riscv patches for 6.16-rc1, part 2
* Performance improvements
- Add support for vdso getrandom
- Implement raid6 calculations using vectors
- Introduce svinval tlb invalidation
* Cleanup
- A bunch of deduplication of the macros we use for manipulating instructions
* Misc
- Introduce a kunit test for kprobes
- Add support for mseal as riscv fits the requirements (thanks to Lorenzo for making sure of that :))
[Palmer: There was a rebase between part 1 and part 2, so I've had to do
some more git surgery here... at least two rounds of surgery...]
* alex-pr-2: (866 commits)
RISC-V: vDSO: Wire up getrandom() vDSO implementation
riscv: enable mseal sysmap for RV64
raid6: Add RISC-V SIMD syndrome and recovery calculations
riscv: mm: Add support for Svinval extension
riscv: Add kprobes KUnit test
riscv: kprobes: Remove duplication of RV_EXTRACT_ITYPE_IMM
riscv: kprobes: Remove duplication of RV_EXTRACT_UTYPE_IMM
riscv: kprobes: Remove duplication of RV_EXTRACT_RD_REG
riscv: kprobes: Remove duplication of RVC_EXTRACT_BTYPE_IMM
riscv: kprobes: Remove duplication of RVC_EXTRACT_C2_RS1_REG
riscv: kproves: Remove duplication of RVC_EXTRACT_JTYPE_IMM
riscv: kprobes: Remove duplication of RV_EXTRACT_BTYPE_IMM
riscv: kprobes: Remove duplication of RV_EXTRACT_RS1_REG
riscv: kprobes: Remove duplication of RV_EXTRACT_JTYPE_IMM
riscv: kprobes: Move branch_funct3 to insn.h
riscv: kprobes: Move branch_rs2_idx to insn.h
Linux 6.15-rc6
Input: xpad - fix xpad_device sorting
Input: xpad - add support for several more controllers
Input: xpad - fix Share button on Xbox One controllers
...
Hook up the generic vDSO implementation to the generic vDSO getrandom
implementation by providing the required __arch_chacha20_blocks_nostack
and getrandom_syscall implementations. Also wire up the selftests.
The benchmark result:
vdso: 25000000 times in 2.466341333 seconds
libc: 25000000 times in 41.447720005 seconds
syscall: 25000000 times in 41.043926672 seconds
vdso: 25000000 x 256 times in 162.286219353 seconds
libc: 25000000 x 256 times in 2953.855018685 seconds
syscall: 25000000 x 256 times in 2796.268546000 seconds
[ alex: - Fix dynamic relocation
- Squash Nathan's fix https://lore.kernel.org/all/20250423-riscv-fix-compat_vdso-lld-v2-1-b7bbbc244501@kernel.org/
- Add comment from Loongarch ]
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Link: https://lore.kernel.org/r/20250411024600.16045-1-xry111@xry111.site
Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
When RISC-V borned, DT_GNU_HASH had already became the de-facto
standard so DT_HASH is just wasting storage space. Remove the explicit
--hash-style=both setting and rely on the distro toolchain default,
which is most likely "gnu" (i.e. generating only DT_GNU_HASH, no
DT_HASH).
Following the logic of commit 48f6430505
("arm64/vdso: Remove --hash-style=sysv").
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Link: https://lore.kernel.org/r/20250224112042.60282-2-xry111@xry111.site
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Hook up the generic vDSO implementation to the generic vDSO getrandom
implementation by providing the required __arch_chacha20_blocks_nostack
and getrandom_syscall implementations. Also wire up the selftests.
The benchmark result:
vdso: 25000000 times in 2.466341333 seconds
libc: 25000000 times in 41.447720005 seconds
syscall: 25000000 times in 41.043926672 seconds
vdso: 25000000 x 256 times in 162.286219353 seconds
libc: 25000000 x 256 times in 2953.855018685 seconds
syscall: 25000000 x 256 times in 2796.268546000 seconds
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Link: https://lore.kernel.org/r/20250411024600.16045-1-xry111@xry111.site
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
As the Makefile is included into other Makefiles it can not be used to
define objects to be built from the current source directory.
However the generic datastore will introduce such a local source file.
Rename the included Makefile so it is clear how it is to be used and to
make room for a regular Makefile in lib/vdso/.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250204-vdso-store-rng-v3-4-13a4669dfc8c@linutronix.de
Like other architectures, use the common cmd_vdso_check to make sure of
that.
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Tested-by: Vladimir Isaev <vladimir.isaev@syntacore.com>
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20241016083625.136311-3-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The compiler is smart enough to insert a call to memset() in
riscv_vdso_get_cpus(), which generates a dynamic relocation.
So prevent this by using -fno-builtin option.
Fixes: e2c0cdfba7 ("RISC-V: User-facing API")
Cc: stable@vger.kernel.org
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20241016083625.136311-2-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The vdso.so.dbg is a debug version of vdso and could be used for debugging
purpose. For example, perf-annotate requires debugging info to show source
lines. So let's keep its debugging info.
Signed-off-by: Changbin Du <changbin.du@huawei.com>
Reviewed-by: Cyril Bur <cyrilbur@tenstorrent.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240611040947.3024710-1-changbin.du@huawei.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Now Kbuild provides reasonable defaults for objtool, sanitizers, and
profilers.
Remove redundant variables.
Note:
This commit changes the coverage for some objects:
- include arch/mips/vdso/vdso-image.o into UBSAN, GCOV, KCOV
- include arch/sparc/vdso/vdso-image-*.o into UBSAN
- include arch/sparc/vdso/vma.o into UBSAN
- include arch/x86/entry/vdso/extable.o into KASAN, KCSAN, UBSAN, GCOV, KCOV
- include arch/x86/entry/vdso/vdso-image-*.o into KASAN, KCSAN, UBSAN, GCOV, KCOV
- include arch/x86/entry/vdso/vdso32-setup.o into KASAN, KCSAN, UBSAN, GCOV, KCOV
- include arch/x86/entry/vdso/vma.o into GCOV, KCOV
- include arch/x86/um/vdso/vma.o into KASAN, GCOV, KCOV
I believe these are positive effects because all of them are kernel
space objects.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Roberto Sassu <roberto.sassu@huawei.com>
Kbuild conventionally uses $(obj)/ for generated files, and $(src)/ for
checked-in source files. It is merely a convention without any functional
difference. In fact, $(obj) and $(src) are exactly the same, as defined
in scripts/Makefile.build:
src := $(obj)
When the kernel is built in a separate output directory, $(src) does
not accurately reflect the source directory location. While Kbuild
resolves this discrepancy by specifying VPATH=$(srctree) to search for
source files, it does not cover all cases. For example, when adding a
header search path for local headers, -I$(srctree)/$(src) is typically
passed to the compiler.
This introduces inconsistency between upstream and downstream Makefiles
because $(src) is used instead of $(srctree)/$(src) for the latter.
To address this inconsistency, this commit changes the semantics of
$(src) so that it always points to the directory in the source tree.
Going forward, the variables used in Makefiles will have the following
meanings:
$(obj) - directory in the object tree
$(src) - directory in the source tree (changed by this commit)
$(objtree) - the top of the kernel object tree
$(srctree) - the top of the kernel source tree
Consequently, $(srctree)/$(src) in upstream Makefiles need to be replaced
with $(src).
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Such relocation causes crash of android linker similar to one
described in commit e05d57dcb8
("riscv: Fixup __vdso_gettimeofday broke dynamic ftrace").
Looks like this relocation is added by CONFIG_DYNAMIC_FTRACE which is
disabled in the default android kernel.
Before:
readelf -rW arch/riscv/kernel/vdso/vdso.so:
Relocation section '.rela.dyn' at offset 0xd00 contains 1 entry:
Offset Info Type
0000000000000d20 0000000000000003 R_RISCV_RELATIVE
objdump:
0000000000000c86 <__vdso_riscv_hwprobe@@LINUX_4.15>:
c86: 0001 nop
c88: 0001 nop
c8a: 0001 nop
c8c: 0001 nop
c8e: e211 bnez a2,c92 <__vdso_riscv_hwprobe...
After:
readelf -rW arch/riscv/kernel/vdso/vdso.so:
There are no relocations in this file.
objdump:
0000000000000c86 <__vdso_riscv_hwprobe@@LINUX_4.15>:
c86: e211 bnez a2,c8a <__vdso_riscv_hwprobe...
c88: c6b9 beqz a3,cd6 <__vdso_riscv_hwprobe...
c8a: e739 bnez a4,cd8 <__vdso_riscv_hwprobe...
c8c: ffffd797 auipc a5,0xffffd
Also disable SCS since it also should not be available in vdso.
Fixes: aa5af0aa90 ("RISC-V: Add hwprobe vDSO function and data")
Signed-off-by: Roman Artemev <roman.artemev@syntacore.com>
Signed-off-by: Vladimir Isaev <vladimir.isaev@syntacore.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20240313085843.17661-1-vladimir.isaev@syntacore.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
* Support for cbo.zero in userspace.
* Support for CBOs on ACPI-based systems.
* A handful of improvements for the T-Head cache flushing ops.
* Support for software shadow call stacks.
* Various cleanups and fixes.
-----BEGIN PGP SIGNATURE-----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=hKWl
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for cbo.zero in userspace
- Support for CBOs on ACPI-based systems
- A handful of improvements for the T-Head cache flushing ops
- Support for software shadow call stacks
- Various cleanups and fixes
* tag 'riscv-for-linus-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (31 commits)
RISC-V: hwprobe: Fix vDSO SIGSEGV
riscv: configs: defconfig: Enable configs required for RZ/Five SoC
riscv: errata: prefix T-Head mnemonics with th.
riscv: put interrupt entries into .irqentry.text
riscv: mm: Update the comment of CONFIG_PAGE_OFFSET
riscv: Using TOOLCHAIN_HAS_ZIHINTPAUSE marco replace zihintpause
riscv/mm: Fix the comment for swap pte format
RISC-V: clarify the QEMU workaround in ISA parser
riscv: correct pt_level name via pgtable_l5/4_enabled
RISC-V: Provide pgtable_l5_enabled on rv32
clocksource: timer-riscv: Increase rating of clock_event_device for Sstc
clocksource: timer-riscv: Don't enable/disable timer interrupt
lkdtm: Fix CFI_BACKWARD on RISC-V
riscv: Use separate IRQ shadow call stacks
riscv: Implement Shadow Call Stack
riscv: Move global pointer loading to a macro
riscv: Deduplicate IRQ stack switching
riscv: VMAP_STACK overflow detection thread-safe
RISC-V: cacheflush: Initialize CBO variables on ACPI systems
RISC-V: ACPI: RHCT: Add function to get CBO block sizes
...
Currently, there is no standard implementation for vdso_install,
leading to various issues:
1. Code duplication
Many architectures duplicate similar code just for copying files
to the install destination.
Some architectures (arm, sparc, x86) create build-id symlinks,
introducing more code duplication.
2. Unintended updates of in-tree build artifacts
The vdso_install rule depends on the vdso files to install.
It may update in-tree build artifacts. This can be problematic,
as explained in commit 19514fc665 ("arm, kbuild: make
"make install" not depend on vmlinux").
3. Broken code in some architectures
Makefile code is often copied from one architecture to another
without proper adaptation.
'make vdso_install' for parisc does not work.
'make vdso_install' for s390 installs vdso64, but not vdso32.
To address these problems, this commit introduces a generic vdso_install
rule.
Architectures that support vdso_install need to define vdso-install-y
in arch/*/Makefile. vdso-install-y lists the files to install.
For example, arch/x86/Makefile looks like this:
vdso-install-$(CONFIG_X86_64) += arch/x86/entry/vdso/vdso64.so.dbg
vdso-install-$(CONFIG_X86_X32_ABI) += arch/x86/entry/vdso/vdsox32.so.dbg
vdso-install-$(CONFIG_X86_32) += arch/x86/entry/vdso/vdso32.so.dbg
vdso-install-$(CONFIG_IA32_EMULATION) += arch/x86/entry/vdso/vdso32.so.dbg
These files will be installed to $(MODLIB)/vdso/ with the .dbg suffix,
if exists, stripped away.
vdso-install-y can optionally take the second field after the colon
separator. This is needed because some architectures install a vdso
file as a different base name.
The following is a snippet from arch/arm64/Makefile.
vdso-install-$(CONFIG_COMPAT_VDSO) += arch/arm64/kernel/vdso32/vdso.so.dbg:vdso32.so
This will rename vdso.so.dbg to vdso32.so during installation. If such
architectures change their implementation so that the base names match,
this workaround will go away.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Sven Schnelle <svens@linux.ibm.com> # s390
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Reviewed-by: Guo Ren <guoren@kernel.org>
Acked-by: Helge Deller <deller@gmx.de> # parisc
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Implement CONFIG_SHADOW_CALL_STACK for RISC-V. When enabled, the
compiler injects instructions to all non-leaf C functions to
store the return address to the shadow stack and unconditionally
load it again before returning, which makes it harder to corrupt
the return address through a stack overflow, for example.
The active shadow call stack pointer is stored in the gp
register, which makes SCS incompatible with gp relaxation. Use
--no-relax-gp to ensure gp relaxation is disabled and disable
global pointer loading. Add SCS pointers to struct thread_info,
implement SCS initialization, and task switching
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20230927224757.1154247-12-samitolvanen@google.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
* Support for runtime detection of the Svnapot extension.
* Support for Zicboz when clearing pages.
* We've moved to GENERIC_ENTRY.
* Support for !MMU on rv32 systems.
* The linear region is now mapped via huge pages.
* Support for building relocatable kernels.
* Support for the hwprobe interface.
* Various fixes and cleanups throughout the tree.
-----BEGIN PGP SIGNATURE-----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=oxQd
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.4-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for runtime detection of the Svnapot extension
- Support for Zicboz when clearing pages
- We've moved to GENERIC_ENTRY
- Support for !MMU on rv32 systems
- The linear region is now mapped via huge pages
- Support for building relocatable kernels
- Support for the hwprobe interface
- Various fixes and cleanups throughout the tree
* tag 'riscv-for-linus-6.4-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (57 commits)
RISC-V: hwprobe: Explicity check for -1 in vdso init
RISC-V: hwprobe: There can only be one first
riscv: Allow to downgrade paging mode from the command line
dt-bindings: riscv: add sv57 mmu-type
RISC-V: hwprobe: Remove __init on probe_vendor_features()
riscv: Use --emit-relocs in order to move .rela.dyn in init
riscv: Check relocations at compile time
powerpc: Move script to check relocations at compile time in scripts/
riscv: Introduce CONFIG_RELOCATABLE
riscv: Move .rela.dyn outside of init to avoid empty relocations
riscv: Prepare EFI header for relocatable kernels
riscv: Unconditionnally select KASAN_VMALLOC if KASAN
riscv: Fix ptdump when KASAN is enabled
riscv: Fix EFI stub usage of KASAN instrumented strcmp function
riscv: Move DTB_EARLY_BASE_VA to the kernel address space
riscv: Rework kasan population functions
riscv: Split early and final KASAN population functions
riscv: Use PUD/P4D/PGD pages for the linear mapping
riscv: Move the linear mapping creation in its own function
riscv: Get rid of riscv_pfn_base variable
...
Add a vDSO function __vdso_riscv_hwprobe, which can sit in front of the
riscv_hwprobe syscall and answer common queries. We stash a copy of
static answers for the "all CPUs" case in the vDSO data page. This data
is private to the vDSO, so we can decide later to change what's stored
there or under what conditions we defer to the syscall. Currently all
data can be discovered at boot, so the vDSO function answers all queries
when the cpumask is set to the "all CPUs" hint.
There's also a boolean in the data that lets the vDSO function know that
all CPUs are the same. In that case, the vDSO will also answer queries
for arbitrary CPU masks in addition to the "all CPUs" hint.
Signed-off-by: Evan Green <evan@rivosinc.com>
Link: https://lore.kernel.org/r/20230407231103.2622178-7-evan@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The actual intention is that no dynamic relocation exists in the VDSO. For
this the VDSO build validates that the resulting .so file does not have any
relocations which are specified via $(ARCH_REL_TYPE_ABS) per architecture,
which is fragile as e.g. ARM64 lacks an entry for R_AARCH64_RELATIVE. Aside
of that ARCH_REL_TYPE_ABS is a misnomer as it checks for relative
relocations too.
However, some GNU ld ports produce unneeded R_*_NONE relocation entries. If
a port fails to determine the exact .rel[a].dyn size, the trailing zeros
become R_*_NONE relocations. E.g. ld's powerpc port recently fixed
https://sourceware.org/bugzilla/show_bug.cgi?id=29540). R_*_NONE are
generally a no-op in the dynamic loaders. So just ignore them.
Remove the ARCH_REL_TYPE_ABS defines and just validate that the resulting
.so file does not contain any R_* relocation entries except R_*_NONE.
Signed-off-by: Fangrui Song <maskray@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> # for aarch64
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> # for vDSO, aarch64
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Link: https://lore.kernel.org/r/20230310190750.3323802-1-maskray@google.com
lkp reported a build error, I tried the config and can reproduce
build error as below:
VDSOLD arch/riscv/kernel/vdso/vdso.so.dbg
ld.lld: error: section .note file range overlaps with .text
>>> .note range is [0x7C8, 0x803]
>>> .text range is [0x800, 0x1993]
ld.lld: error: section .text file range overlaps with .dynamic
>>> .text range is [0x800, 0x1993]
>>> .dynamic range is [0x808, 0x937]
ld.lld: error: section .note virtual address range overlaps with .text
>>> .note range is [0x7C8, 0x803]
>>> .text range is [0x800, 0x1993]
Fix it by setting DISABLE_BRANCH_PROFILING which will disable branch
tracing for vdso, thus avoid useless _ftrace_annotated_branch section
and _ftrace_branch section. Although we can also fix it by removing
the hardcoded .text begin address, but I think that's another story
and should be put into another patch.
Link: https://lore.kernel.org/lkml/202210122123.Cc4FPShJ-lkp@intel.com/#r
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://lore.kernel.org/r/20221102170254.1925-1-jszhang@kernel.org
Fixes: ad5d1122b8 ("riscv: use vDSO common flow to reduce the latency of the time-related functions")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Recently, ld.lld moved from '--undefined-version' to
'--no-undefined-version' as the default, which breaks the compat vDSO
build:
ld.lld: error: version script assignment of 'LINUX_4.15' to symbol '__vdso_gettimeofday' failed: symbol not defined
ld.lld: error: version script assignment of 'LINUX_4.15' to symbol '__vdso_clock_gettime' failed: symbol not defined
ld.lld: error: version script assignment of 'LINUX_4.15' to symbol '__vdso_clock_getres' failed: symbol not defined
These symbols are not present in the compat vDSO or the regular vDSO for
32-bit but they are unconditionally included in the version section of
the linker script, which is prohibited with '--no-undefined-version'.
Fix this issue by only including the symbols that are actually exported
in the version section of the linker script.
Link: https://github.com/ClangBuiltLinux/linux/issues/1756
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20221108171324.3377226-1-nathan@kernel.org/
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Even after commit 89fd4a1df8 ("riscv: jump_label: mark arguments as
const to satisfy asm constraints"), building with CC_OPTIMIZE_FOR_SIZE
+ LLVM=1 can reproduce below build error:
CC arch/riscv/kernel/vdso/vgettimeofday.o
In file included from <built-in>:4:
In file included from lib/vdso/gettimeofday.c:5:
In file included from include/vdso/datapage.h:17:
In file included from include/vdso/processor.h:10:
In file included from arch/riscv/include/asm/vdso/processor.h:7:
In file included from include/linux/jump_label.h:112:
arch/riscv/include/asm/jump_label.h:42:3: error:
invalid operand for inline asm constraint 'i'
" .option push \n\t"
^
1 error generated.
I think the problem is when "-Os" is passed as CFLAGS, it's removed by
"CFLAGS_REMOVE_vgettimeofday.o = $(CC_FLAGS_FTRACE) -Os" which is
introduced in commit e05d57dcb8 ("riscv: Fixup __vdso_gettimeofday
broke dynamic ftrace"), thus no optimization at all for vgettimeofday.c
arm64 does remove "-Os" as well, but it forces "-O2" after removing
"-Os".
I compared the generated vgettimeofday.o with "-O2" and "-Os",
I think no big performance difference. So let's tell the kbuild not
to remove "-Os" rather than follow arm64 style.
vdso related performance can be improved a lot when building kernel with
CC_OPTIMIZE_FOR_SIZE after this commit, ("-Os" VS no optimization)
Fixes: e05d57dcb8 ("riscv: Fixup __vdso_gettimeofday broke dynamic ftrace")
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20221031182943.2453-1-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The current implementation of the `__rt_sigaction` reference computed an
absolute offset relative to the mapped base of the VDSO. While this can
be handled in the medlow model, the medany model cannot handle this as
it is meant to be position independent. The current implementation
relied on the BFD linker relaxing the PC-relative relocation into an
absolute relocation as it was a near-zero address allowing it to be
referenced relative to `zero`.
We now extract the offsets and create a generated header allowing the
build with LLVM and lld to succeed as we no longer depend on the linker
rewriting address references near zero. This change was largely
modelled after the ARM64 target which does something similar.
Signed-off-by: Saleem Abdulrasool <abdulras@google.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Select ARCH_HAS_UBSAN_SANITIZE_ALL in order to allow the user to
enable CONFIG_UBSAN_SANITIZE_ALL and instrument the entire kernel for
ubsan checks.
VDSO is excluded because its build doesn't include the
__ubsan_handle_*() functions from lib/ubsan.c, and the VDSO has no
sane way to report errors even if it has definitions of these functions.
Passed lib/test_ubsan.c test.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Running "make" on an already compiled kernel tree will rebuild the
kernel even without any modifications:
CALL linux/scripts/checksyscalls.sh
CALL linux/scripts/atomic/check-atomics.sh
CHK include/generated/compile.h
SO2S arch/riscv/kernel/vdso/vdso-syms.S
AS arch/riscv/kernel/vdso/vdso-syms.o
AR arch/riscv/kernel/vdso/built-in.a
AR arch/riscv/kernel/built-in.a
AR arch/riscv/built-in.a
GEN .version
CHK include/generated/compile.h
UPD include/generated/compile.h
CC init/version.o
AR init/built-in.a
LD vmlinux.o
The reason is "Any target that utilizes if_changed must be listed in
$(targets), otherwise the command line check will fail, and the target
will always be built" as explained by Documentation/kbuild/makefiles.rst
Fix this build bug by adding vdso-syms.S to $(targets)
At the same time, there are two trivial clean up modifications:
- the vdso-dummy.o is not needed any more after so remove it.
- vdso.lds is a generated file, so it should be prefixed with
$(obj)/ instead of $(src)/
Fixes: c2c81bb2f6 ("RISC-V: Fix the VDSO symbol generaton for binutils-2.35+")
Cc: stable@vger.kernel.org
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Currently, the VDSO is being linked through $(CC). This does not match
how the rest of the kernel links objects, which is through the $(LD)
variable.
When linking with clang, there are a couple of warnings about flags that
will not be used during the link:
clang-12: warning: argument unused during compilation: '-no-pie' [-Wunused-command-line-argument]
clang-12: warning: argument unused during compilation: '-pg' [-Wunused-command-line-argument]
'-no-pie' was added in commit 85602bea29 ("RISC-V: build vdso-dummy.o
with -no-pie") to override '-pie' getting added to the ld command from
distribution versions of GCC that enable PIE by default. It is
technically no longer needed after commit c2c81bb2f6 ("RISC-V: Fix the
VDSO symbol generaton for binutils-2.35+"), which removed vdso-dummy.o
in favor of generating vdso-syms.S from vdso.so with $(NM) but this also
resolves the issue in case it ever comes back due to having full control
over the $(LD) command. '-pg' is for function tracing, it is not used
during linking as clang states.
These flags could be removed/filtered to fix the warnings but it is
easier to just match the rest of the kernel and use $(LD) directly for
linking. See commits
fe00e50b2d ("ARM: 8858/1: vdso: use $(LD) instead of $(CC) to link VDSO")
691efbedc6 ("arm64: vdso: use $(LD) instead of $(CC) to link VDSO")
2ff906994b ("MIPS: VDSO: Use $(LD) instead of $(CC) to link VDSO")
2b2a25845d ("s390/vdso: Use $(LD) instead of $(CC) to link vDSO")
for more information.
The flags are converted to linker flags and '--eh-frame-hdr' is added to
match what is added by GCC implicitly, which can be seen by adding '-v'
to GCC's invocation.
Additionally, since this area is being modified, use the $(OBJCOPY)
variable instead of an open coded $(CROSS_COMPILE)objcopy so that the
user's choice of objcopy binary is respected.
Link: https://github.com/ClangBuiltLinux/linux/issues/803
Link: https://github.com/ClangBuiltLinux/linux/issues/970
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Fangrui Song <maskray@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
We use the generic C VDSO implementations of a handful of clock-related
functions. When kasan is enabled this results in asan stub calls that
are unlikely to be resolved by userspace, this just disables KASAN
when building the VDSO.
Verified the fix on a kernel with KASAN enabled using vDSO selftests.
Link: https://lore.kernel.org/lkml/CACT4Y+ZNJBnkKHXUf=tm_yuowvZvHwN=0rmJ=7J+xFd+9r_6pQ@mail.gmail.com/
Tested-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
[Palmer: commit text]
Fixes: ad5d1122b8 ("riscv: use vDSO common flow to reduce the latency of the time-related functions")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Commit a968433723 ("kbuild: explicitly specify the build id style")
explicitly set the build ID style to SHA1. Commit c2c81bb2f6 ("RISC-V:
Fix the VDSO symbol generaton for binutils-2.35+") undid this change,
likely unintentionally.
Restore it so that the build ID style stays consistent across the tree
regardless of linker.
Fixes: c2c81bb2f6 ("RISC-V: Fix the VDSO symbol generaton for binutils-2.35+")
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Bill Wendling <morbo@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
We were relying on GNU ld's ability to re-link executable files in order
to extract our VDSO symbols. This behavior was deemed a bug as of
binutils-2.35 (specifically the binutils-gdb commit a87e1817a4 ("Have
the linker fail if any attempt to link in an executable is made."), but
as that has been backported to at least Debian's binutils-2.34 in may
manifest in other places.
The previous version of this was a bit of a mess: we were linking a
static executable version of the VDSO, containing only a subset of the
input symbols, which we then linked into the kernel. This worked, but
certainly wasn't a supported path through the toolchain. Instead this
new version parses the textual output of nm to produce a symbol table.
Both rely on near-zero addresses being linkable, but as we rely on weak
undefined symbols being linkable elsewhere I don't view this as a major
issue.
Fixes: e2c0cdfba7 ("RISC-V: User-facing API")
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
ld's --build-id defaults to "sha1" style, while lld defaults to "fast".
The build IDs are very different between the two, which may confuse
programs that reference them.
Signed-off-by: Bill Wendling <morbo@google.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Currently, building the vDSO with clang leads assembler errors like the
following:
/tmp/vgettimeofday-1ae0d2.s: Assembler messages:
/tmp/vgettimeofday-1ae0d2.s:28: Error: bad expression
/tmp/vgettimeofday-1ae0d2.s:28: Error: illegal operands `auipc a2,%got_pcrel_hi(__stack_chk_guard)'
Disable the stack-protector for vDSO to fix these.
Link: https://github.com/ClangBuiltLinux/linux/issues/1112
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Add ARCH_HAS_KCOV and HAVE_GCC_PLUGINS to the riscv Kconfig.
Also disable instrumentation of some early boot code and vdso.
Boot-tested on QEMU's riscv64 virt machine.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
The time related vDSO functions use a variable, vdso_data, to access the
vDSO data page to get the system time information. Because the vdso_data
for CFLAGS_vgettimeofday.o is an external variable defined in vdso.o,
the CFLAGS_vgettimeofday.o should be compiled with -fPIC to ensure
that vdso_data is addressable.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Even if RISC-V has supported the vDSO feature, the latency of the functions
for obtaining the system time is still expensive. It is because these
functions still trigger a corresponding system call in the process, which
slows down the response time. If we want to remove the system call to
reduce the latency, the kernel should have the ability to output the system
clock information to userspace. This patch introduces the vDSO common flow
to enable the kernel to achieve the above feature and uses "rdtime"
instruction to obtain the current time in the user space. Under this
condition, the latency cost by the ecall from U-mode to S-mode can be
eliminated. After applying this patch, the latency of gettimeofday()
measured on the HiFive unleashed board can be reduced by %61.
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
The Linux note in the vdso allows glibc to check the running kernel
version without having to issue the uname syscall.
Signed-off-by: Andreas Schwab <schwab@suse.de>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
When building with the LLVM linker this error occurrs:
LD arch/riscv/kernel/vdso/vdso-syms.o
ld.lld: error: no input files
This happens because the lld treats -R as an alias to -rpath, as opposed
to ld where -R means --just-symbols.
Use the long option name for compatibility between the two.
Link: https://github.com/ClangBuiltLinux/linux/issues/805
Reported-by: Dmitry Golovin <dima@golovin.in>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Ilie Halip <ilie.halip@gmail.com>
Reviewed-by: Fangrui Song <maskray@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Temporary files used in the VDSO build process linger on even after make
mrproper: vdso-dummy.o.tmp, vdso.so.dbg.tmp.
Delete them once they're no longer needed.
Signed-off-by: Ilie Halip <ilie.halip@gmail.com>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
This patch fix following perf record error by linking vdso.so with
build id.
perf.data perf.data.old
[ perf record: Woken up 1 times to write data ]
free(): double free detected in tcache 2
Aborted
perf record use filename__read_build_id(util/symbol-minimal.c) to get
build id when libelf is not supported. When vdso.so is linked without
build id, the section size of PT_NOTE will be zero, buf size will
realloc to zero and cause memory corruption.
Signed-off-by: Mao Han <han_mao@c-sky.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Towards the goal of removing cc-ldoption, it seems that --hash-style=
was added to binutils 2.17.50.0.2 in 2006. The minimal required version
of binutils for the kernel according to
Documentation/process/changes.rst is 2.20.
Link: https://gcc.gnu.org/ml/gcc/2007-01/msg01141.html
Cc: clang-built-linux@googlegroups.com
Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
We don't yet have an upstream glibc port for riscv, so there is no user
space for the existing ABI, and we can remove the definitions for 32-bit
time_t, off_t and struct resource and system calls based on them,
including the vdso.
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
If you use a 64-bit compiler to build a 32-bit kernel then you'll get an
error when building the vDSO due to a library mismatch. The happens
because the relevant "-march" argument isn't supplied to the GCC run
that generates one of the vDSO intermediate files.
I'm not actually sure what the right thing to do here is as I'm not
particularly familiar with the kernel build system. I poked the
documentation and it appears that KCFLAGS is the correct thing to do
(it's suggested that should be used when building modules), but we set
KBUILD_CFLAGS in arch/riscv/Makefile.
This does at least fix the build error.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Debian toolcahin defaults to PIE, and I guess that will also be the case
of most distributions. This causes the following build failure:
AS arch/riscv/kernel/vdso/getcpu.o
AS arch/riscv/kernel/vdso/flush_icache.o
VDSOLD arch/riscv/kernel/vdso/vdso.so.dbg
OBJCOPY arch/riscv/kernel/vdso/vdso.so
AS arch/riscv/kernel/vdso/vdso.o
VDSOLD arch/riscv/kernel/vdso/vdso-dummy.o
LD arch/riscv/kernel/vdso/vdso-syms.o
riscv64-linux-gnu-ld: attempted static link of dynamic object `arch/riscv/kernel/vdso/vdso-dummy.o'
make[2]: *** [arch/riscv/kernel/vdso/Makefile:43: arch/riscv/kernel/vdso/vdso-syms.o] Error 1
make[1]: *** [scripts/Makefile.build:575: arch/riscv/kernel/vdso] Error 2
make: *** [Makefile:1018: arch/riscv/kernel] Error 2
While the root Makefile correctly passes "-fno-PIE" to build individual
object files, the RISC-V kernel also builds vdso-dummy.o as an
executable, which is therefore linked as PIE. Fix that by updating this
specific link rule to also include "-no-pie".
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Despite RISC-V having a direct 'fence.i' instruction available to
userspace (which we can't trap!), that's not actually viable when
running on Linux because the kernel might schedule a process on another
hart. There is no way for userspace to handle this without invoking the
kernel (as it doesn't know the thread->hart mappings), so we've defined
a RISC-V specific system call to flush the instruction cache.
This patch adds both a system call and a VDSO entry. If possible, we'd
like to avoid having the system call be considered part of the
user-facing ABI and instead restrict that to the VDSO entry -- both just
in general to avoid having additional user-visible ABI to maintain, and
because we'd prefer that users just call the VDSO entry because there
might be a better way to do this in the future (ie, one that doesn't
require entering the kernel).
Signed-off-by: Andrew Waterman <andrew@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
For now these are just placeholders that execute the syscall. We will
later optimize them to avoid kernel crossings, but we'd like to have the
VDSO entries from the first released kernel version to make the ABI
simpler.
Signed-off-by: Andrew Waterman <andrew@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This patch contains code that is in some way visible to the user:
including via system calls, the VDSO, module loading and signal
handling. It also contains some generic code that is ABI visible.
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
