
do { \
u64 __val = __rdmsr((msr)); \
(void)((val1) = (u32)__val); \
(void)((val2) = (u32)(__val >> 32)); \
} while (0)
static __always_inline u64 native_rdmsrq(u32 msr)
{
return __rdmsr(msr);
}
However, __rdmsr() continues to be utilized in various locations.
MSR APIs are designed for different scenarios, such as native or
pvops, with or without trace, and safe or non-safe. Unfortunately,
the current MSR API names do not adequately reflect these factors,
making it challenging to select the most appropriate API for
various situations.
To pave the way for improving MSR API names, convert __rdmsr()
uses to native_rdmsrq() to ensure consistent usage. Later, these
APIs can be renamed to better reflect their implications, such as
native or pvops, with or without trace, and safe or non-safe.
No functional change intended.
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Uros Bizjak <ubizjak@gmail.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20250427092027.1598740-10-xin@zytor.com
__rdmsr() is the lowest-level primitive MSR read API, implemented in
assembly code and returning an MSR value in a u64 integer, on top of
which a convenience wrapper native_rdmsr() is defined to return an MSR
value in two u32 integers. For some reason, native_rdmsrq() is not
defined and __rdmsr() is directly used when it needs to return an MSR
value in a u64 integer.
Add the native_rdmsrq() helper, which is simply an alias of __rdmsr(),
to make native_rdmsr() and native_rdmsrq() a pair of MSR read APIs.
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Uros Bizjak <ubizjak@gmail.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20250427092027.1598740-9-xin@zytor.com
__wrmsr() is the lowest level MSR write API, with native_wrmsr()
and native_wrmsrq() serving as higher-level wrappers around it:
#define native_wrmsr(msr, low, high) \
__wrmsr(msr, low, high)
#define native_wrmsrl(msr, val) \
__wrmsr((msr), (u32)((u64)(val)), \
(u32)((u64)(val) >> 32))
However, __wrmsr() continues to be utilized in various locations.
MSR APIs are designed for different scenarios, such as native or
pvops, with or without trace, and safe or non-safe. Unfortunately,
the current MSR API names do not adequately reflect these factors,
making it challenging to select the most appropriate API for
various situations.
To pave the way for improving MSR API names, convert __wrmsr()
uses to native_wrmsr{,q}() to ensure consistent usage. Later,
these APIs can be renamed to better reflect their implications,
such as native or pvops, with or without trace, and safe or
non-safe.
No functional change intended.
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Uros Bizjak <ubizjak@gmail.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20250427092027.1598740-8-xin@zytor.com
Functions offer type safety and better readability compared to macros.
Additionally, always inline functions can match the performance of
macros. Converting the rdpmc() macro into an always inline function
is simple and straightforward, so just make the change.
Moreover, the read result is now the returned value, further enhancing
readability.
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Link: https://lore.kernel.org/r/20250427092027.1598740-6-xin@zytor.com
Relocate rdtsc{,_ordered}() from <asm/msr.h> to <asm/tsc.h>.
[ mingo: Do not remove the <asm/tsc.h> inclusion from <asm/msr.h>
just yet, to reduce -next breakages. We can do this later
on, separately, shortly before the next -rc1. ]
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Link: https://lore.kernel.org/r/20250427092027.1598740-3-xin@zytor.com
For historic reasons there are some TSC-related functions in the
<asm/msr.h> header, even though there's an <asm/tsc.h> header.
To facilitate the relocation of rdtsc{,_ordered}() from <asm/msr.h>
to <asm/tsc.h> and to eventually eliminate the inclusion of
<asm/msr.h> in <asm/tsc.h>, add an explicit <asm/msr.h> dependency
to the source files that reference definitions from <asm/msr.h>.
[ mingo: Clarified the changelog. ]
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Link: https://lore.kernel.org/r/20250501054241.1245648-1-xin@zytor.com
We are going to use them from multiple headers, and in any case,
such register access wrapper macros are better in <asm/asm.h>
anyway.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Cc: linux-kernel@vger.kernel.org
DECLARE_ARGS() is way too generic of a name that says very little about
why these args are declared in that fashion - use the EAX_EDX_ prefix
to create a common prefix between the three helper methods:
EAX_EDX_DECLARE_ARGS()
EAX_EDX_VAL()
EAX_EDX_RET()
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Cc: linux-kernel@vger.kernel.org
17 years ago, Venki suggested [1] "A future improvement would be to
avoid the range_is_allowed duplication".
The only thing preventing a common implementation is that
phys_mem_access_prot_allowed() expects the range check to exit
immediately when PAT is disabled [2]. I.e. there is no cache conflict to
manage in that case. This cleanup was noticed on the path to
considering changing range_is_allowed() policy to blanket deny /dev/mem
for private (confidential computing) memory.
Note, however that phys_mem_access_prot_allowed() has long since stopped
being relevant for managing cache-type validation due to [3], and [4].
Commit 0124cecfc8 ("x86, PAT: disable /dev/mem mmap RAM with PAT") [1]
Commit 9e41bff270 ("x86: fix /dev/mem mmap breakage when PAT is disabled") [2]
Commit 1886297ce0 ("x86/mm/pat: Fix BUG_ON() in mmap_mem() on QEMU/i386") [3]
Commit 0c3c8a1836 ("x86, PAT: Remove duplicate memtype reserve in devmem mmap") [4]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/all/20250430024622.1134277-2-dan.j.williams%40intel.com
strcpy() is deprecated due to issues with bounds checking and overflows.
Replace it with strscpy().
Signed-off-by: Ruben Wauters <rubenru09@aol.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250429230710.54014-1-rubenru09@aol.com
After
6f059e634dcd("x86/microcode: Clarify the late load logic"),
if the load is up-to-date, the AMD side returns UCODE_OK which leads to
load_late_locked() returning -EBADFD.
Handle UCODE_OK in the switch case to avoid this error.
[ bp: Massage commit message. ]
Fixes: 6f059e634d ("x86/microcode: Clarify the late load logic")
Signed-off-by: Annie Li <jiayanli@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250430053424.77438-1-jiayanli@google.com
When generating the MSR_IA32_PEBS_ENABLE value that will be loaded on
VM-Entry to a KVM guest, mask the value with the vCPU's desired PEBS_ENABLE
value. Consulting only the host kernel's host vs. guest masks results in
running the guest with PEBS enabled even when the guest doesn't want to use
PEBS. Because KVM uses perf events to proxy the guest virtual PMU, simply
looking at exclude_host can't differentiate between events created by host
userspace, and events created by KVM on behalf of the guest.
Running the guest with PEBS unexpectedly enabled typically manifests as
crashes due to a near-infinite stream of #PFs. E.g. if the guest hasn't
written MSR_IA32_DS_AREA, the CPU will hit page faults on address '0' when
trying to record PEBS events.
The issue is most easily reproduced by running `perf kvm top` from before
commit 7b100989b4 ("perf evlist: Remove __evlist__add_default") (after
which, `perf kvm top` effectively stopped using PEBS). The userspace side
of perf creates a guest-only PEBS event, which intel_guest_get_msrs()
misconstrues a guest-*owned* PEBS event.
Arguably, this is a userspace bug, as enabling PEBS on guest-only events
simply cannot work, and userspace can kill VMs in many other ways (there
is no danger to the host). However, even if this is considered to be bad
userspace behavior, there's zero downside to perf/KVM restricting PEBS to
guest-owned events.
Note, commit 854250329c ("KVM: x86/pmu: Disable guest PEBS temporarily
in two rare situations") fixed the case where host userspace is profiling
KVM *and* userspace, but missed the case where userspace is profiling only
KVM.
Fixes: c59a1f106f ("KVM: x86/pmu: Add IA32_PEBS_ENABLE MSR emulation for extended PEBS")
Closes: https://lore.kernel.org/all/Z_VUswFkWiTYI0eD@do-x1carbon
Reported-by: Seth Forshee <sforshee@kernel.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Tested-by: "Seth Forshee (DigitalOcean)" <sforshee@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250426001355.1026530-1-seanjc@google.com
Restructure SRSO to use select/update/apply functions to create
consistent vulnerability handling. Like with retbleed, the command line
options directly select mitigations which can later be modified.
While at it, remove a comment which doesn't apply anymore due to the
changed mitigation detection flow.
Signed-off-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/20250418161721.1855190-17-david.kaplan@amd.com
Restructure L1TF to use select/apply functions to create consistent
vulnerability handling.
Define new AUTO mitigation for L1TF.
Signed-off-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/20250418161721.1855190-16-david.kaplan@amd.com
Restructure SSB to use select/apply functions to create consistent
vulnerability handling.
Remove __ssb_select_mitigation() and split the functionality between the
select/apply functions.
Signed-off-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/20250418161721.1855190-15-david.kaplan@amd.com
Restructure spectre_v2 to use select/update/apply functions to create
consistent vulnerability handling.
The spectre_v2 mitigation may be updated based on the selected retbleed
mitigation.
Signed-off-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/20250418161721.1855190-14-david.kaplan@amd.com
Restructure BHI mitigation to use select/update/apply functions to create
consistent vulnerability handling. BHI mitigation was previously selected
from within spectre_v2_select_mitigation() and now is selected from
cpu_select_mitigation() like with all others.
Define new AUTO mitigation for BHI.
Signed-off-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/20250418161721.1855190-13-david.kaplan@amd.com
Restructure spectre_v2_user to use select/update/apply functions to
create consistent vulnerability handling.
The IBPB/STIBP choices are first decided based on the spectre_v2_user
command line but can be modified by the spectre_v2 command line option
as well.
Signed-off-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/20250418161721.1855190-12-david.kaplan@amd.com
Both SVM and VMX have similar implementation for executing an IBPB
between running different vCPUs on the same CPU to create separate
prediction domains for different vCPUs.
For VMX, when the currently loaded VMCS is changed in
vmx_vcpu_load_vmcs(), an IBPB is executed if there is no 'buddy', which
is the case on vCPU load. The intention is to execute an IBPB when
switching vCPUs, but not when switching the VMCS within the same vCPU.
Executing an IBPB on nested transitions within the same vCPU is handled
separately and conditionally in nested_vmx_vmexit().
For SVM, the current VMCB is tracked on vCPU load and an IBPB is
executed when it is changed. The intention is also to execute an IBPB
when switching vCPUs, although it is possible that in some cases an IBBP
is executed when switching VMCBs for the same vCPU. Executing an IBPB on
nested transitions should be handled separately, and is proposed at [1].
Unify the logic by tracking the last loaded vCPU and execuintg the IBPB
on vCPU change in kvm_arch_vcpu_load() instead. When a vCPU is
destroyed, make sure all references to it are removed from any CPU. This
is similar to how SVM clears the current_vmcb tracking on vCPU
destruction. Remove the current VMCB tracking in SVM as it is no longer
required, as well as the 'buddy' parameter to vmx_vcpu_load_vmcs().
[1] https://lore.kernel.org/lkml/20250221163352.3818347-4-yosry.ahmed@linux.dev
Link: https://lore.kernel.org/all/20250320013759.3965869-1-yosry.ahmed@linux.dev
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
[sean: tweak comment to stay at/under 80 columns]
Signed-off-by: Sean Christopherson <seanjc@google.com>
When freeing a vCPU and thus its VMCB, clear current_vmcb for all possible
CPUs, not just online CPUs, as it's theoretically possible a CPU could go
offline and come back online in conjunction with KVM reusing the page for
a new VMCB.
Link: https://lore.kernel.org/all/20250320013759.3965869-1-yosry.ahmed@linux.dev
Fixes: fd65d3142f ("kvm: svm: Ensure an IBPB on all affected CPUs when freeing a vmcb")
Cc: stable@vger.kernel.org
Cc: Jim Mattson <jmattson@google.com>
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
[sean: split to separate patch, write changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Restructure retbleed mitigation to use select/update/apply functions to create
consistent vulnerability handling. The retbleed_update_mitigation()
simplifies the dependency between spectre_v2 and retbleed.
The command line options now directly select a preferred mitigation
which simplifies the logic.
Signed-off-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/20250418161721.1855190-11-david.kaplan@amd.com
This user of SHA-256 does not support any other algorithm, so the
crypto_shash abstraction provides no value. Just use the SHA-256
library API instead, which is much simpler and easier to use.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20250428183838.799333-1-ebiggers%40kernel.org
Some variables allocated in sev_send_update_data are released when
the function exits, so there is no need to set GFP_KERNEL_ACCOUNT.
Signed-off-by: Peng Hao <flyingpeng@tencent.com>
Link: https://lore.kernel.org/r/20250428063013.62311-1-flyingpeng@tencent.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Check request KVM_REQ_MMU_FREE_OBSOLETE_ROOTS to free obsolete roots in
kvm_mmu_reload() to prevent kvm_mmu_reload() from seeing a stale obsolete
root.
Since kvm_mmu_reload() can be called outside the
vcpu_enter_guest() path (e.g., kvm_arch_vcpu_pre_fault_memory()), it may be
invoked after a root has been marked obsolete and before vcpu_enter_guest()
is invoked to process KVM_REQ_MMU_FREE_OBSOLETE_ROOTS and set root.hpa to
invalid. This causes kvm_mmu_reload() to fail to load a new root, which
can lead to kvm_arch_vcpu_pre_fault_memory() being stuck in the while
loop in kvm_tdp_map_page() since RET_PF_RETRY is always returned due to
is_page_fault_stale().
Keep the existing check of KVM_REQ_MMU_FREE_OBSOLETE_ROOTS in
vcpu_enter_guest() since the cost of kvm_check_request() is negligible,
especially a check that's guarded by kvm_request_pending().
Export symbol of kvm_mmu_free_obsolete_roots() as kvm_mmu_reload() is
inline and may be called outside of kvm.ko.
Fixes: 6e01b7601d ("KVM: x86: Implement kvm_arch_vcpu_pre_fault_memory()")
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Link: https://lore.kernel.org/r/20250318013333.5817-1-yan.y.zhao@intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Warn if PFN changes on shadow-present SPTE in mmu_set_spte().
KVM should _never_ change the PFN of a shadow-present SPTE. In
mmu_set_spte(), there is a WARN_ON_ONCE() on pfn changes on shadow-present
SPTE in mmu_spte_update() to detect this condition. However, that
WARN_ON_ONCE() is not hittable since mmu_set_spte() invokes drop_spte()
earlier before mmu_spte_update(), which clears SPTE to a !shadow-present
state. So, before invoking drop_spte(), add a WARN_ON_ONCE() in
mmu_set_spte() to warn PFN change of a shadow-present SPTE.
For the spurious prefetch fault, only return RET_PF_SPURIOUS directly when
PFN is not changed. When PFN changes, fall through to follow the sequence
of drop_spte(), warn of PFN change, make_spte(), flush tlb, rmap_add().
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Link: https://lore.kernel.org/r/20250318013310.5781-1-yan.y.zhao@intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a WARN() to assert that KVM does _not_ change the PFN of a
shadow-present SPTE during spurious fault handling.
KVM should _never_ change the PFN of a shadow-present SPTE and TDP MMU
already BUG()s on this. However, spurious faults just return early before
the existing BUG() could be hit.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Link: https://lore.kernel.org/r/20250318013238.5732-1-yan.y.zhao@intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Combine prefetch and is_access_allowed() checks into a unified path to
detect spurious faults, since both cases now share identical logic.
No functional changes.
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Link: https://lore.kernel.org/r/20250318013210.5701-1-yan.y.zhao@intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Instead of simply treating a prefetch fault as spurious when there's a
shadow-present old SPTE, further check if the old SPTE is leaf to determine
if a prefetch fault is spurious.
It's not reasonable to treat a prefetch fault as spurious when there's a
shadow-present non-leaf SPTE without a corresponding shadow-present leaf
SPTE. e.g., in the following sequence, a prefetch fault should not be
considered spurious:
1. add a memslot with size 4K
2. prefault GPA A in the memslot
3. delete the memslot (zap all disabled)
4. re-add the memslot with size 2M
5. prefault GPA A again.
In step 5, the prefetch fault attempts to install a 2M huge entry.
Since step 3 zaps the leaf SPTE for GPA A while keeping the non-leaf SPTE,
the leaf entry will remain empty after step 5 if the fetch fault is
regarded as spurious due to a shadow-present non-leaf SPTE.
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Link: https://lore.kernel.org/r/20250318013111.5648-1-yan.y.zhao@intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Ensure the shadow VMCS cache is evicted during an emergency reboot to
prevent potential memory corruption if the cache is evicted after reboot.
This issue was identified through code inspection, as __loaded_vmcs_clear()
flushes both the normal VMCS and the shadow VMCS.
Avoid checking the "launched" state during an emergency reboot, unlike the
behavior in __loaded_vmcs_clear(). This is important because reboot NMIs
can interfere with operations like copy_shadow_to_vmcs12(), where shadow
VMCSes are loaded directly using VMPTRLD. In such cases, if NMIs occur
right after the VMCS load, the shadow VMCSes will be active but the
"launched" state may not be set.
Fixes: 16f5b9034b ("KVM: nVMX: Copy processor-specific shadow-vmcs to VMCS12")
Cc: stable@vger.kernel.org
Signed-off-by: Chao Gao <chao.gao@intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20250324140849.2099723-1-chao.gao@intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Stop ignoring DEBUGCTL[5:2] on AMD CPUs and instead treat them as reserved.
KVM has never properly virtualized AMD's legacy PBi bits, but did allow
the guest (and host userspace) to set the bits. To avoid breaking guests
when running on CPUs with BusLockTrap, which redefined bit 2 to BLCKDB and
made bits 5:3 reserved, a previous KVM change ignored bits 5:3, e.g. so
that legacy guest software wouldn't inadvertently enable BusLockTrap or
hit a VMRUN failure due to setting reserved.
To allow for virtualizing BusLockTrap and whatever future features may use
bits 5:3, treat bits 5:2 as reserved (and hope that doing so doesn't break
any existing guests).
Reviewed-and-tested-by: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20250227222411.3490595-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
The retbleed=stuff mitigation is only applicable for Intel CPUs affected
by retbleed. If this option is selected for another vendor, print a
warning and fall back to the AUTO option.
Signed-off-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/20250418161721.1855190-10-david.kaplan@amd.com
The use of the term "glue" in filenames is a Crypto API-ism that rarely
shows up elsewhere in lib/ or arch/*/lib/. I think adopting it there
was a mistake. The library just uses standard functions, so the amount
of code that could be considered "glue" is quite small. And while often
the C functions just wrap the assembly functions, there are also cases
like crc32c_arch() in arch/x86/lib/crc32-glue.c that blur the line by
in-lining the actual implementation into the C function. That's not
"glue code", but rather the actual code.
Therefore, let's drop "glue" from the filenames and instead use e.g.
crc32.c instead of crc32-glue.c.
Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250424002038.179114-8-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
All of the CRC library's CPU feature static_keys are initialized by
initcalls and never change afterwards, so there's no need for them to be
in the regular .data section. Put them in .data..ro_after_init instead.
Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com> # s390
Link: https://lore.kernel.org/r/20250413154350.10819-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Restructure GDS mitigation to use select/apply functions to create
consistent vulnerability handling.
Define new AUTO mitigation for GDS.
Signed-off-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/20250418161721.1855190-8-david.kaplan@amd.com
Restructure SRBDS to use select/apply functions to create consistent
vulnerability handling.
Define new AUTO mitigation for SRBDS.
Signed-off-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/20250418161721.1855190-7-david.kaplan@amd.com
The functionality in md_clear_update_mitigation() and
md_clear_select_mitigation() is now integrated into the select/update
functions for the MDS, TAA, MMIO, and RFDS vulnerabilities.
Signed-off-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/20250418161721.1855190-6-david.kaplan@amd.com
Restructure RFDS mitigation to use select/update/apply functions to
create consistent vulnerability handling.
[ bp: Rename the oneline helper to what it checks. ]
Signed-off-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/20250418161721.1855190-5-david.kaplan@amd.com
Now that the architecture-optimized Poly1305 kconfig symbols are defined
regardless of CRYPTO, there is no need for CRYPTO_LIB_POLY1305 to select
CRYPTO. So, remove that. This makes the indirection through the
CRYPTO_LIB_POLY1305_INTERNAL symbol unnecessary, so get rid of that and
just use CRYPTO_LIB_POLY1305 directly. Finally, make the fallback to
the generic implementation use a default value instead of a select; this
makes it consistent with how the arch-optimized code gets enabled and
also with how CRYPTO_LIB_BLAKE2S_GENERIC gets enabled.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that the architecture-optimized ChaCha kconfig symbols are defined
regardless of CRYPTO, there is no need for CRYPTO_LIB_CHACHA to select
CRYPTO. So, remove that. This makes the indirection through the
CRYPTO_LIB_CHACHA_INTERNAL symbol unnecessary, so get rid of that and
just use CRYPTO_LIB_CHACHA directly. Finally, make the fallback to the
generic implementation use a default value instead of a select; this
makes it consistent with how the arch-optimized code gets enabled and
also with how CRYPTO_LIB_BLAKE2S_GENERIC gets enabled.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Continue disentangling the crypto library functions from the generic
crypto infrastructure by moving the x86 BLAKE2s, ChaCha, and Poly1305
library functions into a new directory arch/x86/lib/crypto/ that does
not depend on CRYPTO. This mirrors the distinction between crypto/ and
lib/crypto/.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
arch/x86/crypto/Kconfig is sourced only when CONFIG_X86=y, so there is
no need for the symbols defined inside it to depend on X86.
In the case of CRYPTO_TWOFISH_586 and CRYPTO_TWOFISH_X86_64, the
dependency was actually on '(X86 || UML_X86)', which suggests that these
two symbols were intended to be available under user-mode Linux as well.
Yet, again these symbols were defined only when CONFIG_X86=y, so that
was not the case. Just remove this redundant dependency.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Restructure MDS mitigation selection to use select/update/apply
functions to create consistent vulnerability handling.
[ bp: rename and beef up comment over VERW mitigation selected var for
maximum clarity. ]
Signed-off-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/20250418161721.1855190-2-david.kaplan@amd.com
- Fix 32-bit kernel boot crash if passed physical
memory with more than 32 address bits
- Fix Xen PV crash
- Work around build bug in certain limited build environments
- Fix CTEST instruction decoding in insn_decoder_test
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=DbEx
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2025-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 fixes from Ingo Molnar:
- Fix 32-bit kernel boot crash if passed physical memory with more than
32 address bits
- Fix Xen PV crash
- Work around build bug in certain limited build environments
- Fix CTEST instruction decoding in insn_decoder_test
* tag 'x86-urgent-2025-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/insn: Fix CTEST instruction decoding
x86/boot: Work around broken busybox 'truncate' tool
x86/mm: Fix _pgd_alloc() for Xen PV mode
x86/e820: Discard high memory that can't be addressed by 32-bit systems
- Use POLLERR for events in error state, instead of
the ambiguous POLLHUP error value
- Fix non-sampling (counting) events on certain x86 platforms
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=LLOs
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-2025-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc perf events fixes from Ingo Molnar:
- Use POLLERR for events in error state, instead of the ambiguous
POLLHUP error value
- Fix non-sampling (counting) events on certain x86 platforms
* tag 'perf-urgent-2025-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86: Fix non-sampling (counting) events on certain x86 platforms
perf/core: Change to POLLERR for pinned events with error
The s2idle MMIO quirk uses a scratch register in the FCH.
Adjust the code to clarify that.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Cc: Yazen Ghannam <yazen.ghannam@amd.com>
Cc: platform-driver-x86@vger.kernel.org
Link: https://lore.kernel.org/r/20250422234830.2840784-5-superm1@kernel.org
SB800_PIIX4_FCH_PM_ADDR is used to indicate the base address for the
FCH PM registers. Multiple drivers may need this base address, so
move related defines to a common header location and rename them
accordingly.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Sanket Goswami <Sanket.Goswami@amd.com>
Cc: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Cc: Yazen Ghannam <yazen.ghannam@amd.com>
Cc: linux-i2c@vger.kernel.org
Link: https://lore.kernel.org/r/20250422234830.2840784-4-superm1@kernel.org
When retpoline is enabled, indirect function calls introduce additional
performance overhead. Avoid frequent indirect calls to VMGEXIT when SEV
is enabled.
Signed-off-by: Peng Hao <flyingpeng@tencent.com>
Link: https://lore.kernel.org/r/20250306075425.66693-1-flyingpeng@tencent.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
AMD EPYC 5th generation processors have introduced a feature that allows
the hypervisor to control the SEV_FEATURES that are set for, or by, a
guest [1]. ALLOWED_SEV_FEATURES can be used by the hypervisor to enforce
that SEV-ES and SEV-SNP guests cannot enable features that the
hypervisor does not want to be enabled.
Always enable ALLOWED_SEV_FEATURES. A VMRUN will fail if any
non-reserved bits are 1 in SEV_FEATURES but are 0 in
ALLOWED_SEV_FEATURES.
Some SEV_FEATURES - currently PmcVirtualization and SecureAvic
(see Appendix B, Table B-4) - require an opt-in via ALLOWED_SEV_FEATURES,
i.e. are off-by-default, whereas all other features are effectively
on-by-default, but still honor ALLOWED_SEV_FEATURES.
[1] Section 15.36.20 "Allowed SEV Features", AMD64 Architecture
Programmer's Manual, Pub. 24593 Rev. 3.42 - March 2024:
https://bugzilla.kernel.org/attachment.cgi?id=306250
Co-developed-by: Kishon Vijay Abraham I <kvijayab@amd.com>
Signed-off-by: Kishon Vijay Abraham I <kvijayab@amd.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20250310201603.1217954-3-kim.phillips@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add CPU feature detection for "Allowed SEV Features" to allow the
Hypervisor to enforce that SEV-ES and SEV-SNP guest VMs cannot
enable features (via SEV_FEATURES) that the Hypervisor does not
support or wish to be enabled.
Signed-off-by: Kishon Vijay Abraham I <kvijayab@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Link: https://lore.kernel.org/r/20250310201603.1217954-2-kim.phillips@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
If multiple VMRUN instructions fail, resulting in calls to dump_vmcb(),
the output can become interleaved and it is impossible to identify which
line of output belongs to which VMCB. Add a mutex to dump_vmcb() so that
the output is serialized.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Kim Phillips <kim.phillips@amd.com>
Link: https://lore.kernel.org/r/a880678afd9488e1dd6017445802712f7c02cc6d.1742477213.git.thomas.lendacky@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
An SEV-ES/SEV-SNP VM save area (VMSA) can be decrypted if the guest
policy allows debugging. Update the dump_vmcb() routine to output
some of the SEV VMSA contents if possible. This can be useful for
debug purposes.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Kim Phillips <kim.phillips@amd.com>
Link: https://lore.kernel.org/r/ea3b852c295b6f4b200925ed6b6e2c90d9475e71.1742477213.git.thomas.lendacky@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
* Single fix for broken usage of 'multi-MIDR' infrastructure in PI
code, adding an open-coded erratum check for everyone's favorite pile
of sand: Cavium ThunderX
x86:
* Bugfixes from a planned posted interrupt rework
* Do not use kvm_rip_read() unconditionally to cater for guests
with inaccessible register state.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmgKdOQUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMLnAf+KZLEzeeQ7D29licBu8xg9dsiT+p1
A/wGv+LxA7EzGjWLoX1SVWIaziWfThK9FZaOtSclOoE4e4LHx+m69xuFJTzqiodz
P6oHDjwUBSclBW05bfW3WNsaa+kGjvoiAtyEmTni/IcMJQs7BSjR/Yh1Jhgi8Ozi
K8lwUH8BLRpqsXMI++c7IRAimqqecEt2oaf3U22nu3wz7EmAmsW8zlZjoAUD/xKc
uiKG5WeTx30TKH8YlSXLrNaB13qEUXzdqSeHPEXoTNid8u3ySIPBv1URamQKqEP2
caKZfPPhIDomeEsDobzKdsXVTZ9Pl9/lDxQ7wyMjnJ7ga3cCOKpy1GNfTQ==
=5EpY
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Single fix for broken usage of 'multi-MIDR' infrastructure in PI
code, adding an open-coded erratum check for everyone's favorite
pile of sand: Cavium ThunderX
x86:
- Bugfixes from a planned posted interrupt rework
- Do not use kvm_rip_read() unconditionally to cater for guests with
inaccessible register state"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Do not use kvm_rip_read() unconditionally for KVM_PROFILING
KVM: x86: Do not use kvm_rip_read() unconditionally in KVM tracepoints
KVM: SVM: WARN if an invalid posted interrupt IRTE entry is added
iommu/amd: WARN if KVM attempts to set vCPU affinity without posted intrrupts
iommu/amd: Return an error if vCPU affinity is set for non-vCPU IRTE
KVM: x86: Take irqfds.lock when adding/deleting IRQ bypass producer
KVM: x86: Explicitly treat routing entry type changes as changes
KVM: x86: Reset IRTE to host control if *new* route isn't postable
KVM: SVM: Allocate IR data using atomic allocation
KVM: SVM: Don't update IRTEs if APICv/AVIC is disabled
KVM: arm64, x86: make kvm_arch_has_irq_bypass() inline
arm64: Rework checks for broken Cavium HW in the PI code
The current is_x86_event has to go through the hybrid_pmus list to find
the matched pmu, then check if it's a X86 PMU and a X86 event. It's not
necessary.
The X86 PMU has a unique type ID on a non-hybrid machine, and a unique
capability type. They are good enough to do the check.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250424134718.311934-5-kan.liang@linux.intel.com
The counter backwards may be observed in the PMI handler when
counters-snapshotting some non-precise events in the freq mode.
For the non-precise events, it's possible the counters-snapshotting
records a positive value for an overflowed PEBS event. Then the HW
auto-reload mechanism reset the counter to 0 immediately. Because the
pebs_event_reset is cleared in the freq mode, which doesn't set the
PERF_X86_EVENT_AUTO_RELOAD.
In the PMI handler, 0 will be read rather than the positive value
recorded in the counters-snapshotting record.
The counters-snapshotting case has to be specially handled. Since the
event value has been updated when processing the counters-snapshotting
record, only needs to set the new period for the counter via
x86_pmu_set_period().
Fixes: e02e9b0374 ("perf/x86/intel: Support PEBS counters snapshotting")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250424134718.311934-6-kan.liang@linux.intel.com
The PEBS counters snapshotting group also requires a group flag in the
leader. The leader must be a X86 event.
Fixes: e02e9b0374 ("perf/x86/intel: Support PEBS counters snapshotting")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250424134718.311934-3-kan.liang@linux.intel.com
A warning in intel_pmu_lbr_counters_reorder() may be triggered by below
perf command.
perf record -e "{cpu-clock,cycles/call-graph="lbr"/}" -- sleep 1
It's because the group is mistakenly treated as a branch counter group.
The hw.flags of the leader are used to determine whether a group is a
branch counters group. However, the hw.flags is only available for a
hardware event. The field to store the flags is a union type. For a
software event, it's a hrtimer. The corresponding bit may be set if the
leader is a software event.
For a branch counter group and other groups that have a group flag
(e.g., topdown, PEBS counters snapshotting, and ACR), the leader must
be a X86 event. Check the X86 event before checking the flag.
The patch only fixes the issue for the branch counter group.
The following patch will fix the other groups.
There may be an alternative way to fix the issue by moving the hw.flags
out of the union type. It should work for now. But it's still possible
that the flags will be used by other types of events later. As long as
that type of event is used as a leader, a similar issue will be
triggered. So the alternative way is dropped.
Fixes: 3374491619 ("perf/x86/intel: Support branch counters logging")
Closes: https://lore.kernel.org/lkml/20250412091423.1839809-1-luogengkun@huaweicloud.com/
Reported-by: Luo Gengkun <luogengkun@huaweicloud.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20250424134718.311934-2-kan.liang@linux.intel.com
Micro-optimize vmx_do_interrupt_irqoff() by substituting
MOV %RBP,%RSP; POP %RBP instruction sequence with equivalent
LEAVE instruction. GCC compiler does this by default for
a generic tuning and for all modern processors:
DEF_TUNE (X86_TUNE_USE_LEAVE, "use_leave",
m_386 | m_CORE_ALL | m_K6_GEODE | m_AMD_MULTIPLE | m_ZHAOXIN
| m_TREMONT | m_CORE_HYBRID | m_CORE_ATOM | m_GENERIC)
The new code also saves a couple of bytes, from:
27: 48 89 ec mov %rbp,%rsp
2a: 5d pop %rbp
to:
27: c9 leave
No functional change intended.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lore.kernel.org/r/20250414081131.97374-2-ubizjak@gmail.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Explicitly verify the MSR load/store list counts are below the advertised
limit as part of the initial consistency checks on the lists, so that code
that consumes the count doesn't need to worry about extreme edge cases.
Enforcing the limit during the initial checks fixes a flaw on 32-bit KVM
where a sufficiently high @count could lead to overflow:
arch/x86/kvm/vmx/nested.c:834 nested_vmx_check_msr_switch()
warn: potential user controlled sizeof overflow 'addr + count * 16' '0-u64max + 16-68719476720'
arch/x86/kvm/vmx/nested.c
827 static int nested_vmx_check_msr_switch(struct kvm_vcpu *vcpu,
828 u32 count, u64 addr)
829 {
830 if (count == 0)
831 return 0;
832
833 if (!kvm_vcpu_is_legal_aligned_gpa(vcpu, addr, 16) ||
--> 834 !kvm_vcpu_is_legal_gpa(vcpu, (addr + count * sizeof(struct vmx_msr_entry) - 1)))
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
While the SDM doesn't explicitly state an illegal count results in VM-Fail,
the SDM states that exceeding the limit may result in undefined behavior.
I.e. the SDM gives hardware, and thus KVM, carte blanche to do literally
anything in response to a count that exceeds the "recommended" limit.
If the limit is exceeded, undefined processor behavior may result
(including a machine check during the VMX transition).
KVM already enforces the limit when processing the MSRs, i.e. already
signals a late VM-Exit Consistency Check for VM-Enter, and generates a
VMX Abort for VM-Exit. I.e. explicitly checking the limits simply means
KVM will signal VM-Fail instead of VM-Exit or VMX Abort.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/44961459-2759-4164-b604-f6bd43da8ce9@stanley.mountain
Link: https://lore.kernel.org/r/20250315024402.2363098-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
An AP destroy request for a target vCPU is typically followed by an
RMPADJUST to remove the VMSA attribute from the page currently being
used as the VMSA for the target vCPU. This can result in a vCPU that
is about to VMRUN to exit with #VMEXIT_INVALID.
This usually does not happen as APs are typically sitting in HLT when
being destroyed and therefore the vCPU thread is not running at the time.
However, if HLT is allowed inside the VM, then the vCPU could be about to
VMRUN when the VMSA attribute is removed from the VMSA page, resulting in
a #VMEXIT_INVALID when the vCPU actually issues the VMRUN and causing the
guest to crash. An RMPADJUST against an in-use (already running) VMSA
results in a #NPF for the vCPU issuing the RMPADJUST, so the VMSA
attribute cannot be changed until the VMRUN for target vCPU exits. The
Qemu command line option '-overcommit cpu-pm=on' is an example of allowing
HLT inside the guest.
Update the KVM_REQ_UPDATE_PROTECTED_GUEST_STATE event to include the
KVM_REQUEST_WAIT flag. The kvm_vcpu_kick() function will not wait for
requests to be honored, so create kvm_make_request_and_kick() that will
add a new event request and honor the KVM_REQUEST_WAIT flag. This will
ensure that the target vCPU sees the AP destroy request before returning
to the initiating vCPU should the target vCPU be in guest mode.
Fixes: e366f92ea9 ("KVM: SEV: Support SEV-SNP AP Creation NAE event")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/fe2c885bf35643dd224e91294edb6777d5df23a4.1743097196.git.thomas.lendacky@amd.com
[sean: add a comment explaining the use of smp_send_reschedule()]
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Now that posted MSI and KVM harvesting of PIR is identical, extract the
code (and posted MSI's wonderful comment) to a common helper.
No functional change intended.
Link: https://lore.kernel.org/r/20250401163447.846608-9-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use arch_xchg() when moving IRQs from the PIR to the vIRR, purely to avoid
instrumentation so that KVM is compatible with the needs of posted MSI.
This will allow extracting the core PIR logic to common code and sharing
it between KVM and posted MSI handling.
Link: https://lore.kernel.org/r/20250401163447.846608-8-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Rework KVM's processing of the PIR to use the same algorithm as posted
MSIs, i.e. to do READ(x4) => XCHG(x4) instead of (READ+XCHG)(x4). Given
KVM's long-standing, sub-optimal use of 32-bit accesses to the PIR, it's
safe to say far more thought and investigation was put into handling the
PIR for posted MSIs, i.e. there's no reason to assume KVM's existing
logic is meaningful, let alone superior.
Matching the processing done by posted MSIs will also allow deduplicating
the code between KVM and posted MSIs.
See the comment for handle_pending_pir() added by commit 1b03d82ba1
("x86/irq: Install posted MSI notification handler") for details on
why isolating loads from XCHG is desirable.
Suggested-by: Jim Mattson <jmattson@google.com>
Link: https://lore.kernel.org/r/20250401163447.846608-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Process the PIR at the natural kernel width, i.e. in 64-bit chunks on
64-bit kernels, so that the worst case of having a posted IRQ in each
chunk of the vIRR only requires 4 loads and xchgs from/to the PIR, not 8.
Deliberately use a "continue" to skip empty entries so that the code is a
carbon copy of handle_pending_pir(), in anticipation of deduplicating KVM
and posted MSI logic.
Suggested-by: Jim Mattson <jmattson@google.com>
Link: https://lore.kernel.org/r/20250401163447.846608-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Track the PIR bitmap in posted interrupt descriptor structures as an array
of unsigned longs instead of using unionized arrays for KVM (u32s) versus
IRQ management (u64s). In practice, because the non-KVM usage is (sanely)
restricted to 64-bit kernels, all existing usage of the u64 variant is
already working with unsigned longs.
Using "unsigned long" for the array will allow reworking KVM's processing
of the bitmap to read/write in 64-bit chunks on 64-bit kernels, i.e. will
allow optimizing KVM by reducing the number of atomic accesses to PIR.
Opportunstically replace the open coded literals in the posted MSIs code
with the appropriate macro. Deliberately don't use ARRAY_SIZE() in the
for-loops, even though it would be cleaner from a certain perspective, in
anticipation of decoupling the processing from the array declaration.
No functional change intended.
Link: https://lore.kernel.org/r/20250401163447.846608-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Read each vIRR exactly once when shuffling IRQs from the PIR to the vAPIC
to ensure getting the highest priority IRQ from the chunk doesn't reload
from the vIRR. In practice, a reload is functionally benign as vcpu->mutex
is held and so IRQs can be consumed, i.e. new IRQs can appear, but existing
IRQs can't disappear.
Link: https://lore.kernel.org/r/20250401163447.846608-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Track whether or not at least one IRQ was found in PIR during the initial
loop to load PIR chunks from memory. Doing so generates slightly better
code (arguably) for processing the for-loop of XCHGs, especially for the
case where there are no pending IRQs.
Note, while PIR can be modified between the initial load and the XCHG, it
can only _gain_ new IRQs, i.e. there is no danger of a false positive due
to the final version of pir_copy[] being empty.
Opportunistically convert the boolean to an "unsigned long" and compute
the effective boolean result via bitwise-OR. Some compilers, e.g.
clang-14, need the extra "hint" to elide conditional branches.
Opportunistically rename the variable in anticipation of moving the PIR
accesses to a common helper that can be shared by posted MSIs and KVM.
Old:
<+74>: test %rdx,%rdx
<+77>: je 0xffffffff812bbeb0 <handle_pending_pir+144>
<pir[0]>
<+88>: mov $0x1,%dl>
<+90>: test %rsi,%rsi
<+93>: je 0xffffffff812bbe8c <handle_pending_pir+108>
<pir[1]>
<+106>: mov $0x1,%dl
<+108>: test %rcx,%rcx
<+111>: je 0xffffffff812bbe9e <handle_pending_pir+126>
<pir[2]>
<+124>: mov $0x1,%dl
<+126>: test %rax,%rax
<+129>: je 0xffffffff812bbeb9 <handle_pending_pir+153>
<pir[3]>
<+142>: jmp 0xffffffff812bbec1 <handle_pending_pir+161>
<+144>: xor %edx,%edx
<+146>: test %rsi,%rsi
<+149>: jne 0xffffffff812bbe7f <handle_pending_pir+95>
<+151>: jmp 0xffffffff812bbe8c <handle_pending_pir+108>
<+153>: test %dl,%dl
<+155>: je 0xffffffff812bbf8e <handle_pending_pir+366>
New:
<+74>: mov %rax,%r8
<+77>: or %rcx,%r8
<+80>: or %rdx,%r8
<+83>: or %rsi,%r8
<+86>: setne %bl
<+89>: je 0xffffffff812bbf88 <handle_pending_pir+360>
<+95>: test %rsi,%rsi
<+98>: je 0xffffffff812bbe8d <handle_pending_pir+109>
<pir[0]>
<+109>: test %rdx,%rdx
<+112>: je 0xffffffff812bbe9d <handle_pending_pir+125>
<pir[1]>
<+125>: test %rcx,%rcx
<+128>: je 0xffffffff812bbead <handle_pending_pir+141>
<pir[2]>
<+141>: test %rax,%rax
<+144>: je 0xffffffff812bbebd <handle_pending_pir+157>
<pir[3]>
Link: https://lore.kernel.org/r/20250401163447.846608-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Ensure the PIR is read exactly once at the start of handle_pending_pir(),
to guarantee that checking for an outstanding posted interrupt in a given
chuck doesn't reload the chunk from the "real" PIR. Functionally, a reload
is benign, but it would defeat the purpose of pre-loading into a copy.
Fixes: 1b03d82ba1 ("x86/irq: Install posted MSI notification handler")
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20250401163447.846608-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
insn_decoder_test found a problem with decoding APX CTEST instructions:
Found an x86 instruction decoder bug, please report this.
ffffffff810021df 62 54 94 05 85 ff ctestneq
objdump says 6 bytes, but insn_get_length() says 5
It happens because x86-opcode-map.txt doesn't specify arguments for the
instruction and the decoder doesn't expect to see ModRM byte.
Fixes: 690ca3a306 ("x86/insn: Add support for APX EVEX instructions to the opcode map")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org # v6.10+
Link: https://lore.kernel.org/r/20250423065815.2003231-1-kirill.shutemov@linux.intel.com
Add a module param to each KVM vendor module to allow disabling device
posted interrupts without having to sacrifice all of APICv/AVIC, and to
also effectively enumerate to userspace whether or not KVM may be
utilizing device posted IRQs. Disabling device posted interrupts is
very desirable for testing, and can even be desirable for production
environments, e.g. if the host kernel wants to interpose on device
interrupts.
Put the module param in kvm-{amd,intel}.ko instead of kvm.ko to match
the overall APICv/AVIC controls, and to avoid complications with said
controls. E.g. if the param is in kvm.ko, KVM needs to be snapshot the
original user-defined value to play nice with a vendor module being
reloaded with different enable_apicv settings.
Link: https://lore.kernel.org/r/20250401161804.842968-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
When starting device assignment, i.e. potential IRQ bypass, don't blast
KVM_REQ_UNBLOCK if APICv is disabled/unsupported. There is no need to
wake vCPUs if they can never use VT-d posted IRQs (sending UNBLOCK guards
against races being vCPUs blocking and devices starting IRQ bypass).
Opportunistically use kvm_arch_has_irq_bypass() for all relevant checks in
the VMX Posted Interrupt code so that all checks in KVM x86 incorporate
the same information (once AMD/AVIC is given similar treatment).
Cc: Yosry Ahmed <yosry.ahmed@linux.dev>
Link: https://lore.kernel.org/r/20250401161804.842968-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Rescan I/O APIC routes for a vCPU after handling an intercepted I/O APIC
EOI for an IRQ that is not targeting said vCPU, i.e. after handling what's
effectively a stale EOI VM-Exit. If a level-triggered IRQ is in-flight
when IRQ routing changes, e.g. because the guest changes routing from its
IRQ handler, then KVM intercepts EOIs on both the new and old target vCPUs,
so that the in-flight IRQ can be de-asserted when it's EOI'd.
However, only the EOI for the in-flight IRQ needs to be intercepted, as
IRQs on the same vector with the new routing are coincidental, i.e. occur
only if the guest is reusing the vector for multiple interrupt sources.
If the I/O APIC routes aren't rescanned, KVM will unnecessarily intercept
EOIs for the vector and negative impact the vCPU's interrupt performance.
Note, both commit db2bdcbbbd ("KVM: x86: fix edge EOI and IOAPIC reconfig
race") and commit 0fc5a36dd6 ("KVM: x86: ioapic: Fix level-triggered EOI
and IOAPIC reconfigure race") mentioned this issue, but it was considered
a "rare" occurrence thus was not addressed. However in real environments,
this issue can happen even in a well-behaved guest.
Cc: Kai Huang <kai.huang@intel.com>
Co-developed-by: xuyun <xuyun_xy.xy@linux.alibaba.com>
Signed-off-by: xuyun <xuyun_xy.xy@linux.alibaba.com>
Signed-off-by: weizijie <zijie.wei@linux.alibaba.com>
[sean: massage changelog and comments, use int/-1, reset at scan]
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20250304013335.4155703-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Extract the vCPU specific EOI interception logic for I/O APIC emulation
into a common helper for userspace and in-kernel emulation in anticipation
of optimizing the "pending EOI" case.
No functional change intended.
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20250304013335.4155703-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Extract and isolate the trigger mode check in kvm_scan_ioapic_routes() in
anticipation of moving destination matching logic to a common helper (for
userspace vs. in-kernel I/O APIC emulation).
No functional change intended.
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20250304013335.4155703-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
The latest AMD platform has introduced a new instruction called PREFETCHI.
This instruction loads a cache line from a specified memory address into
the indicated data or instruction cache level, based on locality reference
hints.
Feature bit definition:
CPUID_Fn80000021_EAX [bit 20] - Indicates support for IC prefetch.
This feature is analogous to Intel's PREFETCHITI (CPUID.(EAX=7,ECX=1):EDX),
though the CPUID bit definitions differ between AMD and Intel.
Advertise support to userspace, as no additional enabling is necessary
(PREFETCHI can't be intercepted as there's no instruction specific behavior
that needs to be virtualize).
The feature is documented in Processor Programming Reference (PPR)
for AMD Family 1Ah Model 02h, Revision C1 (Link below).
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206537
Signed-off-by: Babu Moger <babu.moger@amd.com>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/ee1c08fc400bb574a2b8f2c6a0bd9def10a29d35.1744130533.git.babu.moger@amd.com
[sean: rewrite shortlog to highlight the KVM functionality]
Signed-off-by: Sean Christopherson <seanjc@google.com>
WRMSR_XX_BASE_NS is bit 1 so put it there, add some new bits as
comments only.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20250324160617.15379-1-bp@kernel.org
[sean: skip the FSRS/FSRC placeholders to avoid confusion]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Advertise support for WRMSRNS (WRMSR non-serializing) to userspace if the
instruction is supported by the underlying CPU. From a virtualization
perspective, the only difference between WRMSRNS and WRMSR is that VM-Exits
due to WRMSRNS set EXIT_QUALIFICATION to '1'. WRMSRNS doesn't require a
new enabling control, shares the same basic exit reason, and behaves the
same as WRMSR with respect to MSR interception.
WRMSR and WRMSRNS use the same basic exit reason (see Appendix C). For
WRMSR, the exit qualification is 0, while for WRMSRNS it is 1.
Don't do anything different when emulating WRMSRNS vs. WRMSR, as KVM can't
do anything less, i.e. can't make emulation non-serializing. The
motivation for the guest to use WRMSRNS instead of WRMSR is to avoid
immediately serializing the CPU when the necessary serialization is
guaranteed by some other mechanism, i.e. WRMSRNS being fully serializing
isn't guest-visible, just less performant.
Suggested-by: Xin Li (Intel) <xin@zytor.com>
Link: https://lore.kernel.org/r/20250227010111.3222742-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Rename the WRMSRNS instruction opcode macro so that it doesn't collide
with X86_FEATURE_WRMSRNS when using token pasting to generate references
to X86_FEATURE_WRMSRNS. KVM heavily uses token pasting to generate KVM's
set of support feature bits, and adding WRMSRNS support in KVM will run
will run afoul of the opcode macro.
arch/x86/kvm/cpuid.c:719:37: error: pasting "X86_FEATURE_" and "" "" does not
give a valid preprocessing token
719 | u32 __leaf = __feature_leaf(X86_FEATURE_##name); \
| ^~~~~~~~~~~~
KVM has worked around one such collision in the past by #undef'ing the
problematic macro in order to avoid blocking a KVM rework, but such games
are generally undesirable, e.g. requires bleeding macro details into KVM,
risks weird behavior if what KVM is #undef'ing changes, etc.
Reviewed-by: Xin Li (Intel) <xin@zytor.com>
Link: https://lore.kernel.org/r/20250227010111.3222742-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Commit 2e7eab8142 ("KVM: VMX: Execute IBPB on emulated VM-exit when
guest has IBRS") added an IBPB in the emulated VM-exit path on Intel to
properly virtualize IBRS by providing separate predictor modes for L1
and L2.
AMD requires similar handling, except when IbrsSameMode is enumerated by
the host CPU (which is the case on most/all AMD CPUs). With
IbrsSameMode, hardware IBRS is sufficient and no extra handling is
needed from KVM.
Generalize the handling in nested_vmx_vmexit() by moving it into a
generic function, add the AMD handling, and use it in
nested_svm_vmexit() too. The main reason for using a generic function is
to have a single place to park the huge comment about virtualizing IBRS.
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Reviewed-by: Jim Mattson <jmattson@google.com>
Link: https://lore.kernel.org/r/20250221163352.3818347-4-yosry.ahmed@linux.dev
[sean: use kvm_nested_vmexit_handle_spec_ctrl() for the helper]
Signed-off-by: Sean Christopherson <seanjc@google.com>
If IBRS provides same mode (kernel/user or host/guest) protection on the
host, then by definition it also provides same mode protection in the
guest. In fact, all different modes from the guest's perspective are the
same mode from the host's perspective anyway.
Propagate IbrsSameMode to the guests.
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Reviewed-by: Jim Mattson <jmattson@google.com>
Link: https://lore.kernel.org/r/20250221163352.3818347-3-yosry.ahmed@linux.dev
Signed-off-by: Sean Christopherson <seanjc@google.com>
Per the APM [1]:
Some processors, identified by CPUID Fn8000_0008_EBX[IbrsSameMode]
(bit 19) = 1, provide additional speculation limits. For these
processors, when IBRS is set, indirect branch predictions are not
influenced by any prior indirect branches, regardless of mode (CPL
and guest/host) and regardless of whether the prior indirect branches
occurred before or after the setting of IBRS. This is referred to as
Same Mode IBRS.
Define this feature bit, which will be used by KVM to determine if an
IBPB is required on nested VM-exits in SVM.
[1] AMD64 Architecture Programmer's Manual Pub. 40332, Rev 4.08 - April
2024, Volume 2, 3.2.9 Speculation Control MSRs
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Reviewed-by: Jim Mattson <jmattson@google.com>
Link: https://lore.kernel.org/r/20250221163352.3818347-2-yosry.ahmed@linux.dev
Signed-off-by: Sean Christopherson <seanjc@google.com>
The "kvm_run->kvm_valid_regs" and "kvm_run->kvm_dirty_regs" variables are
u64 type. We are only using the lowest 3 bits but we want to ensure that
the users are not passing invalid bits so that we can use the remaining
bits in the future.
However "sync_valid_fields" and kvm_sync_valid_fields() are u32 type so
the check only ensures that the lower 32 bits are clear. Fix this by
changing the types to u64.
Fixes: 74c1807f6c ("KVM: x86: block KVM_CAP_SYNC_REGS if guest state is protected")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/ec25aad1-113e-4c6e-8941-43d432251398@stanley.mountain
Signed-off-by: Sean Christopherson <seanjc@google.com>
Previously, commit ed129ec905 ("KVM: x86: forcibly leave nested mode
on vCPU reset") addressed an issue where a triple fault occurring in
nested mode could lead to use-after-free scenarios. However, the commit
did not handle the analogous situation for System Management Mode (SMM).
This omission results in triggering a WARN when KVM forces a vCPU INIT
after SHUTDOWN interception while the vCPU is in SMM. This situation was
reprodused using Syzkaller by:
1) Creating a KVM VM and vCPU
2) Sending a KVM_SMI ioctl to explicitly enter SMM
3) Executing invalid instructions causing consecutive exceptions and
eventually a triple fault
The issue manifests as follows:
WARNING: CPU: 0 PID: 25506 at arch/x86/kvm/x86.c:12112
kvm_vcpu_reset+0x1d2/0x1530 arch/x86/kvm/x86.c:12112
Modules linked in:
CPU: 0 PID: 25506 Comm: syz-executor.0 Not tainted
6.1.130-syzkaller-00157-g164fe5dde9b6 #0
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS 1.12.0-1 04/01/2014
RIP: 0010:kvm_vcpu_reset+0x1d2/0x1530 arch/x86/kvm/x86.c:12112
Call Trace:
<TASK>
shutdown_interception+0x66/0xb0 arch/x86/kvm/svm/svm.c:2136
svm_invoke_exit_handler+0x110/0x530 arch/x86/kvm/svm/svm.c:3395
svm_handle_exit+0x424/0x920 arch/x86/kvm/svm/svm.c:3457
vcpu_enter_guest arch/x86/kvm/x86.c:10959 [inline]
vcpu_run+0x2c43/0x5a90 arch/x86/kvm/x86.c:11062
kvm_arch_vcpu_ioctl_run+0x50f/0x1cf0 arch/x86/kvm/x86.c:11283
kvm_vcpu_ioctl+0x570/0xf00 arch/x86/kvm/../../../virt/kvm/kvm_main.c:4122
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl fs/ioctl.c:856 [inline]
__x64_sys_ioctl+0x19a/0x210 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x35/0x80 arch/x86/entry/common.c:81
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
Architecturally, INIT is blocked when the CPU is in SMM, hence KVM's WARN()
in kvm_vcpu_reset() to guard against KVM bugs, e.g. to detect improper
emulation of INIT. SHUTDOWN on SVM is a weird edge case where KVM needs to
do _something_ sane with the VMCB, since it's technically undefined, and
INIT is the least awful choice given KVM's ABI.
So, double down on stuffing INIT on SHUTDOWN, and force the vCPU out of
SMM to avoid any weirdness (and the WARN).
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: ed129ec905 ("KVM: x86: forcibly leave nested mode on vCPU reset")
Cc: stable@vger.kernel.org
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Mikhail Lobanov <m.lobanov@rosa.ru>
Link: https://lore.kernel.org/r/20250414171207.155121-1-m.lobanov@rosa.ru
[sean: massage changelog, make it clear this isn't architectural behavior]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Perf doesn't work at perf stat for hardware events on certain x86 platforms:
$perf stat -- sleep 1
Performance counter stats for 'sleep 1':
16.44 msec task-clock # 0.016 CPUs utilized
2 context-switches # 121.691 /sec
0 cpu-migrations # 0.000 /sec
54 page-faults # 3.286 K/sec
<not supported> cycles
<not supported> instructions
<not supported> branches
<not supported> branch-misses
The reason is that the check in x86_pmu_hw_config() for sampling events is
unexpectedly applied to counting events as well.
It should only impact x86 platforms with limit_period used for non-PEBS
events. For Intel platforms, it should only impact some older platforms,
e.g., HSW, BDW and NHM.
Fixes: 88ec7eedbb ("perf/x86: Fix low freqency setting issue")
Signed-off-by: Luo Gengkun <luogengkun@huaweicloud.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20250423064724.3716211-1-luogengkun@huaweicloud.com
* Single fix for broken usage of 'multi-MIDR' infrastructure in PI
code, adding an open-coded erratum check for Cavium ThunderX
* Bugfixes from a planned posted interrupt rework
* Do not use kvm_rip_read() unconditionally to cater for guests
with inaccessible register state.
The GNU coreutils version of truncate, which is the original, accepts a
% prefix for the -s size argument which means the file in question
should be padded to a multiple of the given size. This is currently used
to pad the setup block of bzImage to a multiple of 4k before appending
the decompressor.
busybox reimplements truncate but does not support this idiom, and
therefore fails the build since commit
9c54baab44 ("x86/boot: Drop CRC-32 checksum and the build tool that generates it")
Since very little build code within the kernel depends on the 'truncate'
utility, work around this incompatibility by avoiding truncate altogether,
and relying on dd to perform the padding.
Fixes: 9c54baab44 ("x86/boot: Drop CRC-32 checksum and the build tool that generates it")
Reported-by: <phasta@kernel.org>
Tested-by: Philipp Stanner <phasta@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250424101917.1552527-2-ardb+git@google.com
This commits breaks SNP guests:
234cf67fc3 ("x86/sev: Split off startup code from core code")
The SNP guest boots, but no longer has access to the VMPCK keys needed
to communicate with the ASP, which is used, for example, to obtain an
attestation report.
The secrets_pa value is defined as static in both startup.c and
core.c. It is set by a function in startup.c and so when used in
core.c its value will be 0.
Share it again and add the sev_ prefix to put it into the global
SEV symbols namespace.
[ mingo: Renamed to sev_secrets_pa ]
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Link: https://lore.kernel.org/r/cf878810-81ed-3017-52c6-ce6aa41b5f01@amd.com
Not all VMs allow access to RIP. Check guest_state_protected before
calling kvm_rip_read().
This avoids, for example, hitting WARN_ON_ONCE in vt_cache_reg() for
TDX VMs.
Fixes: 81bf912b2c ("KVM: TDX: Implement TDX vcpu enter/exit path")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Message-ID: <20250415104821.247234-3-adrian.hunter@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Not all VMs allow access to RIP. Check guest_state_protected before
calling kvm_rip_read().
This avoids, for example, hitting WARN_ON_ONCE in vt_cache_reg() for
TDX VMs.
Fixes: 81bf912b2c ("KVM: TDX: Implement TDX vcpu enter/exit path")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Message-ID: <20250415104821.247234-2-adrian.hunter@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that the AMD IOMMU doesn't signal success incorrectly, WARN if KVM
attempts to track an AMD IRTE entry without metadata.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250404193923.1413163-8-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Take irqfds.lock when adding/deleting an IRQ bypass producer to ensure
irqfd->producer isn't modified while kvm_irq_routing_update() is running.
The only lock held when a producer is added/removed is irqbypass's mutex.
Fixes: 8727688006 ("KVM: x86: select IRQ_BYPASS_MANAGER")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250404193923.1413163-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Explicitly treat type differences as GSI routing changes, as comparing MSI
data between two entries could get a false negative, e.g. if userspace
changed the type but left the type-specific data as-is.
Fixes: 515a0c79e7 ("kvm: irqfd: avoid update unmodified entries of the routing")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250404193923.1413163-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Restore an IRTE back to host control (remapped or posted MSI mode) if the
*new* GSI route prevents posting the IRQ directly to a vCPU, regardless of
the GSI routing type. Updating the IRTE if and only if the new GSI is an
MSI results in KVM leaving an IRTE posting to a vCPU.
The dangling IRTE can result in interrupts being incorrectly delivered to
the guest, and in the worst case scenario can result in use-after-free,
e.g. if the VM is torn down, but the underlying host IRQ isn't freed.
Fixes: efc644048e ("KVM: x86: Update IRTE for posted-interrupts")
Fixes: 411b44ba80 ("svm: Implements update_pi_irte hook to setup posted interrupt")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250404193923.1413163-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allocate SVM's interrupt remapping metadata using GFP_ATOMIC as
svm_ir_list_add() is called with IRQs are disabled and irqfs.lock held
when kvm_irq_routing_update() reacts to GSI routing changes.
Fixes: 411b44ba80 ("svm: Implements update_pi_irte hook to setup posted interrupt")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250404193923.1413163-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Skip IRTE updates if AVIC is disabled/unsupported, as forcing the IRTE
into remapped mode (kvm_vcpu_apicv_active() will never be true) is
unnecessary and wasteful. The IOMMU driver is responsible for putting
IRTEs into remapped mode when an IRQ is allocated by a device, long before
that device is assigned to a VM. I.e. the kernel as a whole has major
issues if the IRTE isn't already in remapped mode.
Opportunsitically kvm_arch_has_irq_bypass() to query for APICv/AVIC, so
so that all checks in KVM x86 incorporate the same information.
Cc: Yosry Ahmed <yosry.ahmed@linux.dev>
Cc: Jim Mattson <jmattson@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250401161804.842968-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_arch_has_irq_bypass() is a small function and even though it does
not appear in any *really* hot paths, it's also not entirely rare.
Make it inline---it also works out nicely in preparation for using it in
kvm-intel.ko and kvm-amd.ko, since the function is not currently exported.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Recently _pgd_alloc() was switched from using __get_free_pages() to
pagetable_alloc_noprof(), which might return a compound page in case
the allocation order is larger than 0.
On x86 this will be the case if CONFIG_MITIGATION_PAGE_TABLE_ISOLATION
is set, even if PTI has been disabled at runtime.
When running as a Xen PV guest (this will always disable PTI), using
a compound page for a PGD will result in VM_BUG_ON_PGFLAGS being
triggered when the Xen code tries to pin the PGD.
Fix the Xen issue together with the not needed 8k allocation for a
PGD with PTI disabled by replacing PGD_ALLOCATION_ORDER with an
inline helper returning the needed order for PGD allocations.
Fixes: a9b3c355c2 ("asm-generic: pgalloc: provide generic __pgd_{alloc,free}")
Reported-by: Petr Vaněk <arkamar@atlas.cz>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Tested-by: Petr Vaněk <arkamar@atlas.cz>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250422131717.25724-1-jgross%40suse.com
Now that all sha256_base users have been converted to use the API
partial block handling, remove the partial block helpers.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
objtool already struggles to identify jump tables correctly in non-PIC
code, where the idiom is something like
jmpq *table(,%idx,8)
and the table is a list of absolute addresses of jump targets.
When using -fPIC, both the table reference as well as the jump targets
are emitted in a RIP-relative manner, resulting in something like
leaq table(%rip), %tbl
movslq (%tbl,%idx,4), %offset
addq %offset, %tbl
jmpq *%tbl
and the table is a list of offsets of the jump targets relative to the
start of the entire table.
Considering that this sequence of instructions can be interleaved with
other instructions that have nothing to do with the jump table in
question, it is extremely difficult to infer the control flow by
deriving the jump targets from the indirect jump, the location of the
table and the relative offsets it contains.
So let's not bother and disable jump tables for code built with -fPIC
under arch/x86/boot/startup.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-efi@vger.kernel.org
Link: https://lore.kernel.org/r/20250422210510.600354-2-ardb+git@google.com
The #ifdefs only guard code that is also guarded by in_ia32_syscall(),
which already contains the same #ifdef itself.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Link: https://lore.kernel.org/r/20240910-x86-vdso-ifdef-v1-2-877c9df9b081@linutronix.de
Replace the open-coded ifdefs in C sources files with IS_ENABLED().
This makes the code easier to read and enables the compiler to typecheck
also the disabled parts, before optimizing them away.
To make this work, also remove the ifdefs from declarations of used
variables.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Link: https://lore.kernel.org/r/20240910-x86-vdso-ifdef-v1-1-877c9df9b081@linutronix.de
Now that all users have been moved into startup/ where PIC codegen is
used, RIP_REL_REF() is no longer needed. Remove it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20250418141253.2601348-14-ardb+git@google.com
Now that the early SEV code is built with -fPIC, RIP_REL_REF() has no
effect and can be dropped.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20250418141253.2601348-13-ardb+git@google.com
Move the SEV startup code into arch/x86/boot/startup/, where it will
reside along with other code that executes extremely early, and
therefore needs to be built in a special manner.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20250418141253.2601348-12-ardb+git@google.com
Disentangle the SEV core code and the SEV code that is called during
early boot. The latter piece will be moved into startup/ in a subsequent
patch.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20250418141253.2601348-11-ardb+git@google.com
GCC may ignore the __no_sanitize_address function attribute when
inlining, resulting in KASAN instrumentation in code tagged as
'noinstr'.
Move the SEV NMI handling code, which is noinstr, into a separate source
file so KASAN can be disabled on the whole file without losing coverage
of other SEV core code, once the startup code is split off from it too.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20250418141253.2601348-10-ardb+git@google.com
In particular we need this fix before applying subsequent changes:
d54d610243 ("x86/boot/sev: Avoid shared GHCB page for early memory acceptance")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Old microcode is bad for users and for kernel developers.
For users, it exposes them to known fixed security and/or functional
issues. These obviously rarely result in instant dumpster fires in
every environment. But it is as important to keep your microcode up
to date as it is to keep your kernel up to date.
Old microcode also makes kernels harder to debug. A developer looking
at an oops need to consider kernel bugs, known CPU issues and unknown
CPU issues as possible causes. If they know the microcode is up to
date, they can mostly eliminate known CPU issues as the cause.
Make it easier to tell if CPU microcode is out of date. Add a list
of released microcode. If the loaded microcode is older than the
release, tell users in a place that folks can find it:
/sys/devices/system/cpu/vulnerabilities/old_microcode
Tell kernel kernel developers about it with the existing taint
flag:
TAINT_CPU_OUT_OF_SPEC
== Discussion ==
When a user reports a potential kernel issue, it is very common
to ask them to reproduce the issue on mainline. Running mainline,
they will (independently from the distro) acquire a more up-to-date
microcode version list. If their microcode is old, they will
get a warning about the taint and kernel developers can take that
into consideration when debugging.
Just like any other entry in "vulnerabilities/", users are free to
make their own assessment of their exposure.
== Microcode Revision Discussion ==
The microcode versions in the table were generated from the Intel
microcode git repo:
8ac9378a8487 ("microcode-20241112 Release")
which as of this writing lags behind the latest microcode-20250211.
It can be argued that the versions that the kernel picks to call "old"
should be a revision or two old. Which specific version is picked is
less important to me than picking *a* version and enforcing it.
This repository contains only microcode versions that Intel has deemed
to be OS-loadable. It is quite possible that the BIOS has loaded a
newer microcode than the latest in this repo. If this happens, the
system is considered to have new microcode, not old.
Specifically, the sysfs file and taint flag answer the question:
Is the CPU running on the latest OS-loadable microcode,
or something even later that the BIOS loaded?
In other words, Intel never publishes an authoritative list of CPUs
and latest microcode revisions. Until it does, this is the best that
Linux can do.
Also note that the "intel-ucode-defs.h" file is simple, ugly and
has lots of magic numbers. That's on purpose and should allow a
single file to be shared across lots of stable kernel regardless of if
they have the new "VFM" infrastructure or not. It was generated with
a dumb script.
== FAQ ==
Q: Does this tell me if my system is secure or insecure?
A: No. It only tells you if your microcode was old when the
system booted.
Q: Should the kernel warn if the microcode list itself is too old?
A: No. New kernels will get new microcode lists, both mainline
and stable. The only way to have an old list is to be running
an old kernel in which case you have bigger problems.
Q: Is this for security or functional issues?
A: Both.
Q: If a given microcode update only has functional problems but
no security issues, will it be considered old?
A: Yes. All microcode image versions within a microcode release
are treated identically. Intel appears to make security
updates without disclosing them in the release notes. Thus,
all updates are considered to be security-relevant.
Q: Who runs old microcode?
A: Anybody with an old distro. This happens all the time inside
of Intel where there are lots of weird systems in labs that
might not be getting regular distro updates and might also
be running rather exotic microcode images.
Q: If I update my microcode after booting will it stop saying
"Vulnerable"?
A: No. Just like all the other vulnerabilies, you need to
reboot before the kernel will reassess your vulnerability.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: "Ahmed S. Darwish" <darwi@linutronix.de>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/all/20250421195659.CF426C07%40davehans-spike.ostc.intel.com
(cherry picked from commit 9127865b15eb0a1bd05ad7efe29489c44394bdc1)
Dave Hansen reports the following crash on a 32-bit system with
CONFIG_HIGHMEM=y and CONFIG_X86_PAE=y:
> 0xf75fe000 is the mem_map[] entry for the first page >4GB. It
> obviously wasn't allocated, thus the oops.
BUG: unable to handle page fault for address: f75fe000
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
*pdpt = 0000000002da2001 *pde = 000000000300c067 *pte = 0000000000000000
Oops: Oops: 0002 [#1] SMP NOPTI
CPU: 0 UID: 0 PID: 0 Comm: swapper Not tainted 6.15.0-rc1-00288-ge618ee89561b-dirty #311 PREEMPT(undef)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
EIP: __free_pages_core+0x3c/0x74
...
Call Trace:
memblock_free_pages+0x11/0x2c
memblock_free_all+0x2ce/0x3a0
mm_core_init+0xf5/0x320
start_kernel+0x296/0x79c
i386_start_kernel+0xad/0xb0
startup_32_smp+0x151/0x154
The mem_map[] is allocated up to the end of ZONE_HIGHMEM which is defined
by max_pfn.
The bug was introduced by this recent commit:
6faea3422e ("arch, mm: streamline HIGHMEM freeing")
Previously, freeing of high memory was also clamped to the end of
ZONE_HIGHMEM but after this change, memblock_free_all() tries to
free memory above the of ZONE_HIGHMEM as well and that causes
access to mem_map[] entries beyond the end of the memory map.
To fix this, discard the memory after max_pfn from memblock on
32-bit systems so that core MM would be aware only of actually
usable memory.
Fixes: 6faea3422e ("arch, mm: streamline HIGHMEM freeing")
Reported-by: Dave Hansen <dave.hansen@intel.com>
Tested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Shevchenko <andy@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Davide Ciminaghi <ciminaghi@gnudd.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: kvm@vger.kernel.org
Link: https://lore.kernel.org/r/20250413080858.743221-1-rppt@kernel.org # discussion and submission
Though the module_exit functions are now no-ops, they should still be
defined, since otherwise the modules become unremovable.
Fixes: 1f81c58279 ("crypto: arm/poly1305 - remove redundant shash algorithm")
Fixes: f4b1a73aec ("crypto: arm64/poly1305 - remove redundant shash algorithm")
Fixes: 378a337ab4 ("crypto: powerpc/poly1305 - implement library instead of shash")
Fixes: 21969da642 ("crypto: x86/poly1305 - remove redundant shash algorithm")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Though the module_exit functions are now no-ops, they should still be
defined, since otherwise the modules become unremovable.
Fixes: 08820553f3 ("crypto: arm/chacha - remove the redundant skcipher algorithms")
Fixes: 8c28abede1 ("crypto: arm64/chacha - remove the skcipher algorithms")
Fixes: f7915484c0 ("crypto: powerpc/chacha - remove the skcipher algorithms")
Fixes: ceba0eda83 ("crypto: riscv/chacha - implement library instead of skcipher")
Fixes: 632ab0978f ("crypto: x86/chacha - remove the skcipher algorithms")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
- Fix hypercall detection on Xen guests
- Extend the AMD microcode loader SHA check to Zen5,
to block loading of any unreleased standalone
Zen5 microcode patches
- Add new Intel CPU model number for Bartlett Lake
- Fix the workaround for AMD erratum 1054
- Fix buggy early memory acceptance between
SEV-SNP guests and the EFI stub
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=cqkj
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2025-04-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 fixes from Ingo Molnar:
- Fix hypercall detection on Xen guests
- Extend the AMD microcode loader SHA check to Zen5, to block loading
of any unreleased standalone Zen5 microcode patches
- Add new Intel CPU model number for Bartlett Lake
- Fix the workaround for AMD erratum 1054
- Fix buggy early memory acceptance between SEV-SNP guests and the EFI
stub
* tag 'x86-urgent-2025-04-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot/sev: Avoid shared GHCB page for early memory acceptance
x86/cpu/amd: Fix workaround for erratum 1054
x86/cpu: Add CPU model number for Bartlett Lake CPUs with Raptor Cove cores
x86/microcode/AMD: Extend the SHA check to Zen5, block loading of any unreleased standalone Zen5 microcode patches
x86/xen: Fix __xen_hypercall_setfunc()
- Fix Intel uncore PMU IIO free running counters on
SPR, ICX and SNR systems.
- Fix Intel PEBS buffer overflow handling
- Fix skid in Intel PEBS sampling of user-space
general purpose registers
- Enable Panther Lake PMU support - similar to Lunar Lake.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=rUbq
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-2025-04-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 perf event fixes from Ingo Molnar:
"Miscellaneous fixes and a hardware-enabling change:
- Fix Intel uncore PMU IIO free running counters on SPR, ICX and SNR
systems
- Fix Intel PEBS buffer overflow handling
- Fix skid in Intel PEBS sampling of user-space general purpose
registers
- Enable Panther Lake PMU support - similar to Lunar Lake"
* tag 'perf-urgent-2025-04-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Add Panther Lake support
perf/x86/intel: Allow to update user space GPRs from PEBS records
perf/x86/intel: Don't clear perf metrics overflow bit unconditionally
perf/x86/intel/uncore: Fix the scale of IIO free running counters on SPR
perf/x86/intel/uncore: Fix the scale of IIO free running counters on ICX
perf/x86/intel/uncore: Fix the scale of IIO free running counters on SNR
As the function switch_mm_irqs_off() implies, it ought to be called with
IRQs *off*. Commit 58f8ffa917 ("x86/mm: Allow temporary MMs when IRQs
are on") caused this to not be the case for EFI.
Ensure IRQs are off where it matters.
Fixes: 58f8ffa917 ("x86/mm: Allow temporary MMs when IRQs are on")
Reported-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rik van Riel <riel@surriel.com>
Link: https://lore.kernel.org/r/20250418095034.GR38216@noisy.programming.kicks-ass.net
Communicating with the hypervisor using the shared GHCB page requires
clearing the C bit in the mapping of that page. When executing in the
context of the EFI boot services, the page tables are owned by the
firmware, and this manipulation is not possible.
So switch to a different API for accepting memory in SEV-SNP guests, one
which is actually supported at the point during boot where the EFI stub
may need to accept memory, but the SEV-SNP init code has not executed
yet.
For simplicity, also switch the memory acceptance carried out by the
decompressor when not booting via EFI - this only involves the
allocation for the decompressed kernel, and is generally only called
after kexec, as normal boot will jump straight into the kernel from the
EFI stub.
Fixes: 6c32117963 ("x86/sev: Add SNP-specific unaccepted memory support")
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Co-developed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: <stable@vger.kernel.org>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-efi@vger.kernel.org
Link: https://lore.kernel.org/r/20250404082921.2767593-8-ardb+git@google.com # discussion thread #1
Link: https://lore.kernel.org/r/20250410132850.3708703-2-ardb+git@google.com # discussion thread #2
Link: https://lore.kernel.org/r/20250417202120.1002102-2-ardb+git@google.com # final submission
Erratum 1054 affects AMD Zen processors that are a part of Family 17h
Models 00-2Fh and the workaround is to not set HWCR[IRPerfEn]. However,
when X86_FEATURE_ZEN1 was introduced, the condition to detect unaffected
processors was incorrectly changed in a way that the IRPerfEn bit gets
set only for unaffected Zen 1 processors.
Ensure that HWCR[IRPerfEn] is set for all unaffected processors. This
includes a subset of Zen 1 (Family 17h Models 30h and above) and all
later processors. Also clear X86_FEATURE_IRPERF on affected processors
so that the IRPerfCount register is not used by other entities like the
MSR PMU driver.
Fixes: 232afb5578 ("x86/CPU/AMD: Add X86_FEATURE_ZEN1")
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Borislav Petkov <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/caa057a9d6f8ad579e2f1abaa71efbd5bd4eaf6d.1744956467.git.sandipan.das@amd.com
Unlike L3 and DF counters, UMC counters (PERF_CTRs) set the Overflow bit
(bit 48) and saturate on overflow. A subsequent pmu->read() of the event
reports an incorrect accumulated count as there is no difference between
the previous and the current values of the counter.
To avoid this, inspect the current counter value and proactively reset
the corresponding PERF_CTR register on every pmu->read(). Combined with
the periodic reads initiated by the hrtimer, the counters never get a
chance saturate but the resolution reduces to 47 bits.
Fixes: 25e5684782 ("perf/x86/amd/uncore: Add memory controller support")
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Song Liu <song@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/dee9c8af2c6d66814cf4c6224529c144c620cf2c.1744906694.git.sandipan.das@amd.com
Introduce a module parameter for configuring the hrtimer duration in
milliseconds. The default duration is 60000 milliseconds and the intent
is to allow users to customize it to suit jitter tolerances. It should
be noted that a longer duration will reduce jitter but affect accuracy
if the programmed events cause the counters to overflow multiple times
in a single interval.
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/6cb0101da74955fa9c8361f168ffdf481ae8a200.1744906694.git.sandipan.das@amd.com
Uncore counters do not provide mechanisms like interrupts to report
overflows and the accumulated user-visible count is incorrect if there
is more than one overflow between two successive read requests for the
same event because the value of prev_count goes out-of-date for
calculating the correct delta.
To avoid this, start a hrtimer to periodically initiate a pmu->read() of
the active counters for keeping prev_count up-to-date. It should be
noted that the hrtimer duration should be lesser than the shortest time
it takes for a counter to overflow for this approach to be effective.
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/8ecf5fe20452da1cd19cf3ff4954d3e7c5137468.1744906694.git.sandipan.das@amd.com
hrtimer handlers can be deferred to softirq context and affect timely
detection of counter overflows. Hence switch to HRTIMER_MODE_HARD.
Disabling and re-enabling IRQs in the hrtimer handler is not required
as pmu->start() and pmu->stop() can no longer intervene while updating
event->hw.prev_count.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/0ad4698465077225769e8edd5b2c7e8f48f636d5.1744906694.git.sandipan.das@amd.com
Rename rep_nop() function to what it really does.
No functional change intended.
Suggested-by: David Laight <david.laight.linux@gmail.com>
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Link: https://lore.kernel.org/r/20250418080805.83679-1-ubizjak@gmail.com
Current minimum required version of binutils is 2.25,
which supports PAUSE instruction mnemonic.
Replace "REP; NOP" with this proper mnemonic.
No functional change intended.
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Link: https://lore.kernel.org/r/20250418080805.83679-2-ubizjak@gmail.com
Minimum version of binutils required to compile the kernel is 2.25.
This version correctly handles the "rep" prefixes, so it is possible
to remove the semicolon, which was used to support ancient versions
of GNU as.
Due to the semicolon, the compiler considers "rep; insn" (or its
alternate "rep\n\tinsn" form) as two separate instructions. Removing
the semicolon makes asm length calculations more accurate, consequently
making scheduling and inlining decisions of the compiler more accurate.
Removing the semicolon also enables assembler checks involving "rep"
prefixes. Trying to assemble e.g. "rep addl %eax, %ebx" results in:
Error: invalid instruction `add' after `rep'
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Pavel Machek <pavel@kernel.org>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20250418071437.4144391-2-ubizjak@gmail.com
Minimum version of binutils required to compile the kernel is 2.25.
This version correctly handles the "rep" prefixes, so it is possible
to remove the semicolon, which was used to support ancient versions
of GNU as.
Due to the semicolon, the compiler considers "rep; insn" (or its
alternate "rep\n\tinsn" form) as two separate instructions. Removing
the semicolon makes asm length calculations more accurate, consequently
making scheduling and inlining decisions of the compiler more accurate.
Removing the semicolon also enables assembler checks involving "rep"
prefixes. Trying to assemble e.g. "rep addl %eax, %ebx" results in:
Error: invalid instruction `add' after `rep'
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Martin Mares <mj@ucw.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250418071437.4144391-1-ubizjak@gmail.com
Add support to emulate all NOP instructions as the original uprobe
instruction.
This change speeds up uprobe on top of all NOP instructions and is a
preparation for usdt probe optimization, that will be done on top of
NOP5 instructions.
With this change the usdt probe on top of NOP5s won't take the performance
hit compared to usdt probe on top of standard NOP instructions.
Suggested-by: Oleg Nesterov <oleg@redhat.com>
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Hao Luo <haoluo@google.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20250414083647.1234007-1-jolsa@kernel.org
CE4100 PCI specific code has no 'pci' suffix in the filename,
intel_mid_pci.c is the only one that duplicates the folder name in its
filename, drop that redundancy.
While at it, group the respective modules in the Makefile.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Link: https://patch.msgid.link/20250407070321.3761063-1-andriy.shevchenko@linux.intel.com
The "paravirt environment" is no longer in the tree. Axe that part of the
comment. Also add a blurb to remind readers that "USER_PMDS" refer to
the PTI user *copy* of the page tables, not the user *portion*.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20250414173240.5B1AB322%40davehans-spike.ostc.intel.com
There are a few too many levels of abstraction here.
First, just expand the PREALLOCATED_PMDS macro in place to make it
clear that it is only conditional on PTI.
Second, MAX_PREALLOCATED_PMDS is only used in one spot for an
on-stack allocation. It has a *maximum* value of 4. Do not bother
with the macro MAX() magic. Just set it to 4.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20250414173238.6E3CDA56%40davehans-spike.ostc.intel.com
Each mm_struct has its own copy of the page tables. When core mm code
makes changes to a copy of the page tables those changes sometimes
need to be synchronized with other mms' copies of the page tables. But
when this synchronization actually needs to happen is highly
architecture and configuration specific.
In cases where kernel PMDs are shared across processes
(SHARED_KERNEL_PMD) the core mm does not itself need to do that
synchronization for kernel PMD changes. The x86 code communicates
this by clearing the PGTBL_PMD_MODIFIED bit cleared in those
configs to avoid expensive synchronization.
The kernel is moving toward never sharing kernel PMDs on 32-bit.
Prepare for that and make 32-bit PAE always set PGTBL_PMD_MODIFIED,
even if there is no modification to synchronize. This obviously adds
some synchronization overhead in cases where the kernel page tables
are being changed.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20250414173237.EC790E95%40davehans-spike.ostc.intel.com
Kernel PMDs can either be shared across processes or private to a
process. On 64-bit, they are always shared. 32-bit non-PAE hardware
does not have PMDs, but the kernel logically squishes them into the
PGD and treats them as private. Here are the four cases:
64-bit: Shared
32-bit: non-PAE: Private
32-bit: PAE+ PTI: Private
32-bit: PAE+noPTI: Shared
Note that 32-bit is all "Private" except for PAE+noPTI being an
oddball. The 32-bit+PAE+noPTI case will be made like the rest of
32-bit shortly.
But until that can be done, temporarily treat the 32-bit+PAE+noPTI
case as Private. This will do unnecessary walks across pgd_list and
unnecessary PTE setting but should be otherwise harmless.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20250414173235.F63F50D1%40davehans-spike.ostc.intel.com
A hardware PAE PGD is only 32 bytes. A PGD is PAGE_SIZE in the other
paging modes. But for reasons*, the kernel _sometimes_ allocates a
whole page even though it only ever uses 32 bytes.
Make PAE less weird. Just allocate a page like the other paging modes.
This was already being done for PTI (and Xen in the past) and nobody
screamed that loudly about it so it can't be that bad.
* The original reason for PAGE_SIZE allocations for the PAE PGDs was
Xen's need to detect page table writes. But 32-bit PTI forced it too
for reasons I'm unclear about.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20250414173234.D34F0C3E%40davehans-spike.ostc.intel.com
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCaAEWhAAKCRCAXGG7T9hj
vne3AQCXbD8VtBJZEZ6h3sxRYLYpDHaJa5B0NTNUwgbVDPG/pgD/ad8c8iOomlWT
EllZmgwobkMwz0XZHDjsBfHIYjA4AgE=
=aDuc
-----END PGP SIGNATURE-----
Merge tag 'for-linus-6.15a-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fix from Juergen Gross:
"Just a single fix for the Xen multicall driver avoiding a percpu
variable referencing initdata by its initializer"
* tag 'for-linus-6.15a-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: fix multicall debug feature
The CONFIG_DEBUG_VM=y warning in switch_mm_irqs_off() started
triggering in testing:
VM_WARN_ON_ONCE(prev != &init_mm && !cpumask_test_cpu(cpu, mm_cpumask(prev)));
AFAIU what happens is that unuse_temporary_mm() clears the mm_cpumask()
for the current CPU, while switch_mm_irqs_off() then checks that the
mm_cpumask() bit is set for the current CPU.
While this behaviour hasn't really changed since the following commit:
209954cbc7 ("x86/mm/tlb: Update mm_cpumask lazily")
introduced both, but the warning is wrong, so remove it.
[ mingo: Patchified Peter's email. ]
Reported-by: syzbot+c2537ce72a879a38113e@syzkaller.appspotmail.com
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org
Link: https://lore.kernel.org/r/20250414135629.GA17910@noisy.programming.kicks-ass.net
Arch-PEBS retires IA32_PEBS_ENABLE and MSR_PEBS_DATA_CFG MSRs, so
intel_pmu_pebs_enable/disable() and intel_pmu_pebs_enable/disable_all()
are not needed to call for ach-PEBS.
To make the code cleaner, introduce static calls
x86_pmu_pebs_enable/disable() and x86_pmu_pebs_enable/disable_all()
instead of adding "x86_pmu.arch_pebs" check directly in these helpers.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20250415114428.341182-7-dapeng1.mi@linux.intel.com
Since architectural PEBS would be introduced in subsequent patches,
rename x86_pmu.pebs to x86_pmu.ds_pebs for distinguishing with the
upcoming architectural PEBS.
Besides restrict reserve_ds_buffers() helper to work only for the
legacy DS based PEBS and avoid it to corrupt the pebs_active flag and
release PEBS buffer incorrectly for arch-PEBS since the later patch
would reuse these flags and alloc/release_pebs_buffer() helpers for
arch-PEBS.
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20250415114428.341182-6-dapeng1.mi@linux.intel.com
Move x86_pmu.bts flag initialization into bts_init() from
intel_ds_init() and rename intel_ds_init() to intel_pebs_init() since it
fully initializes PEBS now after removing the x86_pmu.bts
initialization.
It's safe to move x86_pmu.bts into bts_init() since all x86_pmu.bts flag
are called after bts_init() execution.
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20250415114428.341182-5-dapeng1.mi@linux.intel.com
CPUID archPerfmonExt (0x23) leaves are supported to enumerate CPU
level's PMU capabilities on non-hybrid processors as well.
This patch supports to parse archPerfmonExt leaves on non-hybrid
processors. Architectural PEBS leverages archPerfmonExt sub-leaves 0x4
and 0x5 to enumerate the PEBS capabilities as well. This patch is a
precursor of the subsequent arch-PEBS enabling patches.
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20250415114428.341182-4-dapeng1.mi@linux.intel.com
From the PMU's perspective, Clearwater Forest is similar to the previous
generation Sierra Forest.
The key differences are the ARCH PEBS feature and the new added 3 fixed
counters for topdown L1 metrics events.
The ARCH PEBS is supported in the following patches. This patch provides
support for basic perfmon features and 3 new added fixed counters.
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20250415114428.341182-3-dapeng1.mi@linux.intel.com
From PMU's perspective, Panther Lake is similar to the previous
generation Lunar Lake. Both are hybrid platforms, with e-core and
p-core.
The key differences are the ARCH PEBS feature and several new events.
The ARCH PEBS is supported in the following patches.
The new events will be supported later in perf tool.
Share the code path with the Lunar Lake. Only update the name.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20250415114428.341182-2-dapeng1.mi@linux.intel.com
Currently when a user samples user space GPRs (--user-regs option) with
PEBS, the user space GPRs actually always come from software PMI
instead of from PEBS hardware. This leads to the sampled GPRs to
possibly be inaccurate for single PEBS record case because of the
skid between counter overflow and GPRs sampling on PMI.
For the large PEBS case, it is even worse. If user sets the
exclude_kernel attribute, large PEBS would be used to sample user space
GPRs, but since PEBS GPRs group is not really enabled, it leads to all
samples in the large PEBS record to share the same piece of user space
GPRs, like this reproducer shows:
$ perf record -e branches:pu --user-regs=ip,ax -c 100000 ./foo
$ perf report -D | grep "AX"
.... AX 0x000000003a0d4ead
.... AX 0x000000003a0d4ead
.... AX 0x000000003a0d4ead
.... AX 0x000000003a0d4ead
.... AX 0x000000003a0d4ead
.... AX 0x000000003a0d4ead
.... AX 0x000000003a0d4ead
.... AX 0x000000003a0d4ead
.... AX 0x000000003a0d4ead
.... AX 0x000000003a0d4ead
.... AX 0x000000003a0d4ead
So enable GPRs group for user space GPRs sampling and prioritize reading
GPRs from PEBS. If the PEBS sampled GPRs is not user space GPRs (single
PEBS record case), perf_sample_regs_user() modifies them to user space
GPRs.
[ mingo: Clarified the changelog. ]
Fixes: c22497f583 ("perf/x86/intel: Support adaptive PEBS v4")
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250415104135.318169-2-dapeng1.mi@linux.intel.com
The below code would always unconditionally clear other status bits like
perf metrics overflow bit once PEBS buffer overflows:
status &= intel_ctrl | GLOBAL_STATUS_TRACE_TOPAPMI;
This is incorrect. Perf metrics overflow bit should be cleared only when
fixed counter 3 in PEBS counter group. Otherwise perf metrics overflow
could be missed to handle.
Closes: https://lore.kernel.org/all/20250225110012.GK31462@noisy.programming.kicks-ass.net/
Fixes: 7b2c05a15d ("perf/x86/intel: Generic support for hardware TopDown metrics")
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250415104135.318169-1-dapeng1.mi@linux.intel.com
The scale of IIO bandwidth in free running counters is inherited from
the ICX. The counter increments for every 32 bytes rather than 4 bytes.
The IIO bandwidth out free running counters don't increment with a
consistent size. The increment depends on the requested size. It's
impossible to find a fixed increment. Remove it from the event_descs.
Fixes: 0378c93a92 ("perf/x86/intel/uncore: Support IIO free-running counters on Sapphire Rapids server")
Reported-by: Tang Jun <dukang.tj@alibaba-inc.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250416142426.3933977-3-kan.liang@linux.intel.com
There was a mistake in the ICX uncore spec too. The counter increments
for every 32 bytes rather than 4 bytes.
The same as SNR, there are 1 ioclk and 8 IIO bandwidth in free running
counters. Reuse the snr_uncore_iio_freerunning_events().
Fixes: 2b3b76b5ec ("perf/x86/intel/uncore: Add Ice Lake server uncore support")
Reported-by: Tang Jun <dukang.tj@alibaba-inc.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250416142426.3933977-2-kan.liang@linux.intel.com
There was a mistake in the SNR uncore spec. The counter increments for
every 32 bytes of data sent from the IO agent to the SOC, not 4 bytes
which was documented in the spec.
The event list has been updated:
"EventName": "UNC_IIO_BANDWIDTH_IN.PART0_FREERUN",
"BriefDescription": "Free running counter that increments for every 32
bytes of data sent from the IO agent to the SOC",
Update the scale of the IIO bandwidth in free running counters as well.
Fixes: 210cc5f9db ("perf/x86/intel/uncore: Add uncore support for Snow Ridge server")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250416142426.3933977-1-kan.liang@linux.intel.com
When building with CONFIG_LTO_CLANG, there is an error in the x86 boot
startup code because it builds with a different code model than the rest
of the kernel:
ld.lld: error: Function Import: link error: linking module flags 'Code Model': IDs have conflicting values: 'i32 2' from vmlinux.a(head64.o at 1302448), and 'i32 1' from vmlinux.a(map_kernel.o at 1314208)
ld.lld: error: Function Import: link error: linking module flags 'Code Model': IDs have conflicting values: 'i32 2' from vmlinux.a(common.o at 1306108), and 'i32 1' from vmlinux.a(gdt_idt.o at 1314148)
As this directory is for code that only runs during early system
initialization, LTO is not very important, so filter out the LTO flags
from KBUILD_CFLAGS for arch/x86/boot/startup to resolve the build error.
Fixes: 4cecebf200 ("x86/boot: Move the early GDT/IDT setup code into startup/")
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: llvm@lists.linux.dev
Link: https://lore.kernel.org/r/20250414-x86-boot-startup-lto-error-v1-1-7c8bed7c131c@kernel.org
Closes: https://lore.kernel.org/CA+G9fYvnun+bhYgtt425LWxzOmj+8Jf3ruKeYxQSx-F6U7aisg@mail.gmail.com/
The static key mmio_stale_data_clear controls the KVM-only mitigation for MMIO
Stale Data vulnerability. Rename it to reflect its purpose.
No functional change.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250416-mmio-rename-v2-1-ad1f5488767c@linux.intel.com
The original function name came from an overly compressed form of
'fpstate_regs' by commit:
e61d6310a0 ("x86/fpu: Reset permission and fpstate on exec()")
However, the term 'fpregs' typically refers to physical FPU registers. In
contrast, this function copies the init values to fpu->fpstate->regs, not
hardware registers.
Rename the function to better reflect what it actually does.
No functional change.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20250416021720.12305-11-chang.seok.bae@intel.com
The variable was previously referenced in KVM code but the last usage was
removed by:
ea4d6938d4 ("x86/fpu: Replace KVMs home brewed FPU copy from user")
Remove its export symbol.
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20250416021720.12305-10-chang.seok.bae@intel.com
The signal delivery logic was modified to always set the PKRU bit in
xregs_state->header->xfeatures by this commit:
ae6012d72f ("x86/pkeys: Ensure updated PKRU value is XRSTOR'd")
However, the change derives the bitmask value using XGETBV(1), rather
than simply updating the buffer that already holds the value. Thus, this
approach induces an unnecessary dependency on XGETBV1 for PKRU handling.
Eliminate the dependency by using the established helper function.
Subsequently, remove the now-unused 'mask' argument.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Aruna Ramakrishna <aruna.ramakrishna@oracle.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tony W Wang-oc <TonyWWang-oc@zhaoxin.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/20250416021720.12305-9-chang.seok.bae@intel.com
Currently, saving register states in the signal frame, the legacy feature
bits are always set in xregs_state->header->xfeatures. This code sequence
can be generalized for reuse in similar cases.
Refactor the logic to ensure a consistent approach across similar usages.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20250416021720.12305-8-chang.seok.bae@intel.com
Not all paths that lead to fpu__init_disable_system_xstate() currently
emit a message indicating that XSAVE has been disabled. Move the print
statement into the function to ensure the message in all cases.
Suggested-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250416021720.12305-7-chang.seok.bae@intel.com
With securing APX against conflicting MPX, it is now ready to be enabled.
Include APX in the enabled xfeature set.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20250416021720.12305-5-chang.seok.bae@intel.com
XSTATE components are architecturally independent. There is no rule
requiring their offsets in the non-compacted format to be strictly
ascending or mutually non-overlapping. However, in practice, such
overlaps have not occurred -- until now.
APX is introduced as xstate component 19, following AMX. In the
non-compacted XSAVE format, its offset overlaps with the space previously
occupied by the now-deprecated MPX feature:
45fc24e89b ("x86/mpx: remove MPX from arch/x86")
To prevent conflicts, the kernel must ensure the CPU never expose both
features at the same time. If so, it indicates unreliable hardware. In
such cases, XSAVE should be disabled entirely as a precautionary measure.
Add a sanity check to detect this condition and disable XSAVE if an
invalid hardware configuration is identified.
Note: MPX state components remain enabled on legacy systems solely for
KVM guest support.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20250416021720.12305-4-chang.seok.bae@intel.com
Advanced Performance Extensions (APX) is associated with a new state
component number 19. To support saving and restoring of the corresponding
registers via the XSAVE mechanism, introduce the component definition
along with the necessary sanity checks.
Define the new component number, state name, and those register data
type. Then, extend the size checker to validate the register data type
and explicitly list the APX feature flag as a dependency for the new
component in xsave_cpuid_features[].
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20250416021720.12305-3-chang.seok.bae@intel.com
Intel Advanced Performance Extensions (APX) introduce a new set of
general-purpose registers, managed as an extended state component via the
xstate management facility.
Before enabling this new xstate, define a feature flag to clarify the
dependency in xsave_cpuid_features[]. APX is enumerated under CPUID level
7 with EDX=1. Since this CPUID leaf is not yet allocated, place the flag
in a scattered feature word.
While this feature is intended only for userspace, exposing it via
/proc/cpuinfo is unnecessary. Instead, the existing arch_prctl(2)
mechanism with the ARCH_GET_XCOMP_SUPP option can be used to query the
feature availability.
Finally, clarify that APX depends on XSAVE.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20250416021720.12305-2-chang.seok.bae@intel.com
The x86 Poly1305 code never falls back to the generic code, so selecting
CRYPTO_LIB_POLY1305_GENERIC is unnecessary.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since crypto/poly1305.c now registers a poly1305-$(ARCH) shash algorithm
that uses the architecture's Poly1305 library functions, individual
architectures no longer need to do the same. Therefore, remove the
redundant shash algorithm from the arch-specific code and leave just the
library functions there.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Following the example of the crc32, crc32c, and chacha code, make the
crypto subsystem register both generic and architecture-optimized
poly1305 shash algorithms, both implemented on top of the appropriate
library functions. This eliminates the need for every architecture to
implement the same shash glue code.
Note that the poly1305 shash requires that the key be prepended to the
data, which differs from the library functions where the key is simply a
parameter to poly1305_init(). Previously this was handled at a fairly
low level, polluting the library code with shash-specific code.
Reorganize things so that the shash code handles this quirk itself.
Also, to register the architecture-optimized shashes only when
architecture-optimized code is actually being used, add a function
poly1305_is_arch_optimized() and make each arch implement it. Change
each architecture's Poly1305 module_init function to arch_initcall so
that the CPU feature detection is guaranteed to run before
poly1305_is_arch_optimized() gets called by crypto/poly1305.c. (In
cases where poly1305_is_arch_optimized() just returns true
unconditionally, using arch_initcall is not strictly needed, but it's
still good to be consistent across architectures.)
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Bartlett Lake has a P-core only product with Raptor Cove.
[ mingo: Switch around the define as pointed out by Christian Ludloff:
Ratpr Cove is the core, Bartlett Lake is the product.
Signed-off-by: Pi Xiange <xiange.pi@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Christian Ludloff <ludloff@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: "Ahmed S. Darwish" <darwi@linutronix.de>
Cc: x86-cpuid@lists.linux.dev
Link: https://lore.kernel.org/r/20250414032839.5368-1-xiange.pi@intel.com
Shorten X86_FEATURE_AMD_HETEROGENEOUS_CORES to X86_FEATURE_AMD_HTR_CORES
to make the last column aligned consistently in the whole file.
No functional changes.
Suggested-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250415175410.2944032-4-xin@zytor.com
Shorten X86_FEATURE_CLEAR_BHB_LOOP_ON_VMEXIT to
X86_FEATURE_CLEAR_BHB_VMEXIT to make the last column aligned
consistently in the whole file.
There's no need to explain in the name what the mitigation does.
No functional changes.
Suggested-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250415175410.2944032-3-xin@zytor.com
It is a special file with special formatting so remove one whitespace
damage and format newer defines like the rest.
No functional changes.
[ Xin: Do the same to tools/arch/x86/include/asm/cpufeatures.h. ]
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250415175410.2944032-2-xin@zytor.com
Whack this thing because:
- the "unknown" handling is done only for this vuln and not for the
others
- it doesn't do anything besides reporting things differently. It
doesn't apply any mitigations - it is simply causing unnecessary
complications to the code which don't bring anything besides
maintenance overhead to what is already a very nasty spaghetti pile
- all the currently unaffected CPUs can also be in "unknown" status so
there's no need for special handling here
so get rid of it.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: David Kaplan <david.kaplan@amd.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Link: https://lore.kernel.org/r/20250414150951.5345-1-bp@kernel.org
- There's no need for a newline after the SPDX line
- But there's a need for one before the closing header guard.
Collect AMD specific platform header files in <asm/amd/*.h>.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Carlos Bilbao <carlos.bilbao@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mario Limonciello <superm1@kernel.org>
Cc: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Link: https://lore.kernel.org/r/20250413084144.3746608-6-mingo@kernel.org
A few uses of 'fps' snuck in, which is rather confusing
(to me) as it suggests frames-per-second. ;-)
Rename them to the canonical 'fpstate' name.
No change in functionality.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Chang S. Bae <chang.seok.bae@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250409211127.3544993-9-mingo@kernel.org
init_task's FPU state initialization was a bit of a hack:
__x86_init_fpu_begin = .;
. = __x86_init_fpu_begin + 128*PAGE_SIZE;
__x86_init_fpu_end = .;
But the init task isn't supposed to be using the FPU context
in any case, so remove the hack and add in some debug warnings.
As Linus noted in the discussion, the init task (and other
PF_KTHREAD tasks) *can* use the FPU via kernel_fpu_begin()/_end(),
but they don't need the context area because their FPU use is not
preemptible or reentrant, and they don't return to user-space.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Chang S. Bae <chang.seok.bae@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Uros Bizjak <ubizjak@gmail.com>
Link: https://lore.kernel.org/r/20250409211127.3544993-8-mingo@kernel.org
fpu__drop() and arch_release_task_struct() calls x86_task_fpu()
unconditionally, while the FPU context area will not be present
if it's the init task, and should not be in use when it's some
other type of kthread.
Return early for PF_KTHREAD or PF_USER_WORKER tasks. The debug
warning in x86_task_fpu() will catch any kthreads attempting to
use the FPU save area.
Fixed-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250409211127.3544993-7-mingo@kernel.org
This encapsulates the fpu__drop() functionality better, and it
will also enable other changes that want to check a task for
PF_KTHREAD before calling x86_task_fpu().
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Chang S. Bae <chang.seok.bae@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250409211127.3544993-6-mingo@kernel.org
As suggested by Oleg, remove the thread::fpu pointer, as we can
calculate it via x86_task_fpu() at compile-time.
This improves code generation a bit:
kepler:~/tip> size vmlinux.before vmlinux.after
text data bss dec hex filename
26475405 10435342 1740804 38651551 24dc69f vmlinux.before
26475339 10959630 1216516 38651485 24dc65d vmlinux.after
Suggested-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Chang S. Bae <chang.seok.bae@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Uros Bizjak <ubizjak@gmail.com>
Link: https://lore.kernel.org/r/20250409211127.3544993-5-mingo@kernel.org
Turn thread.fpu into a pointer. Since most FPU code internals work by passing
around the FPU pointer already, the code generation impact is small.
This allows us to remove the old kludge of task_struct being variable size:
struct task_struct {
...
/*
* New fields for task_struct should be added above here, so that
* they are included in the randomized portion of task_struct.
*/
randomized_struct_fields_end
/* CPU-specific state of this task: */
struct thread_struct thread;
/*
* WARNING: on x86, 'thread_struct' contains a variable-sized
* structure. It *MUST* be at the end of 'task_struct'.
*
* Do not put anything below here!
*/
};
... which creates a number of problems, such as requiring thread_struct to be
the last member of the struct - not allowing it to be struct-randomized, etc.
But the primary motivation is to allow the decoupling of task_struct from
hardware details (<asm/processor.h> in particular), and to eventually allow
the per-task infrastructure:
DECLARE_PER_TASK(type, name);
...
per_task(current, name) = val;
... which requires task_struct to be a constant size struct.
The fpu_thread_struct_whitelist() quirk to hardened usercopy can be removed,
now that the FPU structure is not embedded in the task struct anymore, which
reduces text footprint a bit.
Fixed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Chang S. Bae <chang.seok.bae@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250409211127.3544993-4-mingo@kernel.org
This will make the removal of the task_struct::thread.fpu array
easier.
No change in functionality - code generated before and after this
commit is identical on x86-defconfig:
kepler:~/tip> diff -up vmlinux.before.asm vmlinux.after.asm
kepler:~/tip>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Chang S. Bae <chang.seok.bae@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20250409211127.3544993-3-mingo@kernel.org
The per-task FPU context/save area is allocated right
next to task_struct, currently in a variable-size
array via task_struct::thread.fpu[], but we plan to
fully hide it from the C type scope.
Introduce the x86_task_fpu() accessor that gets to the
FPU context pointer explicitly from the task pointer.
Right now this is a simple (task)->thread.fpu wrapper.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Chang S. Bae <chang.seok.bae@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250409211127.3544993-2-mingo@kernel.org
== Background ==
As feature positions in the userspace XSAVE buffer do not always align
with their feature numbers, the XSAVE format conversion needs to be
reconsidered to align with the revised xstate size calculation logic.
* For signal handling, XSAVE and XRSTOR are used directly to save and
restore extended registers.
* For ptrace, KVM, and signal returns (for 32-bit frame), the kernel
copies data between its internal buffer and the userspace XSAVE buffer.
If memcpy() were used for these cases, existing offset helpers — such
as __raw_xsave_addr() or xstate_offsets[] — would be sufficient to
handle the format conversion.
== Problem ==
When copying data from the compacted in-kernel buffer to the
non-compacted userspace buffer, the function follows the
user_regset_get2_fn() prototype. This means it utilizes struct membuf
helpers for the destination buffer. As defined in regset.h, these helpers
update the memory pointer during the copy process, enforcing sequential
writes within the loop.
Since xstate components are processed sequentially, any component whose
buffer position does not align with its feature number has an issue.
== Solution ==
Replace for_each_extended_xfeature() with the newly introduced
for_each_extended_xfeature_in_order(). This macro ensures xstate
components are handled in the correct order based on their actual
positions in the destination buffer, rather than their feature numbers.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20250320234301.8342-5-chang.seok.bae@intel.com
The current xstate size calculation assumes that the highest-numbered
xstate feature has the highest offset in the buffer, determining the size
based on the topmost bit in the feature mask. However, this assumption is
not architecturally guaranteed -- higher-numbered features may have lower
offsets.
With the introduction of the xfeature order table and its helper macro,
xstate components can now be traversed in their positional order. Update
the non-compacted format handling to iterate through the table to
determine the last-positioned feature. Then, set the offset accordingly.
Since size calculation primarily occurs during initialization or in
non-critical paths, looping to find the last feature is not expected to
have a meaningful performance impact.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20250320234301.8342-4-chang.seok.bae@intel.com
The kernel has largely assumed that higher xstate component numbers
correspond to later offsets in the buffer. However, this assumption no
longer holds for the non-compacted format, where a newer state component
may have a lower offset.
When iterating over xstate components in offset order, using the feature
number as an index may be misleading. At the same time, the CPU exposes
each component’s size and offset based on its feature number, making it a
key for state information.
To provide flexibility in handling xstate ordering, introduce a mapping
table: feature order -> feature number. The table is dynamically
populated based on the CPU-exposed features and is sorted in offset order
at boot time.
Additionally, add an accessor macro to facilitate sequential traversal of
xstate components based on their actual buffer positions, given a feature
bitmask. This accessor macro will be particularly useful for computing
custom non-compacted format sizes and iterating over xstate offsets in
non-compacted buffers.
Suggested-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20250320234301.8342-3-chang.seok.bae@intel.com
Traditionally, new xstate components have been assigned sequentially,
aligning feature numbers with their offsets in the XSAVE buffer. However,
this ordering is not architecturally mandated in the non-compacted
format, where a component's offset may not correspond to its feature
number.
The kernel caches CPUID-reported xstate component details, including size
and offset in the non-compacted format. As part of this process, a sanity
check is also conducted to ensure alignment between feature numbers and
offsets.
This check was likely intended as a general guideline rather than a
strict requirement. Upcoming changes will support out-of-order offsets.
Remove the check as becoming obsolete.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20250320234301.8342-2-chang.seok.bae@intel.com
Use struct_size() to calculate the number of bytes to allocate for a new
bts_buffer. Compared to offsetof(), struct_size() provides additional
compile-time checks (e.g., __must_be_array()).
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250413104108.49142-2-thorsten.blum@linux.dev
To reduce the impact of the API renames in -next, add compatibility
wrappers for the two most popular MSR access APIs: rdmsrl() and wrmsrl().
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Xin Li <xin@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org
Since objtool's inception, frame pointer warnings have been manually
silenced for __arch_hweight*() to allow those functions' inline asm to
avoid using ASM_CALL_CONSTRAINT.
The potentially dubious reasoning for that decision over nine years ago
was that since !X86_FEATURE_POPCNT is exceedingly rare, it's not worth
hurting the code layout for a function call that will never happen on
the vast majority of systems.
However, those functions actually started using ASM_CALL_CONSTRAINT with
the following commit:
194a613088 ("x86/hweight: Use ASM_CALL_CONSTRAINT in inline asm()")
And rightfully so, as it makes the code correct. ASM_CALL_CONSTRAINT
will soon have no effect for non-FP configs anyway.
With ASM_CALL_CONSTRAINT in place, ANNOTATE_IGNORE_ALTERNATIVE no longer
has a purpose for the hweight functions. Remove it.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/e7070dba3278c90f1a836b16157dcd34ccd21e21.1744318586.git.jpoimboe@kernel.org
Refer __percpu_prefix to __force_percpu_prefix to avoid duplicate
definition. While there, slightly reorder definitions to a more
logical sequence, remove unneeded double quotes and move misplaced
comment to the right place.
No functional changes intended.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Link: https://lore.kernel.org/r/20250411093130.81389-1-ubizjak@gmail.com
All Zen5 machines out there should get BIOS updates which update to the
correct microcode patches addressing the microcode signature issue.
However, silly people carve out random microcode blobs from BIOS
packages and think are doing other people a service this way...
Block loading of any unreleased standalone Zen5 microcode patches.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: <stable@kernel.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Cc: Nikolay Borisov <nik.borisov@suse.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20250410114222.32523-1-bp@kernel.org
Prepare for splitting off parts of the SEV core.c source file into a
file that carries code that must tolerate being called from the early
1:1 mapping. This will allow special build-time handling of thise code,
to ensure that it gets generated in a way that is compatible with the
early execution context.
So create a de-facto internal SEV API and put the definitions into
sev-internal.h. No attempt is made to allow this header file to be
included in arbitrary other sources - this is explicitly not the intent.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-efi@vger.kernel.org
Link: https://lore.kernel.org/r/20250410134117.3713574-20-ardb+git@google.com
RIP_REL_REF() has no effect on code residing in arch/x86/boot/startup,
as it is built with -fPIC. So remove any occurrences from the SME
startup code.
Note the SME is the only caller of cc_set_mask() that requires this, so
drop it from there as well.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-efi@vger.kernel.org
Link: https://lore.kernel.org/r/20250410134117.3713574-19-ardb+git@google.com
Move the SME initialization code, which runs from the 1:1 mapping of
memory as it operates on the kernel virtual mapping, into the new
sub-directory arch/x86/boot/startup/ where all startup code will reside
that needs to tolerate executing from the 1:1 mapping.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-efi@vger.kernel.org
Link: https://lore.kernel.org/r/20250410134117.3713574-18-ardb+git@google.com
Now that __startup_64() is built using -fPIC, RIP_REL_REF() has become a
NOP and can be removed. Only some occurrences of rip_rel_ptr() will
remain, to explicitly take the address of certain global structures in
the 1:1 mapping of memory.
While at it, update the code comment to describe why this is needed.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-efi@vger.kernel.org
Link: https://lore.kernel.org/r/20250410134117.3713574-17-ardb+git@google.com
The startup code that constructs the kernel virtual mapping runs from
the 1:1 mapping of memory itself, and therefore, cannot use absolute
symbol references. Before making changes in subsequent patches, move
this code into a separate source file under arch/x86/boot/startup/ where
all such code will be kept from now on.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-efi@vger.kernel.org
Link: https://lore.kernel.org/r/20250410134117.3713574-16-ardb+git@google.com
Move the early GDT/IDT setup code that runs long before the kernel
virtual mapping is up into arch/x86/boot/startup/, and build it in a way
that ensures that the code tolerates being called from the 1:1 mapping
of memory. The code itself is left unchanged by this patch.
Also tweak the sed symbol matching pattern in the decompressor to match
on lower case 't' or 'b', as these will be emitted by Clang for symbols
with hidden linkage.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-efi@vger.kernel.org
Link: https://lore.kernel.org/r/20250410134117.3713574-15-ardb+git@google.com
RIP_REL_REF() is used in non-PIC C code that is called very early,
before the kernel virtual mapping is up, which is the mapping that the
linker expects. It is currently used in two different ways:
- to refer to the value of a global variable, including as an lvalue in
assignments;
- to take the address of a global variable via the mapping that the code
currently executes at.
The former case is only needed in non-PIC code, as PIC code will never
use absolute symbol references when the address of the symbol is not
being used. But taking the address of a variable in PIC code may still
require extra care, as a stack allocated struct assignment may be
emitted as a memcpy() from a statically allocated copy in .rodata.
For instance, this
void startup_64_setup_gdt_idt(void)
{
struct desc_ptr startup_gdt_descr = {
.address = (__force unsigned long)gdt_page.gdt,
.size = GDT_SIZE - 1,
};
may result in an absolute symbol reference in PIC code, even though the
struct is allocated on the stack and populated at runtime.
To address this case, make rip_rel_ptr() accessible in PIC code, and
update any existing uses where the address of a global variable is
taken using RIP_REL_REF.
Once all code of this nature has been moved into arch/x86/boot/startup
and built with -fPIC, RIP_REL_REF() can be retired, and only
rip_rel_ptr() will remain.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-efi@vger.kernel.org
Link: https://lore.kernel.org/r/20250410134117.3713574-14-ardb+git@google.com
We gain nothing by having the core code enable IRQs right before calling
activate_mm() only for us to turn them right back off again in switch_mm().
This will save a few cycles, so execve() should be blazingly fast with this
patch applied!
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/r/20250402094540.3586683-8-mingo@kernel.org
This should be considerably more robust. It's also necessary for optimized
for_each_possible_lazymm_cpu() on x86 -- without this patch, EFI calls in
lazy context would remove the lazy mm from mm_cpumask().
[ mingo: Merged it on top of x86/alternatives ]
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/r/20250402094540.3586683-7-mingo@kernel.org
EFI runtime services should use temporary MMs, but EFI runtime services
want IRQs on. Preemption must still be disabled in a temporary MM context.
At some point, the entirely temporary MM mechanism should be moved out of
arch code.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250402094540.3586683-6-mingo@kernel.org
Now that unuse_temporary_mm() lives in tlb.c it can access
cpu_tlbstate.loaded_mm.
[ mingo: Merged it on top of x86/alternatives ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/r/20250402094540.3586683-5-mingo@kernel.org
This prepares them for use outside of the alternative machinery.
The code is unchanged.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/r/20250402094540.3586683-4-mingo@kernel.org
When decoding an instruction or handling a perf event that references an
LDT segment, if we don't have a valid user context, trying to access the
LDT by any means other than SLDT is racy. Certainly, using
current->active_mm is wrong, as active_mm can point to a real user mm when
CR3 and LDTR no longer reference that mm.
Clean up the code. If nmi_uaccess_okay() says we don't have a valid
context, just fail. Otherwise use current->mm.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/r/20250402094540.3586683-3-mingo@kernel.org
In commit 209954cbc7 ("x86/mm/tlb: Update mm_cpumask lazily")
unuse_temporary_mm() grew the assumption that it gets used on
poking_mm exclusively. While this is currently true, lets not hard
code this assumption.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/r/20250402094540.3586683-2-mingo@kernel.org
Hypercall detection is failing with xen_hypercall_intel() chosen even on
an AMD processor. Looking at the disassembly, the call to
xen_get_vendor() was removed.
The check for boot_cpu_has(X86_FEATURE_CPUID) was used as a proxy for
the x86_vendor having been set.
When CONFIG_X86_REQUIRED_FEATURE_CPUID=y (the default value), DCE eliminates
the call to xen_get_vendor(). An uninitialized value 0 means
X86_VENDOR_INTEL, so the Intel function is always returned.
Remove the if and always call xen_get_vendor() to avoid this issue.
Fixes: 3d37d9396e ("x86/cpufeatures: Add {REQUIRED,DISABLED} feature configs")
Suggested-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Jason Andryuk <jason.andryuk@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Xin Li (Intel)" <xin@zytor.com>
Link: https://lore.kernel.org/r/20250410193106.16353-1-jason.andryuk@amd.com
Reference header files using their canonical form <linux/cacheinfo.h>.
Standardize on CPUID(0xN), instead of CPUID(N), for all standard leaves.
This removes ambiguity and aligns them with their extended counterparts
like CPUID(0x8000001d).
References: 0dd09e215a ("x86/cacheinfo: Apply maintainer-tip coding style fixes")
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: John Ogness <john.ogness@linutronix.de>
Link: https://lore.kernel.org/r/20250411070401.1358760-3-darwi@linutronix.de
The CPUID(0x2) cache descriptors iterator at <cpuid/leaf_0x2_api.h>:
for_each_leaf_0x2_desc()
has no more call sites. Remove it.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250411070401.1358760-2-darwi@linutronix.de
Simplify the alternatives interface some more by moving the
poke_batch_finish check into poke_batch_process and renaming the latter.
The net effect is one less function name to consider when reading the
code.
Signed-off-by: Nikolay Borisov <nik.borisov@suse.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-54-mingo@kernel.org
- Capitalize 'INT3' consistently,
- make it clear that 'sync cores' means an SMP sync to all CPUs,
- fix typos and spelling.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-51-mingo@kernel.org
It only has a single user left, merge it into smp_text_poke_batch_add()
and remove the helper function.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-50-mingo@kernel.org
Move it from the middle of a .c file next to the similar declarations
of __alt_instructions[] et al.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-49-mingo@kernel.org
We accumulated lots of unnecessary header inclusions over the years,
trim them.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-48-mingo@kernel.org
- No need to cast over to 'struct smp_text_poke_loc *', void * is just fine
for a binary search,
- Use the canonical (a, b) input parameter nomenclature of cmp_func_t
functions and rename the input parameters from (tp, elt) to
(tpl_a, tpl_b).
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-44-mingo@kernel.org
This will also allow the simplification of patch_cmp().
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-43-mingo@kernel.org
- Use direct 'void *' pointer comparison, there's no
need to force the type to 'unsigned long'.
- Remove the 'tp' local variable indirection
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-42-mingo@kernel.org
Unlike sync_core(), text_poke_sync() is a very heavy operation, as
it sends an IPI to every online CPU in the system and waits for
completion.
Reflect this in the name.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-41-mingo@kernel.org
At this point smp_text_poke_single(addr, opcode, len, emulate) is equivalent to:
smp_text_poke_batch_add(addr, opcode, len, emulate);
smp_text_poke_batch_finish();
So remove the restriction on mixing single-instruction patching
with multi-instruction patching.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-37-mingo@kernel.org
This function is now using the text_poke_array state exclusively,
make that explicit by removing the redundant input parameters.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-34-mingo@kernel.org
There's no need to return a pointer on success - it's always
the same pointer.
Return a bool instead.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-32-mingo@kernel.org
Just like with try_get_text_poke_array(), this name better reflects
what the underlying code is doing, there's no 'descriptor'
indirection anymore.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-31-mingo@kernel.org
At this point we are always working out of an uptodate
text_poke_array, there's no need for smp_text_poke_int3_handler()
to read via the int3_vec indirection - remove it.
This simplifies the code:
1 file changed, 5 insertions(+), 15 deletions(-)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-29-mingo@kernel.org
struct text_poke_array is an equivalent structure to these global variables:
static struct smp_text_poke_loc tp_vec[TP_VEC_MAX];
static int tp_vec_nr;
Note that we intentionally mirror much of the naming of
'struct text_poke_int3_vec', which will further highlight
the unecessary layering going on in this code, and will
ease its removal.
No change in functionality.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-28-mingo@kernel.org
At this point the 'tp' input parameter must always be the
global 'tp_vec' array, and 'nr_entries' must always be equal
to 'tp_vec_nr'.
Assert these conditions - which will allow the removal of
a layer of indirection between these values.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-27-mingo@kernel.org
Instead of constructing a vector on-stack, just use the already
available batch-patching vector - which should always be empty
at this point.
This will allow subsequent simplifications.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-25-mingo@kernel.org
There's this weird hack used by smp_text_poke_batch_finish() to indicate
a 'forced flush':
smp_text_poke_batch_flush(NULL);
Just open-code the vector-flush in a straightforward fashion:
smp_text_poke_batch_process(tp_vec, tp_vec_nr);
tp_vec_nr = 0;
And get rid of !addr hack from text_poke_addr_ordered().
Leave a WARN_ON_ONCE(), just in case some external code learned
to rely on this behavior.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-24-mingo@kernel.org
tp_order_fail() uses inverted logic: it returns true in case something
is false, which is only a plus at the IOCCC.
Instead rename it to regular parity as 'text_poke_addr_ordered()',
and adjust the code accordingly.
Also add a comment explaining how the address ordering should be
understood.
No change in functionality intended.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-23-mingo@kernel.org
It's possible to escape the text_mutex-held assert in
smp_text_poke_batch_process() if the caller uses a properly
batched and sorted series of patch requests, so add
an explicit lockdep_assert_held() to make sure it's
held by all callers.
All text_poke_int3_*() APIs will call either smp_text_poke_batch_process()
or smp_text_poke_batch_flush() internally.
The text_mutex must be held, because tp_vec and tp_vec_nr et al
are all globals, and the INT3 patching machinery itself relies on
external serialization.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-22-mingo@kernel.org
Make it clear that this structure is part of the INT3 based
SMP patching facility, not the regular text_poke*() MM-switch
based facility.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-19-mingo@kernel.org
This name is actively confusing as well, because the simple text_poke*()
APIs use MM-switching based code patching, while text_poke_loc_init()
is part of the INT3 based text_poke_int3_*() machinery that is an
additional layer of functionality on top of regular text_poke*() functionality.
Rename it to text_poke_int3_loc_init() to make it clear which layer
it belongs to.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-18-mingo@kernel.org
This name is actively confusing as well, because the simple text_poke*()
APIs use MM-switching based code patching, while text_poke_queue()
is part of the INT3 based text_poke_int3_*() machinery that is an
additional layer of functionality on top of regular text_poke*() functionality.
Rename it to smp_text_poke_batch_add() to make it clear which layer
it belongs to.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-17-mingo@kernel.org
This name is actively confusing as well, because the simple text_poke*()
APIs use MM-switching based code patching, while text_poke_finish()
is part of the INT3 based text_poke_int3_*() machinery that is an
additional layer of functionality on top of regular text_poke*() functionality.
Rename it to smp_text_poke_batch_finish() to make it clear which layer
it belongs to.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-16-mingo@kernel.org
This name is actually actively confusing, because the simple text_poke*()
APIs use MM-switching based code patching, while text_poke_flush()
is part of the INT3 based text_poke_int3_*() machinery that is an
additional layer of functionality on top of regular text_poke*() functionality.
Rename it to smp_text_poke_batch_flush() to make it clear which layer
it belongs to.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-15-mingo@kernel.org
So the temp_mm_state_t abstraction used by use_temporary_mm() and
unuse_temporary_mm() is super confusing:
- The whole machinery is about temporarily switching to the
text_poke_mm utility MM that got allocated during bootup
for text-patching purposes alone:
temp_mm_state_t prev;
/*
* Loading the temporary mm behaves as a compiler barrier, which
* guarantees that the PTE will be set at the time memcpy() is done.
*/
prev = use_temporary_mm(text_poke_mm);
- Yet the value that gets saved in the temp_mm_state_t variable
is not the temporary MM ... but the previous MM...
- Ie. we temporarily put the non-temporary MM into a variable
that has the temp_mm_state_t type. This makes no sense whatsoever.
- The confusion continues in unuse_temporary_mm():
static inline void unuse_temporary_mm(temp_mm_state_t prev_state)
Here we unuse an MM that is ... not the temporary MM, but the
previous MM. :-/
Fix up all this confusion by removing the unnecessary layer of
abstraction and using a bog-standard 'struct mm_struct *prev_mm'
variable to save the MM to.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-14-mingo@kernel.org
The idtentry macro in entry_64.S hasn't had a create_gap
option for 5 years - update the comment.
(Also clean up the entire comment block while at it.)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-13-mingo@kernel.org
Put it into the text_poke_* namespace of <asm/text-patching.h>.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-10-mingo@kernel.org
Put it into the text_poke_* namespace of <asm/text-patching.h>.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-9-mingo@kernel.org
All related functions in this subsystem already have a
text_poke_int3_ prefix - add it to the trap handler
as well.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-8-mingo@kernel.org
Make it clear that these reference counts lock access
to text_poke_array.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-5-mingo@kernel.org
Follow the INT3 text-poking nomenclature, and also adopt the
'vector' name for the entire object, instead of the rather
opaque 'descriptor' naming.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-4-mingo@kernel.org
eBPF programs can be run 50,000,000 times per second on busy servers.
Whenever /proc/sys/kernel/bpf_stats_enabled is turned off,
hundreds of calls sites are patched from text_poke_bp_batch()
and we see a huge loss of performance due to false sharing
on bp_desc.refs lasting up to three seconds.
51.30% server_bin [kernel.kallsyms] [k] poke_int3_handler
|
|--46.45%--poke_int3_handler
| exc_int3
| asm_exc_int3
| |
| |--24.26%--cls_bpf_classify
| | tcf_classify
| | __dev_queue_xmit
| | ip6_finish_output2
| | ip6_output
| | ip6_xmit
| | inet6_csk_xmit
| | __tcp_transmit_skb
Fix this by replacing bp_desc.refs with a per-cpu bp_refs.
Before the patch, on a host with 240 cores (480 threads):
$ sysctl -wq kernel.bpf_stats_enabled=0
text_poke_bp_batch(nr_entries=164) : Took 2655300 usec
$ bpftool prog | grep run_time_ns
...
105: sched_cls name hn_egress tag 699fc5eea64144e3 gpl run_time_ns
3009063719 run_cnt 82757845 : average cost is 36 nsec per call
After this patch:
$ sysctl -wq kernel.bpf_stats_enabled=0
text_poke_bp_batch(nr_entries=164) : Took 702 usec
$ bpftool prog | grep run_time_ns
...
105: sched_cls name hn_egress tag 699fc5eea64144e3 gpl run_time_ns
1928223019 run_cnt 67682728 : average cost is 28 nsec per call
Ie. text-patching performance improved 3700x: from 2.65 seconds
to 0.0007 seconds.
Since the atomic_cond_read_acquire(refs, !VAL) spin-loop was not triggered
even once in my tests, add an unlikely() annotation, because this appears
to be the common case.
[ mingo: Improved the changelog some more. ]
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20250411054105.2341982-2-mingo@kernel.org
Initializing a percpu variable with the address of a struct tagged as
.initdata is breaking the build with CONFIG_SECTION_MISMATCH_WARN_ONLY
not set to "y".
Fix that by using an access function instead returning the .initdata
struct address if the percpu space of the struct hasn't been
allocated yet.
Fixes: 368990a7fe ("xen: fix multicall debug data referencing")
Reported-by: Borislav Petkov <bp@alien8.de>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: "Borislav Petkov (AMD)" <bp@alien8.de>
Tested-by: "Borislav Petkov (AMD)" <bp@alien8.de>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20250327190602.26015-1-jgross@suse.com>
There's a lockdep false positive warning related to i8253_lock:
WARNING: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected
...
systemd-sleep/3324 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
ffffffffb2c23398 (i8253_lock){+.+.}-{2:2}, at: pcspkr_event+0x3f/0xe0 [pcspkr]
...
... which became HARDIRQ-irq-unsafe at:
...
lock_acquire+0xd0/0x2f0
_raw_spin_lock+0x30/0x40
clockevent_i8253_disable+0x1c/0x60
pit_timer_init+0x25/0x50
hpet_time_init+0x46/0x50
x86_late_time_init+0x1b/0x40
start_kernel+0x962/0xa00
x86_64_start_reservations+0x24/0x30
x86_64_start_kernel+0xed/0xf0
common_startup_64+0x13e/0x141
...
Lockdep complains due pit_timer_init() using the lock in an IRQ-unsafe
fashion, but it's a false positive, because there is no deadlock
possible at that point due to init ordering: at the point where
pit_timer_init() is called there is no other possible usage of
i8253_lock because the system is still in the very early boot stage
with no interrupts.
But in any case, pit_timer_init() should disable interrupts before
calling clockevent_i8253_disable() out of general principle, and to
keep lockdep working even in this scenario.
Use scoped_guard() for that, as suggested by Thomas Gleixner.
[ mingo: Cleaned up the changelog. ]
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/Z-uwd4Bnn7FcCShX@gmail.com
- Fix CPU topology related regression that limited
Xen PV guests to a single CPU
- Fix ancient e820__register_nosave_regions() bugs that
were causing problems with kexec's artificial memory
maps
- Fix an S4 hibernation crash caused by two missing ENDBR's that
were mistakenly removed in a recent commit
- Fix a resctrl serialization bug
- Fix early_printk documentation and comments
- Fix RSB bugs, combined with preparatory updates to better
match the code to vendor recommendations.
- Add RSB mitigation document
- Fix/update documentation
- Fix the erratum_1386_microcode[] table to be NULL terminated
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=1DWX
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2025-04-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 fixes from Ingo Molnar:
- Fix CPU topology related regression that limited Xen PV guests to a
single CPU
- Fix ancient e820__register_nosave_regions() bugs that were causing
problems with kexec's artificial memory maps
- Fix an S4 hibernation crash caused by two missing ENDBR's that were
mistakenly removed in a recent commit
- Fix a resctrl serialization bug
- Fix early_printk documentation and comments
- Fix RSB bugs, combined with preparatory updates to better match the
code to vendor recommendations.
- Add RSB mitigation document
- Fix/update documentation
- Fix the erratum_1386_microcode[] table to be NULL terminated
* tag 'x86-urgent-2025-04-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ibt: Fix hibernate
x86/cpu: Avoid running off the end of an AMD erratum table
Documentation/x86: Zap the subsection letters
Documentation/x86: Update the naming of CPU features for /proc/cpuinfo
x86/bugs: Add RSB mitigation document
x86/bugs: Don't fill RSB on context switch with eIBRS
x86/bugs: Don't fill RSB on VMEXIT with eIBRS+retpoline
x86/bugs: Fix RSB clearing in indirect_branch_prediction_barrier()
x86/bugs: Use SBPB in write_ibpb() if applicable
x86/bugs: Rename entry_ibpb() to write_ibpb()
x86/early_printk: Use 'mmio32' for consistency, fix comments
x86/resctrl: Fix rdtgroup_mkdir()'s unlocked use of kernfs_node::name
x86/e820: Fix handling of subpage regions when calculating nosave ranges in e820__register_nosave_regions()
x86/acpi: Don't limit CPUs to 1 for Xen PV guests due to disabled ACPI
SNP platform can provide a vTPM device emulated by SVSM.
The "tpm-svsm" device can be handled by the platform driver registered by the
x86/sev core code.
Register the platform device only when SVSM is available and it supports vTPM
commands as checked by snp_svsm_vtpm_probe().
[ bp: Massage commit message. ]
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lore.kernel.org/r/20250410135118.133240-5-sgarzare@redhat.com
Add two new functions to probe and send commands to the SVSM vTPM. They
leverage the two calls defined by the AMD SVSM specification [1] for the vTPM
protocol: SVSM_VTPM_QUERY and SVSM_VTPM_CMD.
Expose snp_svsm_vtpm_send_command() to be used by a TPM driver.
[1] "Secure VM Service Module for SEV-SNP Guests"
Publication # 58019 Revision: 1.00
[ bp: Some doc touchups. ]
Co-developed-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Co-developed-by: Claudio Carvalho <cclaudio@linux.ibm.com>
Signed-off-by: Claudio Carvalho <cclaudio@linux.ibm.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lore.kernel.org/r/20250403100943.120738-2-sgarzare@redhat.com
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCZ/eJDgAKCRCAXGG7T9hj
vrq5AQD0H1br5/vq0LIYrf22CwHIp/o7zfSPjpoEccwLRDRVZQEA9KW+pnFTYBpL
d29PeC2oGPjNsS9sL0b0DgYBD/JStQ0=
=c9Cv
-----END PGP SIGNATURE-----
Merge tag 'for-linus-6.15a-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- A simple fix adding the module description of the Xenbus frontend
module
- A fix correcting the xen-acpi-processor Kconfig dependency for PVH
Dom0 support
- A fix for the Xen balloon driver when running as Xen Dom0 in PVH mode
- A fix for PVH Dom0 in order to avoid problems with CPU idle and
frequency drivers conflicting with Xen
* tag 'for-linus-6.15a-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen: disable CPU idle and frequency drivers for PVH dom0
x86/xen: fix balloon target initialization for PVH dom0
xen: Change xen-acpi-processor dom0 dependency
xenbus: add module description
Reduce the window during which exceptions are unhandled, by leaving the
GDT/IDT in place all the way into the relocate_kernel() function, until
the moment that %cr3 gets replaced.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250326142404.256980-4-dwmw2@infradead.org
This supports the same 32-bit MMIO-mapped 8250 as the early_printk code.
It's not clear why the early_printk code supports this form and only this
form; the actual runtime 8250_pci doesn't seem to support it. But having
hacked up QEMU to expose such a device, early_printk does work with it,
and now so does the kexec debug code.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250326142404.256980-3-dwmw2@infradead.org
If a serial port was configured for early_printk, use it for debug output
from the relocate_kernel exception handler too.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250326142404.256980-2-dwmw2@infradead.org
This is the customary type used for hardware ABIs.
Suggested-by: Xin Li <xin@zytor.com>
Suggested-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
In <asm/msr.h> the first parameter of do_trace_rdpmc() is named 'msr':
extern void do_trace_rdpmc(unsigned int msr, u64 val, int failed);
But in the definition it's 'counter':
void do_trace_rdpmc(unsigned counter, u64 val, int failed)
Use 'msr' in both cases, and change the type to u32.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Xin Li <xin@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
The paravirt_read_pmc() result is in fact only loaded into an u64 variable.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Xin Li <xin@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Also fix some nearby whitespace damage while at it.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Xin Li <xin@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
There's 9 uses of 'unsigned long long' in <asm/msr.h>, which is
really the same as 'u64', which is used 34 times.
Standardize on u64.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Xin Li <xin@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
GCC PR82602 that caused invalid scheduling of volatile asms:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82602
was fixed for gcc-8.1.0, the current minimum version of the
compiler required to compile the kernel.
Remove workaround that prevented invalid scheduling for
compilers, affected by PR82602.
There were no differences between old and new kernel object file
when compiled for x86_64 defconfig with gcc-8.1.0.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20250407112316.378347-1-ubizjak@gmail.com
There are 4 wariants of initmem_init(), for 32 and 64 bits and for
CONFIG_NUMA enabled and disabled.
After commit bbeb69ce30 ("x86/mm: Remove CONFIG_HIGHMEM64G support")
NUMA is not supported on 32 bit kernels anymore, and
arch/x86/mm/numa_32.c can be just deleted and setup_bootmem_allocator()
with completely misleading name can be folded into initmem_init().
For 64 bits the NUMA variant calls x86_numa_init() and !NUMA variant
sets all memory to node 0. The later can be split out into inline helper
called x86_numa_init() and then both initmem_init() functions become the
same.
Split out memblock_set_node() from initmem_init() for !NUMA on 64 bit
into x86_numa_init() helper and remove arch/x86/mm/numa_*.c that only
contained initmem_init() variants for NUMA configs.
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Len Brown <len.brown@intel.com>
Link: https://lore.kernel.org/r/20250409122815.420041-1-rppt@kernel.org
This works around what seems to be an optimization bug in GCC (at least
13.3.0), where it predicts access_ok() to fail despite the hint to the
contrary.
_copy_to_user() contains:
if (access_ok(to, n)) {
instrument_copy_to_user(to, from, n);
n = raw_copy_to_user(to, from, n);
}
Where access_ok() is likely(__access_ok(addr, size)), yet the compiler
emits conditional jumps forward for the case where it succeeds:
<+0>: endbr64
<+4>: mov %rdx,%rcx
<+7>: mov %rdx,%rax
<+10>: xor %edx,%edx
<+12>: add %rdi,%rcx
<+15>: setb %dl
<+18>: movabs $0x123456789abcdef,%r8
<+28>: test %rdx,%rdx
<+31>: jne 0xffffffff81b3b7c6 <_copy_to_user+38>
<+33>: cmp %rcx,%r8
<+36>: jae 0xffffffff81b3b7cb <_copy_to_user+43>
<+38>: jmp 0xffffffff822673e0 <__x86_return_thunk>
<+43>: nop
<+44>: nop
<+45>: nop
<+46>: mov %rax,%rcx
<+49>: rep movsb %ds:(%rsi),%es:(%rdi)
<+51>: nop
<+52>: nop
<+53>: nop
<+54>: mov %rcx,%rax
<+57>: nop
<+58>: nop
<+59>: nop
<+60>: jmp 0xffffffff822673e0 <__x86_return_thunk>
Patching _copy_to_user() to likely() around the access_ok() use does
not change the asm.
However, spelling out the prediction *within* valid_user_address() does the
trick:
<+0>: endbr64
<+4>: xor %eax,%eax
<+6>: mov %rdx,%rcx
<+9>: add %rdi,%rdx
<+12>: setb %al
<+15>: movabs $0x123456789abcdef,%r8
<+25>: test %rax,%rax
<+28>: jne 0xffffffff81b315e6 <_copy_to_user+54>
<+30>: cmp %rdx,%r8
<+33>: jb 0xffffffff81b315e6 <_copy_to_user+54>
<+35>: nop
<+36>: nop
<+37>: nop
<+38>: rep movsb %ds:(%rsi),%es:(%rdi)
<+40>: nop
<+41>: nop
<+42>: nop
<+43>: nop
<+44>: nop
<+45>: nop
<+46>: mov %rcx,%rax
<+49>: jmp 0xffffffff82255ba0 <__x86_return_thunk>
<+54>: mov %rcx,%rax
<+57>: jmp 0xffffffff82255ba0 <__x86_return_thunk>
Since we kinda expect valid_user_address() to be likely anyway,
add the likely() annotation that also happens to work around
this compiler bug.
[ mingo: Moved the unlikely() branch into valid_user_address() & updated the changelog ]
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250401203029.1132135-1-mjguzik@gmail.com
Todd reported, and Len confirmed, that commit 582077c940 ("x86/cfi:
Clean up linkage") broke S4 hiberate on a fair number of machines.
Turns out these machines trip #CP when trying to restore the image.
As it happens, the commit in question removes two ENDBR instructions
in the hibernate code, and clearly got it wrong.
Notably restore_image() does an indirect jump to
relocated_restore_code(), which is a relocated copy of
core_restore_code().
In turn, core_restore_code(), will at the end do an indirect jump to
restore_jump_address (r8), which is pointing at a relocated
restore_registers().
So both sites do indeed need to be ENDBR.
Fixes: 582077c940 ("x86/cfi: Clean up linkage")
Reported-by: Todd Brandt <todd.e.brandt@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Todd Brandt <todd.e.brandt@intel.com>
Tested-by: Len Brown <len.brown@intel.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219998
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219998
Complete the AMD CPUID(4) emulation logic, which uses CPUID(0x80000006)
for L2/L3 cache info and an assocs[] associativity mapping array, by
adding entries for 3-way caches and 6-way caches.
Properly handle the case where CPUID(0x80000006) returns an L2/L3
associativity of 9. This is not real associativity, but a marker to
indicate that the respective L2/L3 cache information should be retrieved
from CPUID(0x8000001d) instead. If such a marker is encountered, return
early from legacy_amd_cpuid4(), thus effectively emulating an "invalid
index" CPUID(4) response with a cache type of zero.
When checking if CPUID(0x80000006) L2/L3 cache info output is valid, and
given the associtivity marker 9 above, do not just check if the whole
ECX/EDX register is zero. Rather, check if the associativity is zero or
9. An associativity of zero implies no L2/L3 cache, which make it the
more correct check anyway vs. a zero check of the whole output register.
Fixes: a326e948c5 ("x86, cacheinfo: Fixup L3 cache information for AMD multi-node processors")
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: x86-cpuid@lists.linux.dev
Link: https://lore.kernel.org/r/20250409122233.1058601-3-darwi@linutronix.de
For the AMD CPUID(4) emulation cache info logic, the same associativity
mapping array, assocs[], is used for both CPUID(0x80000005) and
CPUID(0x80000006).
This is incorrect since per the AMD manuals, the mappings for
CPUID(0x80000005) L1d/L1i associativity is:
n = 0x1 -> 0xfe n
n = 0xff fully associative
while assocs[] maps these values to:
n = 0x1, 0x2, 0x4 n
n = 0x3, 0x7, 0x9 0
n = 0x6 8
n = 0x8 16
n = 0xa 32
n = 0xb 48
n = 0xc 64
n = 0xd 96
n = 0xe 128
n = 0xf fully associative
which is only valid for CPUID(0x80000006).
Parse CPUID(0x80000005) L1d/L1i associativity values as shown in the AMD
manuals. Since the 0xffff literal is used to denote full associativity
at the AMD CPUID(4)-emulation logic, define AMD_CPUID4_FULLY_ASSOCIATIVE
for it instead of spreading that literal in more places.
Mark the assocs[] mapping array as only valid for CPUID(0x80000006) L2/L3
cache information.
Fixes: a326e948c5 ("x86, cacheinfo: Fixup L3 cache information for AMD multi-node processors")
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: x86-cpuid@lists.linux.dev
Link: https://lore.kernel.org/r/20250409122233.1058601-2-darwi@linutronix.de
The NULL array terminator at the end of erratum_1386_microcode was
removed during the switch from x86_cpu_desc to x86_cpu_id. This
causes readers to run off the end of the array.
Replace the NULL.
Fixes: f3f3251526 ("x86/cpu: Move AMD erratum 1386 table over to 'x86_cpu_id'")
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
The chacha_use_simd static branch is required for x86 machines that
lack SSSE3 support. Restore it and the generic fallback code.
Reported-by: Eric Biggers <ebiggers@kernel.org>
Fixes: 9b4400215e ("crypto: x86/chacha - Remove SIMD fallback path")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This change alters the PowerPC and x86 driver implementations to record
the last sample period before the event is updated for the next period.
A common pattern in PMU driver implementations is to have a
"*_event_set_period" function which takes care of updating the various
period-related fields in a perf_event structure. In most cases, the
drivers choose to call this function after initializing a sample data
structure with perf_sample_data_init. The x86 and PowerPC drivers
deviate from this, choosing to update the period before initializing the
sample data. When using an event with an alternate sample period, this
causes an incorrect period to be written to the sample data that gets
reported to userspace.
Signed-off-by: Mark Barnett <mark.barnett@arm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250408171530.140858-2-mark.barnett@arm.com
User->user Spectre v2 attacks (including RSB) across context switches
are already mitigated by IBPB in cond_mitigation(), if enabled globally
or if either the prev or the next task has opted in to protection. RSB
filling without IBPB serves no purpose for protecting user space, as
indirect branches are still vulnerable.
User->kernel RSB attacks are mitigated by eIBRS. In which case the RSB
filling on context switch isn't needed, so remove it.
Suggested-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Reviewed-by: Amit Shah <amit.shah@amd.com>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Link: https://lore.kernel.org/r/98cdefe42180358efebf78e3b80752850c7a3e1b.1744148254.git.jpoimboe@kernel.org
eIBRS protects against guest->host RSB underflow/poisoning attacks.
Adding retpoline to the mix doesn't change that. Retpoline has a
balanced CALL/RET anyway.
So the current full RSB filling on VMEXIT with eIBRS+retpoline is
overkill. Disable it or do the VMEXIT_LITE mitigation if needed.
Suggested-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Reviewed-by: Amit Shah <amit.shah@amd.com>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Link: https://lore.kernel.org/r/84a1226e5c9e2698eae1b5ade861f1b8bf3677dc.1744148254.git.jpoimboe@kernel.org
IBPB is expected to clear the RSB. However, if X86_BUG_IBPB_NO_RET is
set, that doesn't happen. Make indirect_branch_prediction_barrier()
take that into account by calling write_ibpb() which clears RSB on
X86_BUG_IBPB_NO_RET:
/* Make sure IBPB clears return stack preductions too. */
FILL_RETURN_BUFFER %rax, RSB_CLEAR_LOOPS, X86_BUG_IBPB_NO_RET
Note that, as of the previous patch, write_ibpb() also reads
'x86_pred_cmd' in order to use SBPB when applicable:
movl _ASM_RIP(x86_pred_cmd), %eax
Therefore that existing behavior in indirect_branch_prediction_barrier()
is not lost.
Fixes: 50e4b3b940 ("x86/entry: Have entry_ibpb() invalidate return predictions")
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Link: https://lore.kernel.org/r/bba68888c511743d4cd65564d1fc41438907523f.1744148254.git.jpoimboe@kernel.org
write_ibpb() does IBPB, which (among other things) flushes branch type
predictions on AMD. If the CPU has SRSO_NO, or if the SRSO mitigation
has been disabled, branch type flushing isn't needed, in which case the
lighter-weight SBPB can be used.
The 'x86_pred_cmd' variable already keeps track of whether IBPB or SBPB
should be used. Use that instead of hardcoding IBPB.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/17c5dcd14b29199b75199d67ff7758de9d9a4928.1744148254.git.jpoimboe@kernel.org
First of all, using 'mmio' prevents proper implementation of 8-bit accessors.
Second, it's simply inconsistent with uart8250 set of options. Rename it to
'mmio32'. While at it, remove rather misleading comment in the documentation.
From now on mmio32 is self-explanatory and pciserial supports not only 32-bit
MMIO accessors.
Also, while at it, fix the comment for the "pciserial" case. The comment
seems to be a copy'n'paste error when mentioning "serial" instead of
"pciserial" (with double quotes). Fix this.
With that, move it upper, so we don't calculate 'buf' twice.
Fixes: 3181424aea ("x86/early_printk: Add support for MMIO-based UARTs")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Denis Mukhin <dmukhin@ford.com>
Link: https://lore.kernel.org/r/20250407172214.792745-1-andriy.shevchenko@linux.intel.com
Rename struct bts_buffer objects from 'buf' to 'bb' to improve the
readability when accessing the structure's 'buf' member. For example,
'buf->buf[]' becomes 'bb->buf[]'.
Indent line 327 using tabs to silence a checkpatch warning.
No functional changes intended.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250407085253.742834-2-thorsten.blum@linux.dev
The library code built under arch/x86/boot/startup is not intended to be
linked into vmlinux but only into the decompressor and/or the EFI stub.
This means objtool validation is not needed here, and may result in
false positive errors for things like missing retpolines.
So disable it for all objects added to lib-y
Tested-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20250408085254.836788-10-ardb+git@google.com
Since
741c10b096 ("kernfs: Use RCU to access kernfs_node::name.")
a helper rdt_kn_name() that checks that rdtgroup_mutex is held has been used
for all accesses to the kernfs node name.
rdtgroup_mkdir() uses the name to determine if a valid monitor group is being
created by checking the parent name is "mon_groups". This is done without
holding rdtgroup_mutex, and now triggers the following warning:
| WARNING: suspicious RCU usage
| 6.15.0-rc1 #4465 Tainted: G E
| -----------------------------
| arch/x86/kernel/cpu/resctrl/internal.h:408 suspicious rcu_dereference_check() usage!
[...]
| Call Trace:
| <TASK>
| dump_stack_lvl
| lockdep_rcu_suspicious.cold
| is_mon_groups
| rdtgroup_mkdir
| kernfs_iop_mkdir
| vfs_mkdir
| do_mkdirat
| __x64_sys_mkdir
| do_syscall_64
| entry_SYSCALL_64_after_hwframe
Creating a control or monitor group calls mkdir_rdt_prepare(), which uses
rdtgroup_kn_lock_live() to take the rdtgroup_mutex.
To avoid taking and dropping the lock, move the check for the monitor group
name and position into mkdir_rdt_prepare() so that it occurs under
rdtgroup_mutex. Hoist is_mon_groups() earlier in the file.
[ bp: Massage. ]
Fixes: 741c10b096 ("kernfs: Use RCU to access kernfs_node::name.")
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250407124637.2433230-1-james.morse@arm.com
* Rework heuristics for resolving the fault IPA (HPFAR_EL2 v. re-walk
stage-1 page tables) to align with the architecture. This avoids
possibly taking an SEA at EL2 on the page table walk or using an
architecturally UNKNOWN fault IPA.
* Use acquire/release semantics in the KVM FF-A proxy to avoid reading
a stale value for the FF-A version.
* Fix KVM guest driver to match PV CPUID hypercall ABI.
* Use Inner Shareable Normal Write-Back mappings at stage-1 in KVM
selftests, which is the only memory type for which atomic
instructions are architecturally guaranteed to work.
s390:
* Don't use %pK for debug printing and tracepoints.
x86:
* Use a separate subclass when acquiring KVM's per-CPU posted interrupts
wakeup lock in the scheduled out path, i.e. when adding a vCPU on
the list of vCPUs to wake, to workaround a false positive deadlock.
The schedule out code runs with a scheduler lock that the wakeup
handler takes in the opposite order; but it does so with IRQs disabled
and cannot run concurrently with a wakeup.
* Explicitly zero-initialize on-stack CPUID unions
* Allow building irqbypass.ko as as module when kvm.ko is a module
* Wrap relatively expensive sanity check with KVM_PROVE_MMU
* Acquire SRCU in KVM_GET_MP_STATE to protect guest memory accesses
selftests:
* Add more scenarios to the MONITOR/MWAIT test.
* Add option to rseq test to override /dev/cpu_dma_latency
* Bring list of exit reasons up to date
* Cleanup Makefile to list once tests that are valid on all architectures
Other:
* Documentation fixes
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmf083IUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroN1dgf/QwfpZcHoMNQSnrc1jMy2LHrArln2
XfmsOGZTU7kyoLQsLWGAPNocOveGdiemTDsj5ZXoNMnqV8hCBr+tZuv2gWI1rr/o
kiGerdIgSZ9piTjBlJkVAaOzbWhg2DUnr7qVVzEzFY9+rPNyQ81vgAfU7h56KhYB
optecozmBrHHAxvQZwmPeL9UyPWFjOF1BY/8LTMx7X+aVuCX6qx1JqO3a3ylAw4J
tGXv6qFJfuCnu1d1b4X0ILce0iMUTOjQzvTcIm+BKjYycecl+3j1aczC/BOorIgc
mf0+XeauhcTduK73pirnvx2b05eOxntgkOpwJytO2RP6pE0uK+2Th/C3Qg==
=ba/Y
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Rework heuristics for resolving the fault IPA (HPFAR_EL2 v. re-walk
stage-1 page tables) to align with the architecture. This avoids
possibly taking an SEA at EL2 on the page table walk or using an
architecturally UNKNOWN fault IPA
- Use acquire/release semantics in the KVM FF-A proxy to avoid
reading a stale value for the FF-A version
- Fix KVM guest driver to match PV CPUID hypercall ABI
- Use Inner Shareable Normal Write-Back mappings at stage-1 in KVM
selftests, which is the only memory type for which atomic
instructions are architecturally guaranteed to work
s390:
- Don't use %pK for debug printing and tracepoints
x86:
- Use a separate subclass when acquiring KVM's per-CPU posted
interrupts wakeup lock in the scheduled out path, i.e. when adding
a vCPU on the list of vCPUs to wake, to workaround a false positive
deadlock. The schedule out code runs with a scheduler lock that the
wakeup handler takes in the opposite order; but it does so with
IRQs disabled and cannot run concurrently with a wakeup
- Explicitly zero-initialize on-stack CPUID unions
- Allow building irqbypass.ko as as module when kvm.ko is a module
- Wrap relatively expensive sanity check with KVM_PROVE_MMU
- Acquire SRCU in KVM_GET_MP_STATE to protect guest memory accesses
selftests:
- Add more scenarios to the MONITOR/MWAIT test
- Add option to rseq test to override /dev/cpu_dma_latency
- Bring list of exit reasons up to date
- Cleanup Makefile to list once tests that are valid on all
architectures
Other:
- Documentation fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (26 commits)
KVM: arm64: Use acquire/release to communicate FF-A version negotiation
KVM: arm64: selftests: Explicitly set the page attrs to Inner-Shareable
KVM: arm64: selftests: Introduce and use hardware-definition macros
KVM: VMX: Use separate subclasses for PI wakeup lock to squash false positive
KVM: VMX: Assert that IRQs are disabled when putting vCPU on PI wakeup list
KVM: x86: Explicitly zero-initialize on-stack CPUID unions
KVM: Allow building irqbypass.ko as as module when kvm.ko is a module
KVM: x86/mmu: Wrap sanity check on number of TDP MMU pages with KVM_PROVE_MMU
KVM: selftests: Add option to rseq test to override /dev/cpu_dma_latency
KVM: x86: Acquire SRCU in KVM_GET_MP_STATE to protect guest memory accesses
Documentation: kvm: remove KVM_CAP_MIPS_TE
Documentation: kvm: organize capabilities in the right section
Documentation: kvm: fix some definition lists
Documentation: kvm: drop "Capability" heading from capabilities
Documentation: kvm: give correct name for KVM_CAP_SPAPR_MULTITCE
Documentation: KVM: KVM_GET_SUPPORTED_CPUID now exposes TSC_DEADLINE
selftests: kvm: list once tests that are valid on all architectures
selftests: kvm: bring list of exit reasons up to date
selftests: kvm: revamp MONITOR/MWAIT tests
KVM: arm64: Don't translate FAR if invalid/unsafe
...
ANNOTATE_IGNORE_ALTERNATIVE adds additional noise to the code generated
by CLAC/STAC alternatives, hurting readability for those whose read
uaccess-related code generation on a regular basis.
Remove the annotation specifically for the "NOP patched with CLAC/STAC"
case in favor of a manual check.
Leave the other uses of that annotation in place as they're less common
and more difficult to detect.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/fc972ba4995d826fcfb8d02733a14be8d670900b.1744098446.git.jpoimboe@kernel.org
The relative rates among two or more events are useful for performance
analysis, e.g., a high branch miss rate may indicate a performance
issue. Usually, the samples with a relative rate that exceeds some
threshold are more useful. However, the traditional sampling takes
samples of events separately. To get the relative rates among two or
more events, a high sample rate is required, which can bring high
overhead. Many samples taken in the non-hotspot area are also dropped
(useless) in the post-process.
The auto counter reload (ACR) feature takes samples when the relative
rate of two or more events exceeds some threshold, which provides the
fine-grained information at a low cost.
To support the feature, two sets of MSRs are introduced. For a given
counter IA32_PMC_GPn_CTR/IA32_PMC_FXm_CTR, bit fields in the
IA32_PMC_GPn_CFG_B/IA32_PMC_FXm_CFG_B MSR indicate which counter(s)
can cause a reload of that counter. The reload value is stored in the
IA32_PMC_GPn_CFG_C/IA32_PMC_FXm_CFG_C.
The details can be found at Intel SDM (085), Volume 3, 21.9.11 Auto
Counter Reload.
In the hw_config(), an ACR event is specially configured, because the
cause/reloadable counter mask has to be applied to the dyn_constraint.
Besides the HW limit, e.g., not support perf metrics, PDist and etc, a
SW limit is applied as well. ACR events in a group must be contiguous.
It facilitates the later conversion from the event idx to the counter
idx. Otherwise, the intel_pmu_acr_late_setup() has to traverse the whole
event list again to find the "cause" event.
Also, add a new flag PERF_X86_EVENT_ACR to indicate an ACR group, which
is set to the group leader.
The late setup() is also required for an ACR group. It's to convert the
event idx to the counter idx, and saved it in hw.config1.
The ACR configuration MSRs are only updated in the enable_event().
The disable_event() doesn't clear the ACR CFG register.
Add acr_cfg_b/acr_cfg_c in the struct cpu_hw_events to cache the MSR
values. It can avoid a MSR write if the value is not changed.
Expose an acr_mask to the sysfs. The perf tool can utilize the new
format to configure the relation of events in the group. The bit
sequence of the acr_mask follows the events enabled order of the group.
Example:
Here is the snippet of the mispredict.c. Since the array has a random
numbers, jumps are random and often mispredicted.
The mispredicted rate depends on the compared value.
For the Loop1, ~11% of all branches are mispredicted.
For the Loop2, ~21% of all branches are mispredicted.
main()
{
...
for (i = 0; i < N; i++)
data[i] = rand() % 256;
...
/* Loop 1 */
for (k = 0; k < 50; k++)
for (i = 0; i < N; i++)
if (data[i] >= 64)
sum += data[i];
...
...
/* Loop 2 */
for (k = 0; k < 50; k++)
for (i = 0; i < N; i++)
if (data[i] >= 128)
sum += data[i];
...
}
Usually, a code with a high branch miss rate means a bad performance.
To understand the branch miss rate of the codes, the traditional method
usually samples both branches and branch-misses events. E.g.,
perf record -e "{cpu_atom/branch-misses/ppu, cpu_atom/branch-instructions/u}"
-c 1000000 -- ./mispredict
[ perf record: Woken up 4 times to write data ]
[ perf record: Captured and wrote 0.925 MB perf.data (5106 samples) ]
The 5106 samples are from both events and spread in both Loops.
In the post-process stage, a user can know that the Loop 2 has a 21%
branch miss rate. Then they can focus on the samples of branch-misses
events for the Loop 2.
With this patch, the user can generate the samples only when the branch
miss rate > 20%. For example,
perf record -e "{cpu_atom/branch-misses,period=200000,acr_mask=0x2/ppu,
cpu_atom/branch-instructions,period=1000000,acr_mask=0x3/u}"
-- ./mispredict
(Two different periods are applied to branch-misses and
branch-instructions. The ratio is set to 20%.
If the branch-instructions is overflowed first, the branch-miss
rate < 20%. No samples should be generated. All counters should be
automatically reloaded.
If the branch-misses is overflowed first, the branch-miss rate > 20%.
A sample triggered by the branch-misses event should be
generated. Just the counter of the branch-instructions should be
automatically reloaded.
The branch-misses event should only be automatically reloaded when
the branch-instructions is overflowed. So the "cause" event is the
branch-instructions event. The acr_mask is set to 0x2, since the
event index in the group of branch-instructions is 1.
The branch-instructions event is automatically reloaded no matter which
events are overflowed. So the "cause" events are the branch-misses
and the branch-instructions event. The acr_mask should be set to 0x3.)
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.098 MB perf.data (2498 samples) ]
$perf report
Percent │154: movl $0x0,-0x14(%rbp)
│ ↓ jmp 1af
│ for (i = j; i < N; i++)
│15d: mov -0x10(%rbp),%eax
│ mov %eax,-0x18(%rbp)
│ ↓ jmp 1a2
│ if (data[i] >= 128)
│165: mov -0x18(%rbp),%eax
│ cltq
│ lea 0x0(,%rax,4),%rdx
│ mov -0x8(%rbp),%rax
│ add %rdx,%rax
│ mov (%rax),%eax
│ ┌──cmp $0x7f,%eax
100.00 0.00 │ ├──jle 19e
│ │sum += data[i];
The 2498 samples are all from the branch-misses events for the Loop 2.
The number of samples and overhead is significantly reduced without
losing any information.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Thomas Falcon <thomas.falcon@intel.com>
Link: https://lkml.kernel.org/r/20250327195217.2683619-6-kan.liang@linux.intel.com
The counters that support the auto counter reload feature can be
enumerated in the CPUID Leaf 0x23 sub-leaf 0x2.
Add acr_cntr_mask to store the mask of counters which are reloadable.
Add acr_cause_mask to store the mask of counters which can cause reload.
Since the e-core and p-core may have different numbers of counters,
track the masks in the struct x86_hybrid_pmu as well.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Thomas Falcon <thomas.falcon@intel.com>
Link: https://lkml.kernel.org/r/20250327195217.2683619-5-kan.liang@linux.intel.com
The auto counter reload feature requires an event flag to indicate an
auto counter reload group, which can only be scheduled on specific
counters that enumerated in CPUID. However, the hw_perf_event.flags has
run out on X86.
Two solutions were considered to address the issue.
- Currently, 20 bits are reserved for the architecture-specific flags.
Only the bit 31 is used for the generic flag. There is still plenty
of space left. Reserve 8 more bits for the arch-specific flags.
- Add a new X86 specific hw_perf_event.flags1 to support more flags.
The former is implemented. Enough room is still left in the global
generic flag.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Thomas Falcon <thomas.falcon@intel.com>
Link: https://lkml.kernel.org/r/20250327195217.2683619-4-kan.liang@linux.intel.com
When a machine supports PEBS v6, perf unconditionally searches the
cpuc->event_list[] for every event and check if the late setup is
required, which is unnecessary.
The late setup is only required for special events, e.g., events support
counters snapshotting feature. Add n_late_setup to track the num of
events that needs the late setup.
Other features, e.g., auto counter reload feature, require the late
setup as well. Add a wrapper, intel_pmu_pebs_late_setup, for the events
that support counters snapshotting feature.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Thomas Falcon <thomas.falcon@intel.com>
Link: https://lkml.kernel.org/r/20250327195217.2683619-3-kan.liang@linux.intel.com
More and more features require a dynamic event constraint, e.g., branch
counter logging, auto counter reload, Arch PEBS, etc.
Add a generic flag, PMU_FL_DYN_CONSTRAINT, to indicate the case. It
avoids keeping adding the individual flag in intel_cpuc_prepare().
Add a variable dyn_constraint in the struct hw_perf_event to track the
dynamic constraint of the event. Apply it if it's updated.
Apply the generic dynamic constraint for branch counter logging.
Many features on and after V6 require dynamic constraint. So
unconditionally set the flag for V6+.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Thomas Falcon <thomas.falcon@intel.com>
Link: https://lkml.kernel.org/r/20250327195217.2683619-2-kan.liang@linux.intel.com
When running as a PVH dom0 the ACPI tables exposed to Linux are (mostly)
the native ones, thus exposing the C and P states, that can lead to
attachment of CPU idle and frequency drivers. However the entity in
control of the CPU C and P states is Xen, as dom0 doesn't have a full view
of the system load, neither has all CPUs assigned and identity pinned.
Like it's done for classic PV guests, prevent Linux from using idle or
frequency state drivers when running as a PVH dom0.
On an AMD EPYC 7543P system without this fix a Linux PVH dom0 will keep the
host CPUs spinning at 100% even when dom0 is completely idle, as it's
attempting to use the acpi_idle driver.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jason Andryuk <jason.andryuk@amd.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20250407101842.67228-1-roger.pau@citrix.com>
Move platform initialization of SEV/SNP from CCP driver probe time to
KVM module load time so that KVM can do SEV/SNP platform initialization
explicitly if it actually wants to use SEV/SNP functionality.
Add support for KVM to explicitly call into the CCP driver at load time
to initialize SEV/SNP. If required, this behavior can be altered with KVM
module parameters to not do SEV/SNP platform initialization at module load
time. Additionally, a corresponding SEV/SNP platform shutdown is invoked
during KVM module unload time.
Continue to support SEV deferred initialization as the user may have the
file containing SEV persistent data for SEV INIT_EX available only later
after module load/init.
Suggested-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Objtool uses an arbitrary rule for INSN_SYSCALL and INSN_SYSRET that
almost works by accident: if it's in a function, control flow continues
after the instruction, otherwise it terminates.
That behavior should instead be based on the semantics of the underlying
instruction. Change INSN_SYSCALL to always preserve control flow and
INSN_SYSRET to always terminate it.
The changed semantic for INSN_SYSCALL requires a tweak to the
!CONFIG_IA32_EMULATION version of xen_entry_SYSCALL_compat(). In Xen,
SYSCALL is a hypercall which usually returns. But in this case it's a
hypercall to IRET which doesn't return. Add UD2 to tell objtool to
terminate control flow, and to prevent undefined behavior at runtime.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Juergen Gross <jgross@suse.com> # for the Xen part
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/19453dfe9a0431b7f016e9dc16d031cad3812a50.1744095216.git.jpoimboe@kernel.org
While debugging kexec/hibernation hangs and crashes, it turned out that
the current implementation of e820__register_nosave_regions() suffers from
multiple serious issues:
- The end of last region is tracked by PFN, causing it to find holes
that aren't there if two consecutive subpage regions are present
- The nosave PFN ranges derived from holes are rounded out (instead of
rounded in) which makes it inconsistent with how explicitly reserved
regions are handled
Fix this by:
- Treating reserved regions as if they were holes, to ensure consistent
handling (rounding out nosave PFN ranges is more correct as the
kernel does not use partial pages)
- Tracking the end of the last RAM region by address instead of pages
to detect holes more precisely
These bugs appear to have been introduced about ~18 years ago with the very
first version of e820_mark_nosave_regions(), and its flawed assumptions were
carried forward uninterrupted through various waves of rewrites and renames.
[ mingo: Added Git archeology details, for kicks and giggles. ]
Fixes: e8eff5ac29 ("[PATCH] Make swsusp avoid memory holes and reserved memory regions on x86_64")
Reported-by: Roberto Ricci <io@r-ricci.it>
Tested-by: Roberto Ricci <io@r-ricci.it>
Signed-off-by: Myrrh Periwinkle <myrrhperiwinkle@qtmlabs.xyz>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Len Brown <len.brown@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250406-fix-e820-nosave-v3-1-f3787bc1ee1d@qtmlabs.xyz
Closes: https://lore.kernel.org/all/Z4WFjBVHpndct7br@desktop0a/
Xen disables ACPI for PV guests in DomU, which causes acpi_mps_check() to
return 1 when CONFIG_X86_MPPARSE is not set. As a result, the local APIC is
disabled and the guest is later limited to a single vCPU, despite being
configured with more.
This regression was introduced in version 6.9 in commit 7c0edad364
("x86/cpu/topology: Rework possible CPU management"), which added an
early check that limits CPUs to 1 if apic_is_disabled.
Update the acpi_mps_check() logic to return 0 early when running as a Xen
PV guest in DomU, preventing APIC from being disabled in this specific case
and restoring correct multi-vCPU behaviour.
Fixes: 7c0edad364 ("x86/cpu/topology: Rework possible CPU management")
Signed-off-by: Petr Vaněk <arkamar@atlas.cz>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250407132445.6732-2-arkamar@atlas.cz
If microcode did not get loaded there is no reason to keep it in the cache.
Moreover, if loading failed it will not be possible to load an earlier version
of microcode since the failed revision will always be selected from the cache
on the next reload attempt.
Since the failed revisions is not easily available at this point just clean the
whole cache. It will be rebuilt later if needed.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20250327230503.1850368-3-boris.ostrovsky@oracle.com
This large commit contains the initial support for TDX in KVM. All x86
parts enable the host-side hypercalls that KVM uses to talk to the TDX
module, a software component that runs in a special CPU mode called SEAM
(Secure Arbitration Mode).
The series is in turn split into multiple sub-series, each with a separate
merge commit:
- Initialization: basic setup for using the TDX module from KVM, plus
ioctls to create TDX VMs and vCPUs.
- MMU: in TDX, private and shared halves of the address space are mapped by
different EPT roots, and the private half is managed by the TDX module.
Using the support that was added to the generic MMU code in 6.14,
add support for TDX's secure page tables to the Intel side of KVM.
Generic KVM code takes care of maintaining a mirror of the secure page
tables so that they can be queried efficiently, and ensuring that changes
are applied to both the mirror and the secure EPT.
- vCPU enter/exit: implement the callbacks that handle the entry of a TDX
vCPU (via the SEAMCALL TDH.VP.ENTER) and the corresponding save/restore
of host state.
- Userspace exits: introduce support for guest TDVMCALLs that KVM forwards to
userspace. These correspond to the usual KVM_EXIT_* "heavyweight vmexits"
but are triggered through a different mechanism, similar to VMGEXIT for
SEV-ES and SEV-SNP.
- Interrupt handling: support for virtual interrupt injection as well as
handling VM-Exits that are caused by vectored events. Exclusive to
TDX are machine-check SMIs, which the kernel already knows how to
handle through the kernel machine check handler (commit 7911f145de,
"x86/mce: Implement recovery for errors in TDX/SEAM non-root mode")
- Loose ends: handling of the remaining exits from the TDX module, including
EPT violation/misconfig and several TDVMCALL leaves that are handled in
the kernel (CPUID, HLT, RDMSR/WRMSR, GetTdVmCallInfo); plus returning
an error or ignoring operations that are not supported by TDX guests
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
PVH dom0 re-uses logic from PV dom0, in which RAM ranges not assigned to
dom0 are re-used as scratch memory to map foreign and grant pages. Such
logic relies on reporting those unpopulated ranges as RAM to Linux, and
mark them as reserved. This way Linux creates the underlying page
structures required for metadata management.
Such approach works fine on PV because the initial balloon target is
calculated using specific Xen data, that doesn't take into account the
memory type changes described above. However on HVM and PVH the initial
balloon target is calculated using get_num_physpages(), and that function
does take into account the unpopulated RAM regions used as scratch space
for remote domain mappings.
This leads to PVH dom0 having an incorrect initial balloon target, which
causes malfunction (excessive memory freeing) of the balloon driver if the
dom0 memory target is later adjusted from the toolstack.
Fix this by using xen_released_pages to account for any pages that are part
of the memory map, but are already unpopulated when the balloon driver is
initialized. This accounts for any regions used for scratch remote
mappings. Note on x86 xen_released_pages definition is moved to
enlighten.c so it's uniformly available for all Xen-enabled builds.
Take the opportunity to unify PV with PVH/HVM guests regarding the usage of
get_num_physpages(), as that avoids having to add different logic for PV vs
PVH in both balloon_add_regions() and arch_xen_unpopulated_init().
Much like a6aa4eb994, the code in this changeset should have been part of
38620fc4e8.
Fixes: a6aa4eb994 ('xen/x86: add extra pages to unpopulated-alloc if available')
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: stable@vger.kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20250407082838.65495-1-roger.pau@citrix.com>
Since crypto/chacha.c now registers chacha20-$(ARCH), xchacha20-$(ARCH),
and xchacha12-$(ARCH) skcipher algorithms that use the architecture's
ChaCha and HChaCha library functions, individual architectures no longer
need to do the same. Therefore, remove the redundant skcipher
algorithms and leave just the library functions.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Following the example of the crc32 and crc32c code, make the crypto
subsystem register both generic and architecture-optimized chacha20,
xchacha20, and xchacha12 skcipher algorithms, all implemented on top of
the appropriate library functions. This eliminates the need for every
architecture to implement the same skcipher glue code.
To register the architecture-optimized skciphers only when
architecture-optimized code is actually being used, add a function
chacha_is_arch_optimized() and make each arch implement it. Change each
architecture's ChaCha module_init function to arch_initcall so that the
CPU feature detection is guaranteed to run before
chacha_is_arch_optimized() gets called by crypto/chacha.c. In the case
of s390, remove the CPU feature based module autoloading, which is no
longer needed since the module just gets pulled in via function linkage.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Optimize the AVX-512 version of _compute_first_set_of_tweaks by using
vectorized shifts to compute the first vector of tweak blocks, and by
using byte-aligned shifts when multiplying by x^8.
AES-XTS performance on AMD Ryzen 9 9950X (Zen 5) improves by about 2%
for 4096-byte messages or 6% for 512-byte messages. AES-XTS performance
on Intel Sapphire Rapids improves by about 1% for 4096-byte messages or
3% for 512-byte messages. Code size decreases by 75 bytes which
outweighs the increase in rodata size of 16 bytes.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Current minimum required version of binutils is 2.25,
which supports AVX-512 instruction mnemonics.
Remove check for assembler support of AVX-512 instructions
and all relevant macros for conditional compilation.
No functional change intended.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Current minimum required version of binutils is 2.25,
which supports SHA-256 instruction mnemonics.
Remove check for assembler support of SHA-256 instructions
and all relevant macros for conditional compilation.
No functional change intended.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Current minimum required version of binutils is 2.25,
which supports SHA-1 instruction mnemonics.
Remove check for assembler support of SHA-1 instructions
and all relevant macros for conditional compilation.
No functional change intended.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Stop wrapping skcipher and aead algorithms with the crypto SIMD helper
(crypto/simd.c). The only purpose of doing so was to work around x86
not always supporting kernel-mode FPU in softirqs. Specifically, if a
hardirq interrupted a task context kernel-mode FPU section and then a
softirqs were run at the end of that hardirq, those softirqs could not
use kernel-mode FPU. This has now been fixed. In combination with the
fact that the skcipher and aead APIs only support task and softirq
contexts, these can now just use kernel-mode FPU unconditionally on x86.
This simplifies the code and improves performance.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Stop wrapping skcipher and aead algorithms with the crypto SIMD helper
(crypto/simd.c). The only purpose of doing so was to work around x86
not always supporting kernel-mode FPU in softirqs. Specifically, if a
hardirq interrupted a task context kernel-mode FPU section and then a
softirqs were run at the end of that hardirq, those softirqs could not
use kernel-mode FPU. This has now been fixed. In combination with the
fact that the skcipher and aead APIs only support task and softirq
contexts, these can now just use kernel-mode FPU unconditionally on x86.
This simplifies the code and improves performance.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Stop wrapping skcipher and aead algorithms with the crypto SIMD helper
(crypto/simd.c). The only purpose of doing so was to work around x86
not always supporting kernel-mode FPU in softirqs. Specifically, if a
hardirq interrupted a task context kernel-mode FPU section and then a
softirqs were run at the end of that hardirq, those softirqs could not
use kernel-mode FPU. This has now been fixed. In combination with the
fact that the skcipher and aead APIs only support task and softirq
contexts, these can now just use kernel-mode FPU unconditionally on x86.
This simplifies the code and improves performance.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Stop wrapping skcipher and aead algorithms with the crypto SIMD helper
(crypto/simd.c). The only purpose of doing so was to work around x86
not always supporting kernel-mode FPU in softirqs. Specifically, if a
hardirq interrupted a task context kernel-mode FPU section and then a
softirqs were run at the end of that hardirq, those softirqs could not
use kernel-mode FPU. This has now been fixed. In combination with the
fact that the skcipher and aead APIs only support task and softirq
contexts, these can now just use kernel-mode FPU unconditionally on x86.
This simplifies the code and improves performance.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Stop wrapping skcipher and aead algorithms with the crypto SIMD helper
(crypto/simd.c). The only purpose of doing so was to work around x86
not always supporting kernel-mode FPU in softirqs. Specifically, if a
hardirq interrupted a task context kernel-mode FPU section and then a
softirqs were run at the end of that hardirq, those softirqs could not
use kernel-mode FPU. This has now been fixed. In combination with the
fact that the skcipher and aead APIs only support task and softirq
contexts, these can now just use kernel-mode FPU unconditionally on x86.
This simplifies the code and improves performance.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Stop wrapping skcipher and aead algorithms with the crypto SIMD helper
(crypto/simd.c). The only purpose of doing so was to work around x86
not always supporting kernel-mode FPU in softirqs. Specifically, if a
hardirq interrupted a task context kernel-mode FPU section and then a
softirqs were run at the end of that hardirq, those softirqs could not
use kernel-mode FPU. This has now been fixed. In combination with the
fact that the skcipher and aead APIs only support task and softirq
contexts, these can now just use kernel-mode FPU unconditionally on x86.
This simplifies the code and improves performance.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Stop wrapping skcipher and aead algorithms with the crypto SIMD helper
(crypto/simd.c). The only purpose of doing so was to work around x86
not always supporting kernel-mode FPU in softirqs. Specifically, if a
hardirq interrupted a task context kernel-mode FPU section and then a
softirqs were run at the end of that hardirq, those softirqs could not
use kernel-mode FPU. This has now been fixed. In combination with the
fact that the skcipher and aead APIs only support task and softirq
contexts, these can now just use kernel-mode FPU unconditionally on x86.
This simplifies the code and improves performance.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Stop wrapping skcipher and aead algorithms with the crypto SIMD helper
(crypto/simd.c). The only purpose of doing so was to work around x86
not always supporting kernel-mode FPU in softirqs. Specifically, if a
hardirq interrupted a task context kernel-mode FPU section and then a
softirqs were run at the end of that hardirq, those softirqs could not
use kernel-mode FPU. This has now been fixed. In combination with the
fact that the skcipher and aead APIs only support task and softirq
contexts, these can now just use kernel-mode FPU unconditionally on x86.
This simplifies the code and improves performance.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Intel made a late change to the AVX10 specification that removes support
for a 256-bit maximum vector length and enumeration of the maximum
vector length. AVX10 will imply a maximum vector length of 512 bits.
I.e. there won't be any such thing as AVX10/256 or AVX10/512; there will
just be AVX10, and it will essentially just consolidate AVX512 features.
As a result of this new development, my strategy of providing both
*_avx10_256 and *_avx10_512 functions didn't turn out to be that useful.
The only remaining motivation for the 256-bit AVX512 / AVX10 functions
is to avoid downclocking on older Intel CPUs. But in the case of
AES-XTS and AES-CTR, I already wrote *_avx2 code too (primarily to
support CPUs without AVX512), which performs almost as well as
*_avx10_256. So we should just use that.
Therefore, remove the *_avx10_256 AES-XTS and AES-CTR functions and
algorithms, and rename the *_avx10_512 AES-XTS and AES-CTR functions and
algorithms to *_avx512. Make Ice Lake and Tiger Lake use *_avx2 instead
of *_avx10_256 which they previously used.
I've left AES-GCM unchanged for now. There is no VAES+AVX2 optimized
AES-GCM in the kernel yet, so the path forward for that is not as clear.
However, I did write a VAES+AVX2 optimized AES-GCM for BoringSSL. So
one option is to port that to the kernel and then do the same cleanup.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Linus expressed a strong preference for arch-specific asm code (i.e.,
virtually all of it) to reside under arch/ rather than anywhere else.
So move the EFI mixed mode startup code back, and put it under
arch/x86/boot/startup/ where all shared x86 startup code is going to
live.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20250401133416.1436741-11-ardb+git@google.com
The 5-level paging trampoline is used by both the EFI stub and the
traditional decompressor. Move it out of the decompressor sources into
the newly minted arch/x86/boot/startup/ sub-directory which will hold
startup code that may be shared between the decompressor, the EFI stub
and the kernel proper, and needs to tolerate being called during early
boot, before the kernel virtual mapping has been created.
This will allow the 5-level paging trampoline to be used by EFI boot
images such as zboot that omit the traditional decompressor entirely.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250401133416.1436741-10-ardb+git@google.com
Merge the local include "pgtable.h" -which declares the API of the
5-level paging trampoline- into <asm/boot.h> so that its implementation
in la57toggle.S as well as the calling code can be decoupled from the
traditional decompressor.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250401133416.1436741-9-ardb+git@google.com
LOAD_PHYSICAL_ADDR is calculated as an aligned (up) CONFIG_PHYSICAL_START
with the respective alignment value CONFIG_PHYSICAL_ALIGN. However,
the code is written openly while we have __ALIGN_KERNEL_MASK() macro
that does the same. This macro has nothing special, that's why
it may be used in assembler code or linker scripts (on the contrary
__ALIGN_KERNEL() may not). Do it so.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250404165303.3657139-1-andriy.shevchenko@linux.intel.com
