In Sub-NUMA Cluster (SNC) mode Linux must create the monitor
files in the original "mon_L3_XX" directories and also in each
of the "mon_sub_L3_YY" directories.
Refactor mkdir_mondata_subdir() to move the creation of monitoring files
into a helper function to avoid the need to duplicate code later.
No functional change.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20240628215619.76401-12-tony.luck@intel.com
New semantics rely on some struct rmid_read members having NULL values to
distinguish between the SNC and non-SNC scenarios. resctrl can thus no longer
rely on this struct not being initialized properly.
Initialize all on-stack declarations of struct rmid_read:
rdtgroup_mondata_show()
mbm_update()
mkdir_mondata_subdir()
to ensure that garbage values from the stack are not passed down to other
functions.
[ bp: Massage commit message. ]
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20240628215619.76401-11-tony.luck@intel.com
When SNC is enabled, monitoring data is collected at the SNC node granularity,
but must be reported at L3-cache granularity for backwards compatibility in
addition to reporting at the node level.
Add a "ci" field to the rdt_mon_domain structure to save the cache information
about the enclosing L3 cache for the domain. This provides:
1) The cache id which is needed to compose the name of the legacy monitoring
directory, and to determine which domains should be summed to provide
L3-scoped data.
2) The shared_cpu_map which is needed to determine which CPUs can be used to
read the RMID counters with the MSR interface.
This is the first step to an eventual goal of monitor reporting files like this
(for a system with two SNC nodes per L3):
$ cd /sys/fs/resctrl/mon_data
$ tree mon_L3_00
mon_L3_00 <- 00 here is L3 cache id
├── llc_occupancy \ These files provide legacy support
├── mbm_local_bytes > for non-SNC aware monitor apps
├── mbm_total_bytes / that expect data at L3 cache level
├── mon_sub_L3_00 <- 00 here is SNC node id
│ ├── llc_occupancy \ These files are finer grained
│ ├── mbm_local_bytes > data from each SNC node
│ └── mbm_total_bytes /
└── mon_sub_L3_01
├── llc_occupancy \
├── mbm_local_bytes > As above, but for node 1.
└── mbm_total_bytes /
[ bp: Massage commit message. ]
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20240628215619.76401-9-tony.luck@intel.com
When SNC is enabled there is a mismatch between the MBA control function
which operates at L3 cache scope and the MBM monitor functions which
measure memory bandwidth on each SNC node.
Block use of the mba_MBps when scopes for MBA/MBM do not match.
Improve user diagnostics by adding invalfc() message when mba_MBps
is not supported.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20240628215619.76401-8-tony.luck@intel.com
The same rdt_domain structure is used for both control and monitor
functions. But this results in wasted memory as some of the fields are
only used by control functions, while most are only used for monitor
functions.
Split into separate rdt_ctrl_domain and rdt_mon_domain structures with
just the fields required for control and monitoring respectively.
Similar split of the rdt_hw_domain structure into rdt_hw_ctrl_domain
and rdt_hw_mon_domain.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20240628215619.76401-5-tony.luck@intel.com
Resctrl assumes that control and monitor operations on a resource are
performed at the same scope.
Prepare for systems that use different scope (specifically Intel needs
to split the RDT_RESOURCE_L3 resource to use L3 scope for cache control
and NODE scope for cache occupancy and memory bandwidth monitoring).
Create separate domain lists for control and monitor operations.
Note that errors during initialization of either control or monitor
functions on a domain would previously result in that domain being
excluded from both control and monitor operations. Now the domains are
allocated independently it is no longer required to disable both control
and monitor operations if either fail.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20240628215619.76401-4-tony.luck@intel.com
The rdt_domain structure is used for both control and monitor features.
It is about to be split into separate structures for these two usages
because the scope for control and monitoring features for a resource
will be different for future resources.
To allow for common code that scans a list of domains looking for a
specific domain id, move all the common fields ("list", "id", "cpu_mask")
into their own structure within the rdt_domain structure.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20240628215619.76401-3-tony.luck@intel.com
Resctrl resources operate on subsets of CPUs in the system with the
defining attribute of each subset being an instance of a particular
level of cache. E.g. all CPUs sharing an L3 cache would be part of the
same domain.
In preparation for features that are scoped at the NUMA node level,
change the code from explicit references to "cache_level" to a more
generic scope. At this point the only options for this scope are groups
of CPUs that share an L2 cache or L3 cache.
Clean up the error handling when looking up domains. Report invalid ids
before calling rdt_find_domain() in preparation for better messages when
scope can be other than cache scope. This means that rdt_find_domain()
will never return an error. So remove checks for error from the call sites.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20240628215619.76401-2-tony.luck@intel.com
pseudo_lock_region_init() and rdtgroup_cbm_to_size() open code a search for
details of a particular cache level.
Replace with get_cpu_cacheinfo_level().
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/r/20240610003927.341707-5-tony.luck@intel.com
reset_all_ctrls() and resctrl_arch_update_domains() use on_each_cpu_mask()
to call rdt_ctrl_update() on potentially one CPU from each domain.
But this means rdt_ctrl_update() needs to figure out which domain to
apply changes to. Doing so requires a search of all domains in a resource,
which can only be done safely if cpus_lock is held. Both callers do hold
this lock, but there isn't a way for a function called on another CPU
via IPI to verify this.
Commit
c0d848fcb0 ("x86/resctrl: Remove lockdep annotation that triggers
false positive")
removed the incorrect assertions.
Add the target domain to the msr_param structure and call
rdt_ctrl_update() for each domain separately using
smp_call_function_single(). This means that rdt_ctrl_update() doesn't
need to search for the domain and get_domain_from_cpu() can safely
assert that the cpus_lock is held since the remaining callers do not use
IPI.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: James Morse <james.morse@arm.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Link: https://lore.kernel.org/r/20240308213846.77075-2-tony.luck@intel.com
resctrl has one mutex that is taken by the architecture-specific code, and the
filesystem parts. The two interact via cpuhp, where the architecture code
updates the domain list. Filesystem handlers that walk the domains list should
not run concurrently with the cpuhp callback modifying the list.
Exposing a lock from the filesystem code means the interface is not cleanly
defined, and creates the possibility of cross-architecture lock ordering
headaches. The interaction only exists so that certain filesystem paths are
serialised against CPU hotplug. The CPU hotplug code already has a mechanism to
do this using cpus_read_lock().
MPAM's monitors have an overflow interrupt, so it needs to be possible to walk
the domains list in irq context. RCU is ideal for this, but some paths need to
be able to sleep to allocate memory.
Because resctrl_{on,off}line_cpu() take the rdtgroup_mutex as part of a cpuhp
callback, cpus_read_lock() must always be taken first.
rdtgroup_schemata_write() already does this.
Most of the filesystem code's domain list walkers are currently protected by
the rdtgroup_mutex taken in rdtgroup_kn_lock_live(). The exceptions are
rdt_bit_usage_show() and the mon_config helpers which take the lock directly.
Make the domain list protected by RCU. An architecture-specific lock prevents
concurrent writers. rdt_bit_usage_show() could walk the domain list using RCU,
but to keep all the filesystem operations the same, this is changed to call
cpus_read_lock(). The mon_config helpers send multiple IPIs, take the
cpus_read_lock() in these cases.
The other filesystem list walkers need to be able to sleep. Add
cpus_read_lock() to rdtgroup_kn_lock_live() so that the cpuhp callbacks can't
be invoked when file system operations are occurring.
Add lockdep_assert_cpus_held() in the cases where the rdtgroup_kn_lock_live()
call isn't obvious.
Resctrl's domain online/offline calls now need to take the rdtgroup_mutex
themselves.
[ bp: Fold in a build fix: https://lore.kernel.org/r/87zfvwieli.ffs@tglx ]
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Link: https://lore.kernel.org/r/20240213184438.16675-25-james.morse@arm.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
When a CPU is taken offline the resctrl filesystem code needs to check if it
was the CPU nominated to perform the periodic overflow and limbo work. If so,
another CPU needs to be chosen to do this work.
This is currently done in core.c, mixed in with the code that removes the CPU
from the domain's mask, and potentially free()s the domain.
Move the migration of the overflow and limbo helpers into the filesystem code,
into resctrl_offline_cpu(). As resctrl_offline_cpu() runs before the
architecture code has removed the CPU from the domain mask, the callers need to
be told which CPU is being removed, to avoid picking it as the new CPU. This
uses the exclude_cpu feature previously added.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Link: https://lore.kernel.org/r/20240213184438.16675-24-james.morse@arm.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
The resctrl architecture specific code may need to free a domain when a CPU
goes offline, it also needs to reset the CPUs PQR_ASSOC register. Amongst
other things, the resctrl filesystem code needs to clear this CPU from the
cpu_mask of any control and monitor groups.
Currently, this is all done in core.c and called from resctrl_offline_cpu(),
making the split between architecture and filesystem code unclear.
Move the filesystem work to remove the CPU from the control and monitor groups
into a filesystem helper called resctrl_offline_cpu(), and rename the one in
core.c resctrl_arch_offline_cpu().
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Link: https://lore.kernel.org/r/20240213184438.16675-23-james.morse@arm.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
When a CPU is taken offline resctrl may need to move the overflow or limbo
handlers to run on a different CPU.
Once the offline callbacks have been split, cqm_setup_limbo_handler() will be
called while the CPU that is going offline is still present in the CPU mask.
Pass the CPU to exclude to cqm_setup_limbo_handler() and
mbm_setup_overflow_handler(). These functions can use a variant of
cpumask_any_but() when selecting the CPU. -1 is used to indicate no CPUs need
excluding.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Link: https://lore.kernel.org/r/20240213184438.16675-22-james.morse@arm.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
The resctrl architecture specific code may need to create a domain when a CPU
comes online, it also needs to reset the CPUs PQR_ASSOC register. The resctrl
filesystem code needs to update the rdtgroup_default CPU mask when CPUs are
brought online.
Currently, this is all done in one function, resctrl_online_cpu(). It will
need to be split into architecture and filesystem parts before resctrl can be
moved to /fs/.
Pull the rdtgroup_default update work out as a filesystem specific cpu_online
helper. resctrl_online_cpu() is the obvious name for this, which means the
version in core.c needs renaming.
resctrl_online_cpu() is called by the arch code once it has done the work to
add the new CPU to any domains.
In future patches, resctrl_online_cpu() will take the rdtgroup_mutex itself.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Link: https://lore.kernel.org/r/20240213184438.16675-21-james.morse@arm.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
resctrl reads rdt_alloc_capable or rdt_mon_capable to determine whether any of
the resources support the corresponding features. resctrl also uses the
static keys that affect the architecture's context-switch code to determine the
same thing.
This forces another architecture to have the same static keys.
As the static key is enabled based on the capable flag, and none of the
filesystem uses of these are in the scheduler path, move the capable flags
behind helpers, and use these in the filesystem code instead of the static key.
After this change, only the architecture code manages and uses the static keys
to ensure __resctrl_sched_in() does not need runtime checks.
This avoids multiple architectures having to define the same static keys.
Cases where the static key implicitly tested if the resctrl filesystem was
mounted all have an explicit check now.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Link: https://lore.kernel.org/r/20240213184438.16675-20-james.morse@arm.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
rdt_enable_key is switched when resctrl is mounted. It was also previously used
to prevent a second mount of the filesystem.
Any other architecture that wants to support resctrl has to provide identical
static keys.
Now that there are helpers for enabling and disabling the alloc/mon keys,
resctrl doesn't need to switch this extra key, it can be done by the arch code.
Use the static-key increment and decrement helpers, and change resctrl to
ensure the calls are balanced.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Link: https://lore.kernel.org/r/20240213184438.16675-19-james.morse@arm.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
resctrl enables three static keys depending on the features it has enabled.
Another architecture's context switch code may look different, any static keys
that control it should be buried behind helpers.
Move the alloc/mon logic into arch-specific helpers as a preparatory step for
making the rdt_enable_key's status something the arch code decides.
This means other architectures don't have to mirror the static keys.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Link: https://lore.kernel.org/r/20240213184438.16675-18-james.morse@arm.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
The rdt_enable_key is switched when resctrl is mounted, and used to prevent
a second mount of the filesystem. It also enables the architecture's context
switch code.
This requires another architecture to have the same set of static keys, as
resctrl depends on them too. The existing users of these static keys are
implicitly also checking if the filesystem is mounted.
Make the resctrl_mounted checks explicit: resctrl can keep track of whether it
has been mounted once. This doesn't need to be combined with whether the arch
code is context switching the CLOSID.
rdt_mon_enable_key is never used just to test that resctrl is mounted, but does
also have this implication. Add a resctrl_mounted to all uses of
rdt_mon_enable_key.
This will allow the static key changing to be moved behind resctrl_arch_ calls.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Link: https://lore.kernel.org/r/20240213184438.16675-17-james.morse@arm.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
When switching tasks, the CLOSID and RMID that the new task should use
are stored in struct task_struct. For x86 the CLOSID known by resctrl,
the value in task_struct, and the value written to the CPU register are
all the same thing.
MPAM's CPU interface has two different PARTIDs - one for data accesses
the other for instruction fetch. Storing resctrl's CLOSID value in
struct task_struct implies the arch code knows whether resctrl is using
CDP.
Move the matching and setting of the struct task_struct properties to
use helpers. This allows arm64 to store the hardware format of the
register, instead of having to convert it each time.
__rdtgroup_move_task()s use of READ_ONCE()/WRITE_ONCE() ensures torn
values aren't seen as another CPU may schedule the task being moved
while the value is being changed. MPAM has an additional corner-case
here as the PMG bits extend the PARTID space.
If the scheduler sees a new-CLOSID but old-RMID, the task will dirty an
RMID that the limbo code is not watching causing an inaccurate count.
x86's RMID are independent values, so the limbo code will still be
watching the old-RMID in this circumstance.
To avoid this, arm64 needs both the CLOSID/RMID WRITE_ONCE()d together.
Both values must be provided together.
Because MPAM's RMID values are not unique, the CLOSID must be provided
when matching the RMID.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Link: https://lore.kernel.org/r/20240213184438.16675-12-james.morse@arm.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
MPAM's PMG bits extend its PARTID space, meaning the same PMG value can be used
for different control groups.
This means once a CLOSID is allocated, all its monitoring ids may still be
dirty, and held in limbo.
Instead of allocating the first free CLOSID, on architectures where
CONFIG_RESCTRL_RMID_DEPENDS_ON_CLOSID is enabled, search
closid_num_dirty_rmid[] to find the cleanest CLOSID.
The CLOSID found is returned to closid_alloc() for the free list
to be updated.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Link: https://lore.kernel.org/r/20240213184438.16675-11-james.morse@arm.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
The resctrl CLOSID allocator uses a single 32bit word to track which
CLOSID are free. The setting and clearing of bits is open coded.
Convert the existing open coded bit manipulations of closid_free_map
to use __set_bit() and friends. These don't need to be atomic as this
list is protected by the mutex.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Link: https://lore.kernel.org/r/20240213184438.16675-10-james.morse@arm.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
MPAMs RMID values are not unique unless the CLOSID is considered as well.
alloc_rmid() expects the RMID to be an independent number.
Pass the CLOSID in to alloc_rmid(). Use this to compare indexes when
allocating. If the CLOSID is not relevant to the index, this ends up comparing
the free RMID with itself, and the first free entry will be used. With MPAM the
CLOSID is included in the index, so this becomes a walk of the free RMID
entries, until one that matches the supplied CLOSID is found.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Link: https://lore.kernel.org/r/20240213184438.16675-8-james.morse@arm.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
x86 systems identify traffic using the CLOSID and RMID. The CLOSID is
used to lookup the control policy, the RMID is used for monitoring. For
x86 these are independent numbers.
Arm's MPAM has equivalent features PARTID and PMG, where the PARTID is
used to lookup the control policy. The PMG in contrast is a small number
of bits that are used to subdivide PARTID when monitoring. The
cache-occupancy monitors require the PARTID to be specified when
monitoring.
This means MPAM's PMG field is not unique. There are multiple PMG-0, one
per allocated CLOSID/PARTID. If PMG is treated as equivalent to RMID, it
cannot be allocated as an independent number. Bitmaps like rmid_busy_llc
need to be sized by the number of unique entries for this resource.
Treat the combined CLOSID and RMID as an index, and provide architecture
helpers to pack and unpack an index. This makes the MPAM values unique.
The domain's rmid_busy_llc and rmid_ptrs[] are then sized by index, as
are domain mbm_local[] and mbm_total[].
x86 can ignore the CLOSID field when packing and unpacking an index, and
report as many indexes as RMID.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Link: https://lore.kernel.org/r/20240213184438.16675-7-james.morse@arm.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
x86's RMID are independent of the CLOSID. An RMID can be allocated,
used and freed without considering the CLOSID.
MPAM's equivalent feature is PMG, which is not an independent number,
it extends the CLOSID/PARTID space. For MPAM, only PMG-bits worth of
'RMID' can be allocated for a single CLOSID.
i.e. if there is 1 bit of PMG space, then each CLOSID can have two
monitor groups.
To allow resctrl to disambiguate RMID values for different CLOSID,
everything in resctrl that keeps an RMID value needs to know the CLOSID
too. This will always be ignored on x86.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Xin Hao <xhao@linux.alibaba.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Link: https://lore.kernel.org/r/20240213184438.16675-6-james.morse@arm.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
RMIDs are allocated for each monitor or control group directory, because
each of these needs its own RMID. For control groups,
rdtgroup_mkdir_ctrl_mon() later goes on to allocate the CLOSID.
MPAM's equivalent of RMID is not an independent number, so can't be
allocated until the CLOSID is known. An RMID allocation for one CLOSID
may fail, whereas another may succeed depending on how many monitor
groups a control group has.
The RMID allocation needs to move to be after the CLOSID has been
allocated.
Move the RMID allocation out of mkdir_rdt_prepare() to occur in its caller,
after the mkdir_rdt_prepare() call. This allows the RMID allocator to
know the CLOSID.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Link: https://lore.kernel.org/r/20240213184438.16675-5-james.morse@arm.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
When monitoring is supported, each monitor and control group is allocated an
RMID. For control groups, rdtgroup_mkdir_ctrl_mon() later goes on to allocate
the CLOSID.
MPAM's equivalent of RMID are not an independent number, so can't be allocated
until the CLOSID is known. An RMID allocation for one CLOSID may fail, whereas
another may succeed depending on how many monitor groups a control group has.
The RMID allocation needs to move to be after the CLOSID has been allocated.
Move the RMID allocation and mondata dir creation to a helper.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Link: https://lore.kernel.org/r/20240213184438.16675-4-james.morse@arm.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
The kernel test robot reported the following warning after commit
54e35eb861 ("x86/resctrl: Read supported bandwidth sources from CPUID").
even though the issue is present even in the original commit
92bd5a1390 ("x86/resctrl: Add interface to write mbm_total_bytes_config")
which added this function. The reported warning is:
$ make C=1 CHECK=scripts/coccicheck arch/x86/kernel/cpu/resctrl/rdtgroup.o
...
arch/x86/kernel/cpu/resctrl/rdtgroup.c:1621:5-8: Unneeded variable: "ret". Return "0" on line 1655
Remove the local variable 'ret'.
[ bp: Massage commit message, make mbm_config_write_domain() void. ]
Fixes: 92bd5a1390 ("x86/resctrl: Add interface to write mbm_total_bytes_config")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202401241810.jbd8Ipa1-lkp@intel.com/
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/r/202401241810.jbd8Ipa1-lkp@intel.com
If the BMEC (Bandwidth Monitoring Event Configuration) feature is
supported, the bandwidth events can be configured. The maximum supported
bandwidth bitmask can be read from CPUID:
CPUID_Fn80000020_ECX_x03 [Platform QoS Monitoring Bandwidth Event Configuration]
Bits Description
31:7 Reserved
6:0 Identifies the bandwidth sources that can be tracked.
While at it, move the mask checking to mon_config_write() before
iterating over all the domains. Also, print the valid bitmask when the
user tries to configure invalid event configuration value.
The CPUID details are documented in the Processor Programming Reference
(PPR) Vol 1.1 for AMD Family 19h Model 11h B1 - 55901 Rev 0.25 in the
Link tag.
Fixes: dc2a3e8579 ("x86/resctrl: Add interface to read mbm_total_bytes_config")
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206537
Link: https://lore.kernel.org/r/669896fa512c7451319fa5ca2fdb6f7e015b5635.1705359148.git.babu.moger@amd.com
In x86, hardware uses RMID to identify a monitoring group. When a user
creates a monitor group these details are not visible. These details
can help resctrl debugging.
Add RMID(mon_hw_id) to the monitor groups display in the resctrl interface.
Users can see these details when resctrl is mounted with "-o debug" option.
Add RFTYPE_MON_BASE that complements existing RFTYPE_CTRL_BASE and
represents files belonging to monitoring groups.
Other architectures do not use "RMID". Use the name mon_hw_id to refer
to "RMID" in an effort to keep the naming generic.
For example:
$cat /sys/fs/resctrl/mon_groups/mon_grp1/mon_hw_id
3
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Peter Newman <peternewman@google.com>
Reviewed-by: Tan Shaopeng <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Tan Shaopeng <tan.shaopeng@jp.fujitsu.com>
Link: https://lore.kernel.org/r/20231017002308.134480-10-babu.moger@amd.com
Files unique to monitoring groups have the RFTYPE_MON flag. When a new
monitoring group is created the resctrl files with flags RFTYPE_BASE
(files common to all resource groups) and RFTYPE_MON (files unique to
monitoring groups) are created to support interacting with the new
monitoring group.
A resource group can support both monitoring and control, also termed
a CTRL_MON resource group. CTRL_MON groups should get both monitoring
and control resctrl files but that is not the case. Only the
RFTYPE_BASE and RFTYPE_CTRL files are created for CTRL_MON groups.
Ensure that files with the RFTYPE_MON flag are created for CTRL_MON groups.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Peter Newman <peternewman@google.com>
Reviewed-by: Tan Shaopeng <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Tan Shaopeng <tan.shaopeng@jp.fujitsu.com>
Link: https://lore.kernel.org/r/20231017002308.134480-9-babu.moger@amd.com
In x86, hardware uses CLOSID to identify a control group. When a user
creates a control group this information is not visible to the user. It
can help resctrl debugging.
Add CLOSID(ctrl_hw_id) to the control groups display in the resctrl
interface. Users can see this detail when resctrl is mounted with the
"-o debug" option.
Other architectures do not use "CLOSID". Use the names ctrl_hw_id to refer
to "CLOSID" in an effort to keep the naming generic.
For example:
$cat /sys/fs/resctrl/ctrl_grp1/ctrl_hw_id
1
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Peter Newman <peternewman@google.com>
Reviewed-by: Tan Shaopeng <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Tan Shaopeng <tan.shaopeng@jp.fujitsu.com>
Link: https://lore.kernel.org/r/20231017002308.134480-8-babu.moger@amd.com
Add "-o debug" option to mount resctrl filesystem in debug mode. When
in debug mode resctrl displays files that have the new RFTYPE_DEBUG flag
to help resctrl debugging.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Peter Newman <peternewman@google.com>
Reviewed-by: Tan Shaopeng <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Tan Shaopeng <tan.shaopeng@jp.fujitsu.com>
Link: https://lore.kernel.org/r/20231017002308.134480-7-babu.moger@amd.com
The default resource group and its files are created during kernel init
time. Upcoming changes will make some resctrl files optional based on
a mount parameter. If optional files are to be added to the default
group based on the mount option, then each new file needs to be created
separately and call kernfs_activate() again.
Create all files of the default resource group during resctrl mount,
destroyed during unmount, to avoid scattering resctrl file addition
across two separate code flows.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Peter Newman <peternewman@google.com>
Reviewed-by: Tan Shaopeng <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Tan Shaopeng <tan.shaopeng@jp.fujitsu.com>
Link: https://lore.kernel.org/r/20231017002308.134480-6-babu.moger@amd.com
rdt_enable_ctx() enables the features provided during resctrl mount.
Additions to rdt_enable_ctx() are required to also modify error paths
of rdt_enable_ctx() callers to ensure correct unwinding if errors
are encountered after calling rdt_enable_ctx(). This is error prone.
Introduce rdt_disable_ctx() to refactor the error unwinding of
rdt_enable_ctx() to simplify future additions. This also simplifies
cleanup in rdt_kill_sb().
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Peter Newman <peternewman@google.com>
Reviewed-by: Tan Shaopeng <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Tan Shaopeng <tan.shaopeng@jp.fujitsu.com>
Link: https://lore.kernel.org/r/20231017002308.134480-5-babu.moger@amd.com
resctrl associates rftype flags with its files so that files can be chosen
based on the resource, whether it is info or base, and if it is control
or monitor type file. These flags use the RF_ as well as RFTYPE_ prefixes.
Change the prefix to RFTYPE_ for all these flags to be consistent.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Peter Newman <peternewman@google.com>
Reviewed-by: Tan Shaopeng <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Tan Shaopeng <tan.shaopeng@jp.fujitsu.com>
Link: https://lore.kernel.org/r/20231017002308.134480-4-babu.moger@amd.com
The rftype flags are bitmaps used for adding files under the resctrl
filesystem. Some of these bitmap defines have one extra level of
indirection which is not necessary.
Drop the RF_* defines and simplify the macros.
[ bp: Massage commit message. ]
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Peter Newman <peternewman@google.com>
Reviewed-by: Tan Shaopeng <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Tan Shaopeng <tan.shaopeng@jp.fujitsu.com>
Link: https://lore.kernel.org/r/20231017002308.134480-3-babu.moger@amd.com
The resctrl task assignment for monitor or control group needs to be
done one at a time. For example:
$mount -t resctrl resctrl /sys/fs/resctrl/
$mkdir /sys/fs/resctrl/ctrl_grp1
$echo 123 > /sys/fs/resctrl/ctrl_grp1/tasks
$echo 456 > /sys/fs/resctrl/ctrl_grp1/tasks
$echo 789 > /sys/fs/resctrl/ctrl_grp1/tasks
This is not user-friendly when dealing with hundreds of tasks.
Support multiple task assignment in one command with tasks ids separated
by commas. For example:
$echo 123,456,789 > /sys/fs/resctrl/ctrl_grp1/tasks
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Peter Newman <peternewman@google.com>
Reviewed-by: Tan Shaopeng <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Tan Shaopeng <tan.shaopeng@jp.fujitsu.com>
Link: https://lore.kernel.org/r/20231017002308.134480-2-babu.moger@amd.com
Add the interface in resctrl FS to show if sparse cache allocation
bit masks are supported on the platform. Reading the file returns
either a "1" if non-contiguous 1s are supported and "0" otherwise.
The file path is /sys/fs/resctrl/info/{resource}/sparse_masks, where
{resource} can be either "L2" or "L3".
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Peter Newman <peternewman@google.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Peter Newman <peternewman@google.com>
Link: https://lore.kernel.org/r/7300535160beba41fd8aa073749ec1ee29b4621f.1696934091.git.maciej.wieczor-retman@intel.com
The kernel test robot reported kernel-doc warnings here:
arch/x86/kernel/cpu/resctrl/rdtgroup.c:915: warning: Function parameter or member 'of' not described in 'rdt_bit_usage_show'
arch/x86/kernel/cpu/resctrl/rdtgroup.c:915: warning: Function parameter or member 'seq' not described in 'rdt_bit_usage_show'
arch/x86/kernel/cpu/resctrl/rdtgroup.c:915: warning: Function parameter or member 'v' not described in 'rdt_bit_usage_show'
arch/x86/kernel/cpu/resctrl/rdtgroup.c:1144: warning: Function parameter or member 'type' not described in '__rdtgroup_cbm_overlaps'
arch/x86/kernel/cpu/resctrl/rdtgroup.c:1224: warning: Function parameter or member 'rdtgrp' not described in 'rdtgroup_mode_test_exclusive'
arch/x86/kernel/cpu/resctrl/rdtgroup.c:1261: warning: Function parameter or member 'of' not described in 'rdtgroup_mode_write'
arch/x86/kernel/cpu/resctrl/rdtgroup.c:1261: warning: Function parameter or member 'buf' not described in 'rdtgroup_mode_write'
arch/x86/kernel/cpu/resctrl/rdtgroup.c:1261: warning: Function parameter or member 'nbytes' not described in 'rdtgroup_mode_write'
arch/x86/kernel/cpu/resctrl/rdtgroup.c:1261: warning: Function parameter or member 'off' not described in 'rdtgroup_mode_write'
arch/x86/kernel/cpu/resctrl/rdtgroup.c:1370: warning: Function parameter or member 'of' not described in 'rdtgroup_size_show'
arch/x86/kernel/cpu/resctrl/rdtgroup.c:1370: warning: Function parameter or member 's' not described in 'rdtgroup_size_show'
arch/x86/kernel/cpu/resctrl/rdtgroup.c:1370: warning: Function parameter or member 'v' not described in 'rdtgroup_size_show'
The first two functions are missing an argument description while the
other three are file callbacks and don't require a kernel-doc comment.
Closes: https://lore.kernel.org/oe-kbuild-all/202310070434.mD8eRNAz-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Newman <peternewman@google.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/r/20231011064843.246592-1-maciej.wieczor-retman@intel.com
To change the resources allocated to a large group of tasks, such as an
application container, a container manager must write all of the tasks'
IDs into the tasks file interface of the new control group. This is
challenging when the container's task list is always changing.
In addition, if the container manager is using monitoring groups to
separately track the bandwidth of containers assigned to the same
control group, when moving a container, it must first move the
container's tasks to the default monitoring group of the new control
group before it can move these tasks into the container's replacement
monitoring group under the destination control group. This is
undesirable because it makes bandwidth usage during the move
unattributable to the correct tasks and resets monitoring event counters
and cache usage information for the group.
Implement the rename operation only for resctrlfs monitor groups to
enable users to move a monitoring group from one control group to
another. This effects a change in resources allocated to all the tasks
in the monitoring group while otherwise leaving the monitoring data
intact.
Signed-off-by: Peter Newman <peternewman@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20230419125015.693566-3-peternewman@google.com
rdtgroup_kn_lock_live() can only release a kernfs reference for a single
file before waiting on the rdtgroup_mutex, limiting its usefulness for
operations on multiple files, such as rename.
Factor the work needed to respectively break and unbreak active
protection on an individual file into rdtgroup_kn_{get,put}().
No functional change.
Signed-off-by: Peter Newman <peternewman@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20230419125015.693566-2-peternewman@google.com
When writing a task id to the "tasks" file in an rdtgroup,
rdtgroup_tasks_write() treats the pid as a number in the current pid
namespace. But when reading the "tasks" file, rdtgroup_tasks_show() shows
the list of global pids from the init namespace, which is confusing and
incorrect.
To be more robust, let the "tasks" file only show pids in the current pid
namespace.
Fixes: e02737d5b8 ("x86/intel_rdt: Add tasks files")
Signed-off-by: Shawn Wang <shawnwang@linux.alibaba.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Reinette Chatre <reinette.chatre@intel.com>
Acked-by: Fenghua Yu <fenghua.yu@intel.com>
Tested-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/all/20230116071246.97717-1-shawnwang@linux.alibaba.com/
As a temporary storage, staged_config[] in rdt_domain should be cleared
before and after it is used. The stale value in staged_config[] could
cause an MSR access error.
Here is a reproducer on a system with 16 usable CLOSIDs for a 15-way L3
Cache (MBA should be disabled if the number of CLOSIDs for MB is less than
16.) :
mount -t resctrl resctrl -o cdp /sys/fs/resctrl
mkdir /sys/fs/resctrl/p{1..7}
umount /sys/fs/resctrl/
mount -t resctrl resctrl /sys/fs/resctrl
mkdir /sys/fs/resctrl/p{1..8}
An error occurs when creating resource group named p8:
unchecked MSR access error: WRMSR to 0xca0 (tried to write 0x00000000000007ff) at rIP: 0xffffffff82249142 (cat_wrmsr+0x32/0x60)
Call Trace:
<IRQ>
__flush_smp_call_function_queue+0x11d/0x170
__sysvec_call_function+0x24/0xd0
sysvec_call_function+0x89/0xc0
</IRQ>
<TASK>
asm_sysvec_call_function+0x16/0x20
When creating a new resource control group, hardware will be configured
by the following process:
rdtgroup_mkdir()
rdtgroup_mkdir_ctrl_mon()
rdtgroup_init_alloc()
resctrl_arch_update_domains()
resctrl_arch_update_domains() iterates and updates all resctrl_conf_type
whose have_new_ctrl is true. Since staged_config[] holds the same values as
when CDP was enabled, it will continue to update the CDP_CODE and CDP_DATA
configurations. When group p8 is created, get_config_index() called in
resctrl_arch_update_domains() will return 16 and 17 as the CLOSIDs for
CDP_CODE and CDP_DATA, which will be translated to an invalid register -
0xca0 in this scenario.
Fix it by clearing staged_config[] before and after it is used.
[reinette: re-order commit tags]
Fixes: 75408e4350 ("x86/resctrl: Allow different CODE/DATA configurations to be staged")
Suggested-by: Xin Hao <xhao@linux.alibaba.com>
Signed-off-by: Shawn Wang <shawnwang@linux.alibaba.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Tested-by: Reinette Chatre <reinette.chatre@intel.com>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/2fad13f49fbe89687fc40e9a5a61f23a28d1507a.1673988935.git.reinette.chatre%40intel.com
The implementation of 'current' on x86 is very intentionally special: it
is a very common thing to look up, and it uses 'this_cpu_read_stable()'
to get the current thread pointer efficiently from per-cpu storage.
And the keyword in there is 'stable': the current thread pointer never
changes as far as a single thread is concerned. Even if when a thread
is preempted, or moved to another CPU, or even across an explicit call
'schedule()' that thread will still have the same value for 'current'.
It is, after all, the kernel base pointer to thread-local storage.
That's why it's stable to begin with, but it's also why it's important
enough that we have that special 'this_cpu_read_stable()' access for it.
So this is all done very intentionally to allow the compiler to treat
'current' as a value that never visibly changes, so that the compiler
can do CSE and combine multiple different 'current' accesses into one.
However, there is obviously one very special situation when the
currently running thread does actually change: inside the scheduler
itself.
So the scheduler code paths are special, and do not have a 'current'
thread at all. Instead there are _two_ threads: the previous and the
next thread - typically called 'prev' and 'next' (or prev_p/next_p)
internally.
So this is all actually quite straightforward and simple, and not all
that complicated.
Except for when you then have special code that is run in scheduler
context, that code then has to be aware that 'current' isn't really a
valid thing. Did you mean 'prev'? Did you mean 'next'?
In fact, even if then look at the code, and you use 'current' after the
new value has been assigned to the percpu variable, we have explicitly
told the compiler that 'current' is magical and always stable. So the
compiler is quite free to use an older (or newer) value of 'current',
and the actual assignment to the percpu storage is not relevant even if
it might look that way.
Which is exactly what happened in the resctl code, that blithely used
'current' in '__resctrl_sched_in()' when it really wanted the new
process state (as implied by the name: we're scheduling 'into' that new
resctl state). And clang would end up just using the old thread pointer
value at least in some configurations.
This could have happened with gcc too, and purely depends on random
compiler details. Clang just seems to have been more aggressive about
moving the read of the per-cpu current_task pointer around.
The fix is trivial: just make the resctl code adhere to the scheduler
rules of using the prev/next thread pointer explicitly, instead of using
'current' in a situation where it just wasn't valid.
That same code is then also used outside of the scheduler context (when
a thread resctl state is explicitly changed), and then we will just pass
in 'current' as that pointer, of course. There is no ambiguity in that
case.
The fix may be trivial, but noticing and figuring out what went wrong
was not. The credit for that goes to Stephane Eranian.
Reported-by: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/lkml/20230303231133.1486085-1-eranian@google.com/
Link: https://lore.kernel.org/lkml/alpine.LFD.2.01.0908011214330.3304@localhost.localdomain/
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Tested-by: Stephane Eranian <eranian@google.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
clang correctly complains
arch/x86/kernel/cpu/resctrl/rdtgroup.c:1456:6: warning: variable \
'h' set but not used [-Wunused-but-set-variable]
u32 h;
^
but it can't know whether this use is innocuous or really a problem.
There's a reason why those warning switches are behind a W=1 and not
enabled by default - yes, one needs to do:
make W=1 CC=clang HOSTCC=clang arch/x86/kernel/cpu/resctrl/
with clang 14 in order to trigger it.
I would normally not take a silly fix like that but this one is simple
and doesn't make the code uglier so...
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/202301242015.kbzkVteJ-lkp@intel.com
The event configuration for mbm_local_bytes can be changed by the
user by writing to the configuration file
/sys/fs/resctrl/info/L3_MON/mbm_local_bytes_config.
The event configuration settings are domain specific and will affect all
the CPUs in the domain.
Following are the types of events supported:
==== ===========================================================
Bits Description
==== ===========================================================
6 Dirty Victims from the QOS domain to all types of memory
5 Reads to slow memory in the non-local NUMA domain
4 Reads to slow memory in the local NUMA domain
3 Non-temporal writes to non-local NUMA domain
2 Non-temporal writes to local NUMA domain
1 Reads to memory in the non-local NUMA domain
0 Reads to memory in the local NUMA domain
==== ===========================================================
For example, to change the mbm_local_bytes_config to count all the non-temporal
writes on domain 0, the bits 2 and 3 needs to be set which is 1100b (in hex
0xc).
Run the command:
$echo 0=0xc > /sys/fs/resctrl/info/L3_MON/mbm_local_bytes_config
To change the mbm_local_bytes to count only reads to local NUMA domain 1,
the bit 0 needs to be set which 1b (in hex 0x1). Run the command:
$echo 1=0x1 > /sys/fs/resctrl/info/L3_MON/mbm_local_bytes_config
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/r/20230113152039.770054-13-babu.moger@amd.com
The event configuration for mbm_total_bytes can be changed by the user by
writing to the file /sys/fs/resctrl/info/L3_MON/mbm_total_bytes_config.
The event configuration settings are domain specific and affect all the
CPUs in the domain.
Following are the types of events supported:
==== ===========================================================
Bits Description
==== ===========================================================
6 Dirty Victims from the QOS domain to all types of memory
5 Reads to slow memory in the non-local NUMA domain
4 Reads to slow memory in the local NUMA domain
3 Non-temporal writes to non-local NUMA domain
2 Non-temporal writes to local NUMA domain
1 Reads to memory in the non-local NUMA domain
0 Reads to memory in the local NUMA domain
==== ===========================================================
For example:
To change the mbm_total_bytes to count only reads on domain 0, the bits
0, 1, 4 and 5 needs to be set, which is 110011b (in hex 0x33).
Run the command:
$echo 0=0x33 > /sys/fs/resctrl/info/L3_MON/mbm_total_bytes_config
To change the mbm_total_bytes to count all the slow memory reads on domain 1,
the bits 4 and 5 needs to be set which is 110000b (in hex 0x30).
Run the command:
$echo 1=0x30 > /sys/fs/resctrl/info/L3_MON/mbm_total_bytes_config
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/r/20230113152039.770054-12-babu.moger@amd.com
The event configuration can be viewed by the user by reading the configuration
file /sys/fs/resctrl/info/L3_MON/mbm_local_bytes_config. The event
configuration settings are domain specific and will affect all the CPUs in the
domain.
Following are the types of events supported:
==== ===========================================================
Bits Description
==== ===========================================================
6 Dirty Victims from the QOS domain to all types of memory
5 Reads to slow memory in the non-local NUMA domain
4 Reads to slow memory in the local NUMA domain
3 Non-temporal writes to non-local NUMA domain
2 Non-temporal writes to local NUMA domain
1 Reads to memory in the non-local NUMA domain
0 Reads to memory in the local NUMA domain
==== ===========================================================
By default, the mbm_local_bytes_config is set to 0x15 to count all the local
event types.
For example:
$cat /sys/fs/resctrl/info/L3_MON/mbm_local_bytes_config
0=0x15;1=0x15;2=0x15;3=0x15
In this case, the event mbm_local_bytes is configured with 0x15 on
domains 0 to 3.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/r/20230113152039.770054-11-babu.moger@amd.com
The event configuration can be viewed by the user by reading the
configuration file /sys/fs/resctrl/info/L3_MON/mbm_total_bytes_config. The
event configuration settings are domain specific and will affect all the CPUs in
the domain.
Following are the types of events supported:
==== ===========================================================
Bits Description
==== ===========================================================
6 Dirty Victims from the QOS domain to all types of memory
5 Reads to slow memory in the non-local NUMA domain
4 Reads to slow memory in the local NUMA domain
3 Non-temporal writes to non-local NUMA domain
2 Non-temporal writes to local NUMA domain
1 Reads to memory in the non-local NUMA domain
0 Reads to memory in the local NUMA domain
==== ===========================================================
By default, the mbm_total_bytes_config is set to 0x7f to count all the
event types.
For example:
$cat /sys/fs/resctrl/info/L3_MON/mbm_total_bytes_config
0=0x7f;1=0x7f;2=0x7f;3=0x7f
In this case, the event mbm_total_bytes is configured with 0x7f on
domains 0 to 3.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/r/20230113152039.770054-10-babu.moger@amd.com
Add a new field in struct mon_evt to support Bandwidth Monitoring Event
Configuration (BMEC) and also update the "mon_features" display.
The resctrl file "mon_features" will display the supported events
and files that can be used to configure those events if monitor
configuration is supported.
Before the change:
$ cat /sys/fs/resctrl/info/L3_MON/mon_features
llc_occupancy
mbm_total_bytes
mbm_local_bytes
After the change when BMEC is supported:
$ cat /sys/fs/resctrl/info/L3_MON/mon_features
llc_occupancy
mbm_total_bytes
mbm_total_bytes_config
mbm_local_bytes
mbm_local_bytes_config
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/r/20230113152039.770054-9-babu.moger@amd.com
The QoS slow memory configuration details are available via
CPUID_Fn80000020_EDX_x02. Detect the available details and
initialize the rest to defaults.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/r/20230113152039.770054-7-babu.moger@amd.com
on_each_cpu_mask() runs the function on each CPU specified by cpumask,
which may include the local processor.
Replace smp_call_function_many() with on_each_cpu_mask() to simplify
the code.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/r/20230113152039.770054-2-babu.moger@amd.com
When the user moves a running task to a new rdtgroup using the task's
file interface or by deleting its rdtgroup, the resulting change in
CLOSID/RMID must be immediately propagated to the PQR_ASSOC MSR on the
task(s) CPUs.
x86 allows reordering loads with prior stores, so if the task starts
running between a task_curr() check that the CPU hoisted before the
stores in the CLOSID/RMID update then it can start running with the old
CLOSID/RMID until it is switched again because __rdtgroup_move_task()
failed to determine that it needs to be interrupted to obtain the new
CLOSID/RMID.
Refer to the diagram below:
CPU 0 CPU 1
----- -----
__rdtgroup_move_task():
curr <- t1->cpu->rq->curr
__schedule():
rq->curr <- t1
resctrl_sched_in():
t1->{closid,rmid} -> {1,1}
t1->{closid,rmid} <- {2,2}
if (curr == t1) // false
IPI(t1->cpu)
A similar race impacts rdt_move_group_tasks(), which updates tasks in a
deleted rdtgroup.
In both cases, use smp_mb() to order the task_struct::{closid,rmid}
stores before the loads in task_curr(). In particular, in the
rdt_move_group_tasks() case, simply execute an smp_mb() on every
iteration with a matching task.
It is possible to use a single smp_mb() in rdt_move_group_tasks(), but
this would require two passes and a means of remembering which
task_structs were updated in the first loop. However, benchmarking
results below showed too little performance impact in the simple
approach to justify implementing the two-pass approach.
Times below were collected using `perf stat` to measure the time to
remove a group containing a 1600-task, parallel workload.
CPU: Intel(R) Xeon(R) Platinum P-8136 CPU @ 2.00GHz (112 threads)
# mkdir /sys/fs/resctrl/test
# echo $$ > /sys/fs/resctrl/test/tasks
# perf bench sched messaging -g 40 -l 100000
task-clock time ranges collected using:
# perf stat rmdir /sys/fs/resctrl/test
Baseline: 1.54 - 1.60 ms
smp_mb() every matching task: 1.57 - 1.67 ms
[ bp: Massage commit message. ]
Fixes: ae28d1aae4 ("x86/resctrl: Use an IPI instead of task_work_add() to update PQR_ASSOC MSR")
Fixes: 0efc89be94 ("x86/intel_rdt: Update task closid immediately on CPU in rmdir and unmount")
Signed-off-by: Peter Newman <peternewman@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/20221220161123.432120-1-peternewman@google.com
resctrl_rmid_realloc_threshold can be set by user-space. The maximum
value is specified by the architecture.
Currently max_threshold_occ_write() reads the maximum value from
boot_cpu_data.x86_cache_size, which is not portable to another
architecture.
Add resctrl_rmid_realloc_limit to describe the maximum size in bytes
that user-space can set the threshold to.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <quic_jiles@quicinc.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20220902154829.30399-21-james.morse@arm.com
resctrl_cqm_threshold is stored in a hardware specific chunk size,
but exposed to user-space as bytes.
This means the filesystem parts of resctrl need to know how the hardware
counts, to convert the user provided byte value to chunks. The interface
between the architecture's resctrl code and the filesystem ought to
treat everything as bytes.
Change the unit of resctrl_cqm_threshold to bytes. resctrl_arch_rmid_read()
still returns its value in chunks, so this needs converting to bytes.
As all the users have been touched, rename the variable to
resctrl_rmid_realloc_threshold, which describes what the value is for.
Neither r->num_rmid nor hw_res->mon_scale are guaranteed to be a power
of 2, so the existing code introduces a rounding error from resctrl's
theoretical fraction of the cache usage. This behaviour is kept as it
ensures the user visible value matches the value read from hardware
when the rmid will be reallocated.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <quic_jiles@quicinc.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20220902154829.30399-20-james.morse@arm.com
The resctrl arch code provides a second configuration array mbps_val[]
for the MBA software controller.
Since resctrl switched over to allocating and freeing its own array
when needed, nothing uses the arch code version.
Remove it.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <quic_jiles@quicinc.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20220902154829.30399-11-james.morse@arm.com
Updates to resctrl's software controller follow the same path as
other configuration updates, but they don't modify the hardware state.
rdtgroup_schemata_write() uses parse_line() and the resource's
parse_ctrlval() function to stage the configuration.
resctrl_arch_update_domains() then updates the mbps_val[] array
instead, and resctrl_arch_update_domains() skips the rdt_ctrl_update()
call that would update hardware.
This complicates the interface between resctrl's filesystem parts
and architecture specific code. It should be possible for mba_sc
to be completely implemented by the filesystem parts of resctrl. This
would allow it to work on a second architecture with no additional code.
resctrl_arch_update_domains() using the mbps_val[] array prevents this.
Change parse_bw() to write the configuration value directly to the
mbps_val[] array in the domain structure. Change rdtgroup_schemata_write()
to skip the call to resctrl_arch_update_domains(), meaning all the
mba_sc specific code in resctrl_arch_update_domains() can be removed.
On the read-side, show_doms() and update_mba_bw() are changed to read
the mbps_val[] array from the domain structure. With this,
resctrl_arch_get_config() no longer needs to consider mba_sc resources.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <quic_jiles@quicinc.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20220902154829.30399-10-james.morse@arm.com
To support resctrl's MBA software controller, the architecture must provide
a second configuration array to hold the mbps_val[] from user-space.
This complicates the interface between the architecture specific code and
the filesystem portions of resctrl that will move to /fs/, to allow
multiple architectures to support resctrl.
Make the filesystem parts of resctrl create an array for the mba_sc
values. The software controller can be changed to use this, allowing
the architecture code to only consider the values configured in hardware.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <quic_jiles@quicinc.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20220902154829.30399-9-james.morse@arm.com
To determine whether the mba_MBps option to resctrl should be supported,
resctrl tests the boot CPUs' x86_vendor.
This isn't portable, and needs abstracting behind a helper so this check
can be part of the filesystem code that moves to /fs/.
Re-use the tests set_mba_sc() does to determine if the mba_sc is supported
on this system. An 'alloc_capable' test is added so that support for the
controls isn't implied by the 'delay_linear' property, which is always
true for MPAM. Because mbm_update() only update mba_sc if the mbm_local
counters are enabled, supports_mba_mbps() checks is_mbm_local_enabled().
(instead of using is_mbm_enabled(), which checks both).
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <quic_jiles@quicinc.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20220902154829.30399-8-james.morse@arm.com
set_mba_sc() enables the 'software controller' to regulate the bandwidth
based on the byte counters. This can be managed entirely in the parts
of resctrl that move to /fs/, without any extra support from the
architecture specific code. set_mba_sc() is called by rdt_enable_ctx()
during mount and unmount. It currently resets the arch code's ctrl_val[]
and mbps_val[] arrays.
The ctrl_val[] was already reset when the domain was created, and by
reset_all_ctrls() when the filesystem was last unmounted. Doing the work
in set_mba_sc() is not necessary as the values are already at their
defaults due to the creation of the domain, or were previously reset
during umount(), or are about to reset during umount().
Add a reset of the mbps_val[] in reset_all_ctrls(), allowing the code in
set_mba_sc() that reaches in to the architecture specific structures to
be removed.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <quic_jiles@quicinc.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20220902154829.30399-7-james.morse@arm.com
Because domains are exposed to user-space via resctrl, the filesystem
must update its state when CPU hotplug callbacks are triggered.
Some of this work is common to any architecture that would support
resctrl, but the work is tied up with the architecture code to
free the memory.
Move the monitor subdir removal and the cancelling of the mbm/limbo
works into a new resctrl_offline_domain() call. These bits are not
specific to the architecture. Grouping them in one function allows
that code to be moved to /fs/ and re-used by another architecture.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <quic_jiles@quicinc.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20220902154829.30399-6-james.morse@arm.com
Because domains are exposed to user-space via resctrl, the filesystem
must update its state when CPU hotplug callbacks are triggered.
Some of this work is common to any architecture that would support
resctrl, but the work is tied up with the architecture code to
allocate the memory.
Move domain_setup_mon_state(), the monitor subdir creation call and the
mbm/limbo workers into a new resctrl_online_domain() call. These bits
are not specific to the architecture. Grouping them in one function
allows that code to be moved to /fs/ and re-used by another architecture.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <quic_jiles@quicinc.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20220902154829.30399-4-james.morse@arm.com
mon_enabled and mon_capable are always set as a pair by
rdt_get_mon_l3_config().
There is no point having two values.
Merge them together.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <quic_jiles@quicinc.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20220902154829.30399-3-james.morse@arm.com
rdt_resources_all[] used to have extra entries for L2CODE/L2DATA.
These were hidden from resctrl by the alloc_enabled value.
Now that the L2/L2CODE/L2DATA resources have been merged together,
alloc_enabled doesn't mean anything, it always has the same value as
alloc_capable which indicates allocation is supported by this resource.
Remove alloc_enabled and its helpers.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <quic_jiles@quicinc.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20220902154829.30399-2-james.morse@arm.com
In some cases, x86 code calls cpumask_weight() to check if any bit of a
given cpumask is set.
This can be done more efficiently with cpumask_empty() because
cpumask_empty() stops traversing the cpumask as soon as it finds first set
bit, while cpumask_weight() counts all bits unconditionally.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steve Wahl <steve.wahl@hpe.com>
Link: https://lore.kernel.org/r/20220210224933.379149-17-yury.norov@gmail.com
There is no need to have struct kernfs_root be part of kernfs.h for
the whole kernel to see and poke around it. Move it internal to kernfs
code and provide a helper function, kernfs_root_to_node(), to handle the
one field that kernfs users were directly accessing from the structure.
Cc: Imran Khan <imran.f.khan@oracle.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220222070713.3517679-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
resctrl_arch_get_config() has no return, but does pass a single value
back via one of its arguments.
Return the value instead.
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210811163831.14917-1-james.morse@arm.com
resctrl uses struct rdt_resource to describe the available hardware
resources. The domains of the CDP aliases share a single ctrl_val[]
array. The only differences between the struct rdt_hw_resource aliases
is the name and conf_type.
The name from struct rdt_hw_resource is visible to user-space. To
support another architecture, as many user-visible details should be
handled in the filesystem parts of the code that is common to all
architectures. The name and conf_type go together.
Remove conf_type and the CDP aliases. When CDP is supported and enabled,
schemata_list_create() can create two schemata using the single
resource, generating the CODE/DATA suffix to the schema name itself.
This allows the alloc_ctrlval_array() and complications around free()ing
the ctrl_val arrays to be removed.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-25-james.morse@arm.com
When CDP is enabled, rdt_cdp_peer_get() finds the alternative
CODE/DATA resource and returns the alternative domain. This is used
to determine if bitmaps overlap when there are aliased entries
in the two struct rdt_hw_resources.
Now that the ctrl_val[] used by the CODE/DATA resources is the same,
the search for an alternate resource/domain is not needed.
Replace rdt_cdp_peer_get() with resctrl_peer_type(), which returns
the alternative type. This can be passed to resctrl_arch_get_config()
with the same resource and domain.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-23-james.morse@arm.com
When resctrl comes to copy the CAT MSR values from the ctrl_val[] array
into hardware, it applies an offset adjustment based on the type of
the resource. CODE and DATA resources have their closid mapped into an
odd/even range. This mapping is based on a property of the resource.
This happens once the new control value has been written to the ctrl_val[]
array. Once the CDP resources are merged, there will only be a single
property that needs to cover both odd/even mappings to the single
ctrl_val[] array. The offset adjustment must be applied before the new
value is written to the array.
Move the logic from cat_wrmsr() to resctrl_arch_update_domains(). The
value provided to apply_config() is now an index in the array, not the
closid. The parameters provided via struct msr_param are now indexes
too. As resctrl's use of closid is a u32, struct msr_param's type is
changed to match.
With this, the CODE and DATA resources only use the odd or even
indexes in the array. This allows the temporary num_closid/2 fixes in
domain_setup_ctrlval() and reset_all_ctrls() to be removed.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-20-james.morse@arm.com
The CODE and DATA resources report a num_closid that is half the actual
size supported by the hardware. This behaviour is visible to user-space
when CDP is enabled.
The CODE and DATA resources have their own ctrlval arrays which are
half the size of the underlying hardware because num_closid was already
adjusted. One holds the odd configurations values, the other even.
Before the CDP resources can be merged, the 'half the closids' behaviour
needs to be implemented by schemata_list_create(), but this causes the
ctrl_val[] array to be full sized.
Remove the logic from the architecture specific rdt_get_cdp_config()
setup, and add it to schemata_list_create(). Functions that walk all the
configurations, such as domain_setup_ctrlval() and reset_all_ctrls(),
take num_closid directly from struct rdt_hw_resource also have
to halve num_closid as only the lower half of each array is in
use. domain_setup_ctrlval() and reset_all_ctrls() both copy struct
rdt_hw_resource's num_closid to a struct msr_param. Correct the value
here.
This is temporary as a subsequent patch will merge all three ctrl_val[]
arrays such that when CDP is in use, the CODA/DATA layout in the array
matches the hardware. reset_all_ctrls()'s loop over the whole of
ctrl_val[] is not touched as this is harmless, and will be required as
it is once the resources are merged.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-19-james.morse@arm.com
The ctrl_val[] array for a struct rdt_hw_resource only holds
configurations of one type. The type is implicit.
Once the CDP resources are merged, the ctrl_val[] array will hold all
the configurations for the hardware resource. When a particular type of
configuration is needed, it must be specified explicitly.
Pass the expected type from the schema into resctrl_arch_get_config().
Nothing uses this yet, but once a single ctrl_val[] array is used for
the three struct rdt_hw_resources that share hardware, the type will be
used to return the correct configuration value from the shared array.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-18-james.morse@arm.com
Functions like show_doms() reach into the architecture's private
structure to retrieve the configuration from the struct rdt_hw_resource.
The hardware configuration may look completely different to the
values resctrl gets from user-space. The staged configuration and
resctrl_arch_update_domains() allow the architecture to convert or
translate these values.
Resctrl shouldn't read or write the ctrl_val[] values directly. Add
a helper to read the current configuration. This will allow another
architecture to scale the bitmaps if necessary, and possibly use
controls that don't take the user-space control format at all.
Of the remaining functions that access ctrl_val[] directly,
apply_config() is part of the architecture-specific code, and is
called via resctrl_arch_update_domains(). reset_all_ctrls() will be an
architecture specific helper.
update_mba_bw() manipulates both ctrl_val[], mbps_val[] and the
hardware. The mbps_val[] that matches the mba_sc state of the resource
is changed, but the other is left unchanged. Abstracting this is the
subject of later patches that affect set_mba_sc() too.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-17-james.morse@arm.com
update_domains() merges the staged configuration changes into the arch
codes configuration array. Rename to make it clear it is part of the
arch code interface to resctrl.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-16-james.morse@arm.com
Before the CDP resources can be merged, struct rdt_domain will need an
array of struct resctrl_staged_config, one per type of configuration.
Use the type as an index to the array to ensure that a schema
configuration string can't specify the same domain twice. This will
allow two schemata to apply configuration changes to one resource.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-15-james.morse@arm.com
When configuration changes are made, the new value is written to struct
rdt_domain's new_ctrl field and the have_new_ctrl flag is set. Later
new_ctrl is copied to hardware by a call to update_domains().
Once the CDP resources are merged, there will be one new_ctrl field in
use by two struct resctrl_schema requiring a per-schema IPI to copy the
value to hardware.
Move new_ctrl and have_new_ctrl into a new struct resctrl_staged_config.
Before the CDP resources can be merged, struct rdt_domain will need an
array of these, one per type of configuration. Using the type as an
index to the array will ensure that a schema configuration string can't
specify the same domain twice.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-14-james.morse@arm.com
resctrl 'info' directories and schema parsing use the schema name.
This lives in the struct rdt_resource, and is specified by the
architecture code.
Once the CDP resources are merged, there will only be one resource (and
one name) in use by two schemata. To allow the CDP CODE/DATA property to
be the type of configuration the schema uses, the name should also be
per-schema.
Add a name field to struct resctrl_schema, and use this wherever
the schema name is exposed (or read from) user-space. Calculating
max_name_width for padding the schemata file also moves as this is
visible to user-space. As the names in struct rdt_resource already
include the CDP information, schemata_list_create() copies them.
schemata_list_create() includes the length of the CDP suffix when
calculating max_name_width in preparation for CDP resources being
merged.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-13-james.morse@arm.com
Whether CDP is enabled for a hardware resource like the L3 cache can be
found by inspecting the alloc_enabled flags of the L3CODE/L3DATA struct
rdt_hw_resources, even if they aren't in use.
Once these resources are merged, the flags can't be compared. Whether
CDP is enabled needs tracking explicitly. If another architecture is
emulating CDP the behaviour may not be per-resource. 'cdp_capable' needs
to be visible to resctrl, even if its not in use, as this affects the
padding of the schemata table visible to user-space.
Add cdp_enabled to struct rdt_hw_resource and cdp_capable to struct
rdt_resource. Add resctrl_arch_set_cdp_enabled() to let resctrl enable
or disable CDP on a resource. resctrl_arch_get_cdp_enabled() lets it
read the current state.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-12-james.morse@arm.com
struct pseudo_lock_region points to the rdt_resource.
Once the resources are merged, this won't be unique. The resource name
is moving into the schema, so that the filesystem portions of resctrl can
generate it.
Swap pseudo_lock_region's rdt_resource pointer for a schema pointer.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-11-james.morse@arm.com
Once the CDP resources are merged, there will be two struct
resctrl_schema for one struct rdt_resource. CDP becomes a type of
configuration that belongs to the schema.
Helpers like rdtgroup_cbm_overlaps() need access to the schema to query
the configuration (or configurations) based on schema properties.
Change these functions to take a struct schema instead of the struct
rdt_resource. All the modified functions are part of the filesystem code
that will move to /fs/resctrl once it is possible to support a second
architecture.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-10-james.morse@arm.com
To initialise struct resctrl_schema's num_closid, schemata_list_create()
reaches into the architectures private structure to retrieve num_closid
from the struct rdt_hw_resource. The 'half the closids' behaviour should
be part of the filesystem parts of resctrl that are the same on any
architecture. struct resctrl_schema's num_closid should include any
correction for CDP.
Having two properties called num_closid is likely to be confusing when
they have different values.
Add a helper to read the resource's num_closid from the arch code.
This should return the number of closid that the resource supports,
regardless of whether CDP is in use. Once the CDP resources are merged,
schemata_list_create() can apply the correction itself.
Using a type with an obvious size for the arch helper means changing the
type of num_closid to u32, which matches the type already used by struct
rdtgroup.
reset_all_ctrls() does not use resctrl_arch_get_num_closid(), even
though it sets up a structure for modifying the hardware. This function
will be part of the architecture code, the maximum closid should be the
maximum value the hardware has, regardless of the way resctrl is using
it. All the uses of num_closid in core.c are naturally part of the
architecture specific code.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-9-james.morse@arm.com
Struct resctrl_schema holds properties that vary with the style of
configuration that resctrl applies to a resource. There are already
two values for the hardware's num_closid, depending on whether the
architecture presents the L3 or L3CODE/L3DATA resources.
As the way CDP changes the number of control groups that resctrl can
create is part of the user-space interface, it should be managed by the
filesystem parts of resctrl. This allows the architecture code to only
describe the value the hardware supports.
Add num_closid to resctrl_schema. This is the value seen by the
filesystem, which may be different to the maximum value described by the
arch code when CDP is enabled.
These functions operate on the num_closid value that is exposed to
user-space:
* rdtgroup_parse_resource()
* rdtgroup_schemata_show()
* rdt_num_closids_show()
* closid_init()
Change them to use the schema value instead. schemata_list_create() sets
this value, and reaches into the architecture-specific structure to get
the value. This will eventually be replaced with a helper.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-8-james.morse@arm.com
When parsing a schema configuration value from user-space, resctrl walks
the architectures rdt_resources_all[] array to find a matching struct
rdt_resource.
Once the CDP resources are merged there will be one resource in use
by two schemata. Anything walking rdt_resources_all[] on behalf of a
user-space request should walk the list of struct resctrl_schema
instead.
Change the users of for_each_alloc_enabled_rdt_resource() to walk the
schema instead. Schemata were only created for alloc_enabled resources
so these two lists are currently equivalent.
schemata_list_create() and rdt_kill_sb() are ignored. The first
creates the schema list, and will eventually loop over the resource
indexes using an arch helper to retrieve the resource. rdt_kill_sb()
will eventually make use of an arch 'reset everything' helper.
After the filesystem code is moved, rdtgroup_pseudo_locked_in_hierarchy()
remains part of the x86 specific hooks to support pseudo lock. This
code walks each domain, and still does this after the separate resources
are merged.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-7-james.morse@arm.com
The names of resources are used for the schema name presented to
user-space. The name used is rooted in a structure provided by the
architecture code because the names are different when CDP is enabled.
x86 implements this by swapping between two sets of resource structures
based on their alloc_enabled flag. The type of configuration in-use is
encoded in the name (and cbm_idx_offset).
Once the CDP behaviour is moved into the parts of resctrl that will
move to /fs/, there will be two struct resctrl_schema for one struct
rdt_resource. The schema describes the type of configuration being
applied to the resource. The name of the schema should be generated
by resctrl, base on the type of configuration. To do this struct
resctrl_schema needs to store the type of configuration in use for a
schema.
Create an enum resctrl_conf_type describing the options, and add it to
struct resctrl_schema. The underlying resources are still separate, as
cbm_idx_offset is still in use.
Temporarily label all the entries in rdt_resources_all[] and copy that
value to struct resctrl_schema. Copying the value ensures there is no
mismatch while the filesystem parts of resctrl are modified to use the
schema. Once the resources are merged, the filesystem code can assign
this value based on the schema being created.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-6-james.morse@arm.com
Many of resctrl's per-schema files return a value from struct
rdt_resource, which they take as their 'priv' pointer.
Moving properties that resctrl exposes to user-space into the core 'fs'
code, (e.g. the name of the schema), means some of the functions that
back the filesystem need the schema struct (to where the properties are
moved), but currently take struct rdt_resource. For example, once the
CDP resources are merged, struct rdt_resource no longer reflects all the
properties of the schema.
For the info dirs that represent a control, the information needed
will be accessed via struct resctrl_schema, as this is how the resource
is being used. For the monitors, its still struct rdt_resource as the
monitors aren't described as schema.
This difference means the type of the private pointers varies between
control and monitor info dirs.
Change the 'priv' pointer to point to struct resctrl_schema for
the per-schema files that represent a control. The type can be
determined from the fflags field. If the flags are RF_MON_INFO, its
a struct rdt_resource. If the flags are RF_CTRL_INFO, its a struct
resctrl_schema. No entry in res_common_files[] has both flags.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-5-james.morse@arm.com
Resctrl exposes schemata to user-space, which allow the control values
to be specified for a group of tasks.
User-visible properties of the interface, (such as the schemata names
and how the values are parsed) are rooted in a struct provided by the
architecture code. (struct rdt_hw_resource). Once a second architecture
uses resctrl, this would allow user-visible properties to diverge
between architectures.
These properties should come from the resctrl code that will be common
to all architectures. Resctrl has no per-schema structure, only struct
rdt_{hw_,}resource. Create a struct resctrl_schema to hold the
rdt_resource. Before a second architecture can be supported, this
structure will also need to hold the schema name visible to user-space
and the type of configuration values for resctrl.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-4-james.morse@arm.com
resctrl is the defacto Linux ABI for SoC resource partitioning features.
To support it on another architecture, it needs to be abstracted from
the features provided by Intel RDT and AMD PQoS, and moved to /fs/.
struct rdt_domain contains a mix of architecture private details and
properties of the filesystem interface user-space uses.
Continue by splitting struct rdt_domain, into an architecture private
'hw' struct, which contains the common resctrl structure that would be
used by any architecture. The hardware values in ctrl_val and mbps_val
need to be accessed via helpers to allow another architecture to convert
these into a different format if necessary. After this split, filesystem
code paths touching a 'hw' struct indicates where an abstraction is
needed.
Splitting this structure only moves types around, and should not lead
to any change in behaviour.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-3-james.morse@arm.com
resctrl is the defacto Linux ABI for SoC resource partitioning features.
To support it on another architecture, it needs to be abstracted from
the features provided by Intel RDT and AMD PQoS, and moved to /fs/.
struct rdt_resource contains a mix of architecture private details
and properties of the filesystem interface user-space uses.
Start by splitting struct rdt_resource, into an architecture private
'hw' struct, which contains the common resctrl structure that would be
used by any architecture. The foreach helpers are most commonly used by
the filesystem code, and should return the common resctrl structure.
for_each_rdt_resource() is changed to walk the common structure in its
parent arch private structure.
Move as much of the structure as possible into the common structure
in the core code's header file. The x86 hardware accessors remain
part of the architecture private code, as do num_closid, mon_scale
and mbm_width.
mon_scale and mbm_width are used to detect overflow of the hardware
counters, and convert them from their native size to bytes. Any
cross-architecture abstraction should be in terms of bytes, making
these properties private.
The hardware's num_closid is kept in the private structure to force the
filesystem code to use a helper to access it. MPAM would return a single
value for the system, regardless of the resource. Using the helper
prevents this field from being confused with the version of num_closid
that is being exposed to user-space (added in a later patch).
After this split, filesystem code touching a 'hw' struct indicates
where an abstraction is needed.
Splitting this structure only moves types around, and should not lead
to any change in behaviour.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-2-james.morse@arm.com
Fix another ~42 single-word typos in arch/x86/ code comments,
missed a few in the first pass, in particular in .S files.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-kernel@vger.kernel.org
Fix ~144 single-word typos in arch/x86/ code comments.
Doing this in a single commit should reduce the churn.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-kernel@vger.kernel.org
A CPU's current task can have its {closid, rmid} fields read locally
while they are being concurrently written to from another CPU.
This can happen anytime __resctrl_sched_in() races with either
__rdtgroup_move_task() or rdt_move_group_tasks().
Prevent load / store tearing for those accesses by giving them the
READ_ONCE() / WRITE_ONCE() treatment.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/9921fda88ad81afb9885b517fbe864a2bc7c35a9.1608243147.git.reinette.chatre@intel.com
James reported in [1] that there could be two tasks running on the same CPU
with task_struct->on_cpu set. Using task_struct->on_cpu as a test if a task
is running on a CPU may thus match the old task for a CPU while the
scheduler is running and IPI it unnecessarily.
task_curr() is the correct helper to use. While doing so move the #ifdef
check of the CONFIG_SMP symbol to be a C conditional used to determine
if this helper should be used to ensure the code is always checked for
correctness by the compiler.
[1] https://lore.kernel.org/lkml/a782d2f3-d2f6-795f-f4b1-9462205fd581@arm.com
Reported-by: James Morse <james.morse@arm.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/e9e68ce1441a73401e08b641cc3b9a3cf13fe6d4.1608243147.git.reinette.chatre@intel.com
Currently, when moving a task to a resource group the PQR_ASSOC MSR is
updated with the new closid and rmid in an added task callback. If the
task is running, the work is run as soon as possible. If the task is not
running, the work is executed later in the kernel exit path when the
kernel returns to the task again.
Updating the PQR_ASSOC MSR as soon as possible on the CPU a moved task
is running is the right thing to do. Queueing work for a task that is
not running is unnecessary (the PQR_ASSOC MSR is already updated when
the task is scheduled in) and causing system resource waste with the way
in which it is implemented: Work to update the PQR_ASSOC register is
queued every time the user writes a task id to the "tasks" file, even if
the task already belongs to the resource group.
This could result in multiple pending work items associated with a
single task even if they are all identical and even though only a single
update with most recent values is needed. Specifically, even if a task
is moved between different resource groups while it is sleeping then it
is only the last move that is relevant but yet a work item is queued
during each move.
This unnecessary queueing of work items could result in significant
system resource waste, especially on tasks sleeping for a long time.
For example, as demonstrated by Shakeel Butt in [1] writing the same
task id to the "tasks" file can quickly consume significant memory. The
same problem (wasted system resources) occurs when moving a task between
different resource groups.
As pointed out by Valentin Schneider in [2] there is an additional issue
with the way in which the queueing of work is done in that the task_struct
update is currently done after the work is queued, resulting in a race with
the register update possibly done before the data needed by the update is
available.
To solve these issues, update the PQR_ASSOC MSR in a synchronous way
right after the new closid and rmid are ready during the task movement,
only if the task is running. If a moved task is not running nothing
is done since the PQR_ASSOC MSR will be updated next time the task is
scheduled. This is the same way used to update the register when tasks
are moved as part of resource group removal.
[1] https://lore.kernel.org/lkml/CALvZod7E9zzHwenzf7objzGKsdBmVwTgEJ0nPgs0LUFU3SN5Pw@mail.gmail.com/
[2] https://lore.kernel.org/lkml/20201123022433.17905-1-valentin.schneider@arm.com
[ bp: Massage commit message and drop the two update_task_closid_rmid()
variants. ]
Fixes: e02737d5b8 ("x86/intel_rdt: Add tasks files")
Reported-by: Shakeel Butt <shakeelb@google.com>
Reported-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: James Morse <james.morse@arm.com>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/17aa2fb38fc12ce7bb710106b3e7c7b45acb9e94.1608243147.git.reinette.chatre@intel.com
(Fenghua Yu)
- Cleanups.
-----BEGIN PGP SIGNATURE-----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=9Lsd
-----END PGP SIGNATURE-----
Merge tag 'x86_cache_for_v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cache resource control updates from Borislav Petkov:
- add logic to correct MBM total and local values fixing errata SKX99
and BDF102 (Fenghua Yu)
- cleanups
* tag 'x86_cache_for_v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/resctrl: Clean up unused function parameter in rmdir path
x86/resctrl: Constify kernfs_ops
x86/resctrl: Correct MBM total and local values
Documentation/x86: Rename resctrl_ui.rst and add two errata to the file
Commit
fd8d9db355 ("x86/resctrl: Remove superfluous kernfs_get() calls to prevent refcount leak")
removed superfluous kernfs_get() calls in rdtgroup_ctrl_remove() and
rdtgroup_rmdir_ctrl(). That change resulted in an unused function
parameter to these two functions.
Clean up the unused function parameter in rdtgroup_ctrl_remove(),
rdtgroup_rmdir_mon() and their callers rdtgroup_rmdir_ctrl() and
rdtgroup_rmdir().
Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lkml.kernel.org/r/1606759618-13181-1-git-send-email-xiaochen.shen@intel.com
When the AMD QoS feature CDP (code and data prioritization) is enabled
or disabled, the CDP bit in MSR 0000_0C81 is written on one of the CPUs
in an L3 domain (core complex). That is not correct - the CDP bit needs
to be updated on all the logical CPUs in the domain.
This was not spelled out clearly in the spec earlier. The specification
has been updated and the updated document, "AMD64 Technology Platform
Quality of Service Extensions Publication # 56375 Revision: 1.02 Issue
Date: October 2020" is available now. Refer the section: Code and Data
Prioritization.
Fix the issue by adding a new flag arch_has_per_cpu_cfg in rdt_cache
data structure.
The documentation can be obtained at:
https://developer.amd.com/wp-content/resources/56375.pdf
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206537
[ bp: Massage commit message. ]
Fixes: 4d05bf71f1 ("x86/resctrl: Introduce AMD QOS feature")
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lkml.kernel.org/r/160675180380.15628.3309402017215002347.stgit@bmoger-ubuntu
On resource group creation via a mkdir an extra kernfs_node reference is
obtained by kernfs_get() to ensure that the rdtgroup structure remains
accessible for the rdtgroup_kn_unlock() calls where it is removed on
deletion. Currently the extra kernfs_node reference count is only
dropped by kernfs_put() in rdtgroup_kn_unlock() while the rdtgroup
structure is removed in a few other locations that lack the matching
reference drop.
In call paths of rmdir and umount, when a control group is removed,
kernfs_remove() is called to remove the whole kernfs nodes tree of the
control group (including the kernfs nodes trees of all child monitoring
groups), and then rdtgroup structure is freed by kfree(). The rdtgroup
structures of all child monitoring groups under the control group are
freed by kfree() in free_all_child_rdtgrp().
Before calling kfree() to free the rdtgroup structures, the kernfs node
of the control group itself as well as the kernfs nodes of all child
monitoring groups still take the extra references which will never be
dropped to 0 and the kernfs nodes will never be freed. It leads to
reference count leak and kernfs_node_cache memory leak.
For example, reference count leak is observed in these two cases:
(1) mount -t resctrl resctrl /sys/fs/resctrl
mkdir /sys/fs/resctrl/c1
mkdir /sys/fs/resctrl/c1/mon_groups/m1
umount /sys/fs/resctrl
(2) mkdir /sys/fs/resctrl/c1
mkdir /sys/fs/resctrl/c1/mon_groups/m1
rmdir /sys/fs/resctrl/c1
The same reference count leak issue also exists in the error exit paths
of mkdir in mkdir_rdt_prepare() and rdtgroup_mkdir_ctrl_mon().
Fix this issue by following changes to make sure the extra kernfs_node
reference on rdtgroup is dropped before freeing the rdtgroup structure.
(1) Introduce rdtgroup removal helper rdtgroup_remove() to wrap up
kernfs_put() and kfree().
(2) Call rdtgroup_remove() in rdtgroup removal path where the rdtgroup
structure is about to be freed by kfree().
(3) Call rdtgroup_remove() or kernfs_put() as appropriate in the error
exit paths of mkdir where an extra reference is taken by kernfs_get().
Fixes: f3cbeacaa0 ("x86/intel_rdt/cqm: Add rmdir support")
Fixes: e02737d5b8 ("x86/intel_rdt: Add tasks files")
Fixes: 60cf5e101f ("x86/intel_rdt: Add mkdir to resctrl file system")
Reported-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1604085088-31707-1-git-send-email-xiaochen.shen@intel.com
