mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
synced 2025-09-07 14:19:35 +00:00
loongarch-next
887 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Sean Christopherson
|
6b3dcabc10 |
KVM: x86/mmu: Subsume kvm_mmu_unprotect_page() into the and_retry() version
Fold kvm_mmu_unprotect_page() into kvm_mmu_unprotect_gfn_and_retry() now that all other direct usage is gone. No functional change intended. Link: https://lore.kernel.org/r/20240831001538.336683-21-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
||
|
Sean Christopherson
|
4df685664b |
KVM: x86: Update retry protection fields when forcing retry on emulation failure
When retrying the faulting instruction after emulation failure, refresh the infinite loop protection fields even if no shadow pages were zapped, i.e. avoid hitting an infinite loop even when retrying the instruction as a last-ditch effort to avoid terminating the guest. Link: https://lore.kernel.org/r/20240831001538.336683-19-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
||
|
Sean Christopherson
|
b299c273c0 |
KVM: x86/mmu: Move event re-injection unprotect+retry into common path
Move the event re-injection unprotect+retry logic into
kvm_mmu_write_protect_fault(), i.e. unprotect and retry if and only if
the #PF actually hit a write-protected gfn. Note, there is a small
possibility that the gfn was unprotected by a different tasking between
hitting the #PF and acquiring mmu_lock, but in that case, KVM will resume
the guest immediately anyways because KVM will treat the fault as spurious.
As a bonus, unprotecting _after_ handling the page fault also addresses the
case where the installing a SPTE to handle fault encounters a shadowed PTE,
i.e. *creates* a read-only SPTE.
Opportunstically add a comment explaining what on earth the intent of the
code is, as based on the changelog from commit
|
||
|
Sean Christopherson
|
29e495bdf8 |
KVM: x86/mmu: Always walk guest PTEs with WRITE access when unprotecting
When getting a gpa from a gva to unprotect the associated gfn when an event is awating reinjection, walk the guest PTEs for WRITE as there's no point in unprotecting the gfn if the guest is unable to write the page, i.e. if write-protection can't trigger emulation. Note, the entire flow should be guarded on the access being a write, and even better should be conditioned on actually triggering a write-protect fault. This will be addressed in a future commit. Reviewed-by: Yuan Yao <yuan.yao@intel.com> Link: https://lore.kernel.org/r/20240831001538.336683-14-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
||
|
Sean Christopherson
|
b7e948898e |
KVM: x86/mmu: Don't try to unprotect an INVALID_GPA
If getting the gpa for a gva fails, e.g. because the gva isn't mapped in the guest page tables, don't try to unprotect the invalid gfn. This is mostly a performance fix (avoids unnecessarily taking mmu_lock), as for_each_gfn_valid_sp_with_gptes() won't explode on garbage input, it's simply pointless. Link: https://lore.kernel.org/r/20240831001538.336683-13-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
||
|
Sean Christopherson
|
dfaae8447c |
KVM: x86/mmu: Try "unprotect for retry" iff there are indirect SPs
Try to unprotect shadow pages if and only if indirect_shadow_pages is non- zero, i.e. iff there is at least one protected such shadow page. Pre- checking indirect_shadow_pages avoids taking mmu_lock for write when the gfn is write-protected by a third party, i.e. not for KVM shadow paging, and in the *extremely* unlikely case that a different task has already unprotected the last shadow page. Link: https://lore.kernel.org/r/20240831001538.336683-10-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
||
|
Sean Christopherson
|
01dd4d3192 |
KVM: x86/mmu: Apply retry protection to "fast nTDP unprotect" path
Move the anti-infinite-loop protection provided by last_retry_{eip,addr}
into kvm_mmu_write_protect_fault() so that it guards unprotect+retry that
never hits the emulator, as well as reexecute_instruction(), which is the
last ditch "might as well try it" logic that kicks in when emulation fails
on an instruction that faulted on a write-protected gfn.
Add a new helper, kvm_mmu_unprotect_gfn_and_retry(), to set the retry
fields and deduplicate other code (with more to come).
Link: https://lore.kernel.org/r/20240831001538.336683-9-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
||
|
Sean Christopherson
|
2fb2b7877b |
KVM: x86/mmu: Skip emulation on page fault iff 1+ SPs were unprotected
When doing "fast unprotection" of nested TDP page tables, skip emulation
if and only if at least one gfn was unprotected, i.e. continue with
emulation if simply resuming is likely to hit the same fault and risk
putting the vCPU into an infinite loop.
Note, it's entirely possible to get a false negative, e.g. if a different
vCPU faults on the same gfn and unprotects the gfn first, but that's a
relatively rare edge case, and emulating is still functionally ok, i.e.
saving a few cycles by avoiding emulation isn't worth the risk of putting
the vCPU into an infinite loop.
Opportunistically rewrite the relevant comment to document in gory detail
exactly what scenario the "fast unprotect" logic is handling.
Fixes:
|
||
|
Sean Christopherson
|
989a84c93f |
KVM: x86/mmu: Trigger unprotect logic only on write-protection page faults
Trigger KVM's various "unprotect gfn" paths if and only if the page fault
was a write to a write-protected gfn. To do so, add a new page fault
return code, RET_PF_WRITE_PROTECTED, to explicitly and precisely track
such page faults.
If a page fault requires emulation for any MMIO (or any reason besides
write-protection), trying to unprotect the gfn is pointless and risks
putting the vCPU into an infinite loop. E.g. KVM will put the vCPU into
an infinite loop if the vCPU manages to trigger MMIO on a page table walk.
Fixes:
|
||
|
Sean Christopherson
|
4ececec19a |
KVM: x86/mmu: Replace PFERR_NESTED_GUEST_PAGE with a more descriptive helper
Drop the globally visible PFERR_NESTED_GUEST_PAGE and replace it with a more appropriately named is_write_to_guest_page_table(). The macro name is misleading, because while all nNPT walks match PAGE|WRITE|PRESENT, the reverse is not true. No functional change intended. Link: https://lore.kernel.org/r/20240831001538.336683-3-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
||
|
Sean Christopherson
|
acf2923271 |
KVM: x86/mmu: Clean up function comments for dirty logging APIs
Rework the function comment for kvm_arch_mmu_enable_log_dirty_pt_masked() into the body of the function, as it has gotten a bit stale, is harder to read without the code context, and is the last source of warnings for W=1 builds in KVM x86 due to using a kernel-doc comment without documenting all parameters. Opportunistically subsume the functions comments for kvm_mmu_write_protect_pt_masked() and kvm_mmu_clear_dirty_pt_masked(), as there is no value in regurgitating similar information at a higher level, and capturing the differences between write-protection and PML-based dirty logging is best done in a common location. No functional change intended. Cc: David Matlack <dmatlack@google.com> Reviewed-by: Kai Huang <kai.huang@intel.com> Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com> Link: https://lore.kernel.org/r/20240802202006.340854-1-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
||
|
Sean Christopherson
|
28cec7f08b |
KVM: x86/mmu: Check that root is valid/loaded when pre-faulting SPTEs
Error out if kvm_mmu_reload() fails when pre-faulting memory, as trying to
fault-in SPTEs will fail miserably due to root.hpa pointing at garbage.
Note, kvm_mmu_reload() can return -EIO and thus trigger the WARN on -EIO
in kvm_vcpu_pre_fault_memory(), but all such paths also WARN, i.e. the
WARN isn't user-triggerable and won't run afoul of warn-on-panic because
the kernel would already be panicking.
BUG: unable to handle page fault for address: 000029ffffffffe8
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] PREEMPT SMP
CPU: 22 PID: 1069 Comm: pre_fault_memor Not tainted 6.10.0-rc7-332d2c1d713e-next-vm #548
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:is_page_fault_stale+0x3e/0xe0 [kvm]
RSP: 0018:ffffc9000114bd48 EFLAGS: 00010206
RAX: 00003fffffffffc0 RBX: ffff88810a07c080 RCX: ffffc9000114bd78
RDX: ffff88810a07c080 RSI: ffffea0000000000 RDI: ffff88810a07c080
RBP: ffffc9000114bd78 R08: 00007fa3c8c00000 R09: 8000000000000225
R10: ffffea00043d7d80 R11: 0000000000000000 R12: ffff88810a07c080
R13: 0000000100000000 R14: ffffc9000114be58 R15: 0000000000000000
FS: 00007fa3c9da0740(0000) GS:ffff888277d80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000029ffffffffe8 CR3: 000000011d698000 CR4: 0000000000352eb0
Call Trace:
<TASK>
kvm_tdp_page_fault+0xcc/0x160 [kvm]
kvm_mmu_do_page_fault+0xfb/0x1f0 [kvm]
kvm_arch_vcpu_pre_fault_memory+0xd0/0x1a0 [kvm]
kvm_vcpu_ioctl+0x761/0x8c0 [kvm]
__x64_sys_ioctl+0x82/0xb0
do_syscall_64+0x5b/0x160
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
Modules linked in: kvm_intel kvm
CR2: 000029ffffffffe8
---[ end trace 0000000000000000 ]---
Fixes:
|
||
|
Yan Zhao
|
aa8d1f48d3 |
KVM: x86/mmu: Introduce a quirk to control memslot zap behavior
Introduce the quirk KVM_X86_QUIRK_SLOT_ZAP_ALL to allow users to select
KVM's behavior when a memslot is moved or deleted for KVM_X86_DEFAULT_VM
VMs. Make sure KVM behave as if the quirk is always disabled for
non-KVM_X86_DEFAULT_VM VMs.
The KVM_X86_QUIRK_SLOT_ZAP_ALL quirk offers two behavior options:
- when enabled: Invalidate/zap all SPTEs ("zap-all"),
- when disabled: Precisely zap only the leaf SPTEs within the range of the
moving/deleting memory slot ("zap-slot-leafs-only").
"zap-all" is today's KVM behavior to work around a bug [1] where the
changing the zapping behavior of memslot move/deletion would cause VM
instability for VMs with an Nvidia GPU assigned; while
"zap-slot-leafs-only" allows for more precise zapping of SPTEs within the
memory slot range, improving performance in certain scenarios [2], and
meeting the functional requirements for TDX.
Previous attempts to select "zap-slot-leafs-only" include a per-VM
capability approach [3] (which was not preferred because the root cause of
the bug remained unidentified) and a per-memslot flag approach [4]. Sean
and Paolo finally recommended the implementation of this quirk and
explained that it's the least bad option [5].
By default, the quirk is enabled on KVM_X86_DEFAULT_VM VMs to use
"zap-all". Users have the option to disable the quirk to select
"zap-slot-leafs-only" for specific KVM_X86_DEFAULT_VM VMs that are
unaffected by this bug.
For non-KVM_X86_DEFAULT_VM VMs, the "zap-slot-leafs-only" behavior is
always selected without user's opt-in, regardless of if the user opts for
"zap-all".
This is because it is assumed until proven otherwise that non-
KVM_X86_DEFAULT_VM VMs will not be exposed to the bug [1], and most
importantly, it's because TDX must have "zap-slot-leafs-only" always
selected. In TDX's case a memslot's GPA range can be a mixture of "private"
or "shared" memory. Shared is roughly analogous to how EPT is handled for
normal VMs, but private GPAs need lots of special treatment:
1) "zap-all" would require to zap private root page or non-leaf entries or
at least leaf-entries beyond the deleting memslot scope. However, TDX
demands that the root page of the private page table remains unchanged,
with leaf entries being zapped before non-leaf entries, and any dropped
private guest pages must be re-accepted by the guest.
2) if "zap-all" zaps only shared page tables, it would result in private
pages still being mapped when the memslot is gone. This may affect even
other processes if later the gmem fd was whole punched, causing the
pages being freed on the host while still mapped in the TD, because
there's no pgoff to the gfn information to zap the private page table
after memslot is gone.
So, simply go "zap-slot-leafs-only" as if the quirk is always disabled for
non-KVM_X86_DEFAULT_VM VMs to avoid manual opt-in for every VM type [6] or
complicating quirk disabling interface (current quirk disabling interface
is limited, no way to query quirks, or force them to be disabled).
Add a new function kvm_mmu_zap_memslot_leafs() to implement
"zap-slot-leafs-only". This function does not call kvm_unmap_gfn_range(),
bypassing special handling to APIC_ACCESS_PAGE_PRIVATE_MEMSLOT, as
1) The APIC_ACCESS_PAGE_PRIVATE_MEMSLOT cannot be created by users, nor can
it be moved. It is only deleted by KVM when APICv is permanently
inhibited.
2) kvm_vcpu_reload_apic_access_page() effectively does nothing when
APIC_ACCESS_PAGE_PRIVATE_MEMSLOT is deleted.
3) Avoid making all cpus request of KVM_REQ_APIC_PAGE_RELOAD can save on
costly IPIs.
Suggested-by: Kai Huang <kai.huang@intel.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://patchwork.kernel.org/project/kvm/patch/20190205210137.1377-11-sean.j.christopherson@intel.com [1]
Link: https://patchwork.kernel.org/project/kvm/patch/20190205210137.1377-11-sean.j.christopherson@intel.com/#25054908 [2]
Link: https://lore.kernel.org/kvm/20200713190649.GE29725@linux.intel.com/T/#mabc0119583dacf621025e9d873c85f4fbaa66d5c [3]
Link: https://lore.kernel.org/all/20240515005952.3410568-3-rick.p.edgecombe@intel.com [4]
Link: https://lore.kernel.org/all/7df9032d-83e4-46a1-ab29-6c7973a2ab0b@redhat.com [5]
Link: https://lore.kernel.org/all/ZnGa550k46ow2N3L@google.com [6]
Co-developed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Message-ID: <20240703021043.13881-1-yan.y.zhao@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
||
|
Ackerley Tng
|
aca0ec970d |
KVM: x86/mmu: fix determination of max NPT mapping level for private pages
The `if (req_max_level)` test was meant ignore req_max_level if
PG_LEVEL_NONE was returned. Hence, this function should return
max_level instead of the ignored req_max_level.
This is only a latent issue for now, since guest_memfd does not
support large pages.
Signed-off-by: Ackerley Tng <ackerleytng@google.com>
Message-ID: <20240801173955.1975034-1-ackerleytng@google.com>
Fixes:
|
||
|
Paolo Bonzini
|
4b5f67120a |
KVM: extend kvm_range_has_memory_attributes() to check subset of attributes
While currently there is no other attribute than KVM_MEMORY_ATTRIBUTE_PRIVATE, KVM code such as kvm_mem_is_private() is written to expect their existence. Allow using kvm_range_has_memory_attributes() as a multi-page version of kvm_mem_is_private(), without it breaking later when more attributes are introduced. Reviewed-by: Michael Roth <michael.roth@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Paolo Bonzini
|
5932ca411e |
KVM: x86: disallow pre-fault for SNP VMs before initialization
KVM_PRE_FAULT_MEMORY for an SNP guest can race with sev_gmem_post_populate() in bad ways. The following sequence for instance can potentially trigger an RMP fault: thread A, sev_gmem_post_populate: called thread B, sev_gmem_prepare: places below 'pfn' in a private state in RMP thread A, sev_gmem_post_populate: *vaddr = kmap_local_pfn(pfn + i); thread A, sev_gmem_post_populate: copy_from_user(vaddr, src + i * PAGE_SIZE, PAGE_SIZE); RMP #PF Fix this by only allowing KVM_PRE_FAULT_MEMORY to run after a guest's initial private memory contents have been finalized via KVM_SEV_SNP_LAUNCH_FINISH. Beyond fixing this issue, it just sort of makes sense to enforce this, since the KVM_PRE_FAULT_MEMORY documentation states: "KVM maps memory as if the vCPU generated a stage-2 read page fault" which sort of implies we should be acting on the same guest state that a vCPU would see post-launch after the initial guest memory is all set up. Co-developed-by: Michael Roth <michael.roth@amd.com> Signed-off-by: Michael Roth <michael.roth@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Wei Wang
|
896046474f |
KVM: x86: Introduce kvm_x86_call() to simplify static calls of kvm_x86_ops
Introduces kvm_x86_call(), to streamline the usage of static calls of kvm_x86_ops. The current implementation of these calls is verbose and could lead to alignment challenges. This makes the code susceptible to exceeding the "80 columns per single line of code" limit as defined in the coding-style document. Another issue with the existing implementation is that the addition of kvm_x86_ prefix to hooks at the static_call sites hinders code readability and navigation. kvm_x86_call() is added to improve code readability and maintainability, while adhering to the coding style guidelines. Signed-off-by: Wei Wang <wei.w.wang@intel.com> Link: https://lore.kernel.org/r/20240507133103.15052-3-wei.w.wang@intel.com Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Paolo Bonzini
|
5c5ddf7107 |
KVM x86 MTRR virtualization removal
Remove support for virtualizing MTRRs on Intel CPUs, along with a nasty CR0.CD hack, and instead always honor guest PAT on CPUs that support self-snoop. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEKTobbabEP7vbhhN9OlYIJqCjN/0FAmaRuwAACgkQOlYIJqCj N/32Gg/+Nnnz6TCRno2vursPJme7gvtLdqSxjazAj3u2ZO8IApGYWMyfVpS+ymC9 Wdpj6gRe2ukSxgTsUI2CYoy5V2NxDaA9YgdTPZUVQvqwujVrqZCJ7L393iPYYnC9 No3LXZ+SOYRmomiCzknjC6GOlT2hAZHzQsyaXDlEYok7NAA2L6XybbLonEdA4RYi V1mS62W5PaA4tUesuxkJjPujXo1nXRWD/aXOruJWjPESdSFSALlx7reFAf2Nwn7K Uw8yZqhq6vWAZSph0Nz8OrZOS/kULKA3q2zl1B/qJJ0ToAt2VdXS6abXky52RExf KvP+jBAWMO5kHbIqaMRtCHjbIkbhH8RdUIYNJQEUQ5DdydM5+/RDa+KprmLPcmUn qvJq+3uyH0MEENtneGegs8uxR+sn6fT32cGMIw790yIywddh562+IJ4Z+C3BuYJi yszD71odqKT8+knUd2CaZjE9UZyoQNDfj2OCCTzzZOC/6TuJWCh9CYQ1csssHbQR KcvZCKE6ht8tWwi+2HWj0laOdg1reX2kV869k3xH4uCwEaFIj2Wk+/Bw/lg2Tn5h 5uTnQ01dx5XhAV1klr6IY3VXJ/A8G8895wRfkZEelsA9Wj8qZvNgXhsoXReIUIrn aR0ppsFcbqHzC50qE2JT4juTD1EPx95LL9zKT8pI9mGKwxCAxUM= =yb10 -----END PGP SIGNATURE----- Merge tag 'kvm-x86-mtrrs-6.11' of https://github.com/kvm-x86/linux into HEAD KVM x86 MTRR virtualization removal Remove support for virtualizing MTRRs on Intel CPUs, along with a nasty CR0.CD hack, and instead always honor guest PAT on CPUs that support self-snoop. |
||
|
Paolo Bonzini
|
34b69edecb |
KVM x86 MMU changes for 6.11
- Don't allocate kvm_mmu_page.shadowed_translation for shadow pages that can't
hole leafs SPTEs.
- Unconditionally drop mmu_lock when allocating TDP MMU page tables for eager
page splitting to avoid stalling vCPUs when splitting huge pages.
- Misc cleanups
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEKTobbabEP7vbhhN9OlYIJqCjN/0FAmaRuqAACgkQOlYIJqCj
N/3wwQ//d1HyNn/INUq+KZzaNgPPRXB/phsyAiHg0N9w3COlB3WsPlVtX9u04mHe
12O8IDUmK4TufxPYrxdfMJPRup0Ewb0BOu5+n6fGOBzfaeBDlLF/SbX65I4KaiNI
taqfhBCW/4Jis9ESvrJpOZSdv7pAA2Q67aCKVoKrd4Vbrw/96lnrB1GLL662XzZ+
b7jm8nANoJgY4dLm7MVm33aSDQU35EXVHDWC9eWiaJmuXnFf7guf0rLKD1zkmNTI
fVpUmZUFI7pcZNMB8u7JNmMofx748yrDe/MT6GxcEoLky6YKLYSLv3tZfywO2OrO
vBJagYd1dy3798QQOCyqvtqc4OyHzv5jmwyLiKLGVgtavhYUWhFQUVSNy3p003S/
NfvLFOrT+cBAYE0D898bdoX0cvQQggdgC5UEXjzGaZAfG0TMRMv3klGSUS3NABnE
owtdV/2qIRsC+bybLhqaYvib5zjDrZDtzUU6+2wt0ugWrvF4Qn/RdnFmOWedGJ51
Mr0xwhL0wekKvO8QaF55b9JO8wyaN4UYrUkPLmuK3/AICPU1m9CfQmu2iIe1bdsd
303X94LOmsKNRlWTe8SWj5xWrC8LUH0P4g56/gT36ye08tzy7dfmX7T/6VwkVxS4
pGRFLhlV8rqxaCSDgJqs+EdpKhfGpo5LuBcwZzO1YQNcDxoKO0I=
=5Mgp
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-mmu-6.11' of https://github.com/kvm-x86/linux into HEAD
KVM x86 MMU changes for 6.11
- Don't allocate kvm_mmu_page.shadowed_translation for shadow pages that can't
hold leafs SPTEs.
- Unconditionally drop mmu_lock when allocating TDP MMU page tables for eager
page splitting to avoid stalling vCPUs when splitting huge pages.
- Misc cleanups
|
||
|
Paolo Bonzini
|
5dcc1e7614 |
KVM x86 misc changes for 6.11
- Add a global struct to consolidate tracking of host values, e.g. EFER, and
move "shadow_phys_bits" into the structure as "maxphyaddr".
- Add KVM_CAP_X86_APIC_BUS_CYCLES_NS to allow configuring the effective APIC
bus frequency, because TDX.
- Print the name of the APICv/AVIC inhibits in the relevant tracepoint.
- Clean up KVM's handling of vendor specific emulation to consistently act on
"compatible with Intel/AMD", versus checking for a specific vendor.
- Misc cleanups
-----BEGIN PGP SIGNATURE-----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=Cf2R
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-misc-6.11' of https://github.com/kvm-x86/linux into HEAD
KVM x86 misc changes for 6.11
- Add a global struct to consolidate tracking of host values, e.g. EFER, and
move "shadow_phys_bits" into the structure as "maxphyaddr".
- Add KVM_CAP_X86_APIC_BUS_CYCLES_NS to allow configuring the effective APIC
bus frequency, because TDX.
- Print the name of the APICv/AVIC inhibits in the relevant tracepoint.
- Clean up KVM's handling of vendor specific emulation to consistently act on
"compatible with Intel/AMD", versus checking for a specific vendor.
- Misc cleanups
|
||
|
Paolo Bonzini
|
f3996d4d79 |
Merge branch 'kvm-prefault' into HEAD
Pre-population has been requested several times to mitigate KVM page faults during guest boot or after live migration. It is also required by TDX before filling in the initial guest memory with measured contents. Introduce it as a generic API. |
||
|
Paolo Bonzini
|
6e01b7601d |
KVM: x86: Implement kvm_arch_vcpu_pre_fault_memory()
Wire KVM_PRE_FAULT_MEMORY ioctl to kvm_mmu_do_page_fault() to populate guest memory. It can be called right after KVM_CREATE_VCPU creates a vCPU, since at that point kvm_mmu_create() and kvm_init_mmu() are called and the vCPU is ready to invoke the KVM page fault handler. The helper function kvm_tdp_map_page() takes care of the logic to process RET_PF_* return values and convert them to success or errno. Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com> Message-ID: <9b866a0ae7147f96571c439e75429a03dcb659b6.1712785629.git.isaku.yamahata@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Paolo Bonzini
|
58ef24699b |
KVM: x86/mmu: Make kvm_mmu_do_page_fault() return mapped level
The guest memory population logic will need to know what page size or level (4K, 2M, ...) is mapped. Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com> Message-ID: <eabc3f3e5eb03b370cadf6e1901ea34d7a020adc.1712785629.git.isaku.yamahata@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Sean Christopherson
|
f5e7f00cf1 |
KVM: x86/mmu: Account pf_{fixed,emulate,spurious} in callers of "do page fault"
Move the accounting of the result of kvm_mmu_do_page_fault() to its callers, as only pf_fixed is common to guest page faults and async #PFs, and upcoming support KVM_PRE_FAULT_MEMORY won't bump _any_ stats. Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Sean Christopherson
|
5186ec223b |
KVM: x86/mmu: Bump pf_taken stat only in the "real" page fault handler
Account stat.pf_taken in kvm_mmu_page_fault(), i.e. the actual page fault handler, instead of conditionally bumping it in kvm_mmu_do_page_fault(). The "real" page fault handler is the only path that should ever increment the number of taken page faults, as all other paths that "do page fault" are by definition not handling faults that occurred in the guest. Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Rick Edgecombe
|
c2f38f75fc |
KVM: x86/tdp_mmu: Take a GFN in kvm_tdp_mmu_fast_pf_get_last_sptep()
Pass fault->gfn into kvm_tdp_mmu_fast_pf_get_last_sptep(), instead of passing fault->addr and then converting it to a GFN. Future changes will make fault->addr and fault->gfn differ when running TDX guests. The GFN will be conceptually the same as it is for normal VMs, but fault->addr may contain a TDX specific bit that differentiates between "shared" and "private" memory. This bit will be used to direct faults to be handled on different roots, either the normal "direct" root or a new type of root that handles private memory. The TDP iterators will process the traditional GFN concept and apply the required TDX specifics depending on the root type. For this reason, it needs to operate on regular GFN and not the addr, which may contain these special TDX specific bits. Today kvm_tdp_mmu_fast_pf_get_last_sptep() takes fault->addr and then immediately converts it to a GFN with a bit shift. However, this would unfortunately retain the TDX specific bits in what is supposed to be a traditional GFN. Excluding TDX's needs, it is also is unnecessary to pass fault->addr and convert it to a GFN when the GFN is already on hand. So instead just pass the GFN into kvm_tdp_mmu_fast_pf_get_last_sptep() and use it directly. Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Message-ID: <20240619223614.290657-9-rick.p.edgecombe@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Rick Edgecombe
|
964cea8171 |
KVM: x86/tdp_mmu: Rename REMOVED_SPTE to FROZEN_SPTE
Rename REMOVED_SPTE to FROZEN_SPTE so that it can be used for other multi-part operations. REMOVED_SPTE is used as a non-present intermediate value for multi-part operations that can happen when a thread doesn't have an MMU write lock. Today these operations are when removing PTEs. However, future changes will want to use the same concept for setting a PTE. In that case the REMOVED_SPTE name does not quite fit. So rename it to FROZEN_SPTE so it can be used for both types of operations. Also rename the relevant helpers and comments that refer to "removed" within the context of the SPTE value. Take care to not update naming referring the "remove" operations, which are still distinct. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Message-ID: <20240619223614.290657-2-rick.p.edgecombe@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Paolo Bonzini
|
02b0d3b9d4 | Merge branch 'kvm-6.10-fixes' into HEAD | ||
|
Sean Christopherson
|
caa7278829 |
KVM: x86/mmu: Rephrase comment about synthetic PFERR flags in #PF handler
Reword the BUILD_BUG_ON() comment in the legacy #PF handler to explicitly describe how asserting that synthetic PFERR flags are limited to bits 31:0 protects KVM against inadvertently passing a synthetic flag to the common page fault handler. No functional change intended. Suggested-by: Xiaoyao Li <xiaoyao.li@intel.com> Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com> Link: https://lore.kernel.org/r/20240608001108.3296879-1-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
||
|
Sean Christopherson
|
377b2f359d |
KVM: VMX: Always honor guest PAT on CPUs that support self-snoop
Unconditionally honor guest PAT on CPUs that support self-snoop, as Intel has confirmed that CPUs that support self-snoop always snoop caches and store buffers. I.e. CPUs with self-snoop maintain cache coherency even in the presence of aliased memtypes, thus there is no need to trust the guest behaves and only honor PAT as a last resort, as KVM does today. Honoring guest PAT is desirable for use cases where the guest has access to non-coherent DMA _without_ bouncing through VFIO, e.g. when a virtual (mediated, for all intents and purposes) GPU is exposed to the guest, along with buffers that are consumed directly by the physical GPU, i.e. which can't be proxied by the host to ensure writes from the guest are performed with the correct memory type for the GPU. Cc: Yiwei Zhang <zzyiwei@google.com> Suggested-by: Yan Zhao <yan.y.zhao@intel.com> Suggested-by: Kevin Tian <kevin.tian@intel.com> Tested-by: Xiangfei Ma <xiangfeix.ma@intel.com> Tested-by: Yongwei Ma <yongwei.ma@intel.com> Link: https://lore.kernel.org/r/20240309010929.1403984-6-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
||
|
Sean Christopherson
|
0a7b73559b |
KVM: x86: Remove VMX support for virtualizing guest MTRR memtypes
Remove KVM's support for virtualizing guest MTRR memtypes, as full MTRR adds no value, negatively impacts guest performance, and is a maintenance burden due to it's complexity and oddities. KVM's approach to virtualizating MTRRs make no sense, at all. KVM *only* honors guest MTRR memtypes if EPT is enabled *and* the guest has a device that may perform non-coherent DMA access. From a hardware virtualization perspective of guest MTRRs, there is _nothing_ special about EPT. Legacy shadowing paging doesn't magically account for guest MTRRs, nor does NPT. Unwinding and deciphering KVM's murky history, the MTRR virtualization code appears to be the result of misdiagnosed issues when EPT + VT-d with passthrough devices was enabled years and years ago. And importantly, the underlying bugs that were fudged around by honoring guest MTRR memtypes have since been fixed (though rather poorly in some cases). The zapping GFNs logic in the MTRR virtualization code came from: commit |
||
|
Tao Su
|
db574f2f96 |
KVM: x86/mmu: Don't save mmu_invalidate_seq after checking private attr
Drop the second snapshot of mmu_invalidate_seq in kvm_faultin_pfn().
Before checking the mismatch of private vs. shared, mmu_invalidate_seq is
saved to fault->mmu_seq, which can be used to detect an invalidation
related to the gfn occurred, i.e. KVM will not install a mapping in page
table if fault->mmu_seq != mmu_invalidate_seq.
Currently there is a second snapshot of mmu_invalidate_seq, which may not
be same as the first snapshot in kvm_faultin_pfn(), i.e. the gfn attribute
may be changed between the two snapshots, but the gfn may be mapped in
page table without hindrance. Therefore, drop the second snapshot as it
has no obvious benefits.
Fixes:
|
||
|
Hou Wenlong
|
9ecc1c119b |
KVM: x86/mmu: Only allocate shadowed translation cache for sp->role.level <= KVM_MAX_HUGEPAGE_LEVEL
Only the indirect SP with sp->role.level <= KVM_MAX_HUGEPAGE_LEVEL might have leaf gptes, so allocation of shadowed translation cache is needed only for it. Then, it can use sp->shadowed_translation to determine whether to use the information in the shadowed translation cache or not. Also, extend the WARN in FNAME(sync_spte)() to ensure that this won't break shadow_mmu_get_sp_for_split(). Suggested-by: Lai Jiangshan <jiangshan.ljs@antgroup.com> Signed-off-by: Hou Wenlong <houwenlong.hwl@antgroup.com> Link: https://lore.kernel.org/r/5b0cda8a7456cda476b14fca36414a56f921dd52.1715398655.git.houwenlong.hwl@antgroup.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
||
|
Liang Chen
|
4f8973e65f |
KVM: x86: invalid_list not used anymore in mmu_shrink_scan
'invalid_list' is now gathered in KVM_MMU_ZAP_OLDEST_MMU_PAGES. Signed-off-by: Liang Chen <liangchen.linux@gmail.com> Link: https://lore.kernel.org/r/20240509044710.18788-1-liangchen.linux@gmail.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
||
|
Paolo Bonzini
|
ab978c62e7 |
Merge branch 'kvm-6.11-sev-snp' into HEAD
Pull base x86 KVM support for running SEV-SNP guests from Michael Roth: * add some basic infrastructure and introduces a new KVM_X86_SNP_VM vm_type to handle differences versus the existing KVM_X86_SEV_VM and KVM_X86_SEV_ES_VM types. * implement the KVM API to handle the creation of a cryptographic launch context, encrypt/measure the initial image into guest memory, and finalize it before launching it. * implement handling for various guest-generated events such as page state changes, onlining of additional vCPUs, etc. * implement the gmem/mmu hooks needed to prepare gmem-allocated pages before mapping them into guest private memory ranges as well as cleaning them up prior to returning them to the host for use as normal memory. Because those cleanup hooks supplant certain activities like issuing WBINVDs during KVM MMU invalidations, avoid duplicating that work to avoid unecessary overhead. This merge leaves out support support for attestation guest requests and for loading the signing keys to be used for attestation requests. |
||
|
Sean Christopherson
|
82897db912 |
KVM: x86: Move shadow_phys_bits into "kvm_host", as "maxphyaddr"
Move shadow_phys_bits into "struct kvm_host_values", i.e. into KVM's global "kvm_host" variable, so that it is automatically exported for use in vendor modules. Rename the variable/field to maxphyaddr to more clearly capture what value it holds, now that it's used outside of the MMU (and because the "shadow" part is more than a bit misleading as the variable is not at all unique to shadow paging). Recomputing the raw/true host.MAXPHYADDR on every use can be subtly expensive, e.g. it will incur a VM-Exit on the CPUID if KVM is running as a nested hypervisor. Vendor code already has access to the information, e.g. by directly doing CPUID or by invoking kvm_get_shadow_phys_bits(), so there's no tangible benefit to making it MMU-only. Link: https://lore.kernel.org/r/20240423221521.2923759-5-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
||
|
Sean Christopherson
|
bca99c0356 |
KVM: x86/mmu: Print SPTEs on unexpected #VE
Print the SPTEs that correspond to the faulting GPA on an unexpected EPT Violation #VE to help the user debug failures, e.g. to pinpoint which SPTE didn't have SUPPRESS_VE set. Opportunistically assert that the underlying exit reason was indeed an EPT Violation, as the CPU has *really* gone off the rails if a #VE occurs due to a completely unexpected exit reason. Signed-off-by: Sean Christopherson <seanjc@google.com> Message-ID: <20240518000430.1118488-7-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Sean Christopherson
|
837d557aba |
KVM: x86/mmu: Add sanity checks that KVM doesn't create EPT #VE SPTEs
Assert that KVM doesn't set a SPTE to a value that could trigger an EPT Violation #VE on a non-MMIO SPTE, e.g. to help detect bugs even without KVM_INTEL_PROVE_VE enabled, and to help debug actual #VE failures. Note, this will run afoul of TDX support, which needs to reflect emulated MMIO accesses into the guest as #VEs (which was the whole point of adding EPT Violation #VE support in KVM). The obvious fix for that is to exempt MMIO SPTEs, but that's annoyingly difficult now that is_mmio_spte() relies on a per-VM value. However, resolving that conundrum is a future problem, whereas getting KVM_INTEL_PROVE_VE healthy is a current problem. Signed-off-by: Sean Christopherson <seanjc@google.com> Message-ID: <20240518000430.1118488-5-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Brijesh Singh
|
c63cf135cc |
KVM: SEV: Add support to handle RMP nested page faults
When SEV-SNP is enabled in the guest, the hardware places restrictions on all memory accesses based on the contents of the RMP table. When hardware encounters RMP check failure caused by the guest memory access it raises the #NPF. The error code contains additional information on the access type. See the APM volume 2 for additional information. When using gmem, RMP faults resulting from mismatches between the state in the RMP table vs. what the guest expects via its page table result in KVM_EXIT_MEMORY_FAULTs being forwarded to userspace to handle. This means the only expected case that needs to be handled in the kernel is when the page size of the entry in the RMP table is larger than the mapping in the nested page table, in which case a PSMASH instruction needs to be issued to split the large RMP entry into individual 4K entries so that subsequent accesses can succeed. Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Co-developed-by: Michael Roth <michael.roth@amd.com> Signed-off-by: Michael Roth <michael.roth@amd.com> Signed-off-by: Ashish Kalra <ashish.kalra@amd.com> Message-ID: <20240501085210.2213060-12-michael.roth@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Michael Roth
|
b74d002d3d |
KVM: MMU: Disable fast path if KVM_EXIT_MEMORY_FAULT is needed
For hardware-protected VMs like SEV-SNP guests, certain conditions like attempting to perform a write to a page which is not in the state that the guest expects it to be in can result in a nested/extended #PF which can only be satisfied by the host performing an implicit page state change to transition the page into the expected shared/private state. This is generally handled by generating a KVM_EXIT_MEMORY_FAULT event that gets forwarded to userspace to handle via KVM_SET_MEMORY_ATTRIBUTES. However, the fast_page_fault() code might misconstrue this situation as being the result of a write-protected access, and treat it as a spurious case when it sees that writes are already allowed for the sPTE. This results in the KVM MMU trying to resume the guest rather than taking any action to satisfy the real source of the #PF such as generating a KVM_EXIT_MEMORY_FAULT, resulting in the guest spinning on nested #PFs. Check for this condition and bail out of the fast path if it is detected. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Suggested-by: Sean Christopherson <seanjc@google.com> Cc: Isaku Yamahata <isaku.yamahata@intel.com> Reviewed-by: Isaku Yamahata <isaku.yamahata@intel.com> Signed-off-by: Michael Roth <michael.roth@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Paolo Bonzini
|
7323260373 |
Merge branch 'kvm-coco-hooks' into HEAD
Common patches for the target-independent functionality and hooks that are needed by SEV-SNP and TDX. |
||
|
Paolo Bonzini
|
7d41e24da2 |
KVM x86 misc changes for 6.10:
- Advertise the max mappable GPA in the "guest MAXPHYADDR" CPUID field, which
is unused by hardware, so that KVM can communicate its inability to map GPAs
that set bits 51:48 due to lack of 5-level paging. Guest firmware is
expected to use the information to safely remap BARs in the uppermost GPA
space, i.e to avoid placing a BAR at a legal, but unmappable, GPA.
- Use vfree() instead of kvfree() for allocations that always use vcalloc()
or __vcalloc().
- Don't completely ignore same-value writes to immutable feature MSRs, as
doing so results in KVM failing to reject accesses to MSR that aren't
supposed to exist given the vCPU model and/or KVM configuration.
- Don't mark APICv as being inhibited due to ABSENT if APICv is disabled
KVM-wide to avoid confusing debuggers (KVM will never bother clearing the
ABSENT inhibit, even if userspace enables in-kernel local APIC).
-----BEGIN PGP SIGNATURE-----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=9RXP
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-misc-6.10' of https://github.com/kvm-x86/linux into HEAD
KVM x86 misc changes for 6.10:
- Advertise the max mappable GPA in the "guest MAXPHYADDR" CPUID field, which
is unused by hardware, so that KVM can communicate its inability to map GPAs
that set bits 51:48 due to lack of 5-level paging. Guest firmware is
expected to use the information to safely remap BARs in the uppermost GPA
space, i.e to avoid placing a BAR at a legal, but unmappable, GPA.
- Use vfree() instead of kvfree() for allocations that always use vcalloc()
or __vcalloc().
- Don't completely ignore same-value writes to immutable feature MSRs, as
doing so results in KVM failing to reject accesses to MSR that aren't
supposed to exist given the vCPU model and/or KVM configuration.
- Don't mark APICv as being inhibited due to ABSENT if APICv is disabled
KVM-wide to avoid confusing debuggers (KVM will never bother clearing the
ABSENT inhibit, even if userspace enables in-kernel local APIC).
|
||
|
Paolo Bonzini
|
5a1c72e07e |
KVM x86 MMU changes for 6.10:
- Process TDP MMU SPTEs that are are zapped while holding mmu_lock for read
after replacing REMOVED_SPTE with '0' and flushing remote TLBs, which allows
vCPU tasks to repopulate the zapped region while the zapper finishes tearing
down the old, defunct page tables.
- Fix a longstanding, likely benign-in-practice race where KVM could fail to
detect a write from kvm_mmu_track_write() to a shadowed GPTE if the GPTE is
first page table being shadowed.
-----BEGIN PGP SIGNATURE-----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=Izml
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-mmu-6.10' of https://github.com/kvm-x86/linux into HEAD
KVM x86 MMU changes for 6.10:
- Process TDP MMU SPTEs that are are zapped while holding mmu_lock for read
after replacing REMOVED_SPTE with '0' and flushing remote TLBs, which allows
vCPU tasks to repopulate the zapped region while the zapper finishes tearing
down the old, defunct page tables.
- Fix a longstanding, likely benign-in-practice race where KVM could fail to
detect a write from kvm_mmu_track_write() to a shadowed GPTE if the GPTE is
first page table being shadowed.
|
||
|
Paolo Bonzini
|
4232da23d7 |
Merge tag 'loongarch-kvm-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD
LoongArch KVM changes for v6.10 1. Add ParaVirt IPI support. 2. Add software breakpoint support. 3. Add mmio trace events support. |
||
|
Paolo Bonzini
|
f36508422a |
Merge branch 'kvm-coco-pagefault-prep' into HEAD
A combination of prep work for TDX and SNP, and a clean up of the page fault path to (hopefully) make it easier to follow the rules for private memory, noslot faults, writes to read-only slots, etc. |
||
|
Michael Roth
|
f32fb32820 |
KVM: x86: Add hook for determining max NPT mapping level
In the case of SEV-SNP, whether or not a 2MB page can be mapped via a 2MB mapping in the guest's nested page table depends on whether or not any subpages within the range have already been initialized as private in the RMP table. The existing mixed-attribute tracking in KVM is insufficient here, for instance: - gmem allocates 2MB page - guest issues PVALIDATE on 2MB page - guest later converts a subpage to shared - SNP host code issues PSMASH to split 2MB RMP mapping to 4K - KVM MMU splits NPT mapping to 4K - guest later converts that shared page back to private At this point there are no mixed attributes, and KVM would normally allow for 2MB NPT mappings again, but this is actually not allowed because the RMP table mappings are 4K and cannot be promoted on the hypervisor side, so the NPT mappings must still be limited to 4K to match this. Add a hook to determine the max NPT mapping size in situations like this. Suggested-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Michael Roth <michael.roth@amd.com> Reviewed-by: Isaku Yamahata <isaku.yamahata@intel.com> Message-ID: <20240501085210.2213060-3-michael.roth@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Sean Christopherson
|
2b1f435505 |
KVM: x86/mmu: Sanity check that __kvm_faultin_pfn() doesn't create noslot pfns
WARN if __kvm_faultin_pfn() generates a "no slot" pfn, and gracefully handle the unexpected behavior instead of continuing on with dangerous state, e.g. tdp_mmu_map_handle_target_level() _only_ checks fault->slot, and so could install a bogus PFN into the guest. The existing code is functionally ok, because kvm_faultin_pfn() pre-checks all of the cases that result in KVM_PFN_NOSLOT, but it is unnecessarily unsafe as it relies on __gfn_to_pfn_memslot() getting the _exact_ same memslot, i.e. not a re-retrieved pointer with KVM_MEMSLOT_INVALID set. And checking only fault->slot would fall apart if KVM ever added a flag or condition that forced emulation, similar to how KVM handles writes to read-only memslots. Cc: David Matlack <dmatlack@google.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Kai Huang <kai.huang@intel.com> Message-ID: <20240228024147.41573-17-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Sean Christopherson
|
36d4492765 |
KVM: x86/mmu: Set kvm_page_fault.hva to KVM_HVA_ERR_BAD for "no slot" faults
Explicitly set fault->hva to KVM_HVA_ERR_BAD when handling a "no slot" fault to ensure that KVM doesn't use a bogus virtual address, e.g. if there *was* a slot but it's unusable (APIC access page), or if there really was no slot, in which case fault->hva will be '0' (which is a legal address for x86). Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Kai Huang <kai.huang@intel.com> Message-ID: <20240228024147.41573-15-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Sean Christopherson
|
f6adeae81f |
KVM: x86/mmu: Handle no-slot faults at the beginning of kvm_faultin_pfn()
Handle the "no memslot" case at the beginning of kvm_faultin_pfn(), just after the private versus shared check, so that there's no need to repeatedly query whether or not a slot exists. This also makes it more obvious that, except for private vs. shared attributes, the process of faulting in a pfn simply doesn't apply to gfns without a slot. Opportunistically stuff @fault's metadata in kvm_handle_noslot_fault() so that it doesn't need to be duplicated in all paths that invoke kvm_handle_noslot_fault(), and to minimize the probability of not stuffing the right fields. Leave the existing handle behind, but convert it to a WARN, to guard against __kvm_faultin_pfn() unexpectedly nullifying fault->slot. Cc: David Matlack <dmatlack@google.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Kai Huang <kai.huang@intel.com> Message-ID: <20240228024147.41573-14-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Sean Christopherson
|
cd272fc439 |
KVM: x86/mmu: Move slot checks from __kvm_faultin_pfn() to kvm_faultin_pfn()
Move the checks related to the validity of an access to a memslot from the inner __kvm_faultin_pfn() to its sole caller, kvm_faultin_pfn(). This allows emulating accesses to the APIC access page, which don't need to resolve a pfn, even if there is a relevant in-progress mmu_notifier invalidation. Ditto for accesses to KVM internal memslots from L2, which KVM also treats as emulated MMIO. More importantly, this will allow for future cleanup by having the "no memslot" case bail from kvm_faultin_pfn() very early on. Go to rather extreme and gross lengths to make the change a glorified nop, e.g. call into __kvm_faultin_pfn() even when there is no slot, as the related code is very subtle. E.g. fault->slot can be nullified if it points at the APIC access page, some flows in KVM x86 expect fault->pfn to be KVM_PFN_NOSLOT, while others check only fault->slot, etc. No functional change intended. Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Kai Huang <kai.huang@intel.com> Message-ID: <20240228024147.41573-13-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Sean Christopherson
|
bde9f9d27e |
KVM: x86/mmu: Explicitly disallow private accesses to emulated MMIO
Explicitly detect and disallow private accesses to emulated MMIO in kvm_handle_noslot_fault() instead of relying on kvm_faultin_pfn_private() to perform the check. This will allow the page fault path to go straight to kvm_handle_noslot_fault() without bouncing through __kvm_faultin_pfn(). Signed-off-by: Sean Christopherson <seanjc@google.com> Message-ID: <20240228024147.41573-12-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Sean Christopherson
|
5bd74f6eec |
KVM: x86/mmu: Don't force emulation of L2 accesses to non-APIC internal slots
Allow mapping KVM's internal memslots used for EPT without unrestricted guest into L2, i.e. allow mapping the hidden TSS and the identity mapped page tables into L2. Unlike the APIC access page, there is no correctness issue with letting L2 access the "hidden" memory. Allowing these memslots to be mapped into L2 fixes a largely theoretical bug where KVM could incorrectly emulate subsequent _L1_ accesses as MMIO, and also ensures consistent KVM behavior for L2. If KVM is using TDP, but L1 is using shadow paging for L2, then routing through kvm_handle_noslot_fault() will incorrectly cache the gfn as MMIO, and create an MMIO SPTE. Creating an MMIO SPTE is ok, but only because kvm_mmu_page_role.guest_mode ensure KVM uses different roots for L1 vs. L2. But vcpu->arch.mmio_gfn will remain valid, and could cause KVM to incorrectly treat an L1 access to the hidden TSS or identity mapped page tables as MMIO. Furthermore, forcing L2 accesses to be treated as "no slot" faults doesn't actually prevent exposing KVM's internal memslots to L2, it simply forces KVM to emulate the access. In most cases, that will trigger MMIO, amusingly due to filling vcpu->arch.mmio_gfn, but also because vcpu_is_mmio_gpa() unconditionally treats APIC accesses as MMIO, i.e. APIC accesses are ok. But the hidden TSS and identity mapped page tables could go either way (MMIO or access the private memslot's backing memory). Alternatively, the inconsistent emulator behavior could be addressed by forcing MMIO emulation for L2 access to all internal memslots, not just to the APIC. But that's arguably less correct than letting L2 access the hidden TSS and identity mapped page tables, not to mention that it's *extremely* unlikely anyone cares what KVM does in this case. From L1's perspective there is R/W memory at those memslots, the memory just happens to be initialized with non-zero data. Making the memory disappear when it is accessed by L2 is far more magical and arbitrary than the memory existing in the first place. The APIC access page is special because KVM _must_ emulate the access to do the right thing (emulate an APIC access instead of reading/writing the APIC access page). And despite what commit |
||
|
Sean Christopherson
|
44f42ef37d |
KVM: x86/mmu: Move private vs. shared check above slot validity checks
Prioritize private vs. shared gfn attribute checks above slot validity
checks to ensure a consistent userspace ABI. E.g. as is, KVM will exit to
userspace if there is no memslot, but emulate accesses to the APIC access
page even if the attributes mismatch.
Fixes:
|
||
|
Sean Christopherson
|
07702e5a6d |
KVM: x86/mmu: WARN and skip MMIO cache on private, reserved page faults
WARN and skip the emulated MMIO fastpath if a private, reserved page fault is encountered, as private+reserved should be an impossible combination (KVM should never create an MMIO SPTE for a private access). Signed-off-by: Sean Christopherson <seanjc@google.com> Message-ID: <20240228024147.41573-9-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Paolo Bonzini
|
cd389f5070 |
KVM: x86/mmu: check for invalid async page faults involving private memory
Right now the error code is not used when an async page fault is completed. This is not a problem in the current code, but it is untidy. For protected VMs, we will also need to check that the page attributes match the current state of the page, because asynchronous page faults can only occur on shared pages (private pages go through kvm_faultin_pfn_private() instead of __gfn_to_pfn_memslot()). Start by piping the error code from kvm_arch_setup_async_pf() to kvm_arch_async_page_ready() via the architecture-specific async page fault data. For now, it can be used to assert that there are no async page faults on private memory. Extracted from a patch by Isaku Yamahata. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Sean Christopherson
|
b3d5dc629c |
KVM: x86/mmu: Use synthetic page fault error code to indicate private faults
Add and use a synthetic, KVM-defined page fault error code to indicate whether a fault is to private vs. shared memory. TDX and SNP have different mechanisms for reporting private vs. shared, and KVM's software-protected VMs have no mechanism at all. Usurp an error code flag to avoid having to plumb another parameter to kvm_mmu_page_fault() and friends. Alternatively, KVM could borrow AMD's PFERR_GUEST_ENC_MASK, i.e. set it for TDX and software-protected VMs as appropriate, but that would require *clearing* the flag for SEV and SEV-ES VMs, which support encrypted memory at the hardware layer, but don't utilize private memory at the KVM layer. Opportunistically add a comment to call out that the logic for software- protected VMs is (and was before this commit) broken for nested MMUs, i.e. for nested TDP, as the GPA is an L2 GPA. Punt on trying to play nice with nested MMUs as there is a _lot_ of functionality that simply doesn't work for software-protected VMs, e.g. all of the paths where KVM accesses guest memory need to be updated to be aware of private vs. shared memory. Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20240228024147.41573-6-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Sean Christopherson
|
7bdbb820fe |
KVM: x86/mmu: WARN if upper 32 bits of legacy #PF error code are non-zero
WARN if bits 63:32 are non-zero when handling an intercepted legacy #PF, as the error code for #PF is limited to 32 bits (and in practice, 16 bits on Intel CPUS). This behavior is architectural, is part of KVM's ABI (see kvm_vcpu_events.error_code), and is explicitly documented as being preserved for intecerpted #PF in both the APM: The error code saved in EXITINFO1 is the same as would be pushed onto the stack by a non-intercepted #PF exception in protected mode. and even more explicitly in the SDM as VMCS.VM_EXIT_INTR_ERROR_CODE is a 32-bit field. Simply drop the upper bits if hardware provides garbage, as spurious information should do no harm (though in all likelihood hardware is buggy and the kernel is doomed). Handling all upper 32 bits in the #PF path will allow moving the sanity check on synthetic checks from kvm_mmu_page_fault() to npf_interception(), which in turn will allow deriving PFERR_PRIVATE_ACCESS from AMD's PFERR_GUEST_ENC_MASK without running afoul of the sanity check. Note, this is also why Intel uses bit 15 for SGX (highest bit on Intel CPUs) and AMD uses bit 31 for RMP (highest bit on AMD CPUs); using the highest bit minimizes the probability of a collision with the "other" vendor, without needing to plumb more bits through microcode. Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Kai Huang <kai.huang@intel.com> Message-ID: <20240228024147.41573-7-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Isaku Yamahata
|
c9710130cc |
KVM: x86/mmu: Pass full 64-bit error code when handling page faults
Plumb the full 64-bit error code throughout the page fault handling code so that KVM can use the upper 32 bits, e.g. SNP's PFERR_GUEST_ENC_MASK will be used to determine whether or not a fault is private vs. shared. Note, passing the 64-bit error code to FNAME(walk_addr)() does NOT change the behavior of permission_fault() when invoked in the page fault path, as KVM explicitly clears PFERR_IMPLICIT_ACCESS in kvm_mmu_page_fault(). Continue passing '0' from the async #PF worker, as guest_memfd and thus private memory doesn't support async page faults. Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com> [mdr: drop references/changes on rebase, update commit message] Signed-off-by: Michael Roth <michael.roth@amd.com> [sean: drop truncation in call to FNAME(walk_addr)(), rewrite changelog] Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com> Message-ID: <20240228024147.41573-5-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Sean Christopherson
|
dee281e4b4 |
KVM: x86: Move synthetic PFERR_* sanity checks to SVM's #NPF handler
Move the sanity check that hardware never sets bits that collide with KVM- define synthetic bits from kvm_mmu_page_fault() to npf_interception(), i.e. make the sanity check #NPF specific. The legacy #PF path already WARNs if _any_ of bits 63:32 are set, and the error code that comes from VMX's EPT Violatation and Misconfig is 100% synthesized (KVM morphs VMX's EXIT_QUALIFICATION into error code flags). Add a compile-time assert in the legacy #PF handler to make sure that KVM- define flags are covered by its existing sanity check on the upper bits. Opportunistically add a description of PFERR_IMPLICIT_ACCESS, since we are removing the comment that defined it. Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Kai Huang <kai.huang@intel.com> Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com> Message-ID: <20240228024147.41573-8-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Sean Christopherson
|
d0bf8e6e44 |
KVM: x86/mmu: Exit to userspace with -EFAULT if private fault hits emulation
Exit to userspace with -EFAULT / KVM_EXIT_MEMORY_FAULT if a private fault triggers emulation of any kind, as KVM doesn't currently support emulating access to guest private memory. Practically speaking, private faults and emulation are already mutually exclusive, but there are many flow that can result in KVM returning RET_PF_EMULATE, and adding one last check to harden against weird, unexpected combinations and/or KVM bugs is inexpensive. Suggested-by: Yan Zhao <yan.y.zhao@intel.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-ID: <20240228024147.41573-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Sean Christopherson
|
226d9b8f16 |
KVM: x86/mmu: Fix a largely theoretical race in kvm_mmu_track_write()
Add full memory barriers in kvm_mmu_track_write() and account_shadowed()
to plug a (very, very theoretical) race where kvm_mmu_track_write() could
miss a 0->1 transition of indirect_shadow_pages and fail to zap relevant,
*stale* SPTEs.
Without the barriers, because modern x86 CPUs allow (per the SDM):
Reads may be reordered with older writes to different locations but not
with older writes to the same location.
it's possible that the following could happen (terms of values being
visible/resolved):
CPU0 CPU1
read memory[gfn] (=Y)
memory[gfn] Y=>X
read indirect_shadow_pages (=0)
indirect_shadow_pages 0=>1
or conversely:
CPU0 CPU1
indirect_shadow_pages 0=>1
read indirect_shadow_pages (=0)
read memory[gfn] (=Y)
memory[gfn] Y=>X
E.g. in the below scenario, CPU0 could fail to zap SPTEs, and CPU1 could
fail to retry the faulting instruction, resulting in a KVM entering the
guest with a stale SPTE (map PTE=X instead of PTE=Y).
PTE = X;
CPU0:
emulator_write_phys()
PTE = Y
kvm_page_track_write()
kvm_mmu_track_write()
// memory barrier missing here
if (indirect_shadow_pages)
zap();
CPU1:
FNAME(page_fault)
FNAME(walk_addr)
FNAME(walk_addr_generic)
gw->pte = PTE; // X
FNAME(fetch)
kvm_mmu_get_child_sp
kvm_mmu_get_shadow_page
__kvm_mmu_get_shadow_page
kvm_mmu_alloc_shadow_page
account_shadowed
indirect_shadow_pages++
// memory barrier missing here
if (FNAME(gpte_changed)) // if (PTE == X)
return RET_PF_RETRY;
In practice, this bug likely cannot be observed as both the 0=>1
transition and reordering of this scope are extremely rare occurrences.
Note, if the cost of the barrier (which is simply a locked ADD, see commit
|
||
|
Sean Christopherson
|
949019b982 |
KVM: x86/mmu: Track shadow MMIO value on a per-VM basis
TDX will use a different shadow PTE entry value for MMIO from VMX. Add a member to kvm_arch and track value for MMIO per-VM instead of a global variable. By using the per-VM EPT entry value for MMIO, the existing VMX logic is kept working. Introduce a separate setter function so that guest TD can use a different value later. Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com> Message-Id: <229a18434e5d83f45b1fcd7bf1544d79db1becb6.1705965635.git.isaku.yamahata@intel.com> Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com> Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Sean Christopherson
|
d8fa2031fa |
KVM: x86/mmu: Replace hardcoded value 0 for the initial value for SPTE
The TDX support will need the "suppress #VE" bit (bit 63) set as the initial value for SPTE. To reduce code change size, introduce a new macro SHADOW_NONPRESENT_VALUE for the initial value for the shadow page table entry (SPTE) and replace hard-coded value 0 for it. Initialize shadow page tables with their value. The plan is to unconditionally set the "suppress #VE" bit for both AMD and Intel as: 1) AMD hardware uses the bit 63 as NX for present SPTE and ignored for non-present SPTE; 2) for conventional VMX guests, KVM never enables the "EPT-violation #VE" in VMCS control and "suppress #VE" bit is ignored by hardware. No functional change intended. Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com> Message-Id: <acdf09bf60cad12c495005bf3495c54f6b3069c9.1705965635.git.isaku.yamahata@intel.com> [Remove unnecessary CONFIG_X86_64 check. - Paolo] Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com> Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Paolo Bonzini
|
1c3bed8006 |
KVM fixes for 6.9-rcN:
- Fix a mostly benign bug in the gfn_to_pfn_cache infrastructure where KVM
would allow userspace to refresh the cache with a bogus GPA. The bug has
existed for quite some time, but was exposed by a new sanity check added in
6.9 (to ensure a cache is either GPA-based or HVA-based).
- Drop an unused param from gfn_to_pfn_cache_invalidate_start() that got left
behind during a 6.9 cleanup.
- Disable support for virtualizing adaptive PEBS, as KVM's implementation is
architecturally broken and can leak host LBRs to the guest.
- Fix a bug where KVM neglects to set the enable bits for general purpose
counters in PERF_GLOBAL_CTRL when initializing the virtual PMU. Both Intel
and AMD architectures require the bits to be set at RESET in order for v2
PMUs to be backwards compatible with software that was written for v1 PMUs,
i.e. for software that will never manually set the global enables.
- Disable LBR virtualization on CPUs that don't support LBR callstacks, as
KVM unconditionally uses PERF_SAMPLE_BRANCH_CALL_STACK when creating the
virtual LBR perf event, i.e. KVM will always fail to create LBR events on
such CPUs.
- Fix a math goof in x86's hugepage logic for KVM_SET_MEMORY_ATTRIBUTES that
results in an array overflow (detected by KASAN).
- Fix a flaw in the max_guest_memory selftest that results in it exhausting
the supply of ucall structures when run with more than 256 vCPUs.
- Mark KVM_MEM_READONLY as supported for RISC-V in set_memory_region_test.
- Fix a bug where KVM incorrectly thinks a TDP MMU root is an indirect shadow
root due KVM unnecessarily clobbering root_role.direct when userspace sets
guest CPUID.
- Fix a dirty logging bug in the where KVM fails to write-protect TDP MMU
SPTEs used for L2 if Page-Modification Logging is enabled for L1 and the L1
hypervisor is NOT using EPT (if nEPT is enabled, KVM doesn't use the TDP MMU
to run L2). For simplicity, KVM always disables PML when running L2, but
the TDP MMU wasn't accounting for root-specific conditions that force write-
protect based dirty logging.
-----BEGIN PGP SIGNATURE-----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=0hRN
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-fixes-6.9-rcN' of https://github.com/kvm-x86/linux into HEAD
- Fix a mostly benign bug in the gfn_to_pfn_cache infrastructure where KVM
would allow userspace to refresh the cache with a bogus GPA. The bug has
existed for quite some time, but was exposed by a new sanity check added in
6.9 (to ensure a cache is either GPA-based or HVA-based).
- Drop an unused param from gfn_to_pfn_cache_invalidate_start() that got left
behind during a 6.9 cleanup.
- Disable support for virtualizing adaptive PEBS, as KVM's implementation is
architecturally broken and can leak host LBRs to the guest.
- Fix a bug where KVM neglects to set the enable bits for general purpose
counters in PERF_GLOBAL_CTRL when initializing the virtual PMU. Both Intel
and AMD architectures require the bits to be set at RESET in order for v2
PMUs to be backwards compatible with software that was written for v1 PMUs,
i.e. for software that will never manually set the global enables.
- Disable LBR virtualization on CPUs that don't support LBR callstacks, as
KVM unconditionally uses PERF_SAMPLE_BRANCH_CALL_STACK when creating the
virtual LBR perf event, i.e. KVM will always fail to create LBR events on
such CPUs.
- Fix a math goof in x86's hugepage logic for KVM_SET_MEMORY_ATTRIBUTES that
results in an array overflow (detected by KASAN).
- Fix a flaw in the max_guest_memory selftest that results in it exhausting
the supply of ucall structures when run with more than 256 vCPUs.
- Mark KVM_MEM_READONLY as supported for RISC-V in set_memory_region_test.
- Fix a bug where KVM incorrectly thinks a TDP MMU root is an indirect shadow
root due KVM unnecessarily clobbering root_role.direct when userspace sets
guest CPUID.
- Fix a dirty logging bug in the where KVM fails to write-protect TDP MMU
SPTEs used for L2 if Page-Modification Logging is enabled for L1 and the L1
hypervisor is NOT using EPT (if nEPT is enabled, KVM doesn't use the TDP MMU
to run L2). For simplicity, KVM always disables PML when running L2, but
the TDP MMU wasn't accounting for root-specific conditions that force write-
protect based dirty logging.
|
||
|
Sean Christopherson
|
1bc26cb909 |
KVM: x86/mmu: Precisely invalidate MMU root_role during CPUID update
Set kvm_mmu_page_role.invalid to mark the various MMU root_roles invalid during CPUID update in order to force a refresh, instead of zeroing out the entire role. This fixes a bug where kvm_mmu_free_roots() incorrectly thinks a root is indirect, i.e. not a TDP MMU, due to "direct" being zeroed, which in turn causes KVM to take mmu_lock for write instead of read. Note, paving over the entire role was largely unintentional, commit |
||
|
Paolo Bonzini
|
f3b65bbaed |
KVM: delete .change_pte MMU notifier callback
The .change_pte() MMU notifier callback was intended as an
optimization. The original point of it was that KSM could tell KVM to flip
its secondary PTE to a new location without having to first zap it. At
the time there was also an .invalidate_page() callback; both of them were
*not* bracketed by calls to mmu_notifier_invalidate_range_{start,end}(),
and .invalidate_page() also doubled as a fallback implementation of
.change_pte().
Later on, however, both callbacks were changed to occur within an
invalidate_range_start/end() block.
In the case of .change_pte(), commit
|
||
|
Sean Christopherson
|
fd706c9b16 |
KVM: x86: Snapshot if a vCPU's vendor model is AMD vs. Intel compatible
Add kvm_vcpu_arch.is_amd_compatible to cache if a vCPU's vendor model is compatible with AMD, i.e. if the vCPU vendor is AMD or Hygon, along with helpers to check if a vCPU is compatible AMD vs. Intel. To handle Intel vs. AMD behavior related to masking the LVTPC entry, KVM will need to check for vendor compatibility on every PMI injection, i.e. querying for AMD will soon be a moderately hot path. Note! This subtly (or maybe not-so-subtly) makes "Intel compatible" KVM's default behavior, both if userspace omits (or never sets) CPUID 0x0 and if userspace sets a completely unknown vendor. One could argue that KVM should treat such vCPUs as not being compatible with Intel *or* AMD, but that would add useless complexity to KVM. KVM needs to do *something* in the face of vendor specific behavior, and so unless KVM conjured up a magic third option, choosing to treat unknown vendors as neither Intel nor AMD means that checks on AMD compatibility would yield Intel behavior, and checks for Intel compatibility would yield AMD behavior. And that's far worse as it would effectively yield random behavior depending on whether KVM checked for AMD vs. Intel vs. !AMD vs. !Intel. And practically speaking, all x86 CPUs follow either Intel or AMD architecture, i.e. "supporting" an unknown third architecture adds no value. Deliberately don't convert any of the existing guest_cpuid_is_intel() checks, as the Intel side of things is messier due to some flows explicitly checking for exactly vendor==Intel, versus some flows assuming anything that isn't "AMD compatible" gets Intel behavior. The Intel code will be cleaned up in the future. Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com> Message-ID: <20240405235603.1173076-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Gerd Hoffmann
|
b628cb523c |
KVM: x86: Advertise max mappable GPA in CPUID.0x80000008.GuestPhysBits
Use the GuestPhysBits field in CPUID.0x80000008 to communicate the max mappable GPA to userspace, i.e. the max GPA that is addressable by the CPU itself. Typically this is identical to the max effective GPA, except in the case where the CPU supports MAXPHYADDR > 48 but does not support 5-level TDP (the CPU consults bits 51:48 of the GPA only when walking the fifth level TDP page table entry). Enumerating the max mappable GPA via CPUID will allow guest firmware to map resources like PCI bars in the highest possible address space, while ensuring that the GPA is addressable by the CPU. Without precise knowledge about the max mappable GPA, the guest must assume that 5-level paging is unsupported and thus restrict its mappings to the lower 48 bits. Advertise the max mappable GPA via KVM_GET_SUPPORTED_CPUID as userspace doesn't have easy access to whether or not 5-level paging is supported, and to play nice with userspace VMMs that reflect the supported CPUID directly into the guest. AMD's APM (3.35) defines GuestPhysBits (EAX[23:16]) as: Maximum guest physical address size in bits. This number applies only to guests using nested paging. When this field is zero, refer to the PhysAddrSize field for the maximum guest physical address size. Tom Lendacky confirmed that the purpose of GuestPhysBits is software use and KVM can use it as described above. Real hardware always returns zero. Leave GuestPhysBits as '0' when TDP is disabled in order to comply with the APM's statement that GuestPhysBits "applies only to guest using nested paging". As above, guest firmware will likely create suboptimal mappings, but that is a very minor issue and not a functional concern. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com> Link: https://lore.kernel.org/r/20240313125844.912415-3-kraxel@redhat.com [sean: massage changelog] Signed-off-by: Sean Christopherson <seanjc@google.com> |
||
|
Rick Edgecombe
|
992b54bd08 |
KVM: x86/mmu: x86: Don't overflow lpage_info when checking attributes
Fix KVM_SET_MEMORY_ATTRIBUTES to not overflow lpage_info array and trigger
KASAN splat, as seen in the private_mem_conversions_test selftest.
When memory attributes are set on a GFN range, that range will have
specific properties applied to the TDP. A huge page cannot be used when
the attributes are inconsistent, so they are disabled for those the
specific huge pages. For internal KVM reasons, huge pages are also not
allowed to span adjacent memslots regardless of whether the backing memory
could be mapped as huge.
What GFNs support which huge page sizes is tracked by an array of arrays
'lpage_info' on the memslot, of ‘kvm_lpage_info’ structs. Each index of
lpage_info contains a vmalloc allocated array of these for a specific
supported page size. The kvm_lpage_info denotes whether a specific huge
page (GFN and page size) on the memslot is supported. These arrays include
indices for unaligned head and tail huge pages.
Preventing huge pages from spanning adjacent memslot is covered by
incrementing the count in head and tail kvm_lpage_info when the memslot is
allocated, but disallowing huge pages for memory that has mixed attributes
has to be done in a more complicated way. During the
KVM_SET_MEMORY_ATTRIBUTES ioctl KVM updates lpage_info for each memslot in
the range that has mismatched attributes. KVM does this a memslot at a
time, and marks a special bit, KVM_LPAGE_MIXED_FLAG, in the kvm_lpage_info
for any huge page. This bit is essentially a permanently elevated count.
So huge pages will not be mapped for the GFN at that page size if the
count is elevated in either case: a huge head or tail page unaligned to
the memslot or if KVM_LPAGE_MIXED_FLAG is set because it has mixed
attributes.
To determine whether a huge page has consistent attributes, the
KVM_SET_MEMORY_ATTRIBUTES operation checks an xarray to make sure it
consistently has the incoming attribute. Since level - 1 huge pages are
aligned to level huge pages, it employs an optimization. As long as the
level - 1 huge pages are checked first, it can just check these and assume
that if each level - 1 huge page contained within the level sized huge
page is not mixed, then the level size huge page is not mixed. This
optimization happens in the helper hugepage_has_attrs().
Unfortunately, although the kvm_lpage_info array representing page size
'level' will contain an entry for an unaligned tail page of size level,
the array for level - 1 will not contain an entry for each GFN at page
size level. The level - 1 array will only contain an index for any
unaligned region covered by level - 1 huge page size, which can be a
smaller region. So this causes the optimization to overflow the level - 1
kvm_lpage_info and perform a vmalloc out of bounds read.
In some cases of head and tail pages where an overflow could happen,
callers skip the operation completely as KVM_LPAGE_MIXED_FLAG is not
required to prevent huge pages as discussed earlier. But for memslots that
are smaller than the 1GB page size, it does call hugepage_has_attrs(). In
this case the huge page is both the head and tail page. The issue can be
observed simply by compiling the kernel with CONFIG_KASAN_VMALLOC and
running the selftest “private_mem_conversions_test”, which produces the
output like the following:
BUG: KASAN: vmalloc-out-of-bounds in hugepage_has_attrs+0x7e/0x110
Read of size 4 at addr ffffc900000a3008 by task private_mem_con/169
Call Trace:
dump_stack_lvl
print_report
? __virt_addr_valid
? hugepage_has_attrs
? hugepage_has_attrs
kasan_report
? hugepage_has_attrs
hugepage_has_attrs
kvm_arch_post_set_memory_attributes
kvm_vm_ioctl
It is a little ambiguous whether the unaligned head page (in the bug case
also the tail page) should be expected to have KVM_LPAGE_MIXED_FLAG set.
It is not functionally required, as the unaligned head/tail pages will
already have their kvm_lpage_info count incremented. The comments imply
not setting it on unaligned head pages is intentional, so fix the callers
to skip trying to set KVM_LPAGE_MIXED_FLAG in this case, and in doing so
not call hugepage_has_attrs().
Cc: stable@vger.kernel.org
Fixes:
|
||
|
Linus Torvalds
|
4f712ee0cb |
S390:
* Changes to FPU handling came in via the main s390 pull request
* Only deliver to the guest the SCLP events that userspace has
requested.
* More virtual vs physical address fixes (only a cleanup since
virtual and physical address spaces are currently the same).
* Fix selftests undefined behavior.
x86:
* Fix a restriction that the guest can't program a PMU event whose
encoding matches an architectural event that isn't included in the
guest CPUID. The enumeration of an architectural event only says
that if a CPU supports an architectural event, then the event can be
programmed *using the architectural encoding*. The enumeration does
NOT say anything about the encoding when the CPU doesn't report support
the event *in general*. It might support it, and it might support it
using the same encoding that made it into the architectural PMU spec.
* Fix a variety of bugs in KVM's emulation of RDPMC (more details on
individual commits) and add a selftest to verify KVM correctly emulates
RDMPC, counter availability, and a variety of other PMC-related
behaviors that depend on guest CPUID and therefore are easier to
validate with selftests than with custom guests (aka kvm-unit-tests).
* Zero out PMU state on AMD if the virtual PMU is disabled, it does not
cause any bug but it wastes time in various cases where KVM would check
if a PMC event needs to be synthesized.
* Optimize triggering of emulated events, with a nice ~10% performance
improvement in VM-Exit microbenchmarks when a vPMU is exposed to the
guest.
* Tighten the check for "PMI in guest" to reduce false positives if an NMI
arrives in the host while KVM is handling an IRQ VM-Exit.
* Fix a bug where KVM would report stale/bogus exit qualification information
when exiting to userspace with an internal error exit code.
* Add a VMX flag in /proc/cpuinfo to report 5-level EPT support.
* Rework TDP MMU root unload, free, and alloc to run with mmu_lock held for
read, e.g. to avoid serializing vCPUs when userspace deletes a memslot.
* Tear down TDP MMU page tables at 4KiB granularity (used to be 1GiB). KVM
doesn't support yielding in the middle of processing a zap, and 1GiB
granularity resulted in multi-millisecond lags that are quite impolite
for CONFIG_PREEMPT kernels.
* Allocate write-tracking metadata on-demand to avoid the memory overhead when
a kernel is built with i915 virtualization support but the workloads use
neither shadow paging nor i915 virtualization.
* Explicitly initialize a variety of on-stack variables in the emulator that
triggered KMSAN false positives.
* Fix the debugregs ABI for 32-bit KVM.
* Rework the "force immediate exit" code so that vendor code ultimately decides
how and when to force the exit, which allowed some optimization for both
Intel and AMD.
* Fix a long-standing bug where kvm_has_noapic_vcpu could be left elevated if
vCPU creation ultimately failed, causing extra unnecessary work.
* Cleanup the logic for checking if the currently loaded vCPU is in-kernel.
* Harden against underflowing the active mmu_notifier invalidation
count, so that "bad" invalidations (usually due to bugs elsehwere in the
kernel) are detected earlier and are less likely to hang the kernel.
x86 Xen emulation:
* Overlay pages can now be cached based on host virtual address,
instead of guest physical addresses. This removes the need to
reconfigure and invalidate the cache if the guest changes the
gpa but the underlying host virtual address remains the same.
* When possible, use a single host TSC value when computing the deadline for
Xen timers in order to improve the accuracy of the timer emulation.
* Inject pending upcall events when the vCPU software-enables its APIC to fix
a bug where an upcall can be lost (and to follow Xen's behavior).
* Fall back to the slow path instead of warning if "fast" IRQ delivery of Xen
events fails, e.g. if the guest has aliased xAPIC IDs.
RISC-V:
* Support exception and interrupt handling in selftests
* New self test for RISC-V architectural timer (Sstc extension)
* New extension support (Ztso, Zacas)
* Support userspace emulation of random number seed CSRs.
ARM:
* Infrastructure for building KVM's trap configuration based on the
architectural features (or lack thereof) advertised in the VM's ID
registers
* Support for mapping vfio-pci BARs as Normal-NC (vaguely similar to
x86's WC) at stage-2, improving the performance of interacting with
assigned devices that can tolerate it
* Conversion of KVM's representation of LPIs to an xarray, utilized to
address serialization some of the serialization on the LPI injection
path
* Support for _architectural_ VHE-only systems, advertised through the
absence of FEAT_E2H0 in the CPU's ID register
* Miscellaneous cleanups, fixes, and spelling corrections to KVM and
selftests
LoongArch:
* Set reserved bits as zero in CPUCFG.
* Start SW timer only when vcpu is blocking.
* Do not restart SW timer when it is expired.
* Remove unnecessary CSR register saving during enter guest.
* Misc cleanups and fixes as usual.
Generic:
* cleanup Kconfig by removing CONFIG_HAVE_KVM, which was basically always
true on all architectures except MIPS (where Kconfig determines the
available depending on CPU capabilities). It is replaced either by
an architecture-dependent symbol for MIPS, and IS_ENABLED(CONFIG_KVM)
everywhere else.
* Factor common "select" statements in common code instead of requiring
each architecture to specify it
* Remove thoroughly obsolete APIs from the uapi headers.
* Move architecture-dependent stuff to uapi/asm/kvm.h
* Always flush the async page fault workqueue when a work item is being
removed, especially during vCPU destruction, to ensure that there are no
workers running in KVM code when all references to KVM-the-module are gone,
i.e. to prevent a very unlikely use-after-free if kvm.ko is unloaded.
* Grab a reference to the VM's mm_struct in the async #PF worker itself instead
of gifting the worker a reference, so that there's no need to remember
to *conditionally* clean up after the worker.
Selftests:
* Reduce boilerplate especially when utilize selftest TAP infrastructure.
* Add basic smoke tests for SEV and SEV-ES, along with a pile of library
support for handling private/encrypted/protected memory.
* Fix benign bugs where tests neglect to close() guest_memfd files.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmX0iP8UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroND7wf+JZoNvwZ+bmwWe/4jn/YwNoYi/C5z
eypn8M1gsWEccpCpqPBwznVm9T29rF4uOlcMvqLEkHfTpaL1EKUUjP1lXPz/ileP
6a2RdOGxAhyTiFC9fjy+wkkjtLbn1kZf6YsS0hjphP9+w0chNbdn0w81dFVnXryd
j7XYI8R/bFAthNsJOuZXSEjCfIHxvTTG74OrTf1B1FEBB+arPmrgUeJftMVhffQK
Sowgg8L/Ii/x6fgV5NZQVSIyVf1rp8z7c6UaHT4Fwb0+RAMW8p9pYv9Qp1YkKp8y
5j0V9UzOHP7FRaYimZ5BtwQoqiZXYylQ+VuU/Y2f4X85cvlLzSqxaEMAPA==
=mqOV
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"S390:
- Changes to FPU handling came in via the main s390 pull request
- Only deliver to the guest the SCLP events that userspace has
requested
- More virtual vs physical address fixes (only a cleanup since
virtual and physical address spaces are currently the same)
- Fix selftests undefined behavior
x86:
- Fix a restriction that the guest can't program a PMU event whose
encoding matches an architectural event that isn't included in the
guest CPUID. The enumeration of an architectural event only says
that if a CPU supports an architectural event, then the event can
be programmed *using the architectural encoding*. The enumeration
does NOT say anything about the encoding when the CPU doesn't
report support the event *in general*. It might support it, and it
might support it using the same encoding that made it into the
architectural PMU spec
- Fix a variety of bugs in KVM's emulation of RDPMC (more details on
individual commits) and add a selftest to verify KVM correctly
emulates RDMPC, counter availability, and a variety of other
PMC-related behaviors that depend on guest CPUID and therefore are
easier to validate with selftests than with custom guests (aka
kvm-unit-tests)
- Zero out PMU state on AMD if the virtual PMU is disabled, it does
not cause any bug but it wastes time in various cases where KVM
would check if a PMC event needs to be synthesized
- Optimize triggering of emulated events, with a nice ~10%
performance improvement in VM-Exit microbenchmarks when a vPMU is
exposed to the guest
- Tighten the check for "PMI in guest" to reduce false positives if
an NMI arrives in the host while KVM is handling an IRQ VM-Exit
- Fix a bug where KVM would report stale/bogus exit qualification
information when exiting to userspace with an internal error exit
code
- Add a VMX flag in /proc/cpuinfo to report 5-level EPT support
- Rework TDP MMU root unload, free, and alloc to run with mmu_lock
held for read, e.g. to avoid serializing vCPUs when userspace
deletes a memslot
- Tear down TDP MMU page tables at 4KiB granularity (used to be
1GiB). KVM doesn't support yielding in the middle of processing a
zap, and 1GiB granularity resulted in multi-millisecond lags that
are quite impolite for CONFIG_PREEMPT kernels
- Allocate write-tracking metadata on-demand to avoid the memory
overhead when a kernel is built with i915 virtualization support
but the workloads use neither shadow paging nor i915 virtualization
- Explicitly initialize a variety of on-stack variables in the
emulator that triggered KMSAN false positives
- Fix the debugregs ABI for 32-bit KVM
- Rework the "force immediate exit" code so that vendor code
ultimately decides how and when to force the exit, which allowed
some optimization for both Intel and AMD
- Fix a long-standing bug where kvm_has_noapic_vcpu could be left
elevated if vCPU creation ultimately failed, causing extra
unnecessary work
- Cleanup the logic for checking if the currently loaded vCPU is
in-kernel
- Harden against underflowing the active mmu_notifier invalidation
count, so that "bad" invalidations (usually due to bugs elsehwere
in the kernel) are detected earlier and are less likely to hang the
kernel
x86 Xen emulation:
- Overlay pages can now be cached based on host virtual address,
instead of guest physical addresses. This removes the need to
reconfigure and invalidate the cache if the guest changes the gpa
but the underlying host virtual address remains the same
- When possible, use a single host TSC value when computing the
deadline for Xen timers in order to improve the accuracy of the
timer emulation
- Inject pending upcall events when the vCPU software-enables its
APIC to fix a bug where an upcall can be lost (and to follow Xen's
behavior)
- Fall back to the slow path instead of warning if "fast" IRQ
delivery of Xen events fails, e.g. if the guest has aliased xAPIC
IDs
RISC-V:
- Support exception and interrupt handling in selftests
- New self test for RISC-V architectural timer (Sstc extension)
- New extension support (Ztso, Zacas)
- Support userspace emulation of random number seed CSRs
ARM:
- Infrastructure for building KVM's trap configuration based on the
architectural features (or lack thereof) advertised in the VM's ID
registers
- Support for mapping vfio-pci BARs as Normal-NC (vaguely similar to
x86's WC) at stage-2, improving the performance of interacting with
assigned devices that can tolerate it
- Conversion of KVM's representation of LPIs to an xarray, utilized
to address serialization some of the serialization on the LPI
injection path
- Support for _architectural_ VHE-only systems, advertised through
the absence of FEAT_E2H0 in the CPU's ID register
- Miscellaneous cleanups, fixes, and spelling corrections to KVM and
selftests
LoongArch:
- Set reserved bits as zero in CPUCFG
- Start SW timer only when vcpu is blocking
- Do not restart SW timer when it is expired
- Remove unnecessary CSR register saving during enter guest
- Misc cleanups and fixes as usual
Generic:
- Clean up Kconfig by removing CONFIG_HAVE_KVM, which was basically
always true on all architectures except MIPS (where Kconfig
determines the available depending on CPU capabilities). It is
replaced either by an architecture-dependent symbol for MIPS, and
IS_ENABLED(CONFIG_KVM) everywhere else
- Factor common "select" statements in common code instead of
requiring each architecture to specify it
- Remove thoroughly obsolete APIs from the uapi headers
- Move architecture-dependent stuff to uapi/asm/kvm.h
- Always flush the async page fault workqueue when a work item is
being removed, especially during vCPU destruction, to ensure that
there are no workers running in KVM code when all references to
KVM-the-module are gone, i.e. to prevent a very unlikely
use-after-free if kvm.ko is unloaded
- Grab a reference to the VM's mm_struct in the async #PF worker
itself instead of gifting the worker a reference, so that there's
no need to remember to *conditionally* clean up after the worker
Selftests:
- Reduce boilerplate especially when utilize selftest TAP
infrastructure
- Add basic smoke tests for SEV and SEV-ES, along with a pile of
library support for handling private/encrypted/protected memory
- Fix benign bugs where tests neglect to close() guest_memfd files"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (246 commits)
selftests: kvm: remove meaningless assignments in Makefiles
KVM: riscv: selftests: Add Zacas extension to get-reg-list test
RISC-V: KVM: Allow Zacas extension for Guest/VM
KVM: riscv: selftests: Add Ztso extension to get-reg-list test
RISC-V: KVM: Allow Ztso extension for Guest/VM
RISC-V: KVM: Forward SEED CSR access to user space
KVM: riscv: selftests: Add sstc timer test
KVM: riscv: selftests: Change vcpu_has_ext to a common function
KVM: riscv: selftests: Add guest helper to get vcpu id
KVM: riscv: selftests: Add exception handling support
LoongArch: KVM: Remove unnecessary CSR register saving during enter guest
LoongArch: KVM: Do not restart SW timer when it is expired
LoongArch: KVM: Start SW timer only when vcpu is blocking
LoongArch: KVM: Set reserved bits as zero in CPUCFG
KVM: selftests: Explicitly close guest_memfd files in some gmem tests
KVM: x86/xen: fix recursive deadlock in timer injection
KVM: pfncache: simplify locking and make more self-contained
KVM: x86/xen: remove WARN_ON_ONCE() with false positives in evtchn delivery
KVM: x86/xen: inject vCPU upcall vector when local APIC is enabled
KVM: x86/xen: improve accuracy of Xen timers
...
|
||
|
Linus Torvalds
|
902861e34c |
- Sumanth Korikkar has taught s390 to allocate hotplug-time page frames
from hotplugged memory rather than only from main memory. Series
"implement "memmap on memory" feature on s390".
- More folio conversions from Matthew Wilcox in the series
"Convert memcontrol charge moving to use folios"
"mm: convert mm counter to take a folio"
- Chengming Zhou has optimized zswap's rbtree locking, providing
significant reductions in system time and modest but measurable
reductions in overall runtimes. The series is "mm/zswap: optimize the
scalability of zswap rb-tree".
- Chengming Zhou has also provided the series "mm/zswap: optimize zswap
lru list" which provides measurable runtime benefits in some
swap-intensive situations.
- And Chengming Zhou further optimizes zswap in the series "mm/zswap:
optimize for dynamic zswap_pools". Measured improvements are modest.
- zswap cleanups and simplifications from Yosry Ahmed in the series "mm:
zswap: simplify zswap_swapoff()".
- In the series "Add DAX ABI for memmap_on_memory", Vishal Verma has
contributed several DAX cleanups as well as adding a sysfs tunable to
control the memmap_on_memory setting when the dax device is hotplugged
as system memory.
- Johannes Weiner has added the large series "mm: zswap: cleanups",
which does that.
- More DAMON work from SeongJae Park in the series
"mm/damon: make DAMON debugfs interface deprecation unignorable"
"selftests/damon: add more tests for core functionalities and corner cases"
"Docs/mm/damon: misc readability improvements"
"mm/damon: let DAMOS feeds and tame/auto-tune itself"
- In the series "mm/mempolicy: weighted interleave mempolicy and sysfs
extension" Rakie Kim has developed a new mempolicy interleaving policy
wherein we allocate memory across nodes in a weighted fashion rather
than uniformly. This is beneficial in heterogeneous memory environments
appearing with CXL.
- Christophe Leroy has contributed some cleanup and consolidation work
against the ARM pagetable dumping code in the series "mm: ptdump:
Refactor CONFIG_DEBUG_WX and check_wx_pages debugfs attribute".
- Luis Chamberlain has added some additional xarray selftesting in the
series "test_xarray: advanced API multi-index tests".
- Muhammad Usama Anjum has reworked the selftest code to make its
human-readable output conform to the TAP ("Test Anything Protocol")
format. Amongst other things, this opens up the use of third-party
tools to parse and process out selftesting results.
- Ryan Roberts has added fork()-time PTE batching of THP ptes in the
series "mm/memory: optimize fork() with PTE-mapped THP". Mainly
targeted at arm64, this significantly speeds up fork() when the process
has a large number of pte-mapped folios.
- David Hildenbrand also gets in on the THP pte batching game in his
series "mm/memory: optimize unmap/zap with PTE-mapped THP". It
implements batching during munmap() and other pte teardown situations.
The microbenchmark improvements are nice.
- And in the series "Transparent Contiguous PTEs for User Mappings" Ryan
Roberts further utilizes arm's pte's contiguous bit ("contpte
mappings"). Kernel build times on arm64 improved nicely. Ryan's series
"Address some contpte nits" provides some followup work.
- In the series "mm/hugetlb: Restore the reservation" Breno Leitao has
fixed an obscure hugetlb race which was causing unnecessary page faults.
He has also added a reproducer under the selftest code.
- In the series "selftests/mm: Output cleanups for the compaction test",
Mark Brown did what the title claims.
- Kinsey Ho has added the series "mm/mglru: code cleanup and refactoring".
- Even more zswap material from Nhat Pham. The series "fix and extend
zswap kselftests" does as claimed.
- In the series "Introduce cpu_dcache_is_aliasing() to fix DAX
regression" Mathieu Desnoyers has cleaned up and fixed rather a mess in
our handling of DAX on archiecctures which have virtually aliasing data
caches. The arm architecture is the main beneficiary.
- Lokesh Gidra's series "per-vma locks in userfaultfd" provides dramatic
improvements in worst-case mmap_lock hold times during certain
userfaultfd operations.
- Some page_owner enhancements and maintenance work from Oscar Salvador
in his series
"page_owner: print stacks and their outstanding allocations"
"page_owner: Fixup and cleanup"
- Uladzislau Rezki has contributed some vmalloc scalability improvements
in his series "Mitigate a vmap lock contention". It realizes a 12x
improvement for a certain microbenchmark.
- Some kexec/crash cleanup work from Baoquan He in the series "Split
crash out from kexec and clean up related config items".
- Some zsmalloc maintenance work from Chengming Zhou in the series
"mm/zsmalloc: fix and optimize objects/page migration"
"mm/zsmalloc: some cleanup for get/set_zspage_mapping()"
- Zi Yan has taught the MM to perform compaction on folios larger than
order=0. This a step along the path to implementaton of the merging of
large anonymous folios. The series is named "Enable >0 order folio
memory compaction".
- Christoph Hellwig has done quite a lot of cleanup work in the
pagecache writeback code in his series "convert write_cache_pages() to
an iterator".
- Some modest hugetlb cleanups and speedups in Vishal Moola's series
"Handle hugetlb faults under the VMA lock".
- Zi Yan has changed the page splitting code so we can split huge pages
into sizes other than order-0 to better utilize large folios. The
series is named "Split a folio to any lower order folios".
- David Hildenbrand has contributed the series "mm: remove
total_mapcount()", a cleanup.
- Matthew Wilcox has sought to improve the performance of bulk memory
freeing in his series "Rearrange batched folio freeing".
- Gang Li's series "hugetlb: parallelize hugetlb page init on boot"
provides large improvements in bootup times on large machines which are
configured to use large numbers of hugetlb pages.
- Matthew Wilcox's series "PageFlags cleanups" does that.
- Qi Zheng's series "minor fixes and supplement for ptdesc" does that
also. S390 is affected.
- Cleanups to our pagemap utility functions from Peter Xu in his series
"mm/treewide: Replace pXd_large() with pXd_leaf()".
- Nico Pache has fixed a few things with our hugepage selftests in his
series "selftests/mm: Improve Hugepage Test Handling in MM Selftests".
- Also, of course, many singleton patches to many things. Please see
the individual changelogs for details.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZfJpPQAKCRDdBJ7gKXxA
joxeAP9TrcMEuHnLmBlhIXkWbIR4+ki+pA3v+gNTlJiBhnfVSgD9G55t1aBaRplx
TMNhHfyiHYDTx/GAV9NXW84tasJSDgA=
=TG55
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2024-03-13-20-04' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Sumanth Korikkar has taught s390 to allocate hotplug-time page frames
from hotplugged memory rather than only from main memory. Series
"implement "memmap on memory" feature on s390".
- More folio conversions from Matthew Wilcox in the series
"Convert memcontrol charge moving to use folios"
"mm: convert mm counter to take a folio"
- Chengming Zhou has optimized zswap's rbtree locking, providing
significant reductions in system time and modest but measurable
reductions in overall runtimes. The series is "mm/zswap: optimize the
scalability of zswap rb-tree".
- Chengming Zhou has also provided the series "mm/zswap: optimize zswap
lru list" which provides measurable runtime benefits in some
swap-intensive situations.
- And Chengming Zhou further optimizes zswap in the series "mm/zswap:
optimize for dynamic zswap_pools". Measured improvements are modest.
- zswap cleanups and simplifications from Yosry Ahmed in the series
"mm: zswap: simplify zswap_swapoff()".
- In the series "Add DAX ABI for memmap_on_memory", Vishal Verma has
contributed several DAX cleanups as well as adding a sysfs tunable to
control the memmap_on_memory setting when the dax device is
hotplugged as system memory.
- Johannes Weiner has added the large series "mm: zswap: cleanups",
which does that.
- More DAMON work from SeongJae Park in the series
"mm/damon: make DAMON debugfs interface deprecation unignorable"
"selftests/damon: add more tests for core functionalities and corner cases"
"Docs/mm/damon: misc readability improvements"
"mm/damon: let DAMOS feeds and tame/auto-tune itself"
- In the series "mm/mempolicy: weighted interleave mempolicy and sysfs
extension" Rakie Kim has developed a new mempolicy interleaving
policy wherein we allocate memory across nodes in a weighted fashion
rather than uniformly. This is beneficial in heterogeneous memory
environments appearing with CXL.
- Christophe Leroy has contributed some cleanup and consolidation work
against the ARM pagetable dumping code in the series "mm: ptdump:
Refactor CONFIG_DEBUG_WX and check_wx_pages debugfs attribute".
- Luis Chamberlain has added some additional xarray selftesting in the
series "test_xarray: advanced API multi-index tests".
- Muhammad Usama Anjum has reworked the selftest code to make its
human-readable output conform to the TAP ("Test Anything Protocol")
format. Amongst other things, this opens up the use of third-party
tools to parse and process out selftesting results.
- Ryan Roberts has added fork()-time PTE batching of THP ptes in the
series "mm/memory: optimize fork() with PTE-mapped THP". Mainly
targeted at arm64, this significantly speeds up fork() when the
process has a large number of pte-mapped folios.
- David Hildenbrand also gets in on the THP pte batching game in his
series "mm/memory: optimize unmap/zap with PTE-mapped THP". It
implements batching during munmap() and other pte teardown
situations. The microbenchmark improvements are nice.
- And in the series "Transparent Contiguous PTEs for User Mappings"
Ryan Roberts further utilizes arm's pte's contiguous bit ("contpte
mappings"). Kernel build times on arm64 improved nicely. Ryan's
series "Address some contpte nits" provides some followup work.
- In the series "mm/hugetlb: Restore the reservation" Breno Leitao has
fixed an obscure hugetlb race which was causing unnecessary page
faults. He has also added a reproducer under the selftest code.
- In the series "selftests/mm: Output cleanups for the compaction
test", Mark Brown did what the title claims.
- Kinsey Ho has added the series "mm/mglru: code cleanup and
refactoring".
- Even more zswap material from Nhat Pham. The series "fix and extend
zswap kselftests" does as claimed.
- In the series "Introduce cpu_dcache_is_aliasing() to fix DAX
regression" Mathieu Desnoyers has cleaned up and fixed rather a mess
in our handling of DAX on archiecctures which have virtually aliasing
data caches. The arm architecture is the main beneficiary.
- Lokesh Gidra's series "per-vma locks in userfaultfd" provides
dramatic improvements in worst-case mmap_lock hold times during
certain userfaultfd operations.
- Some page_owner enhancements and maintenance work from Oscar Salvador
in his series
"page_owner: print stacks and their outstanding allocations"
"page_owner: Fixup and cleanup"
- Uladzislau Rezki has contributed some vmalloc scalability
improvements in his series "Mitigate a vmap lock contention". It
realizes a 12x improvement for a certain microbenchmark.
- Some kexec/crash cleanup work from Baoquan He in the series "Split
crash out from kexec and clean up related config items".
- Some zsmalloc maintenance work from Chengming Zhou in the series
"mm/zsmalloc: fix and optimize objects/page migration"
"mm/zsmalloc: some cleanup for get/set_zspage_mapping()"
- Zi Yan has taught the MM to perform compaction on folios larger than
order=0. This a step along the path to implementaton of the merging
of large anonymous folios. The series is named "Enable >0 order folio
memory compaction".
- Christoph Hellwig has done quite a lot of cleanup work in the
pagecache writeback code in his series "convert write_cache_pages()
to an iterator".
- Some modest hugetlb cleanups and speedups in Vishal Moola's series
"Handle hugetlb faults under the VMA lock".
- Zi Yan has changed the page splitting code so we can split huge pages
into sizes other than order-0 to better utilize large folios. The
series is named "Split a folio to any lower order folios".
- David Hildenbrand has contributed the series "mm: remove
total_mapcount()", a cleanup.
- Matthew Wilcox has sought to improve the performance of bulk memory
freeing in his series "Rearrange batched folio freeing".
- Gang Li's series "hugetlb: parallelize hugetlb page init on boot"
provides large improvements in bootup times on large machines which
are configured to use large numbers of hugetlb pages.
- Matthew Wilcox's series "PageFlags cleanups" does that.
- Qi Zheng's series "minor fixes and supplement for ptdesc" does that
also. S390 is affected.
- Cleanups to our pagemap utility functions from Peter Xu in his series
"mm/treewide: Replace pXd_large() with pXd_leaf()".
- Nico Pache has fixed a few things with our hugepage selftests in his
series "selftests/mm: Improve Hugepage Test Handling in MM
Selftests".
- Also, of course, many singleton patches to many things. Please see
the individual changelogs for details.
* tag 'mm-stable-2024-03-13-20-04' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (435 commits)
mm/zswap: remove the memcpy if acomp is not sleepable
crypto: introduce: acomp_is_async to expose if comp drivers might sleep
memtest: use {READ,WRITE}_ONCE in memory scanning
mm: prohibit the last subpage from reusing the entire large folio
mm: recover pud_leaf() definitions in nopmd case
selftests/mm: skip the hugetlb-madvise tests on unmet hugepage requirements
selftests/mm: skip uffd hugetlb tests with insufficient hugepages
selftests/mm: dont fail testsuite due to a lack of hugepages
mm/huge_memory: skip invalid debugfs new_order input for folio split
mm/huge_memory: check new folio order when split a folio
mm, vmscan: retry kswapd's priority loop with cache_trim_mode off on failure
mm: add an explicit smp_wmb() to UFFDIO_CONTINUE
mm: fix list corruption in put_pages_list
mm: remove folio from deferred split list before uncharging it
filemap: avoid unnecessary major faults in filemap_fault()
mm,page_owner: drop unnecessary check
mm,page_owner: check for null stack_record before bumping its refcount
mm: swap: fix race between free_swap_and_cache() and swapoff()
mm/treewide: align up pXd_leaf() retval across archs
mm/treewide: drop pXd_large()
...
|
||
|
Linus Torvalds
|
216532e147 |
hardening updates for v6.9-rc1
- string.h and related header cleanups (Tanzir Hasan, Andy Shevchenko)
- VMCI memcpy() usage and struct_size() cleanups (Vasiliy Kovalev, Harshit
Mogalapalli)
- selftests/powerpc: Fix load_unaligned_zeropad build failure (Michael
Ellerman)
- hardened Kconfig fragment updates (Marco Elver, Lukas Bulwahn)
- Handle tail call optimization better in LKDTM (Douglas Anderson)
- Use long form types in overflow.h (Andy Shevchenko)
- Add flags param to string_get_size() (Andy Shevchenko)
- Add Coccinelle script for potential struct_size() use (Jacob Keller)
- Fix objtool corner case under KCFI (Josh Poimboeuf)
- Drop 13 year old backward compat CAP_SYS_ADMIN check (Jingzi Meng)
- Add str_plural() helper (Michal Wajdeczko, Kees Cook)
- Ignore relocations in .notes section
- Add comments to explain how __is_constexpr() works
- Fix m68k stack alignment expectations in stackinit Kunit test
- Convert string selftests to KUnit
- Add KUnit tests for fortified string functions
- Improve reporting during fortified string warnings
- Allow non-type arg to type_max() and type_min()
- Allow strscpy() to be called with only 2 arguments
- Add binary mode to leaking_addresses scanner
- Various small cleanups to leaking_addresses scanner
- Adding wrapping_*() arithmetic helper
- Annotate initial signed integer wrap-around in refcount_t
- Add explicit UBSAN section to MAINTAINERS
- Fix UBSAN self-test warnings
- Simplify UBSAN build via removal of CONFIG_UBSAN_SANITIZE_ALL
- Reintroduce UBSAN's signed overflow sanitizer
-----BEGIN PGP SIGNATURE-----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=OP+o
-----END PGP SIGNATURE-----
Merge tag 'hardening-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"As is pretty normal for this tree, there are changes all over the
place, especially for small fixes, selftest improvements, and improved
macro usability.
Some header changes ended up landing via this tree as they depended on
the string header cleanups. Also, a notable set of changes is the work
for the reintroduction of the UBSAN signed integer overflow sanitizer
so that we can continue to make improvements on the compiler side to
make this sanitizer a more viable future security hardening option.
Summary:
- string.h and related header cleanups (Tanzir Hasan, Andy
Shevchenko)
- VMCI memcpy() usage and struct_size() cleanups (Vasiliy Kovalev,
Harshit Mogalapalli)
- selftests/powerpc: Fix load_unaligned_zeropad build failure
(Michael Ellerman)
- hardened Kconfig fragment updates (Marco Elver, Lukas Bulwahn)
- Handle tail call optimization better in LKDTM (Douglas Anderson)
- Use long form types in overflow.h (Andy Shevchenko)
- Add flags param to string_get_size() (Andy Shevchenko)
- Add Coccinelle script for potential struct_size() use (Jacob
Keller)
- Fix objtool corner case under KCFI (Josh Poimboeuf)
- Drop 13 year old backward compat CAP_SYS_ADMIN check (Jingzi Meng)
- Add str_plural() helper (Michal Wajdeczko, Kees Cook)
- Ignore relocations in .notes section
- Add comments to explain how __is_constexpr() works
- Fix m68k stack alignment expectations in stackinit Kunit test
- Convert string selftests to KUnit
- Add KUnit tests for fortified string functions
- Improve reporting during fortified string warnings
- Allow non-type arg to type_max() and type_min()
- Allow strscpy() to be called with only 2 arguments
- Add binary mode to leaking_addresses scanner
- Various small cleanups to leaking_addresses scanner
- Adding wrapping_*() arithmetic helper
- Annotate initial signed integer wrap-around in refcount_t
- Add explicit UBSAN section to MAINTAINERS
- Fix UBSAN self-test warnings
- Simplify UBSAN build via removal of CONFIG_UBSAN_SANITIZE_ALL
- Reintroduce UBSAN's signed overflow sanitizer"
* tag 'hardening-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (51 commits)
selftests/powerpc: Fix load_unaligned_zeropad build failure
string: Convert helpers selftest to KUnit
string: Convert selftest to KUnit
sh: Fix build with CONFIG_UBSAN=y
compiler.h: Explain how __is_constexpr() works
overflow: Allow non-type arg to type_max() and type_min()
VMCI: Fix possible memcpy() run-time warning in vmci_datagram_invoke_guest_handler()
lib/string_helpers: Add flags param to string_get_size()
x86, relocs: Ignore relocations in .notes section
objtool: Fix UNWIND_HINT_{SAVE,RESTORE} across basic blocks
overflow: Use POD in check_shl_overflow()
lib: stackinit: Adjust target string to 8 bytes for m68k
sparc: vdso: Disable UBSAN instrumentation
kernel.h: Move lib/cmdline.c prototypes to string.h
leaking_addresses: Provide mechanism to scan binary files
leaking_addresses: Ignore input device status lines
leaking_addresses: Use File::Temp for /tmp files
MAINTAINERS: Update LEAKING_ADDRESSES details
fortify: Improve buffer overflow reporting
fortify: Add KUnit tests for runtime overflows
...
|
||
|
Linus Torvalds
|
685d982112 |
Core x86 changes for v6.9:
- The biggest change is the rework of the percpu code,
to support the 'Named Address Spaces' GCC feature,
by Uros Bizjak:
- This allows C code to access GS and FS segment relative
memory via variables declared with such attributes,
which allows the compiler to better optimize those accesses
than the previous inline assembly code.
- The series also includes a number of micro-optimizations
for various percpu access methods, plus a number of
cleanups of %gs accesses in assembly code.
- These changes have been exposed to linux-next testing for
the last ~5 months, with no known regressions in this area.
- Fix/clean up __switch_to()'s broken but accidentally
working handling of FPU switching - which also generates
better code.
- Propagate more RIP-relative addressing in assembly code,
to generate slightly better code.
- Rework the CPU mitigations Kconfig space to be less idiosyncratic,
to make it easier for distros to follow & maintain these options.
- Rework the x86 idle code to cure RCU violations and
to clean up the logic.
- Clean up the vDSO Makefile logic.
- Misc cleanups and fixes.
[ Please note that there's a higher number of merge commits in
this branch (three) than is usual in x86 topic trees. This happened
due to the long testing lifecycle of the percpu changes that
involved 3 merge windows, which generated a longer history
and various interactions with other core x86 changes that we
felt better about to carry in a single branch. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=3v4F
-----END PGP SIGNATURE-----
Merge tag 'x86-core-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core x86 updates from Ingo Molnar:
- The biggest change is the rework of the percpu code, to support the
'Named Address Spaces' GCC feature, by Uros Bizjak:
- This allows C code to access GS and FS segment relative memory
via variables declared with such attributes, which allows the
compiler to better optimize those accesses than the previous
inline assembly code.
- The series also includes a number of micro-optimizations for
various percpu access methods, plus a number of cleanups of %gs
accesses in assembly code.
- These changes have been exposed to linux-next testing for the
last ~5 months, with no known regressions in this area.
- Fix/clean up __switch_to()'s broken but accidentally working handling
of FPU switching - which also generates better code
- Propagate more RIP-relative addressing in assembly code, to generate
slightly better code
- Rework the CPU mitigations Kconfig space to be less idiosyncratic, to
make it easier for distros to follow & maintain these options
- Rework the x86 idle code to cure RCU violations and to clean up the
logic
- Clean up the vDSO Makefile logic
- Misc cleanups and fixes
* tag 'x86-core-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
x86/idle: Select idle routine only once
x86/idle: Let prefer_mwait_c1_over_halt() return bool
x86/idle: Cleanup idle_setup()
x86/idle: Clean up idle selection
x86/idle: Sanitize X86_BUG_AMD_E400 handling
sched/idle: Conditionally handle tick broadcast in default_idle_call()
x86: Increase brk randomness entropy for 64-bit systems
x86/vdso: Move vDSO to mmap region
x86/vdso/kbuild: Group non-standard build attributes and primary object file rules together
x86/vdso: Fix rethunk patching for vdso-image-{32,64}.o
x86/retpoline: Ensure default return thunk isn't used at runtime
x86/vdso: Use CONFIG_COMPAT_32 to specify vdso32
x86/vdso: Use $(addprefix ) instead of $(foreach )
x86/vdso: Simplify obj-y addition
x86/vdso: Consolidate targets and clean-files
x86/bugs: Rename CONFIG_RETHUNK => CONFIG_MITIGATION_RETHUNK
x86/bugs: Rename CONFIG_CPU_SRSO => CONFIG_MITIGATION_SRSO
x86/bugs: Rename CONFIG_CPU_IBRS_ENTRY => CONFIG_MITIGATION_IBRS_ENTRY
x86/bugs: Rename CONFIG_CPU_UNRET_ENTRY => CONFIG_MITIGATION_UNRET_ENTRY
x86/bugs: Rename CONFIG_SLS => CONFIG_MITIGATION_SLS
...
|
||
|
Linus Torvalds
|
fcc196579a |
Misc cleanups, including a large series from Thomas Gleixner to
cure Sparse warnings. Signed-off-by: Ingo Molnar <mingo@kernel.org> -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmXvAFQRHG1pbmdvQGtl cm5lbC5vcmcACgkQEnMQ0APhK1hkDRAAwASVCQ88kiGqNQtHibXlK54mAFGsc0xv T8OPds15DUzoLg/y8lw0X0DHly6MdGXVmygybejNIw2BN4lhLjQ7f4Ria7rv7LDy FcI1jfvysEMyYRFHGRefb/GBFzuEfKoROwf+QylGmKz0ZK674gNMngsI9pwOBdbe wElq3IkHoNuTUfH9QA4BvqGam1n122nvVTop3g0PMHWzx9ky8hd/BEUjXFZhfINL zZk3fwUbER2QYbhHt+BN2GRbdf2BrKvqTkXpKxyXTdnpiqAo0CzBGKerZ62H82qG n737Nib1lrsfM5yDHySnau02aamRXaGvCJUd6gpac1ZmNpZMWhEOT/0Tr/Nj5ztF lUAvKqMZn/CwwQky1/XxD0LHegnve0G+syqQt/7x7o1ELdiwTzOWMCx016UeodzB yyHf3Xx9J8nt3snlrlZBaGEfegg9ePLu5Vir7iXjg3vrloUW8A+GZM62NVxF4HVV QWF80BfWf8zbLQ/OS1382t1shaioIe5pEXzIjcnyVIZCiiP2/5kP2O6P4XVbwVlo Ca5eEt8U1rtsLUZaCzI2ZRTQf/8SLMQWyaV+ZmkVwcVdFoARC31EgdE5wYYoZOf6 7Vl+rXd+rZCuTWk0ZgznCZEm75aaqukaQCBa2V8hIVociLFVzhg/Tjedv7s0CspA hNfxdN1LDZc= =0eJ7 -----END PGP SIGNATURE----- Merge tag 'x86-cleanups-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cleanups from Ingo Molnar: "Misc cleanups, including a large series from Thomas Gleixner to cure sparse warnings" * tag 'x86-cleanups-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/nmi: Drop unused declaration of proc_nmi_enabled() x86/callthunks: Use EXPORT_PER_CPU_SYMBOL_GPL() for per CPU variables x86/cpu: Provide a declaration for itlb_multihit_kvm_mitigation x86/cpu: Use EXPORT_PER_CPU_SYMBOL_GPL() for x86_spec_ctrl_current x86/uaccess: Add missing __force to casts in __access_ok() and valid_user_address() x86/percpu: Cure per CPU madness on UP smp: Consolidate smp_prepare_boot_cpu() x86/msr: Add missing __percpu annotations x86/msr: Prepare for including <linux/percpu.h> into <asm/msr.h> perf/x86/amd/uncore: Fix __percpu annotation x86/nmi: Remove an unnecessary IS_ENABLED(CONFIG_SMP) x86/apm_32: Remove dead function apm_get_battery_status() x86/insn-eval: Fix function param name in get_eff_addr_sib() |
||
|
Peter Xu
|
e72c7c2b88 |
mm/treewide: drop pXd_large()
They're not used anymore, drop all of them. Link: https://lkml.kernel.org/r/20240305043750.93762-10-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Muchun Song <muchun.song@linux.dev> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Peter Xu
|
0a845e0f63 |
mm/treewide: replace pud_large() with pud_leaf()
pud_large() is always defined as pud_leaf(). Merge their usages. Chose pud_leaf() because pud_leaf() is a global API, while pud_large() is not. Link: https://lkml.kernel.org/r/20240305043750.93762-9-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Muchun Song <muchun.song@linux.dev> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Peter Xu
|
2f709f7bfd |
mm/treewide: replace pmd_large() with pmd_leaf()
pmd_large() is always defined as pmd_leaf(). Merge their usages. Chose pmd_leaf() because pmd_leaf() is a global API, while pmd_large() is not. Link: https://lkml.kernel.org/r/20240305043750.93762-8-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Muchun Song <muchun.song@linux.dev> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Thomas Gleixner
|
65efc4dc12 |
x86/cpu: Provide a declaration for itlb_multihit_kvm_mitigation
Sparse complains rightfully about the missing declaration which has been placed sloppily into the usage site: bugs.c:2223:6: sparse: warning: symbol 'itlb_multihit_kvm_mitigation' was not declared. Should it be static? Add it to <asm/spec-ctrl.h> where it belongs and remove the one in the KVM code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20240304005104.787173239@linutronix.de |
||
|
Sean Christopherson
|
d02c357e5b |
KVM: x86/mmu: Retry fault before acquiring mmu_lock if mapping is changing
Retry page faults without acquiring mmu_lock, and without even faulting the page into the primary MMU, if the resolved gfn is covered by an active invalidation. Contending for mmu_lock is especially problematic on preemptible kernels as the mmu_notifier invalidation task will yield mmu_lock (see rwlock_needbreak()), delay the in-progress invalidation, and ultimately increase the latency of resolving the page fault. And in the worst case scenario, yielding will be accompanied by a remote TLB flush, e.g. if the invalidation covers a large range of memory and vCPUs are accessing addresses that were already zapped. Faulting the page into the primary MMU is similarly problematic, as doing so may acquire locks that need to be taken for the invalidation to complete (the primary MMU has finer grained locks than KVM's MMU), and/or may cause unnecessary churn (getting/putting pages, marking them accessed, etc). Alternatively, the yielding issue could be mitigated by teaching KVM's MMU iterators to perform more work before yielding, but that wouldn't solve the lock contention and would negatively affect scenarios where a vCPU is trying to fault in an address that is NOT covered by the in-progress invalidation. Add a dedicated lockess version of the range-based retry check to avoid false positives on the sanity check on start+end WARN, and so that it's super obvious that checking for a racing invalidation without holding mmu_lock is unsafe (though obviously useful). Wrap mmu_invalidate_in_progress in READ_ONCE() to ensure that pre-checking invalidation in a loop won't put KVM into an infinite loop, e.g. due to caching the in-progress flag and never seeing it go to '0'. Force a load of mmu_invalidate_seq as well, even though it isn't strictly necessary to avoid an infinite loop, as doing so improves the probability that KVM will detect an invalidation that already completed before acquiring mmu_lock and bailing anyways. Do the pre-check even for non-preemptible kernels, as waiting to detect the invalidation until mmu_lock is held guarantees the vCPU will observe the worst case latency in terms of handling the fault, and can generate even more mmu_lock contention. E.g. the vCPU will acquire mmu_lock, detect retry, drop mmu_lock, re-enter the guest, retake the fault, and eventually re-acquire mmu_lock. This behavior is also why there are no new starvation issues due to losing the fairness guarantees provided by rwlocks: if the vCPU needs to retry, it _must_ drop mmu_lock, i.e. waiting on mmu_lock doesn't guarantee forward progress in the face of _another_ mmu_notifier invalidation event. Note, adding READ_ONCE() isn't entirely free, e.g. on x86, the READ_ONCE() may generate a load into a register instead of doing a direct comparison (MOV+TEST+Jcc instead of CMP+Jcc), but practically speaking the added cost is a few bytes of code and maaaaybe a cycle or three. Reported-by: Yan Zhao <yan.y.zhao@intel.com> Closes: https://lore.kernel.org/all/ZNnPF4W26ZbAyGto@yzhao56-desk.sh.intel.com Reported-by: Friedrich Weber <f.weber@proxmox.com> Cc: Kai Huang <kai.huang@intel.com> Cc: Yan Zhao <yan.y.zhao@intel.com> Cc: Yuan Yao <yuan.yao@linux.intel.com> Cc: Xu Yilun <yilun.xu@linux.intel.com> Acked-by: Kai Huang <kai.huang@intel.com> Reviewed-by: Yan Zhao <yan.y.zhao@intel.com> Link: https://lore.kernel.org/r/20240222012640.2820927-1-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
||
|
Sean Christopherson
|
576a15de8d |
KVM: x86/mmu: Free TDP MMU roots while holding mmy_lock for read
Free TDP MMU roots from vCPU context while holding mmu_lock for read, it is completely legal to invoke kvm_tdp_mmu_put_root() as a reader. This eliminates the last mmu_lock writer in the TDP MMU's "fast zap" path after requesting vCPUs to reload roots, i.e. allows KVM to zap invalidated roots, free obsolete roots, and allocate new roots in parallel. On large VMs, e.g. 100+ vCPUs, allowing the bulk of the "fast zap" operation to run in parallel with freeing and allocating roots reduces the worst case latency for a vCPU to reload a root from 2-3ms to <100us. Link: https://lore.kernel.org/r/20240111020048.844847-9-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
||
|
Sean Christopherson
|
f5238c2a60 |
KVM: x86/mmu: Check for usable TDP MMU root while holding mmu_lock for read
When allocating a new TDP MMU root, check for a usable root while holding mmu_lock for read and only acquire mmu_lock for write if a new root needs to be created. There is no need to serialize other MMU operations if a vCPU is simply grabbing a reference to an existing root, holding mmu_lock for write is "necessary" (spoiler alert, it's not strictly necessary) only to ensure KVM doesn't end up with duplicate roots. Allowing vCPUs to get "new" roots in parallel is beneficial to VM boot and to setups that frequently delete memslots, i.e. which force all vCPUs to reload all roots. Link: https://lore.kernel.org/r/20240111020048.844847-7-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
||
|
Ingo Molnar
|
4589f199eb |
Merge branch 'x86/bugs' into x86/core, to pick up pending changes before dependent patches
Merge in pending alternatives patching infrastructure changes, before applying more patches. Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Tanzir Hasan
|
66a5c40f60 |
kernel.h: removed REPEAT_BYTE from kernel.h
This patch creates wordpart.h and includes it in asm/word-at-a-time.h for all architectures. WORD_AT_A_TIME_CONSTANTS depends on kernel.h because of REPEAT_BYTE. Moving this to another header and including it where necessary allows us to not include the bloated kernel.h. Making this implicit dependency on REPEAT_BYTE explicit allows for later improvements in the lib/string.c inclusion list. Suggested-by: Al Viro <viro@zeniv.linux.org.uk> Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Tanzir Hasan <tanzirh@google.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20231226-libstringheader-v6-1-80aa08c7652c@google.com Signed-off-by: Kees Cook <keescook@chromium.org> |
||
|
Kunwu Chan
|
0dbd054699 |
KVM: x86/mmu: Use KMEM_CACHE instead of kmem_cache_create()
Use the new KMEM_CACHE() macro instead of direct kmem_cache_create to simplify the creation of SLAB caches. Note, KMEM_CACHE() uses the required alignment of the struct, '8' as the alignment, whereas KVM's existing code passes '0'. In the end, the two values yield the same result as x86's minimum slab alignment is also '8' (which is not at all coincidental). Signed-off-by: Kunwu Chan <chentao@kylinos.cn> Link: https://lore.kernel.org/r/20240116100025.95702-1-chentao@kylinos.cn [sean: call out alignment behavior] Signed-off-by: Sean Christopherson <seanjc@google.com> |
||
|
Linus Torvalds
|
09d1c6a80f |
Generic:
- Use memdup_array_user() to harden against overflow.
- Unconditionally advertise KVM_CAP_DEVICE_CTRL for all architectures.
- Clean up Kconfigs that all KVM architectures were selecting
- New functionality around "guest_memfd", a new userspace API that
creates an anonymous file and returns a file descriptor that refers
to it. guest_memfd files are bound to their owning virtual machine,
cannot be mapped, read, or written by userspace, and cannot be resized.
guest_memfd files do however support PUNCH_HOLE, which can be used to
switch a memory area between guest_memfd and regular anonymous memory.
- New ioctl KVM_SET_MEMORY_ATTRIBUTES allowing userspace to specify
per-page attributes for a given page of guest memory; right now the
only attribute is whether the guest expects to access memory via
guest_memfd or not, which in Confidential SVMs backed by SEV-SNP,
TDX or ARM64 pKVM is checked by firmware or hypervisor that guarantees
confidentiality (AMD PSP, Intel TDX module, or EL2 in the case of pKVM).
x86:
- Support for "software-protected VMs" that can use the new guest_memfd
and page attributes infrastructure. This is mostly useful for testing,
since there is no pKVM-like infrastructure to provide a meaningfully
reduced TCB.
- Fix a relatively benign off-by-one error when splitting huge pages during
CLEAR_DIRTY_LOG.
- Fix a bug where KVM could incorrectly test-and-clear dirty bits in non-leaf
TDP MMU SPTEs if a racing thread replaces a huge SPTE with a non-huge SPTE.
- Use more generic lockdep assertions in paths that don't actually care
about whether the caller is a reader or a writer.
- let Xen guests opt out of having PV clock reported as "based on a stable TSC",
because some of them don't expect the "TSC stable" bit (added to the pvclock
ABI by KVM, but never set by Xen) to be set.
- Revert a bogus, made-up nested SVM consistency check for TLB_CONTROL.
- Advertise flush-by-ASID support for nSVM unconditionally, as KVM always
flushes on nested transitions, i.e. always satisfies flush requests. This
allows running bleeding edge versions of VMware Workstation on top of KVM.
- Sanity check that the CPU supports flush-by-ASID when enabling SEV support.
- On AMD machines with vNMI, always rely on hardware instead of intercepting
IRET in some cases to detect unmasking of NMIs
- Support for virtualizing Linear Address Masking (LAM)
- Fix a variety of vPMU bugs where KVM fail to stop/reset counters and other state
prior to refreshing the vPMU model.
- Fix a double-overflow PMU bug by tracking emulated counter events using a
dedicated field instead of snapshotting the "previous" counter. If the
hardware PMC count triggers overflow that is recognized in the same VM-Exit
that KVM manually bumps an event count, KVM would pend PMIs for both the
hardware-triggered overflow and for KVM-triggered overflow.
- Turn off KVM_WERROR by default for all configs so that it's not
inadvertantly enabled by non-KVM developers, which can be problematic for
subsystems that require no regressions for W=1 builds.
- Advertise all of the host-supported CPUID bits that enumerate IA32_SPEC_CTRL
"features".
- Don't force a masterclock update when a vCPU synchronizes to the current TSC
generation, as updating the masterclock can cause kvmclock's time to "jump"
unexpectedly, e.g. when userspace hotplugs a pre-created vCPU.
- Use RIP-relative address to read kvm_rebooting in the VM-Enter fault paths,
partly as a super minor optimization, but mostly to make KVM play nice with
position independent executable builds.
- Guard KVM-on-HyperV's range-based TLB flush hooks with an #ifdef on
CONFIG_HYPERV as a minor optimization, and to self-document the code.
- Add CONFIG_KVM_HYPERV to allow disabling KVM support for HyperV "emulation"
at build time.
ARM64:
- LPA2 support, adding 52bit IPA/PA capability for 4kB and 16kB
base granule sizes. Branch shared with the arm64 tree.
- Large Fine-Grained Trap rework, bringing some sanity to the
feature, although there is more to come. This comes with
a prefix branch shared with the arm64 tree.
- Some additional Nested Virtualization groundwork, mostly
introducing the NV2 VNCR support and retargetting the NV
support to that version of the architecture.
- A small set of vgic fixes and associated cleanups.
Loongarch:
- Optimization for memslot hugepage checking
- Cleanup and fix some HW/SW timer issues
- Add LSX/LASX (128bit/256bit SIMD) support
RISC-V:
- KVM_GET_REG_LIST improvement for vector registers
- Generate ISA extension reg_list using macros in get-reg-list selftest
- Support for reporting steal time along with selftest
s390:
- Bugfixes
Selftests:
- Fix an annoying goof where the NX hugepage test prints out garbage
instead of the magic token needed to run the test.
- Fix build errors when a header is delete/moved due to a missing flag
in the Makefile.
- Detect if KVM bugged/killed a selftest's VM and print out a helpful
message instead of complaining that a random ioctl() failed.
- Annotate the guest printf/assert helpers with __printf(), and fix the
various bugs that were lurking due to lack of said annotation.
There are two non-KVM patches buried in the middle of guest_memfd support:
fs: Rename anon_inode_getfile_secure() and anon_inode_getfd_secure()
mm: Add AS_UNMOVABLE to mark mapping as completely unmovable
The first is small and mostly suggested-by Christian Brauner; the second
a bit less so but it was written by an mm person (Vlastimil Babka).
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmWcMWkUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroO15gf/WLmmg3SET6Uzw9iEq2xo28831ZA+
6kpILfIDGKozV5safDmMvcInlc/PTnqOFrsKyyN4kDZ+rIJiafJdg/loE0kPXBML
wdR+2ix5kYI1FucCDaGTahskBDz8Lb/xTpwGg9BFLYFNmuUeHc74o6GoNvr1uliE
4kLZL2K6w0cSMPybUD+HqGaET80ZqPwecv+s1JL+Ia0kYZJONJifoHnvOUJ7DpEi
rgudVdgzt3EPjG0y1z6MjvDBXTCOLDjXajErlYuZD3Ej8N8s59Dh2TxOiDNTLdP4
a4zjRvDmgyr6H6sz+upvwc7f4M4p+DBvf+TkWF54mbeObHUYliStqURIoA==
=66Ws
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"Generic:
- Use memdup_array_user() to harden against overflow.
- Unconditionally advertise KVM_CAP_DEVICE_CTRL for all
architectures.
- Clean up Kconfigs that all KVM architectures were selecting
- New functionality around "guest_memfd", a new userspace API that
creates an anonymous file and returns a file descriptor that refers
to it. guest_memfd files are bound to their owning virtual machine,
cannot be mapped, read, or written by userspace, and cannot be
resized. guest_memfd files do however support PUNCH_HOLE, which can
be used to switch a memory area between guest_memfd and regular
anonymous memory.
- New ioctl KVM_SET_MEMORY_ATTRIBUTES allowing userspace to specify
per-page attributes for a given page of guest memory; right now the
only attribute is whether the guest expects to access memory via
guest_memfd or not, which in Confidential SVMs backed by SEV-SNP,
TDX or ARM64 pKVM is checked by firmware or hypervisor that
guarantees confidentiality (AMD PSP, Intel TDX module, or EL2 in
the case of pKVM).
x86:
- Support for "software-protected VMs" that can use the new
guest_memfd and page attributes infrastructure. This is mostly
useful for testing, since there is no pKVM-like infrastructure to
provide a meaningfully reduced TCB.
- Fix a relatively benign off-by-one error when splitting huge pages
during CLEAR_DIRTY_LOG.
- Fix a bug where KVM could incorrectly test-and-clear dirty bits in
non-leaf TDP MMU SPTEs if a racing thread replaces a huge SPTE with
a non-huge SPTE.
- Use more generic lockdep assertions in paths that don't actually
care about whether the caller is a reader or a writer.
- let Xen guests opt out of having PV clock reported as "based on a
stable TSC", because some of them don't expect the "TSC stable" bit
(added to the pvclock ABI by KVM, but never set by Xen) to be set.
- Revert a bogus, made-up nested SVM consistency check for
TLB_CONTROL.
- Advertise flush-by-ASID support for nSVM unconditionally, as KVM
always flushes on nested transitions, i.e. always satisfies flush
requests. This allows running bleeding edge versions of VMware
Workstation on top of KVM.
- Sanity check that the CPU supports flush-by-ASID when enabling SEV
support.
- On AMD machines with vNMI, always rely on hardware instead of
intercepting IRET in some cases to detect unmasking of NMIs
- Support for virtualizing Linear Address Masking (LAM)
- Fix a variety of vPMU bugs where KVM fail to stop/reset counters
and other state prior to refreshing the vPMU model.
- Fix a double-overflow PMU bug by tracking emulated counter events
using a dedicated field instead of snapshotting the "previous"
counter. If the hardware PMC count triggers overflow that is
recognized in the same VM-Exit that KVM manually bumps an event
count, KVM would pend PMIs for both the hardware-triggered overflow
and for KVM-triggered overflow.
- Turn off KVM_WERROR by default for all configs so that it's not
inadvertantly enabled by non-KVM developers, which can be
problematic for subsystems that require no regressions for W=1
builds.
- Advertise all of the host-supported CPUID bits that enumerate
IA32_SPEC_CTRL "features".
- Don't force a masterclock update when a vCPU synchronizes to the
current TSC generation, as updating the masterclock can cause
kvmclock's time to "jump" unexpectedly, e.g. when userspace
hotplugs a pre-created vCPU.
- Use RIP-relative address to read kvm_rebooting in the VM-Enter
fault paths, partly as a super minor optimization, but mostly to
make KVM play nice with position independent executable builds.
- Guard KVM-on-HyperV's range-based TLB flush hooks with an #ifdef on
CONFIG_HYPERV as a minor optimization, and to self-document the
code.
- Add CONFIG_KVM_HYPERV to allow disabling KVM support for HyperV
"emulation" at build time.
ARM64:
- LPA2 support, adding 52bit IPA/PA capability for 4kB and 16kB base
granule sizes. Branch shared with the arm64 tree.
- Large Fine-Grained Trap rework, bringing some sanity to the
feature, although there is more to come. This comes with a prefix
branch shared with the arm64 tree.
- Some additional Nested Virtualization groundwork, mostly
introducing the NV2 VNCR support and retargetting the NV support to
that version of the architecture.
- A small set of vgic fixes and associated cleanups.
Loongarch:
- Optimization for memslot hugepage checking
- Cleanup and fix some HW/SW timer issues
- Add LSX/LASX (128bit/256bit SIMD) support
RISC-V:
- KVM_GET_REG_LIST improvement for vector registers
- Generate ISA extension reg_list using macros in get-reg-list
selftest
- Support for reporting steal time along with selftest
s390:
- Bugfixes
Selftests:
- Fix an annoying goof where the NX hugepage test prints out garbage
instead of the magic token needed to run the test.
- Fix build errors when a header is delete/moved due to a missing
flag in the Makefile.
- Detect if KVM bugged/killed a selftest's VM and print out a helpful
message instead of complaining that a random ioctl() failed.
- Annotate the guest printf/assert helpers with __printf(), and fix
the various bugs that were lurking due to lack of said annotation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (185 commits)
x86/kvm: Do not try to disable kvmclock if it was not enabled
KVM: x86: add missing "depends on KVM"
KVM: fix direction of dependency on MMU notifiers
KVM: introduce CONFIG_KVM_COMMON
KVM: arm64: Add missing memory barriers when switching to pKVM's hyp pgd
KVM: arm64: vgic-its: Avoid potential UAF in LPI translation cache
RISC-V: KVM: selftests: Add get-reg-list test for STA registers
RISC-V: KVM: selftests: Add steal_time test support
RISC-V: KVM: selftests: Add guest_sbi_probe_extension
RISC-V: KVM: selftests: Move sbi_ecall to processor.c
RISC-V: KVM: Implement SBI STA extension
RISC-V: KVM: Add support for SBI STA registers
RISC-V: KVM: Add support for SBI extension registers
RISC-V: KVM: Add SBI STA info to vcpu_arch
RISC-V: KVM: Add steal-update vcpu request
RISC-V: KVM: Add SBI STA extension skeleton
RISC-V: paravirt: Implement steal-time support
RISC-V: Add SBI STA extension definitions
RISC-V: paravirt: Add skeleton for pv-time support
RISC-V: KVM: Fix indentation in kvm_riscv_vcpu_set_reg_csr()
...
|
||
|
Breno Leitao
|
aefb2f2e61 |
x86/bugs: Rename CONFIG_RETPOLINE => CONFIG_MITIGATION_RETPOLINE
Step 5/10 of the namespace unification of CPU mitigations related Kconfig options. [ mingo: Converted a few more uses in comments/messages as well. ] Suggested-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Ariel Miculas <amiculas@cisco.com> Acked-by: Josh Poimboeuf <jpoimboe@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/r/20231121160740.1249350-6-leitao@debian.org |
||
|
Paolo Bonzini
|
7f26fea9bc |
KVM x86 MMU changes for 6.8:
- Fix a relatively benign off-by-one error when splitting huge pages during
CLEAR_DIRTY_LOG.
- Fix a bug where KVM could incorrectly test-and-clear dirty bits in non-leaf
TDP MMU SPTEs if a racing thread replaces a huge SPTE with a non-huge SPTE.
- Relax the TDP MMU's lockdep assertions related to holding mmu_lock for read
versus write so that KVM doesn't pass "bool shared" all over the place just
to have precise assertions in paths that don't actually care about whether
the caller is a reader or a writer.
-----BEGIN PGP SIGNATURE-----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=3f2t
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-mmu-6.8' of https://github.com/kvm-x86/linux into HEAD
KVM x86 MMU changes for 6.8:
- Fix a relatively benign off-by-one error when splitting huge pages during
CLEAR_DIRTY_LOG.
- Fix a bug where KVM could incorrectly test-and-clear dirty bits in non-leaf
TDP MMU SPTEs if a racing thread replaces a huge SPTE with a non-huge SPTE.
- Relax the TDP MMU's lockdep assertions related to holding mmu_lock for read
versus write so that KVM doesn't pass "bool shared" all over the place just
to have precise assertions in paths that don't actually care about whether
the caller is a reader or a writer.
|
||
|
Paolo Bonzini
|
8ecb10bcbf |
KVM x86 support for virtualizing Linear Address Masking (LAM)
Add KVM support for Linear Address Masking (LAM). LAM tweaks the canonicality
checks for most virtual address usage in 64-bit mode, such that only the most
significant bit of the untranslated address bits must match the polarity of the
last translated address bit. This allows software to use ignored, untranslated
address bits for metadata, e.g. to efficiently tag pointers for address
sanitization.
LAM can be enabled separately for user pointers and supervisor pointers, and
for userspace LAM can be select between 48-bit and 57-bit masking
- 48-bit LAM: metadata bits 62:48, i.e. LAM width of 15.
- 57-bit LAM: metadata bits 62:57, i.e. LAM width of 6.
For user pointers, LAM enabling utilizes two previously-reserved high bits from
CR3 (similar to how PCID_NOFLUSH uses bit 63): LAM_U48 and LAM_U57, bits 62 and
61 respectively. Note, if LAM_57 is set, LAM_U48 is ignored, i.e.:
- CR3.LAM_U48=0 && CR3.LAM_U57=0 == LAM disabled for user pointers
- CR3.LAM_U48=1 && CR3.LAM_U57=0 == LAM-48 enabled for user pointers
- CR3.LAM_U48=x && CR3.LAM_U57=1 == LAM-57 enabled for user pointers
For supervisor pointers, LAM is controlled by a single bit, CR4.LAM_SUP, with
the 48-bit versus 57-bit LAM behavior following the current paging mode, i.e.:
- CR4.LAM_SUP=0 && CR4.LA57=x == LAM disabled for supervisor pointers
- CR4.LAM_SUP=1 && CR4.LA57=0 == LAM-48 enabled for supervisor pointers
- CR4.LAM_SUP=1 && CR4.LA57=1 == LAM-57 enabled for supervisor pointers
The modified LAM canonicality checks:
- LAM_S48 : [ 1 ][ metadata ][ 1 ]
63 47
- LAM_U48 : [ 0 ][ metadata ][ 0 ]
63 47
- LAM_S57 : [ 1 ][ metadata ][ 1 ]
63 56
- LAM_U57 + 5-lvl paging : [ 0 ][ metadata ][ 0 ]
63 56
- LAM_U57 + 4-lvl paging : [ 0 ][ metadata ][ 0...0 ]
63 56..47
The bulk of KVM support for LAM is to emulate LAM's modified canonicality
checks. The approach taken by KVM is to "fill" the metadata bits using the
highest bit of the translated address, e.g. for LAM-48, bit 47 is sign-extended
to bits 62:48. The most significant bit, 63, is *not* modified, i.e. its value
from the raw, untagged virtual address is kept for the canonicality check. This
untagging allows
Aside from emulating LAM's canonical checks behavior, LAM has the usual KVM
touchpoints for selectable features: enumeration (CPUID.7.1:EAX.LAM[bit 26],
enabling via CR3 and CR4 bits, etc.
-----BEGIN PGP SIGNATURE-----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=qUZ2
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-lam-6.8' of https://github.com/kvm-x86/linux into HEAD
KVM x86 support for virtualizing Linear Address Masking (LAM)
Add KVM support for Linear Address Masking (LAM). LAM tweaks the canonicality
checks for most virtual address usage in 64-bit mode, such that only the most
significant bit of the untranslated address bits must match the polarity of the
last translated address bit. This allows software to use ignored, untranslated
address bits for metadata, e.g. to efficiently tag pointers for address
sanitization.
LAM can be enabled separately for user pointers and supervisor pointers, and
for userspace LAM can be select between 48-bit and 57-bit masking
- 48-bit LAM: metadata bits 62:48, i.e. LAM width of 15.
- 57-bit LAM: metadata bits 62:57, i.e. LAM width of 6.
For user pointers, LAM enabling utilizes two previously-reserved high bits from
CR3 (similar to how PCID_NOFLUSH uses bit 63): LAM_U48 and LAM_U57, bits 62 and
61 respectively. Note, if LAM_57 is set, LAM_U48 is ignored, i.e.:
- CR3.LAM_U48=0 && CR3.LAM_U57=0 == LAM disabled for user pointers
- CR3.LAM_U48=1 && CR3.LAM_U57=0 == LAM-48 enabled for user pointers
- CR3.LAM_U48=x && CR3.LAM_U57=1 == LAM-57 enabled for user pointers
For supervisor pointers, LAM is controlled by a single bit, CR4.LAM_SUP, with
the 48-bit versus 57-bit LAM behavior following the current paging mode, i.e.:
- CR4.LAM_SUP=0 && CR4.LA57=x == LAM disabled for supervisor pointers
- CR4.LAM_SUP=1 && CR4.LA57=0 == LAM-48 enabled for supervisor pointers
- CR4.LAM_SUP=1 && CR4.LA57=1 == LAM-57 enabled for supervisor pointers
The modified LAM canonicality checks:
- LAM_S48 : [ 1 ][ metadata ][ 1 ]
63 47
- LAM_U48 : [ 0 ][ metadata ][ 0 ]
63 47
- LAM_S57 : [ 1 ][ metadata ][ 1 ]
63 56
- LAM_U57 + 5-lvl paging : [ 0 ][ metadata ][ 0 ]
63 56
- LAM_U57 + 4-lvl paging : [ 0 ][ metadata ][ 0...0 ]
63 56..47
The bulk of KVM support for LAM is to emulate LAM's modified canonicality
checks. The approach taken by KVM is to "fill" the metadata bits using the
highest bit of the translated address, e.g. for LAM-48, bit 47 is sign-extended
to bits 62:48. The most significant bit, 63, is *not* modified, i.e. its value
from the raw, untagged virtual address is kept for the canonicality check. This
untagging allows
Aside from emulating LAM's canonical checks behavior, LAM has the usual KVM
touchpoints for selectable features: enumeration (CPUID.7.1:EAX.LAM[bit 26],
enabling via CR3 and CR4 bits, etc.
|
||
|
Bjorn Helgaas
|
54aa699e80 |
arch/x86: Fix typos
Fix typos, most reported by "codespell arch/x86". Only touches comments, no code changes. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20240103004011.1758650-1-helgaas@kernel.org |
||
|
Paolo Bonzini
|
e59f75de4e |
KVM: x86/mmu: fix comment about mmu_unsync_pages_lock
Fix the comment about what can and cannot happen when mmu_unsync_pages_lock is not help. The comment correctly mentions "clearing sp->unsync", but then it talks about unsync going from 0 to 1. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Link: https://lore.kernel.org/r/20231125083400.1399197-5-pbonzini@redhat.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
||
|
Paolo Bonzini
|
5f3c8c9187 |
KVM: x86/mmu: remove unnecessary "bool shared" argument from functions
Neither tdp_mmu_next_root nor kvm_tdp_mmu_put_root need to know if the lock is taken for read or write. Either way, protection is achieved via RCU and tdp_mmu_pages_lock. Remove the argument and just assert that the lock is taken. Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Link: https://lore.kernel.org/r/20231125083400.1399197-2-pbonzini@redhat.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
||
|
David Matlack
|
1aa4bb9168 |
KVM: x86/mmu: Fix off-by-1 when splitting huge pages during CLEAR
Fix an off-by-1 error when passing in the range of pages to
kvm_mmu_try_split_huge_pages() during CLEAR_DIRTY_LOG. Specifically, end
is the last page that needs to be split (inclusive) so pass in `end + 1`
since kvm_mmu_try_split_huge_pages() expects the `end` to be
non-inclusive.
At worst this will cause a huge page to be write-protected instead of
eagerly split, which is purely a performance issue, not a correctness
issue. But even that is unlikely as it would require userspace pass in a
bitmap where the last page is the only 4K page on a huge page that needs
to be split.
Reported-by: Vipin Sharma <vipinsh@google.com>
Fixes:
|
||
|
Sean Christopherson
|
0277022a77 |
KVM: x86/mmu: Declare flush_remote_tlbs{_range}() hooks iff HYPERV!=n
Declare the kvm_x86_ops hooks used to wire up paravirt TLB flushes when running under Hyper-V if and only if CONFIG_HYPERV!=n. Wrapping yet more code with IS_ENABLED(CONFIG_HYPERV) eliminates a handful of conditional branches, and makes it super obvious why the hooks *might* be valid. Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Link: https://lore.kernel.org/r/20231018192325.1893896-1-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
||
|
Binbin Wu
|
a130066f74 |
KVM: x86/mmu: Drop non-PA bits when getting GFN for guest's PGD
Drop non-PA bits when getting GFN for guest's PGD with the maximum theoretical mask for guest MAXPHYADDR. Do it unconditionally because it's harmless for 32-bit guests, querying 64-bit mode would be more expensive, and for EPT the mask isn't tied to guest mode. Using PT_BASE_ADDR_MASK would be technically wrong (PAE paging has 64-bit elements _except_ for CR3, which has only 32 valid bits), it wouldn't matter in practice though. Opportunistically use GENMASK_ULL() to define __PT_BASE_ADDR_MASK. Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com> Tested-by: Xuelian Guo <xuelian.guo@intel.com> Link: https://lore.kernel.org/r/20230913124227.12574-6-binbin.wu@linux.intel.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
||
|
Paolo Bonzini
|
6c370dc653 |
Merge branch 'kvm-guestmemfd' into HEAD
Introduce several new KVM uAPIs to ultimately create a guest-first memory
subsystem within KVM, a.k.a. guest_memfd. Guest-first memory allows KVM
to provide features, enhancements, and optimizations that are kludgly
or outright impossible to implement in a generic memory subsystem.
The core KVM ioctl() for guest_memfd is KVM_CREATE_GUEST_MEMFD, which
similar to the generic memfd_create(), creates an anonymous file and
returns a file descriptor that refers to it. Again like "regular"
memfd files, guest_memfd files live in RAM, have volatile storage,
and are automatically released when the last reference is dropped.
The key differences between memfd files (and every other memory subystem)
is that guest_memfd files are bound to their owning virtual machine,
cannot be mapped, read, or written by userspace, and cannot be resized.
guest_memfd files do however support PUNCH_HOLE, which can be used to
convert a guest memory area between the shared and guest-private states.
A second KVM ioctl(), KVM_SET_MEMORY_ATTRIBUTES, allows userspace to
specify attributes for a given page of guest memory. In the long term,
it will likely be extended to allow userspace to specify per-gfn RWX
protections, including allowing memory to be writable in the guest
without it also being writable in host userspace.
The immediate and driving use case for guest_memfd are Confidential
(CoCo) VMs, specifically AMD's SEV-SNP, Intel's TDX, and KVM's own pKVM.
For such use cases, being able to map memory into KVM guests without
requiring said memory to be mapped into the host is a hard requirement.
While SEV+ and TDX prevent untrusted software from reading guest private
data by encrypting guest memory, pKVM provides confidentiality and
integrity *without* relying on memory encryption. In addition, with
SEV-SNP and especially TDX, accessing guest private memory can be fatal
to the host, i.e. KVM must be prevent host userspace from accessing
guest memory irrespective of hardware behavior.
Long term, guest_memfd may be useful for use cases beyond CoCo VMs,
for example hardening userspace against unintentional accesses to guest
memory. As mentioned earlier, KVM's ABI uses userspace VMA protections to
define the allow guest protection (with an exception granted to mapping
guest memory executable), and similarly KVM currently requires the guest
mapping size to be a strict subset of the host userspace mapping size.
Decoupling the mappings sizes would allow userspace to precisely map
only what is needed and with the required permissions, without impacting
guest performance.
A guest-first memory subsystem also provides clearer line of sight to
things like a dedicated memory pool (for slice-of-hardware VMs) and
elimination of "struct page" (for offload setups where userspace _never_
needs to DMA from or into guest memory).
guest_memfd is the result of 3+ years of development and exploration;
taking on memory management responsibilities in KVM was not the first,
second, or even third choice for supporting CoCo VMs. But after many
failed attempts to avoid KVM-specific backing memory, and looking at
where things ended up, it is quite clear that of all approaches tried,
guest_memfd is the simplest, most robust, and most extensible, and the
right thing to do for KVM and the kernel at-large.
The "development cycle" for this version is going to be very short;
ideally, next week I will merge it as is in kvm/next, taking this through
the KVM tree for 6.8 immediately after the end of the merge window.
The series is still based on 6.6 (plus KVM changes for 6.7) so it
will require a small fixup for changes to get_file_rcu() introduced in
6.7 by commit
|
||
|
Sean Christopherson
|
eed52e434b |
KVM: Allow arch code to track number of memslot address spaces per VM
Let x86 track the number of address spaces on a per-VM basis so that KVM can disallow SMM memslots for confidential VMs. Confidentials VMs are fundamentally incompatible with emulating SMM, which as the name suggests requires being able to read and write guest memory and register state. Disallowing SMM will simplify support for guest private memory, as KVM will not need to worry about tracking memory attributes for multiple address spaces (SMM is the only "non-default" address space across all architectures). Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Fuad Tabba <tabba@google.com> Tested-by: Fuad Tabba <tabba@google.com> Message-Id: <20231027182217.3615211-23-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Chao Peng
|
8dd2eee9d5 |
KVM: x86/mmu: Handle page fault for private memory
Add support for resolving page faults on guest private memory for VMs that differentiate between "shared" and "private" memory. For such VMs, KVM_MEM_GUEST_MEMFD memslots can include both fd-based private memory and hva-based shared memory, and KVM needs to map in the "correct" variant, i.e. KVM needs to map the gfn shared/private as appropriate based on the current state of the gfn's KVM_MEMORY_ATTRIBUTE_PRIVATE flag. For AMD's SEV-SNP and Intel's TDX, the guest effectively gets to request shared vs. private via a bit in the guest page tables, i.e. what the guest wants may conflict with the current memory attributes. To support such "implicit" conversion requests, exit to user with KVM_EXIT_MEMORY_FAULT to forward the request to userspace. Add a new flag for memory faults, KVM_MEMORY_EXIT_FLAG_PRIVATE, to communicate whether the guest wants to map memory as shared vs. private. Like KVM_MEMORY_ATTRIBUTE_PRIVATE, use bit 3 for flagging private memory so that KVM can use bits 0-2 for capturing RWX behavior if/when userspace needs such information, e.g. a likely user of KVM_EXIT_MEMORY_FAULT is to exit on missing mappings when handling guest page fault VM-Exits. In that case, userspace will want to know RWX information in order to correctly/precisely resolve the fault. Note, private memory *must* be backed by guest_memfd, i.e. shared mappings always come from the host userspace page tables, and private mappings always come from a guest_memfd instance. Co-developed-by: Yu Zhang <yu.c.zhang@linux.intel.com> Signed-off-by: Yu Zhang <yu.c.zhang@linux.intel.com> Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com> Co-developed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Fuad Tabba <tabba@google.com> Tested-by: Fuad Tabba <tabba@google.com> Message-Id: <20231027182217.3615211-21-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Chao Peng
|
90b4fe1798 |
KVM: x86: Disallow hugepages when memory attributes are mixed
Disallow creating hugepages with mixed memory attributes, e.g. shared versus private, as mapping a hugepage in this case would allow the guest to access memory with the wrong attributes, e.g. overlaying private memory with a shared hugepage. Tracking whether or not attributes are mixed via the existing disallow_lpage field, but use the most significant bit in 'disallow_lpage' to indicate a hugepage has mixed attributes instead using the normal refcounting. Whether or not attributes are mixed is binary; either they are or they aren't. Attempting to squeeze that info into the refcount is unnecessarily complex as it would require knowing the previous state of the mixed count when updating attributes. Using a flag means KVM just needs to ensure the current status is reflected in the memslots. Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com> Co-developed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20231027182217.3615211-20-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Chao Peng
|
8569992d64 |
KVM: Use gfn instead of hva for mmu_notifier_retry
Currently in mmu_notifier invalidate path, hva range is recorded and then checked against by mmu_invalidate_retry_hva() in the page fault handling path. However, for the soon-to-be-introduced private memory, a page fault may not have a hva associated, checking gfn(gpa) makes more sense. For existing hva based shared memory, gfn is expected to also work. The only downside is when aliasing multiple gfns to a single hva, the current algorithm of checking multiple ranges could result in a much larger range being rejected. Such aliasing should be uncommon, so the impact is expected small. Suggested-by: Sean Christopherson <seanjc@google.com> Cc: Xu Yilun <yilun.xu@intel.com> Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com> Reviewed-by: Fuad Tabba <tabba@google.com> Tested-by: Fuad Tabba <tabba@google.com> [sean: convert vmx_set_apic_access_page_addr() to gfn-based API] Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Xu Yilun <yilun.xu@linux.intel.com> Message-Id: <20231027182217.3615211-4-seanjc@google.com> Reviewed-by: Kai Huang <kai.huang@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Linus Torvalds
|
ecae0bd517 |
Many singleton patches against the MM code. The patch series which are
included in this merge do the following:
- Kemeng Shi has contributed some compation maintenance work in the
series "Fixes and cleanups to compaction".
- Joel Fernandes has a patchset ("Optimize mremap during mutual
alignment within PMD") which fixes an obscure issue with mremap()'s
pagetable handling during a subsequent exec(), based upon an
implementation which Linus suggested.
- More DAMON/DAMOS maintenance and feature work from SeongJae Park i the
following patch series:
mm/damon: misc fixups for documents, comments and its tracepoint
mm/damon: add a tracepoint for damos apply target regions
mm/damon: provide pseudo-moving sum based access rate
mm/damon: implement DAMOS apply intervals
mm/damon/core-test: Fix memory leaks in core-test
mm/damon/sysfs-schemes: Do DAMOS tried regions update for only one apply interval
- In the series "Do not try to access unaccepted memory" Adrian Hunter
provides some fixups for the recently-added "unaccepted memory' feature.
To increase the feature's checking coverage. "Plug a few gaps where
RAM is exposed without checking if it is unaccepted memory".
- In the series "cleanups for lockless slab shrink" Qi Zheng has done
some maintenance work which is preparation for the lockless slab
shrinking code.
- Qi Zheng has redone the earlier (and reverted) attempt to make slab
shrinking lockless in the series "use refcount+RCU method to implement
lockless slab shrink".
- David Hildenbrand contributes some maintenance work for the rmap code
in the series "Anon rmap cleanups".
- Kefeng Wang does more folio conversions and some maintenance work in
the migration code. Series "mm: migrate: more folio conversion and
unification".
- Matthew Wilcox has fixed an issue in the buffer_head code which was
causing long stalls under some heavy memory/IO loads. Some cleanups
were added on the way. Series "Add and use bdev_getblk()".
- In the series "Use nth_page() in place of direct struct page
manipulation" Zi Yan has fixed a potential issue with the direct
manipulation of hugetlb page frames.
- In the series "mm: hugetlb: Skip initialization of gigantic tail
struct pages if freed by HVO" has improved our handling of gigantic
pages in the hugetlb vmmemmep optimizaton code. This provides
significant boot time improvements when significant amounts of gigantic
pages are in use.
- Matthew Wilcox has sent the series "Small hugetlb cleanups" - code
rationalization and folio conversions in the hugetlb code.
- Yin Fengwei has improved mlock()'s handling of large folios in the
series "support large folio for mlock"
- In the series "Expose swapcache stat for memcg v1" Liu Shixin has
added statistics for memcg v1 users which are available (and useful)
under memcg v2.
- Florent Revest has enhanced the MDWE (Memory-Deny-Write-Executable)
prctl so that userspace may direct the kernel to not automatically
propagate the denial to child processes. The series is named "MDWE
without inheritance".
- Kefeng Wang has provided the series "mm: convert numa balancing
functions to use a folio" which does what it says.
- In the series "mm/ksm: add fork-exec support for prctl" Stefan Roesch
makes is possible for a process to propagate KSM treatment across
exec().
- Huang Ying has enhanced memory tiering's calculation of memory
distances. This is used to permit the dax/kmem driver to use "high
bandwidth memory" in addition to Optane Data Center Persistent Memory
Modules (DCPMM). The series is named "memory tiering: calculate
abstract distance based on ACPI HMAT"
- In the series "Smart scanning mode for KSM" Stefan Roesch has
optimized KSM by teaching it to retain and use some historical
information from previous scans.
- Yosry Ahmed has fixed some inconsistencies in memcg statistics in the
series "mm: memcg: fix tracking of pending stats updates values".
- In the series "Implement IOCTL to get and optionally clear info about
PTEs" Peter Xu has added an ioctl to /proc/<pid>/pagemap which permits
us to atomically read-then-clear page softdirty state. This is mainly
used by CRIU.
- Hugh Dickins contributed the series "shmem,tmpfs: general maintenance"
- a bunch of relatively minor maintenance tweaks to this code.
- Matthew Wilcox has increased the use of the VMA lock over file-backed
page faults in the series "Handle more faults under the VMA lock". Some
rationalizations of the fault path became possible as a result.
- In the series "mm/rmap: convert page_move_anon_rmap() to
folio_move_anon_rmap()" David Hildenbrand has implemented some cleanups
and folio conversions.
- In the series "various improvements to the GUP interface" Lorenzo
Stoakes has simplified and improved the GUP interface with an eye to
providing groundwork for future improvements.
- Andrey Konovalov has sent along the series "kasan: assorted fixes and
improvements" which does those things.
- Some page allocator maintenance work from Kemeng Shi in the series
"Two minor cleanups to break_down_buddy_pages".
- In thes series "New selftest for mm" Breno Leitao has developed
another MM self test which tickles a race we had between madvise() and
page faults.
- In the series "Add folio_end_read" Matthew Wilcox provides cleanups
and an optimization to the core pagecache code.
- Nhat Pham has added memcg accounting for hugetlb memory in the series
"hugetlb memcg accounting".
- Cleanups and rationalizations to the pagemap code from Lorenzo
Stoakes, in the series "Abstract vma_merge() and split_vma()".
- Audra Mitchell has fixed issues in the procfs page_owner code's new
timestamping feature which was causing some misbehaviours. In the
series "Fix page_owner's use of free timestamps".
- Lorenzo Stoakes has fixed the handling of new mappings of sealed files
in the series "permit write-sealed memfd read-only shared mappings".
- Mike Kravetz has optimized the hugetlb vmemmap optimization in the
series "Batch hugetlb vmemmap modification operations".
- Some buffer_head folio conversions and cleanups from Matthew Wilcox in
the series "Finish the create_empty_buffers() transition".
- As a page allocator performance optimization Huang Ying has added
automatic tuning to the allocator's per-cpu-pages feature, in the series
"mm: PCP high auto-tuning".
- Roman Gushchin has contributed the patchset "mm: improve performance
of accounted kernel memory allocations" which improves their performance
by ~30% as measured by a micro-benchmark.
- folio conversions from Kefeng Wang in the series "mm: convert page
cpupid functions to folios".
- Some kmemleak fixups in Liu Shixin's series "Some bugfix about
kmemleak".
- Qi Zheng has improved our handling of memoryless nodes by keeping them
off the allocation fallback list. This is done in the series "handle
memoryless nodes more appropriately".
- khugepaged conversions from Vishal Moola in the series "Some
khugepaged folio conversions".
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZULEMwAKCRDdBJ7gKXxA
jhQHAQCYpD3g849x69DmHnHWHm/EHQLvQmRMDeYZI+nx/sCJOwEAw4AKg0Oemv9y
FgeUPAD1oasg6CP+INZvCj34waNxwAc=
=E+Y4
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-11-01-14-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Many singleton patches against the MM code. The patch series which are
included in this merge do the following:
- Kemeng Shi has contributed some compation maintenance work in the
series 'Fixes and cleanups to compaction'
- Joel Fernandes has a patchset ('Optimize mremap during mutual
alignment within PMD') which fixes an obscure issue with mremap()'s
pagetable handling during a subsequent exec(), based upon an
implementation which Linus suggested
- More DAMON/DAMOS maintenance and feature work from SeongJae Park i
the following patch series:
mm/damon: misc fixups for documents, comments and its tracepoint
mm/damon: add a tracepoint for damos apply target regions
mm/damon: provide pseudo-moving sum based access rate
mm/damon: implement DAMOS apply intervals
mm/damon/core-test: Fix memory leaks in core-test
mm/damon/sysfs-schemes: Do DAMOS tried regions update for only one apply interval
- In the series 'Do not try to access unaccepted memory' Adrian
Hunter provides some fixups for the recently-added 'unaccepted
memory' feature. To increase the feature's checking coverage. 'Plug
a few gaps where RAM is exposed without checking if it is
unaccepted memory'
- In the series 'cleanups for lockless slab shrink' Qi Zheng has done
some maintenance work which is preparation for the lockless slab
shrinking code
- Qi Zheng has redone the earlier (and reverted) attempt to make slab
shrinking lockless in the series 'use refcount+RCU method to
implement lockless slab shrink'
- David Hildenbrand contributes some maintenance work for the rmap
code in the series 'Anon rmap cleanups'
- Kefeng Wang does more folio conversions and some maintenance work
in the migration code. Series 'mm: migrate: more folio conversion
and unification'
- Matthew Wilcox has fixed an issue in the buffer_head code which was
causing long stalls under some heavy memory/IO loads. Some cleanups
were added on the way. Series 'Add and use bdev_getblk()'
- In the series 'Use nth_page() in place of direct struct page
manipulation' Zi Yan has fixed a potential issue with the direct
manipulation of hugetlb page frames
- In the series 'mm: hugetlb: Skip initialization of gigantic tail
struct pages if freed by HVO' has improved our handling of gigantic
pages in the hugetlb vmmemmep optimizaton code. This provides
significant boot time improvements when significant amounts of
gigantic pages are in use
- Matthew Wilcox has sent the series 'Small hugetlb cleanups' - code
rationalization and folio conversions in the hugetlb code
- Yin Fengwei has improved mlock()'s handling of large folios in the
series 'support large folio for mlock'
- In the series 'Expose swapcache stat for memcg v1' Liu Shixin has
added statistics for memcg v1 users which are available (and
useful) under memcg v2
- Florent Revest has enhanced the MDWE (Memory-Deny-Write-Executable)
prctl so that userspace may direct the kernel to not automatically
propagate the denial to child processes. The series is named 'MDWE
without inheritance'
- Kefeng Wang has provided the series 'mm: convert numa balancing
functions to use a folio' which does what it says
- In the series 'mm/ksm: add fork-exec support for prctl' Stefan
Roesch makes is possible for a process to propagate KSM treatment
across exec()
- Huang Ying has enhanced memory tiering's calculation of memory
distances. This is used to permit the dax/kmem driver to use 'high
bandwidth memory' in addition to Optane Data Center Persistent
Memory Modules (DCPMM). The series is named 'memory tiering:
calculate abstract distance based on ACPI HMAT'
- In the series 'Smart scanning mode for KSM' Stefan Roesch has
optimized KSM by teaching it to retain and use some historical
information from previous scans
- Yosry Ahmed has fixed some inconsistencies in memcg statistics in
the series 'mm: memcg: fix tracking of pending stats updates
values'
- In the series 'Implement IOCTL to get and optionally clear info
about PTEs' Peter Xu has added an ioctl to /proc/<pid>/pagemap
which permits us to atomically read-then-clear page softdirty
state. This is mainly used by CRIU
- Hugh Dickins contributed the series 'shmem,tmpfs: general
maintenance', a bunch of relatively minor maintenance tweaks to
this code
- Matthew Wilcox has increased the use of the VMA lock over
file-backed page faults in the series 'Handle more faults under the
VMA lock'. Some rationalizations of the fault path became possible
as a result
- In the series 'mm/rmap: convert page_move_anon_rmap() to
folio_move_anon_rmap()' David Hildenbrand has implemented some
cleanups and folio conversions
- In the series 'various improvements to the GUP interface' Lorenzo
Stoakes has simplified and improved the GUP interface with an eye
to providing groundwork for future improvements
- Andrey Konovalov has sent along the series 'kasan: assorted fixes
and improvements' which does those things
- Some page allocator maintenance work from Kemeng Shi in the series
'Two minor cleanups to break_down_buddy_pages'
- In thes series 'New selftest for mm' Breno Leitao has developed
another MM self test which tickles a race we had between madvise()
and page faults
- In the series 'Add folio_end_read' Matthew Wilcox provides cleanups
and an optimization to the core pagecache code
- Nhat Pham has added memcg accounting for hugetlb memory in the
series 'hugetlb memcg accounting'
- Cleanups and rationalizations to the pagemap code from Lorenzo
Stoakes, in the series 'Abstract vma_merge() and split_vma()'
- Audra Mitchell has fixed issues in the procfs page_owner code's new
timestamping feature which was causing some misbehaviours. In the
series 'Fix page_owner's use of free timestamps'
- Lorenzo Stoakes has fixed the handling of new mappings of sealed
files in the series 'permit write-sealed memfd read-only shared
mappings'
- Mike Kravetz has optimized the hugetlb vmemmap optimization in the
series 'Batch hugetlb vmemmap modification operations'
- Some buffer_head folio conversions and cleanups from Matthew Wilcox
in the series 'Finish the create_empty_buffers() transition'
- As a page allocator performance optimization Huang Ying has added
automatic tuning to the allocator's per-cpu-pages feature, in the
series 'mm: PCP high auto-tuning'
- Roman Gushchin has contributed the patchset 'mm: improve
performance of accounted kernel memory allocations' which improves
their performance by ~30% as measured by a micro-benchmark
- folio conversions from Kefeng Wang in the series 'mm: convert page
cpupid functions to folios'
- Some kmemleak fixups in Liu Shixin's series 'Some bugfix about
kmemleak'
- Qi Zheng has improved our handling of memoryless nodes by keeping
them off the allocation fallback list. This is done in the series
'handle memoryless nodes more appropriately'
- khugepaged conversions from Vishal Moola in the series 'Some
khugepaged folio conversions'"
[ bcachefs conflicts with the dynamically allocated shrinkers have been
resolved as per Stephen Rothwell in
https://lore.kernel.org/all/20230913093553.4290421e@canb.auug.org.au/
with help from Qi Zheng.
The clone3 test filtering conflict was half-arsed by yours truly ]
* tag 'mm-stable-2023-11-01-14-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (406 commits)
mm/damon/sysfs: update monitoring target regions for online input commit
mm/damon/sysfs: remove requested targets when online-commit inputs
selftests: add a sanity check for zswap
Documentation: maple_tree: fix word spelling error
mm/vmalloc: fix the unchecked dereference warning in vread_iter()
zswap: export compression failure stats
Documentation: ubsan: drop "the" from article title
mempolicy: migration attempt to match interleave nodes
mempolicy: mmap_lock is not needed while migrating folios
mempolicy: alloc_pages_mpol() for NUMA policy without vma
mm: add page_rmappable_folio() wrapper
mempolicy: remove confusing MPOL_MF_LAZY dead code
mempolicy: mpol_shared_policy_init() without pseudo-vma
mempolicy trivia: use pgoff_t in shared mempolicy tree
mempolicy trivia: slightly more consistent naming
mempolicy trivia: delete those ancient pr_debug()s
mempolicy: fix migrate_pages(2) syscall return nr_failed
kernfs: drop shared NUMA mempolicy hooks
hugetlbfs: drop shared NUMA mempolicy pretence
mm/damon/sysfs-test: add a unit test for damon_sysfs_set_targets()
...
|
||
|
Li zeming
|
1de9992f9d |
KVM: x86/mmu: Remove unnecessary ‘NULL’ values from sptep
Don't initialize "spte" and "sptep" in fast_page_fault() as they are both guaranteed (for all intents and purposes) to be written at the start of every loop iteration. Add a sanity check that "sptep" is non-NULL after walking the shadow page tables, as encountering a NULL root would result in "spte" not being written, i.e. would lead to uninitialized data or the previous value being consumed. Signed-off-by: Li zeming <zeming@nfschina.com> Link: https://lore.kernel.org/r/20230905182006.2964-1-zeming@nfschina.com [sean: rewrite changelog with --verbose] Signed-off-by: Sean Christopherson <seanjc@google.com> |
||
|
Yan Zhao
|
1affe455d6 |
KVM: x86/mmu: Add helpers to return if KVM honors guest MTRRs
Add helpers to check if KVM honors guest MTRRs instead of open coding the logic in kvm_tdp_page_fault(). Future fixes and cleanups will also need to determine if KVM should honor guest MTRRs, e.g. for CR0.CD toggling and and non-coherent DMA transitions. Provide an inner helper, __kvm_mmu_honors_guest_mtrrs(), so that KVM can check if guest MTRRs were honored when stopping non-coherent DMA. Note, there is no need to explicitly check that TDP is enabled, KVM clears shadow_memtype_mask when TDP is disabled, i.e. it's non-zero if and only if EPT is enabled. Suggested-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Yan Zhao <yan.y.zhao@intel.com> Link: https://lore.kernel.org/r/20230714065006.20201-1-yan.y.zhao@intel.com Link: https://lore.kernel.org/r/20230714065043.20258-1-yan.y.zhao@intel.com [sean: squash into a one patch, drop explicit TDP check massage changelog] Signed-off-by: Sean Christopherson <seanjc@google.com> |
||
|
Qi Zheng
|
e5985c4098 |
kvm: mmu: dynamically allocate the x86-mmu shrinker
Use new APIs to dynamically allocate the x86-mmu shrinker. Link: https://lkml.kernel.org/r/20230911094444.68966-3-zhengqi.arch@bytedance.com Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Alasdair Kergon <agk@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Andreas Gruenbacher <agruenba@redhat.com> Cc: Anna Schumaker <anna@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Bob Peterson <rpeterso@redhat.com> Cc: Carlos Llamas <cmllamas@google.com> Cc: Chandan Babu R <chandan.babu@oracle.com> Cc: Chao Yu <chao@kernel.org> Cc: Chris Mason <clm@fb.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christian Koenig <christian.koenig@amd.com> Cc: Chuck Lever <cel@kernel.org> Cc: Coly Li <colyli@suse.de> Cc: Dai Ngo <Dai.Ngo@oracle.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: "Darrick J. Wong" <djwong@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Cc: David Airlie <airlied@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Sterba <dsterba@suse.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Gao Xiang <hsiangkao@linux.alibaba.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Huang Rui <ray.huang@amd.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Wang <jasowang@redhat.com> Cc: Jeff Layton <jlayton@kernel.org> Cc: Jeffle Xu <jefflexu@linux.alibaba.com> Cc: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: Kirill Tkhai <tkhai@ya.ru> Cc: Marijn Suijten <marijn.suijten@somainline.org> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Mike Snitzer <snitzer@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nadav Amit <namit@vmware.com> Cc: Neil Brown <neilb@suse.de> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Olga Kornievskaia <kolga@netapp.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rob Clark <robdclark@gmail.com> Cc: Rob Herring <robh@kernel.org> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Sean Paul <sean@poorly.run> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Song Liu <song@kernel.org> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Tom Talpey <tom@talpey.com> Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Cc: Yue Hu <huyue2@coolpad.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Sean Christopherson
|
0df9dab891 |
KVM: x86/mmu: Stop zapping invalidated TDP MMU roots asynchronously
Stop zapping invalidate TDP MMU roots via work queue now that KVM preserves TDP MMU roots until they are explicitly invalidated. Zapping roots asynchronously was effectively a workaround to avoid stalling a vCPU for an extended during if a vCPU unloaded a root, which at the time happened whenever the guest toggled CR0.WP (a frequent operation for some guest kernels). While a clever hack, zapping roots via an unbound worker had subtle, unintended consequences on host scheduling, especially when zapping multiple roots, e.g. as part of a memslot. Because the work of zapping a root is no longer bound to the task that initiated the zap, things like the CPU affinity and priority of the original task get lost. Losing the affinity and priority can be especially problematic if unbound workqueues aren't affined to a small number of CPUs, as zapping multiple roots can cause KVM to heavily utilize the majority of CPUs in the system, *beyond* the CPUs KVM is already using to run vCPUs. When deleting a memslot via KVM_SET_USER_MEMORY_REGION, the async root zap can result in KVM occupying all logical CPUs for ~8ms, and result in high priority tasks not being scheduled in in a timely manner. In v5.15, which doesn't preserve unloaded roots, the issues were even more noticeable as KVM would zap roots more frequently and could occupy all CPUs for 50ms+. Consuming all CPUs for an extended duration can lead to significant jitter throughout the system, e.g. on ChromeOS with virtio-gpu, deleting memslots is a semi-frequent operation as memslots are deleted and recreated with different host virtual addresses to react to host GPU drivers allocating and freeing GPU blobs. On ChromeOS, the jitter manifests as audio blips during games due to the audio server's tasks not getting scheduled in promptly, despite the tasks having a high realtime priority. Deleting memslots isn't exactly a fast path and should be avoided when possible, and ChromeOS is working towards utilizing MAP_FIXED to avoid the memslot shenanigans, but KVM is squarely in the wrong. Not to mention that removing the async zapping eliminates a non-trivial amount of complexity. Note, one of the subtle behaviors hidden behind the async zapping is that KVM would zap invalidated roots only once (ignoring partial zaps from things like mmu_notifier events). Preserve this behavior by adding a flag to identify roots that are scheduled to be zapped versus roots that have already been zapped but not yet freed. Add a comment calling out why kvm_tdp_mmu_invalidate_all_roots() can encounter invalid roots, as it's not at all obvious why zapping invalidated roots shouldn't simply zap all invalid roots. Reported-by: Pattara Teerapong <pteerapong@google.com> Cc: David Stevens <stevensd@google.com> Cc: Yiwei Zhang<zzyiwei@google.com> Cc: Paul Hsia <paulhsia@google.com> Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20230916003916.2545000-4-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Paolo Bonzini
|
441a5dfcd9 |
KVM: x86/mmu: Do not filter address spaces in for_each_tdp_mmu_root_yield_safe()
All callers except the MMU notifier want to process all address spaces. Remove the address space ID argument of for_each_tdp_mmu_root_yield_safe() and switch the MMU notifier to use __for_each_tdp_mmu_root_yield_safe(). Extracted out of a patch by Sean Christopherson <seanjc@google.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Sean Christopherson
|
50107e8b2a |
KVM: x86/mmu: Open code leaf invalidation from mmu_notifier
The mmu_notifier path is a bit of a special snowflake, e.g. it zaps only a single address space (because it's per-slot), and can't always yield. Because of this, it calls kvm_tdp_mmu_zap_leafs() in ways that no one else does. Iterate manually over the leafs in response to an mmu_notifier invalidation, instead of invoking kvm_tdp_mmu_zap_leafs(). Drop the @can_yield param from kvm_tdp_mmu_zap_leafs() as its sole remaining caller unconditionally passes "true". Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20230916003916.2545000-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Sean Christopherson
|
0e3223d8d0 |
KVM: x86/mmu: Use dummy root, backed by zero page, for !visible guest roots
When attempting to allocate a shadow root for a !visible guest root gfn, e.g. that resides in MMIO space, load a dummy root that is backed by the zero page instead of immediately synthesizing a triple fault shutdown (using the zero page ensures any attempt to translate memory will generate a !PRESENT fault and thus VM-Exit). Unless the vCPU is racing with memslot activity, KVM will inject a page fault due to not finding a visible slot in FNAME(walk_addr_generic), i.e. the end result is mostly same, but critically KVM will inject a fault only *after* KVM runs the vCPU with the bogus root. Waiting to inject a fault until after running the vCPU fixes a bug where KVM would bail from nested VM-Enter if L1 tried to run L2 with TDP enabled and a !visible root. Even though a bad root will *probably* lead to shutdown, (a) it's not guaranteed and (b) the CPU won't read the underlying memory until after VM-Enter succeeds. E.g. if L1 runs L2 with a VMX preemption timer value of '0', then architecturally the preemption timer VM-Exit is guaranteed to occur before the CPU executes any instruction, i.e. before the CPU needs to translate a GPA to a HPA (so long as there are no injected events with higher priority than the preemption timer). If KVM manages to get to FNAME(fetch) with a dummy root, e.g. because userspace created a memslot between installing the dummy root and handling the page fault, simply unload the MMU to allocate a new root and retry the instruction. Use KVM_REQ_MMU_FREE_OBSOLETE_ROOTS to drop the root, as invoking kvm_mmu_free_roots() while holding mmu_lock would deadlock, and conceptually the dummy root has indeeed become obsolete. The only difference versus existing usage of KVM_REQ_MMU_FREE_OBSOLETE_ROOTS is that the root has become obsolete due to memslot *creation*, not memslot deletion or movement. Reported-by: Reima Ishii <ishiir@g.ecc.u-tokyo.ac.jp> Cc: Yu Zhang <yu.c.zhang@linux.intel.com> Link: https://lore.kernel.org/r/20230729005200.1057358-6-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Sean Christopherson
|
c30e000e69 |
KVM: x86/mmu: Harden new PGD against roots without shadow pages
Harden kvm_mmu_new_pgd() against NULL pointer dereference bugs by sanity checking that the target root has an associated shadow page prior to dereferencing said shadow page. The code in question is guaranteed to only see roots with shadow pages as fast_pgd_switch() explicitly frees the current root if it doesn't have a shadow page, i.e. is a PAE root, and that in turn prevents valid roots from being cached, but that's all very subtle. Link: https://lore.kernel.org/r/20230729005200.1057358-3-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Sean Christopherson
|
c5f2d5645f |
KVM: x86/mmu: Add helper to convert root hpa to shadow page
Add a dedicated helper for converting a root hpa to a shadow page in anticipation of using a "dummy" root to handle the scenario where KVM needs to load a valid shadow root (from hardware's perspective), but the guest doesn't have a visible root to shadow. Similar to PAE roots, the dummy root won't have an associated kvm_mmu_page and will need special handling when finding a shadow page given a root. Opportunistically retrieve the root shadow page in kvm_mmu_sync_roots() *after* verifying the root is unsync (the dummy root can never be unsync). Link: https://lore.kernel.org/r/20230729005200.1057358-2-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Sean Christopherson
|
96316a0670 |
KVM: x86/mmu: Drop @slot param from exported/external page-track APIs
Refactor KVM's exported/external page-track, a.k.a. write-track, APIs to take only the gfn and do the required memslot lookup in KVM proper. Forcing users of the APIs to get the memslot unnecessarily bleeds KVM internals into KVMGT and complicates usage of the APIs. No functional change intended. Reviewed-by: Yan Zhao <yan.y.zhao@intel.com> Tested-by: Yongwei Ma <yongwei.ma@intel.com> Link: https://lore.kernel.org/r/20230729013535.1070024-28-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Sean Christopherson
|
7b574863e7 |
KVM: x86/mmu: Rename page-track APIs to reflect the new reality
Rename the page-track APIs to capture that they're all about tracking writes, now that the facade of supporting multiple modes is gone. Opportunstically replace "slot" with "gfn" in anticipation of removing the @slot param from the external APIs. No functional change intended. Tested-by: Yongwei Ma <yongwei.ma@intel.com> Link: https://lore.kernel.org/r/20230729013535.1070024-25-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Sean Christopherson
|
338068b5be |
KVM: x86/mmu: Drop infrastructure for multiple page-track modes
Drop "support" for multiple page-track modes, as there is no evidence that array-based and refcounted metadata is the optimal solution for other modes, nor is there any evidence that other use cases, e.g. for access-tracking, will be a good fit for the page-track machinery in general. E.g. one potential use case of access-tracking would be to prevent guest access to poisoned memory (from the guest's perspective). In that case, the number of poisoned pages is likely to be a very small percentage of the guest memory, and there is no need to reference count the number of access-tracking users, i.e. expanding gfn_track[] for a new mode would be grossly inefficient. And for poisoned memory, host userspace would also likely want to trap accesses, e.g. to inject #MC into the guest, and that isn't currently supported by the page-track framework. A better alternative for that poisoned page use case is likely a variation of the proposed per-gfn attributes overlay (linked), which would allow efficiently tracking the sparse set of poisoned pages, and by default would exit to userspace on access. Link: https://lore.kernel.org/all/Y2WB48kD0J4VGynX@google.com Cc: Ben Gardon <bgardon@google.com> Tested-by: Yongwei Ma <yongwei.ma@intel.com> Link: https://lore.kernel.org/r/20230729013535.1070024-24-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Sean Christopherson
|
58ea7cf700 |
KVM: x86/mmu: Move KVM-only page-track declarations to internal header
Bury the declaration of the page-track helpers that are intended only for internal KVM use in a "private" header. In addition to guarding against unwanted usage of the internal-only helpers, dropping their definitions avoids exposing other structures that should be KVM-internal, e.g. for memslots. This is a baby step toward making kvm_host.h a KVM-internal header in the very distant future. Tested-by: Yongwei Ma <yongwei.ma@intel.com> Link: https://lore.kernel.org/r/20230729013535.1070024-22-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Yan Zhao
|
d104d5bbbc |
KVM: x86: Remove the unused page-track hook track_flush_slot()
Remove ->track_remove_slot(), there are no longer any users and it's unlikely a "flush" hook will ever be the correct API to provide to an external page-track user. Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Suggested-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Yan Zhao <yan.y.zhao@intel.com> Tested-by: Yongwei Ma <yongwei.ma@intel.com> Link: https://lore.kernel.org/r/20230729013535.1070024-21-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Sean Christopherson
|
932844462a |
KVM: x86/mmu: Don't bounce through page-track mechanism for guest PTEs
Don't use the generic page-track mechanism to handle writes to guest PTEs in KVM's MMU. KVM's MMU needs access to information that should not be exposed to external page-track users, e.g. KVM needs (for some definitions of "need") the vCPU to query the current paging mode, whereas external users, i.e. KVMGT, have no ties to the current vCPU and so should never need the vCPU. Moving away from the page-track mechanism will allow dropping use of the page-track mechanism for KVM's own MMU, and will also allow simplifying and cleaning up the page-track APIs. Reviewed-by: Yan Zhao <yan.y.zhao@intel.com> Tested-by: Yongwei Ma <yongwei.ma@intel.com> Link: https://lore.kernel.org/r/20230729013535.1070024-15-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Sean Christopherson
|
eeb87272a3 |
KVM: x86/mmu: Don't rely on page-track mechanism to flush on memslot change
Call kvm_mmu_zap_all_fast() directly when flushing a memslot instead of bouncing through the page-track mechanism. KVM (unfortunately) needs to zap and flush all page tables on memslot DELETE/MOVE irrespective of whether KVM is shadowing guest page tables. This will allow changing KVM to register a page-track notifier on the first shadow root allocation, and will also allow deleting the misguided kvm_page_track_flush_slot() hook itself once KVM-GT also moves to a different method for reacting to memslot changes. No functional change intended. Cc: Yan Zhao <yan.y.zhao@intel.com> Link: https://lore.kernel.org/r/20221110014821.1548347-2-seanjc@google.com Reviewed-by: Yan Zhao <yan.y.zhao@intel.com> Tested-by: Yongwei Ma <yongwei.ma@intel.com> Link: https://lore.kernel.org/r/20230729013535.1070024-14-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Sean Christopherson
|
db0d70e610 |
KVM: x86/mmu: Move kvm_arch_flush_shadow_{all,memslot}() to mmu.c
Move x86's implementation of kvm_arch_flush_shadow_{all,memslot}() into
mmu.c, and make kvm_mmu_zap_all() static as it was globally visible only
for kvm_arch_flush_shadow_all(). This will allow refactoring
kvm_arch_flush_shadow_memslot() to call kvm_mmu_zap_all() directly without
having to expose kvm_mmu_zap_all_fast() outside of mmu.c. Keeping
everything in mmu.c will also likely simplify supporting TDX, which
intends to do zap only relevant SPTEs on memslot updates.
No functional change intended.
Suggested-by: Yan Zhao <yan.y.zhao@intel.com>
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Link: https://lore.kernel.org/r/20230729013535.1070024-13-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
||
|
Sean Christopherson
|
52e322eda3 |
KVM: x86/mmu: BUG() in rmap helpers iff CONFIG_BUG_ON_DATA_CORRUPTION=y
Introduce KVM_BUG_ON_DATA_CORRUPTION() and use it in the low-level rmap helpers to convert the existing BUG()s to WARN_ON_ONCE() when the kernel is built with CONFIG_BUG_ON_DATA_CORRUPTION=n, i.e. does NOT want to BUG() on corruption of host kernel data structures. Environments that don't have infrastructure to automatically capture crash dumps, i.e. aren't likely to enable CONFIG_BUG_ON_DATA_CORRUPTION=y, are typically better served overall by WARN-and-continue behavior (for the kernel, the VM is dead regardless), as a BUG() while holding mmu_lock all but guarantees the _best_ case scenario is a panic(). Make the BUG()s conditional instead of removing/replacing them entirely as there's a non-zero chance (though by no means a guarantee) that the damage isn't contained to the target VM, e.g. if no rmap is found for a SPTE then KVM may be double-zapping the SPTE, i.e. has already freed the memory the SPTE pointed at and thus KVM is reading/writing memory that KVM no longer owns. Link: https://lore.kernel.org/all/20221129191237.31447-1-mizhang@google.com Suggested-by: Mingwei Zhang <mizhang@google.com> Cc: David Matlack <dmatlack@google.com> Cc: Jim Mattson <jmattson@google.com> Reviewed-by: Mingwei Zhang <mizhang@google.com> Link: https://lore.kernel.org/r/20230729004722.1056172-13-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Mingwei Zhang
|
069f30c619 |
KVM: x86/mmu: Plumb "struct kvm" all the way to pte_list_remove()
Plumb "struct kvm" all the way to pte_list_remove() to allow the usage of KVM_BUG() and/or KVM_BUG_ON(). This will allow killing only the offending VM instead of doing BUG() if the kernel is built with CONFIG_BUG_ON_DATA_CORRUPTION=n, i.e. does NOT want to BUG() if KVM's data structures (rmaps) appear to be corrupted. Signed-off-by: Mingwei Zhang <mizhang@google.com> [sean: tweak changelog] Link: https://lore.kernel.org/r/20230729004722.1056172-12-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Sean Christopherson
|
870d4d4ed8 |
KVM: x86/mmu: Replace MMU_DEBUG with proper KVM_PROVE_MMU Kconfig
Replace MMU_DEBUG, which requires manually modifying KVM to enable the macro, with a proper Kconfig, KVM_PROVE_MMU. Now that pgprintk() and rmap_printk() are gone, i.e. the macro guards only KVM_MMU_WARN_ON() and won't flood the kernel logs, enabling the option for debug kernels is both desirable and feasible. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Link: https://lore.kernel.org/r/20230729004722.1056172-10-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Sean Christopherson
|
20ba462dfd |
KVM: x86/mmu: Convert "runtime" WARN_ON() assertions to WARN_ON_ONCE()
Convert all "runtime" assertions, i.e. assertions that can be triggered while running vCPUs, from WARN_ON() to WARN_ON_ONCE(). Every WARN in the MMU that is tied to running vCPUs, i.e. not contained to loading and initializing KVM, is likely to fire _a lot_ when it does trigger. E.g. if KVM ends up with a bug that causes a root to be invalidated before the page fault handler is invoked, pretty much _every_ page fault VM-Exit triggers the WARN. If a WARN is triggered frequently, the resulting spam usually causes a lot of damage of its own, e.g. consumes resources to log the WARN and pollutes the kernel log, often to the point where other useful information can be lost. In many case, the damage caused by the spam is actually worse than the bug itself, e.g. KVM can almost always recover from an unexpectedly invalid root. On the flip side, warning every time is rarely helpful for debug and triage, i.e. a single splat is usually sufficient to point a debugger in the right direction, and automated testing, e.g. syzkaller, typically runs with warn_on_panic=1, i.e. will never get past the first WARN anyways. Lastly, when an assertions fails multiple times, the stack traces in KVM are almost always identical, i.e. the full splat only needs to be captured once. And _if_ there is value in captruing information about the failed assert, a ratelimited printk() is sufficient and less likely to rack up a large amount of collateral damage. Link: https://lore.kernel.org/r/20230729004722.1056172-8-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Sean Christopherson
|
0fe6370eb3 |
KVM: x86/mmu: Rename MMU_WARN_ON() to KVM_MMU_WARN_ON()
Rename MMU_WARN_ON() to make it super obvious that the assertions are all about KVM's MMU, not the primary MMU. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Link: https://lore.kernel.org/r/20230729004722.1056172-7-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Sean Christopherson
|
58da926caa |
KVM: x86/mmu: Cleanup sanity check of SPTEs at SP free
Massage the error message for the sanity check on SPTEs when freeing a shadow page to be more verbose, and to print out all shadow-present SPTEs, not just the first SPTE encountered. Printing all SPTEs can be quite valuable for debug, e.g. highlights whether the leak is a one-off or widepsread, or possibly the result of memory corruption (something else in the kernel stomping on KVM's SPTEs). Opportunistically move the MMU_WARN_ON() into the helper itself, which will allow a future cleanup to use BUILD_BUG_ON_INVALID() as the stub for MMU_WARN_ON(). BUILD_BUG_ON_INVALID() works as intended and results in the compiler complaining about is_empty_shadow_page() not being declared. Link: https://lore.kernel.org/r/20230729004722.1056172-6-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Sean Christopherson
|
242a6dd8da |
KVM: x86/mmu: Avoid pointer arithmetic when iterating over SPTEs
Replace the pointer arithmetic used to iterate over SPTEs in is_empty_shadow_page() with more standard interger-based iteration. No functional change intended. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Link: https://lore.kernel.org/r/20230729004722.1056172-5-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Sean Christopherson
|
c4f92cfe02 |
KVM: x86/mmu: Delete the "dbg" module param
Delete KVM's "dbg" module param now that its usage in KVM is gone (it used to guard pgprintk() and rmap_printk()). Link: https://lore.kernel.org/r/20230729004722.1056172-4-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Sean Christopherson
|
350c49fdea |
KVM: x86/mmu: Delete rmap_printk() and all its usage
Delete rmap_printk() so that MMU_WARN_ON() and MMU_DEBUG can be morphed into something that can be regularly enabled for debug kernels. The information provided by rmap_printk() isn't all that useful now that the rmap and unsync code is mature, as the prints are simultaneously too verbose (_lots_ of message) and yet not verbose enough to be helpful for debug (most instances print just the SPTE pointer/value, which is rarely sufficient to root cause anything but trivial bugs). Alternatively, rmap_printk() could be reworked to into tracepoints, but it's not clear there is a real need as rmap bugs rarely escape initial development, and when bugs do escape to production, they are often edge cases and/or reside in code that isn't directly related to the rmaps. In other words, the problems with rmap_printk() being unhelpful also apply to tracepoints. And deleting rmap_printk() doesn't preclude adding tracepoints in the future. Link: https://lore.kernel.org/r/20230729004722.1056172-3-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Sean Christopherson
|
a98b889492 |
KVM: x86/mmu: Delete pgprintk() and all its usage
Delete KVM's pgprintk() and all its usage, as the code is very prone to bitrot due to being buried behind MMU_DEBUG, and the functionality has been rendered almost entirely obsolete by the tracepoints KVM has gained over the years. And for the situations where the information provided by KVM's tracepoints is insufficient, pgprintk() rarely fills in the gaps, and is almost always far too noisy, i.e. developers end up implementing custom prints anyways. Link: https://lore.kernel.org/r/20230729004722.1056172-2-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Sean Christopherson
|
d09f711233 |
KVM: x86/mmu: Guard against collision with KVM-defined PFERR_IMPLICIT_ACCESS
Add an assertion in kvm_mmu_page_fault() to ensure the error code provided
by hardware doesn't conflict with KVM's software-defined IMPLICIT_ACCESS
flag. In the unlikely scenario that future hardware starts using bit 48
for a hardware-defined flag, preserving the bit could result in KVM
incorrectly interpreting the unknown flag as KVM's IMPLICIT_ACCESS flag.
WARN so that any such conflict can be surfaced to KVM developers and
resolved, but otherwise ignore the bit as KVM can't possibly rely on a
flag it knows nothing about.
Fixes:
|
||
|
Paolo Bonzini
|
6d5e3c318a |
KVM x86 changes for 6.6:
- Misc cleanups
- Retry APIC optimized recalculation if a vCPU is added/enabled
- Overhaul emergency reboot code to bring SVM up to par with VMX, tie the
"emergency disabling" behavior to KVM actually being loaded, and move all of
the logic within KVM
- Fix user triggerable WARNs in SVM where KVM incorrectly assumes the TSC
ratio MSR can diverge from the default iff TSC scaling is enabled, and clean
up related code
- Add a framework to allow "caching" feature flags so that KVM can check if
the guest can use a feature without needing to search guest CPUID
-----BEGIN PGP SIGNATURE-----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=yGM1
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-misc-6.6' of https://github.com/kvm-x86/linux into HEAD
KVM x86 changes for 6.6:
- Misc cleanups
- Retry APIC optimized recalculation if a vCPU is added/enabled
- Overhaul emergency reboot code to bring SVM up to par with VMX, tie the
"emergency disabling" behavior to KVM actually being loaded, and move all of
the logic within KVM
- Fix user triggerable WARNs in SVM where KVM incorrectly assumes the TSC
ratio MSR can diverge from the default iff TSC scaling is enabled, and clean
up related code
- Add a framework to allow "caching" feature flags so that KVM can check if
the guest can use a feature without needing to search guest CPUID
|
||
|
Paolo Bonzini
|
0d15bf966d |
Common KVM changes for 6.6:
- Wrap kvm_{gfn,hva}_range.pte in a union to allow mmu_notifier events to pass
action specific data without needing to constantly update the main handlers.
- Drop unused function declarations
-----BEGIN PGP SIGNATURE-----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=n819
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-generic-6.6' of https://github.com/kvm-x86/linux into HEAD
Common KVM changes for 6.6:
- Wrap kvm_{gfn,hva}_range.pte in a union to allow mmu_notifier events to pass
action specific data without needing to constantly update the main handlers.
- Drop unused function declarations
|
||
|
Sean Christopherson
|
ccf31d6e6c |
KVM: x86/mmu: Use KVM-governed feature framework to track "GBPAGES enabled"
Use the governed feature framework to track whether or not the guest can use 1GiB pages, and drop the one-off helper that wraps the surprisingly non-trivial logic surrounding 1GiB page usage in the guest. No functional change intended. Reviewed-by: Yuan Yao <yuan.yao@intel.com> Link: https://lore.kernel.org/r/20230815203653.519297-3-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
||
|
Sean Christopherson
|
3e1efe2b67 |
KVM: Wrap kvm_{gfn,hva}_range.pte in a per-action union
Wrap kvm_{gfn,hva}_range.pte in a union so that future notifier events can
pass event specific information up and down the stack without needing to
constantly expand and churn the APIs. Lockless aging of SPTEs will pass
around a bitmap, and support for memory attributes will pass around the
new attributes for the range.
Add a "KVM_NO_ARG" placeholder to simplify handling events without an
argument (creating a dummy union variable is midly annoying).
Opportunstically drop explicit zero-initialization of the "pte" field, as
omitting the field (now a union) has the same effect.
Cc: Yu Zhao <yuzhao@google.com>
Link: https://lore.kernel.org/all/CAOUHufagkd2Jk3_HrVoFFptRXM=hX2CV8f+M-dka-hJU4bP8kw@mail.gmail.com
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Acked-by: Yu Zhao <yuzhao@google.com>
Link: https://lore.kernel.org/r/20230729004144.1054885-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
||
|
David Matlack
|
619b507244 |
KVM: Move kvm_arch_flush_remote_tlbs_memslot() to common code
Move kvm_arch_flush_remote_tlbs_memslot() to common code and drop "arch_" from the name. kvm_arch_flush_remote_tlbs_memslot() is just a range-based TLB invalidation where the range is defined by the memslot. Now that kvm_flush_remote_tlbs_range() can be called from common code we can just use that and drop a bunch of duplicate code from the arch directories. Note this adds a lockdep assertion for slots_lock being held when calling kvm_flush_remote_tlbs_memslot(), which was previously only asserted on x86. MIPS has calls to kvm_flush_remote_tlbs_memslot(), but they all hold the slots_lock, so the lockdep assertion continues to hold true. Also drop the CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT ifdef gating kvm_flush_remote_tlbs_memslot(), since it is no longer necessary. Signed-off-by: David Matlack <dmatlack@google.com> Signed-off-by: Raghavendra Rao Ananta <rananta@google.com> Reviewed-by: Gavin Shan <gshan@redhat.com> Reviewed-by: Shaoqin Huang <shahuang@redhat.com> Acked-by: Anup Patel <anup@brainfault.org> Acked-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20230811045127.3308641-7-rananta@google.com |
||
|
David Matlack
|
d478899605 |
KVM: Allow range-based TLB invalidation from common code
Make kvm_flush_remote_tlbs_range() visible in common code and create a default implementation that just invalidates the whole TLB. This paves the way for several future features/cleanups: - Introduction of range-based TLBI on ARM. - Eliminating kvm_arch_flush_remote_tlbs_memslot() - Moving the KVM/x86 TDP MMU to common code. No functional change intended. Signed-off-by: David Matlack <dmatlack@google.com> Signed-off-by: Raghavendra Rao Ananta <rananta@google.com> Reviewed-by: Gavin Shan <gshan@redhat.com> Reviewed-by: Shaoqin Huang <shahuang@redhat.com> Reviewed-by: Anup Patel <anup@brainfault.org> Acked-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20230811045127.3308641-6-rananta@google.com |
||
|
Like Xu
|
1d6664fadd |
KVM: x86: Use sysfs_emit() instead of sprintf()
Use sysfs_emit() instead of the sprintf() for sysfs entries. sysfs_emit() knows the maximum of the temporary buffer used for outputting sysfs content and avoids overrunning the buffer length. Signed-off-by: Like Xu <likexu@tencent.com> Link: https://lore.kernel.org/r/20230625073438.57427-1-likexu@tencent.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
||
|
Paolo Bonzini
|
255006adb3 |
KVM VMX changes for 6.5:
- Fix missing/incorrect #GP checks on ENCLS - Use standard mmu_notifier hooks for handling APIC access page - Misc cleanups -----BEGIN PGP SIGNATURE----- iQJGBAABCgAwFiEEMHr+pfEFOIzK+KY1YJEiAU0MEvkFAmSaLDYSHHNlYW5qY0Bn b29nbGUuY29tAAoJEGCRIgFNDBL5ovYP/ib86UG9QXwoEKx0mIyLQ5q1jD+StvxH 18SIH62+MXAtmz2E+EmXIySW76diOKCngApJ11WTERPwpZYEpcITh2D2Jp/vwgk5 xUPK+WKYQs1SGpJu3wXhLE1u6mB7X9p7EaXRSKG67P7YK09gTaOik1/3h6oNrGO+ KI06reCQN1PstKTfrZXxYpRlfDc761YaAmSZ79Bg+bK9PisFqme7TJ2mAqNZPFPd E7ho/UOEyWRSyd5VMsuOUB760pMQ9edKrs+38xNDp5N+0Fh0ItTjuAcd2KVWMZyW Fk+CJq4kCqTlEik5OwcEHsTGJGBFscGPSO+T0YtVfSZDdtN/rHN7l8RGquOebVTG Ldm5bg4agu4lXsqqzMxn8J9SkbNg3xno79mMSc2185jS2HLt5Hu6PzQnQ2tEtHJQ IuovmssHOVKDoYODOg0tq8UMydgT3hAvC7YJCouubCjxUUw+22nhN3EDuAhbJhtT DgQNGT7GmsrKIWLEjbm6EpLLOdJdB7/U1MrEshLS015a/DUz4b3ZGYApneifJL8h nGE2Wu+36xGUVNLgDMdvd+R17WdyQa+f+9KjUGy71KelFV4vI4A3JwvH0aIsTyHZ LGlQBZqelc66GYwMiqVC0GYGRtrdgygQopfstvZJ3rYiHZV/mdhB5A0T4J2Xvh2Q bnDNzsSFdsH5 =PjYj -----END PGP SIGNATURE----- Merge tag 'kvm-x86-vmx-6.5' of https://github.com/kvm-x86/linux into HEAD KVM VMX changes for 6.5: - Fix missing/incorrect #GP checks on ENCLS - Use standard mmu_notifier hooks for handling APIC access page - Misc cleanups |
||
|
Paolo Bonzini
|
88de4b9480 |
KVM x86/mmu changes for 6.5:
- Add back a comment about the subtle side effect of try_cmpxchg64() in
tdp_mmu_set_spte_atomic()
- Add an assertion in __kvm_mmu_invalidate_addr() to verify that the target
KVM MMU is the current MMU
- Add a "never" option to effectively avoid creating NX hugepage recovery
threads
-----BEGIN PGP SIGNATURE-----
iQJGBAABCgAwFiEEMHr+pfEFOIzK+KY1YJEiAU0MEvkFAmSaGrgSHHNlYW5qY0Bn
b29nbGUuY29tAAoJEGCRIgFNDBL5KG0P/iFP2w0PAUQgIgbWeOWiIh1ZXq9JjjX+
GAjii1deMFzuEjOWTzWUY2FDE7Mzea5hsVoOmLY7kb9jwYwPJDhaKlaQbNLYgFAr
uJqGg8ZMRIbXGBhX98Z4qrUzqKwjgKDzswu/Fg6xZOhVLKNoIkV/YwVo3b1dZ8+e
ecctLJFtmV/xa7cFyOTnB9rDgUuBXc2jB7+7eza6+oFlhO/S1VB2XPBq+IT3KoPO
F40YQW05ortC8IaFHHkJSRTfVM8v+2WDzrwpJUtyalDAie4hhy08svCEX2cXEeYX
qWgjzPzQLM6AcFhb491M1BjFiEYuh5qhvETK+1PiIXTTq+xaIDb1HSM9BexkSVBR
scHt8RdamPq3noqZQgMEIzVHp5L3k72oy1iP0k2uIzirMW9v+M3MWLsQuDV+CaLU
+EYQozWNEcDO7b/gpYsGWG9Me11GibqIJeyLJFU7HwAmACBiRyy6RD+RS7NMGzHB
9HT6TkSbPc1+cLJ5npCFwZBkj+vwjPs3lEjVQkiGZtavt1nWHfE8ASdv+hNwnJg/
Xz+PVdKh6g0A3mUqxz/ZuDTp3Hfz3jL1roYFGIAUXAjaebih0MUc/CYf84VvoqIq
IymI37EoK9CnMszQGJBc2IeB+Bc8KptYCs+M0WYNQ7MPcLIJHKpIzFPosRb2qyOj
/GEYFjfFwaPR
=FM8H
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-mmu-6.5' of https://github.com/kvm-x86/linux into HEAD
KVM x86/mmu changes for 6.5:
- Add back a comment about the subtle side effect of try_cmpxchg64() in
tdp_mmu_set_spte_atomic()
- Add an assertion in __kvm_mmu_invalidate_addr() to verify that the target
KVM MMU is the current MMU
- Add a "never" option to effectively avoid creating NX hugepage recovery
threads
|
||
|
Sean Christopherson
|
0b210faf33 |
KVM: x86/mmu: Add "never" option to allow sticky disabling of nx_huge_pages
Add a "never" option to the nx_huge_pages module param to allow userspace to do a one-way hard disabling of the mitigation, and don't create the per-VM recovery threads when the mitigation is hard disabled. Letting userspace pinky swear that userspace doesn't want to enable NX mitigation (without reloading KVM) allows certain use cases to avoid the latency problems associated with spawning a kthread for each VM. E.g. in FaaS use cases, the guest kernel is trusted and the host may create 100+ VMs per logical CPU, which can result in 100ms+ latencies when a burst of VMs is created. Reported-by: Li RongQing <lirongqing@baidu.com> Closes: https://lore.kernel.org/all/1679555884-32544-1-git-send-email-lirongqing@baidu.com Cc: Yong He <zhuangel570@gmail.com> Cc: Robert Hoo <robert.hoo.linux@gmail.com> Cc: Kai Huang <kai.huang@intel.com> Reviewed-by: Robert Hoo <robert.hoo.linux@gmail.com> Acked-by: Kai Huang <kai.huang@intel.com> Tested-by: Luiz Capitulino <luizcap@amazon.com> Reviewed-by: Li RongQing <lirongqing@baidu.com> Link: https://lore.kernel.org/r/20230602005859.784190-1-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
||
|
Sean Christopherson
|
0a3869e14d |
KVM: x86/mmu: Trigger APIC-access page reload iff vendor code cares
Request an APIC-access page reload when the backing page is migrated (or unmapped) if and only if vendor code actually plugs the backing pfn into structures that reside outside of KVM's MMU. This avoids kicking all vCPUs in the (hopefully infrequent) scenario where the backing page is migrated/invalidated. Unlike VMX's APICv, SVM's AVIC doesn't plug the backing pfn directly into the VMCB and so doesn't need a hook to invalidate an out-of-MMU "mapping". Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Link: https://lore.kernel.org/r/20230602011518.787006-4-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
||
|
Sean Christopherson
|
0a8a5f2c8c |
KVM: x86: Use standard mmu_notifier invalidate hooks for APIC access page
Now that KVM honors past and in-progress mmu_notifier invalidations when reloading the APIC-access page, use KVM's "standard" invalidation hooks to trigger a reload and delete the one-off usage of invalidate_range(). Aside from eliminating one-off code in KVM, dropping KVM's use of invalidate_range() will allow common mmu_notifier to redefine the API to be more strictly focused on invalidating secondary TLBs that share the primary MMU's page tables. Suggested-by: Jason Gunthorpe <jgg@nvidia.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Link: https://lore.kernel.org/r/20230602011518.787006-3-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
||
|
Sean Christopherson
|
817fa99836 |
KVM: x86/mmu: Grab memslot for correct address space in NX recovery worker
Factor in the address space (non-SMM vs. SMM) of the target shadow page when recovering potential NX huge pages, otherwise KVM will retrieve the wrong memslot when zapping shadow pages that were created for SMM. The bug most visibly manifests as a WARN on the memslot being non-NULL, but the worst case scenario is that KVM could unaccount the shadow page without ensuring KVM won't install a huge page, i.e. if the non-SMM slot is being dirty logged, but the SMM slot is not. ------------[ cut here ]------------ WARNING: CPU: 1 PID: 3911 at arch/x86/kvm/mmu/mmu.c:7015 kvm_nx_huge_page_recovery_worker+0x38c/0x3d0 [kvm] CPU: 1 PID: 3911 Comm: kvm-nx-lpage-re RIP: 0010:kvm_nx_huge_page_recovery_worker+0x38c/0x3d0 [kvm] RSP: 0018:ffff99b284f0be68 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff99b284edd000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff9271397024e0 R08: 0000000000000000 R09: ffff927139702450 R10: 0000000000000000 R11: 0000000000000001 R12: ffff99b284f0be98 R13: 0000000000000000 R14: ffff9270991fcd80 R15: 0000000000000003 FS: 0000000000000000(0000) GS:ffff927f9f640000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f0aacad3ae0 CR3: 000000088fc2c005 CR4: 00000000003726e0 Call Trace: <TASK> __pfx_kvm_nx_huge_page_recovery_worker+0x10/0x10 [kvm] kvm_vm_worker_thread+0x106/0x1c0 [kvm] kthread+0xd9/0x100 ret_from_fork+0x2c/0x50 </TASK> ---[ end trace 0000000000000000 ]--- This bug was exposed by commit |
||
|
Like Xu
|
762b33eb90 |
KVM: x86/mmu: Assert on @mmu in the __kvm_mmu_invalidate_addr()
Add assertion to track that "mmu == vcpu->arch.mmu" is always true in the context of __kvm_mmu_invalidate_addr(). for_each_shadow_entry_using_root() and kvm_sync_spte() operate on vcpu->arch.mmu, but the only reason that doesn't cause explosions is because handle_invept() frees roots instead of doing a manual invalidation. As of now, there are no major roadblocks to switching INVEPT emulation over to use kvm_mmu_invalidate_addr(). Suggested-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Like Xu <likexu@tencent.com> Link: https://lore.kernel.org/r/20230523032947.60041-1-likexu@tencent.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
||
|
Paolo Bonzini
|
48b1893ae3 |
KVM x86 PMU changes for 6.4:
- Disallow virtualizing legacy LBRs if architectural LBRs are available,
the two are mutually exclusive in hardware
- Disallow writes to immutable feature MSRs (notably PERF_CAPABILITIES)
after KVM_RUN, and overhaul the vmx_pmu_caps selftest to better
validate PERF_CAPABILITIES
- Apply PMU filters to emulated events and add test coverage to the
pmu_event_filter selftest
- Misc cleanups and fixes
-----BEGIN PGP SIGNATURE-----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=m18F
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-pmu-6.4' of https://github.com/kvm-x86/linux into HEAD
KVM x86 PMU changes for 6.4:
- Disallow virtualizing legacy LBRs if architectural LBRs are available,
the two are mutually exclusive in hardware
- Disallow writes to immutable feature MSRs (notably PERF_CAPABILITIES)
after KVM_RUN, and overhaul the vmx_pmu_caps selftest to better
validate PERF_CAPABILITIES
- Apply PMU filters to emulated events and add test coverage to the
pmu_event_filter selftest
- Misc cleanups and fixes
|
||
|
Paolo Bonzini
|
807b758496 |
KVM x86 MMU changes for 6.4:
- Tweak FNAME(sync_spte) to avoid unnecessary writes+flushes when the
guest is only adding new PTEs
- Overhaul .sync_page() and .invlpg() to share the .sync_page()
implementation, i.e. utilize .sync_page()'s optimizations when emulating
invalidations
- Clean up the range-based flushing APIs
- Revamp the TDP MMU's reaping of Accessed/Dirty bits to clear a single
A/D bit using a LOCK AND instead of XCHG, and skip all of the "handle
changed SPTE" overhead associated with writing the entire entry
- Track the number of "tail" entries in a pte_list_desc to avoid having
to walk (potentially) all descriptors during insertion and deletion,
which gets quite expensive if the guest is spamming fork()
- Misc cleanups
-----BEGIN PGP SIGNATURE-----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=zb4u
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-mmu-6.4' of https://github.com/kvm-x86/linux into HEAD
KVM x86 MMU changes for 6.4:
- Tweak FNAME(sync_spte) to avoid unnecessary writes+flushes when the
guest is only adding new PTEs
- Overhaul .sync_page() and .invlpg() to share the .sync_page()
implementation, i.e. utilize .sync_page()'s optimizations when emulating
invalidations
- Clean up the range-based flushing APIs
- Revamp the TDP MMU's reaping of Accessed/Dirty bits to clear a single
A/D bit using a LOCK AND instead of XCHG, and skip all of the "handle
changed SPTE" overhead associated with writing the entire entry
- Track the number of "tail" entries in a pte_list_desc to avoid having
to walk (potentially) all descriptors during insertion and deletion,
which gets quite expensive if the guest is spamming fork()
- Misc cleanups
|
||
|
Sean Christopherson
|
cf9f4c0eb1 |
KVM: x86/mmu: Refresh CR0.WP prior to checking for emulated permission faults
Refresh the MMU's snapshot of the vCPU's CR0.WP prior to checking for
permission faults when emulating a guest memory access and CR0.WP may be
guest owned. If the guest toggles only CR0.WP and triggers emulation of
a supervisor write, e.g. when KVM is emulating UMIP, KVM may consume a
stale CR0.WP, i.e. use stale protection bits metadata.
Note, KVM passes through CR0.WP if and only if EPT is enabled as CR0.WP
is part of the MMU role for legacy shadow paging, and SVM (NPT) doesn't
support per-bit interception controls for CR0. Don't bother checking for
EPT vs. NPT as the "old == new" check will always be true under NPT, i.e.
the only cost is the read of vcpu->arch.cr4 (SVM unconditionally grabs CR0
from the VMCB on VM-Exit).
Reported-by: Mathias Krause <minipli@grsecurity.net>
Link: https://lkml.kernel.org/r/677169b4-051f-fcae-756b-9a3e1bb9f8fe%40grsecurity.net
Fixes:
|
||
|
Sean Christopherson
|
9ed3bf4112 |
KVM: x86/mmu: Move filling of Hyper-V's TLB range struct into Hyper-V code
Refactor Hyper-V's range-based TLB flushing API to take a gfn+nr_pages pair instead of a struct, and bury said struct in Hyper-V specific code. Passing along two params generates much better code for the common case where KVM is _not_ running on Hyper-V, as forwarding the flush on to Hyper-V's hv_flush_remote_tlbs_range() from kvm_flush_remote_tlbs_range() becomes a tail call. Cc: David Matlack <dmatlack@google.com> Reviewed-by: David Matlack <dmatlack@google.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Link: https://lore.kernel.org/r/20230405003133.419177-3-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
||
|
Sean Christopherson
|
8a1300ff95 |
KVM: x86: Rename Hyper-V remote TLB hooks to match established scheme
Rename the Hyper-V hooks for TLB flushing to match the naming scheme used by all the other TLB flushing hooks, e.g. in kvm_x86_ops, vendor code, arch hooks from common code, etc. Reviewed-by: David Matlack <dmatlack@google.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Link: https://lore.kernel.org/r/20230405003133.419177-2-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
||
|
Sean Christopherson
|
fb3146b4dc |
KVM: x86: Add a helper to query whether or not a vCPU has ever run
Add a helper to query if a vCPU has run so that KVM doesn't have to open code the check on last_vmentry_cpu being set to a magic value. No functional change intended. Suggested-by: Xiaoyao Li <xiaoyao.li@intel.com> Cc: Like Xu <like.xu.linux@gmail.com> Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com> Link: https://lore.kernel.org/r/20230311004618.920745-3-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
||
|
Paolo Bonzini
|
2fdcc1b324 |
KVM: x86/mmu: Avoid indirect call for get_cr3
Most of the time, calls to get_guest_pgd result in calling kvm_read_cr3 (the exception is only nested TDP). Hardcode the default instead of using the get_cr3 function, avoiding a retpoline if they are enabled. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Mathias Krause <minipli@grsecurity.net> Link: https://lore.kernel.org/r/20230322013731.102955-2-minipli@grsecurity.net Signed-off-by: Sean Christopherson <seanjc@google.com> |
||
|
Sean Christopherson
|
f3d90f901d |
KVM: x86/mmu: Clean up mmu.c functions that put return type on separate line
Adjust a variety of functions in mmu.c to put the function return type on the same line as the function declaration. As stated in the Linus specification: But the "on their own line" is complete garbage to begin with. That will NEVER be a kernel rule. We should never have a rule that assumes things are so long that they need to be on multiple lines. We don't put function return types on their own lines either, even if some other projects have that rule (just to get function names at the beginning of lines or some other odd reason). Leave the functions generated by BUILD_MMU_ROLE_REGS_ACCESSOR() as-is, that code is basically illegible no matter how it's formatted. No functional change intended. Link: https://lore.kernel.org/mm-commits/CAHk-=wjS-Jg7sGMwUPpDsjv392nDOOs0CtUtVkp=S6Q7JzFJRw@mail.gmail.com Signed-off-by: Ben Gardon <bgardon@google.com> Link: https://lore.kernel.org/r/20230202182809.1929122-4-bgardon@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> |