To incrementally implement AIA support, we first add minimal skeletal
support which only compiles and detects AIA hardware support at the
boot-time but does not provide any functionality.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
We have two extension names for AIA ISA support: Smaia (M-mode AIA CSRs)
and Ssaia (S-mode AIA CSRs).
We extend the ISA string parsing to detect Smaia and Ssaia extensions.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Conor Dooley <conor.dooley@microchip.com> says:
Here's my attempt at fixing both the use of an FPU on XIP kernels and
the issue that Jason ran into where CONFIG_FPU, which needs the
alternatives frame work for has_fpu() checks, could be enabled without
the alternatives actually being present.
For the former, a "slow" fallback that does not use alternatives is
added to riscv_has_extension_[un]likely() that can be used with XIP.
Obviously, we want to make use of Jisheng's alternatives based approach
where possible, so any users of riscv_has_extension_[un]likely() will
want to make sure that they select RISCV_ALTERNATIVE.
If they don't however, they'll hit the fallback path which (should,
sparing a silly mistake from me!) behave in the same way, thus
succeeding silently. Sounds like a
To prevent "depends on !XIP_KERNEL; select RISCV_ALTERNATIVE" spreading
like the plague through the various places that want to check for the
presence of extensions, and sidestep the potential silent "success"
mentioned above, all users RISCV_ALTERNATIVE are converted from selects
to dependencies, with the option being selected for all !XIP_KERNEL
builds.
I know that the VDSO was a key place that Jisheng wanted to use the new
helper rather than static branches, and I think the fallback path
should not cause issues there.
See the thread at [1] for the prior discussion.
1 - https://lore.kernel.org/linux-riscv/20230128172856.3814-1-jszhang@kernel.org/T/#m21390d570997145d31dd8bb95002fd61f99c6573
[Palmer: these were also merged into fixes, but there's a cleanup that
depends on the merge so I'm taking it into for-next as well.]
* b4-shazam-merge:
RISC-V: always select RISCV_ALTERNATIVE for non-xip kernels
RISC-V: add non-alternative fallback for riscv_has_extension_[un]likely()
Link: https://lore.kernel.org/r/20230324100538.3514663-1-conor.dooley@microchip.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
* commit '1ee7fc3f4d0a93831a20d5566f203d5ad6d44de8':
RISC-V: always select RISCV_ALTERNATIVE for non-xip kernels
RISC-V: add non-alternative fallback for riscv_has_extension_[un]likely()
The has_fpu() check, which in turn calls riscv_has_extension_likely(),
relies on alternatives to figure out whether the system has an FPU.
As a result, it will malfunction on XIP kernels, as they do not support
the alternatives mechanism.
When alternatives support is not present, fall back to using
__riscv_isa_extension_available() in riscv_has_extension_[un]likely()
instead stead, which handily takes the same argument, so that kernels
that do not support alternatives can accurately report the presence of
FPU support.
Fixes: 702e64550b ("riscv: fpu: switch has_fpu() to riscv_has_extension_likely()")
Link: https://lore.kernel.org/all/ad445951-3d13-4644-94d9-e0989cda39c3@spud/
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://lore.kernel.org/r/20230324100538.3514663-2-conor.dooley@microchip.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Andrew Jones <ajones@ventanamicro.com> says:
When the Zicboz extension is available we can more rapidly zero naturally
aligned Zicboz block sized chunks of memory. As pages are always page
aligned and are larger than any Zicboz block size will be, then
clear_page() appears to be a good candidate for the extension. While cycle
count and energy consumption should also be considered, we can be pretty
certain that implementing clear_page() with the Zicboz extension is a win
by comparing the new dynamic instruction count with its current count[1].
Doing so we see that the new count is just over a quarter of the old count
(see patch6's commit message for more details).
For those of you who reviewed v1[2], you may be looking for the memset()
patches. As pointed out in v1, and a couple follow-up emails, it's not
clear that patching memset() is a win yet. When I get a chance to test
on real hardware with a comprehensive benchmark collection then I can
post the memset() patches separately (assuming the benchmarks show it's
worthwhile).
* b4-shazam-merge:
RISC-V: KVM: Expose Zicboz to the guest
RISC-V: KVM: Provide UAPI for Zicboz block size
RISC-V: Use Zicboz in clear_page when available
RISC-V: cpufeatures: Put the upper 16 bits of patch ID to work
RISC-V: Add Zicboz detection and block size parsing
dt-bindings: riscv: Document cboz-block-size
RISC-V: Factor out body of riscv_init_cbom_blocksize loop
RISC-V: alternatives: Support patching multiple insns in assembly
Link: https://lore.kernel.org/r/20230224162631.405473-1-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Parse "riscv,cboz-block-size" from the DT by piggybacking on Zicbom's
riscv_init_cbom_blocksize(). Additionally check the DT for the presence
of the "zicboz" extension and, when it's present, validate the parsed
cboz block size as we do Zicbom's cbom block size with
riscv_isa_extension_check().
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230224162631.405473-5-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Qinglin Pan <panqinglin00@gmail.com> says:
Svnapot is a RISC-V extension for marking contiguous 4K pages as a non-4K
page. This patch set is for using Svnapot in hugetlb fs and huge vmap.
This patchset adds a Kconfig item for using Svnapot in
"Platform type"->"SVNAPOT extension support". Its default value is on,
and people can set it off if they don't allow kernel to detect Svnapot
hardware support and leverage it.
Tested on:
- qemu rv64 with "Svnapot support" off and svnapot=true.
- qemu rv64 with "Svnapot support" on and svnapot=true.
- qemu rv64 with "Svnapot support" off and svnapot=false.
- qemu rv64 with "Svnapot support" on and svnapot=false.
* b4-shazam-merge:
riscv: mm: support Svnapot in huge vmap
riscv: mm: support Svnapot in hugetlb page
riscv: mm: modify pte format for Svnapot
Link: https://lore.kernel.org/r/20230209131647.17245-1-panqinglin00@gmail.com
[Palmer: fix up the feature ordering in the merge]
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Add one alternative to enable/disable svnapot support, enable this static
key when "svnapot" is in the "riscv,isa" field of fdt and SVNAPOT compile
option is set. It will influence the behavior of has_svnapot. All code
dependent on svnapot should make sure that has_svnapot return true firstly.
Modify PTE definition for Svnapot, and creates some functions in pgtable.h
to mark a PTE as napot and check if it is a Svnapot PTE. Until now, only
64KB napot size is supported in spec, so some macros has only 64KB version.
Signed-off-by: Qinglin Pan <panqinglin00@gmail.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20230209131647.17245-2-panqinglin00@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
There's a bunch of fixes/cleanups throughout the tree as usual, but we
also have a handful of new features.
* Various improvements to the extension detection and alternative
patching infrastructure.
* Zbb-optimized string routines.
* Support for cpu-capacity in the RISC-V DT bindings.
* Zicbom no longer depends on toolchain support.
* Some performance and code size improvements to ftrace.
* Support for ARCH_WANT_LD_ORPHAN_WARN.
* Oops now contain the faulting instruction.
-----BEGIN PGP SIGNATURE-----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=XgYl
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.3-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
"There's a bunch of fixes/cleanups throughout the tree as usual, but we
also have a handful of new features:
- Various improvements to the extension detection and alternative
patching infrastructure
- Zbb-optimized string routines
- Support for cpu-capacity in the RISC-V DT bindings
- Zicbom no longer depends on toolchain support
- Some performance and code size improvements to ftrace
- Support for ARCH_WANT_LD_ORPHAN_WARN
- Oops now contain the faulting instruction"
* tag 'riscv-for-linus-6.3-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (67 commits)
RISC-V: add a spin_shadow_stack declaration
riscv: mm: hugetlb: Enable ARCH_WANT_HUGETLB_PAGE_OPTIMIZE_VMEMMAP
riscv: Add header include guards to insn.h
riscv: alternative: proceed one more instruction for auipc/jalr pair
riscv: Avoid enabling interrupts in die()
riscv, mm: Perform BPF exhandler fixup on page fault
RISC-V: take text_mutex during alternative patching
riscv: hwcap: Don't alphabetize ISA extension IDs
RISC-V: fix ordering of Zbb extension
riscv: jump_label: Fixup unaligned arch_static_branch function
RISC-V: Only provide the single-letter extensions in HWCAP
riscv: mm: fix regression due to update_mmu_cache change
scripts/decodecode: Add support for RISC-V
riscv: Add instruction dump to RISC-V splats
riscv: select ARCH_WANT_LD_ORPHAN_WARN for !XIP_KERNEL
riscv: vmlinux.lds.S: explicitly catch .init.bss sections from EFI stub
riscv: vmlinux.lds.S: explicitly catch .riscv.attributes sections
riscv: vmlinux.lds.S: explicitly catch .rela.dyn symbols
riscv: lds: define RUNTIME_DISCARD_EXIT
RISC-V: move some stray __RISCV_INSN_FUNCS definitions from kprobes
...
While the comment above the ISA extension ID definitions says
"Entries are sorted alphabetically.", this stopped being good
advice with commit d8a3d8a752 ("riscv: hwcap: make ISA extension
ids can be used in asm"), as we now use macros instead of enums.
Reshuffling defines is error-prone, so, since they don't need to be
in any particular order, change the advice to just adding new
extensions at the bottom. Also, take the opportunity to change
spaces to tabs, merge three comments into one, and move the base
and max defines into more logical locations wrt the ID definitions.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230209123636.123537-1-ajones@ventanamicro.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The recent refactoring led to us leaking some HWCAP bits to userspace
that didn't make much sense. With any luck we'll have a better scheme
soon, but for now just mask off those bits to avoid polluting userspace.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230202233832.11036-1-palmer@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Jisheng Zhang <jszhang@kernel.org> says:
Generally, riscv ISA extensions are fixed for any specific hardware
platform, so a hart's features won't change after booting, this
chacteristic makes it straightforward to use a static branch to check
a specific ISA extension is supported or not to optimize performance.
However, some ISA extensions such as SVPBMT and ZICBOM are handled
via. the alternative sequences.
Basically, for ease of maintenance, we prefer to use static branches
in C code, but recently, Samuel found that the static branch usage in
cpu_relax() breaks building with CONFIG_CC_OPTIMIZE_FOR_SIZE[1]. As
Samuel pointed out, "Having a static branch in cpu_relax() is
problematic because that function is widely inlined, including in some
quite complex functions like in the VDSO. A quick measurement shows
this static branch is responsible by itself for around 40% of the jump
table."
Samuel's findings pointed out one of a few downsides of static branches
usage in C code to handle ISA extensions detected at boot time:
static branch's metadata in the __jump_table section, which is not
discarded after ISA extensions are finalized, wastes some space.
I want to try to solve the issue for all possible dynamic handling of
ISA extensions at boot time. Inspired by Mark[2], this patch introduces
riscv_has_extension_*() helpers, which work like static branches but
are patched using alternatives, thus the metadata can be freed after
patching.
[1]https://lore.kernel.org/linux-riscv/20220922060958.44203-1-samuel@sholland.org/
[2]https://lore.kernel.org/linux-arm-kernel/20220912162210.3626215-8-mark.rutland@arm.com/
[3]https://lore.kernel.org/linux-riscv/20221130225614.1594256-1-heiko@sntech.de/
* b4-shazam-merge:
riscv: remove riscv_isa_ext_keys[] array and related usage
riscv: KVM: Switch has_svinval() to riscv_has_extension_unlikely()
riscv: cpu_relax: switch to riscv_has_extension_likely()
riscv: alternative: patch alternatives in the vDSO
riscv: switch to relative alternative entries
riscv: module: Add ADD16 and SUB16 rela types
riscv: module: move find_section to module.h
riscv: fpu: switch has_fpu() to riscv_has_extension_likely()
riscv: introduce riscv_has_extension_[un]likely()
riscv: cpufeature: extend riscv_cpufeature_patch_func to all ISA extensions
riscv: hwcap: make ISA extension ids can be used in asm
riscv: cpufeature: detect RISCV_ALTERNATIVES_EARLY_BOOT earlier
riscv: move riscv_noncoherent_supported() out of ZICBOM probe
Link: https://lore.kernel.org/r/20230128172856.3814-1-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
All users have switched to riscv_has_extension_*, remove unused
definitions, vars and related setting code.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20230128172856.3814-14-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Generally, riscv ISA extensions are fixed for any specific hardware
platform, so a hart's features won't change after booting. This
chacteristic makes it straightforward to use a static branch to check
if a specific ISA extension is supported or not to optimize
performance.
However, some ISA extensions such as SVPBMT and ZICBOM are handled
via. the alternative sequences.
Basically, for ease of maintenance, we prefer to use static branches
in C code, but recently, Samuel found that the static branch usage in
cpu_relax() breaks building with CONFIG_CC_OPTIMIZE_FOR_SIZE[1]. As
Samuel pointed out, "Having a static branch in cpu_relax() is
problematic because that function is widely inlined, including in some
quite complex functions like in the VDSO. A quick measurement shows
this static branch is responsible by itself for around 40% of the jump
table."
Samuel's findings pointed out one of a few downsides of static branches
usage in C code to handle ISA extensions detected at boot time:
static branch's metadata in the __jump_table section, which is not
discarded after ISA extensions are finalized, wastes some space.
I want to try to solve the issue for all possible dynamic handling of
ISA extensions at boot time. Inspired by Mark[2], this patch introduces
riscv_has_extension_*() helpers, which work like static branches but
are patched using alternatives, thus the metadata can be freed after
patching.
Link: https://lore.kernel.org/linux-riscv/20220922060958.44203-1-samuel@sholland.org/ [1]
Link: https://lore.kernel.org/linux-arm-kernel/20220912162210.3626215-8-mark.rutland@arm.com/ [2]
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230128172856.3814-6-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
So that ISA extensions can be used in assembly files, convert the
multi-letter RISC-V ISA extension IDs enums to macros.
In order to make them visible, move the #ifndef __ASSEMBLY__ guard
to a later point in the header
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230128172856.3814-4-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This is a single fix, but it conflicts with some recent features. I'm
merging it on top of the commit it fixes to ease backporting.
* b4-shazam-merge:
riscv: Fix build with CONFIG_CC_OPTIMIZE_FOR_SIZE=y
Link: https://lore.kernel.org/r/20220922060958.44203-1-samuel@sholland.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
commit 8eb060e101 ("arch/riscv: add Zihintpause support") broke
building with CONFIG_CC_OPTIMIZE_FOR_SIZE enabled (gcc 11.1.0):
CC arch/riscv/kernel/vdso/vgettimeofday.o
In file included from <command-line>:
./arch/riscv/include/asm/jump_label.h: In function 'cpu_relax':
././include/linux/compiler_types.h:285:33: warning: 'asm' operand 0 probably does not match constraints
285 | #define asm_volatile_goto(x...) asm goto(x)
| ^~~
./arch/riscv/include/asm/jump_label.h:41:9: note: in expansion of macro 'asm_volatile_goto'
41 | asm_volatile_goto(
| ^~~~~~~~~~~~~~~~~
././include/linux/compiler_types.h:285:33: error: impossible constraint in 'asm'
285 | #define asm_volatile_goto(x...) asm goto(x)
| ^~~
./arch/riscv/include/asm/jump_label.h:41:9: note: in expansion of macro 'asm_volatile_goto'
41 | asm_volatile_goto(
| ^~~~~~~~~~~~~~~~~
make[1]: *** [scripts/Makefile.build:249: arch/riscv/kernel/vdso/vgettimeofday.o] Error 1
make: *** [arch/riscv/Makefile:128: vdso_prepare] Error 2
Having a static branch in cpu_relax() is problematic because that
function is widely inlined, including in some quite complex functions
like in the VDSO. A quick measurement shows this static branch is
responsible by itself for around 40% of the jump table.
Drop the static branch, which ends up being the same number of
instructions anyway. If Zihintpause is supported, we trade the nop from
the static branch for a div. If Zihintpause is unsupported, we trade the
jump from the static branch for (what gets interpreted as) a nop.
Fixes: 8eb060e101 ("arch/riscv: add Zihintpause support")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Add handling for ZBB extension and add support for using it as a
variant for optimized string functions.
Support for the Zbb-str-variants is limited to the GNU-assembler
for now, as LLVM has not yet acquired the functionality to
selectively change the arch option in assembler code.
This is still under review at
https://reviews.llvm.org/D123515
Co-developed-by: Christoph Muellner <christoph.muellner@vrull.eu>
Signed-off-by: Christoph Muellner <christoph.muellner@vrull.eu>
Signed-off-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230113212301.3534711-3-heiko@sntech.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This cleans up the ISA string handling to more closely match a version
of the ISA spec. This is visible in /proc/cpuinfo and the ordering
changes may break something in userspace, but these orderings have
changed before without issues so with any luck that's still the case.
This also adds documentation so userspace has a better idea of what is
intended when it comes to compatibility for /proc/cpuinfo, which should
help everyone as this will likely keep changing.
* b4-shazam-merge:
Documentation: riscv: add a section about ISA string ordering in /proc/cpuinfo
RISC-V: resort all extensions in consistent orders
RISC-V: clarify ISA string ordering rules in cpu.c
Link: https://lore.kernel.org/r/20221205144525.2148448-1-conor.dooley@microchip.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Ordering between each and every list of extensions is wildly
inconsistent. Per discussion on the lists pick the following policy:
- The array defining order in /proc/cpuinfo follows a narrow
interpretation of the ISA specifications, described in a comment
immediately presiding it.
- All other lists of extensions are sorted alphabetically.
This will hopefully allow for easier review & future additions, and
reduce conflicts between patchsets as the number of extensions grows.
Link: https://lore.kernel.org/all/20221129144742.2935581-2-conor.dooley@microchip.com/
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20221205144525.2148448-3-conor.dooley@microchip.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Add a static assert to ensure a RISCV_ISA_EXT_* enum is never
created with a value >= RISCV_ISA_EXT_MAX. We can do this by
putting RISCV_ISA_EXT_ID_MAX to more work. Before it was
redundant with RISCV_ISA_EXT_MAX and hence only used to
document the limit. Now it grows with the enum and is used to
check the limit.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20221201113750.18021-1-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Just like other ISA extensions, we allow callers/users to detect the
presence of Svinval extension from ISA string.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
This series implements Sstc extension support which was ratified
recently. Before the Sstc extension, an SBI call is necessary to
generate timer interrupts as only M-mode have access to the timecompare
registers. Thus, there is significant latency to generate timer
interrupts at kernel. For virtualized enviornments, its even worse as
the KVM handles the SBI call and uses a software timer to emulate the
timecomapre register.
Sstc extension solves both these problems by defining a
stimecmp/vstimecmp at supervisor (host/guest) level. It allows kernel to
program a timer and recieve interrupt without supervisor execution
enviornment (M-mode/HS mode) intervention.
* palmer/riscv-sstc:
RISC-V: Prefer sstc extension if available
RISC-V: Enable sstc extension parsing from DT
RISC-V: Add SSTC extension CSR details
The ISA extension framework now allows parsing any multi-letter
ISA extension.
Enable that for sstc extension.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20220722165047.519994-3-atishp@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The Zicbom ISA-extension was ratified in november 2021
and introduces instructions for dcache invalidate, clean
and flush operations.
Implement cache management operations for non-coherent devices
based on them.
Of course not all cores will support this, so implement an
alternative-based mechanism that replaces empty instructions
with ones done around Zicbom instructions.
As discussed in previous versions, assume the platform
being coherent by default so that non-coherent devices need
to get marked accordingly by firmware.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20220706231536.2041855-4-heiko@sntech.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Currently, riscv has several extensions which may not be supported on
all riscv platforms, for example, FPU and so on. To support unified
kernel Image style, we need to check whether the feature is supported
or not. If the check sits at hot code path, then performance will be
impacted a lot. static key can be used to solve the issue. In the past,
FPU support has been converted to use static key mechanism. I believe
we will have similar cases in the future.
This patch tries to add an unified mechanism to use static keys for
some ISA extensions by implementing an array of default-false static keys
and enabling them when detected.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20220522153543.2656-2-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Svpbmt (the S should be capitalized) is the
"Supervisor-mode: page-based memory types" extension
that specifies attributes for cacheability, idempotency
and ordering.
The relevant settings are done in special bits in PTEs:
Here is the svpbmt PTE format:
| 63 | 62-61 | 60-8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0
N MT RSW D A G U X W R V
^
Of the Reserved bits [63:54] in a leaf PTE, the high bit is already
allocated (as the N bit), so bits [62:61] are used as the MT (aka
MemType) field. This field specifies one of three memory types that
are close equivalents (or equivalent in effect) to the three main x86
and ARMv8 memory types - as shown in the following table.
RISC-V
Encoding &
MemType RISC-V Description
---------- ------------------------------------------------
00 - PMA Normal Cacheable, No change to implied PMA memory type
01 - NC Non-cacheable, idempotent, weakly-ordered Main Memory
10 - IO Non-cacheable, non-idempotent, strongly-ordered I/O memory
11 - Rsvd Reserved for future standard use
As the extension will not be present on all implementations,
implement a method to handle cpufeatures via alternatives
to not incur runtime penalties on cpu variants not supporting
specific extensions and patch relevant code parts at runtime.
Co-developed-by: Wei Fu <wefu@redhat.com>
Signed-off-by: Wei Fu <wefu@redhat.com>
Co-developed-by: Liu Shaohua <liush@allwinnertech.com>
Signed-off-by: Liu Shaohua <liush@allwinnertech.com>
Co-developed-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Guo Ren <guoren@kernel.org>
[moved to use the alternatives mechanism]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Link: https://lore.kernel.org/r/20220511192921.2223629-10-heiko@sntech.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The sscofpmf extension allows counter overflow and filtering for
programmable counters. Enable the perf driver to handle the overflow
interrupt. The overflow interrupt is a hart local interrupt.
Thus, per cpu overflow interrupts are setup as a child under the root
INTC irq domain.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Currently, the /proc/cpuinfo outputs the entire riscv,isa string which
is not ideal when we have multiple ISA extensions present in the ISA
string. Some of them may not be enabled in kernel as well.
Same goes for the single letter extensions as well which prints the
entire ISA string. Some of they may not be valid ISA extensions as
well (e.g 'su')
Parse only the valid & enabled ISA extension and print them.
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Multi-letter extensions can be probed using exising
riscv_isa_extension_available API now. It doesn't support versioning
right now as there is no use case for it.
Individual extension specific implementation will be added during
each extension support.
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This patch adds riscv_isa bitmap which represents Host ISA features
common across all Host CPUs. The riscv_isa is not same as elf_hwcap
because elf_hwcap will only have ISA features relevant for user-space
apps whereas riscv_isa will have ISA features relevant to both kernel
and user-space apps.
One of the use-case for riscv_isa bitmap is in KVM hypervisor where
we will use it to do following operations:
1. Check whether hypervisor extension is available
2. Find ISA features that need to be virtualized (e.g. floating
point support, vector extension, etc.)
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
There are many different formats in each header now, such as
_ASM_XXX_H, __ASM_XXX_H, _ASM_RISCV_XXX_H, RISCV_XXX_H, etc., This patch
tries to unify the format by using _ASM_RISCV_XXX_H, because the most
header use it now. This patch also adds the conditional to the headers
if they lost it.
Signed-off-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not see http www gnu org
licenses
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 503 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Enrico Weigelt <info@metux.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190602204653.811534538@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch contains the code that interfaces with ELF objects on RISC-V
systems, the vast majority of which is present to load kernel modules.
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
