The BPF subsystem may capture LBR data on a counting event. However, the
current implementation assumes that LBR can/should only be used with
sampling events.
For instance, retsnoop tool ([0]) makes an extensive use of this
functionality and sets up perf event as follows:
struct perf_event_attr attr;
memset(&attr, 0, sizeof(attr));
attr.size = sizeof(attr);
attr.type = PERF_TYPE_HARDWARE;
attr.config = PERF_COUNT_HW_CPU_CYCLES;
attr.sample_type = PERF_SAMPLE_BRANCH_STACK;
attr.branch_sample_type = PERF_SAMPLE_BRANCH_KERNEL;
To limit the LBR for a sampling event is to avoid unnecessary branch
stack setup for a counting event in the sample read. Because LBR is only
read in the sampling event's overflow.
Although in most cases LBR is used in sampling, there is no HW limit to
bind LBR to the sampling mode. Allow an LBR setup for a counting event
unless in the sample read mode.
Fixes: 85846b2707 ("perf/x86: Add PERF_X86_EVENT_NEEDS_BRANCH_STACK flag")
Closes: https://lore.kernel.org/lkml/20240905180055.1221620-1-andrii@kernel.org/
Reported-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Andrii Nakryiko <andrii@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240909155848.326640-1-kan.liang@linux.intel.com
There are three cstate PMUs with different scopes, core, die and module.
The scopes are supported by the generic perf_event subsystem now.
Set the scope for each PMU and remove all the cpumask and hotplug codes.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240802151643.1691631-4-kan.liang@linux.intel.com
Running the ltp test cve-2015-3290 concurrently reports the following
warnings.
perfevents: irq loop stuck!
WARNING: CPU: 31 PID: 32438 at arch/x86/events/intel/core.c:3174
intel_pmu_handle_irq+0x285/0x370
Call Trace:
<NMI>
? __warn+0xa4/0x220
? intel_pmu_handle_irq+0x285/0x370
? __report_bug+0x123/0x130
? intel_pmu_handle_irq+0x285/0x370
? __report_bug+0x123/0x130
? intel_pmu_handle_irq+0x285/0x370
? report_bug+0x3e/0xa0
? handle_bug+0x3c/0x70
? exc_invalid_op+0x18/0x50
? asm_exc_invalid_op+0x1a/0x20
? irq_work_claim+0x1e/0x40
? intel_pmu_handle_irq+0x285/0x370
perf_event_nmi_handler+0x3d/0x60
nmi_handle+0x104/0x330
Thanks to Thomas Gleixner's analysis, the issue is caused by the low
initial period (1) of the frequency estimation algorithm, which triggers
the defects of the HW, specifically erratum HSW11 and HSW143. (For the
details, please refer https://lore.kernel.org/lkml/87plq9l5d2.ffs@tglx/)
The HSW11 requires a period larger than 100 for the INST_RETIRED.ALL
event, but the initial period in the freq mode is 1. The erratum is the
same as the BDM11, which has been supported in the kernel. A minimum
period of 128 is enforced as well on HSW.
HSW143 is regarding that the fixed counter 1 may overcount 32 with the
Hyper-Threading is enabled. However, based on the test, the hardware
has more issues than it tells. Besides the fixed counter 1, the message
'interrupt took too long' can be observed on any counter which was armed
with a period < 32 and two events expired in the same NMI. A minimum
period of 32 is enforced for the rest of the events.
The recommended workaround code of the HSW143 is not implemented.
Because it only addresses the issue for the fixed counter. It brings
extra overhead through extra MSR writing. No related overcounting issue
has been reported so far.
Fixes: 3a632cb229 ("perf/x86/intel: Add simple Haswell PMU support")
Reported-by: Li Huafei <lihuafei1@huawei.com>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240819183004.3132920-1-kan.liang@linux.intel.com
Closes: https://lore.kernel.org/lkml/20240729223328.327835-1-lihuafei1@huawei.com/
The default paranoid setting was updated in commit 0161028b7c
("perf/core: Change the default paranoia level to 2") so this comment is
no longer true.
Signed-off-by: James Clark <james.clark@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20240802105256.335961-1-james.clark@linaro.org
Some uncore PMON registers are located in the MMIO space of the Host
Bridge and DRAM Controller device, which is located at D0:F0 for
Tiger Lake and later client generation.
Use D0:F0 as a default device. So it doesn't need to keep adding the
complete Device ID list for each generation anymore.
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20240731141353.759643-5-kan.liang@linux.intel.com
LNL uncore imc freerunning counters keep same as previous HW.
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20240731141353.759643-4-kan.liang@linux.intel.com
The uncore subsystem for Lunar Lake is similar to the previous
Meteor Lake. The uncore PerfMon registers are located at both
MSR and MMIO space.
The ARB and iMC are kept. There is no difference from the Meteor Lake.
Move the global control initialization to the first box of the CBOX.
The sNCU is moved to the MMIO space.
The HBO is newly added and only be accessed from the MMIO space.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240731141353.759643-3-kan.liang@linux.intel.com
Some uncore PMON registers are located in the MMIO space. For the client
machine, the MMIO space is usually located at D0:F0 but in a different
BAR. For example, some uncore PMON registers are located in the SAF BAR,
not the MCHBAR in the Lunar Lake.
The current __uncore_imc_init_box() hard code the BAR information.
Factor out the uncore_get_box_mmio_addr() which uses the BAR information
as a parameter.
The only change is the error output message. The hardcode name 'MCHBAR'
is replaced by the offset of a BAR.
Add a new macro, MMIO_UNCORE_COMMON_OPS(), since the MMIO ops functions
are usually the same among different generations.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240731141353.759643-2-kan.liang@linux.intel.com
>From the perspective of the uncore PMU, the Arrow Lake is the same as
the previous Meteor Lake. The only difference is the event list, which
will be supported in the perf tool later.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240731141353.759643-1-kan.liang@linux.intel.com
pt_event_snapshot_aux() uses pt->handle_nmi to determine if tracing
needs to be stopped, however tracing can still be going because
pt->handle_nmi is set to zero before tracing is stopped in pt_event_stop,
whereas pt_event_snapshot_aux() requires that tracing must be stopped in
order to copy a sample of trace from the buffer.
Instead call pt_config_stop() always, which anyway checks config for
RTIT_CTL_TRACEEN and does nothing if it is already clear.
Note pt_event_snapshot_aux() can continue to use pt->handle_nmi to
determine if the trace needs to be restarted afterwards.
Fixes: 25e8920b30 ("perf/x86/intel/pt: Add sampling support")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20240715160712.127117-2-adrian.hunter@intel.com
Package C2 residency counter is also available on Sierra Forest.
So add it support in srf_cstates.
Fixes: 3877d55a0d ("perf/x86/intel/cstate: Add Sierra Forest support")
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Wendy Wang <wendy.wang@intel.com>
Link: https://lore.kernel.org/r/20240717031609.74513-1-zhenyuw@linux.intel.com
- Intel PT support enhancements & fixes
- Fix leaked SIGTRAP events
- Improve and fix the Intel uncore driver
- Add support for Intel HBM and CXL uncore counters
- Add Intel Lake and Arrow Lake support
- AMD uncore driver fixes
- Make SIGTRAP and __perf_pending_irq() work on RT
- Micro-optimizations
- Misc cleanups and fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=gguT
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2024-07-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull performance events updates from Ingo Molnar:
- Intel PT support enhancements & fixes
- Fix leaked SIGTRAP events
- Improve and fix the Intel uncore driver
- Add support for Intel HBM and CXL uncore counters
- Add Intel Lake and Arrow Lake support
- AMD uncore driver fixes
- Make SIGTRAP and __perf_pending_irq() work on RT
- Micro-optimizations
- Misc cleanups and fixes
* tag 'perf-core-2024-07-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits)
perf/x86/intel: Add a distinct name for Granite Rapids
perf/x86/intel/ds: Fix non 0 retire latency on Raptorlake
perf/x86/intel: Hide Topdown metrics events if the feature is not enumerated
perf/x86/intel/uncore: Fix the bits of the CHA extended umask for SPR
perf: Split __perf_pending_irq() out of perf_pending_irq()
perf: Don't disable preemption in perf_pending_task().
perf: Move swevent_htable::recursion into task_struct.
perf: Shrink the size of the recursion counter.
perf: Enqueue SIGTRAP always via task_work.
task_work: Add TWA_NMI_CURRENT as an additional notify mode.
perf: Move irq_work_queue() where the event is prepared.
perf: Fix event leak upon exec and file release
perf: Fix event leak upon exit
task_work: Introduce task_work_cancel() again
task_work: s/task_work_cancel()/task_work_cancel_func()/
perf/x86/amd/uncore: Fix DF and UMC domain identification
perf/x86/amd/uncore: Avoid PMU registration if counters are unavailable
perf/x86/intel: Support Perfmon MSRs aliasing
perf/x86/intel: Support PERFEVTSEL extension
perf/x86: Add config_mask to represent EVENTSEL bitmask
...
explicitly specify the flag if there's a valid reason to show it in
/proc/cpuinfo
- Switch a bunch of Intel x86 model checking code to the new CPU model
defines
- Fixes and cleanups
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmaVZ+EACgkQEsHwGGHe
VUqTgA//aJez6C5SmuqIofqgimr+8JGNThf4vFB3O9tN0ony3IR8IRieF+sOZFXE
WVyN7KOhPs2XvNzVAaJpzWUcg/E2bXzVrOKfx3uFiyNiBttKLVot7Hl640wqWGoG
eTViTpQ6IALY7lEI6vFNXz+4Ja5PWmHxWdBkvP9ehSvqNxHivTWL4HQ11pcCWQEA
i+V37PbOHsnH7ZprJtaV0ihtjFblk9/R4qoZuT3SObhG0QDJK4Q7yYUelxXMUUgD
Yo3nXluQl6Vc5dD2ULYkTlhzMxoZUMURty897vYSsZz49ZXsS6fsvd+BheSQVOv1
hzaqqFYijdIpPI1zwgAPM+e6S/EAafpNVcEkjhHGZIJehwXm3teoSlX5tK2NPGoe
PLYrwPWAzagdS3dWvrvBYT3Bu7pygieDSyPFfVP2XQsElHsWhYvBtxeH/uUwm+v4
xjtXaJUj9eznChPaDZhCl8ioh9szUKHsh2NJ5ND7qpxPCFpz1Xj9ZmbIYTjHEgjG
IT8dFfykKdyh5htJWw/P8LbexpEMTmu/LDrDXt+tFsDLBKIkeLiP3h8+yDR+vJ7K
OGBjY2ciSi9Wy9ynunCOCNHNBdia1qc3AJWSg/2YP4NW+RzRLe6cIs+Ih4s1N5lx
ADvw+TA9CAKo1KASyOVYAxq7h4xlsyH6jbCC3ZW3P/a+Bs8smqM=
=SEED
-----END PGP SIGNATURE-----
Merge tag 'x86_cpu_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpu model updates from Borislav Petkov:
- Flip the logic to add feature names to /proc/cpuinfo to having to
explicitly specify the flag if there's a valid reason to show it in
/proc/cpuinfo
- Switch a bunch of Intel x86 model checking code to the new CPU model
defines
- Fixes and cleanups
* tag 'x86_cpu_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu/intel: Drop stray FAM6 check with new Intel CPU model defines
x86/cpufeatures: Flip the /proc/cpuinfo appearance logic
x86/CPU/AMD: Always inline amd_clear_divider()
x86/mce/inject: Add missing MODULE_DESCRIPTION() line
perf/x86/rapl: Switch to new Intel CPU model defines
x86/boot: Switch to new Intel CPU model defines
x86/cpu: Switch to new Intel CPU model defines
perf/x86/intel: Switch to new Intel CPU model defines
x86/virt/tdx: Switch to new Intel CPU model defines
x86/PCI: Switch to new Intel CPU model defines
x86/cpu/intel: Switch to new Intel CPU model defines
x86/platform/intel-mid: Switch to new Intel CPU model defines
x86/pconfig: Remove unused MKTME pconfig code
x86/cpu: Remove useless work in detect_tme_early()
Currently, the Sapphire Rapids and Granite Rapids share the same PMU
name, sapphire_rapids. Because from the kernel’s perspective, GNR is
similar to SPR. The only key difference is that they support different
extra MSRs. The code path and the PMU name are shared.
However, from end users' perspective, they are quite different. Besides
the extra MSRs, GNR has a newer PEBS format, supports Retire Latency,
supports new CPUID enumeration architecture, doesn't required the
load-latency AUX event, has additional TMA Level 1 Architectural Events,
etc. The differences can be enumerated by CPUID or the PERF_CAPABILITIES
MSR. They weren't reflected in the model-specific kernel setup.
But it is worth to have a distinct PMU name for GNR.
Fixes: a6742cb90b ("perf/x86/intel: Fix the FRONTEND encoding on GNR and MTL")
Suggested-by: Ahmad Yasin <ahmad.yasin@intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20240708193336.1192217-3-kan.liang@linux.intel.com
A non-0 retire latency can be observed on a Raptorlake which doesn't
support the retire latency feature.
By design, the retire latency shares the PERF_SAMPLE_WEIGHT_STRUCT
sample type with other types of latency. That could avoid adding too
many different sample types to support all kinds of latency. For the
machine which doesn't support some kind of latency, 0 should be
returned.
Perf doesn’t clear/init all the fields of a sample data for the sake
of performance. It expects the later perf_{prepare,output}_sample() to
update the uninitialized field. However, the current implementation
doesn't touch the field of the retire latency if the feature is not
supported. The memory garbage is dumped into the perf data.
Clear the retire latency if the feature is not supported.
Fixes: c87a31093c ("perf/x86: Support Retire Latency")
Reported-by: "Bayduraev, Alexey V" <alexey.v.bayduraev@intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: "Bayduraev, Alexey V" <alexey.v.bayduraev@intel.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20240708193336.1192217-4-kan.liang@linux.intel.com
The below error is observed on Ice Lake VM.
$ perf stat
Error:
The sys_perf_event_open() syscall returned with 22 (Invalid argument)
for event (slots).
/bin/dmesg | grep -i perf may provide additional information.
In a virtualization env, the Topdown metrics and the slots event haven't
been supported yet. The guest CPUID doesn't enumerate them. However, the
current kernel unconditionally exposes the slots event and the Topdown
metrics events to sysfs, which misleads the perf tool and triggers the
error.
Hide the perf-metrics topdown events and the slots event if the
perf-metrics feature is not enumerated.
The big core of a hybrid platform can also supports the perf-metrics
feature. Fix the hybrid platform as well.
Closes: https://lore.kernel.org/lkml/CAM9d7cj8z+ryyzUHR+P1Dcpot2jjW+Qcc4CPQpfafTXN=LEU0Q@mail.gmail.com/
Reported-by: Dongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Dongli Zhang <dongli.zhang@oracle.com>
Link: https://lkml.kernel.org/r/20240708193336.1192217-2-kan.liang@linux.intel.com
The perf stat errors out with UNC_CHA_TOR_INSERTS.IA_HIT_CXL_ACC_LOCAL
event.
$perf stat -e uncore_cha_55/event=0x35,umask=0x10c0008101/ -a -- ls
event syntax error: '..0x35,umask=0x10c0008101/'
\___ Bad event or PMU
The definition of the CHA umask is config:8-15,32-55, which is 32bit.
However, the umask of the event is bigger than 32bit.
This is an error in the original uncore spec.
Add a new umask_ext5 for the new CHA umask range.
Fixes: 949b11381f ("perf/x86/intel/uncore: Add Sapphire Rapids server CHA support")
Closes: https://lore.kernel.org/linux-perf-users/alpine.LRH.2.20.2401300733310.11354@Diego/
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20240708185524.1185505-1-kan.liang@linux.intel.com
The architectural performance monitoring V6 supports a new range of
counters' MSRs in the 19xxH address range. They include all the GP
counter MSRs, the GP control MSRs, and the fixed counter MSRs.
The step between each sibling counter is 4. Add intel_pmu_addr_offset()
to calculate the correct offset.
Add fixedctr in struct x86_pmu to store the address of the fixed counter
0. It can be used to calculate the rest of the fixed counters.
The MSR address of the fixed counter control is not changed.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lkml.kernel.org/r/20240626143545.480761-9-kan.liang@linux.intel.com
Two new fields (the unit mask2, and the equal flag) are added in the
IA32_PERFEVTSELx MSRs. They can be enumerated by the CPUID.23H.0.EBX.
Update the config_mask in x86_pmu and x86_hybrid_pmu for the true layout
of the PERFEVTSEL.
Expose the new formats into sysfs if they are available. The umask
extension reuses the same format attr name "umask" as the previous
umask. Add umask2_show to determine/display the correct format
for the current machine.
Co-developed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lkml.kernel.org/r/20240626143545.480761-8-kan.liang@linux.intel.com
Different vendors may support different fields in EVENTSEL MSR, such as
Intel would introduce new fields umask2 and eq bits in EVENTSEL MSR
since Perfmon version 6. However, a fixed mask X86_RAW_EVENT_MASK is
used to filter the attr.config.
Introduce a new config_mask to record the real supported EVENTSEL
bitmask.
Only apply it to the existing code now. No functional change.
Co-developed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lkml.kernel.org/r/20240626143545.480761-7-kan.liang@linux.intel.com
A new PEBS data source format is introduced for the p-core of Lunar
Lake. The data source field is extended to 8 bits with new encodings.
A new layout is introduced into the union intel_x86_pebs_dse.
Introduce the lnl_latency_data() to parse the new format.
Enlarge the pebs_data_source[] accordingly to include new encodings.
Only the mem load and the mem store events can generate the data source.
Introduce INTEL_HYBRID_LDLAT_CONSTRAINT and
INTEL_HYBRID_STLAT_CONSTRAINT to mark them.
Add two new bits for the new cache-related data src, L2_MHB and MSC.
The L2_MHB is short for L2 Miss Handling Buffer, which is similar to
LFB (Line Fill Buffer), but to track the L2 Cache misses.
The MSC stands for the memory-side cache.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lkml.kernel.org/r/20240626143545.480761-6-kan.liang@linux.intel.com
The model-specific pebs_latency_data functions of ADL and MTL use the
"small" as a postfix to indicate the e-core. The postfix is too generic
for a model-specific function. It cannot provide useful information that
can directly map it to a specific uarch, which can facilitate the
development and maintenance.
Use the abbr of the uarch to rename the model-specific functions.
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lkml.kernel.org/r/20240626143545.480761-5-kan.liang@linux.intel.com
From PMU's perspective, Lunar Lake and Arrow Lake are similar to the
previous generation Meteor Lake. Both are hybrid platforms, with e-core
and p-core.
The key differences include:
- The e-core supports 3 new fixed counters
- The p-core supports an updated PEBS Data Source format
- More GP counters (Updated event constraint table)
- New Architectural performance monitoring V6
(New Perfmon MSRs aliasing, umask2, eq).
- New PEBS format V6 (Counters Snapshotting group)
- New RDPMC metrics clear mode
The legacy features, the 3 new fixed counters and updated event
constraint table are enabled in this patch.
The new PEBS data source format, the architectural performance
monitoring V6, the PEBS format V6, and the new RDPMC metrics clear mode
are supported in the following patches.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lkml.kernel.org/r/20240626143545.480761-4-kan.liang@linux.intel.com
The current perf assumes that both GP and fixed counters are contiguous.
But it's not guaranteed on newer Intel platforms or in a virtualization
environment.
Use the counter mask to replace the number of counters for both GP and
the fixed counters. For the other ARCHs or old platforms which don't
support a counter mask, using GENMASK_ULL(num_counter - 1, 0) to
replace. There is no functional change for them.
The interface to KVM is not changed. The number of counters still be
passed to KVM. It can be updated later separately.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lkml.kernel.org/r/20240626143545.480761-3-kan.liang@linux.intel.com
The current perf assumes that the counters that support PEBS are
contiguous. But it's not guaranteed with the new leaf 0x23 introduced.
The counters are enumerated with a counter mask. There may be holes in
the counter mask for future platforms or in a virtualization
environment.
Store the PEBS event mask rather than the maximum number of PEBS
counters in the x86 PMU structures.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lkml.kernel.org/r/20240626143545.480761-2-kan.liang@linux.intel.com
Compared with previous client platforms, PC8 is removed from Lunarlake.
It supports CC1/CC6/CC7 and PC2/PC3/PC6/PC10 residency counters.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20240628031758.43103-4-rui.zhang@intel.com
For Alderlake, the spec changes after the patch submitted and PC7/PC9
are removed.
Raptorlake and Meteorlake, which copy the Alderlake cstate PMU, also
don't have PC7/PC9.
Remove PC7/PC9 support for Alderlake/Raptorlake/Meteorlake.
Fixes: d0ca946bcf ("perf/x86/cstate: Add Alder Lake CPU support")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20240628031758.43103-2-rui.zhang@intel.com
Currently, perf allocates an array of page pointers which is limited in
size by MAX_PAGE_ORDER. That in turn limits the maximum Intel PT buffer
size to 2GiB. Should that limitation be lifted, the Intel PT driver can
support larger sizes, except for one calculation in
pt_topa_entry_for_page(), which is limited to 32-bits.
Fix pt_topa_entry_for_page() address calculation by adding a cast.
Fixes: 39152ee51b ("perf/x86/intel/pt: Get rid of reverse lookup table for ToPA")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240624201101.60186-4-adrian.hunter@intel.com
topa_entry->base is a bit-field. Bit-fields are not promoted to a 64-bit
type, even if the underlying type is 64-bit, and so, if necessary, must
be cast to a larger type when calculations are done.
Fix a topa_entry->base address calculation by adding a cast.
Without the cast, the address was limited to 36-bits i.e. 64GiB.
The address calculation is used on systems that do not support Multiple
Entry ToPA (only Broadwell), and affects physical addresses on or above
64GiB. Instead of writing to the correct address, the address comprising
the first 36 bits would be written to.
Intel PT snapshot and sampling modes are not affected.
Fixes: 52ca9ced3f ("perf/x86/intel/pt: Add Intel PT PMU driver")
Reported-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240624201101.60186-3-adrian.hunter@intel.com
topa_entry->base needs to store a pfn. It obviously needs to be
large enough to store the largest possible x86 pfn which is
MAXPHYADDR-PAGE_SIZE (52-12). So it is 4 bits too small.
Increase the size of topa_entry->base from 36 bits to 40 bits.
Note, systems where physical addresses can be 256TiB or more are affected.
[ Adrian: Amend commit message as suggested by Dave Hansen ]
Fixes: 52ca9ced3f ("perf/x86/intel/pt: Add Intel PT PMU driver")
Signed-off-by: Marco Cavenati <cavenati.marco@gmail.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240624201101.60186-2-adrian.hunter@intel.com
Unknown uncore PMON types can be found in both SPR and EMR with HBM or
CXL.
$ls /sys/devices/ | grep type
uncore_type_12_16
uncore_type_12_18
uncore_type_12_2
uncore_type_12_4
uncore_type_12_6
uncore_type_12_8
uncore_type_13_17
uncore_type_13_19
uncore_type_13_3
uncore_type_13_5
uncore_type_13_7
uncore_type_13_9
The unknown PMON types are HBM and CXL PMON. Except for the name, the
other information regarding the HBM and CXL PMON counters can be
retrieved via the discovery table. Add them into the uncores tables for
SPR and EMR.
The event config registers for all CXL related units are 8-byte apart.
Add SPR_UNCORE_MMIO_OFFS8_COMMON_FORMAT to specially handle it.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Yunying Sun <yunying.sun@intel.com>
Link: https://lore.kernel.org/r/20240614134631.1092359-9-kan.liang@linux.intel.com
The unit control and ID information are retrieved from the unit control
RB tree. No one uses the old structure anymore. Remove them.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Yunying Sun <yunying.sun@intel.com>
Link: https://lore.kernel.org/r/20240614134631.1092359-8-kan.liang@linux.intel.com
The unit control RB tree has the unit control and unit ID information
for all the PCI units. Use them to replace the box_ctls/pci_offsets to
get an accurate unit control address for PCI uncore units.
The UPI/M3UPI units in the discovery table are ignored. Please see the
commit 65248a9a9e ("perf/x86/uncore: Add a quirk for UPI on SPR").
Manually allocate a unit control RB tree for UPI/M3UPI.
Add cleanup_extra_boxes to release such manual allocation.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Yunying Sun <yunying.sun@intel.com>
Link: https://lore.kernel.org/r/20240614134631.1092359-7-kan.liang@linux.intel.com
The unit control RB tree has the unit control and unit ID information
for all the MSR units. Use them to replace the box_ctl and
uncore_msr_box_ctl() to get an accurate unit control address for MSR
uncore units.
Add intel_generic_uncore_assign_hw_event(), which utilizes the accurate
unit control address from the unit control RB tree to calculate the
config_base and event_base.
The unit id related information should be retrieved from the unit
control RB tree as well.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Yunying Sun <yunying.sun@intel.com>
Link: https://lore.kernel.org/r/20240614134631.1092359-6-kan.liang@linux.intel.com
The unit control RB tree has the unit control and unit ID information
for all the units. Use it to replace the box_ctls/mmio_offsets to get
an accurate unit control address for MMIO uncore units.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Yunying Sun <yunying.sun@intel.com>
Link: https://lore.kernel.org/r/20240614134631.1092359-5-kan.liang@linux.intel.com
The box_ids only save the unit ID for the first die. If a unit, e.g., a
CXL unit, doesn't exist in the first die. The unit ID cannot be
retrieved.
The unit control RB tree also stores the unit ID information.
Retrieve the unit ID from the unit control RB tree
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Yunying Sun <yunying.sun@intel.com>
Link: https://lore.kernel.org/r/20240614134631.1092359-4-kan.liang@linux.intel.com
The cpumask of some uncore units, e.g., CXL uncore units, may be wrong
under some configurations. Perf may access an uncore counter of a
non-existent uncore unit.
The uncore driver assumes that all uncore units are symmetric among
dies. A global cpumask is shared among all uncore PMUs. However, some
CXL uncore units may only be available on some dies.
A per PMU cpumask is introduced to track the CPU mask of this PMU.
The driver searches the unit control RB tree to check whether the PMU is
available on a given die, and updates the per PMU cpumask accordingly.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Yunying Sun <yunying.sun@intel.com>
Link: https://lore.kernel.org/r/20240614134631.1092359-3-kan.liang@linux.intel.com
The unit control address of some CXL units may be wrongly calculated
under some configuration on a EMR machine.
The current implementation only saves the unit control address of the
units from the first die, and the first unit of the rest of dies. Perf
assumed that the units from the other dies have the same offset as the
first die. So the unit control address of the rest of the units can be
calculated. However, the assumption is wrong, especially for the CXL
units.
Introduce an RB tree for each uncore type to save the unit control
address and three kinds of ID information (unit ID, PMU ID, and die ID)
for all units.
The unit ID is a physical ID of a unit.
The PMU ID is a logical ID assigned to a unit. The logical IDs start
from 0 and must be contiguous. The physical ID and the logical ID are
1:1 mapping. The units with the same physical ID in different dies share
the same PMU.
The die ID indicates which die a unit belongs to.
The RB tree can be searched by two different keys (unit ID or PMU ID +
die ID). During the RB tree setup, the unit ID is used as a key to look
up the RB tree. The perf can create/assign a proper PMU ID to the unit.
Later, after the RB tree is setup, PMU ID + die ID is used as a key to
look up the RB tree to fill the cpumask of a PMU. It's used more
frequently, so PMU ID + die ID is compared in the unit_less().
The uncore_find_unit() has to be O(N). But the RB tree setup only occurs
once during the driver load time. It should be acceptable.
Compared with the current implementation, more space is required to save
the information of all units. The extra size should be acceptable.
For example, on EMR, there are 221 units at most. For a 2-socket machine,
the extra space is ~6KB at most.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240614134631.1092359-2-kan.liang@linux.intel.com
New CPU #defines encode vendor and family as well as model.
Update INTEL_CPU_DESC() to work with vendor/family/model.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20240520224620.9480-34-tony.luck%40intel.com
Here is the small set of driver core and kernfs changes for 6.10-rc1.
Nothing major here at all, just a small set of changes for some driver
core apis, and minor fixups. Included in here are:
- sysfs_bin_attr_simple_read() helper added and used
- device_show_string() helper added and used
All usages of these were acked by the various maintainers. Also in here
are:
- kernfs minor cleanup
- removed unused functions
- typo fix in documentation
- pay attention to sysfs_create_link() failures in module.c finally.
All of these have been in linux-next for a very long time with no
reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZk3+hQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylfTwCfUyHWkDZuZ7ehdtjzfmcd4EKZBK8An3AAV99G
ox8PXMxuFTaUEdT/69FQ
=2sEo
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the small set of driver core and kernfs changes for 6.10-rc1.
Nothing major here at all, just a small set of changes for some driver
core apis, and minor fixups. Included in here are:
- sysfs_bin_attr_simple_read() helper added and used
- device_show_string() helper added and used
All usages of these were acked by the various maintainers. Also in
here are:
- kernfs minor cleanup
- removed unused functions
- typo fix in documentation
- pay attention to sysfs_create_link() failures in module.c finally
All of these have been in linux-next for a very long time with no
reported problems"
* tag 'driver-core-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
device property: Fix a typo in the description of device_get_child_node_count()
kernfs: mount: Remove unnecessary ‘NULL’ values from knparent
scsi: Use device_show_string() helper for sysfs attributes
platform/x86: Use device_show_string() helper for sysfs attributes
perf: Use device_show_string() helper for sysfs attributes
IB/qib: Use device_show_string() helper for sysfs attributes
hwmon: Use device_show_string() helper for sysfs attributes
driver core: Add device_show_string() helper for sysfs attributes
treewide: Use sysfs_bin_attr_simple_read() helper
sysfs: Add sysfs_bin_attr_simple_read() helper
module: don't ignore sysfs_create_link() failures
driver core: Remove unused platform_notify, platform_notify_remove
Use of this structure was removed in:
8f2a28c585 ("perf/x86/cstate: Use new probe function")
Remove the now stale type as well.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: linux-kernel@vger.kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Deduplicate sysfs ->show() callbacks which expose a string at a static
memory location. Use the newly introduced device_show_string() helper
in the driver core instead by declaring those sysfs attributes with
DEVICE_STRING_ATTR_RO().
No functional change intended.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Link: https://lore.kernel.org/r/3a297850312b4ecb62d6872121de04496900f502.1713608122.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
New CPU #defines encode vendor and family as well as model.
[ bp: Squash *three* uncore patches into one. ]
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/all/20240424181501.41557-1-tony.luck%40intel.com
Add a "has_callstack" field to the x86_pmu_lbr structure used to pass
information to KVM, and set it accordingly in x86_perf_get_lbr(). KVM
will use has_callstack to avoid trying to create perf LBR events with
PERF_SAMPLE_BRANCH_CALL_STACK on CPUs that don't support callstacks.
Reviewed-by: Mingwei Zhang <mizhang@google.com>
Link: https://lore.kernel.org/r/20240307011344.835640-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
The MSR_PEBS_DATA_CFG MSR register is used to configure which data groups
should be generated into a PEBS record, and it's shared among all counters.
If there are different configurations among counters, perf combines all the
configurations.
The first perf command as below requires a complete PEBS record
(including memory info, GPRs, XMMs, and LBRs). The second perf command
only requires a basic group. However, after the second perf command is
running, the MSR_PEBS_DATA_CFG register is cleared. Only a basic group is
generated in a PEBS record, which is wrong. The required information
for the first perf command is missed.
$ perf record --intr-regs=AX,SP,XMM0 -a -C 8 -b -W -d -c 100000003 -o /dev/null -e cpu/event=0xd0,umask=0x81/upp &
$ sleep 5
$ perf record --per-thread -c 1 -e cycles:pp --no-timestamp --no-tid taskset -c 8 ./noploop 1000
The first PEBS event is a system-wide PEBS event. The second PEBS event
is a per-thread event. When the thread is scheduled out, the
intel_pmu_pebs_del() function is invoked to update the PEBS state.
Since the system-wide event is still available, the cpuc->n_pebs is 1.
The cpuc->pebs_data_cfg is cleared. The data configuration for the
system-wide PEBS event is lost.
The (cpuc->n_pebs == 1) check was introduced in commit:
b6a32f023f ("perf/x86: Fix PEBS threshold initialization")
At that time, it indeed didn't hurt whether the state was updated
during the removal, because only the threshold is updated.
The calculation of the threshold takes the last PEBS event into
account.
However, since commit:
b752ea0c28 ("perf/x86/intel/ds: Flush PEBS DS when changing PEBS_DATA_CFG")
we delay the threshold update, and clear the PEBS data config, which triggers
the bug.
The PEBS data config update scope should not be shrunk during removal.
[ mingo: Improved the changelog & comments. ]
Fixes: b752ea0c28 ("perf/x86/intel/ds: Flush PEBS DS when changing PEBS_DATA_CFG")
Reported-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240401133320.703971-1-kan.liang@linux.intel.com
cure Sparse warnings.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmXvAFQRHG1pbmdvQGtl
cm5lbC5vcmcACgkQEnMQ0APhK1hkDRAAwASVCQ88kiGqNQtHibXlK54mAFGsc0xv
T8OPds15DUzoLg/y8lw0X0DHly6MdGXVmygybejNIw2BN4lhLjQ7f4Ria7rv7LDy
FcI1jfvysEMyYRFHGRefb/GBFzuEfKoROwf+QylGmKz0ZK674gNMngsI9pwOBdbe
wElq3IkHoNuTUfH9QA4BvqGam1n122nvVTop3g0PMHWzx9ky8hd/BEUjXFZhfINL
zZk3fwUbER2QYbhHt+BN2GRbdf2BrKvqTkXpKxyXTdnpiqAo0CzBGKerZ62H82qG
n737Nib1lrsfM5yDHySnau02aamRXaGvCJUd6gpac1ZmNpZMWhEOT/0Tr/Nj5ztF
lUAvKqMZn/CwwQky1/XxD0LHegnve0G+syqQt/7x7o1ELdiwTzOWMCx016UeodzB
yyHf3Xx9J8nt3snlrlZBaGEfegg9ePLu5Vir7iXjg3vrloUW8A+GZM62NVxF4HVV
QWF80BfWf8zbLQ/OS1382t1shaioIe5pEXzIjcnyVIZCiiP2/5kP2O6P4XVbwVlo
Ca5eEt8U1rtsLUZaCzI2ZRTQf/8SLMQWyaV+ZmkVwcVdFoARC31EgdE5wYYoZOf6
7Vl+rXd+rZCuTWk0ZgznCZEm75aaqukaQCBa2V8hIVociLFVzhg/Tjedv7s0CspA
hNfxdN1LDZc=
=0eJ7
-----END PGP SIGNATURE-----
Merge tag 'x86-cleanups-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Ingo Molnar:
"Misc cleanups, including a large series from Thomas Gleixner to cure
sparse warnings"
* tag 'x86-cleanups-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/nmi: Drop unused declaration of proc_nmi_enabled()
x86/callthunks: Use EXPORT_PER_CPU_SYMBOL_GPL() for per CPU variables
x86/cpu: Provide a declaration for itlb_multihit_kvm_mitigation
x86/cpu: Use EXPORT_PER_CPU_SYMBOL_GPL() for x86_spec_ctrl_current
x86/uaccess: Add missing __force to casts in __access_ok() and valid_user_address()
x86/percpu: Cure per CPU madness on UP
smp: Consolidate smp_prepare_boot_cpu()
x86/msr: Add missing __percpu annotations
x86/msr: Prepare for including <linux/percpu.h> into <asm/msr.h>
perf/x86/amd/uncore: Fix __percpu annotation
x86/nmi: Remove an unnecessary IS_ENABLED(CONFIG_SMP)
x86/apm_32: Remove dead function apm_get_battery_status()
x86/insn-eval: Fix function param name in get_eff_addr_sib()
To clean up the per CPU insanity of UP which causes sparse to be rightfully
unhappy and prevents the usage of the generic per CPU accessors on cpu_info
it is necessary to include <linux/percpu.h> into <asm/msr.h>.
Including <linux/percpu.h> into <asm/msr.h> is impossible because it ends
up in header dependency hell. The problem is that <asm/processor.h>
includes <asm/msr.h>. The inclusion of <linux/percpu.h> results in a
compile fail where the compiler cannot longer handle an include in
<asm/cpufeature.h> which references boot_cpu_data which is
defined in <asm/processor.h>.
The only reason why <asm/msr.h> is included in <asm/processor.h> are the
set/get_debugctlmsr() inlines. They are defined there because <asm/processor.h>
is such a nice dump ground for everything. In fact they belong obviously
into <asm/debugreg.h>.
Move them to <asm/debugreg.h> and fix up the resulting damage which is just
exposing the reliance on random include chains.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240304005104.454678686@linutronix.de
Now that __num_cores_per_package and __num_threads_per_package are
available, cpuinfo::x86_max_cores and the related math all over the place
can be replaced with the ready to consume data.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20240213210253.176147806@linutronix.de
- Add branch stack counters ABI extension to better capture
the growing amount of information the PMU exposes via
branch stack sampling. There's matching tooling support.
- Fix race when creating the nr_addr_filters sysfs file
- Add Intel Sierra Forest and Grand Ridge intel/cstate
PMU support.
- Add Intel Granite Rapids, Sierra Forest and Grand Ridge
uncore PMU support.
- Misc cleanups & fixes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=2O/5
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2024-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull performance events updates from Ingo Molnar:
- Add branch stack counters ABI extension to better capture the growing
amount of information the PMU exposes via branch stack sampling.
There's matching tooling support.
- Fix race when creating the nr_addr_filters sysfs file
- Add Intel Sierra Forest and Grand Ridge intel/cstate PMU support
- Add Intel Granite Rapids, Sierra Forest and Grand Ridge uncore PMU
support
- Misc cleanups & fixes
* tag 'perf-core-2024-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/uncore: Factor out topology_gidnid_map()
perf/x86/intel/uncore: Fix NULL pointer dereference issue in upi_fill_topology()
perf/x86/amd: Reject branch stack for IBS events
perf/x86/intel/uncore: Support Sierra Forest and Grand Ridge
perf/x86/intel/uncore: Support IIO free-running counters on GNR
perf/x86/intel/uncore: Support Granite Rapids
perf/x86/uncore: Use u64 to replace unsigned for the uncore offsets array
perf/x86/intel/uncore: Generic uncore_get_uncores and MMIO format of SPR
perf: Fix the nr_addr_filters fix
perf/x86/intel/cstate: Add Grand Ridge support
perf/x86/intel/cstate: Add Sierra Forest support
x86/smp: Export symbol cpu_clustergroup_mask()
perf/x86/intel/cstate: Cleanup duplicate attr_groups
perf/core: Fix narrow startup race when creating the perf nr_addr_filters sysfs file
perf/x86/intel: Support branch counters logging
perf/x86/intel: Reorganize attrs and is_visible
perf: Add branch_sample_call_stack
perf/x86: Add PERF_X86_EVENT_NEEDS_BRANCH_STACK flag
perf: Add branch stack counters
- A micro-optimization got misplaced as a cleanup:
- Micro-optimize the asm code in secondary_startup_64_no_verify()
- Change global variables to local
- Add missing kernel-doc function parameter descriptions
- Remove unused parameter from a macro
- Remove obsolete Kconfig entry
- Fix comments
- Fix typos, mostly scripted, manually reviewed
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=kUav
-----END PGP SIGNATURE-----
Merge tag 'x86-cleanups-2024-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Ingo Molnar:
- Change global variables to local
- Add missing kernel-doc function parameter descriptions
- Remove unused parameter from a macro
- Remove obsolete Kconfig entry
- Fix comments
- Fix typos, mostly scripted, manually reviewed
and a micro-optimization got misplaced as a cleanup:
- Micro-optimize the asm code in secondary_startup_64_no_verify()
* tag 'x86-cleanups-2024-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
arch/x86: Fix typos
x86/head_64: Use TESTB instead of TESTL in secondary_startup_64_no_verify()
x86/docs: Remove reference to syscall trampoline in PTI
x86/Kconfig: Remove obsolete config X86_32_SMP
x86/io: Remove the unused 'bw' parameter from the BUILDIO() macro
x86/mtrr: Document missing function parameters in kernel-doc
x86/setup: Make relocated_ramdisk a local variable of relocate_initrd()
When commit c59a1f106f ("KVM: x86/pmu: Add IA32_PEBS_ENABLE
MSR emulation for extended PEBS") switched the initialization of
cpuc->guest_switch_msrs to use compound literals, it screwed up
the boolean logic:
+ u64 pebs_mask = cpuc->pebs_enabled & x86_pmu.pebs_capable;
...
- arr[0].guest = intel_ctrl & ~cpuc->intel_ctrl_host_mask;
- arr[0].guest &= ~(cpuc->pebs_enabled & x86_pmu.pebs_capable);
+ .guest = intel_ctrl & (~cpuc->intel_ctrl_host_mask | ~pebs_mask),
Before the patch, the value of arr[0].guest would have been intel_ctrl &
~cpuc->intel_ctrl_host_mask & ~pebs_mask. The intent is to always treat
PEBS events as host-only because, while the guest runs, there is no way
to tell the processor about the virtual address where to put PEBS records
intended for the host.
Unfortunately, the new expression can be expanded to
(intel_ctrl & ~cpuc->intel_ctrl_host_mask) | (intel_ctrl & ~pebs_mask)
which makes no sense; it includes any bit that isn't *both* marked as
exclude_guest and using PEBS. So, reinstate the old logic. Another
way to write it could be "intel_ctrl & ~(cpuc->intel_ctrl_host_mask |
pebs_mask)", presumably the intention of the author of the faulty.
However, I personally find the repeated application of A AND NOT B to
be a bit more readable.
This shows up as guest failures when running concurrent long-running
perf workloads on the host, and was reported to happen with rcutorture.
All guests on a given host would die simultaneously with something like an
instruction fault or a segmentation violation.
Reported-by: Paul E. McKenney <paulmck@kernel.org>
Analyzed-by: Sean Christopherson <seanjc@google.com>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Cc: stable@vger.kernel.org
Fixes: c59a1f106f ("KVM: x86/pmu: Add IA32_PEBS_ENABLE MSR emulation for extended PEBS")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The same code is used for retrieving package ID procedure from GIDNIDMAP
register. Factor out topology_gidnid_map() to avoid code duplication.
Signed-off-by: Alexander Antonov <alexander.antonov@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20231127185246.2371939-3-alexander.antonov@linux.intel.com
Get logical socket id instead of physical id in discover_upi_topology()
to avoid out-of-bound access on 'upi = &type->topology[nid][idx];' line
that leads to NULL pointer dereference in upi_fill_topology()
Fixes: f680b6e606 ("perf/x86/intel/uncore: Enable UPI topology discovery for Icelake Server")
Reported-by: Kyle Meyer <kyle.meyer@hpe.com>
Signed-off-by: Alexander Antonov <alexander.antonov@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Kyle Meyer <kyle.meyer@hpe.com>
Link: https://lore.kernel.org/r/20231127185246.2371939-2-alexander.antonov@linux.intel.com
The same as Granite Rapids, the Sierra Forest and Grand Ridge also
supports the discovery table feature and the same type of the uncore
units. The difference of the available units and counters can be
retrieved from the discovery table automatically.
Just add the CPU model ID.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Ammy Yi <ammy.yi@intel.com>
Link: https://lore.kernel.org/r/20231117163939.2468007-5-kan.liang@linux.intel.com
The free-running counters for IIO uncore blocks on Granite Rapids are
similar to Sapphire Rapids. The key difference is the offset of the
registers. The number of the IIO uncore blocks can also be retrieved
from the discovery table.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Ammy Yi <ammy.yi@intel.com>
Link: https://lore.kernel.org/r/20231117163939.2468007-4-kan.liang@linux.intel.com
The same as Sapphire Rapids, Granite Rapids also supports the discovery
table feature. All the basic uncore PMON information can be retrieved
from the discovery table which resides in the BIOS.
There are 4 new units are added on Granite Rapids, b2cmi, b2cxl, ubox,
and mdf_sbo. The layout of the counters is exactly the same as the
generic uncore counters. Only add a name for the new units. All the
details can be retrieved from the discovery table.
The description of the new units can be found at
https://www.intel.com/content/www/us/en/secure/content-details/772943/content-details.html
The other units, e.g., cha, iio, irp, pcu, and imc, are the same as
Sapphire Rapids.
Ignore the upi and b2upi units in the discovery table, which are broken
for now.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Ammy Yi <ammy.yi@intel.com>
Link: https://lore.kernel.org/r/20231117163939.2468007-3-kan.liang@linux.intel.com
The current perf doesn't save the complete address of an uncore unit.
The complete address of each unit is calculated by the base address +
offset. The type of the base address is u64, while the type of offset is
unsigned.
In the old platforms (without the discovery table method), the base
address and offset are hard coded in the driver. Perf can always use the
lowest address as the base address. Everything works well.
In the new platforms (starting from SPR), the discovery table provides
a complete address for all uncore units. To follow the current
framework/codes, when parsing the discovery table, the complete address
of the first box is stored as a base address. The offset of the
following units is calculated by the complete address of the unit minus
the base address (the address of the first unit). On GNR, the latter
units may have a lower address compared to the first unit. So the offset
is a negative value. The upper 32 bits are lost when casting a negative
u64 to an unsigned type.
Use u64 to replace unsigned for the uncore offsets array to correct the
above case. There is no functional change.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Ammy Yi <ammy.yi@intel.com>
Link: https://lore.kernel.org/r/20231117163939.2468007-2-kan.liang@linux.intel.com
Factor out SPR_UNCORE_MMIO_COMMON_FORMAT which can be reused by
Granite Rapids in the following patch.
Granite Rapids have more uncore units than Sapphire Rapids. Add new
parameters to support adjustable uncore units.
No functional change.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Ammy Yi <ammy.yi@intel.com>
Link: https://lore.kernel.org/r/20231117163939.2468007-1-kan.liang@linux.intel.com
When running perf-stat command on Intel hybrid platform, perf-stat
reports the following errors:
sudo taskset -c 7 ./perf stat -vvvv -e cpu_atom/instructions/ sleep 1
Opening: cpu/cycles/:HG
------------------------------------------------------------
perf_event_attr:
type 0 (PERF_TYPE_HARDWARE)
config 0xa00000000
disabled 1
------------------------------------------------------------
sys_perf_event_open: pid 0 cpu -1 group_fd -1 flags 0x8
sys_perf_event_open failed, error -16
Performance counter stats for 'sleep 1':
<not counted> cpu_atom/instructions/
It looks the cpu_atom/instructions/ event can't be enabled on atom PMU
even when the process is pinned on atom core. Investigation shows that
exclusive_event_init() helper always returns -EBUSY error in the perf
event creation. That's strange since the atom PMU should not be an
exclusive PMU.
Further investigation shows the issue was introduced by commit:
97588df87b ("perf/x86/intel: Add common intel_pmu_init_hybrid()")
The commit originally intents to clear the bit PERF_PMU_CAP_AUX_OUTPUT
from PMU capabilities if intel_cap.pebs_output_pt_available is not set,
but it incorrectly uses 'or' operation and leads to all PMU capabilities
bits are set to 1 except bit PERF_PMU_CAP_AUX_OUTPUT.
Testing this fix on Intel hybrid platforms, the observed issues
disappear.
Fixes: 97588df87b ("perf/x86/intel: Add common intel_pmu_init_hybrid()")
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231121014628.729989-1-dapeng1.mi@linux.intel.com
The same as the Sierra Forest, the Grand Ridge supports core C1/C6 and
module C6. But it doesn't support pkg C6 residency counter.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231116142245.1233485-4-kan.liang@linux.intel.com
A new module C6 Residency Counter is introduced in the Sierra Forest.
The scope of the new counter is module (A cluster of cores shared L2
cache). Create a brand new cstate_module PMU to profile the new counter.
The only differences between the new cstate_module PMU and the existing
cstate PMU are the scope and events.
Regarding the choice of the new cstate_module PMU name, the current
naming rule of a cstate PMU is "cstate_" + the scope of the PMU. The
scope of the PMU is the cores shared L2. On SRF, Intel calls it
"module", while the internal Linux sched code calls it "cluster". The
"cstate_module" is used as the new PMU name, because
- The Cstate PMU driver is a Intel specific driver. It doesn't impact
other ARCHs. The name makes it consistent with the documentation.
- The "cluster" mainly be used by the scheduler developer, while the
user of cstate PMU is more likely a researcher reading HW docs and
optimizing power.
- In the Intel's SDM, the "cluster" has a different meaning/scope for
topology. Using it will mislead the end users.
Besides the module C6, the core C1/C6 and pkg C6 residency counters are
supported in the Sierra Forest as well.
Suggested-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231116142245.1233485-3-kan.liang@linux.intel.com
The events of the cstate_core and cstate_pkg PMU have the same format.
They both need to create a "events" group (with empty attrs). The
attr_groups can be shared.
Remove the dedicated attr_groups for each cstate PMU. Use the shared
cstate_attr_groups to replace.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231116142245.1233485-1-kan.liang@linux.intel.com
- Limit the hardcoded topology quirk for Hygon CPUs to those which have a
model ID less than 4. The newer models have the topology CPUID leaf 0xB
correctly implemented and are not affected.
- Make SMT control more robust against enumeration failures
SMT control was added to allow controlling SMT at boottime or
runtime. The primary purpose was to provide a simple mechanism to
disable SMT in the light of speculation attack vectors.
It turned out that the code is sensible to enumeration failures and
worked only by chance for XEN/PV. XEN/PV has no real APIC enumeration
which means the primary thread mask is not set up correctly. By chance
a XEN/PV boot ends up with smp_num_siblings == 2, which makes the
hotplug control stay at its default value "enabled". So the mask is
never evaluated.
The ongoing rework of the topology evaluation caused XEN/PV to end up
with smp_num_siblings == 1, which sets the SMT control to "not
supported" and the empty primary thread mask causes the hotplug core to
deny the bringup of the APS.
Make the decision logic more robust and take 'not supported' and 'not
implemented' into account for the decision whether a CPU should be
booted or not.
- Fake primary thread mask for XEN/PV
Pretend that all XEN/PV vCPUs are primary threads, which makes the
usage of the primary thread mask valid on XEN/PV. That is consistent
with because all of the topology information on XEN/PV is fake or even
non-existent.
- Encapsulate topology information in cpuinfo_x86
Move the randomly scattered topology data into a separate data
structure for readability and as a preparatory step for the topology
evaluation overhaul.
- Consolidate APIC ID data type to u32
It's fixed width hardware data and not randomly u16, int, unsigned long
or whatever developers decided to use.
- Cure the abuse of cpuinfo for persisting logical IDs.
Per CPU cpuinfo is used to persist the logical package and die
IDs. That's really not the right place simply because cpuinfo is
subject to be reinitialized when a CPU goes through an offline/online
cycle.
Use separate per CPU data for the persisting to enable the further
topology management rework. It will be removed once the new topology
management is in place.
- Provide a debug interface for inspecting topology information
Useful in general and extremly helpful for validating the topology
management rework in terms of correctness or "bug" compatibility.
-----BEGIN PGP SIGNATURE-----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=xrz8
-----END PGP SIGNATURE-----
Merge tag 'x86-core-2023-10-29-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 core updates from Thomas Gleixner:
- Limit the hardcoded topology quirk for Hygon CPUs to those which have
a model ID less than 4.
The newer models have the topology CPUID leaf 0xB correctly
implemented and are not affected.
- Make SMT control more robust against enumeration failures
SMT control was added to allow controlling SMT at boottime or
runtime. The primary purpose was to provide a simple mechanism to
disable SMT in the light of speculation attack vectors.
It turned out that the code is sensible to enumeration failures and
worked only by chance for XEN/PV. XEN/PV has no real APIC enumeration
which means the primary thread mask is not set up correctly. By
chance a XEN/PV boot ends up with smp_num_siblings == 2, which makes
the hotplug control stay at its default value "enabled". So the mask
is never evaluated.
The ongoing rework of the topology evaluation caused XEN/PV to end up
with smp_num_siblings == 1, which sets the SMT control to "not
supported" and the empty primary thread mask causes the hotplug core
to deny the bringup of the APS.
Make the decision logic more robust and take 'not supported' and 'not
implemented' into account for the decision whether a CPU should be
booted or not.
- Fake primary thread mask for XEN/PV
Pretend that all XEN/PV vCPUs are primary threads, which makes the
usage of the primary thread mask valid on XEN/PV. That is consistent
with because all of the topology information on XEN/PV is fake or
even non-existent.
- Encapsulate topology information in cpuinfo_x86
Move the randomly scattered topology data into a separate data
structure for readability and as a preparatory step for the topology
evaluation overhaul.
- Consolidate APIC ID data type to u32
It's fixed width hardware data and not randomly u16, int, unsigned
long or whatever developers decided to use.
- Cure the abuse of cpuinfo for persisting logical IDs.
Per CPU cpuinfo is used to persist the logical package and die IDs.
That's really not the right place simply because cpuinfo is subject
to be reinitialized when a CPU goes through an offline/online cycle.
Use separate per CPU data for the persisting to enable the further
topology management rework. It will be removed once the new topology
management is in place.
- Provide a debug interface for inspecting topology information
Useful in general and extremly helpful for validating the topology
management rework in terms of correctness or "bug" compatibility.
* tag 'x86-core-2023-10-29-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
x86/apic, x86/hyperv: Use u32 in hv_snp_boot_ap() too
x86/cpu: Provide debug interface
x86/cpu/topology: Cure the abuse of cpuinfo for persisting logical ids
x86/apic: Use u32 for wakeup_secondary_cpu[_64]()
x86/apic: Use u32 for [gs]et_apic_id()
x86/apic: Use u32 for phys_pkg_id()
x86/apic: Use u32 for cpu_present_to_apicid()
x86/apic: Use u32 for check_apicid_used()
x86/apic: Use u32 for APIC IDs in global data
x86/apic: Use BAD_APICID consistently
x86/cpu: Move cpu_l[l2]c_id into topology info
x86/cpu: Move logical package and die IDs into topology info
x86/cpu: Remove pointless evaluation of x86_coreid_bits
x86/cpu: Move cu_id into topology info
x86/cpu: Move cpu_core_id into topology info
hwmon: (fam15h_power) Use topology_core_id()
scsi: lpfc: Use topology_core_id()
x86/cpu: Move cpu_die_id into topology info
x86/cpu: Move phys_proc_id into topology info
x86/cpu: Encapsulate topology information in cpuinfo_x86
...
The branch counters logging (A.K.A LBR event logging) introduces a
per-counter indication of precise event occurrences in LBRs. It can
provide a means to attribute exposed retirement latency to combinations
of events across a block of instructions. It also provides a means of
attributing Timed LBR latencies to events.
The feature is first introduced on SRF/GRR. It is an enhancement of the
ARCH LBR. It adds new fields in the LBR_INFO MSRs to log the occurrences
of events on the GP counters. The information is displayed by the order
of counters.
The design proposed in this patch requires that the events which are
logged must be in a group with the event that has LBR. If there are
more than one LBR group, the counters logging information only from the
current group (overflowed) are stored for the perf tool, otherwise the
perf tool cannot know which and when other groups are scheduled
especially when multiplexing is triggered. The user can ensure it uses
the maximum number of counters that support LBR info (4 by now) by
making the group large enough.
The HW only logs events by the order of counters. The order may be
different from the order of enabling which the perf tool can understand.
When parsing the information of each branch entry, convert the counter
order to the enabled order, and store the enabled order in the extension
space.
Unconditionally reset LBRs for an LBR event group when it's deleted. The
logged counter information is only valid for the current LBR group. If
another LBR group is scheduled later, the information from the stale
LBRs would be otherwise wrongly interpreted.
Add a sanity check in intel_pmu_hw_config(). Disable the feature if other
counter filters (inv, cmask, edge, in_tx) are set or LBR call stack mode
is enabled. (For the LBR call stack mode, we cannot simply flush the
LBR, since it will break the call stack. Also, there is no obvious usage
with the call stack mode for now.)
Only applying the PERF_SAMPLE_BRANCH_COUNTERS doesn't require any branch
stack setup.
Expose the maximum number of supported counters and the width of the
counters into the sysfs. The perf tool can use the information to parse
the logged counters in each branch.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20231025201626.3000228-5-kan.liang@linux.intel.com
Some attrs and is_visible implementations are rather far away from one
another which makes the whole thing hard to interpret.
There are only two attribute groups which have both .attrs and
.is_visible, group_default and group_caps_lbr. Move them together.
No functional changes.
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20231025201626.3000228-4-kan.liang@linux.intel.com
Currently, branch_sample_type !=0 is used to check whether a branch
stack setup is required. But it doesn't check the sample type,
unnecessary branch stack setup may be done for a counting event. E.g.,
perf record -e "{branch-instructions,branch-misses}:S" -j any
Also, the event only with the new PERF_SAMPLE_BRANCH_COUNTERS branch
sample type may not require a branch stack setup either.
Add a new flag NEEDS_BRANCH_STACK to indicate whether the event requires
a branch stack setup. Replace the needs_branch_stack() by checking the
new flag.
The counting event check is implemented here. The later patch will take
the new PERF_SAMPLE_BRANCH_COUNTERS into account.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20231025201626.3000228-2-kan.liang@linux.intel.com
Currently, the additional information of a branch entry is stored in a
u64 space. With more and more information added, the space is running
out. For example, the information of occurrences of events will be added
for each branch.
Two places were suggested to append the counters.
https://lore.kernel.org/lkml/20230802215814.GH231007@hirez.programming.kicks-ass.net/
One place is right after the flags of each branch entry. It changes the
existing struct perf_branch_entry. The later ARCH specific
implementation has to be really careful to consistently pick
the right struct.
The other place is right after the entire struct perf_branch_stack.
The disadvantage is that the pointer of the extra space has to be
recorded. The common interface perf_sample_save_brstack() has to be
updated.
The latter is much straightforward, and should be easily understood and
maintained. It is implemented in the patch.
Add a new branch sample type, PERF_SAMPLE_BRANCH_COUNTERS, to indicate
the event which is recorded in the branch info.
The "u64 counters" may store the occurrences of several events. The
information regarding the number of events/counters and the width of
each counter should be exposed via sysfs as a reference for the perf
tool. Define the branch_counter_nr and branch_counter_width ABI here.
The support will be implemented later in the Intel-specific patch.
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20231025201626.3000228-1-kan.liang@linux.intel.com
Yet another topology related data pair. Rename logical_proc_id to
logical_pkg_id so it fits the common naming conventions.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230814085112.745139505@linutronix.de
The MSR registers for reading the package residency counters are
available on every CPU of the package. To avoid doing unnecessary SMP
calls to read the values for these from the various CPUs inside a
package, allow reading them from any CPU of the package.
Suggested-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20230912124432.3616761-2-tero.kristo@linux.intel.com
Some parameters or return codes were either wrong or missing,
update them.
Signed-off-by: Lucy Mielke <lucymielke@icloud.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/ZSOjQW3e2nJR4bAo@fedora.fritz.box
The current ref-cycles event is only available on the fixed counter 2.
Starting from the GLC and GRT core, the architectural UnHalted Reference
Cycles event (0x013c) which is available on general-purpose counters
can collect the exact same events as the fixed counter 2.
Update the mapping of ref-cycles to 0x013c. So the ref-cycles can be
available on both fixed counter 2 and general-purpose counters.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230911144139.2354015-1-kan.liang@linux.intel.com
Unnecessary multiplexing is triggered when running an "instructions"
event on an MTL.
perf stat -e cpu_core/instructions/,cpu_core/instructions/ -a sleep 1
Performance counter stats for 'system wide':
115,489,000 cpu_core/instructions/ (50.02%)
127,433,777 cpu_core/instructions/ (49.98%)
1.002294504 seconds time elapsed
Linux architectural perf events, e.g., cycles and instructions, usually
have dedicated fixed counters. These events also have equivalent events
which can be used in the general-purpose counters. The counters are
precious. In the intel_pmu_check_event_constraints(), perf check/extend
the event constraints of these events. So these events can utilize both
fixed counters and general-purpose counters.
The following cleanup commit:
97588df87b ("perf/x86/intel: Add common intel_pmu_init_hybrid()")
forgot adding the intel_pmu_check_event_constraints() into update_pmu_cap().
The architectural perf events cannot utilize the general-purpose counters.
The code to check and update the counters, event constraints and
extra_regs is the same among hybrid systems. Move
intel_pmu_check_hybrid_pmus() to init_hybrid_pmu(), and
emove the duplicate check in update_pmu_cap().
Fixes: 97588df87b ("perf/x86/intel: Add common intel_pmu_init_hybrid()")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230911135128.2322833-1-kan.liang@linux.intel.com
Starting from SPR, the basic uncore PMON information is retrieved from
the discovery table (resides in an MMIO space populated by BIOS). It is
called the discovery method. The existing value of the type->num_boxes
is from the discovery table.
On some SPR variants, there is a firmware bug that makes the value from the
discovery table incorrect. We use the value from the
SPR_MSR_UNC_CBO_CONFIG MSR to replace the one from the discovery table:
38776cc45e ("perf/x86/uncore: Correct the number of CHAs on SPR")
Unfortunately, the SPR_MSR_UNC_CBO_CONFIG isn't available for the EMR
XCC (Always returns 0), but the above firmware bug doesn't impact the
EMR XCC.
Don't let the value from the MSR replace the existing value from the
discovery table.
Fixes: 38776cc45e ("perf/x86/uncore: Correct the number of CHAs on SPR")
Reported-by: Stephane Eranian <eranian@google.com>
Reported-by: Yunying Sun <yunying.sun@intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Yunying Sun <yunying.sun@intel.com>
Link: https://lore.kernel.org/r/20230905134248.496114-1-kan.liang@linux.intel.com
The current hybrid initialization codes aren't well organized and are
hard to read.
Factor out intel_pmu_init_hybrid() to do a common setup for each
hybrid PMU. The PMU-specific capability will be updated later via either
hard code (ADL) or CPUID hybrid enumeration (MTL).
Splitting the ADL and MTL initialization codes, since they have
different uarches. The hard code PMU capabilities are not required for
MTL either. They can be enumerated by the new leaf 0x23 and
IA32_PERF_CAPABILITIES MSR.
The hybrid enumeration of the IA32_PERF_CAPABILITIES MSR is broken on
MTL. Using the default value.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230829125806.3016082-7-kan.liang@linux.intel.com
There is a fairly long list of grievances about the current code. The
main beefs:
1. hybrid_big_small assumes that the *HARDWARE* (CPUID) provided
core types are a bitmap. They are not. If Intel happened to
make a core type of 0xff, hilarity would ensue.
2. adl_get_hybrid_cpu_type() utterly inscrutable. There are
precisely zero comments and zero changelog about what it is
attempting to do.
According to Kan, the adl_get_hybrid_cpu_type() is there because some
Alder Lake (ADL) CPUs can do some silly things. Some ADL models are
*supposed* to be hybrid CPUs with big and little cores, but there are
some SKUs that only have big cores. CPUID(0x1a) on those CPUs does
not say that the CPUs are big cores. It apparently just returns 0x0.
It confuses perf because it expects to see either 0x40 (Core) or
0x20 (Atom).
The perf workaround for this is to watch for a CPU core saying it is
type 0x0. If that happens on an Alder Lake, it calls
x86_pmu.get_hybrid_cpu_type() and just assumes that the core is a
Core (0x40) CPU.
To fix up the mess, separate out the CPU types and the 'pmu' types.
This allows 'hybrid_pmu_type' bitmaps without worrying that some
future CPU type will set multiple bits.
Since the types are now separate, add a function to glue them back
together again. Actual comment on the situation in the glue
function (find_hybrid_pmu_for_cpu()).
Also, give ->get_hybrid_cpu_type() a real return type and make it
clear that it is overriding the *CPU* type, not the PMU type.
Rename cpu_type to pmu_type in the struct x86_hybrid_pmu to reflect the
change.
Originally-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230829125806.3016082-6-kan.liang@linux.intel.com
Use the intel_pmu_init_glc() and intel_pmu_init_grt() to replace the
duplicate code for ADL.
The current code already checks the PERF_X86_EVENT_TOPDOWN flag before
invoking the Topdown metrics functions. (The PERF_X86_EVENT_TOPDOWN flag
is to indicate the Topdown metric feature, which is only available for
the p-core.) Drop the unnecessary adl_set_topdown_event_period() and
adl_update_topdown_event().
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230829125806.3016082-5-kan.liang@linux.intel.com
From PMU's perspective, the ADL e-core and newer SRF/GRR have a similar
uarch. Most of the initialization code can be shared.
Factor out intel_pmu_init_grt() for the common initialization code.
The common part of the ADL e-core will be replaced by the later patch.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230829125806.3016082-4-kan.liang@linux.intel.com
The SPR and ADL p-core have a similar uarch. Most of the initialization
code can be shared.
Factor out intel_pmu_init_glc() for the common initialization code.
The common part of the ADL p-core will be replaced by the later patch.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230829125806.3016082-3-kan.liang@linux.intel.com
From PMU's perspective, the SPR/GNR server has a similar uarch to the
ADL/MTL client p-core. Many functions are shared. However, the shared
function name uses the abbreviation of the server product code name,
rather than the common uarch code name.
Rename these internal shared functions by the common uarch name.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230829125806.3016082-2-kan.liang@linux.intel.com
The Grand Ridge and Sierra Forest are successors to Snow Ridge. They
both have Crestmont core. From the core PMU's perspective, they are
similar to the e-core of MTL. The only difference is the LBR event
logging feature, which will be implemented in the following patches.
Create a non-hybrid PMU setup for Grand Ridge and Sierra Forest.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Link: https://lore.kernel.org/r/20230522113040.2329924-1-kan.liang@linux.intel.com
Alderlake N is an E-core only product using Gracemont
micro-architecture. It fits the pre-existing naming scheme perfectly
fine, adhere to it.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230807150405.686834933@infradead.org
Use local64_try_cmpxchg instead of local64_cmpxchg (*ptr, old, new) == old.
x86 CMPXCHG instruction returns success in ZF flag, so this change saves a
compare after cmpxchg (and related move instruction in front of cmpxchg).
Also, try_cmpxchg implicitly assigns old *ptr value to "old" when cmpxchg
fails. There is no need to re-read the value in the loop.
No functional change intended.
Cc. "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20230706141720.2672-1-ubizjak@gmail.com
On SPR, the load latency event needs an auxiliary event in the same
group to work properly. There's a check in intel_pmu_hw_config()
for this to iterate sibling events and find a mem-loads-aux event.
The for_each_sibling_event() has a lockdep assert to make sure if it
disabled hardirq or hold leader->ctx->mutex. This works well if the
given event has a separate leader event since perf_try_init_event()
grabs the leader->ctx->mutex to protect the sibling list. But it can
cause a problem when the event itself is a leader since the event is
not initialized yet and there's no ctx for the event.
Actually I got a lockdep warning when I run the below command on SPR,
but I guess it could be a NULL pointer dereference.
$ perf record -d -e cpu/mem-loads/uP true
The code path to the warning is:
sys_perf_event_open()
perf_event_alloc()
perf_init_event()
perf_try_init_event()
x86_pmu_event_init()
hsw_hw_config()
intel_pmu_hw_config()
for_each_sibling_event()
lockdep_assert_event_ctx()
We don't need for_each_sibling_event() when it's a standalone event.
Let's return the error code directly.
Fixes: f3c0eba287 ("perf: Add a few assertions")
Reported-by: Greg Thelen <gthelen@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20230704181516.3293665-1-namhyung@kernel.org
- Rework & fix the event forwarding logic by extending the
core interface. This fixes AMD PMU events that have to
be forwarded from the core PMU to the IBS PMU.
- Add self-tests to test AMD IBS invocation via core PMU events
- Clean up Intel FixCntrCtl MSR encoding & handling
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=xn05
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf events updates from Ingo Molnar:
- Rework & fix the event forwarding logic by extending the core
interface.
This fixes AMD PMU events that have to be forwarded from the
core PMU to the IBS PMU.
- Add self-tests to test AMD IBS invocation via core PMU events
- Clean up Intel FixCntrCtl MSR encoding & handling
* tag 'perf-core-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Re-instate the linear PMU search
perf/x86/intel: Define bit macros for FixCntrCtl MSR
perf test: Add selftest to test IBS invocation via core pmu events
perf/core: Remove pmu linear searching code
perf/ibs: Fix interface via core pmu events
perf/core: Rework forwarding of {task|cpu}-clock events
When counting a FRONTEND event, the MSR_PEBS_FRONTEND is not correctly
set on GNR and MTL p-core.
The umask value for the FRONTEND events is changed on GNR and MTL. The
new umask is missing in the extra_regs[] table.
Add a dedicated intel_gnr_extra_regs[] for GNR and MTL p-core.
Fixes: bc4000fdb0 ("perf/x86/intel: Add Granite Rapids")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20230615173242.3726364-1-kan.liang@linux.intel.com
The number of CHAs from the discovery table on some SPR variants is
incorrect, because of a firmware issue. An accurate number can be read
from the MSR UNC_CBO_CONFIG.
Fixes: 949b11381f ("perf/x86/intel/uncore: Add Sapphire Rapids server CHA support")
Reported-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Stephane Eranian <eranian@google.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230508140206.283708-1-kan.liang@linux.intel.com
After commit b752ea0c28 ("perf/x86/intel/ds: Flush PEBS DS when changing
PEBS_DATA_CFG"), the cpuc->pebs_data_cfg may save some bits that are not
supported by real hardware, such as PEBS_UPDATE_DS_SW. This would cause
the VMX hardware MSR switching mechanism to save/restore invalid values
for PEBS_DATA_CFG MSR, thus crashing the host when PEBS is used for guest.
Fix it by using the active host value from cpuc->active_pebs_data_cfg.
Fixes: b752ea0c28 ("perf/x86/intel/ds: Flush PEBS DS when changing PEBS_DATA_CFG")
Signed-off-by: Like Xu <likexu@tencent.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20230517133808.67885-1-likexu@tencent.com
Define bit macros for FixCntrCtl MSR and replace the bit hardcoding
with these bit macros. This would make code be more human-readable.
Perf commands 'perf stat -e "instructions,cycles,ref-cycles"' and
'perf record -e "instructions,cycles,ref-cycles"' pass.
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20230504072128.3653470-1-dapeng1.mi@linux.intel.com
Several similar kernel warnings can be triggered,
[56605.607840] CPU0 PEBS record size 0, expected 32, config 0 cpuc->record_size=208
when the below commands are running in parallel for a while on SPR.
while true;
do
perf record --no-buildid -a --intr-regs=AX \
-e cpu/event=0xd0,umask=0x81/pp \
-c 10003 -o /dev/null ./triad;
done &
while true;
do
perf record -o /tmp/out -W -d \
-e '{ld_blocks.store_forward:period=1000000, \
MEM_TRANS_RETIRED.LOAD_LATENCY:u:precise=2:ldlat=4}' \
-c 1037 ./triad;
done
The triad program is just the generation of loads/stores.
The warnings are triggered when an unexpected PEBS record (with a
different config and size) is found.
A system-wide PEBS event with the large PEBS config may be enabled
during a context switch. Some PEBS records for the system-wide PEBS
may be generated while the old task is sched out but the new one
hasn't been sched in yet. When the new task is sched in, the
cpuc->pebs_record_size may be updated for the per-task PEBS events. So
the existing system-wide PEBS records have a different size from the
later PEBS records.
The PEBS buffer should be flushed right before the hardware is
reprogrammed. The new size and threshold should be updated after the
old buffer has been flushed.
Reported-by: Stephane Eranian <eranian@google.com>
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20230421184529.3320912-1-kan.liang@linux.intel.com
Add missing clockticks and cas_count_* events for Intel SapphireRapids IMC
PMU. These events are useful to measure memory bandwidth.
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20230419214241.2310385-1-eranian@google.com
Granite Rapids Xeon is successor or Emerald Rapids Xeon, and it will use
the same C-state residency counters as Emerald Rapids (and previous
Xeons, all the way back to Ice Lake Xeon).
Add Granite Rapids Xeon support.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230314170041.2967712-3-kan.liang@linux.intel.com
From core PMU's perspective, Granite Rapids is similar to the Sapphire
Rapids. The key differences include:
- Doesn't need the AUX event workaround for the mem load event.
(Implement in this patch).
- Support Retire Latency (Has been implemented in the commit
c87a31093c ("perf/x86: Support Retire Latency"))
- The event list, which will be supported in the perf tool later.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230314170041.2967712-1-kan.liang@linux.intel.com
- Provide a virtual cache topology to the guest to avoid
inconsistencies with migration on heterogenous systems. Non secure
software has no practical need to traverse the caches by set/way in
the first place.
- Add support for taking stage-2 access faults in parallel. This was an
accidental omission in the original parallel faults implementation,
but should provide a marginal improvement to machines w/o FEAT_HAFDBS
(such as hardware from the fruit company).
- A preamble to adding support for nested virtualization to KVM,
including vEL2 register state, rudimentary nested exception handling
and masking unsupported features for nested guests.
- Fixes to the PSCI relay that avoid an unexpected host SVE trap when
resuming a CPU when running pKVM.
- VGIC maintenance interrupt support for the AIC
- Improvements to the arch timer emulation, primarily aimed at reducing
the trap overhead of running nested.
- Add CONFIG_USERFAULTFD to the KVM selftests config fragment in the
interest of CI systems.
- Avoid VM-wide stop-the-world operations when a vCPU accesses its own
redistributor.
- Serialize when toggling CPACR_EL1.SMEN to avoid unexpected exceptions
in the host.
- Aesthetic and comment/kerneldoc fixes
- Drop the vestiges of the old Columbia mailing list and add [Oliver]
as co-maintainer
This also drags in arm64's 'for-next/sme2' branch, because both it and
the PSCI relay changes touch the EL2 initialization code.
RISC-V:
- Fix wrong usage of PGDIR_SIZE instead of PUD_SIZE
- Correctly place the guest in S-mode after redirecting a trap to the guest
- Redirect illegal instruction traps to guest
- SBI PMU support for guest
s390:
- Two patches sorting out confusion between virtual and physical
addresses, which currently are the same on s390.
- A new ioctl that performs cmpxchg on guest memory
- A few fixes
x86:
- Change tdp_mmu to a read-only parameter
- Separate TDP and shadow MMU page fault paths
- Enable Hyper-V invariant TSC control
- Fix a variety of APICv and AVIC bugs, some of them real-world,
some of them affecting architecurally legal but unlikely to
happen in practice
- Mark APIC timer as expired if its in one-shot mode and the count
underflows while the vCPU task was being migrated
- Advertise support for Intel's new fast REP string features
- Fix a double-shootdown issue in the emergency reboot code
- Ensure GIF=1 and disable SVM during an emergency reboot, i.e. give SVM
similar treatment to VMX
- Update Xen's TSC info CPUID sub-leaves as appropriate
- Add support for Hyper-V's extended hypercalls, where "support" at this
point is just forwarding the hypercalls to userspace
- Clean up the kvm->lock vs. kvm->srcu sequences when updating the PMU and
MSR filters
- One-off fixes and cleanups
- Fix and cleanup the range-based TLB flushing code, used when KVM is
running on Hyper-V
- Add support for filtering PMU events using a mask. If userspace
wants to restrict heavily what events the guest can use, it can now
do so without needing an absurd number of filter entries
- Clean up KVM's handling of "PMU MSRs to save", especially when vPMU
support is disabled
- Add PEBS support for Intel Sapphire Rapids
- Fix a mostly benign overflow bug in SEV's send|receive_update_data()
- Move several SVM-specific flags into vcpu_svm
x86 Intel:
- Handle NMI VM-Exits before leaving the noinstr region
- A few trivial cleanups in the VM-Enter flows
- Stop enabling VMFUNC for L1 purely to document that KVM doesn't support
EPTP switching (or any other VM function) for L1
- Fix a crash when using eVMCS's enlighted MSR bitmaps
Generic:
- Clean up the hardware enable and initialization flow, which was
scattered around multiple arch-specific hooks. Instead, just
let the arch code call into generic code. Both x86 and ARM should
benefit from not having to fight common KVM code's notion of how
to do initialization.
- Account allocations in generic kvm_arch_alloc_vm()
- Fix a memory leak if coalesced MMIO unregistration fails
selftests:
- On x86, cache the CPU vendor (AMD vs. Intel) and use the info to emit
the correct hypercall instruction instead of relying on KVM to patch
in VMMCALL
- Use TAP interface for kvm_binary_stats_test and tsc_msrs_test
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmP2YA0UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPg/Qf+J6nT+TkIa+8Ei+fN1oMTDp4YuIOx
mXvJ9mRK9sQ+tAUVwvDz3qN/fK5mjsYbRHIDlVc5p2Q3bCrVGDDqXPFfCcLx1u+O
9U9xjkO4JxD2LS9pc70FYOyzVNeJ8VMGOBbC2b0lkdYZ4KnUc6e/WWFKJs96bK+H
duo+RIVyaMthnvbTwSv1K3qQb61n6lSJXplywS8KWFK6NZAmBiEFDAWGRYQE9lLs
VcVcG0iDJNL/BQJ5InKCcvXVGskcCm9erDszPo7w4Bypa4S9AMS42DHUaRZrBJwV
/WqdH7ckIz7+OSV0W1j+bKTHAFVTCjXYOM7wQykgjawjICzMSnnG9Gpskw==
=goe1
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- Provide a virtual cache topology to the guest to avoid
inconsistencies with migration on heterogenous systems. Non secure
software has no practical need to traverse the caches by set/way in
the first place
- Add support for taking stage-2 access faults in parallel. This was
an accidental omission in the original parallel faults
implementation, but should provide a marginal improvement to
machines w/o FEAT_HAFDBS (such as hardware from the fruit company)
- A preamble to adding support for nested virtualization to KVM,
including vEL2 register state, rudimentary nested exception
handling and masking unsupported features for nested guests
- Fixes to the PSCI relay that avoid an unexpected host SVE trap when
resuming a CPU when running pKVM
- VGIC maintenance interrupt support for the AIC
- Improvements to the arch timer emulation, primarily aimed at
reducing the trap overhead of running nested
- Add CONFIG_USERFAULTFD to the KVM selftests config fragment in the
interest of CI systems
- Avoid VM-wide stop-the-world operations when a vCPU accesses its
own redistributor
- Serialize when toggling CPACR_EL1.SMEN to avoid unexpected
exceptions in the host
- Aesthetic and comment/kerneldoc fixes
- Drop the vestiges of the old Columbia mailing list and add [Oliver]
as co-maintainer
RISC-V:
- Fix wrong usage of PGDIR_SIZE instead of PUD_SIZE
- Correctly place the guest in S-mode after redirecting a trap to the
guest
- Redirect illegal instruction traps to guest
- SBI PMU support for guest
s390:
- Sort out confusion between virtual and physical addresses, which
currently are the same on s390
- A new ioctl that performs cmpxchg on guest memory
- A few fixes
x86:
- Change tdp_mmu to a read-only parameter
- Separate TDP and shadow MMU page fault paths
- Enable Hyper-V invariant TSC control
- Fix a variety of APICv and AVIC bugs, some of them real-world, some
of them affecting architecurally legal but unlikely to happen in
practice
- Mark APIC timer as expired if its in one-shot mode and the count
underflows while the vCPU task was being migrated
- Advertise support for Intel's new fast REP string features
- Fix a double-shootdown issue in the emergency reboot code
- Ensure GIF=1 and disable SVM during an emergency reboot, i.e. give
SVM similar treatment to VMX
- Update Xen's TSC info CPUID sub-leaves as appropriate
- Add support for Hyper-V's extended hypercalls, where "support" at
this point is just forwarding the hypercalls to userspace
- Clean up the kvm->lock vs. kvm->srcu sequences when updating the
PMU and MSR filters
- One-off fixes and cleanups
- Fix and cleanup the range-based TLB flushing code, used when KVM is
running on Hyper-V
- Add support for filtering PMU events using a mask. If userspace
wants to restrict heavily what events the guest can use, it can now
do so without needing an absurd number of filter entries
- Clean up KVM's handling of "PMU MSRs to save", especially when vPMU
support is disabled
- Add PEBS support for Intel Sapphire Rapids
- Fix a mostly benign overflow bug in SEV's
send|receive_update_data()
- Move several SVM-specific flags into vcpu_svm
x86 Intel:
- Handle NMI VM-Exits before leaving the noinstr region
- A few trivial cleanups in the VM-Enter flows
- Stop enabling VMFUNC for L1 purely to document that KVM doesn't
support EPTP switching (or any other VM function) for L1
- Fix a crash when using eVMCS's enlighted MSR bitmaps
Generic:
- Clean up the hardware enable and initialization flow, which was
scattered around multiple arch-specific hooks. Instead, just let
the arch code call into generic code. Both x86 and ARM should
benefit from not having to fight common KVM code's notion of how to
do initialization
- Account allocations in generic kvm_arch_alloc_vm()
- Fix a memory leak if coalesced MMIO unregistration fails
selftests:
- On x86, cache the CPU vendor (AMD vs. Intel) and use the info to
emit the correct hypercall instruction instead of relying on KVM to
patch in VMMCALL
- Use TAP interface for kvm_binary_stats_test and tsc_msrs_test"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (325 commits)
KVM: SVM: hyper-v: placate modpost section mismatch error
KVM: x86/mmu: Make tdp_mmu_allowed static
KVM: arm64: nv: Use reg_to_encoding() to get sysreg ID
KVM: arm64: nv: Only toggle cache for virtual EL2 when SCTLR_EL2 changes
KVM: arm64: nv: Filter out unsupported features from ID regs
KVM: arm64: nv: Emulate EL12 register accesses from the virtual EL2
KVM: arm64: nv: Allow a sysreg to be hidden from userspace only
KVM: arm64: nv: Emulate PSTATE.M for a guest hypervisor
KVM: arm64: nv: Add accessors for SPSR_EL1, ELR_EL1 and VBAR_EL1 from virtual EL2
KVM: arm64: nv: Handle SMCs taken from virtual EL2
KVM: arm64: nv: Handle trapped ERET from virtual EL2
KVM: arm64: nv: Inject HVC exceptions to the virtual EL2
KVM: arm64: nv: Support virtual EL2 exceptions
KVM: arm64: nv: Handle HCR_EL2.NV system register traps
KVM: arm64: nv: Add nested virt VCPU primitives for vEL2 VCPU state
KVM: arm64: nv: Add EL2 system registers to vcpu context
KVM: arm64: nv: Allow userspace to set PSR_MODE_EL2x
KVM: arm64: nv: Reset VCPU to EL2 registers if VCPU nested virt is set
KVM: arm64: nv: Introduce nested virtualization VCPU feature
KVM: arm64: Use the S2 MMU context to iterate over S2 table
...
- Optimize perf_sample_data layout
- Prepare sample data handling for BPF integration
- Update the x86 PMU driver for Intel Meteor Lake
- Restructure the x86 uncore code to fix a SPR (Sapphire Rapids)
discovery breakage
- Fix the x86 Zhaoxin PMU driver
- Cleanups
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ztUT
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
- Optimize perf_sample_data layout
- Prepare sample data handling for BPF integration
- Update the x86 PMU driver for Intel Meteor Lake
- Restructure the x86 uncore code to fix a SPR (Sapphire Rapids)
discovery breakage
- Fix the x86 Zhaoxin PMU driver
- Cleanups
* tag 'perf-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
perf/x86/intel/uncore: Add Meteor Lake support
x86/perf/zhaoxin: Add stepping check for ZXC
perf/x86/intel/ds: Fix the conversion from TSC to perf time
perf/x86/uncore: Don't WARN_ON_ONCE() for a broken discovery table
perf/x86/uncore: Add a quirk for UPI on SPR
perf/x86/uncore: Ignore broken units in discovery table
perf/x86/uncore: Fix potential NULL pointer in uncore_get_alias_name
perf/x86/uncore: Factor out uncore_device_to_die()
perf/core: Call perf_prepare_sample() before running BPF
perf/core: Introduce perf_prepare_header()
perf/core: Do not pass header for sample ID init
perf/core: Set data->sample_flags in perf_prepare_sample()
perf/core: Add perf_sample_save_brstack() helper
perf/core: Add perf_sample_save_raw_data() helper
perf/core: Add perf_sample_save_callchain() helper
perf/core: Save the dynamic parts of sample data size
x86/kprobes: Use switch-case for 0xFF opcodes in prepare_emulation
perf/core: Change the layout of perf_sample_data
perf/x86/msr: Add Meteor Lake support
perf/x86/cstate: Add Meteor Lake support
...
The uncore subsystem for Meteor Lake is similar to the previous Alder
Lake. The main difference is that MTL provides PMU support for different
tiles, while ADL only provides PMU support for the whole package. On
ADL, there are CBOX, ARB, and clockbox uncore PMON units. On MTL, they
are split into CBOX/HAC_CBOX, ARB/HAC_ARB, and cncu/sncu which provides
a fixed counter for clockticks. Also, new MSR addresses are introduced
on MTL.
The IMC uncore PMON is the same as Alder Lake. Add new PCIIDs of IMC for
Meteor Lake.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230210190238.1726237-1-kan.liang@linux.intel.com
The time order is incorrect when the TSC in a PEBS record is used.
$perf record -e cycles:upp dd if=/dev/zero of=/dev/null
count=10000
$ perf script --show-task-events
perf-exec 0 0.000000: PERF_RECORD_COMM: perf-exec:915/915
dd 915 106.479872: PERF_RECORD_COMM exec: dd:915/915
dd 915 106.483270: PERF_RECORD_EXIT(915:915):(914:914)
dd 915 106.512429: 1 cycles:upp:
ffffffff96c011b7 [unknown] ([unknown])
... ...
The perf time is from sched_clock_cpu(). The current PEBS code
unconditionally convert the TSC to native_sched_clock(). There is a
shift between the two clocks. If the TSC is stable, the shift is
consistent, __sched_clock_offset. If the TSC is unstable, the shift has
to be calculated at runtime.
This patch doesn't support the conversion when the TSC is unstable. The
TSC unstable case is a corner case and very unlikely to happen. If it
happens, the TSC in a PEBS record will be dropped and fall back to
perf_event_clock().
Fixes: 47a3aeb39e ("perf/x86/intel/pebs: Fix PEBS timestamps overwritten")
Reported-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/CAM9d7cgWDVAq8-11RbJ2uGfwkKD6fA-OMwOKDrNUrU_=8MgEjg@mail.gmail.com/
According to Intel SDM, the EPT-friendly PEBS is supported by all the
platforms after ICX, ADL and the future platforms with PEBS format 5.
Currently the only in-kernel user of this capability is KVM, which has
very limited support for hybrid core pmu, so ADL and its successors do
not currently expose this capability. When both hybrid core and PEBS
format 5 are present, KVM will decide on its own merits.
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-perf-users@vger.kernel.org
Suggested-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Like Xu <likexu@tencent.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221109082802.27543-4-likexu@tencent.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
The kernel warning message is triggered, when SPR MCC is used.
[ 17.945331] ------------[ cut here ]------------
[ 17.946305] WARNING: CPU: 65 PID: 1 at
arch/x86/events/intel/uncore_discovery.c:184
intel_uncore_has_discovery_tables+0x4c0/0x65c
[ 17.946305] Modules linked in:
[ 17.946305] CPU: 65 PID: 1 Comm: swapper/0 Not tainted
5.4.17-2136.313.1-X10-2c+ #4
It's caused by the broken discovery table of UPI.
The discovery tables are from hardware. Except for dropping the broken
information, there is nothing Linux can do. Using WARN_ON_ONCE() is
overkilled.
Use the pr_info() to replace WARN_ON_ONCE(), and specify what uncore unit
is dropped and the reason.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Petlan <mpetlan@redhat.com>
Link: https://lore.kernel.org/r/20230112200105.733466-6-kan.liang@linux.intel.com
The discovery table of UPI on some SPR variants, e.g., MCC, is broken.
The third UPI table may includes a wrong address which points to a
non-exists device. The bug impacts both UPI and M3UPI uncore PMON.
Use a pre-defined UPI and M3UPI table to replace the broken table.
Different BIOS may populate a device into a different domain or a
different BUS. The accurate location can only be retrieved at load time.
Add spr_update_device_location() to update the location of the UPI and
M3UPI in the pre-defined table.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Petlan <mpetlan@redhat.com>
Link: https://lore.kernel.org/r/20230112200105.733466-5-kan.liang@linux.intel.com
Some units in a discovery table may be broken, e.g., UPI of SPR MCC.
A generic method is required to ignore the broken units.
Add uncore_units_ignore in the struct intel_uncore_init_fun, which
indicates the type ID of broken units. It will be assigned by the
platform-specific code later when the platform has a broken discovery
table.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Petlan <mpetlan@redhat.com>
Link: https://lore.kernel.org/r/20230112200105.733466-4-kan.liang@linux.intel.com
The current code assumes that the discovery table provides valid
box_ids for the normal units. It's not the case anymore since some units
in the discovery table are broken on some SPR variants.
Factor out uncore_get_box_id(). Check the existence of the type->box_ids
before using it. If it's not available, use pmu_idx.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Petlan <mpetlan@redhat.com>
Link: https://lore.kernel.org/r/20230112200105.733466-3-kan.liang@linux.intel.com
The same code is used to retrieve the logical die ID with a given PCI
device in both the discovery code and the code that supports a system
with > 8 nodes.
Factor out uncore_device_to_die() to replace the duplicate code.
No functional change.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Petlan <mpetlan@redhat.com>
Link: https://lore.kernel.org/r/20230112200105.733466-2-kan.liang@linux.intel.com
From the perspective of Intel cstate residency counters,
Emerald Rapids is the same as the Sapphire Rapids and Ice Lake.
Add Emerald Rapids model.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230106160449.3566477-2-kan.liang@linux.intel.com
From core PMU's perspective, Emerald Rapids is the same as the Sapphire
Rapids. The only difference is the event list, which will be
supported in the perf tool later.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230106160449.3566477-1-kan.liang@linux.intel.com
Factor out perf_prepare_header() so that it can call
perf_prepare_sample() without a header if not needed.
Also it checks the filtered_sample_type to avoid duplicate
work when perf_prepare_sample() is called twice (or more).
Suggested-by: Peter Zijlstr <peterz@infradead.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230118060559.615653-8-namhyung@kernel.org
When we saves the branch stack to the perf sample data, we needs to
update the sample flags and the dynamic size. To make sure this is
done consistently, add the perf_sample_save_brstack() helper and
convert all call sites.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230118060559.615653-5-namhyung@kernel.org
When we save the callchain to the perf sample data, we need to update
the sample flags and the dynamic size. To ensure this is done consistently,
add the perf_sample_save_callchain() helper and convert all call sites.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230118060559.615653-3-namhyung@kernel.org
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmPEGkMeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGE4YH/1sxdve3nlWT7eyf
VDanaCZFc2u6Sk1td23HyhvOVbFjj1E39UokHK9YfzD4hhn+u9SFvDgoXHGhHzYq
IhDvNM3mLsKpEtjwNbbi/lt6tryJchhZ96O5leRiUxZaw/GBVnHrKGR56vCjC/DB
zq8td4I+TmTPMpsL3e3WZqJoX3bjTqgZFNShA1mZFYtuQRpAVkJkafMRwuAySIMQ
+FyK/zZ+MpGJ7y/UmWfaBmS5GtjBz0fva7fTbEkUqk8bDtNUWMBhsTKtgU1LBpBe
Yrkhs3sdQdpKSm9yNaNrlLhSjFwkusV5kR09p6/5w+wthdPmjnoUZuEnAZpYyydE
ZY7+Vqk=
=q9Ac
-----END PGP SIGNATURE-----
Merge tag 'v6.2-rc4' into perf/core, to pick up fixes
Move from the -rc1 base to the fresher -rc4 kernel that
has various fixes included, before applying a larger
patchset.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Meteor Lake is Intel's successor to Raptor lake. From the perspective of
Intel cstate residency counters, there is nothing changed compared with
Raptor lake.
Share adl_cstates with Raptor lake.
Update the comments for Meteor Lake.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230104201349.1451191-6-kan.liang@linux.intel.com
The new CPUID leaf 0x23 reports the "true view" of PMU resources.
The sub-leaf 1 reports the available general-purpose counters and fixed
counters. Update the number of counters and fixed counters when the
sub-leaf is detected.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230104201349.1451191-5-kan.liang@linux.intel.com
Retire Latency reports the number of elapsed core clocks between the
retirement of the instruction indicated by the Instruction Pointer field
of the PEBS record and the retirement of the prior instruction. It's
enumerated by the IA32_PERF_CAPABILITIES.PEBS_TIMING_INFO[17].
Add flag PMU_FL_RETIRE_LATENCY to indicate the availability of the
feature.
The Retire Latency is not supported by the fixed counter 0 on p-core of
MTL.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230104201349.1451191-3-kan.liang@linux.intel.com
From PMU's perspective, Meteor Lake is similar to Alder Lake. Both are
hybrid platforms, with e-core and p-core.
The key differences include:
- The e-core supports 2 PDIST GP counters (GP0 & GP1)
- New MSRs for the Module Snoop Response Events on the e-core.
- New Data Source fields are introduced for the e-core.
- There are 8 GP counters for the e-core.
- The load latency AUX event is not required for the p-core anymore.
- Retire Latency (Support in a separate patch) for both cores.
Since most of the code in the intel_pmu_init() should be the same as
Alder Lake, to avoid code duplication, share the path with Alder Lake.
Add new specific functions of extra_regs, and get_event_constraints
to support the OCR events, Module Snoop Response Events and 2 PDIST
GP counters on e-core.
Add new MTL specific mem_attrs which drops the load latency AUX event.
The Data Source field is extended to 4:0, which can contains max 32
sources.
The Retire Latency is implemented with a separate patch.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230104201349.1451191-2-kan.liang@linux.intel.com
From the perspective of the uncore PMU, the new Emerald Rapids is the
same as the Sapphire Rapids. The only difference is the event list,
which will be supported in the perf tool later.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230106160449.3566477-4-kan.liang@linux.intel.com
Meteor Lake is Intel's successor to Raptor lake. From the perspective of
Intel cstate residency counters, there is nothing changed compared with
Raptor lake.
Share adl_cstates with Raptor lake.
Update the comments for Meteor Lake.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Link: https://lore.kernel.org/r/20230104201349.1451191-6-kan.liang@linux.intel.com
The x86_pmu.lbr_info is 0 unless explicitly initialized, so there's
no point checking x86_pmu.intel_cap.lbr_format.
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Signed-off-by: Yang Weijiang <weijiang.yang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Link: https://lkml.kernel.org/r/20221125040604.5051-2-weijiang.yang@intel.com
* Enable the per-vcpu dirty-ring tracking mechanism, together with an
option to keep the good old dirty log around for pages that are
dirtied by something other than a vcpu.
* Switch to the relaxed parallel fault handling, using RCU to delay
page table reclaim and giving better performance under load.
* Relax the MTE ABI, allowing a VMM to use the MAP_SHARED mapping option,
which multi-process VMMs such as crosvm rely on (see merge commit 382b5b87a9:
"Fix a number of issues with MTE, such as races on the tags being
initialised vs the PG_mte_tagged flag as well as the lack of support
for VM_SHARED when KVM is involved. Patches from Catalin Marinas and
Peter Collingbourne").
* Merge the pKVM shadow vcpu state tracking that allows the hypervisor
to have its own view of a vcpu, keeping that state private.
* Add support for the PMUv3p5 architecture revision, bringing support
for 64bit counters on systems that support it, and fix the
no-quite-compliant CHAIN-ed counter support for the machines that
actually exist out there.
* Fix a handful of minor issues around 52bit VA/PA support (64kB pages
only) as a prefix of the oncoming support for 4kB and 16kB pages.
* Pick a small set of documentation and spelling fixes, because no
good merge window would be complete without those.
s390:
* Second batch of the lazy destroy patches
* First batch of KVM changes for kernel virtual != physical address support
* Removal of a unused function
x86:
* Allow compiling out SMM support
* Cleanup and documentation of SMM state save area format
* Preserve interrupt shadow in SMM state save area
* Respond to generic signals during slow page faults
* Fixes and optimizations for the non-executable huge page errata fix.
* Reprogram all performance counters on PMU filter change
* Cleanups to Hyper-V emulation and tests
* Process Hyper-V TLB flushes from a nested guest (i.e. from a L2 guest
running on top of a L1 Hyper-V hypervisor)
* Advertise several new Intel features
* x86 Xen-for-KVM:
** Allow the Xen runstate information to cross a page boundary
** Allow XEN_RUNSTATE_UPDATE flag behaviour to be configured
** Add support for 32-bit guests in SCHEDOP_poll
* Notable x86 fixes and cleanups:
** One-off fixes for various emulation flows (SGX, VMXON, NRIPS=0).
** Reinstate IBPB on emulated VM-Exit that was incorrectly dropped a few
years back when eliminating unnecessary barriers when switching between
vmcs01 and vmcs02.
** Clean up vmread_error_trampoline() to make it more obvious that params
must be passed on the stack, even for x86-64.
** Let userspace set all supported bits in MSR_IA32_FEAT_CTL irrespective
of the current guest CPUID.
** Fudge around a race with TSC refinement that results in KVM incorrectly
thinking a guest needs TSC scaling when running on a CPU with a
constant TSC, but no hardware-enumerated TSC frequency.
** Advertise (on AMD) that the SMM_CTL MSR is not supported
** Remove unnecessary exports
Generic:
* Support for responding to signals during page faults; introduces
new FOLL_INTERRUPTIBLE flag that was reviewed by mm folks
Selftests:
* Fix an inverted check in the access tracking perf test, and restore
support for asserting that there aren't too many idle pages when
running on bare metal.
* Fix build errors that occur in certain setups (unsure exactly what is
unique about the problematic setup) due to glibc overriding
static_assert() to a variant that requires a custom message.
* Introduce actual atomics for clear/set_bit() in selftests
* Add support for pinning vCPUs in dirty_log_perf_test.
* Rename the so called "perf_util" framework to "memstress".
* Add a lightweight psuedo RNG for guest use, and use it to randomize
the access pattern and write vs. read percentage in the memstress tests.
* Add a common ucall implementation; code dedup and pre-work for running
SEV (and beyond) guests in selftests.
* Provide a common constructor and arch hook, which will eventually be
used by x86 to automatically select the right hypercall (AMD vs. Intel).
* A bunch of added/enabled/fixed selftests for ARM64, covering memslots,
breakpoints, stage-2 faults and access tracking.
* x86-specific selftest changes:
** Clean up x86's page table management.
** Clean up and enhance the "smaller maxphyaddr" test, and add a related
test to cover generic emulation failure.
** Clean up the nEPT support checks.
** Add X86_PROPERTY_* framework to retrieve multi-bit CPUID values.
** Fix an ordering issue in the AMX test introduced by recent conversions
to use kvm_cpu_has(), and harden the code to guard against similar bugs
in the future. Anything that tiggers caching of KVM's supported CPUID,
kvm_cpu_has() in this case, effectively hides opt-in XSAVE features if
the caching occurs before the test opts in via prctl().
Documentation:
* Remove deleted ioctls from documentation
* Clean up the docs for the x86 MSR filter.
* Various fixes
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmOaFrcUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPemQgAq49excg2Cc+EsHnZw3vu/QWdA0Rt
KhL3OgKxuHNjCbD2O9n2t5di7eJOTQ7F7T0eDm3xPTr4FS8LQ2327/mQePU/H2CF
mWOpq9RBWLzFsSTeVA2Mz9TUTkYSnDHYuRsBvHyw/n9cL76BWVzjImldFtjYjjex
yAwl8c5itKH6bc7KO+5ydswbvBzODkeYKUSBNdbn6m0JGQST7XppNwIAJvpiHsii
Qgpk0e4Xx9q4PXG/r5DedI6BlufBsLhv0aE9SHPzyKH3JbbUFhJYI8ZD5OhBQuYW
MwxK2KlM5Jm5ud2NZDDlsMmmvd1lnYCFDyqNozaKEWC1Y5rq1AbMa51fXA==
=QAYX
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM64:
- Enable the per-vcpu dirty-ring tracking mechanism, together with an
option to keep the good old dirty log around for pages that are
dirtied by something other than a vcpu.
- Switch to the relaxed parallel fault handling, using RCU to delay
page table reclaim and giving better performance under load.
- Relax the MTE ABI, allowing a VMM to use the MAP_SHARED mapping
option, which multi-process VMMs such as crosvm rely on (see merge
commit 382b5b87a9: "Fix a number of issues with MTE, such as
races on the tags being initialised vs the PG_mte_tagged flag as
well as the lack of support for VM_SHARED when KVM is involved.
Patches from Catalin Marinas and Peter Collingbourne").
- Merge the pKVM shadow vcpu state tracking that allows the
hypervisor to have its own view of a vcpu, keeping that state
private.
- Add support for the PMUv3p5 architecture revision, bringing support
for 64bit counters on systems that support it, and fix the
no-quite-compliant CHAIN-ed counter support for the machines that
actually exist out there.
- Fix a handful of minor issues around 52bit VA/PA support (64kB
pages only) as a prefix of the oncoming support for 4kB and 16kB
pages.
- Pick a small set of documentation and spelling fixes, because no
good merge window would be complete without those.
s390:
- Second batch of the lazy destroy patches
- First batch of KVM changes for kernel virtual != physical address
support
- Removal of a unused function
x86:
- Allow compiling out SMM support
- Cleanup and documentation of SMM state save area format
- Preserve interrupt shadow in SMM state save area
- Respond to generic signals during slow page faults
- Fixes and optimizations for the non-executable huge page errata
fix.
- Reprogram all performance counters on PMU filter change
- Cleanups to Hyper-V emulation and tests
- Process Hyper-V TLB flushes from a nested guest (i.e. from a L2
guest running on top of a L1 Hyper-V hypervisor)
- Advertise several new Intel features
- x86 Xen-for-KVM:
- Allow the Xen runstate information to cross a page boundary
- Allow XEN_RUNSTATE_UPDATE flag behaviour to be configured
- Add support for 32-bit guests in SCHEDOP_poll
- Notable x86 fixes and cleanups:
- One-off fixes for various emulation flows (SGX, VMXON, NRIPS=0).
- Reinstate IBPB on emulated VM-Exit that was incorrectly dropped
a few years back when eliminating unnecessary barriers when
switching between vmcs01 and vmcs02.
- Clean up vmread_error_trampoline() to make it more obvious that
params must be passed on the stack, even for x86-64.
- Let userspace set all supported bits in MSR_IA32_FEAT_CTL
irrespective of the current guest CPUID.
- Fudge around a race with TSC refinement that results in KVM
incorrectly thinking a guest needs TSC scaling when running on a
CPU with a constant TSC, but no hardware-enumerated TSC
frequency.
- Advertise (on AMD) that the SMM_CTL MSR is not supported
- Remove unnecessary exports
Generic:
- Support for responding to signals during page faults; introduces
new FOLL_INTERRUPTIBLE flag that was reviewed by mm folks
Selftests:
- Fix an inverted check in the access tracking perf test, and restore
support for asserting that there aren't too many idle pages when
running on bare metal.
- Fix build errors that occur in certain setups (unsure exactly what
is unique about the problematic setup) due to glibc overriding
static_assert() to a variant that requires a custom message.
- Introduce actual atomics for clear/set_bit() in selftests
- Add support for pinning vCPUs in dirty_log_perf_test.
- Rename the so called "perf_util" framework to "memstress".
- Add a lightweight psuedo RNG for guest use, and use it to randomize
the access pattern and write vs. read percentage in the memstress
tests.
- Add a common ucall implementation; code dedup and pre-work for
running SEV (and beyond) guests in selftests.
- Provide a common constructor and arch hook, which will eventually
be used by x86 to automatically select the right hypercall (AMD vs.
Intel).
- A bunch of added/enabled/fixed selftests for ARM64, covering
memslots, breakpoints, stage-2 faults and access tracking.
- x86-specific selftest changes:
- Clean up x86's page table management.
- Clean up and enhance the "smaller maxphyaddr" test, and add a
related test to cover generic emulation failure.
- Clean up the nEPT support checks.
- Add X86_PROPERTY_* framework to retrieve multi-bit CPUID values.
- Fix an ordering issue in the AMX test introduced by recent
conversions to use kvm_cpu_has(), and harden the code to guard
against similar bugs in the future. Anything that tiggers
caching of KVM's supported CPUID, kvm_cpu_has() in this case,
effectively hides opt-in XSAVE features if the caching occurs
before the test opts in via prctl().
Documentation:
- Remove deleted ioctls from documentation
- Clean up the docs for the x86 MSR filter.
- Various fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (361 commits)
KVM: x86: Add proper ReST tables for userspace MSR exits/flags
KVM: selftests: Allocate ucall pool from MEM_REGION_DATA
KVM: arm64: selftests: Align VA space allocator with TTBR0
KVM: arm64: Fix benign bug with incorrect use of VA_BITS
KVM: arm64: PMU: Fix period computation for 64bit counters with 32bit overflow
KVM: x86: Advertise that the SMM_CTL MSR is not supported
KVM: x86: remove unnecessary exports
KVM: selftests: Fix spelling mistake "probabalistic" -> "probabilistic"
tools: KVM: selftests: Convert clear/set_bit() to actual atomics
tools: Drop "atomic_" prefix from atomic test_and_set_bit()
tools: Drop conflicting non-atomic test_and_{clear,set}_bit() helpers
KVM: selftests: Use non-atomic clear/set bit helpers in KVM tests
perf tools: Use dedicated non-atomic clear/set bit helpers
tools: Take @bit as an "unsigned long" in {clear,set}_bit() helpers
KVM: arm64: selftests: Enable single-step without a "full" ucall()
KVM: x86: fix APICv/x2AVIC disabled when vm reboot by itself
KVM: Remove stale comment about KVM_REQ_UNHALT
KVM: Add missing arch for KVM_CREATE_DEVICE and KVM_{SET,GET}_DEVICE_ATTR
KVM: Reference to kvm_userspace_memory_region in doc and comments
KVM: Delete all references to removed KVM_SET_MEMORY_ALIAS ioctl
...
- Thoroughly rewrite the data structures that implement perf task context handling,
with the goal of fixing various quirks and unfeatures both in already merged,
and in upcoming proposed code.
The old data structure is the per task and per cpu perf_event_contexts:
task_struct::perf_events_ctxp[] <-> perf_event_context <-> perf_cpu_context
^ | ^ | ^
`---------------------------------' | `--> pmu ---'
v ^
perf_event ------'
In this new design this is replaced with a single task context and
a single CPU context, plus intermediate data-structures:
task_struct::perf_event_ctxp -> perf_event_context <- perf_cpu_context
^ | ^ ^
`---------------------------' | |
| | perf_cpu_pmu_context <--.
| `----. ^ |
| | | |
| v v |
| ,--> perf_event_pmu_context |
| | |
| | |
v v |
perf_event ---> pmu ----------------'
[ See commit bd27568117 for more details. ]
This rewrite was developed by Peter Zijlstra and Ravi Bangoria.
- Optimize perf_tp_event()
- Update the Intel uncore PMU driver, extending it with UPI topology discovery
on various hardware models.
- Misc fixes & cleanups
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=KNaI
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2022-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf events updates from Ingo Molnar:
- Thoroughly rewrite the data structures that implement perf task
context handling, with the goal of fixing various quirks and
unfeatures both in already merged, and in upcoming proposed code.
The old data structure is the per task and per cpu
perf_event_contexts:
task_struct::perf_events_ctxp[] <-> perf_event_context <-> perf_cpu_context
^ | ^ | ^
`---------------------------------' | `--> pmu ---'
v ^
perf_event ------'
In this new design this is replaced with a single task context and a
single CPU context, plus intermediate data-structures:
task_struct::perf_event_ctxp -> perf_event_context <- perf_cpu_context
^ | ^ ^
`---------------------------' | |
| | perf_cpu_pmu_context <--.
| `----. ^ |
| | | |
| v v |
| ,--> perf_event_pmu_context |
| | |
| | |
v v |
perf_event ---> pmu ----------------'
[ See commit bd27568117 for more details. ]
This rewrite was developed by Peter Zijlstra and Ravi Bangoria.
- Optimize perf_tp_event()
- Update the Intel uncore PMU driver, extending it with UPI topology
discovery on various hardware models.
- Misc fixes & cleanups
* tag 'perf-core-2022-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
perf/x86/intel/uncore: Fix reference count leak in __uncore_imc_init_box()
perf/x86/intel/uncore: Fix reference count leak in snr_uncore_mmio_map()
perf/x86/intel/uncore: Fix reference count leak in hswep_has_limit_sbox()
perf/x86/intel/uncore: Fix reference count leak in sad_cfg_iio_topology()
perf/x86/intel/uncore: Make set_mapping() procedure void
perf/x86/intel/uncore: Update sysfs-devices-mapping file
perf/x86/intel/uncore: Enable UPI topology discovery for Sapphire Rapids
perf/x86/intel/uncore: Enable UPI topology discovery for Icelake Server
perf/x86/intel/uncore: Get UPI NodeID and GroupID
perf/x86/intel/uncore: Enable UPI topology discovery for Skylake Server
perf/x86/intel/uncore: Generalize get_topology() for SKX PMUs
perf/x86/intel/uncore: Disable I/O stacks to PMU mapping on ICX-D
perf/x86/intel/uncore: Clear attr_update properly
perf/x86/intel/uncore: Introduce UPI topology type
perf/x86/intel/uncore: Generalize IIO topology support
perf/core: Don't allow grouping events from different hw pmus
perf/amd/ibs: Make IBS a core pmu
perf: Fix function pointer case
perf/x86/amd: Remove the repeated declaration
perf: Fix possible memleak in pmu_dev_alloc()
...
-----BEGIN PGP SIGNATURE-----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=CxjR
-----END PGP SIGNATURE-----
Merge tag 'unsigned-char-6.2-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/zx2c4/linux
Pull unsigned-char conversion from Jason Donenfeld:
"Enable -funsigned-char and fix code affected by that flag.
During the 6.1 cycle, several patches already made it into the tree,
which were for code that was already broken on at least one
architecture, where the naked char had a different sign than the code
author anticipated, or were part of some bug fix for an existing bug
that this initiative unearthed.
These 6.1-era fixes are:
648060902a ("MIPS: pic32: treat port as signed integer")
5c26159c97 ("ipvs: use explicitly signed chars")
e6cb876945 ("wifi: airo: do not assign -1 to unsigned char")
937ec9f7d5 ("staging: rtl8192e: remove bogus ssid character sign test")
6770473832 ("misc: sgi-gru: use explicitly signed char")
50895a55bc ("ALSA: rme9652: use explicitly signed char")
ee03c0f200 ("ALSA: au88x0: use explicitly signed char")
835bed1b83 ("fbdev: sisfb: use explicitly signed char")
50f19697dd ("parisc: Use signed char for hardware path in pdc.h")
66063033f7 ("wifi: rt2x00: use explicitly signed or unsigned types")
Regarding patches in this pull:
- There is one patch in this pull that should have made it to you
during 6.1 ("media: stv0288: use explicitly signed char"), but the
maintainer was MIA during the cycle, so it's in here instead.
- Two patches fix single architecture code affected by unsigned char
("perf/x86: Make struct p4_event_bind::cntr signed array" and
"sparc: sbus: treat CPU index as integer"), while one patch fixes
an unused typedef, in case it's ever used in the future ("media:
atomisp: make hive_int8 explictly signed").
- Finally, there's the change to actually enable -funsigned-char
("kbuild: treat char as always unsigned") and then the removal of
some no longer useful !__CHAR_UNSIGNED__ selftest code ("lib:
assume char is unsigned").
The various fixes were found with a combination of diffing objdump
output, a large variety of Coccinelle scripts, and plain old grep. In
the end, things didn't seem as bad as I feared they would. But of
course, it's also possible I missed things.
However, this has been in linux-next for basically an entire cycle
now, so I'm not overly worried. I've also been daily driving this on
my laptop for all of 6.1. Still, this series, and the ones sent for
6.1 don't total in quantity to what I thought it'd be, so I will be on
the lookout for breakage.
We could receive a few reports that are quickly fixable. Hopefully we
won't receive a barrage of reports that would result in a revert. And
just maybe we won't receive any reports at all and nobody will even
notice. Knock on wood"
* tag 'unsigned-char-6.2-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/zx2c4/linux:
lib: assume char is unsigned
kbuild: treat char as always unsigned
media: atomisp: make hive_int8 explictly signed
media: stv0288: use explicitly signed char
sparc: sbus: treat CPU index as integer
perf/x86: Make struct p4_event_bind::cntr signed array
pci_get_device() will increase the reference count for the returned
pci_dev, so tgl_uncore_get_mc_dev() will return a pci_dev with its
reference count increased. We need to call pci_dev_put() to decrease the
reference count before exiting from __uncore_imc_init_box(). Add
pci_dev_put() for both normal and error path.
Fixes: fdb6482244 ("perf/x86: Add Intel Tiger Lake uncore support")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20221118063137.121512-5-wangxiongfeng2@huawei.com
pci_get_device() will increase the reference count for the returned
pci_dev, so snr_uncore_get_mc_dev() will return a pci_dev with its
reference count increased. We need to call pci_dev_put() to decrease the
reference count. Let's add the missing pci_dev_put().
Fixes: ee49532b38 ("perf/x86/intel/uncore: Add IMC uncore support for Snow Ridge")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20221118063137.121512-4-wangxiongfeng2@huawei.com
pci_get_device() will increase the reference count for the returned
'dev'. We need to call pci_dev_put() to decrease the reference count.
Since 'dev' is only used in pci_read_config_dword(), let's add
pci_dev_put() right after it.
Fixes: 9d480158ee ("perf/x86/intel/uncore: Remove uncore extra PCI dev HSWEP_PCI_PCU_3")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20221118063137.121512-3-wangxiongfeng2@huawei.com
pci_get_device() will increase the reference count for the returned
pci_dev, and also decrease the reference count for the input parameter
*from* if it is not NULL.
If we break the loop in sad_cfg_iio_topology() with 'dev' not NULL. We
need to call pci_dev_put() to decrease the reference count. Since
pci_dev_put() can handle the NULL input parameter, we can just add one
pci_dev_put() right before 'return ret'.
Fixes: c1777be364 ("perf/x86/intel/uncore: Enable I/O stacks to IIO PMON mapping on SNR")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20221118063137.121512-2-wangxiongfeng2@huawei.com
Return value of set_mapping() is not needed to be checked anymore.
So, make this procedure void.
Signed-off-by: Alexander Antonov <alexander.antonov@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20221117122833.3103580-12-alexander.antonov@linux.intel.com
UPI topology discovery on SPR is same as in ICX but UBOX device has
different Device ID 0x3250.
This patch enables /sys/devices/uncore_upi_*/die* attributes on SPR.
Signed-off-by: Alexander Antonov <alexander.antonov@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20221117122833.3103580-10-alexander.antonov@linux.intel.com
UPI topology discovery relies on data from KTILP0 (offset 0x94) and
KTIPCSTS (offset 0x120) as well as on SKX but on Icelake Server these
registers reside under UBOX (Device ID 0x3450) bus.
This patch enables /sys/devices/uncore_upi_*/die* attributes on Icelake
Server.
Signed-off-by: Alexander Antonov <alexander.antonov@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20221117122833.3103580-9-alexander.antonov@linux.intel.com
The GIDNIDMAP register of UBOX device is used to get the topology
information in the snbep_pci2phy_map_init(). The same approach will be
used to discover UPI topology for ICX and SPR platforms.
Move common code that will be reused in next patches.
Signed-off-by: Alexander Antonov <alexander.antonov@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20221117122833.3103580-8-alexander.antonov@linux.intel.com
UPI topology discovery relies on data from KTILP0 (offset 0x94) and
KTIPCSTS (offset 0x120) registers which reside under IIO bus(3) on
SKX/CLX.
This patch enable UPI topology discovery on Skylake Server. Topology is
exposed through attributes /sys/devices/uncore_upi_<pmu_idx>/dieX,
where dieX is file which holds "upi_<idx1>:die_<idx2>" connected to
this UPI link.
Signed-off-by: Alexander Antonov <alexander.antonov@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20221117122833.3103580-7-alexander.antonov@linux.intel.com
Factor out a generic code from skx_iio_get_topology() to skx_pmu_get_topology()
to avoid code duplication. This code will be used by get_topology() procedure
for SKX UPI PMUs in the further patch.
Signed-off-by: Alexander Antonov <alexander.antonov@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20221117122833.3103580-6-alexander.antonov@linux.intel.com
Current implementation of I/O stacks to PMU mapping doesn't support ICX-D.
Detect ICX-D system to disable mapping.
Fixes: 10337e95e0 ("perf/x86/intel/uncore: Enable I/O stacks to IIO PMON mapping on ICX")
Signed-off-by: Alexander Antonov <alexander.antonov@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221117122833.3103580-5-alexander.antonov@linux.intel.com
Current clear_attr_update procedure in pmu_set_mapping() sets attr_update
field in NULL that is not correct because intel_uncore_type pmu types can
contain several groups in attr_update field. For example, SPR platform
already has uncore_alias_group to update and then UPI topology group will
be added in next patches.
Fix current behavior and clear attr_update group related to mapping only.
Fixes: bb42b3d397 ("perf/x86/intel/uncore: Expose an Uncore unit to IIO PMON mapping")
Signed-off-by: Alexander Antonov <alexander.antonov@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221117122833.3103580-4-alexander.antonov@linux.intel.com
This patch introduces new 'uncore_upi_topology' topology type to support
UPI topology discovery.
Signed-off-by: Alexander Antonov <alexander.antonov@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20221117122833.3103580-3-alexander.antonov@linux.intel.com
Current implementation of uncore mapping doesn't support different types
of uncore PMUs which have its own topology context. This patch generalizes
Intel uncore topology implementation to be able easily introduce support
for new uncore blocks.
Signed-off-by: Alexander Antonov <alexander.antonov@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20221117122833.3103580-2-alexander.antonov@linux.intel.com
struct p4_event_bind::cntr[][] should be signed because of
the following code:
int i, j;
for (i = 0; i < P4_CNTR_LIMIT; i++) {
---> j = bind->cntr[thread][i];
if (j != -1 && !test_bit(j, used_mask))
return j;
}
Making this member unsigned will make "j" 255 and fail "j != -1"
comparison.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
