The CPUID(0x2) descriptors iterator has been renamed from:
for_each_leaf_0x2_entry()
to:
for_each_cpuid_0x2_desc()
since it iterates over CPUID(0x2) cache and TLB "descriptors", not
"entries".
In the macro's x86/cpu call-site, rename the parameter denoting the
parsed descriptor at each iteration from 'entry' to 'desc'.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: x86-cpuid@lists.linux.dev
Link: https://lore.kernel.org/r/20250508150240.172915-8-darwi@linutronix.de
Rename the CPUID(0x2) register accessor function:
cpuid_get_leaf_0x2_regs(regs)
to:
cpuid_leaf_0x2(regs)
for consistency with other <cpuid/api.h> accessors that return full CPUID
registers outputs like:
cpuid_leaf(regs)
cpuid_subleaf(regs)
In the same vein, rename the CPUID(0x2) iteration macro:
for_each_leaf_0x2_entry()
to:
for_each_cpuid_0x2_desc()
to include "cpuid" in the macro name, and since what is iterated upon is
CPUID(0x2) cache and TLB "descriptos", not "entries". Prefix an
underscore to that iterator macro parameters, so that the newly renamed
'desc' parameter do not get mixed with "union leaf_0x2_regs :: desc[]" in
the macro's implementation.
Adjust all the affected call-sites accordingly.
While at it, use "CPUID(0x2)" instead of "CPUID leaf 0x2" as this is the
recommended style.
No change in functionality intended.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: x86-cpuid@lists.linux.dev
Link: https://lore.kernel.org/r/20250508150240.172915-6-darwi@linutronix.de
The main CPUID header <asm/cpuid.h> was originally a storefront for the
headers:
<asm/cpuid/api.h>
<asm/cpuid/leaf_0x2_api.h>
Now that the latter CPUID(0x2) header has been merged into the former,
there is no practical difference between <asm/cpuid.h> and
<asm/cpuid/api.h>.
Migrate all users to the <asm/cpuid/api.h> header, in preparation of
the removal of <asm/cpuid.h>.
Don't remove <asm/cpuid.h> just yet, in case some new code in -next
started using it.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: x86-cpuid@lists.linux.dev
Link: https://lore.kernel.org/r/20250508150240.172915-3-darwi@linutronix.de
Another set of improvements to the kernel's CRC (cyclic redundancy
check) code:
- Rework the CRC64 library functions to be directly optimized, like what
I did last cycle for the CRC32 and CRC-T10DIF library functions.
- Rewrite the x86 PCLMULQDQ-optimized CRC code, and add VPCLMULQDQ
support and acceleration for crc64_be and crc64_nvme.
- Rewrite the riscv Zbc-optimized CRC code, and add acceleration for
crc_t10dif, crc64_be, and crc64_nvme.
- Remove crc_t10dif and crc64_rocksoft from the crypto API, since they
are no longer needed there.
- Rename crc64_rocksoft to crc64_nvme, as the old name was incorrect.
- Add kunit test cases for crc64_nvme and crc7.
- Eliminate redundant functions for calculating the Castagnoli CRC32,
settling on just crc32c().
- Remove unnecessary prompts from some of the CRC kconfig options.
- Further optimize the x86 crc32c code.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCZ+CGGhQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOK3wRAP4tbnzawUmlIHIF0hleoADXehUgAhMt
NZn15mGvyiuwIQEA8W9qvnLdFXZkdxhxAEvDDFjyrRauL6eGtr/GvCx4AQY=
=wmKG
-----END PGP SIGNATURE-----
Merge tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull CRC updates from Eric Biggers:
"Another set of improvements to the kernel's CRC (cyclic redundancy
check) code:
- Rework the CRC64 library functions to be directly optimized, like
what I did last cycle for the CRC32 and CRC-T10DIF library
functions
- Rewrite the x86 PCLMULQDQ-optimized CRC code, and add VPCLMULQDQ
support and acceleration for crc64_be and crc64_nvme
- Rewrite the riscv Zbc-optimized CRC code, and add acceleration for
crc_t10dif, crc64_be, and crc64_nvme
- Remove crc_t10dif and crc64_rocksoft from the crypto API, since
they are no longer needed there
- Rename crc64_rocksoft to crc64_nvme, as the old name was incorrect
- Add kunit test cases for crc64_nvme and crc7
- Eliminate redundant functions for calculating the Castagnoli CRC32,
settling on just crc32c()
- Remove unnecessary prompts from some of the CRC kconfig options
- Further optimize the x86 crc32c code"
* tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (36 commits)
x86/crc: drop the avx10_256 functions and rename avx10_512 to avx512
lib/crc: remove unnecessary prompt for CONFIG_CRC64
lib/crc: remove unnecessary prompt for CONFIG_LIBCRC32C
lib/crc: remove unnecessary prompt for CONFIG_CRC8
lib/crc: remove unnecessary prompt for CONFIG_CRC7
lib/crc: remove unnecessary prompt for CONFIG_CRC4
lib/crc7: unexport crc7_be_syndrome_table
lib/crc_kunit.c: update comment in crc_benchmark()
lib/crc_kunit.c: add test and benchmark for crc7_be()
x86/crc32: optimize tail handling for crc32c short inputs
riscv/crc64: add Zbc optimized CRC64 functions
riscv/crc-t10dif: add Zbc optimized CRC-T10DIF function
riscv/crc32: reimplement the CRC32 functions using new template
riscv/crc: add "template" for Zbc optimized CRC functions
x86/crc: add ANNOTATE_NOENDBR to suppress objtool warnings
x86/crc32: improve crc32c_arch() code generation with clang
x86/crc64: implement crc64_be and crc64_nvme using new template
x86/crc-t10dif: implement crc_t10dif using new template
x86/crc32: implement crc32_le using new template
x86/crc: add "template" for [V]PCLMULQDQ based CRC functions
...
CPUID leaf 0x2 output is a stream of one-byte descriptors, each implying
certain details about the CPU's cache and TLB entries.
At previous commits, the mapping tables for such descriptors were merged
into one consolidated table. The mapping was also transformed into a
hash lookup instead of a loop-based lookup for each descriptor.
Use the new consolidated table and its hash-based lookup through the
for_each_leaf_0x2_tlb_entry() accessor.
Remove the TLB-specific mapping, intel_tlb_table[], as it is now no
longer used. Remove the <cpuid/types.h> macro, for_each_leaf_0x2_desc(),
since the converted code was its last user.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250324133324.23458-23-darwi@linutronix.de
The leaf 0x2 one-byte TLB descriptor types:
TLB_INST_4K
TLB_INST_4M
TLB_INST_2M_4M
...
are just discriminators to be used within the intel_tlb_table[] mapping.
Their specific values are irrelevant.
Use enums for such types.
Make the enum packed and static assert that its values remain within a
single byte so that the intel_tlb_table[] size do not go out of hand.
Use a __CHECKER__ guard for the static_assert(sizeof(enum) == 1) line as
sparse ignores the __packed annotation on enums.
This is similar to:
fe3944fb24 ("fs: Move enum rw_hint into a new header file")
for the core SCSI code.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/Z9rsTirs9lLfEPD9@lx-t490
Link: https://lore.kernel.org/r/20250324133324.23458-20-darwi@linutronix.de
Introduce CPUID leaf 0x2 parsing helpers at <asm/cpuid/leaf_0x2_api.h>.
This allows sharing the leaf 0x2's output validation and iteration logic
across both x86/cpu intel.c and cacheinfo.c.
Start by converting intel.c to the new API.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250324133324.23458-4-darwi@linutronix.de
Leaf 0x2 output includes a "query count" byte where it was supposed to
specify the number of repeated CPUID leaf 0x2 subleaf 0 queries needed to
extract all of the CPU's cache and TLB descriptors.
Per current Intel manuals, all CPUs supporting this leaf "will always"
return an iteration count of 1.
Remove the leaf 0x2 query loop and just query the hardware once.
Note, as previously done in:
aec28d852ed2 ("x86/cpuid: Standardize on u32 in <asm/cpuid/api.h>")
standardize on using 'u32' and 'u8' types.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250324133324.23458-2-darwi@linutronix.de
X86_FEATURE_CONSTANT_TSC is a Linux-defined, synthesized feature flag.
It is used across several vendors. Intel CPUs will set the feature when
the architectural CPUID.80000007.EDX[1] bit is set. There are also some
Intel CPUs that have the X86_FEATURE_CONSTANT_TSC behavior but don't
enumerate it with the architectural bit. Those currently have a model
range check.
Today, virtually all of the CPUs that have the CPUID bit *also* match
the "model >= 0x0e" check. This is confusing. Instead of an open-ended
check, pick some models (INTEL_IVYBRIDGE and P4_WILLAMETTE) as the end
of goofy CPUs that should enumerate the bit but don't. These models are
relatively arbitrary but conservative pick for this.
This makes it obvious that later CPUs (like Family 18+) no longer need
to synthesize X86_FEATURE_CONSTANT_TSC.
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20250219184133.816753-14-sohil.mehta@intel.com
X86_FEATURE_REP_GOOD is a linux defined feature flag to track whether
fast string operations should be used for copy_page(). It is also used
as a second alternative for clear_page() if enhanced fast string
operations (ERMS) are not available.
X86_FEATURE_ERMS is an Intel-specific hardware-defined feature flag that
tracks hardware support for Enhanced Fast strings. It is used to track
whether Fast strings should be used for similar memory copy and memory
clearing operations.
On top of these, there is a FAST_STRING enable bit in the
IA32_MISC_ENABLE MSR. It is typically controlled by the BIOS to provide
a hint to the hardware and the OS on whether fast string operations are
preferred.
Commit:
161ec53c70 ("x86, mem, intel: Initialize Enhanced REP MOVSB/STOSB")
introduced a mechanism to honor the BIOS preference for fast string
operations and clear the above feature flags if needed.
Unfortunately, the current initialization code for Intel to set and
clear these bits is confusing at best and likely incorrect.
X86_FEATURE_REP_GOOD is cleared in early_init_intel() if
MISC_ENABLE.FAST_STRING is 0. But it gets set later on unconditionally
for all Family 6 processors in init_intel(). This not only overrides the
BIOS preference but also contradicts the earlier check.
Fix this by combining the related checks and always relying on the BIOS
provided preference for fast string operations. This simplification
makes sure the upcoming Intel Family 18 and 19 models are covered as
well.
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250219184133.816753-12-sohil.mehta@intel.com
Introduce names for some Family 5 models and convert some of the checks
to be VFM based.
Also, to keep the file sorted by family, move Family 5 to the top of the
header file.
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/20250219184133.816753-8-sohil.mehta@intel.com
Introduce names for some old pentium 4 models and replace the x86_model
checks with VFM ones.
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/20250219184133.816753-7-sohil.mehta@intel.com
Introduce names for some old pentium models and replace the x86_model
checks with VFM ones.
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/20250219184133.816753-6-sohil.mehta@intel.com
The alignment preference for 32-bit MOVSL based bulk memory move has
been 8-byte for a long time. However this preference is only set for
Family 6 and 15 processors.
Use the same preference for upcoming Family numbers 18 and 19. Also, use
a simpler VFM based check instead of switching based on Family numbers.
Refresh the comment to reflect the new check.
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250219184133.816753-3-sohil.mehta@intel.com
Commit:
e0ba94f14f ("x86/tlb_info: get last level TLB entry number of CPU")
added the TLB table for parsing CPUID(0x4), including strings
describing them. The string entry in the table was never used.
Convert them to comments.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250304085152.51092-10-darwi@linutronix.de
Commit:
e0ba94f14f ("x86/tlb_info: get last level TLB entry number of CPU")
introduced u16 "info" arrays for each TLB type.
Since 2012 and each array stores just one type of information: the
number of TLB entries for its respective TLB type.
Replace such arrays with simple variables.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250304085152.51092-8-darwi@linutronix.de
The conditional statement "if (x < y) { x = y; }" appears 22 times at
the Intel leaf 0x2 descriptors parsing logic.
Replace each of such instances with a max() expression to simplify
the code.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250304085152.51092-7-darwi@linutronix.de
Remove the headers at intel.c that are no longer required.
Alphabetically reorder what remains since more headers will be included
in further commits.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250304085152.51092-6-darwi@linutronix.de
CPUID leaf 0x2's one-byte TLB descriptors report the number of entries
for specific TLB types, among other properties.
Typically, each emitted descriptor implies the same number of entries
for its respective TLB type(s). An emitted 0x63 descriptor is an
exception: it implies 4 data TLB entries for 1GB pages and 32 data TLB
entries for 2MB or 4MB pages.
For the TLB descriptors parsing code, the entry count for 1GB pages is
encoded at the intel_tlb_table[] mapping, but the 2MB/4MB entry count is
totally ignored.
Update leaf 0x2's parsing logic 0x2 to account for 32 data TLB entries
for 2MB/4MB pages implied by the 0x63 descriptor.
Fixes: e0ba94f14f ("x86/tlb_info: get last level TLB entry number of CPU")
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250304085152.51092-4-darwi@linutronix.de
CPUID leaf 0x2 emits one-byte descriptors in its four output registers
EAX, EBX, ECX, and EDX. For these descriptors to be valid, the most
significant bit (MSB) of each register must be clear.
Leaf 0x2 parsing at intel.c only validated the MSBs of EAX, EBX, and
ECX, but left EDX unchecked.
Validate EDX's most-significant bit as well.
Fixes: e0ba94f14f ("x86/tlb_info: get last level TLB entry number of CPU")
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250304085152.51092-3-darwi@linutronix.de
Because calls to get_this_hybrid_cpu_type() and
get_this_hybrid_cpu_native_id() are not required now. cpu-type and
native-model-id are cached at boot in per-cpu struct cpuinfo_topology.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/20241211-add-cpu-type-v5-4-2ae010f50370@linux.intel.com
Lift zmm_exclusion_list in aesni-intel_glue.c into the x86 CPU setup
code, and add a new x86 CPU feature flag X86_FEATURE_PREFER_YMM that is
set when the CPU is on this list.
This allows other code in arch/x86/, such as the CRC library code, to
apply the same exclusion list when deciding whether to execute 256-bit
or 512-bit optimized functions.
Note that full AVX512 support including ZMM registers is still exposed
to userspace and is still supported for in-kernel use. This flag just
indicates whether in-kernel code should prefer to use YMM registers.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20250210174540.161705-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
use the generic struct x86_cpu_id thing
- Remove magic naked numbers for CPUID functions and use proper defines of the
prefix CPUID_LEAF_*. Consolidate some of the crazy use around the tree
- Smaller cleanups and improvements
-----BEGIN PGP SIGNATURE-----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=9Hdg
-----END PGP SIGNATURE-----
Merge tag 'x86_cpu_for_v6.14_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpuid updates from Borislav Petkov:
- Remove the less generic CPU matching infra around struct x86_cpu_desc
and use the generic struct x86_cpu_id thing
- Remove magic naked numbers for CPUID functions and use proper defines
of the prefix CPUID_LEAF_*. Consolidate some of the crazy use around
the tree
- Smaller cleanups and improvements
* tag 'x86_cpu_for_v6.14_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Make all all CPUID leaf names consistent
x86/fpu: Remove unnecessary CPUID level check
x86/fpu: Move CPUID leaf definitions to common code
x86/tsc: Remove CPUID "frequency" leaf magic numbers.
x86/tsc: Move away from TSC leaf magic numbers
x86/cpu: Move TSC CPUID leaf definition
x86/cpu: Refresh DCA leaf reading code
x86/cpu: Remove unnecessary MwAIT leaf checks
x86/cpu: Use MWAIT leaf definition
x86/cpu: Move MWAIT leaf definition to common header
x86/cpu: Remove 'x86_cpu_desc' infrastructure
x86/cpu: Move AMD erratum 1386 table over to 'x86_cpu_id'
x86/cpu: Replace PEBS use of 'x86_cpu_desc' use with 'x86_cpu_id'
x86/cpu: Expose only stepping min/max interface
x86/cpu: Introduce new microcode matching helper
x86/cpufeature: Document cpu_feature_enabled() as the default to use
x86/paravirt: Remove the WBINVD callback
x86/cpufeatures: Free up unused feature bits
Linux defined feature bits X86_FEATURE_P3 and X86_FEATURE_P4 are not
used anywhere. Commit f31d731e44 ("x86: use X86_FEATURE_NOPL in
alternatives") got rid of the last usage in 2008. Remove the related
mappings and code.
Just like all X86_FEATURE bits, the raw bit numbers can be exposed to
userspace via MODULE_DEVICE_TABLE(). There is a very small theoretical
chance of userspace getting confused if these bits got reassigned and
changed logical meaning. But these bits were never used for a device
table, so it's highly unlikely this will ever happen in practice.
[ dhansen: clarify userspace visibility of these bits ]
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/all/20241107233000.2742619-1-sohil.mehta%40intel.com
Under some conditions, MONITOR wakeups on Lunar Lake processors
can be lost, resulting in significant user-visible delays.
Add Lunar Lake to X86_BUG_MONITOR so that wake_up_idle_cpu()
always sends an IPI, avoiding this potential delay.
Reported originally here:
https://bugzilla.kernel.org/show_bug.cgi?id=219364
[ dhansen: tweak subject ]
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/a4aa8842a3c3bfdb7fe9807710eef159cbf0e705.1731463305.git.len.brown%40intel.com
- Move Split and Bus lock code to a dedicated file (Ravi Bangoria)
- Add split/bus lock support for AMD (Ravi Bangoria)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=QpKp
-----END PGP SIGNATURE-----
Merge tag 'x86-splitlock-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 splitlock updates from Ingo Molnar:
- Move Split and Bus lock code to a dedicated file (Ravi Bangoria)
- Add split/bus lock support for AMD (Ravi Bangoria)
* tag 'x86-splitlock-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bus_lock: Add support for AMD
x86/split_lock: Move Split and Bus lock code to a dedicated file
Define helper get_this_hybrid_cpu_native_id() to return the CPU core
native ID. This core native ID combining with core type can be used to
figure out the CPU core uarch uniquely.
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Link: https://lkml.kernel.org/r/20240820073853.1974746-3-dapeng1.mi@linux.intel.com
There's an erratum that prevents the PAT from working correctly:
https://www.intel.com/content/dam/www/public/us/en/documents/specification-updates/pentium-dual-core-specification-update.pdf
# Document 316515 Version 010
The kernel currently disables PAT support on those CPUs, but it
does it with some magic numbers.
Replace the magic numbers with the new "IFM" macros.
Make the check refer to the last affected CPU (INTEL_CORE_YONAH)
rather than the first fixed one. This makes it easier to find the
documentation of the erratum since Intel documents where it is
broken and not where it is fixed.
I don't think the Pentium Pro (or Pentium II) is actually affected.
But the old check included them, so it can't hurt to keep doing the
same. I'm also not completely sure about the "Pentium M" CPUs
(models 0x9 and 0xd). But, again, they were included in in the
old checks and were close Pentium III derivatives, so are likely
affected.
While we're at it, revise the comment referring to the erratum name
and making sure it is a quote of the language from the actual errata
doc. That should make it easier to find in the future when the URL
inevitably changes.
Why bother with this in the first place? It actually gets rid of one
of the very few remaining direct references to c->x86{,_model}.
No change in functionality intended.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Len Brown <len.brown@intel.com>
Link: https://lore.kernel.org/r/20240829220042.1007820-1-dave.hansen@linux.intel.com
Add Bus Lock Detect (called Bus Lock Trap in AMD docs) support for AMD
platforms. Bus Lock Detect is enumerated with CPUID Fn0000_0007_ECX_x0
bit [24 / BUSLOCKTRAP]. It can be enabled through MSR_IA32_DEBUGCTLMSR.
When enabled, hardware clears DR6[11] and raises a #DB exception on
occurrence of Bus Lock if CPL > 0. More detail about the feature can be
found in AMD APM[1].
[1]: AMD64 Architecture Programmer's Manual Pub. 40332, Rev. 4.07 - June
2023, Vol 2, 13.1.3.6 Bus Lock Trap
https://bugzilla.kernel.org/attachment.cgi?id=304653
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/all/20240808062937.1149-3-ravi.bangoria@amd.com
Bus Lock Detect functionality on AMD platforms works identical to Intel.
Move split_lock and bus_lock specific code from intel.c to a dedicated
file so that it can be compiled and supported on non-Intel platforms.
Also, introduce CONFIG_X86_BUS_LOCK_DETECT, make it dependent on
CONFIG_CPU_SUP_INTEL and add compilation dependency of the new bus_lock.c
file on CONFIG_X86_BUS_LOCK_DETECT.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/all/20240808062937.1149-2-ravi.bangoria@amd.com
explicitly specify the flag if there's a valid reason to show it in
/proc/cpuinfo
- Switch a bunch of Intel x86 model checking code to the new CPU model
defines
- Fixes and cleanups
-----BEGIN PGP SIGNATURE-----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=SEED
-----END PGP SIGNATURE-----
Merge tag 'x86_cpu_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpu model updates from Borislav Petkov:
- Flip the logic to add feature names to /proc/cpuinfo to having to
explicitly specify the flag if there's a valid reason to show it in
/proc/cpuinfo
- Switch a bunch of Intel x86 model checking code to the new CPU model
defines
- Fixes and cleanups
* tag 'x86_cpu_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu/intel: Drop stray FAM6 check with new Intel CPU model defines
x86/cpufeatures: Flip the /proc/cpuinfo appearance logic
x86/CPU/AMD: Always inline amd_clear_divider()
x86/mce/inject: Add missing MODULE_DESCRIPTION() line
perf/x86/rapl: Switch to new Intel CPU model defines
x86/boot: Switch to new Intel CPU model defines
x86/cpu: Switch to new Intel CPU model defines
perf/x86/intel: Switch to new Intel CPU model defines
x86/virt/tdx: Switch to new Intel CPU model defines
x86/PCI: Switch to new Intel CPU model defines
x86/cpu/intel: Switch to new Intel CPU model defines
x86/platform/intel-mid: Switch to new Intel CPU model defines
x86/pconfig: Remove unused MKTME pconfig code
x86/cpu: Remove useless work in detect_tme_early()
The outer if () should have been dropped when switching to c->x86_vfm.
Fixes: 6568fc18c2 ("x86/cpu/intel: Switch to new Intel CPU model defines")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20240529183605.17520-1-andrew.cooper3@citrix.com
Intel CPUs have a MSR bit to limit CPUID enumeration to leaf two. If
this bit is set by the BIOS then CPUID evaluation including topology
enumeration does not work correctly as the evaluation code does not try
to analyze any leaf greater than two.
This went unnoticed before because the original topology code just
repeated evaluation several times and managed to overwrite the initial
limited information with the correct one later. The new evaluation code
does it once and therefore ends up with the limited and wrong
information.
Cure this by unlocking CPUID right before evaluating anything which
depends on the maximum CPUID leaf being greater than two instead of
rereading stuff after unlock.
Fixes: 22d63660c3 ("x86/cpu: Use common topology code for Intel")
Reported-by: Peter Schneider <pschneider1968@googlemail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Peter Schneider <pschneider1968@googlemail.com>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/fd3f73dc-a86f-4bcf-9c60-43556a21eb42@googlemail.com
TME (Total Memory Encryption) and MKTME (Multi-Key Total Memory
Encryption) BIOS detection were introduced together here [1] and
are loosely coupled in the Intel CPU init code.
TME is a hardware only feature and its BIOS status is all that needs
to be shared with the kernel user: enabled or disabled. The TME
algorithm the BIOS is using and whether or not the kernel recognizes
that algorithm is useless to the kernel user.
MKTME is a hardware feature that requires kernel support. MKTME
detection code was added in advance of broader kernel support for
MKTME that never followed. So, rather than continuing to spew
needless and confusing messages about BIOS MKTME status, remove
most of the MKTME pieces from detect_tme_early().
Keep one useful message: alert the user when BIOS enabled MKTME
reduces the available physical address bits. Recovery of the MKTME
consumed bits requires a reboot with MKTME disabled in BIOS.
There is no functional change for the user, only a change in boot
messages. Below is one example when both TME and MKTME are enabled
in BIOS with AES_XTS_256 which is unknown to the detect tme code.
Before:
[] x86/tme: enabled by BIOS
[] x86/tme: Unknown policy is active: 0x2
[] x86/mktme: No known encryption algorithm is supported: 0x4
[] x86/mktme: enabled by BIOS
[] x86/mktme: 127 KeyIDs available
After:
[] x86/tme: enabled by BIOS
[] x86/mktme: BIOS enable: x86_phys_bits reduced by 8
[1]
commit cb06d8e3d0 ("x86/tme: Detect if TME and MKTME is activated by BIOS")
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/all/86dfdf6ced8c9b790f9376bf6c7e22b5608f47c2.1715054189.git.alison.schofield%40intel.com
When TME is disabled by BIOS, the dmesg output is:
x86/tme: not enabled by BIOS
... and TME functionality is not enabled by the kernel, but the TME feature
is still shown in /proc/cpuinfo.
Clear it.
[ mingo: Clarified changelog ]
Signed-off-by: Bingsong Si <sibs@chinatelecom.cn>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: "Huang, Kai" <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20240311071938.13247-1-sibs@chinatelecom.cn
MKTME repurposes the high bit of physical address to key id for encryption
key and, even though MAXPHYADDR in CPUID[0x80000008] remains the same,
the valid bits in the MTRR mask register are based on the reduced number
of physical address bits.
detect_tme() in arch/x86/kernel/cpu/intel.c detects TME and subtracts
it from the total usable physical bits, but it is called too late.
Move the call to early_init_intel() so that it is called in setup_arch(),
before MTRRs are setup.
This fixes boot on TDX-enabled systems, which until now only worked with
"disable_mtrr_cleanup". Without the patch, the values written to the
MTRRs mask registers were 52-bit wide (e.g. 0x000fffff_80000800) and
the writes failed; with the patch, the values are 46-bit wide, which
matches the reduced MAXPHYADDR that is shown in /proc/cpuinfo.
Reported-by: Zixi Chen <zixchen@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240131230902.1867092-3-pbonzini%40redhat.com
Intel CPUs use either topology leaf 0xb/0x1f evaluation or the legacy
SMP/HT evaluation based on CPUID leaf 0x1/0x4.
Move it over to the consolidated topology code and remove the random
topology hacks which are sprinkled into the Intel and the common code.
No functional change intended.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Wang Wendy <wendy.wang@intel.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/r/20240212153624.893644349@linutronix.de
To help make the move of sysctls out of kernel/sysctl.c not incur a size
penalty sysctl has been changed to allow us to not require the sentinel, the
final empty element on the sysctl array. Joel Granados has been doing all this
work. On the v6.6 kernel we got the major infrastructure changes required to
support this. For v6.7-rc1 we have all arch/ and drivers/ modified to remove
the sentinel. Both arch and driver changes have been on linux-next for a bit
less than a month. It is worth re-iterating the value:
- this helps reduce the overall build time size of the kernel and run time
memory consumed by the kernel by about ~64 bytes per array
- the extra 64-byte penalty is no longer inncurred now when we move sysctls
out from kernel/sysctl.c to their own files
For v6.8-rc1 expect removal of all the sentinels and also then the unneeded
check for procname == NULL.
The last 2 patches are fixes recently merged by Krister Johansen which allow
us again to use softlockup_panic early on boot. This used to work but the
alias work broke it. This is useful for folks who want to detect softlockups
super early rather than wait and spend money on cloud solutions with nothing
but an eventual hung kernel. Although this hadn't gone through linux-next it's
also a stable fix, so we might as well roll through the fixes now.
-----BEGIN PGP SIGNATURE-----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=Qf50
-----END PGP SIGNATURE-----
Merge tag 'sysctl-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull sysctl updates from Luis Chamberlain:
"To help make the move of sysctls out of kernel/sysctl.c not incur a
size penalty sysctl has been changed to allow us to not require the
sentinel, the final empty element on the sysctl array. Joel Granados
has been doing all this work. On the v6.6 kernel we got the major
infrastructure changes required to support this. For v6.7-rc1 we have
all arch/ and drivers/ modified to remove the sentinel. Both arch and
driver changes have been on linux-next for a bit less than a month. It
is worth re-iterating the value:
- this helps reduce the overall build time size of the kernel and run
time memory consumed by the kernel by about ~64 bytes per array
- the extra 64-byte penalty is no longer inncurred now when we move
sysctls out from kernel/sysctl.c to their own files
For v6.8-rc1 expect removal of all the sentinels and also then the
unneeded check for procname == NULL.
The last two patches are fixes recently merged by Krister Johansen
which allow us again to use softlockup_panic early on boot. This used
to work but the alias work broke it. This is useful for folks who want
to detect softlockups super early rather than wait and spend money on
cloud solutions with nothing but an eventual hung kernel. Although
this hadn't gone through linux-next it's also a stable fix, so we
might as well roll through the fixes now"
* tag 'sysctl-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (23 commits)
watchdog: move softlockup_panic back to early_param
proc: sysctl: prevent aliased sysctls from getting passed to init
intel drm: Remove now superfluous sentinel element from ctl_table array
Drivers: hv: Remove now superfluous sentinel element from ctl_table array
raid: Remove now superfluous sentinel element from ctl_table array
fw loader: Remove the now superfluous sentinel element from ctl_table array
sgi-xp: Remove the now superfluous sentinel element from ctl_table array
vrf: Remove the now superfluous sentinel element from ctl_table array
char-misc: Remove the now superfluous sentinel element from ctl_table array
infiniband: Remove the now superfluous sentinel element from ctl_table array
macintosh: Remove the now superfluous sentinel element from ctl_table array
parport: Remove the now superfluous sentinel element from ctl_table array
scsi: Remove now superfluous sentinel element from ctl_table array
tty: Remove now superfluous sentinel element from ctl_table array
xen: Remove now superfluous sentinel element from ctl_table array
hpet: Remove now superfluous sentinel element from ctl_table array
c-sky: Remove now superfluous sentinel element from ctl_talbe array
powerpc: Remove now superfluous sentinel element from ctl_table arrays
riscv: Remove now superfluous sentinel element from ctl_table array
x86/vdso: Remove now superfluous sentinel element from ctl_table array
...
This commit comes at the tail end of a greater effort to remove the
empty elements at the end of the ctl_table arrays (sentinels) which
will reduce the overall build time size of the kernel and run time
memory bloat by ~64 bytes per sentinel (further information Link :
https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/)
Remove sentinel element from sld_sysctl and itmt_kern_table. This
removal is safe because register_sysctl_init and register_sysctl
implicitly use the array size in addition to checking for the sentinel.
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com> # for x86
Signed-off-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
cpuinfo_x86::x86_coreid_bits is only used by the AMD numa topology code. No
point in evaluating it on non AMD systems.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230814085112.687588373@linutronix.de
Currently vendor specific headers are included explicitly when used in
common code. Instead, include the vendor specific headers in
microcode.h, and include that in all usages.
No functional change.
Suggested-by: Boris Petkov <bp@alien8.de>
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230812195727.776541545@linutronix.de
There is really no point to have that in the CPUID evaluation code. Move it
into the Intel-specific microcode handling along with the data
structures, defines and helpers required by it. The exports need to stay
for IFS.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230812195727.719202319@linutronix.de
