If snp_guest_req_init() fails, return the provided error code up the
stack to userspace, e.g. so that userspace can log that KVM_SEV_INIT2
failed, as opposed to some random operation later in VM setup failing
because SNP wasn't actually enabled for the VM.
Note, KVM itself doesn't consult the return value from __sev_guest_init(),
i.e. the fallout is purely that userspace may be confused.
Fixes: 88caf544c9 ("KVM: SEV: Provide support for SNP_GUEST_REQUEST NAE event")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202410192220.MeTyHPxI-lkp@intel.com
Link: https://lore.kernel.org/r/20241031203214.1585751-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
fdget() is the first thing done in scope, all matching fdput() are
immediately followed by leaving the scope.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Add a quirk to control KVM's misguided initialization of select feature
MSRs to KVM's max configuration, as enabling features by default violates
KVM's approach of letting userspace own the vCPU model, and is actively
problematic for MSRs that are conditionally supported, as the vCPU will
end up with an MSR value that userspace can't restore. E.g. if the vCPU
is configured with PDCM=0, userspace will save and attempt to restore a
non-zero PERF_CAPABILITIES, thanks to KVM's meddling.
Link: https://lore.kernel.org/r/20240802185511.305849-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
When querying guest CPL to determine if a vCPU was preempted while in
kernel mode, bypass the register cache, i.e. always read SS.AR_BYTES from
the VMCS on Intel CPUs. If the kernel is running with full preemption
enabled, using the register cache in the preemption path can result in
stale and/or uninitialized data being cached in the segment cache.
In particular the following scenario is currently possible:
- vCPU is just created, and the vCPU thread is preempted before
SS.AR_BYTES is written in vmx_vcpu_reset().
- When scheduling out the vCPU task, kvm_arch_vcpu_in_kernel() =>
vmx_get_cpl() reads and caches '0' for SS.AR_BYTES.
- vmx_vcpu_reset() => seg_setup() configures SS.AR_BYTES, but doesn't
invoke vmx_segment_cache_clear() to invalidate the cache.
As a result, KVM retains a stale value in the cache, which can be read,
e.g. via KVM_GET_SREGS. Usually this is not a problem because the VMX
segment cache is reset on each VM-Exit, but if the userspace VMM (e.g KVM
selftests) reads and writes system registers just after the vCPU was
created, _without_ modifying SS.AR_BYTES, userspace will write back the
stale '0' value and ultimately will trigger a VM-Entry failure due to
incorrect SS segment type.
Note, the VM-Enter failure can also be avoided by moving the call to
vmx_segment_cache_clear() until after the vmx_vcpu_reset() initializes all
segments. However, while that change is correct and desirable (and will
come along shortly), it does not address the underlying problem that
accessing KVM's register caches from !task context is generally unsafe.
In addition to fixing the immediate bug, bypassing the cache for this
particular case will allow hardening KVM register caching log to assert
that the caches are accessed only when KVM _knows_ it is safe to do so.
Fixes: de63ad4cf4 ("KVM: X86: implement the logic for spinlock optimization")
Reported-by: Maxim Levitsky <mlevitsk@redhat.com>
Closes: https://lore.kernel.org/all/20240716022014.240960-3-mlevitsk@redhat.com
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20241009175002.1118178-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Provide the "struct page" associated with a guest_memfd pfn as an output
from __kvm_gmem_get_pfn() so that KVM guest page fault handlers can
directly put the page instead of having to rely on
kvm_pfn_to_refcounted_page().
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-47-seanjc@google.com>
Now that all kvm_vcpu_{,un}map() users pass "true" for @dirty, have them
pass "true" as a @writable param to kvm_vcpu_map(), and thus create a
read-only mapping when possible.
Note, creating read-only mappings can be theoretically slower, as they
don't play nice with fast GUP due to the need to break CoW before mapping
the underlying PFN. But practically speaking, creating a mapping isn't
a super hot path, and getting a writable mapping for reading is weird and
confusing.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-34-seanjc@google.com>
Ignore nCR3[4:0] when loading PDPTEs from memory for nested SVM, as bits
4:0 of CR3 are ignored when PAE paging is used, and thus VMRUN doesn't
enforce 32-byte alignment of nCR3.
In the absolute worst case scenario, failure to ignore bits 4:0 can result
in an out-of-bounds read, e.g. if the target page is at the end of a
memslot, and the VMM isn't using guard pages.
Per the APM:
The CR3 register points to the base address of the page-directory-pointer
table. The page-directory-pointer table is aligned on a 32-byte boundary,
with the low 5 address bits 4:0 assumed to be 0.
And the SDM's much more explicit:
4:0 Ignored
Note, KVM gets this right when loading PDPTRs, it's only the nSVM flow
that is broken.
Fixes: e4e517b4be ("KVM: MMU: Do not unconditionally read PDPTE from guest memory")
Reported-by: Kirk Swidowski <swidowski@google.com>
Cc: Andy Nguyen <theflow@google.com>
Cc: 3pvd <3pvd@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20241009140838.1036226-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* KVM currently invalidates the entirety of the page tables, not just
those for the memslot being touched, when a memslot is moved or deleted.
The former does not have particularly noticeable overhead, but Intel's
TDX will require the guest to re-accept private pages if they are
dropped from the secure EPT, which is a non starter. Actually,
the only reason why this is not already being done is a bug which
was never fully investigated and caused VM instability with assigned
GeForce GPUs, so allow userspace to opt into the new behavior.
* Advertise AVX10.1 to userspace (effectively prep work for the "real" AVX10
functionality that is on the horizon).
* Rework common MSR handling code to suppress errors on userspace accesses to
unsupported-but-advertised MSRs. This will allow removing (almost?) all of
KVM's exemptions for userspace access to MSRs that shouldn't exist based on
the vCPU model (the actual cleanup is non-trivial future work).
* Rework KVM's handling of x2APIC ICR, again, because AMD (x2AVIC) splits the
64-bit value into the legacy ICR and ICR2 storage, whereas Intel (APICv)
stores the entire 64-bit value at the ICR offset.
* Fix a bug where KVM would fail to exit to userspace if one was triggered by
a fastpath exit handler.
* Add fastpath handling of HLT VM-Exit to expedite re-entering the guest when
there's already a pending wake event at the time of the exit.
* Fix a WARN caused by RSM entering a nested guest from SMM with invalid guest
state, by forcing the vCPU out of guest mode prior to signalling SHUTDOWN
(the SHUTDOWN hits the VM altogether, not the nested guest)
* Overhaul the "unprotect and retry" logic to more precisely identify cases
where retrying is actually helpful, and to harden all retry paths against
putting the guest into an infinite retry loop.
* Add support for yielding, e.g. to honor NEED_RESCHED, when zapping rmaps in
the shadow MMU.
* Refactor pieces of the shadow MMU related to aging SPTEs in prepartion for
adding multi generation LRU support in KVM.
* Don't stuff the RSB after VM-Exit when RETPOLINE=y and AutoIBRS is enabled,
i.e. when the CPU has already flushed the RSB.
* Trace the per-CPU host save area as a VMCB pointer to improve readability
and cleanup the retrieval of the SEV-ES host save area.
* Remove unnecessary accounting of temporary nested VMCB related allocations.
* Set FINAL/PAGE in the page fault error code for EPT violations if and only
if the GVA is valid. If the GVA is NOT valid, there is no guest-side page
table walk and so stuffing paging related metadata is nonsensical.
* Fix a bug where KVM would incorrectly synthesize a nested VM-Exit instead of
emulating posted interrupt delivery to L2.
* Add a lockdep assertion to detect unsafe accesses of vmcs12 structures.
* Harden eVMCS loading against an impossible NULL pointer deref (really truly
should be impossible).
* Minor SGX fix and a cleanup.
* Misc cleanups
Generic:
* Register KVM's cpuhp and syscore callbacks when enabling virtualization in
hardware, as the sole purpose of said callbacks is to disable and re-enable
virtualization as needed.
* Enable virtualization when KVM is loaded, not right before the first VM
is created. Together with the previous change, this simplifies a
lot the logic of the callbacks, because their very existence implies
virtualization is enabled.
* Fix a bug that results in KVM prematurely exiting to userspace for coalesced
MMIO/PIO in many cases, clean up the related code, and add a testcase.
* Fix a bug in kvm_clear_guest() where it would trigger a buffer overflow _if_
the gpa+len crosses a page boundary, which thankfully is guaranteed to not
happen in the current code base. Add WARNs in more helpers that read/write
guest memory to detect similar bugs.
Selftests:
* Fix a goof that caused some Hyper-V tests to be skipped when run on bare
metal, i.e. NOT in a VM.
* Add a regression test for KVM's handling of SHUTDOWN for an SEV-ES guest.
* Explicitly include one-off assets in .gitignore. Past Sean was completely
wrong about not being able to detect missing .gitignore entries.
* Verify userspace single-stepping works when KVM happens to handle a VM-Exit
in its fastpath.
* Misc cleanups
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmb201AUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOM1gf+Ij7dpCh0KwoNYlHfW2aCHAv3PqQd
cKMDSGxoCernbJEyPO/3qXNUK+p4zKedk3d92snW3mKa+cwxMdfthJ3i9d7uoNiw
7hAgcfKNHDZGqAQXhx8QcVF3wgp+diXSyirR+h1IKrGtCCmjMdNC8ftSYe6voEkw
VTVbLL+tER5H0Xo5UKaXbnXKDbQvWLXkdIqM8dtLGFGLQ2PnF/DdMP0p6HYrKf1w
B7LBu0rvqYDL8/pS82mtR3brHJXxAr9m72fOezRLEUbfUdzkTUi/b1vEe6nDCl0Q
i/PuFlARDLWuetlR0VVWKNbop/C/l4EmwCcKzFHa+gfNH3L9361Oz+NzBw==
=Q7kz
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull x86 kvm updates from Paolo Bonzini:
"x86:
- KVM currently invalidates the entirety of the page tables, not just
those for the memslot being touched, when a memslot is moved or
deleted.
This does not traditionally have particularly noticeable overhead,
but Intel's TDX will require the guest to re-accept private pages
if they are dropped from the secure EPT, which is a non starter.
Actually, the only reason why this is not already being done is a
bug which was never fully investigated and caused VM instability
with assigned GeForce GPUs, so allow userspace to opt into the new
behavior.
- Advertise AVX10.1 to userspace (effectively prep work for the
"real" AVX10 functionality that is on the horizon)
- Rework common MSR handling code to suppress errors on userspace
accesses to unsupported-but-advertised MSRs
This will allow removing (almost?) all of KVM's exemptions for
userspace access to MSRs that shouldn't exist based on the vCPU
model (the actual cleanup is non-trivial future work)
- Rework KVM's handling of x2APIC ICR, again, because AMD (x2AVIC)
splits the 64-bit value into the legacy ICR and ICR2 storage,
whereas Intel (APICv) stores the entire 64-bit value at the ICR
offset
- Fix a bug where KVM would fail to exit to userspace if one was
triggered by a fastpath exit handler
- Add fastpath handling of HLT VM-Exit to expedite re-entering the
guest when there's already a pending wake event at the time of the
exit
- Fix a WARN caused by RSM entering a nested guest from SMM with
invalid guest state, by forcing the vCPU out of guest mode prior to
signalling SHUTDOWN (the SHUTDOWN hits the VM altogether, not the
nested guest)
- Overhaul the "unprotect and retry" logic to more precisely identify
cases where retrying is actually helpful, and to harden all retry
paths against putting the guest into an infinite retry loop
- Add support for yielding, e.g. to honor NEED_RESCHED, when zapping
rmaps in the shadow MMU
- Refactor pieces of the shadow MMU related to aging SPTEs in
prepartion for adding multi generation LRU support in KVM
- Don't stuff the RSB after VM-Exit when RETPOLINE=y and AutoIBRS is
enabled, i.e. when the CPU has already flushed the RSB
- Trace the per-CPU host save area as a VMCB pointer to improve
readability and cleanup the retrieval of the SEV-ES host save area
- Remove unnecessary accounting of temporary nested VMCB related
allocations
- Set FINAL/PAGE in the page fault error code for EPT violations if
and only if the GVA is valid. If the GVA is NOT valid, there is no
guest-side page table walk and so stuffing paging related metadata
is nonsensical
- Fix a bug where KVM would incorrectly synthesize a nested VM-Exit
instead of emulating posted interrupt delivery to L2
- Add a lockdep assertion to detect unsafe accesses of vmcs12
structures
- Harden eVMCS loading against an impossible NULL pointer deref
(really truly should be impossible)
- Minor SGX fix and a cleanup
- Misc cleanups
Generic:
- Register KVM's cpuhp and syscore callbacks when enabling
virtualization in hardware, as the sole purpose of said callbacks
is to disable and re-enable virtualization as needed
- Enable virtualization when KVM is loaded, not right before the
first VM is created
Together with the previous change, this simplifies a lot the logic
of the callbacks, because their very existence implies
virtualization is enabled
- Fix a bug that results in KVM prematurely exiting to userspace for
coalesced MMIO/PIO in many cases, clean up the related code, and
add a testcase
- Fix a bug in kvm_clear_guest() where it would trigger a buffer
overflow _if_ the gpa+len crosses a page boundary, which thankfully
is guaranteed to not happen in the current code base. Add WARNs in
more helpers that read/write guest memory to detect similar bugs
Selftests:
- Fix a goof that caused some Hyper-V tests to be skipped when run on
bare metal, i.e. NOT in a VM
- Add a regression test for KVM's handling of SHUTDOWN for an SEV-ES
guest
- Explicitly include one-off assets in .gitignore. Past Sean was
completely wrong about not being able to detect missing .gitignore
entries
- Verify userspace single-stepping works when KVM happens to handle a
VM-Exit in its fastpath
- Misc cleanups"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (127 commits)
Documentation: KVM: fix warning in "make htmldocs"
s390: Enable KVM_S390_UCONTROL config in debug_defconfig
selftests: kvm: s390: Add VM run test case
KVM: SVM: let alternatives handle the cases when RSB filling is required
KVM: VMX: Set PFERR_GUEST_{FINAL,PAGE}_MASK if and only if the GVA is valid
KVM: x86/mmu: Use KVM_PAGES_PER_HPAGE() instead of an open coded equivalent
KVM: x86/mmu: Add KVM_RMAP_MANY to replace open coded '1' and '1ul' literals
KVM: x86/mmu: Fold mmu_spte_age() into kvm_rmap_age_gfn_range()
KVM: x86/mmu: Morph kvm_handle_gfn_range() into an aging specific helper
KVM: x86/mmu: Honor NEED_RESCHED when zapping rmaps and blocking is allowed
KVM: x86/mmu: Add a helper to walk and zap rmaps for a memslot
KVM: x86/mmu: Plumb a @can_yield parameter into __walk_slot_rmaps()
KVM: x86/mmu: Move walk_slot_rmaps() up near for_each_slot_rmap_range()
KVM: x86/mmu: WARN on MMIO cache hit when emulating write-protected gfn
KVM: x86/mmu: Detect if unprotect will do anything based on invalid_list
KVM: x86/mmu: Subsume kvm_mmu_unprotect_page() into the and_retry() version
KVM: x86: Rename reexecute_instruction()=>kvm_unprotect_and_retry_on_failure()
KVM: x86: Update retry protection fields when forcing retry on emulation failure
KVM: x86: Apply retry protection to "unprotect on failure" path
KVM: x86: Check EMULTYPE_WRITE_PF_TO_SP before unprotecting gfn
...
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZvDNmgAKCRBZ7Krx/gZQ
63zrAP9vI0rf55v27twiabe9LnI7aSx5ckoqXxFIFxyT3dOYpQD/bPmoApnWDD3d
592+iDgLsema/H/0/CqfqlaNtDNY8Q0=
=HUl5
-----END PGP SIGNATURE-----
Merge tag 'pull-stable-struct_fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull 'struct fd' updates from Al Viro:
"Just the 'struct fd' layout change, with conversion to accessor
helpers"
* tag 'pull-stable-struct_fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
add struct fd constructors, get rid of __to_fd()
struct fd: representation change
introduce fd_file(), convert all accessors to it.
KVM SVM changes for 6.12:
- Don't stuff the RSB after VM-Exit when RETPOLINE=y and AutoIBRS is enabled,
i.e. when the CPU has already flushed the RSB.
- Trace the per-CPU host save area as a VMCB pointer to improve readability
and cleanup the retrieval of the SEV-ES host save area.
- Remove unnecessary accounting of temporary nested VMCB related allocations.
KVM x86 misc changes for 6.12
- Advertise AVX10.1 to userspace (effectively prep work for the "real" AVX10
functionality that is on the horizon).
- Rework common MSR handling code to suppress errors on userspace accesses to
unsupported-but-advertised MSRs. This will allow removing (almost?) all of
KVM's exemptions for userspace access to MSRs that shouldn't exist based on
the vCPU model (the actual cleanup is non-trivial future work).
- Rework KVM's handling of x2APIC ICR, again, because AMD (x2AVIC) splits the
64-bit value into the legacy ICR and ICR2 storage, whereas Intel (APICv)
stores the entire 64-bit value a the ICR offset.
- Fix a bug where KVM would fail to exit to userspace if one was triggered by
a fastpath exit handler.
- Add fastpath handling of HLT VM-Exit to expedite re-entering the guest when
there's already a pending wake event at the time of the exit.
- Finally fix the RSM vs. nested VM-Enter WARN by forcing the vCPU out of
guest mode prior to signalling SHUTDOWN (architecturally, the SHUTDOWN is
supposed to hit L1, not L2).
Register KVM's cpuhp and syscore callbacks when enabling virtualization in
hardware, as the sole purpose of said callbacks is to disable and re-enable
virtualization as needed.
The primary motivation for this series is to simplify dealing with enabling
virtualization for Intel's TDX, which needs to enable virtualization
when kvm-intel.ko is loaded, i.e. long before the first VM is created.
That said, this is a nice cleanup on its own. By registering the callbacks
on-demand, the callbacks themselves don't need to check kvm_usage_count,
because their very existence implies a non-zero count.
Patch 1 (re)adds a dedicated lock for kvm_usage_count. This avoids a
lock ordering issue between cpus_read_lock() and kvm_lock. The lock
ordering issue still exist in very rare cases, and will be fixed for
good by switching vm_list to an (S)RCU-protected list.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove superfluous RSB filling after a VMEXIT when the CPU already has
flushed the RSB after a VMEXIT when AutoIBRS is enabled.
The initial implementation for adding RETPOLINES added an ALTERNATIVES
implementation for filling the RSB after a VMEXIT in commit 117cc7a908
("x86/retpoline: Fill return stack buffer on vmexit").
Later, X86_FEATURE_RSB_VMEXIT was added in commit 9756bba284
("x86/speculation: Fill RSB on vmexit for IBRS") to handle stuffing the
RSB if RETPOLINE=y *or* KERNEL_IBRS=y, i.e. to also stuff the RSB if the
kernel is configured to do IBRS mitigations on entry/exit.
The AutoIBRS (on AMD) feature implementation added in commit e7862eda30
("x86/cpu: Support AMD Automatic IBRS") used the already-implemented logic
for EIBRS in spectre_v2_determine_rsb_fill_type_on_vmexit() -- but did not
update the code at VMEXIT to act on the mode selected in that function --
resulting in VMEXITs continuing to clear the RSB when RETPOLINES are
enabled, despite the presence of AutoIBRS.
Signed-off-by: Amit Shah <amit.shah@amd.com>
Link: https://lore.kernel.org/r/20240807123531.69677-1-amit@kernel.org
[sean: massage changeloge, drop comment about AMD not needing RSB_VMEXIT_LITE]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Register the "disable virtualization in an emergency" callback just
before KVM enables virtualization in hardware, as there is no functional
need to keep the callbacks registered while KVM happens to be loaded, but
is inactive, i.e. if KVM hasn't enabled virtualization.
Note, unregistering the callback every time the last VM is destroyed could
have measurable latency due to the synchronize_rcu() needed to ensure all
references to the callback are dropped before KVM is unloaded. But the
latency should be a small fraction of the total latency of disabling
virtualization across all CPUs, and userspace can set enable_virt_at_load
to completely eliminate the runtime overhead.
Add a pointer in kvm_x86_ops to allow vendor code to provide its callback.
There is no reason to force vendor code to do the registration, and either
way KVM would need a new kvm_x86_ops hook.
Suggested-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Chao Gao <chao.gao@intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Acked-by: Kai Huang <kai.huang@intel.com>
Tested-by: Farrah Chen <farrah.chen@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20240830043600.127750-11-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename x86's the per-CPU vendor hooks used to enable virtualization in
hardware to align with the recently renamed arch hooks.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Message-ID: <20240830043600.127750-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a fastpath for HLT VM-Exits by immediately re-entering the guest if
it has a pending wake event. When virtual interrupt delivery is enabled,
i.e. when KVM doesn't need to manually inject interrupts, this allows KVM
to stay in the fastpath run loop when a vIRQ arrives between the guest
doing CLI and STI;HLT. Without AMD's Idle HLT-intercept support, the CPU
generates a HLT VM-Exit even though KVM will immediately resume the guest.
Note, on bare metal, it's relatively uncommon for a modern guest kernel to
actually trigger this scenario, as the window between the guest checking
for a wake event and committing to HLT is quite small. But in a nested
environment, the timings change significantly, e.g. rudimentary testing
showed that ~50% of HLT exits where HLT-polling was successful would be
serviced by this fastpath, i.e. ~50% of the time that a nested vCPU gets
a wake event before KVM schedules out the vCPU, the wake event was pending
even before the VM-Exit.
Link: https://lore.kernel.org/all/20240528041926.3989-3-manali.shukla@amd.com
Link: https://lore.kernel.org/r/20240802195120.325560-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
The host save area is a VMCB, track it as such to help readers follow
along, but mostly to cleanup/simplify the retrieval of the SEV-ES host
save area.
Note, the compile-time assertion that
offsetof(struct vmcb, save) == EXPECTED_VMCB_CONTROL_AREA_SIZE
ensures that the SEV-ES save area is indeed at offset 0x400 (whoever added
the expected/architectural VMCB offsets apparently likes decimal).
No functional change intended.
Link: https://lore.kernel.org/r/20240802204511.352017-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add __sme_pa_to_page() to pair with __sme_page_pa() and use it to replace
open coded equivalents, including for "iopm_base", which previously
avoided having to do __sme_clr() by storing the raw PA in the global
variable.
Opportunistically convert __sme_page_pa() to a helper to provide type
safety.
No functional change intended.
Link: https://lore.kernel.org/r/20240802204511.352017-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Re-introduce the "split" x2APIC ICR storage that KVM used prior to Intel's
IPI virtualization support, but only for AMD. While not stated anywhere
in the APM, despite stating the ICR is a single 64-bit register, AMD CPUs
store the 64-bit ICR as two separate 32-bit values in ICR and ICR2. When
IPI virtualization (IPIv on Intel, all AVIC flavors on AMD) is enabled,
KVM needs to match CPU behavior as some ICR ICR writes will be handled by
the CPU, not by KVM.
Add a kvm_x86_ops knob to control the underlying format used by the CPU to
store the x2APIC ICR, and tune it to AMD vs. Intel regardless of whether
or not x2AVIC is enabled. If KVM is handling all ICR writes, the storage
format for x2APIC mode doesn't matter, and having the behavior follow AMD
versus Intel will provide better test coverage and ease debugging.
Fixes: 4d1d7942e3 ("KVM: SVM: Introduce logic to (de)activate x2AVIC mode")
Cc: stable@vger.kernel.org
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20240719235107.3023592-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
If host supports Bus Lock Detect, KVM advertises it to guests even if
SVM support is absent. Additionally, guest wouldn't be able to use it
despite guest CPUID bit being set. Fix it by unconditionally clearing
the feature bit in KVM cpu capability.
Reported-by: Jim Mattson <jmattson@google.com>
Closes: https://lore.kernel.org/r/CALMp9eRet6+v8Y1Q-i6mqPm4hUow_kJNhmVHfOV8tMfuSS=tVg@mail.gmail.com
Fixes: 76ea438b4a ("KVM: X86: Expose bus lock debug exception to guest")
Cc: stable@vger.kernel.org
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20240808062937.1149-4-ravi.bangoria@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Rename all APIs related to feature MSRs from get_msr_feature() to
get_feature_msr(). The APIs get "feature MSRs", not "MSR features".
And unlike kvm_{g,s}et_msr_common(), the "feature" adjective doesn't
describe the helper itself.
No functional change intended.
Link: https://lore.kernel.org/r/20240802181935.292540-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Refactor get_msr_feature() to take the index and data pointer as distinct
parameters in anticipation of eliminating "struct kvm_msr_entry" usage
further up the primary callchain.
No functional change intended.
Link: https://lore.kernel.org/r/20240802181935.292540-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Rename the "INVALID" internal MSR error return code to "UNSUPPORTED" to
try and make it more clear that access was denied because the MSR itself
is unsupported/unknown. "INVALID" is too ambiguous, as it could just as
easily mean the value for WRMSR as invalid.
Avoid UNKNOWN and UNIMPLEMENTED, as the error code is used for MSRs that
_are_ actually implemented by KVM, e.g. if the MSR is unsupported because
an associated feature flag is not present in guest CPUID.
Opportunistically beef up the comments for the internal MSR error codes.
Link: https://lore.kernel.org/r/20240802181935.292540-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Inject a #GP if the guest attempts to change MSR_AMD64_DE_CFG from its
*current* value, not if the guest attempts to write a value other than
KVM's set of supported bits. As per the comment and the changelog of the
original code, the intent is to effectively make MSR_AMD64_DE_CFG read-
only for the guest.
Opportunistically use a more conventional equality check instead of an
exclusive-OR check to detect attempts to change bits.
Fixes: d1d93fa90f ("KVM: SVM: Add MSR-based feature support for serializing LFENCE")
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20240802181935.292540-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
The fixed size temporary variables vmcb_control_area and vmcb_save_area
allocated in svm_set_nested_state() are released when the function exits.
Meanwhile, svm_set_nested_state() also have vcpu mutex held to avoid
massive concurrency allocation, so we don't need to set GFP_KERNEL_ACCOUNT.
Signed-off-by: Yongqiang Liu <liuyongqiang13@huawei.com>
Link: https://lore.kernel.org/r/20240821112737.3649937-1-liuyongqiang13@huawei.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
If these msrs are read by the emulator (e.g due to 'force emulation' prefix),
SVM code currently fails to extract the corresponding segment bases,
and return them to the emulator.
Fix that.
Cc: stable@vger.kernel.org
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20240802151608.72896-3-mlevitsk@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
The copy_from_user() function returns the number of bytes which it
was not able to copy. Return -EFAULT instead.
Fixes: dee5a47cc7 ("KVM: SEV: Add KVM_SEV_SNP_LAUNCH_UPDATE command")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Message-ID: <20240612115040.2423290-4-dan.carpenter@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If snp_lookup_rmpentry() fails then "assigned" is printed in the error
message but it was never initialized. Initialize it to false.
Fixes: dee5a47cc7 ("KVM: SEV: Add KVM_SEV_SNP_LAUNCH_UPDATE command")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Message-ID: <20240612115040.2423290-3-dan.carpenter@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For any changes of struct fd representation we need to
turn existing accesses to fields into calls of wrappers.
Accesses to struct fd::flags are very few (3 in linux/file.h,
1 in net/socket.c, 3 in fs/overlayfs/file.c and 3 more in
explicit initializers).
Those can be dealt with in the commit converting to
new layout; accesses to struct fd::file are too many for that.
This commit converts (almost) all of f.file to
fd_file(f). It's not entirely mechanical ('file' is used as
a member name more than just in struct fd) and it does not
even attempt to distinguish the uses in pointer context from
those in boolean context; the latter will be eventually turned
into a separate helper (fd_empty()).
NOTE: mass conversion to fd_empty(), tempting as it
might be, is a bad idea; better do that piecewise in commit
that convert from fdget...() to CLASS(...).
[conflicts in fs/fhandle.c, kernel/bpf/syscall.c, mm/memcontrol.c
caught by git; fs/stat.c one got caught by git grep]
[fs/xattr.c conflict]
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This check is currently performed by sev_gmem_post_populate(), but it
applies to all callers of kvm_gmem_populate(): the point of the function
is that the memory is being encrypted and some work has to be done
on all the gfns in order to encrypt them.
Therefore, check the KVM_MEMORY_ATTRIBUTE_PRIVATE attribute prior
to invoking the callback, and stop the operation if a shared page
is encountered. Because CONFIG_KVM_PRIVATE_MEM in principle does
not require attributes, this makes kvm_gmem_populate() depend on
CONFIG_KVM_GENERIC_PRIVATE_MEM (which does require them).
Reviewed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do not allow populating the same page twice with startup data. In the
case of SEV-SNP, for example, the firmware does not allow it anyway,
since the launch-update operation is only possible on pages that are
still shared in the RMP.
Even if it worked, kvm_gmem_populate()'s callback is meant to have side
effects such as updating launch measurements, and updating the same
page twice is unlikely to have the desired results.
Races between calls to the ioctl are not possible because
kvm_gmem_populate() holds slots_lock and the VM should not be running.
But again, even if this worked on other confidential computing technology,
it doesn't matter to guest_memfd.c whether this is something fishy
such as missing synchronization in userspace, or rather something
intentional. One of the racers wins, and the page is initialized by
either kvm_gmem_prepare_folio() or kvm_gmem_populate().
Anyway, out of paranoia, adjust sev_gmem_post_populate() anyway to use
the same errno that kvm_gmem_populate() is using.
Reviewed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM_PRE_FAULT_MEMORY for an SNP guest can race with
sev_gmem_post_populate() in bad ways. The following sequence for
instance can potentially trigger an RMP fault:
thread A, sev_gmem_post_populate: called
thread B, sev_gmem_prepare: places below 'pfn' in a private state in RMP
thread A, sev_gmem_post_populate: *vaddr = kmap_local_pfn(pfn + i);
thread A, sev_gmem_post_populate: copy_from_user(vaddr, src + i * PAGE_SIZE, PAGE_SIZE);
RMP #PF
Fix this by only allowing KVM_PRE_FAULT_MEMORY to run after a guest's
initial private memory contents have been finalized via
KVM_SEV_SNP_LAUNCH_FINISH.
Beyond fixing this issue, it just sort of makes sense to enforce this,
since the KVM_PRE_FAULT_MEMORY documentation states:
"KVM maps memory as if the vCPU generated a stage-2 read page fault"
which sort of implies we should be acting on the same guest state that a
vCPU would see post-launch after the initial guest memory is all set up.
Co-developed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The GHCB 2.0 specification defines 2 GHCB request types to allow SNP guests
to send encrypted messages/requests to firmware: SNP Guest Requests and SNP
Extended Guest Requests. These encrypted messages are used for things like
servicing attestation requests issued by the guest. Implementing support for
these is required to be fully GHCB-compliant.
For the most part, KVM only needs to handle forwarding these requests to
firmware (to be issued via the SNP_GUEST_REQUEST firmware command defined
in the SEV-SNP Firmware ABI), and then forwarding the encrypted response to
the guest.
However, in the case of SNP Extended Guest Requests, the host is also
able to provide the certificate data corresponding to the endorsement key
used by firmware to sign attestation report requests. This certificate data
is provided by userspace because:
1) It allows for different keys/key types to be used for each particular
guest with requiring any sort of KVM API to configure the certificate
table in advance on a per-guest basis.
2) It provides additional flexibility with how attestation requests might
be handled during live migration where the certificate data for
source/dest might be different.
3) It allows all synchronization between certificates and firmware/signing
key updates to be handled purely by userspace rather than requiring
some in-kernel mechanism to facilitate it. [1]
To support fetching certificate data from userspace, a new KVM exit type will
be needed to handle fetching the certificate from userspace. An attempt to
define a new KVM_EXIT_COCO/KVM_EXIT_COCO_REQ_CERTS exit type to handle this
was introduced in v1 of this patchset, but is still being discussed by
community, so for now this patchset only implements a stub version of SNP
Extended Guest Requests that does not provide certificate data, but is still
enough to provide compliance with the GHCB 2.0 spec.
Version 2 of GHCB specification added support for the SNP Extended Guest
Request Message NAE event. This event serves a nearly identical purpose
to the previously-added SNP_GUEST_REQUEST event, but for certain message
types it allows the guest to supply a buffer to be used for additional
information in some cases.
Currently the GHCB spec only defines extended handling of this sort in
the case of attestation requests, where the additional buffer is used to
supply a table of certificate data corresponding to the attestion
report's signing key. Support for this extended handling will require
additional KVM APIs to handle coordinating with userspace.
Whether or not the hypervisor opts to provide this certificate data is
optional. However, support for processing SNP_EXTENDED_GUEST_REQUEST
GHCB requests is required by the GHCB 2.0 specification for SNP guests,
so for now implement a stub implementation that provides an empty
certificate table to the guest if it supplies an additional buffer, but
otherwise behaves identically to SNP_GUEST_REQUEST.
Reviewed-by: Carlos Bilbao <carlos.bilbao.osdev@gmail.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Message-ID: <20240701223148.3798365-4-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Version 2 of GHCB specification added support for the SNP Guest Request
Message NAE event. The event allows for an SEV-SNP guest to make
requests to the SEV-SNP firmware through the hypervisor using the
SNP_GUEST_REQUEST API defined in the SEV-SNP firmware specification.
This is used by guests primarily to request attestation reports from
firmware. There are other request types are available as well, but the
specifics of what guest requests are being made generally does not
affect how they are handled by the hypervisor, which only serves as a
proxy for the guest requests and firmware responses.
Implement handling for these events.
When an SNP Guest Request is issued, the guest will provide its own
request/response pages, which could in theory be passed along directly
to firmware. However, these pages would need special care:
- Both pages are from shared guest memory, so they need to be
protected from migration/etc. occurring while firmware reads/writes
to them. At a minimum, this requires elevating the ref counts and
potentially needing an explicit pinning of the memory. This places
additional restrictions on what type of memory backends userspace
can use for shared guest memory since there would be some reliance
on using refcounted pages.
- The response page needs to be switched to Firmware-owned state
before the firmware can write to it, which can lead to potential
host RMP #PFs if the guest is misbehaved and hands the host a
guest page that KVM is writing to for other reasons (e.g. virtio
buffers).
Both of these issues can be avoided completely by using
separately-allocated bounce pages for both the request/response pages
and passing those to firmware instead. So that's the approach taken
here.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Co-developed-by: Alexey Kardashevskiy <aik@amd.com>
Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Co-developed-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
[mdr: ensure FW command failures are indicated to guest, drop extended
request handling to be re-written as separate patch, massage commit]
Signed-off-by: Michael Roth <michael.roth@amd.com>
Message-ID: <20240701223148.3798365-2-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Make per-CPU save_area allocations NUMA-aware.
- Force sev_es_host_save_area() to be inlined to avoid calling into an
instrumentable function from noinstr code.
-----BEGIN PGP SIGNATURE-----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=RxHs
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-svm-6.11' of https://github.com/kvm-x86/linux into HEAD
KVM SVM changes for 6.11
- Make per-CPU save_area allocations NUMA-aware.
- Force sev_es_host_save_area() to be inlined to avoid calling into an
instrumentable function from noinstr code.
- Don't advertise IA32_PERF_GLOBAL_OVF_CTRL as an MSR-to-be-saved, as it reads
'0' and writes from userspace are ignored.
- Update to the newfangled Intel CPU FMS infrastructure.
- Use macros instead of open-coded literals to clean up KVM's manipulation of
FIXED_CTR_CTRL MSRs.
-----BEGIN PGP SIGNATURE-----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=pJxP
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-pmu-6.11' of https://github.com/kvm-x86/linux into HEAD
KVM x86/pmu changes for 6.11
- Don't advertise IA32_PERF_GLOBAL_OVF_CTRL as an MSR-to-be-saved, as it reads
'0' and writes from userspace are ignored.
- Update to the newfangled Intel CPU FMS infrastructure.
- Use macros instead of open-coded literals to clean up KVM's manipulation of
FIXED_CTR_CTRL MSRs.
- Add a global struct to consolidate tracking of host values, e.g. EFER, and
move "shadow_phys_bits" into the structure as "maxphyaddr".
- Add KVM_CAP_X86_APIC_BUS_CYCLES_NS to allow configuring the effective APIC
bus frequency, because TDX.
- Print the name of the APICv/AVIC inhibits in the relevant tracepoint.
- Clean up KVM's handling of vendor specific emulation to consistently act on
"compatible with Intel/AMD", versus checking for a specific vendor.
- Misc cleanups
-----BEGIN PGP SIGNATURE-----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=Cf2R
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-misc-6.11' of https://github.com/kvm-x86/linux into HEAD
KVM x86 misc changes for 6.11
- Add a global struct to consolidate tracking of host values, e.g. EFER, and
move "shadow_phys_bits" into the structure as "maxphyaddr".
- Add KVM_CAP_X86_APIC_BUS_CYCLES_NS to allow configuring the effective APIC
bus frequency, because TDX.
- Print the name of the APICv/AVIC inhibits in the relevant tracepoint.
- Clean up KVM's handling of vendor specific emulation to consistently act on
"compatible with Intel/AMD", versus checking for a specific vendor.
- Misc cleanups
- Enable halt poll shrinking by default, as Intel found it to be a clear win.
- Setup empty IRQ routing when creating a VM to avoid having to synchronize
SRCU when creating a split IRQCHIP on x86.
- Rework the sched_in/out() paths to replace kvm_arch_sched_in() with a flag
that arch code can use for hooking both sched_in() and sched_out().
- Take the vCPU @id as an "unsigned long" instead of "u32" to avoid
truncating a bogus value from userspace, e.g. to help userspace detect bugs.
- Mark a vCPU as preempted if and only if it's scheduled out while in the
KVM_RUN loop, e.g. to avoid marking it preempted and thus writing guest
memory when retrieving guest state during live migration blackout.
- A few minor cleanups
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEKTobbabEP7vbhhN9OlYIJqCjN/0FAmaRuOYACgkQOlYIJqCj
N/1UnQ/8CI5Qfr+/0gzYgtWmtEMczGG+rMNpzD3XVqPjJjXcMcBiQnplnzUVLhha
vlPdYVK7vgmEt003XGzV55mik46LHL+DX/v4hI3HEdblfyCeNLW3fKEWVRB44qJe
o+YUQwSK42SORUp9oXuQINxhA//U9EnI7CQxlJ8w8wenv5IJKfIGr01DefmfGPAV
PKm9t6WLcNqvhZMEyy/zmzM3KVPCJL0NcwI97x6sHxFpQYIDtL0E/VexA4AFqMoT
QK7cSDC/2US41Zvem/r/GzM/ucdF6vb9suzZYBohwhxtVhwJe2CDeYQZvtNKJ1U7
GOHPaKL6nBWdZCm/yyWbbX2nstY1lHqxhN3JD0X8wqU5rNcwm2b8Vfyav0Ehc7H+
jVbDTshOx4YJmIgajoKjgM050rdBK59TdfVL+l+AAV5q/TlHocalYtvkEBdGmIDg
2td9UHSime6sp20vQfczUEz4bgrQsh4l2Fa/qU2jFwLievnBw0AvEaMximkSGMJe
b8XfjmdTjlOesWAejANKtQolfrq14+1wYw0zZZ8PA+uNVpKdoovmcqSOcaDC9bT8
GO/NFUvoG+lkcvJcIlo1SSl81SmGLosijwxWfGvFAqsgpR3/3l3dYp0QtztoCNJO
d3+HnjgYn5o5FwufuTD3eUOXH4AFjG108DH0o25XrIkb2Kymy0o=
=BalU
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-generic-6.11' of https://github.com/kvm-x86/linux into HEAD
KVM generic changes for 6.11
- Enable halt poll shrinking by default, as Intel found it to be a clear win.
- Setup empty IRQ routing when creating a VM to avoid having to synchronize
SRCU when creating a split IRQCHIP on x86.
- Rework the sched_in/out() paths to replace kvm_arch_sched_in() with a flag
that arch code can use for hooking both sched_in() and sched_out().
- Take the vCPU @id as an "unsigned long" instead of "u32" to avoid
truncating a bogus value from userspace, e.g. to help userspace detect bugs.
- Mark a vCPU as preempted if and only if it's scheduled out while in the
KVM_RUN loop, e.g. to avoid marking it preempted and thus writing guest
memory when retrieving guest state during live migration blackout.
- A few minor cleanups
1. Add ParaVirt steal time support.
2. Add some VM migration enhancement.
3. Add perf kvm-stat support for loongarch.
-----BEGIN PGP SIGNATURE-----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=DpIK
-----END PGP SIGNATURE-----
Merge tag 'loongarch-kvm-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD
LoongArch KVM changes for v6.11
1. Add ParaVirt steal time support.
2. Add some VM migration enhancement.
3. Add perf kvm-stat support for loongarch.
Refine the macros which define maximum General Purpose (GP) and fixed
counter numbers.
Currently the macro KVM_INTEL_PMC_MAX_GENERIC is used to represent the
maximum supported General Purpose (GP) counter number ambiguously across
Intel and AMD platforms. This would cause issues if AMD begins to support
more GP counters than Intel.
Thus a bunch of new macros including vendor specific and vendor
independent are introduced to replace the old macros. The vendor
independent macros are used in x86 common code to hide vendor difference
and eliminate the ambiguity.
No logic changes are introduced in this patch.
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240627021756.144815-1-dapeng1.mi@linux.intel.com
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use sev_es_host_save_area() instead of open coding an equivalent when
setting the MSR_TSC_AUX field during setup.
No functional change intended.
Link: https://lore.kernel.org/r/20240617210432.1642542-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Force sev_es_host_save_area() to be always inlined, as it's used in the
low level VM-Enter/VM-Exit path, which is non-instrumentable.
vmlinux.o: warning: objtool: svm_vcpu_enter_exit+0xb0: call to
sev_es_host_save_area() leaves .noinstr.text section
vmlinux.o: warning: objtool: svm_vcpu_enter_exit+0xbf: call to
sev_es_host_save_area.isra.0() leaves .noinstr.text section
Fixes: c92be2fd8e ("KVM: SVM: Save/restore non-volatile GPRs in SEV-ES VMRUN via host save area")
Reported-by: Borislav Petkov <bp@alien8.de>
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240617210432.1642542-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add module descriptions for the vendor modules to fix allmodconfig
'make W=1' warnings:
WARNING: modpost: missing MODULE_DESCRIPTION() in arch/x86/kvm/kvm-intel.o
WARNING: modpost: missing MODULE_DESCRIPTION() in arch/x86/kvm/kvm-amd.o
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240622-md-kvm-v2-1-29a60f7c48b1@quicinc.com
[sean: split kvm.ko change to separate commit]
Signed-off-by: Sean Christopherson <seanjc@google.com>
With commit 27bd5fdc24 ("KVM: SEV-ES: Prevent MSR access post VMSA
encryption"), older VMMs like QEMU 9.0 and older will fail when booting
SEV-ES guests with something like the following error:
qemu-system-x86_64: error: failed to get MSR 0x174
qemu-system-x86_64: ../qemu.git/target/i386/kvm/kvm.c:3950: kvm_get_msrs: Assertion `ret == cpu->kvm_msr_buf->nmsrs' failed.
This is because older VMMs that might still call
svm_get_msr()/svm_set_msr() for SEV-ES guests after guest boot even if
those interfaces were essentially just noops because of the vCPU state
being encrypted and stored separately in the VMSA. Now those VMMs will
get an -EINVAL and generally crash.
Newer VMMs that are aware of KVM_SEV_INIT2 however are already aware of
the stricter limitations of what vCPU state can be sync'd during
guest run-time, so newer QEMU for instance will work both for legacy
KVM_SEV_ES_INIT interface as well as KVM_SEV_INIT2.
So when using KVM_SEV_INIT2 it's okay to assume userspace can deal with
-EINVAL, whereas for legacy KVM_SEV_ES_INIT the kernel might be dealing
with either an older VMM and so it needs to assume that returning
-EINVAL might break the VMM.
Address this by only returning -EINVAL if the guest was started with
KVM_SEV_INIT2. Otherwise, just silently return.
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Nikunj A Dadhania <nikunj@amd.com>
Reported-by: Srikanth Aithal <sraithal@amd.com>
Closes: https://lore.kernel.org/lkml/37usuu4yu4ok7be2hqexhmcyopluuiqj3k266z4gajc2rcj4yo@eujb23qc3zcm/
Fixes: 27bd5fdc24 ("KVM: SEV-ES: Prevent MSR access post VMSA encryption")
Signed-off-by: Michael Roth <michael.roth@amd.com>
Message-ID: <20240604233510.764949-1-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fold the guts of kvm_arch_sched_in() into kvm_arch_vcpu_load(), keying
off the recently added kvm_vcpu.scheduled_out as appropriate.
Note, there is a very slight functional change, as PLE shrink updates will
now happen after blasting WBINVD, but that is quite uninteresting as the
two operations do not interact in any way.
Acked-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20240522014013.1672962-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Emulate bits 63:32 of the SYSENTER_R{I,S}P MSRs for all vCPUs that are
compatible with Intel's architecture, not just strictly vCPUs that have
vendor==Intel. The behavior of bits 63:32 is architecturally defined in
the SDM, i.e. not some uarch specific quirk of Intel CPUs.
Link: https://lore.kernel.org/r/20240405235603.1173076-8-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Keep kvm_apicv_inhibit enum naming consistent with the current pattern by
renaming the reason/enumerator defined as APICV_INHIBIT_REASON_DISABLE to
APICV_INHIBIT_REASON_DISABLED.
No functional change intended.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Link: https://lore.kernel.org/r/20240506225321.3440701-3-alejandro.j.jimenez@oracle.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
SEV-ES and thus SNP guest mandates LBR Virtualization to be _always_ ON.
Although commit b7e4be0a22 ("KVM: SEV-ES: Delegate LBR virtualization
to the processor") did the correct change for SEV-ES guests, it missed
the SNP. Fix it.
Reported-by: Srikanth Aithal <sraithal@amd.com>
Fixes: b7e4be0a22 ("KVM: SEV-ES: Delegate LBR virtualization to the processor")
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Message-ID: <20240605114810.1304-1-ravi.bangoria@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
save_area of per-CPU svm_data are dominantly accessed from their
own local CPUs, so allocate them node-local for performance reason
so rename __snp_safe_alloc_page as snp_safe_alloc_page_node which
accepts numa node id as input parameter, svm_cpu_init call it with
node id switched from cpu id
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20240520120858.13117-4-lirongqing@baidu.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
The allocation for the per-CPU save area in svm_cpu_init shouldn't
be accounted, So introduce __snp_safe_alloc_page helper, which has
gfp flag as input, svm_cpu_init calls __snp_safe_alloc_page with
GFP_KERNEL, snp_safe_alloc_page calls __snp_safe_alloc_page with
GFP_KERNEL_ACCOUNT as input
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20240520120858.13117-3-lirongqing@baidu.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
The input parameter 'vcpu' in snp_safe_alloc_page is not used.
Therefore, remove it.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20240520120858.13117-2-lirongqing@baidu.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Several '_mask' suffixed variables such as, global_ctrl_mask, are
defined in kvm_pmu structure. However the _mask suffix is ambiguous and
misleading since it's not a real mask with positive logic. On the contrary
it represents the reserved bits of corresponding MSRs and these bits
should not be accessed.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240430005239.13527-2-dapeng1.mi@linux.intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Pull base x86 KVM support for running SEV-SNP guests from Michael Roth:
* add some basic infrastructure and introduces a new KVM_X86_SNP_VM
vm_type to handle differences versus the existing KVM_X86_SEV_VM and
KVM_X86_SEV_ES_VM types.
* implement the KVM API to handle the creation of a cryptographic
launch context, encrypt/measure the initial image into guest memory,
and finalize it before launching it.
* implement handling for various guest-generated events such as page
state changes, onlining of additional vCPUs, etc.
* implement the gmem/mmu hooks needed to prepare gmem-allocated pages
before mapping them into guest private memory ranges as well as
cleaning them up prior to returning them to the host for use as
normal memory. Because those cleanup hooks supplant certain
activities like issuing WBINVDs during KVM MMU invalidations, avoid
duplicating that work to avoid unecessary overhead.
This merge leaves out support support for attestation guest requests
and for loading the signing keys to be used for attestation requests.
As documented in APM[1], LBR Virtualization must be enabled for SEV-ES
guests. Although KVM currently enforces LBRV for SEV-ES guests, there
are multiple issues with it:
o MSR_IA32_DEBUGCTLMSR is still intercepted. Since MSR_IA32_DEBUGCTLMSR
interception is used to dynamically toggle LBRV for performance reasons,
this can be fatal for SEV-ES guests. For ex SEV-ES guest on Zen3:
[guest ~]# wrmsr 0x1d9 0x4
KVM: entry failed, hardware error 0xffffffff
EAX=00000004 EBX=00000000 ECX=000001d9 EDX=00000000
Fix this by never intercepting MSR_IA32_DEBUGCTLMSR for SEV-ES guests.
No additional save/restore logic is required since MSR_IA32_DEBUGCTLMSR
is of swap type A.
o KVM will disable LBRV if userspace sets MSR_IA32_DEBUGCTLMSR before the
VMSA is encrypted. Fix this by moving LBRV enablement code post VMSA
encryption.
[1]: AMD64 Architecture Programmer's Manual Pub. 40332, Rev. 4.07 - June
2023, Vol 2, 15.35.2 Enabling SEV-ES.
https://bugzilla.kernel.org/attachment.cgi?id=304653
Fixes: 376c6d2850 ("KVM: SVM: Provide support for SEV-ES vCPU creation/loading")
Co-developed-by: Nikunj A Dadhania <nikunj@amd.com>
Signed-off-by: Nikunj A Dadhania <nikunj@amd.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Message-ID: <20240531044644.768-4-ravi.bangoria@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As documented in APM[1], LBR Virtualization must be enabled for SEV-ES
guests. So, prevent SEV-ES guests when LBRV support is missing.
[1]: AMD64 Architecture Programmer's Manual Pub. 40332, Rev. 4.07 - June
2023, Vol 2, 15.35.2 Enabling SEV-ES.
https://bugzilla.kernel.org/attachment.cgi?id=304653
Fixes: 376c6d2850 ("KVM: SVM: Provide support for SEV-ES vCPU creation/loading")
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Message-ID: <20240531044644.768-3-ravi.bangoria@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM currently allows userspace to read/write MSRs even after the VMSA is
encrypted. This can cause unintentional issues if MSR access has side-
effects. For ex, while migrating a guest, userspace could attempt to
migrate MSR_IA32_DEBUGCTLMSR and end up unintentionally disabling LBRV on
the target. Fix this by preventing access to those MSRs which are context
switched via the VMSA, once the VMSA is encrypted.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Nikunj A Dadhania <nikunj@amd.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Message-ID: <20240531044644.768-2-ravi.bangoria@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All SNP APs are initially started using the APIC INIT/SIPI sequence in
the guest. This sequence moves the AP MP state from
KVM_MP_STATE_UNINITIALIZED to KVM_MP_STATE_RUNNABLE, so there is no need
to attempt the UNBLOCK.
As it is, the UNBLOCK support in SVM is only enabled when AVIC is
enabled. When AVIC is disabled, AP creation is still successful.
Remove the KVM_REQ_UNBLOCK request from the AP creation code and revert
the changes to the vcpu_unblocking() kvm_x86_ops path.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The hook only handles cleanup work specific to SNP, e.g. RMP table
entries and flushing caches for encrypted guest memory. When run on a
non-SNP-enabled host (currently only possible using
KVM_X86_SW_PROTECTED_VM, e.g. via KVM selftests), the callback is a noop
and will WARN due to the RMP table not being present. It's actually
expected in this case that the RMP table wouldn't be present and that
the hook should be a noop, so drop the WARN_ONCE().
Reported-by: Sean Christopherson <seanjc@google.com>
Closes: https://lore.kernel.org/kvm/ZkU3_y0UoPk5yAeK@google.com/
Fixes: 8eb01900b0 ("KVM: SEV: Implement gmem hook for invalidating private pages")
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently there's a consistent pattern of always calling
host_rmp_make_shared() immediately after snp_page_reclaim(), so go ahead
and handle it automatically as part of snp_page_reclaim(). Also rename
it to kvm_rmp_make_shared() to more easily distinguish it as a
KVM-specific variant of the more generic rmp_make_shared() helper.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use KVM's snapshot of the host's XCR0 when stuffing SEV-ES host state
instead of reading XCR0 from hardware. XCR0 is only written during
boot, i.e. won't change while KVM is running (and KVM at large is hosed
if that doesn't hold true).
Link: https://lore.kernel.org/r/20240423221521.2923759-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add "struct kvm_host_values kvm_host" to hold the various host values
that KVM snapshots during initialization. Bundling the host values into
a single struct simplifies adding new MSRs and other features with host
state/values that KVM cares about, and provides a one-stop shop. E.g.
adding a new value requires one line, whereas tracking each value
individual often requires three: declaration, definition, and export.
No functional change intended.
Link: https://lore.kernel.org/r/20240423221521.2923759-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
When requesting an NMI window, WARN on vNMI support being enabled if and
only if NMIs are actually masked, i.e. if the vCPU is already handling an
NMI. KVM's ABI for NMIs that arrive simultanesouly (from KVM's point of
view) is to inject one NMI and pend the other. When using vNMI, KVM pends
the second NMI simply by setting V_NMI_PENDING, and lets the CPU do the
rest (hardware automatically sets V_NMI_BLOCKING when an NMI is injected).
However, if KVM can't immediately inject an NMI, e.g. because the vCPU is
in an STI shadow or is running with GIF=0, then KVM will request an NMI
window and trigger the WARN (but still function correctly).
Whether or not the GIF=0 case makes sense is debatable, as the intent of
KVM's behavior is to provide functionality that is as close to real
hardware as possible. E.g. if two NMIs are sent in quick succession, the
probability of both NMIs arriving in an STI shadow is infinitesimally low
on real hardware, but significantly larger in a virtual environment, e.g.
if the vCPU is preempted in the STI shadow. For GIF=0, the argument isn't
as clear cut, because the window where two NMIs can collide is much larger
in bare metal (though still small).
That said, KVM should not have divergent behavior for the GIF=0 case based
on whether or not vNMI support is enabled. And KVM has allowed
simultaneous NMIs with GIF=0 for over a decade, since commit 7460fb4a34
("KVM: Fix simultaneous NMIs"). I.e. KVM's GIF=0 handling shouldn't be
modified without a *really* good reason to do so, and if KVM's behavior
were to be modified, it should be done irrespective of vNMI support.
Fixes: fa4c027a79 ("KVM: x86: Add support for SVM's Virtual NMI")
Cc: stable@vger.kernel.org
Cc: Santosh Shukla <Santosh.Shukla@amd.com>
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20240522021435.1684366-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a module parameter than can be used to enable or disable the SEV-SNP
feature. Now that KVM contains the support for the SNP set the GHCB
hypervisor feature flag to indicate that SNP is supported.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Message-ID: <20240501085210.2213060-18-michael.roth@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With SNP/guest_memfd, private/encrypted memory should not be mappable,
and MMU notifications for HVA-mapped memory will only be relevant to
unencrypted guest memory. Therefore, the rationale behind issuing a
wbinvd_on_all_cpus() in sev_guest_memory_reclaimed() should not apply
for SNP guests and can be ignored.
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
[mdr: Add some clarifications in commit]
Signed-off-by: Michael Roth <michael.roth@amd.com>
Message-ID: <20240501085210.2213060-17-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In the case of SEV-SNP, whether or not a 2MB page can be mapped via a
2MB mapping in the guest's nested page table depends on whether or not
any subpages within the range have already been initialized as private
in the RMP table. The existing mixed-attribute tracking in KVM is
insufficient here, for instance:
- gmem allocates 2MB page
- guest issues PVALIDATE on 2MB page
- guest later converts a subpage to shared
- SNP host code issues PSMASH to split 2MB RMP mapping to 4K
- KVM MMU splits NPT mapping to 4K
- guest later converts that shared page back to private
At this point there are no mixed attributes, and KVM would normally
allow for 2MB NPT mappings again, but this is actually not allowed
because the RMP table mappings are 4K and cannot be promoted on the
hypervisor side, so the NPT mappings must still be limited to 4K to
match this.
Implement a kvm_x86_ops.private_max_mapping_level() hook for SEV that
checks for this condition and adjusts the mapping level accordingly.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Message-ID: <20240501085210.2213060-16-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Implement a platform hook to do the work of restoring the direct map
entries of gmem-managed pages and transitioning the corresponding RMP
table entries back to the default shared/hypervisor-owned state.
Signed-off-by: Michael Roth <michael.roth@amd.com>
Message-ID: <20240501085210.2213060-15-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This will handle the RMP table updates needed to put a page into a
private state before mapping it into an SEV-SNP guest.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Message-ID: <20240501085210.2213060-14-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add support for the SEV-SNP AP Creation NAE event. This allows SEV-SNP
guests to alter the register state of the APs on their own. This allows
the guest a way of simulating INIT-SIPI.
A new event, KVM_REQ_UPDATE_PROTECTED_GUEST_STATE, is created and used
so as to avoid updating the VMSA pointer while the vCPU is running.
For CREATE
The guest supplies the GPA of the VMSA to be used for the vCPU with
the specified APIC ID. The GPA is saved in the svm struct of the
target vCPU, the KVM_REQ_UPDATE_PROTECTED_GUEST_STATE event is added
to the vCPU and then the vCPU is kicked.
For CREATE_ON_INIT:
The guest supplies the GPA of the VMSA to be used for the vCPU with
the specified APIC ID the next time an INIT is performed. The GPA is
saved in the svm struct of the target vCPU.
For DESTROY:
The guest indicates it wishes to stop the vCPU. The GPA is cleared
from the svm struct, the KVM_REQ_UPDATE_PROTECTED_GUEST_STATE event is
added to vCPU and then the vCPU is kicked.
The KVM_REQ_UPDATE_PROTECTED_GUEST_STATE event handler will be invoked
as a result of the event or as a result of an INIT. If a new VMSA is to
be installed, the VMSA guest page is set as the VMSA in the vCPU VMCB
and the vCPU state is set to KVM_MP_STATE_RUNNABLE. If a new VMSA is not
to be installed, the VMSA is cleared in the vCPU VMCB and the vCPU state
is set to KVM_MP_STATE_HALTED to prevent it from being run.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Co-developed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Message-ID: <20240501085210.2213060-13-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When SEV-SNP is enabled in the guest, the hardware places restrictions
on all memory accesses based on the contents of the RMP table. When
hardware encounters RMP check failure caused by the guest memory access
it raises the #NPF. The error code contains additional information on
the access type. See the APM volume 2 for additional information.
When using gmem, RMP faults resulting from mismatches between the state
in the RMP table vs. what the guest expects via its page table result
in KVM_EXIT_MEMORY_FAULTs being forwarded to userspace to handle. This
means the only expected case that needs to be handled in the kernel is
when the page size of the entry in the RMP table is larger than the
mapping in the nested page table, in which case a PSMASH instruction
needs to be issued to split the large RMP entry into individual 4K
entries so that subsequent accesses can succeed.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Co-developed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Message-ID: <20240501085210.2213060-12-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SEV-SNP VMs can ask the hypervisor to change the page state in the RMP
table to be private or shared using the Page State Change NAE event
as defined in the GHCB specification version 2.
Forward these requests to userspace as KVM_EXIT_VMGEXITs, similar to how
it is done for requests that don't use a GHCB page.
As with the MSR-based page-state changes, use the existing
KVM_HC_MAP_GPA_RANGE hypercall format to deliver these requests to
userspace via KVM_EXIT_HYPERCALL.
Signed-off-by: Michael Roth <michael.roth@amd.com>
Co-developed-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Message-ID: <20240501085210.2213060-11-michael.roth@amd.com>
Co-developed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SEV-SNP VMs can ask the hypervisor to change the page state in the RMP
table to be private or shared using the Page State Change MSR protocol
as defined in the GHCB specification.
When using gmem, private/shared memory is allocated through separate
pools, and KVM relies on userspace issuing a KVM_SET_MEMORY_ATTRIBUTES
KVM ioctl to tell the KVM MMU whether or not a particular GFN should be
backed by private memory or not.
Forward these page state change requests to userspace so that it can
issue the expected KVM ioctls. The KVM MMU will handle updating the RMP
entries when it is ready to map a private page into a guest.
Use the existing KVM_HC_MAP_GPA_RANGE hypercall format to deliver these
requests to userspace via KVM_EXIT_HYPERCALL.
Signed-off-by: Michael Roth <michael.roth@amd.com>
Co-developed-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Message-ID: <20240501085210.2213060-10-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SEV-SNP guests are required to perform a GHCB GPA registration. Before
using a GHCB GPA for a vCPU the first time, a guest must register the
vCPU GHCB GPA. If hypervisor can work with the guest requested GPA then
it must respond back with the same GPA otherwise return -1.
On VMEXIT, verify that the GHCB GPA matches with the registered value.
If a mismatch is detected, then abort the guest.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Message-ID: <20240501085210.2213060-9-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a KVM_SEV_SNP_LAUNCH_FINISH command to finalize the cryptographic
launch digest which stores the measurement of the guest at launch time.
Also extend the existing SNP firmware data structures to support
disabling the use of Versioned Chip Endorsement Keys (VCEK) by guests as
part of this command.
While finalizing the launch flow, the code also issues the LAUNCH_UPDATE
SNP firmware commands to encrypt/measure the initial VMSA pages for each
configured vCPU, which requires setting the RMP entries for those pages
to private, so also add handling to clean up the RMP entries for these
pages whening freeing vCPUs during shutdown.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Co-developed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Harald Hoyer <harald@profian.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Message-ID: <20240501085210.2213060-8-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A key aspect of a launching an SNP guest is initializing it with a
known/measured payload which is then encrypted into guest memory as
pre-validated private pages and then measured into the cryptographic
launch context created with KVM_SEV_SNP_LAUNCH_START so that the guest
can attest itself after booting.
Since all private pages are provided by guest_memfd, make use of the
kvm_gmem_populate() interface to handle this. The general flow is that
guest_memfd will handle allocating the pages associated with the GPA
ranges being initialized by each particular call of
KVM_SEV_SNP_LAUNCH_UPDATE, copying data from userspace into those pages,
and then the post_populate callback will do the work of setting the
RMP entries for these pages to private and issuing the SNP firmware
calls to encrypt/measure them.
For more information see the SEV-SNP specification.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Co-developed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Message-ID: <20240501085210.2213060-7-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM_SEV_SNP_LAUNCH_START begins the launch process for an SEV-SNP guest.
The command initializes a cryptographic digest context used to construct
the measurement of the guest. Other commands can then at that point be
used to load/encrypt data into the guest's initial launch image.
For more information see the SEV-SNP specification.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Co-developed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Message-ID: <20240501085210.2213060-6-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SEV-SNP builds upon existing SEV and SEV-ES functionality while adding
new hardware-based security protection. SEV-SNP adds strong memory
encryption and integrity protection to help prevent malicious
hypervisor-based attacks such as data replay, memory re-mapping, and
more, to create an isolated execution environment.
Define a new KVM_X86_SNP_VM type which makes use of these capabilities
and extend the KVM_SEV_INIT2 ioctl to support it. Also add a basic
helper to check whether SNP is enabled and set PFERR_PRIVATE_ACCESS for
private #NPFs so they are handled appropriately by KVM MMU.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Co-developed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240501085210.2213060-5-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While the main additions from GHCB protocol version 1 to version 2
revolve mostly around SEV-SNP support, there are a number of changes
applicable to SEV-ES guests as well. Pluck a handful patches from the
SNP hypervisor patchset for GHCB-related changes that are also applicable
to SEV-ES. A KVM_SEV_INIT2 field lets userspace can control the maximum
GHCB protocol version advertised to guests and manage compatibility
across kernels/versions.
The GHCB protocol version may be different from one guest to the next.
Add a field to track it for each KVM instance and extend KVM_SEV_INIT2
to allow it to be configured by userspace.
Now that all SEV-ES support for GHCB protocol version 2 is in place, go
ahead and default to it when creating SEV-ES guests through the new
KVM_SEV_INIT2 interface. Keep the older KVM_SEV_ES_INIT interface
restricted to GHCB protocol version 1.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Message-ID: <20240501071048.2208265-5-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
GHCB version 2 adds support for a GHCB-based termination request that
a guest can issue when it reaches an error state and wishes to inform
the hypervisor that it should be terminated. Implement support for that
similarly to GHCB MSR-based termination requests that are already
available to SEV-ES guests via earlier versions of the GHCB protocol.
See 'Termination Request' in the 'Invoking VMGEXIT' section of the GHCB
specification for more details.
Signed-off-by: Michael Roth <michael.roth@amd.com>
Message-ID: <20240501071048.2208265-4-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Version 2 of the GHCB specification introduced advertisement of features
that are supported by the Hypervisor.
Now that KVM supports version 2 of the GHCB specification, bump the
maximum supported protocol version.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Message-ID: <20240501071048.2208265-3-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add support for AP Reset Hold being invoked using the GHCB MSR protocol,
available in version 2 of the GHCB specification.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Message-ID: <20240501071048.2208265-2-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the sanity check that hardware never sets bits that collide with KVM-
define synthetic bits from kvm_mmu_page_fault() to npf_interception(),
i.e. make the sanity check #NPF specific. The legacy #PF path already
WARNs if _any_ of bits 63:32 are set, and the error code that comes from
VMX's EPT Violatation and Misconfig is 100% synthesized (KVM morphs VMX's
EXIT_QUALIFICATION into error code flags).
Add a compile-time assert in the legacy #PF handler to make sure that KVM-
define flags are covered by its existing sanity check on the upper bits.
Opportunistically add a description of PFERR_IMPLICIT_ACCESS, since we
are removing the comment that defined it.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Message-ID: <20240228024147.41573-8-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The DebugSwap feature of SEV-ES provides a way for confidential guests
to use data breakpoints. Its status is record in VMSA, and therefore
attestation signatures depend on whether it is enabled or not. In order
to avoid invalidating the signatures depending on the host machine, it
was disabled by default (see commit 5abf6dceb0, "SEV: disable SEV-ES
DebugSwap by default", 2024-03-09).
However, we now have a new API to create SEV VMs that allows enabling
DebugSwap based on what the user tells KVM to do, and we also changed the
legacy KVM_SEV_ES_INIT API to never enable DebugSwap. It is therefore
possible to re-enable the feature without breaking compatibility with
kernels that pre-date the introduction of DebugSwap, so go ahead.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240404121327.3107131-14-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The idea that no parameter would ever be necessary when enabling SEV or
SEV-ES for a VM was decidedly optimistic. In fact, in some sense it's
already a parameter whether SEV or SEV-ES is desired. Another possible
source of variability is the desired set of VMSA features, as that affects
the measurement of the VM's initial state and cannot be changed
arbitrarily by the hypervisor.
Create a new sub-operation for KVM_MEMORY_ENCRYPT_OP that can take a struct,
and put the new op to work by including the VMSA features as a field of the
struct. The existing KVM_SEV_INIT and KVM_SEV_ES_INIT use the full set of
supported VMSA features for backwards compatibility.
The struct also includes the usual bells and whistles for future
extensibility: a flags field that must be zero for now, and some padding
at the end.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240404121327.3107131-13-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SEV-ES allows passing custom contents for x87, SSE and AVX state into the VMSA.
Allow userspace to do that with the usual KVM_SET_XSAVE API and only mark
FPU contents as confidential after it has been copied and encrypted into
the VMSA.
Since the XSAVE state for AVX is the first, it does not need the
compacted-state handling of get_xsave_addr(). However, there are other
parts of XSAVE state in the VMSA that currently are not handled, and
the validation logic of get_xsave_addr() is pointless to duplicate
in KVM, so move get_xsave_addr() to public FPU API; it is really just
a facility to operate on XSAVE state and does not expose any internal
details of arch/x86/kernel/fpu.
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240404121327.3107131-12-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240404121327.3107131-11-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240404121327.3107131-10-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Right now, the set of features that are stored in the VMSA upon
initialization is fixed and depends on the module parameters for
kvm-amd.ko. However, the hypervisor cannot really change it at will
because the feature word has to match between the hypervisor and whatever
computes a measurement of the VMSA for attestation purposes.
Add a field to kvm_sev_info that holds the set of features to be stored
in the VMSA; and query it instead of referring to the module parameters.
Because KVM_SEV_INIT and KVM_SEV_ES_INIT accept no parameters, this
does not yet introduce any functional change, but it paves the way for
an API that allows customization of the features per-VM.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20240209183743.22030-6-pbonzini@redhat.com>
Reviewed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240404121327.3107131-7-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Compute the set of features to be stored in the VMSA when KVM is
initialized; move it from there into kvm_sev_info when SEV is initialized,
and then into the initial VMSA.
The new variable can then be used to return the set of supported features
to userspace, via the KVM_GET_DEVICE_ATTR ioctl.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Isaku Yamahata <isaku.yamahata@intel.com>
Message-ID: <20240404121327.3107131-6-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Stop compiling sev.c when CONFIG_KVM_AMD_SEV=n, as the number of #ifdefs
in sev.c is getting ridiculous, and having #ifdefs inside of SEV helpers
is quite confusing.
To minimize #ifdefs in code flows, #ifdef away only the kvm_x86_ops hooks
and the #VMGEXIT handler. Stubs are also restricted to functions that
check sev_enabled and to the destruction functions sev_free_cpu() and
sev_vm_destroy(), where the style of their callers is to leave checks
to the callers. Most call sites instead rely on dead code elimination
to take care of functions that are guarded with sev_guest() or
sev_es_guest().
Signed-off-by: Sean Christopherson <seanjc@google.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240404121327.3107131-3-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Leave SEV and SEV_ES '0' in kvm_cpu_caps by default, and instead set them
in sev_set_cpu_caps() if SEV and SEV-ES support are fully enabled. Aside
from the fact that sev_set_cpu_caps() is wildly misleading when it *clears*
capabilities, this will allow compiling out sev.c without falsely
advertising SEV/SEV-ES support in KVM_GET_SUPPORTED_CPUID.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240404121327.3107131-2-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that KVM uses the host save area to context switch RBP, i.e.
preserves RBP for the entirety of __svm_sev_es_vcpu_run(), create a stack
frame using the standared FRAME_{BEGIN,END} macros.
Note, __svm_sev_es_vcpu_run() is subtly not a leaf function as it can call
into ibpb_feature() via UNTRAIN_RET_VM.
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20240223204233.3337324-8-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use the host save area to preserve volatile registers that are used in
__svm_sev_es_vcpu_run() to access function parameters after #VMEXIT.
Like saving/restoring non-volatile registers, there's no reason not to
take advantage of hardware restoring registers on #VMEXIT, as doing so
shaves a few instructions and the save area is going to be accessed no
matter what.
Converting all register save/restore code to use the host save area also
make it easier to follow the SEV-ES VMRUN flow in its entirety, as
opposed to having a mix of stack-based versus host save area save/restore.
Add a parameter to RESTORE_HOST_SPEC_CTRL_BODY so that the SEV-ES path
doesn't need to write @spec_ctrl_intercepted to memory just to play nice
with the common macro.
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20240223204233.3337324-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use the host save area to save/restore non-volatile (callee-saved)
registers in __svm_sev_es_vcpu_run() to take advantage of hardware loading
all registers from the save area on #VMEXIT. KVM still needs to save the
registers it wants restored, but the loads are handled automatically by
hardware.
Aside from less assembly code, letting hardware do the restoration means
stack frames are preserved for the entirety of __svm_sev_es_vcpu_run().
Opportunistically add a comment to call out why @svm needs to be saved
across VMRUN->#VMEXIT, as it's not easy to decipher that from the macro
hell.
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Michael Roth <michael.roth@amd.com>
Cc: Alexey Kardashevskiy <aik@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20240223204233.3337324-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
POP @spec_ctrl_intercepted into RAX instead of RBX when discarding it from
the stack so that __svm_sev_es_vcpu_run() doesn't modify any non-volatile
registers. __svm_sev_es_vcpu_run() doesn't return a value, and RAX is
already are clobbered multiple times in the #VMEXIT path.
This will allowing using the host save area to save/restore non-volatile
registers in __svm_sev_es_vcpu_run().
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20240223204233.3337324-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Drop 32-bit "support" from __svm_sev_es_vcpu_run(), as SEV/SEV-ES firmly
64-bit only. The "support" was purely the result of bad copy+paste from
__svm_vcpu_run(), which in turn was slightly less bad copy+paste from
__vmx_vcpu_run().
Opportunistically convert to unadulterated register accesses so that it's
easier (but still not easy) to follow which registers hold what arguments,
and when.
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20240223204233.3337324-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Compile (and link) __svm_sev_es_vcpu_run() if and only if SEV support is
actually enabled. This will allow dropping non-existent 32-bit "support"
from __svm_sev_es_vcpu_run() without causing undue confusion.
Intentionally don't provide a stub (but keep the declaration), as any sane
compiler, even with things like KASAN enabled, should eliminate the call
to __svm_sev_es_vcpu_run() since sev_es_guest() unconditionally returns
"false" if CONFIG_KVM_AMD_SEV=n.
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20240223204233.3337324-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Unconditionally create a stack frame in __svm_vcpu_run() to play nice with
unwinding via frame pointers, at least until the point where RBP is loaded
with the guest's value. Don't bother conditioning the code on
CONFIG_FRAME_POINTER=y, as RBP needs to be saved and restored anyways (due
to it being clobbered with the guest's value); omitting the "MOV RSP, RBP"
is not worth the extra #ifdef.
Creating a stack frame will allow removing the OBJECT_FILES_NON_STANDARD
tag from vmenter.S once __svm_sev_es_vcpu_run() is fixed to not stomp all
over RBP for no reason.
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20240223204233.3337324-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Remove KVM's unnecessary zeroing of memory when allocating the pages array
in sev_pin_memory() via __vmalloc(), as the array is only used to hold
kernel pointers. The kmalloc() path for "small" regions doesn't zero the
array, and if KVM leaks state and/or accesses uninitialized data, then the
kernel has bigger problems.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/c7619a3d3cbb36463531a7c73ccbde9db587986c.1710004509.git.christophe.jaillet@wanadoo.fr
[sean: massage changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
We want to fix:
0e11073247 ("x86/retpoline: Do the necessary fixup to the Zen3/4 srso return thunk for !SRSO")
So merge in Linus's latest into x86/urgent to have it available.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The host SNP worthiness can determined later, after alternatives have
been patched, in snp_rmptable_init() depending on cmdline options like
iommu=pt which is incompatible with SNP, for example.
Which means that one cannot use X86_FEATURE_SEV_SNP and will need to
have a special flag for that control.
Use that newly added CC_ATTR_HOST_SEV_SNP in the appropriate places.
Move kdump_sev_callback() to its rightful place, while at it.
Fixes: 216d106c7f ("x86/sev: Add SEV-SNP host initialization support")
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Tested-by: Srikanth Aithal <sraithal@amd.com>
Link: https://lore.kernel.org/r/20240327154317.29909-6-bp@alien8.de
- Add support for systems that are configured with SEV and SEV-ES+ enabled,
but have all ASIDs assigned to SEV-ES+ guests, which effectively makes SEV
unusuable. Cleanup ASID handling to make supporting this scenario less
brittle/ugly.
- Return -EINVAL instead of -EBUSY if userspace attempts to invoke
KVM_SEV{,ES}_INIT on an SEV+ guest. The operation is simply invalid, and
not related to resource contention in any way.
-----BEGIN PGP SIGNATURE-----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=9jK/
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-svm-6.9' of https://github.com/kvm-x86/linux into HEAD
KVM SVM changes for 6.9:
- Add support for systems that are configured with SEV and SEV-ES+ enabled,
but have all ASIDs assigned to SEV-ES+ guests, which effectively makes SEV
unusuable. Cleanup ASID handling to make supporting this scenario less
brittle/ugly.
- Return -EINVAL instead of -EBUSY if userspace attempts to invoke
KVM_SEV{,ES}_INIT on an SEV+ guest. The operation is simply invalid, and
not related to resource contention in any way.
* Changes to FPU handling came in via the main s390 pull request
* Only deliver to the guest the SCLP events that userspace has
requested.
* More virtual vs physical address fixes (only a cleanup since
virtual and physical address spaces are currently the same).
* Fix selftests undefined behavior.
x86:
* Fix a restriction that the guest can't program a PMU event whose
encoding matches an architectural event that isn't included in the
guest CPUID. The enumeration of an architectural event only says
that if a CPU supports an architectural event, then the event can be
programmed *using the architectural encoding*. The enumeration does
NOT say anything about the encoding when the CPU doesn't report support
the event *in general*. It might support it, and it might support it
using the same encoding that made it into the architectural PMU spec.
* Fix a variety of bugs in KVM's emulation of RDPMC (more details on
individual commits) and add a selftest to verify KVM correctly emulates
RDMPC, counter availability, and a variety of other PMC-related
behaviors that depend on guest CPUID and therefore are easier to
validate with selftests than with custom guests (aka kvm-unit-tests).
* Zero out PMU state on AMD if the virtual PMU is disabled, it does not
cause any bug but it wastes time in various cases where KVM would check
if a PMC event needs to be synthesized.
* Optimize triggering of emulated events, with a nice ~10% performance
improvement in VM-Exit microbenchmarks when a vPMU is exposed to the
guest.
* Tighten the check for "PMI in guest" to reduce false positives if an NMI
arrives in the host while KVM is handling an IRQ VM-Exit.
* Fix a bug where KVM would report stale/bogus exit qualification information
when exiting to userspace with an internal error exit code.
* Add a VMX flag in /proc/cpuinfo to report 5-level EPT support.
* Rework TDP MMU root unload, free, and alloc to run with mmu_lock held for
read, e.g. to avoid serializing vCPUs when userspace deletes a memslot.
* Tear down TDP MMU page tables at 4KiB granularity (used to be 1GiB). KVM
doesn't support yielding in the middle of processing a zap, and 1GiB
granularity resulted in multi-millisecond lags that are quite impolite
for CONFIG_PREEMPT kernels.
* Allocate write-tracking metadata on-demand to avoid the memory overhead when
a kernel is built with i915 virtualization support but the workloads use
neither shadow paging nor i915 virtualization.
* Explicitly initialize a variety of on-stack variables in the emulator that
triggered KMSAN false positives.
* Fix the debugregs ABI for 32-bit KVM.
* Rework the "force immediate exit" code so that vendor code ultimately decides
how and when to force the exit, which allowed some optimization for both
Intel and AMD.
* Fix a long-standing bug where kvm_has_noapic_vcpu could be left elevated if
vCPU creation ultimately failed, causing extra unnecessary work.
* Cleanup the logic for checking if the currently loaded vCPU is in-kernel.
* Harden against underflowing the active mmu_notifier invalidation
count, so that "bad" invalidations (usually due to bugs elsehwere in the
kernel) are detected earlier and are less likely to hang the kernel.
x86 Xen emulation:
* Overlay pages can now be cached based on host virtual address,
instead of guest physical addresses. This removes the need to
reconfigure and invalidate the cache if the guest changes the
gpa but the underlying host virtual address remains the same.
* When possible, use a single host TSC value when computing the deadline for
Xen timers in order to improve the accuracy of the timer emulation.
* Inject pending upcall events when the vCPU software-enables its APIC to fix
a bug where an upcall can be lost (and to follow Xen's behavior).
* Fall back to the slow path instead of warning if "fast" IRQ delivery of Xen
events fails, e.g. if the guest has aliased xAPIC IDs.
RISC-V:
* Support exception and interrupt handling in selftests
* New self test for RISC-V architectural timer (Sstc extension)
* New extension support (Ztso, Zacas)
* Support userspace emulation of random number seed CSRs.
ARM:
* Infrastructure for building KVM's trap configuration based on the
architectural features (or lack thereof) advertised in the VM's ID
registers
* Support for mapping vfio-pci BARs as Normal-NC (vaguely similar to
x86's WC) at stage-2, improving the performance of interacting with
assigned devices that can tolerate it
* Conversion of KVM's representation of LPIs to an xarray, utilized to
address serialization some of the serialization on the LPI injection
path
* Support for _architectural_ VHE-only systems, advertised through the
absence of FEAT_E2H0 in the CPU's ID register
* Miscellaneous cleanups, fixes, and spelling corrections to KVM and
selftests
LoongArch:
* Set reserved bits as zero in CPUCFG.
* Start SW timer only when vcpu is blocking.
* Do not restart SW timer when it is expired.
* Remove unnecessary CSR register saving during enter guest.
* Misc cleanups and fixes as usual.
Generic:
* cleanup Kconfig by removing CONFIG_HAVE_KVM, which was basically always
true on all architectures except MIPS (where Kconfig determines the
available depending on CPU capabilities). It is replaced either by
an architecture-dependent symbol for MIPS, and IS_ENABLED(CONFIG_KVM)
everywhere else.
* Factor common "select" statements in common code instead of requiring
each architecture to specify it
* Remove thoroughly obsolete APIs from the uapi headers.
* Move architecture-dependent stuff to uapi/asm/kvm.h
* Always flush the async page fault workqueue when a work item is being
removed, especially during vCPU destruction, to ensure that there are no
workers running in KVM code when all references to KVM-the-module are gone,
i.e. to prevent a very unlikely use-after-free if kvm.ko is unloaded.
* Grab a reference to the VM's mm_struct in the async #PF worker itself instead
of gifting the worker a reference, so that there's no need to remember
to *conditionally* clean up after the worker.
Selftests:
* Reduce boilerplate especially when utilize selftest TAP infrastructure.
* Add basic smoke tests for SEV and SEV-ES, along with a pile of library
support for handling private/encrypted/protected memory.
* Fix benign bugs where tests neglect to close() guest_memfd files.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmX0iP8UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroND7wf+JZoNvwZ+bmwWe/4jn/YwNoYi/C5z
eypn8M1gsWEccpCpqPBwznVm9T29rF4uOlcMvqLEkHfTpaL1EKUUjP1lXPz/ileP
6a2RdOGxAhyTiFC9fjy+wkkjtLbn1kZf6YsS0hjphP9+w0chNbdn0w81dFVnXryd
j7XYI8R/bFAthNsJOuZXSEjCfIHxvTTG74OrTf1B1FEBB+arPmrgUeJftMVhffQK
Sowgg8L/Ii/x6fgV5NZQVSIyVf1rp8z7c6UaHT4Fwb0+RAMW8p9pYv9Qp1YkKp8y
5j0V9UzOHP7FRaYimZ5BtwQoqiZXYylQ+VuU/Y2f4X85cvlLzSqxaEMAPA==
=mqOV
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"S390:
- Changes to FPU handling came in via the main s390 pull request
- Only deliver to the guest the SCLP events that userspace has
requested
- More virtual vs physical address fixes (only a cleanup since
virtual and physical address spaces are currently the same)
- Fix selftests undefined behavior
x86:
- Fix a restriction that the guest can't program a PMU event whose
encoding matches an architectural event that isn't included in the
guest CPUID. The enumeration of an architectural event only says
that if a CPU supports an architectural event, then the event can
be programmed *using the architectural encoding*. The enumeration
does NOT say anything about the encoding when the CPU doesn't
report support the event *in general*. It might support it, and it
might support it using the same encoding that made it into the
architectural PMU spec
- Fix a variety of bugs in KVM's emulation of RDPMC (more details on
individual commits) and add a selftest to verify KVM correctly
emulates RDMPC, counter availability, and a variety of other
PMC-related behaviors that depend on guest CPUID and therefore are
easier to validate with selftests than with custom guests (aka
kvm-unit-tests)
- Zero out PMU state on AMD if the virtual PMU is disabled, it does
not cause any bug but it wastes time in various cases where KVM
would check if a PMC event needs to be synthesized
- Optimize triggering of emulated events, with a nice ~10%
performance improvement in VM-Exit microbenchmarks when a vPMU is
exposed to the guest
- Tighten the check for "PMI in guest" to reduce false positives if
an NMI arrives in the host while KVM is handling an IRQ VM-Exit
- Fix a bug where KVM would report stale/bogus exit qualification
information when exiting to userspace with an internal error exit
code
- Add a VMX flag in /proc/cpuinfo to report 5-level EPT support
- Rework TDP MMU root unload, free, and alloc to run with mmu_lock
held for read, e.g. to avoid serializing vCPUs when userspace
deletes a memslot
- Tear down TDP MMU page tables at 4KiB granularity (used to be
1GiB). KVM doesn't support yielding in the middle of processing a
zap, and 1GiB granularity resulted in multi-millisecond lags that
are quite impolite for CONFIG_PREEMPT kernels
- Allocate write-tracking metadata on-demand to avoid the memory
overhead when a kernel is built with i915 virtualization support
but the workloads use neither shadow paging nor i915 virtualization
- Explicitly initialize a variety of on-stack variables in the
emulator that triggered KMSAN false positives
- Fix the debugregs ABI for 32-bit KVM
- Rework the "force immediate exit" code so that vendor code
ultimately decides how and when to force the exit, which allowed
some optimization for both Intel and AMD
- Fix a long-standing bug where kvm_has_noapic_vcpu could be left
elevated if vCPU creation ultimately failed, causing extra
unnecessary work
- Cleanup the logic for checking if the currently loaded vCPU is
in-kernel
- Harden against underflowing the active mmu_notifier invalidation
count, so that "bad" invalidations (usually due to bugs elsehwere
in the kernel) are detected earlier and are less likely to hang the
kernel
x86 Xen emulation:
- Overlay pages can now be cached based on host virtual address,
instead of guest physical addresses. This removes the need to
reconfigure and invalidate the cache if the guest changes the gpa
but the underlying host virtual address remains the same
- When possible, use a single host TSC value when computing the
deadline for Xen timers in order to improve the accuracy of the
timer emulation
- Inject pending upcall events when the vCPU software-enables its
APIC to fix a bug where an upcall can be lost (and to follow Xen's
behavior)
- Fall back to the slow path instead of warning if "fast" IRQ
delivery of Xen events fails, e.g. if the guest has aliased xAPIC
IDs
RISC-V:
- Support exception and interrupt handling in selftests
- New self test for RISC-V architectural timer (Sstc extension)
- New extension support (Ztso, Zacas)
- Support userspace emulation of random number seed CSRs
ARM:
- Infrastructure for building KVM's trap configuration based on the
architectural features (or lack thereof) advertised in the VM's ID
registers
- Support for mapping vfio-pci BARs as Normal-NC (vaguely similar to
x86's WC) at stage-2, improving the performance of interacting with
assigned devices that can tolerate it
- Conversion of KVM's representation of LPIs to an xarray, utilized
to address serialization some of the serialization on the LPI
injection path
- Support for _architectural_ VHE-only systems, advertised through
the absence of FEAT_E2H0 in the CPU's ID register
- Miscellaneous cleanups, fixes, and spelling corrections to KVM and
selftests
LoongArch:
- Set reserved bits as zero in CPUCFG
- Start SW timer only when vcpu is blocking
- Do not restart SW timer when it is expired
- Remove unnecessary CSR register saving during enter guest
- Misc cleanups and fixes as usual
Generic:
- Clean up Kconfig by removing CONFIG_HAVE_KVM, which was basically
always true on all architectures except MIPS (where Kconfig
determines the available depending on CPU capabilities). It is
replaced either by an architecture-dependent symbol for MIPS, and
IS_ENABLED(CONFIG_KVM) everywhere else
- Factor common "select" statements in common code instead of
requiring each architecture to specify it
- Remove thoroughly obsolete APIs from the uapi headers
- Move architecture-dependent stuff to uapi/asm/kvm.h
- Always flush the async page fault workqueue when a work item is
being removed, especially during vCPU destruction, to ensure that
there are no workers running in KVM code when all references to
KVM-the-module are gone, i.e. to prevent a very unlikely
use-after-free if kvm.ko is unloaded
- Grab a reference to the VM's mm_struct in the async #PF worker
itself instead of gifting the worker a reference, so that there's
no need to remember to *conditionally* clean up after the worker
Selftests:
- Reduce boilerplate especially when utilize selftest TAP
infrastructure
- Add basic smoke tests for SEV and SEV-ES, along with a pile of
library support for handling private/encrypted/protected memory
- Fix benign bugs where tests neglect to close() guest_memfd files"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (246 commits)
selftests: kvm: remove meaningless assignments in Makefiles
KVM: riscv: selftests: Add Zacas extension to get-reg-list test
RISC-V: KVM: Allow Zacas extension for Guest/VM
KVM: riscv: selftests: Add Ztso extension to get-reg-list test
RISC-V: KVM: Allow Ztso extension for Guest/VM
RISC-V: KVM: Forward SEED CSR access to user space
KVM: riscv: selftests: Add sstc timer test
KVM: riscv: selftests: Change vcpu_has_ext to a common function
KVM: riscv: selftests: Add guest helper to get vcpu id
KVM: riscv: selftests: Add exception handling support
LoongArch: KVM: Remove unnecessary CSR register saving during enter guest
LoongArch: KVM: Do not restart SW timer when it is expired
LoongArch: KVM: Start SW timer only when vcpu is blocking
LoongArch: KVM: Set reserved bits as zero in CPUCFG
KVM: selftests: Explicitly close guest_memfd files in some gmem tests
KVM: x86/xen: fix recursive deadlock in timer injection
KVM: pfncache: simplify locking and make more self-contained
KVM: x86/xen: remove WARN_ON_ONCE() with false positives in evtchn delivery
KVM: x86/xen: inject vCPU upcall vector when local APIC is enabled
KVM: x86/xen: improve accuracy of Xen timers
...
- The biggest change is the rework of the percpu code,
to support the 'Named Address Spaces' GCC feature,
by Uros Bizjak:
- This allows C code to access GS and FS segment relative
memory via variables declared with such attributes,
which allows the compiler to better optimize those accesses
than the previous inline assembly code.
- The series also includes a number of micro-optimizations
for various percpu access methods, plus a number of
cleanups of %gs accesses in assembly code.
- These changes have been exposed to linux-next testing for
the last ~5 months, with no known regressions in this area.
- Fix/clean up __switch_to()'s broken but accidentally
working handling of FPU switching - which also generates
better code.
- Propagate more RIP-relative addressing in assembly code,
to generate slightly better code.
- Rework the CPU mitigations Kconfig space to be less idiosyncratic,
to make it easier for distros to follow & maintain these options.
- Rework the x86 idle code to cure RCU violations and
to clean up the logic.
- Clean up the vDSO Makefile logic.
- Misc cleanups and fixes.
[ Please note that there's a higher number of merge commits in
this branch (three) than is usual in x86 topic trees. This happened
due to the long testing lifecycle of the percpu changes that
involved 3 merge windows, which generated a longer history
and various interactions with other core x86 changes that we
felt better about to carry in a single branch. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=3v4F
-----END PGP SIGNATURE-----
Merge tag 'x86-core-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core x86 updates from Ingo Molnar:
- The biggest change is the rework of the percpu code, to support the
'Named Address Spaces' GCC feature, by Uros Bizjak:
- This allows C code to access GS and FS segment relative memory
via variables declared with such attributes, which allows the
compiler to better optimize those accesses than the previous
inline assembly code.
- The series also includes a number of micro-optimizations for
various percpu access methods, plus a number of cleanups of %gs
accesses in assembly code.
- These changes have been exposed to linux-next testing for the
last ~5 months, with no known regressions in this area.
- Fix/clean up __switch_to()'s broken but accidentally working handling
of FPU switching - which also generates better code
- Propagate more RIP-relative addressing in assembly code, to generate
slightly better code
- Rework the CPU mitigations Kconfig space to be less idiosyncratic, to
make it easier for distros to follow & maintain these options
- Rework the x86 idle code to cure RCU violations and to clean up the
logic
- Clean up the vDSO Makefile logic
- Misc cleanups and fixes
* tag 'x86-core-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
x86/idle: Select idle routine only once
x86/idle: Let prefer_mwait_c1_over_halt() return bool
x86/idle: Cleanup idle_setup()
x86/idle: Clean up idle selection
x86/idle: Sanitize X86_BUG_AMD_E400 handling
sched/idle: Conditionally handle tick broadcast in default_idle_call()
x86: Increase brk randomness entropy for 64-bit systems
x86/vdso: Move vDSO to mmap region
x86/vdso/kbuild: Group non-standard build attributes and primary object file rules together
x86/vdso: Fix rethunk patching for vdso-image-{32,64}.o
x86/retpoline: Ensure default return thunk isn't used at runtime
x86/vdso: Use CONFIG_COMPAT_32 to specify vdso32
x86/vdso: Use $(addprefix ) instead of $(foreach )
x86/vdso: Simplify obj-y addition
x86/vdso: Consolidate targets and clean-files
x86/bugs: Rename CONFIG_RETHUNK => CONFIG_MITIGATION_RETHUNK
x86/bugs: Rename CONFIG_CPU_SRSO => CONFIG_MITIGATION_SRSO
x86/bugs: Rename CONFIG_CPU_IBRS_ENTRY => CONFIG_MITIGATION_IBRS_ENTRY
x86/bugs: Rename CONFIG_CPU_UNRET_ENTRY => CONFIG_MITIGATION_UNRET_ENTRY
x86/bugs: Rename CONFIG_SLS => CONFIG_MITIGATION_SLS
...
kernel to be used as a KVM hypervisor capable of running SNP (Secure
Nested Paging) guests. Roughly speaking, SEV-SNP is the ultimate goal
of the AMD confidential computing side, providing the most
comprehensive confidential computing environment up to date.
This is the x86 part and there is a KVM part which did not get ready
in time for the merge window so latter will be forthcoming in the next
cycle.
- Rework the early code's position-dependent SEV variable references in
order to allow building the kernel with clang and -fPIE/-fPIC and
-mcmodel=kernel
- The usual set of fixes, cleanups and improvements all over the place
-----BEGIN PGP SIGNATURE-----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=c1ps
-----END PGP SIGNATURE-----
Merge tag 'x86_sev_for_v6.9_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SEV updates from Borislav Petkov:
- Add the x86 part of the SEV-SNP host support.
This will allow the kernel to be used as a KVM hypervisor capable of
running SNP (Secure Nested Paging) guests. Roughly speaking, SEV-SNP
is the ultimate goal of the AMD confidential computing side,
providing the most comprehensive confidential computing environment
up to date.
This is the x86 part and there is a KVM part which did not get ready
in time for the merge window so latter will be forthcoming in the
next cycle.
- Rework the early code's position-dependent SEV variable references in
order to allow building the kernel with clang and -fPIE/-fPIC and
-mcmodel=kernel
- The usual set of fixes, cleanups and improvements all over the place
* tag 'x86_sev_for_v6.9_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
x86/sev: Disable KMSAN for memory encryption TUs
x86/sev: Dump SEV_STATUS
crypto: ccp - Have it depend on AMD_IOMMU
iommu/amd: Fix failure return from snp_lookup_rmpentry()
x86/sev: Fix position dependent variable references in startup code
crypto: ccp: Make snp_range_list static
x86/Kconfig: Remove CONFIG_AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT
Documentation: virt: Fix up pre-formatted text block for SEV ioctls
crypto: ccp: Add the SNP_SET_CONFIG command
crypto: ccp: Add the SNP_COMMIT command
crypto: ccp: Add the SNP_PLATFORM_STATUS command
x86/cpufeatures: Enable/unmask SEV-SNP CPU feature
KVM: SEV: Make AVIC backing, VMSA and VMCB memory allocation SNP safe
crypto: ccp: Add panic notifier for SEV/SNP firmware shutdown on kdump
iommu/amd: Clean up RMP entries for IOMMU pages during SNP shutdown
crypto: ccp: Handle legacy SEV commands when SNP is enabled
crypto: ccp: Handle non-volatile INIT_EX data when SNP is enabled
crypto: ccp: Handle the legacy TMR allocation when SNP is enabled
x86/sev: Introduce an SNP leaked pages list
crypto: ccp: Provide an API to issue SEV and SNP commands
...
- Fix several bugs where KVM speciously prevents the guest from utilizing
fixed counters and architectural event encodings based on whether or not
guest CPUID reports support for the _architectural_ encoding.
- Fix a variety of bugs in KVM's emulation of RDPMC, e.g. for "fast" reads,
priority of VMX interception vs #GP, PMC types in architectural PMUs, etc.
- Add a selftest to verify KVM correctly emulates RDMPC, counter availability,
and a variety of other PMC-related behaviors that depend on guest CPUID,
i.e. are difficult to validate via KVM-Unit-Tests.
- Zero out PMU metadata on AMD if the virtual PMU is disabled to avoid wasting
cycles, e.g. when checking if a PMC event needs to be synthesized when
skipping an instruction.
- Optimize triggering of emulated events, e.g. for "count instructions" events
when skipping an instruction, which yields a ~10% performance improvement in
VM-Exit microbenchmarks when a vPMU is exposed to the guest.
- Tighten the check for "PMI in guest" to reduce false positives if an NMI
arrives in the host while KVM is handling an IRQ VM-Exit.
-----BEGIN PGP SIGNATURE-----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=vayI
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-pmu-6.9' of https://github.com/kvm-x86/linux into HEAD
KVM x86 PMU changes for 6.9:
- Fix several bugs where KVM speciously prevents the guest from utilizing
fixed counters and architectural event encodings based on whether or not
guest CPUID reports support for the _architectural_ encoding.
- Fix a variety of bugs in KVM's emulation of RDPMC, e.g. for "fast" reads,
priority of VMX interception vs #GP, PMC types in architectural PMUs, etc.
- Add a selftest to verify KVM correctly emulates RDMPC, counter availability,
and a variety of other PMC-related behaviors that depend on guest CPUID,
i.e. are difficult to validate via KVM-Unit-Tests.
- Zero out PMU metadata on AMD if the virtual PMU is disabled to avoid wasting
cycles, e.g. when checking if a PMC event needs to be synthesized when
skipping an instruction.
- Optimize triggering of emulated events, e.g. for "count instructions" events
when skipping an instruction, which yields a ~10% performance improvement in
VM-Exit microbenchmarks when a vPMU is exposed to the guest.
- Tighten the check for "PMI in guest" to reduce false positives if an NMI
arrives in the host while KVM is handling an IRQ VM-Exit.
- Explicitly initialize a variety of on-stack variables in the emulator that
triggered KMSAN false positives (though in fairness in KMSAN, it's comically
difficult to see that the uninitialized memory is never truly consumed).
- Fix the deubgregs ABI for 32-bit KVM, and clean up code related to reading
DR6 and DR7.
- Rework the "force immediate exit" code so that vendor code ultimately
decides how and when to force the exit. This allows VMX to further optimize
handling preemption timer exits, and allows SVM to avoid sending a duplicate
IPI (SVM also has a need to force an exit).
- Fix a long-standing bug where kvm_has_noapic_vcpu could be left elevated if
vCPU creation ultimately failed, and add WARN to guard against similar bugs.
- Provide a dedicated arch hook for checking if a different vCPU was in-kernel
(for directed yield), and simplify the logic for checking if the currently
loaded vCPU is in-kernel.
- Misc cleanups and fixes.
-----BEGIN PGP SIGNATURE-----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=GX0O
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-misc-6.9' of https://github.com/kvm-x86/linux into HEAD
KVM x86 misc changes for 6.9:
- Explicitly initialize a variety of on-stack variables in the emulator that
triggered KMSAN false positives (though in fairness in KMSAN, it's comically
difficult to see that the uninitialized memory is never truly consumed).
- Fix the deubgregs ABI for 32-bit KVM, and clean up code related to reading
DR6 and DR7.
- Rework the "force immediate exit" code so that vendor code ultimately
decides how and when to force the exit. This allows VMX to further optimize
handling preemption timer exits, and allows SVM to avoid sending a duplicate
IPI (SVM also has a need to force an exit).
- Fix a long-standing bug where kvm_has_noapic_vcpu could be left elevated if
vCPU creation ultimately failed, and add WARN to guard against similar bugs.
- Provide a dedicated arch hook for checking if a different vCPU was in-kernel
(for directed yield), and simplify the logic for checking if the currently
loaded vCPU is in-kernel.
- Misc cleanups and fixes.
The DebugSwap feature of SEV-ES provides a way for confidential guests to use
data breakpoints. However, because the status of the DebugSwap feature is
recorded in the VMSA, enabling it by default invalidates the attestation
signatures. In 6.10 we will introduce a new API to create SEV VMs that
will allow enabling DebugSwap based on what the user tells KVM to do.
Contextually, we will change the legacy KVM_SEV_ES_INIT API to never
enable DebugSwap.
For compatibility with kernels that pre-date the introduction of DebugSwap,
as well as with those where KVM_SEV_ES_INIT will never enable it, do not enable
the feature by default. If anybody wants to use it, for now they can enable
the sev_es_debug_swap_enabled module parameter, but this will result in a
warning.
Fixes: d1f85fbe83 ("KVM: SEV: Enable data breakpoints in SEV-ES")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do the cache flush of converted pages in svm_register_enc_region() before
dropping kvm->lock to fix use-after-free issues where region and/or its
array of pages could be freed by a different task, e.g. if userspace has
__unregister_enc_region_locked() already queued up for the region.
Note, the "obvious" alternative of using local variables doesn't fully
resolve the bug, as region->pages is also dynamically allocated. I.e. the
region structure itself would be fine, but region->pages could be freed.
Flushing multiple pages under kvm->lock is unfortunate, but the entire
flow is a rare slow path, and the manual flush is only needed on CPUs that
lack coherency for encrypted memory.
Fixes: 19a23da539 ("Fix unsynchronized access to sev members through svm_register_enc_region")
Reported-by: Gabe Kirkpatrick <gkirkpatrick@google.com>
Cc: Josh Eads <josheads@google.com>
Cc: Peter Gonda <pgonda@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20240217013430.2079561-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that vmx->req_immediate_exit is used only in the scope of
vmx_vcpu_run(), use force_immediate_exit to detect that KVM should usurp
the VMX preemption to force a VM-Exit and let vendor code fully handle
forcing a VM-Exit.
Opportunsitically drop __kvm_request_immediate_exit() and just have
vendor code call smp_send_reschedule() directly. SVM already does this
when injecting an event while also trying to single-step an IRET, i.e.
it's not exactly secret knowledge that KVM uses a reschedule IPI to force
an exit.
Link: https://lore.kernel.org/r/20240110012705.506918-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Let the fastpath code decide which exits can/can't be handled in the
fastpath when L2 is active, e.g. when KVM generates a VMX preemption
timer exit to forcefully regain control, there is no "work" to be done and
so such exits can be handled in the fastpath regardless of whether L1 or
L2 is active.
Moving the is_guest_mode() check into the fastpath code also makes it
easier to see that L2 isn't allowed to use the fastpath in most cases,
e.g. it's not immediately obvious why handle_fastpath_preemption_timer()
is called from the fastpath and the normal path.
Link: https://lore.kernel.org/r/20240110012705.506918-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Annotate the kvm_entry() tracepoint with "immediate exit" when KVM is
forcing a VM-Exit immediately after VM-Enter, e.g. when KVM wants to
inject an event but needs to first complete some other operation.
Knowing that KVM is (or isn't) forcing an exit is useful information when
debugging issues related to event injection.
Suggested-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20240110012705.506918-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Convert kvm_get_dr()'s output parameter to a return value, and clean up
most of the mess that was created by forcing callers to provide a pointer.
No functional change intended.
Acked-by: Mathias Krause <minipli@grsecurity.net>
Reviewed-by: Mathias Krause <minipli@grsecurity.net>
Link: https://lore.kernel.org/r/20240209220752.388160-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
We've had issues with gcc and 'asm goto' before, and we created a
'asm_volatile_goto()' macro for that in the past: see commits
3f0116c323 ("compiler/gcc4: Add quirk for 'asm goto' miscompilation
bug") and a9f180345f ("compiler/gcc4: Make quirk for
asm_volatile_goto() unconditional").
Then, much later, we ended up removing the workaround in commit
43c249ea0b ("compiler-gcc.h: remove ancient workaround for gcc PR
58670") because we no longer supported building the kernel with the
affected gcc versions, but we left the macro uses around.
Now, Sean Christopherson reports a new version of a very similar
problem, which is fixed by re-applying that ancient workaround. But the
problem in question is limited to only the 'asm goto with outputs'
cases, so instead of re-introducing the old workaround as-is, let's
rename and limit the workaround to just that much less common case.
It looks like there are at least two separate issues that all hit in
this area:
(a) some versions of gcc don't mark the asm goto as 'volatile' when it
has outputs:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=98619https://gcc.gnu.org/bugzilla/show_bug.cgi?id=110420
which is easy to work around by just adding the 'volatile' by hand.
(b) Internal compiler errors:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=110422
which are worked around by adding the extra empty 'asm' as a
barrier, as in the original workaround.
but the problem Sean sees may be a third thing since it involves bad
code generation (not an ICE) even with the manually added 'volatile'.
but the same old workaround works for this case, even if this feels a
bit like voodoo programming and may only be hiding the issue.
Reported-and-tested-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/all/20240208220604.140859-1-seanjc@google.com/
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Cc: Jakub Jelinek <jakub@redhat.com>
Cc: Andrew Pinski <quic_apinski@quicinc.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Return -EINVAL instead of -EBUSY if userspace attempts KVM_SEV{,ES}_INIT
on a VM that already has SEV active. Returning -EBUSY is nonsencial as
it's impossible to deactivate SEV without destroying the VM, i.e. the VM
isn't "busy" in any sane sense of the word, and the odds of any userspace
wanting exactly -EBUSY on a userspace bug are minuscule.
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20240131235609.4161407-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Some BIOSes allow the end user to set the minimum SEV ASID value
(CPUID 0x8000001F_EDX) to be greater than the maximum number of
encrypted guests, or maximum SEV ASID value (CPUID 0x8000001F_ECX)
in order to dedicate all the SEV ASIDs to SEV-ES or SEV-SNP.
The SEV support, as coded, does not handle the case where the minimum
SEV ASID value can be greater than the maximum SEV ASID value.
As a result, the following confusing message is issued:
[ 30.715724] kvm_amd: SEV enabled (ASIDs 1007 - 1006)
Fix the support to properly handle this case.
Fixes: 916391a2d1 ("KVM: SVM: Add support for SEV-ES capability in KVM")
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20240104190520.62510-1-Ashish.Kalra@amd.com
Link: https://lore.kernel.org/r/20240131235609.4161407-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Convert all local ASID variables and parameters throughout the SEV code
from signed integers to unsigned integers. As ASIDs are fundamentally
unsigned values, and the global min/max variables are appropriately
unsigned integers, too.
Functionally, this is a glorified nop as KVM guarantees min_sev_asid is
non-zero, and no CPU supports -1u as the _only_ asid, i.e. the signed vs.
unsigned goof won't cause problems in practice.
Opportunistically use sev_get_asid() in sev_flush_encrypted_page() instead
of open coding an equivalent.
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20240131235609.4161407-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Explicitly set sev->asid in sev_asid_new() when a new ASID is successfully
allocated, and return '0' to indicate success instead of overloading the
return value to multiplex the ASID with error codes. There is exactly one
caller of sev_asid_new(), and sev_asid_free() already consumes sev->asid,
i.e. returning the ASID isn't necessary for flexibility, nor does it
provide symmetry between related APIs.
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20240131235609.4161407-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a common helper for *internal* PMC lookups, and delete the ops hook
and Intel's implementation. Keep AMD's implementation, but rename it to
amd_pmu_get_pmc() to make it somewhat more obvious that it's suited for
both KVM-internal and guest-initiated lookups.
Because KVM tracks all counters in a single bitmap, getting a counter
when iterating over a bitmap, e.g. of all valid PMCs, requires a small
amount of math, that while simple, isn't super obvious and doesn't use the
same semantics as PMC lookups from RDPMC! Although AMD doesn't support
fixed counters, the common PMU code still behaves as if there a split, the
high half of which just happens to always be empty.
Opportunstically add a comment to explain both what is going on, and why
KVM uses a single bitmap, e.g. the boilerplate for iterating over separate
bitmaps could be done via macros, so it's not (just) about deduplicating
code.
Link: https://lore.kernel.org/r/20231110022857.1273836-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Apply the pre-intercepts RDPMC validity check only to AMD, and rename all
relevant functions to make it as clear as possible that the check is not a
standard PMC index check. On Intel, the basic rule is that only invalid
opcodes and privilege/permission/mode checks have priority over VM-Exit,
i.e. RDPMC with an invalid index should VM-Exit, not #GP. While the SDM
doesn't explicitly call out RDPMC, it _does_ explicitly use RDMSR of a
non-existent MSR as an example where VM-Exit has priority over #GP, and
RDPMC is effectively just a variation of RDMSR.
Manually testing on various Intel CPUs confirms this behavior, and the
inverted priority was introduced for SVM compatibility, i.e. was not an
intentional change for Intel PMUs. On AMD, *all* exceptions on RDPMC have
priority over VM-Exit.
Check for a NULL kvm_pmu_ops.check_rdpmc_early instead of using a RET0
static call so as to provide a convenient location to document the
difference between Intel and AMD, and to again try to make it as obvious
as possible that the early check is a one-off thing, not a generic "is
this PMC valid?" helper.
Fixes: 8061252ee0 ("KVM: SVM: Add intercept checks for remaining twobyte instructions")
Cc: Jim Mattson <jmattson@google.com>
Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240109230250.424295-8-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Stop stripping bits 31:30 prior to validating/consuming the RDPMC index on
AMD. Per the APM's documentation of RDPMC, *values* greater than 27 are
reserved. The behavior of upper bits being flags is firmly Intel-only.
Fixes: ca724305a2 ("KVM: x86/vPMU: Implement AMD vPMU code for KVM")
Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240109230250.424295-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Remove KVM's bogus restriction that the guest can't program an event whose
encoding matches an unsupported architectural event. The enumeration of
an architectural event only says that if a CPU supports an architectural
event, then the event can be programmed using the architectural encoding.
The enumeration does NOT say anything about the encoding when the CPU
doesn't report support the architectural event.
Preventing the guest from counting events whose encoding happens to match
an architectural event breaks existing functionality whenever Intel adds
an architectural encoding that was *ever* used for a CPU that doesn't
enumerate support for the architectural event, even if the encoding is for
the exact same event!
E.g. the architectural encoding for Top-Down Slots is 0x01a4. Broadwell
CPUs, which do not support the Top-Down Slots architectural event, 0x01a4
is a valid, model-specific event. Denying guest usage of 0x01a4 if/when
KVM adds support for Top-Down slots would break any Broadwell-based guest.
Reported-by: Kan Liang <kan.liang@linux.intel.com>
Closes: https://lore.kernel.org/all/2004baa6-b494-462c-a11f-8104ea152c6a@linux.intel.com
Fixes: a21864486f ("KVM: x86/pmu: Fix available_event_types check for REF_CPU_CYCLES event")
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240109230250.424295-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Implement a workaround for an SNP erratum where the CPU will incorrectly
signal an RMP violation #PF if a hugepage (2MB or 1GB) collides with the
RMP entry of a VMCB, VMSA or AVIC backing page.
When SEV-SNP is globally enabled, the CPU marks the VMCB, VMSA, and AVIC
backing pages as "in-use" via a reserved bit in the corresponding RMP
entry after a successful VMRUN. This is done for _all_ VMs, not just
SNP-Active VMs.
If the hypervisor accesses an in-use page through a writable
translation, the CPU will throw an RMP violation #PF. On early SNP
hardware, if an in-use page is 2MB-aligned and software accesses any
part of the associated 2MB region with a hugepage, the CPU will
incorrectly treat the entire 2MB region as in-use and signal a an RMP
violation #PF.
To avoid this, the recommendation is to not use a 2MB-aligned page for
the VMCB, VMSA or AVIC pages. Add a generic allocator that will ensure
that the page returned is not 2MB-aligned and is safe to be used when
SEV-SNP is enabled. Also implement similar handling for the VMCB/VMSA
pages of nested guests.
[ mdr: Squash in nested guest handling from Ashish, commit msg fixups. ]
Reported-by: Alper Gun <alpergun@google.com> # for nested VMSA case
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Co-developed-by: Marc Orr <marcorr@google.com>
Signed-off-by: Marc Orr <marcorr@google.com>
Co-developed-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/20240126041126.1927228-22-michael.roth@amd.com
Before SNP VMs can be launched, the platform must be appropriately
configured and initialized via the SNP_INIT command.
During the execution of SNP_INIT command, the firmware configures
and enables SNP security policy enforcement in many system components.
Some system components write to regions of memory reserved by early
x86 firmware (e.g. UEFI). Other system components write to regions
provided by the operation system, hypervisor, or x86 firmware.
Such system components can only write to HV-fixed pages or Default
pages. They will error when attempting to write to pages in other page
states after SNP_INIT enables their SNP enforcement.
Starting in SNP firmware v1.52, the SNP_INIT_EX command takes a list of
system physical address ranges to convert into the HV-fixed page states
during the RMP initialization. If INIT_RMP is 1, hypervisors should
provide all system physical address ranges that the hypervisor will
never assign to a guest until the next RMP re-initialization.
For instance, the memory that UEFI reserves should be included in the
range list. This allows system components that occasionally write to
memory (e.g. logging to UEFI reserved regions) to not fail due to
RMP initialization and SNP enablement.
Note that SNP_INIT(_EX) must not be executed while non-SEV guests are
executing, otherwise it is possible that the system could reset or hang.
The psp_init_on_probe module parameter was added for SEV/SEV-ES support
and the init_ex_path module parameter to allow for time for the
necessary file system to be mounted/available.
SNP_INIT(_EX) does not use the file associated with init_ex_path. So, to
avoid running into issues where SNP_INIT(_EX) is called while there are
other running guests, issue it during module probe regardless of the
psp_init_on_probe setting, but maintain the previous deferrable handling
for SEV/SEV-ES initialization.
[ mdr: Squash in psp_init_on_probe changes from Tom, reduce
proliferation of 'probe' function parameter where possible.
bp: Fix 32-bit allmodconfig build. ]
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Co-developed-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Co-developed-by: Jarkko Sakkinen <jarkko@profian.com>
Signed-off-by: Jarkko Sakkinen <jarkko@profian.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240126041126.1927228-14-michael.roth@amd.com
- Use memdup_array_user() to harden against overflow.
- Unconditionally advertise KVM_CAP_DEVICE_CTRL for all architectures.
- Clean up Kconfigs that all KVM architectures were selecting
- New functionality around "guest_memfd", a new userspace API that
creates an anonymous file and returns a file descriptor that refers
to it. guest_memfd files are bound to their owning virtual machine,
cannot be mapped, read, or written by userspace, and cannot be resized.
guest_memfd files do however support PUNCH_HOLE, which can be used to
switch a memory area between guest_memfd and regular anonymous memory.
- New ioctl KVM_SET_MEMORY_ATTRIBUTES allowing userspace to specify
per-page attributes for a given page of guest memory; right now the
only attribute is whether the guest expects to access memory via
guest_memfd or not, which in Confidential SVMs backed by SEV-SNP,
TDX or ARM64 pKVM is checked by firmware or hypervisor that guarantees
confidentiality (AMD PSP, Intel TDX module, or EL2 in the case of pKVM).
x86:
- Support for "software-protected VMs" that can use the new guest_memfd
and page attributes infrastructure. This is mostly useful for testing,
since there is no pKVM-like infrastructure to provide a meaningfully
reduced TCB.
- Fix a relatively benign off-by-one error when splitting huge pages during
CLEAR_DIRTY_LOG.
- Fix a bug where KVM could incorrectly test-and-clear dirty bits in non-leaf
TDP MMU SPTEs if a racing thread replaces a huge SPTE with a non-huge SPTE.
- Use more generic lockdep assertions in paths that don't actually care
about whether the caller is a reader or a writer.
- let Xen guests opt out of having PV clock reported as "based on a stable TSC",
because some of them don't expect the "TSC stable" bit (added to the pvclock
ABI by KVM, but never set by Xen) to be set.
- Revert a bogus, made-up nested SVM consistency check for TLB_CONTROL.
- Advertise flush-by-ASID support for nSVM unconditionally, as KVM always
flushes on nested transitions, i.e. always satisfies flush requests. This
allows running bleeding edge versions of VMware Workstation on top of KVM.
- Sanity check that the CPU supports flush-by-ASID when enabling SEV support.
- On AMD machines with vNMI, always rely on hardware instead of intercepting
IRET in some cases to detect unmasking of NMIs
- Support for virtualizing Linear Address Masking (LAM)
- Fix a variety of vPMU bugs where KVM fail to stop/reset counters and other state
prior to refreshing the vPMU model.
- Fix a double-overflow PMU bug by tracking emulated counter events using a
dedicated field instead of snapshotting the "previous" counter. If the
hardware PMC count triggers overflow that is recognized in the same VM-Exit
that KVM manually bumps an event count, KVM would pend PMIs for both the
hardware-triggered overflow and for KVM-triggered overflow.
- Turn off KVM_WERROR by default for all configs so that it's not
inadvertantly enabled by non-KVM developers, which can be problematic for
subsystems that require no regressions for W=1 builds.
- Advertise all of the host-supported CPUID bits that enumerate IA32_SPEC_CTRL
"features".
- Don't force a masterclock update when a vCPU synchronizes to the current TSC
generation, as updating the masterclock can cause kvmclock's time to "jump"
unexpectedly, e.g. when userspace hotplugs a pre-created vCPU.
- Use RIP-relative address to read kvm_rebooting in the VM-Enter fault paths,
partly as a super minor optimization, but mostly to make KVM play nice with
position independent executable builds.
- Guard KVM-on-HyperV's range-based TLB flush hooks with an #ifdef on
CONFIG_HYPERV as a minor optimization, and to self-document the code.
- Add CONFIG_KVM_HYPERV to allow disabling KVM support for HyperV "emulation"
at build time.
ARM64:
- LPA2 support, adding 52bit IPA/PA capability for 4kB and 16kB
base granule sizes. Branch shared with the arm64 tree.
- Large Fine-Grained Trap rework, bringing some sanity to the
feature, although there is more to come. This comes with
a prefix branch shared with the arm64 tree.
- Some additional Nested Virtualization groundwork, mostly
introducing the NV2 VNCR support and retargetting the NV
support to that version of the architecture.
- A small set of vgic fixes and associated cleanups.
Loongarch:
- Optimization for memslot hugepage checking
- Cleanup and fix some HW/SW timer issues
- Add LSX/LASX (128bit/256bit SIMD) support
RISC-V:
- KVM_GET_REG_LIST improvement for vector registers
- Generate ISA extension reg_list using macros in get-reg-list selftest
- Support for reporting steal time along with selftest
s390:
- Bugfixes
Selftests:
- Fix an annoying goof where the NX hugepage test prints out garbage
instead of the magic token needed to run the test.
- Fix build errors when a header is delete/moved due to a missing flag
in the Makefile.
- Detect if KVM bugged/killed a selftest's VM and print out a helpful
message instead of complaining that a random ioctl() failed.
- Annotate the guest printf/assert helpers with __printf(), and fix the
various bugs that were lurking due to lack of said annotation.
There are two non-KVM patches buried in the middle of guest_memfd support:
fs: Rename anon_inode_getfile_secure() and anon_inode_getfd_secure()
mm: Add AS_UNMOVABLE to mark mapping as completely unmovable
The first is small and mostly suggested-by Christian Brauner; the second
a bit less so but it was written by an mm person (Vlastimil Babka).
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmWcMWkUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroO15gf/WLmmg3SET6Uzw9iEq2xo28831ZA+
6kpILfIDGKozV5safDmMvcInlc/PTnqOFrsKyyN4kDZ+rIJiafJdg/loE0kPXBML
wdR+2ix5kYI1FucCDaGTahskBDz8Lb/xTpwGg9BFLYFNmuUeHc74o6GoNvr1uliE
4kLZL2K6w0cSMPybUD+HqGaET80ZqPwecv+s1JL+Ia0kYZJONJifoHnvOUJ7DpEi
rgudVdgzt3EPjG0y1z6MjvDBXTCOLDjXajErlYuZD3Ej8N8s59Dh2TxOiDNTLdP4
a4zjRvDmgyr6H6sz+upvwc7f4M4p+DBvf+TkWF54mbeObHUYliStqURIoA==
=66Ws
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"Generic:
- Use memdup_array_user() to harden against overflow.
- Unconditionally advertise KVM_CAP_DEVICE_CTRL for all
architectures.
- Clean up Kconfigs that all KVM architectures were selecting
- New functionality around "guest_memfd", a new userspace API that
creates an anonymous file and returns a file descriptor that refers
to it. guest_memfd files are bound to their owning virtual machine,
cannot be mapped, read, or written by userspace, and cannot be
resized. guest_memfd files do however support PUNCH_HOLE, which can
be used to switch a memory area between guest_memfd and regular
anonymous memory.
- New ioctl KVM_SET_MEMORY_ATTRIBUTES allowing userspace to specify
per-page attributes for a given page of guest memory; right now the
only attribute is whether the guest expects to access memory via
guest_memfd or not, which in Confidential SVMs backed by SEV-SNP,
TDX or ARM64 pKVM is checked by firmware or hypervisor that
guarantees confidentiality (AMD PSP, Intel TDX module, or EL2 in
the case of pKVM).
x86:
- Support for "software-protected VMs" that can use the new
guest_memfd and page attributes infrastructure. This is mostly
useful for testing, since there is no pKVM-like infrastructure to
provide a meaningfully reduced TCB.
- Fix a relatively benign off-by-one error when splitting huge pages
during CLEAR_DIRTY_LOG.
- Fix a bug where KVM could incorrectly test-and-clear dirty bits in
non-leaf TDP MMU SPTEs if a racing thread replaces a huge SPTE with
a non-huge SPTE.
- Use more generic lockdep assertions in paths that don't actually
care about whether the caller is a reader or a writer.
- let Xen guests opt out of having PV clock reported as "based on a
stable TSC", because some of them don't expect the "TSC stable" bit
(added to the pvclock ABI by KVM, but never set by Xen) to be set.
- Revert a bogus, made-up nested SVM consistency check for
TLB_CONTROL.
- Advertise flush-by-ASID support for nSVM unconditionally, as KVM
always flushes on nested transitions, i.e. always satisfies flush
requests. This allows running bleeding edge versions of VMware
Workstation on top of KVM.
- Sanity check that the CPU supports flush-by-ASID when enabling SEV
support.
- On AMD machines with vNMI, always rely on hardware instead of
intercepting IRET in some cases to detect unmasking of NMIs
- Support for virtualizing Linear Address Masking (LAM)
- Fix a variety of vPMU bugs where KVM fail to stop/reset counters
and other state prior to refreshing the vPMU model.
- Fix a double-overflow PMU bug by tracking emulated counter events
using a dedicated field instead of snapshotting the "previous"
counter. If the hardware PMC count triggers overflow that is
recognized in the same VM-Exit that KVM manually bumps an event
count, KVM would pend PMIs for both the hardware-triggered overflow
and for KVM-triggered overflow.
- Turn off KVM_WERROR by default for all configs so that it's not
inadvertantly enabled by non-KVM developers, which can be
problematic for subsystems that require no regressions for W=1
builds.
- Advertise all of the host-supported CPUID bits that enumerate
IA32_SPEC_CTRL "features".
- Don't force a masterclock update when a vCPU synchronizes to the
current TSC generation, as updating the masterclock can cause
kvmclock's time to "jump" unexpectedly, e.g. when userspace
hotplugs a pre-created vCPU.
- Use RIP-relative address to read kvm_rebooting in the VM-Enter
fault paths, partly as a super minor optimization, but mostly to
make KVM play nice with position independent executable builds.
- Guard KVM-on-HyperV's range-based TLB flush hooks with an #ifdef on
CONFIG_HYPERV as a minor optimization, and to self-document the
code.
- Add CONFIG_KVM_HYPERV to allow disabling KVM support for HyperV
"emulation" at build time.
ARM64:
- LPA2 support, adding 52bit IPA/PA capability for 4kB and 16kB base
granule sizes. Branch shared with the arm64 tree.
- Large Fine-Grained Trap rework, bringing some sanity to the
feature, although there is more to come. This comes with a prefix
branch shared with the arm64 tree.
- Some additional Nested Virtualization groundwork, mostly
introducing the NV2 VNCR support and retargetting the NV support to
that version of the architecture.
- A small set of vgic fixes and associated cleanups.
Loongarch:
- Optimization for memslot hugepage checking
- Cleanup and fix some HW/SW timer issues
- Add LSX/LASX (128bit/256bit SIMD) support
RISC-V:
- KVM_GET_REG_LIST improvement for vector registers
- Generate ISA extension reg_list using macros in get-reg-list
selftest
- Support for reporting steal time along with selftest
s390:
- Bugfixes
Selftests:
- Fix an annoying goof where the NX hugepage test prints out garbage
instead of the magic token needed to run the test.
- Fix build errors when a header is delete/moved due to a missing
flag in the Makefile.
- Detect if KVM bugged/killed a selftest's VM and print out a helpful
message instead of complaining that a random ioctl() failed.
- Annotate the guest printf/assert helpers with __printf(), and fix
the various bugs that were lurking due to lack of said annotation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (185 commits)
x86/kvm: Do not try to disable kvmclock if it was not enabled
KVM: x86: add missing "depends on KVM"
KVM: fix direction of dependency on MMU notifiers
KVM: introduce CONFIG_KVM_COMMON
KVM: arm64: Add missing memory barriers when switching to pKVM's hyp pgd
KVM: arm64: vgic-its: Avoid potential UAF in LPI translation cache
RISC-V: KVM: selftests: Add get-reg-list test for STA registers
RISC-V: KVM: selftests: Add steal_time test support
RISC-V: KVM: selftests: Add guest_sbi_probe_extension
RISC-V: KVM: selftests: Move sbi_ecall to processor.c
RISC-V: KVM: Implement SBI STA extension
RISC-V: KVM: Add support for SBI STA registers
RISC-V: KVM: Add support for SBI extension registers
RISC-V: KVM: Add SBI STA info to vcpu_arch
RISC-V: KVM: Add steal-update vcpu request
RISC-V: KVM: Add SBI STA extension skeleton
RISC-V: paravirt: Implement steal-time support
RISC-V: Add SBI STA extension definitions
RISC-V: paravirt: Add skeleton for pv-time support
RISC-V: KVM: Fix indentation in kvm_riscv_vcpu_set_reg_csr()
...
Step 5/10 of the namespace unification of CPU mitigations related Kconfig options.
[ mingo: Converted a few more uses in comments/messages as well. ]
Suggested-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ariel Miculas <amiculas@cisco.com>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20231121160740.1249350-6-leitao@debian.org
- A micro-optimization got misplaced as a cleanup:
- Micro-optimize the asm code in secondary_startup_64_no_verify()
- Change global variables to local
- Add missing kernel-doc function parameter descriptions
- Remove unused parameter from a macro
- Remove obsolete Kconfig entry
- Fix comments
- Fix typos, mostly scripted, manually reviewed
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=kUav
-----END PGP SIGNATURE-----
Merge tag 'x86-cleanups-2024-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Ingo Molnar:
- Change global variables to local
- Add missing kernel-doc function parameter descriptions
- Remove unused parameter from a macro
- Remove obsolete Kconfig entry
- Fix comments
- Fix typos, mostly scripted, manually reviewed
and a micro-optimization got misplaced as a cleanup:
- Micro-optimize the asm code in secondary_startup_64_no_verify()
* tag 'x86-cleanups-2024-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
arch/x86: Fix typos
x86/head_64: Use TESTB instead of TESTL in secondary_startup_64_no_verify()
x86/docs: Remove reference to syscall trampoline in PTI
x86/Kconfig: Remove obsolete config X86_32_SMP
x86/io: Remove the unused 'bw' parameter from the BUILDIO() macro
x86/mtrr: Document missing function parameters in kernel-doc
x86/setup: Make relocated_ramdisk a local variable of relocate_initrd()
- Revert a bogus, made-up nested SVM consistency check for TLB_CONTROL.
- Advertise flush-by-ASID support for nSVM unconditionally, as KVM always
flushes on nested transitions, i.e. always satisfies flush requests. This
allows running bleeding edge versions of VMware Workstation on top of KVM.
- Sanity check that the CPU supports flush-by-ASID when enabling SEV support.
- Fix a benign NMI virtualization bug where KVM would unnecessarily intercept
IRET when manually injecting an NMI, e.g. when KVM pends an NMI and injects
a second, "simultaneous" NMI.
-----BEGIN PGP SIGNATURE-----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=mXEf
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-svm-6.8' of https://github.com/kvm-x86/linux into HEAD
KVM SVM changes for 6.8:
- Revert a bogus, made-up nested SVM consistency check for TLB_CONTROL.
- Advertise flush-by-ASID support for nSVM unconditionally, as KVM always
flushes on nested transitions, i.e. always satisfies flush requests. This
allows running bleeding edge versions of VMware Workstation on top of KVM.
- Sanity check that the CPU supports flush-by-ASID when enabling SEV support.
- Fix a benign NMI virtualization bug where KVM would unnecessarily intercept
IRET when manually injecting an NMI, e.g. when KVM pends an NMI and injects
a second, "simultaneous" NMI.
Add KVM support for Linear Address Masking (LAM). LAM tweaks the canonicality
checks for most virtual address usage in 64-bit mode, such that only the most
significant bit of the untranslated address bits must match the polarity of the
last translated address bit. This allows software to use ignored, untranslated
address bits for metadata, e.g. to efficiently tag pointers for address
sanitization.
LAM can be enabled separately for user pointers and supervisor pointers, and
for userspace LAM can be select between 48-bit and 57-bit masking
- 48-bit LAM: metadata bits 62:48, i.e. LAM width of 15.
- 57-bit LAM: metadata bits 62:57, i.e. LAM width of 6.
For user pointers, LAM enabling utilizes two previously-reserved high bits from
CR3 (similar to how PCID_NOFLUSH uses bit 63): LAM_U48 and LAM_U57, bits 62 and
61 respectively. Note, if LAM_57 is set, LAM_U48 is ignored, i.e.:
- CR3.LAM_U48=0 && CR3.LAM_U57=0 == LAM disabled for user pointers
- CR3.LAM_U48=1 && CR3.LAM_U57=0 == LAM-48 enabled for user pointers
- CR3.LAM_U48=x && CR3.LAM_U57=1 == LAM-57 enabled for user pointers
For supervisor pointers, LAM is controlled by a single bit, CR4.LAM_SUP, with
the 48-bit versus 57-bit LAM behavior following the current paging mode, i.e.:
- CR4.LAM_SUP=0 && CR4.LA57=x == LAM disabled for supervisor pointers
- CR4.LAM_SUP=1 && CR4.LA57=0 == LAM-48 enabled for supervisor pointers
- CR4.LAM_SUP=1 && CR4.LA57=1 == LAM-57 enabled for supervisor pointers
The modified LAM canonicality checks:
- LAM_S48 : [ 1 ][ metadata ][ 1 ]
63 47
- LAM_U48 : [ 0 ][ metadata ][ 0 ]
63 47
- LAM_S57 : [ 1 ][ metadata ][ 1 ]
63 56
- LAM_U57 + 5-lvl paging : [ 0 ][ metadata ][ 0 ]
63 56
- LAM_U57 + 4-lvl paging : [ 0 ][ metadata ][ 0...0 ]
63 56..47
The bulk of KVM support for LAM is to emulate LAM's modified canonicality
checks. The approach taken by KVM is to "fill" the metadata bits using the
highest bit of the translated address, e.g. for LAM-48, bit 47 is sign-extended
to bits 62:48. The most significant bit, 63, is *not* modified, i.e. its value
from the raw, untagged virtual address is kept for the canonicality check. This
untagging allows
Aside from emulating LAM's canonical checks behavior, LAM has the usual KVM
touchpoints for selectable features: enumeration (CPUID.7.1:EAX.LAM[bit 26],
enabling via CR3 and CR4 bits, etc.
-----BEGIN PGP SIGNATURE-----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=qUZ2
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-lam-6.8' of https://github.com/kvm-x86/linux into HEAD
KVM x86 support for virtualizing Linear Address Masking (LAM)
Add KVM support for Linear Address Masking (LAM). LAM tweaks the canonicality
checks for most virtual address usage in 64-bit mode, such that only the most
significant bit of the untranslated address bits must match the polarity of the
last translated address bit. This allows software to use ignored, untranslated
address bits for metadata, e.g. to efficiently tag pointers for address
sanitization.
LAM can be enabled separately for user pointers and supervisor pointers, and
for userspace LAM can be select between 48-bit and 57-bit masking
- 48-bit LAM: metadata bits 62:48, i.e. LAM width of 15.
- 57-bit LAM: metadata bits 62:57, i.e. LAM width of 6.
For user pointers, LAM enabling utilizes two previously-reserved high bits from
CR3 (similar to how PCID_NOFLUSH uses bit 63): LAM_U48 and LAM_U57, bits 62 and
61 respectively. Note, if LAM_57 is set, LAM_U48 is ignored, i.e.:
- CR3.LAM_U48=0 && CR3.LAM_U57=0 == LAM disabled for user pointers
- CR3.LAM_U48=1 && CR3.LAM_U57=0 == LAM-48 enabled for user pointers
- CR3.LAM_U48=x && CR3.LAM_U57=1 == LAM-57 enabled for user pointers
For supervisor pointers, LAM is controlled by a single bit, CR4.LAM_SUP, with
the 48-bit versus 57-bit LAM behavior following the current paging mode, i.e.:
- CR4.LAM_SUP=0 && CR4.LA57=x == LAM disabled for supervisor pointers
- CR4.LAM_SUP=1 && CR4.LA57=0 == LAM-48 enabled for supervisor pointers
- CR4.LAM_SUP=1 && CR4.LA57=1 == LAM-57 enabled for supervisor pointers
The modified LAM canonicality checks:
- LAM_S48 : [ 1 ][ metadata ][ 1 ]
63 47
- LAM_U48 : [ 0 ][ metadata ][ 0 ]
63 47
- LAM_S57 : [ 1 ][ metadata ][ 1 ]
63 56
- LAM_U57 + 5-lvl paging : [ 0 ][ metadata ][ 0 ]
63 56
- LAM_U57 + 4-lvl paging : [ 0 ][ metadata ][ 0...0 ]
63 56..47
The bulk of KVM support for LAM is to emulate LAM's modified canonicality
checks. The approach taken by KVM is to "fill" the metadata bits using the
highest bit of the translated address, e.g. for LAM-48, bit 47 is sign-extended
to bits 62:48. The most significant bit, 63, is *not* modified, i.e. its value
from the raw, untagged virtual address is kept for the canonicality check. This
untagging allows
Aside from emulating LAM's canonical checks behavior, LAM has the usual KVM
touchpoints for selectable features: enumeration (CPUID.7.1:EAX.LAM[bit 26],
enabling via CR3 and CR4 bits, etc.
- Fix a variety of bugs where KVM fail to stop/reset counters and other state
prior to refreshing the vPMU model.
- Fix a double-overflow PMU bug by tracking emulated counter events using a
dedicated field instead of snapshotting the "previous" counter. If the
hardware PMC count triggers overflow that is recognized in the same VM-Exit
that KVM manually bumps an event count, KVM would pend PMIs for both the
hardware-triggered overflow and for KVM-triggered overflow.
-----BEGIN PGP SIGNATURE-----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=+Emh
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-pmu-6.8' of https://github.com/kvm-x86/linux into HEAD
KVM x86 PMU changes for 6.8:
- Fix a variety of bugs where KVM fail to stop/reset counters and other state
prior to refreshing the vPMU model.
- Fix a double-overflow PMU bug by tracking emulated counter events using a
dedicated field instead of snapshotting the "previous" counter. If the
hardware PMC count triggers overflow that is recognized in the same VM-Exit
that KVM manually bumps an event count, KVM would pend PMIs for both the
hardware-triggered overflow and for KVM-triggered overflow.
- Turn off KVM_WERROR by default for all configs so that it's not
inadvertantly enabled by non-KVM developers, which can be problematic for
subsystems that require no regressions for W=1 builds.
- Advertise all of the host-supported CPUID bits that enumerate IA32_SPEC_CTRL
"features".
- Don't force a masterclock update when a vCPU synchronizes to the current TSC
generation, as updating the masterclock can cause kvmclock's time to "jump"
unexpectedly, e.g. when userspace hotplugs a pre-created vCPU.
- Use RIP-relative address to read kvm_rebooting in the VM-Enter fault paths,
partly as a super minor optimization, but mostly to make KVM play nice with
position independent executable builds.
-----BEGIN PGP SIGNATURE-----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=O4hV
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-misc-6.8' of https://github.com/kvm-x86/linux into HEAD
KVM x86 misc changes for 6.8:
- Turn off KVM_WERROR by default for all configs so that it's not
inadvertantly enabled by non-KVM developers, which can be problematic for
subsystems that require no regressions for W=1 builds.
- Advertise all of the host-supported CPUID bits that enumerate IA32_SPEC_CTRL
"features".
- Don't force a masterclock update when a vCPU synchronizes to the current TSC
generation, as updating the masterclock can cause kvmclock's time to "jump"
unexpectedly, e.g. when userspace hotplugs a pre-created vCPU.
- Use RIP-relative address to read kvm_rebooting in the VM-Enter fault paths,
partly as a super minor optimization, but mostly to make KVM play nice with
position independent executable builds.
- Guard KVM-on-HyperV's range-based TLB flush hooks with an #ifdef on
CONFIG_HYPERV as a minor optimization, and to self-document the code.
- Add CONFIG_KVM_HYPERV to allow disabling KVM support for HyperV "emulation"
at build time.
-----BEGIN PGP SIGNATURE-----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=bjfs
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-hyperv-6.8' of https://github.com/kvm-x86/linux into HEAD
KVM x86 Hyper-V changes for 6.8:
- Guard KVM-on-HyperV's range-based TLB flush hooks with an #ifdef on
CONFIG_HYPERV as a minor optimization, and to self-document the code.
- Add CONFIG_KVM_HYPERV to allow disabling KVM support for HyperV "emulation"
at build time.
When intercepts are enabled for MSR_IA32_XSS, the host will swap in/out
the guest-defined values while context-switching to/from guest mode.
However, in the case of SEV-ES, vcpu->arch.guest_state_protected is set,
so the guest-defined value is effectively ignored when switching to
guest mode with the understanding that the VMSA will handle swapping
in/out this register state.
However, SVM is still configured to intercept these accesses for SEV-ES
guests, so the values in the initial MSR_IA32_XSS are effectively
read-only, and a guest will experience undefined behavior if it actually
tries to write to this MSR. Fortunately, only CET/shadowstack makes use
of this register on SEV-ES-capable systems currently, which isn't yet
widely used, but this may become more of an issue in the future.
Additionally, enabling intercepts of MSR_IA32_XSS results in #VC
exceptions in the guest in certain paths that can lead to unexpected #VC
nesting levels. One example is SEV-SNP guests when handling #VC
exceptions for CPUID instructions involving leaf 0xD, subleaf 0x1, since
they will access MSR_IA32_XSS as part of servicing the CPUID #VC, then
generate another #VC when accessing MSR_IA32_XSS, which can lead to
guest crashes if an NMI occurs at that point in time. Running perf on a
guest while it is issuing such a sequence is one example where these can
be problematic.
Address this by disabling intercepts of MSR_IA32_XSS for SEV-ES guests
if the host/guest configuration allows it. If the host/guest
configuration doesn't allow for MSR_IA32_XSS, leave it intercepted so
that it can be caught by the existing checks in
kvm_{set,get}_msr_common() if the guest still attempts to access it.
Fixes: 376c6d2850 ("KVM: SVM: Provide support for SEV-ES vCPU creation/loading")
Cc: Alexey Kardashevskiy <aik@amd.com>
Suggested-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Message-Id: <20231016132819.1002933-4-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In general, activating long mode involves setting the EFER_LME bit in
the EFER register and then enabling the X86_CR0_PG bit in the CR0
register. At this point, the EFER_LMA bit will be set automatically by
hardware.
In the case of SVM/SEV guests where writes to CR0 are intercepted, it's
necessary for the host to set EFER_LMA on behalf of the guest since
hardware does not see the actual CR0 write.
In the case of SEV-ES guests where writes to CR0 are trapped instead of
intercepted, the hardware *does* see/record the write to CR0 before
exiting and passing the value on to the host, so as part of enabling
SEV-ES support commit f1c6366e30 ("KVM: SVM: Add required changes to
support intercepts under SEV-ES") dropped special handling of the
EFER_LMA bit with the understanding that it would be set automatically.
However, since the guest never explicitly sets the EFER_LMA bit, the
host never becomes aware that it has been set. This becomes problematic
when userspace tries to get/set the EFER values via
KVM_GET_SREGS/KVM_SET_SREGS, since the EFER contents tracked by the host
will be missing the EFER_LMA bit, and when userspace attempts to pass
the EFER value back via KVM_SET_SREGS it will fail a sanity check that
asserts that EFER_LMA should always be set when X86_CR0_PG and EFER_LME
are set.
Fix this by always inferring the value of EFER_LMA based on X86_CR0_PG
and EFER_LME, regardless of whether or not SEV-ES is enabled.
Fixes: f1c6366e30 ("KVM: SVM: Add required changes to support intercepts under SEV-ES")
Reported-by: Peter Gonda <pgonda@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210507165947.2502412-2-seanjc@google.com>
[A two year old patch that was revived after we noticed the failure in
KVM_SET_SREGS and a similar patch was posted by Michael Roth. This is
Sean's patch, but with Michael's more complete commit message. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
'struct hv_vmcb_enlightenments' in VMCB only make sense when either
CONFIG_KVM_HYPERV or CONFIG_HYPERV is enabled.
No functional change intended.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Tested-by: Jeremi Piotrowski <jpiotrowski@linux.microsoft.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20231205103630.1391318-17-vkuznets@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Hyper-V emulation in KVM is a fairly big chunk and in some cases it may be
desirable to not compile it in to reduce module sizes as well as the attack
surface. Introduce CONFIG_KVM_HYPERV option to make it possible.
Note, there's room for further nVMX/nSVM code optimizations when
!CONFIG_KVM_HYPERV, this will be done in follow-up patches.
Reorganize Makefile a bit so all CONFIG_HYPERV and CONFIG_KVM_HYPERV files
are grouped together.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Tested-by: Jeremi Piotrowski <jpiotrowski@linux.microsoft.com>
Link: https://lore.kernel.org/r/20231205103630.1391318-13-vkuznets@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
As a preparation to making Hyper-V emulation optional, introduce a helper
to handle pending KVM_REQ_HV_TLB_FLUSH requests.
No functional change intended.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Tested-by: Jeremi Piotrowski <jpiotrowski@linux.microsoft.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20231205103630.1391318-8-vkuznets@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Hyper-V partition assist page is used when KVM runs on top of Hyper-V and
is not used for Windows/Hyper-V guests on KVM, this means that 'hv_pa_pg'
placement in 'struct kvm_hv' is unfortunate. As a preparation to making
Hyper-V emulation optional, move 'hv_pa_pg' to 'struct kvm_arch' and put it
under CONFIG_HYPERV.
While on it, introduce hv_get_partition_assist_page() helper to allocate
partition assist page. Move the comment explaining why we use a single page
for all vCPUs from VMX and expand it a bit.
No functional change intended.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Tested-by: Jeremi Piotrowski <jpiotrowski@linux.microsoft.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20231205103630.1391318-3-vkuznets@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Update a PMC's sample period in pmc_write_counter() to deduplicate code
across all callers of pmc_write_counter(). Opportunistically move
pmc_write_counter() into pmc.c now that it's doing more work. WRMSR isn't
such a hot path that an extra CALL+RET pair will be problematic, and the
order of function definitions needs to be changed anyways, i.e. now is a
convenient time to eat the churn.
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20231103230541.352265-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Move the common (or at least "ignored") aspects of resetting the vPMU to
common x86 code, along with the stop/release helpers that are no used only
by the common pmu.c.
There is no need to manually handle fixed counters as all_valid_pmc_idx
tracks both fixed and general purpose counters, and resetting the vPMU is
far from a hot path, i.e. the extra bit of overhead to the PMC from the
index is a non-issue.
Zero fixed_ctr_ctrl in common code even though it's Intel specific.
Ensuring it's zero doesn't harm AMD/SVM in any way, and stopping the fixed
counters via all_valid_pmc_idx, but not clearing the associated control
bits, would be odd/confusing.
Make the .reset() hook optional as SVM no longer needs vendor specific
handling.
Cc: stable@vger.kernel.org
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20231103230541.352265-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Instruction with %rip-relative address operand is one byte shorter than
its absolute address counterpart and is also compatible with position
independent executable (-fpie) build.
No functional changes intended.
Cc: Sean Christopherson <seanjc@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Link: https://lore.kernel.org/r/20231031075312.47525-1-ubizjak@gmail.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
When vNMI is enabled, rely entirely on hardware to correctly handle NMI
blocking, i.e. don't intercept IRET to detect when NMIs are no longer
blocked. KVM already correctly ignores svm->nmi_masked when vNMI is
enabled, so the effect of the bug is essentially an unnecessary VM-Exit.
KVM intercepts IRET for two reasons:
- To track NMI masking to be able to know at any point of time if NMI
is masked.
- To track NMI windows (to inject another NMI after the guest executes
IRET, i.e. unblocks NMIs)
When vNMI is enabled, both cases are handled by hardware:
- NMI masking state resides in int_ctl.V_NMI_BLOCKING and can be read by
KVM at will.
- Hardware automatically "injects" pending virtual NMIs when virtual NMIs
become unblocked.
However, even though pending a virtual NMI for hardware to handle is the
most common way to synthesize a guest NMI, KVM may still directly inject
an NMI via when KVM is handling two "simultaneous" NMIs (see comments in
process_nmi() for details on KVM's simultaneous NMI handling). Per AMD's
APM, hardware sets the BLOCKING flag when software directly injects an NMI
as well, i.e. KVM doesn't need to manually mark vNMIs as blocked:
If Event Injection is used to inject an NMI when NMI Virtualization is
enabled, VMRUN sets V_NMI_MASK in the guest state.
Note, it's still possible that KVM could trigger a spurious IRET VM-Exit.
When running a nested guest, KVM disables vNMI for L2 and thus will enable
IRET interception (in both vmcb01 and vmcb02) while running L2 reason. If
a nested VM-Exit happens before L2 executes IRET, KVM can end up running
L1 with vNMI enable and IRET intercepted. This is also a benign bug, and
even less likely to happen, i.e. can be safely punted to a future fix.
Fixes: fa4c027a79 ("KVM: x86: Add support for SVM's Virtual NMI")
Link: https://lore.kernel.org/all/ZOdnuDZUd4mevCqe@google.como
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Tested-by: Santosh Shukla <santosh.shukla@amd.com>
Link: https://lore.kernel.org/r/20231018192021.1893261-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a sanity check that FLUSHBYASID is available if SEV is supported in
hardware, as SEV (and beyond) guests are bound to a single ASID, i.e. KVM
can't "flush" by assigning a new, fresh ASID to the guest. If FLUSHBYASID
isn't supported for some bizarre reason, KVM would completely fail to do
TLB flushes for SEV+ guests (see pre_svm_run() and pre_sev_run()).
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20231018193617.1895752-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Advertise support for FLUSHBYASID when nested SVM is enabled, as KVM can
always emulate flushing TLB entries for a vmcb12 ASID, e.g. by running L2
with a new, fresh ASID in vmcb02. Some modern hypervisors, e.g. VMWare
Workstation 17, require FLUSHBYASID support and will refuse to run if it's
not present.
Punt on proper support, as "Honor L1's request to flush an ASID on nested
VMRUN" is one of the TODO items in the (incomplete) list of issues that
need to be addressed in order for KVM to NOT do a full TLB flush on every
nested SVM transition (see nested_svm_transition_tlb_flush()).
Reported-by: Stefan Sterz <s.sterz@proxmox.com>
Closes: https://lkml.kernel.org/r/b9915c9c-4cf6-051a-2d91-44cc6380f455%40proxmox.com
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20231018194104.1896415-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Revert KVM's made-up consistency check on SVM's TLB control. The APM says
that unsupported encodings are reserved, but the APM doesn't state that
VMRUN checks for a supported encoding. Unless something is called out
in "Canonicalization and Consistency Checks" or listed as MBZ (Must Be
Zero), AMD behavior is typically to let software shoot itself in the foot.
This reverts commit 174a921b69.
Fixes: 174a921b69 ("nSVM: Check for reserved encodings of TLB_CONTROL in nested VMCB")
Reported-by: Stefan Sterz <s.sterz@proxmox.com>
Closes: https://lkml.kernel.org/r/b9915c9c-4cf6-051a-2d91-44cc6380f455%40proxmox.com
Cc: stable@vger.kernel.org
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20231018194104.1896415-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add and use kvm_vcpu_is_legal_cr3() to check CR3's legality to provide
a clear distinction between CR3 and GPA checks. This will allow exempting
bits from kvm_vcpu_is_legal_cr3() without affecting general GPA checks,
e.g. for upcoming features that will use high bits in CR3 for feature
enabling.
No functional change intended.
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
Tested-by: Xuelian Guo <xuelian.guo@intel.com>
Link: https://lore.kernel.org/r/20230913124227.12574-7-binbin.wu@linux.intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
* Generalized infrastructure for 'writable' ID registers, effectively
allowing userspace to opt-out of certain vCPU features for its guest
* Optimization for vSGI injection, opportunistically compressing MPIDR
to vCPU mapping into a table
* Improvements to KVM's PMU emulation, allowing userspace to select
the number of PMCs available to a VM
* Guest support for memory operation instructions (FEAT_MOPS)
* Cleanups to handling feature flags in KVM_ARM_VCPU_INIT, squashing
bugs and getting rid of useless code
* Changes to the way the SMCCC filter is constructed, avoiding wasted
memory allocations when not in use
* Load the stage-2 MMU context at vcpu_load() for VHE systems, reducing
the overhead of errata mitigations
* Miscellaneous kernel and selftest fixes
LoongArch:
* New architecture. The hardware uses the same model as x86, s390
and RISC-V, where guest/host mode is orthogonal to supervisor/user
mode. The virtualization extensions are very similar to MIPS,
therefore the code also has some similarities but it's been cleaned
up to avoid some of the historical bogosities that are found in
arch/mips. The kernel emulates MMU, timer and CSR accesses, while
interrupt controllers are only emulated in userspace, at least for
now.
RISC-V:
* Support for the Smstateen and Zicond extensions
* Support for virtualizing senvcfg
* Support for virtualized SBI debug console (DBCN)
S390:
* Nested page table management can be monitored through tracepoints
and statistics
x86:
* Fix incorrect handling of VMX posted interrupt descriptor in KVM_SET_LAPIC,
which could result in a dropped timer IRQ
* Avoid WARN on systems with Intel IPI virtualization
* Add CONFIG_KVM_MAX_NR_VCPUS, to allow supporting up to 4096 vCPUs without
forcing more common use cases to eat the extra memory overhead.
* Add virtualization support for AMD SRSO mitigation (IBPB_BRTYPE and
SBPB, aka Selective Branch Predictor Barrier).
* Fix a bug where restoring a vCPU snapshot that was taken within 1 second of
creating the original vCPU would cause KVM to try to synchronize the vCPU's
TSC and thus clobber the correct TSC being set by userspace.
* Compute guest wall clock using a single TSC read to avoid generating an
inaccurate time, e.g. if the vCPU is preempted between multiple TSC reads.
* "Virtualize" HWCR.TscFreqSel to make Linux guests happy, which complain
about a "Firmware Bug" if the bit isn't set for select F/M/S combos.
Likewise "virtualize" (ignore) MSR_AMD64_TW_CFG to appease Windows Server
2022.
* Don't apply side effects to Hyper-V's synthetic timer on writes from
userspace to fix an issue where the auto-enable behavior can trigger
spurious interrupts, i.e. do auto-enabling only for guest writes.
* Remove an unnecessary kick of all vCPUs when synchronizing the dirty log
without PML enabled.
* Advertise "support" for non-serializing FS/GS base MSR writes as appropriate.
* Harden the fast page fault path to guard against encountering an invalid
root when walking SPTEs.
* Omit "struct kvm_vcpu_xen" entirely when CONFIG_KVM_XEN=n.
* Use the fast path directly from the timer callback when delivering Xen
timer events, instead of waiting for the next iteration of the run loop.
This was not done so far because previously proposed code had races,
but now care is taken to stop the hrtimer at critical points such as
restarting the timer or saving the timer information for userspace.
* Follow the lead of upstream Xen and ignore the VCPU_SSHOTTMR_future flag.
* Optimize injection of PMU interrupts that are simultaneous with NMIs.
* Usual handful of fixes for typos and other warts.
x86 - MTRR/PAT fixes and optimizations:
* Clean up code that deals with honoring guest MTRRs when the VM has
non-coherent DMA and host MTRRs are ignored, i.e. EPT is enabled.
* Zap EPT entries when non-coherent DMA assignment stops/start to prevent
using stale entries with the wrong memtype.
* Don't ignore guest PAT for CR0.CD=1 && KVM_X86_QUIRK_CD_NW_CLEARED=y.
This was done as a workaround for virtual machine BIOSes that did not
bother to clear CR0.CD (because ancient KVM/QEMU did not bother to
set it, in turn), and there's zero reason to extend the quirk to
also ignore guest PAT.
x86 - SEV fixes:
* Report KVM_EXIT_SHUTDOWN instead of EINVAL if KVM intercepts SHUTDOWN while
running an SEV-ES guest.
* Clean up the recognition of emulation failures on SEV guests, when KVM would
like to "skip" the instruction but it had already been partially emulated.
This makes it possible to drop a hack that second guessed the (insufficient)
information provided by the emulator, and just do the right thing.
Documentation:
* Various updates and fixes, mostly for x86
* MTRR and PAT fixes and optimizations:
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmVBZc0UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroP1LQf+NgsmZ1lkGQlKdSdijoQ856w+k0or
l2SV1wUwiEdFPSGK+RTUlHV5Y1ni1dn/CqCVIJZKEI3ZtZ1m9/4HKIRXvbMwFHIH
hx+E4Lnf8YUjsGjKTLd531UKcpphztZavQ6pXLEwazkSkDEra+JIKtooI8uU+9/p
bd/eF1V+13a8CHQf1iNztFJVxqBJbVlnPx4cZDRQQvewskIDGnVDtwbrwCUKGtzD
eNSzhY7si6O2kdQNkuA8xPhg29dYX9XLaCK2K1l8xOUm8WipLdtF86GAKJ5BVuOL
6ek/2QCYjZ7a+coAZNfgSEUi8JmFHEqCo7cnKmWzPJp+2zyXsdudqAhT1g==
=UIxm
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- Generalized infrastructure for 'writable' ID registers, effectively
allowing userspace to opt-out of certain vCPU features for its
guest
- Optimization for vSGI injection, opportunistically compressing
MPIDR to vCPU mapping into a table
- Improvements to KVM's PMU emulation, allowing userspace to select
the number of PMCs available to a VM
- Guest support for memory operation instructions (FEAT_MOPS)
- Cleanups to handling feature flags in KVM_ARM_VCPU_INIT, squashing
bugs and getting rid of useless code
- Changes to the way the SMCCC filter is constructed, avoiding wasted
memory allocations when not in use
- Load the stage-2 MMU context at vcpu_load() for VHE systems,
reducing the overhead of errata mitigations
- Miscellaneous kernel and selftest fixes
LoongArch:
- New architecture for kvm.
The hardware uses the same model as x86, s390 and RISC-V, where
guest/host mode is orthogonal to supervisor/user mode. The
virtualization extensions are very similar to MIPS, therefore the
code also has some similarities but it's been cleaned up to avoid
some of the historical bogosities that are found in arch/mips. The
kernel emulates MMU, timer and CSR accesses, while interrupt
controllers are only emulated in userspace, at least for now.
RISC-V:
- Support for the Smstateen and Zicond extensions
- Support for virtualizing senvcfg
- Support for virtualized SBI debug console (DBCN)
S390:
- Nested page table management can be monitored through tracepoints
and statistics
x86:
- Fix incorrect handling of VMX posted interrupt descriptor in
KVM_SET_LAPIC, which could result in a dropped timer IRQ
- Avoid WARN on systems with Intel IPI virtualization
- Add CONFIG_KVM_MAX_NR_VCPUS, to allow supporting up to 4096 vCPUs
without forcing more common use cases to eat the extra memory
overhead.
- Add virtualization support for AMD SRSO mitigation (IBPB_BRTYPE and
SBPB, aka Selective Branch Predictor Barrier).
- Fix a bug where restoring a vCPU snapshot that was taken within 1
second of creating the original vCPU would cause KVM to try to
synchronize the vCPU's TSC and thus clobber the correct TSC being
set by userspace.
- Compute guest wall clock using a single TSC read to avoid
generating an inaccurate time, e.g. if the vCPU is preempted
between multiple TSC reads.
- "Virtualize" HWCR.TscFreqSel to make Linux guests happy, which
complain about a "Firmware Bug" if the bit isn't set for select
F/M/S combos. Likewise "virtualize" (ignore) MSR_AMD64_TW_CFG to
appease Windows Server 2022.
- Don't apply side effects to Hyper-V's synthetic timer on writes
from userspace to fix an issue where the auto-enable behavior can
trigger spurious interrupts, i.e. do auto-enabling only for guest
writes.
- Remove an unnecessary kick of all vCPUs when synchronizing the
dirty log without PML enabled.
- Advertise "support" for non-serializing FS/GS base MSR writes as
appropriate.
- Harden the fast page fault path to guard against encountering an
invalid root when walking SPTEs.
- Omit "struct kvm_vcpu_xen" entirely when CONFIG_KVM_XEN=n.
- Use the fast path directly from the timer callback when delivering
Xen timer events, instead of waiting for the next iteration of the
run loop. This was not done so far because previously proposed code
had races, but now care is taken to stop the hrtimer at critical
points such as restarting the timer or saving the timer information
for userspace.
- Follow the lead of upstream Xen and ignore the VCPU_SSHOTTMR_future
flag.
- Optimize injection of PMU interrupts that are simultaneous with
NMIs.
- Usual handful of fixes for typos and other warts.
x86 - MTRR/PAT fixes and optimizations:
- Clean up code that deals with honoring guest MTRRs when the VM has
non-coherent DMA and host MTRRs are ignored, i.e. EPT is enabled.
- Zap EPT entries when non-coherent DMA assignment stops/start to
prevent using stale entries with the wrong memtype.
- Don't ignore guest PAT for CR0.CD=1 && KVM_X86_QUIRK_CD_NW_CLEARED=y
This was done as a workaround for virtual machine BIOSes that did
not bother to clear CR0.CD (because ancient KVM/QEMU did not bother
to set it, in turn), and there's zero reason to extend the quirk to
also ignore guest PAT.
x86 - SEV fixes:
- Report KVM_EXIT_SHUTDOWN instead of EINVAL if KVM intercepts
SHUTDOWN while running an SEV-ES guest.
- Clean up the recognition of emulation failures on SEV guests, when
KVM would like to "skip" the instruction but it had already been
partially emulated. This makes it possible to drop a hack that
second guessed the (insufficient) information provided by the
emulator, and just do the right thing.
Documentation:
- Various updates and fixes, mostly for x86
- MTRR and PAT fixes and optimizations"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (164 commits)
KVM: selftests: Avoid using forced target for generating arm64 headers
tools headers arm64: Fix references to top srcdir in Makefile
KVM: arm64: Add tracepoint for MMIO accesses where ISV==0
KVM: arm64: selftest: Perform ISB before reading PAR_EL1
KVM: arm64: selftest: Add the missing .guest_prepare()
KVM: arm64: Always invalidate TLB for stage-2 permission faults
KVM: x86: Service NMI requests after PMI requests in VM-Enter path
KVM: arm64: Handle AArch32 SPSR_{irq,abt,und,fiq} as RAZ/WI
KVM: arm64: Do not let a L1 hypervisor access the *32_EL2 sysregs
KVM: arm64: Refine _EL2 system register list that require trap reinjection
arm64: Add missing _EL2 encodings
arm64: Add missing _EL12 encodings
KVM: selftests: aarch64: vPMU test for validating user accesses
KVM: selftests: aarch64: vPMU register test for unimplemented counters
KVM: selftests: aarch64: vPMU register test for implemented counters
KVM: selftests: aarch64: Introduce vpmu_counter_access test
tools: Import arm_pmuv3.h
KVM: arm64: PMU: Allow userspace to limit PMCR_EL0.N for the guest
KVM: arm64: Sanitize PM{C,I}NTEN{SET,CLR}, PMOVS{SET,CLR} before first run
KVM: arm64: Add {get,set}_user for PM{C,I}NTEN{SET,CLR}, PMOVS{SET,CLR}
...
- Report KVM_EXIT_SHUTDOWN instead of EINVAL if KVM intercepts SHUTDOWN while
running an SEV-ES guest.
- Clean up handling "failures" when KVM detects it can't emulate the "skip"
action for an instruction that has already been partially emulated. Drop a
hack in the SVM code that was fudging around the emulator code not giving
SVM enough information to do the right thing.
-----BEGIN PGP SIGNATURE-----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=U0fq
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-svm-6.7' of https://github.com/kvm-x86/linux into HEAD
KVM SVM changes for 6.7:
- Report KVM_EXIT_SHUTDOWN instead of EINVAL if KVM intercepts SHUTDOWN while
running an SEV-ES guest.
- Clean up handling "failures" when KVM detects it can't emulate the "skip"
action for an instruction that has already been partially emulated. Drop a
hack in the SVM code that was fudging around the emulator code not giving
SVM enough information to do the right thing.
- Add CONFIG_KVM_MAX_NR_VCPUS to allow supporting up to 4096 vCPUs without
forcing more common use cases to eat the extra memory overhead.
- Add IBPB and SBPB virtualization support.
- Fix a bug where restoring a vCPU snapshot that was taken within 1 second of
creating the original vCPU would cause KVM to try to synchronize the vCPU's
TSC and thus clobber the correct TSC being set by userspace.
- Compute guest wall clock using a single TSC read to avoid generating an
inaccurate time, e.g. if the vCPU is preempted between multiple TSC reads.
- "Virtualize" HWCR.TscFreqSel to make Linux guests happy, which complain
about a "Firmware Bug" if the bit isn't set for select F/M/S combos.
- Don't apply side effects to Hyper-V's synthetic timer on writes from
userspace to fix an issue where the auto-enable behavior can trigger
spurious interrupts, i.e. do auto-enabling only for guest writes.
- Remove an unnecessary kick of all vCPUs when synchronizing the dirty log
without PML enabled.
- Advertise "support" for non-serializing FS/GS base MSR writes as appropriate.
- Use octal notation for file permissions through KVM x86.
- Fix a handful of typo fixes and warts.
-----BEGIN PGP SIGNATURE-----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=sfp8
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-misc-6.7' of https://github.com/kvm-x86/linux into HEAD
KVM x86 misc changes for 6.7:
- Add CONFIG_KVM_MAX_NR_VCPUS to allow supporting up to 4096 vCPUs without
forcing more common use cases to eat the extra memory overhead.
- Add IBPB and SBPB virtualization support.
- Fix a bug where restoring a vCPU snapshot that was taken within 1 second of
creating the original vCPU would cause KVM to try to synchronize the vCPU's
TSC and thus clobber the correct TSC being set by userspace.
- Compute guest wall clock using a single TSC read to avoid generating an
inaccurate time, e.g. if the vCPU is preempted between multiple TSC reads.
- "Virtualize" HWCR.TscFreqSel to make Linux guests happy, which complain
about a "Firmware Bug" if the bit isn't set for select F/M/S combos.
- Don't apply side effects to Hyper-V's synthetic timer on writes from
userspace to fix an issue where the auto-enable behavior can trigger
spurious interrupts, i.e. do auto-enabling only for guest writes.
- Remove an unnecessary kick of all vCPUs when synchronizing the dirty log
without PML enabled.
- Advertise "support" for non-serializing FS/GS base MSR writes as appropriate.
- Use octal notation for file permissions through KVM x86.
- Fix a handful of typo fixes and warts.
virtualization support is disabled in the BIOS on AMD and Hygon
platforms
- A minor cleanup
-----BEGIN PGP SIGNATURE-----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=i9On
-----END PGP SIGNATURE-----
Merge tag 'x86_cpu_for_6.7_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpuid updates from Borislav Petkov:
- Make sure the "svm" feature flag is cleared from /proc/cpuinfo when
virtualization support is disabled in the BIOS on AMD and Hygon
platforms
- A minor cleanup
* tag 'x86_cpu_for_6.7_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu/amd: Remove redundant 'break' statement
x86/cpu: Clear SVM feature if disabled by BIOS
Convert all module params to octal permissions to improve code readability
and to make checkpatch happy:
WARNING: Symbolic permissions 'S_IRUGO' are not preferred. Consider using
octal permissions '0444'.
Signed-off-by: Peng Hao <flyingpeng@tencent.com>
Link: https://lore.kernel.org/r/20231013113020.77523-1-flyingpeng@tencent.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
- Truncate writes to PMU counters to the counter's width to avoid spurious
overflows when emulating counter events in software.
- Set the LVTPC entry mask bit when handling a PMI (to match Intel-defined
architectural behavior).
- Treat KVM_REQ_PMI as a wake event instead of queueing host IRQ work to
kick the guest out of emulated halt.
-----BEGIN PGP SIGNATURE-----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=g8g3
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-pmu-6.6-fixes' of https://github.com/kvm-x86/linux into HEAD
KVM x86/pmu fixes for 6.6:
- Truncate writes to PMU counters to the counter's width to avoid spurious
overflows when emulating counter events in software.
- Set the LVTPC entry mask bit when handling a PMI (to match Intel-defined
architectural behavior).
- Treat KVM_REQ_PMI as a wake event instead of queueing host IRQ work to
kick the guest out of emulated halt.
Commit 916e3e5f26 ("KVM: SVM: Do not use user return MSR support for
virtualized TSC_AUX") introduced a local variable used for the rdmsr()
function for the high 32-bits of the MSR value. This variable is not used
after being set and triggers a warning or error, when treating warnings
as errors, when the unused-but-set-variable flag is set. Mark this
variable as __maybe_unused to fix this.
Fixes: 916e3e5f26 ("KVM: SVM: Do not use user return MSR support for virtualized TSC_AUX")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <0da9874b6e9fcbaaa5edeb345d7e2a7c859fc818.1696271334.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
svm_leave_nested() similar to a nested VM exit, get the vCPU out of nested
mode and thus should end the local inhibition of AVIC on this vCPU.
Failure to do so, can lead to hangs on guest reboot.
Raise the KVM_REQ_APICV_UPDATE request to refresh the AVIC state of the
current vCPU in this case.
Fixes: f44509f849 ("KVM: x86: SVM: allow AVIC to co-exist with a nested guest running")
Cc: stable@vger.kernel.org
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230928173354.217464-4-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In later revisions of AMD's APM, there is a new 'incomplete IPI' exit code:
"Invalid IPI Vector - The vector for the specified IPI was set to an
illegal value (VEC < 16)"
Note that tests on Zen2 machine show that this VM exit doesn't happen and
instead AVIC just does nothing.
Add support for this exit code by doing nothing, instead of filling
the kernel log with errors.
Also replace an unthrottled 'pr_err()' if another unknown incomplete
IPI exit happens with vcpu_unimpl()
(e.g in case AMD adds yet another 'Invalid IPI' exit reason)
Cc: <stable@vger.kernel.org>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230928173354.217464-3-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The following problem exists since x2avic was enabled in the KVM:
svm_set_x2apic_msr_interception is called to enable the interception of
the x2apic msrs.
In particular it is called at the moment the guest resets its apic.
Assuming that the guest's apic was in x2apic mode, the reset will bring
it back to the xapic mode.
The svm_set_x2apic_msr_interception however has an erroneous check for
'!apic_x2apic_mode()' which prevents it from doing anything in this case.
As a result of this, all x2apic msrs are left unintercepted, and that
exposes the bare metal x2apic (if enabled) to the guest.
Oops.
Remove the erroneous '!apic_x2apic_mode()' check to fix that.
This fixes CVE-2023-5090
Fixes: 4d1d7942e3 ("KVM: SVM: Introduce logic to (de)activate x2AVIC mode")
Cc: stable@vger.kernel.org
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Tested-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230928173354.217464-2-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Treat EMULTYPE_SKIP failures on SEV guests as unhandleable emulation
instead of simply resuming the guest, and drop the hack-a-fix which
effects that behavior for the INT3/INTO injection path. If KVM can't
skip an instruction for which KVM has already done partial emulation,
resuming the guest is undesirable as doing so may corrupt guest state.
Link: https://lore.kernel.org/r/20230825013621.2845700-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Refactor and rename can_emulate_instruction() to allow vendor code to
return more than true/false, e.g. to explicitly differentiate between
"retry", "fault", and "unhandleable". For now, just do the plumbing, a
future patch will expand SVM's implementation to signal outright failure
if KVM attempts EMULTYPE_SKIP on an SEV guest.
No functional change intended (or rather, none that are visible to the
guest or userspace).
Link: https://lore.kernel.org/r/20230825013621.2845700-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Currently if an SEV-ES VM shuts down userspace sees KVM_RUN struct with
only errno=EINVAL. This is a very limited amount of information to debug
the situation. Instead return KVM_EXIT_SHUTDOWN to alert userspace the VM
is shutting down and is not usable any further.
Signed-off-by: Peter Gonda <pgonda@google.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Suggested-by: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: x86@kernel.org
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20230907162449.1739785-1-pgonda@google.com
[sean: tweak changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Performance counters are defined to have width less than 64 bits. The
vPMU code maintains the counters in u64 variables but assumes the value
to fit within the defined width. However, for Intel non-full-width
counters (MSR_IA32_PERFCTRx) the value receieved from the guest is
truncated to 32 bits and then sign-extended to full 64 bits. If a
negative value is set, it's sign-extended to 64 bits, but then in
kvm_pmu_incr_counter() it's incremented, truncated, and compared to the
previous value for overflow detection.
That previous value is not truncated, so it always evaluates bigger than
the truncated new one, and a PMI is injected. If the PMI handler writes
a negative counter value itself, the vCPU never quits the PMI loop.
Turns out that Linux PMI handler actually does write the counter with
the value just read with RDPMC, so when no full-width support is exposed
via MSR_IA32_PERF_CAPABILITIES, and the guest initializes the counter to
a negative value, it locks up.
This has been observed in the field, for example, when the guest configures
atop to use perfevents and runs two instances of it simultaneously.
To address the problem, maintain the invariant that the counter value
always fits in the defined bit width, by truncating the received value
in the respective set_msr methods. For better readability, factor the
out into a helper function, pmc_write_counter(), shared by vmx and svm
parts.
Fixes: 9cd803d496 ("KVM: x86: Update vPMCs when retiring instructions")
Cc: stable@vger.kernel.org
Signed-off-by: Roman Kagan <rkagan@amazon.de>
Link: https://lore.kernel.org/all/20230504120042.785651-1-rkagan@amazon.de
Tested-by: Like Xu <likexu@tencent.com>
[sean: tweak changelog, s/set/write in the helper]
Signed-off-by: Sean Christopherson <seanjc@google.com>
When the TSC_AUX MSR is virtualized, the TSC_AUX value is swap type "B"
within the VMSA. This means that the guest value is loaded on VMRUN and
the host value is restored from the host save area on #VMEXIT.
Since the value is restored on #VMEXIT, the KVM user return MSR support
for TSC_AUX can be replaced by populating the host save area with the
current host value of TSC_AUX. And, since TSC_AUX is not changed by Linux
post-boot, the host save area can be set once in svm_hardware_enable().
This eliminates the two WRMSR instructions associated with the user return
MSR support.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <d381de38eb0ab6c9c93dda8503b72b72546053d7.1694811272.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The checks for virtualizing TSC_AUX occur during the vCPU reset processing
path. However, at the time of initial vCPU reset processing, when the vCPU
is first created, not all of the guest CPUID information has been set. In
this case the RDTSCP and RDPID feature support for the guest is not in
place and so TSC_AUX virtualization is not established.
This continues for each vCPU created for the guest. On the first boot of
an AP, vCPU reset processing is executed as a result of an APIC INIT
event, this time with all of the guest CPUID information set, resulting
in TSC_AUX virtualization being enabled, but only for the APs. The BSP
always sees a TSC_AUX value of 0 which probably went unnoticed because,
at least for Linux, the BSP TSC_AUX value is 0.
Move the TSC_AUX virtualization enablement out of the init_vmcb() path and
into the vcpu_after_set_cpuid() path to allow for proper initialization of
the support after the guest CPUID information has been set.
With the TSC_AUX virtualization support now in the vcpu_set_after_cpuid()
path, the intercepts must be either cleared or set based on the guest
CPUID input.
Fixes: 296d5a17e7 ("KVM: SEV-ES: Use V_TSC_AUX if available instead of RDTSC/MSR_TSC_AUX intercepts")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <4137fbcb9008951ab5f0befa74a0399d2cce809a.1694811272.git.thomas.lendacky@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
svm_recalc_instruction_intercepts() is always called at least once
before the vCPU is started, so the setting or clearing of the RDTSCP
intercept can be dropped from the TSC_AUX virtualization support.
Extracted from a patch by Tom Lendacky.
Cc: stable@vger.kernel.org
Fixes: 296d5a17e7 ("KVM: SEV-ES: Use V_TSC_AUX if available instead of RDTSC/MSR_TSC_AUX intercepts")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When SVM is disabled by BIOS, one cannot use KVM but the
SVM feature is still shown in the output of /proc/cpuinfo.
On Intel machines, VMX is cleared by init_ia32_feat_ctl(),
so do the same on AMD and Hygon processors.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230921114940.957141-1-pbonzini@redhat.com
- Misc cleanups
- Retry APIC optimized recalculation if a vCPU is added/enabled
- Overhaul emergency reboot code to bring SVM up to par with VMX, tie the
"emergency disabling" behavior to KVM actually being loaded, and move all of
the logic within KVM
- Fix user triggerable WARNs in SVM where KVM incorrectly assumes the TSC
ratio MSR can diverge from the default iff TSC scaling is enabled, and clean
up related code
- Add a framework to allow "caching" feature flags so that KVM can check if
the guest can use a feature without needing to search guest CPUID
-----BEGIN PGP SIGNATURE-----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=yGM1
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-misc-6.6' of https://github.com/kvm-x86/linux into HEAD
KVM x86 changes for 6.6:
- Misc cleanups
- Retry APIC optimized recalculation if a vCPU is added/enabled
- Overhaul emergency reboot code to bring SVM up to par with VMX, tie the
"emergency disabling" behavior to KVM actually being loaded, and move all of
the logic within KVM
- Fix user triggerable WARNs in SVM where KVM incorrectly assumes the TSC
ratio MSR can diverge from the default iff TSC scaling is enabled, and clean
up related code
- Add a framework to allow "caching" feature flags so that KVM can check if
the guest can use a feature without needing to search guest CPUID
- Add support for SEV-ES DebugSwap, i.e. allow SEV-ES guests to use debug
registers and generate/handle #DBs
- Clean up LBR virtualization code
- Fix a bug where KVM fails to set the target pCPU during an IRTE update
- Fix fatal bugs in SEV-ES intrahost migration
- Fix a bug where the recent (architecturally correct) change to reinject
#BP and skip INT3 broke SEV guests (can't decode INT3 to skip it)
-----BEGIN PGP SIGNATURE-----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=WC5V
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-svm-6.6' of https://github.com/kvm-x86/linux into HEAD
KVM: x86: SVM changes for 6.6:
- Add support for SEV-ES DebugSwap, i.e. allow SEV-ES guests to use debug
registers and generate/handle #DBs
- Clean up LBR virtualization code
- Fix a bug where KVM fails to set the target pCPU during an IRTE update
- Fix fatal bugs in SEV-ES intrahost migration
- Fix a bug where the recent (architecturally correct) change to reinject
#BP and skip INT3 broke SEV guests (can't decode INT3 to skip it)
Disallow SEV (and beyond) if nrips is disabled via module param, as KVM
can't read guest memory to partially emulate and skip an instruction. All
CPUs that support SEV support NRIPS, i.e. this is purely stopping the user
from shooting themselves in the foot.
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20230825013621.2845700-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Don't inject a #UD if KVM attempts to "emulate" to skip an instruction
for an SEV guest, and instead resume the guest and hope that it can make
forward progress. When commit 04c40f344d ("KVM: SVM: Inject #UD on
attempted emulation for SEV guest w/o insn buffer") added the completely
arbitrary #UD behavior, there were no known scenarios where a well-behaved
guest would induce a VM-Exit that triggered emulation, i.e. it was thought
that injecting #UD would be helpful.
However, now that KVM (correctly) attempts to re-inject INT3/INTO, e.g. if
a #NPF is encountered when attempting to deliver the INT3/INTO, an SEV
guest can trigger emulation without a buffer, through no fault of its own.
Resuming the guest and retrying the INT3/INTO is architecturally wrong,
e.g. the vCPU will incorrectly re-hit code #DBs, but for SEV guests there
is literally no other option that has a chance of making forward progress.
Drop the #UD injection for all "skip" emulation, not just those related to
INT3/INTO, even though that means that the guest will likely end up in an
infinite loop instead of getting a #UD (the vCPU may also crash, e.g. if
KVM emulated everything about an instruction except for advancing RIP).
There's no evidence that suggests that an unexpected #UD is actually
better than hanging the vCPU, e.g. a soft-hung vCPU can still respond to
IRQs and NMIs to generate a backtrace.
Reported-by: Wu Zongyo <wuzongyo@mail.ustc.edu.cn>
Closes: https://lore.kernel.org/all/8eb933fd-2cf3-d7a9-32fe-2a1d82eac42a@mail.ustc.edu.cn
Fixes: 6ef88d6e36 ("KVM: SVM: Re-inject INT3/INTO instead of retrying the instruction")
Cc: stable@vger.kernel.org
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20230825013621.2845700-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Skip initializing the VMSA physical address in the VMCB if the VMSA is
NULL, which occurs during intrahost migration as KVM initializes the VMCB
before copying over state from the source to the destination (including
the VMSA and its physical address).
In normal builds, __pa() is just math, so the bug isn't fatal, but with
CONFIG_DEBUG_VIRTUAL=y, the validity of the virtual address is verified
and passing in NULL will make the kernel unhappy.
Fixes: 6defa24d3b ("KVM: SEV: Init target VMCBs in sev_migrate_from")
Cc: stable@vger.kernel.org
Cc: Peter Gonda <pgonda@google.com>
Reviewed-by: Peter Gonda <pgonda@google.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Link: https://lore.kernel.org/r/20230825022357.2852133-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Track "virtual NMI exposed to L1" via a governed feature flag instead of
using a dedicated bit/flag in vcpu_svm.
Note, checking KVM's capabilities instead of the "vnmi" param means that
the code isn't strictly equivalent, as vnmi_enabled could have been set
if nested=false where as that the governed feature cannot. But that's a
glorified nop as the feature/flag is consumed only by paths that are
gated by nSVM being enabled.
Link: https://lore.kernel.org/r/20230815203653.519297-15-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Track "virtual GIF exposed to L1" via a governed feature flag instead of
using a dedicated bit/flag in vcpu_svm.
Note, checking KVM's capabilities instead of the "vgif" param means that
the code isn't strictly equivalent, as vgif_enabled could have been set
if nested=false where as that the governed feature cannot. But that's a
glorified nop as the feature/flag is consumed only by paths that are
Link: https://lore.kernel.org/r/20230815203653.519297-14-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Track "Pause Filtering is exposed to L1" via governed feature flags
instead of using dedicated bits/flags in vcpu_svm.
No functional change intended.
Reviewed-by: Yuan Yao <yuan.yao@intel.com>
Link: https://lore.kernel.org/r/20230815203653.519297-13-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Track "LBR virtualization exposed to L1" via a governed feature flag
instead of using a dedicated bit/flag in vcpu_svm.
Note, checking KVM's capabilities instead of the "lbrv" param means that
the code isn't strictly equivalent, as lbrv_enabled could have been set
if nested=false where as that the governed feature cannot. But that's a
glorified nop as the feature/flag is consumed only by paths that are
gated by nSVM being enabled.
Link: https://lore.kernel.org/r/20230815203653.519297-12-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Track "virtual VMSAVE/VMLOAD exposed to L1" via a governed feature flag
instead of using a dedicated bit/flag in vcpu_svm.
Opportunistically add a comment explaining why KVM disallows virtual
VMLOAD/VMSAVE when the vCPU model is Intel.
No functional change intended.
Link: https://lore.kernel.org/r/20230815203653.519297-11-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Track "TSC scaling exposed to L1" via a governed feature flag instead of
using a dedicated bit/flag in vcpu_svm.
Note, this fixes a benign bug where KVM would mark TSC scaling as exposed
to L1 even if overall nested SVM supported is disabled, i.e. KVM would let
L1 write MSR_AMD64_TSC_RATIO even when KVM didn't advertise TSCRATEMSR
support to userspace.
Reviewed-by: Yuan Yao <yuan.yao@intel.com>
Link: https://lore.kernel.org/r/20230815203653.519297-10-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Track "NRIPS exposed to L1" via a governed feature flag instead of using
a dedicated bit/flag in vcpu_svm.
No functional change intended.
Reviewed-by: Yuan Yao <yuan.yao@intel.com>
Link: https://lore.kernel.org/r/20230815203653.519297-9-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use the governed feature framework to track if XSAVES is "enabled", i.e.
if XSAVES can be used by the guest. Add a comment in the SVM code to
explain the very unintuitive logic of deliberately NOT checking if XSAVES
is enumerated in the guest CPUID model.
No functional change intended.
Reviewed-by: Yuan Yao <yuan.yao@intel.com>
Link: https://lore.kernel.org/r/20230815203653.519297-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Update the target pCPU for IOMMU doorbells when updating IRTE routing if
KVM is actively running the associated vCPU. KVM currently only updates
the pCPU when loading the vCPU (via avic_vcpu_load()), and so doorbell
events will be delayed until the vCPU goes through a put+load cycle (which
might very well "never" happen for the lifetime of the VM).
To avoid inserting a stale pCPU, e.g. due to racing between updating IRTE
routing and vCPU load/put, get the pCPU information from the vCPU's
Physical APIC ID table entry (a.k.a. avic_physical_id_cache in KVM) and
update the IRTE while holding ir_list_lock. Add comments with --verbose
enabled to explain exactly what is and isn't protected by ir_list_lock.
Fixes: 411b44ba80 ("svm: Implements update_pi_irte hook to setup posted interrupt")
Reported-by: dengqiao.joey <dengqiao.joey@bytedance.com>
Cc: stable@vger.kernel.org
Cc: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Tested-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Link: https://lore.kernel.org/r/20230808233132.2499764-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Hoist the acquisition of ir_list_lock from avic_update_iommu_vcpu_affinity()
to its two callers, avic_vcpu_load() and avic_vcpu_put(), specifically to
encapsulate the write to the vCPU's entry in the AVIC Physical ID table.
This will allow a future fix to pull information from the Physical ID entry
when updating the IRTE, without potentially consuming stale information,
i.e. without racing with the vCPU being (un)loaded.
Add a comment to call out that ir_list_lock does NOT protect against
multiple writers, specifically that reading the Physical ID entry in
avic_vcpu_put() outside of the lock is safe.
To preserve some semblance of independence from ir_list_lock, keep the
READ_ONCE() in avic_vcpu_load() even though acuiring the spinlock
effectively ensures the load(s) will be generated after acquiring the
lock.
Cc: stable@vger.kernel.org
Tested-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Link: https://lore.kernel.org/r/20230808233132.2499764-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Similar to how it doesn't make sense to have UNTRAIN_RET have two
untrain calls, it also doesn't make sense for VMEXIT to have an extra
IBPB call.
This cures VMEXIT doing potentially unret+IBPB or double IBPB.
Also, the (SEV) VMEXIT case seems to have been overlooked.
Redefine the meaning of the synthetic IBPB flags to:
- ENTRY_IBPB -- issue IBPB on entry (was: entry + VMEXIT)
- IBPB_ON_VMEXIT -- issue IBPB on VMEXIT
And have 'retbleed=ibpb' set *BOTH* feature flags to ensure it retains
the previous behaviour and issues IBPB on entry+VMEXIT.
The new 'srso=ibpb_vmexit' option only sets IBPB_ON_VMEXIT.
Create UNTRAIN_RET_VM specifically for the VMEXIT case, and have that
check IBPB_ON_VMEXIT.
All this avoids having the VMEXIT case having to check both ENTRY_IBPB
and IBPB_ON_VMEXIT and simplifies the alternatives.
Fixes: fb3bd914b3 ("x86/srso: Add a Speculative RAS Overflow mitigation")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230814121149.109557833@infradead.org
Initially, it was thought that doing an innocuous division in the #DE
handler would take care to prevent any leaking of old data from the
divider but by the time the fault is raised, the speculation has already
advanced too far and such data could already have been used by younger
operations.
Therefore, do the innocuous division on every exit to userspace so that
userspace doesn't see any potentially old data from integer divisions in
kernel space.
Do the same before VMRUN too, to protect host data from leaking into the
guest too.
Fixes: 77245f1c3c ("x86/CPU/AMD: Do not leak quotient data after a division by 0")
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/20230811213824.10025-1-bp@alien8.de
vulnerability on AMD processors. In short, this is yet another issue
where userspace poisons a microarchitectural structure which can then be
used to leak privileged information through a side channel.
-----BEGIN PGP SIGNATURE-----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=73JY
-----END PGP SIGNATURE-----
Merge tag 'x86_bugs_srso' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86/srso fixes from Borislav Petkov:
"Add a mitigation for the speculative RAS (Return Address Stack)
overflow vulnerability on AMD processors.
In short, this is yet another issue where userspace poisons a
microarchitectural structure which can then be used to leak privileged
information through a side channel"
* tag 'x86_bugs_srso' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/srso: Tie SBPB bit setting to microcode patch detection
x86/srso: Add a forgotten NOENDBR annotation
x86/srso: Fix return thunks in generated code
x86/srso: Add IBPB on VMEXIT
x86/srso: Add IBPB
x86/srso: Add SRSO_NO support
x86/srso: Add IBPB_BRTYPE support
x86/srso: Add a Speculative RAS Overflow mitigation
x86/bugs: Increase the x86 bugs vector size to two u32s
To avoid possible time-of-check/time-of-use issues, the GHCB should
almost never be accessed outside dump_ghcb, sev_es_sync_to_ghcb
and sev_es_sync_from_ghcb. The only legitimate uses are to set the
exitinfo fields and to find the address of the scratch area embedded
in the ghcb. Accessing ghcb_usage also goes through svm->sev_es.ghcb
in sev_es_validate_vmgexit(), but that is because anyway the value is
not used.
Removing a shortcut variable that contains the value of svm->sev_es.ghcb
makes these cases a bit more verbose, but it limits the chance of someone
reading the ghcb by mistake.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A KVM guest using SEV-ES or SEV-SNP with multiple vCPUs can trigger
a double fetch race condition vulnerability and invoke the VMGEXIT
handler recursively.
sev_handle_vmgexit() maps the GHCB page using kvm_vcpu_map() and then
fetches the exit code using ghcb_get_sw_exit_code(). Soon after,
sev_es_validate_vmgexit() fetches the exit code again. Since the GHCB
page is shared with the guest, the guest is able to quickly swap the
values with another vCPU and hence bypass the validation. One vmexit code
that can be rejected by sev_es_validate_vmgexit() is SVM_EXIT_VMGEXIT;
if sev_handle_vmgexit() observes it in the second fetch, the call
to svm_invoke_exit_handler() will invoke sev_handle_vmgexit() again
recursively.
To avoid the race, always fetch the GHCB data from the places where
sev_es_sync_from_ghcb stores it.
Exploiting recursions on linux kernel has been proven feasible
in the past, but the impact is mitigated by stack guard pages
(CONFIG_VMAP_STACK). Still, if an attacker manages to call the handler
multiple times, they can theoretically trigger a stack overflow and
cause a denial-of-service, or potentially guest-to-host escape in kernel
configurations without stack guard pages.
Note that winning the race reliably in every iteration is very tricky
due to the very tight window of the fetches; depending on the compiler
settings, they are often consecutive because of optimization and inlining.
Tested by booting an SEV-ES RHEL9 guest.
Fixes: CVE-2023-4155
Fixes: 291bd20d5d ("KVM: SVM: Add initial support for a VMGEXIT VMEXIT")
Cc: stable@vger.kernel.org
Reported-by: Andy Nguyen <theflow@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Validation of the GHCB is susceptible to time-of-check/time-of-use vulnerabilities.
To avoid them, we would like to always snapshot the fields that are read in
sev_es_validate_vmgexit(), and not use the GHCB anymore after it returns.
This means:
- invoking sev_es_sync_from_ghcb() before any GHCB access, including before
sev_es_validate_vmgexit()
- snapshotting all fields including the valid bitmap and the sw_scratch field,
which are currently not caching anywhere.
The valid bitmap is the first thing to be copied out of the GHCB; then,
further accesses will use the copy in svm->sev_es.
Fixes: 291bd20d5d ("KVM: SVM: Add initial support for a VMGEXIT VMEXIT")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Skip writes to MSR_AMD64_TSC_RATIO that are done in the context of a vCPU
if guest state isn't loaded, i.e. if KVM will update MSR_AMD64_TSC_RATIO
during svm_prepare_switch_to_guest() before entering the guest. Checking
guest_state_loaded may or may not be a net positive for performance as
the current_tsc_ratio cache will optimize away duplicate WRMSRs in the
vast majority of scenarios. However, the cost of the check is negligible,
and the real motivation is to document that KVM needs to load the vCPU's
value only when running the vCPU.
Link: https://lore.kernel.org/r/20230729011608.1065019-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Drop the @offset and @multiplier params from the kvm_x86_ops hooks for
propagating TSC offsets/multipliers into hardware, and instead have the
vendor implementations pull the information directly from the vCPU
structure. The respective vCPU fields _must_ be written at the same
time in order to maintain consistent state, i.e. it's not random luck
that the value passed in by all callers is grabbed from the vCPU.
Explicitly grabbing the value from the vCPU field in SVM's implementation
in particular will allow for additional cleanup without introducing even
more subtle dependencies. Specifically, SVM can skip the WRMSR if guest
state isn't loaded, i.e. svm_prepare_switch_to_guest() will load the
correct value for the vCPU prior to entering the guest.
This also reconciles KVM's handling of related values that are stored in
the vCPU, as svm_write_tsc_offset() already assumes/requires the caller
to have updated l1_tsc_offset.
Link: https://lore.kernel.org/r/20230729011608.1065019-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Explicitly disable preemption when writing MSR_AMD64_TSC_RATIO only in the
"outer" helper, as all direct callers of the "inner" helper now run with
preemption already disabled. And that isn't a coincidence, as the outer
helper requires a vCPU and is intended to be used when modifying guest
state and/or emulating guest instructions, which are typically done with
preemption enabled.
Direct use of the inner helper should be extremely limited, as the only
time KVM should modify MSR_AMD64_TSC_RATIO without a vCPU is when
sanitizing the MSR for a specific pCPU (currently done when {en,dis}abling
disabling SVM). The other direct caller is svm_prepare_switch_to_guest(),
which does have a vCPU, but is a one-off special case: KVM is about to
enter the guest on a specific pCPU and thus must have preemption disabled.
Link: https://lore.kernel.org/r/20230729011608.1065019-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
When emulating nested SVM transitions, use the outer helper for writing
the TSC multiplier for L2. Using the inner helper only for one-off cases,
i.e. for paths where KVM is NOT emulating or modifying vCPU state, will
allow for multiple cleanups:
- Explicitly disabling preemption only in the outer helper
- Getting the multiplier from the vCPU field in the outer helper
- Skipping the WRMSR in the outer helper if guest state isn't loaded
Opportunistically delete an extra newline.
No functional change intended.
Link: https://lore.kernel.org/r/20230729011608.1065019-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
When emulating nested VM-Exit, load L1's TSC multiplier if L1's desired
ratio doesn't match the current ratio, not if the ratio L1 is using for
L2 diverges from the default. Functionally, the end result is the same
as KVM will run L2 with L1's multiplier if L2's multiplier is the default,
i.e. checking that L1's multiplier is loaded is equivalent to checking if
L2 has a non-default multiplier.
However, the assertion that TSC scaling is exposed to L1 is flawed, as
userspace can trigger the WARN at will by writing the MSR and then
updating guest CPUID to hide the feature (modifying guest CPUID is
allowed anytime before KVM_RUN). E.g. hacking KVM's state_test
selftest to do
vcpu_set_msr(vcpu, MSR_AMD64_TSC_RATIO, 0);
vcpu_clear_cpuid_feature(vcpu, X86_FEATURE_TSCRATEMSR);
after restoring state in a new VM+vCPU yields an endless supply of:
------------[ cut here ]------------
WARNING: CPU: 10 PID: 206939 at arch/x86/kvm/svm/nested.c:1105
nested_svm_vmexit+0x6af/0x720 [kvm_amd]
Call Trace:
nested_svm_exit_handled+0x102/0x1f0 [kvm_amd]
svm_handle_exit+0xb9/0x180 [kvm_amd]
kvm_arch_vcpu_ioctl_run+0x1eab/0x2570 [kvm]
kvm_vcpu_ioctl+0x4c9/0x5b0 [kvm]
? trace_hardirqs_off+0x4d/0xa0
__se_sys_ioctl+0x7a/0xc0
__x64_sys_ioctl+0x21/0x30
do_syscall_64+0x41/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Unlike the nested VMRUN path, hoisting the svm->tsc_scaling_enabled check
into the if-statement is wrong as KVM needs to ensure L1's multiplier is
loaded in the above scenario. Alternatively, the WARN_ON() could simply
be deleted, but that would make KVM's behavior even more subtle, e.g. it's
not immediately obvious why it's safe to write MSR_AMD64_TSC_RATIO when
checking only tsc_ratio_msr.
Fixes: 5228eb96a4 ("KVM: x86: nSVM: implement nested TSC scaling")
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230729011608.1065019-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Check for nested TSC scaling support on nested SVM VMRUN instead of
asserting that TSC scaling is exposed to L1 if L1's MSR_AMD64_TSC_RATIO
has diverged from KVM's default. Userspace can trigger the WARN at will
by writing the MSR and then updating guest CPUID to hide the feature
(modifying guest CPUID is allowed anytime before KVM_RUN). E.g. hacking
KVM's state_test selftest to do
vcpu_set_msr(vcpu, MSR_AMD64_TSC_RATIO, 0);
vcpu_clear_cpuid_feature(vcpu, X86_FEATURE_TSCRATEMSR);
after restoring state in a new VM+vCPU yields an endless supply of:
------------[ cut here ]------------
WARNING: CPU: 164 PID: 62565 at arch/x86/kvm/svm/nested.c:699
nested_vmcb02_prepare_control+0x3d6/0x3f0 [kvm_amd]
Call Trace:
<TASK>
enter_svm_guest_mode+0x114/0x560 [kvm_amd]
nested_svm_vmrun+0x260/0x330 [kvm_amd]
vmrun_interception+0x29/0x30 [kvm_amd]
svm_invoke_exit_handler+0x35/0x100 [kvm_amd]
svm_handle_exit+0xe7/0x180 [kvm_amd]
kvm_arch_vcpu_ioctl_run+0x1eab/0x2570 [kvm]
kvm_vcpu_ioctl+0x4c9/0x5b0 [kvm]
__se_sys_ioctl+0x7a/0xc0
__x64_sys_ioctl+0x21/0x30
do_syscall_64+0x41/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x45ca1b
Note, the nested #VMEXIT path has the same flaw, but needs a different
fix and will be handled separately.
Fixes: 5228eb96a4 ("KVM: x86: nSVM: implement nested TSC scaling")
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230729011608.1065019-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Now that kvm_rebooting is guaranteed to be true prior to disabling SVM
in an emergency, use the existing stgi() helper instead of open coding
STGI. In effect, eat faults on STGI if and only if kvm_rebooting==true.
Link: https://lore.kernel.org/r/20230721201859.2307736-19-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Set kvm_rebooting when virtualization is disabled in an emergency so that
KVM eats faults on virtualization instructions even if kvm_reboot() isn't
reached.
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20230721201859.2307736-18-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Move cpu_svm_disable() into KVM proper now that all hardware
virtualization management is routed through KVM. Remove the now-empty
virtext.h.
No functional change intended.
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20230721201859.2307736-17-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Check "this" CPU instead of the boot CPU when querying SVM support so that
the per-CPU checks done during hardware enabling actually function as
intended, i.e. will detect issues where SVM isn't support on all CPUs.
Disable migration for the use from svm_init() mostly so that the standard
accessors for the per-CPU data can be used without getting yelled at by
CONFIG_DEBUG_PREEMPT=y sanity checks. Preventing the "disabled by BIOS"
error message from reporting the wrong CPU is largely a bonus, as ensuring
a stable CPU during module load is a non-goal for KVM.
Link: https://lore.kernel.org/all/ZAdxNgv0M6P63odE@google.com
Cc: Kai Huang <kai.huang@intel.com>
Cc: Chao Gao <chao.gao@intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20230721201859.2307736-15-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Fold the guts of cpu_has_svm() into kvm_is_svm_supported(), its sole
remaining user.
No functional change intended.
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20230721201859.2307736-14-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use the virt callback to disable SVM (and set GIF=1) during an emergency
instead of blindly attempting to disable SVM. Like the VMX case, if a
hypervisor, i.e. KVM, isn't loaded/active, SVM can't be in use.
Acked-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20230721201859.2307736-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use the recently introduced svm_get_lbr_vmcb() instead an open coded
equivalent to retrieve the target VMCB when emulating writes to
MSR_IA32_DEBUGCTLMSR.
No functional change intended.
Link: https://lore.kernel.org/r/20230607203519.1570167-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Clean up the enable_lbrv computation in svm_update_lbrv() to consolidate
the logic for computing enable_lbrv into a single statement, and to remove
the coding style violations (lack of curly braces on nested if).
No functional change intended.
Link: https://lore.kernel.org/r/20230607203519.1570167-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Refactor KVM's handling of LBR MSRs on SVM to avoid a second layer of
case statements, and thus eliminate a dead KVM_BUG() call, which (a) will
never be hit in the current code base and (b) if a future commit breaks
things, will never fire as KVM passes "false" instead "true" or '1' for
the KVM_BUG() condition.
Reported-by: Michal Luczaj <mhal@rbox.co>
Cc: Yuan Yao <yuan.yao@intel.com>
Link: https://lore.kernel.org/r/20230607203519.1570167-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reject KVM_SET_SREGS{2} with -EINVAL if the incoming CR0 is invalid,
e.g. due to setting bits 63:32, illegal combinations, or to a value that
isn't allowed in VMX (non-)root mode. The VMX checks in particular are
"fun" as failure to disallow Real Mode for an L2 that is configured with
unrestricted guest disabled, when KVM itself has unrestricted guest
enabled, will result in KVM forcing VM86 mode to virtual Real Mode for
L2, but then fail to unwind the related metadata when synthesizing a
nested VM-Exit back to L1 (which has unrestricted guest enabled).
Opportunistically fix a benign typo in the prototype for is_valid_cr4().
Cc: stable@vger.kernel.org
Reported-by: syzbot+5feef0b9ee9c8e9e5689@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/000000000000f316b705fdf6e2b4@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230613203037.1968489-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that handle_fastpath_set_msr_irqoff() acquires kvm->srcu, i.e. allows
dereferencing memslots during WRMSR emulation, drop the requirement that
"next RIP" is valid. In hindsight, acquiring kvm->srcu would have been a
better fix than avoiding the pastpath, but at the time it was thought that
accessing SRCU-protected data in the fastpath was a one-off edge case.
This reverts commit 5c30e8101e.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230721224337.2335137-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Bail early from svm_enable_nmi_window() for SEV-ES guests without trying
to enable single-step of the guest, as single-stepping an SEV-ES guest is
impossible and the guest is responsible for *telling* KVM when it is ready
for an new NMI to be injected.
Functionally, setting TF and RF in svm->vmcb->save.rflags is benign as the
field is ignored by hardware, but it's all kinds of confusing.
Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Link: https://lore.kernel.org/r/20230615063757.3039121-10-aik@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Immediately mark NMIs as unmasked in response to #VMGEXIT(NMI complete)
instead of setting awaiting_iret_completion and waiting until the *next*
VM-Exit to unmask NMIs. The whole point of "NMI complete" is that the
guest is responsible for telling the hypervisor when it's safe to inject
an NMI, i.e. there's no need to wait. And because there's no IRET to
single-step, the next VM-Exit could be a long time coming, i.e. KVM could
incorrectly hold an NMI pending for far longer than what is required and
expected.
Opportunistically fix a stale reference to HF_IRET_MASK.
Fixes: 916b54a768 ("KVM: x86: Move HF_NMI_MASK and HF_IRET_MASK into "struct vcpu_svm"")
Fixes: 4444dfe405 ("KVM: SVM: Add NMI support for an SEV-ES guest")
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20230615063757.3039121-9-aik@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Disable #DB for SEV-ES guests when DebugSwap is enabled. There is no point
in such intercept as KVM does not allow guest debug for SEV-ES guests.
Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Link: https://lore.kernel.org/r/20230615063757.3039121-8-aik@amd.com
[sean: add comment as to why KVM disables #DB intercept iff DebugSwap=1]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add support for "DebugSwap for SEV-ES guests", which provides support
for swapping DR[0-3] and DR[0-3]_ADDR_MASK on VMRUN and VMEXIT, i.e.
allows KVM to expose debug capabilities to SEV-ES guests. Without
DebugSwap support, the CPU doesn't save/load most _guest_ debug
registers (except DR6/7), and KVM cannot manually context switch guest
DRs due the VMSA being encrypted.
Enable DebugSwap if and only if the CPU also supports NoNestedDataBp,
which causes the CPU to ignore nested #DBs, i.e. #DBs that occur when
vectoring a #DB. Without NoNestedDataBp, a malicious guest can DoS
the host by putting the CPU into an infinite loop of vectoring #DBs
(see https://bugzilla.redhat.com/show_bug.cgi?id=1278496)
Set the features bit in sev_es_sync_vmsa() which is the last point
when VMSA is not encrypted yet as sev_(es_)init_vmcb() (where the most
init happens) is called not only when VCPU is initialised but also on
intrahost migration when VMSA is encrypted.
Eliminate DR7 intercepts as KVM can't modify guest DR7, and intercepting
DR7 would completely defeat the purpose of enabling DebugSwap.
Make X86_FEATURE_DEBUG_SWAP appear in /proc/cpuinfo (by not adding "") to
let the operator know if the VM can debug.
Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Link: https://lore.kernel.org/r/20230615063757.3039121-7-aik@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Currently SVM setup is done sequentially in
init_vmcb() -> sev_init_vmcb() -> sev_es_init_vmcb()
and tries keeping SVM/SEV/SEV-ES bits separated. One of the exceptions
is DR intercepts which is for SEV-ES before sev_es_init_vmcb() runs.
Move the SEV-ES intercept setup to sev_es_init_vmcb(). From now on
set_dr_intercepts()/clr_dr_intercepts() handle SVM/SEV only.
No functional change intended.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Reviewed-by: Santosh Shukla <santosh.shukla@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20230615063757.3039121-6-aik@amd.com
[sean: drop comment about intercepting DR7]
Signed-off-by: Sean Christopherson <seanjc@google.com>
SVM/SEV enable debug registers intercepts to skip swapping DRs
on entering/exiting the guest. When the guest is in control of
debug registers (vcpu->guest_debug == 0), there is an optimisation to
reduce the number of context switches: intercepts are cleared and
the KVM_DEBUGREG_WONT_EXIT flag is set to tell KVM to do swapping
on guest enter/exit.
The same code also executes for SEV-ES, however it has no effect as
- it always takes (vcpu->guest_debug == 0) branch;
- KVM_DEBUGREG_WONT_EXIT is set but DR7 intercept is not cleared;
- vcpu_enter_guest() writes DRs but VMRUN for SEV-ES swaps them
with the values from _encrypted_ VMSA.
Be explicit about SEV-ES not supporting debug:
- return right away from dr_interception() and skip unnecessary processing;
- return an error right away from the KVM_SEV_LAUNCH_UPDATE_VMSA handler
if debugging was already enabled.
KVM_SET_GUEST_DEBUG are failing already after KVM_SEV_LAUNCH_UPDATE_VMSA
is finished due to vcpu->arch.guest_state_protected set to true.
Add WARN_ON to kvm_x86::sync_dirty_debug_regs() (saves guest DRs on
guest exit) to signify that SEV-ES won't hit that path.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Link: https://lore.kernel.org/r/20230615063757.3039121-5-aik@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Rewrite the comment(s) in sev_es_prepare_switch_to_guest() to explain the
swap types employed by the CPU for SEV-ES guests, i.e. to explain why KVM
needs to save a seemingly random subset of host state, and to provide a
decoder for the APM's Type-A/B/C terminology.
Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Link: https://lore.kernel.org/r/20230615063757.3039121-4-aik@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Currently SVM setup is done sequentially in
init_vmcb() -> sev_init_vmcb() -> sev_es_init_vmcb() and tries
keeping SVM/SEV/SEV-ES bits separated. One of the exceptions
is #GP intercept which init_vmcb() skips setting for SEV guests and
then sev_es_init_vmcb() needlessly clears it.
Remove the SEV check from init_vmcb(). Clear the #GP intercept in
sev_init_vmcb(). SEV-ES will use the SEV setting.
No functional change intended.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Reviewed-by: Carlos Bilbao <carlos.bilbao@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Santosh Shukla <santosh.shukla@amd.com>
Link: https://lore.kernel.org/r/20230615063757.3039121-3-aik@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Static functions set_dr_intercepts() and clr_dr_intercepts() are only
called from SVM so move them to .c.
No functional change intended.
Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Reviewed-by: Carlos Bilbao <carlos.bilbao@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Santosh Shukla <santosh.shukla@amd.com>
Link: https://lore.kernel.org/r/20230615063757.3039121-2-aik@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add the option to flush IBPB only on VMEXIT in order to protect from
malicious guests but one otherwise trusts the software that runs on the
hypervisor.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
- Drop manual TR/TSS load after VM-Exit now that KVM uses VMLOAD for host state
- Fix a not-yet-problematic missing call to trace_kvm_exit() for VM-Exits that
are handled in the fastpath
- Print more descriptive information about the status of SEV and SEV-ES during
module load
- Assert that misc_cg_set_capacity() doesn't fail to avoid should-be-impossible
memory leaks
-----BEGIN PGP SIGNATURE-----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=rcFn
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-svm-6.5' of https://github.com/kvm-x86/linux into HEAD
KVM SVM changes for 6.5:
- Drop manual TR/TSS load after VM-Exit now that KVM uses VMLOAD for host state
- Fix a not-yet-problematic missing call to trace_kvm_exit() for VM-Exits that
are handled in the fastpath
- Print more descriptive information about the status of SEV and SEV-ES during
module load
- Assert that misc_cg_set_capacity() doesn't fail to avoid should-be-impossible
memory leaks
- Add support for AMD PerfMonV2, with a variety of cleanups and minor fixes
included along the way
-----BEGIN PGP SIGNATURE-----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=MwqV
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-pmu-6.5' of https://github.com/kvm-x86/linux into HEAD
KVM x86/pmu changes for 6.5:
- Add support for AMD PerfMonV2, with a variety of cleanups and minor fixes
included along the way
- Move handling of PAT out of MTRR code and dedup SVM+VMX code
- Fix output of PIC poll command emulation when there's an interrupt
- Fix a longstanding bug in the reporting of the number of entries returned by
KVM_GET_CPUID2
- Add a maintainer's handbook to document KVM x86 processes, preferred coding
style, testing expectations, etc.
- Misc cleanups
-----BEGIN PGP SIGNATURE-----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=D0BH
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-misc-6.5' of https://github.com/kvm-x86/linux into HEAD
KVM x86 changes for 6.5:
* Move handling of PAT out of MTRR code and dedup SVM+VMX code
* Fix output of PIC poll command emulation when there's an interrupt
* Add a maintainer's handbook to document KVM x86 processes, preferred coding
style, testing expectations, etc.
* Misc cleanups
WARN and continue if misc_cg_set_capacity() fails, as the only scenario
in which it can fail is if the specified resource is invalid, which should
never happen when CONFIG_KVM_AMD_SEV=y. Deliberately not bailing "fixes"
a theoretical bug where KVM would leak the ASID bitmaps on failure, which
again can't happen.
If the impossible should happen, the end result is effectively the same
with respect to SEV and SEV-ES (they are unusable), while continuing on
has the advantage of letting KVM load, i.e. userspace can still run
non-SEV guests.
Reported-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Link: https://lore.kernel.org/r/20230607004449.1421131-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
CPUID leaf 0x80000022 i.e. ExtPerfMonAndDbg advertises some new
performance monitoring features for AMD processors.
Bit 0 of EAX indicates support for Performance Monitoring Version 2
(PerfMonV2) features. If found to be set during PMU initialization,
the EBX bits of the same CPUID function can be used to determine
the number of available PMCs for different PMU types.
Expose the relevant bits via KVM_GET_SUPPORTED_CPUID so that
guests can make use of the PerfMonV2 features.
Co-developed-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Like Xu <likexu@tencent.com>
Link: https://lore.kernel.org/r/20230603011058.1038821-13-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
If AMD Performance Monitoring Version 2 (PerfMonV2) is detected by
the guest, it can use a new scheme to manage the Core PMCs using the
new global control and status registers.
In addition to benefiting from the PerfMonV2 functionality in the same
way as the host (higher precision), the guest also can reduce the number
of vm-exits by lowering the total number of MSRs accesses.
In terms of implementation details, amd_is_valid_msr() is resurrected
since three newly added MSRs could not be mapped to one vPMC.
The possibility of emulating PerfMonV2 on the mainframe has also
been eliminated for reasons of precision.
Co-developed-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Like Xu <likexu@tencent.com>
[sean: drop "Based on the observed HW." comments]
Link: https://lore.kernel.org/r/20230603011058.1038821-12-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Cap the number of general purpose counters enumerated on AMD to what KVM
actually supports, i.e. don't allow userspace to coerce KVM into thinking
there are more counters than actually exist, e.g. by enumerating
X86_FEATURE_PERFCTR_CORE in guest CPUID when its not supported.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Like Xu <likexu@tencent.com>
[sean: massage changelog]
Link: https://lore.kernel.org/r/20230603011058.1038821-10-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Enable and advertise PERFCTR_CORE if and only if the minimum number of
required counters are available, i.e. if perf says there are less than six
general purpose counters.
Opportunistically, use kvm_cpu_cap_check_and_set() instead of open coding
the check for host support.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Like Xu <likexu@tencent.com>
[sean: massage shortlog and changelog]
Link: https://lore.kernel.org/r/20230603011058.1038821-9-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Disable PMU support when running on AMD and perf reports fewer than four
general purpose counters. All AMD PMUs must define at least four counters
due to AMD's legacy architecture hardcoding the number of counters
without providing a way to enumerate the number of counters to software,
e.g. from AMD's APM:
The legacy architecture defines four performance counters (PerfCtrn)
and corresponding event-select registers (PerfEvtSeln).
Virtualizing fewer than four counters can lead to guest instability as
software expects four counters to be available. Rather than bleed AMD
details into the common code, just define a const unsigned int and
provide a convenient location to document why Intel and AMD have different
mins (in particular, AMD's lack of any way to enumerate less than four
counters to the guest).
Keep the minimum number of counters at Intel at one, even though old P6
and Core Solo/Duo processor effectively require a minimum of two counters.
KVM can, and more importantly has up until this point, supported a vPMU so
long as the CPU has at least one counter. Perf's support for P6/Core CPUs
does require two counters, but perf will happily chug along with a single
counter when running on a modern CPU.
Cc: Jim Mattson <jmattson@google.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Like Xu <likexu@tencent.com>
[sean: set Intel min to '1', not '2']
Link: https://lore.kernel.org/r/20230603011058.1038821-8-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Move the Intel PMU implementation of pmc_is_enabled() to common x86 code
as pmc_is_globally_enabled(), and drop AMD's implementation. AMD PMU
currently supports only v1, and thus not PERF_GLOBAL_CONTROL, thus the
semantics for AMD are unchanged. And when support for AMD PMU v2 comes
along, the common behavior will also Just Work.
Signed-off-by: Like Xu <likexu@tencent.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20230603011058.1038821-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
As test_bit() returns bool, explicitly converting result to bool is
unnecessary. Get rid of '!!'.
No functional change intended.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://lore.kernel.org/r/20230605200158.118109-1-mhal@rbox.co
Signed-off-by: Sean Christopherson <seanjc@google.com>
Let's print available ASID ranges for SEV/SEV-ES guests.
This information can be useful for system administrator
to debug if SEV/SEV-ES fails to enable.
There are a few reasons.
SEV:
- NPT is disabled (module parameter)
- CPU lacks some features (sev, decodeassists)
- Maximum SEV ASID is 0
SEV-ES:
- mmio_caching is disabled (module parameter)
- CPU lacks sev_es feature
- Minimum SEV ASID value is 1 (can be adjusted in BIOS/UEFI)
Cc: Sean Christopherson <seanjc@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Stéphane Graber <stgraber@ubuntu.com>
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Link: https://lore.kernel.org/r/20230522161249.800829-3-aleksandr.mikhalitsyn@canonical.com
[sean: print '0' for min SEV-ES ASID if there are no available ASIDs]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Move SVM's call to trace_kvm_exit() from the "slow" VM-Exit handler to
svm_vcpu_run() so that KVM traces fastpath VM-Exits that re-enter the
guest without bouncing through the slow path. This bug is benign in the
current code base as KVM doesn't currently support any such exits on SVM.
Fixes: a9ab13ff6e ("KVM: X86: Improve latency for single target IPI fastpath")
Link: https://lore.kernel.org/r/20230602011920.787844-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
While testing Hyper-V enabled Windows Server 2019 guests on Zen4 hardware
I noticed that with vCPU count large enough (> 16) they sometimes froze at
boot.
With vCPU count of 64 they never booted successfully - suggesting some kind
of a race condition.
Since adding "vnmi=0" module parameter made these guests boot successfully
it was clear that the problem is most likely (v)NMI-related.
Running kvm-unit-tests quickly showed failing NMI-related tests cases, like
"multiple nmi" and "pending nmi" from apic-split, x2apic and xapic tests
and the NMI parts of eventinj test.
The issue was that once one NMI was being serviced no other NMI was allowed
to be set pending (NMI limit = 0), which was traced to
svm_is_vnmi_pending() wrongly testing for the "NMI blocked" flag rather
than for the "NMI pending" flag.
Fix this by testing for the right flag in svm_is_vnmi_pending().
Once this is done, the NMI-related kvm-unit-tests pass successfully and
the Windows guest no longer freezes at boot.
Fixes: fa4c027a79 ("KVM: x86: Add support for SVM's Virtual NMI")
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/be4ca192eb0c1e69a210db3009ca984e6a54ae69.1684495380.git.maciej.szmigiero@oracle.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Move the common check-and-set handling of PAT MSR writes out of vendor
code and into kvm_set_msr_common(). This aligns writes with reads, which
are already handled in common code, i.e. makes the handling of reads and
writes symmetrical in common code.
Alternatively, the common handling in kvm_get_msr_common() could be moved
to vendor code, but duplicating code is generally undesirable (even though
the duplicatated code is trivial in this case), and guest writes to PAT
should be rare, i.e. the overhead of the extra function call is a
non-issue in practice.
Suggested-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20230511233351.635053-9-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use kvm_pat_valid() directly instead of bouncing through kvm_mtrr_valid().
The PAT is not an MTRR, and kvm_mtrr_valid() just redirects to
kvm_pat_valid(), i.e. is exempt from KVM's "zap SPTEs" logic that's
needed to honor guest MTRRs when the VM has a passthrough device with
non-coherent DMA (KVM does NOT set "ignore guest PAT" in this case, and so
enables hardware virtualization of the guest's PAT, i.e. doesn't need to
manually emulate the PAT memtype).
Signed-off-by: Ke Guo <guoke@uniontech.com>
[sean: massage changelog]
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20230511233351.635053-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
* More phys_to_virt conversions
* Improvement of AP management for VSIE (nested virtualization)
ARM64:
* Numerous fixes for the pathological lock inversion issue that
plagued KVM/arm64 since... forever.
* New framework allowing SMCCC-compliant hypercalls to be forwarded
to userspace, hopefully paving the way for some more features
being moved to VMMs rather than be implemented in the kernel.
* Large rework of the timer code to allow a VM-wide offset to be
applied to both virtual and physical counters as well as a
per-timer, per-vcpu offset that complements the global one.
This last part allows the NV timer code to be implemented on
top.
* A small set of fixes to make sure that we don't change anything
affecting the EL1&0 translation regime just after having having
taken an exception to EL2 until we have executed a DSB. This
ensures that speculative walks started in EL1&0 have completed.
* The usual selftest fixes and improvements.
KVM x86 changes for 6.4:
* Optimize CR0.WP toggling by avoiding an MMU reload when TDP is enabled,
and by giving the guest control of CR0.WP when EPT is enabled on VMX
(VMX-only because SVM doesn't support per-bit controls)
* Add CR0/CR4 helpers to query single bits, and clean up related code
where KVM was interpreting kvm_read_cr4_bits()'s "unsigned long" return
as a bool
* Move AMD_PSFD to cpufeatures.h and purge KVM's definition
* Avoid unnecessary writes+flushes when the guest is only adding new PTEs
* Overhaul .sync_page() and .invlpg() to utilize .sync_page()'s optimizations
when emulating invalidations
* Clean up the range-based flushing APIs
* Revamp the TDP MMU's reaping of Accessed/Dirty bits to clear a single
A/D bit using a LOCK AND instead of XCHG, and skip all of the "handle
changed SPTE" overhead associated with writing the entire entry
* Track the number of "tail" entries in a pte_list_desc to avoid having
to walk (potentially) all descriptors during insertion and deletion,
which gets quite expensive if the guest is spamming fork()
* Disallow virtualizing legacy LBRs if architectural LBRs are available,
the two are mutually exclusive in hardware
* Disallow writes to immutable feature MSRs (notably PERF_CAPABILITIES)
after KVM_RUN, similar to CPUID features
* Overhaul the vmx_pmu_caps selftest to better validate PERF_CAPABILITIES
* Apply PMU filters to emulated events and add test coverage to the
pmu_event_filter selftest
x86 AMD:
* Add support for virtual NMIs
* Fixes for edge cases related to virtual interrupts
x86 Intel:
* Don't advertise XTILE_CFG in KVM_GET_SUPPORTED_CPUID if XTILE_DATA is
not being reported due to userspace not opting in via prctl()
* Fix a bug in emulation of ENCLS in compatibility mode
* Allow emulation of NOP and PAUSE for L2
* AMX selftests improvements
* Misc cleanups
MIPS:
* Constify MIPS's internal callbacks (a leftover from the hardware enabling
rework that landed in 6.3)
Generic:
* Drop unnecessary casts from "void *" throughout kvm_main.c
* Tweak the layout of "struct kvm_mmu_memory_cache" to shrink the struct
size by 8 bytes on 64-bit kernels by utilizing a padding hole
Documentation:
* Fix goof introduced by the conversion to rST
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmRNExkUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNyjwf+MkzDael9y9AsOZoqhEZ5OsfQYJ32
Im5ZVYsPRU2K5TuoWql6meIihgclCj1iIU32qYHa2F1WYt2rZ72rJp+HoY8b+TaI
WvF0pvNtqQyg3iEKUBKPA4xQ6mj7RpQBw86qqiCHmlfNt0zxluEGEPxH8xrWcfhC
huDQ+NUOdU7fmJ3rqGitCvkUbCuZNkw3aNPR8dhU8RAWrwRzP2hBOmdxIeo81WWY
XMEpJSijbGpXL9CvM0Jz9nOuMJwZwCCBGxg1vSQq0xTfLySNMxzvWZC2GFaBjucb
j0UOQ7yE0drIZDVhd3sdNslubXXU6FcSEzacGQb9aigMUon3Tem9SHi7Kw==
=S2Hq
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"s390:
- More phys_to_virt conversions
- Improvement of AP management for VSIE (nested virtualization)
ARM64:
- Numerous fixes for the pathological lock inversion issue that
plagued KVM/arm64 since... forever.
- New framework allowing SMCCC-compliant hypercalls to be forwarded
to userspace, hopefully paving the way for some more features being
moved to VMMs rather than be implemented in the kernel.
- Large rework of the timer code to allow a VM-wide offset to be
applied to both virtual and physical counters as well as a
per-timer, per-vcpu offset that complements the global one. This
last part allows the NV timer code to be implemented on top.
- A small set of fixes to make sure that we don't change anything
affecting the EL1&0 translation regime just after having having
taken an exception to EL2 until we have executed a DSB. This
ensures that speculative walks started in EL1&0 have completed.
- The usual selftest fixes and improvements.
x86:
- Optimize CR0.WP toggling by avoiding an MMU reload when TDP is
enabled, and by giving the guest control of CR0.WP when EPT is
enabled on VMX (VMX-only because SVM doesn't support per-bit
controls)
- Add CR0/CR4 helpers to query single bits, and clean up related code
where KVM was interpreting kvm_read_cr4_bits()'s "unsigned long"
return as a bool
- Move AMD_PSFD to cpufeatures.h and purge KVM's definition
- Avoid unnecessary writes+flushes when the guest is only adding new
PTEs
- Overhaul .sync_page() and .invlpg() to utilize .sync_page()'s
optimizations when emulating invalidations
- Clean up the range-based flushing APIs
- Revamp the TDP MMU's reaping of Accessed/Dirty bits to clear a
single A/D bit using a LOCK AND instead of XCHG, and skip all of
the "handle changed SPTE" overhead associated with writing the
entire entry
- Track the number of "tail" entries in a pte_list_desc to avoid
having to walk (potentially) all descriptors during insertion and
deletion, which gets quite expensive if the guest is spamming
fork()
- Disallow virtualizing legacy LBRs if architectural LBRs are
available, the two are mutually exclusive in hardware
- Disallow writes to immutable feature MSRs (notably
PERF_CAPABILITIES) after KVM_RUN, similar to CPUID features
- Overhaul the vmx_pmu_caps selftest to better validate
PERF_CAPABILITIES
- Apply PMU filters to emulated events and add test coverage to the
pmu_event_filter selftest
- AMD SVM:
- Add support for virtual NMIs
- Fixes for edge cases related to virtual interrupts
- Intel AMX:
- Don't advertise XTILE_CFG in KVM_GET_SUPPORTED_CPUID if
XTILE_DATA is not being reported due to userspace not opting in
via prctl()
- Fix a bug in emulation of ENCLS in compatibility mode
- Allow emulation of NOP and PAUSE for L2
- AMX selftests improvements
- Misc cleanups
MIPS:
- Constify MIPS's internal callbacks (a leftover from the hardware
enabling rework that landed in 6.3)
Generic:
- Drop unnecessary casts from "void *" throughout kvm_main.c
- Tweak the layout of "struct kvm_mmu_memory_cache" to shrink the
struct size by 8 bytes on 64-bit kernels by utilizing a padding
hole
Documentation:
- Fix goof introduced by the conversion to rST"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (211 commits)
KVM: s390: pci: fix virtual-physical confusion on module unload/load
KVM: s390: vsie: clarifications on setting the APCB
KVM: s390: interrupt: fix virtual-physical confusion for next alert GISA
KVM: arm64: Have kvm_psci_vcpu_on() use WRITE_ONCE() to update mp_state
KVM: arm64: Acquire mp_state_lock in kvm_arch_vcpu_ioctl_vcpu_init()
KVM: selftests: Test the PMU event "Instructions retired"
KVM: selftests: Copy full counter values from guest in PMU event filter test
KVM: selftests: Use error codes to signal errors in PMU event filter test
KVM: selftests: Print detailed info in PMU event filter asserts
KVM: selftests: Add helpers for PMC asserts in PMU event filter test
KVM: selftests: Add a common helper for the PMU event filter guest code
KVM: selftests: Fix spelling mistake "perrmited" -> "permitted"
KVM: arm64: vhe: Drop extra isb() on guest exit
KVM: arm64: vhe: Synchronise with page table walker on MMU update
KVM: arm64: pkvm: Document the side effects of kvm_flush_dcache_to_poc()
KVM: arm64: nvhe: Synchronise with page table walker on TLBI
KVM: arm64: Handle 32bit CNTPCTSS traps
KVM: arm64: nvhe: Synchronise with page table walker on vcpu run
KVM: arm64: vgic: Don't acquire its_lock before config_lock
KVM: selftests: Add test to verify KVM's supported XCR0
...
- Remove diagnostics and adjust config for CSD lock diagnostics
- Add a generic IPI-sending tracepoint, as currently there's no easy
way to instrument IPI origins: it's arch dependent and for some
major architectures it's not even consistently available.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Wp7f
-----END PGP SIGNATURE-----
Merge tag 'smp-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull SMP cross-CPU function-call updates from Ingo Molnar:
- Remove diagnostics and adjust config for CSD lock diagnostics
- Add a generic IPI-sending tracepoint, as currently there's no easy
way to instrument IPI origins: it's arch dependent and for some major
architectures it's not even consistently available.
* tag 'smp-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
trace,smp: Trace all smp_function_call*() invocations
trace: Add trace_ipi_send_cpu()
sched, smp: Trace smp callback causing an IPI
smp: reword smp call IPI comment
treewide: Trace IPIs sent via smp_send_reschedule()
irq_work: Trace self-IPIs sent via arch_irq_work_raise()
smp: Trace IPIs sent via arch_send_call_function_ipi_mask()
sched, smp: Trace IPIs sent via send_call_function_single_ipi()
trace: Add trace_ipi_send_cpumask()
kernel/smp: Make csdlock_debug= resettable
locking/csd_lock: Remove per-CPU data indirection from CSD lock debugging
locking/csd_lock: Remove added data from CSD lock debugging
locking/csd_lock: Add Kconfig option for csd_debug default
- Add support for virtual NMIs
- Fixes for edge cases related to virtual interrupts
-----BEGIN PGP SIGNATURE-----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=9xNX
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-svm-6.4' of https://github.com/kvm-x86/linux into HEAD
KVM SVM changes for 6.4:
- Add support for virtual NMIs
- Fixes for edge cases related to virtual interrupts
- Disallow virtualizing legacy LBRs if architectural LBRs are available,
the two are mutually exclusive in hardware
- Disallow writes to immutable feature MSRs (notably PERF_CAPABILITIES)
after KVM_RUN, and overhaul the vmx_pmu_caps selftest to better
validate PERF_CAPABILITIES
- Apply PMU filters to emulated events and add test coverage to the
pmu_event_filter selftest
- Misc cleanups and fixes
-----BEGIN PGP SIGNATURE-----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=m18F
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-pmu-6.4' of https://github.com/kvm-x86/linux into HEAD
KVM x86 PMU changes for 6.4:
- Disallow virtualizing legacy LBRs if architectural LBRs are available,
the two are mutually exclusive in hardware
- Disallow writes to immutable feature MSRs (notably PERF_CAPABILITIES)
after KVM_RUN, and overhaul the vmx_pmu_caps selftest to better
validate PERF_CAPABILITIES
- Apply PMU filters to emulated events and add test coverage to the
pmu_event_filter selftest
- Misc cleanups and fixes
- Tweak FNAME(sync_spte) to avoid unnecessary writes+flushes when the
guest is only adding new PTEs
- Overhaul .sync_page() and .invlpg() to share the .sync_page()
implementation, i.e. utilize .sync_page()'s optimizations when emulating
invalidations
- Clean up the range-based flushing APIs
- Revamp the TDP MMU's reaping of Accessed/Dirty bits to clear a single
A/D bit using a LOCK AND instead of XCHG, and skip all of the "handle
changed SPTE" overhead associated with writing the entire entry
- Track the number of "tail" entries in a pte_list_desc to avoid having
to walk (potentially) all descriptors during insertion and deletion,
which gets quite expensive if the guest is spamming fork()
- Misc cleanups
-----BEGIN PGP SIGNATURE-----
iQJGBAABCgAwFiEEMHr+pfEFOIzK+KY1YJEiAU0MEvkFAmRGsvASHHNlYW5qY0Bn
b29nbGUuY29tAAoJEGCRIgFNDBL5XnoP/0D8rQmrA0xPHK81zYS1E71tsR/itO/T
CQMSB4PhEqvcRUaWOuhLBRUW+noWzaOkjkMYK2uoPTdtme7v9+Ar7EtfrWYHrBWD
IxHCAymo3a5dQPUc3Nb77u6HjRAOokPSqSz5jE4qAjlniW09feruro2Phi+BTme4
JjxTc/7Oh0Fu26+mK7mJHiw3fV1x3YznnnRPrKGrVQes5L6ozNICkUZ6nvuJUVMk
lTNHNQbG8PqJZnfWG7VIKRn1vdfXwEfnvyucGVEqFfPLkOXqJHyqMVmIOtvsH7C5
l8j36+lBZwtFh2jk2EsXOTb6sS7l1MSvyHLlbaJaqqffP+77Hf1n0fROur0k9Yse
jJJejJWxZ/SvjMt/bOA+4ybGafZH0lt20DsDWnat5GSQ1EVT1CInN2p8OY8pdecR
QOJBqnNUOykC7/Pyad+IxTxwrOSNCYh+5aYG8AdGquZvNUEwjffVJqrmxDvklY8Z
DTYwGKgNY7NsP/dV0WYYElsAuHiKwiDZL15KftiQebO1fPcZDpTzDo83/8UMfGxh
yegngcNX9Qi7lWtLkUMy8A99UvejM0QrS/Zt8v1zjlQ8PjreZLLBWsNpe0ufIMRk
31ZAC2OS4Koi3wZ54tA7Z1Kh11meGhAk5Ti7sNke0rDqB9UMmj6UKw121cSRvW7q
W6O4U3YeGpKx
=zb4u
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-mmu-6.4' of https://github.com/kvm-x86/linux into HEAD
KVM x86 MMU changes for 6.4:
- Tweak FNAME(sync_spte) to avoid unnecessary writes+flushes when the
guest is only adding new PTEs
- Overhaul .sync_page() and .invlpg() to share the .sync_page()
implementation, i.e. utilize .sync_page()'s optimizations when emulating
invalidations
- Clean up the range-based flushing APIs
- Revamp the TDP MMU's reaping of Accessed/Dirty bits to clear a single
A/D bit using a LOCK AND instead of XCHG, and skip all of the "handle
changed SPTE" overhead associated with writing the entire entry
- Track the number of "tail" entries in a pte_list_desc to avoid having
to walk (potentially) all descriptors during insertion and deletion,
which gets quite expensive if the guest is spamming fork()
- Misc cleanups
- Optimize CR0.WP toggling by avoiding an MMU reload when TDP is enabled,
and by giving the guest control of CR0.WP when EPT is enabled on VMX
(VMX-only because SVM doesn't support per-bit controls)
- Add CR0/CR4 helpers to query single bits, and clean up related code
where KVM was interpreting kvm_read_cr4_bits()'s "unsigned long" return
as a bool
- Move AMD_PSFD to cpufeatures.h and purge KVM's definition
- Misc cleanups
-----BEGIN PGP SIGNATURE-----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=qj7D
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-misc-6.4' of https://github.com/kvm-x86/linux into HEAD
KVM x86 changes for 6.4:
- Optimize CR0.WP toggling by avoiding an MMU reload when TDP is enabled,
and by giving the guest control of CR0.WP when EPT is enabled on VMX
(VMX-only because SVM doesn't support per-bit controls)
- Add CR0/CR4 helpers to query single bits, and clean up related code
where KVM was interpreting kvm_read_cr4_bits()'s "unsigned long" return
as a bool
- Move AMD_PSFD to cpufeatures.h and purge KVM's definition
- Misc cleanups
API:
- Total usage stats now include all that returned error (instead of some).
- Remove maximum hash statesize limit.
- Add cloning support for hmac and unkeyed hashes.
- Demote BUG_ON in crypto_unregister_alg to a WARN_ON.
Algorithms:
- Use RIP-relative addressing on x86 to prepare for PIE build.
- Add accelerated AES/GCM stitched implementation on powerpc P10.
- Add some test vectors for cmac(camellia).
- Remove failure case where jent is unavailable outside of FIPS mode in drbg.
- Add permanent and intermittent health error checks in jitter RNG.
Drivers:
- Add support for 402xx devices in qat.
- Add support for HiSTB TRNG.
- Fix hash concurrency issues in stm32.
- Add OP-TEE firmware support in caam.
-----BEGIN PGP SIGNATURE-----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=ITkW
-----END PGP SIGNATURE-----
Merge tag 'v6.4-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Total usage stats now include all that returned errors (instead of
just some)
- Remove maximum hash statesize limit
- Add cloning support for hmac and unkeyed hashes
- Demote BUG_ON in crypto_unregister_alg to a WARN_ON
Algorithms:
- Use RIP-relative addressing on x86 to prepare for PIE build
- Add accelerated AES/GCM stitched implementation on powerpc P10
- Add some test vectors for cmac(camellia)
- Remove failure case where jent is unavailable outside of FIPS mode
in drbg
- Add permanent and intermittent health error checks in jitter RNG
Drivers:
- Add support for 402xx devices in qat
- Add support for HiSTB TRNG
- Fix hash concurrency issues in stm32
- Add OP-TEE firmware support in caam"
* tag 'v6.4-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (139 commits)
i2c: designware: Add doorbell support for Mendocino
i2c: designware: Use PCI PSP driver for communication
powerpc: Move Power10 feature PPC_MODULE_FEATURE_P10
crypto: p10-aes-gcm - Remove POWER10_CPU dependency
crypto: testmgr - Add some test vectors for cmac(camellia)
crypto: cryptd - Add support for cloning hashes
crypto: cryptd - Convert hash to use modern init_tfm/exit_tfm
crypto: hmac - Add support for cloning
crypto: hash - Add crypto_clone_ahash/shash
crypto: api - Add crypto_clone_tfm
crypto: api - Add crypto_tfm_get
crypto: x86/sha - Use local .L symbols for code
crypto: x86/crc32 - Use local .L symbols for code
crypto: x86/aesni - Use local .L symbols for code
crypto: x86/sha256 - Use RIP-relative addressing
crypto: x86/ghash - Use RIP-relative addressing
crypto: x86/des3 - Use RIP-relative addressing
crypto: x86/crc32c - Use RIP-relative addressing
crypto: x86/cast6 - Use RIP-relative addressing
crypto: x86/cast5 - Use RIP-relative addressing
...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZEYCQAAKCRBZ7Krx/gZQ
64FdAQDZ2hTDyZEWPt486dWYPYpiKyaGFXSXDGo7wgP0fiwxXQEA/mROKb6JqYw6
27mZ9A7qluT8r3AfTTQ0D+Yse/dr4AM=
=GA9W
-----END PGP SIGNATURE-----
Merge tag 'pull-fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs fget updates from Al Viro:
"fget() to fdget() conversions"
* tag 'pull-fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fuse_dev_ioctl(): switch to fdget()
cgroup_get_from_fd(): switch to fdget_raw()
bpf: switch to fdget_raw()
build_mount_idmapped(): switch to fdget()
kill the last remaining user of proc_ns_fget()
SVM-SEV: convert the rest of fget() uses to fdget() in there
convert sgx_set_attribute() to fdget()/fdput()
convert setns(2) to fdget()/fdput()
Rename the Hyper-V hooks for TLB flushing to match the naming scheme used
by all the other TLB flushing hooks, e.g. in kvm_x86_ops, vendor code,
arch hooks from common code, etc.
Reviewed-by: David Matlack <dmatlack@google.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20230405003133.419177-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Fix a "reprogam" => "reprogram" typo in kvm_pmu_request_counter_reprogam().
Fixes: 68fb4757e8 ("KVM: x86/pmu: Defer reprogram_counter() to kvm_pmu_handle_event()")
Signed-off-by: Like Xu <likexu@tencent.com>
Link: https://lore.kernel.org/r/20230310113349.31799-1-likexu@tencent.com
[sean: trim the changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add macros to track the range of VMX feature MSRs that are emulated by
KVM to reduce the maintenance cost of extending the set of emulated MSRs.
Note, KVM doesn't necessarily emulate all known/consumed VMX MSRs, e.g.
PROCBASED_CTLS3 is consumed by KVM to enable IPI virtualization, but is
not emulated as KVM doesn't emulate/virtualize IPI virtualization for
nested guests.
No functional change intended.
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20230311004618.920745-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Rename "r" to "ret" and actually return it from svm_set_msr() to reduce
the probability of repeating the mistake of commit 723d5fb0ff ("kvm:
svm: Add IA32_FLUSH_CMD guest support"), which set "r" thinking that it
would be propagated to the caller.
Alternatively, the declaration of "r" could be moved into the handling of
MSR_TSC_AUX, but that risks variable shadowing in the future. A wrapper
for kvm_set_user_return_msr() would allow eliding a local variable, but
that feels like delaying the inevitable.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230322011440.2195485-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
