Advertise support for FLUSHBYASID when nested SVM is enabled, as KVM can
always emulate flushing TLB entries for a vmcb12 ASID, e.g. by running L2
with a new, fresh ASID in vmcb02. Some modern hypervisors, e.g. VMWare
Workstation 17, require FLUSHBYASID support and will refuse to run if it's
not present.
Punt on proper support, as "Honor L1's request to flush an ASID on nested
VMRUN" is one of the TODO items in the (incomplete) list of issues that
need to be addressed in order for KVM to NOT do a full TLB flush on every
nested SVM transition (see nested_svm_transition_tlb_flush()).
Reported-by: Stefan Sterz <s.sterz@proxmox.com>
Closes: https://lkml.kernel.org/r/b9915c9c-4cf6-051a-2d91-44cc6380f455%40proxmox.com
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20231018194104.1896415-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Revert KVM's made-up consistency check on SVM's TLB control. The APM says
that unsupported encodings are reserved, but the APM doesn't state that
VMRUN checks for a supported encoding. Unless something is called out
in "Canonicalization and Consistency Checks" or listed as MBZ (Must Be
Zero), AMD behavior is typically to let software shoot itself in the foot.
This reverts commit 174a921b69.
Fixes: 174a921b69 ("nSVM: Check for reserved encodings of TLB_CONTROL in nested VMCB")
Reported-by: Stefan Sterz <s.sterz@proxmox.com>
Closes: https://lkml.kernel.org/r/b9915c9c-4cf6-051a-2d91-44cc6380f455%40proxmox.com
Cc: stable@vger.kernel.org
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20231018194104.1896415-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add and use kvm_vcpu_is_legal_cr3() to check CR3's legality to provide
a clear distinction between CR3 and GPA checks. This will allow exempting
bits from kvm_vcpu_is_legal_cr3() without affecting general GPA checks,
e.g. for upcoming features that will use high bits in CR3 for feature
enabling.
No functional change intended.
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
Tested-by: Xuelian Guo <xuelian.guo@intel.com>
Link: https://lore.kernel.org/r/20230913124227.12574-7-binbin.wu@linux.intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
* Generalized infrastructure for 'writable' ID registers, effectively
allowing userspace to opt-out of certain vCPU features for its guest
* Optimization for vSGI injection, opportunistically compressing MPIDR
to vCPU mapping into a table
* Improvements to KVM's PMU emulation, allowing userspace to select
the number of PMCs available to a VM
* Guest support for memory operation instructions (FEAT_MOPS)
* Cleanups to handling feature flags in KVM_ARM_VCPU_INIT, squashing
bugs and getting rid of useless code
* Changes to the way the SMCCC filter is constructed, avoiding wasted
memory allocations when not in use
* Load the stage-2 MMU context at vcpu_load() for VHE systems, reducing
the overhead of errata mitigations
* Miscellaneous kernel and selftest fixes
LoongArch:
* New architecture. The hardware uses the same model as x86, s390
and RISC-V, where guest/host mode is orthogonal to supervisor/user
mode. The virtualization extensions are very similar to MIPS,
therefore the code also has some similarities but it's been cleaned
up to avoid some of the historical bogosities that are found in
arch/mips. The kernel emulates MMU, timer and CSR accesses, while
interrupt controllers are only emulated in userspace, at least for
now.
RISC-V:
* Support for the Smstateen and Zicond extensions
* Support for virtualizing senvcfg
* Support for virtualized SBI debug console (DBCN)
S390:
* Nested page table management can be monitored through tracepoints
and statistics
x86:
* Fix incorrect handling of VMX posted interrupt descriptor in KVM_SET_LAPIC,
which could result in a dropped timer IRQ
* Avoid WARN on systems with Intel IPI virtualization
* Add CONFIG_KVM_MAX_NR_VCPUS, to allow supporting up to 4096 vCPUs without
forcing more common use cases to eat the extra memory overhead.
* Add virtualization support for AMD SRSO mitigation (IBPB_BRTYPE and
SBPB, aka Selective Branch Predictor Barrier).
* Fix a bug where restoring a vCPU snapshot that was taken within 1 second of
creating the original vCPU would cause KVM to try to synchronize the vCPU's
TSC and thus clobber the correct TSC being set by userspace.
* Compute guest wall clock using a single TSC read to avoid generating an
inaccurate time, e.g. if the vCPU is preempted between multiple TSC reads.
* "Virtualize" HWCR.TscFreqSel to make Linux guests happy, which complain
about a "Firmware Bug" if the bit isn't set for select F/M/S combos.
Likewise "virtualize" (ignore) MSR_AMD64_TW_CFG to appease Windows Server
2022.
* Don't apply side effects to Hyper-V's synthetic timer on writes from
userspace to fix an issue where the auto-enable behavior can trigger
spurious interrupts, i.e. do auto-enabling only for guest writes.
* Remove an unnecessary kick of all vCPUs when synchronizing the dirty log
without PML enabled.
* Advertise "support" for non-serializing FS/GS base MSR writes as appropriate.
* Harden the fast page fault path to guard against encountering an invalid
root when walking SPTEs.
* Omit "struct kvm_vcpu_xen" entirely when CONFIG_KVM_XEN=n.
* Use the fast path directly from the timer callback when delivering Xen
timer events, instead of waiting for the next iteration of the run loop.
This was not done so far because previously proposed code had races,
but now care is taken to stop the hrtimer at critical points such as
restarting the timer or saving the timer information for userspace.
* Follow the lead of upstream Xen and ignore the VCPU_SSHOTTMR_future flag.
* Optimize injection of PMU interrupts that are simultaneous with NMIs.
* Usual handful of fixes for typos and other warts.
x86 - MTRR/PAT fixes and optimizations:
* Clean up code that deals with honoring guest MTRRs when the VM has
non-coherent DMA and host MTRRs are ignored, i.e. EPT is enabled.
* Zap EPT entries when non-coherent DMA assignment stops/start to prevent
using stale entries with the wrong memtype.
* Don't ignore guest PAT for CR0.CD=1 && KVM_X86_QUIRK_CD_NW_CLEARED=y.
This was done as a workaround for virtual machine BIOSes that did not
bother to clear CR0.CD (because ancient KVM/QEMU did not bother to
set it, in turn), and there's zero reason to extend the quirk to
also ignore guest PAT.
x86 - SEV fixes:
* Report KVM_EXIT_SHUTDOWN instead of EINVAL if KVM intercepts SHUTDOWN while
running an SEV-ES guest.
* Clean up the recognition of emulation failures on SEV guests, when KVM would
like to "skip" the instruction but it had already been partially emulated.
This makes it possible to drop a hack that second guessed the (insufficient)
information provided by the emulator, and just do the right thing.
Documentation:
* Various updates and fixes, mostly for x86
* MTRR and PAT fixes and optimizations:
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmVBZc0UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroP1LQf+NgsmZ1lkGQlKdSdijoQ856w+k0or
l2SV1wUwiEdFPSGK+RTUlHV5Y1ni1dn/CqCVIJZKEI3ZtZ1m9/4HKIRXvbMwFHIH
hx+E4Lnf8YUjsGjKTLd531UKcpphztZavQ6pXLEwazkSkDEra+JIKtooI8uU+9/p
bd/eF1V+13a8CHQf1iNztFJVxqBJbVlnPx4cZDRQQvewskIDGnVDtwbrwCUKGtzD
eNSzhY7si6O2kdQNkuA8xPhg29dYX9XLaCK2K1l8xOUm8WipLdtF86GAKJ5BVuOL
6ek/2QCYjZ7a+coAZNfgSEUi8JmFHEqCo7cnKmWzPJp+2zyXsdudqAhT1g==
=UIxm
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- Generalized infrastructure for 'writable' ID registers, effectively
allowing userspace to opt-out of certain vCPU features for its
guest
- Optimization for vSGI injection, opportunistically compressing
MPIDR to vCPU mapping into a table
- Improvements to KVM's PMU emulation, allowing userspace to select
the number of PMCs available to a VM
- Guest support for memory operation instructions (FEAT_MOPS)
- Cleanups to handling feature flags in KVM_ARM_VCPU_INIT, squashing
bugs and getting rid of useless code
- Changes to the way the SMCCC filter is constructed, avoiding wasted
memory allocations when not in use
- Load the stage-2 MMU context at vcpu_load() for VHE systems,
reducing the overhead of errata mitigations
- Miscellaneous kernel and selftest fixes
LoongArch:
- New architecture for kvm.
The hardware uses the same model as x86, s390 and RISC-V, where
guest/host mode is orthogonal to supervisor/user mode. The
virtualization extensions are very similar to MIPS, therefore the
code also has some similarities but it's been cleaned up to avoid
some of the historical bogosities that are found in arch/mips. The
kernel emulates MMU, timer and CSR accesses, while interrupt
controllers are only emulated in userspace, at least for now.
RISC-V:
- Support for the Smstateen and Zicond extensions
- Support for virtualizing senvcfg
- Support for virtualized SBI debug console (DBCN)
S390:
- Nested page table management can be monitored through tracepoints
and statistics
x86:
- Fix incorrect handling of VMX posted interrupt descriptor in
KVM_SET_LAPIC, which could result in a dropped timer IRQ
- Avoid WARN on systems with Intel IPI virtualization
- Add CONFIG_KVM_MAX_NR_VCPUS, to allow supporting up to 4096 vCPUs
without forcing more common use cases to eat the extra memory
overhead.
- Add virtualization support for AMD SRSO mitigation (IBPB_BRTYPE and
SBPB, aka Selective Branch Predictor Barrier).
- Fix a bug where restoring a vCPU snapshot that was taken within 1
second of creating the original vCPU would cause KVM to try to
synchronize the vCPU's TSC and thus clobber the correct TSC being
set by userspace.
- Compute guest wall clock using a single TSC read to avoid
generating an inaccurate time, e.g. if the vCPU is preempted
between multiple TSC reads.
- "Virtualize" HWCR.TscFreqSel to make Linux guests happy, which
complain about a "Firmware Bug" if the bit isn't set for select
F/M/S combos. Likewise "virtualize" (ignore) MSR_AMD64_TW_CFG to
appease Windows Server 2022.
- Don't apply side effects to Hyper-V's synthetic timer on writes
from userspace to fix an issue where the auto-enable behavior can
trigger spurious interrupts, i.e. do auto-enabling only for guest
writes.
- Remove an unnecessary kick of all vCPUs when synchronizing the
dirty log without PML enabled.
- Advertise "support" for non-serializing FS/GS base MSR writes as
appropriate.
- Harden the fast page fault path to guard against encountering an
invalid root when walking SPTEs.
- Omit "struct kvm_vcpu_xen" entirely when CONFIG_KVM_XEN=n.
- Use the fast path directly from the timer callback when delivering
Xen timer events, instead of waiting for the next iteration of the
run loop. This was not done so far because previously proposed code
had races, but now care is taken to stop the hrtimer at critical
points such as restarting the timer or saving the timer information
for userspace.
- Follow the lead of upstream Xen and ignore the VCPU_SSHOTTMR_future
flag.
- Optimize injection of PMU interrupts that are simultaneous with
NMIs.
- Usual handful of fixes for typos and other warts.
x86 - MTRR/PAT fixes and optimizations:
- Clean up code that deals with honoring guest MTRRs when the VM has
non-coherent DMA and host MTRRs are ignored, i.e. EPT is enabled.
- Zap EPT entries when non-coherent DMA assignment stops/start to
prevent using stale entries with the wrong memtype.
- Don't ignore guest PAT for CR0.CD=1 && KVM_X86_QUIRK_CD_NW_CLEARED=y
This was done as a workaround for virtual machine BIOSes that did
not bother to clear CR0.CD (because ancient KVM/QEMU did not bother
to set it, in turn), and there's zero reason to extend the quirk to
also ignore guest PAT.
x86 - SEV fixes:
- Report KVM_EXIT_SHUTDOWN instead of EINVAL if KVM intercepts
SHUTDOWN while running an SEV-ES guest.
- Clean up the recognition of emulation failures on SEV guests, when
KVM would like to "skip" the instruction but it had already been
partially emulated. This makes it possible to drop a hack that
second guessed the (insufficient) information provided by the
emulator, and just do the right thing.
Documentation:
- Various updates and fixes, mostly for x86
- MTRR and PAT fixes and optimizations"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (164 commits)
KVM: selftests: Avoid using forced target for generating arm64 headers
tools headers arm64: Fix references to top srcdir in Makefile
KVM: arm64: Add tracepoint for MMIO accesses where ISV==0
KVM: arm64: selftest: Perform ISB before reading PAR_EL1
KVM: arm64: selftest: Add the missing .guest_prepare()
KVM: arm64: Always invalidate TLB for stage-2 permission faults
KVM: x86: Service NMI requests after PMI requests in VM-Enter path
KVM: arm64: Handle AArch32 SPSR_{irq,abt,und,fiq} as RAZ/WI
KVM: arm64: Do not let a L1 hypervisor access the *32_EL2 sysregs
KVM: arm64: Refine _EL2 system register list that require trap reinjection
arm64: Add missing _EL2 encodings
arm64: Add missing _EL12 encodings
KVM: selftests: aarch64: vPMU test for validating user accesses
KVM: selftests: aarch64: vPMU register test for unimplemented counters
KVM: selftests: aarch64: vPMU register test for implemented counters
KVM: selftests: aarch64: Introduce vpmu_counter_access test
tools: Import arm_pmuv3.h
KVM: arm64: PMU: Allow userspace to limit PMCR_EL0.N for the guest
KVM: arm64: Sanitize PM{C,I}NTEN{SET,CLR}, PMOVS{SET,CLR} before first run
KVM: arm64: Add {get,set}_user for PM{C,I}NTEN{SET,CLR}, PMOVS{SET,CLR}
...
- Report KVM_EXIT_SHUTDOWN instead of EINVAL if KVM intercepts SHUTDOWN while
running an SEV-ES guest.
- Clean up handling "failures" when KVM detects it can't emulate the "skip"
action for an instruction that has already been partially emulated. Drop a
hack in the SVM code that was fudging around the emulator code not giving
SVM enough information to do the right thing.
-----BEGIN PGP SIGNATURE-----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=U0fq
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-svm-6.7' of https://github.com/kvm-x86/linux into HEAD
KVM SVM changes for 6.7:
- Report KVM_EXIT_SHUTDOWN instead of EINVAL if KVM intercepts SHUTDOWN while
running an SEV-ES guest.
- Clean up handling "failures" when KVM detects it can't emulate the "skip"
action for an instruction that has already been partially emulated. Drop a
hack in the SVM code that was fudging around the emulator code not giving
SVM enough information to do the right thing.
- Add CONFIG_KVM_MAX_NR_VCPUS to allow supporting up to 4096 vCPUs without
forcing more common use cases to eat the extra memory overhead.
- Add IBPB and SBPB virtualization support.
- Fix a bug where restoring a vCPU snapshot that was taken within 1 second of
creating the original vCPU would cause KVM to try to synchronize the vCPU's
TSC and thus clobber the correct TSC being set by userspace.
- Compute guest wall clock using a single TSC read to avoid generating an
inaccurate time, e.g. if the vCPU is preempted between multiple TSC reads.
- "Virtualize" HWCR.TscFreqSel to make Linux guests happy, which complain
about a "Firmware Bug" if the bit isn't set for select F/M/S combos.
- Don't apply side effects to Hyper-V's synthetic timer on writes from
userspace to fix an issue where the auto-enable behavior can trigger
spurious interrupts, i.e. do auto-enabling only for guest writes.
- Remove an unnecessary kick of all vCPUs when synchronizing the dirty log
without PML enabled.
- Advertise "support" for non-serializing FS/GS base MSR writes as appropriate.
- Use octal notation for file permissions through KVM x86.
- Fix a handful of typo fixes and warts.
-----BEGIN PGP SIGNATURE-----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=sfp8
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-misc-6.7' of https://github.com/kvm-x86/linux into HEAD
KVM x86 misc changes for 6.7:
- Add CONFIG_KVM_MAX_NR_VCPUS to allow supporting up to 4096 vCPUs without
forcing more common use cases to eat the extra memory overhead.
- Add IBPB and SBPB virtualization support.
- Fix a bug where restoring a vCPU snapshot that was taken within 1 second of
creating the original vCPU would cause KVM to try to synchronize the vCPU's
TSC and thus clobber the correct TSC being set by userspace.
- Compute guest wall clock using a single TSC read to avoid generating an
inaccurate time, e.g. if the vCPU is preempted between multiple TSC reads.
- "Virtualize" HWCR.TscFreqSel to make Linux guests happy, which complain
about a "Firmware Bug" if the bit isn't set for select F/M/S combos.
- Don't apply side effects to Hyper-V's synthetic timer on writes from
userspace to fix an issue where the auto-enable behavior can trigger
spurious interrupts, i.e. do auto-enabling only for guest writes.
- Remove an unnecessary kick of all vCPUs when synchronizing the dirty log
without PML enabled.
- Advertise "support" for non-serializing FS/GS base MSR writes as appropriate.
- Use octal notation for file permissions through KVM x86.
- Fix a handful of typo fixes and warts.
virtualization support is disabled in the BIOS on AMD and Hygon
platforms
- A minor cleanup
-----BEGIN PGP SIGNATURE-----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=i9On
-----END PGP SIGNATURE-----
Merge tag 'x86_cpu_for_6.7_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpuid updates from Borislav Petkov:
- Make sure the "svm" feature flag is cleared from /proc/cpuinfo when
virtualization support is disabled in the BIOS on AMD and Hygon
platforms
- A minor cleanup
* tag 'x86_cpu_for_6.7_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu/amd: Remove redundant 'break' statement
x86/cpu: Clear SVM feature if disabled by BIOS
Convert all module params to octal permissions to improve code readability
and to make checkpatch happy:
WARNING: Symbolic permissions 'S_IRUGO' are not preferred. Consider using
octal permissions '0444'.
Signed-off-by: Peng Hao <flyingpeng@tencent.com>
Link: https://lore.kernel.org/r/20231013113020.77523-1-flyingpeng@tencent.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
- Truncate writes to PMU counters to the counter's width to avoid spurious
overflows when emulating counter events in software.
- Set the LVTPC entry mask bit when handling a PMI (to match Intel-defined
architectural behavior).
- Treat KVM_REQ_PMI as a wake event instead of queueing host IRQ work to
kick the guest out of emulated halt.
-----BEGIN PGP SIGNATURE-----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=g8g3
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-pmu-6.6-fixes' of https://github.com/kvm-x86/linux into HEAD
KVM x86/pmu fixes for 6.6:
- Truncate writes to PMU counters to the counter's width to avoid spurious
overflows when emulating counter events in software.
- Set the LVTPC entry mask bit when handling a PMI (to match Intel-defined
architectural behavior).
- Treat KVM_REQ_PMI as a wake event instead of queueing host IRQ work to
kick the guest out of emulated halt.
Commit 916e3e5f26 ("KVM: SVM: Do not use user return MSR support for
virtualized TSC_AUX") introduced a local variable used for the rdmsr()
function for the high 32-bits of the MSR value. This variable is not used
after being set and triggers a warning or error, when treating warnings
as errors, when the unused-but-set-variable flag is set. Mark this
variable as __maybe_unused to fix this.
Fixes: 916e3e5f26 ("KVM: SVM: Do not use user return MSR support for virtualized TSC_AUX")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <0da9874b6e9fcbaaa5edeb345d7e2a7c859fc818.1696271334.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
svm_leave_nested() similar to a nested VM exit, get the vCPU out of nested
mode and thus should end the local inhibition of AVIC on this vCPU.
Failure to do so, can lead to hangs on guest reboot.
Raise the KVM_REQ_APICV_UPDATE request to refresh the AVIC state of the
current vCPU in this case.
Fixes: f44509f849 ("KVM: x86: SVM: allow AVIC to co-exist with a nested guest running")
Cc: stable@vger.kernel.org
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230928173354.217464-4-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In later revisions of AMD's APM, there is a new 'incomplete IPI' exit code:
"Invalid IPI Vector - The vector for the specified IPI was set to an
illegal value (VEC < 16)"
Note that tests on Zen2 machine show that this VM exit doesn't happen and
instead AVIC just does nothing.
Add support for this exit code by doing nothing, instead of filling
the kernel log with errors.
Also replace an unthrottled 'pr_err()' if another unknown incomplete
IPI exit happens with vcpu_unimpl()
(e.g in case AMD adds yet another 'Invalid IPI' exit reason)
Cc: <stable@vger.kernel.org>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230928173354.217464-3-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The following problem exists since x2avic was enabled in the KVM:
svm_set_x2apic_msr_interception is called to enable the interception of
the x2apic msrs.
In particular it is called at the moment the guest resets its apic.
Assuming that the guest's apic was in x2apic mode, the reset will bring
it back to the xapic mode.
The svm_set_x2apic_msr_interception however has an erroneous check for
'!apic_x2apic_mode()' which prevents it from doing anything in this case.
As a result of this, all x2apic msrs are left unintercepted, and that
exposes the bare metal x2apic (if enabled) to the guest.
Oops.
Remove the erroneous '!apic_x2apic_mode()' check to fix that.
This fixes CVE-2023-5090
Fixes: 4d1d7942e3 ("KVM: SVM: Introduce logic to (de)activate x2AVIC mode")
Cc: stable@vger.kernel.org
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Tested-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230928173354.217464-2-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Treat EMULTYPE_SKIP failures on SEV guests as unhandleable emulation
instead of simply resuming the guest, and drop the hack-a-fix which
effects that behavior for the INT3/INTO injection path. If KVM can't
skip an instruction for which KVM has already done partial emulation,
resuming the guest is undesirable as doing so may corrupt guest state.
Link: https://lore.kernel.org/r/20230825013621.2845700-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Refactor and rename can_emulate_instruction() to allow vendor code to
return more than true/false, e.g. to explicitly differentiate between
"retry", "fault", and "unhandleable". For now, just do the plumbing, a
future patch will expand SVM's implementation to signal outright failure
if KVM attempts EMULTYPE_SKIP on an SEV guest.
No functional change intended (or rather, none that are visible to the
guest or userspace).
Link: https://lore.kernel.org/r/20230825013621.2845700-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Currently if an SEV-ES VM shuts down userspace sees KVM_RUN struct with
only errno=EINVAL. This is a very limited amount of information to debug
the situation. Instead return KVM_EXIT_SHUTDOWN to alert userspace the VM
is shutting down and is not usable any further.
Signed-off-by: Peter Gonda <pgonda@google.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Suggested-by: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: x86@kernel.org
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20230907162449.1739785-1-pgonda@google.com
[sean: tweak changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Performance counters are defined to have width less than 64 bits. The
vPMU code maintains the counters in u64 variables but assumes the value
to fit within the defined width. However, for Intel non-full-width
counters (MSR_IA32_PERFCTRx) the value receieved from the guest is
truncated to 32 bits and then sign-extended to full 64 bits. If a
negative value is set, it's sign-extended to 64 bits, but then in
kvm_pmu_incr_counter() it's incremented, truncated, and compared to the
previous value for overflow detection.
That previous value is not truncated, so it always evaluates bigger than
the truncated new one, and a PMI is injected. If the PMI handler writes
a negative counter value itself, the vCPU never quits the PMI loop.
Turns out that Linux PMI handler actually does write the counter with
the value just read with RDPMC, so when no full-width support is exposed
via MSR_IA32_PERF_CAPABILITIES, and the guest initializes the counter to
a negative value, it locks up.
This has been observed in the field, for example, when the guest configures
atop to use perfevents and runs two instances of it simultaneously.
To address the problem, maintain the invariant that the counter value
always fits in the defined bit width, by truncating the received value
in the respective set_msr methods. For better readability, factor the
out into a helper function, pmc_write_counter(), shared by vmx and svm
parts.
Fixes: 9cd803d496 ("KVM: x86: Update vPMCs when retiring instructions")
Cc: stable@vger.kernel.org
Signed-off-by: Roman Kagan <rkagan@amazon.de>
Link: https://lore.kernel.org/all/20230504120042.785651-1-rkagan@amazon.de
Tested-by: Like Xu <likexu@tencent.com>
[sean: tweak changelog, s/set/write in the helper]
Signed-off-by: Sean Christopherson <seanjc@google.com>
When the TSC_AUX MSR is virtualized, the TSC_AUX value is swap type "B"
within the VMSA. This means that the guest value is loaded on VMRUN and
the host value is restored from the host save area on #VMEXIT.
Since the value is restored on #VMEXIT, the KVM user return MSR support
for TSC_AUX can be replaced by populating the host save area with the
current host value of TSC_AUX. And, since TSC_AUX is not changed by Linux
post-boot, the host save area can be set once in svm_hardware_enable().
This eliminates the two WRMSR instructions associated with the user return
MSR support.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <d381de38eb0ab6c9c93dda8503b72b72546053d7.1694811272.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The checks for virtualizing TSC_AUX occur during the vCPU reset processing
path. However, at the time of initial vCPU reset processing, when the vCPU
is first created, not all of the guest CPUID information has been set. In
this case the RDTSCP and RDPID feature support for the guest is not in
place and so TSC_AUX virtualization is not established.
This continues for each vCPU created for the guest. On the first boot of
an AP, vCPU reset processing is executed as a result of an APIC INIT
event, this time with all of the guest CPUID information set, resulting
in TSC_AUX virtualization being enabled, but only for the APs. The BSP
always sees a TSC_AUX value of 0 which probably went unnoticed because,
at least for Linux, the BSP TSC_AUX value is 0.
Move the TSC_AUX virtualization enablement out of the init_vmcb() path and
into the vcpu_after_set_cpuid() path to allow for proper initialization of
the support after the guest CPUID information has been set.
With the TSC_AUX virtualization support now in the vcpu_set_after_cpuid()
path, the intercepts must be either cleared or set based on the guest
CPUID input.
Fixes: 296d5a17e7 ("KVM: SEV-ES: Use V_TSC_AUX if available instead of RDTSC/MSR_TSC_AUX intercepts")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <4137fbcb9008951ab5f0befa74a0399d2cce809a.1694811272.git.thomas.lendacky@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
svm_recalc_instruction_intercepts() is always called at least once
before the vCPU is started, so the setting or clearing of the RDTSCP
intercept can be dropped from the TSC_AUX virtualization support.
Extracted from a patch by Tom Lendacky.
Cc: stable@vger.kernel.org
Fixes: 296d5a17e7 ("KVM: SEV-ES: Use V_TSC_AUX if available instead of RDTSC/MSR_TSC_AUX intercepts")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When SVM is disabled by BIOS, one cannot use KVM but the
SVM feature is still shown in the output of /proc/cpuinfo.
On Intel machines, VMX is cleared by init_ia32_feat_ctl(),
so do the same on AMD and Hygon processors.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230921114940.957141-1-pbonzini@redhat.com
- Misc cleanups
- Retry APIC optimized recalculation if a vCPU is added/enabled
- Overhaul emergency reboot code to bring SVM up to par with VMX, tie the
"emergency disabling" behavior to KVM actually being loaded, and move all of
the logic within KVM
- Fix user triggerable WARNs in SVM where KVM incorrectly assumes the TSC
ratio MSR can diverge from the default iff TSC scaling is enabled, and clean
up related code
- Add a framework to allow "caching" feature flags so that KVM can check if
the guest can use a feature without needing to search guest CPUID
-----BEGIN PGP SIGNATURE-----
iQJGBAABCgAwFiEEMHr+pfEFOIzK+KY1YJEiAU0MEvkFAmTueMwSHHNlYW5qY0Bn
b29nbGUuY29tAAoJEGCRIgFNDBL5hp4P/i/UmIJEJupryUrD/ZXcSjqmupCtv4JS
Z2o1KIAPbM5GUX4iyF1cnZrI4Ac5zMtULN8Tp3ATOp3AqKy72AqB1Z82e+v6SKis
KfSXlDFCPFisrwv3Ys7JEu9vIS8oqITHmSBk8OAmElwujdQ5jYLZjwGbCXbM9qas
yCFGLqD4fjX8XqkZLmXggjT99MPSgiTPoKL592Wq4JR8mY4hyQqJzBepDjb94sT7
wrsAv1B+BchGDguk0+nOdmHM4emGrZU7fVqi3OFPofSlwAAdkqZObleb422KB058
5bcpNow+9VH5pzgq8XSAU7DLNgH9aXH0PcVU8ASU6P0D9fceKoOFuL47nnFbwz0t
vKafcXNWFs8xHE4iyzvAAsZK/X8GR0ngNByPnamATMsjt2tTmsa5BOyAPkIN+GpT
DzZCIk27SbdGC3lGYlSV+5ob/+sOr6m384DkvSZnU6JiiFLlZiTxURj1/9Zvfka8
2co2wnf8cJxnKFUThFfuxs9XpKgvhkOE8LauwCSo4MAQM95Pen+NAK960RBWj0xl
wof5kIGmKbwmMXyg2Sr+EKqe5KRPba22Yi3x24tURAXafKK/AW7T8dgEEXOll7dp
pKmTPAevwUk9wYIGultjhEBXKYgMOeD2BVoTa5je5h1Da28onrSJ7aLQUixHHs0J
gLdtzs8M9K9t
=yGM1
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-misc-6.6' of https://github.com/kvm-x86/linux into HEAD
KVM x86 changes for 6.6:
- Misc cleanups
- Retry APIC optimized recalculation if a vCPU is added/enabled
- Overhaul emergency reboot code to bring SVM up to par with VMX, tie the
"emergency disabling" behavior to KVM actually being loaded, and move all of
the logic within KVM
- Fix user triggerable WARNs in SVM where KVM incorrectly assumes the TSC
ratio MSR can diverge from the default iff TSC scaling is enabled, and clean
up related code
- Add a framework to allow "caching" feature flags so that KVM can check if
the guest can use a feature without needing to search guest CPUID
- Add support for SEV-ES DebugSwap, i.e. allow SEV-ES guests to use debug
registers and generate/handle #DBs
- Clean up LBR virtualization code
- Fix a bug where KVM fails to set the target pCPU during an IRTE update
- Fix fatal bugs in SEV-ES intrahost migration
- Fix a bug where the recent (architecturally correct) change to reinject
#BP and skip INT3 broke SEV guests (can't decode INT3 to skip it)
-----BEGIN PGP SIGNATURE-----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=WC5V
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-svm-6.6' of https://github.com/kvm-x86/linux into HEAD
KVM: x86: SVM changes for 6.6:
- Add support for SEV-ES DebugSwap, i.e. allow SEV-ES guests to use debug
registers and generate/handle #DBs
- Clean up LBR virtualization code
- Fix a bug where KVM fails to set the target pCPU during an IRTE update
- Fix fatal bugs in SEV-ES intrahost migration
- Fix a bug where the recent (architecturally correct) change to reinject
#BP and skip INT3 broke SEV guests (can't decode INT3 to skip it)
Disallow SEV (and beyond) if nrips is disabled via module param, as KVM
can't read guest memory to partially emulate and skip an instruction. All
CPUs that support SEV support NRIPS, i.e. this is purely stopping the user
from shooting themselves in the foot.
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20230825013621.2845700-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Don't inject a #UD if KVM attempts to "emulate" to skip an instruction
for an SEV guest, and instead resume the guest and hope that it can make
forward progress. When commit 04c40f344d ("KVM: SVM: Inject #UD on
attempted emulation for SEV guest w/o insn buffer") added the completely
arbitrary #UD behavior, there were no known scenarios where a well-behaved
guest would induce a VM-Exit that triggered emulation, i.e. it was thought
that injecting #UD would be helpful.
However, now that KVM (correctly) attempts to re-inject INT3/INTO, e.g. if
a #NPF is encountered when attempting to deliver the INT3/INTO, an SEV
guest can trigger emulation without a buffer, through no fault of its own.
Resuming the guest and retrying the INT3/INTO is architecturally wrong,
e.g. the vCPU will incorrectly re-hit code #DBs, but for SEV guests there
is literally no other option that has a chance of making forward progress.
Drop the #UD injection for all "skip" emulation, not just those related to
INT3/INTO, even though that means that the guest will likely end up in an
infinite loop instead of getting a #UD (the vCPU may also crash, e.g. if
KVM emulated everything about an instruction except for advancing RIP).
There's no evidence that suggests that an unexpected #UD is actually
better than hanging the vCPU, e.g. a soft-hung vCPU can still respond to
IRQs and NMIs to generate a backtrace.
Reported-by: Wu Zongyo <wuzongyo@mail.ustc.edu.cn>
Closes: https://lore.kernel.org/all/8eb933fd-2cf3-d7a9-32fe-2a1d82eac42a@mail.ustc.edu.cn
Fixes: 6ef88d6e36 ("KVM: SVM: Re-inject INT3/INTO instead of retrying the instruction")
Cc: stable@vger.kernel.org
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20230825013621.2845700-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Skip initializing the VMSA physical address in the VMCB if the VMSA is
NULL, which occurs during intrahost migration as KVM initializes the VMCB
before copying over state from the source to the destination (including
the VMSA and its physical address).
In normal builds, __pa() is just math, so the bug isn't fatal, but with
CONFIG_DEBUG_VIRTUAL=y, the validity of the virtual address is verified
and passing in NULL will make the kernel unhappy.
Fixes: 6defa24d3b ("KVM: SEV: Init target VMCBs in sev_migrate_from")
Cc: stable@vger.kernel.org
Cc: Peter Gonda <pgonda@google.com>
Reviewed-by: Peter Gonda <pgonda@google.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Link: https://lore.kernel.org/r/20230825022357.2852133-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Track "virtual NMI exposed to L1" via a governed feature flag instead of
using a dedicated bit/flag in vcpu_svm.
Note, checking KVM's capabilities instead of the "vnmi" param means that
the code isn't strictly equivalent, as vnmi_enabled could have been set
if nested=false where as that the governed feature cannot. But that's a
glorified nop as the feature/flag is consumed only by paths that are
gated by nSVM being enabled.
Link: https://lore.kernel.org/r/20230815203653.519297-15-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Track "virtual GIF exposed to L1" via a governed feature flag instead of
using a dedicated bit/flag in vcpu_svm.
Note, checking KVM's capabilities instead of the "vgif" param means that
the code isn't strictly equivalent, as vgif_enabled could have been set
if nested=false where as that the governed feature cannot. But that's a
glorified nop as the feature/flag is consumed only by paths that are
Link: https://lore.kernel.org/r/20230815203653.519297-14-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Track "Pause Filtering is exposed to L1" via governed feature flags
instead of using dedicated bits/flags in vcpu_svm.
No functional change intended.
Reviewed-by: Yuan Yao <yuan.yao@intel.com>
Link: https://lore.kernel.org/r/20230815203653.519297-13-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Track "LBR virtualization exposed to L1" via a governed feature flag
instead of using a dedicated bit/flag in vcpu_svm.
Note, checking KVM's capabilities instead of the "lbrv" param means that
the code isn't strictly equivalent, as lbrv_enabled could have been set
if nested=false where as that the governed feature cannot. But that's a
glorified nop as the feature/flag is consumed only by paths that are
gated by nSVM being enabled.
Link: https://lore.kernel.org/r/20230815203653.519297-12-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Track "virtual VMSAVE/VMLOAD exposed to L1" via a governed feature flag
instead of using a dedicated bit/flag in vcpu_svm.
Opportunistically add a comment explaining why KVM disallows virtual
VMLOAD/VMSAVE when the vCPU model is Intel.
No functional change intended.
Link: https://lore.kernel.org/r/20230815203653.519297-11-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Track "TSC scaling exposed to L1" via a governed feature flag instead of
using a dedicated bit/flag in vcpu_svm.
Note, this fixes a benign bug where KVM would mark TSC scaling as exposed
to L1 even if overall nested SVM supported is disabled, i.e. KVM would let
L1 write MSR_AMD64_TSC_RATIO even when KVM didn't advertise TSCRATEMSR
support to userspace.
Reviewed-by: Yuan Yao <yuan.yao@intel.com>
Link: https://lore.kernel.org/r/20230815203653.519297-10-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Track "NRIPS exposed to L1" via a governed feature flag instead of using
a dedicated bit/flag in vcpu_svm.
No functional change intended.
Reviewed-by: Yuan Yao <yuan.yao@intel.com>
Link: https://lore.kernel.org/r/20230815203653.519297-9-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use the governed feature framework to track if XSAVES is "enabled", i.e.
if XSAVES can be used by the guest. Add a comment in the SVM code to
explain the very unintuitive logic of deliberately NOT checking if XSAVES
is enumerated in the guest CPUID model.
No functional change intended.
Reviewed-by: Yuan Yao <yuan.yao@intel.com>
Link: https://lore.kernel.org/r/20230815203653.519297-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Update the target pCPU for IOMMU doorbells when updating IRTE routing if
KVM is actively running the associated vCPU. KVM currently only updates
the pCPU when loading the vCPU (via avic_vcpu_load()), and so doorbell
events will be delayed until the vCPU goes through a put+load cycle (which
might very well "never" happen for the lifetime of the VM).
To avoid inserting a stale pCPU, e.g. due to racing between updating IRTE
routing and vCPU load/put, get the pCPU information from the vCPU's
Physical APIC ID table entry (a.k.a. avic_physical_id_cache in KVM) and
update the IRTE while holding ir_list_lock. Add comments with --verbose
enabled to explain exactly what is and isn't protected by ir_list_lock.
Fixes: 411b44ba80 ("svm: Implements update_pi_irte hook to setup posted interrupt")
Reported-by: dengqiao.joey <dengqiao.joey@bytedance.com>
Cc: stable@vger.kernel.org
Cc: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Tested-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Link: https://lore.kernel.org/r/20230808233132.2499764-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Hoist the acquisition of ir_list_lock from avic_update_iommu_vcpu_affinity()
to its two callers, avic_vcpu_load() and avic_vcpu_put(), specifically to
encapsulate the write to the vCPU's entry in the AVIC Physical ID table.
This will allow a future fix to pull information from the Physical ID entry
when updating the IRTE, without potentially consuming stale information,
i.e. without racing with the vCPU being (un)loaded.
Add a comment to call out that ir_list_lock does NOT protect against
multiple writers, specifically that reading the Physical ID entry in
avic_vcpu_put() outside of the lock is safe.
To preserve some semblance of independence from ir_list_lock, keep the
READ_ONCE() in avic_vcpu_load() even though acuiring the spinlock
effectively ensures the load(s) will be generated after acquiring the
lock.
Cc: stable@vger.kernel.org
Tested-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Link: https://lore.kernel.org/r/20230808233132.2499764-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Similar to how it doesn't make sense to have UNTRAIN_RET have two
untrain calls, it also doesn't make sense for VMEXIT to have an extra
IBPB call.
This cures VMEXIT doing potentially unret+IBPB or double IBPB.
Also, the (SEV) VMEXIT case seems to have been overlooked.
Redefine the meaning of the synthetic IBPB flags to:
- ENTRY_IBPB -- issue IBPB on entry (was: entry + VMEXIT)
- IBPB_ON_VMEXIT -- issue IBPB on VMEXIT
And have 'retbleed=ibpb' set *BOTH* feature flags to ensure it retains
the previous behaviour and issues IBPB on entry+VMEXIT.
The new 'srso=ibpb_vmexit' option only sets IBPB_ON_VMEXIT.
Create UNTRAIN_RET_VM specifically for the VMEXIT case, and have that
check IBPB_ON_VMEXIT.
All this avoids having the VMEXIT case having to check both ENTRY_IBPB
and IBPB_ON_VMEXIT and simplifies the alternatives.
Fixes: fb3bd914b3 ("x86/srso: Add a Speculative RAS Overflow mitigation")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230814121149.109557833@infradead.org
Initially, it was thought that doing an innocuous division in the #DE
handler would take care to prevent any leaking of old data from the
divider but by the time the fault is raised, the speculation has already
advanced too far and such data could already have been used by younger
operations.
Therefore, do the innocuous division on every exit to userspace so that
userspace doesn't see any potentially old data from integer divisions in
kernel space.
Do the same before VMRUN too, to protect host data from leaking into the
guest too.
Fixes: 77245f1c3c ("x86/CPU/AMD: Do not leak quotient data after a division by 0")
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/20230811213824.10025-1-bp@alien8.de
vulnerability on AMD processors. In short, this is yet another issue
where userspace poisons a microarchitectural structure which can then be
used to leak privileged information through a side channel.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmTQs1gACgkQEsHwGGHe
VUo1UA/8C34PwJveZDcerdkaxSF+WKx7AjOI/L2ws1qn9YVFA3ItFMgVuFTrlY6c
1eYKYB3FS9fVN3KzGOXGyhho6seHqfY0+8cyYupR+PVLn9rSy7GqHaIMr37FdQ2z
yb9xu26v+gsvuPEApazS6MxijYS98u71rHhmg97qsHCnUiMJ01+TaGucntukNJv8
FfwjZJvgeUiBPQ/6IeA/O0413tPPJ9weawPyW+sV1w7NlXjaUVkNXwiq/Xxbt9uI
sWwMBjFHpSnhBRaDK8W5Blee/ZfsS6qhJ4jyEKUlGtsElMnZLPHbnrbpxxqA9gyE
K+3ZhoHf/W1hhvcZcALNoUHLx0CvVekn0o41urAhPfUutLIiwLQWVbApmuW80fgC
DhPedEFu7Wp6Okj5+Bqi/XOsOOWN2WRDSzdAq10o1C+e+fzmkr6y4E6gskfz1zXU
ssD9S4+uAJ5bccS5lck4zLffsaA03nAYTlvl1KRP4pOz5G9ln6eyO20ar1WwfGAV
o5ZsTJVGQMyVA49QFkksj+kOI3chkmDswPYyGn2y8OfqYXU4Ip4eN+VkjorIAo10
zIec3Z0bCGZ9UUMylUmdtH3KAm8q0wVNoFrUkMEmO8j6nn7ew2BhwLMn4uu+nOnw
lX2AG6PNhRLVDVaNgDsWMwejaDsitQPoWRuCIAZ0kQhbeYuwfpM=
=73JY
-----END PGP SIGNATURE-----
Merge tag 'x86_bugs_srso' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86/srso fixes from Borislav Petkov:
"Add a mitigation for the speculative RAS (Return Address Stack)
overflow vulnerability on AMD processors.
In short, this is yet another issue where userspace poisons a
microarchitectural structure which can then be used to leak privileged
information through a side channel"
* tag 'x86_bugs_srso' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/srso: Tie SBPB bit setting to microcode patch detection
x86/srso: Add a forgotten NOENDBR annotation
x86/srso: Fix return thunks in generated code
x86/srso: Add IBPB on VMEXIT
x86/srso: Add IBPB
x86/srso: Add SRSO_NO support
x86/srso: Add IBPB_BRTYPE support
x86/srso: Add a Speculative RAS Overflow mitigation
x86/bugs: Increase the x86 bugs vector size to two u32s
To avoid possible time-of-check/time-of-use issues, the GHCB should
almost never be accessed outside dump_ghcb, sev_es_sync_to_ghcb
and sev_es_sync_from_ghcb. The only legitimate uses are to set the
exitinfo fields and to find the address of the scratch area embedded
in the ghcb. Accessing ghcb_usage also goes through svm->sev_es.ghcb
in sev_es_validate_vmgexit(), but that is because anyway the value is
not used.
Removing a shortcut variable that contains the value of svm->sev_es.ghcb
makes these cases a bit more verbose, but it limits the chance of someone
reading the ghcb by mistake.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A KVM guest using SEV-ES or SEV-SNP with multiple vCPUs can trigger
a double fetch race condition vulnerability and invoke the VMGEXIT
handler recursively.
sev_handle_vmgexit() maps the GHCB page using kvm_vcpu_map() and then
fetches the exit code using ghcb_get_sw_exit_code(). Soon after,
sev_es_validate_vmgexit() fetches the exit code again. Since the GHCB
page is shared with the guest, the guest is able to quickly swap the
values with another vCPU and hence bypass the validation. One vmexit code
that can be rejected by sev_es_validate_vmgexit() is SVM_EXIT_VMGEXIT;
if sev_handle_vmgexit() observes it in the second fetch, the call
to svm_invoke_exit_handler() will invoke sev_handle_vmgexit() again
recursively.
To avoid the race, always fetch the GHCB data from the places where
sev_es_sync_from_ghcb stores it.
Exploiting recursions on linux kernel has been proven feasible
in the past, but the impact is mitigated by stack guard pages
(CONFIG_VMAP_STACK). Still, if an attacker manages to call the handler
multiple times, they can theoretically trigger a stack overflow and
cause a denial-of-service, or potentially guest-to-host escape in kernel
configurations without stack guard pages.
Note that winning the race reliably in every iteration is very tricky
due to the very tight window of the fetches; depending on the compiler
settings, they are often consecutive because of optimization and inlining.
Tested by booting an SEV-ES RHEL9 guest.
Fixes: CVE-2023-4155
Fixes: 291bd20d5d ("KVM: SVM: Add initial support for a VMGEXIT VMEXIT")
Cc: stable@vger.kernel.org
Reported-by: Andy Nguyen <theflow@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Validation of the GHCB is susceptible to time-of-check/time-of-use vulnerabilities.
To avoid them, we would like to always snapshot the fields that are read in
sev_es_validate_vmgexit(), and not use the GHCB anymore after it returns.
This means:
- invoking sev_es_sync_from_ghcb() before any GHCB access, including before
sev_es_validate_vmgexit()
- snapshotting all fields including the valid bitmap and the sw_scratch field,
which are currently not caching anywhere.
The valid bitmap is the first thing to be copied out of the GHCB; then,
further accesses will use the copy in svm->sev_es.
Fixes: 291bd20d5d ("KVM: SVM: Add initial support for a VMGEXIT VMEXIT")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Skip writes to MSR_AMD64_TSC_RATIO that are done in the context of a vCPU
if guest state isn't loaded, i.e. if KVM will update MSR_AMD64_TSC_RATIO
during svm_prepare_switch_to_guest() before entering the guest. Checking
guest_state_loaded may or may not be a net positive for performance as
the current_tsc_ratio cache will optimize away duplicate WRMSRs in the
vast majority of scenarios. However, the cost of the check is negligible,
and the real motivation is to document that KVM needs to load the vCPU's
value only when running the vCPU.
Link: https://lore.kernel.org/r/20230729011608.1065019-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Drop the @offset and @multiplier params from the kvm_x86_ops hooks for
propagating TSC offsets/multipliers into hardware, and instead have the
vendor implementations pull the information directly from the vCPU
structure. The respective vCPU fields _must_ be written at the same
time in order to maintain consistent state, i.e. it's not random luck
that the value passed in by all callers is grabbed from the vCPU.
Explicitly grabbing the value from the vCPU field in SVM's implementation
in particular will allow for additional cleanup without introducing even
more subtle dependencies. Specifically, SVM can skip the WRMSR if guest
state isn't loaded, i.e. svm_prepare_switch_to_guest() will load the
correct value for the vCPU prior to entering the guest.
This also reconciles KVM's handling of related values that are stored in
the vCPU, as svm_write_tsc_offset() already assumes/requires the caller
to have updated l1_tsc_offset.
Link: https://lore.kernel.org/r/20230729011608.1065019-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Explicitly disable preemption when writing MSR_AMD64_TSC_RATIO only in the
"outer" helper, as all direct callers of the "inner" helper now run with
preemption already disabled. And that isn't a coincidence, as the outer
helper requires a vCPU and is intended to be used when modifying guest
state and/or emulating guest instructions, which are typically done with
preemption enabled.
Direct use of the inner helper should be extremely limited, as the only
time KVM should modify MSR_AMD64_TSC_RATIO without a vCPU is when
sanitizing the MSR for a specific pCPU (currently done when {en,dis}abling
disabling SVM). The other direct caller is svm_prepare_switch_to_guest(),
which does have a vCPU, but is a one-off special case: KVM is about to
enter the guest on a specific pCPU and thus must have preemption disabled.
Link: https://lore.kernel.org/r/20230729011608.1065019-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
When emulating nested SVM transitions, use the outer helper for writing
the TSC multiplier for L2. Using the inner helper only for one-off cases,
i.e. for paths where KVM is NOT emulating or modifying vCPU state, will
allow for multiple cleanups:
- Explicitly disabling preemption only in the outer helper
- Getting the multiplier from the vCPU field in the outer helper
- Skipping the WRMSR in the outer helper if guest state isn't loaded
Opportunistically delete an extra newline.
No functional change intended.
Link: https://lore.kernel.org/r/20230729011608.1065019-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
When emulating nested VM-Exit, load L1's TSC multiplier if L1's desired
ratio doesn't match the current ratio, not if the ratio L1 is using for
L2 diverges from the default. Functionally, the end result is the same
as KVM will run L2 with L1's multiplier if L2's multiplier is the default,
i.e. checking that L1's multiplier is loaded is equivalent to checking if
L2 has a non-default multiplier.
However, the assertion that TSC scaling is exposed to L1 is flawed, as
userspace can trigger the WARN at will by writing the MSR and then
updating guest CPUID to hide the feature (modifying guest CPUID is
allowed anytime before KVM_RUN). E.g. hacking KVM's state_test
selftest to do
vcpu_set_msr(vcpu, MSR_AMD64_TSC_RATIO, 0);
vcpu_clear_cpuid_feature(vcpu, X86_FEATURE_TSCRATEMSR);
after restoring state in a new VM+vCPU yields an endless supply of:
------------[ cut here ]------------
WARNING: CPU: 10 PID: 206939 at arch/x86/kvm/svm/nested.c:1105
nested_svm_vmexit+0x6af/0x720 [kvm_amd]
Call Trace:
nested_svm_exit_handled+0x102/0x1f0 [kvm_amd]
svm_handle_exit+0xb9/0x180 [kvm_amd]
kvm_arch_vcpu_ioctl_run+0x1eab/0x2570 [kvm]
kvm_vcpu_ioctl+0x4c9/0x5b0 [kvm]
? trace_hardirqs_off+0x4d/0xa0
__se_sys_ioctl+0x7a/0xc0
__x64_sys_ioctl+0x21/0x30
do_syscall_64+0x41/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Unlike the nested VMRUN path, hoisting the svm->tsc_scaling_enabled check
into the if-statement is wrong as KVM needs to ensure L1's multiplier is
loaded in the above scenario. Alternatively, the WARN_ON() could simply
be deleted, but that would make KVM's behavior even more subtle, e.g. it's
not immediately obvious why it's safe to write MSR_AMD64_TSC_RATIO when
checking only tsc_ratio_msr.
Fixes: 5228eb96a4 ("KVM: x86: nSVM: implement nested TSC scaling")
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230729011608.1065019-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Check for nested TSC scaling support on nested SVM VMRUN instead of
asserting that TSC scaling is exposed to L1 if L1's MSR_AMD64_TSC_RATIO
has diverged from KVM's default. Userspace can trigger the WARN at will
by writing the MSR and then updating guest CPUID to hide the feature
(modifying guest CPUID is allowed anytime before KVM_RUN). E.g. hacking
KVM's state_test selftest to do
vcpu_set_msr(vcpu, MSR_AMD64_TSC_RATIO, 0);
vcpu_clear_cpuid_feature(vcpu, X86_FEATURE_TSCRATEMSR);
after restoring state in a new VM+vCPU yields an endless supply of:
------------[ cut here ]------------
WARNING: CPU: 164 PID: 62565 at arch/x86/kvm/svm/nested.c:699
nested_vmcb02_prepare_control+0x3d6/0x3f0 [kvm_amd]
Call Trace:
<TASK>
enter_svm_guest_mode+0x114/0x560 [kvm_amd]
nested_svm_vmrun+0x260/0x330 [kvm_amd]
vmrun_interception+0x29/0x30 [kvm_amd]
svm_invoke_exit_handler+0x35/0x100 [kvm_amd]
svm_handle_exit+0xe7/0x180 [kvm_amd]
kvm_arch_vcpu_ioctl_run+0x1eab/0x2570 [kvm]
kvm_vcpu_ioctl+0x4c9/0x5b0 [kvm]
__se_sys_ioctl+0x7a/0xc0
__x64_sys_ioctl+0x21/0x30
do_syscall_64+0x41/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x45ca1b
Note, the nested #VMEXIT path has the same flaw, but needs a different
fix and will be handled separately.
Fixes: 5228eb96a4 ("KVM: x86: nSVM: implement nested TSC scaling")
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230729011608.1065019-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Now that kvm_rebooting is guaranteed to be true prior to disabling SVM
in an emergency, use the existing stgi() helper instead of open coding
STGI. In effect, eat faults on STGI if and only if kvm_rebooting==true.
Link: https://lore.kernel.org/r/20230721201859.2307736-19-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Set kvm_rebooting when virtualization is disabled in an emergency so that
KVM eats faults on virtualization instructions even if kvm_reboot() isn't
reached.
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20230721201859.2307736-18-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Move cpu_svm_disable() into KVM proper now that all hardware
virtualization management is routed through KVM. Remove the now-empty
virtext.h.
No functional change intended.
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20230721201859.2307736-17-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Check "this" CPU instead of the boot CPU when querying SVM support so that
the per-CPU checks done during hardware enabling actually function as
intended, i.e. will detect issues where SVM isn't support on all CPUs.
Disable migration for the use from svm_init() mostly so that the standard
accessors for the per-CPU data can be used without getting yelled at by
CONFIG_DEBUG_PREEMPT=y sanity checks. Preventing the "disabled by BIOS"
error message from reporting the wrong CPU is largely a bonus, as ensuring
a stable CPU during module load is a non-goal for KVM.
Link: https://lore.kernel.org/all/ZAdxNgv0M6P63odE@google.com
Cc: Kai Huang <kai.huang@intel.com>
Cc: Chao Gao <chao.gao@intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20230721201859.2307736-15-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Fold the guts of cpu_has_svm() into kvm_is_svm_supported(), its sole
remaining user.
No functional change intended.
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20230721201859.2307736-14-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use the virt callback to disable SVM (and set GIF=1) during an emergency
instead of blindly attempting to disable SVM. Like the VMX case, if a
hypervisor, i.e. KVM, isn't loaded/active, SVM can't be in use.
Acked-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20230721201859.2307736-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use the recently introduced svm_get_lbr_vmcb() instead an open coded
equivalent to retrieve the target VMCB when emulating writes to
MSR_IA32_DEBUGCTLMSR.
No functional change intended.
Link: https://lore.kernel.org/r/20230607203519.1570167-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Clean up the enable_lbrv computation in svm_update_lbrv() to consolidate
the logic for computing enable_lbrv into a single statement, and to remove
the coding style violations (lack of curly braces on nested if).
No functional change intended.
Link: https://lore.kernel.org/r/20230607203519.1570167-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Refactor KVM's handling of LBR MSRs on SVM to avoid a second layer of
case statements, and thus eliminate a dead KVM_BUG() call, which (a) will
never be hit in the current code base and (b) if a future commit breaks
things, will never fire as KVM passes "false" instead "true" or '1' for
the KVM_BUG() condition.
Reported-by: Michal Luczaj <mhal@rbox.co>
Cc: Yuan Yao <yuan.yao@intel.com>
Link: https://lore.kernel.org/r/20230607203519.1570167-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reject KVM_SET_SREGS{2} with -EINVAL if the incoming CR0 is invalid,
e.g. due to setting bits 63:32, illegal combinations, or to a value that
isn't allowed in VMX (non-)root mode. The VMX checks in particular are
"fun" as failure to disallow Real Mode for an L2 that is configured with
unrestricted guest disabled, when KVM itself has unrestricted guest
enabled, will result in KVM forcing VM86 mode to virtual Real Mode for
L2, but then fail to unwind the related metadata when synthesizing a
nested VM-Exit back to L1 (which has unrestricted guest enabled).
Opportunistically fix a benign typo in the prototype for is_valid_cr4().
Cc: stable@vger.kernel.org
Reported-by: syzbot+5feef0b9ee9c8e9e5689@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/000000000000f316b705fdf6e2b4@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230613203037.1968489-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that handle_fastpath_set_msr_irqoff() acquires kvm->srcu, i.e. allows
dereferencing memslots during WRMSR emulation, drop the requirement that
"next RIP" is valid. In hindsight, acquiring kvm->srcu would have been a
better fix than avoiding the pastpath, but at the time it was thought that
accessing SRCU-protected data in the fastpath was a one-off edge case.
This reverts commit 5c30e8101e.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230721224337.2335137-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Bail early from svm_enable_nmi_window() for SEV-ES guests without trying
to enable single-step of the guest, as single-stepping an SEV-ES guest is
impossible and the guest is responsible for *telling* KVM when it is ready
for an new NMI to be injected.
Functionally, setting TF and RF in svm->vmcb->save.rflags is benign as the
field is ignored by hardware, but it's all kinds of confusing.
Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Link: https://lore.kernel.org/r/20230615063757.3039121-10-aik@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Immediately mark NMIs as unmasked in response to #VMGEXIT(NMI complete)
instead of setting awaiting_iret_completion and waiting until the *next*
VM-Exit to unmask NMIs. The whole point of "NMI complete" is that the
guest is responsible for telling the hypervisor when it's safe to inject
an NMI, i.e. there's no need to wait. And because there's no IRET to
single-step, the next VM-Exit could be a long time coming, i.e. KVM could
incorrectly hold an NMI pending for far longer than what is required and
expected.
Opportunistically fix a stale reference to HF_IRET_MASK.
Fixes: 916b54a768 ("KVM: x86: Move HF_NMI_MASK and HF_IRET_MASK into "struct vcpu_svm"")
Fixes: 4444dfe405 ("KVM: SVM: Add NMI support for an SEV-ES guest")
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20230615063757.3039121-9-aik@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Disable #DB for SEV-ES guests when DebugSwap is enabled. There is no point
in such intercept as KVM does not allow guest debug for SEV-ES guests.
Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Link: https://lore.kernel.org/r/20230615063757.3039121-8-aik@amd.com
[sean: add comment as to why KVM disables #DB intercept iff DebugSwap=1]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add support for "DebugSwap for SEV-ES guests", which provides support
for swapping DR[0-3] and DR[0-3]_ADDR_MASK on VMRUN and VMEXIT, i.e.
allows KVM to expose debug capabilities to SEV-ES guests. Without
DebugSwap support, the CPU doesn't save/load most _guest_ debug
registers (except DR6/7), and KVM cannot manually context switch guest
DRs due the VMSA being encrypted.
Enable DebugSwap if and only if the CPU also supports NoNestedDataBp,
which causes the CPU to ignore nested #DBs, i.e. #DBs that occur when
vectoring a #DB. Without NoNestedDataBp, a malicious guest can DoS
the host by putting the CPU into an infinite loop of vectoring #DBs
(see https://bugzilla.redhat.com/show_bug.cgi?id=1278496)
Set the features bit in sev_es_sync_vmsa() which is the last point
when VMSA is not encrypted yet as sev_(es_)init_vmcb() (where the most
init happens) is called not only when VCPU is initialised but also on
intrahost migration when VMSA is encrypted.
Eliminate DR7 intercepts as KVM can't modify guest DR7, and intercepting
DR7 would completely defeat the purpose of enabling DebugSwap.
Make X86_FEATURE_DEBUG_SWAP appear in /proc/cpuinfo (by not adding "") to
let the operator know if the VM can debug.
Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Link: https://lore.kernel.org/r/20230615063757.3039121-7-aik@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Currently SVM setup is done sequentially in
init_vmcb() -> sev_init_vmcb() -> sev_es_init_vmcb()
and tries keeping SVM/SEV/SEV-ES bits separated. One of the exceptions
is DR intercepts which is for SEV-ES before sev_es_init_vmcb() runs.
Move the SEV-ES intercept setup to sev_es_init_vmcb(). From now on
set_dr_intercepts()/clr_dr_intercepts() handle SVM/SEV only.
No functional change intended.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Reviewed-by: Santosh Shukla <santosh.shukla@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20230615063757.3039121-6-aik@amd.com
[sean: drop comment about intercepting DR7]
Signed-off-by: Sean Christopherson <seanjc@google.com>
SVM/SEV enable debug registers intercepts to skip swapping DRs
on entering/exiting the guest. When the guest is in control of
debug registers (vcpu->guest_debug == 0), there is an optimisation to
reduce the number of context switches: intercepts are cleared and
the KVM_DEBUGREG_WONT_EXIT flag is set to tell KVM to do swapping
on guest enter/exit.
The same code also executes for SEV-ES, however it has no effect as
- it always takes (vcpu->guest_debug == 0) branch;
- KVM_DEBUGREG_WONT_EXIT is set but DR7 intercept is not cleared;
- vcpu_enter_guest() writes DRs but VMRUN for SEV-ES swaps them
with the values from _encrypted_ VMSA.
Be explicit about SEV-ES not supporting debug:
- return right away from dr_interception() and skip unnecessary processing;
- return an error right away from the KVM_SEV_LAUNCH_UPDATE_VMSA handler
if debugging was already enabled.
KVM_SET_GUEST_DEBUG are failing already after KVM_SEV_LAUNCH_UPDATE_VMSA
is finished due to vcpu->arch.guest_state_protected set to true.
Add WARN_ON to kvm_x86::sync_dirty_debug_regs() (saves guest DRs on
guest exit) to signify that SEV-ES won't hit that path.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Link: https://lore.kernel.org/r/20230615063757.3039121-5-aik@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Rewrite the comment(s) in sev_es_prepare_switch_to_guest() to explain the
swap types employed by the CPU for SEV-ES guests, i.e. to explain why KVM
needs to save a seemingly random subset of host state, and to provide a
decoder for the APM's Type-A/B/C terminology.
Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Link: https://lore.kernel.org/r/20230615063757.3039121-4-aik@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Currently SVM setup is done sequentially in
init_vmcb() -> sev_init_vmcb() -> sev_es_init_vmcb() and tries
keeping SVM/SEV/SEV-ES bits separated. One of the exceptions
is #GP intercept which init_vmcb() skips setting for SEV guests and
then sev_es_init_vmcb() needlessly clears it.
Remove the SEV check from init_vmcb(). Clear the #GP intercept in
sev_init_vmcb(). SEV-ES will use the SEV setting.
No functional change intended.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Reviewed-by: Carlos Bilbao <carlos.bilbao@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Santosh Shukla <santosh.shukla@amd.com>
Link: https://lore.kernel.org/r/20230615063757.3039121-3-aik@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Static functions set_dr_intercepts() and clr_dr_intercepts() are only
called from SVM so move them to .c.
No functional change intended.
Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Reviewed-by: Carlos Bilbao <carlos.bilbao@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Santosh Shukla <santosh.shukla@amd.com>
Link: https://lore.kernel.org/r/20230615063757.3039121-2-aik@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add the option to flush IBPB only on VMEXIT in order to protect from
malicious guests but one otherwise trusts the software that runs on the
hypervisor.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
- Drop manual TR/TSS load after VM-Exit now that KVM uses VMLOAD for host state
- Fix a not-yet-problematic missing call to trace_kvm_exit() for VM-Exits that
are handled in the fastpath
- Print more descriptive information about the status of SEV and SEV-ES during
module load
- Assert that misc_cg_set_capacity() doesn't fail to avoid should-be-impossible
memory leaks
-----BEGIN PGP SIGNATURE-----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=rcFn
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-svm-6.5' of https://github.com/kvm-x86/linux into HEAD
KVM SVM changes for 6.5:
- Drop manual TR/TSS load after VM-Exit now that KVM uses VMLOAD for host state
- Fix a not-yet-problematic missing call to trace_kvm_exit() for VM-Exits that
are handled in the fastpath
- Print more descriptive information about the status of SEV and SEV-ES during
module load
- Assert that misc_cg_set_capacity() doesn't fail to avoid should-be-impossible
memory leaks
- Add support for AMD PerfMonV2, with a variety of cleanups and minor fixes
included along the way
-----BEGIN PGP SIGNATURE-----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=MwqV
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-pmu-6.5' of https://github.com/kvm-x86/linux into HEAD
KVM x86/pmu changes for 6.5:
- Add support for AMD PerfMonV2, with a variety of cleanups and minor fixes
included along the way
- Move handling of PAT out of MTRR code and dedup SVM+VMX code
- Fix output of PIC poll command emulation when there's an interrupt
- Fix a longstanding bug in the reporting of the number of entries returned by
KVM_GET_CPUID2
- Add a maintainer's handbook to document KVM x86 processes, preferred coding
style, testing expectations, etc.
- Misc cleanups
-----BEGIN PGP SIGNATURE-----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=D0BH
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-misc-6.5' of https://github.com/kvm-x86/linux into HEAD
KVM x86 changes for 6.5:
* Move handling of PAT out of MTRR code and dedup SVM+VMX code
* Fix output of PIC poll command emulation when there's an interrupt
* Add a maintainer's handbook to document KVM x86 processes, preferred coding
style, testing expectations, etc.
* Misc cleanups
WARN and continue if misc_cg_set_capacity() fails, as the only scenario
in which it can fail is if the specified resource is invalid, which should
never happen when CONFIG_KVM_AMD_SEV=y. Deliberately not bailing "fixes"
a theoretical bug where KVM would leak the ASID bitmaps on failure, which
again can't happen.
If the impossible should happen, the end result is effectively the same
with respect to SEV and SEV-ES (they are unusable), while continuing on
has the advantage of letting KVM load, i.e. userspace can still run
non-SEV guests.
Reported-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Link: https://lore.kernel.org/r/20230607004449.1421131-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
CPUID leaf 0x80000022 i.e. ExtPerfMonAndDbg advertises some new
performance monitoring features for AMD processors.
Bit 0 of EAX indicates support for Performance Monitoring Version 2
(PerfMonV2) features. If found to be set during PMU initialization,
the EBX bits of the same CPUID function can be used to determine
the number of available PMCs for different PMU types.
Expose the relevant bits via KVM_GET_SUPPORTED_CPUID so that
guests can make use of the PerfMonV2 features.
Co-developed-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Like Xu <likexu@tencent.com>
Link: https://lore.kernel.org/r/20230603011058.1038821-13-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
If AMD Performance Monitoring Version 2 (PerfMonV2) is detected by
the guest, it can use a new scheme to manage the Core PMCs using the
new global control and status registers.
In addition to benefiting from the PerfMonV2 functionality in the same
way as the host (higher precision), the guest also can reduce the number
of vm-exits by lowering the total number of MSRs accesses.
In terms of implementation details, amd_is_valid_msr() is resurrected
since three newly added MSRs could not be mapped to one vPMC.
The possibility of emulating PerfMonV2 on the mainframe has also
been eliminated for reasons of precision.
Co-developed-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Like Xu <likexu@tencent.com>
[sean: drop "Based on the observed HW." comments]
Link: https://lore.kernel.org/r/20230603011058.1038821-12-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Cap the number of general purpose counters enumerated on AMD to what KVM
actually supports, i.e. don't allow userspace to coerce KVM into thinking
there are more counters than actually exist, e.g. by enumerating
X86_FEATURE_PERFCTR_CORE in guest CPUID when its not supported.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Like Xu <likexu@tencent.com>
[sean: massage changelog]
Link: https://lore.kernel.org/r/20230603011058.1038821-10-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Enable and advertise PERFCTR_CORE if and only if the minimum number of
required counters are available, i.e. if perf says there are less than six
general purpose counters.
Opportunistically, use kvm_cpu_cap_check_and_set() instead of open coding
the check for host support.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Like Xu <likexu@tencent.com>
[sean: massage shortlog and changelog]
Link: https://lore.kernel.org/r/20230603011058.1038821-9-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Disable PMU support when running on AMD and perf reports fewer than four
general purpose counters. All AMD PMUs must define at least four counters
due to AMD's legacy architecture hardcoding the number of counters
without providing a way to enumerate the number of counters to software,
e.g. from AMD's APM:
The legacy architecture defines four performance counters (PerfCtrn)
and corresponding event-select registers (PerfEvtSeln).
Virtualizing fewer than four counters can lead to guest instability as
software expects four counters to be available. Rather than bleed AMD
details into the common code, just define a const unsigned int and
provide a convenient location to document why Intel and AMD have different
mins (in particular, AMD's lack of any way to enumerate less than four
counters to the guest).
Keep the minimum number of counters at Intel at one, even though old P6
and Core Solo/Duo processor effectively require a minimum of two counters.
KVM can, and more importantly has up until this point, supported a vPMU so
long as the CPU has at least one counter. Perf's support for P6/Core CPUs
does require two counters, but perf will happily chug along with a single
counter when running on a modern CPU.
Cc: Jim Mattson <jmattson@google.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Like Xu <likexu@tencent.com>
[sean: set Intel min to '1', not '2']
Link: https://lore.kernel.org/r/20230603011058.1038821-8-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Move the Intel PMU implementation of pmc_is_enabled() to common x86 code
as pmc_is_globally_enabled(), and drop AMD's implementation. AMD PMU
currently supports only v1, and thus not PERF_GLOBAL_CONTROL, thus the
semantics for AMD are unchanged. And when support for AMD PMU v2 comes
along, the common behavior will also Just Work.
Signed-off-by: Like Xu <likexu@tencent.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20230603011058.1038821-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
As test_bit() returns bool, explicitly converting result to bool is
unnecessary. Get rid of '!!'.
No functional change intended.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://lore.kernel.org/r/20230605200158.118109-1-mhal@rbox.co
Signed-off-by: Sean Christopherson <seanjc@google.com>
Let's print available ASID ranges for SEV/SEV-ES guests.
This information can be useful for system administrator
to debug if SEV/SEV-ES fails to enable.
There are a few reasons.
SEV:
- NPT is disabled (module parameter)
- CPU lacks some features (sev, decodeassists)
- Maximum SEV ASID is 0
SEV-ES:
- mmio_caching is disabled (module parameter)
- CPU lacks sev_es feature
- Minimum SEV ASID value is 1 (can be adjusted in BIOS/UEFI)
Cc: Sean Christopherson <seanjc@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Stéphane Graber <stgraber@ubuntu.com>
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Link: https://lore.kernel.org/r/20230522161249.800829-3-aleksandr.mikhalitsyn@canonical.com
[sean: print '0' for min SEV-ES ASID if there are no available ASIDs]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Move SVM's call to trace_kvm_exit() from the "slow" VM-Exit handler to
svm_vcpu_run() so that KVM traces fastpath VM-Exits that re-enter the
guest without bouncing through the slow path. This bug is benign in the
current code base as KVM doesn't currently support any such exits on SVM.
Fixes: a9ab13ff6e ("KVM: X86: Improve latency for single target IPI fastpath")
Link: https://lore.kernel.org/r/20230602011920.787844-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
While testing Hyper-V enabled Windows Server 2019 guests on Zen4 hardware
I noticed that with vCPU count large enough (> 16) they sometimes froze at
boot.
With vCPU count of 64 they never booted successfully - suggesting some kind
of a race condition.
Since adding "vnmi=0" module parameter made these guests boot successfully
it was clear that the problem is most likely (v)NMI-related.
Running kvm-unit-tests quickly showed failing NMI-related tests cases, like
"multiple nmi" and "pending nmi" from apic-split, x2apic and xapic tests
and the NMI parts of eventinj test.
The issue was that once one NMI was being serviced no other NMI was allowed
to be set pending (NMI limit = 0), which was traced to
svm_is_vnmi_pending() wrongly testing for the "NMI blocked" flag rather
than for the "NMI pending" flag.
Fix this by testing for the right flag in svm_is_vnmi_pending().
Once this is done, the NMI-related kvm-unit-tests pass successfully and
the Windows guest no longer freezes at boot.
Fixes: fa4c027a79 ("KVM: x86: Add support for SVM's Virtual NMI")
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/be4ca192eb0c1e69a210db3009ca984e6a54ae69.1684495380.git.maciej.szmigiero@oracle.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Move the common check-and-set handling of PAT MSR writes out of vendor
code and into kvm_set_msr_common(). This aligns writes with reads, which
are already handled in common code, i.e. makes the handling of reads and
writes symmetrical in common code.
Alternatively, the common handling in kvm_get_msr_common() could be moved
to vendor code, but duplicating code is generally undesirable (even though
the duplicatated code is trivial in this case), and guest writes to PAT
should be rare, i.e. the overhead of the extra function call is a
non-issue in practice.
Suggested-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20230511233351.635053-9-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use kvm_pat_valid() directly instead of bouncing through kvm_mtrr_valid().
The PAT is not an MTRR, and kvm_mtrr_valid() just redirects to
kvm_pat_valid(), i.e. is exempt from KVM's "zap SPTEs" logic that's
needed to honor guest MTRRs when the VM has a passthrough device with
non-coherent DMA (KVM does NOT set "ignore guest PAT" in this case, and so
enables hardware virtualization of the guest's PAT, i.e. doesn't need to
manually emulate the PAT memtype).
Signed-off-by: Ke Guo <guoke@uniontech.com>
[sean: massage changelog]
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20230511233351.635053-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
* More phys_to_virt conversions
* Improvement of AP management for VSIE (nested virtualization)
ARM64:
* Numerous fixes for the pathological lock inversion issue that
plagued KVM/arm64 since... forever.
* New framework allowing SMCCC-compliant hypercalls to be forwarded
to userspace, hopefully paving the way for some more features
being moved to VMMs rather than be implemented in the kernel.
* Large rework of the timer code to allow a VM-wide offset to be
applied to both virtual and physical counters as well as a
per-timer, per-vcpu offset that complements the global one.
This last part allows the NV timer code to be implemented on
top.
* A small set of fixes to make sure that we don't change anything
affecting the EL1&0 translation regime just after having having
taken an exception to EL2 until we have executed a DSB. This
ensures that speculative walks started in EL1&0 have completed.
* The usual selftest fixes and improvements.
KVM x86 changes for 6.4:
* Optimize CR0.WP toggling by avoiding an MMU reload when TDP is enabled,
and by giving the guest control of CR0.WP when EPT is enabled on VMX
(VMX-only because SVM doesn't support per-bit controls)
* Add CR0/CR4 helpers to query single bits, and clean up related code
where KVM was interpreting kvm_read_cr4_bits()'s "unsigned long" return
as a bool
* Move AMD_PSFD to cpufeatures.h and purge KVM's definition
* Avoid unnecessary writes+flushes when the guest is only adding new PTEs
* Overhaul .sync_page() and .invlpg() to utilize .sync_page()'s optimizations
when emulating invalidations
* Clean up the range-based flushing APIs
* Revamp the TDP MMU's reaping of Accessed/Dirty bits to clear a single
A/D bit using a LOCK AND instead of XCHG, and skip all of the "handle
changed SPTE" overhead associated with writing the entire entry
* Track the number of "tail" entries in a pte_list_desc to avoid having
to walk (potentially) all descriptors during insertion and deletion,
which gets quite expensive if the guest is spamming fork()
* Disallow virtualizing legacy LBRs if architectural LBRs are available,
the two are mutually exclusive in hardware
* Disallow writes to immutable feature MSRs (notably PERF_CAPABILITIES)
after KVM_RUN, similar to CPUID features
* Overhaul the vmx_pmu_caps selftest to better validate PERF_CAPABILITIES
* Apply PMU filters to emulated events and add test coverage to the
pmu_event_filter selftest
x86 AMD:
* Add support for virtual NMIs
* Fixes for edge cases related to virtual interrupts
x86 Intel:
* Don't advertise XTILE_CFG in KVM_GET_SUPPORTED_CPUID if XTILE_DATA is
not being reported due to userspace not opting in via prctl()
* Fix a bug in emulation of ENCLS in compatibility mode
* Allow emulation of NOP and PAUSE for L2
* AMX selftests improvements
* Misc cleanups
MIPS:
* Constify MIPS's internal callbacks (a leftover from the hardware enabling
rework that landed in 6.3)
Generic:
* Drop unnecessary casts from "void *" throughout kvm_main.c
* Tweak the layout of "struct kvm_mmu_memory_cache" to shrink the struct
size by 8 bytes on 64-bit kernels by utilizing a padding hole
Documentation:
* Fix goof introduced by the conversion to rST
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmRNExkUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNyjwf+MkzDael9y9AsOZoqhEZ5OsfQYJ32
Im5ZVYsPRU2K5TuoWql6meIihgclCj1iIU32qYHa2F1WYt2rZ72rJp+HoY8b+TaI
WvF0pvNtqQyg3iEKUBKPA4xQ6mj7RpQBw86qqiCHmlfNt0zxluEGEPxH8xrWcfhC
huDQ+NUOdU7fmJ3rqGitCvkUbCuZNkw3aNPR8dhU8RAWrwRzP2hBOmdxIeo81WWY
XMEpJSijbGpXL9CvM0Jz9nOuMJwZwCCBGxg1vSQq0xTfLySNMxzvWZC2GFaBjucb
j0UOQ7yE0drIZDVhd3sdNslubXXU6FcSEzacGQb9aigMUon3Tem9SHi7Kw==
=S2Hq
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"s390:
- More phys_to_virt conversions
- Improvement of AP management for VSIE (nested virtualization)
ARM64:
- Numerous fixes for the pathological lock inversion issue that
plagued KVM/arm64 since... forever.
- New framework allowing SMCCC-compliant hypercalls to be forwarded
to userspace, hopefully paving the way for some more features being
moved to VMMs rather than be implemented in the kernel.
- Large rework of the timer code to allow a VM-wide offset to be
applied to both virtual and physical counters as well as a
per-timer, per-vcpu offset that complements the global one. This
last part allows the NV timer code to be implemented on top.
- A small set of fixes to make sure that we don't change anything
affecting the EL1&0 translation regime just after having having
taken an exception to EL2 until we have executed a DSB. This
ensures that speculative walks started in EL1&0 have completed.
- The usual selftest fixes and improvements.
x86:
- Optimize CR0.WP toggling by avoiding an MMU reload when TDP is
enabled, and by giving the guest control of CR0.WP when EPT is
enabled on VMX (VMX-only because SVM doesn't support per-bit
controls)
- Add CR0/CR4 helpers to query single bits, and clean up related code
where KVM was interpreting kvm_read_cr4_bits()'s "unsigned long"
return as a bool
- Move AMD_PSFD to cpufeatures.h and purge KVM's definition
- Avoid unnecessary writes+flushes when the guest is only adding new
PTEs
- Overhaul .sync_page() and .invlpg() to utilize .sync_page()'s
optimizations when emulating invalidations
- Clean up the range-based flushing APIs
- Revamp the TDP MMU's reaping of Accessed/Dirty bits to clear a
single A/D bit using a LOCK AND instead of XCHG, and skip all of
the "handle changed SPTE" overhead associated with writing the
entire entry
- Track the number of "tail" entries in a pte_list_desc to avoid
having to walk (potentially) all descriptors during insertion and
deletion, which gets quite expensive if the guest is spamming
fork()
- Disallow virtualizing legacy LBRs if architectural LBRs are
available, the two are mutually exclusive in hardware
- Disallow writes to immutable feature MSRs (notably
PERF_CAPABILITIES) after KVM_RUN, similar to CPUID features
- Overhaul the vmx_pmu_caps selftest to better validate
PERF_CAPABILITIES
- Apply PMU filters to emulated events and add test coverage to the
pmu_event_filter selftest
- AMD SVM:
- Add support for virtual NMIs
- Fixes for edge cases related to virtual interrupts
- Intel AMX:
- Don't advertise XTILE_CFG in KVM_GET_SUPPORTED_CPUID if
XTILE_DATA is not being reported due to userspace not opting in
via prctl()
- Fix a bug in emulation of ENCLS in compatibility mode
- Allow emulation of NOP and PAUSE for L2
- AMX selftests improvements
- Misc cleanups
MIPS:
- Constify MIPS's internal callbacks (a leftover from the hardware
enabling rework that landed in 6.3)
Generic:
- Drop unnecessary casts from "void *" throughout kvm_main.c
- Tweak the layout of "struct kvm_mmu_memory_cache" to shrink the
struct size by 8 bytes on 64-bit kernels by utilizing a padding
hole
Documentation:
- Fix goof introduced by the conversion to rST"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (211 commits)
KVM: s390: pci: fix virtual-physical confusion on module unload/load
KVM: s390: vsie: clarifications on setting the APCB
KVM: s390: interrupt: fix virtual-physical confusion for next alert GISA
KVM: arm64: Have kvm_psci_vcpu_on() use WRITE_ONCE() to update mp_state
KVM: arm64: Acquire mp_state_lock in kvm_arch_vcpu_ioctl_vcpu_init()
KVM: selftests: Test the PMU event "Instructions retired"
KVM: selftests: Copy full counter values from guest in PMU event filter test
KVM: selftests: Use error codes to signal errors in PMU event filter test
KVM: selftests: Print detailed info in PMU event filter asserts
KVM: selftests: Add helpers for PMC asserts in PMU event filter test
KVM: selftests: Add a common helper for the PMU event filter guest code
KVM: selftests: Fix spelling mistake "perrmited" -> "permitted"
KVM: arm64: vhe: Drop extra isb() on guest exit
KVM: arm64: vhe: Synchronise with page table walker on MMU update
KVM: arm64: pkvm: Document the side effects of kvm_flush_dcache_to_poc()
KVM: arm64: nvhe: Synchronise with page table walker on TLBI
KVM: arm64: Handle 32bit CNTPCTSS traps
KVM: arm64: nvhe: Synchronise with page table walker on vcpu run
KVM: arm64: vgic: Don't acquire its_lock before config_lock
KVM: selftests: Add test to verify KVM's supported XCR0
...
- Remove diagnostics and adjust config for CSD lock diagnostics
- Add a generic IPI-sending tracepoint, as currently there's no easy
way to instrument IPI origins: it's arch dependent and for some
major architectures it's not even consistently available.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Wp7f
-----END PGP SIGNATURE-----
Merge tag 'smp-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull SMP cross-CPU function-call updates from Ingo Molnar:
- Remove diagnostics and adjust config for CSD lock diagnostics
- Add a generic IPI-sending tracepoint, as currently there's no easy
way to instrument IPI origins: it's arch dependent and for some major
architectures it's not even consistently available.
* tag 'smp-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
trace,smp: Trace all smp_function_call*() invocations
trace: Add trace_ipi_send_cpu()
sched, smp: Trace smp callback causing an IPI
smp: reword smp call IPI comment
treewide: Trace IPIs sent via smp_send_reschedule()
irq_work: Trace self-IPIs sent via arch_irq_work_raise()
smp: Trace IPIs sent via arch_send_call_function_ipi_mask()
sched, smp: Trace IPIs sent via send_call_function_single_ipi()
trace: Add trace_ipi_send_cpumask()
kernel/smp: Make csdlock_debug= resettable
locking/csd_lock: Remove per-CPU data indirection from CSD lock debugging
locking/csd_lock: Remove added data from CSD lock debugging
locking/csd_lock: Add Kconfig option for csd_debug default
- Add support for virtual NMIs
- Fixes for edge cases related to virtual interrupts
-----BEGIN PGP SIGNATURE-----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=9xNX
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-svm-6.4' of https://github.com/kvm-x86/linux into HEAD
KVM SVM changes for 6.4:
- Add support for virtual NMIs
- Fixes for edge cases related to virtual interrupts
- Disallow virtualizing legacy LBRs if architectural LBRs are available,
the two are mutually exclusive in hardware
- Disallow writes to immutable feature MSRs (notably PERF_CAPABILITIES)
after KVM_RUN, and overhaul the vmx_pmu_caps selftest to better
validate PERF_CAPABILITIES
- Apply PMU filters to emulated events and add test coverage to the
pmu_event_filter selftest
- Misc cleanups and fixes
-----BEGIN PGP SIGNATURE-----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=m18F
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-pmu-6.4' of https://github.com/kvm-x86/linux into HEAD
KVM x86 PMU changes for 6.4:
- Disallow virtualizing legacy LBRs if architectural LBRs are available,
the two are mutually exclusive in hardware
- Disallow writes to immutable feature MSRs (notably PERF_CAPABILITIES)
after KVM_RUN, and overhaul the vmx_pmu_caps selftest to better
validate PERF_CAPABILITIES
- Apply PMU filters to emulated events and add test coverage to the
pmu_event_filter selftest
- Misc cleanups and fixes
- Tweak FNAME(sync_spte) to avoid unnecessary writes+flushes when the
guest is only adding new PTEs
- Overhaul .sync_page() and .invlpg() to share the .sync_page()
implementation, i.e. utilize .sync_page()'s optimizations when emulating
invalidations
- Clean up the range-based flushing APIs
- Revamp the TDP MMU's reaping of Accessed/Dirty bits to clear a single
A/D bit using a LOCK AND instead of XCHG, and skip all of the "handle
changed SPTE" overhead associated with writing the entire entry
- Track the number of "tail" entries in a pte_list_desc to avoid having
to walk (potentially) all descriptors during insertion and deletion,
which gets quite expensive if the guest is spamming fork()
- Misc cleanups
-----BEGIN PGP SIGNATURE-----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=zb4u
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-mmu-6.4' of https://github.com/kvm-x86/linux into HEAD
KVM x86 MMU changes for 6.4:
- Tweak FNAME(sync_spte) to avoid unnecessary writes+flushes when the
guest is only adding new PTEs
- Overhaul .sync_page() and .invlpg() to share the .sync_page()
implementation, i.e. utilize .sync_page()'s optimizations when emulating
invalidations
- Clean up the range-based flushing APIs
- Revamp the TDP MMU's reaping of Accessed/Dirty bits to clear a single
A/D bit using a LOCK AND instead of XCHG, and skip all of the "handle
changed SPTE" overhead associated with writing the entire entry
- Track the number of "tail" entries in a pte_list_desc to avoid having
to walk (potentially) all descriptors during insertion and deletion,
which gets quite expensive if the guest is spamming fork()
- Misc cleanups
- Optimize CR0.WP toggling by avoiding an MMU reload when TDP is enabled,
and by giving the guest control of CR0.WP when EPT is enabled on VMX
(VMX-only because SVM doesn't support per-bit controls)
- Add CR0/CR4 helpers to query single bits, and clean up related code
where KVM was interpreting kvm_read_cr4_bits()'s "unsigned long" return
as a bool
- Move AMD_PSFD to cpufeatures.h and purge KVM's definition
- Misc cleanups
-----BEGIN PGP SIGNATURE-----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=qj7D
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-misc-6.4' of https://github.com/kvm-x86/linux into HEAD
KVM x86 changes for 6.4:
- Optimize CR0.WP toggling by avoiding an MMU reload when TDP is enabled,
and by giving the guest control of CR0.WP when EPT is enabled on VMX
(VMX-only because SVM doesn't support per-bit controls)
- Add CR0/CR4 helpers to query single bits, and clean up related code
where KVM was interpreting kvm_read_cr4_bits()'s "unsigned long" return
as a bool
- Move AMD_PSFD to cpufeatures.h and purge KVM's definition
- Misc cleanups
API:
- Total usage stats now include all that returned error (instead of some).
- Remove maximum hash statesize limit.
- Add cloning support for hmac and unkeyed hashes.
- Demote BUG_ON in crypto_unregister_alg to a WARN_ON.
Algorithms:
- Use RIP-relative addressing on x86 to prepare for PIE build.
- Add accelerated AES/GCM stitched implementation on powerpc P10.
- Add some test vectors for cmac(camellia).
- Remove failure case where jent is unavailable outside of FIPS mode in drbg.
- Add permanent and intermittent health error checks in jitter RNG.
Drivers:
- Add support for 402xx devices in qat.
- Add support for HiSTB TRNG.
- Fix hash concurrency issues in stm32.
- Add OP-TEE firmware support in caam.
-----BEGIN PGP SIGNATURE-----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=ITkW
-----END PGP SIGNATURE-----
Merge tag 'v6.4-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Total usage stats now include all that returned errors (instead of
just some)
- Remove maximum hash statesize limit
- Add cloning support for hmac and unkeyed hashes
- Demote BUG_ON in crypto_unregister_alg to a WARN_ON
Algorithms:
- Use RIP-relative addressing on x86 to prepare for PIE build
- Add accelerated AES/GCM stitched implementation on powerpc P10
- Add some test vectors for cmac(camellia)
- Remove failure case where jent is unavailable outside of FIPS mode
in drbg
- Add permanent and intermittent health error checks in jitter RNG
Drivers:
- Add support for 402xx devices in qat
- Add support for HiSTB TRNG
- Fix hash concurrency issues in stm32
- Add OP-TEE firmware support in caam"
* tag 'v6.4-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (139 commits)
i2c: designware: Add doorbell support for Mendocino
i2c: designware: Use PCI PSP driver for communication
powerpc: Move Power10 feature PPC_MODULE_FEATURE_P10
crypto: p10-aes-gcm - Remove POWER10_CPU dependency
crypto: testmgr - Add some test vectors for cmac(camellia)
crypto: cryptd - Add support for cloning hashes
crypto: cryptd - Convert hash to use modern init_tfm/exit_tfm
crypto: hmac - Add support for cloning
crypto: hash - Add crypto_clone_ahash/shash
crypto: api - Add crypto_clone_tfm
crypto: api - Add crypto_tfm_get
crypto: x86/sha - Use local .L symbols for code
crypto: x86/crc32 - Use local .L symbols for code
crypto: x86/aesni - Use local .L symbols for code
crypto: x86/sha256 - Use RIP-relative addressing
crypto: x86/ghash - Use RIP-relative addressing
crypto: x86/des3 - Use RIP-relative addressing
crypto: x86/crc32c - Use RIP-relative addressing
crypto: x86/cast6 - Use RIP-relative addressing
crypto: x86/cast5 - Use RIP-relative addressing
...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZEYCQAAKCRBZ7Krx/gZQ
64FdAQDZ2hTDyZEWPt486dWYPYpiKyaGFXSXDGo7wgP0fiwxXQEA/mROKb6JqYw6
27mZ9A7qluT8r3AfTTQ0D+Yse/dr4AM=
=GA9W
-----END PGP SIGNATURE-----
Merge tag 'pull-fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs fget updates from Al Viro:
"fget() to fdget() conversions"
* tag 'pull-fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fuse_dev_ioctl(): switch to fdget()
cgroup_get_from_fd(): switch to fdget_raw()
bpf: switch to fdget_raw()
build_mount_idmapped(): switch to fdget()
kill the last remaining user of proc_ns_fget()
SVM-SEV: convert the rest of fget() uses to fdget() in there
convert sgx_set_attribute() to fdget()/fdput()
convert setns(2) to fdget()/fdput()
Rename the Hyper-V hooks for TLB flushing to match the naming scheme used
by all the other TLB flushing hooks, e.g. in kvm_x86_ops, vendor code,
arch hooks from common code, etc.
Reviewed-by: David Matlack <dmatlack@google.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20230405003133.419177-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Fix a "reprogam" => "reprogram" typo in kvm_pmu_request_counter_reprogam().
Fixes: 68fb4757e8 ("KVM: x86/pmu: Defer reprogram_counter() to kvm_pmu_handle_event()")
Signed-off-by: Like Xu <likexu@tencent.com>
Link: https://lore.kernel.org/r/20230310113349.31799-1-likexu@tencent.com
[sean: trim the changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add macros to track the range of VMX feature MSRs that are emulated by
KVM to reduce the maintenance cost of extending the set of emulated MSRs.
Note, KVM doesn't necessarily emulate all known/consumed VMX MSRs, e.g.
PROCBASED_CTLS3 is consumed by KVM to enable IPI virtualization, but is
not emulated as KVM doesn't emulate/virtualize IPI virtualization for
nested guests.
No functional change intended.
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20230311004618.920745-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Rename "r" to "ret" and actually return it from svm_set_msr() to reduce
the probability of repeating the mistake of commit 723d5fb0ff ("kvm:
svm: Add IA32_FLUSH_CMD guest support"), which set "r" thinking that it
would be propagated to the caller.
Alternatively, the declaration of "r" could be moved into the handling of
MSR_TSC_AUX, but that risks variable shadowing in the future. A wrapper
for kvm_set_user_return_msr() would allow eliding a local variable, but
that feels like delaying the inevitable.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230322011440.2195485-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Virtualize FLUSH_L1D so that the guest can use the performant L1D flush
if one of the many mitigations might require a flush in the guest, e.g.
Linux provides an option to flush the L1D when switching mms.
Passthrough MSR_IA32_FLUSH_CMD for write when it's supported in hardware
and exposed to the guest, i.e. always let the guest write it directly if
FLUSH_L1D is fully supported.
Forward writes to hardware in host context on the off chance that KVM
ends up emulating a WRMSR, or in the really unlikely scenario where
userspace wants to force a flush. Restrict these forwarded WRMSRs to
the known command out of an abundance of caution. Passing through the
MSR means the guest can throw any and all values at hardware, but doing
so in host context is arguably a bit more dangerous.
Link: https://lkml.kernel.org/r/CALMp9eTt3xzAEoQ038bJQ9LN0ZOXrSWsN7xnNUD%2B0SS%3DWwF7Pg%40mail.gmail.com
Link: https://lore.kernel.org/all/20230201132905.549148-2-eesposit@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230322011440.2195485-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Dedup the handling of MSR_IA32_PRED_CMD across VMX and SVM by moving the
logic to kvm_set_msr_common(). Now that the MSR interception toggling is
handled as part of setting guest CPUID, the VMX and SVM paths are
identical.
Opportunistically massage the code to make it a wee bit denser.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-Id: <20230322011440.2195485-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Passthrough MSR_IA32_PRED_CMD based purely on whether or not the MSR is
supported and enabled, i.e. don't wait until the first write. There's no
benefit to deferred passthrough, and the extra logic only adds complexity.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230322011440.2195485-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Revert the recently added virtualizing of MSR_IA32_FLUSH_CMD, as both
the VMX and SVM are fatally buggy to guests that use MSR_IA32_FLUSH_CMD or
MSR_IA32_PRED_CMD, and because the entire foundation of the logic is
flawed.
The most immediate problem is an inverted check on @cmd that results in
rejecting legal values. SVM doubles down on bugs and drops the error,
i.e. silently breaks all guest mitigations based on the command MSRs.
The next issue is that neither VMX nor SVM was updated to mark
MSR_IA32_FLUSH_CMD as being a possible passthrough MSR,
which isn't hugely problematic, but does break MSR filtering and triggers
a WARN on VMX designed to catch this exact bug.
The foundational issues stem from the MSR_IA32_FLUSH_CMD code reusing
logic from MSR_IA32_PRED_CMD, which in turn was likely copied from KVM's
support for MSR_IA32_SPEC_CTRL. The copy+paste from MSR_IA32_SPEC_CTRL
was misguided as MSR_IA32_PRED_CMD (and MSR_IA32_FLUSH_CMD) is a
write-only MSR, i.e. doesn't need the same "deferred passthrough"
shenanigans as MSR_IA32_SPEC_CTRL.
Revert all MSR_IA32_FLUSH_CMD enabling in one fell swoop so that there is
no point where KVM advertises, but does not support, L1D_FLUSH.
This reverts commits 45cf86f261,
723d5fb0ff, and
a807b78ad0.
Reported-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lkml.kernel.org/r/20230317190432.GA863767%40dev-arch.thelio-3990X
Cc: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Cc: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Cc: Jim Mattson <jmattson@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Mathias Krause <minipli@grsecurity.net>
Message-Id: <20230322011440.2195485-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The Hyper-V "EnlightenedNptTlb" enlightenment is always enabled when KVM
is running on top of Hyper-V and Hyper-V exposes support for it (which
is always). On AMD CPUs this enlightenment results in ASID invalidations
not flushing TLB entries derived from the NPT. To force the underlying
(L0) hypervisor to rebuild its shadow page tables, an explicit hypercall
is needed.
The original KVM implementation of Hyper-V's "EnlightenedNptTlb" on SVM
only added remote TLB flush hooks. This worked out fine for a while, as
sufficient remote TLB flushes where being issued in KVM to mask the
problem. Since v5.17, changes in the TDP code reduced the number of
flushes and the out-of-sync TLB prevents guests from booting
successfully.
Split svm_flush_tlb_current() into separate callbacks for the 3 cases
(guest/all/current), and issue the required Hyper-V hypercall when a
Hyper-V TLB flush is needed. The most important case where the TLB flush
was missing is when loading a new PGD, which is followed by what is now
svm_flush_tlb_current().
Cc: stable@vger.kernel.org # v5.17+
Fixes: 1e0c7d4075 ("KVM: SVM: hyper-v: Remote TLB flush for SVM")
Link: https://lore.kernel.org/lkml/43980946-7bbf-dcef-7e40-af904c456250@linux.microsoft.com/
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Jeremi Piotrowski <jpiotrowski@linux.microsoft.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20230324145233.4585-1-jpiotrowski@linux.microsoft.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To be able to trace invocations of smp_send_reschedule(), rename the
arch-specific definitions of it to arch_smp_send_reschedule() and wrap it
into an smp_send_reschedule() that contains a tracepoint.
Changes to include the declaration of the tracepoint were driven by the
following coccinelle script:
@func_use@
@@
smp_send_reschedule(...);
@include@
@@
#include <trace/events/ipi.h>
@no_include depends on func_use && !include@
@@
#include <...>
+
+ #include <trace/events/ipi.h>
[csky bits]
[riscv bits]
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Guo Ren <guoren@kernel.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230307143558.294354-6-vschneid@redhat.com
Allow L1 to use vNMI to accelerate its injection of NMI to L2 by
propagating vNMI int_ctl bits from/to vmcb12 to/from vmcb02.
To handle both the case where vNMI is enabled for L1 and L2, and where
vNMI is enabled for L1 but _not_ L2, move pending L1 vNMIs to nmi_pending
on nested VM-Entry and raise KVM_REQ_EVENT, i.e. rely on existing code to
route the NMI to the correct domain.
On nested VM-Exit, reverse the process and set/clear V_NMI_PENDING for L1
based one whether nmi_pending is zero or non-zero. There is no need to
consider vmcb02 in this case, as V_NMI_PENDING can be set in vmcb02 if
vNMI is disabled for L2, and if vNMI is enabled for L2, then L1 and L2
have different NMI contexts.
Co-developed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Santosh Shukla <santosh.shukla@amd.com>
Link: https://lore.kernel.org/r/20230227084016.3368-12-santosh.shukla@amd.com
[sean: massage changelog to match the code]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add support for SVM's Virtual NMIs implementation, which adds proper
tracking of virtual NMI blocking, and an intr_ctrl flag that software can
set to mark a virtual NMI as pending. Pending virtual NMIs are serviced
by hardware if/when virtual NMIs become unblocked, i.e. act more or less
like real NMIs.
Introduce two new kvm_x86_ops callbacks so to support SVM's vNMI, as KVM
needs to treat a pending vNMI as partially injected. Specifically, if
two NMIs (for L1) arrive concurrently in KVM's software model, KVM's ABI
is to inject one and pend the other. Without vNMI, KVM manually tracks
the pending NMI and uses NMI windows to detect when the NMI should be
injected.
With vNMI, the pending NMI is simply stuffed into the VMCB and handed
off to hardware. This means that KVM needs to be able to set a vNMI
pending on-demand, and also query if a vNMI is pending, e.g. to honor the
"at most one NMI pending" rule and to preserve all NMIs across save and
restore.
Warn if KVM attempts to open an NMI window when vNMI is fully enabled,
as the above logic should prevent KVM from ever getting to
kvm_check_and_inject_events() with two NMIs pending _in software_, and
the "at most one NMI pending" logic should prevent having an NMI pending
in hardware and an NMI pending in software if NMIs are also blocked, i.e.
if KVM can't immediately inject the second NMI.
Signed-off-by: Santosh Shukla <Santosh.Shukla@amd.com>
Co-developed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20230227084016.3368-11-santosh.shukla@amd.com
[sean: rewrite shortlog and changelog, massage code comments]
Signed-off-by: Sean Christopherson <seanjc@google.com>
SEV-ES guests don't use IRET interception for the detection of
an end of a NMI.
Therefore it makes sense to create a wrapper to avoid repeating
the check for the SEV-ES.
No functional change is intended.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
[Renamed iret intercept API of style svm_{clr,set}_iret_intercept()]
Signed-off-by: Santosh Shukla <Santosh.Shukla@amd.com>
Link: https://lore.kernel.org/r/20230227084016.3368-5-santosh.shukla@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
If L1 doesn't intercept interrupts, then KVM will use vmcb02's V_IRQ
to detect an interrupt window for L1 IRQs. On a subsequent nested
VM-Exit, KVM might need to copy the current V_IRQ from vmcb02 to vmcb01
to continue waiting for an interrupt window, i.e. if there is still a
pending IRQ for L1.
Raise KVM_REQ_EVENT on nested exit if L1 isn't intercepting IRQs to ensure
that KVM will re-enable interrupt window detection if needed.
Note that this is a theoretical bug because KVM already raises
KVM_REQ_EVENT on each nested VM exit, because the nested VM exit resets
RFLAGS and kvm_set_rflags() raises the KVM_REQ_EVENT unconditionally.
Explicitly raise KVM_REQ_EVENT for the interrupt window case to avoid
having an unnecessary dependency on kvm_set_rflags(), and to document
the scenario.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
[santosh: reworded description as per Sean's v2 comment]
Signed-off-by: Santosh Shukla <Santosh.Shukla@amd.com>
Link: https://lore.kernel.org/r/20230227084016.3368-4-santosh.shukla@amd.com
[sean: further massage changelog and comment]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Disable intercept of virtual interrupts (used to detect interrupt windows)
if the saved host (L1) RFLAGS.IF is '0', as the effective RFLAGS.IF for L1
interrupts will never be set while L2 is running (L2's RFLAGS.IF doesn't
affect L1 IRQs when virtual interrupts are enabled).
Suggested-by: Sean Christopherson <seanjc@google.com>
Link: https://lkml.kernel.org/r/Y9hybI65So5X2LFg%40google.com
Signed-off-by: Santosh Shukla <Santosh.Shukla@amd.com>
Link: https://lore.kernel.org/r/20230227084016.3368-3-santosh.shukla@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Don't sync vmcb02 V_IRQ back to vmcb12 if KVM (L0) is intercepting
virtual interrupts in order to request an interrupt window, as KVM
has usurped vmcb02's int_ctl. If an interrupt window opens before
the next VM-Exit, svm_clear_vintr() will restore vmcb12's int_ctl.
If no window opens, V_IRQ will be correctly preserved in vmcb12's
int_ctl (because it was never recognized while L2 was running).
Suggested-by: Sean Christopherson <seanjc@google.com>
Link: https://lkml.kernel.org/r/Y9hybI65So5X2LFg%40google.com
Signed-off-by: Santosh Shukla <Santosh.Shukla@amd.com>
Link: https://lore.kernel.org/r/20230227084016.3368-2-santosh.shukla@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use kvm_is_cr4_bit_set() to query SMAP and SMEP when determining whether
or not AMD's SMAP+SEV errata prevents KVM from emulating an instruction.
This eliminates an implicit cast from ulong to bool and makes the code
slightly more readable.
Note, any overhead from making multiple calls to kvm_read_cr4_bits() is
negligible, not to mention the code is question is encountered only in
rare situations, i.e. is not a remotely hot path.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
Link: https://lore.kernel.org/r/20230322045824.22970-4-binbin.wu@linux.intel.com
[sean: keep local smap/smep variables, massage changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Convert is_{pae,pse,paging}() to use kvm_is_cr{0,4}_bit_set() and return
bools. Returning an "int" requires not one, but two implicit casts, first
from "unsigned long" to "int", and then again to a "bool". Both casts are
more than a bit dangerous; the ulong=>int casts would drop a bit on 64-bit
kernels _if_ the bits in question weren't in the lower 32 bits, and the
int=>bool cast can result in false negatives/positives, e.g. see commit
0c928ff26b ("KVM: SVM: Fix benign "bool vs. int" comparison in
svm_set_cr0()").
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
Link: https://lore.kernel.org/r/20230322045824.22970-3-binbin.wu@linux.intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Explicitly convert the return from is_paging() to a bool when comparing
against old_paging, which is also a boolean. is_paging() sneakily uses
kvm_read_cr0_bits() and returns an int, i.e. returns X86_CR0_PG or 0, not
1 or 0.
Luckily, the bug is benign as it only results in a false positive, not a
false negative, i.e. only causes a spurious refresh of CR4 when paging is
enabled in both the old and new.
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Fixes: c53bbe2145 ("KVM: x86: SVM: don't passthrough SMAP/SMEP/PKE bits in !NPT && !gCR0.PG case")
Signed-off-by: Sean Christopherson <seanjc@google.com>
The TEE subdriver for CCP, the amdtee driver and the i2c-designware-amdpsp
drivers all include `psp-sev.h` even though they don't use SEV
functionality.
Move the definition of `__psp_pa` into a common header to be included
by all of these drivers.
Reviewed-by: Jan Dabros <jsd@semihalf.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> # For the drivers/i2c/busses/i2c-designware-amdpsp.c
Acked-by: Sumit Garg <sumit.garg@linaro.org> # For TEE subsystem bits
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Sean Christopherson <seanjc@google.com> # KVM
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Expose IA32_FLUSH_CMD to the guest if the guest CPUID enumerates
support for this MSR. As with IA32_PRED_CMD, permission for
unintercepted writes to this MSR will be granted to the guest after
the first non-zero write.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20230201132905.549148-3-eesposit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
WARN if generating a GATag given a VM ID and vCPU ID doesn't yield the
same IDs when pulling the IDs back out of the tag. Don't bother adding
error handling to callers, this is very much a paranoid sanity check as
KVM fully controls the VM ID and is supposed to reject too-big vCPU IDs.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Tested-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <20230207002156.521736-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Define AVIC_VCPU_ID_MASK based on AVIC_PHYSICAL_MAX_INDEX, i.e. the mask
that effectively controls the largest guest physical APIC ID supported by
x2AVIC, instead of hardcoding the number of bits to 8 (and the number of
VM bits to 24).
The AVIC GATag is programmed into the AMD IOMMU IRTE to provide a
reference back to KVM in case the IOMMU cannot inject an interrupt into a
non-running vCPU. In such a case, the IOMMU notifies software by creating
a GALog entry with the corresponded GATag, and KVM then uses the GATag to
find the correct VM+vCPU to kick. Dropping bit 8 from the GATag results
in kicking the wrong vCPU when targeting vCPUs with x2APIC ID > 255.
Fixes: 4d1d7942e3 ("KVM: SVM: Introduce logic to (de)activate x2AVIC mode")
Cc: stable@vger.kernel.org
Reported-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Tested-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <20230207002156.521736-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Provide a virtual cache topology to the guest to avoid
inconsistencies with migration on heterogenous systems. Non secure
software has no practical need to traverse the caches by set/way in
the first place.
- Add support for taking stage-2 access faults in parallel. This was an
accidental omission in the original parallel faults implementation,
but should provide a marginal improvement to machines w/o FEAT_HAFDBS
(such as hardware from the fruit company).
- A preamble to adding support for nested virtualization to KVM,
including vEL2 register state, rudimentary nested exception handling
and masking unsupported features for nested guests.
- Fixes to the PSCI relay that avoid an unexpected host SVE trap when
resuming a CPU when running pKVM.
- VGIC maintenance interrupt support for the AIC
- Improvements to the arch timer emulation, primarily aimed at reducing
the trap overhead of running nested.
- Add CONFIG_USERFAULTFD to the KVM selftests config fragment in the
interest of CI systems.
- Avoid VM-wide stop-the-world operations when a vCPU accesses its own
redistributor.
- Serialize when toggling CPACR_EL1.SMEN to avoid unexpected exceptions
in the host.
- Aesthetic and comment/kerneldoc fixes
- Drop the vestiges of the old Columbia mailing list and add [Oliver]
as co-maintainer
This also drags in arm64's 'for-next/sme2' branch, because both it and
the PSCI relay changes touch the EL2 initialization code.
RISC-V:
- Fix wrong usage of PGDIR_SIZE instead of PUD_SIZE
- Correctly place the guest in S-mode after redirecting a trap to the guest
- Redirect illegal instruction traps to guest
- SBI PMU support for guest
s390:
- Two patches sorting out confusion between virtual and physical
addresses, which currently are the same on s390.
- A new ioctl that performs cmpxchg on guest memory
- A few fixes
x86:
- Change tdp_mmu to a read-only parameter
- Separate TDP and shadow MMU page fault paths
- Enable Hyper-V invariant TSC control
- Fix a variety of APICv and AVIC bugs, some of them real-world,
some of them affecting architecurally legal but unlikely to
happen in practice
- Mark APIC timer as expired if its in one-shot mode and the count
underflows while the vCPU task was being migrated
- Advertise support for Intel's new fast REP string features
- Fix a double-shootdown issue in the emergency reboot code
- Ensure GIF=1 and disable SVM during an emergency reboot, i.e. give SVM
similar treatment to VMX
- Update Xen's TSC info CPUID sub-leaves as appropriate
- Add support for Hyper-V's extended hypercalls, where "support" at this
point is just forwarding the hypercalls to userspace
- Clean up the kvm->lock vs. kvm->srcu sequences when updating the PMU and
MSR filters
- One-off fixes and cleanups
- Fix and cleanup the range-based TLB flushing code, used when KVM is
running on Hyper-V
- Add support for filtering PMU events using a mask. If userspace
wants to restrict heavily what events the guest can use, it can now
do so without needing an absurd number of filter entries
- Clean up KVM's handling of "PMU MSRs to save", especially when vPMU
support is disabled
- Add PEBS support for Intel Sapphire Rapids
- Fix a mostly benign overflow bug in SEV's send|receive_update_data()
- Move several SVM-specific flags into vcpu_svm
x86 Intel:
- Handle NMI VM-Exits before leaving the noinstr region
- A few trivial cleanups in the VM-Enter flows
- Stop enabling VMFUNC for L1 purely to document that KVM doesn't support
EPTP switching (or any other VM function) for L1
- Fix a crash when using eVMCS's enlighted MSR bitmaps
Generic:
- Clean up the hardware enable and initialization flow, which was
scattered around multiple arch-specific hooks. Instead, just
let the arch code call into generic code. Both x86 and ARM should
benefit from not having to fight common KVM code's notion of how
to do initialization.
- Account allocations in generic kvm_arch_alloc_vm()
- Fix a memory leak if coalesced MMIO unregistration fails
selftests:
- On x86, cache the CPU vendor (AMD vs. Intel) and use the info to emit
the correct hypercall instruction instead of relying on KVM to patch
in VMMCALL
- Use TAP interface for kvm_binary_stats_test and tsc_msrs_test
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmP2YA0UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPg/Qf+J6nT+TkIa+8Ei+fN1oMTDp4YuIOx
mXvJ9mRK9sQ+tAUVwvDz3qN/fK5mjsYbRHIDlVc5p2Q3bCrVGDDqXPFfCcLx1u+O
9U9xjkO4JxD2LS9pc70FYOyzVNeJ8VMGOBbC2b0lkdYZ4KnUc6e/WWFKJs96bK+H
duo+RIVyaMthnvbTwSv1K3qQb61n6lSJXplywS8KWFK6NZAmBiEFDAWGRYQE9lLs
VcVcG0iDJNL/BQJ5InKCcvXVGskcCm9erDszPo7w4Bypa4S9AMS42DHUaRZrBJwV
/WqdH7ckIz7+OSV0W1j+bKTHAFVTCjXYOM7wQykgjawjICzMSnnG9Gpskw==
=goe1
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- Provide a virtual cache topology to the guest to avoid
inconsistencies with migration on heterogenous systems. Non secure
software has no practical need to traverse the caches by set/way in
the first place
- Add support for taking stage-2 access faults in parallel. This was
an accidental omission in the original parallel faults
implementation, but should provide a marginal improvement to
machines w/o FEAT_HAFDBS (such as hardware from the fruit company)
- A preamble to adding support for nested virtualization to KVM,
including vEL2 register state, rudimentary nested exception
handling and masking unsupported features for nested guests
- Fixes to the PSCI relay that avoid an unexpected host SVE trap when
resuming a CPU when running pKVM
- VGIC maintenance interrupt support for the AIC
- Improvements to the arch timer emulation, primarily aimed at
reducing the trap overhead of running nested
- Add CONFIG_USERFAULTFD to the KVM selftests config fragment in the
interest of CI systems
- Avoid VM-wide stop-the-world operations when a vCPU accesses its
own redistributor
- Serialize when toggling CPACR_EL1.SMEN to avoid unexpected
exceptions in the host
- Aesthetic and comment/kerneldoc fixes
- Drop the vestiges of the old Columbia mailing list and add [Oliver]
as co-maintainer
RISC-V:
- Fix wrong usage of PGDIR_SIZE instead of PUD_SIZE
- Correctly place the guest in S-mode after redirecting a trap to the
guest
- Redirect illegal instruction traps to guest
- SBI PMU support for guest
s390:
- Sort out confusion between virtual and physical addresses, which
currently are the same on s390
- A new ioctl that performs cmpxchg on guest memory
- A few fixes
x86:
- Change tdp_mmu to a read-only parameter
- Separate TDP and shadow MMU page fault paths
- Enable Hyper-V invariant TSC control
- Fix a variety of APICv and AVIC bugs, some of them real-world, some
of them affecting architecurally legal but unlikely to happen in
practice
- Mark APIC timer as expired if its in one-shot mode and the count
underflows while the vCPU task was being migrated
- Advertise support for Intel's new fast REP string features
- Fix a double-shootdown issue in the emergency reboot code
- Ensure GIF=1 and disable SVM during an emergency reboot, i.e. give
SVM similar treatment to VMX
- Update Xen's TSC info CPUID sub-leaves as appropriate
- Add support for Hyper-V's extended hypercalls, where "support" at
this point is just forwarding the hypercalls to userspace
- Clean up the kvm->lock vs. kvm->srcu sequences when updating the
PMU and MSR filters
- One-off fixes and cleanups
- Fix and cleanup the range-based TLB flushing code, used when KVM is
running on Hyper-V
- Add support for filtering PMU events using a mask. If userspace
wants to restrict heavily what events the guest can use, it can now
do so without needing an absurd number of filter entries
- Clean up KVM's handling of "PMU MSRs to save", especially when vPMU
support is disabled
- Add PEBS support for Intel Sapphire Rapids
- Fix a mostly benign overflow bug in SEV's
send|receive_update_data()
- Move several SVM-specific flags into vcpu_svm
x86 Intel:
- Handle NMI VM-Exits before leaving the noinstr region
- A few trivial cleanups in the VM-Enter flows
- Stop enabling VMFUNC for L1 purely to document that KVM doesn't
support EPTP switching (or any other VM function) for L1
- Fix a crash when using eVMCS's enlighted MSR bitmaps
Generic:
- Clean up the hardware enable and initialization flow, which was
scattered around multiple arch-specific hooks. Instead, just let
the arch code call into generic code. Both x86 and ARM should
benefit from not having to fight common KVM code's notion of how to
do initialization
- Account allocations in generic kvm_arch_alloc_vm()
- Fix a memory leak if coalesced MMIO unregistration fails
selftests:
- On x86, cache the CPU vendor (AMD vs. Intel) and use the info to
emit the correct hypercall instruction instead of relying on KVM to
patch in VMMCALL
- Use TAP interface for kvm_binary_stats_test and tsc_msrs_test"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (325 commits)
KVM: SVM: hyper-v: placate modpost section mismatch error
KVM: x86/mmu: Make tdp_mmu_allowed static
KVM: arm64: nv: Use reg_to_encoding() to get sysreg ID
KVM: arm64: nv: Only toggle cache for virtual EL2 when SCTLR_EL2 changes
KVM: arm64: nv: Filter out unsupported features from ID regs
KVM: arm64: nv: Emulate EL12 register accesses from the virtual EL2
KVM: arm64: nv: Allow a sysreg to be hidden from userspace only
KVM: arm64: nv: Emulate PSTATE.M for a guest hypervisor
KVM: arm64: nv: Add accessors for SPSR_EL1, ELR_EL1 and VBAR_EL1 from virtual EL2
KVM: arm64: nv: Handle SMCs taken from virtual EL2
KVM: arm64: nv: Handle trapped ERET from virtual EL2
KVM: arm64: nv: Inject HVC exceptions to the virtual EL2
KVM: arm64: nv: Support virtual EL2 exceptions
KVM: arm64: nv: Handle HCR_EL2.NV system register traps
KVM: arm64: nv: Add nested virt VCPU primitives for vEL2 VCPU state
KVM: arm64: nv: Add EL2 system registers to vcpu context
KVM: arm64: nv: Allow userspace to set PSR_MODE_EL2x
KVM: arm64: nv: Reset VCPU to EL2 registers if VCPU nested virt is set
KVM: arm64: nv: Introduce nested virtualization VCPU feature
KVM: arm64: Use the S2 MMU context to iterate over S2 table
...
modpost reports section mismatch errors/warnings:
WARNING: modpost: vmlinux.o: section mismatch in reference: svm_hv_hardware_setup (section: .text) -> (unknown) (section: .init.data)
WARNING: modpost: vmlinux.o: section mismatch in reference: svm_hv_hardware_setup (section: .text) -> (unknown) (section: .init.data)
WARNING: modpost: vmlinux.o: section mismatch in reference: svm_hv_hardware_setup (section: .text) -> (unknown) (section: .init.data)
This "(unknown) (section: .init.data)" all refer to svm_x86_ops.
Tag svm_hv_hardware_setup() with __init to fix a modpost warning as the
non-stub implementation accesses __initdata (svm_x86_ops), i.e. would
generate a use-after-free if svm_hv_hardware_setup() were actually invoked
post-init. The helper is only called from svm_hardware_setup(), which is
also __init, i.e. lack of __init is benign other than the modpost warning.
Fixes: 1e0c7d4075 ("KVM: SVM: hyper-v: Remote TLB flush for SVM")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Vineeth Pillai <viremana@linux.microsoft.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: kvm@vger.kernel.org
Cc: stable@vger.kernel.org
Reviewed-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20230222073315.9081-1-rdunlap@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
where possible, when supporting a debug registers swap feature for
SEV-ES guests
- Add support for AMD's version of eIBRS called Automatic IBRS which is
a set-and-forget control of indirect branch restriction speculation
resources on privilege change
- Add support for a new x86 instruction - LKGS - Load kernel GS which is
part of the FRED infrastructure
- Reset SPEC_CTRL upon init to accomodate use cases like kexec which
rediscover
- Other smaller fixes and cleanups
-----BEGIN PGP SIGNATURE-----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=v/ZC
-----END PGP SIGNATURE-----
Merge tag 'x86_cpu_for_v6.3_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpuid updates from Borislav Petkov:
- Cache the AMD debug registers in per-CPU variables to avoid MSR
writes where possible, when supporting a debug registers swap feature
for SEV-ES guests
- Add support for AMD's version of eIBRS called Automatic IBRS which is
a set-and-forget control of indirect branch restriction speculation
resources on privilege change
- Add support for a new x86 instruction - LKGS - Load kernel GS which
is part of the FRED infrastructure
- Reset SPEC_CTRL upon init to accomodate use cases like kexec which
rediscover
- Other smaller fixes and cleanups
* tag 'x86_cpu_for_v6.3_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/amd: Cache debug register values in percpu variables
KVM: x86: Propagate the AMD Automatic IBRS feature to the guest
x86/cpu: Support AMD Automatic IBRS
x86/cpu, kvm: Add the SMM_CTL MSR not present feature
x86/cpu, kvm: Add the Null Selector Clears Base feature
x86/cpu, kvm: Move X86_FEATURE_LFENCE_RDTSC to its native leaf
x86/cpu, kvm: Add the NO_NESTED_DATA_BP feature
KVM: x86: Move open-coded CPUID leaf 0x80000021 EAX bit propagation code
x86/cpu, kvm: Add support for CPUID_80000021_EAX
x86/gsseg: Add the new <asm/gsseg.h> header to <asm/asm-prototypes.h>
x86/gsseg: Use the LKGS instruction if available for load_gs_index()
x86/gsseg: Move load_gs_index() to its own new header file
x86/gsseg: Make asm_load_gs_index() take an u16
x86/opcode: Add the LKGS instruction to x86-opcode-map
x86/cpufeature: Add the CPU feature bit for LKGS
x86/bugs: Reset speculation control settings on init
x86/cpu: Remove redundant extern x86_read_arch_cap_msr()
- Fix a mostly benign overflow bug in SEV's send|receive_update_data()
- Move the SVM-specific "host flags" into vcpu_svm (extracted from the
vNMI enabling series)
- A handful for fixes and cleanups
-----BEGIN PGP SIGNATURE-----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=AVpx
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-svm-6.3' of https://github.com/kvm-x86/linux into HEAD
KVM SVM changes for 6.3:
- Fix a mostly benign overflow bug in SEV's send|receive_update_data()
- Move the SVM-specific "host flags" into vcpu_svm (extracted from the
vNMI enabling series)
- A handful for fixes and cleanups
KVM_SEV_SEND_UPDATE_DATA and KVM_SEV_RECEIVE_UPDATE_DATA have an integer
overflow issue. Params.guest_len and offset are both 32 bits wide, with a
large params.guest_len the check to confirm a page boundary is not
crossed can falsely pass:
/* Check if we are crossing the page boundary *
offset = params.guest_uaddr & (PAGE_SIZE - 1);
if ((params.guest_len + offset > PAGE_SIZE))
Add an additional check to confirm that params.guest_len itself is not
greater than PAGE_SIZE.
Note, this isn't a security concern as overflow can happen if and only if
params.guest_len is greater than 0xfffff000, and the FW spec says these
commands fail with lengths greater than 16KB, i.e. the PSP will detect
KVM's goof.
Fixes: 15fb7de1a7 ("KVM: SVM: Add KVM_SEV_RECEIVE_UPDATE_DATA command")
Fixes: d3d1af85e2 ("KVM: SVM: Add KVM_SEND_UPDATE_DATA command")
Reported-by: Andy Nguyen <theflow@google.com>
Suggested-by: Thomas Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Peter Gonda <pgonda@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: kvm@vger.kernel.org
Cc: stable@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20230207171354.4012821-1-pgonda@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Move HF_NMI_MASK and HF_IRET_MASK (a.k.a. "waiting for IRET") out of the
common "hflags" and into dedicated flags in "struct vcpu_svm". The flags
are used only for the SVM and thus should not be in hflags.
Tracking NMI masking in software isn't SVM specific, e.g. VMX has a
similar flag (soft_vnmi_blocked), but that's much more of a hack as VMX
can't intercept IRET, is useful only for ancient CPUs, i.e. will
hopefully be removed at some point, and again the exact behavior is
vendor specific and shouldn't ever be referenced in common code.
converting VMX
No functional change is intended.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Tested-by: Santosh Shukla <Santosh.Shukla@amd.com>
Link: https://lore.kernel.org/r/20221129193717.513824-5-mlevitsk@redhat.com
[sean: split from HF_GIF_MASK patch]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Move HF_GIF_MASK out of the common "hflags" and into vcpu_svm.guest_gif.
GIF is an SVM-only concept and has should never be consulted outside of
SVM-specific code.
No functional change is intended.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Tested-by: Santosh Shukla <Santosh.Shukla@amd.com>
Link: https://lore.kernel.org/r/20221129193717.513824-5-mlevitsk@redhat.com
[sean: split to separate patch]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Don't sync the TLB control field from vmcb02 to vmcs12 on nested VM-Exit.
Per AMD's APM, the field is not modified by hardware:
The VMRUN instruction reads, but does not change, the value of the
TLB_CONTROL field
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Tested-by: Santosh Shukla <Santosh.Shukla@amd.com>
Link: https://lore.kernel.org/r/20221129193717.513824-2-mlevitsk@redhat.com
[sean: massage changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add helpers to print unimplemented MSR accesses and condition all such
prints on report_ignored_msrs, i.e. honor userspace's request to not
print unimplemented MSRs. Even though vcpu_unimpl() is ratelimited,
printing can still be problematic, e.g. if a print gets stalled when host
userspace is writing MSRs during live migration, an effective stall can
result in very noticeable disruption in the guest.
E.g. the profile below was taken while calling KVM_SET_MSRS on the PMU
counters while the PMU was disabled in KVM.
- 99.75% 0.00% [.] __ioctl
- __ioctl
- 99.74% entry_SYSCALL_64_after_hwframe
do_syscall_64
sys_ioctl
- do_vfs_ioctl
- 92.48% kvm_vcpu_ioctl
- kvm_arch_vcpu_ioctl
- 85.12% kvm_set_msr_ignored_check
svm_set_msr
kvm_set_msr_common
printk
vprintk_func
vprintk_default
vprintk_emit
console_unlock
call_console_drivers
univ8250_console_write
serial8250_console_write
uart_console_write
Reported-by: Aaron Lewis <aaronlewis@google.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20230124234905.3774678-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Limit kvm_pmu_cap.num_counters_gp during kvm_init_pmu_capability() based
on the vendor PMU capabilities so that consuming num_counters_gp naturally
does the right thing. This fixes a mostly theoretical bug where KVM could
over-report its PMU support in KVM_GET_SUPPORTED_CPUID for leaf 0xA, e.g.
if the number of counters reported by perf is greater than KVM's
hardcoded internal limit. Incorporating input from the AMD PMU also
avoids over-reporting MSRs to save when running on AMD.
Link: https://lore.kernel.org/r/20230124234905.3774678-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add the AMD Automatic IBRS feature bit to those being propagated to the guest,
and enable the guest EFER bit.
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20230124163319.2277355-9-kim.phillips@amd.com
Account the temp/scratch allocation used to decrypt unaligned debug
accesses to SEV guest memory, the allocation is very much tied to the
target VM.
Reported-by: Mingwei Zhang <mizhang@google.com>
Signed-off-by: Anish Ghulati <aghulati@google.com>
Link: https://lore.kernel.org/r/20230113220923.2834699-1-aghulati@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Even in commit 4bdec12aa8 ("KVM: SVM: Detect X2APIC virtualization
(x2AVIC) support"), where avic_hardware_setup() was first introduced,
its only pass-in parameter "struct kvm_x86_ops *ops" is not used at all.
Clean it up a bit to avoid compiler ranting from LLVM toolchain.
Signed-off-by: Like Xu <likexu@tencent.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221109115952.92816-1-likexu@tencent.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Return value from svm_nmi_blocked() directly instead of taking
this in another redundant variable.
Signed-off-by: zhang songyi <zhang.songyi@zte.com.cn>
Link: https://lore.kernel.org/r/202211282003389362484@zte.com.cn
Signed-off-by: Sean Christopherson <seanjc@google.com>
When checking if a pmu event the guest is attempting to program should
be filtered, only consider the event select + unit mask in that
decision. Use an architecture specific mask to mask out all other bits,
including bits 35:32 on Intel. Those bits are not part of the event
select and should not be considered in that decision.
Fixes: 66bb8a065f ("KVM: x86: PMU Event Filter")
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Link: https://lore.kernel.org/r/20221220161236.555143-2-aaronlewis@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
The first half or so patches fix semi-urgent, real-world relevant APICv
and AVIC bugs.
The second half fixes a variety of AVIC and optimized APIC map bugs
where KVM doesn't play nice with various edge cases that are
architecturally legal(ish), but are unlikely to occur in most real world
scenarios
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
ARM:
* Fix the PMCR_EL0 reset value after the PMU rework
* Correctly handle S2 fault triggered by a S1 page table walk
by not always classifying it as a write, as this breaks on
R/O memslots
* Document why we cannot exit with KVM_EXIT_MMIO when taking
a write fault from a S1 PTW on a R/O memslot
* Put the Apple M2 on the naughty list for not being able to
correctly implement the vgic SEIS feature, just like the M1
before it
* Reviewer updates: Alex is stepping down, replaced by Zenghui
x86:
* Fix various rare locking issues in Xen emulation and teach lockdep
to detect them
* Documentation improvements
* Do not return host topology information from KVM_GET_SUPPORTED_CPUID
Track the per-vendor required APICv inhibits with a variable instead of
calling into vendor code every time KVM wants to query the set of
required inhibits. The required inhibits are a property of the vendor's
virtualization architecture, i.e. are 100% static.
Using a variable allows the compiler to inline the check, e.g. generate
a single-uop TEST+Jcc, and thus eliminates any desire to avoid checking
inhibits for performance reasons.
No functional change intended.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230106011306.85230-32-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Turns out that some warnings exist for good reasons. Restore the warning
in avic_vcpu_load() that guards against calling avic_vcpu_load() on a
running vCPU now that KVM avoids doing so when switching between x2APIC
and xAPIC. The entire point of the WARN is to highlight that KVM should
not be reloading an AVIC.
Opportunistically convert the WARN_ON() to WARN_ON_ONCE() to avoid
spamming the kernel if it does fire.
This reverts commit c0caeee65a.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230106011306.85230-31-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop writes to APIC_RRR, a.k.a. Remote Read Data Register, on AVIC
unaccelerated write traps. The register is read-only and isn't emulated
by KVM. Sending the register through kvm_apic_write_nodecode() will
result in screaming when x2APIC is enabled due to the unexpected failure
to retrieve the MSR (KVM expects that only "legal" accesses will trap).
Fixes: 4d1d7942e3 ("KVM: SVM: Introduce logic to (de)activate x2AVIC mode")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20230106011306.85230-30-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Iterate over all target logical IDs in the AVIC kick fastpath instead of
bailing if there is more than one target. Now that KVM inhibits AVIC if
vCPUs aren't mapped 1:1 with logical IDs, each bit in the destination is
guaranteed to match to at most one vCPU, i.e. iterating over the bitmap
is guaranteed to kick each valid target exactly once.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230106011306.85230-29-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do not modify AVIC's logical ID table if the logical ID portion of the
LDR is not a power-of-2, i.e. if the LDR has multiple bits set. Taking
only the first bit means that KVM will fail to match MDAs that intersect
with "higher" bits in the "ID"
The "ID" acts as a bitmap, but is referred to as an ID because there's an
implicit, unenforced "requirement" that software only set one bit. This
edge case is arguably out-of-spec behavior, but KVM cleanly handles it
in all other cases, e.g. the optimized logical map (and AVIC!) is also
disabled in this scenario.
Refactor the code to consolidate the checks, and so that the code looks
more like avic_kick_target_vcpus_fast().
Fixes: 18f40c53e1 ("svm: Add VMEXIT handlers for AVIC")
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230106011306.85230-28-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Update SVM's cache of the LDR even if the new value is "bad". Leaving
stale information in the cache can result in KVM missing updates and/or
invalidating the wrong entry, e.g. if avic_invalidate_logical_id_entry()
is triggered after a different vCPU has "claimed" the old LDR.
Fixes: 18f40c53e1 ("svm: Add VMEXIT handlers for AVIC")
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230106011306.85230-27-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Update the vCPU's local (virtual) APIC on LDR writes even if the write
"fails". The APIC needs to recalc the optimized logical map even if the
LDR is invalid or zero, e.g. if the guest clears its LDR, the optimized
map will be left as is and the vCPU will receive interrupts using its
old LDR.
Fixes: 18f40c53e1 ("svm: Add VMEXIT handlers for AVIC")
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230106011306.85230-26-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Inhibit SVM's AVIC if multiple vCPUs are aliased to the same logical ID.
Architecturally, all CPUs whose logical ID matches the MDA are supposed
to receive the interrupt; overwriting existing entries in AVIC's
logical=>physical map can result in missed IPIs.
Fixes: 18f40c53e1 ("svm: Add VMEXIT handlers for AVIC")
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230106011306.85230-25-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Inhibit APICv/AVIC if the optimized physical map is disabled so that KVM
KVM provides consistent APIC behavior if xAPIC IDs are aliased due to
vcpu_id being truncated and the x2APIC hotplug hack isn't enabled. If
the hotplug hack is disabled, events that are emulated by KVM will follow
architectural behavior (all matching vCPUs receive events, even if the
"match" is due to truncation), whereas APICv and AVIC will deliver events
only to the first matching vCPU, i.e. the vCPU that matches without
truncation.
Note, the "extra" inhibit is needed because KVM deliberately ignores
mismatches due to truncation when applying the APIC_ID_MODIFIED inhibit
so that large VMs (>255 vCPUs) can run with APICv/AVIC.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230106011306.85230-24-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a helper to perform the final kick, two instances of the ICR decoding
is one too many.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20230106011306.85230-17-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Document that AVIC is inhibited if any vCPU's APIC ID diverges from its
vCPU ID, i.e. that there's no need to check for a destination match in
the AVIC kick fast path.
Opportunistically tweak comments to remove "guest bug", as that suggests
KVM is punting on error handling, which is not the case. Targeting a
non-existent vCPU or no vCPUs _may_ be a guest software bug, but whether
or not it's a guest bug is irrelevant. Such behavior is architecturally
legal and thus needs to faithfully emulated by KVM (and it is).
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20230106011306.85230-16-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Due to a likely mismerge of patches, KVM ended up with a superfluous
commit to "enable" AVIC's fast path for x2AVIC mode. Even worse, the
superfluous commit has several bugs and creates a nasty local shadow
variable.
Rather than fix the bugs piece-by-piece[*] to achieve the same end
result, revert the patch wholesale.
Opportunistically add a comment documenting the x2AVIC dependencies.
This reverts commit 8c9e639da4.
[*] https://lore.kernel.org/all/YxEP7ZBRIuFWhnYJ@google.com
Fixes: 8c9e639da4 ("KVM: SVM: Use target APIC ID to complete x2AVIC IRQs when possible")
Suggested-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230106011306.85230-15-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For X2APIC ID in cluster mode, the logical ID is bit [15:0].
Fixes: 603ccef42c ("KVM: x86: SVM: fix avic_kick_target_vcpus_fast")
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230106011306.85230-14-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Compute the destination from ICRH using the sender's x2APIC status, not
each (potential) target's x2APIC status.
Fixes: c514d3a348 ("KVM: SVM: Update avic_kick_target_vcpus to support 32-bit APIC ID")
Cc: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Li RongQing <lirongqing@baidu.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20230106011306.85230-13-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace the "avic_mode" enum with a single bool to track whether or not
x2AVIC is enabled. KVM already has "apicv_enabled" that tracks if any
flavor of AVIC is enabled, i.e. AVIC_MODE_NONE and AVIC_MODE_X1 are
redundant and unnecessary noise.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20230106011306.85230-12-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Free the APIC access page memslot if any vCPU enables x2APIC and SVM's
AVIC is enabled to prevent accesses to the virtual APIC on vCPUs with
x2APIC enabled. On AMD, if its "hybrid" mode is enabled (AVIC is enabled
when x2APIC is enabled even without x2AVIC support), keeping the APIC
access page memslot results in the guest being able to access the virtual
APIC page as x2APIC is fully emulated by KVM. I.e. hardware isn't aware
that the guest is operating in x2APIC mode.
Exempt nested SVM's update of APICv state from the new logic as x2APIC
can't be toggled on VM-Exit. In practice, invoking the x2APIC logic
should be harmless precisely because it should be a glorified nop, but
play it safe to avoid latent bugs, e.g. with dropping the vCPU's SRCU
lock.
Intel doesn't suffer from the same issue as APICv has fully independent
VMCS controls for xAPIC vs. x2APIC virtualization. Technically, KVM
should provide bus error semantics and not memory semantics for the APIC
page when x2APIC is enabled, but KVM already provides memory semantics in
other scenarios, e.g. if APICv/AVIC is enabled and the APIC is hardware
disabled (via APIC_BASE MSR).
Note, checking apic_access_memslot_enabled without taking locks relies
it being set during vCPU creation (before kvm_vcpu_reset()). vCPUs can
race to set the inhibit and delete the memslot, i.e. can get false
positives, but can't get false negatives as apic_access_memslot_enabled
can't be toggled "on" once any vCPU reaches KVM_RUN.
Opportunistically drop the "can" while updating avic_activate_vmcb()'s
comment, i.e. to state that KVM _does_ support the hybrid mode. Move
the "Note:" down a line to conform to preferred kernel/KVM multi-line
comment style.
Opportunistically update the apicv_update_lock comment, as it isn't
actually used to protect apic_access_memslot_enabled (which is protected
by slots_lock).
Fixes: 0e311d33bf ("KVM: SVM: Introduce hybrid-AVIC mode")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20230106011306.85230-11-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the APIC access page allocation helper function to common x86 code,
the allocation routine is virtually identical between APICv (VMX) and
AVIC (SVM). Keep APICv's gfn_to_page() + put_page() sequence, which
verifies that a backing page can be allocated, i.e. that the system isn't
under heavy memory pressure. Forcing the backing page to be populated
isn't strictly necessary, but skipping the effective prefetch only delays
the inevitable.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230106011306.85230-10-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the VMCB updates from avic_refresh_apicv_exec_ctrl() into
avic_set_virtual_apic_mode() and invert the dependency being said
functions to avoid calling avic_vcpu_{load,put}() and
avic_set_pi_irte_mode() when "only" setting the virtual APIC mode.
avic_set_virtual_apic_mode() is invoked from common x86 with preemption
enabled, which makes avic_vcpu_{load,put}() unhappy. Luckily, calling
those and updating IRTE stuff is unnecessary as the only reason
avic_set_virtual_apic_mode() is called is to handle transitions between
xAPIC and x2APIC that don't also toggle APICv activation. And if
activation doesn't change, there's no need to fiddle with the physical
APIC ID table or update IRTE.
The "full" refresh is guaranteed to be called if activation changes in
this case as the only call to the "set" path is:
kvm_vcpu_update_apicv(vcpu);
static_call_cond(kvm_x86_set_virtual_apic_mode)(vcpu);
and kvm_vcpu_update_apicv() invokes the refresh if activation changes:
if (apic->apicv_active == activate)
goto out;
apic->apicv_active = activate;
kvm_apic_update_apicv(vcpu);
static_call(kvm_x86_refresh_apicv_exec_ctrl)(vcpu);
Rename the helper to reflect that it is also called during "refresh".
WARNING: CPU: 183 PID: 49186 at arch/x86/kvm/svm/avic.c:1081 avic_vcpu_put+0xde/0xf0 [kvm_amd]
CPU: 183 PID: 49186 Comm: stable Tainted: G O 6.0.0-smp--fcddbca45f0a-sink #34
Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 10.48.0 01/27/2022
RIP: 0010:avic_vcpu_put+0xde/0xf0 [kvm_amd]
avic_refresh_apicv_exec_ctrl+0x142/0x1c0 [kvm_amd]
avic_set_virtual_apic_mode+0x5a/0x70 [kvm_amd]
kvm_lapic_set_base+0x149/0x1a0 [kvm]
kvm_set_apic_base+0x8f/0xd0 [kvm]
kvm_set_msr_common+0xa3a/0xdc0 [kvm]
svm_set_msr+0x364/0x6b0 [kvm_amd]
__kvm_set_msr+0xb8/0x1c0 [kvm]
kvm_emulate_wrmsr+0x58/0x1d0 [kvm]
msr_interception+0x1c/0x30 [kvm_amd]
svm_invoke_exit_handler+0x31/0x100 [kvm_amd]
svm_handle_exit+0xfc/0x160 [kvm_amd]
vcpu_enter_guest+0x21bb/0x23e0 [kvm]
vcpu_run+0x92/0x450 [kvm]
kvm_arch_vcpu_ioctl_run+0x43e/0x6e0 [kvm]
kvm_vcpu_ioctl+0x559/0x620 [kvm]
Fixes: 05c4fe8c1b ("KVM: SVM: Refresh AVIC configuration when changing APIC mode")
Cc: stable@vger.kernel.org
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230106011306.85230-8-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Emulate ICR writes on AVIC IPI failures due to invalid targets using the
same logic as failures due to invalid types. AVIC acceleration fails if
_any_ of the targets are invalid, and crucially VM-Exits before sending
IPIs to targets that _are_ valid. In logical mode, the destination is a
bitmap, i.e. a single IPI can target multiple logical IDs. Doing nothing
causes KVM to drop IPIs if at least one target is valid and at least one
target is invalid.
Fixes: 18f40c53e1 ("svm: Add VMEXIT handlers for AVIC")
Cc: stable@vger.kernel.org
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230106011306.85230-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Flush the TLB when activating AVIC as the CPU can insert into the TLB
while AVIC is "locally" disabled. KVM doesn't treat "APIC hardware
disabled" as VM-wide AVIC inhibition, and so when a vCPU has its APIC
hardware disabled, AVIC is not guaranteed to be inhibited. As a result,
KVM may create a valid NPT mapping for the APIC base, which the CPU can
cache as a non-AVIC translation.
Note, Intel handles this in vmx_set_virtual_apic_mode().
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20230106011306.85230-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The mysterious comment "We only want the cr8 intercept bits of L1"
dates back to basically the introduction of nested SVM, back when
the handling of "less typical" hypervisors was very haphazard.
With the development of kvm-unit-tests for interrupt handling,
the same code grew another vmcb_clr_intercept for the interrupt
window (VINTR) vmexit, this time with a comment that is at least
decent.
It turns out however that the same comment applies to the CR8 write
intercept, which is also a "recheck if an interrupt should be
injected" intercept. The CR8 read intercept instead has not
been used by KVM for 14 years (commit 649d68643e, "KVM: SVM:
sync TPR value to V_TPR field in the VMCB"), so do not bother
clearing it and let one comment describe both CR8 write and VINTR
handling.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do compatibility checks when enabling hardware to effectively add
compatibility checks when onlining a CPU. Abort enabling, i.e. the
online process, if the (hotplugged) CPU is incompatible with the known
good setup.
At init time, KVM does compatibility checks to ensure that all online
CPUs support hardware virtualization and a common set of features. But
KVM uses hotplugged CPUs without such compatibility checks. On Intel
CPUs, this leads to #GP if the hotplugged CPU doesn't support VMX, or
VM-Entry failure if the hotplugged CPU doesn't support all features
enabled by KVM.
Note, this is little more than a NOP on SVM, as SVM already checks for
full SVM support during hardware enabling.
Opportunistically add a pr_err() if setup_vmcs_config() fails, and
tweak all error messages to output which CPU failed.
Signed-off-by: Chao Gao <chao.gao@intel.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Acked-by: Kai Huang <kai.huang@intel.com>
Message-Id: <20221130230934.1014142-41-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the .check_processor_compatibility() callback from kvm_x86_init_ops
to kvm_x86_ops to allow a future patch to do compatibility checks during
CPU hotplug.
Do kvm_ops_update() before compat checks so that static_call() can be
used during compat checks.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Message-Id: <20221130230934.1014142-40-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Check that SVM is supported and enabled in the processor compatibility
checks. SVM already checks for support during hardware enabling,
i.e. this doesn't really add new functionality. The net effect is that
KVM will refuse to load if a CPU doesn't have SVM fully enabled, as
opposed to failing KVM_CREATE_VM.
Opportunistically move svm_check_processor_compat() up in svm.c so that
it can be invoked during hardware enabling in a future patch.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221130230934.1014142-39-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do basic VMX/SVM support checks directly in vendor code instead of
implementing them via kvm_x86_ops hooks. Beyond the superficial benefit
of providing common messages, which isn't even clearly a net positive
since vendor code can provide more precise/detailed messages, there's
zero advantage to bouncing through common x86 code.
Consolidating the checks will also simplify performing the checks
across all CPUs (in a future patch).
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221130230934.1014142-37-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Define pr_fmt using KBUILD_MODNAME for all KVM x86 code so that printks
use consistent formatting across common x86, Intel, and AMD code. In
addition to providing consistent print formatting, using KBUILD_MODNAME,
e.g. kvm_amd and kvm_intel, allows referencing SVM and VMX (and SEV and
SGX and ...) as technologies without generating weird messages, and
without causing naming conflicts with other kernel code, e.g. "SEV: ",
"tdx: ", "sgx: " etc.. are all used by the kernel for non-KVM subsystems.
Opportunistically move away from printk() for prints that need to be
modified anyways, e.g. to drop a manual "kvm: " prefix.
Opportunistically convert a few SGX WARNs that are similarly modified to
WARN_ONCE; in the very unlikely event that the WARNs fire, odds are good
that they would fire repeatedly and spam the kernel log without providing
unique information in each print.
Note, defining pr_fmt yields undesirable results for code that uses KVM's
printk wrappers, e.g. vcpu_unimpl(). But, that's a pre-existing problem
as SVM/kvm_amd already defines a pr_fmt, and thankfully use of KVM's
wrappers is relatively limited in KVM x86 code.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-Id: <20221130230934.1014142-35-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use KBUILD_MODNAME to specify the vendor module name instead of manually
writing out the name to make it a bit more obvious that the name isn't
completely arbitrary. A future patch will also use KBUILD_MODNAME to
define pr_fmt, at which point using KBUILD_MODNAME for kvm_x86_ops.name
further reinforces the intended usage of kvm_x86_ops.name.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221130230934.1014142-34-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop kvm_arch_check_processor_compat() and its support code now that all
architecture implementations are nops.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Eric Farman <farman@linux.ibm.com> # s390
Acked-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Message-Id: <20221130230934.1014142-33-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the CPU compatibility checks to pure x86 code, i.e. drop x86's use
of the common kvm_x86_check_cpu_compat() arch hook. x86 is the only
architecture that "needs" to do per-CPU compatibility checks, moving
the logic to x86 will allow dropping the common code, and will also
give x86 more control over when/how the compatibility checks are
performed, e.g. TDX will need to enable hardware (do VMXON) in order to
perform compatibility checks.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Isaku Yamahata <isaku.yamahata@intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Message-Id: <20221130230934.1014142-32-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the guts of kvm_arch_init() to a new helper, kvm_x86_vendor_init(),
so that VMX can do _all_ arch and vendor initialization before calling
kvm_init(). Calling kvm_init() must be the _very_ last step during init,
as kvm_init() exposes /dev/kvm to userspace, i.e. allows creating VMs.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221130230934.1014142-14-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Enable the per-vcpu dirty-ring tracking mechanism, together with an
option to keep the good old dirty log around for pages that are
dirtied by something other than a vcpu.
* Switch to the relaxed parallel fault handling, using RCU to delay
page table reclaim and giving better performance under load.
* Relax the MTE ABI, allowing a VMM to use the MAP_SHARED mapping option,
which multi-process VMMs such as crosvm rely on (see merge commit 382b5b87a9:
"Fix a number of issues with MTE, such as races on the tags being
initialised vs the PG_mte_tagged flag as well as the lack of support
for VM_SHARED when KVM is involved. Patches from Catalin Marinas and
Peter Collingbourne").
* Merge the pKVM shadow vcpu state tracking that allows the hypervisor
to have its own view of a vcpu, keeping that state private.
* Add support for the PMUv3p5 architecture revision, bringing support
for 64bit counters on systems that support it, and fix the
no-quite-compliant CHAIN-ed counter support for the machines that
actually exist out there.
* Fix a handful of minor issues around 52bit VA/PA support (64kB pages
only) as a prefix of the oncoming support for 4kB and 16kB pages.
* Pick a small set of documentation and spelling fixes, because no
good merge window would be complete without those.
s390:
* Second batch of the lazy destroy patches
* First batch of KVM changes for kernel virtual != physical address support
* Removal of a unused function
x86:
* Allow compiling out SMM support
* Cleanup and documentation of SMM state save area format
* Preserve interrupt shadow in SMM state save area
* Respond to generic signals during slow page faults
* Fixes and optimizations for the non-executable huge page errata fix.
* Reprogram all performance counters on PMU filter change
* Cleanups to Hyper-V emulation and tests
* Process Hyper-V TLB flushes from a nested guest (i.e. from a L2 guest
running on top of a L1 Hyper-V hypervisor)
* Advertise several new Intel features
* x86 Xen-for-KVM:
** Allow the Xen runstate information to cross a page boundary
** Allow XEN_RUNSTATE_UPDATE flag behaviour to be configured
** Add support for 32-bit guests in SCHEDOP_poll
* Notable x86 fixes and cleanups:
** One-off fixes for various emulation flows (SGX, VMXON, NRIPS=0).
** Reinstate IBPB on emulated VM-Exit that was incorrectly dropped a few
years back when eliminating unnecessary barriers when switching between
vmcs01 and vmcs02.
** Clean up vmread_error_trampoline() to make it more obvious that params
must be passed on the stack, even for x86-64.
** Let userspace set all supported bits in MSR_IA32_FEAT_CTL irrespective
of the current guest CPUID.
** Fudge around a race with TSC refinement that results in KVM incorrectly
thinking a guest needs TSC scaling when running on a CPU with a
constant TSC, but no hardware-enumerated TSC frequency.
** Advertise (on AMD) that the SMM_CTL MSR is not supported
** Remove unnecessary exports
Generic:
* Support for responding to signals during page faults; introduces
new FOLL_INTERRUPTIBLE flag that was reviewed by mm folks
Selftests:
* Fix an inverted check in the access tracking perf test, and restore
support for asserting that there aren't too many idle pages when
running on bare metal.
* Fix build errors that occur in certain setups (unsure exactly what is
unique about the problematic setup) due to glibc overriding
static_assert() to a variant that requires a custom message.
* Introduce actual atomics for clear/set_bit() in selftests
* Add support for pinning vCPUs in dirty_log_perf_test.
* Rename the so called "perf_util" framework to "memstress".
* Add a lightweight psuedo RNG for guest use, and use it to randomize
the access pattern and write vs. read percentage in the memstress tests.
* Add a common ucall implementation; code dedup and pre-work for running
SEV (and beyond) guests in selftests.
* Provide a common constructor and arch hook, which will eventually be
used by x86 to automatically select the right hypercall (AMD vs. Intel).
* A bunch of added/enabled/fixed selftests for ARM64, covering memslots,
breakpoints, stage-2 faults and access tracking.
* x86-specific selftest changes:
** Clean up x86's page table management.
** Clean up and enhance the "smaller maxphyaddr" test, and add a related
test to cover generic emulation failure.
** Clean up the nEPT support checks.
** Add X86_PROPERTY_* framework to retrieve multi-bit CPUID values.
** Fix an ordering issue in the AMX test introduced by recent conversions
to use kvm_cpu_has(), and harden the code to guard against similar bugs
in the future. Anything that tiggers caching of KVM's supported CPUID,
kvm_cpu_has() in this case, effectively hides opt-in XSAVE features if
the caching occurs before the test opts in via prctl().
Documentation:
* Remove deleted ioctls from documentation
* Clean up the docs for the x86 MSR filter.
* Various fixes
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmOaFrcUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPemQgAq49excg2Cc+EsHnZw3vu/QWdA0Rt
KhL3OgKxuHNjCbD2O9n2t5di7eJOTQ7F7T0eDm3xPTr4FS8LQ2327/mQePU/H2CF
mWOpq9RBWLzFsSTeVA2Mz9TUTkYSnDHYuRsBvHyw/n9cL76BWVzjImldFtjYjjex
yAwl8c5itKH6bc7KO+5ydswbvBzODkeYKUSBNdbn6m0JGQST7XppNwIAJvpiHsii
Qgpk0e4Xx9q4PXG/r5DedI6BlufBsLhv0aE9SHPzyKH3JbbUFhJYI8ZD5OhBQuYW
MwxK2KlM5Jm5ud2NZDDlsMmmvd1lnYCFDyqNozaKEWC1Y5rq1AbMa51fXA==
=QAYX
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM64:
- Enable the per-vcpu dirty-ring tracking mechanism, together with an
option to keep the good old dirty log around for pages that are
dirtied by something other than a vcpu.
- Switch to the relaxed parallel fault handling, using RCU to delay
page table reclaim and giving better performance under load.
- Relax the MTE ABI, allowing a VMM to use the MAP_SHARED mapping
option, which multi-process VMMs such as crosvm rely on (see merge
commit 382b5b87a9: "Fix a number of issues with MTE, such as
races on the tags being initialised vs the PG_mte_tagged flag as
well as the lack of support for VM_SHARED when KVM is involved.
Patches from Catalin Marinas and Peter Collingbourne").
- Merge the pKVM shadow vcpu state tracking that allows the
hypervisor to have its own view of a vcpu, keeping that state
private.
- Add support for the PMUv3p5 architecture revision, bringing support
for 64bit counters on systems that support it, and fix the
no-quite-compliant CHAIN-ed counter support for the machines that
actually exist out there.
- Fix a handful of minor issues around 52bit VA/PA support (64kB
pages only) as a prefix of the oncoming support for 4kB and 16kB
pages.
- Pick a small set of documentation and spelling fixes, because no
good merge window would be complete without those.
s390:
- Second batch of the lazy destroy patches
- First batch of KVM changes for kernel virtual != physical address
support
- Removal of a unused function
x86:
- Allow compiling out SMM support
- Cleanup and documentation of SMM state save area format
- Preserve interrupt shadow in SMM state save area
- Respond to generic signals during slow page faults
- Fixes and optimizations for the non-executable huge page errata
fix.
- Reprogram all performance counters on PMU filter change
- Cleanups to Hyper-V emulation and tests
- Process Hyper-V TLB flushes from a nested guest (i.e. from a L2
guest running on top of a L1 Hyper-V hypervisor)
- Advertise several new Intel features
- x86 Xen-for-KVM:
- Allow the Xen runstate information to cross a page boundary
- Allow XEN_RUNSTATE_UPDATE flag behaviour to be configured
- Add support for 32-bit guests in SCHEDOP_poll
- Notable x86 fixes and cleanups:
- One-off fixes for various emulation flows (SGX, VMXON, NRIPS=0).
- Reinstate IBPB on emulated VM-Exit that was incorrectly dropped
a few years back when eliminating unnecessary barriers when
switching between vmcs01 and vmcs02.
- Clean up vmread_error_trampoline() to make it more obvious that
params must be passed on the stack, even for x86-64.
- Let userspace set all supported bits in MSR_IA32_FEAT_CTL
irrespective of the current guest CPUID.
- Fudge around a race with TSC refinement that results in KVM
incorrectly thinking a guest needs TSC scaling when running on a
CPU with a constant TSC, but no hardware-enumerated TSC
frequency.
- Advertise (on AMD) that the SMM_CTL MSR is not supported
- Remove unnecessary exports
Generic:
- Support for responding to signals during page faults; introduces
new FOLL_INTERRUPTIBLE flag that was reviewed by mm folks
Selftests:
- Fix an inverted check in the access tracking perf test, and restore
support for asserting that there aren't too many idle pages when
running on bare metal.
- Fix build errors that occur in certain setups (unsure exactly what
is unique about the problematic setup) due to glibc overriding
static_assert() to a variant that requires a custom message.
- Introduce actual atomics for clear/set_bit() in selftests
- Add support for pinning vCPUs in dirty_log_perf_test.
- Rename the so called "perf_util" framework to "memstress".
- Add a lightweight psuedo RNG for guest use, and use it to randomize
the access pattern and write vs. read percentage in the memstress
tests.
- Add a common ucall implementation; code dedup and pre-work for
running SEV (and beyond) guests in selftests.
- Provide a common constructor and arch hook, which will eventually
be used by x86 to automatically select the right hypercall (AMD vs.
Intel).
- A bunch of added/enabled/fixed selftests for ARM64, covering
memslots, breakpoints, stage-2 faults and access tracking.
- x86-specific selftest changes:
- Clean up x86's page table management.
- Clean up and enhance the "smaller maxphyaddr" test, and add a
related test to cover generic emulation failure.
- Clean up the nEPT support checks.
- Add X86_PROPERTY_* framework to retrieve multi-bit CPUID values.
- Fix an ordering issue in the AMX test introduced by recent
conversions to use kvm_cpu_has(), and harden the code to guard
against similar bugs in the future. Anything that tiggers
caching of KVM's supported CPUID, kvm_cpu_has() in this case,
effectively hides opt-in XSAVE features if the caching occurs
before the test opts in via prctl().
Documentation:
- Remove deleted ioctls from documentation
- Clean up the docs for the x86 MSR filter.
- Various fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (361 commits)
KVM: x86: Add proper ReST tables for userspace MSR exits/flags
KVM: selftests: Allocate ucall pool from MEM_REGION_DATA
KVM: arm64: selftests: Align VA space allocator with TTBR0
KVM: arm64: Fix benign bug with incorrect use of VA_BITS
KVM: arm64: PMU: Fix period computation for 64bit counters with 32bit overflow
KVM: x86: Advertise that the SMM_CTL MSR is not supported
KVM: x86: remove unnecessary exports
KVM: selftests: Fix spelling mistake "probabalistic" -> "probabilistic"
tools: KVM: selftests: Convert clear/set_bit() to actual atomics
tools: Drop "atomic_" prefix from atomic test_and_set_bit()
tools: Drop conflicting non-atomic test_and_{clear,set}_bit() helpers
KVM: selftests: Use non-atomic clear/set bit helpers in KVM tests
perf tools: Use dedicated non-atomic clear/set bit helpers
tools: Take @bit as an "unsigned long" in {clear,set}_bit() helpers
KVM: arm64: selftests: Enable single-step without a "full" ucall()
KVM: x86: fix APICv/x2AVIC disabled when vm reboot by itself
KVM: Remove stale comment about KVM_REQ_UNHALT
KVM: Add missing arch for KVM_CREATE_DEVICE and KVM_{SET,GET}_DEVICE_ATTR
KVM: Reference to kvm_userspace_memory_region in doc and comments
KVM: Delete all references to removed KVM_SET_MEMORY_ALIAS ioctl
...
been long in the making. It is a lighterweight software-only fix for
Skylake-based cores where enabling IBRS is a big hammer and causes a
significant performance impact.
What it basically does is, it aligns all kernel functions to 16 bytes
boundary and adds a 16-byte padding before the function, objtool
collects all functions' locations and when the mitigation gets applied,
it patches a call accounting thunk which is used to track the call depth
of the stack at any time.
When that call depth reaches a magical, microarchitecture-specific value
for the Return Stack Buffer, the code stuffs that RSB and avoids its
underflow which could otherwise lead to the Intel variant of Retbleed.
This software-only solution brings a lot of the lost performance back,
as benchmarks suggest:
https://lore.kernel.org/all/20220915111039.092790446@infradead.org/
That page above also contains a lot more detailed explanation of the
whole mechanism
- Implement a new control flow integrity scheme called FineIBT which is
based on the software kCFI implementation and uses hardware IBT support
where present to annotate and track indirect branches using a hash to
validate them
- Other misc fixes and cleanups
-----BEGIN PGP SIGNATURE-----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=cRy1
-----END PGP SIGNATURE-----
Merge tag 'x86_core_for_v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 core updates from Borislav Petkov:
- Add the call depth tracking mitigation for Retbleed which has been
long in the making. It is a lighterweight software-only fix for
Skylake-based cores where enabling IBRS is a big hammer and causes a
significant performance impact.
What it basically does is, it aligns all kernel functions to 16 bytes
boundary and adds a 16-byte padding before the function, objtool
collects all functions' locations and when the mitigation gets
applied, it patches a call accounting thunk which is used to track
the call depth of the stack at any time.
When that call depth reaches a magical, microarchitecture-specific
value for the Return Stack Buffer, the code stuffs that RSB and
avoids its underflow which could otherwise lead to the Intel variant
of Retbleed.
This software-only solution brings a lot of the lost performance
back, as benchmarks suggest:
https://lore.kernel.org/all/20220915111039.092790446@infradead.org/
That page above also contains a lot more detailed explanation of the
whole mechanism
- Implement a new control flow integrity scheme called FineIBT which is
based on the software kCFI implementation and uses hardware IBT
support where present to annotate and track indirect branches using a
hash to validate them
- Other misc fixes and cleanups
* tag 'x86_core_for_v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (80 commits)
x86/paravirt: Use common macro for creating simple asm paravirt functions
x86/paravirt: Remove clobber bitmask from .parainstructions
x86/debug: Include percpu.h in debugreg.h to get DECLARE_PER_CPU() et al
x86/cpufeatures: Move X86_FEATURE_CALL_DEPTH from bit 18 to bit 19 of word 11, to leave space for WIP X86_FEATURE_SGX_EDECCSSA bit
x86/Kconfig: Enable kernel IBT by default
x86,pm: Force out-of-line memcpy()
objtool: Fix weak hole vs prefix symbol
objtool: Optimize elf_dirty_reloc_sym()
x86/cfi: Add boot time hash randomization
x86/cfi: Boot time selection of CFI scheme
x86/ibt: Implement FineIBT
objtool: Add --cfi to generate the .cfi_sites section
x86: Add prefix symbols for function padding
objtool: Add option to generate prefix symbols
objtool: Avoid O(bloody terrible) behaviour -- an ode to libelf
objtool: Slice up elf_create_section_symbol()
kallsyms: Revert "Take callthunks into account"
x86: Unconfuse CONFIG_ and X86_FEATURE_ namespaces
x86/retpoline: Fix crash printing warning
x86/paravirt: Fix a !PARAVIRT build warning
...
The use of kmap_atomic() is being deprecated in favor of
kmap_local_page()[1].
The main difference between atomic and local mappings is that local
mappings don't disable page faults or preemption.
There're 2 reasons we can use kmap_local_page() here:
1. SEV is 64-bit only and kmap_local_page() doesn't disable migration in
this case, but here the function clflush_cache_range() uses CLFLUSHOPT
instruction to flush, and on x86 CLFLUSHOPT is not CPU-local and flushes
the page out of the entire cache hierarchy on all CPUs (APM volume 3,
chapter 3, CLFLUSHOPT). So there's no need to disable preemption to ensure
CPU-local.
2. clflush_cache_range() doesn't need to disable pagefault and the mapping
is still valid even if sleeps. This is also true for sched out/in when
preempted.
In addition, though kmap_local_page() is a thin wrapper around
page_address() on 64-bit, kmap_local_page() should still be used here in
preference to page_address() since page_address() isn't suitable to be used
in a generic function (like sev_clflush_pages()) where the page passed in
is not easy to determine the source of allocation. Keeping the kmap* API in
place means it can be used for things other than highmem mappings[2].
Therefore, sev_clflush_pages() is a function that should use
kmap_local_page() in place of kmap_atomic().
Convert the calls of kmap_atomic() / kunmap_atomic() to kmap_local_page() /
kunmap_local().
[1]: https://lore.kernel.org/all/20220813220034.806698-1-ira.weiny@intel.com
[2]: https://lore.kernel.org/lkml/5d667258-b58b-3d28-3609-e7914c99b31b@intel.com/
Suggested-by: Dave Hansen <dave.hansen@intel.com>
Suggested-by: Ira Weiny <ira.weiny@intel.com>
Suggested-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220928092748.463631-1-zhao1.liu@linux.intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Skip the WRMSR fastpath in SVM's VM-Exit handler if the next RIP isn't
valid, e.g. because KVM is running with nrips=false. SVM must decode and
emulate to skip the WRMSR if the CPU doesn't provide the next RIP.
Getting the instruction bytes to decode the WRMSR requires reading guest
memory, which in turn means dereferencing memslots, and that isn't safe
because KVM doesn't hold SRCU when the fastpath runs.
Don't bother trying to enable the fastpath for this case, e.g. by doing
only the WRMSR and leaving the "skip" until later. NRIPS is supported on
all modern CPUs (KVM has considered making it mandatory), and the next
RIP will be valid the vast, vast majority of the time.
=============================
WARNING: suspicious RCU usage
6.0.0-smp--4e557fcd3d80-skip #13 Tainted: G O
-----------------------------
include/linux/kvm_host.h:954 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by stable/206475:
#0: ffff9d9dfebcc0f0 (&vcpu->mutex){+.+.}-{3:3}, at: kvm_vcpu_ioctl+0x8b/0x620 [kvm]
stack backtrace:
CPU: 152 PID: 206475 Comm: stable Tainted: G O 6.0.0-smp--4e557fcd3d80-skip #13
Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 10.48.0 01/27/2022
Call Trace:
<TASK>
dump_stack_lvl+0x69/0xaa
dump_stack+0x10/0x12
lockdep_rcu_suspicious+0x11e/0x130
kvm_vcpu_gfn_to_memslot+0x155/0x190 [kvm]
kvm_vcpu_gfn_to_hva_prot+0x18/0x80 [kvm]
paging64_walk_addr_generic+0x183/0x450 [kvm]
paging64_gva_to_gpa+0x63/0xd0 [kvm]
kvm_fetch_guest_virt+0x53/0xc0 [kvm]
__do_insn_fetch_bytes+0x18b/0x1c0 [kvm]
x86_decode_insn+0xf0/0xef0 [kvm]
x86_emulate_instruction+0xba/0x790 [kvm]
kvm_emulate_instruction+0x17/0x20 [kvm]
__svm_skip_emulated_instruction+0x85/0x100 [kvm_amd]
svm_skip_emulated_instruction+0x13/0x20 [kvm_amd]
handle_fastpath_set_msr_irqoff+0xae/0x180 [kvm]
svm_vcpu_run+0x4b8/0x5a0 [kvm_amd]
vcpu_enter_guest+0x16ca/0x22f0 [kvm]
kvm_arch_vcpu_ioctl_run+0x39d/0x900 [kvm]
kvm_vcpu_ioctl+0x538/0x620 [kvm]
__se_sys_ioctl+0x77/0xc0
__x64_sys_ioctl+0x1d/0x20
do_syscall_64+0x3d/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fixes: 404d5d7bff ("KVM: X86: Introduce more exit_fastpath_completion enum values")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220930234031.1732249-1-seanjc@google.com
* Fixes for Xen emulation. While nobody should be enabling it in
the kernel (the only public users of the feature are the selftests),
the bug effectively allows userspace to read arbitrary memory.
* Correctness fixes for nested hypervisors that do not intercept INIT
or SHUTDOWN on AMD; the subsequent CPU reset can cause a use-after-free
when it disables virtualization extensions. While downgrading the panic
to a WARN is quite easy, the full fix is a bit more laborious; there
are also tests. This is the bulk of the pull request.
* Fix race condition due to incorrect mmu_lock use around
make_mmu_pages_available().
Generic:
* Obey changes to the kvm.halt_poll_ns module parameter in VMs
not using KVM_CAP_HALT_POLL, restoring behavior from before
the introduction of the capability
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmODI84UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPVJwgAombWOBf549JiHGPtwejuQO20nTSj
Om9pzWQ9dR182P+ju/FdqSPXt/Lc8i+z5zSXDrV3HQ6/a3zIItA+bOAUiMFvHNAQ
w/7pEb1MzVOsEg2SXGOjZvW3WouB4Z4R0PosInYjrFrRGRAaw5iaTOZHGezE44t2
WBWk1PpdMap7J/8sjNT1ble72ig9JdSW4qeJUQ1GWxHCigI5sESCQVqF446KM0jF
gTYPGX5TqpbWiIejF0yNew9yNKMi/yO4Pz8I5j3vtopeHx24DCIqUAGaEg6ykErX
vnzYbVP7NaFrqtje49PsK6i1cu2u7uFPArj0dxo3DviQVZVHV1q6tNmI4A==
=Qgei
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"x86:
- Fixes for Xen emulation. While nobody should be enabling it in the
kernel (the only public users of the feature are the selftests),
the bug effectively allows userspace to read arbitrary memory.
- Correctness fixes for nested hypervisors that do not intercept INIT
or SHUTDOWN on AMD; the subsequent CPU reset can cause a
use-after-free when it disables virtualization extensions. While
downgrading the panic to a WARN is quite easy, the full fix is a
bit more laborious; there are also tests. This is the bulk of the
pull request.
- Fix race condition due to incorrect mmu_lock use around
make_mmu_pages_available().
Generic:
- Obey changes to the kvm.halt_poll_ns module parameter in VMs not
using KVM_CAP_HALT_POLL, restoring behavior from before the
introduction of the capability"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: Update gfn_to_pfn_cache khva when it moves within the same page
KVM: x86/xen: Only do in-kernel acceleration of hypercalls for guest CPL0
KVM: x86/xen: Validate port number in SCHEDOP_poll
KVM: x86/mmu: Fix race condition in direct_page_fault
KVM: x86: remove exit_int_info warning in svm_handle_exit
KVM: selftests: add svm part to triple_fault_test
KVM: x86: allow L1 to not intercept triple fault
kvm: selftests: add svm nested shutdown test
KVM: selftests: move idt_entry to header
KVM: x86: forcibly leave nested mode on vCPU reset
KVM: x86: add kvm_leave_nested
KVM: x86: nSVM: harden svm_free_nested against freeing vmcb02 while still in use
KVM: x86: nSVM: leave nested mode on vCPU free
KVM: Obey kvm.halt_poll_ns in VMs not using KVM_CAP_HALT_POLL
KVM: Avoid re-reading kvm->max_halt_poll_ns during halt-polling
KVM: Cap vcpu->halt_poll_ns before halting rather than after
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmN6wAgeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG0EYH/3/RO90NbrFItraN
Lzr+d3VdbGjTu8xd1M+PRTmwh3zxLpB+Jwqr0T0A2gzL9B/D+AUPUJdrCVbv9DqS
FLJAVqoeV20dNBAHSffOOLPsgCZ+Eu+LzlNN7Iqde0e8cyZICFMNktitui84Xm/i
1NgFVgz9OZ6+aieYvUj3FrFq0p8GTIaC/oybDZrxYKcO8ZzKVMJ11swRw10wwq0g
qOOECvV3w7wlQ8upQZkzFxItKFc7EexZI6R4elXeGSJJ9Hlc092dv/zsKB9dwV+k
WcwkJrZRoezYXzgGBFxUcQtzi+ethjrPjuJuM1rYLUSIcfIW/0lkaSLgRoBu8D+I
1GfXkXs=
=gt6P
-----END PGP SIGNATURE-----
Merge tag 'v6.1-rc6' into x86/core, to resolve conflicts
Resolve conflicts between these commits in arch/x86/kernel/asm-offsets.c:
# upstream:
debc5a1ec0 ("KVM: x86: use a separate asm-offsets.c file")
# retbleed work in x86/core:
5d8213864a ("x86/retbleed: Add SKL return thunk")
... and these commits in include/linux/bpf.h:
# upstram:
18acb7fac2 ("bpf: Revert ("Fix dispatcher patchable function entry to 5 bytes nop")")
# x86/core commits:
931ab63664 ("x86/ibt: Implement FineIBT")
bea75b3389 ("x86/Kconfig: Introduce function padding")
The latter two modify BPF_DISPATCHER_ATTRIBUTES(), which was removed upstream.
Conflicts:
arch/x86/kernel/asm-offsets.c
include/linux/bpf.h
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Implement Hyper-V L2 TLB flush for nSVM. The feature needs to be enabled
both in extended 'nested controls' in VMCB and VP assist page.
According to Hyper-V TLFS, synthetic vmexit to L1 is performed with
- HV_SVM_EXITCODE_ENL exit_code.
- HV_SVM_ENL_EXITCODE_TRAP_AFTER_FLUSH exit_info_1.
Note: VP assist page is cached in 'struct kvm_vcpu_hv' so
recalc_intercepts() doesn't need to read from guest's memory. KVM
needs to update the case upon each VMRUN and after svm_set_nested_state
(svm_get_nested_state_pages()) to handle the case when the guest got
migrated while L2 was running.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-29-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To allow flushing individual GVAs instead of always flushing the whole
VPID a per-vCPU structure to pass the requests is needed. Use standard
'kfifo' to queue two types of entries: individual GVA (GFN + up to 4095
following GFNs in the lower 12 bits) and 'flush all'.
The size of the fifo is arbitrarily set to '16'.
Note, kvm_hv_flush_tlb() only queues 'flush all' entries for now and
kvm_hv_vcpu_flush_tlb() doesn't actually read the fifo just resets the
queue before returning -EOPNOTSUPP (which triggers full TLB flush) so
the functional change is very small but the infrastructure is prepared
to handle individual GVA flush requests.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-10-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In preparation to implementing fine-grained Hyper-V TLB flush and
L2 TLB flush, resurrect dedicated KVM_REQ_HV_TLB_FLUSH request bit. As
KVM_REQ_TLB_FLUSH_GUEST is a stronger operation, clear KVM_REQ_HV_TLB_FLUSH
request in kvm_vcpu_flush_tlb_guest().
The flush itself is temporary handled by kvm_vcpu_flush_tlb_guest().
No functional change intended.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-9-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To make terminology between Hyper-V-on-KVM and KVM-on-Hyper-V consistent,
rename 'enable_direct_tlbflush' to 'enable_l2_tlb_flush'. The change
eliminates the use of confusing 'direct' and adds the missing underscore.
No functional change.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-6-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that KVM isn't littered with "struct hv_enlightenments" casts, rename
the struct to "hv_vmcb_enlightenments" to highlight the fact that the
struct is specifically for SVM's VMCB.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-5-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a union to provide hv_enlightenments side-by-side with the sw_reserved
bytes that Hyper-V's enlightenments overlay. Casting sw_reserved
everywhere is messy, confusing, and unnecessarily unsafe.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-4-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move Hyper-V's VMCB enlightenment definitions to the TLFS header; the
definitions come directly from the TLFS[*], not from KVM.
No functional change intended.
[*] https://learn.microsoft.com/en-us/virtualization/hyper-v-on-windows/tlfs/datatypes/hv_svm_enlightened_vmcb_fields
[vitaly: rename VMCB_HV_ -> HV_VMCB_ to match the rest of
hyperv-tlfs.h, keep svm/hyperv.h]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This fixes three issues in nested SVM:
1) in the shutdown_interception() vmexit handler we call kvm_vcpu_reset().
However, if running nested and L1 doesn't intercept shutdown, the function
resets vcpu->arch.hflags without properly leaving the nested state.
This leaves the vCPU in inconsistent state and later triggers a kernel
panic in SVM code. The same bug can likely be triggered by sending INIT
via local apic to a vCPU which runs a nested guest.
On VMX we are lucky that the issue can't happen because VMX always
intercepts triple faults, thus triple fault in L2 will always be
redirected to L1. Plus, handle_triple_fault() doesn't reset the vCPU.
INIT IPI can't happen on VMX either because INIT events are masked while
in VMX mode.
Secondarily, KVM doesn't honour SHUTDOWN intercept bit of L1 on SVM.
A normal hypervisor should always intercept SHUTDOWN, a unit test on
the other hand might want to not do so.
Finally, the guest can trigger a kernel non rate limited printk on SVM
from the guest, which is fixed as well.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It is valid to receive external interrupt and have broken IDT entry,
which will lead to #GP with exit_int_into that will contain the index of
the IDT entry (e.g any value).
Other exceptions can happen as well, like #NP or #SS
(if stack switch fails).
Thus this warning can be user triggred and has very little value.
Cc: stable@vger.kernel.org
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20221103141351.50662-10-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is SVM correctness fix - although a sane L1 would intercept
SHUTDOWN event, it doesn't have to, so we have to honour this.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20221103141351.50662-8-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
add kvm_leave_nested which wraps a call to nested_ops->leave_nested
into a function.
Cc: stable@vger.kernel.org
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20221103141351.50662-4-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make sure that KVM uses vmcb01 before freeing nested state, and warn if
that is not the case.
This is a minimal fix for CVE-2022-3344 making the kernel print a warning
instead of a kernel panic.
Cc: stable@vger.kernel.org
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20221103141351.50662-3-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If the VM was terminated while nested, we free the nested state
while the vCPU still is in nested mode.
Soon a warning will be added for this condition.
Cc: stable@vger.kernel.org
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20221103141351.50662-2-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
DE_CFG contains the LFENCE serializing bit, restore it on resume too.
This is relevant to older families due to the way how they do S3.
Unify and correct naming while at it.
Fixes: e4d0e84e49 ("x86/cpu/AMD: Make LFENCE a serializing instruction")
Reported-by: Andrew Cooper <Andrew.Cooper3@citrix.com>
Reported-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Defer reprogramming counters and handling overflow via KVM_REQ_PMU
when incrementing counters. KVM skips emulated WRMSR in the VM-Exit
fastpath, the fastpath runs with IRQs disabled, skipping instructions
can increment and reprogram counters, reprogramming counters can
sleep, and sleeping is disallowed while IRQs are disabled.
[*] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:580
[*] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 2981888, name: CPU 15/KVM
[*] preempt_count: 1, expected: 0
[*] RCU nest depth: 0, expected: 0
[*] INFO: lockdep is turned off.
[*] irq event stamp: 0
[*] hardirqs last enabled at (0): [<0000000000000000>] 0x0
[*] hardirqs last disabled at (0): [<ffffffff8121222a>] copy_process+0x146a/0x62d0
[*] softirqs last enabled at (0): [<ffffffff81212269>] copy_process+0x14a9/0x62d0
[*] softirqs last disabled at (0): [<0000000000000000>] 0x0
[*] Preemption disabled at:
[*] [<ffffffffc2063fc1>] vcpu_enter_guest+0x1001/0x3dc0 [kvm]
[*] CPU: 17 PID: 2981888 Comm: CPU 15/KVM Kdump: 5.19.0-rc1-g239111db364c-dirty #2
[*] Call Trace:
[*] <TASK>
[*] dump_stack_lvl+0x6c/0x9b
[*] __might_resched.cold+0x22e/0x297
[*] __mutex_lock+0xc0/0x23b0
[*] perf_event_ctx_lock_nested+0x18f/0x340
[*] perf_event_pause+0x1a/0x110
[*] reprogram_counter+0x2af/0x1490 [kvm]
[*] kvm_pmu_trigger_event+0x429/0x950 [kvm]
[*] kvm_skip_emulated_instruction+0x48/0x90 [kvm]
[*] handle_fastpath_set_msr_irqoff+0x349/0x3b0 [kvm]
[*] vmx_vcpu_run+0x268e/0x3b80 [kvm_intel]
[*] vcpu_enter_guest+0x1d22/0x3dc0 [kvm]
Add a field to kvm_pmc to track the previous counter value in order
to defer overflow detection to kvm_pmu_handle_event() (the counter must
be paused before handling overflow, and that may increment the counter).
Opportunistically shrink sizeof(struct kvm_pmc) a bit.
Suggested-by: Wanpeng Li <wanpengli@tencent.com>
Fixes: 9cd803d496 ("KVM: x86: Update vPMCs when retiring instructions")
Signed-off-by: Like Xu <likexu@tencent.com>
Link: https://lore.kernel.org/r/20220831085328.45489-6-likexu@tencent.com
[sean: avoid re-triggering KVM_REQ_PMU on overflow, tweak changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220923001355.3741194-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Batch reprogramming PMU counters by setting KVM_REQ_PMU and thus
deferring reprogramming kvm_pmu_handle_event() to avoid reprogramming
a counter multiple times during a single VM-Exit.
Deferring programming will also allow KVM to fix a bug where immediately
reprogramming a counter can result in sleeping (taking a mutex) while
interrupts are disabled in the VM-Exit fastpath.
Introduce kvm_pmu_request_counter_reprogam() to make it obvious that
KVM is _requesting_ a reprogram and not actually doing the reprogram.
Opportunistically refine related comments to avoid misunderstandings.
Signed-off-by: Like Xu <likexu@tencent.com>
Link: https://lore.kernel.org/r/20220831085328.45489-5-likexu@tencent.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220923001355.3741194-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When the guest CPUID doesn't have support for long mode, 32 bit SMRAM
layout is used and it has no support for preserving EFER and/or SVM
state.
Note that this isn't relevant to running 32 bit guests on VM which is
long mode capable - such VM can still run 32 bit guests in compatibility
mode.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20221025124741.228045-23-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use SMM structs in the SVM code as well, which removes the last user of
put_smstate/GET_SMSTATE so remove these macros as well.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20221025124741.228045-22-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
if kvm_vcpu_map returns non zero value, error path should be triggered
regardless of the exact returned error value.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20221025124741.228045-21-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use kvm_smram union instad of raw arrays in the common smm code.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20221025124741.228045-18-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Vendor-specific code that deals with SMI injection and saving/restoring
SMM state is not needed if CONFIG_KVM_SMM is disabled, so remove the
four callbacks smi_allowed, enter_smm, leave_smm and enable_smi_window.
The users in svm/nested.c and x86.c also have to be compiled out; the
amount of #ifdef'ed code is small and it's not worth moving it to
smm.c.
enter_smm is now used only within #ifdef CONFIG_KVM_SMM, and the stub
can therefore be removed.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220929172016.319443-7-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some users of KVM implement the UEFI variable store through a paravirtual device
that does not require the "SMM lockbox" component of edk2; allow them to
compile out system management mode, which is not a full implementation
especially in how it interacts with nested virtualization.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220929172016.319443-6-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Create a new header and source with code related to system management
mode emulation. Entry and exit will move there too; for now,
opportunistically rename put_smstate to PUT_SMSTATE while moving
it to smm.h, and adjust the SMM state saving code.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220929172016.319443-2-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename reserved fields on all structs in arch/x86/include/asm/svm.h
following their offset within the structs. Include compile time checks for
this in the same place where other BUILD_BUG_ON for the structs are.
This also solves that fields of struct sev_es_save_area are named by their
order of appearance, but right now they jump from reserved_5 to reserved_7.
Link: https://lkml.org/lkml/2022/10/22/376
Signed-off-by: Carlos Bilbao <carlos.bilbao@amd.com>
Message-Id: <20221024164448.203351-1-carlos.bilbao@amd.com>
[Use ASSERT_STRUCT_OFFSET + fix a couple wrong offsets. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Handle PERF_CAPABILITIES directly in kvm_get_msr_feature() now that the
supported value is available in kvm_caps.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221006000314.73240-8-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Track KVM's supported PERF_CAPABILITIES in kvm_caps instead of computing
the supported capabilities on the fly every time. Using kvm_caps will
also allow for future cleanups as the kvm_caps values can be used
directly in common x86 code.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Acked-by: Like Xu <likexu@tencent.com>
Message-Id: <20221006000314.73240-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The AMD PerfMonV2 specification allows for a maximum of 16 GP counters,
but currently only 6 pairs of MSRs are accepted by KVM.
While AMD64_NUM_COUNTERS_CORE is already equal to 6, increasing without
adjusting msrs_to_save_all[] could result in out-of-bounds accesses.
Therefore introduce a macro (named KVM_AMD_PMC_MAX_GENERIC) to
refer to the number of counters supported by KVM.
Signed-off-by: Like Xu <likexu@tencent.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <20220919091008.60695-3-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Explicitly print the VMSA dump at KERN_DEBUG log level, KERN_CONT uses
KERNEL_DEFAULT if the previous log line has a newline, i.e. if there's
nothing to continuing, and as a result the VMSA gets dumped when it
shouldn't.
The KERN_CONT documentation says it defaults back to KERNL_DEFAULT if the
previous log line has a newline. So switch from KERN_CONT to
print_hex_dump_debug().
Jarkko pointed this out in reference to the original patch. See:
https://lore.kernel.org/all/YuPMeWX4uuR1Tz3M@kernel.org/
print_hex_dump(KERN_DEBUG, ...) was pointed out there, but
print_hex_dump_debug() should similar.
Fixes: 6fac42f127 ("KVM: SVM: Dump Virtual Machine Save Area (VMSA) to klog")
Signed-off-by: Peter Gonda <pgonda@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Harald Hoyer <harald@profian.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: x86@kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Message-Id: <20221104142220.469452-1-pgonda@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
x86_virt_spec_ctrl only deals with the paravirtualized
MSR_IA32_VIRT_SPEC_CTRL now and does not handle MSR_IA32_SPEC_CTRL
anymore; remove the corresponding, unused argument.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Restoration of the host IA32_SPEC_CTRL value is probably too late
with respect to the return thunk training sequence.
With respect to the user/kernel boundary, AMD says, "If software chooses
to toggle STIBP (e.g., set STIBP on kernel entry, and clear it on kernel
exit), software should set STIBP to 1 before executing the return thunk
training sequence." I assume the same requirements apply to the guest/host
boundary. The return thunk training sequence is in vmenter.S, quite close
to the VM-exit. On hosts without V_SPEC_CTRL, however, the host's
IA32_SPEC_CTRL value is not restored until much later.
To avoid this, move the restoration of host SPEC_CTRL to assembly and,
for consistency, move the restoration of the guest SPEC_CTRL as well.
This is not particularly difficult, apart from some care to cover both
32- and 64-bit, and to share code between SEV-ES and normal vmentry.
Cc: stable@vger.kernel.org
Fixes: a149180fbc ("x86: Add magic AMD return-thunk")
Suggested-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allow access to the percpu area via the GS segment base, which is
needed in order to access the saved host spec_ctrl value. In linux-next
FILL_RETURN_BUFFER also needs to access percpu data.
For simplicity, the physical address of the save area is added to struct
svm_cpu_data.
Cc: stable@vger.kernel.org
Fixes: a149180fbc ("x86: Add magic AMD return-thunk")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Analyzed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It is error-prone that code after vmexit cannot access percpu data
because GSBASE has not been restored yet. It forces MSR_IA32_SPEC_CTRL
save/restore to happen very late, after the predictor untraining
sequence, and it gets in the way of return stack depth tracking
(a retbleed mitigation that is in linux-next as of 2022-11-09).
As a first step towards fixing that, move the VMCB VMSAVE/VMLOAD to
assembly, essentially undoing commit fb0c4a4fee ("KVM: SVM: move
VMLOAD/VMSAVE to C code", 2021-03-15). The reason for that commit was
that it made it simpler to use a different VMCB for VMLOAD/VMSAVE versus
VMRUN; but that is not a big hassle anymore thanks to the kvm-asm-offsets
machinery and other related cleanups.
The idea on how to number the exception tables is stolen from
a prototype patch by Peter Zijlstra.
Cc: stable@vger.kernel.org
Fixes: a149180fbc ("x86: Add magic AMD return-thunk")
Link: <https://lore.kernel.org/all/f571e404-e625-bae1-10e9-449b2eb4cbd8@citrix.com/>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The svm_data percpu variable is a pointer, but it is allocated via
svm_hardware_setup() when KVM is loaded. Unlike hardware_enable()
this means that it is never NULL for the whole lifetime of KVM, and
static allocation does not waste any memory compared to the status quo.
It is also more efficient and more easily handled from assembly code,
so do it and don't look back.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The "cpu" field of struct svm_cpu_data has been write-only since commit
4b656b1202 ("KVM: SVM: force new asid on vcpu migration", 2009-08-05).
Remove it.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The pointer to svm_cpu_data in struct vcpu_svm looks interesting from
the point of view of accessing it after vmexit, when the GSBASE is still
containing the guest value. However, despite existing since the very
first commit of drivers/kvm/svm.c (commit 6aa8b732ca, "[PATCH] kvm:
userspace interface", 2006-12-10), it was never set to anything.
Ignore the opportunity to fix a 16 year old "bug" and delete it; doing
things the "harder" way makes it possible to remove more old cruft.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Continue moving accesses to struct vcpu_svm to vmenter.S. Reducing the
number of arguments limits the chance of mistakes due to different
registers used for argument passing in 32- and 64-bit ABIs; pushing the
VMCB argument and almost immediately popping it into a different
register looks pretty weird.
32-bit ABI is not a concern for __svm_sev_es_vcpu_run() which is 64-bit
only; however, it will soon need @svm to save/restore SPEC_CTRL so stay
consistent with __svm_vcpu_run() and let them share the same prototype.
No functional change intended.
Cc: stable@vger.kernel.org
Fixes: a149180fbc ("x86: Add magic AMD return-thunk")
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
32-bit ABI uses RAX/RCX/RDX as its argument registers, so they are in
the way of instructions that hardcode their operands such as RDMSR/WRMSR
or VMLOAD/VMRUN/VMSAVE.
In preparation for moving vmload/vmsave to __svm_vcpu_run(), keep
the pointer to the struct vcpu_svm in %rdi. In particular, it is now
possible to load svm->vmcb01.pa in %rax without clobbering the struct
vcpu_svm pointer.
No functional change intended.
Cc: stable@vger.kernel.org
Fixes: a149180fbc ("x86: Add magic AMD return-thunk")
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since registers are reachable through vcpu_svm, and we will
need to access more fields of that struct, pass it instead
of the regs[] array.
No functional change intended.
Cc: stable@vger.kernel.org
Fixes: a149180fbc ("x86: Add magic AMD return-thunk")
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To address the Intel SKL RSB underflow issue in software it's required to
do call depth tracking.
Provide a return thunk for call depth tracking on Intel SKL CPUs.
The tracking does not use a counter. It uses uses arithmetic shift
right on call entry and logical shift left on return.
The depth tracking variable is initialized to 0x8000.... when the call
depth is zero. The arithmetic shift right sign extends the MSB and
saturates after the 12th call. The shift count is 5 so the tracking covers
12 nested calls. On return the variable is shifted left logically so it
becomes zero again.
CALL RET
0: 0x8000000000000000 0x0000000000000000
1: 0xfc00000000000000 0xf000000000000000
...
11: 0xfffffffffffffff8 0xfffffffffffffc00
12: 0xffffffffffffffff 0xffffffffffffffe0
After a return buffer fill the depth is credited 12 calls before the next
stuffing has to take place.
There is a inaccuracy for situations like this:
10 calls
5 returns
3 calls
4 returns
3 calls
....
The shift count might cause this to be off by one in either direction, but
there is still a cushion vs. the RSB depth. The algorithm does not claim to
be perfect, but it should obfuscate the problem enough to make exploitation
extremly difficult.
The theory behind this is:
RSB is a stack with depth 16 which is filled on every call. On the return
path speculation "pops" entries to speculate down the call chain. Once the
speculative RSB is empty it switches to other predictors, e.g. the Branch
History Buffer, which can be mistrained by user space and misguide the
speculation path to a gadget.
Call depth tracking is designed to break this speculation path by stuffing
speculation trap calls into the RSB which are never getting a corresponding
return executed. This stalls the prediction path until it gets resteered,
The assumption is that stuffing at the 12th return is sufficient to break
the speculation before it hits the underflow and the fallback to the other
predictors. Testing confirms that it works. Johannes, one of the retbleed
researchers. tried to attack this approach but failed.
There is obviously no scientific proof that this will withstand future
research progress, but all we can do right now is to speculate about it.
The SAR/SHL usage was suggested by Andi Kleen.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220915111147.890071690@infradead.org
If the number of AMD gp counters continues to grow, the code will
be very clumsy and the switch-case design of inline get_gp_pmc_amd()
will also bloat the kernel text size.
The target code is taught to manage two groups of MSRs, each
representing a different version of the AMD PMU counter MSRs.
The MSR addresses of each group are contiguous, with no holes,
and there is no intersection between two sets of addresses,
but they are discrete in functionality by design like this:
[Group A : All counter MSRs are tightly bound to all event select MSRs ]
MSR_K7_EVNTSEL0 0xc0010000
MSR_K7_EVNTSELi 0xc0010000 + i
...
MSR_K7_EVNTSEL3 0xc0010003
MSR_K7_PERFCTR0 0xc0010004
MSR_K7_PERFCTRi 0xc0010004 + i
...
MSR_K7_PERFCTR3 0xc0010007
[Group B : The counter MSRs are interleaved with the event select MSRs ]
MSR_F15H_PERF_CTL0 0xc0010200
MSR_F15H_PERF_CTR0 (0xc0010200 + 1)
...
MSR_F15H_PERF_CTLi (0xc0010200 + 2 * i)
MSR_F15H_PERF_CTRi (0xc0010200 + 2 * i + 1)
...
MSR_F15H_PERF_CTL5 (0xc0010200 + 2 * 5)
MSR_F15H_PERF_CTR5 (0xc0010200 + 2 * 5 + 1)
Rewrite get_gp_pmc_amd() in this way: first determine which group of
registers is accessed, then determine if it matches its requested type,
applying different scaling ratios respectively, and finally get pmc_idx
to pass into amd_pmc_idx_to_pmc().
Signed-off-by: Like Xu <likexu@tencent.com>
Link: https://lore.kernel.org/r/20220831085328.45489-8-likexu@tencent.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Access PMU counters on AMD by directly indexing the array of general
purpose counters instead of translating the PMC index to an MSR index.
AMD only supports gp counters, there's no need to translate a PMC index
to an MSR index and back to a PMC index.
Opportunistically apply array_index_nospec() to reduce the attack
surface for speculative execution and remove the dead code.
Signed-off-by: Like Xu <likexu@tencent.com>
Link: https://lore.kernel.org/r/20220831085328.45489-7-likexu@tencent.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Set KVM_REQ_EVENT if INIT or SIPI is pending when the guest enables GIF.
INIT in particular is blocked when GIF=0 and needs to be processed when
GIF is toggled to '1'. This bug has been masked by (a) KVM calling
->check_nested_events() in the core run loop and (b) hypervisors toggling
GIF from 0=>1 only when entering guest mode (L1 entering L2).
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220921003201.1441511-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename inject_pending_events() to kvm_check_and_inject_events() in order
to capture the fact that it handles more than just pending events, and to
(mostly) align with kvm_check_nested_events(), which omits the "inject"
for brevity.
Add a comment above kvm_check_and_inject_events() to provide a high-level
synopsis, and to document a virtualization hole (KVM erratum if you will)
that exists due to KVM not strictly tracking instruction boundaries with
respect to coincident instruction restarts and asynchronous events.
No functional change inteded.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20220830231614.3580124-25-seanjc@google.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Morph pending exceptions to pending VM-Exits (due to interception) when
the exception is queued instead of waiting until nested events are
checked at VM-Entry. This fixes a longstanding bug where KVM fails to
handle an exception that occurs during delivery of a previous exception,
KVM (L0) and L1 both want to intercept the exception (e.g. #PF for shadow
paging), and KVM determines that the exception is in the guest's domain,
i.e. queues the new exception for L2. Deferring the interception check
causes KVM to esclate various combinations of injected+pending exceptions
to double fault (#DF) without consulting L1's interception desires, and
ends up injecting a spurious #DF into L2.
KVM has fudged around the issue for #PF by special casing emulated #PF
injection for shadow paging, but the underlying issue is not unique to
shadow paging in L0, e.g. if KVM is intercepting #PF because the guest
has a smaller maxphyaddr and L1 (but not L0) is using shadow paging.
Other exceptions are affected as well, e.g. if KVM is intercepting #GP
for one of SVM's workaround or for the VMware backdoor emulation stuff.
The other cases have gone unnoticed because the #DF is spurious if and
only if L1 resolves the exception, e.g. KVM's goofs go unnoticed if L1
would have injected #DF anyways.
The hack-a-fix has also led to ugly code, e.g. bailing from the emulator
if #PF injection forced a nested VM-Exit and the emulator finds itself
back in L1. Allowing for direct-to-VM-Exit queueing also neatly solves
the async #PF in L2 mess; no need to set a magic flag and token, simply
queue a #PF nested VM-Exit.
Deal with event migration by flagging that a pending exception was queued
by userspace and check for interception at the next KVM_RUN, e.g. so that
KVM does the right thing regardless of the order in which userspace
restores nested state vs. event state.
When "getting" events from userspace, simply drop any pending excpetion
that is destined to be intercepted if there is also an injected exception
to be migrated. Ideally, KVM would migrate both events, but that would
require new ABI, and practically speaking losing the event is unlikely to
be noticed, let alone fatal. The injected exception is captured, RIP
still points at the original faulting instruction, etc... So either the
injection on the target will trigger the same intercepted exception, or
the source of the intercepted exception was transient and/or
non-deterministic, thus dropping it is ok-ish.
Fixes: a04aead144 ("KVM: nSVM: fix running nested guests when npt=0")
Fixes: feaf0c7dc4 ("KVM: nVMX: Do not generate #DF if #PF happens during exception delivery into L2")
Cc: Jim Mattson <jmattson@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20220830231614.3580124-22-seanjc@google.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Capture nested_run_pending as block_pending_exceptions so that the logic
of why exceptions are blocked only needs to be documented once instead of
at every place that employs the logic.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20220830231614.3580124-16-seanjc@google.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the definition of "struct kvm_queued_exception" out of kvm_vcpu_arch
in anticipation of adding a second instance in kvm_vcpu_arch to handle
exceptions that occur when vectoring an injected exception and are
morphed to VM-Exit instead of leading to #DF.
Opportunistically take advantage of the churn to rename "nr" to "vector".
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20220830231614.3580124-15-seanjc@google.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename the kvm_x86_ops hook for exception injection to better reflect
reality, and to align with pretty much every other related function name
in KVM.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20220830231614.3580124-14-seanjc@google.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Print guest pgd in kvm_nested_vmenter() to enrich the information for
tracing. When tdp is enabled, print the value of tdp page table (EPT/NPT);
when tdp is disabled, print the value of non-nested CR3.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Link: https://lore.kernel.org/r/20220825225755.907001-4-mizhang@google.com
[sean: print nested_cr3 vs. nested_eptp vs. guest_cr3]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Update trace function for nested VM entry to support VMX. Existing trace
function only supports nested VMX and the information printed out is AMD
specific.
So, rename trace_kvm_nested_vmrun() to trace_kvm_nested_vmenter(), since
'vmenter' is generic. Add a new field 'isa' to recognize Intel and AMD;
Update the output to print out VMX/SVM related naming respectively, eg.,
vmcb vs. vmcs; npt vs. ept.
Opportunistically update the call site of trace_kvm_nested_vmenter() to
make one line per parameter.
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Link: https://lore.kernel.org/r/20220825225755.907001-2-mizhang@google.com
[sean: align indentation, s/update/rename in changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, kvm_page_fault trace point provide fault_address and error
code. However it is not enough to find which cpu and instruction
cause kvm_page_faults. So add vcpu id and instruction pointer in
kvm_page_fault trace point.
Cc: Baik Song An <bsahn@etri.re.kr>
Cc: Hong Yeon Kim <kimhy@etri.re.kr>
Cc: Taeung Song <taeung@reallinux.co.kr>
Cc: linuxgeek@linuxgeek.io
Signed-off-by: Wonhyuk Yang <vvghjk1234@gmail.com>
Link: https://lore.kernel.org/r/20220510071001.87169-1-vvghjk1234@gmail.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since svm_check_nested_events() is now handling INIT signals, there is
no need to latch it until the VMEXIT is injected. The only condition
under which INIT signals are latched is GIF=0.
Suggested-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20220819165643.83692-1-pbonzini@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Disable SEV-ES if MMIO caching is disabled as SEV-ES relies on MMIO SPTEs
generating #NPF(RSVD), which are reflected by the CPU into the guest as
a #VC. With SEV-ES, the untrusted host, a.k.a. KVM, doesn't have access
to the guest instruction stream or register state and so can't directly
emulate in response to a #NPF on an emulated MMIO GPA. Disabling MMIO
caching means guest accesses to emulated MMIO ranges cause #NPF(!PRESENT),
and those flavors of #NPF cause automatic VM-Exits, not #VC.
Adjust KVM's MMIO masks to account for the C-bit location prior to doing
SEV(-ES) setup, and document that dependency between adjusting the MMIO
SPTE mask and SEV(-ES) setup.
Fixes: b09763da4d ("KVM: x86/mmu: Add module param to disable MMIO caching (for testing)")
Reported-by: Michael Roth <michael.roth@amd.com>
Tested-by: Michael Roth <michael.roth@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220803224957.1285926-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM/s390, KVM/x86 and common infrastructure changes for 5.20
x86:
* Permit guests to ignore single-bit ECC errors
* Fix races in gfn->pfn cache refresh; do not pin pages tracked by the cache
* Intel IPI virtualization
* Allow getting/setting pending triple fault with KVM_GET/SET_VCPU_EVENTS
* PEBS virtualization
* Simplify PMU emulation by just using PERF_TYPE_RAW events
* More accurate event reinjection on SVM (avoid retrying instructions)
* Allow getting/setting the state of the speaker port data bit
* Refuse starting the kvm-intel module if VM-Entry/VM-Exit controls are inconsistent
* "Notify" VM exit (detect microarchitectural hangs) for Intel
* Cleanups for MCE MSR emulation
s390:
* add an interface to provide a hypervisor dump for secure guests
* improve selftests to use TAP interface
* enable interpretive execution of zPCI instructions (for PCI passthrough)
* First part of deferred teardown
* CPU Topology
* PV attestation
* Minor fixes
Generic:
* new selftests API using struct kvm_vcpu instead of a (vm, id) tuple
x86:
* Use try_cmpxchg64 instead of cmpxchg64
* Bugfixes
* Ignore benign host accesses to PMU MSRs when PMU is disabled
* Allow disabling KVM's "MONITOR/MWAIT are NOPs!" behavior
* x86/MMU: Allow NX huge pages to be disabled on a per-vm basis
* Port eager page splitting to shadow MMU as well
* Enable CMCI capability by default and handle injected UCNA errors
* Expose pid of vcpu threads in debugfs
* x2AVIC support for AMD
* cleanup PIO emulation
* Fixes for LLDT/LTR emulation
* Don't require refcounted "struct page" to create huge SPTEs
x86 cleanups:
* Use separate namespaces for guest PTEs and shadow PTEs bitmasks
* PIO emulation
* Reorganize rmap API, mostly around rmap destruction
* Do not workaround very old KVM bugs for L0 that runs with nesting enabled
* new selftests API for CPUID
As Virtual Machine Save Area (VMSA) is essential in troubleshooting
attestation, dump it to the klog with the KERN_DEBUG level of priority.
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Suggested-by: Harald Hoyer <harald@profian.com>
Signed-off-by: Jarkko Sakkinen <jarkko@profian.com>
Message-Id: <20220728050919.24113-1-jarkko@profian.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
AMD does not support APIC TSC-deadline timer mode. AVIC hardware
will generate GP fault when guest kernel writes 1 to bits [18]
of the APIC LVTT register (offset 0x32) to set the timer mode.
(Note: bit 18 is reserved on AMD system).
Therefore, always intercept and let KVM emulate the MSR accesses.
Fixes: f3d7c8aa6882 ("KVM: SVM: Fix x2APIC MSRs interception")
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <20220725033428.3699-1-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Split the common x86 parts of kvm_is_valid_cr4(), i.e. the reserved bits
checks, into a separate helper, __kvm_is_valid_cr4(), and export only the
inner helper to vendor code in order to prevent nested VMX from calling
back into vmx_is_valid_cr4() via kvm_is_valid_cr4().
On SVM, this is a nop as SVM doesn't place any additional restrictions on
CR4.
On VMX, this is also currently a nop, but only because nested VMX is
missing checks on reserved CR4 bits for nested VM-Enter. That bug will
be fixed in a future patch, and could simply use kvm_is_valid_cr4() as-is,
but nVMX has _another_ bug where VMXON emulation doesn't enforce VMX's
restrictions on CR0/CR4. The cleanest and most intuitive way to fix the
VMXON bug is to use nested_host_cr{0,4}_valid(). If the CR4 variant
routes through kvm_is_valid_cr4(), using nested_host_cr4_valid() won't do
the right thing for the VMXON case as vmx_is_valid_cr4() enforces VMX's
restrictions if and only if the vCPU is post-VMXON.
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220607213604.3346000-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The index for svm_direct_access_msrs was incorrectly initialized with
the APIC MMIO register macros. Fix by introducing a macro for calculating
x2APIC MSRs.
Fixes: 5c127c8547 ("KVM: SVM: Adding support for configuring x2APIC MSRs interception")
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <20220718083833.222117-1-suravee.suthikulpanit@amd.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
enter_svm_guest_mode() first calls nested_vmcb02_prepare_control() to copy
control fields from VMCB12 to the current VMCB, then
nested_vmcb02_prepare_save() to perform a similar copy of the save area.
This means that nested_vmcb02_prepare_control() still runs with the
previous save area values in the current VMCB so it shouldn't take the L2
guest CS.Base from this area.
Explicitly pull CS.Base from the actual VMCB12 instead in
enter_svm_guest_mode().
Granted, having a non-zero CS.Base is a very rare thing (and even
impossible in 64-bit mode), having it change between nested VMRUNs is
probably even rarer, but if it happens it would create a really subtle bug
so it's better to fix it upfront.
Fixes: 6ef88d6e36 ("KVM: SVM: Re-inject INT3/INTO instead of retrying the instruction")
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <4caa0f67589ae3c22c311ee0e6139496902f2edc.1658159083.git.maciej.szmigiero@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Restrict get_mt_mask() to a u8 and reintroduce using a RET0 static_call
for the SVM implementation. EPT stores the memtype information in the
lower 8 bits (bits 6:3 to be precise), and even returns a shifted u8
without an explicit cast to a larger type; there's no need to return a
full u64.
Note, RET0 doesn't play nice with a u64 return on 32-bit kernels, see
commit bf07be36cd ("KVM: x86: do not use KVM_X86_OP_OPTIONAL_RET0 for
get_mt_mask").
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220714153707.3239119-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a second CPUID helper, kvm_find_cpuid_entry_index(), to handle KVM
queries for CPUID leaves whose index _may_ be significant, and drop the
index param from the existing kvm_find_cpuid_entry(). Add a WARN in the
inner helper, cpuid_entry2_find(), to detect attempts to retrieve a CPUID
entry whose index is significant without explicitly providing an index.
Using an explicit magic number and letting callers omit the index avoids
confusion by eliminating the myriad cases where KVM specifies '0' as a
dummy value.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Recently KVM's SVM code switched to re-injecting software interrupt events,
if something prevented their delivery.
Task switch due to task gate in the IDT, however is an exception
to this rule, because in this case, INTn instruction causes
a task switch intercept and its emulation completes the INTn
emulation as well.
Add a missing case to task_switch_interception for that.
This fixes 32 bit kvm unit test taskswitch2.
Fixes: 7e5b5ef8dc ("KVM: SVM: Re-inject INTn instead of retrying the insn on "failure"")
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <20220714124453.188655-1-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Note: needs to be in a section distinct from Retpolines such that the
Retpoline RET substitution cannot possibly use immediate jumps.
ORC unwinding for zen_untrain_ret() and __x86_return_thunk() is a
little tricky but works due to the fact that zen_untrain_ret() doesn't
have any stack ops and as such will emit a single ORC entry at the
start (+0x3f).
Meanwhile, unwinding an IP, including the __x86_return_thunk() one
(+0x40) will search for the largest ORC entry smaller or equal to the
IP, these will find the one ORC entry (+0x3f) and all works.
[ Alexandre: SVM part. ]
[ bp: Build fix, massages. ]
Suggested-by: Andrew Cooper <Andrew.Cooper3@citrix.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
- Avoid toggling the x2apic msr interception if it is already up to date.
- Avoid touching L0 msr bitmap when AVIC is inhibited on entry to
the guest mode, because in this case the guest usually uses its
own msr bitmap.
Later on VM exit, the 1st optimization will allow KVM to skip
touching the L0 msr bitmap as well.
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Tested-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220519102709.24125-18-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a tracepoint to track number of doorbells being sent
to signal a running vCPU to process IRQ after being injected.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <20220519102709.24125-17-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For x2AVIC, the index from incomplete IPI #vmexit info is invalid
for logical cluster mode. Only ICRH/ICRL values can be used
to determine the IPI destination APIC ID.
Since QEMU defines guest physical APIC ID to be the same as
vCPU ID, it can be used to quickly identify the target vCPU to deliver IPI,
and avoid the overhead from searching through all vCPUs to match the target
vCPU.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <20220519102709.24125-16-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, AVIC is inhibited when booting a VM w/ x2APIC support.
because AVIC cannot virtualize x2APIC MSR register accesses.
However, the AVIC doorbell can be used to accelerate interrupt
injection into a running vCPU, while all guest accesses to x2APIC MSRs
will be intercepted and emulated by KVM.
With hybrid-AVIC support, the APICV_INHIBIT_REASON_X2APIC is
no longer enforced.
Suggested-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <20220519102709.24125-14-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Originalliy, this WARN_ON is designed to detect when calling
avic_vcpu_load() on an already running vcpu in AVIC mode (i.e. the AVIC
is_running bit is set).
However, for x2AVIC, the vCPU can switch from xAPIC to x2APIC mode while in
running state, in which the avic_vcpu_load() will be called from
svm_refresh_apicv_exec_ctrl().
Therefore, remove this warning since it is no longer appropriate.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <20220519102709.24125-13-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce logic to (de)activate AVIC, which also allows
switching between AVIC to x2AVIC mode at runtime.
When an AVIC-enabled guest switches from APIC to x2APIC mode,
the SVM driver needs to perform the following steps:
1. Set the x2APIC mode bit for AVIC in VMCB along with the maximum
APIC ID support for each mode accodingly.
2. Disable x2APIC MSRs interception in order to allow the hardware
to virtualize x2APIC MSRs accesses.
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <20220519102709.24125-12-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As a preparation for x2avic, this patch ensures that x2apic msrs
are always intercepted for the nested guest.
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Tested-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220519102709.24125-11-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
AMD AVIC can support xAPIC and x2APIC virtualization,
which requires changing x2APIC bit VMCB and MSR intercepton
for x2APIC MSRs. Therefore, call avic_refresh_apicv_exec_ctrl()
to refresh configuration accordingly.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <20220519102709.24125-10-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When enabling x2APIC virtualization (x2AVIC), the interception of
x2APIC MSRs must be disabled to let the hardware virtualize guest
MSR accesses.
Current implementation keeps track of list of MSR interception state
in the svm_direct_access_msrs array. Therefore, extends the array to
include x2APIC MSRs.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <20220519102709.24125-8-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In X2APIC mode, the Logical Destination Register is read-only,
which provides a fixed mapping between the logical and physical
APIC IDs. Therefore, there is no Logical APIC ID table in X2AVIC
and the processor uses the X2APIC ID in the backing page to create
a vCPU’s logical ID.
In addition, KVM does not support updating APIC ID in x2APIC mode,
which means AVIC does not need to handle this case.
Therefore, check x2APIC mode when handling physical and logical
APIC ID update, and when invalidating logical APIC ID table.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Suggested-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <20220519102709.24125-7-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
xAVIC and x2AVIC modes can support diffferent number of vcpus.
Update existing logics to support each mode accordingly.
Also, modify the maximum physical APIC ID for AVIC to 255 to reflect
the actual value supported by the architecture.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <20220519102709.24125-5-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add CPUID check for the x2APIC virtualization (x2AVIC) feature.
If available, the SVM driver can support both AVIC and x2AVIC modes
when load the kvm_amd driver with avic=1. The operating mode will be
determined at runtime depending on the guest APIC mode.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <20220519102709.24125-4-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The target VMCBs during an intra-host migration need to correctly setup
for running SEV and SEV-ES guests. Add sev_init_vmcb() function and make
sev_es_init_vmcb() static. sev_init_vmcb() uses the now private function
to init SEV-ES guests VMCBs when needed.
Fixes: 0b020f5af0 ("KVM: SEV: Add support for SEV-ES intra host migration")
Fixes: b56639318b ("KVM: SEV: Add support for SEV intra host migration")
Signed-off-by: Peter Gonda <pgonda@google.com>
Cc: Marc Orr <marcorr@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Message-Id: <20220623173406.744645-1-pgonda@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Adding the accounting flag when allocating pages within the SEV function,
since these memory pages should belong to individual VM.
No functional change intended.
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Message-Id: <20220623171858.2083637-1-mizhang@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Revert the hack to allow host-initiated accesses to all "PMU" MSRs,
as intel_is_valid_msr() returns true for _all_ MSRs, regardless of whether
or not it has a snowball's chance in hell of actually being a PMU MSR.
That mostly gets papered over by the actual get/set helpers only handling
MSRs that they knows about, except there's the minor detail that
kvm_pmu_{g,s}et_msr() eat reads and writes when the PMU is disabled.
I.e. KVM will happy allow reads and writes to _any_ MSR if the PMU is
disabled, either via module param or capability.
This reverts commit d1c88a4020.
Fixes: d1c88a4020 ("KVM: x86: always allow host-initiated writes to PMU MSRs")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220611005755.753273-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Eating reads and writes to all "PMU" MSRs when there is no PMU is wildly
broken as it results in allowing accesses to _any_ MSR on Intel CPUs
as intel_is_valid_msr() returns true for all host_initiated accesses.
A revert of commit d1c88a4020 ("KVM: x86: always allow host-initiated
writes to PMU MSRs") will soon follow.
This reverts commit 8e6a58e28b.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220611005755.753273-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the per-vCPU apicv_active flag into KVM's local APIC instance.
APICv is fully dependent on an in-kernel local APIC, but that's not at
all clear when reading the current code due to the flag being stored in
the generic kvm_vcpu_arch struct.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220614230548.3852141-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop a handful of unused AVIC function declarations whose implementations
were removed during the conversion to optional static calls.
No functional change intended.
Fixes: abb6d479e2 ("KVM: x86: make several APIC virtualization callbacks optional")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220614230548.3852141-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use root_level in svm_load_mmu_pg() rather that looking up the root
level in vcpu->arch.mmu->root_role.level. svm_load_mmu_pgd() has only
one caller, kvm_mmu_load_pgd(), which always passes
vcpu->arch.mmu->root_role.level as root_level.
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Message-Id: <20220605063417.308311-7-jiangshanlai@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Wrap the manipulation of @role and the manual mutex_{release,acquire}()
invocations in CONFIG_PROVE_LOCKING=y to squash a clang-15 warning. When
building with -Wunused-but-set-parameter and CONFIG_DEBUG_LOCK_ALLOC=n,
clang-15 seees there's no usage of @role in mutex_lock_killable_nested()
and yells. PROVE_LOCKING selects DEBUG_LOCK_ALLOC, and the only reason
KVM manipulates @role is to make PROVE_LOCKING happy.
To avoid true ugliness, use "i" and "j" to detect the first pass in the
loops; the "idx" field that's used by kvm_for_each_vcpu() is guaranteed
to be '0' on the first pass as it's simply the first entry in the vCPUs
XArray, which is fully KVM controlled. kvm_for_each_vcpu() passes '0'
for xa_for_each_range()'s "start", and xa_for_each_range() will not enter
the loop if there's no entry at '0'.
Fixes: 0c2c7c0692 ("KVM: SEV: Mark nested locking of vcpu->lock")
Reported-by: kernel test robot <lkp@intel.com>
Cc: Peter Gonda <pgonda@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220613214237.2538266-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This caused a warning on 32-bit systems, but undoubtedly would have acted
funny on 64-bit as well.
The fix was applied directly on merge in 5.19, see commit 24625f7d91 ("Merge
tag for-linus of git://git.kernel.org/pub/scm/virt/kvm/kvm").
Fixes: 3743c2f025 ("KVM: x86: inhibit APICv/AVIC on changes to APIC ID or APIC base")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Properly reset the SVE/SME flags on vcpu load
* Fix a vgic-v2 regression regarding accessing the pending
state of a HW interrupt from userspace (and make the code
common with vgic-v3)
* Fix access to the idreg range for protected guests
* Ignore 'kvm-arm.mode=protected' when using VHE
* Return an error from kvm_arch_init_vm() on allocation failure
* A bunch of small cleanups (comments, annotations, indentation)
RISC-V:
* Typo fix in arch/riscv/kvm/vmid.c
* Remove broken reference pattern from MAINTAINERS entry
x86-64:
* Fix error in page tables with MKTME enabled
* Dirty page tracking performance test extended to running a nested
guest
* Disable APICv/AVIC in cases that it cannot implement correctly
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmKjTIAUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNhPQgAiIVtp8aepujUM/NhkNyK3SIdLzlS
oZCZiS6bvaecKXi/QvhBU0EBxAEyrovk3lmVuYNd41xI+PDjyaA4SDIl5DnToGUw
bVPNFSYqjpF939vUUKjc0RCdZR4o5g3Od3tvWoHTHviS1a8aAe5o9pcpHpD0D6Mp
Gc/o58nKAOPl3htcFKmjymqo3Y6yvkJU9NB7DCbL8T5mp5pJ959Mw1/LlmBaAzJC
OofrynUm4NjMyAj/mAB1FhHKFyQfjBXLhiVlS0SLiiEA/tn9/OXyVFMKG+n5VkAZ
Q337GMFe2RikEIuMEr3Rc4qbZK3PpxHhaj+6MPRuM0ho/P4yzl2Nyb/OhA==
=h81Q
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"While last week's pull request contained miscellaneous fixes for x86,
this one covers other architectures, selftests changes, and a bigger
series for APIC virtualization bugs that were discovered during 5.20
development. The idea is to base 5.20 development for KVM on top of
this tag.
ARM64:
- Properly reset the SVE/SME flags on vcpu load
- Fix a vgic-v2 regression regarding accessing the pending state of a
HW interrupt from userspace (and make the code common with vgic-v3)
- Fix access to the idreg range for protected guests
- Ignore 'kvm-arm.mode=protected' when using VHE
- Return an error from kvm_arch_init_vm() on allocation failure
- A bunch of small cleanups (comments, annotations, indentation)
RISC-V:
- Typo fix in arch/riscv/kvm/vmid.c
- Remove broken reference pattern from MAINTAINERS entry
x86-64:
- Fix error in page tables with MKTME enabled
- Dirty page tracking performance test extended to running a nested
guest
- Disable APICv/AVIC in cases that it cannot implement correctly"
[ This merge also fixes a misplaced end parenthesis bug introduced in
commit 3743c2f025 ("KVM: x86: inhibit APICv/AVIC on changes to APIC
ID or APIC base") pointed out by Sean Christopherson ]
Link: https://lore.kernel.org/all/20220610191813.371682-1-seanjc@google.com/
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (34 commits)
KVM: selftests: Restrict test region to 48-bit physical addresses when using nested
KVM: selftests: Add option to run dirty_log_perf_test vCPUs in L2
KVM: selftests: Clean up LIBKVM files in Makefile
KVM: selftests: Link selftests directly with lib object files
KVM: selftests: Drop unnecessary rule for STATIC_LIBS
KVM: selftests: Add a helper to check EPT/VPID capabilities
KVM: selftests: Move VMX_EPT_VPID_CAP_AD_BITS to vmx.h
KVM: selftests: Refactor nested_map() to specify target level
KVM: selftests: Drop stale function parameter comment for nested_map()
KVM: selftests: Add option to create 2M and 1G EPT mappings
KVM: selftests: Replace x86_page_size with PG_LEVEL_XX
KVM: x86: SVM: fix nested PAUSE filtering when L0 intercepts PAUSE
KVM: x86: SVM: drop preempt-safe wrappers for avic_vcpu_load/put
KVM: x86: disable preemption around the call to kvm_arch_vcpu_{un|}blocking
KVM: x86: disable preemption while updating apicv inhibition
KVM: x86: SVM: fix avic_kick_target_vcpus_fast
KVM: x86: SVM: remove avic's broken code that updated APIC ID
KVM: x86: inhibit APICv/AVIC on changes to APIC ID or APIC base
KVM: x86: document AVIC/APICv inhibit reasons
KVM: x86/mmu: Set memory encryption "value", not "mask", in shadow PDPTRs
...
s390:
* add an interface to provide a hypervisor dump for secure guests
* improve selftests to show tests
x86:
* Intel IPI virtualization
* Allow getting/setting pending triple fault with KVM_GET/SET_VCPU_EVENTS
* PEBS virtualization
* Simplify PMU emulation by just using PERF_TYPE_RAW events
* More accurate event reinjection on SVM (avoid retrying instructions)
* Allow getting/setting the state of the speaker port data bit
* Rewrite gfn-pfn cache refresh
* Refuse starting the module if VM-Entry/VM-Exit controls are inconsistent
* "Notify" VM exit
Commit 74fd41ed16 ("KVM: x86: nSVM: support PAUSE filtering when L0
doesn't intercept PAUSE") introduced passthrough support for nested pause
filtering, (when the host doesn't intercept PAUSE) (either disabled with
kvm module param, or disabled with '-overcommit cpu-pm=on')
Before this commit, L1 KVM didn't intercept PAUSE at all; afterwards,
the feature was exposed as supported by KVM cpuid unconditionally, thus
if L1 could try to use it even when the L0 KVM can't really support it.
In this case the fallback caused KVM to intercept each PAUSE instruction;
in some cases, such intercept can slow down the nested guest so much
that it can fail to boot. Instead, before the problematic commit KVM
was already setting both thresholds to 0 in vmcb02, but after the first
userspace VM exit shrink_ple_window was called and would reset the
pause_filter_count to the default value.
To fix this, change the fallback strategy - ignore the guest threshold
values, but use/update the host threshold values unless the guest
specifically requests disabling PAUSE filtering (either simple or
advanced).
Also fix a minor bug: on nested VM exit, when PAUSE filter counter
were copied back to vmcb01, a dirty bit was not set.
Thanks a lot to Suravee Suthikulpanit for debugging this!
Fixes: 74fd41ed16 ("KVM: x86: nSVM: support PAUSE filtering when L0 doesn't intercept PAUSE")
Reported-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Tested-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Co-developed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220518072709.730031-1-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that these functions are always called with preemption disabled,
remove the preempt_disable()/preempt_enable() pair inside them.
No functional change intended.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220606180829.102503-8-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are two issues in avic_kick_target_vcpus_fast
1. It is legal to issue an IPI request with APIC_DEST_NOSHORT
and a physical destination of 0xFF (or 0xFFFFFFFF in case of x2apic),
which must be treated as a broadcast destination.
Fix this by explicitly checking for it.
Also don’t use ‘index’ in this case as it gives no new information.
2. It is legal to issue a logical IPI request to more than one target.
Index field only provides index in physical id table of first
such target and therefore can't be used before we are sure
that only a single target was addressed.
Instead, parse the ICRL/ICRH, double check that a unicast interrupt
was requested, and use that info to figure out the physical id
of the target vCPU.
At that point there is no need to use the index field as well.
In addition to fixing the above issues, also skip the call to
kvm_apic_match_dest.
It is possible to do this now, because now as long as AVIC is not
inhibited, it is guaranteed that none of the vCPUs changed their
apic id from its default value.
This fixes boot of windows guest with AVIC enabled because it uses
IPI with 0xFF destination and no destination shorthand.
Fixes: 7223fd2d53 ("KVM: SVM: Use target APIC ID to complete AVIC IRQs when possible")
Cc: stable@vger.kernel.org
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220606180829.102503-5-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
AVIC is now inhibited if the guest changes the apic id,
and therefore this code is no longer needed.
There are several ways this code was broken, including:
1. a vCPU was only allowed to change its apic id to an apic id
of an existing vCPU.
2. After such change, the vCPU whose apic id entry was overwritten,
could not correctly change its own apic id, because its own
entry is already overwritten.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220606180829.102503-4-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Neither of these settings should be changed by the guest and it is
a burden to support it in the acceleration code, so just inhibit
this code instead.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220606180829.102503-3-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Whenever an MSR is part of KVM_GET_MSR_INDEX_LIST, as is the case for
MSR_K7_EVNTSEL0 or MSR_F15H_PERF_CTL0, it has to be always retrievable
and settable with KVM_GET_MSR and KVM_SET_MSR.
Accept a zero value for these MSRs to obey the contract.
Signed-off-by: Like Xu <likexu@tencent.com>
Message-Id: <20220601031925.59693-1-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Fix TDP MMU performance issue with disabling dirty logging
* Fix 5.14 regression with SVM TSC scaling
* Fix indefinite stall on applying live patches
* Fix unstable selftest
* Fix memory leak from wrong copy-and-paste
* Fix missed PV TLB flush when racing with emulation
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmKglysUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOJDAgArpPcAnJbeT2VQTQcp94e4tp9k1Sf
gmUewajco4zFVB/sldE0fIporETkaX+FYYPiaNDdNgJ2lUw/HUJBN7KoFEYTZ37N
Xx/qXiIXQYFw1bmxTnacLzIQtD3luMCzOs/6/Q7CAFZIBpUtUEjkMlQOBuxoKeG0
B0iLCTJSw0taWcN170aN8G6T+5+bdR3AJW1k2wkgfESfYF9NfJoTUHQj9WTMzM2R
aBRuXvUI/rWKvQY3DfoRmgg9Ig/SirSC+abbKIs4H08vZIEUlPk3WOZSKpsN/Wzh
3XDnVRxgnaRLx6NI/ouI2UYJCmjPKbNcueGCf5IfUcHvngHjAEG/xxe4Qw==
=zQ9u
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
- syzkaller NULL pointer dereference
- TDP MMU performance issue with disabling dirty logging
- 5.14 regression with SVM TSC scaling
- indefinite stall on applying live patches
- unstable selftest
- memory leak from wrong copy-and-paste
- missed PV TLB flush when racing with emulation
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: do not report a vCPU as preempted outside instruction boundaries
KVM: x86: do not set st->preempted when going back to user space
KVM: SVM: fix tsc scaling cache logic
KVM: selftests: Make hyperv_clock selftest more stable
KVM: x86/MMU: Zap non-leaf SPTEs when disabling dirty logging
x86: drop bogus "cc" clobber from __try_cmpxchg_user_asm()
KVM: x86/mmu: Check every prev_roots in __kvm_mmu_free_obsolete_roots()
entry/kvm: Exit to user mode when TIF_NOTIFY_SIGNAL is set
KVM: Don't null dereference ops->destroy
Add kvm_caps to hold a variety of capabilites and defaults that aren't
handled by kvm_cpu_caps because they aren't CPUID bits in order to reduce
the amount of boilerplate code required to add a new feature. The vast
majority (all?) of the caps interact with vendor code and are written
only during initialization, i.e. should be tagged __read_mostly, declared
extern in x86.h, and exported.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220524135624.22988-4-chenyi.qiang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All gp or fixed counters have been reprogrammed using PERF_TYPE_RAW,
which means that the table that maps perf_hw_id to event select values is
no longer useful, at least for AMD.
For Intel, the logic to check if the pmu event reported by Intel cpuid is
not available is still required, in which case pmc_perf_hw_id() could be
renamed to hw_event_is_unavail() and a bool value is returned to replace
the semantics of "PERF_COUNT_HW_MAX+1".
Signed-off-by: Like Xu <likexu@tencent.com>
Message-Id: <20220518132512.37864-12-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since reprogram_counter(), reprogram_{gp, fixed}_counter() currently have
the same incoming parameter "struct kvm_pmc *pmc", the callers can simplify
the conetxt by using uniformly exported interface, which makes reprogram_
{gp, fixed}_counter() static and eliminates EXPORT_SYMBOL_GPL.
Signed-off-by: Like Xu <likexu@tencent.com>
Message-Id: <20220518132512.37864-8-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Because inside reprogram_gp_counter() it is bound to assign the requested
eventel to pmc->eventsel, this assignment step can be moved forward, thus
simplifying the passing of parameters to "struct kvm_pmc *pmc" only.
No functional change intended.
Signed-off-by: Like Xu <likexu@tencent.com>
Message-Id: <20220518132512.37864-6-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Whenever an MSR is part of KVM_GET_MSR_INDEX_LIST, it has to be always
retrievable and settable with KVM_GET_MSR and KVM_SET_MSR. Accept
the PMU MSRs unconditionally in intel_is_valid_msr, if the access was
host-initiated.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A NMI that L1 wants to inject into its L2 should be directly re-injected,
without causing L0 side effects like engaging NMI blocking for L1.
It's also worth noting that in this case it is L1 responsibility
to track the NMI window status for its L2 guest.
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <f894d13501cd48157b3069a4b4c7369575ddb60e.1651440202.git.maciej.szmigiero@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In the IRQ injection tracepoint, differentiate between Hard IRQs and Soft
"IRQs", i.e. interrupts that are reinjected after incomplete delivery of
a software interrupt from an INTn instruction. Tag reinjected interrupts
as such, even though the information is usually redundant since soft
interrupts are only ever reinjected by KVM. Though rare in practice, a
hard IRQ can be reinjected.
Signed-off-by: Sean Christopherson <seanjc@google.com>
[MSS: change "kvm_inj_virq" event "reinjected" field type to bool]
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <9664d49b3bd21e227caa501cff77b0569bebffe2.1651440202.git.maciej.szmigiero@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Re-inject INTn software interrupts instead of retrying the instruction if
the CPU encountered an intercepted exception while vectoring the INTn,
e.g. if KVM intercepted a #PF when utilizing shadow paging. Retrying the
instruction is architecturally wrong e.g. will result in a spurious #DB
if there's a code breakpoint on the INT3/O, and lack of re-injection also
breaks nested virtualization, e.g. if L1 injects a software interrupt and
vectoring the injected interrupt encounters an exception that is
intercepted by L0 but not L1.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <1654ad502f860948e4f2d57b8bd881d67301f785.1651440202.git.maciej.szmigiero@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Re-inject INT3/INTO instead of retrying the instruction if the CPU
encountered an intercepted exception while vectoring the software
exception, e.g. if vectoring INT3 encounters a #PF and KVM is using
shadow paging. Retrying the instruction is architecturally wrong, e.g.
will result in a spurious #DB if there's a code breakpoint on the INT3/O,
and lack of re-injection also breaks nested virtualization, e.g. if L1
injects a software exception and vectoring the injected exception
encounters an exception that is intercepted by L0 but not L1.
Due to, ahem, deficiencies in the SVM architecture, acquiring the next
RIP may require flowing through the emulator even if NRIPS is supported,
as the CPU clears next_rip if the VM-Exit is due to an exception other
than "exceptions caused by the INT3, INTO, and BOUND instructions". To
deal with this, "skip" the instruction to calculate next_rip (if it's
not already known), and then unwind the RIP write and any side effects
(RFLAGS updates).
Save the computed next_rip and use it to re-stuff next_rip if injection
doesn't complete. This allows KVM to do the right thing if next_rip was
known prior to injection, e.g. if L1 injects a soft event into L2, and
there is no backing INTn instruction, e.g. if L1 is injecting an
arbitrary event.
Note, it's impossible to guarantee architectural correctness given SVM's
architectural flaws. E.g. if the guest executes INTn (no KVM injection),
an exit occurs while vectoring the INTn, and the guest modifies the code
stream while the exit is being handled, KVM will compute the incorrect
next_rip due to "skipping" the wrong instruction. A future enhancement
to make this less awful would be for KVM to detect that the decoded
instruction is not the correct INTn and drop the to-be-injected soft
event (retrying is a lesser evil compared to shoving the wrong RIP on the
exception stack).
Reported-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <65cb88deab40bc1649d509194864312a89bbe02e.1651440202.git.maciej.szmigiero@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If NRIPS is supported in hardware but disabled in KVM, set next_rip to
the next RIP when advancing RIP as part of emulating INT3 injection.
There is no flag to tell the CPU that KVM isn't using next_rip, and so
leaving next_rip is left as is will result in the CPU pushing garbage
onto the stack when vectoring the injected event.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Fixes: 66b7138f91 ("KVM: SVM: Emulate nRIP feature when reinjecting INT3")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <cd328309a3b88604daa2359ad56f36cb565ce2d4.1651440202.git.maciej.szmigiero@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Unwind the RIP advancement done by svm_queue_exception() when injecting
an INT3 ultimately "fails" due to the CPU encountering a VM-Exit while
vectoring the injected event, even if the exception reported by the CPU
isn't the same event that was injected. If vectoring INT3 encounters an
exception, e.g. #NP, and vectoring the #NP encounters an intercepted
exception, e.g. #PF when KVM is using shadow paging, then the #NP will
be reported as the event that was in-progress.
Note, this is still imperfect, as it will get a false positive if the
INT3 is cleanly injected, no VM-Exit occurs before the IRET from the INT3
handler in the guest, the instruction following the INT3 generates an
exception (directly or indirectly), _and_ vectoring that exception
encounters an exception that is intercepted by KVM. The false positives
could theoretically be solved by further analyzing the vectoring event,
e.g. by comparing the error code against the expected error code were an
exception to occur when vectoring the original injected exception, but
SVM without NRIPS is a complete disaster, trying to make it 100% correct
is a waste of time.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Fixes: 66b7138f91 ("KVM: SVM: Emulate nRIP feature when reinjecting INT3")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <450133cf0a026cb9825a2ff55d02cb136a1cb111.1651440202.git.maciej.szmigiero@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The next_rip field of a VMCB is *not* an output-only field for a VMRUN.
This field value (instead of the saved guest RIP) in used by the CPU for
the return address pushed on stack when injecting a software interrupt or
INT3 or INTO exception.
Make sure this field gets synced from vmcb12 to vmcb02 when entering L2 or
loading a nested state and NRIPS is exposed to L1. If NRIPS is supported
in hardware but not exposed to L1 (nrips=0 or hidden by userspace), stuff
vmcb02's next_rip from the new L2 RIP to emulate a !NRIPS CPU (which
saves RIP on the stack as-is).
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <c2e0a3d78db3ae30530f11d4e9254b452a89f42b.1651440202.git.maciej.szmigiero@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If a vCPU is outside guest mode and is scheduled out, it might be in the
process of making a memory access. A problem occurs if another vCPU uses
the PV TLB flush feature during the period when the vCPU is scheduled
out, and a virtual address has already been translated but has not yet
been accessed, because this is equivalent to using a stale TLB entry.
To avoid this, only report a vCPU as preempted if sure that the guest
is at an instruction boundary. A rescheduling request will be delivered
to the host physical CPU as an external interrupt, so for simplicity
consider any vmexit *not* instruction boundary except for external
interrupts.
It would in principle be okay to report the vCPU as preempted also
if it is sleeping in kvm_vcpu_block(): a TLB flush IPI will incur the
vmentry/vmexit overhead unnecessarily, and optimistic spinning is
also unlikely to succeed. However, leave it for later because right
now kvm_vcpu_check_block() is doing memory accesses. Even
though the TLB flush issue only applies to virtual memory address,
it's very much preferrable to be conservative.
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SVM uses a per-cpu variable to cache the current value of the
tsc scaling multiplier msr on each cpu.
Commit 1ab9287add
("KVM: X86: Add vendor callbacks for writing the TSC multiplier")
broke this caching logic.
Refactor the code so that all TSC scaling multiplier writes go through
a single function which checks and updates the cache.
This fixes the following scenario:
1. A CPU runs a guest with some tsc scaling ratio.
2. New guest with different tsc scaling ratio starts on this CPU
and terminates almost immediately.
This ensures that the short running guest had set the tsc scaling ratio just
once when it was set via KVM_SET_TSC_KHZ. Due to the bug,
the per-cpu cache is not updated.
3. The original guest continues to run, it doesn't restore the msr
value back to its own value, because the cache matches,
and thus continues to run with a wrong tsc scaling ratio.
Fixes: 1ab9287add ("KVM: X86: Add vendor callbacks for writing the TSC multiplier")
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220606181149.103072-1-mlevitsk@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* ultravisor communication device driver
* fix TEID on terminating storage key ops
RISC-V:
* Added Sv57x4 support for G-stage page table
* Added range based local HFENCE functions
* Added remote HFENCE functions based on VCPU requests
* Added ISA extension registers in ONE_REG interface
* Updated KVM RISC-V maintainers entry to cover selftests support
ARM:
* Add support for the ARMv8.6 WFxT extension
* Guard pages for the EL2 stacks
* Trap and emulate AArch32 ID registers to hide unsupported features
* Ability to select and save/restore the set of hypercalls exposed
to the guest
* Support for PSCI-initiated suspend in collaboration with userspace
* GICv3 register-based LPI invalidation support
* Move host PMU event merging into the vcpu data structure
* GICv3 ITS save/restore fixes
* The usual set of small-scale cleanups and fixes
x86:
* New ioctls to get/set TSC frequency for a whole VM
* Allow userspace to opt out of hypercall patching
* Only do MSR filtering for MSRs accessed by rdmsr/wrmsr
AMD SEV improvements:
* Add KVM_EXIT_SHUTDOWN metadata for SEV-ES
* V_TSC_AUX support
Nested virtualization improvements for AMD:
* Support for "nested nested" optimizations (nested vVMLOAD/VMSAVE,
nested vGIF)
* Allow AVIC to co-exist with a nested guest running
* Fixes for LBR virtualizations when a nested guest is running,
and nested LBR virtualization support
* PAUSE filtering for nested hypervisors
Guest support:
* Decoupling of vcpu_is_preempted from PV spinlocks
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmKN9M4UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNLeAf+KizAlQwxEehHHeNyTkZuKyMawrD6
zsqAENR6i1TxiXe7fDfPFbO2NR0ZulQopHbD9mwnHJ+nNw0J4UT7g3ii1IAVcXPu
rQNRGMVWiu54jt+lep8/gDg0JvPGKVVKLhxUaU1kdWT9PhIOC6lwpP3vmeWkUfRi
PFL/TMT0M8Nfryi0zHB0tXeqg41BiXfqO8wMySfBAHUbpv8D53D2eXQL6YlMM0pL
2quB1HxHnpueE5vj3WEPQ3PCdy1M2MTfCDBJAbZGG78Ljx45FxSGoQcmiBpPnhJr
C6UGP4ZDWpml5YULUoA70k5ylCbP+vI61U4vUtzEiOjHugpPV5wFKtx5nw==
=ozWx
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"S390:
- ultravisor communication device driver
- fix TEID on terminating storage key ops
RISC-V:
- Added Sv57x4 support for G-stage page table
- Added range based local HFENCE functions
- Added remote HFENCE functions based on VCPU requests
- Added ISA extension registers in ONE_REG interface
- Updated KVM RISC-V maintainers entry to cover selftests support
ARM:
- Add support for the ARMv8.6 WFxT extension
- Guard pages for the EL2 stacks
- Trap and emulate AArch32 ID registers to hide unsupported features
- Ability to select and save/restore the set of hypercalls exposed to
the guest
- Support for PSCI-initiated suspend in collaboration with userspace
- GICv3 register-based LPI invalidation support
- Move host PMU event merging into the vcpu data structure
- GICv3 ITS save/restore fixes
- The usual set of small-scale cleanups and fixes
x86:
- New ioctls to get/set TSC frequency for a whole VM
- Allow userspace to opt out of hypercall patching
- Only do MSR filtering for MSRs accessed by rdmsr/wrmsr
AMD SEV improvements:
- Add KVM_EXIT_SHUTDOWN metadata for SEV-ES
- V_TSC_AUX support
Nested virtualization improvements for AMD:
- Support for "nested nested" optimizations (nested vVMLOAD/VMSAVE,
nested vGIF)
- Allow AVIC to co-exist with a nested guest running
- Fixes for LBR virtualizations when a nested guest is running, and
nested LBR virtualization support
- PAUSE filtering for nested hypervisors
Guest support:
- Decoupling of vcpu_is_preempted from PV spinlocks"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (199 commits)
KVM: x86: Fix the intel_pt PMI handling wrongly considered from guest
KVM: selftests: x86: Sync the new name of the test case to .gitignore
Documentation: kvm: reorder ARM-specific section about KVM_SYSTEM_EVENT_SUSPEND
x86, kvm: use correct GFP flags for preemption disabled
KVM: LAPIC: Drop pending LAPIC timer injection when canceling the timer
x86/kvm: Alloc dummy async #PF token outside of raw spinlock
KVM: x86: avoid calling x86 emulator without a decoded instruction
KVM: SVM: Use kzalloc for sev ioctl interfaces to prevent kernel data leak
x86/fpu: KVM: Set the base guest FPU uABI size to sizeof(struct kvm_xsave)
s390/uv_uapi: depend on CONFIG_S390
KVM: selftests: x86: Fix test failure on arch lbr capable platforms
KVM: LAPIC: Trace LAPIC timer expiration on every vmentry
KVM: s390: selftest: Test suppression indication on key prot exception
KVM: s390: Don't indicate suppression on dirtying, failing memop
selftests: drivers/s390x: Add uvdevice tests
drivers/s390/char: Add Ultravisor io device
MAINTAINERS: Update KVM RISC-V entry to cover selftests support
RISC-V: KVM: Introduce ISA extension register
RISC-V: KVM: Cleanup stale TLB entries when host CPU changes
RISC-V: KVM: Add remote HFENCE functions based on VCPU requests
...
For some sev ioctl interfaces, the length parameter that is passed maybe
less than or equal to SEV_FW_BLOB_MAX_SIZE, but larger than the data
that PSP firmware returns. In this case, kmalloc will allocate memory
that is the size of the input rather than the size of the data.
Since PSP firmware doesn't fully overwrite the allocated buffer, these
sev ioctl interface may return uninitialized kernel slab memory.
Reported-by: Andy Nguyen <theflow@google.com>
Suggested-by: David Rientjes <rientjes@google.com>
Suggested-by: Peter Gonda <pgonda@google.com>
Cc: kvm@vger.kernel.org
Cc: stable@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Fixes: eaf78265a4 ("KVM: SVM: Move SEV code to separate file")
Fixes: 2c07ded064 ("KVM: SVM: add support for SEV attestation command")
Fixes: 4cfdd47d6d ("KVM: SVM: Add KVM_SEV SEND_START command")
Fixes: d3d1af85e2 ("KVM: SVM: Add KVM_SEND_UPDATE_DATA command")
Fixes: eba04b20e4 ("KVM: x86: Account a variety of miscellaneous allocations")
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Reviewed-by: Peter Gonda <pgonda@google.com>
Message-Id: <20220516154310.3685678-1-Ashish.Kalra@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Added Sv57x4 support for G-stage page table
- Added range based local HFENCE functions
- Added remote HFENCE functions based on VCPU requests
- Added ISA extension registers in ONE_REG interface
- Updated KVM RISC-V maintainers entry to cover selftests support
-----BEGIN PGP SIGNATURE-----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=Xznv
-----END PGP SIGNATURE-----
Merge tag 'kvm-riscv-5.19-1' of https://github.com/kvm-riscv/linux into HEAD
KVM/riscv changes for 5.19
- Added Sv57x4 support for G-stage page table
- Added range based local HFENCE functions
- Added remote HFENCE functions based on VCPU requests
- Added ISA extension registers in ONE_REG interface
- Updated KVM RISC-V maintainers entry to cover selftests support
- Add support for the ARMv8.6 WFxT extension
- Guard pages for the EL2 stacks
- Trap and emulate AArch32 ID registers to hide unsupported features
- Ability to select and save/restore the set of hypercalls exposed
to the guest
- Support for PSCI-initiated suspend in collaboration with userspace
- GICv3 register-based LPI invalidation support
- Move host PMU event merging into the vcpu data structure
- GICv3 ITS save/restore fixes
- The usual set of small-scale cleanups and fixes
-----BEGIN PGP SIGNATURE-----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=mh7W
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 5.19
- Add support for the ARMv8.6 WFxT extension
- Guard pages for the EL2 stacks
- Trap and emulate AArch32 ID registers to hide unsupported features
- Ability to select and save/restore the set of hypercalls exposed
to the guest
- Support for PSCI-initiated suspend in collaboration with userspace
- GICv3 register-based LPI invalidation support
- Move host PMU event merging into the vcpu data structure
- GICv3 ITS save/restore fixes
- The usual set of small-scale cleanups and fixes
[Due to the conflict, KVM_SYSTEM_EVENT_SEV_TERM is relocated
from 4 to 6. - Paolo]
Add to confidential guests the necessary memory integrity protection
against malicious hypervisor-based attacks like data replay, memory
remapping and others, thus achieving a stronger isolation from the
hypervisor.
At the core of the functionality is a new structure called a reverse
map table (RMP) with which the guest has a say in which pages get
assigned to it and gets notified when a page which it owns, gets
accessed/modified under the covers so that the guest can take an
appropriate action.
In addition, add support for the whole machinery needed to launch a SNP
guest, details of which is properly explained in each patch.
And last but not least, the series refactors and improves parts of the
previous SEV support so that the new code is accomodated properly and
not just bolted on.
-----BEGIN PGP SIGNATURE-----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=Y8kW
-----END PGP SIGNATURE-----
Merge tag 'x86_sev_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull AMD SEV-SNP support from Borislav Petkov:
"The third AMD confidential computing feature called Secure Nested
Paging.
Add to confidential guests the necessary memory integrity protection
against malicious hypervisor-based attacks like data replay, memory
remapping and others, thus achieving a stronger isolation from the
hypervisor.
At the core of the functionality is a new structure called a reverse
map table (RMP) with which the guest has a say in which pages get
assigned to it and gets notified when a page which it owns, gets
accessed/modified under the covers so that the guest can take an
appropriate action.
In addition, add support for the whole machinery needed to launch a
SNP guest, details of which is properly explained in each patch.
And last but not least, the series refactors and improves parts of the
previous SEV support so that the new code is accomodated properly and
not just bolted on"
* tag 'x86_sev_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits)
x86/entry: Fixup objtool/ibt validation
x86/sev: Mark the code returning to user space as syscall gap
x86/sev: Annotate stack change in the #VC handler
x86/sev: Remove duplicated assignment to variable info
x86/sev: Fix address space sparse warning
x86/sev: Get the AP jump table address from secrets page
x86/sev: Add missing __init annotations to SEV init routines
virt: sevguest: Rename the sevguest dir and files to sev-guest
virt: sevguest: Change driver name to reflect generic SEV support
x86/boot: Put globals that are accessed early into the .data section
x86/boot: Add an efi.h header for the decompressor
virt: sevguest: Fix bool function returning negative value
virt: sevguest: Fix return value check in alloc_shared_pages()
x86/sev-es: Replace open-coded hlt-loop with sev_es_terminate()
virt: sevguest: Add documentation for SEV-SNP CPUID Enforcement
virt: sevguest: Add support to get extended report
virt: sevguest: Add support to derive key
virt: Add SEV-SNP guest driver
x86/sev: Register SEV-SNP guest request platform device
x86/sev: Provide support for SNP guest request NAEs
...
Intel Multi-Key Total Memory Encryption (MKTME) repurposes couple of
high bits of physical address bits as 'KeyID' bits. Intel Trust Domain
Extentions (TDX) further steals part of MKTME KeyID bits as TDX private
KeyID bits. TDX private KeyID bits cannot be set in any mapping in the
host kernel since they can only be accessed by software running inside a
new CPU isolated mode. And unlike to AMD's SME, host kernel doesn't set
any legacy MKTME KeyID bits to any mapping either. Therefore, it's not
legitimate for KVM to set any KeyID bits in SPTE which maps guest
memory.
KVM maintains shadow_zero_check bits to represent which bits must be
zero for SPTE which maps guest memory. MKTME KeyID bits should be set
to shadow_zero_check. Currently, shadow_me_mask is used by AMD to set
the sme_me_mask to SPTE, and shadow_me_shadow is excluded from
shadow_zero_check. So initializing shadow_me_mask to represent all
MKTME keyID bits doesn't work for VMX (as oppositely, they must be set
to shadow_zero_check).
Introduce a new 'shadow_me_value' to replace existing shadow_me_mask,
and repurpose shadow_me_mask as 'all possible memory encryption bits'.
The new schematic of them will be:
- shadow_me_value: the memory encryption bit(s) that will be set to the
SPTE (the original shadow_me_mask).
- shadow_me_mask: all possible memory encryption bits (which is a super
set of shadow_me_value).
- For now, shadow_me_value is supposed to be set by SVM and VMX
respectively, and it is a constant during KVM's life time. This
perhaps doesn't fit MKTME but for now host kernel doesn't support it
(and perhaps will never do).
- Bits in shadow_me_mask are set to shadow_zero_check, except the bits
in shadow_me_value.
Introduce a new helper kvm_mmu_set_me_spte_mask() to initialize them.
Replace shadow_me_mask with shadow_me_value in almost all code paths,
except the one in PT64_PERM_MASK, which is used by need_remote_flush()
to determine whether remote TLB flush is needed. This should still use
shadow_me_mask as any encryption bit change should need a TLB flush.
And for AMD, move initializing shadow_me_value/shadow_me_mask from
kvm_mmu_reset_all_pte_masks() to svm_hardware_setup().
Signed-off-by: Kai Huang <kai.huang@intel.com>
Message-Id: <f90964b93a3398b1cf1c56f510f3281e0709e2ab.1650363789.git.kai.huang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
svm_vm_migrate_from() uses sev_lock_vcpus_for_migration() to lock all
source and target vcpu->locks. Unfortunately there is an 8 subclass
limit, so a new subclass cannot be used for each vCPU. Instead maintain
ownership of the first vcpu's mutex.dep_map using a role specific
subclass: source vs target. Release the other vcpu's mutex.dep_maps.
Fixes: b56639318b ("KVM: SEV: Add support for SEV intra host migration")
Reported-by: John Sperbeck<jsperbeck@google.com>
Suggested-by: David Rientjes <rientjes@google.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Peter Gonda <pgonda@google.com>
Message-Id: <20220502165807.529624-1-pgonda@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Zen renumbered some of the performance counters that correspond to the
well known events in perf_hw_id. This code in KVM was never updated for
that, so guest that attempt to use counters on Zen that correspond to the
pre-Zen perf_hw_id values will silently receive the wrong values.
This has been observed in the wild with rr[0] when running in Zen 3
guests. rr uses the retired conditional branch counter 00d1 which is
incorrectly recognized by KVM as PERF_COUNT_HW_STALLED_CYCLES_BACKEND.
[0] https://rr-project.org/
Signed-off-by: Kyle Huey <me@kylehuey.com>
Message-Id: <20220503050136.86298-1-khuey@kylehuey.com>
Cc: stable@vger.kernel.org
[Check guest family, not host. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This can help identify potential performance issues when handles
AVIC incomplete IPI due vCPU not running.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220420154954.19305-3-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, an AVIC-enabled VM suffers from performance bottleneck
when scaling to large number of vCPUs for I/O intensive workloads.
In such case, a vCPU often executes halt instruction to get into idle state
waiting for interrupts, in which KVM would de-schedule the vCPU from
physical CPU.
When AVIC HW tries to deliver interrupt to the halting vCPU, it would
result in AVIC incomplete IPI #vmexit to notify KVM to reschedule
the target vCPU into running state.
Investigation has shown the main hotspot is in the kvm_apic_match_dest()
in the following call stack where it tries to find target vCPUs
corresponding to the information in the ICRH/ICRL registers.
- handle_exit
- svm_invoke_exit_handler
- avic_incomplete_ipi_interception
- kvm_apic_match_dest
However, AVIC provides hints in the #vmexit info, which can be used to
retrieve the destination guest physical APIC ID.
In addition, since QEMU defines guest physical APIC ID to be the same as
vCPU ID, it can be used to quickly identify the target vCPU to deliver IPI,
and avoid the overhead from searching through all vCPUs to match the target
vCPU.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220420154954.19305-2-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
root_role.level is always the same value as shadow_level:
- it's kvm_mmu_get_tdp_level(vcpu) when going through init_kvm_tdp_mmu
- it's the level argument when going through kvm_init_shadow_ept_mmu
- it's assigned directly from new_role.base.level when going
through shadow_mmu_init_context
Remove the duplication and get the level directly from the role.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace the per-vendor hack-a-fix for KVM's #PF => #PF => #DF workaround
with an explicit, common workaround in kvm_inject_emulated_page_fault().
Aside from being a hack, the current approach is brittle and incomplete,
e.g. nSVM's KVM_SET_NESTED_STATE fails to set ->inject_page_fault(),
and nVMX fails to apply the workaround when VMX is intercepting #PF due
to allow_smaller_maxphyaddr=1.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The TSC_AUX virtualization feature allows AMD SEV-ES guests to securely use
TSC_AUX (auxiliary time stamp counter data) in the RDTSCP and RDPID
instructions. The TSC_AUX value is set using the WRMSR instruction to the
TSC_AUX MSR (0xC0000103). It is read by the RDMSR, RDTSCP and RDPID
instructions. If the read/write of the TSC_AUX MSR is intercepted, then
RDTSCP and RDPID must also be intercepted when TSC_AUX virtualization
is present. However, the RDPID instruction can't be intercepted. This means
that when TSC_AUX virtualization is present, RDTSCP and TSC_AUX MSR
read/write must not be intercepted for SEV-ES (or SEV-SNP) guests.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Message-Id: <165040164424.1399644.13833277687385156344.stgit@bmoger-ubuntu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fixes for (relatively) old bugs, to be merged in both the -rc and next
development trees.
The merge reconciles the ABI fixes for KVM_EXIT_SYSTEM_EVENT between
5.18 and commit c24a950ec7 ("KVM, SEV: Add KVM_EXIT_SHUTDOWN metadata
for SEV-ES", 2022-04-13).
Flush the CPU caches when memory is reclaimed from an SEV guest (where
reclaim also includes it being unmapped from KVM's memslots). Due to lack
of coherency for SEV encrypted memory, failure to flush results in silent
data corruption if userspace is malicious/broken and doesn't ensure SEV
guest memory is properly pinned and unpinned.
Cache coherency is not enforced across the VM boundary in SEV (AMD APM
vol.2 Section 15.34.7). Confidential cachelines, generated by confidential
VM guests have to be explicitly flushed on the host side. If a memory page
containing dirty confidential cachelines was released by VM and reallocated
to another user, the cachelines may corrupt the new user at a later time.
KVM takes a shortcut by assuming all confidential memory remain pinned
until the end of VM lifetime. Therefore, KVM does not flush cache at
mmu_notifier invalidation events. Because of this incorrect assumption and
the lack of cache flushing, malicous userspace can crash the host kernel:
creating a malicious VM and continuously allocates/releases unpinned
confidential memory pages when the VM is running.
Add cache flush operations to mmu_notifier operations to ensure that any
physical memory leaving the guest VM get flushed. In particular, hook
mmu_notifier_invalidate_range_start and mmu_notifier_release events and
flush cache accordingly. The hook after releasing the mmu lock to avoid
contention with other vCPUs.
Cc: stable@vger.kernel.org
Suggested-by: Sean Christpherson <seanjc@google.com>
Reported-by: Mingwei Zhang <mizhang@google.com>
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Message-Id: <20220421031407.2516575-4-mizhang@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use clflush_cache_range() to flush the confidential memory when
SME_COHERENT is supported in AMD CPU. Cache flush is still needed since
SME_COHERENT only support cache invalidation at CPU side. All confidential
cache lines are still incoherent with DMA devices.
Cc: stable@vger.kerel.org
Fixes: add5e2f045 ("KVM: SVM: Add support for the SEV-ES VMSA")
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Message-Id: <20220421031407.2516575-3-mizhang@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rework sev_flush_guest_memory() to explicitly handle only a single page,
and harden it to fall back to WBINVD if VM_PAGE_FLUSH fails. Per-page
flushing is currently used only to flush the VMSA, and in its current
form, the helper is completely broken with respect to flushing actual
guest memory, i.e. won't work correctly for an arbitrary memory range.
VM_PAGE_FLUSH takes a host virtual address, and is subject to normal page
walks, i.e. will fault if the address is not present in the host page
tables or does not have the correct permissions. Current AMD CPUs also
do not honor SMAP overrides (undocumented in kernel versions of the APM),
so passing in a userspace address is completely out of the question. In
other words, KVM would need to manually walk the host page tables to get
the pfn, ensure the pfn is stable, and then use the direct map to invoke
VM_PAGE_FLUSH. And the latter might not even work, e.g. if userspace is
particularly evil/clever and backs the guest with Secret Memory (which
unmaps memory from the direct map).
Signed-off-by: Sean Christopherson <seanjc@google.com>
Fixes: add5e2f045 ("KVM: SVM: Add support for the SEV-ES VMSA")
Reported-by: Mingwei Zhang <mizhang@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Message-Id: <20220421031407.2516575-2-mizhang@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
NMI-watchdog is one of the favorite features of kernel developers,
but it does not work in AMD guest even with vPMU enabled and worse,
the system misrepresents this capability via /proc.
This is a PMC emulation error. KVM does not pass the latest valid
value to perf_event in time when guest NMI-watchdog is running, thus
the perf_event corresponding to the watchdog counter will enter the
old state at some point after the first guest NMI injection, forcing
the hardware register PMC0 to be constantly written to 0x800000000001.
Meanwhile, the running counter should accurately reflect its new value
based on the latest coordinated pmc->counter (from vPMC's point of view)
rather than the value written directly by the guest.
Fixes: 168d918f26 ("KVM: x86: Adjust counter sample period after a wrmsr")
Reported-by: Dongli Cao <caodongli@kingsoft.com>
Signed-off-by: Like Xu <likexu@tencent.com>
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Tested-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <20220409015226.38619-1-likexu@tencent.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If an SEV-ES guest requests termination, exit to userspace with
KVM_EXIT_SYSTEM_EVENT and a dedicated SEV_TERM type instead of -EINVAL
so that userspace can take appropriate action.
See AMD's GHCB spec section '4.1.13 Termination Request' for more details.
Suggested-by: Sean Christopherson <seanjc@google.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Peter Gonda <pgonda@google.com>
Reported-by: kernel test robot <lkp@intel.com>
Message-Id: <20220407210233.782250-1-pgonda@google.com>
[Add documentatino. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove WARNs that sanity check that KVM never lets a triple fault for L2
escape and incorrectly end up in L1. In normal operation, the sanity
check is perfectly valid, but it incorrectly assumes that it's impossible
for userspace to induce KVM_REQ_TRIPLE_FAULT without bouncing through
KVM_RUN (which guarantees kvm_check_nested_state() will see and handle
the triple fault).
The WARN can currently be triggered if userspace injects a machine check
while L2 is active and CR4.MCE=0. And a future fix to allow save/restore
of KVM_REQ_TRIPLE_FAULT, e.g. so that a synthesized triple fault isn't
lost on migration, will make it trivially easy for userspace to trigger
the WARN.
Clearing KVM_REQ_TRIPLE_FAULT when forcibly leaving guest mode is
tempting, but wrong, especially if/when the request is saved/restored,
e.g. if userspace restores events (including a triple fault) and then
restores nested state (which may forcibly leave guest mode). Ignoring
the fact that KVM doesn't currently provide the necessary APIs, it's
userspace's responsibility to manage pending events during save/restore.
------------[ cut here ]------------
WARNING: CPU: 7 PID: 1399 at arch/x86/kvm/vmx/nested.c:4522 nested_vmx_vmexit+0x7fe/0xd90 [kvm_intel]
Modules linked in: kvm_intel kvm irqbypass
CPU: 7 PID: 1399 Comm: state_test Not tainted 5.17.0-rc3+ #808
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:nested_vmx_vmexit+0x7fe/0xd90 [kvm_intel]
Call Trace:
<TASK>
vmx_leave_nested+0x30/0x40 [kvm_intel]
vmx_set_nested_state+0xca/0x3e0 [kvm_intel]
kvm_arch_vcpu_ioctl+0xf49/0x13e0 [kvm]
kvm_vcpu_ioctl+0x4b9/0x660 [kvm]
__x64_sys_ioctl+0x83/0xb0
do_syscall_64+0x3b/0xc0
entry_SYSCALL_64_after_hwframe+0x44/0xae
</TASK>
---[ end trace 0000000000000000 ]---
Fixes: cb6a32c2b8 ("KVM: x86: Handle triple fault in L2 without killing L1")
Cc: stable@vger.kernel.org
Cc: Chenyi Qiang <chenyi.qiang@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220407002315.78092-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The pmu_ops should be moved to kvm_x86_init_ops and tagged as __initdata.
That'll save those precious few bytes, and more importantly make
the original ops unreachable, i.e. make it harder to sneak in post-init
modification bugs.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Like Xu <likexu@tencent.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220329235054.3534728-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Merge branch for features that did not make it into 5.18:
* New ioctls to get/set TSC frequency for a whole VM
* Allow userspace to opt out of hypercall patching
Nested virtualization improvements for AMD:
* Support for "nested nested" optimizations (nested vVMLOAD/VMSAVE,
nested vGIF)
* Allow AVIC to co-exist with a nested guest running
* Fixes for LBR virtualizations when a nested guest is running,
and nested LBR virtualization support
* PAUSE filtering for nested hypervisors
Guest support:
* Decoupling of vcpu_is_preempted from PV spinlocks
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since current AVIC implementation cannot support encrypted memory,
inhibit AVIC for SEV-enabled guest.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <20220408133710.54275-1-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The save area for SEV-ES/SEV-SNP guests, as used by the hardware, is
different from the save area of a non SEV-ES/SEV-SNP guest.
This is the first step in defining the multiple save areas to keep them
separate and ensuring proper operation amongst the different types of
guests. Create an SEV-ES/SEV-SNP save area and adjust usage to the new
save area definition where needed.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Venu Busireddy <venu.busireddy@oracle.com>
Link: https://lore.kernel.org/r/20220405182743.308853-1-brijesh.singh@amd.com
The hypervisor uses the sev_features field (offset 3B0h) in the Save State
Area to control the SEV-SNP guest features such as SNPActive, vTOM,
ReflectVC etc. An SEV-SNP guest can read the sev_features field through
the SEV_STATUS MSR.
While at it, update dump_vmcb() to log the VMPL level.
See APM2 Table 15-34 and B-4 for more details.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Venu Busireddy <venu.busireddy@oracle.com>
Link: https://lore.kernel.org/r/20220307213356.2797205-2-brijesh.singh@amd.com
Add resched to avoid warning from sev_clflush_pages() with large number
of pages.
Signed-off-by: Peter Gonda <pgonda@google.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Message-Id: <20220330164306.2376085-1-pgonda@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Inhibit the AVIC of the vCPU that is running nested for the duration of the
nested run, so that all interrupts arriving from both its vCPU siblings
and from KVM are delivered using normal IPIs and cause that vCPU to vmexit.
Note that unlike normal AVIC inhibition, there is no need to
update the AVIC mmio memslot, because the nested guest uses its
own set of paging tables.
That also means that AVIC doesn't need to be inhibited VM wide.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220322174050.241850-7-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In case L1 enables vGIF for L2, the L2 cannot affect L1's GIF, regardless
of STGI/CLGI intercepts, and since VM entry enables GIF, this means
that L1's GIF is always 1 while L2 is running.
Thus in this case leave L1's vGIF in vmcb01, while letting L2
control the vGIF thus implementing nested vGIF.
Also allow KVM to toggle L1's GIF during nested entry/exit
by always using vmcb01.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220322174050.241850-5-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Expose the pause filtering and threshold in the guest CPUID
and support PAUSE filtering when possible:
- If the L0 doesn't intercept PAUSE (cpu_pm=on), then allow L1 to
have full control over PAUSE filtering.
- if the L1 doesn't intercept PAUSE, use host values and update
the adaptive count/threshold even when running nested.
- Otherwise always exit to L1; it is not really possible to merge
the fields correctly. It is expected that in this case, userspace
will not enable this feature in the guest CPUID, to avoid having the
guest update both fields pointlessly.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220322174050.241850-4-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This was tested with kvm-unit-test that was developed
for this purpose.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220322174050.241850-3-mlevitsk@redhat.com>
[Copy all of DEBUGCTL except for reserved bits. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When L2 is running without LBR virtualization, we should ensure
that L1's LBR msrs continue to update as usual.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220322174050.241850-2-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM always uses vgif when allowed, thus there is
no need to query current vmcb for it
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220322172449.235575-9-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This makes the code a bit shorter and cleaner.
No functional change intended.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220322172449.235575-4-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Clarify that this function is not used to initialize any part of
the vmcb02. No functional change intended.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use a dummy unused vmexit reason to mark the 'VM exit' that is happening
when kvm exits to handle SMM, which is not a real VM exit.
This makes it a bit easier to read the KVM trace, and avoids
other potential problems due to a stale vmexit reason in the vmcb.
If SVM_EXIT_SW somehow reaches svm_invoke_exit_handler(), instead,
svm_check_exit_valid() will return false and a WARN will be logged.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220301135526.136554-2-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Apparently on some systems AVIC is disabled in CPUID but still usable.
Allow the user to override the CPUID if the user is willing to
take the risk.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220301143650.143749-7-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This was tested by booting L1,L2,L3 (all Linux) and checking
that no VMLOAD/VMSAVE vmexits happened.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220301143650.143749-4-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It was decided that when TSC scaling is not supported,
the virtual MSR_AMD64_TSC_RATIO should still have the default '1.0'
value.
However in this case kvm_max_tsc_scaling_ratio is not set,
which breaks various assumptions.
Fix this by always calculating kvm_max_tsc_scaling_ratio regardless of
host support. For consistency, do the same for VMX.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220322172449.235575-8-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Another piece of SVM spec which should be in the header file
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220322172449.235575-6-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Due to wrong rebase, commit
4a204f7895 ("KVM: SVM: Allow AVIC support on system w/ physical APIC ID > 255")
moved avic spec #defines back to avic.c.
Move them back, and while at it extend AVIC_DOORBELL_PHYSICAL_ID_MASK to 12
bits as well (it will be used in nested avic)
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220322172449.235575-5-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
AMD EPYC CPUs never raise a #GP for a WRMSR to a PerfEvtSeln MSR. Some
reserved bits are cleared, and some are not. Specifically, on
Zen3/Milan, bits 19 and 42 are not cleared.
When emulating such a WRMSR, KVM should not synthesize a #GP,
regardless of which bits are set. However, undocumented bits should
not be passed through to the hardware MSR. So, rather than checking
for reserved bits and synthesizing a #GP, just clear the reserved
bits.
This may seem pedantic, but since KVM currently does not support the
"Host/Guest Only" bits (41:40), it is necessary to clear these bits
rather than synthesizing #GP, because some popular guests (e.g Linux)
will set the "Host Only" bit even on CPUs that don't support
EFER.SVME, and they don't expect a #GP.
For example,
root@Ubuntu1804:~# perf stat -e r26 -a sleep 1
Performance counter stats for 'system wide':
0 r26
1.001070977 seconds time elapsed
Feb 23 03:59:58 Ubuntu1804 kernel: [ 405.379957] unchecked MSR access error: WRMSR to 0xc0010200 (tried to write 0x0000020000130026) at rIP: 0xffffffff9b276a28 (native_write_msr+0x8/0x30)
Feb 23 03:59:58 Ubuntu1804 kernel: [ 405.379958] Call Trace:
Feb 23 03:59:58 Ubuntu1804 kernel: [ 405.379963] amd_pmu_disable_event+0x27/0x90
Fixes: ca724305a2 ("KVM: x86/vPMU: Implement AMD vPMU code for KVM")
Reported-by: Lotus Fenn <lotusf@google.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Like Xu <likexu@tencent.com>
Reviewed-by: David Dunn <daviddunn@google.com>
Message-Id: <20220226234131.2167175-1-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add set/clear wrappers for toggling APICv inhibits to make the call sites
more readable, and opportunistically rename the inner helpers to align
with the new wrappers and to make them more readable as well. Invert the
flag from "activate" to "set"; activate is painfully ambiguous as it's
not obvious if the inhibit is being activated, or if APICv is being
activated, in which case the inhibit is being deactivated.
For the functions that take @set, swap the order of the inhibit reason
and @set so that the call sites are visually similar to those that bounce
through the wrapper.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220311043517.17027-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use an enum for the APICv inhibit reasons, there is no meaning behind
their values and they most definitely are not "unsigned longs". Rename
the various params to "reason" for consistency and clarity (inhibit may
be confused as a command, i.e. inhibit APICv, instead of the reason that
is getting toggled/checked).
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220311043517.17027-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Include kvm_cache_regs.h to pick up the definition of is_guest_mode(),
which is referenced by nested_svm_virtualize_tpr() in svm.h. Remove
include from svm_onhpyerv.c which was done only because of lack of
include in svm.h.
Fixes: 883b0a91f4 ("KVM: SVM: Move Nested SVM Implementation to nested.c")
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Peter Gonda <pgonda@google.com>
Message-Id: <20220304161032.2270688-1-pgonda@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The third nybble of AMD's event select overlaps with Intel's IN_TX and
IN_TXCP bits. Therefore, we can't use AMD64_RAW_EVENT_MASK on Intel
platforms that support TSX.
Declare a raw_event_mask in the kvm_pmu structure, initialize it in
the vendor-specific pmu_refresh() functions, and use that mask for
PERF_TYPE_RAW configurations in reprogram_gp_counter().
Fixes: 710c476514 ("KVM: x86/pmu: Use AMD64_RAW_EVENT_MASK for PERF_TYPE_RAW")
Signed-off-by: Jim Mattson <jmattson@google.com>
Message-Id: <20220308012452.3468611-1-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM_X86_OP_OPTIONAL_RET0 can only be used with 32-bit return values on 32-bit
systems, because unsigned long is only 32-bits wide there and 64-bit values
are returned in edx:eax.
Reported-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Expand KVM's mask for the AVIC host physical ID to the full 12 bits defined
by the architecture. The number of bits consumed by hardware is model
specific, e.g. early CPUs ignored bits 11:8, but there is no way for KVM
to enumerate the "true" size. So, KVM must allow using all bits, else it
risks rejecting completely legal x2APIC IDs on newer CPUs.
This means KVM relies on hardware to not assign x2APIC IDs that exceed the
"true" width of the field, but presumably hardware is smart enough to tie
the width to the max x2APIC ID. KVM also relies on hardware to support at
least 8 bits, as the legacy xAPIC ID is writable by software. But, those
assumptions are unavoidable due to the lack of any way to enumerate the
"true" width.
Cc: stable@vger.kernel.org
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Fixes: 44a95dae1d ("KVM: x86: Detect and Initialize AVIC support")
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <20220211000851.185799-1-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Disable preemption when loading/putting the AVIC during an APICv refresh.
If the vCPU task is preempted and migrated ot a different pCPU, the
unprotected avic_vcpu_load() could set the wrong pCPU in the physical ID
cache/table.
Pull the necessary code out of avic_vcpu_{,un}blocking() and into a new
helper to reduce the probability of introducing this exact bug a third
time.
Fixes: df7e4827c5 ("KVM: SVM: call avic_vcpu_load/avic_vcpu_put when enabling/disabling AVIC")
Cc: stable@vger.kernel.org
Reported-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Exit to userspace if setup_vmgexit_scratch() fails due to OOM or because
copying data from guest (userspace) memory failed/faulted. The OOM
scenario is clearcut, it's userspace's decision as to whether it should
terminate the guest, free memory, etc...
As for -EFAULT, arguably, any guest issue is a violation of the guest's
contract with userspace, and thus userspace needs to decide how to
proceed. E.g. userspace defines what is RAM vs. MMIO and communicates
that directly to the guest, KVM is not involved in deciding what is/isn't
RAM nor in communicating that information to the guest. If the scratch
GPA doesn't resolve to a memslot, then the guest is not honoring the
memory configuration as defined by userspace.
And if userspace unmaps an hva for whatever reason, then exiting to
userspace with -EFAULT is absolutely the right thing to do. KVM's ABI
currently sucks and doesn't provide enough information to act on the
-EFAULT, but that will hopefully be remedied in the future as there are
multiple use cases, e.g. uffd and virtiofs truncation, that shouldn't
require any work in KVM beyond returning -EFAULT with a small amount of
metadata.
KVM could define its ABI such that failure to access the scratch area is
reflected into the guest, i.e. establish a contract with userspace, but
that's undesirable as it limits KVM's options in the future, e.g. in the
potential uffd case any failure on a uaccess needs to kick out to
userspace. KVM does have several cases where it reflects these errors
into the guest, e.g. kvm_pv_clock_pairing() and Hyper-V emulation, but
KVM would preferably "fix" those instead of propagating the falsehood
that any memory failure is the guest's fault.
Lastly, returning a boolean as an "error" for that a helper that isn't
named accordingly never works out well.
Fixes: ad5b353240 ("KVM: SVM: Do not terminate SEV-ES guests on GHCB validation failure")
Cc: Alper Gun <alpergun@google.com>
Cc: Peter Gonda <pgonda@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220225205209.3881130-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Don't bother rewriting the ICR value into the vAPIC page on an AVIC IPI
virtualization failure, the access is a trap, i.e. the value has already
been written to the vAPIC page. The one caveat is if hardware left the
BUSY flag set (which appears to happen somewhat arbitrarily), in which
case go through the "nodecode" APIC-write path in order to clear the BUSY
flag.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220204214205.3306634-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the common kvm_apic_write_nodecode() to handle AVIC/APIC-write traps
instead of open coding the same exact code. This will allow making the
low level lapic helpers inaccessible outside of lapic.c code.
Opportunistically clean up the params to eliminate a bunch of svm=>vcpu
reflection.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220204214205.3306634-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that __kvm_mmu_new_pgd does not look at the MMU's root_level and
shadow_root_level anymore, pull the PGD load after the initialization of
the shadow MMUs.
Besides being more intuitive, this enables future simplifications
and optimizations because it's not necessary anymore to compute the
role outside kvm_init_mmu. In particular, kvm_mmu_reset_context was not
attempting to use a cached PGD to avoid having to figure out the new role.
With this change, it could follow what nested_{vmx,svm}_load_cr3 are doing,
and avoid unloading all the cached roots.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a new capability, KVM_CAP_PMU_CAPABILITY, that takes a bitmask of
settings/features to allow userspace to configure PMU virtualization on
a per-VM basis. For now, support a single flag, KVM_PMU_CAP_DISABLE,
to allow disabling PMU virtualization for a VM even when KVM is configured
with enable_pmu=true a module level.
To keep KVM simple, disallow changing VM's PMU configuration after vCPUs
have been created.
Signed-off-by: David Dunn <daviddunn@google.com>
Message-Id: <20220223225743.2703915-2-daviddunn@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If nested tsc scaling is disabled, MSR_AMD64_TSC_RATIO should
never have non default value.
Due to way nested tsc scaling support was implmented in qemu,
it would set this msr to 0 when nested tsc scaling was disabled.
Ignore that value for now, as it causes no harm.
Fixes: 5228eb96a4 ("KVM: x86: nSVM: implement nested TSC scaling")
Cc: stable@vger.kernel.org
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220223115649.319134-1-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A few vendor callbacks are only used by VMX, but they return an integer
or bool value. Introduce KVM_X86_OP_OPTIONAL_RET0 for them: if a func is
NULL in struct kvm_x86_ops, it will be changed to __static_call_return0
when updating static calls.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All their invocations are conditional on vcpu->arch.apicv_active,
meaning that they need not be implemented by vendor code: even
though at the moment both vendors implement APIC virtualization,
all of them can be optional. In fact SVM does not need many of
them, and their implementation can be deleted now.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The two ioctls used to implement userspace-accelerated TPR,
KVM_TPR_ACCESS_REPORTING and KVM_SET_VAPIC_ADDR, are available
even if hardware-accelerated TPR can be used. So there is
no reason not to report KVM_CAP_VAPIC.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For SEV-ES VMs with mirrors to be intra-host migrated they need to be
able to migrate with the mirror. This is due to that fact that all VMSAs
need to be added into the VM with LAUNCH_UPDATE_VMSA before
lAUNCH_FINISH. Allowing migration with mirrors allows users of SEV-ES to
keep the mirror VMs VMSAs during migration.
Adds a list of mirror VMs for the original VM iterate through during its
migration. During the iteration the owner pointers can be updated from
the source to the destination. This fixes the ASID leaking issue which
caused the blocking of migration of VMs with mirrors.
Signed-off-by: Peter Gonda <pgonda@google.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Marc Orr <marcorr@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Message-Id: <20220211193634.3183388-1-pgonda@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use "avic" instead of "svm" for SVM's all of APICv hooks and make a few
additional funciton name tweaks so that the AVIC functions conform to
their associated kvm_x86_ops hooks.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220128005208.4008533-19-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If svm_deliver_avic_intr is called just after the target vcpu's AVIC got
inhibited, it might read a stale value of vcpu->arch.apicv_active
which can lead to the target vCPU not noticing the interrupt.
To fix this use load-acquire/store-release so that, if the target vCPU
is IN_GUEST_MODE, we're guaranteed to see a previous disabling of the
AVIC. If AVIC has been disabled in the meanwhile, proceed with the
KVM_REQ_EVENT-based delivery.
Incomplete IPI vmexit has the same races as svm_deliver_avic_intr, and
in fact it can be handled in exactly the same way; the only difference
lies in who has set IRR, whether svm_deliver_interrupt or the processor.
Therefore, svm_complete_interrupt_delivery can be used to fix incomplete
IPI vmexits as well.
Co-developed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SVM has to set IRR for both the AVIC and the software-LAPIC case,
so pull it up to the common function that handles both configurations.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The check on the current CPU adds an extra level of indentation to
svm_deliver_avic_intr and conflates documentation on what happens
if the vCPU exits (of interest to svm_deliver_avic_intr) and migrates
(only of interest to avic_ring_doorbell, which calls get/put_cpu()).
Extract the wrmsr to a separate function and rewrite the
comment in svm_deliver_avic_intr().
Co-developed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Similar to nVMX commit 502d2bf5f2 ("KVM: nVMX: Implement Enlightened MSR
Bitmap feature"), add support for the feature for nSVM (Hyper-V on KVM).
Notable differences from nVMX implementation:
- As the feature uses SW reserved fields in VMCB control, KVM needs to
make sure it's dealing with a Hyper-V guest (kvm_hv_hypercall_enabled()).
- 'msrpm_base_pa' needs to be always be overwritten in
nested_svm_vmrun_msrpm(), even when the update is skipped. As an
optimization, nested_vmcb02_prepare_control() copies it from VMCB01
so when MSR-Bitmap feature for L2 is disabled nothing needs to be done.
- 'struct vmcb_ctrl_area_cached' needs to be extended with clean
fields/sw reserved data and __nested_copy_vmcb_control_to_cache() needs to
copy it so nested_svm_vmrun_msrpm() can use it later.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220202095100.129834-5-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In preparation to implementing Enlightened MSR-Bitmap feature for Hyper-V
on KVM, split off the required definitions into common 'svm/hyperv.h'
header.
No functional change intended.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220202095100.129834-4-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Similar to nVMX commit ed2a4800ae ("KVM: nVMX: Track whether changes in
L0 require MSR bitmap for L2 to be rebuilt"), introduce a flag to keep
track of whether MSR bitmap for L2 needs to be rebuilt due to changes in
MSR bitmap for L1 or switching to a different L2.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220202095100.129834-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Massage SVM's implementation names that still diverge from kvm_x86_ops to
allow for wiring up all SVM-defined functions via kvm-x86-ops.h.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220128005208.4008533-22-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename svm_vm_copy_asid_from() and svm_vm_migrate_from() to conform to
the names used by kvm_x86_ops, and opportunistically use "sev" instead of
"svm" to more precisely identify the role of the hooks.
svm_vm_copy_asid_from() in particular was poorly named as the function
does much more than simply copy the ASID.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220128005208.4008533-21-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use slightly more verbose names for the so called "memory encrypt",
a.k.a. "mem enc", kvm_x86_ops hooks to bridge the gap between the current
super short kvm_x86_ops names and SVM's more verbose, but non-conforming
names. This is a step toward using kvm-x86-ops.h with KVM_X86_CVM_OP()
to fill svm_x86_ops.
Opportunistically rename mem_enc_op() to mem_enc_ioctl() to better
reflect its true nature, as it really is a full fledged ioctl() of its
own. Ideally, the hook would be named confidential_vm_ioctl() or so, as
the ioctl() is a gateway to more than just memory encryption, and because
its underlying purpose to support Confidential VMs, which can be provided
without memory encryption, e.g. if the TCB of the guest includes the host
kernel but not host userspace, or by isolation in hardware without
encrypting memory. But, diverging from KVM_MEMORY_ENCRYPT_OP even
further is undeseriable, and short of creating alises for all related
ioctl()s, which introduces a different flavor of divergence, KVM is stuck
with the nomenclature.
Defer renaming SVM's functions to a future commit as there are additional
changes needed to make SVM fully conforming and to match reality (looking
at you, svm_vm_copy_asid_from()).
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220128005208.4008533-20-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove SVM's MAX_INST_SIZE, which has long since been obsoleted by the
common MAX_INSN_SIZE. Note, the latter's "insn" is also the generally
preferred abbreviation of instruction.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220128005208.4008533-18-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename svm_flush_tlb() to svm_flush_tlb_current() so that at least one of
the flushing operations in svm_x86_ops can be filled via kvm-x86-ops.h,
and to document the scope of the flush (specifically that it doesn't
flush "all").
Opportunistically make svm_tlb_flush_current(), was svm_flush_tlb(),
static.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220128005208.4008533-17-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move kvm_get_cs_db_l_bits() to SVM and rename it appropriately so that
its svm_x86_ops entry can be filled via kvm-x86-ops, and to eliminate a
superfluous export from KVM x86.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220128005208.4008533-16-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename a variety of kvm_x86_op function pointers so that preferred name
for vendor implementations follows the pattern <vendor>_<function>, e.g.
rename .run() to .vcpu_run() to match {svm,vmx}_vcpu_run(). This will
allow vendor implementations to be wired up via the KVM_X86_OP macro.
In many cases, VMX and SVM "disagree" on the preferred name, though in
reality it's VMX and x86 that disagree as SVM blindly prepended _svm to
the kvm_x86_ops name. Justification for using the VMX nomenclature:
- set_{irq,nmi} => inject_{irq,nmi} because the helper is injecting an
event that has already been "set" in e.g. the vIRR. SVM's relevant
VMCB field is even named event_inj, and KVM's stat is irq_injections.
- prepare_guest_switch => prepare_switch_to_guest because the former is
ambiguous, e.g. it could mean switching between multiple guests,
switching from the guest to host, etc...
- update_pi_irte => pi_update_irte to allow for matching match the rest
of VMX's posted interrupt naming scheme, which is vmx_pi_<blah>().
- start_assignment => pi_start_assignment to again follow VMX's posted
interrupt naming scheme, and to provide context for what bit of code
might care about an otherwise undescribed "assignment".
The "tlb_flush" => "flush_tlb" creates an inconsistency with respect to
Hyper-V's "tlb_remote_flush" hooks, but Hyper-V really is the one that's
wrong. x86, VMX, and SVM all use flush_tlb, and even common KVM is on a
variant of the bandwagon with "kvm_flush_remote_tlbs", e.g. a more
appropriate name for the Hyper-V hooks would be flush_remote_tlbs. Leave
that change for another time as the Hyper-V hooks always start as NULL,
i.e. the name doesn't matter for using kvm-x86-ops.h, and changing all
names requires an astounding amount of churn.
VMX and SVM function names are intentionally left as is to minimize the
diff. Both VMX and SVM will need to rename even more functions in order
to fully utilize KVM_X86_OPS, i.e. an additional patch for each is
inevitable.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220128005208.4008533-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM performs the VMSAVE to the host save area for both regular and SEV-ES
guests, so hoist it up to svm_prepare_guest_switch. And because
sev_es_prepare_guest_switch does not really need to know the details
of struct svm_cpu_data *, just pass it the pointer to the host save area
inside the HSAVE page.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The "struct kvm_vcpu *vcpu" parameter of svm_check_exit_valid()
is not used, so remove it. No functional change intended.
Signed-off-by: Jinrong Liang <cloudliang@tencent.com>
Message-Id: <20220125095909.38122-7-cloudliang@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
asm/svm.h is the correct place for all values that are defined in
the SVM spec, and that includes AVIC.
Also add some values from the spec that were not defined before
and will be soon useful.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220207155447.840194-10-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix a corner case in which the L1 hypervisor intercepts
interrupts (INTERCEPT_INTR) and either doesn't set
virtual interrupt masking (V_INTR_MASKING) or enters a
nested guest with EFLAGS.IF disabled prior to the entry.
In this case, despite the fact that L1 intercepts the interrupts,
KVM still needs to set up an interrupt window to wait before
injecting the INTR vmexit.
Currently the KVM instead enters an endless loop of 'req_immediate_exit'.
Exactly the same issue also happens for SMIs and NMI.
Fix this as well.
Note that on VMX, this case is impossible as there is only
'vmexit on external interrupts' execution control which either set,
in which case both host and guest's EFLAGS.IF
are ignored, or not set, in which case no VMexits are delivered.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220207155447.840194-8-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM already honours few clean bits thus it makes sense
to let the nested guest know about it.
Note that KVM also doesn't check if the hardware supports
clean bits, and therefore nested KVM was
already setting clean bits and L0 KVM
was already honouring them.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220207155447.840194-6-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While RSM induced VM entries are not full VM entries,
they still need to be followed by actual VM entry to complete it,
unlike setting the nested state.
This patch fixes boot of hyperv and SMM enabled
windows VM running nested on KVM, which fail due
to this issue combined with lack of dirty bit setting.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Cc: stable@vger.kernel.org
Message-Id: <20220207155447.840194-5-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While usually, restoring the smm state makes the KVM enter
the nested guest thus a different vmcb (vmcb02 vs vmcb01),
KVM should still mark it as dirty, since hardware
can in theory cache multiple vmcbs.
Failure to do so, combined with lack of setting the
nested_run_pending (which is fixed in the next patch),
might make KVM re-enter vmcb01, which was just exited from,
with completely different set of guest state registers
(SMM vs non SMM) and without proper dirty bits set,
which results in the CPU reusing stale IDTR pointer
which leads to a guest shutdown on any interrupt.
On the real hardware this usually doesn't happen,
but when running nested, L0's KVM does check and
honour few dirty bits, causing this issue to happen.
This patch fixes boot of hyperv and SMM enabled
windows VM running nested on KVM.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Cc: stable@vger.kernel.org
Message-Id: <20220207155447.840194-4-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Turns out that due to review feedback and/or rebases
I accidentally moved the call to nested_svm_load_cr3 to be too early,
before the NPT is enabled, which is very wrong to do.
KVM can't even access guest memory at that point as nested NPT
is needed for that, and of course it won't initialize the walk_mmu,
which is main issue the patch was addressing.
Fix this for real.
Fixes: 232f75d3b4 ("KVM: nSVM: call nested_svm_load_cr3 on nested state load")
Cc: stable@vger.kernel.org
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220207155447.840194-3-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When the guest doesn't enable paging, and NPT/EPT is disabled, we
use guest't paging CR3's as KVM's shadow paging pointer and
we are technically in direct mode as if we were to use NPT/EPT.
In direct mode we create SPTEs with user mode permissions
because usually in the direct mode the NPT/EPT doesn't
need to restrict access based on guest CPL
(there are MBE/GMET extenstions for that but KVM doesn't use them).
In this special "use guest paging as direct" mode however,
and if CR4.SMAP/CR4.SMEP are enabled, that will make the CPU
fault on each access and KVM will enter endless loop of page faults.
Since page protection doesn't have any meaning in !PG case,
just don't passthrough these bits.
The fix is the same as was done for VMX in commit:
commit 656ec4a492 ("KVM: VMX: fix SMEP and SMAP without EPT")
This fixes the boot of windows 10 without NPT for good.
(Without this patch, BSP boots, but APs were stuck in endless
loop of page faults, causing the VM boot with 1 CPU)
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Cc: stable@vger.kernel.org
Message-Id: <20220207155447.840194-2-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove a WARN on an "AVIC IPI invalid target" exit, the WARN is trivial
to trigger from guest as it will fail on any destination APIC ID that
doesn't exist from the guest's perspective.
Don't bother recording anything in the kernel log, the common tracepoint
for kvm_avic_incomplete_ipi() is sufficient for debugging.
This reverts commit 37ef0c4414.
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220204214205.3306634-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- A couple of fixes when handling an exception while a SError has been
delivered
- Workaround for Cortex-A510's single-step[ erratum
-----BEGIN PGP SIGNATURE-----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=Mbx/
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 5.17, take #2
- A couple of fixes when handling an exception while a SError has been
delivered
- Workaround for Cortex-A510's single-step[ erratum
For consistency and clarity, migrate x86 over to the generic helpers for
guest timing and lockdep/RCU/tracing management, and remove the
x86-specific helpers.
Prior to this patch, the guest timing was entered in
kvm_guest_enter_irqoff() (called by svm_vcpu_enter_exit() and
svm_vcpu_enter_exit()), and was exited by the call to
vtime_account_guest_exit() within vcpu_enter_guest().
To minimize duplication and to more clearly balance entry and exit, both
entry and exit of guest timing are placed in vcpu_enter_guest(), using
the new guest_timing_{enter,exit}_irqoff() helpers. When context
tracking is used a small amount of additional time will be accounted
towards guests; tick-based accounting is unnaffected as IRQs are
disabled at this point and not enabled until after the return from the
guest.
This also corrects (benign) mis-balanced context tracking accounting
introduced in commits:
ae95f566b3 ("KVM: X86: TSCDEADLINE MSR emulation fastpath")
26efe2fd92 ("KVM: VMX: Handle preemption timer fastpath")
Where KVM can enter a guest multiple times, calling vtime_guest_enter()
without a corresponding call to vtime_account_guest_exit(), and with
vtime_account_system() called when vtime_account_guest() should be used.
As account_system_time() checks PF_VCPU and calls account_guest_time(),
this doesn't result in any functional problem, but is unnecessarily
confusing.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jim Mattson <jmattson@google.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <20220201132926.3301912-4-mark.rutland@arm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Handle non-APICv interrupt delivery in vendor code, even though it means
VMX and SVM will temporarily have duplicate code. SVM's AVIC has a race
condition that requires KVM to fall back to legacy interrupt injection
_after_ the interrupt has been logged in the vIRR, i.e. to fix the race,
SVM will need to open code the full flow anyways[*]. Refactor the code
so that the SVM bug without introducing other issues, e.g. SVM would
return "success" and thus invoke trace_kvm_apicv_accept_irq() even when
delivery through the AVIC failed, and to opportunistically prepare for
using KVM_X86_OP to fill each vendor's kvm_x86_ops struct, which will
rely on the vendor function matching the kvm_x86_op pointer name.
No functional change intended.
[*] https://lore.kernel.org/all/20211213104634.199141-4-mlevitsk@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220128005208.4008533-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Redo incorrect fix for SEV/SMAP erratum
* Windows 11 Hyper-V workaround
Other x86 changes:
* Various x86 cleanups
* Re-enable access_tracking_perf_test
* Fix for #GP handling on SVM
* Fix for CPUID leaf 0Dh in KVM_GET_SUPPORTED_CPUID
* Fix for ICEBP in interrupt shadow
* Avoid false-positive RCU splat
* Enable Enlightened MSR-Bitmap support for real
ARM:
* Correctly update the shadow register on exception injection when
running in nVHE mode
* Correctly use the mm_ops indirection when performing cache invalidation
from the page-table walker
* Restrict the vgic-v3 workaround for SEIS to the two known broken
implementations
Generic code changes:
* Dead code cleanup
There will be another pull request for ARM fixes next week, but
those patches need a bit more soak time.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmHz5eIUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNv4wgAopj0Zlutrrtw3KT4/XnmSdMPgN0j
jQNzysSLTO5wGQCEogycjYXkGUDFu1Gdi+K91QAyjeKja20pIhPLeS2CBDRJyOc5
73K7sxqz51JnQiVFzkTuA+qzn+lXaJ9LUXtdg8BnQMSKyt2AJOqE8uT10kcYOD5q
mW4V3QUA0QpVKN0cYHv/G/zvBwQGGSLZetFbuAzwH2EDTpIi1aio5ZN1r0AoH18L
2x5kYPpqmnoBvo2cB4b7SNmxv3ZPQ5K+wta0uwZ4pO+UuYiRd84RPr5lErywJC3w
nci0eC0DoXrC6h+35UItqM8RqAGv6LADbDnr1RGojmfogSD0OtbX8y3hjw==
=iKnI
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Two larger x86 series:
- Redo incorrect fix for SEV/SMAP erratum
- Windows 11 Hyper-V workaround
Other x86 changes:
- Various x86 cleanups
- Re-enable access_tracking_perf_test
- Fix for #GP handling on SVM
- Fix for CPUID leaf 0Dh in KVM_GET_SUPPORTED_CPUID
- Fix for ICEBP in interrupt shadow
- Avoid false-positive RCU splat
- Enable Enlightened MSR-Bitmap support for real
ARM:
- Correctly update the shadow register on exception injection when
running in nVHE mode
- Correctly use the mm_ops indirection when performing cache
invalidation from the page-table walker
- Restrict the vgic-v3 workaround for SEIS to the two known broken
implementations
Generic code changes:
- Dead code cleanup"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (43 commits)
KVM: eventfd: Fix false positive RCU usage warning
KVM: nVMX: Allow VMREAD when Enlightened VMCS is in use
KVM: nVMX: Implement evmcs_field_offset() suitable for handle_vmread()
KVM: nVMX: Rename vmcs_to_field_offset{,_table}
KVM: nVMX: eVMCS: Filter out VM_EXIT_SAVE_VMX_PREEMPTION_TIMER
KVM: nVMX: Also filter MSR_IA32_VMX_TRUE_PINBASED_CTLS when eVMCS
selftests: kvm: check dynamic bits against KVM_X86_XCOMP_GUEST_SUPP
KVM: x86: add system attribute to retrieve full set of supported xsave states
KVM: x86: Add a helper to retrieve userspace address from kvm_device_attr
selftests: kvm: move vm_xsave_req_perm call to amx_test
KVM: x86: Sync the states size with the XCR0/IA32_XSS at, any time
KVM: x86: Update vCPU's runtime CPUID on write to MSR_IA32_XSS
KVM: x86: Keep MSR_IA32_XSS unchanged for INIT
KVM: x86: Free kvm_cpuid_entry2 array on post-KVM_RUN KVM_SET_CPUID{,2}
KVM: nVMX: WARN on any attempt to allocate shadow VMCS for vmcs02
KVM: selftests: Don't skip L2's VMCALL in SMM test for SVM guest
KVM: x86: Check .flags in kvm_cpuid_check_equal() too
KVM: x86: Forcibly leave nested virt when SMM state is toggled
KVM: SVM: drop unnecessary code in svm_hv_vmcb_dirty_nested_enlightenments()
KVM: SVM: hyper-v: Enable Enlightened MSR-Bitmap support for real
...
Forcibly leave nested virtualization operation if userspace toggles SMM
state via KVM_SET_VCPU_EVENTS or KVM_SYNC_X86_EVENTS. If userspace
forces the vCPU out of SMM while it's post-VMXON and then injects an SMI,
vmx_enter_smm() will overwrite vmx->nested.smm.vmxon and end up with both
vmxon=false and smm.vmxon=false, but all other nVMX state allocated.
Don't attempt to gracefully handle the transition as (a) most transitions
are nonsencial, e.g. forcing SMM while L2 is running, (b) there isn't
sufficient information to handle all transitions, e.g. SVM wants access
to the SMRAM save state, and (c) KVM_SET_VCPU_EVENTS must precede
KVM_SET_NESTED_STATE during state restore as the latter disallows putting
the vCPU into L2 if SMM is active, and disallows tagging the vCPU as
being post-VMXON in SMM if SMM is not active.
Abuse of KVM_SET_VCPU_EVENTS manifests as a WARN and memory leak in nVMX
due to failure to free vmcs01's shadow VMCS, but the bug goes far beyond
just a memory leak, e.g. toggling SMM on while L2 is active puts the vCPU
in an architecturally impossible state.
WARNING: CPU: 0 PID: 3606 at free_loaded_vmcs arch/x86/kvm/vmx/vmx.c:2665 [inline]
WARNING: CPU: 0 PID: 3606 at free_loaded_vmcs+0x158/0x1a0 arch/x86/kvm/vmx/vmx.c:2656
Modules linked in:
CPU: 1 PID: 3606 Comm: syz-executor725 Not tainted 5.17.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:free_loaded_vmcs arch/x86/kvm/vmx/vmx.c:2665 [inline]
RIP: 0010:free_loaded_vmcs+0x158/0x1a0 arch/x86/kvm/vmx/vmx.c:2656
Code: <0f> 0b eb b3 e8 8f 4d 9f 00 e9 f7 fe ff ff 48 89 df e8 92 4d 9f 00
Call Trace:
<TASK>
kvm_arch_vcpu_destroy+0x72/0x2f0 arch/x86/kvm/x86.c:11123
kvm_vcpu_destroy arch/x86/kvm/../../../virt/kvm/kvm_main.c:441 [inline]
kvm_destroy_vcpus+0x11f/0x290 arch/x86/kvm/../../../virt/kvm/kvm_main.c:460
kvm_free_vcpus arch/x86/kvm/x86.c:11564 [inline]
kvm_arch_destroy_vm+0x2e8/0x470 arch/x86/kvm/x86.c:11676
kvm_destroy_vm arch/x86/kvm/../../../virt/kvm/kvm_main.c:1217 [inline]
kvm_put_kvm+0x4fa/0xb00 arch/x86/kvm/../../../virt/kvm/kvm_main.c:1250
kvm_vm_release+0x3f/0x50 arch/x86/kvm/../../../virt/kvm/kvm_main.c:1273
__fput+0x286/0x9f0 fs/file_table.c:311
task_work_run+0xdd/0x1a0 kernel/task_work.c:164
exit_task_work include/linux/task_work.h:32 [inline]
do_exit+0xb29/0x2a30 kernel/exit.c:806
do_group_exit+0xd2/0x2f0 kernel/exit.c:935
get_signal+0x4b0/0x28c0 kernel/signal.c:2862
arch_do_signal_or_restart+0x2a9/0x1c40 arch/x86/kernel/signal.c:868
handle_signal_work kernel/entry/common.c:148 [inline]
exit_to_user_mode_loop kernel/entry/common.c:172 [inline]
exit_to_user_mode_prepare+0x17d/0x290 kernel/entry/common.c:207
__syscall_exit_to_user_mode_work kernel/entry/common.c:289 [inline]
syscall_exit_to_user_mode+0x19/0x60 kernel/entry/common.c:300
do_syscall_64+0x42/0xb0 arch/x86/entry/common.c:86
entry_SYSCALL_64_after_hwframe+0x44/0xae
</TASK>
Cc: stable@vger.kernel.org
Reported-by: syzbot+8112db3ab20e70d50c31@syzkaller.appspotmail.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220125220358.2091737-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 3fa5e8fd0a ("KVM: SVM: delay svm_vcpu_init_msrpm after
svm->vmcb is initialized") re-arranged svm_vcpu_init_msrpm() call in
svm_create_vcpu(), thus making the comment about vmcb being NULL
obsolete. Drop it.
While on it, drop superfluous vmcb_is_clean() check: vmcb_mark_dirty()
is a bit flip, an extra check is unlikely to bring any performance gain.
Drop now-unneeded vmcb_is_clean() helper as well.
Fixes: 3fa5e8fd0a ("KVM: SVM: delay svm_vcpu_init_msrpm after svm->vmcb is initialized")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20211220152139.418372-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit c4327f15df ("KVM: SVM: hyper-v: Enlightened MSR-Bitmap support")
introduced enlightened MSR-Bitmap support for KVM-on-Hyper-V but it didn't
actually enable the support. Similar to enlightened NPT TLB flush and
direct TLB flush features, the guest (KVM) has to tell L0 (Hyper-V) that
it's using the feature by setting the appropriate feature fit in VMCB
control area (sw reserved fields).
Fixes: c4327f15df ("KVM: SVM: hyper-v: Enlightened MSR-Bitmap support")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20211220152139.418372-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Inject a #GP instead of synthesizing triple fault to try to avoid killing
the guest if emulation of an SEV guest fails due to encountering the SMAP
erratum. The injected #GP may still be fatal to the guest, e.g. if the
userspace process is providing critical functionality, but KVM should
make every attempt to keep the guest alive.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Message-Id: <20220120010719.711476-10-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Resume the guest instead of synthesizing a triple fault shutdown if the
instruction bytes buffer is empty due to the #NPF being on the code fetch
itself or on a page table access. The SMAP errata applies if and only if
the code fetch was successful and ucode's subsequent data read from the
code page encountered a SMAP violation. In practice, the guest is likely
hosed either way, but crashing the guest on a code fetch to emulated MMIO
is technically wrong according to the behavior described in the APM.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Message-Id: <20220120010719.711476-9-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Inject #UD if KVM attempts emulation for an SEV guests without an insn
buffer and instruction decoding is required. The previous behavior of
allowing emulation if there is no insn buffer is undesirable as doing so
means KVM is reading guest private memory and thus decoding cyphertext,
i.e. is emulating garbage. The check was previously necessary as the
emulation type was not provided, i.e. SVM needed to allow emulation to
handle completion of emulation after exiting to userspace to handle I/O.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Message-Id: <20220120010719.711476-8-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
WARN if KVM attempts to emulate in response to #UD or #GP for SEV guests,
i.e. if KVM intercepts #UD or #GP, as emulation on any fault except #NPF
is impossible since KVM cannot read guest private memory to get the code
stream, and the CPU's DecodeAssists feature only provides the instruction
bytes on #NPF.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Message-Id: <20220120010719.711476-7-seanjc@google.com>
[Warn on EMULTYPE_TRAP_UD_FORCED according to Liam Merwick's review. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pass the emulation type to kvm_x86_ops.can_emulate_insutrction() so that
a future commit can harden KVM's SEV support to WARN on emulation
scenarios that should never happen.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Message-Id: <20220120010719.711476-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a sanity check on DECODEASSIST being support if SEV is supported, as
KVM cannot read guest private memory and thus relies on the CPU to
provide the instruction byte stream on #NPF for emulation. The intent of
the check is to document the dependency, it should never fail in practice
as producing hardware that supports SEV but not DECODEASSISTS would be
non-sensical.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Message-Id: <20220120010719.711476-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Never intercept #GP for SEV guests as reading SEV guest private memory
will return cyphertext, i.e. emulating on #GP can't work as intended.
Cc: stable@vger.kernel.org
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Message-Id: <20220120010719.711476-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Revert a completely broken check on an "invalid" RIP in SVM's workaround
for the DecodeAssists SMAP errata. kvm_vcpu_gfn_to_memslot() obviously
expects a gfn, i.e. operates in the guest physical address space, whereas
RIP is a virtual (not even linear) address. The "fix" worked for the
problematic KVM selftest because the test identity mapped RIP.
Fully revert the hack instead of trying to translate RIP to a GPA, as the
non-SEV case is now handled earlier, and KVM cannot access guest page
tables to translate RIP.
This reverts commit e72436bc3a.
Fixes: e72436bc3a ("KVM: SVM: avoid infinite loop on NPF from bad address")
Reported-by: Liam Merwick <liam.merwick@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Message-Id: <20220120010719.711476-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Always signal that emulation is possible for !SEV guests regardless of
whether or not the CPU provided a valid instruction byte stream. KVM can
read all guest state (memory and registers) for !SEV guests, i.e. can
fetch the code stream from memory even if the CPU failed to do so because
of the SMAP errata.
Fixes: 05d5a48635 ("KVM: SVM: Workaround errata#1096 (insn_len maybe zero on SMAP violation)")
Cc: stable@vger.kernel.org
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Message-Id: <20220120010719.711476-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The bug occurs on #GP triggered by VMware backdoor when eax value is
unaligned. eax alignment check should not be applied to non-SVM
instructions because it leads to incorrect omission of the instructions
emulation.
Apply the alignment check only to SVM instructions to fix.
Fixes: d1cba6c922 ("KVM: x86: nSVM: test eax for 4K alignment for GP errata workaround")
Signed-off-by: Denis Valeev <lemniscattaden@gmail.com>
Message-Id: <Yexlhaoe1Fscm59u@q>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- selftest compilation fix for non-x86
- KVM: avoid warning on s390 in mark_page_dirty
x86:
- fix page write-protection bug and improve comments
- use binary search to lookup the PMU event filter, add test
- enable_pmu module parameter support for Intel CPUs
- switch blocked_vcpu_on_cpu_lock to raw spinlock
- cleanups of blocked vCPU logic
- partially allow KVM_SET_CPUID{,2} after KVM_RUN (5.16 regression)
- various small fixes
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmHpmT0UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOstggAi1VSpT43oGslQjXNDZacHEARoYQs
b0XpoW7HXicGSGRMWspCmiAPdJyYTsioEACttAmXUMs7brAgHb9n/vzdlcLh1ymL
rQw2YFQlfqqB1Ki1iRhNkWlH9xOECsu28WLng6ylrx51GuT/pzWRt+V3EGUFTxIT
ldW9HgZg2oFJIaLjg2hQVR/8EbBf0QdsAD3KV3tyvhBlXPkyeLOMcGe9onfjZ/NE
JQeW7FtKtP4SsIFt1KrJpDPjtiwFt3bRM0gfgGw7//clvtKIqt1LYXZiq4C3b7f5
tfYiC8lO2vnOoYcfeYEmvybbSsoS/CgSliZB32qkwoVvRMIl82YmxtDD+Q==
=/Mak
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull more kvm updates from Paolo Bonzini:
"Generic:
- selftest compilation fix for non-x86
- KVM: avoid warning on s390 in mark_page_dirty
x86:
- fix page write-protection bug and improve comments
- use binary search to lookup the PMU event filter, add test
- enable_pmu module parameter support for Intel CPUs
- switch blocked_vcpu_on_cpu_lock to raw spinlock
- cleanups of blocked vCPU logic
- partially allow KVM_SET_CPUID{,2} after KVM_RUN (5.16 regression)
- various small fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (46 commits)
docs: kvm: fix WARNINGs from api.rst
selftests: kvm/x86: Fix the warning in lib/x86_64/processor.c
selftests: kvm/x86: Fix the warning in pmu_event_filter_test.c
kvm: selftests: Do not indent with spaces
kvm: selftests: sync uapi/linux/kvm.h with Linux header
selftests: kvm: add amx_test to .gitignore
KVM: SVM: Nullify vcpu_(un)blocking() hooks if AVIC is disabled
KVM: SVM: Move svm_hardware_setup() and its helpers below svm_x86_ops
KVM: SVM: Drop AVIC's intermediate avic_set_running() helper
KVM: VMX: Don't do full kick when handling posted interrupt wakeup
KVM: VMX: Fold fallback path into triggering posted IRQ helper
KVM: VMX: Pass desired vector instead of bool for triggering posted IRQ
KVM: VMX: Don't do full kick when triggering posted interrupt "fails"
KVM: SVM: Skip AVIC and IRTE updates when loading blocking vCPU
KVM: SVM: Use kvm_vcpu_is_blocking() in AVIC load to handle preemption
KVM: SVM: Remove unnecessary APICv/AVIC update in vCPU unblocking path
KVM: SVM: Don't bother checking for "running" AVIC when kicking for IPIs
KVM: SVM: Signal AVIC doorbell iff vCPU is in guest mode
KVM: x86: Remove defunct pre_block/post_block kvm_x86_ops hooks
KVM: x86: Unexport LAPIC's switch_to_{hv,sw}_timer() helpers
...
Nullify svm_x86_ops.vcpu_(un)blocking if AVIC/APICv is disabled as the
hooks are necessary only to clear the vCPU's IsRunning entry in the
Physical APIC and to update IRTE entries if the VM has a pass-through
device attached.
Opportunistically rename the helpers to clarify their AVIC relationship.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211208015236.1616697-24-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move svm_hardware_setup() below svm_x86_ops so that KVM can modify ops
during setup, e.g. the vcpu_(un)blocking hooks can be nullified if AVIC
is disabled or unsupported.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211208015236.1616697-23-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop avic_set_running() in favor of calling avic_vcpu_{load,put}()
directly, and modify the block+put path to use preempt_disable/enable()
instead of get/put_cpu(), as it doesn't actually care about the current
pCPU associated with the vCPU. Opportunistically add lockdep assertions
as being preempted in avic_vcpu_put() would lead to consuming stale data,
even though doing so _in the current code base_ would not be fatal.
Add a much needed comment explaining why svm_vcpu_blocking() needs to
unload the AVIC and update the IRTE _before_ the vCPU starts blocking.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211208015236.1616697-22-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Don't bother updating the Physical APIC table or IRTE when loading a vCPU
that is blocking, i.e. won't be marked IsRun{ning}=1, as the pCPU is
queried if and only if IsRunning is '1'. If the vCPU was migrated, the
new pCPU will be picked up when avic_vcpu_load() is called by
svm_vcpu_unblocking().
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211208015236.1616697-15-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use kvm_vcpu_is_blocking() to determine whether or not the vCPU should be
marked running during avic_vcpu_load(). Drop avic_is_running, which
really should have been named "vcpu_is_not_blocking", as it tracked if
the vCPU was blocking, not if it was actually running, e.g. it was set
during svm_create_vcpu() when the vCPU was obviously not running.
This is technically a teeny tiny functional change, as the vCPU will be
marked IsRunning=1 on being reloaded if the vCPU is preempted between
svm_vcpu_blocking() and prepare_to_rcuwait(). But that's a benign change
as the vCPU will be marked IsRunning=0 when KVM voluntarily schedules out
the vCPU.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211208015236.1616697-14-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove handling of KVM_REQ_APICV_UPDATE from svm_vcpu_unblocking(), it's
no longer needed as it was made obsolete by commit df7e4827c5 ("KVM:
SVM: call avic_vcpu_load/avic_vcpu_put when enabling/disabling AVIC").
Prior to that commit, the manual check was necessary to ensure the AVIC
stuff was updated by avic_set_running() when a request to enable APICv
became pending while the vCPU was blocking, as the request handling
itself would not do the update. But, as evidenced by the commit, that
logic was flawed and subject to various races.
Now that svm_refresh_apicv_exec_ctrl() does avic_vcpu_load/put() in
response to an APICv status change, drop the manual check in the
unblocking path.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211208015236.1616697-13-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop the avic_vcpu_is_running() check when waking vCPUs in response to a
VM-Exit due to incomplete IPI delivery. The check isn't wrong per se, but
it's not 100% accurate in the sense that it doesn't guarantee that the vCPU
was one of the vCPUs that didn't receive the IPI.
The check isn't required for correctness as blocking == !running in this
context.
From a performance perspective, waking a live task is not expensive as the
only moderately costly operation is a locked operation to temporarily
disable preemption. And if that is indeed a performance issue,
kvm_vcpu_is_blocking() would be a better check than poking into the AVIC.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20211208015236.1616697-12-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signal the AVIC doorbell iff the vCPU is running in the guest. If the vCPU
is not IN_GUEST_MODE, it's guaranteed to pick up any pending IRQs on the
next VMRUN, which unconditionally processes the vIRR.
Add comments to document the logic.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211208015236.1616697-11-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
