rdtgroup_init() needs exposing to the rest of the kernel so that arch code can
call it once it lives in core code. As this is one of the few functions
exposed, rename it to have "resctrl" in the name. The same goes for the exit
call.
Rename x86's arch code init functions for RDT to have an arch prefix to make
it clear these are part of the architecture code.
Co-developed-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-12-james.morse@arm.com
update_cpu_closid_rmid() takes a struct rdtgroup as an argument, which it uses
to update the local CPUs default pqr values. This is a problem once the
resctrl parts move out to /fs/, as the arch code cannot poke around inside
struct rdtgroup.
Rename update_cpu_closid_rmid() as resctrl_arch_sync_cpus_defaults() to be
used as the target of an IPI, and pass the effective CLOSID and RMID in a new
struct.
Co-developed-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-11-james.morse@arm.com
rdtgroup_rmdir_ctrl() and rdtgroup_rmdir_mon() set the per-CPU pqr_state for
CPUs that were part of the rmdir()'d group.
Another architecture might not have a 'pqr_state', its hardware may need the
values in a different format. MPAM's equivalent of RMID values are not unique,
and always need the CLOSID to be provided too.
There is only one caller that modifies a single value, (rdtgroup_rmdir_mon()).
MPAM always needs both CLOSID and RMID for the hardware value as these are
written to the same system register.
As rdtgroup_rmdir_mon() has the CLOSID on hand, only provide a helper to set
both values. These values are read by __resctrl_sched_in(), but may be written
by a different CPU without any locking, add READ/WRTE_ONCE() to avoid torn
values.
Co-developed-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-10-james.morse@arm.com
The struct rdt_resource default_ctrl is used by both the architecture code for
resetting the hardware controls, and sometimes by the filesystem code as the
default value for the schema, unless the bandwidth software controller is in
use.
Having the default exposed by the architecture code causes unnecessary
duplication for each architecture as the default value must be specified, but
can be derived from other schema properties. Now that the maximum bandwidth is
explicitly described, resctrl can derive the default value from the schema
format and the other resource properties.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-9-james.morse@arm.com
__rdt_get_mem_config_amd() and __get_mem_config_intel() both use the
default_ctrl property as a maximum value. This is because the MBA schema works
differently between these platforms. Doing this complicates determining
whether the default_ctrl property belongs to the arch code, or can be derived
from the schema format.
Deriving the maximum or default value from the schema format would avoid the
architecture code having to tell resctrl such obvious things as the maximum
percentage is 100, and the maximum bitmap is all ones.
Maximum bandwidth is always going to vary per platform. Add max_bw as
a special case. This is currently used for the maximum MBA percentage on Intel
platforms, but can be removed from the architecture code if 'percentage'
becomes a schema format resctrl supports directly.
This value isn't needed for other schema formats.
This will allow the default_ctrl to be generated from the schema properties
when it is needed.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-8-james.morse@arm.com
The resctrl architecture code provides a data_width for the controls of each
resource. This is used to zero pad all control values in the schemata file so
they appear in columns. The same is done with the resource names to complete
the visual effect. e.g.
| SMBA:0=2048
| L3:0=00ff
AMD platforms discover their maximum bandwidth for the MB resource from
firmware, but hard-code the data_width to 4. If the maximum bandwidth requires
more digits - the tabular format is silently broken. This is also broken when
the mba_MBps mount option is used as the field width isn't updated. If new
schema are added resctrl will need to be able to determine the maximum width.
The benefit of this pretty-printing is questionable.
Instead of handling runtime discovery of the data_width for AMD platforms,
remove the feature. These fields are always zero padded so should be harmless
to remove if the whole field has been treated as a number. In the above
example, this would now look like this:
| SMBA:0=2048
| L3:0=ff
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-7-james.morse@arm.com
Resctrl's architecture code gets to specify a format string that is
used when printing schema entries. This is expected to be one of two
values that the filesystem code supports.
Setting this format string allows the architecture code to change
the ABI resctrl presents to user-space.
Instead, use the schema format enum to choose which format string to
use.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-6-james.morse@arm.com
Resctrl's architecture code gets to specify a function pointer that is used
when parsing schema entries. This is expected to be one of two helpers from
the filesystem code.
Setting this function pointer allows the architecture code to change the ABI
resctrl presents to user-space, and forces resctrl to expose these helpers.
Instead, add a schema format enum to choose which schema parser to use. This
allows the helpers to be made static and the structs used for passing
arguments moved out of shared headers.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-5-james.morse@arm.com
The resctrl arch code specifies whether a resource controls a cache or memory
using the fflags field. This field is then used by resctrl to determine which
files should be exposed in the filesystem.
Allowing the architecture to pick this value means the RFTYPE_ flags have to
be in a shared header, and allows an architecture to create a combination that
resctrl does not support.
Remove the fflags field, and pick the value based on the resource id.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-4-james.morse@arm.com
Resctrl occasionally wants to know something about a specific resource, in
these cases it reaches into the arch code's rdt_resources_all[] array.
Once the filesystem parts of resctrl are moved to /fs/, this means it will
need visibility of the architecture specific struct rdt_hw_resource
definition, and the array of all resources. All architectures would also need
a r_resctrl member in this struct.
Instead, abstract this via a helper to allow architectures to do different
things here. Move the level enum to the resctrl header and add a helper to
retrieve the struct rdt_resource by 'rid'.
resctrl_arch_get_resource() should not return NULL for any value in the enum,
it may instead return a dummy resource that is !alloc_enabled && !mon_enabled.
Co-developed-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-3-james.morse@arm.com
Commit
6eac36bb9e ("x86/resctrl: Allocate the cleanest CLOSID by searching closid_num_dirty_rmid")
added logic that causes resctrl to search for the CLOSID with the fewest dirty
cache lines when creating a new control group, if requested by the arch code.
This depends on the values read from the llc_occupancy counters. The logic is
applicable to architectures where the CLOSID effectively forms part of the
monitoring identifier and so do not allow complete freedom to choose an unused
monitoring identifier for a given CLOSID.
This support missed that some platforms may not have these counters. This
causes a NULL pointer dereference when creating a new control group as the
array was not allocated by dom_data_init().
As this feature isn't necessary on platforms that don't have cache occupancy
monitors, add this to the check that occurs when a new control group is
allocated.
Fixes: 6eac36bb9e ("x86/resctrl: Allocate the cleanest CLOSID by searching closid_num_dirty_rmid")
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-2-james.morse@arm.com
Using RCU lifetime rules to access kernfs_node::name can avoid the
trouble with kernfs_rename_lock in kernfs_name() and kernfs_path_from_node()
if the fs was created with KERNFS_ROOT_INVARIANT_PARENT. This is usefull
as it allows to implement kernfs_path_from_node() only with RCU
protection and avoiding kernfs_rename_lock. The lock is only required if
the __parent node can be changed and the function requires an unchanged
hierarchy while it iterates from the node to its parent.
The change is needed to allow the lookup of the node's path
(kernfs_path_from_node()) from context which runs always with disabled
preemption and or interrutps even on PREEMPT_RT. The problem is that
kernfs_rename_lock becomes a sleeping lock on PREEMPT_RT.
I went through all ::name users and added the required access for the lookup
with a few extensions:
- rdtgroup_pseudo_lock_create() drops all locks and then uses the name
later on. resctrl supports rename with different parents. Here I made
a temporal copy of the name while it is used outside of the lock.
- kernfs_rename_ns() accepts NULL as new_parent. This simplifies
sysfs_move_dir_ns() where it can set NULL in order to reuse the current
name.
- kernfs_rename_ns() is only using kernfs_rename_lock if the parents are
different. All users use either kernfs_rwsem (for stable path view) or
just RCU for the lookup. The ::name uses always RCU free.
Use RCU lifetime guarantees to access kernfs_node::name.
Suggested-by: Tejun Heo <tj@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Reported-by: syzbot+6ea37e2e6ffccf41a7e6@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/lkml/67251dc6.050a0220.529b6.015e.GAE@google.com/
Reported-by: Hillf Danton <hdanton@sina.com>
Closes: https://lore.kernel.org/20241102001224.2789-1-hdanton@sina.com
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20250213145023.2820193-7-bigeasy@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kernfs_rename_lock is used to obtain stable kernfs_node::{name|parent}
pointer. This is a preparation to access kernfs_node::parent under RCU
and ensure that the pointer remains stable under the RCU lifetime
guarantees.
For a complete path, as it is done in kernfs_path_from_node(), the
kernfs_rename_lock is still required in order to obtain a stable parent
relationship while computing the relevant node depth. This must not
change while the nodes are inspected in order to build the path.
If the kernfs user never moves the nodes (changes the parent) then the
kernfs_rename_lock is not required and the RCU guarantees are
sufficient. This "restriction" can be set with
KERNFS_ROOT_INVARIANT_PARENT. Otherwise the lock is required.
Rename kernfs_node::parent to kernfs_node::__parent to denote the RCU
access and use RCU accessor while accessing the node.
Make cgroup use KERNFS_ROOT_INVARIANT_PARENT since the parent here can
not change.
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20250213145023.2820193-6-bigeasy@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
use the generic struct x86_cpu_id thing
- Remove magic naked numbers for CPUID functions and use proper defines of the
prefix CPUID_LEAF_*. Consolidate some of the crazy use around the tree
- Smaller cleanups and improvements
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmePjeIACgkQEsHwGGHe
VUqRBA//TinKFcWagaQB3lsnoBRwqyg6JJZIBNMF9sBMDD9HnvEZ/JduC+3+g1rx
iztuCmRSgQsi/QvRaEFNuDMOgk6gACyXxi7Uf6eXsQkSlsZFViaqbXsy9kqslRbl
7QP1NS1sfdSd42JPp2UZT/lg9kluuVnn5b40zZIwy2AAzwrNFfZAS4Yg7Qe4XQDF
xBcHi8MAF+LTm5Tv0hLmx2UcfZLhi7hXy8mTAIFS0Liww+Y5qaam33xw9KxNU5lZ
tVepzY5my43pRs4MB1CvaQCiZ84GxvAVqz3JYsg5YhVp45xh7P2WtjBeeOqLljaW
MkWnDLOmlaD4Y0kL4QA3ReyBVux54RbDGKC0E/t5fwYlk3dQ7gYwSEvh5358R+0z
kwxw3NdnNngoLRXAX45EonSxj36jb6KCBHAGqXSfL73OOt30RWCqknEnixcOp/BP
chNxCiIx7qko+rAYOD62QkguEEPFdb8roeayhIKtiKL5zUwQAr+jt/pKVx2htWLi
xxqSaVoCFu4edWpsEJnanqhS0Es0v7YiBU3jDC37rZJ+dtzf0C2ewD7Nb1g+wUTn
NzDkmt58hQW4jBxoxHBIclLfhEETISTEGAAObTa5I5r8IDb7Dv+ZnSv7RfjoR9fL
RWMz1bJ1Scem+Fx7fc/IRJFSElC41giSwFlhThHdAzI1m95zJN8=
=9Hdg
-----END PGP SIGNATURE-----
Merge tag 'x86_cpu_for_v6.14_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpuid updates from Borislav Petkov:
- Remove the less generic CPU matching infra around struct x86_cpu_desc
and use the generic struct x86_cpu_id thing
- Remove magic naked numbers for CPUID functions and use proper defines
of the prefix CPUID_LEAF_*. Consolidate some of the crazy use around
the tree
- Smaller cleanups and improvements
* tag 'x86_cpu_for_v6.14_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Make all all CPUID leaf names consistent
x86/fpu: Remove unnecessary CPUID level check
x86/fpu: Move CPUID leaf definitions to common code
x86/tsc: Remove CPUID "frequency" leaf magic numbers.
x86/tsc: Move away from TSC leaf magic numbers
x86/cpu: Move TSC CPUID leaf definition
x86/cpu: Refresh DCA leaf reading code
x86/cpu: Remove unnecessary MwAIT leaf checks
x86/cpu: Use MWAIT leaf definition
x86/cpu: Move MWAIT leaf definition to common header
x86/cpu: Remove 'x86_cpu_desc' infrastructure
x86/cpu: Move AMD erratum 1386 table over to 'x86_cpu_id'
x86/cpu: Replace PEBS use of 'x86_cpu_desc' use with 'x86_cpu_id'
x86/cpu: Expose only stepping min/max interface
x86/cpu: Introduce new microcode matching helper
x86/cpufeature: Document cpu_feature_enabled() as the default to use
x86/paravirt: Remove the WBINVD callback
x86/cpufeatures: Free up unused feature bits
The "mba_MBps" mount option provides an alternate method to control memory
bandwidth. Instead of specifying allowable bandwidth as a percentage of
maximum possible, the user provides a MiB/s limit value.
There is a file in each CTRL_MON group directory that shows the event
currently in use.
Allow writing that file to choose a different event.
A user can choose any of the memory bandwidth monitoring events listed in
/sys/fs/resctrl/info/L3_mon/mon_features independently for each CTRL_MON group
by writing to each of the "mba_MBps_event" files.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20241206163148.83828-8-tony.luck@intel.com
The "mba_MBps" mount option provides an alternate method to control memory
bandwidth. Instead of specifying allowable bandwidth as a percentage of
maximum possible, the user provides a MiB/s limit value.
In preparation to allow the user to pick the memory bandwidth monitoring event
used as input to the feedback loop, provide a file in each CTRL_MON group
directory that shows the event currently in use. Note that this file is only
visible when the "mba_MBps" mount option is in use.
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20241206163148.83828-7-tony.luck@intel.com
The default input measurement to the mba_sc feedback loop for memory bandwidth
control when the user mounts with the "mba_MBps" option is the local bandwidth
event. But some systems may not support a local bandwidth event.
When local bandwidth event is not supported, check for support of total
bandwidth and use that instead.
Relax the mount option check to allow use of the "mba_MBps" option for systems
when only total bandwidth monitoring is supported. Also update the error
message.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20241206163148.83828-6-tony.luck@intel.com
Switching between local and total memory bandwidth events as the input
to the mba_sc feedback loop would be cumbersome and take effect slowly
in the current implementation as the bandwidth is only known after two
consecutive readings of the same event.
Compute the bandwidth for all supported events. This doesn't add
significant overhead and will make changing which event is used
simple.
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20241206163148.83828-5-tony.luck@intel.com
update_mba_bw() hard codes use of the memory bandwidth local event which
prevents more flexible options from being deployed.
Change this function to use the event specified in the rdtgroup that is
being processed.
Mount time checks for the "mba_MBps" option ensure that local memory
bandwidth is enabled. So drop the redundant is_mbm_local_enabled() check.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20241206163148.83828-4-tony.luck@intel.com
Resctrl uses local memory bandwidth event as input to the feedback loop when
the mba_MBps mount option is used. This means that this mount option cannot be
used on systems that only support monitoring of total bandwidth.
Prepare to allow users to choose the input event independently for each
CTRL_MON group by adding a global variable "mba_mbps_default_event" used to
set the default event for each CTRL_MON group, and a new field
"mba_mbps_event" in struct rdtgroup to track which event is used for each
CTRL_MON group.
Notes:
1) Both of these are only used when the user mounts the filesystem with the
"mba_MBps" option.
2) Only check for support of local bandwidth event when initializing
mba_mbps_default_event. Support for total bandwidth event can be added
after other routines in resctrl have been updated to handle total bandwidth
event.
[ bp: Move mba_mbps_default_event extern into the arch header. ]
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20241206163148.83828-3-tony.luck@intel.com
thread_throttle_mode_init() and mbm_config_rftype_init() both initialize
fflags for resctrl files.
Adding new files will involve adding another function to initialize
the fflags. This can be simplified by adding a new function
resctrl_file_fflags_init() and passing the file name and flags
to be initialized.
Consolidate fflags initialization into resctrl_file_fflags_init() and
remove thread_throttle_mode_init() and mbm_config_rftype_init().
[ Tony: Drop __init attribute so resctrl_file_fflags_init() can be used at
run time. ]
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/r/20241206163148.83828-2-tony.luck@intel.com
Use the proper API instead of open coding it.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/r/20240807160228.26206-3-frederic@kernel.org
The pv_ops::cpu.wbinvd paravirt callback is a leftover of lguest times.
Today it is no longer needed, as all users use the native WBINVD
implementation.
Remove the callback and rename native_wbinvd() to wbinvd().
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20241203071550.26487-1-jgross@suse.com
Support Sub-NUMA cluster mode with 6 nodes per L3 cache (SNC6) on some
Intel platforms.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/r/20241031220213.17991-1-tony.luck@intel.com
'mon_info' is already zeroed in the list_for_each_entry() loop below. There
is no need to explicitly initialize it here. It just wastes some space and
cycles.
Remove this un-needed code.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
74967 5103 1880 81950 1401e arch/x86/kernel/cpu/resctrl/rdtgroup.o
After:
=====
text data bss dec hex filename
74903 5103 1880 81886 13fde arch/x86/kernel/cpu/resctrl/rdtgroup.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/r/b2ebc809c8b6c6440d17b12ccf7c2d29aaafd488.1720868538.git.christophe.jaillet@wanadoo.fr
After a recent LLVM change [1] that deduces __cold on functions that only call
cold code (such as __init functions), there is a section mismatch warning from
__get_mem_config_intel(), which got moved to .text.unlikely. as a result of
that optimization:
WARNING: modpost: vmlinux: section mismatch in reference: \
__get_mem_config_intel+0x77 (section: .text.unlikely.) -> thread_throttle_mode_init (section: .init.text)
Mark __get_mem_config_intel() as __init as well since it is only called
from __init code, which clears up the warning.
While __rdt_get_mem_config_amd() does not exhibit a warning because it
does not call any __init code, it is a similar function that is only
called from __init code like __get_mem_config_intel(), so mark it __init
as well to keep the code symmetrical.
CONFIG_SECTION_MISMATCH_WARN_ONLY=n would turn this into a fatal error.
Fixes: 05b93417ce ("x86/intel_rdt/mba: Add primary support for Memory Bandwidth Allocation (MBA)")
Fixes: 4d05bf71f1 ("x86/resctrl: Introduce AMD QOS feature")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Cc: <stable@kernel.org>
Link: 6b11573b8c [1]
Link: https://lore.kernel.org/r/20240917-x86-restctrl-get_mem_config_intel-init-v3-1-10d521256284@kernel.org
The resctrl schemata file supports specifying memory bandwidth associated with
the Memory Bandwidth Allocation (MBA) feature via a percentage (this is the
default) or bandwidth in MiBps (when resctrl is mounted with the "mba_MBps"
option).
The allowed range for the bandwidth percentage is from
/sys/fs/resctrl/info/MB/min_bandwidth to 100, using a granularity of
/sys/fs/resctrl/info/MB/bandwidth_gran. The supported range for the MiBps
bandwidth is 0 to U32_MAX.
There are two issues with parsing of MiBps memory bandwidth:
* The user provided MiBps is mistakenly rounded up to the granularity
that is unique to percentage input.
* The user provided MiBps is parsed using unsigned long (thus accepting
values up to ULONG_MAX), and then assigned to u32 that could result in
overflow.
Do not round up the MiBps value and parse user provided bandwidth as the u32
it is intended to be. Use the appropriate kstrtou32() that can detect out of
range values.
Fixes: 8205a078ba ("x86/intel_rdt/mba_sc: Add schemata support")
Fixes: 6ce1560d35 ("x86/resctrl: Switch over to the resctrl mbps_val list")
Co-developed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Martin Kletzander <nert.pinx@gmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
no_llseek had been defined to NULL two years ago, in commit 868941b144
("fs: remove no_llseek")
To quote that commit,
At -rc1 we'll need do a mechanical removal of no_llseek -
git grep -l -w no_llseek | grep -v porting.rst | while read i; do
sed -i '/\<no_llseek\>/d' $i
done
would do it.
Unfortunately, that hadn't been done. Linus, could you do that now, so
that we could finally put that thing to rest? All instances are of the
form
.llseek = no_llseek,
so it's obviously safe.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When using resctrl on systems with Sub-NUMA Clustering enabled, monitoring
groups may be allocated RMID values which would overrun the
arch_mbm_{local,total} arrays.
This is due to inconsistencies in whether the SNC-adjusted num_rmid value or
the unadjusted value in resctrl_arch_system_num_rmid_idx() is used. The
num_rmid value for the L3 resource is currently:
resctrl_arch_system_num_rmid_idx() / snc_nodes_per_l3_cache
As a simple fix, make resctrl_arch_system_num_rmid_idx() return the
SNC-adjusted, L3 num_rmid value on x86.
Fixes: e13db55b5a ("x86/resctrl: Introduce snc_nodes_per_l3_cache")
Signed-off-by: Peter Newman <peternewman@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/r/20240822190212.1848788-1-peternewman@google.com
teaching resctrl to handle scopes due to the clustering which
partitions the L3 cache into sets. Modify and extend the subsystem to
handle such scopes properly
-----BEGIN PGP SIGNATURE-----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=LITm
-----END PGP SIGNATURE-----
Merge tag 'x86_cache_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 resource control updates from Borislav Petkov:
- Enable Sub-NUMA clustering to work with resource control on Intel by
teaching resctrl to handle scopes due to the clustering which
partitions the L3 cache into sets. Modify and extend the subsystem to
handle such scopes properly
* tag 'x86_cache_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/resctrl: Update documentation with Sub-NUMA cluster changes
x86/resctrl: Detect Sub-NUMA Cluster (SNC) mode
x86/resctrl: Enable shared RMID mode on Sub-NUMA Cluster (SNC) systems
x86/resctrl: Make __mon_event_count() handle sum domains
x86/resctrl: Fill out rmid_read structure for smp_call*() to read a counter
x86/resctrl: Handle removing directories in Sub-NUMA Cluster (SNC) mode
x86/resctrl: Create Sub-NUMA Cluster (SNC) monitor files
x86/resctrl: Allocate a new field in union mon_data_bits
x86/resctrl: Refactor mkdir_mondata_subdir() with a helper function
x86/resctrl: Initialize on-stack struct rmid_read instances
x86/resctrl: Add a new field to struct rmid_read for summation of domains
x86/resctrl: Prepare for new Sub-NUMA Cluster (SNC) monitor files
x86/resctrl: Block use of mba_MBps mount option on Sub-NUMA Cluster (SNC) systems
x86/resctrl: Introduce snc_nodes_per_l3_cache
x86/resctrl: Add node-scope to the options for feature scope
x86/resctrl: Split the rdt_domain and rdt_hw_domain structures
x86/resctrl: Prepare for different scope for control/monitor operations
x86/resctrl: Prepare to split rdt_domain structure
x86/resctrl: Prepare for new domain scope
conflicts:
- Carve out CPU hotplug function declarations into a separate header
with the goal to be able to use the lockdep assertions in a more
flexible manner
- As a result, refactor cacheinfo code after carving out a function
to return the cache ID associated with a given cache level
- Cleanups
- Add support to be able to kexec TDX guests. For that
- Expand ACPI MADT CPU offlining support
- Add machinery to prepare CoCo guests memory before kexec-ing into a new
kernel
- Cleanup, readjust and massage related code
-----BEGIN PGP SIGNATURE-----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=k+T+
-----END PGP SIGNATURE-----
Merge tag 'x86_cc_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 confidential computing updates from Borislav Petkov:
"Unrelated x86/cc changes queued here to avoid ugly cross-merges and
conflicts:
- Carve out CPU hotplug function declarations into a separate header
with the goal to be able to use the lockdep assertions in a more
flexible manner
- As a result, refactor cacheinfo code after carving out a function
to return the cache ID associated with a given cache level
- Cleanups
Add support to be able to kexec TDX guests:
- Expand ACPI MADT CPU offlining support
- Add machinery to prepare CoCo guests memory before kexec-ing into a
new kernel
- Cleanup, readjust and massage related code"
* tag 'x86_cc_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
ACPI: tables: Print MULTIPROC_WAKEUP when MADT is parsed
x86/acpi: Add support for CPU offlining for ACPI MADT wakeup method
x86/mm: Introduce kernel_ident_mapping_free()
x86/smp: Add smp_ops.stop_this_cpu() callback
x86/acpi: Do not attempt to bring up secondary CPUs in the kexec case
x86/acpi: Rename fields in the acpi_madt_multiproc_wakeup structure
x86/mm: Do not zap page table entries mapping unaccepted memory table during kdump
x86/mm: Make e820__end_ram_pfn() cover E820_TYPE_ACPI ranges
x86/tdx: Convert shared memory back to private on kexec
x86/mm: Add callbacks to prepare encrypted memory for kexec
x86/tdx: Account shared memory
x86/mm: Return correct level from lookup_address() if pte is none
x86/mm: Make x86_platform.guest.enc_status_change_*() return an error
x86/kexec: Keep CR4.MCE set during kexec for TDX guest
x86/relocate_kernel: Use named labels for less confusion
cpu/hotplug, x86/acpi: Disable CPU offlining for ACPI MADT wakeup
cpu/hotplug: Add support for declaring CPU offlining not supported
x86/apic: Mark acpi_mp_wake_* variables as __ro_after_init
x86/acpi: Extract ACPI MADT wakeup code into a separate file
x86/kexec: Remove spurious unconditional JMP from from identity_mapped()
...
There isn't a simple hardware bit that indicates whether a CPU is running in
Sub-NUMA Cluster (SNC) mode. Infer the state by comparing the number of CPUs
sharing the L3 cache with CPU0 to the number of CPUs in the same NUMA node as
CPU0.
Add the missing definition of pr_fmt() to monitor.c. This wasn't noticed
before as there are only "can't happen" console messages from this file.
[ bp: Massage commit message. ]
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20240628215619.76401-19-tony.luck@intel.com
Hardware has two RMID configuration options for SNC systems. The default
mode divides RMID counters between SNC nodes. E.g. with 200 RMIDs and
two SNC nodes per L3 cache RMIDs 0..99 are used on node 0, and 100..199
on node 1. This isn't compatible with Linux resctrl usage. On this
example system a process using RMID 5 would only update monitor counters
while running on SNC node 0.
The other mode is "RMID Sharing Mode". This is enabled by clearing bit
0 of the RMID_SNC_CONFIG (0xCA0) model specific register. In this mode
the number of logical RMIDs is the number of physical RMIDs (from CPUID
leaf 0xF) divided by the number of SNC nodes per L3 cache instance. A
process can use the same RMID across different SNC nodes.
See the "Intel Resource Director Technology Architecture Specification"
for additional details.
When SNC is enabled, update the MSR when a monitor domain is marked
online. Technically this is overkill. It only needs to be done once
per L3 cache instance rather than per SNC domain. But there is no harm
in doing it more than once, and this is not in a critical path.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/r/20240702173820.90368-3-tony.luck@intel.com
Legacy resctrl monitor files must provide the sum of event values across
all Sub-NUMA Cluster (SNC) domains that share an L3 cache instance.
There are now two cases:
1) A specific domain is provided in struct rmid_read
This is either a non-SNC system, or the request is to read data
from just one SNC node.
2) Domain pointer is NULL. In this case the cacheinfo field in struct
rmid_read indicates that all SNC nodes that share that L3 cache
instance should have the event read and return the sum of all
values.
Update the CPU sanity check. The existing check that an event is read
from a CPU in the requested domain still applies when reading a single
domain. But when summing across domains a more relaxed check that the
current CPU is in the scope of the L3 cache instance is appropriate
since the MSRs to read events are scoped at L3 cache level.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20240628215619.76401-17-tony.luck@intel.com
mon_event_read() fills out most fields of the struct rmid_read that is passed
via an smp_call*() function to a CPU that is part of the correct domain to
read the monitor counters.
With Sub-NUMA Cluster (SNC) mode there are now two cases to handle:
1) Reading a file that returns a value for a single domain.
+ Choose the CPU to execute from the domain cpu_mask
2) Reading a file that must sum across domains sharing an L3 cache
instance.
+ Indicate to called code that a sum is needed by passing a NULL
rdt_mon_domain pointer.
+ Choose the CPU from the L3 shared_cpu_map.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20240628215619.76401-16-tony.luck@intel.com
In SNC mode, there are multiple subdirectories in each L3 level monitor
directory (one for each SNC node). If all the CPUs in an SNC node are taken
offline, just remove the SNC directory for that node. In non-SNC mode, or when
the last SNC node directory is removed, remove the L3 monitor directory.
Add a helper function to avoid duplicated code.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/r/20240702173820.90368-2-tony.luck@intel.com
When SNC mode is enabled, create subdirectories and files to monitor at the SNC
node granularity. Legacy behavior is preserved by tagging the monitor files at
the L3 granularity with the "sum" attribute. When the user reads these files
the kernel will read monitor data from all SNC nodes that share the same L3
cache instance and return the aggregated value to the user.
Note that the "domid" field for files that must sum across SNC domains has the
L3 cache instance id, while non-summing files use the domain id.
The "sum" files do not need to make a call to mon_event_read() to initialize
the MBM counters. This will be handled by initializing the individual SNC nodes
that share the L3.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20240628215619.76401-14-tony.luck@intel.com
When Sub-NUMA Cluster (SNC) mode is enabled, the legacy monitor reporting files
must report the sum of the data from all of the SNC nodes that share the L3
cache that is referenced by the monitor file.
Resctrl squeezes all the attributes of these files into 32 bits so they can be
stored in the "priv" field of struct kernfs_node.
Currently, only three monitor events are defined by enum resctrl_event_id so
reducing it from 8 bits to 7 bits still provides more than enough space to
represent all the known event types.
But note that this choice was arbitrary. The "rid" field is also far wider
than needed for the current number of resource id types. This structure is
purely internal to resctrl, no ABI issues with modifying it. Subsequent changes
may rearrange the allocation of bits between each of the fields as needed.
Give the bit to a new "sum" field that indicates that reading this file must
sum across SNC nodes. This bit also indicates that the domid field is the id of
an L3 cache (instead of a domain id) to find which domains must be summed.
Fix up other issues in the kerneldoc description for mon_data_bits.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20240628215619.76401-13-tony.luck@intel.com
In Sub-NUMA Cluster (SNC) mode Linux must create the monitor
files in the original "mon_L3_XX" directories and also in each
of the "mon_sub_L3_YY" directories.
Refactor mkdir_mondata_subdir() to move the creation of monitoring files
into a helper function to avoid the need to duplicate code later.
No functional change.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20240628215619.76401-12-tony.luck@intel.com
New semantics rely on some struct rmid_read members having NULL values to
distinguish between the SNC and non-SNC scenarios. resctrl can thus no longer
rely on this struct not being initialized properly.
Initialize all on-stack declarations of struct rmid_read:
rdtgroup_mondata_show()
mbm_update()
mkdir_mondata_subdir()
to ensure that garbage values from the stack are not passed down to other
functions.
[ bp: Massage commit message. ]
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20240628215619.76401-11-tony.luck@intel.com
When a user reads a monitor file rdtgroup_mondata_show() calls mon_event_read()
to package up all the required details into an rmid_read structure which is
passed across the smp_call*() infrastructure to code that will read data from
hardware and return the value (or error status) in the rmid_read structure.
Sub-NUMA Cluster (SNC) mode adds files with new semantics. These require the
smp_call-ed code to sum event data from all domains that share an L3 cache.
Add a pointer to the L3 "cacheinfo" structure to struct rmid_read for the data
collection routines to use to pick the domains to be summed.
[ Reinette: the rmid_read structure has become complex enough so document each
of its fields and provide the kerneldoc documentation for struct rmid_read. ]
Co-developed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20240628215619.76401-10-tony.luck@intel.com
When SNC is enabled, monitoring data is collected at the SNC node granularity,
but must be reported at L3-cache granularity for backwards compatibility in
addition to reporting at the node level.
Add a "ci" field to the rdt_mon_domain structure to save the cache information
about the enclosing L3 cache for the domain. This provides:
1) The cache id which is needed to compose the name of the legacy monitoring
directory, and to determine which domains should be summed to provide
L3-scoped data.
2) The shared_cpu_map which is needed to determine which CPUs can be used to
read the RMID counters with the MSR interface.
This is the first step to an eventual goal of monitor reporting files like this
(for a system with two SNC nodes per L3):
$ cd /sys/fs/resctrl/mon_data
$ tree mon_L3_00
mon_L3_00 <- 00 here is L3 cache id
├── llc_occupancy \ These files provide legacy support
├── mbm_local_bytes > for non-SNC aware monitor apps
├── mbm_total_bytes / that expect data at L3 cache level
├── mon_sub_L3_00 <- 00 here is SNC node id
│ ├── llc_occupancy \ These files are finer grained
│ ├── mbm_local_bytes > data from each SNC node
│ └── mbm_total_bytes /
└── mon_sub_L3_01
├── llc_occupancy \
├── mbm_local_bytes > As above, but for node 1.
└── mbm_total_bytes /
[ bp: Massage commit message. ]
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20240628215619.76401-9-tony.luck@intel.com
When SNC is enabled there is a mismatch between the MBA control function
which operates at L3 cache scope and the MBM monitor functions which
measure memory bandwidth on each SNC node.
Block use of the mba_MBps when scopes for MBA/MBM do not match.
Improve user diagnostics by adding invalfc() message when mba_MBps
is not supported.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20240628215619.76401-8-tony.luck@intel.com
Intel Sub-NUMA Cluster (SNC) is a feature that subdivides the CPU cores
and memory controllers on a socket into two or more groups. These are
presented to the operating system as NUMA nodes.
This may enable some workloads to have slightly lower latency to memory
as the memory controller(s) in an SNC node are electrically closer to the
CPU cores on that SNC node. This cost may be offset by lower bandwidth
since the memory accesses for each core can only be interleaved between
the memory controllers on the same SNC node.
Resctrl monitoring on an Intel system depends upon attaching RMIDs to tasks
to track L3 cache occupancy and memory bandwidth. There is an MSR that
controls how the RMIDs are shared between SNC nodes.
The default mode divides them numerically. E.g. when there are two SNC
nodes on a socket the lower number half of the RMIDs are given to the
first node, the remainder to the second node. This would be difficult
to use with the Linux resctrl interface as specific RMID values assigned
to resctrl groups are not visible to users.
RMID sharing mode divides the physical RMIDs evenly between SNC nodes
but uses a logical RMID in the IA32_PQR_ASSOC MSR. For example a system
with 200 physical RMIDs (as enumerated by CPUID leaf 0xF) that has two
SNC nodes per L3 cache instance would have 100 logical RMIDs available
for Linux to use. A task running on SNC node 0 with RMID 5 would
accumulate LLC occupancy and MBM bandwidth data in physical RMID 5.
Another task using RMID 5, but running on SNC node 1 would accumulate
data in physical RMID 105.
Even with this renumbering SNC mode requires several changes in resctrl
behavior for correct operation.
Add a static global to arch/x86/kernel/cpu/resctrl/monitor.c to indicate
how many SNC domains share an L3 cache instance. Initialize this to
"1". Runtime detection of SNC mode will adjust this value.
Update all places to take appropriate action when SNC mode is enabled:
1) The number of logical RMIDs per L3 cache available for use is the
number of physical RMIDs divided by the number of SNC nodes.
2) Likewise the "mon_scale" value must be divided by the number of SNC
nodes.
3) Add a function to convert from logical RMID values (assigned to
tasks and loaded into the IA32_PQR_ASSOC MSR on context switch)
to physical RMID values to load into IA32_QM_EVTSEL MSR when
reading counters on each SNC node.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20240628215619.76401-7-tony.luck@intel.com
Currently supported resctrl features are all domain scoped the same as the
scope of the L2 or L3 caches.
Add RESCTRL_L3_NODE as a new option for features that are scoped at the
same granularity as NUMA nodes. This is needed for Intel's Sub-NUMA
Cluster (SNC) feature where monitoring features are divided between
nodes that share an L3 cache.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20240628215619.76401-6-tony.luck@intel.com
The same rdt_domain structure is used for both control and monitor
functions. But this results in wasted memory as some of the fields are
only used by control functions, while most are only used for monitor
functions.
Split into separate rdt_ctrl_domain and rdt_mon_domain structures with
just the fields required for control and monitoring respectively.
Similar split of the rdt_hw_domain structure into rdt_hw_ctrl_domain
and rdt_hw_mon_domain.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20240628215619.76401-5-tony.luck@intel.com
Resctrl assumes that control and monitor operations on a resource are
performed at the same scope.
Prepare for systems that use different scope (specifically Intel needs
to split the RDT_RESOURCE_L3 resource to use L3 scope for cache control
and NODE scope for cache occupancy and memory bandwidth monitoring).
Create separate domain lists for control and monitor operations.
Note that errors during initialization of either control or monitor
functions on a domain would previously result in that domain being
excluded from both control and monitor operations. Now the domains are
allocated independently it is no longer required to disable both control
and monitor operations if either fail.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20240628215619.76401-4-tony.luck@intel.com
The rdt_domain structure is used for both control and monitor features.
It is about to be split into separate structures for these two usages
because the scope for control and monitoring features for a resource
will be different for future resources.
To allow for common code that scans a list of domains looking for a
specific domain id, move all the common fields ("list", "id", "cpu_mask")
into their own structure within the rdt_domain structure.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20240628215619.76401-3-tony.luck@intel.com
Resctrl resources operate on subsets of CPUs in the system with the
defining attribute of each subset being an instance of a particular
level of cache. E.g. all CPUs sharing an L3 cache would be part of the
same domain.
In preparation for features that are scoped at the NUMA node level,
change the code from explicit references to "cache_level" to a more
generic scope. At this point the only options for this scope are groups
of CPUs that share an L2 cache or L3 cache.
Clean up the error handling when looking up domains. Report invalid ids
before calling rdt_find_domain() in preparation for better messages when
scope can be other than cache scope. This means that rdt_find_domain()
will never return an error. So remove checks for error from the call sites.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20240628215619.76401-2-tony.luck@intel.com
Commit
6791e0ea30 ("x86/resctrl: Access per-rmid structures by index")
adds logic to map individual monitoring groups into a global index space used
for tracking allocated RMIDs.
Attempts to free the default RMID are ignored in free_rmid(), and this works
fine on x86.
With arm64 MPAM, there is a latent bug here however: on platforms with no
monitors exposed through resctrl, each control group still gets a different
monitoring group ID as seen by the hardware, since the CLOSID always forms part
of the monitoring group ID.
This means that when removing a control group, the code may try to free this
group's default monitoring group RMID for real. If there are no monitors
however, the RMID tracking table rmid_ptrs[] would be a waste of memory and is
never allocated, leading to a splat when free_rmid() tries to dereference the
table.
One option would be to treat RMID 0 as special for every CLOSID, but this would
be ugly since bookkeeping still needs to be done for these monitoring group IDs
when there are monitors present in the hardware.
Instead, add a gating check of resctrl_arch_mon_capable() in free_rmid(), and
just do nothing if the hardware doesn't have monitors.
This fix mirrors the gating checks already present in
mkdir_rdt_prepare_rmid_alloc() and elsewhere.
No functional change on x86.
[ bp: Massage commit message. ]
Fixes: 6791e0ea30 ("x86/resctrl: Access per-rmid structures by index")
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/r/20240618140152.83154-1-Dave.Martin@arm.com
pseudo_lock_region_init() and rdtgroup_cbm_to_size() open code a search for
details of a particular cache level.
Replace with get_cpu_cacheinfo_level().
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/r/20240610003927.341707-5-tony.luck@intel.com
goal of freeing them sooner rather than later
- Other code improvements and cleanups
-----BEGIN PGP SIGNATURE-----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=8EKr
-----END PGP SIGNATURE-----
Merge tag 'x86_cache_for_v6.10_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 resource control updates from Borislav Petkov:
- Add a tracepoint to read out LLC occupancy of resource monitor IDs
with the goal of freeing them sooner rather than later
- Other code improvements and cleanups
* tag 'x86_cache_for_v6.10_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/resctrl: Add tracepoint for llc_occupancy tracking
x86/resctrl: Rename pseudo_lock_event.h to trace.h
x86/resctrl: Simplify call convention for MSR update functions
x86/resctrl: Pass domain to target CPU
New CPU #defines encode vendor and family as well as model.
[ bp: Squash two resctrl patches into one. ]
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/all/20240424181514.41848-1-tony.luck%40intel.com
In our production environment, after removing monitor groups, those
unused RMIDs get stuck in the limbo list forever because their
llc_occupancy is always larger than the threshold. But the unused RMIDs
can be successfully freed by turning up the threshold.
In order to know how much the threshold should be, perf can be used to
acquire the llc_occupancy of RMIDs in each rdt domain.
Instead of using perf tool to track llc_occupancy and filter the log
manually, it is more convenient for users to use tracepoint to do this
work. So add a new tracepoint that shows the llc_occupancy of busy RMIDs
when scanning the limbo list.
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Suggested-by: James Morse <james.morse@arm.com>
Signed-off-by: Haifeng Xu <haifeng.xu@shopee.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: James Morse <james.morse@arm.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/r/20240408092303.26413-3-haifeng.xu@shopee.com
Now only the pseudo-locking part uses tracepoints to do event tracking,
but other parts of resctrl may need new tracepoints. It is unnecessary
to create separate header files and define CREATE_TRACE_POINTS in
different c files which fragments the resctrl tracing.
Therefore, give the resctrl tracepoint header file a generic name to
support its use for tracepoints that are not specific to pseudo-locking.
No functional change.
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Haifeng Xu <haifeng.xu@shopee.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/r/20240408092303.26413-2-haifeng.xu@shopee.com
The per-resource MSR update functions cat_wrmsr(), mba_wrmsr_intel(),
and mba_wrmsr_amd() all take three arguments:
(struct rdt_domain *d, struct msr_param *m, struct rdt_resource *r)
struct msr_param contains pointers to both struct rdt_resource and struct
rdt_domain, thus only struct msr_param is necessary.
Pass struct msr_param as a single parameter. Clean up formatting and
fix some fir tree declaration ordering.
No functional change.
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Link: https://lore.kernel.org/r/20240308213846.77075-3-tony.luck@intel.com
reset_all_ctrls() and resctrl_arch_update_domains() use on_each_cpu_mask()
to call rdt_ctrl_update() on potentially one CPU from each domain.
But this means rdt_ctrl_update() needs to figure out which domain to
apply changes to. Doing so requires a search of all domains in a resource,
which can only be done safely if cpus_lock is held. Both callers do hold
this lock, but there isn't a way for a function called on another CPU
via IPI to verify this.
Commit
c0d848fcb0 ("x86/resctrl: Remove lockdep annotation that triggers
false positive")
removed the incorrect assertions.
Add the target domain to the msr_param structure and call
rdt_ctrl_update() for each domain separately using
smp_call_function_single(). This means that rdt_ctrl_update() doesn't
need to search for the domain and get_domain_from_cpu() can safely
assert that the cpus_lock is held since the remaining callers do not use
IPI.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: James Morse <james.morse@arm.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Link: https://lore.kernel.org/r/20240308213846.77075-2-tony.luck@intel.com
Tony encountered this OOPS when the last CPU of a domain goes
offline while running a kernel built with CONFIG_NO_HZ_FULL:
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
...
RIP: 0010:__find_nth_andnot_bit+0x66/0x110
...
Call Trace:
<TASK>
? __die()
? page_fault_oops()
? exc_page_fault()
? asm_exc_page_fault()
cpumask_any_housekeeping()
mbm_setup_overflow_handler()
resctrl_offline_cpu()
resctrl_arch_offline_cpu()
cpuhp_invoke_callback()
cpuhp_thread_fun()
smpboot_thread_fn()
kthread()
ret_from_fork()
ret_from_fork_asm()
</TASK>
The NULL pointer dereference is encountered while searching for another
online CPU in the domain (of which there are none) that can be used to
run the MBM overflow handler.
Because the kernel is configured with CONFIG_NO_HZ_FULL the search for
another CPU (in its effort to prefer those CPUs that aren't marked
nohz_full) consults the mask representing the nohz_full CPUs,
tick_nohz_full_mask. On a kernel with CONFIG_CPUMASK_OFFSTACK=y
tick_nohz_full_mask is not allocated unless the kernel is booted with
the "nohz_full=" parameter and because of that any access to
tick_nohz_full_mask needs to be guarded with tick_nohz_full_enabled().
Replace the IS_ENABLED(CONFIG_NO_HZ_FULL) with tick_nohz_full_enabled().
The latter ensures tick_nohz_full_mask can be accessed safely and can be
used whether kernel is built with CONFIG_NO_HZ_FULL enabled or not.
[ Use Ingo's suggestion that combines the two NO_HZ checks into one. ]
Fixes: a4846aaf39 ("x86/resctrl: Add cpumask_any_housekeeping() for limbo/overflow")
Reported-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/ff8dfc8d3dcb04b236d523d1e0de13d2ef585223.1711993956.git.reinette.chatre@intel.com
Closes: https://lore.kernel.org/lkml/ZgIFT5gZgIQ9A9G7@agluck-desk3/
get_domain_from_cpu() walks a list of domains to find the one that
contains the specified CPU. This needs to be protected against races
with CPU hotplug when the list is modified. It has recently gained
a lockdep annotation to check this.
The lockdep annotation causes false positives when called via IPI as the
lock is held, but by another process. Remove it.
[ bp: Refresh it ontop of x86/cache. ]
Fixes: fb700810d3 ("x86/resctrl: Separate arch and fs resctrl locks")
Reported-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/all/ZdUSwOM9UUNpw84Y@agluck-desk3
resctrl has one mutex that is taken by the architecture-specific code, and the
filesystem parts. The two interact via cpuhp, where the architecture code
updates the domain list. Filesystem handlers that walk the domains list should
not run concurrently with the cpuhp callback modifying the list.
Exposing a lock from the filesystem code means the interface is not cleanly
defined, and creates the possibility of cross-architecture lock ordering
headaches. The interaction only exists so that certain filesystem paths are
serialised against CPU hotplug. The CPU hotplug code already has a mechanism to
do this using cpus_read_lock().
MPAM's monitors have an overflow interrupt, so it needs to be possible to walk
the domains list in irq context. RCU is ideal for this, but some paths need to
be able to sleep to allocate memory.
Because resctrl_{on,off}line_cpu() take the rdtgroup_mutex as part of a cpuhp
callback, cpus_read_lock() must always be taken first.
rdtgroup_schemata_write() already does this.
Most of the filesystem code's domain list walkers are currently protected by
the rdtgroup_mutex taken in rdtgroup_kn_lock_live(). The exceptions are
rdt_bit_usage_show() and the mon_config helpers which take the lock directly.
Make the domain list protected by RCU. An architecture-specific lock prevents
concurrent writers. rdt_bit_usage_show() could walk the domain list using RCU,
but to keep all the filesystem operations the same, this is changed to call
cpus_read_lock(). The mon_config helpers send multiple IPIs, take the
cpus_read_lock() in these cases.
The other filesystem list walkers need to be able to sleep. Add
cpus_read_lock() to rdtgroup_kn_lock_live() so that the cpuhp callbacks can't
be invoked when file system operations are occurring.
Add lockdep_assert_cpus_held() in the cases where the rdtgroup_kn_lock_live()
call isn't obvious.
Resctrl's domain online/offline calls now need to take the rdtgroup_mutex
themselves.
[ bp: Fold in a build fix: https://lore.kernel.org/r/87zfvwieli.ffs@tglx ]
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Link: https://lore.kernel.org/r/20240213184438.16675-25-james.morse@arm.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
When a CPU is taken offline the resctrl filesystem code needs to check if it
was the CPU nominated to perform the periodic overflow and limbo work. If so,
another CPU needs to be chosen to do this work.
This is currently done in core.c, mixed in with the code that removes the CPU
from the domain's mask, and potentially free()s the domain.
Move the migration of the overflow and limbo helpers into the filesystem code,
into resctrl_offline_cpu(). As resctrl_offline_cpu() runs before the
architecture code has removed the CPU from the domain mask, the callers need to
be told which CPU is being removed, to avoid picking it as the new CPU. This
uses the exclude_cpu feature previously added.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Link: https://lore.kernel.org/r/20240213184438.16675-24-james.morse@arm.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
The resctrl architecture specific code may need to free a domain when a CPU
goes offline, it also needs to reset the CPUs PQR_ASSOC register. Amongst
other things, the resctrl filesystem code needs to clear this CPU from the
cpu_mask of any control and monitor groups.
Currently, this is all done in core.c and called from resctrl_offline_cpu(),
making the split between architecture and filesystem code unclear.
Move the filesystem work to remove the CPU from the control and monitor groups
into a filesystem helper called resctrl_offline_cpu(), and rename the one in
core.c resctrl_arch_offline_cpu().
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Link: https://lore.kernel.org/r/20240213184438.16675-23-james.morse@arm.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
When a CPU is taken offline resctrl may need to move the overflow or limbo
handlers to run on a different CPU.
Once the offline callbacks have been split, cqm_setup_limbo_handler() will be
called while the CPU that is going offline is still present in the CPU mask.
Pass the CPU to exclude to cqm_setup_limbo_handler() and
mbm_setup_overflow_handler(). These functions can use a variant of
cpumask_any_but() when selecting the CPU. -1 is used to indicate no CPUs need
excluding.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Link: https://lore.kernel.org/r/20240213184438.16675-22-james.morse@arm.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
The resctrl architecture specific code may need to create a domain when a CPU
comes online, it also needs to reset the CPUs PQR_ASSOC register. The resctrl
filesystem code needs to update the rdtgroup_default CPU mask when CPUs are
brought online.
Currently, this is all done in one function, resctrl_online_cpu(). It will
need to be split into architecture and filesystem parts before resctrl can be
moved to /fs/.
Pull the rdtgroup_default update work out as a filesystem specific cpu_online
helper. resctrl_online_cpu() is the obvious name for this, which means the
version in core.c needs renaming.
resctrl_online_cpu() is called by the arch code once it has done the work to
add the new CPU to any domains.
In future patches, resctrl_online_cpu() will take the rdtgroup_mutex itself.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Link: https://lore.kernel.org/r/20240213184438.16675-21-james.morse@arm.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
resctrl reads rdt_alloc_capable or rdt_mon_capable to determine whether any of
the resources support the corresponding features. resctrl also uses the
static keys that affect the architecture's context-switch code to determine the
same thing.
This forces another architecture to have the same static keys.
As the static key is enabled based on the capable flag, and none of the
filesystem uses of these are in the scheduler path, move the capable flags
behind helpers, and use these in the filesystem code instead of the static key.
After this change, only the architecture code manages and uses the static keys
to ensure __resctrl_sched_in() does not need runtime checks.
This avoids multiple architectures having to define the same static keys.
Cases where the static key implicitly tested if the resctrl filesystem was
mounted all have an explicit check now.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Link: https://lore.kernel.org/r/20240213184438.16675-20-james.morse@arm.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
rdt_enable_key is switched when resctrl is mounted. It was also previously used
to prevent a second mount of the filesystem.
Any other architecture that wants to support resctrl has to provide identical
static keys.
Now that there are helpers for enabling and disabling the alloc/mon keys,
resctrl doesn't need to switch this extra key, it can be done by the arch code.
Use the static-key increment and decrement helpers, and change resctrl to
ensure the calls are balanced.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Link: https://lore.kernel.org/r/20240213184438.16675-19-james.morse@arm.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
resctrl enables three static keys depending on the features it has enabled.
Another architecture's context switch code may look different, any static keys
that control it should be buried behind helpers.
Move the alloc/mon logic into arch-specific helpers as a preparatory step for
making the rdt_enable_key's status something the arch code decides.
This means other architectures don't have to mirror the static keys.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Link: https://lore.kernel.org/r/20240213184438.16675-18-james.morse@arm.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
The rdt_enable_key is switched when resctrl is mounted, and used to prevent
a second mount of the filesystem. It also enables the architecture's context
switch code.
This requires another architecture to have the same set of static keys, as
resctrl depends on them too. The existing users of these static keys are
implicitly also checking if the filesystem is mounted.
Make the resctrl_mounted checks explicit: resctrl can keep track of whether it
has been mounted once. This doesn't need to be combined with whether the arch
code is context switching the CLOSID.
rdt_mon_enable_key is never used just to test that resctrl is mounted, but does
also have this implication. Add a resctrl_mounted to all uses of
rdt_mon_enable_key.
This will allow the static key changing to be moved behind resctrl_arch_ calls.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Link: https://lore.kernel.org/r/20240213184438.16675-17-james.morse@arm.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Depending on the number of monitors available, Arm's MPAM may need to
allocate a monitor prior to reading the counter value. Allocating a
contended resource may involve sleeping.
__check_limbo() and mon_event_count() each make multiple calls to
resctrl_arch_rmid_read(), to avoid extra work on contended systems,
the allocation should be valid for multiple invocations of
resctrl_arch_rmid_read().
The memory or hardware allocated is not specific to a domain.
Add arch hooks for this allocation, which need calling before
resctrl_arch_rmid_read(). The allocated monitor is passed to
resctrl_arch_rmid_read(), then freed again afterwards. The helper
can be called on any CPU, and can sleep.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Link: https://lore.kernel.org/r/20240213184438.16675-16-james.morse@arm.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
MPAM's cache occupancy counters can take a little while to settle once the
monitor has been configured. The maximum settling time is described to the
driver via a firmware table. The value could be large enough that it makes
sense to sleep. To avoid exposing this to resctrl, it should be hidden behind
MPAM's resctrl_arch_rmid_read().
resctrl_arch_rmid_read() may be called via IPI meaning it is unable to sleep.
In this case, it should return an error if it needs to sleep. This will only
affect MPAM platforms where the cache occupancy counter isn't available
immediately, nohz_full is in use, and there are no housekeeping CPUs in the
necessary domain.
There are three callers of resctrl_arch_rmid_read(): __mon_event_count() and
__check_limbo() are both called from a non-migrateable context.
mon_event_read() invokes __mon_event_count() using smp_call_on_cpu(), which
adds work to the target CPUs workqueue. rdtgroup_mutex() is held, meaning this
cannot race with the resctrl cpuhp callback. __check_limbo() is invoked via
schedule_delayed_work_on() also adds work to a per-cpu workqueue.
The remaining call is add_rmid_to_limbo() which is called in response to
a user-space syscall that frees an RMID. This opportunistically reads the LLC
occupancy counter on the current domain to see if the RMID is over the dirty
threshold. This has to disable preemption to avoid reading the wrong domain's
value. Disabling preemption here prevents resctrl_arch_rmid_read() from
sleeping.
add_rmid_to_limbo() walks each domain, but only reads the counter on one
domain. If the system has more than one domain, the RMID will always be added
to the limbo list. If the RMIDs usage was not over the threshold, it will be
removed from the list when __check_limbo() runs. Make this the default
behaviour. Free RMIDs are always added to the limbo list for each domain.
The user visible effect of this is that a clean RMID is not available for
re-allocation immediately after 'rmdir()' completes. This behaviour was never
portable as it never happened on a machine with multiple domains.
Removing this path allows resctrl_arch_rmid_read() to sleep if its called with
interrupts unmasked. Document this is the expected behaviour, and add
a might_sleep() annotation to catch changes that won't work on arm64.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Link: https://lore.kernel.org/r/20240213184438.16675-15-james.morse@arm.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Intel is blessed with an abundance of monitors, one per RMID, that can be
read from any CPU in the domain. MPAMs monitors reside in the MMIO MSC,
the number implemented is up to the manufacturer. This means when there are
fewer monitors than needed, they need to be allocated and freed.
MPAM's CSU monitors are used to back the 'llc_occupancy' monitor file. The
CSU counter is allowed to return 'not ready' for a small number of
micro-seconds after programming. To allow one CSU hardware monitor to be
used for multiple control or monitor groups, the CPU accessing the
monitor needs to be able to block when configuring and reading the
counter.
Worse, the domain may be broken up into slices, and the MMIO accesses
for each slice may need performing from different CPUs.
These two details mean MPAMs monitor code needs to be able to sleep, and
IPI another CPU in the domain to read from a resource that has been sliced.
mon_event_read() already invokes mon_event_count() via IPI, which means
this isn't possible. On systems using nohz-full, some CPUs need to be
interrupted to run kernel work as they otherwise stay in user-space
running realtime workloads. Interrupting these CPUs should be avoided,
and scheduling work on them may never complete.
Change mon_event_read() to pick a housekeeping CPU, (one that is not using
nohz_full) and schedule mon_event_count() and wait. If all the CPUs
in a domain are using nohz-full, then an IPI is used as the fallback.
This function is only used in response to a user-space filesystem request
(not the timing sensitive overflow code).
This allows MPAM to hide the slice behaviour from resctrl, and to keep
the monitor-allocation in monitor.c. When the IPI fallback is used on
machines where MPAM needs to make an access on multiple CPUs, the counter
read will always fail.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Peter Newman <peternewman@google.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Link: https://lore.kernel.org/r/20240213184438.16675-14-james.morse@arm.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
The limbo and overflow code picks a CPU to use from the domain's list of online
CPUs. Work is then scheduled on these CPUs to maintain the limbo list and any
counters that may overflow.
cpumask_any() may pick a CPU that is marked nohz_full, which will either
penalise the work that CPU was dedicated to, or delay the processing of limbo
list or counters that may overflow. Perhaps indefinitely. Delaying the overflow
handling will skew the bandwidth values calculated by mba_sc, which expects to
be called once a second.
Add cpumask_any_housekeeping() as a replacement for cpumask_any() that prefers
housekeeping CPUs. This helper will still return a nohz_full CPU if that is the
only option. The CPU to use is re-evaluated each time the limbo/overflow work
runs. This ensures the work will move off a nohz_full CPU once a housekeeping
CPU is available.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Link: https://lore.kernel.org/r/20240213184438.16675-13-james.morse@arm.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
When switching tasks, the CLOSID and RMID that the new task should use
are stored in struct task_struct. For x86 the CLOSID known by resctrl,
the value in task_struct, and the value written to the CPU register are
all the same thing.
MPAM's CPU interface has two different PARTIDs - one for data accesses
the other for instruction fetch. Storing resctrl's CLOSID value in
struct task_struct implies the arch code knows whether resctrl is using
CDP.
Move the matching and setting of the struct task_struct properties to
use helpers. This allows arm64 to store the hardware format of the
register, instead of having to convert it each time.
__rdtgroup_move_task()s use of READ_ONCE()/WRITE_ONCE() ensures torn
values aren't seen as another CPU may schedule the task being moved
while the value is being changed. MPAM has an additional corner-case
here as the PMG bits extend the PARTID space.
If the scheduler sees a new-CLOSID but old-RMID, the task will dirty an
RMID that the limbo code is not watching causing an inaccurate count.
x86's RMID are independent values, so the limbo code will still be
watching the old-RMID in this circumstance.
To avoid this, arm64 needs both the CLOSID/RMID WRITE_ONCE()d together.
Both values must be provided together.
Because MPAM's RMID values are not unique, the CLOSID must be provided
when matching the RMID.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Link: https://lore.kernel.org/r/20240213184438.16675-12-james.morse@arm.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
MPAM's PMG bits extend its PARTID space, meaning the same PMG value can be used
for different control groups.
This means once a CLOSID is allocated, all its monitoring ids may still be
dirty, and held in limbo.
Instead of allocating the first free CLOSID, on architectures where
CONFIG_RESCTRL_RMID_DEPENDS_ON_CLOSID is enabled, search
closid_num_dirty_rmid[] to find the cleanest CLOSID.
The CLOSID found is returned to closid_alloc() for the free list
to be updated.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Link: https://lore.kernel.org/r/20240213184438.16675-11-james.morse@arm.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
The resctrl CLOSID allocator uses a single 32bit word to track which
CLOSID are free. The setting and clearing of bits is open coded.
Convert the existing open coded bit manipulations of closid_free_map
to use __set_bit() and friends. These don't need to be atomic as this
list is protected by the mutex.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Link: https://lore.kernel.org/r/20240213184438.16675-10-james.morse@arm.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
MPAM's PMG bits extend its PARTID space, meaning the same PMG value can be
used for different control groups.
This means once a CLOSID is allocated, all its monitoring ids may still be
dirty, and held in limbo.
Keep track of the number of RMID held in limbo each CLOSID has. This will
allow a future helper to find the 'cleanest' CLOSID when allocating.
The array is only needed when CONFIG_RESCTRL_RMID_DEPENDS_ON_CLOSID is
defined. This will never be the case on x86.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Link: https://lore.kernel.org/r/20240213184438.16675-9-james.morse@arm.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
MPAMs RMID values are not unique unless the CLOSID is considered as well.
alloc_rmid() expects the RMID to be an independent number.
Pass the CLOSID in to alloc_rmid(). Use this to compare indexes when
allocating. If the CLOSID is not relevant to the index, this ends up comparing
the free RMID with itself, and the first free entry will be used. With MPAM the
CLOSID is included in the index, so this becomes a walk of the free RMID
entries, until one that matches the supplied CLOSID is found.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Link: https://lore.kernel.org/r/20240213184438.16675-8-james.morse@arm.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
x86 systems identify traffic using the CLOSID and RMID. The CLOSID is
used to lookup the control policy, the RMID is used for monitoring. For
x86 these are independent numbers.
Arm's MPAM has equivalent features PARTID and PMG, where the PARTID is
used to lookup the control policy. The PMG in contrast is a small number
of bits that are used to subdivide PARTID when monitoring. The
cache-occupancy monitors require the PARTID to be specified when
monitoring.
This means MPAM's PMG field is not unique. There are multiple PMG-0, one
per allocated CLOSID/PARTID. If PMG is treated as equivalent to RMID, it
cannot be allocated as an independent number. Bitmaps like rmid_busy_llc
need to be sized by the number of unique entries for this resource.
Treat the combined CLOSID and RMID as an index, and provide architecture
helpers to pack and unpack an index. This makes the MPAM values unique.
The domain's rmid_busy_llc and rmid_ptrs[] are then sized by index, as
are domain mbm_local[] and mbm_total[].
x86 can ignore the CLOSID field when packing and unpacking an index, and
report as many indexes as RMID.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Link: https://lore.kernel.org/r/20240213184438.16675-7-james.morse@arm.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
x86's RMID are independent of the CLOSID. An RMID can be allocated,
used and freed without considering the CLOSID.
MPAM's equivalent feature is PMG, which is not an independent number,
it extends the CLOSID/PARTID space. For MPAM, only PMG-bits worth of
'RMID' can be allocated for a single CLOSID.
i.e. if there is 1 bit of PMG space, then each CLOSID can have two
monitor groups.
To allow resctrl to disambiguate RMID values for different CLOSID,
everything in resctrl that keeps an RMID value needs to know the CLOSID
too. This will always be ignored on x86.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Xin Hao <xhao@linux.alibaba.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Link: https://lore.kernel.org/r/20240213184438.16675-6-james.morse@arm.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
RMIDs are allocated for each monitor or control group directory, because
each of these needs its own RMID. For control groups,
rdtgroup_mkdir_ctrl_mon() later goes on to allocate the CLOSID.
MPAM's equivalent of RMID is not an independent number, so can't be
allocated until the CLOSID is known. An RMID allocation for one CLOSID
may fail, whereas another may succeed depending on how many monitor
groups a control group has.
The RMID allocation needs to move to be after the CLOSID has been
allocated.
Move the RMID allocation out of mkdir_rdt_prepare() to occur in its caller,
after the mkdir_rdt_prepare() call. This allows the RMID allocator to
know the CLOSID.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Link: https://lore.kernel.org/r/20240213184438.16675-5-james.morse@arm.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
When monitoring is supported, each monitor and control group is allocated an
RMID. For control groups, rdtgroup_mkdir_ctrl_mon() later goes on to allocate
the CLOSID.
MPAM's equivalent of RMID are not an independent number, so can't be allocated
until the CLOSID is known. An RMID allocation for one CLOSID may fail, whereas
another may succeed depending on how many monitor groups a control group has.
The RMID allocation needs to move to be after the CLOSID has been allocated.
Move the RMID allocation and mondata dir creation to a helper.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Link: https://lore.kernel.org/r/20240213184438.16675-4-james.morse@arm.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
rmid_ptrs[] is allocated from dom_data_init() but never free()d.
While the exit text ends up in the linker script's DISCARD section,
the direction of travel is for resctrl to be/have loadable modules.
Add resctrl_put_mon_l3_config() to cleanup any memory allocated
by rdt_get_mon_l3_config().
There is no reason to backport this to a stable kernel.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Link: https://lore.kernel.org/r/20240213184438.16675-3-james.morse@arm.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
The kernel test robot reported the following warning after commit
54e35eb861 ("x86/resctrl: Read supported bandwidth sources from CPUID").
even though the issue is present even in the original commit
92bd5a1390 ("x86/resctrl: Add interface to write mbm_total_bytes_config")
which added this function. The reported warning is:
$ make C=1 CHECK=scripts/coccicheck arch/x86/kernel/cpu/resctrl/rdtgroup.o
...
arch/x86/kernel/cpu/resctrl/rdtgroup.c:1621:5-8: Unneeded variable: "ret". Return "0" on line 1655
Remove the local variable 'ret'.
[ bp: Massage commit message, make mbm_config_write_domain() void. ]
Fixes: 92bd5a1390 ("x86/resctrl: Add interface to write mbm_total_bytes_config")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202401241810.jbd8Ipa1-lkp@intel.com/
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/r/202401241810.jbd8Ipa1-lkp@intel.com
The mba_MBps feedback loop increases throttling when a group is using
more bandwidth than the target set by the user in the schemata file, and
decreases throttling when below target.
To avoid possibly stepping throttling up and down on every poll a flag
"delta_comp" is set whenever throttling is changed to indicate that the
actual change in bandwidth should be recorded on the next poll in
"delta_bw". Throttling is only reduced if the current bandwidth plus
delta_bw is below the user target.
This algorithm works well if the workload has steady bandwidth needs.
But it can go badly wrong if the workload moves to a different phase
just as the throttling level changed. E.g. if the workload becomes
essentially idle right as throttling level is increased, the value
calculated for delta_bw will be more or less the old bandwidth level.
If the workload then resumes, Linux may never reduce throttling because
current bandwidth plus delta_bw is above the target set by the user.
Implement a simpler heuristic by assuming that in the worst case the
currently measured bandwidth is being controlled by the current level of
throttling. Compute how much it may increase if throttling is relaxed to
the next higher level. If that is still below the user target, then it
is ok to reduce the amount of throttling.
Fixes: ba0f26d852 ("x86/intel_rdt/mba_sc: Prepare for feedback loop")
Reported-by: Xiaochen Shen <xiaochen.shen@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Xiaochen Shen <xiaochen.shen@intel.com>
Link: https://lore.kernel.org/r/20240122180807.70518-1-tony.luck@intel.com
If the BMEC (Bandwidth Monitoring Event Configuration) feature is
supported, the bandwidth events can be configured. The maximum supported
bandwidth bitmask can be read from CPUID:
CPUID_Fn80000020_ECX_x03 [Platform QoS Monitoring Bandwidth Event Configuration]
Bits Description
31:7 Reserved
6:0 Identifies the bandwidth sources that can be tracked.
While at it, move the mask checking to mon_config_write() before
iterating over all the domains. Also, print the valid bitmask when the
user tries to configure invalid event configuration value.
The CPUID details are documented in the Processor Programming Reference
(PPR) Vol 1.1 for AMD Family 19h Model 11h B1 - 55901 Rev 0.25 in the
Link tag.
Fixes: dc2a3e8579 ("x86/resctrl: Add interface to read mbm_total_bytes_config")
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206537
Link: https://lore.kernel.org/r/669896fa512c7451319fa5ca2fdb6f7e015b5635.1705359148.git.babu.moger@amd.com
The QOS Memory Bandwidth Enforcement Limit is reported by
CPUID_Fn80000020_EAX_x01 and CPUID_Fn80000020_EAX_x02:
Bits Description
31:0 BW_LEN: Size of the QOS Memory Bandwidth Enforcement Limit.
Newer processors can support higher bandwidth limit than the current
hard-coded value. Remove latter and detect using CPUID instead. Also,
update the register variables eax and edx to match the AMD CPUID
definition.
The CPUID details are documented in the Processor Programming Reference
(PPR) Vol 1.1 for AMD Family 19h Model 11h B1 - 55901 Rev 0.25 in the
Link tag below.
Fixes: 4d05bf71f1 ("x86/resctrl: Introduce AMD QOS feature")
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206537
Link: https://lore.kernel.org/r/c26a8ca79d399ed076cf8bf2e9fbc58048808289.1705359148.git.babu.moger@amd.com
In a "W=1" build gcc throws a warning:
arch/x86/kernel/cpu/resctrl/core.c: In function ‘cache_alloc_hsw_probe’:
arch/x86/kernel/cpu/resctrl/core.c:139:16: warning: variable ‘h’ set but not used
Switch from wrmsr_safe() to wrmsrl_safe(), and from rdmsr() to rdmsrl()
using a single u64 argument for the MSR value instead of the pair of u32
for the high and low halves.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Acked-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/r/ZULCd/TGJL9Dmncf@agluck-desk3
Intel's CAT implementation
- Other improvements to resctrl code: better configuration,
simplifications, debugging support, fixes
-----BEGIN PGP SIGNATURE-----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=GGQX
-----END PGP SIGNATURE-----
Merge tag 'x86_cache_for_6.7_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 resource control updates from Borislav Petkov:
- Add support for non-contiguous capacity bitmasks being added to
Intel's CAT implementation
- Other improvements to resctrl code: better configuration,
simplifications, debugging support, fixes
* tag 'x86_cache_for_6.7_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/resctrl: Display RMID of resource group
x86/resctrl: Add support for the files of MON groups only
x86/resctrl: Display CLOSID for resource group
x86/resctrl: Introduce "-o debug" mount option
x86/resctrl: Move default group file creation to mount
x86/resctrl: Unwind properly from rdt_enable_ctx()
x86/resctrl: Rename rftype flags for consistency
x86/resctrl: Simplify rftype flag definitions
x86/resctrl: Add multiple tasks to the resctrl group at once
Documentation/x86: Document resctrl's new sparse_masks
x86/resctrl: Add sparse_masks file in info
x86/resctrl: Enable non-contiguous CBMs in Intel CAT
x86/resctrl: Rename arch_has_sparse_bitmaps
x86/resctrl: Fix remaining kernel-doc warnings
In x86, hardware uses RMID to identify a monitoring group. When a user
creates a monitor group these details are not visible. These details
can help resctrl debugging.
Add RMID(mon_hw_id) to the monitor groups display in the resctrl interface.
Users can see these details when resctrl is mounted with "-o debug" option.
Add RFTYPE_MON_BASE that complements existing RFTYPE_CTRL_BASE and
represents files belonging to monitoring groups.
Other architectures do not use "RMID". Use the name mon_hw_id to refer
to "RMID" in an effort to keep the naming generic.
For example:
$cat /sys/fs/resctrl/mon_groups/mon_grp1/mon_hw_id
3
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Peter Newman <peternewman@google.com>
Reviewed-by: Tan Shaopeng <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Tan Shaopeng <tan.shaopeng@jp.fujitsu.com>
Link: https://lore.kernel.org/r/20231017002308.134480-10-babu.moger@amd.com
Files unique to monitoring groups have the RFTYPE_MON flag. When a new
monitoring group is created the resctrl files with flags RFTYPE_BASE
(files common to all resource groups) and RFTYPE_MON (files unique to
monitoring groups) are created to support interacting with the new
monitoring group.
A resource group can support both monitoring and control, also termed
a CTRL_MON resource group. CTRL_MON groups should get both monitoring
and control resctrl files but that is not the case. Only the
RFTYPE_BASE and RFTYPE_CTRL files are created for CTRL_MON groups.
Ensure that files with the RFTYPE_MON flag are created for CTRL_MON groups.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Peter Newman <peternewman@google.com>
Reviewed-by: Tan Shaopeng <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Tan Shaopeng <tan.shaopeng@jp.fujitsu.com>
Link: https://lore.kernel.org/r/20231017002308.134480-9-babu.moger@amd.com
In x86, hardware uses CLOSID to identify a control group. When a user
creates a control group this information is not visible to the user. It
can help resctrl debugging.
Add CLOSID(ctrl_hw_id) to the control groups display in the resctrl
interface. Users can see this detail when resctrl is mounted with the
"-o debug" option.
Other architectures do not use "CLOSID". Use the names ctrl_hw_id to refer
to "CLOSID" in an effort to keep the naming generic.
For example:
$cat /sys/fs/resctrl/ctrl_grp1/ctrl_hw_id
1
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Peter Newman <peternewman@google.com>
Reviewed-by: Tan Shaopeng <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Tan Shaopeng <tan.shaopeng@jp.fujitsu.com>
Link: https://lore.kernel.org/r/20231017002308.134480-8-babu.moger@amd.com
Add "-o debug" option to mount resctrl filesystem in debug mode. When
in debug mode resctrl displays files that have the new RFTYPE_DEBUG flag
to help resctrl debugging.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Peter Newman <peternewman@google.com>
Reviewed-by: Tan Shaopeng <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Tan Shaopeng <tan.shaopeng@jp.fujitsu.com>
Link: https://lore.kernel.org/r/20231017002308.134480-7-babu.moger@amd.com
The default resource group and its files are created during kernel init
time. Upcoming changes will make some resctrl files optional based on
a mount parameter. If optional files are to be added to the default
group based on the mount option, then each new file needs to be created
separately and call kernfs_activate() again.
Create all files of the default resource group during resctrl mount,
destroyed during unmount, to avoid scattering resctrl file addition
across two separate code flows.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Peter Newman <peternewman@google.com>
Reviewed-by: Tan Shaopeng <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Tan Shaopeng <tan.shaopeng@jp.fujitsu.com>
Link: https://lore.kernel.org/r/20231017002308.134480-6-babu.moger@amd.com
rdt_enable_ctx() enables the features provided during resctrl mount.
Additions to rdt_enable_ctx() are required to also modify error paths
of rdt_enable_ctx() callers to ensure correct unwinding if errors
are encountered after calling rdt_enable_ctx(). This is error prone.
Introduce rdt_disable_ctx() to refactor the error unwinding of
rdt_enable_ctx() to simplify future additions. This also simplifies
cleanup in rdt_kill_sb().
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Peter Newman <peternewman@google.com>
Reviewed-by: Tan Shaopeng <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Tan Shaopeng <tan.shaopeng@jp.fujitsu.com>
Link: https://lore.kernel.org/r/20231017002308.134480-5-babu.moger@amd.com
resctrl associates rftype flags with its files so that files can be chosen
based on the resource, whether it is info or base, and if it is control
or monitor type file. These flags use the RF_ as well as RFTYPE_ prefixes.
Change the prefix to RFTYPE_ for all these flags to be consistent.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Peter Newman <peternewman@google.com>
Reviewed-by: Tan Shaopeng <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Tan Shaopeng <tan.shaopeng@jp.fujitsu.com>
Link: https://lore.kernel.org/r/20231017002308.134480-4-babu.moger@amd.com
The rftype flags are bitmaps used for adding files under the resctrl
filesystem. Some of these bitmap defines have one extra level of
indirection which is not necessary.
Drop the RF_* defines and simplify the macros.
[ bp: Massage commit message. ]
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Peter Newman <peternewman@google.com>
Reviewed-by: Tan Shaopeng <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Tan Shaopeng <tan.shaopeng@jp.fujitsu.com>
Link: https://lore.kernel.org/r/20231017002308.134480-3-babu.moger@amd.com
The resctrl task assignment for monitor or control group needs to be
done one at a time. For example:
$mount -t resctrl resctrl /sys/fs/resctrl/
$mkdir /sys/fs/resctrl/ctrl_grp1
$echo 123 > /sys/fs/resctrl/ctrl_grp1/tasks
$echo 456 > /sys/fs/resctrl/ctrl_grp1/tasks
$echo 789 > /sys/fs/resctrl/ctrl_grp1/tasks
This is not user-friendly when dealing with hundreds of tasks.
Support multiple task assignment in one command with tasks ids separated
by commas. For example:
$echo 123,456,789 > /sys/fs/resctrl/ctrl_grp1/tasks
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Peter Newman <peternewman@google.com>
Reviewed-by: Tan Shaopeng <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Tan Shaopeng <tan.shaopeng@jp.fujitsu.com>
Link: https://lore.kernel.org/r/20231017002308.134480-2-babu.moger@amd.com
Add the interface in resctrl FS to show if sparse cache allocation
bit masks are supported on the platform. Reading the file returns
either a "1" if non-contiguous 1s are supported and "0" otherwise.
The file path is /sys/fs/resctrl/info/{resource}/sparse_masks, where
{resource} can be either "L2" or "L3".
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Peter Newman <peternewman@google.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Peter Newman <peternewman@google.com>
Link: https://lore.kernel.org/r/7300535160beba41fd8aa073749ec1ee29b4621f.1696934091.git.maciej.wieczor-retman@intel.com
The setting for non-contiguous 1s support in Intel CAT is
hardcoded to false. On these systems, writing non-contiguous
1s into the schemata file will fail before resctrl passes
the value to the hardware.
In Intel CAT CPUID.0x10.1:ECX[3] and CPUID.0x10.2:ECX[3] stopped
being reserved and now carry information about non-contiguous 1s
value support for L3 and L2 cache respectively. The CAT
capacity bitmask (CBM) supports a non-contiguous 1s value if
the bit is set.
The exception are Haswell systems where non-contiguous 1s value
support needs to stay disabled since they can't make use of CPUID
for Cache allocation.
Originally-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Peter Newman <peternewman@google.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Peter Newman <peternewman@google.com>
Link: https://lore.kernel.org/r/1849b487256fe4de40b30f88450cba3d9abc9171.1696934091.git.maciej.wieczor-retman@intel.com
