Restoration of the host IA32_SPEC_CTRL value is probably too late
with respect to the return thunk training sequence.
With respect to the user/kernel boundary, AMD says, "If software chooses
to toggle STIBP (e.g., set STIBP on kernel entry, and clear it on kernel
exit), software should set STIBP to 1 before executing the return thunk
training sequence." I assume the same requirements apply to the guest/host
boundary. The return thunk training sequence is in vmenter.S, quite close
to the VM-exit. On hosts without V_SPEC_CTRL, however, the host's
IA32_SPEC_CTRL value is not restored until much later.
To avoid this, move the restoration of host SPEC_CTRL to assembly and,
for consistency, move the restoration of the guest SPEC_CTRL as well.
This is not particularly difficult, apart from some care to cover both
32- and 64-bit, and to share code between SEV-ES and normal vmentry.
Cc: stable@vger.kernel.org
Fixes: a149180fbc ("x86: Add magic AMD return-thunk")
Suggested-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allow access to the percpu area via the GS segment base, which is
needed in order to access the saved host spec_ctrl value. In linux-next
FILL_RETURN_BUFFER also needs to access percpu data.
For simplicity, the physical address of the save area is added to struct
svm_cpu_data.
Cc: stable@vger.kernel.org
Fixes: a149180fbc ("x86: Add magic AMD return-thunk")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Analyzed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The svm_data percpu variable is a pointer, but it is allocated via
svm_hardware_setup() when KVM is loaded. Unlike hardware_enable()
this means that it is never NULL for the whole lifetime of KVM, and
static allocation does not waste any memory compared to the status quo.
It is also more efficient and more easily handled from assembly code,
so do it and don't look back.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The "cpu" field of struct svm_cpu_data has been write-only since commit
4b656b1202 ("KVM: SVM: force new asid on vcpu migration", 2009-08-05).
Remove it.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The pointer to svm_cpu_data in struct vcpu_svm looks interesting from
the point of view of accessing it after vmexit, when the GSBASE is still
containing the guest value. However, despite existing since the very
first commit of drivers/kvm/svm.c (commit 6aa8b732ca, "[PATCH] kvm:
userspace interface", 2006-12-10), it was never set to anything.
Ignore the opportunity to fix a 16 year old "bug" and delete it; doing
things the "harder" way makes it possible to remove more old cruft.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Continue moving accesses to struct vcpu_svm to vmenter.S. Reducing the
number of arguments limits the chance of mistakes due to different
registers used for argument passing in 32- and 64-bit ABIs; pushing the
VMCB argument and almost immediately popping it into a different
register looks pretty weird.
32-bit ABI is not a concern for __svm_sev_es_vcpu_run() which is 64-bit
only; however, it will soon need @svm to save/restore SPEC_CTRL so stay
consistent with __svm_vcpu_run() and let them share the same prototype.
No functional change intended.
Cc: stable@vger.kernel.org
Fixes: a149180fbc ("x86: Add magic AMD return-thunk")
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since registers are reachable through vcpu_svm, and we will
need to access more fields of that struct, pass it instead
of the regs[] array.
No functional change intended.
Cc: stable@vger.kernel.org
Fixes: a149180fbc ("x86: Add magic AMD return-thunk")
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM/s390, KVM/x86 and common infrastructure changes for 5.20
x86:
* Permit guests to ignore single-bit ECC errors
* Fix races in gfn->pfn cache refresh; do not pin pages tracked by the cache
* Intel IPI virtualization
* Allow getting/setting pending triple fault with KVM_GET/SET_VCPU_EVENTS
* PEBS virtualization
* Simplify PMU emulation by just using PERF_TYPE_RAW events
* More accurate event reinjection on SVM (avoid retrying instructions)
* Allow getting/setting the state of the speaker port data bit
* Refuse starting the kvm-intel module if VM-Entry/VM-Exit controls are inconsistent
* "Notify" VM exit (detect microarchitectural hangs) for Intel
* Cleanups for MCE MSR emulation
s390:
* add an interface to provide a hypervisor dump for secure guests
* improve selftests to use TAP interface
* enable interpretive execution of zPCI instructions (for PCI passthrough)
* First part of deferred teardown
* CPU Topology
* PV attestation
* Minor fixes
Generic:
* new selftests API using struct kvm_vcpu instead of a (vm, id) tuple
x86:
* Use try_cmpxchg64 instead of cmpxchg64
* Bugfixes
* Ignore benign host accesses to PMU MSRs when PMU is disabled
* Allow disabling KVM's "MONITOR/MWAIT are NOPs!" behavior
* x86/MMU: Allow NX huge pages to be disabled on a per-vm basis
* Port eager page splitting to shadow MMU as well
* Enable CMCI capability by default and handle injected UCNA errors
* Expose pid of vcpu threads in debugfs
* x2AVIC support for AMD
* cleanup PIO emulation
* Fixes for LLDT/LTR emulation
* Don't require refcounted "struct page" to create huge SPTEs
x86 cleanups:
* Use separate namespaces for guest PTEs and shadow PTEs bitmasks
* PIO emulation
* Reorganize rmap API, mostly around rmap destruction
* Do not workaround very old KVM bugs for L0 that runs with nesting enabled
* new selftests API for CPUID
- Avoid toggling the x2apic msr interception if it is already up to date.
- Avoid touching L0 msr bitmap when AVIC is inhibited on entry to
the guest mode, because in this case the guest usually uses its
own msr bitmap.
Later on VM exit, the 1st optimization will allow KVM to skip
touching the L0 msr bitmap as well.
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Tested-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220519102709.24125-18-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce logic to (de)activate AVIC, which also allows
switching between AVIC to x2AVIC mode at runtime.
When an AVIC-enabled guest switches from APIC to x2APIC mode,
the SVM driver needs to perform the following steps:
1. Set the x2APIC mode bit for AVIC in VMCB along with the maximum
APIC ID support for each mode accodingly.
2. Disable x2APIC MSRs interception in order to allow the hardware
to virtualize x2APIC MSRs accesses.
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <20220519102709.24125-12-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As a preparation for x2avic, this patch ensures that x2apic msrs
are always intercepted for the nested guest.
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Tested-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220519102709.24125-11-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
AMD AVIC can support xAPIC and x2APIC virtualization,
which requires changing x2APIC bit VMCB and MSR intercepton
for x2APIC MSRs. Therefore, call avic_refresh_apicv_exec_ctrl()
to refresh configuration accordingly.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <20220519102709.24125-10-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When enabling x2APIC virtualization (x2AVIC), the interception of
x2APIC MSRs must be disabled to let the hardware virtualize guest
MSR accesses.
Current implementation keeps track of list of MSR interception state
in the svm_direct_access_msrs array. Therefore, extends the array to
include x2APIC MSRs.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <20220519102709.24125-8-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add CPUID check for the x2APIC virtualization (x2AVIC) feature.
If available, the SVM driver can support both AVIC and x2AVIC modes
when load the kvm_amd driver with avic=1. The operating mode will be
determined at runtime depending on the guest APIC mode.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <20220519102709.24125-4-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The target VMCBs during an intra-host migration need to correctly setup
for running SEV and SEV-ES guests. Add sev_init_vmcb() function and make
sev_es_init_vmcb() static. sev_init_vmcb() uses the now private function
to init SEV-ES guests VMCBs when needed.
Fixes: 0b020f5af0 ("KVM: SEV: Add support for SEV-ES intra host migration")
Fixes: b56639318b ("KVM: SEV: Add support for SEV intra host migration")
Signed-off-by: Peter Gonda <pgonda@google.com>
Cc: Marc Orr <marcorr@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Message-Id: <20220623173406.744645-1-pgonda@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop a handful of unused AVIC function declarations whose implementations
were removed during the conversion to optional static calls.
No functional change intended.
Fixes: abb6d479e2 ("KVM: x86: make several APIC virtualization callbacks optional")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220614230548.3852141-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
s390:
* add an interface to provide a hypervisor dump for secure guests
* improve selftests to show tests
x86:
* Intel IPI virtualization
* Allow getting/setting pending triple fault with KVM_GET/SET_VCPU_EVENTS
* PEBS virtualization
* Simplify PMU emulation by just using PERF_TYPE_RAW events
* More accurate event reinjection on SVM (avoid retrying instructions)
* Allow getting/setting the state of the speaker port data bit
* Rewrite gfn-pfn cache refresh
* Refuse starting the module if VM-Entry/VM-Exit controls are inconsistent
* "Notify" VM exit
Now that these functions are always called with preemption disabled,
remove the preempt_disable()/preempt_enable() pair inside them.
No functional change intended.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220606180829.102503-8-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A NMI that L1 wants to inject into its L2 should be directly re-injected,
without causing L0 side effects like engaging NMI blocking for L1.
It's also worth noting that in this case it is L1 responsibility
to track the NMI window status for its L2 guest.
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <f894d13501cd48157b3069a4b4c7369575ddb60e.1651440202.git.maciej.szmigiero@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Re-inject INT3/INTO instead of retrying the instruction if the CPU
encountered an intercepted exception while vectoring the software
exception, e.g. if vectoring INT3 encounters a #PF and KVM is using
shadow paging. Retrying the instruction is architecturally wrong, e.g.
will result in a spurious #DB if there's a code breakpoint on the INT3/O,
and lack of re-injection also breaks nested virtualization, e.g. if L1
injects a software exception and vectoring the injected exception
encounters an exception that is intercepted by L0 but not L1.
Due to, ahem, deficiencies in the SVM architecture, acquiring the next
RIP may require flowing through the emulator even if NRIPS is supported,
as the CPU clears next_rip if the VM-Exit is due to an exception other
than "exceptions caused by the INT3, INTO, and BOUND instructions". To
deal with this, "skip" the instruction to calculate next_rip (if it's
not already known), and then unwind the RIP write and any side effects
(RFLAGS updates).
Save the computed next_rip and use it to re-stuff next_rip if injection
doesn't complete. This allows KVM to do the right thing if next_rip was
known prior to injection, e.g. if L1 injects a soft event into L2, and
there is no backing INTn instruction, e.g. if L1 is injecting an
arbitrary event.
Note, it's impossible to guarantee architectural correctness given SVM's
architectural flaws. E.g. if the guest executes INTn (no KVM injection),
an exit occurs while vectoring the INTn, and the guest modifies the code
stream while the exit is being handled, KVM will compute the incorrect
next_rip due to "skipping" the wrong instruction. A future enhancement
to make this less awful would be for KVM to detect that the decoded
instruction is not the correct INTn and drop the to-be-injected soft
event (retrying is a lesser evil compared to shoving the wrong RIP on the
exception stack).
Reported-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <65cb88deab40bc1649d509194864312a89bbe02e.1651440202.git.maciej.szmigiero@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The next_rip field of a VMCB is *not* an output-only field for a VMRUN.
This field value (instead of the saved guest RIP) in used by the CPU for
the return address pushed on stack when injecting a software interrupt or
INT3 or INTO exception.
Make sure this field gets synced from vmcb12 to vmcb02 when entering L2 or
loading a nested state and NRIPS is exposed to L1. If NRIPS is supported
in hardware but not exposed to L1 (nrips=0 or hidden by userspace), stuff
vmcb02's next_rip from the new L2 RIP to emulate a !NRIPS CPU (which
saves RIP on the stack as-is).
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <c2e0a3d78db3ae30530f11d4e9254b452a89f42b.1651440202.git.maciej.szmigiero@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SVM uses a per-cpu variable to cache the current value of the
tsc scaling multiplier msr on each cpu.
Commit 1ab9287add
("KVM: X86: Add vendor callbacks for writing the TSC multiplier")
broke this caching logic.
Refactor the code so that all TSC scaling multiplier writes go through
a single function which checks and updates the cache.
This fixes the following scenario:
1. A CPU runs a guest with some tsc scaling ratio.
2. New guest with different tsc scaling ratio starts on this CPU
and terminates almost immediately.
This ensures that the short running guest had set the tsc scaling ratio just
once when it was set via KVM_SET_TSC_KHZ. Due to the bug,
the per-cpu cache is not updated.
3. The original guest continues to run, it doesn't restore the msr
value back to its own value, because the cache matches,
and thus continues to run with a wrong tsc scaling ratio.
Fixes: 1ab9287add ("KVM: X86: Add vendor callbacks for writing the TSC multiplier")
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220606181149.103072-1-mlevitsk@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* ultravisor communication device driver
* fix TEID on terminating storage key ops
RISC-V:
* Added Sv57x4 support for G-stage page table
* Added range based local HFENCE functions
* Added remote HFENCE functions based on VCPU requests
* Added ISA extension registers in ONE_REG interface
* Updated KVM RISC-V maintainers entry to cover selftests support
ARM:
* Add support for the ARMv8.6 WFxT extension
* Guard pages for the EL2 stacks
* Trap and emulate AArch32 ID registers to hide unsupported features
* Ability to select and save/restore the set of hypercalls exposed
to the guest
* Support for PSCI-initiated suspend in collaboration with userspace
* GICv3 register-based LPI invalidation support
* Move host PMU event merging into the vcpu data structure
* GICv3 ITS save/restore fixes
* The usual set of small-scale cleanups and fixes
x86:
* New ioctls to get/set TSC frequency for a whole VM
* Allow userspace to opt out of hypercall patching
* Only do MSR filtering for MSRs accessed by rdmsr/wrmsr
AMD SEV improvements:
* Add KVM_EXIT_SHUTDOWN metadata for SEV-ES
* V_TSC_AUX support
Nested virtualization improvements for AMD:
* Support for "nested nested" optimizations (nested vVMLOAD/VMSAVE,
nested vGIF)
* Allow AVIC to co-exist with a nested guest running
* Fixes for LBR virtualizations when a nested guest is running,
and nested LBR virtualization support
* PAUSE filtering for nested hypervisors
Guest support:
* Decoupling of vcpu_is_preempted from PV spinlocks
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmKN9M4UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNLeAf+KizAlQwxEehHHeNyTkZuKyMawrD6
zsqAENR6i1TxiXe7fDfPFbO2NR0ZulQopHbD9mwnHJ+nNw0J4UT7g3ii1IAVcXPu
rQNRGMVWiu54jt+lep8/gDg0JvPGKVVKLhxUaU1kdWT9PhIOC6lwpP3vmeWkUfRi
PFL/TMT0M8Nfryi0zHB0tXeqg41BiXfqO8wMySfBAHUbpv8D53D2eXQL6YlMM0pL
2quB1HxHnpueE5vj3WEPQ3PCdy1M2MTfCDBJAbZGG78Ljx45FxSGoQcmiBpPnhJr
C6UGP4ZDWpml5YULUoA70k5ylCbP+vI61U4vUtzEiOjHugpPV5wFKtx5nw==
=ozWx
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"S390:
- ultravisor communication device driver
- fix TEID on terminating storage key ops
RISC-V:
- Added Sv57x4 support for G-stage page table
- Added range based local HFENCE functions
- Added remote HFENCE functions based on VCPU requests
- Added ISA extension registers in ONE_REG interface
- Updated KVM RISC-V maintainers entry to cover selftests support
ARM:
- Add support for the ARMv8.6 WFxT extension
- Guard pages for the EL2 stacks
- Trap and emulate AArch32 ID registers to hide unsupported features
- Ability to select and save/restore the set of hypercalls exposed to
the guest
- Support for PSCI-initiated suspend in collaboration with userspace
- GICv3 register-based LPI invalidation support
- Move host PMU event merging into the vcpu data structure
- GICv3 ITS save/restore fixes
- The usual set of small-scale cleanups and fixes
x86:
- New ioctls to get/set TSC frequency for a whole VM
- Allow userspace to opt out of hypercall patching
- Only do MSR filtering for MSRs accessed by rdmsr/wrmsr
AMD SEV improvements:
- Add KVM_EXIT_SHUTDOWN metadata for SEV-ES
- V_TSC_AUX support
Nested virtualization improvements for AMD:
- Support for "nested nested" optimizations (nested vVMLOAD/VMSAVE,
nested vGIF)
- Allow AVIC to co-exist with a nested guest running
- Fixes for LBR virtualizations when a nested guest is running, and
nested LBR virtualization support
- PAUSE filtering for nested hypervisors
Guest support:
- Decoupling of vcpu_is_preempted from PV spinlocks"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (199 commits)
KVM: x86: Fix the intel_pt PMI handling wrongly considered from guest
KVM: selftests: x86: Sync the new name of the test case to .gitignore
Documentation: kvm: reorder ARM-specific section about KVM_SYSTEM_EVENT_SUSPEND
x86, kvm: use correct GFP flags for preemption disabled
KVM: LAPIC: Drop pending LAPIC timer injection when canceling the timer
x86/kvm: Alloc dummy async #PF token outside of raw spinlock
KVM: x86: avoid calling x86 emulator without a decoded instruction
KVM: SVM: Use kzalloc for sev ioctl interfaces to prevent kernel data leak
x86/fpu: KVM: Set the base guest FPU uABI size to sizeof(struct kvm_xsave)
s390/uv_uapi: depend on CONFIG_S390
KVM: selftests: x86: Fix test failure on arch lbr capable platforms
KVM: LAPIC: Trace LAPIC timer expiration on every vmentry
KVM: s390: selftest: Test suppression indication on key prot exception
KVM: s390: Don't indicate suppression on dirtying, failing memop
selftests: drivers/s390x: Add uvdevice tests
drivers/s390/char: Add Ultravisor io device
MAINTAINERS: Update KVM RISC-V entry to cover selftests support
RISC-V: KVM: Introduce ISA extension register
RISC-V: KVM: Cleanup stale TLB entries when host CPU changes
RISC-V: KVM: Add remote HFENCE functions based on VCPU requests
...
- Add support for the ARMv8.6 WFxT extension
- Guard pages for the EL2 stacks
- Trap and emulate AArch32 ID registers to hide unsupported features
- Ability to select and save/restore the set of hypercalls exposed
to the guest
- Support for PSCI-initiated suspend in collaboration with userspace
- GICv3 register-based LPI invalidation support
- Move host PMU event merging into the vcpu data structure
- GICv3 ITS save/restore fixes
- The usual set of small-scale cleanups and fixes
-----BEGIN PGP SIGNATURE-----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=mh7W
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 5.19
- Add support for the ARMv8.6 WFxT extension
- Guard pages for the EL2 stacks
- Trap and emulate AArch32 ID registers to hide unsupported features
- Ability to select and save/restore the set of hypercalls exposed
to the guest
- Support for PSCI-initiated suspend in collaboration with userspace
- GICv3 register-based LPI invalidation support
- Move host PMU event merging into the vcpu data structure
- GICv3 ITS save/restore fixes
- The usual set of small-scale cleanups and fixes
[Due to the conflict, KVM_SYSTEM_EVENT_SEV_TERM is relocated
from 4 to 6. - Paolo]
Add to confidential guests the necessary memory integrity protection
against malicious hypervisor-based attacks like data replay, memory
remapping and others, thus achieving a stronger isolation from the
hypervisor.
At the core of the functionality is a new structure called a reverse
map table (RMP) with which the guest has a say in which pages get
assigned to it and gets notified when a page which it owns, gets
accessed/modified under the covers so that the guest can take an
appropriate action.
In addition, add support for the whole machinery needed to launch a SNP
guest, details of which is properly explained in each patch.
And last but not least, the series refactors and improves parts of the
previous SEV support so that the new code is accomodated properly and
not just bolted on.
-----BEGIN PGP SIGNATURE-----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=Y8kW
-----END PGP SIGNATURE-----
Merge tag 'x86_sev_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull AMD SEV-SNP support from Borislav Petkov:
"The third AMD confidential computing feature called Secure Nested
Paging.
Add to confidential guests the necessary memory integrity protection
against malicious hypervisor-based attacks like data replay, memory
remapping and others, thus achieving a stronger isolation from the
hypervisor.
At the core of the functionality is a new structure called a reverse
map table (RMP) with which the guest has a say in which pages get
assigned to it and gets notified when a page which it owns, gets
accessed/modified under the covers so that the guest can take an
appropriate action.
In addition, add support for the whole machinery needed to launch a
SNP guest, details of which is properly explained in each patch.
And last but not least, the series refactors and improves parts of the
previous SEV support so that the new code is accomodated properly and
not just bolted on"
* tag 'x86_sev_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits)
x86/entry: Fixup objtool/ibt validation
x86/sev: Mark the code returning to user space as syscall gap
x86/sev: Annotate stack change in the #VC handler
x86/sev: Remove duplicated assignment to variable info
x86/sev: Fix address space sparse warning
x86/sev: Get the AP jump table address from secrets page
x86/sev: Add missing __init annotations to SEV init routines
virt: sevguest: Rename the sevguest dir and files to sev-guest
virt: sevguest: Change driver name to reflect generic SEV support
x86/boot: Put globals that are accessed early into the .data section
x86/boot: Add an efi.h header for the decompressor
virt: sevguest: Fix bool function returning negative value
virt: sevguest: Fix return value check in alloc_shared_pages()
x86/sev-es: Replace open-coded hlt-loop with sev_es_terminate()
virt: sevguest: Add documentation for SEV-SNP CPUID Enforcement
virt: sevguest: Add support to get extended report
virt: sevguest: Add support to derive key
virt: Add SEV-SNP guest driver
x86/sev: Register SEV-SNP guest request platform device
x86/sev: Provide support for SNP guest request NAEs
...
The TSC_AUX virtualization feature allows AMD SEV-ES guests to securely use
TSC_AUX (auxiliary time stamp counter data) in the RDTSCP and RDPID
instructions. The TSC_AUX value is set using the WRMSR instruction to the
TSC_AUX MSR (0xC0000103). It is read by the RDMSR, RDTSCP and RDPID
instructions. If the read/write of the TSC_AUX MSR is intercepted, then
RDTSCP and RDPID must also be intercepted when TSC_AUX virtualization
is present. However, the RDPID instruction can't be intercepted. This means
that when TSC_AUX virtualization is present, RDTSCP and TSC_AUX MSR
read/write must not be intercepted for SEV-ES (or SEV-SNP) guests.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Message-Id: <165040164424.1399644.13833277687385156344.stgit@bmoger-ubuntu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Flush the CPU caches when memory is reclaimed from an SEV guest (where
reclaim also includes it being unmapped from KVM's memslots). Due to lack
of coherency for SEV encrypted memory, failure to flush results in silent
data corruption if userspace is malicious/broken and doesn't ensure SEV
guest memory is properly pinned and unpinned.
Cache coherency is not enforced across the VM boundary in SEV (AMD APM
vol.2 Section 15.34.7). Confidential cachelines, generated by confidential
VM guests have to be explicitly flushed on the host side. If a memory page
containing dirty confidential cachelines was released by VM and reallocated
to another user, the cachelines may corrupt the new user at a later time.
KVM takes a shortcut by assuming all confidential memory remain pinned
until the end of VM lifetime. Therefore, KVM does not flush cache at
mmu_notifier invalidation events. Because of this incorrect assumption and
the lack of cache flushing, malicous userspace can crash the host kernel:
creating a malicious VM and continuously allocates/releases unpinned
confidential memory pages when the VM is running.
Add cache flush operations to mmu_notifier operations to ensure that any
physical memory leaving the guest VM get flushed. In particular, hook
mmu_notifier_invalidate_range_start and mmu_notifier_release events and
flush cache accordingly. The hook after releasing the mmu lock to avoid
contention with other vCPUs.
Cc: stable@vger.kernel.org
Suggested-by: Sean Christpherson <seanjc@google.com>
Reported-by: Mingwei Zhang <mizhang@google.com>
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Message-Id: <20220421031407.2516575-4-mizhang@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The save area for SEV-ES/SEV-SNP guests, as used by the hardware, is
different from the save area of a non SEV-ES/SEV-SNP guest.
This is the first step in defining the multiple save areas to keep them
separate and ensuring proper operation amongst the different types of
guests. Create an SEV-ES/SEV-SNP save area and adjust usage to the new
save area definition where needed.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Venu Busireddy <venu.busireddy@oracle.com>
Link: https://lore.kernel.org/r/20220405182743.308853-1-brijesh.singh@amd.com
Inhibit the AVIC of the vCPU that is running nested for the duration of the
nested run, so that all interrupts arriving from both its vCPU siblings
and from KVM are delivered using normal IPIs and cause that vCPU to vmexit.
Note that unlike normal AVIC inhibition, there is no need to
update the AVIC mmio memslot, because the nested guest uses its
own set of paging tables.
That also means that AVIC doesn't need to be inhibited VM wide.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220322174050.241850-7-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In case L1 enables vGIF for L2, the L2 cannot affect L1's GIF, regardless
of STGI/CLGI intercepts, and since VM entry enables GIF, this means
that L1's GIF is always 1 while L2 is running.
Thus in this case leave L1's vGIF in vmcb01, while letting L2
control the vGIF thus implementing nested vGIF.
Also allow KVM to toggle L1's GIF during nested entry/exit
by always using vmcb01.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220322174050.241850-5-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Expose the pause filtering and threshold in the guest CPUID
and support PAUSE filtering when possible:
- If the L0 doesn't intercept PAUSE (cpu_pm=on), then allow L1 to
have full control over PAUSE filtering.
- if the L1 doesn't intercept PAUSE, use host values and update
the adaptive count/threshold even when running nested.
- Otherwise always exit to L1; it is not really possible to merge
the fields correctly. It is expected that in this case, userspace
will not enable this feature in the guest CPUID, to avoid having the
guest update both fields pointlessly.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220322174050.241850-4-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This was tested with kvm-unit-test that was developed
for this purpose.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220322174050.241850-3-mlevitsk@redhat.com>
[Copy all of DEBUGCTL except for reserved bits. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When L2 is running without LBR virtualization, we should ensure
that L1's LBR msrs continue to update as usual.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220322174050.241850-2-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM always uses vgif when allowed, thus there is
no need to query current vmcb for it
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220322172449.235575-9-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Clarify that this function is not used to initialize any part of
the vmcb02. No functional change intended.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This was tested by booting L1,L2,L3 (all Linux) and checking
that no VMLOAD/VMSAVE vmexits happened.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220301143650.143749-4-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Due to wrong rebase, commit
4a204f7895 ("KVM: SVM: Allow AVIC support on system w/ physical APIC ID > 255")
moved avic spec #defines back to avic.c.
Move them back, and while at it extend AVIC_DOORBELL_PHYSICAL_ID_MASK to 12
bits as well (it will be used in nested avic)
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220322172449.235575-5-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use an enum for the APICv inhibit reasons, there is no meaning behind
their values and they most definitely are not "unsigned longs". Rename
the various params to "reason" for consistency and clarity (inhibit may
be confused as a command, i.e. inhibit APICv, instead of the reason that
is getting toggled/checked).
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220311043517.17027-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Include kvm_cache_regs.h to pick up the definition of is_guest_mode(),
which is referenced by nested_svm_virtualize_tpr() in svm.h. Remove
include from svm_onhpyerv.c which was done only because of lack of
include in svm.h.
Fixes: 883b0a91f4 ("KVM: SVM: Move Nested SVM Implementation to nested.c")
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Peter Gonda <pgonda@google.com>
Message-Id: <20220304161032.2270688-1-pgonda@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Expand KVM's mask for the AVIC host physical ID to the full 12 bits defined
by the architecture. The number of bits consumed by hardware is model
specific, e.g. early CPUs ignored bits 11:8, but there is no way for KVM
to enumerate the "true" size. So, KVM must allow using all bits, else it
risks rejecting completely legal x2APIC IDs on newer CPUs.
This means KVM relies on hardware to not assign x2APIC IDs that exceed the
"true" width of the field, but presumably hardware is smart enough to tie
the width to the max x2APIC ID. KVM also relies on hardware to support at
least 8 bits, as the legacy xAPIC ID is writable by software. But, those
assumptions are unavoidable due to the lack of any way to enumerate the
"true" width.
Cc: stable@vger.kernel.org
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Fixes: 44a95dae1d ("KVM: x86: Detect and Initialize AVIC support")
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <20220211000851.185799-1-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Disable preemption when loading/putting the AVIC during an APICv refresh.
If the vCPU task is preempted and migrated ot a different pCPU, the
unprotected avic_vcpu_load() could set the wrong pCPU in the physical ID
cache/table.
Pull the necessary code out of avic_vcpu_{,un}blocking() and into a new
helper to reduce the probability of introducing this exact bug a third
time.
Fixes: df7e4827c5 ("KVM: SVM: call avic_vcpu_load/avic_vcpu_put when enabling/disabling AVIC")
Cc: stable@vger.kernel.org
Reported-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All their invocations are conditional on vcpu->arch.apicv_active,
meaning that they need not be implemented by vendor code: even
though at the moment both vendors implement APIC virtualization,
all of them can be optional. In fact SVM does not need many of
them, and their implementation can be deleted now.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For SEV-ES VMs with mirrors to be intra-host migrated they need to be
able to migrate with the mirror. This is due to that fact that all VMSAs
need to be added into the VM with LAUNCH_UPDATE_VMSA before
lAUNCH_FINISH. Allowing migration with mirrors allows users of SEV-ES to
keep the mirror VMs VMSAs during migration.
Adds a list of mirror VMs for the original VM iterate through during its
migration. During the iteration the owner pointers can be updated from
the source to the destination. This fixes the ASID leaking issue which
caused the blocking of migration of VMs with mirrors.
Signed-off-by: Peter Gonda <pgonda@google.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Marc Orr <marcorr@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Message-Id: <20220211193634.3183388-1-pgonda@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use "avic" instead of "svm" for SVM's all of APICv hooks and make a few
additional funciton name tweaks so that the AVIC functions conform to
their associated kvm_x86_ops hooks.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220128005208.4008533-19-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If svm_deliver_avic_intr is called just after the target vcpu's AVIC got
inhibited, it might read a stale value of vcpu->arch.apicv_active
which can lead to the target vCPU not noticing the interrupt.
To fix this use load-acquire/store-release so that, if the target vCPU
is IN_GUEST_MODE, we're guaranteed to see a previous disabling of the
AVIC. If AVIC has been disabled in the meanwhile, proceed with the
KVM_REQ_EVENT-based delivery.
Incomplete IPI vmexit has the same races as svm_deliver_avic_intr, and
in fact it can be handled in exactly the same way; the only difference
lies in who has set IRR, whether svm_deliver_interrupt or the processor.
Therefore, svm_complete_interrupt_delivery can be used to fix incomplete
IPI vmexits as well.
Co-developed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Similar to nVMX commit 502d2bf5f2 ("KVM: nVMX: Implement Enlightened MSR
Bitmap feature"), add support for the feature for nSVM (Hyper-V on KVM).
Notable differences from nVMX implementation:
- As the feature uses SW reserved fields in VMCB control, KVM needs to
make sure it's dealing with a Hyper-V guest (kvm_hv_hypercall_enabled()).
- 'msrpm_base_pa' needs to be always be overwritten in
nested_svm_vmrun_msrpm(), even when the update is skipped. As an
optimization, nested_vmcb02_prepare_control() copies it from VMCB01
so when MSR-Bitmap feature for L2 is disabled nothing needs to be done.
- 'struct vmcb_ctrl_area_cached' needs to be extended with clean
fields/sw reserved data and __nested_copy_vmcb_control_to_cache() needs to
copy it so nested_svm_vmrun_msrpm() can use it later.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220202095100.129834-5-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Similar to nVMX commit ed2a4800ae ("KVM: nVMX: Track whether changes in
L0 require MSR bitmap for L2 to be rebuilt"), introduce a flag to keep
track of whether MSR bitmap for L2 needs to be rebuilt due to changes in
MSR bitmap for L1 or switching to a different L2.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220202095100.129834-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Massage SVM's implementation names that still diverge from kvm_x86_ops to
allow for wiring up all SVM-defined functions via kvm-x86-ops.h.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220128005208.4008533-22-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename svm_vm_copy_asid_from() and svm_vm_migrate_from() to conform to
the names used by kvm_x86_ops, and opportunistically use "sev" instead of
"svm" to more precisely identify the role of the hooks.
svm_vm_copy_asid_from() in particular was poorly named as the function
does much more than simply copy the ASID.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220128005208.4008533-21-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use slightly more verbose names for the so called "memory encrypt",
a.k.a. "mem enc", kvm_x86_ops hooks to bridge the gap between the current
super short kvm_x86_ops names and SVM's more verbose, but non-conforming
names. This is a step toward using kvm-x86-ops.h with KVM_X86_CVM_OP()
to fill svm_x86_ops.
Opportunistically rename mem_enc_op() to mem_enc_ioctl() to better
reflect its true nature, as it really is a full fledged ioctl() of its
own. Ideally, the hook would be named confidential_vm_ioctl() or so, as
the ioctl() is a gateway to more than just memory encryption, and because
its underlying purpose to support Confidential VMs, which can be provided
without memory encryption, e.g. if the TCB of the guest includes the host
kernel but not host userspace, or by isolation in hardware without
encrypting memory. But, diverging from KVM_MEMORY_ENCRYPT_OP even
further is undeseriable, and short of creating alises for all related
ioctl()s, which introduces a different flavor of divergence, KVM is stuck
with the nomenclature.
Defer renaming SVM's functions to a future commit as there are additional
changes needed to make SVM fully conforming and to match reality (looking
at you, svm_vm_copy_asid_from()).
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220128005208.4008533-20-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename svm_flush_tlb() to svm_flush_tlb_current() so that at least one of
the flushing operations in svm_x86_ops can be filled via kvm-x86-ops.h,
and to document the scope of the flush (specifically that it doesn't
flush "all").
Opportunistically make svm_tlb_flush_current(), was svm_flush_tlb(),
static.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220128005208.4008533-17-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM performs the VMSAVE to the host save area for both regular and SEV-ES
guests, so hoist it up to svm_prepare_guest_switch. And because
sev_es_prepare_guest_switch does not really need to know the details
of struct svm_cpu_data *, just pass it the pointer to the host save area
inside the HSAVE page.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
asm/svm.h is the correct place for all values that are defined in
the SVM spec, and that includes AVIC.
Also add some values from the spec that were not defined before
and will be soon useful.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220207155447.840194-10-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Forcibly leave nested virtualization operation if userspace toggles SMM
state via KVM_SET_VCPU_EVENTS or KVM_SYNC_X86_EVENTS. If userspace
forces the vCPU out of SMM while it's post-VMXON and then injects an SMI,
vmx_enter_smm() will overwrite vmx->nested.smm.vmxon and end up with both
vmxon=false and smm.vmxon=false, but all other nVMX state allocated.
Don't attempt to gracefully handle the transition as (a) most transitions
are nonsencial, e.g. forcing SMM while L2 is running, (b) there isn't
sufficient information to handle all transitions, e.g. SVM wants access
to the SMRAM save state, and (c) KVM_SET_VCPU_EVENTS must precede
KVM_SET_NESTED_STATE during state restore as the latter disallows putting
the vCPU into L2 if SMM is active, and disallows tagging the vCPU as
being post-VMXON in SMM if SMM is not active.
Abuse of KVM_SET_VCPU_EVENTS manifests as a WARN and memory leak in nVMX
due to failure to free vmcs01's shadow VMCS, but the bug goes far beyond
just a memory leak, e.g. toggling SMM on while L2 is active puts the vCPU
in an architecturally impossible state.
WARNING: CPU: 0 PID: 3606 at free_loaded_vmcs arch/x86/kvm/vmx/vmx.c:2665 [inline]
WARNING: CPU: 0 PID: 3606 at free_loaded_vmcs+0x158/0x1a0 arch/x86/kvm/vmx/vmx.c:2656
Modules linked in:
CPU: 1 PID: 3606 Comm: syz-executor725 Not tainted 5.17.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:free_loaded_vmcs arch/x86/kvm/vmx/vmx.c:2665 [inline]
RIP: 0010:free_loaded_vmcs+0x158/0x1a0 arch/x86/kvm/vmx/vmx.c:2656
Code: <0f> 0b eb b3 e8 8f 4d 9f 00 e9 f7 fe ff ff 48 89 df e8 92 4d 9f 00
Call Trace:
<TASK>
kvm_arch_vcpu_destroy+0x72/0x2f0 arch/x86/kvm/x86.c:11123
kvm_vcpu_destroy arch/x86/kvm/../../../virt/kvm/kvm_main.c:441 [inline]
kvm_destroy_vcpus+0x11f/0x290 arch/x86/kvm/../../../virt/kvm/kvm_main.c:460
kvm_free_vcpus arch/x86/kvm/x86.c:11564 [inline]
kvm_arch_destroy_vm+0x2e8/0x470 arch/x86/kvm/x86.c:11676
kvm_destroy_vm arch/x86/kvm/../../../virt/kvm/kvm_main.c:1217 [inline]
kvm_put_kvm+0x4fa/0xb00 arch/x86/kvm/../../../virt/kvm/kvm_main.c:1250
kvm_vm_release+0x3f/0x50 arch/x86/kvm/../../../virt/kvm/kvm_main.c:1273
__fput+0x286/0x9f0 fs/file_table.c:311
task_work_run+0xdd/0x1a0 kernel/task_work.c:164
exit_task_work include/linux/task_work.h:32 [inline]
do_exit+0xb29/0x2a30 kernel/exit.c:806
do_group_exit+0xd2/0x2f0 kernel/exit.c:935
get_signal+0x4b0/0x28c0 kernel/signal.c:2862
arch_do_signal_or_restart+0x2a9/0x1c40 arch/x86/kernel/signal.c:868
handle_signal_work kernel/entry/common.c:148 [inline]
exit_to_user_mode_loop kernel/entry/common.c:172 [inline]
exit_to_user_mode_prepare+0x17d/0x290 kernel/entry/common.c:207
__syscall_exit_to_user_mode_work kernel/entry/common.c:289 [inline]
syscall_exit_to_user_mode+0x19/0x60 kernel/entry/common.c:300
do_syscall_64+0x42/0xb0 arch/x86/entry/common.c:86
entry_SYSCALL_64_after_hwframe+0x44/0xae
</TASK>
Cc: stable@vger.kernel.org
Reported-by: syzbot+8112db3ab20e70d50c31@syzkaller.appspotmail.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220125220358.2091737-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 3fa5e8fd0a ("KVM: SVM: delay svm_vcpu_init_msrpm after
svm->vmcb is initialized") re-arranged svm_vcpu_init_msrpm() call in
svm_create_vcpu(), thus making the comment about vmcb being NULL
obsolete. Drop it.
While on it, drop superfluous vmcb_is_clean() check: vmcb_mark_dirty()
is a bit flip, an extra check is unlikely to bring any performance gain.
Drop now-unneeded vmcb_is_clean() helper as well.
Fixes: 3fa5e8fd0a ("KVM: SVM: delay svm_vcpu_init_msrpm after svm->vmcb is initialized")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20211220152139.418372-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Nullify svm_x86_ops.vcpu_(un)blocking if AVIC/APICv is disabled as the
hooks are necessary only to clear the vCPU's IsRunning entry in the
Physical APIC and to update IRTE entries if the VM has a pass-through
device attached.
Opportunistically rename the helpers to clarify their AVIC relationship.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211208015236.1616697-24-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use kvm_vcpu_is_blocking() to determine whether or not the vCPU should be
marked running during avic_vcpu_load(). Drop avic_is_running, which
really should have been named "vcpu_is_not_blocking", as it tracked if
the vCPU was blocking, not if it was actually running, e.g. it was set
during svm_create_vcpu() when the vCPU was obviously not running.
This is technically a teeny tiny functional change, as the vCPU will be
marked IsRunning=1 on being reloaded if the vCPU is preempted between
svm_vcpu_blocking() and prepare_to_rcuwait(). But that's a benign change
as the vCPU will be marked IsRunning=0 when KVM voluntarily schedules out
the vCPU.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211208015236.1616697-14-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop the avic_vcpu_is_running() check when waking vCPUs in response to a
VM-Exit due to incomplete IPI delivery. The check isn't wrong per se, but
it's not 100% accurate in the sense that it doesn't guarantee that the vCPU
was one of the vCPUs that didn't receive the IPI.
The check isn't required for correctness as blocking == !running in this
context.
From a performance perspective, waking a live task is not expensive as the
only moderately costly operation is a locked operation to temporarily
disable preemption. And if that is indeed a performance issue,
kvm_vcpu_is_blocking() would be a better check than poking into the AVIC.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20211208015236.1616697-12-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The new module parameter to control PMU virtualization should apply
to Intel as well as AMD, for situations where userspace is not trusted.
If the module parameter allows PMU virtualization, there could be a
new KVM_CAP or guest CPUID bits whereby userspace can enable/disable
PMU virtualization on a per-VM basis.
If the module parameter does not allow PMU virtualization, there
should be no userspace override, since we have no precedent for
authorizing that kind of override. If it's false, other counter-based
profiling features (such as LBR including the associated CPUID bits
if any) will not be exposed.
Change its name from "pmu" to "enable_pmu" as we have temporary
variables with the same name in our code like "struct kvm_pmu *pmu".
Fixes: b1d66dad65 ("KVM: x86/svm: Add module param to control PMU virtualization")
Suggested-by : Jim Mattson <jmattson@google.com>
Signed-off-by: Like Xu <likexu@tencent.com>
Message-Id: <20220111073823.21885-1-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Document the meaning of the three combinations of regs_avail and
regs_dirty. Update regs_dirty just after writeback instead of
doing it later after vmexit. After vmexit, instead, we clear the
regs_avail bits corresponding to lazily-loaded registers.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For Intel, the guest PMU can be disabled via clearing the PMU CPUID.
For AMD, all hw implementations support the base set of four
performance counters, with current mainstream hardware indicating
the presence of two additional counters via X86_FEATURE_PERFCTR_CORE.
In the virtualized world, the AMD guest driver may detect
the presence of at least one counter MSR. Most hypervisor
vendors would introduce a module param (like lbrv for svm)
to disable PMU for all guests.
Another control proposal per-VM is to pass PMU disable information
via MSR_IA32_PERF_CAPABILITIES or one bit in CPUID Fn4000_00[FF:00].
Both of methods require some guest-side changes, so a module
parameter may not be sufficiently granular, but practical enough.
Signed-off-by: Like Xu <likexu@tencent.com>
Message-Id: <20211117080304.38989-1-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This structure will replace vmcb_control_area in
svm_nested_state, providing only the fields that are actually
used by the nested state. This avoids having and copying around
uninitialized fields. The cost of this, however, is that all
functions (in this case vmcb_is_intercept) expect the old
structure, so they need to be duplicated.
In addition, in svm_get_nested_state() user space expects a
vmcb_control_area struct, so we need to copy back all fields
in a temporary structure before copying it to userspace.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20211103140527.752797-7-eesposit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Following the same naming convention of the previous patch,
rename nested_load_control_from_vmcb12.
In addition, inline copy_vmcb_control_area as it is only called
by this function.
__nested_copy_vmcb_control_to_cache() works with vmcb_control_area
parameters and it will be useful in next patches, when we use
local variables instead of svm cached state.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20211103140527.752797-4-eesposit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is useful in the next patch, to keep a saved copy
of vmcb12 registers and pass it around more easily.
Instead of blindly copying everything, we just copy EFER, CR0, CR3, CR4,
DR6 and DR7 which are needed by the VMRUN checks. If more fields will
need to be checked, it will be quite obvious to see that they must be added
in struct vmcb_save_area_cached and in nested_copy_vmcb_save_to_cache().
__nested_copy_vmcb_save_to_cache() takes a vmcb_save_area_cached
parameter, which is useful in order to save the state to a local
variable.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20211103140527.752797-3-eesposit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
VMs that mirror an encryption context rely on the owner to keep the
ASID allocated. Performing a KVM_CAP_VM_MOVE_ENC_CONTEXT_FROM
would cause a dangling ASID:
1. copy context from A to B (gets ref to A)
2. move context from A to L (moves ASID from A to L)
3. close L (releases ASID from L, B still references it)
The right way to do the handoff instead is to create a fresh mirror VM
on the destination first:
1. copy context from A to B (gets ref to A)
[later] 2. close B (releases ref to A)
3. move context from A to L (moves ASID from A to L)
4. copy context from L to M
So, catch the situation by adding a count of how many VMs are
mirroring this one's encryption context.
Fixes: 0b020f5af0 ("KVM: SEV: Add support for SEV-ES intra host migration")
Message-Id: <20211123005036.2954379-11-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Fixes for Xen emulation
* Kill kvm_map_gfn() / kvm_unmap_gfn() and broken gfn_to_pfn_cache
* Fixes for migration of 32-bit nested guests on 64-bit hypervisor
* Compilation fixes
* More SEV cleanups
WARN if the VM is tagged as SEV-ES but not SEV. KVM relies on SEV and
SEV-ES being set atomically, and guards common flows with "is SEV", i.e.
observing SEV-ES without SEV means KVM has a fatal bug.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211109215101.2211373-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add support for AMD SEV and SEV-ES intra-host migration support. Intra
host migration provides a low-cost mechanism for userspace VMM upgrades.
In the common case for intra host migration, we can rely on the normal
ioctls for passing data from one VMM to the next. SEV, SEV-ES, and other
confidential compute environments make most of this information opaque, and
render KVM ioctls such as "KVM_GET_REGS" irrelevant. As a result, we need
the ability to pass this opaque metadata from one VMM to the next. The
easiest way to do this is to leave this data in the kernel, and transfer
ownership of the metadata from one KVM VM (or vCPU) to the next. In-kernel
hand off makes it possible to move any data that would be
unsafe/impossible for the kernel to hand directly to userspace, and
cannot be reproduced using data that can be handed to userspace.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For SEV to work with intra host migration, contents of the SEV info struct
such as the ASID (used to index the encryption key in the AMD SP) and
the list of memory regions need to be transferred to the target VM.
This change adds a commands for a target VMM to get a source SEV VM's sev
info.
Signed-off-by: Peter Gonda <pgonda@google.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Marc Orr <marcorr@google.com>
Cc: Marc Orr <marcorr@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Wanpeng Li <wanpengli@tencent.com>
Cc: Jim Mattson <jmattson@google.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Message-Id: <20211021174303.385706-3-pgonda@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move SEV-ES vCPU metadata into new sev_es_state struct from vcpu_svm.
Signed-off-by: Peter Gonda <pgonda@google.com>
Suggested-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Cc: Marc Orr <marcorr@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Wanpeng Li <wanpengli@tencent.com>
Cc: Jim Mattson <jmattson@google.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Message-Id: <20211021174303.385706-2-pgonda@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* More progress on the protected VM front, now with the full
fixed feature set as well as the limitation of some hypercalls
after initialisation.
* Cleanup of the RAZ/WI sysreg handling, which was pointlessly
complicated
* Fixes for the vgic placement in the IPA space, together with a
bunch of selftests
* More memcg accounting of the memory allocated on behalf of a guest
* Timer and vgic selftests
* Workarounds for the Apple M1 broken vgic implementation
* KConfig cleanups
* New kvmarm.mode=none option, for those who really dislike us
RISC-V:
* New KVM port.
x86:
* New API to control TSC offset from userspace
* TSC scaling for nested hypervisors on SVM
* Switch masterclock protection from raw_spin_lock to seqcount
* Clean up function prototypes in the page fault code and avoid
repeated memslot lookups
* Convey the exit reason to userspace on emulation failure
* Configure time between NX page recovery iterations
* Expose Predictive Store Forwarding Disable CPUID leaf
* Allocate page tracking data structures lazily (if the i915
KVM-GT functionality is not compiled in)
* Cleanups, fixes and optimizations for the shadow MMU code
s390:
* SIGP Fixes
* initial preparations for lazy destroy of secure VMs
* storage key improvements/fixes
* Log the guest CPNC
Starting from this release, KVM-PPC patches will come from
Michael Ellerman's PPC tree.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmGBOiEUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNowwf/axlx3g9sgCwQHr12/6UF/7hL/RwP
9z+pGiUzjl2YQE+RjSvLqyd6zXh+h4dOdOKbZDLSkSTbcral/8U70ojKnQsXM0XM
1LoymxBTJqkgQBLm9LjYreEbzrPV4irk4ygEmuk3CPOHZu8xX1ei6c5LdandtM/n
XVUkXsQY+STkmnGv4P3GcPoDththCr0tBTWrFWtxa0w9hYOxx0ay1AZFlgM4FFX0
QFuRc8VBLoDJpIUjbkhsIRIbrlHc/YDGjuYnAU7lV/CIME8vf2BW6uBwIZJdYcDj
0ejozLjodEnuKXQGnc8sXFioLX2gbMyQJEvwCgRvUu/EU7ncFm1lfs7THQ==
=UxKM
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"ARM:
- More progress on the protected VM front, now with the full fixed
feature set as well as the limitation of some hypercalls after
initialisation.
- Cleanup of the RAZ/WI sysreg handling, which was pointlessly
complicated
- Fixes for the vgic placement in the IPA space, together with a
bunch of selftests
- More memcg accounting of the memory allocated on behalf of a guest
- Timer and vgic selftests
- Workarounds for the Apple M1 broken vgic implementation
- KConfig cleanups
- New kvmarm.mode=none option, for those who really dislike us
RISC-V:
- New KVM port.
x86:
- New API to control TSC offset from userspace
- TSC scaling for nested hypervisors on SVM
- Switch masterclock protection from raw_spin_lock to seqcount
- Clean up function prototypes in the page fault code and avoid
repeated memslot lookups
- Convey the exit reason to userspace on emulation failure
- Configure time between NX page recovery iterations
- Expose Predictive Store Forwarding Disable CPUID leaf
- Allocate page tracking data structures lazily (if the i915 KVM-GT
functionality is not compiled in)
- Cleanups, fixes and optimizations for the shadow MMU code
s390:
- SIGP Fixes
- initial preparations for lazy destroy of secure VMs
- storage key improvements/fixes
- Log the guest CPNC
Starting from this release, KVM-PPC patches will come from Michael
Ellerman's PPC tree"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (227 commits)
RISC-V: KVM: fix boolreturn.cocci warnings
RISC-V: KVM: remove unneeded semicolon
RISC-V: KVM: Fix GPA passed to __kvm_riscv_hfence_gvma_xyz() functions
RISC-V: KVM: Factor-out FP virtualization into separate sources
KVM: s390: add debug statement for diag 318 CPNC data
KVM: s390: pv: properly handle page flags for protected guests
KVM: s390: Fix handle_sske page fault handling
KVM: x86: SGX must obey the KVM_INTERNAL_ERROR_EMULATION protocol
KVM: x86: On emulation failure, convey the exit reason, etc. to userspace
KVM: x86: Get exit_reason as part of kvm_x86_ops.get_exit_info
KVM: x86: Clarify the kvm_run.emulation_failure structure layout
KVM: s390: Add a routine for setting userspace CPU state
KVM: s390: Simplify SIGP Set Arch handling
KVM: s390: pv: avoid stalls when making pages secure
KVM: s390: pv: avoid stalls for kvm_s390_pv_init_vm
KVM: s390: pv: avoid double free of sida page
KVM: s390: pv: add macros for UVC CC values
s390/mm: optimize reset_guest_reference_bit()
s390/mm: optimize set_guest_storage_key()
s390/mm: no need for pte_alloc_map_lock() if we know the pmd is present
...
- Improve retpoline code patching by separating it from alternatives which
reduces memory footprint and allows to do better optimizations in the
actual runtime patching.
- Add proper retpoline support for x86/BPF
- Address noinstr warnings in x86/kvm, lockdep and paravirtualization code
- Add support to handle pv_opsindirect calls in the noinstr analysis
- Classify symbols upfront and cache the result to avoid redundant
str*cmp() invocations.
- Add a CFI hash to reduce memory consumption which also reduces runtime
on a allyesconfig by ~50%
- Adjust XEN code to make objtool handling more robust and as a side
effect to prevent text fragmentation due to placement of the hypercall
page.
-----BEGIN PGP SIGNATURE-----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=pfZi
-----END PGP SIGNATURE-----
Merge tag 'objtool-core-2021-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Thomas Gleixner:
- Improve retpoline code patching by separating it from alternatives
which reduces memory footprint and allows to do better optimizations
in the actual runtime patching.
- Add proper retpoline support for x86/BPF
- Address noinstr warnings in x86/kvm, lockdep and paravirtualization
code
- Add support to handle pv_opsindirect calls in the noinstr analysis
- Classify symbols upfront and cache the result to avoid redundant
str*cmp() invocations.
- Add a CFI hash to reduce memory consumption which also reduces
runtime on a allyesconfig by ~50%
- Adjust XEN code to make objtool handling more robust and as a side
effect to prevent text fragmentation due to placement of the
hypercall page.
* tag 'objtool-core-2021-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits)
bpf,x86: Respect X86_FEATURE_RETPOLINE*
bpf,x86: Simplify computing label offsets
x86,bugs: Unconditionally allow spectre_v2=retpoline,amd
x86/alternative: Add debug prints to apply_retpolines()
x86/alternative: Try inline spectre_v2=retpoline,amd
x86/alternative: Handle Jcc __x86_indirect_thunk_\reg
x86/alternative: Implement .retpoline_sites support
x86/retpoline: Create a retpoline thunk array
x86/retpoline: Move the retpoline thunk declarations to nospec-branch.h
x86/asm: Fixup odd GEN-for-each-reg.h usage
x86/asm: Fix register order
x86/retpoline: Remove unused replacement symbols
objtool,x86: Replace alternatives with .retpoline_sites
objtool: Shrink struct instruction
objtool: Explicitly avoid self modifying code in .altinstr_replacement
objtool: Classify symbols
objtool: Support pv_opsindirect calls for noinstr
x86/xen: Rework the xen_{cpu,irq,mmu}_opsarrays
x86/xen: Mark xen_force_evtchn_callback() noinstr
x86/xen: Make irq_disable() noinstr
...
The size of the GHCB scratch area is limited to 16 KiB (GHCB_SCRATCH_AREA_LIMIT),
so there is no need for it to be a u64. This fixes a build error on 32-bit
systems:
i686-linux-gnu-ld: arch/x86/kvm/svm/sev.o: in function `sev_es_string_io:
sev.c:(.text+0x110f): undefined reference to `__udivdi3'
Cc: stable@vger.kernel.org
Fixes: 019057bd73 ("KVM: SEV-ES: fix length of string I/O")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This was tested by booting a nested guest with TSC=1Ghz,
observing the clocks, and doing about 100 cycles of migration.
Note that qemu patch is needed to support migration because
of a new MSR that needs to be placed in the migration state.
The patch will be sent to the qemu mailing list soon.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210914154825.104886-14-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move RESET emulation for SVM vCPUs to svm_vcpu_reset(), and drop an extra
init_vmcb() from svm_create_vcpu() in the process. Hopefully KVM will
someday expose a dedicated RESET ioctl(), and in the meantime separating
"create" from "RESET" is a nice cleanup.
Keep the call to svm_switch_vmcb() so that misuse of svm->vmcb at worst
breaks the guest, e.g. premature accesses doesn't cause a NULL pointer
dereference.
Cc: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210921000303.400537-10-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently the KVM_REQ_GET_NESTED_STATE_PAGES on SVM only reloads PDPTRs,
and MSR bitmap, with former not really needed for SMM as SMM exit code
reloads them again from SMRAM'S CR3, and later happens to work
since MSR bitmap isn't modified while in SMM.
Still it is better to be consistient with VMX.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210913140954.165665-5-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
APIC base relocation is not supported anyway and won't work
correctly so just drop the code that handles it and keep AVIC
MMIO bar at the default APIC base.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210810205251.424103-17-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that kvm_request_apicv_update doesn't need to drop the kvm->srcu lock,
we can call kvm_request_apicv_update directly.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210810205251.424103-13-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Thanks to the former patches, it is now possible to keep the APICv
memslot always enabled, and it will be invisible to the guest
when it is inhibited
This code is based on a suggestion from Sean Christopherson:
https://lkml.org/lkml/2021/7/19/2970
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210810205251.424103-9-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make svm_copy_vmrun_state()/svm_copy_vmloadsave_state() interface match
'memcpy(dest, src)' to avoid any confusion.
No functional change intended.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210719090322.625277-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To match svm_copy_vmrun_state(), rename nested_svm_vmloadsave() to
svm_copy_vmloadsave_state().
Opportunistically add missing braces to 'else' branch in
vmload_vmsave_interception().
No functional change intended.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210716144104.465269-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If the VM was migrated while in SMM, no nested state was saved/restored,
and therefore svm_leave_smm has to load both save and control area
of the vmcb12. Save area is already loaded from HSAVE area,
so now load the control area as well from the vmcb12.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210628104425.391276-6-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Separate the code setting non-VMLOAD-VMSAVE state from
svm_set_nested_state() into its own function. This is going to be
re-used from svm_enter_smm()/svm_leave_smm().
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210628104425.391276-4-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In theory there are no side effects of not intercepting #SMI,
because then #SMI becomes transparent to the OS and the KVM.
Plus an observation on recent Zen2 CPUs reveals that these
CPUs ignore #SMI interception and never deliver #SMI VMexits.
This is also useful to test nested KVM to see that L1
handles #SMIs correctly in case when L1 doesn't intercept #SMI.
Finally the default remains the same, the SMI are intercepted
by default thus this patch doesn't have any effect unless
non default module param value is used.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210707125100.677203-4-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Enlightened MSR-Bitmap as per TLFS:
"The L1 hypervisor may collaborate with the L0 hypervisor to make MSR
accesses more efficient. It can enable enlightened MSR bitmaps by setting
the corresponding field in the enlightened VMCS to 1. When enabled, L0
hypervisor does not monitor the MSR bitmaps for changes. Instead, the L1
hypervisor must invalidate the corresponding clean field after making
changes to one of the MSR bitmaps."
Enable this for SVM.
Related VMX changes:
commit ceef7d10df ("KVM: x86: VMX: hyper-v: Enlightened MSR-Bitmap support")
Signed-off-by: Vineeth Pillai <viremana@linux.microsoft.com>
Message-Id: <87df0710f95d28b91cc4ea014fc4d71056eebbee.1622730232.git.viremana@linux.microsoft.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SVM added support for certain reserved fields to be used by
software or hypervisor. Add the following reserved fields:
- VMCB offset 0x3e0 - 0x3ff
- Clean bit 31
- SVM intercept exit code 0xf0000000
Later patches will make use of this for supporting Hyper-V
nested virtualization enhancements.
Signed-off-by: Vineeth Pillai <viremana@linux.microsoft.com>
Message-Id: <a1f17a43a8e9e751a1a9cc0281649d71bdbf721b.1622730232.git.viremana@linux.microsoft.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Unify VMX and SVM code by moving APICv/AVIC enablement tracking to common
'enable_apicv' variable. Note: unlike APICv, AVIC is disabled by default.
No functional change intended.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210609150911.1471882-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make it consistent with kvm_intel.enable_apicv.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Reorganize SEV code to streamline and simplify future development
-----BEGIN PGP SIGNATURE-----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=ENfF
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v5.13_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
"The three SEV commits are not really urgent material. But we figured
since getting them in now will avoid a huge amount of conflicts
between future SEV changes touching tip, the kvm and probably other
trees, sending them to you now would be best.
The idea is that the tip, kvm etc branches for 5.14 will all base
ontop of -rc2 and thus everything will be peachy. What is more, those
changes are purely mechanical and defines movement so they should be
fine to go now (famous last words).
Summary:
- Enable -Wundef for the compressed kernel build stage
- Reorganize SEV code to streamline and simplify future development"
* tag 'x86_urgent_for_v5.13_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot/compressed: Enable -Wundef
x86/msr: Rename MSR_K8_SYSCFG to MSR_AMD64_SYSCFG
x86/sev: Move GHCB MSR protocol and NAE definitions in a common header
x86/sev-es: Rename sev-es.{ch} to sev.{ch}
The guest and the hypervisor contain separate macros to get and set
the GHCB MSR protocol and NAE event fields. Consolidate the GHCB
protocol definitions and helper macros in one place.
Leave the supported protocol version define in separate files to keep
the guest and hypervisor flexibility to support different GHCB version
in the same release.
There is no functional change intended.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Joerg Roedel <jroedel@suse.de>
Link: https://lkml.kernel.org/r/20210427111636.1207-3-brijesh.singh@amd.com
When an SEV-ES guest is running, the GHCB is unmapped as part of the
vCPU run support. However, kvm_vcpu_unmap() triggers an RCU dereference
warning with CONFIG_PROVE_LOCKING=y because the SRCU lock is released
before invoking the vCPU run support.
Move the GHCB unmapping into the prepare_guest_switch callback, which is
invoked while still holding the SRCU lock, eliminating the RCU dereference
warning.
Fixes: 291bd20d5d ("KVM: SVM: Add initial support for a VMGEXIT VMEXIT")
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <b2f9b79d15166f2c3e4375c0d9bc3268b7696455.1620332081.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace calls to svm_sev_enabled() with direct checks on sev_enabled, or
in the case of svm_mem_enc_op, simply drop the call to svm_sev_enabled().
This effectively replaces checks against a valid max_sev_asid with checks
against sev_enabled. sev_enabled is forced off by sev_hardware_setup()
if max_sev_asid is invalid, all call sites are guaranteed to run after
sev_hardware_setup(), and all of the checks care about SEV being fully
enabled (as opposed to intentionally handling the scenario where
max_sev_asid is valid but SEV enabling fails due to OOM).
Reviewed by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210422021125.3417167-14-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the allocation of the SEV VMCB array to sev.c to help pave the way
toward encapsulating SEV enabling wholly within sev.c.
No functional change intended.
Reviewed by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210422021125.3417167-13-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a reverse-CPUID entry for the memory encryption word, 0x8000001F.EAX,
and use it to override the supported CPUID flags reported to userspace.
Masking the reported CPUID flags avoids over-reporting KVM support, e.g.
without the mask a SEV-SNP capable CPU may incorrectly advertise SNP
support to userspace.
Clear SEV/SEV-ES if their corresponding module parameters are disabled,
and clear the memory encryption leaf completely if SEV is not fully
supported in KVM. Advertise SME_COHERENT in addition to SEV and SEV-ES,
as the guest can use SME_COHERENT to avoid CLFLUSH operations.
Explicitly omit SME and VM_PAGE_FLUSH from the reporting. These features
are used by KVM, but are not exposed to the guest, e.g. guest access to
related MSRs will fault.
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210422021125.3417167-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Unconditionally invoke sev_hardware_setup() when configuring SVM and
handle clearing the module params/variable 'sev' and 'sev_es' in
sev_hardware_setup(). This allows making said variables static within
sev.c and reduces the odds of a collision with guest code, e.g. the guest
side of things has already laid claim to 'sev_enabled'.
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210422021125.3417167-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use KVM's "user return MSRs" framework to defer restoring the host's
MSR_TSC_AUX until the CPU returns to userspace. Add/improve comments to
clarify why MSR_TSC_AUX is intercepted on both RDMSR and WRMSR, and why
it's safe for KVM to keep the guest's value loaded even if KVM is
scheduled out.
Cc: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210423223404.3860547-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a capability for userspace to mirror SEV encryption context from
one vm to another. On our side, this is intended to support a
Migration Helper vCPU, but it can also be used generically to support
other in-guest workloads scheduled by the host. The intention is for
the primary guest and the mirror to have nearly identical memslots.
The primary benefits of this are that:
1) The VMs do not share KVM contexts (think APIC/MSRs/etc), so they
can't accidentally clobber each other.
2) The VMs can have different memory-views, which is necessary for post-copy
migration (the migration vCPUs on the target need to read and write to
pages, when the primary guest would VMEXIT).
This does not change the threat model for AMD SEV. Any memory involved
is still owned by the primary guest and its initial state is still
attested to through the normal SEV_LAUNCH_* flows. If userspace wanted
to circumvent SEV, they could achieve the same effect by simply attaching
a vCPU to the primary VM.
This patch deliberately leaves userspace in charge of the memslots for the
mirror, as it already has the power to mess with them in the primary guest.
This patch does not support SEV-ES (much less SNP), as it does not
handle handing off attested VMSAs to the mirror.
For additional context, we need a Migration Helper because SEV PSP
migration is far too slow for our live migration on its own. Using
an in-guest migrator lets us speed this up significantly.
Signed-off-by: Nathan Tempelman <natet@google.com>
Message-Id: <20210408223214.2582277-1-natet@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Define the actual size of the IOPM and MSRPM tables so that the actual size
can be used when initializing them and when checking the consistency of their
physical address.
These #defines are placed in svm.h so that they can be shared.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Message-Id: <20210412215611.110095-2-krish.sadhukhan@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a comment above the declaration of vcpu_svm.vmcb to call out that it
is simply a shorthand for current_vmcb->ptr. The myriad accesses to
svm->vmcb are quite confusing without this crucial detail.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210406171811.4043363-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove vmcb_pa from vcpu_svm and simply read current_vmcb->pa directly in
the one path where it is consumed. Unlike svm->vmcb, use of the current
vmcb's address is very limited, as evidenced by the fact that its use
can be trimmed to a single dereference.
Opportunistically add a comment about using vmcb01 for VMLOAD/VMSAVE, at
first glance using vmcb01 instead of vmcb_pa looks wrong.
No functional change intended.
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210406171811.4043363-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently to support Intel->AMD migration, if CPU vendor is GenuineIntel,
we emulate the full 64 value for MSR_IA32_SYSENTER_{EIP|ESP}
msrs, and we also emulate the sysenter/sysexit instruction in long mode.
(Emulator does still refuse to emulate sysenter in 64 bit mode, on the
ground that the code for that wasn't tested and likely has no users)
However when virtual vmload/vmsave is enabled, the vmload instruction will
update these 32 bit msrs without triggering their msr intercept,
which will lead to having stale values in kvm's shadow copy of these msrs,
which relies on the intercept to be up to date.
Fix/optimize this by doing the following:
1. Enable the MSR intercepts for SYSENTER MSRs iff vendor=GenuineIntel
(This is both a tiny optimization and also ensures that in case
the guest cpu vendor is AMD, the msrs will be 32 bit wide as
AMD defined).
2. Store only high 32 bit part of these msrs on interception and combine
it with hardware msr value on intercepted read/writes
iff vendor=GenuineIntel.
3. Disable vmload/vmsave virtualization if vendor=GenuineIntel.
(It is somewhat insane to set vendor=GenuineIntel and still enable
SVM for the guest but well whatever).
Then zero the high 32 bit parts when kvm intercepts and emulates vmload.
Thanks a lot to Paulo Bonzini for helping me with fixing this in the most
correct way.
This patch fixes nested migration of 32 bit nested guests, that was
broken because incorrect cached values of SYSENTER msrs were stored in
the migration stream if L1 changed these msrs with
vmload prior to L2 entry.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210401111928.996871-3-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Secure Encrypted Virtualization (SEV) and Secure Encrypted
Virtualization - Encrypted State (SEV-ES) ASIDs are used to encrypt KVMs
on AMD platform. These ASIDs are available in the limited quantities on
a host.
Register their capacity and usage to the misc controller for tracking
via cgroups.
Signed-off-by: Vipin Sharma <vipinsh@google.com>
Reviewed-by: David Rientjes <rientjes@google.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Use the vmcb12 control clean field to determine which vmcb12.save
registers were marked dirty in order to minimize register copies
when switching from L1 to L2. Those vmcb12 registers marked as dirty need
to be copied to L0's vmcb02 as they will be used to update the vmcb
state cache for the L2 VMRUN. In the case where we have a different
vmcb12 from the last L2 VMRUN all vmcb12.save registers must be
copied over to L2.save.
Tested:
kvm-unit-tests
kvm selftests
Fedora L1 L2
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Cathy Avery <cavery@redhat.com>
Message-Id: <20210301200844.2000-1-cavery@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a helper to consolidate boilerplate for nested VM-Exits that don't
provide any data in exit_info_*.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210302174515.2812275-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Refactor the svm_exit_handlers API to pass @vcpu instead of @svm to
allow directly invoking common x86 exit handlers (in a future patch).
Opportunistically convert an absurd number of instances of 'svm->vcpu'
to direct uses of 'vcpu' to avoid pointless casting.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210205005750.3841462-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that SVM is using a separate vmcb01 and vmcb02 (and also uses the vmcb12
naming) we can give clearer names to functions that write to and read
from those VMCBs. Likewise, variables and parameters can be renamed
from nested_vmcb to vmcb12.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch moves the asid_generation from the vcpu to the vmcb
in order to track the ASID generation that was active the last
time the vmcb was run. If sd->asid_generation changes between
two runs, the old ASID is invalid and must be changed.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Cathy Avery <cavery@redhat.com>
Message-Id: <20210112164313.4204-3-cavery@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch moves the physical cpu tracking from the vcpu
to the vmcb in svm_switch_vmcb. If either vmcb01 or vmcb02
change physical cpus from one vmrun to the next the vmcb's
previous cpu is preserved for comparison with the current
cpu and the vmcb is marked dirty if different. This prevents
the processor from using old cached data for a vmcb that may
have been updated on a prior run on a different processor.
It also moves the physical cpu check from svm_vcpu_load
to pre_svm_run as the check only needs to be done at run.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Cathy Avery <cavery@redhat.com>
Message-Id: <20210112164313.4204-2-cavery@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
svm->vmcb will now point to a separate vmcb for L1 (not nested) or L2
(nested).
The main advantages are removing get_host_vmcb and hsave, in favor of
concepts that are shared with VMX.
We don't need anymore to stash the L1 registers in hsave while L2
runs, but we need to copy the VMLOAD/VMSAVE registers from VMCB01 to
VMCB02 and back. This more or less has the same cost, but code-wise
nested_svm_vmloadsave can be reused.
This patch omits several optimizations that are possible:
- for simplicity there is some wholesale copying of vmcb.control areas
which can go away.
- we should be able to better use the VMCB01 and VMCB02 clean bits.
- another possibility is to always use VMCB01 for VMLOAD and VMSAVE,
thus avoiding the copy of VMLOAD/VMSAVE registers from VMCB01 to
VMCB02 and back.
Tested:
kvm-unit-tests
kvm self tests
Loaded fedora nested guest on fedora
Signed-off-by: Cathy Avery <cavery@redhat.com>
Message-Id: <20201011184818.3609-3-cavery@redhat.com>
[Fix conflicts; keep VMCB02 G_PAT up to date whenever guest writes the
PAT MSR; do not copy CR4 over from VMCB01 as it is not needed anymore; add
a few more comments. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently we save host state like user-visible host MSRs, and do some
initial guest register setup for MSR_TSC_AUX and MSR_AMD64_TSC_RATIO
in svm_vcpu_load(). Defer this until just before we enter the guest by
moving the handling to kvm_x86_ops.prepare_guest_switch() similarly to
how it is done for the VMX implementation.
Additionally, since handling of saving/restoring host user MSRs is the
same both with/without SEV-ES enabled, move that handling to common
code.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Message-Id: <20210202190126.2185715-4-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that the set of host user MSRs that need to be individually
saved/restored are the same with/without SEV-ES, we can drop the
.sev_es_restored flag and just iterate through the list unconditionally
for both cases. A subsequent patch can then move these loops to a
common path.
Signed-off-by: Michael Roth <michael.roth@amd.com>
Message-Id: <20210202190126.2185715-3-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Using a guest workload which simply issues 'hlt' in a tight loop to
generate VMEXITs, it was observed (on a recent EPYC processor) that a
significant amount of the VMEXIT overhead measured on the host was the
result of MSR reads/writes in svm_vcpu_load/svm_vcpu_put according to
perf:
67.49%--kvm_arch_vcpu_ioctl_run
|
|--23.13%--vcpu_put
| kvm_arch_vcpu_put
| |
| |--21.31%--native_write_msr
| |
| --1.27%--svm_set_cr4
|
|--16.11%--vcpu_load
| |
| --15.58%--kvm_arch_vcpu_load
| |
| |--13.97%--svm_set_cr4
| | |
| | |--12.64%--native_read_msr
Most of these MSRs relate to 'syscall'/'sysenter' and segment bases, and
can be saved/restored using 'vmsave'/'vmload' instructions rather than
explicit MSR reads/writes. In doing so there is a significant reduction
in the svm_vcpu_load/svm_vcpu_put overhead measured for the above
workload:
50.92%--kvm_arch_vcpu_ioctl_run
|
|--19.28%--disable_nmi_singlestep
|
|--13.68%--vcpu_load
| kvm_arch_vcpu_load
| |
| |--9.19%--svm_set_cr4
| | |
| | --6.44%--native_read_msr
| |
| --3.55%--native_write_msr
|
|--6.05%--kvm_inject_nmi
|--2.80%--kvm_sev_es_mmio_read
|--2.19%--vcpu_put
| |
| --1.25%--kvm_arch_vcpu_put
| native_write_msr
Quantifying this further, if we look at the raw cycle counts for a
normal iteration of the above workload (according to 'rdtscp'),
kvm_arch_vcpu_ioctl_run() takes ~4600 cycles from start to finish with
the current behavior. Using 'vmsave'/'vmload', this is reduced to
~2800 cycles, a savings of 39%.
While this approach doesn't seem to manifest in any noticeable
improvement for more realistic workloads like UnixBench, netperf, and
kernel builds, likely due to their exit paths generally involving IO
with comparatively high latencies, it does improve overall overhead
of KVM_RUN significantly, which may still be noticeable for certain
situations. It also simplifies some aspects of the code.
With this change, explicit save/restore is no longer needed for the
following host MSRs, since they are documented[1] as being part of the
VMCB State Save Area:
MSR_STAR, MSR_LSTAR, MSR_CSTAR,
MSR_SYSCALL_MASK, MSR_KERNEL_GS_BASE,
MSR_IA32_SYSENTER_CS,
MSR_IA32_SYSENTER_ESP,
MSR_IA32_SYSENTER_EIP,
MSR_FS_BASE, MSR_GS_BASE
and only the following MSR needs individual handling in
svm_vcpu_put/svm_vcpu_load:
MSR_TSC_AUX
We could drop the host_save_user_msrs array/loop and instead handle
MSR read/write of MSR_TSC_AUX directly, but we leave that for now as
a potential follow-up.
Since 'vmsave'/'vmload' also handles the LDTR and FS/GS segment
registers (and associated hidden state)[2], some of the code
previously used to handle this is no longer needed, so we drop it
as well.
The first public release of the SVM spec[3] also documents the same
handling for the host state in question, so we make these changes
unconditionally.
Also worth noting is that we 'vmsave' to the same page that is
subsequently used by 'vmrun' to record some host additional state. This
is okay, since, in accordance with the spec[2], the additional state
written to the page by 'vmrun' does not overwrite any fields written by
'vmsave'. This has also been confirmed through testing (for the above
CPU, at least).
[1] AMD64 Architecture Programmer's Manual, Rev 3.33, Volume 2, Appendix B, Table B-2
[2] AMD64 Architecture Programmer's Manual, Rev 3.31, Volume 3, Chapter 4, VMSAVE/VMLOAD
[3] Secure Virtual Machine Architecture Reference Manual, Rev 3.01
Suggested-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Message-Id: <20210202190126.2185715-2-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If not in long mode, the low bits of CR3 are reserved but not enforced to
be zero, so remove those checks. If in long mode, however, the MBZ bits
extend down to the highest physical address bit of the guest, excluding
the encryption bit.
Make the checks consistent with the above, and match them between
nested_vmcb_checks and KVM_SET_SREGS.
Cc: stable@vger.kernel.org
Fixes: 761e416934 ("KVM: nSVM: Check that MBZ bits in CR3 and CR4 are not set on vmrun of nested guests")
Fixes: a780a3ea62 ("KVM: X86: Fix reserved bits check for MOV to CR3")
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Typically under KVM, an AP is booted using the INIT-SIPI-SIPI sequence,
where the guest vCPU register state is updated and then the vCPU is VMRUN
to begin execution of the AP. For an SEV-ES guest, this won't work because
the guest register state is encrypted.
Following the GHCB specification, the hypervisor must not alter the guest
register state, so KVM must track an AP/vCPU boot. Should the guest want
to park the AP, it must use the AP Reset Hold exit event in place of, for
example, a HLT loop.
First AP boot (first INIT-SIPI-SIPI sequence):
Execute the AP (vCPU) as it was initialized and measured by the SEV-ES
support. It is up to the guest to transfer control of the AP to the
proper location.
Subsequent AP boot:
KVM will expect to receive an AP Reset Hold exit event indicating that
the vCPU is being parked and will require an INIT-SIPI-SIPI sequence to
awaken it. When the AP Reset Hold exit event is received, KVM will place
the vCPU into a simulated HLT mode. Upon receiving the INIT-SIPI-SIPI
sequence, KVM will make the vCPU runnable. It is again up to the guest
to then transfer control of the AP to the proper location.
To differentiate between an actual HLT and an AP Reset Hold, a new MP
state is introduced, KVM_MP_STATE_AP_RESET_HOLD, which the vCPU is
placed in upon receiving the AP Reset Hold exit event. Additionally, to
communicate the AP Reset Hold exit event up to userspace (if needed), a
new exit reason is introduced, KVM_EXIT_AP_RESET_HOLD.
A new x86 ops function is introduced, vcpu_deliver_sipi_vector, in order
to accomplish AP booting. For VMX, vcpu_deliver_sipi_vector is set to the
original SIPI delivery function, kvm_vcpu_deliver_sipi_vector(). SVM adds
a new function that, for non SEV-ES guests, invokes the original SIPI
delivery function, kvm_vcpu_deliver_sipi_vector(), but for SEV-ES guests,
implements the logic above.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <e8fbebe8eb161ceaabdad7c01a5859a78b424d5e.1609791600.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The GHCB specification requires the hypervisor to save the address of an
AP Jump Table so that, for example, vCPUs that have been parked by UEFI
can be started by the OS. Provide support for the AP Jump Table set/get
exit code.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The run sequence is different for an SEV-ES guest compared to a legacy or
even an SEV guest. The guest vCPU register state of an SEV-ES guest will
be restored on VMRUN and saved on VMEXIT. There is no need to restore the
guest registers directly and through VMLOAD before VMRUN and no need to
save the guest registers directly and through VMSAVE on VMEXIT.
Update the svm_vcpu_run() function to skip register state saving and
restoring and provide an alternative function for running an SEV-ES guest
in vmenter.S
Additionally, certain host state is restored across an SEV-ES VMRUN. As
a result certain register states are not required to be restored upon
VMEXIT (e.g. FS, GS, etc.), so only do that if the guest is not an SEV-ES
guest.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <fb1c66d32f2194e171b95fc1a8affd6d326e10c1.1607620209.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
An SEV-ES vCPU requires additional VMCB vCPU load/put requirements. SEV-ES
hardware will restore certain registers on VMEXIT, but not save them on
VMRUN (see Table B-3 and Table B-4 of the AMD64 APM Volume 2), so make the
following changes:
General vCPU load changes:
- During vCPU loading, perform a VMSAVE to the per-CPU SVM save area and
save the current values of XCR0, XSS and PKRU to the per-CPU SVM save
area as these registers will be restored on VMEXIT.
General vCPU put changes:
- Do not attempt to restore registers that SEV-ES hardware has already
restored on VMEXIT.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <019390e9cb5e93cd73014fa5a040c17d42588733.1607620209.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
An SEV-ES vCPU requires additional VMCB initialization requirements for
vCPU creation and vCPU load/put requirements. This includes:
General VMCB initialization changes:
- Set a VMCB control bit to enable SEV-ES support on the vCPU.
- Set the VMCB encrypted VM save area address.
- CRx registers are part of the encrypted register state and cannot be
updated. Remove the CRx register read and write intercepts and replace
them with CRx register write traps to track the CRx register values.
- Certain MSR values are part of the encrypted register state and cannot
be updated. Remove certain MSR intercepts (EFER, CR_PAT, etc.).
- Remove the #GP intercept (no support for "enable_vmware_backdoor").
- Remove the XSETBV intercept since the hypervisor cannot modify XCR0.
General vCPU creation changes:
- Set the initial GHCB gpa value as per the GHCB specification.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <3a8aef366416eddd5556dfa3fdc212aafa1ad0a2.1607620209.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The SVM host save area is used to restore some host state on VMEXIT of an
SEV-ES guest. After allocating the save area, clear it and add the
encryption mask to the SVM host save area physical address that is
programmed into the VM_HSAVE_PA MSR.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <b77aa28af6d7f1a0cb545959e08d6dc75e0c3cba.1607620209.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For an SEV-ES guest, string-based port IO is performed to a shared
(un-encrypted) page so that both the hypervisor and guest can read or
write to it and each see the contents.
For string-based port IO operations, invoke SEV-ES specific routines that
can complete the operation using common KVM port IO support.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <9d61daf0ffda496703717218f415cdc8fd487100.1607620209.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For an SEV-ES guest, MMIO is performed to a shared (un-encrypted) page
so that both the hypervisor and guest can read or write to it and each
see the contents.
The GHCB specification provides software-defined VMGEXIT exit codes to
indicate a request for an MMIO read or an MMIO write. Add support to
recognize the MMIO requests and invoke SEV-ES specific routines that
can complete the MMIO operation. These routines use common KVM support
to complete the MMIO operation.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <af8de55127d5bcc3253d9b6084a0144c12307d4d.1607620209.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The GHCB specification defines a GHCB MSR protocol using the lower
12-bits of the GHCB MSR (in the hypervisor this corresponds to the
GHCB GPA field in the VMCB).
Function 0x100 is a request for termination of the guest. The guest has
encountered some situation for which it has requested to be terminated.
The GHCB MSR value contains the reason for the request.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <f3a1f7850c75b6ea4101e15bbb4a3af1a203f1dc.1607620209.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The GHCB specification defines a GHCB MSR protocol using the lower
12-bits of the GHCB MSR (in the hypervisor this corresponds to the
GHCB GPA field in the VMCB).
Function 0x004 is a request for CPUID information. Only a single CPUID
result register can be sent per invocation, so the protocol defines the
register that is requested. The GHCB MSR value is set to the CPUID
register value as per the specification via the VMCB GHCB GPA field.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <fd7ee347d3936e484c06e9001e340bf6387092cd.1607620209.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The GHCB specification defines a GHCB MSR protocol using the lower
12-bits of the GHCB MSR (in the hypervisor this corresponds to the
GHCB GPA field in the VMCB).
Function 0x002 is a request to set the GHCB MSR value to the SEV INFO as
per the specification via the VMCB GHCB GPA field.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <c23c163a505290a0d1b9efc4659b838c8c902cbc.1607620209.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SEV-ES adds a new VMEXIT reason code, VMGEXIT. Initial support for a
VMGEXIT includes mapping the GHCB based on the guest GPA, which is
obtained from a new VMCB field, and then validating the required inputs
for the VMGEXIT exit reason.
Since many of the VMGEXIT exit reasons correspond to existing VMEXIT
reasons, the information from the GHCB is copied into the VMCB control
exit code areas and KVM register areas. The standard exit handlers are
invoked, similar to standard VMEXIT processing. Before restarting the
vCPU, the GHCB is updated with any registers that have been updated by
the hypervisor.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <c6a4ed4294a369bd75c44d03bd7ce0f0c3840e50.1607620209.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since the guest register state of an SEV-ES guest is encrypted, debugging
is not supported. Update the code to prevent guest debugging when the
guest has protected state.
Additionally, an SEV-ES guest must only and always intercept DR7 reads and
writes. Update set_dr_intercepts() and clr_dr_intercepts() to account for
this.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <8db966fa2f9803d6454ce773863025d0e2e7f3cc.1607620209.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allocate a page during vCPU creation to be used as the encrypted VM save
area (VMSA) for the SEV-ES guest. Provide a flag in the kvm_vcpu_arch
structure that indicates whether the guest state is protected.
When freeing a VMSA page that has been encrypted, the cache contents must
be flushed using the MSR_AMD64_VM_PAGE_FLUSH before freeing the page.
[ i386 build warnings ]
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <fde272b17eec804f3b9db18c131262fe074015c5.1607620209.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add support to KVM for determining if a system is capable of supporting
SEV-ES as well as determining if a guest is an SEV-ES guest.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <e66792323982c822350e40c7a1cf67ea2978a70b.1607620209.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM does not have separate ASIDs for L1 and L2; either the nested
hypervisor and nested guests share a single ASID, or on older processor
the ASID is used only to implement TLB flushing.
Either way, ASIDs are handled at the VM level. In preparation
for having different VMCBs passed to VMLOAD/VMRUN/VMSAVE for L1 and
L2, store the current ASID to struct vcpu_svm and only move it to
the VMCB in svm_vcpu_run. This way, TLB flushes can be applied
no matter which VMCB will be active during the next svm_vcpu_run.
Signed-off-by: Cathy Avery <cavery@redhat.com>
Message-Id: <20201011184818.3609-2-cavery@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Split out VMX's checks on CR4.VMXE to a dedicated hook, .is_valid_cr4(),
and invoke the new hook from kvm_valid_cr4(). This fixes an issue where
KVM_SET_SREGS would return success while failing to actually set CR4.
Fixing the issue by explicitly checking kvm_x86_ops.set_cr4()'s return
in __set_sregs() is not a viable option as KVM has already stuffed a
variety of vCPU state.
Note, kvm_valid_cr4() and is_valid_cr4() have different return types and
inverted semantics. This will be remedied in a future patch.
Fixes: 5e1746d620 ("KVM: nVMX: Allow setting the VMXE bit in CR4")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20201007014417.29276-5-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This way we don't waste memory on VMs which don't use nesting
virtualization even when the host enabled it for them.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20201001112954.6258-5-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This will be used to signal an error to the userspace, in case
the vendor code failed during handling of this msr. (e.g -ENOMEM)
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20201001112954.6258-4-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We will introduce the concept of MSRs that may not be handled in kernel
space soon. Some MSRs are directly passed through to the guest, effectively
making them handled by KVM from user space's point of view.
This patch introduces all logic required to ensure that MSRs that
user space wants trapped are not marked as direct access for guests.
Signed-off-by: Alexander Graf <graf@amazon.com>
Message-Id: <20200925143422.21718-6-graf@amazon.com>
[Make terminology a bit more similar to VMX. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 761e416934 created a wrong mask for the
CR3 MBZ bits. According to APM vol 2, only the upper 12 bits are MBZ.
Fixes: 761e416934 ("KVM: nSVM: Check that MBZ bits in CR3 and CR4 are not set on vmrun of nested guests", 2020-07-08)
Signed-off-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Message-Id: <20200829004824.4577-2-krish.sadhukhan@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert all the intercepts to one array of 32 bit vectors in
vmcb_control_area. This makes it easy for future intercept vector
additions. Also update trace functions.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <159985250813.11252.5736581193881040525.stgit@bmoger-ubuntu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Modify intercept_exceptions to generic intercepts in vmcb_control_area. Use
the generic vmcb_set_intercept, vmcb_clr_intercept and vmcb_is_intercept to
set/clear/test the intercept_exceptions bits.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <159985250037.11252.1361972528657052410.stgit@bmoger-ubuntu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Modify intercept_dr to generic intercepts in vmcb_control_area. Use
the generic vmcb_set_intercept, vmcb_clr_intercept and vmcb_is_intercept
to set/clear/test the intercept_dr bits.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <159985249255.11252.10000868032136333355.stgit@bmoger-ubuntu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Change intercept_cr to generic intercepts in vmcb_control_area.
Use the new vmcb_set_intercept, vmcb_clr_intercept and vmcb_is_intercept
where applicable.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <159985248506.11252.9081085950784508671.stgit@bmoger-ubuntu>
[Change constant names. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is in preparation for the future intercept vector additions.
Add new functions vmcb_set_intercept, vmcb_clr_intercept and vmcb_is_intercept
using kernel APIs __set_bit, __clear_bit and test_bit espectively.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <159985247876.11252.16039238014239824460.stgit@bmoger-ubuntu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
host_intercept_exceptions is not used anywhere. Clean it up.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <159985252277.11252.8819848322175521354.stgit@bmoger-ubuntu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is to be more consistient with VMX, and to support
upcoming addition of vmcb02
Hopefully no functional changes.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20200827171145.374620-3-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
