mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
synced 2025-09-01 15:14:52 +00:00
loongarch-next
27906 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Thorsten Blum
|
f15e87340a |
powerpc/iommu: Use str_disabled_enabled() helper
Remove hard-coded strings by using the str_disabled_enabled() helper. Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250210224246.363318-1-thorsten.blum@linux.dev |
||
|
Thorsten Blum
|
f36a28192e |
powerpc/powermac: Use str_enabled_disabled() and str_on_off() helpers
Remove hard-coded strings by using the str_enabled_disabled() and str_on_off() helper functions. Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250117114625.64903-2-thorsten.blum@linux.dev |
||
|
Thorsten Blum
|
ff27a9a0c6 |
powerpc/mm/fault: Use str_write_read() helper function
Remove hard-coded strings by using the str_write_read() helper function. Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250210100648.1440-2-thorsten.blum@linux.dev |
||
|
Thorsten Blum
|
7e99a4a60d |
powerpc: Replace strcpy() with strscpy() in proc_ppc64_init()
strcpy() is deprecated; use strscpy() instead. Don't cast the destination buffer from 'u8[]' to 'char *' to satisfy the __must_be_array() requirement of strscpy(). No functional changes intended. Link: https://github.com/KSPP/linux/issues/88 Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250421183110.436265-1-thorsten.blum@linux.dev |
||
|
Gaurav Batra
|
d36e3f11fe |
powerpc/pseries/iommu: Fix kmemleak in TCE table userspace view
When a device is opened by a userspace driver, via VFIO interface, DMA
window is created. This DMA window has TCE Table and a corresponding
data for userview of TCE table.
When the userspace driver closes the device, all the above infrastructure
is free'ed and the device control given back to kernel. Both DMA window
and TCE table is getting free'ed. But due to a code bug, userview of the
TCE table is not getting free'ed. This is resulting in a memory leak.
Befow is the information from KMEMLEAK
unreferenced object 0xc008000022af0000 (size 16777216):
comm "senlib_unit_tes", pid 9346, jiffies 4294983174
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc 0):
kmemleak_vmalloc+0xc8/0x1a0
__vmalloc_node_range+0x284/0x340
vzalloc+0x58/0x70
spapr_tce_create_table+0x4b0/0x8d0
tce_iommu_create_table+0xcc/0x170 [vfio_iommu_spapr_tce]
tce_iommu_create_window+0x144/0x2f0 [vfio_iommu_spapr_tce]
tce_iommu_ioctl.part.0+0x59c/0xc90 [vfio_iommu_spapr_tce]
vfio_fops_unl_ioctl+0x88/0x280 [vfio]
sys_ioctl+0xf4/0x160
system_call_exception+0x164/0x310
system_call_vectored_common+0xe8/0x278
unreferenced object 0xc008000023b00000 (size 4194304):
comm "senlib_unit_tes", pid 9351, jiffies 4294984116
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc 0):
kmemleak_vmalloc+0xc8/0x1a0
__vmalloc_node_range+0x284/0x340
vzalloc+0x58/0x70
spapr_tce_create_table+0x4b0/0x8d0
tce_iommu_create_table+0xcc/0x170 [vfio_iommu_spapr_tce]
tce_iommu_create_window+0x144/0x2f0 [vfio_iommu_spapr_tce]
tce_iommu_create_default_window+0x88/0x120 [vfio_iommu_spapr_tce]
tce_iommu_ioctl.part.0+0x57c/0xc90 [vfio_iommu_spapr_tce]
vfio_fops_unl_ioctl+0x88/0x280 [vfio]
sys_ioctl+0xf4/0x160
system_call_exception+0x164/0x310
system_call_vectored_common+0xe8/0x278
Fixes:
|
||
|
Herbert Xu
|
c66d7ebbe2 |
crypto: powerpc/poly1305 - Add SIMD fallback
Add a SIMD fallback path for poly1305-p10 by converting the 2^64
based hash state into a 2^44 base. In order to ensure that the
generic fallback is actually 2^44, add ARCH_SUPPORTS_INT128 to
powerpc and make poly1305-p10 depend on it.
Fixes:
|
||
|
Madhavan Srinivasan
|
93bd4a80ef |
powerpc/kernel: Fix ppc_save_regs inclusion in build
Recent patch fixed an old commit
'fc2a5a6161a2 ("powerpc/64s: ppc_save_regs is now needed for all 64s builds")'
which is to include building of ppc_save_reg.c only when XMON
and KEXEC_CORE and PPC_BOOK3S are enabled. This was valid, since
ppc_save_regs was called only in replay_system_reset() of old
irq.c which was under BOOK3S.
But there has been multiple refactoring of irq.c and have
added call to ppc_save_regs() from __replay_soft_interrupts
-> replay_soft_interrupts which is part of irq_64.c included
under CONFIG_PPC64. And since ppc_save_regs is called in
CRASH_DUMP path as part of crash_setup_regs in kexec.h,
CONFIG_PPC32 also needs it.
So with this recent patch which enabled the building of
ppc_save_regs.c caused a build break when none of these
(XMON, KEXEC_CORE, BOOK3S) where enabled as part of config.
Patch to enable building of ppc_save_regs.c by defaults.
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250511041111.841158-1-maddy@linux.ibm.com
|
||
|
Thorsten Blum
|
8bc3252436 |
powerpc: Transliterate author name and remove FIXME
The name is Mimi Phuong-Thao Vo. Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20241110162139.5179-2-thorsten.blum@linux.dev |
||
|
Eric Biggers
|
3357b6c945 |
crypto: tcrypt - rename CRYPTO_TEST to CRYPTO_BENCHMARK
tcrypt is actually a benchmarking module and not the actual tests. This regularly causes confusion. Update the kconfig option name and help text accordingly. Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Eric Biggers
|
bdc2a55687 |
crypto: lib/chacha - add array bounds to function prototypes
Add explicit array bounds to the function prototypes for the parameters that didn't already get handled by the conversion to use chacha_state: - chacha_block_*(): Change 'u8 *out' or 'u8 *stream' to u8 out[CHACHA_BLOCK_SIZE]. - hchacha_block_*(): Change 'u32 *out' or 'u32 *stream' to u32 out[HCHACHA_OUT_WORDS]. - chacha_init(): Change 'const u32 *key' to 'const u32 key[CHACHA_KEY_WORDS]'. Change 'const u8 *iv' to 'const u8 iv[CHACHA_IV_SIZE]'. No functional changes. This just makes it clear when fixed-size arrays are expected. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Eric Biggers
|
98066f2f89 |
crypto: lib/chacha - strongly type the ChaCha state
The ChaCha state matrix is 16 32-bit words. Currently it is represented
in the code as a raw u32 array, or even just a pointer to u32. This
weak typing is error-prone. Instead, introduce struct chacha_state:
struct chacha_state {
u32 x[16];
};
Convert all ChaCha and HChaCha functions to use struct chacha_state.
No functional changes.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
||
|
Athira Rajeev
|
2c54e43157 |
powerpc/pseries/htmdump: Include header file to get is_kvm_guest() definition
htmdump_init calls is_kvm_guest() to check for guest environment.
is_kvm_guest() is defined in kvm_guest.h header file. Without including
the header file, build hits error failing to find the function.
arch/powerpc/platforms/pseries/htmdump.c: In function 'htmdump_init':
arch/powerpc/platforms/pseries/htmdump.c:469:6: error: implicit declaration of function 'is_kvm_guest';
did you mean '__key_get'? [-Werror=implicit-function-declaration]
if (is_kvm_guest()) {
^~~~~~~~~~~~
__key_get
This is observed in configs where CONFIG_KVM_GUEST is disabled.
Include header file explicitly to avoid the build error
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202505061324.elUl4njU-lkp@intel.com/
Signed-off-by: Athira Rajeev <atrajeev@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250506135232.69014-1-atrajeev@linux.ibm.com
|
||
|
Amit Machhiwal
|
ccdb36cbe6 |
KVM: PPC: Book3S HV: Fix IRQ map warnings with XICS on pSeries KVM Guest
The commit |
||
|
Christophe Leroy
|
f9cb1476ad |
powerpc/8xx: Reduce alignment constraint for kernel memory
8xx has three large page sizes: 8M, 512k and 16k. A too big alignment can lead to wasting memory. On a board which has only 32 MBytes of RAM, every single byte is worth it and a 512k alignment is sometimes too much. Allow mapping kernel memory with 16k pages and reduce the constraint on kernel memory alignment. 512k and 16k pages are handled the same way so reverse tests in order to make 8M pages the special case and other ones (512k and 16k) the alternative. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/fa9927b70df13627cdf10b992ea71d6562c7760e.1746191262.git.christophe.leroy@csgroup.eu |
||
|
Kevin Brodsky
|
8e8299bf38 |
powerpc: mm: call ctor/dtor for kernel PTEs
The generic implementation of pte_{alloc_one,free}_kernel now calls the
[cd]tor, without initialising the ptlock needlessly as
pagetable_pte_ctor() skips it for init_mm.
On powerpc, all functions related to PTE allocation are implemented by
common helpers, which are passed a boolean to differentiate user from
kernel pgtables. This patch aligns the powerpc implementation with the
generic one by calling pagetable_pte_[cd]tor() unconditionally in those
helpers.
Link: https://lkml.kernel.org/r/20250408095222.860601-6-kevin.brodsky@arm.com
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Linus Waleij <linus.walleij@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: <x86@kernel.org>
Cc: Yang Shi <yang@os.amperecomputing.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
||
|
Kevin Brodsky
|
d82d3bf411 |
mm: pass mm down to pagetable_{pte,pmd}_ctor
Patch series "Always call constructor for kernel page tables", v2.
There has been much confusion around exactly when page table
constructors/destructors (pagetable_*_[cd]tor) are supposed to be called.
They were initially introduced for user PTEs only (to support split page
table locks), then at the PMD level for the same purpose. Accounting was
added later on, starting at the PTE level and then moving to higher levels
(PMD, PUD). Finally, with my earlier series "Account page tables at all
levels" [1], the ctor/dtor is run for all levels, all the way to PGD.
I thought this was the end of the story, and it hopefully is for user
pgtables, but I was wrong for what concerns kernel pgtables. The current
situation there makes very little sense:
* At the PTE level, the ctor/dtor is not called (at least in the generic
implementation). Specific helpers are used for kernel pgtables at this
level (pte_{alloc,free}_kernel()) and those have never called the
ctor/dtor, most likely because they were initially irrelevant in the
kernel case.
* At all other levels, the ctor/dtor is normally called. This is
potentially wasteful at the PMD level (more on that later).
This series aims to ensure that the ctor/dtor is always called for kernel
pgtables, as it already is for user pgtables. Besides consistency, the
main motivation is to guarantee that ctor/dtor hooks are systematically
called; this makes it possible to insert hooks to protect page tables [2],
for instance. There is however an extra challenge: split locks are not
used for kernel pgtables, and it would therefore be wasteful to initialise
them (ptlock_init()).
It is worth clarifying exactly when split locks are used. They clearly
are for user pgtables, but as illustrated in commit
|
||
|
Anshuman Khandual
|
e064e7384f |
mm/ptdump: split note_page() into level specific callbacks
Patch series "mm/ptdump: Drop assumption that pxd_val() is u64", v2. Last argument passed down in note_page() is u64 assuming pxd_val() returned value (all page table levels) is 64 bit - which might not be the case going ahead when D128 page tables is enabled on arm64 platform. Besides pxd_val() is very platform specific and its type should not be assumed in generic MM. A similar problem exists for effective_prot(), although it is restricted to x86 platform. This series splits note_page() and effective_prot() into individual page table level specific callbacks which accepts corresponding pxd_t page table entry as an argument instead and later on all subscribing platforms could derive pxd_val() from the table entries as required and proceed as before. Define ptdesc_t type which describes the basic page table descriptor layout on arm64 platform. Subsequently all level specific pxxval_t descriptors are derived from ptdesc_t thus establishing a common original format, which can also be appropriate for page table entries, masks and protection values etc which are used at all page table levels. This patch (of 3): Last argument passed down in note_page() is u64 assuming pxd_val() returned value (all page table levels) is 64 bit - which might not be the case going ahead when D128 page tables is enabled on arm64 platform. Besides pxd_val() is very platform specific and its type should not be assumed in generic MM. Split note_page() into individual page table level specific callbacks which accepts corresponding pxd_t argument instead and then subscribing platforms just derive pxd_val() from the entries as required and proceed as earlier. Also add a note_page_flush() callback for flushing the last page table page that was being handled earlier via level = -1. Link: https://lkml.kernel.org/r/20250407053113.746295-1-anshuman.khandual@arm.com Link: https://lkml.kernel.org/r/20250407053113.746295-2-anshuman.khandual@arm.com Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Dmitry V. Levin
|
cc6622730b |
syscall.h: introduce syscall_set_nr()
Similar to syscall_set_arguments() that complements syscall_get_arguments(), introduce syscall_set_nr() that complements syscall_get_nr(). syscall_set_nr() is going to be needed along with syscall_set_arguments() on all HAVE_ARCH_TRACEHOOK architectures to implement PTRACE_SET_SYSCALL_INFO API. Link: https://lkml.kernel.org/r/20250303112020.GD24170@strace.io Signed-off-by: Dmitry V. Levin <ldv@strace.io> Tested-by: Charlie Jenkins <charlie@rivosinc.com> Reviewed-by: Charlie Jenkins <charlie@rivosinc.com> Acked-by: Helge Deller <deller@gmx.de> # parisc Reviewed-by: Maciej W. Rozycki <macro@orcam.me.uk> # mips Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Alexey Gladkov (Intel) <legion@kernel.org> Cc: Andreas Larsson <andreas@gaisler.com> Cc: anton ivanov <anton.ivanov@cambridgegreys.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Betkov <bp@alien8.de> Cc: Brian Cain <bcain@quicinc.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christian Zankel <chris@zankel.net> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Davide Berardi <berardi.dav@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Eugene Syromiatnikov <esyr@redhat.com> Cc: Eugene Syromyatnikov <evgsyr@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Jonas Bonn <jonas@southpole.se> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Naveen N Rao <naveen@kernel.org> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Renzo Davoi <renzo@cs.unibo.it> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russel King <linux@armlinux.org.uk> Cc: Shuah Khan <shuah@kernel.org> Cc: Stafford Horne <shorne@gmail.com> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Thomas Gleinxer <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vineet Gupta <vgupta@kernel.org> Cc: WANG Xuerui <kernel@xen0n.name> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Dmitry V. Levin
|
17fc7b8f9b |
syscall.h: add syscall_set_arguments()
This function is going to be needed on all HAVE_ARCH_TRACEHOOK
architectures to implement PTRACE_SET_SYSCALL_INFO API.
This partially reverts commit
|
||
|
Matthew Wilcox (Oracle)
|
5071ea3d7b |
arch: remove mk_pmd()
There are now no callers of mk_huge_pmd() and mk_pmd(). Remove them. Link: https://lkml.kernel.org/r/20250402181709.2386022-12-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Zi Yan <ziy@nvidia.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Andreas Larsson <andreas@gaisler.com> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Muchun Song <muchun.song@linux.dev> Cc: Richard Weinberger <richard@nod.at> Cc: <x86@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Matthew Wilcox (Oracle)
|
cb5b13cd6c |
mm: introduce a common definition of mk_pte()
Most architectures simply call pfn_pte(). Centralise that as the normal definition and remove the definition of mk_pte() from the architectures which have either that exact definition or something similar. Link: https://lkml.kernel.org/r/20250402181709.2386022-3-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> # s390 Cc: Zi Yan <ziy@nvidia.com> Cc: Andreas Larsson <andreas@gaisler.com> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Muchun Song <muchun.song@linux.dev> Cc: Richard Weinberger <richard@nod.at> Cc: <x86@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Herbert Xu
|
7916eddc53 |
crypto: powerpc/poly1305 - Add poly1305_emit_arch wrapper
Add poly1305_emit_arch with fallback instead of calling assembly
directly. This is because the state format differs between p10
and that of the generic implementation.
Reported-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Reported-by: Eric Biggers <ebiggers@google.com>
Fixes:
|
||
|
Eric Biggers
|
648c7fb16f |
lib/crc: make arch-optimized code use subsys_initcall
Make the architecture-optimized CRC code do its CPU feature checks in subsys_initcalls instead of arch_initcalls. This makes it consistent with arch/*/lib/crypto/ and ensures that it runs after initcalls that possibly could be a prerequisite for kernel-mode FPU, such as x86's xfd_update_static_branch() and loongarch's init_euen_mask(). Note: as far as I can tell, x86's xfd_update_static_branch() isn't *actually* needed for kernel-mode FPU. loongarch's init_euen_mask() is needed to enable save/restore of the vector registers, but loongarch doesn't yet have any CRC or crypto code that uses vector registers anyway. Regardless, let's be consistent with arch/*/lib/crypto/ and robust against any potential future dependency on an arch_initcall. Link: https://lore.kernel.org/r/20250510035959.87995-1-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> |
||
|
Ingo Molnar
|
220beffd36 |
timers: Rename NEXT_TIMER_MAX_DELTA as TIMER_NEXT_MAX_DELTA
Move this macro to the canonical TIMER_* namespace. Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/20250507175338.672442-7-mingo@kernel.org |
||
|
Herbert Xu
|
3bbc902ece |
crypto: powerpc/poly1305 - Add missing poly1305_emit_arch
Rename poly1305_emit_64 to poly1305_emit_arch to conform with
the expectation of the poly1305 library.
Reported-by: Thorsten Leemhuis <linux@leemhuis.info>
Fixes:
|
||
|
Michal Suchanek
|
5a821e2d69 |
powerpc/boot: Fix build with gcc 15
Similar to x86 the ppc boot code does not build with GCC 15.
Copy the fix from
commit
|
||
|
Herbert Xu
|
67488527af |
crypto: arch/sha256 - Export block functions as GPL only
Export the block functions as GPL only, there is no reason to let arbitrary modules use these internal functions. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Herbert Xu
|
ef93f15628 |
Revert "crypto: run initcalls for generic implementations earlier"
This reverts commit
|
||
|
Eric Biggers
|
1a49c573bf |
crypto: powerpc/sha256 - implement library instead of shash
Instead of providing crypto_shash algorithms for the arch-optimized SHA-256 code, instead implement the SHA-256 library. This is much simpler, it makes the SHA-256 library functions be arch-optimized, and it fixes the longstanding issue where the arch-optimized SHA-256 was disabled by default. SHA-256 still remains available through crypto_shash, but individual architectures no longer need to handle it. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Herbert Xu
|
10a6d72ea3 |
crypto: lib/poly1305 - Use block-only interface
Now that every architecture provides a block function, use that to implement the lib/poly1305 and remove the old per-arch code. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Herbert Xu
|
14d3197914 |
crypto: powerpc/poly1305 - Add block-only interface
Add block-only interface. Also remove the unnecessary SIMD fallback path. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Herbert Xu
|
fba4aafaba |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux v6.15-rc5
Merge mainline to pick up bcachefs poly1305 patch
|
||
|
Athira Rajeev
|
143a258462 |
powerpc/pseries/htmdump: Add htm capabilities support to htmdump module
Support dumping HTM capabilities information from Hardware Trace Macro (HTM) function via debugfs interface. Under debugfs folder "/sys/kernel/debug/powerpc/htmdump", add file "htmcaps". The interface allows only read of this file which will present the content of HTM buffer from the hcall. Signed-off-by: Athira Rajeev <atrajeev@linux.ibm.com> Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250420180844.53128-9-atrajeev@linux.ibm.com |
||
|
Athira Rajeev
|
d3f24bf27b |
powerpc/pseries/htmdump: Add htm flags support to htmdump module
Under debugfs folder, "/sys/kernel/debug/powerpc/htmdump", add file "htmflags". Currently supported flag value is to enable/disable HTM buffer wrap. wrap is used along with "configure" to prevent HTM buffer from wrapping. Writing 1 will set noWrap while configuring HTM Signed-off-by: Athira Rajeev <atrajeev@linux.ibm.com> Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250420180844.53128-8-atrajeev@linux.ibm.com |
||
|
Athira Rajeev
|
78fb17ac68 |
powerpc/pseries/htmdump: Add htm setup support to htmdump module
Add htm setup support to htmdump module. To use the HTM (Hardware Trace Macro), HTM buffer has to be allocated. Support setup of HTM buffers via debugfs interface. Under debugfs folder, "/sys/kernel/debug/powerpc/htmdump", add file "htmsetup". The interface allows setup of HTM buffer by writing size of HTM buffer in power of 2 to the "htmsetup" file Signed-off-by: Athira Rajeev <atrajeev@linux.ibm.com> Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250420180844.53128-7-atrajeev@linux.ibm.com |
||
|
Athira Rajeev
|
dea7384e14 |
powerpc/pseries/htmdump: Add htm info support to htmdump module
Support dumping system processor configuration from Hardware Trace Macro (HTM) function via debugfs interface. Under debugfs folder "/sys/kernel/debug/powerpc/htmdump", add file "htminfo". The interface allows only read of this file which will present the content of HTM buffer from the hcall. The 16th offset of HTM buffer has value for the number of entries for array of processors. Use this information to copy data to the debugfs file Signed-off-by: Athira Rajeev <atrajeev@linux.ibm.com> Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250420180844.53128-6-atrajeev@linux.ibm.com |
||
|
Athira Rajeev
|
627cf584f4 |
powerpc/pseries/htmdump: Add htm status support to htmdump module
Support dumping status of Hardware Trace Macro (HTM) function via debugfs interface. Under debugfs folder "/sys/kernel/debug/powerpc/htmdump", add file "htmstatus". The interface allows only read of this file which will present the content of HTM status buffer from the hcall. The 16th offset of HTM status buffer has value for the number of HTM entries in the status buffer. Each nest htm status entry is 0x6 bytes, where as core HTM status entry is 0x8 bytes. Calculate the number of bytes to read based on this detail. Signed-off-by: Athira Rajeev <atrajeev@linux.ibm.com> Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250420180844.53128-5-atrajeev@linux.ibm.com |
||
|
Athira Rajeev
|
e03e4b12de |
powerpc/pseries/htmdump: Add htm start support to htmdump module
Support starting of Hardware Trace Macro (HTM) function via debugfs interface. Under debugfs folder "/sys/kernel/debug/powerpc/htmdump", add file "htmstart". The interface allows starting of htm via this file by writing value "1". Also allows stopping of htm tracing by writing value "0" to this file. Any other value returns -EINVAL. Signed-off-by: Athira Rajeev <atrajeev@linux.ibm.com> Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250420180844.53128-4-atrajeev@linux.ibm.com |
||
|
Athira Rajeev
|
c6edd034e3 |
powerpc/pseries/htmdump: Add htm configure support to htmdump module
Support configuring of Hardware Trace Macro (HTM) function via debugfs interface. Under debugfs folder "/sys/kernel/debug/powerpc/htmdump", add file "htmconfigure". The interface allows configuring of htm via this file by writing value "1". Allow deconfiguring of htm via this file by writing value "0". Any other value returns -EINVAL. Signed-off-by: Athira Rajeev <atrajeev@linux.ibm.com> Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250420180844.53128-3-atrajeev@linux.ibm.com |
||
|
Athira Rajeev
|
6e204ef3b7 |
powerpc/pseries/htmdump: Add htm_hcall_wrapper to integrate other htm operations
H_HTM (Hardware Trace Macro) hypervisor call is an HCALL to export data from Hardware Trace Macro (HTM) function. The debugfs interface to export the HTM function data in an lpar currently supports only dumping of HTM data in an lpar. To add support for setup, configuration and control of HTM function via debugfs interface, update the hcall wrapper function. Rename and update htm_get_dump_hardware to htm_hcall_wrapper() so that it can be used for other HTM operations as well. Additionally include parameter "htm_op". Update htmdump module to check the return code of hcall in a separate function so that it can be reused for other option too. Add check to disable the interface in guest environment. Signed-off-by: Athira Rajeev <atrajeev@linux.ibm.com> Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250420180844.53128-2-atrajeev@linux.ibm.com |
||
|
Bartosz Golaszewski
|
5ea6a980b5 |
powerpc: 8xx/gpio: use new line value setter callbacks
struct gpio_chip now has callbacks for setting line values that return an integer, allowing to indicate failures. Convert the driver to using them. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Acked-by: Christophe Leroy <christophe.leroy@csgroup.eu> # powerpc 8xx Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250502-gpiochip-set-rv-powerpc-v2-5-488e43e325bf@linaro.org |
||
|
Bartosz Golaszewski
|
c8fb184faa |
powerpc: 52xx/gpio: use new line value setter callbacks
struct gpio_chip now has callbacks for setting line values that return an integer, allowing to indicate failures. Convert the driver to using them. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250502-gpiochip-set-rv-powerpc-v2-4-488e43e325bf@linaro.org |
||
|
Bartosz Golaszewski
|
5effda1c36 |
powerpc: 44x/gpio: use new line value setter callbacks
struct gpio_chip now has callbacks for setting line values that return an integer, allowing to indicate failures. Convert the driver to using them. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250502-gpiochip-set-rv-powerpc-v2-3-488e43e325bf@linaro.org |
||
|
Bartosz Golaszewski
|
077f873325 |
powerpc: 83xx/gpio: use new line value setter callbacks
struct gpio_chip now has callbacks for setting line values that return an integer, allowing to indicate failures. Convert the driver to using them. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250502-gpiochip-set-rv-powerpc-v2-2-488e43e325bf@linaro.org |
||
|
Bartosz Golaszewski
|
54ac723320 |
powerpc: sysdev/gpio: use new line value setter callbacks
struct gpio_chip now has callbacks for setting line values that return an integer, allowing to indicate failures. Convert the driver to using them. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250502-gpiochip-set-rv-powerpc-v2-1-488e43e325bf@linaro.org |
||
|
Haren Myneni
|
925e8620db |
powerpc/pseries: Include linux/types.h in papr-platform-dump.h
Fix the following build warning:
usr/include/asm/papr-platform-dump.h:12: found __[us]{8,16,32,64} type without #include <linux/types.h>
Fixes:
|
||
|
Jakub Kicinski
|
337079d31f |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR (net-6.15-rc5). No conflicts or adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Christophe Leroy
|
b2f64cf158 |
powerpc: Don't use --- in kernel logs
When a kernel log containing --- at the start of a line is copied into a patch message, 'git am' drops everything located after that ---. Replace --- by ---- to avoid that. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/54a1f8d2c3fb5b95434039724c8c141052ae5cc0.1739346038.git.christophe.leroy@csgroup.eu |
||
|
Eddie James
|
882b25af26 |
powerpc/crash: Fix non-smp kexec preparation
In non-smp configurations, crash_kexec_prepare is never called in
the crash shutdown path. One result of this is that the crashing_cpu
variable is never set, preventing crash_save_cpu from storing the
NT_PRSTATUS elf note in the core dump.
Fixes:
|
||
|
Jiri Slaby (SUSE)
|
497b7794ae |
powerpc: do not build ppc_save_regs.o always
The Fixes commit below tried to add CONFIG_PPC_BOOK3S to one of the
conditions to enable the build of ppc_save_regs.o. But it failed to do
so, in fact. The commit omitted to add a dollar sign.
Therefore, ppc_save_regs.o is built always these days (as
"(CONFIG_PPC_BOOK3S)" is never an empty string).
Fix this by adding the missing dollar sign.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Fixes:
|
||
|
Gautam Menghani
|
9cc0eafd28 |
powerpc/pseries/msi: Avoid reading PCI device registers in reduced power states
When a system is being suspended to RAM, the PCI devices are also
suspended and the PPC code ends up calling pseries_msi_compose_msg() and
this triggers the BUG_ON() in __pci_read_msi_msg() because the device at
this point is in reduced power state. In reduced power state, the memory
mapped registers of the PCI device are not accessible.
To replicate the bug:
1. Make sure deep sleep is selected
# cat /sys/power/mem_sleep
s2idle [deep]
2. Make sure console is not suspended (so that dmesg logs are visible)
echo N > /sys/module/printk/parameters/console_suspend
3. Suspend the system
echo mem > /sys/power/state
To fix this behaviour, read the cached msi message of the device when the
device is not in PCI_D0 power state instead of touching the hardware.
Fixes:
|
||
|
Hari Bathini
|
59ba025948 |
powerpc/bpf: fix JIT code size calculation of bpf trampoline
arch_bpf_trampoline_size() provides JIT size of the BPF trampoline
before the buffer for JIT'ing it is allocated. The total number of
instructions emitted for BPF trampoline JIT code depends on where
the final image is located. So, the size arrived at with the dummy
pass in arch_bpf_trampoline_size() can vary from the actual size
needed in arch_prepare_bpf_trampoline(). When the instructions
accounted in arch_bpf_trampoline_size() is less than the number of
instructions emitted during the actual JIT compile of the trampoline,
the below warning is produced:
WARNING: CPU: 8 PID: 204190 at arch/powerpc/net/bpf_jit_comp.c:981 __arch_prepare_bpf_trampoline.isra.0+0xd2c/0xdcc
which is:
/* Make sure the trampoline generation logic doesn't overflow */
if (image && WARN_ON_ONCE(&image[ctx->idx] >
(u32 *)rw_image_end - BPF_INSN_SAFETY)) {
So, during the dummy pass, instead of providing some arbitrary image
location, account for maximum possible instructions if and when there
is a dependency with image location for JIT'ing.
Fixes:
|
||
|
Hari Bathini
|
cb5b691f82 |
powerpc64/ftrace: fix clobbered r15 during livepatching
While r15 is clobbered always with PPC_FTRACE_OUT_OF_LINE, it is
not restored in livepatch sequence leading to not so obvious fails
like below:
BUG: Unable to handle kernel data access on write at 0xc0000000000f9078
Faulting instruction address: 0xc0000000018ff958
Oops: Kernel access of bad area, sig: 11 [#1]
...
NIP: c0000000018ff958 LR: c0000000018ff930 CTR: c0000000009c0790
REGS: c00000005f2e7790 TRAP: 0300 Tainted: G K (6.14.0+)
MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 2822880b XER: 20040000
CFAR: c0000000008addc0 DAR: c0000000000f9078 DSISR: 0a000000 IRQMASK: 1
GPR00: c0000000018f2584 c00000005f2e7a30 c00000000280a900 c000000017ffa488
GPR04: 0000000000000008 0000000000000000 c0000000018f24fc 000000000000000d
GPR08: fffffffffffe0000 000000000000000d 0000000000000000 0000000000008000
GPR12: c0000000009c0790 c000000017ffa480 c00000005f2e7c78 c0000000000f9070
GPR16: c00000005f2e7c90 0000000000000000 0000000000000000 0000000000000000
GPR20: 0000000000000000 c00000005f3efa80 c00000005f2e7c60 c00000005f2e7c88
GPR24: c00000005f2e7c60 0000000000000001 c0000000000f9078 0000000000000000
GPR28: 00007fff97960000 c000000017ffa480 0000000000000000 c0000000000f9078
...
Call Trace:
check_heap_object+0x34/0x390 (unreliable)
__mutex_unlock_slowpath.isra.0+0xe4/0x230
seq_read_iter+0x430/0xa90
proc_reg_read_iter+0xa4/0x200
vfs_read+0x41c/0x510
ksys_read+0xa4/0x190
system_call_exception+0x1d0/0x440
system_call_vectored_common+0x15c/0x2ec
Fix it by restoring r15 always.
Fixes:
|
||
|
Eric Biggers
|
b4fa54d654 |
powerpc/crc: rename crc32-vpmsum_core.S to crc-vpmsum-template.S
Rename crc32-vpmsum_core.S to crc-vpmsum-template.S to properly convey that (a) it actually generates code for both 32-bit and 16-bit CRCs, not just 32-bit CRCs; and (b) it has "template" semantics, like x86's crc-pclmul-template.S, in the sense that it's included by other files. Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20250424002038.179114-5-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> |
||
|
Eric Biggers
|
436490e868 |
powerpc/crc: drop "glue" from filenames
The use of the term "glue" in filenames is a Crypto API-ism that rarely shows up elsewhere in lib/ or arch/*/lib/. I think adopting it there was a mistake. The library just uses standard functions, so the amount of code that could be considered "glue" is quite small. And while often the C functions just wrap the assembly functions, there are also cases like crc32c_arch() in arch/x86/lib/crc32-glue.c that blur the line by in-lining the actual implementation into the C function. That's not "glue code", but rather the actual code. Therefore, let's drop "glue" from the filenames and instead use e.g. crc32.c instead of crc32-glue.c. Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20250424002038.179114-4-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> |
||
|
Eric Biggers
|
7ef377c4d4 |
lib/crc: make the CPU feature static keys __ro_after_init
All of the CRC library's CPU feature static_keys are initialized by initcalls and never change afterwards, so there's no need for them to be in the regular .data section. Put them in .data..ro_after_init instead. Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Heiko Carstens <hca@linux.ibm.com> # s390 Link: https://lore.kernel.org/r/20250413154350.10819-1-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> |
||
|
Eric Biggers
|
af9ce62783 |
crypto: lib/poly1305 - remove INTERNAL symbol and selection of CRYPTO
Now that the architecture-optimized Poly1305 kconfig symbols are defined regardless of CRYPTO, there is no need for CRYPTO_LIB_POLY1305 to select CRYPTO. So, remove that. This makes the indirection through the CRYPTO_LIB_POLY1305_INTERNAL symbol unnecessary, so get rid of that and just use CRYPTO_LIB_POLY1305 directly. Finally, make the fallback to the generic implementation use a default value instead of a select; this makes it consistent with how the arch-optimized code gets enabled and also with how CRYPTO_LIB_BLAKE2S_GENERIC gets enabled. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Eric Biggers
|
879f47548b |
crypto: lib/chacha - remove INTERNAL symbol and selection of CRYPTO
Now that the architecture-optimized ChaCha kconfig symbols are defined regardless of CRYPTO, there is no need for CRYPTO_LIB_CHACHA to select CRYPTO. So, remove that. This makes the indirection through the CRYPTO_LIB_CHACHA_INTERNAL symbol unnecessary, so get rid of that and just use CRYPTO_LIB_CHACHA directly. Finally, make the fallback to the generic implementation use a default value instead of a select; this makes it consistent with how the arch-optimized code gets enabled and also with how CRYPTO_LIB_BLAKE2S_GENERIC gets enabled. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Eric Biggers
|
f9f86c03ef |
crypto: powerpc - move library functions to arch/powerpc/lib/crypto/
Continue disentangling the crypto library functions from the generic crypto infrastructure by moving the powerpc ChaCha and Poly1305 library functions into a new directory arch/powerpc/lib/crypto/ that does not depend on CRYPTO. This mirrors the distinction between crypto/ and lib/crypto/. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Eric Biggers
|
d58a46df96 |
crypto: powerpc - drop redundant dependencies on PPC
arch/powerpc/crypto/Kconfig is sourced only when CONFIG_PPC=y, so there is no need for the symbols defined inside it to depend on PPC. Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Madhavan Srinivasan
|
e3f506b78d |
powerpc/boot: Fix dash warning
'commit |
||
|
Herbert Xu
|
9cd9c99be1 |
crypto: powerpc/sha256-spe - Use API partial block handling
Use the Crypto API partial block handling. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Herbert Xu
|
52c7878306 |
crypto: powerpc/sha1-spe - Use API partial block handling
Use the Crypto API partial block handling. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Herbert Xu
|
c0f07da681 |
crypto: powerpc/sha1 - Use API partial block handling
Use the Crypto API partial block handling. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Herbert Xu
|
60fded5709 |
crypto: powerpc/md5 - Use API partial block handling
Use the Crypto API partial block handling. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Herbert Xu
|
f5bd7e84ac |
crypto: powerpc/ghash - Use API partial block handling
Use the Crypto API partial block handling. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Eric Biggers
|
bb9c648b33 |
crypto: lib/poly1305 - restore ability to remove modules
Though the module_exit functions are now no-ops, they should still be defined, since otherwise the modules become unremovable. Fixes: |
||
|
Eric Biggers
|
8821d26926 |
crypto: lib/chacha - restore ability to remove modules
Though the module_exit functions are now no-ops, they should still be defined, since otherwise the modules become unremovable. Fixes: |
||
|
Ingo Molnar
|
1d34a05433 |
Merge branch 'perf/urgent' into perf/core, to pick up fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Haren Myneni
|
86900ab620 |
powerpc/pseries: Add a char driver for physical-attestation RTAS
The RTAS call ibm,physical-attestation is used to retrieve
information about the trusted boot state of the firmware and
hypervisor on the system, and also Trusted Platform Modules (TPM)
data if the system is TCG 2.0 compliant.
This RTAS interface expects the caller to define different command
structs such as RetrieveTPMLog, RetrievePlatformCertificat and etc,
in a work area with a maximum size of 4K bytes and the response
buffer will be returned in the same work area.
The current implementation of this RTAS function is in the user
space but allocation of the work area is restricted with the system
lockdown. So this patch implements this RTAS function in the kernel
and expose to the user space with open/ioctl/read interfaces.
PAPR (2.13+ 21.3 ibm,physical-attestation) defines RTAS function:
- Pass the command struct to obtain the response buffer for the
specific command.
- This RTAS function is sequence RTAS call and has to issue RTAS
call multiple times to get the complete response buffer (max 64K).
The hypervisor expects the first RTAS call with the sequence 1 and
the subsequent calls with the sequence number returned from the
previous calls.
Expose these interfaces to user space with a
/dev/papr-physical-attestation character device using the following
programming model:
int devfd = open("/dev/papr-physical-attestation");
int fd = ioctl(devfd, PAPR_PHY_ATTEST_IOC_HANDLE,
struct papr_phy_attest_io_block);
- The user space defines the command struct and requests the
response for any command.
- Obtain the complete response buffer and returned the buffer as
blob to the command specific FD.
size = read(fd, buf, len);
- Can retrieve the response buffer once or multiple times until the
end of BLOB buffer.
Implemented this new kernel ABI support in librtas library for
system lockdown
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250416225743.596462-8-haren@linux.ibm.com
|
||
|
Haren Myneni
|
8aa9efc0be |
powerpc/pseries: Add papr-platform-dump character driver for dump retrieval
ibm,platform-dump RTAS call in combination with writable mapping
/dev/mem is issued to collect platform dump from the hypervisor
and may need multiple calls to get the complete dump. The current
implementation uses rtas_platform_dump() API provided by librtas
library to issue these RTAS calls. But /dev/mem access by the
user space is prohibited under system lockdown.
The solution should be to restrict access to RTAS function in user
space and provide kernel interfaces to collect dump. This patch
adds papr-platform-dump character driver and expose standard
interfaces such as open / ioctl/ read to user space in ways that
are compatible with lockdown.
PAPR (7.3.3.4.1 ibm,platform-dump) provides a method to obtain
the complete dump:
- Each dump will be identified by ID called dump tag.
- A sequence of RTAS calls have to be issued until retrieve the
complete dump. The hypervisor expects the first RTAS call with
the sequence 0 and the subsequent calls with the sequence
number returned from the previous calls.
- The hypervisor returns "dump complete" status once the complete
dump is retrieved. But expects one more RTAS call from the
partition with the NULL buffer to invalidate dump which means
the dump will be removed in the hypervisor.
- Sequence of calls are allowed with different dump IDs at the
same time but not with the same dump ID.
Expose these interfaces to user space with a /dev/papr-platform-dump
character device using the following programming model:
int devfd = open("/dev/papr-platform-dump", O_RDONLY);
int fd = ioctl(devfd,PAPR_PLATFORM_DUMP_IOC_CREATE_HANDLE, &dump_id)
- Restrict user space to access with the same dump ID.
Typically we do not expect user space requests the dump
again for the same dump ID.
char *buf = malloc(size);
length = read(fd, buf, size);
- size should be minimum 1K based on PAPR and <= 4K based
on RTAS work area size. It will be restrict to RTAS work
area size. Using 4K work area based on the current
implementation in librtas library
- Each read call issue RTAS call to get the data based on
the size requirement and returns bytes returned from the
hypervisor
- If the previous call returns dump complete status, the
next read returns 0 like EOF.
ret = ioctl(PAPR_PLATFORM_DUMP_IOC_INVALIDATE, &dump_id)
- RTAS call with NULL buffer to invalidates the dump.
The read API should use the file descriptor obtained from ioctl
based on dump ID so that gets dump contents for the corresponding
dump ID. Implemented support in librtas (rtas_platform_dump()) for
this new ABI to support system lockdown.
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Tested-by: Sathvika Vasireddy <sv@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250416225743.596462-7-haren@linux.ibm.com
|
||
|
Haren Myneni
|
496c7524dc |
powerpc/pseries: Add ibm,get-dynamic-sensor-state RTAS call support
The RTAS call ibm,get-dynamic-sensor-state is used to get the
sensor state identified by the location code and the sensor
token. The librtas library provides an API
rtas_get_dynamic_sensor() which uses /dev/mem access for work
area allocation but is restricted under system lockdown.
This patch provides an interface with new ioctl
PAPR_DYNAMIC_SENSOR_IOC_GET to the papr-indices character
driver which executes this HCALL and copies the sensor state
in the user specified ioctl buffer.
Refer PAPR 7.3.19 ibm,get-dynamic-sensor-state for more
information on this RTAS call.
- User input parameters to the RTAS call: location code string
and the sensor token
Expose these interfaces to user space with a /dev/papr-indices
character device using the following programming model:
int fd = open("/dev/papr-indices", O_RDWR);
int ret = ioctl(fd, PAPR_DYNAMIC_SENSOR_IOC_GET,
struct papr_indices_io_block)
- The user space specifies input parameters in
papr_indices_io_block struct
- Returned state for the specified sensor is copied to
papr_indices_io_block.dynamic_param.state
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Tested-by: Sathvika Vasireddy <sv@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250416225743.596462-6-haren@linux.ibm.com
|
||
|
Haren Myneni
|
f60a3796f8 |
powerpc/pseries: Add ibm,set-dynamic-indicator RTAS call support
The RTAS call ibm,set-dynamic-indicator is used to set the new
indicator state identified by a location code. The current
implementation uses rtas_set_dynamic_indicator() API provided by
librtas library which allocates RMO buffer and issue this RTAS
call in the user space. But /dev/mem access by the user space
is prohibited under system lockdown.
This patch provides an interface with new ioctl
PAPR_DYNAMIC_INDICATOR_IOC_SET to the papr-indices character
driver and expose this interface to the user space that is
compatible with lockdown.
Refer PAPR 7.3.18 ibm,set-dynamic-indicator for more
information on this RTAS call.
- User input parameters to the RTAS call: location code
string, indicator token and new state
Expose these interfaces to user space with a /dev/papr-indices
character device using the following programming model:
int fd = open("/dev/papr-indices", O_RDWR);
int ret = ioctl(fd, PAPR_DYNAMIC_INDICATOR_IOC_SET,
struct papr_indices_io_block)
- The user space passes input parameters in papr_indices_io_block
struct
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Tested-by: Sathvika Vasireddy <sv@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250416225743.596462-5-haren@linux.ibm.com
|
||
|
Haren Myneni
|
6e9aec5446 |
powerpc/pseries: Add papr-indices char driver for ibm,get-indices
The RTAS call ibm,get-indices is used to obtain indices and
location codes for a specified indicator or sensor token. The
current implementation uses rtas_get_indices() API provided by
librtas library which allocates RMO buffer and issue this RTAS
call in the user space. But writable mapping /dev/mem access by
the user space is prohibited under system lockdown.
To overcome the restricted access in the user space, the kernel
provide interfaces to collect indices data from the hypervisor.
This patch adds papr-indices character driver and expose standard
interfaces such as open / ioctl/ read to user space in ways that
are compatible with lockdown.
PAPR (2.13 7.3.17 ibm,get-indices RTAS Call) describes the
following steps to retrieve all indices data:
- User input parameters to the RTAS call: sensor or indicator,
and indice type
- ibm,get-indices is sequence RTAS call which means has to issue
multiple times to get the entire list of indicators or sensors
of a particular type. The hypervisor expects the first RTAS call
with the sequence 1 and the subsequent calls with the sequence
number returned from the previous calls.
- The OS may not interleave calls to ibm,get-indices for different
indicator or sensor types. Means other RTAS calls with different
type should not be issued while the previous type sequence is in
progress. So collect the entire list of indices and copied to
buffer BLOB during ioctl() and expose this buffer to the user
space with the file descriptor.
- The hypervisor fills the work area with a specific format but
does not return the number of bytes written to the buffer.
Instead of parsing the data for each call to determine the data
length, copy the work area size (RTAS_GET_INDICES_BUF_SIZE) to
the buffer. Return work-area size of data to the user space for
each read() call.
Expose these interfaces to user space with a /dev/papr-indices
character device using the following programming model:
int devfd = open("/dev/papr-indices", O_RDONLY);
int fd = ioctl(devfd, PAPR_INDICES_IOC_GET,
struct papr_indices_io_block)
- Collect all indices data for the specified token to the buffer
char *buf = malloc(RTAS_GET_INDICES_BUF_SIZE);
length = read(fd, buf, RTAS_GET_INDICES_BUF_SIZE)
- RTAS_GET_INDICES_BUF_SIZE of data is returned to the user
space.
- The user space retrieves the indices and their location codes
from the buffer
- Should issue multiple read() calls until reaches the end of
BLOB buffer.
The read() should use the file descriptor obtained from ioctl to
get the data that is exposed to file descriptor. Implemented
support in librtas (rtas_get_indices()) for this new ABI for
system lockdown.
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Tested-by: Sathvika Vasireddy <sv@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250416225743.596462-4-haren@linux.ibm.com
|
||
|
Haren Myneni
|
43d869ac25 |
powerpc/pseries: Define papr_indices_io_block for papr-indices ioctls
To issue ibm,get-indices, ibm,set-dynamic-indicator and ibm,get-dynamic-sensor-state in the user space, the RMO buffer is allocated for the work area which is restricted under system lockdown. So instead of user space execution, the kernel will provide /dev/papr-indices interface to execute these RTAS calls. The user space assigns data in papr_indices_io_block struct depends on the specific HCALL and passes to the following ioctls: PAPR_INDICES_IOC_GET: Use for ibm,get-indices. Returns a get-indices handle fd to read data. PAPR_DYNAMIC_SENSOR_IOC_GET: Use for ibm,get-dynamic-sensor-state. Updates the sensor state in papr_indices_io_block.dynamic_param.state PAPR_DYNAMIC_INDICATOR_IOC_SET: Use for ibm,set-dynamic-indicator. Sets the new state for the input indicator. Signed-off-by: Haren Myneni <haren@linux.ibm.com> Tested-by: Sathvika Vasireddy <sv@linux.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250416225743.596462-3-haren@linux.ibm.com |
||
|
Haren Myneni
|
ecc45d4f8c |
powerpc/pseries: Define common functions for RTAS sequence calls
The RTAS call can be normal where retrieves the data form the
hypervisor once or sequence based RTAS call which has to
issue multiple times until the complete data is obtained. For
some of these sequence RTAS calls, the OS should not interleave
calls with different input until the sequence is completed.
The data is collected for each call and copy to the buffer
for the entire sequence during ioctl() handle and then expose
this buffer to the user space with read() handle.
One such sequence RTAS call is ibm,get-vpd and its support is
already included in the current code. To add the similar support
for other sequence based calls, move the common functions in to
separate file and update papr_rtas_sequence struct with the
following callbacks so that RTAS call specific code will be
defined and executed to complete the sequence.
struct papr_rtas_sequence {
int error;
void params;
void (*begin) (struct papr_rtas_sequence *);
void (*end) (struct papr_rtas_sequence *);
const char * (*work) (struct papr_rtas_sequence *, size_t *);
};
params: Input parameters used to pass for RTAS call.
Begin: RTAS call specific function to initialize data
including work area allocation.
End: RTAS call specific function to free up resources
(free work area) after the sequence is completed.
Work: The actual RTAS call specific function which collects
the data from the hypervisor.
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Tested-by: Sathvika Vasireddy <sv@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250416225743.596462-2-haren@linux.ibm.com
|
||
|
Herbert Xu
|
da4cb617bc |
powerpc/crc: Include uaccess.h and others
The powerpc crc code was relying on pagefault_disable from being
pulled in by random header files.
Fix this by explicitly including uaccess.h. Also add other missing
header files to prevent similar problems in future.
Reported-by: Eric Biggers <ebiggers@kernel.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes:
|
||
|
Shrikanth Hegde
|
6ad7751537 |
powerpc: enable dynamic preemption
Once the lazy preemption is supported, it would be desirable to change
the preemption models at runtime. So add support for dynamic preemption
using DYNAMIC_KEY.
::Tested lightly on Power10 LPAR
Performance numbers indicate that, preempt=none(no dynamic) and
preempt=none(dynamic) are close.
cat /sys/kernel/debug/sched/preempt
(none) voluntary full lazy
perf stat -e probe:__cond_resched -a sleep 1
Performance counter stats for 'system wide':
1,253 probe:__cond_resched
echo full > /sys/kernel/debug/sched/preempt
cat /sys/kernel/debug/sched/preempt
none voluntary (full) lazy
perf stat -e probe:__cond_resched -a sleep 1
Performance counter stats for 'system wide':
0 probe:__cond_resched
Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250210184334.567383-2-sshegde@linux.ibm.com
|
||
|
Thorsten Blum
|
28affd477b |
fadump: Use str_yes_no() helper in fadump_show_config()
Remove hard-coded strings by using the str_yes_no() helper function. Reviewed-by: Sourabh Jain <sourabhjain@linux.ibm.com> Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com> Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250209081704.2758-2-thorsten.blum@linux.dev |
||
|
Thorsten Blum
|
1518474b70 |
KVM: powerpc: Enable commented out BUILD_BUG_ON() assertion
The BUILD_BUG_ON() assertion was commented out in commit |
||
|
Thorsten Blum
|
0f725e9851 |
powerpc: mpic: Use str_enabled_disabled() helper function
Remove hard-coded strings by using the str_enabled_disabled() helper function. Use pr_debug() instead of printk(KERN_DEBUG) to silence a checkpatch warning. Reviewed-by: Ricardo B. Marlière <ricardo@marliere.net> Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250219112053.3352-2-thorsten.blum@linux.dev |
||
|
Thorsten Blum
|
f69898bce2 |
powerpc/ps3: Use str_write_read() in ps3_notification_read_write()
Remove hard-coded strings by using the str_write_read() helper function. Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250219111445.2875-2-thorsten.blum@linux.dev |
||
|
Vaibhav Jain
|
02a1324b08 |
powerpc/kvm-hv-pmu: Add perf-events for Hostwide counters
Update 'kvm-hv-pmu.c' to add five new perf-events mapped to the five
Hostwide counters. Since these newly introduced perf events are at system
wide scope and can be read from any L1-Lpar CPU, 'kvmppc_pmu' scope and
capabilities are updated appropriately.
Also introduce two new helpers. First is kvmppc_update_l0_stats() that uses
the infrastructure introduced in previous patches to issues the
H_GUEST_GET_STATE hcall L0-PowerVM to fetch guest-state-buffer holding the
latest values of these counters which is then parsed and 'l0_stats'
variable updated.
Second helper is kvmppc_pmu_event_update() which is called from
'kvmppv_pmu' callbacks and uses kvmppc_update_l0_stats() to update
'l0_stats' and the update the 'struct perf_event's event-counter.
Some minor updates to kvmppc_pmu_{add, del, read}() to remove some debug
scaffolding code.
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Reviewed-by: Athira Rajeev <atrajeev@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250416162740.93143-7-vaibhav@linux.ibm.com
|
||
|
Vaibhav Jain
|
f0c9c49c50 |
powerpc/kvm-hv-pmu: Implement GSB message-ops for hostwide counters
Implement and setup necessary structures to send a prepolulated Guest-State-Buffer(GSB) requesting hostwide counters to L0-PowerVM and have the returned GSB holding the values of these counters parsed. This is done via existing GSB implementation and with the newly added support of Hostwide elements in GSB. The request to L0-PowerVM to return Hostwide counters is done using a pre-allocated GSB named 'gsb_l0_stats'. To be able to populate this GSB with the needed Guest-State-Elements (GSIDs) a instance of 'struct kvmppc_gs_msg' named 'gsm_l0_stats' is introduced. The 'gsm_l0_stats' is tied to an instance of 'struct kvmppc_gs_msg_ops' named 'gsb_ops_l0_stats' which holds various callbacks to be compute the size ( hostwide_get_size() ), populate the GSB ( hostwide_fill_info() ) and refresh ( hostwide_refresh_info() ) the contents of 'l0_stats' that holds the Hostwide counters returned from L0-PowerVM. To protect these structures from simultaneous access a spinlock 'lock_l0_stats' has been introduced. The allocation and initialization of the above structures is done in newly introduced kvmppc_init_hostwide() and similarly the cleanup is performed in newly introduced kvmppc_cleanup_hostwide(). Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250416162740.93143-6-vaibhav@linux.ibm.com |
||
|
Vaibhav Jain
|
ff45bf50cc |
kvm powerpc/book3s-apiv2: Introduce kvm-hv specific PMU
Introduce a new PMU named 'kvm-hv' inside a new module named 'kvm-hv-pmu' to report Book3s kvm-hv specific performance counters. This will expose KVM-HV specific performance attributes to user-space via kernel's PMU infrastructure and would enableusers to monitor active kvm-hv based guests. The patch creates necessary scaffolding to for the new PMU callbacks and introduces the new kernel module name 'kvm-hv-pmu' which is built with CONFIG_KVM_BOOK3S_HV_PMU. The patch doesn't introduce any perf-events yet, which will be introduced in later patches Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250416162740.93143-5-vaibhav@linux.ibm.com |
||
|
Vaibhav Jain
|
1f35ad2b93 |
kvm powerpc/book3s-apiv2: Add kunit tests for Hostwide GSB elements
Update 'test-guest-state-buffer.c' to add two new KUNIT test cases for
validating correctness of changes to Guest-state-buffer management
infrastructure for adding support for Hostwide GSB elements.
The newly introduced test test_gs_hostwide_msg() checks if the Hostwide
elements can be set and parsed from a Guest-state-buffer. The second kunit
test test_gs_hostwide_counters() checks if the Hostwide GSB elements can be
send to the L0-PowerVM hypervisor via the H_GUEST_SET_STATE hcall and
ensures that the returned guest-state-buffer has all the 5 Hostwide stat
counters present.
Below is the KATP test report with the newly added KUNIT tests:
KTAP version 1
# Subtest: guest_state_buffer_test
# module: test_guest_state_buffer
1..7
ok 1 test_creating_buffer
ok 2 test_adding_element
ok 3 test_gs_bitmap
ok 4 test_gs_parsing
ok 5 test_gs_msg
ok 6 test_gs_hostwide_msg
# test_gs_hostwide_counters: Guest Heap Size=0 bytes
# test_gs_hostwide_counters: Guest Heap Size Max=10995367936 bytes
# test_gs_hostwide_counters: Guest Page-table Size=2178304 bytes
# test_gs_hostwide_counters: Guest Page-table Size Max=2147483648 bytes
# test_gs_hostwide_counters: Guest Page-table Reclaim Size=0 bytes
ok 7 test_gs_hostwide_counters
# guest_state_buffer_test: pass:7 fail:0 skip:0 total:7
# Totals: pass:7 fail:0 skip:0 total:7
ok 1 guest_state_buffer_test
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250416162740.93143-4-vaibhav@linux.ibm.com
|
||
|
Vaibhav Jain
|
5317f75fdc |
kvm powerpc/book3s-apiv2: Add support for Hostwide GSB elements
Add support for adding and parsing Hostwide elements to the
Guest-state-buffer data structure used in apiv2. These elements are used to
share meta-information pertaining to entire L1-Lpar and this
meta-information is maintained by L0-PowerVM hypervisor. Example of this
include the amount of the page-table memory currently used by L0-PowerVM
for hosting the Shadow-Pagetable of all active L2-Guests. More of the are
documented in kernel-documentation at [1]. The Hostwide GSB elements are
currently only support with H_GUEST_SET_STATE hcall with a special flag
namely 'KVMPPC_GS_FLAGS_HOST_WIDE'.
The patch introduces new defs for the 5 new Hostwide GSB elements including
their GSIDs as well as introduces a new class of GSB elements namely
'KVMPPC_GS_CLASS_HOSTWIDE' to indicate to GSB construction/parsing
infrastructure in 'kvm/guest-state-buffer.c'. Also
gs_msg_ops_vcpu_get_size(), kvmppc_gsid_type() and
kvmppc_gse_{flatten,unflatten}_iden() are updated to appropriately indicate
the needed size for these Hostwide GSB elements as well as how to
flatten/unflatten their GSIDs so that they can be marked as available in
GSB bitmap.
[1] Documention/arch/powerpc/kvm-nested.rst
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250416162740.93143-3-vaibhav@linux.ibm.com
|
||
|
Madhavan Srinivasan
|
b2accfe7ca |
powerpc/boot: Check for ld-option support
Commit |
||
|
Eric Biggers
|
ecaa4be128 |
crypto: poly1305 - centralize the shash wrappers for arch code
Following the example of the crc32, crc32c, and chacha code, make the crypto subsystem register both generic and architecture-optimized poly1305 shash algorithms, both implemented on top of the appropriate library functions. This eliminates the need for every architecture to implement the same shash glue code. Note that the poly1305 shash requires that the key be prepended to the data, which differs from the library functions where the key is simply a parameter to poly1305_init(). Previously this was handled at a fairly low level, polluting the library code with shash-specific code. Reorganize things so that the shash code handles this quirk itself. Also, to register the architecture-optimized shashes only when architecture-optimized code is actually being used, add a function poly1305_is_arch_optimized() and make each arch implement it. Change each architecture's Poly1305 module_init function to arch_initcall so that the CPU feature detection is guaranteed to run before poly1305_is_arch_optimized() gets called by crypto/poly1305.c. (In cases where poly1305_is_arch_optimized() just returns true unconditionally, using arch_initcall is not strictly needed, but it's still good to be consistent across architectures.) Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Eric Biggers
|
378a337ab4 |
crypto: powerpc/poly1305 - implement library instead of shash
Currently the Power10 optimized Poly1305 is only wired up to the crypto_shash API, which makes it unavailable to users of the library API. The crypto_shash API for Poly1305 is going to change to be implemented on top of the library API, so the library API needs to be supported. And of course it's needed anyway to serve the library users. Therefore, change the Power10 optimized Poly1305 code to implement the library API instead of the crypto_shash API. Cc: Danny Tsen <dtsen@linux.ibm.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Herbert Xu
|
9b27a1b200 |
crypto: powerpc - Include uaccess.h and others
The powerpc aes/ghash code was relying on pagefault_disable from being pulled in by random header files. Fix this by explicitly including uaccess.h. Also add other missing header files to prevent similar problems in future. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Madhavan Srinivasan
|
3700976f2a |
powerpc: Add check to select PPC_RADIX_BROADCAST_TLBIE
Commit
|
||
|
Anthony Iliopoulos
|
534f5a8ba2 |
powerpc64/ftrace: fix module loading without patchable function entries
get_stubs_size assumes that there must always be at least one patchable
function entry, which is not always the case (modules that export data
but no code), otherwise it returns -ENOEXEC and thus the section header
sh_size is set to that value. During module_memory_alloc() the size is
passed to execmem_alloc() after being page-aligned and thus set to zero
which will cause it to fail the allocation (and thus module loading) as
__vmalloc_node_range() checks for zero-sized allocs and returns null:
[ 115.466896] module_64: cast_common: doesn't contain __patchable_function_entries.
[ 115.469189] ------------[ cut here ]------------
[ 115.469496] WARNING: CPU: 0 PID: 274 at mm/vmalloc.c:3778 __vmalloc_node_range_noprof+0x8b4/0x8f0
...
[ 115.478574] ---[ end trace 0000000000000000 ]---
[ 115.479545] execmem: unable to allocate memory
Fix this by removing the check completely, since it is anyway not
helpful to propagate this as an error upwards.
Fixes:
|
||
|
Donet Tom
|
9cf7e13fec |
book3s64/radix : Align section vmemmap start address to PAGE_SIZE
A vmemmap altmap is a device-provided region used to provide
backing storage for struct pages. For each namespace, the altmap
should belong to that same namespace. If the namespaces are
created unaligned, there is a chance that the section vmemmap
start address could also be unaligned. If the section vmemmap
start address is unaligned, the altmap page allocated from the
current namespace might be used by the previous namespace also.
During the free operation, since the altmap is shared between two
namespaces, the previous namespace may detect that the page does
not belong to its altmap and incorrectly assume that the page is a
normal page. It then attempts to free the normal page, which leads
to a kernel crash.
Kernel attempted to read user page (18) - exploit attempt? (uid: 0)
BUG: Kernel NULL pointer dereference on read at 0x00000018
Faulting instruction address: 0xc000000000530c7c
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries
CPU: 32 PID: 2104 Comm: ndctl Kdump: loaded Tainted: G W
NIP: c000000000530c7c LR: c000000000530e00 CTR: 0000000000007ffe
REGS: c000000015e57040 TRAP: 0300 Tainted: G W
MSR: 800000000280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 84482404
CFAR: c000000000530dfc DAR: 0000000000000018 DSISR: 40000000 IRQMASK: 0
GPR00: c000000000530e00 c000000015e572e0 c000000002c5cb00 c00c000101008040
GPR04: 0000000000000000 0000000000000007 0000000000000001 000000000000001f
GPR08: 0000000000000005 0000000000000000 0000000000000018 0000000000002000
GPR12: c0000000001d2fb0 c0000060de6b0080 0000000000000000 c0000060dbf90020
GPR16: c00c000101008000 0000000000000001 0000000000000000 c000000125b20f00
GPR20: 0000000000000001 0000000000000000 ffffffffffffffff c00c000101007fff
GPR24: 0000000000000001 0000000000000000 0000000000000000 0000000000000000
GPR28: 0000000004040201 0000000000000001 0000000000000000 c00c000101008040
NIP [c000000000530c7c] get_pfnblock_flags_mask+0x7c/0xd0
LR [c000000000530e00] free_unref_page_prepare+0x130/0x4f0
Call Trace:
free_unref_page+0x50/0x1e0
free_reserved_page+0x40/0x68
free_vmemmap_pages+0x98/0xe0
remove_pte_table+0x164/0x1e8
remove_pmd_table+0x204/0x2c8
remove_pud_table+0x1c4/0x288
remove_pagetable+0x1c8/0x310
vmemmap_free+0x24/0x50
section_deactivate+0x28c/0x2a0
__remove_pages+0x84/0x110
arch_remove_memory+0x38/0x60
memunmap_pages+0x18c/0x3d0
devm_action_release+0x30/0x50
release_nodes+0x68/0x140
devres_release_group+0x100/0x190
dax_pmem_compat_release+0x44/0x80 [dax_pmem_compat]
device_for_each_child+0x8c/0x100
[dax_pmem_compat_remove+0x2c/0x50 [dax_pmem_compat]
nvdimm_bus_remove+0x78/0x140 [libnvdimm]
device_remove+0x70/0xd0
Another issue is that if there is no altmap, a PMD-sized vmemmap
page will be allocated from RAM, regardless of the alignment of
the section start address. If the section start address is not
aligned to the PMD size, a VM_BUG_ON will be triggered when
setting the PMD-sized page to page table.
In this patch, we are aligning the section vmemmap start address
to PAGE_SIZE. After alignment, the start address will not be
part of the current namespace, and a normal page will be allocated
for the vmemmap mapping of the current section. For the remaining
sections, altmaps will be allocated. During the free operation,
the normal page will be correctly freed.
In the same way, a PMD_SIZE vmemmap page will be allocated only if
the section start address is PMD_SIZE-aligned; otherwise, it will
fall back to a PAGE-sized vmemmap allocation.
Without this patch
==================
NS1 start NS2 start
_________________________________________________________
| NS1 | NS2 |
---------------------------------------------------------
| Altmap| Altmap | .....|Altmap| Altmap | ...........
| NS1 | NS1 | | NS2 | NS2 |
In the above scenario, NS1 and NS2 are two namespaces. The vmemmap
for NS1 comes from Altmap NS1, which belongs to NS1, and the
vmemmap for NS2 comes from Altmap NS2, which belongs to NS2.
The vmemmap start for NS2 is not aligned, so Altmap NS2 is shared
by both NS1 and NS2. During the free operation in NS1, Altmap NS2
is not part of NS1's altmap, causing it to attempt to free an
invalid page.
With this patch
===============
NS1 start NS2 start
_________________________________________________________
| NS1 | NS2 |
---------------------------------------------------------
| Altmap| Altmap | .....| Normal | Altmap | Altmap |.......
| NS1 | NS1 | | Page | NS2 | NS2 |
If the vmemmap start for NS2 is not aligned then we are allocating
a normal page. NS1 and NS2 vmemmap will be freed correctly.
Fixes:
|
||
|
Ritesh Harjani (IBM)
|
29bdc1f1c1 |
book3s64/radix: Fix compile errors when CONFIG_ARCH_WANT_OPTIMIZE_DAX_VMEMMAP=n
Fix compile errors when CONFIG_ARCH_WANT_OPTIMIZE_DAX_VMEMMAP=n Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com> Signed-off-by: Donet Tom <donettom@linux.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/8231763344223c193e3452eab0ae8ea966aff466.1741609795.git.donettom@linux.ibm.com |
||
|
Kuniyuki Iwashima
|
2a63dd0edf |
net: Retire DCCP socket.
DCCP was orphaned in 2021 by commit |
||
|
Mark Barnett
|
1734d98fbc |
perf/arch: Record sample last_period before updating on the x86 and PowerPC platforms
This change alters the PowerPC and x86 driver implementations to record the last sample period before the event is updated for the next period. A common pattern in PMU driver implementations is to have a "*_event_set_period" function which takes care of updating the various period-related fields in a perf_event structure. In most cases, the drivers choose to call this function after initializing a sample data structure with perf_sample_data_init. The x86 and PowerPC drivers deviate from this, choosing to update the period before initializing the sample data. When using an event with an alternate sample period, this causes an incorrect period to be written to the sample data that gets reported to userspace. Signed-off-by: Mark Barnett <mark.barnett@arm.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20250408171530.140858-2-mark.barnett@arm.com |
||
|
Linus Torvalds
|
97c484ccb8 |
CRC cleanups for 6.15
Finish cleaning up the CRC kconfig options by removing the remaining unnecessary prompts and an unnecessary 'default y', removing CONFIG_LIBCRC32C, and documenting all the CRC library options. -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCZ/P7QhQcZWJpZ2dlcnNA Z29vZ2xlLmNvbQAKCRDzXCl4vpKOKyoOAQCynFcS1dWuD27S+SdUREmBjMAoZo5M zdsIvlPv9KLycgD/QX5lXjW3KIYY6jQ8vHUuLVwfDl/JEp4GJS9dLGU+agg= =0R1T -----END PGP SIGNATURE----- Merge tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux Pull CRC cleanups from Eric Biggers: "Finish cleaning up the CRC kconfig options by removing the remaining unnecessary prompts and an unnecessary 'default y', removing CONFIG_LIBCRC32C, and documenting all the CRC library options" * tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: lib/crc: remove CONFIG_LIBCRC32C lib/crc: document all the CRC library kconfig options lib/crc: remove unnecessary prompt for CONFIG_CRC_ITU_T lib/crc: remove unnecessary prompt for CONFIG_CRC_T10DIF lib/crc: remove unnecessary prompt for CONFIG_CRC16 lib/crc: remove unnecessary prompt for CONFIG_CRC_CCITT lib/crc: remove unnecessary prompt for CONFIG_CRC32 and drop 'default y' |
||
|
Eric Biggers
|
f7915484c0 |
crypto: powerpc/chacha - remove the skcipher algorithms
Since crypto/chacha.c now registers chacha20-$(ARCH), xchacha20-$(ARCH), and xchacha12-$(ARCH) skcipher algorithms that use the architecture's ChaCha and HChaCha library functions, individual architectures no longer need to do the same. Therefore, remove the redundant skcipher algorithms and leave just the library functions. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Eric Biggers
|
4aa6dc909e |
crypto: chacha - centralize the skcipher wrappers for arch code
Following the example of the crc32 and crc32c code, make the crypto subsystem register both generic and architecture-optimized chacha20, xchacha20, and xchacha12 skcipher algorithms, all implemented on top of the appropriate library functions. This eliminates the need for every architecture to implement the same skcipher glue code. To register the architecture-optimized skciphers only when architecture-optimized code is actually being used, add a function chacha_is_arch_optimized() and make each arch implement it. Change each architecture's ChaCha module_init function to arch_initcall so that the CPU feature detection is guaranteed to run before chacha_is_arch_optimized() gets called by crypto/chacha.c. In the case of s390, remove the CPU feature based module autoloading, which is no longer needed since the module just gets pulled in via function linkage. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Linus Torvalds
|
16cd1c2657 |
A set of final cleanups for the timer subsystem:
1) Convert all del_timer[_sync]() instances over to the new
timer_delete[_sync]() API and remove the legacy wrappers.
Conversion was done with coccinelle plus some manual fixups as
coccinelle chokes on scoped_guard().
2) The final cleanup of the hrtimer_init() to hrtimer_setup() conversion.
This has been delayed to the end of the merge window, so that all
patches which have been merged through other trees are in mainline and
all new users are catched.
Doing this right before rc1 ensures that new code which is merged post rc1
is not introducing new instances of the original functionality.
-----BEGIN PGP SIGNATURE-----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=8Ftq
-----END PGP SIGNATURE-----
Merge tag 'timers-cleanups-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanups from Thomas Gleixner:
"A set of final cleanups for the timer subsystem:
- Convert all del_timer[_sync]() instances over to the new
timer_delete[_sync]() API and remove the legacy wrappers.
Conversion was done with coccinelle plus some manual fixups as
coccinelle chokes on scoped_guard().
- The final cleanup of the hrtimer_init() to hrtimer_setup()
conversion.
This has been delayed to the end of the merge window, so that all
patches which have been merged through other trees are in mainline
and all new users are catched.
Doing this right before rc1 ensures that new code which is merged post
rc1 is not introducing new instances of the original functionality"
* tag 'timers-cleanups-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tracing/timers: Rename the hrtimer_init event to hrtimer_setup
hrtimers: Rename debug_init_on_stack() to debug_setup_on_stack()
hrtimers: Rename debug_init() to debug_setup()
hrtimers: Rename __hrtimer_init_sleeper() to __hrtimer_setup_sleeper()
hrtimers: Remove unnecessary NULL check in hrtimer_start_range_ns()
hrtimers: Make callback function pointer private
hrtimers: Merge __hrtimer_init() into __hrtimer_setup()
hrtimers: Switch to use __htimer_setup()
hrtimers: Delete hrtimer_init()
treewide: Convert new and leftover hrtimer_init() users
treewide: Switch/rename to timer_delete[_sync]()
|
||
|
Thomas Gleixner
|
8fa7292fee |
treewide: Switch/rename to timer_delete[_sync]()
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree over and remove the historical wrapper inlines. Conversion was done with coccinelle plus manual fixups where necessary. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Eric Biggers
|
a0d55dd740 |
lib/crc: remove unnecessary prompt for CONFIG_CRC_ITU_T
All modules that need CONFIG_CRC_ITU_T already select it, so there is no need to bother users about the option. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20250401221600.24878-6-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> |
||
|
Eric Biggers
|
a6d0dbba95 |
lib/crc: remove unnecessary prompt for CONFIG_CRC_T10DIF
All modules that need CONFIG_CRC_T10DIF already select it, so there is no need to bother users about the option. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20250401221600.24878-5-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> |
||
|
Eric Biggers
|
2038af8eda |
lib/crc: remove unnecessary prompt for CONFIG_CRC16
All modules that need CONFIG_CRC16 already select it, so there is no need to bother users about the option. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20250401221600.24878-4-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> |
||
|
Eric Biggers
|
7939da264b |
lib/crc: remove unnecessary prompt for CONFIG_CRC_CCITT
All modules that need CONFIG_CRC_CCITT already select it, so there is no need to bother users about the option. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20250401221600.24878-3-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> |
||
|
Jiri Slaby (SUSE)
|
0a27ea384c |
irqdomain: Rename irq_get_default_host() to irq_get_default_domain()
Naming interrupt domains host is confusing at best and the irqdomain code uses both domain and host inconsistently. Therefore rename irq_get_default_host() to irq_get_default_domain(). Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/20250319092951.37667-4-jirislaby@kernel.org |
||
|
Jiri Slaby (SUSE)
|
825dfab23b |
irqdomain: Rename irq_set_default_host() to irq_set_default_domain()
Naming interrupt domains host is confusing at best and the irqdomain code uses both domain and host inconsistently. Therefore rename irq_set_default_host() to irq_set_default_domain(). Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/20250319092951.37667-3-jirislaby@kernel.org |
||
|
Linus Torvalds
|
e48e99b6ed |
fixes for bugs caught as part of tree-in-dcache work
mostly dentry refcount mishandling Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZ+3eRQAKCRBZ7Krx/gZQ 6/FlAP9uekG4L7IyvXBitM7fp/SU+YwiPJy3r/1gLLhEGAL6IwEAu+RfXVD9KY7+ yrsQi2i37uuUEit9KymVFUGeTJvAaQQ= =hjki -----END PGP SIGNATURE----- Merge tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull dcache fixes from Al Viro: "Fixes for bugs caught as part of tree-in-dcache work. Mostly dentry refcount mishandling" * tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: hypfs_create_cpu_files(): add missing check for hypfs_mkdir() failure qibfs: fix _another_ leak spufs: fix a leak in spufs_create_context() spufs: fix gang directory lifetimes spufs: fix a leak on spufs_new_file() failure |
||
|
Linus Torvalds
|
0a87d6bb6f |
powerpc updates for 6.15 #2
- Remove the IBM CAPI (cxl) driver Thanks to: Andrew Donnellan. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRjvi15rv0TSTaE+SIF0oADX8seIQUCZ+0ppwAKCRAF0oADX8se IW2NAQDU+ZNn8xlyePGg2lRE+RZHndB8QL3AqiA0G9MxOKf1zwEA1XxGuqhqhRTx tMqKobTucDuDzS9IoE9jWXj5Eo9QBgs= =lpPm -----END PGP SIGNATURE----- Merge tag 'powerpc-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull more powerpc updates from Michael Ellerman: - Remove the IBM CAPI (cxl) driver Thanks to Andrew Donnellan. * tag 'powerpc-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: docs: Fix references to IBM CAPI (cxl) removal version cxl: Remove driver |
||
|
Michael Ellerman
|
64f7efb0f5 |
Merge branch 'topic/cxl' into next
This merges in the removal of the IBM CAPI "cxl" driver. |
||
|
Linus Torvalds
|
2cd5769fb0 |
Driver core updates for 6.15-rc1
Here is the big set of driver core updates for 6.15-rc1. Lots of stuff
happened this development cycle, including:
- kernfs scaling changes to make it even faster thanks to rcu
- bin_attribute constify work in many subsystems
- faux bus minor tweaks for the rust bindings
- rust binding updates for driver core, pci, and platform busses,
making more functionaliy available to rust drivers. These are all
due to people actually trying to use the bindings that were in 6.14.
- make Rafael and Danilo full co-maintainers of the driver core
codebase
- other minor fixes and updates.
This has been in linux-next for a while now, with the only reported
issue being some merge conflicts with the rust tree. Depending on which
tree you pull first, you will have conflicts in one of them. The merge
resolution has been in linux-next as an example of what to do, or can be
found here:
https://lore.kernel.org/r/CANiq72n3Xe8JcnEjirDhCwQgvWoE65dddWecXnfdnbrmuah-RQ@mail.gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ+mMrg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylRgwCdH58OE3BgL0uoFY5vFImStpmPtqUAoL5HpVWI
jtbJ+UuXGsnmO+JVNBEv
=gy6W
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updatesk from Greg KH:
"Here is the big set of driver core updates for 6.15-rc1. Lots of stuff
happened this development cycle, including:
- kernfs scaling changes to make it even faster thanks to rcu
- bin_attribute constify work in many subsystems
- faux bus minor tweaks for the rust bindings
- rust binding updates for driver core, pci, and platform busses,
making more functionaliy available to rust drivers. These are all
due to people actually trying to use the bindings that were in
6.14.
- make Rafael and Danilo full co-maintainers of the driver core
codebase
- other minor fixes and updates"
* tag 'driver-core-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (52 commits)
rust: platform: require Send for Driver trait implementers
rust: pci: require Send for Driver trait implementers
rust: platform: impl Send + Sync for platform::Device
rust: pci: impl Send + Sync for pci::Device
rust: platform: fix unrestricted &mut platform::Device
rust: pci: fix unrestricted &mut pci::Device
rust: device: implement device context marker
rust: pci: use to_result() in enable_device_mem()
MAINTAINERS: driver core: mark Rafael and Danilo as co-maintainers
rust/kernel/faux: mark Registration methods inline
driver core: faux: only create the device if probe() succeeds
rust/faux: Add missing parent argument to Registration::new()
rust/faux: Drop #[repr(transparent)] from faux::Registration
rust: io: fix devres test with new io accessor functions
rust: io: rename `io::Io` accessors
kernfs: Move dput() outside of the RCU section.
efi: rci2: mark bin_attribute as __ro_after_init
rapidio: constify 'struct bin_attribute'
firmware: qemu_fw_cfg: constify 'struct bin_attribute'
powerpc/perf/hv-24x7: Constify 'struct bin_attribute'
...
|
||
|
Linus Torvalds
|
d6b02199cd |
- The 7 patch series "powerpc/crash: use generic crashkernel
reservation" from Sourabh Jain changes powerpc's kexec code to use more of the generic layers. - The 2 patch series "get_maintainer: report subsystem status separately" from Vlastimil Babka makes some long-requested improvements to the get_maintainer output. - The 4 patch series "ucount: Simplify refcounting with rcuref_t" from Sebastian Siewior cleans up and optimizing the refcounting in the ucount code. - The 12 patch series "reboot: support runtime configuration of emergency hw_protection action" from Ahmad Fatoum improves the ability for a driver to perform an emergency system shutdown or reboot. - The 16 patch series "Converge on using secs_to_jiffies() part two" from Easwar Hariharan performs further migrations from msecs_to_jiffies() to secs_to_jiffies(). - The 7 patch series "lib/interval_tree: add some test cases and cleanup" from Wei Yang permits more userspace testing of kernel library code, adds some more tests and performs some cleanups. - The 2 patch series "hung_task: Dump the blocking task stacktrace" from Masami Hiramatsu arranges for the hung_task detector to dump the stack of the blocking task and not just that of the blocked task. - The 4 patch series "resource: Split and use DEFINE_RES*() macros" from Andy Shevchenko provides some cleanups to the resource definition macros. - Plus the usual shower of singleton patches - please see the individual changelogs for details. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZ+nuqwAKCRDdBJ7gKXxA jtNqAQDxqJpjWkzn4yN9CNSs1ivVx3fr6SqazlYCrt3u89WQvwEA1oRrGpETzUGq r6khQUIcQImPPcjFqEFpuiSOU0MBZA0= =Kii8 -----END PGP SIGNATURE----- Merge tag 'mm-nonmm-stable-2025-03-30-18-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-MM updates from Andrew Morton: - The series "powerpc/crash: use generic crashkernel reservation" from Sourabh Jain changes powerpc's kexec code to use more of the generic layers. - The series "get_maintainer: report subsystem status separately" from Vlastimil Babka makes some long-requested improvements to the get_maintainer output. - The series "ucount: Simplify refcounting with rcuref_t" from Sebastian Siewior cleans up and optimizing the refcounting in the ucount code. - The series "reboot: support runtime configuration of emergency hw_protection action" from Ahmad Fatoum improves the ability for a driver to perform an emergency system shutdown or reboot. - The series "Converge on using secs_to_jiffies() part two" from Easwar Hariharan performs further migrations from msecs_to_jiffies() to secs_to_jiffies(). - The series "lib/interval_tree: add some test cases and cleanup" from Wei Yang permits more userspace testing of kernel library code, adds some more tests and performs some cleanups. - The series "hung_task: Dump the blocking task stacktrace" from Masami Hiramatsu arranges for the hung_task detector to dump the stack of the blocking task and not just that of the blocked task. - The series "resource: Split and use DEFINE_RES*() macros" from Andy Shevchenko provides some cleanups to the resource definition macros. - Plus the usual shower of singleton patches - please see the individual changelogs for details. * tag 'mm-nonmm-stable-2025-03-30-18-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (77 commits) mailmap: consolidate email addresses of Alexander Sverdlin fs/procfs: fix the comment above proc_pid_wchan() relay: use kasprintf() instead of fixed buffer formatting resource: replace open coded variant of DEFINE_RES() resource: replace open coded variants of DEFINE_RES_*_NAMED() resource: replace open coded variant of DEFINE_RES_NAMED_DESC() resource: split DEFINE_RES_NAMED_DESC() out of DEFINE_RES_NAMED() samples: add hung_task detector mutex blocking sample hung_task: show the blocker task if the task is hung on mutex kexec_core: accept unaccepted kexec segments' destination addresses watchdog/perf: optimize bytes copied and remove manual NUL-termination lib/interval_tree: fix the comment of interval_tree_span_iter_next_gap() lib/interval_tree: skip the check before go to the right subtree lib/interval_tree: add test case for span iteration lib/interval_tree: add test case for interval_tree_iter_xxx() helpers lib/rbtree: add random seed lib/rbtree: split tests lib/rbtree: enable userland test suite for rbtree related data structure checkpatch: describe --min-conf-desc-length scripts/gdb/symbols: determine KASLR offset on s390 ... |
||
|
Linus Torvalds
|
eb0ece1602 |
- The 6 patch series "Enable strict percpu address space checks" from
Uros Bizjak uses x86 named address space qualifiers to provide compile-time checking of percpu area accesses. This has caused a small amount of fallout - two or three issues were reported. In all cases the calling code was founf to be incorrect. - The 4 patch series "Some cleanup for memcg" from Chen Ridong implements some relatively monir cleanups for the memcontrol code. - The 17 patch series "mm: fixes for device-exclusive entries (hmm)" from David Hildenbrand fixes a boatload of issues which David found then using device-exclusive PTE entries when THP is enabled. More work is needed, but this makes thins better - our own HMM selftests now succeed. - The 2 patch series "mm: zswap: remove z3fold and zbud" from Yosry Ahmed remove the z3fold and zbud implementations. They have been deprecated for half a year and nobody has complained. - The 5 patch series "mm: further simplify VMA merge operation" from Lorenzo Stoakes implements numerous simplifications in this area. No runtime effects are anticipated. - The 4 patch series "mm/madvise: remove redundant mmap_lock operations from process_madvise()" from SeongJae Park rationalizes the locking in the madvise() implementation. Performance gains of 20-25% were observed in one MADV_DONTNEED microbenchmark. - The 12 patch series "Tiny cleanup and improvements about SWAP code" from Baoquan He contains a number of touchups to issues which Baoquan noticed when working on the swap code. - The 2 patch series "mm: kmemleak: Usability improvements" from Catalin Marinas implements a couple of improvements to the kmemleak user-visible output. - The 2 patch series "mm/damon/paddr: fix large folios access and schemes handling" from Usama Arif provides a couple of fixes for DAMON's handling of large folios. - The 3 patch series "mm/damon/core: fix wrong and/or useless damos_walk() behaviors" from SeongJae Park fixes a few issues with the accuracy of kdamond's walking of DAMON regions. - The 3 patch series "expose mapping wrprotect, fix fb_defio use" from Lorenzo Stoakes changes the interaction between framebuffer deferred-io and core MM. No functional changes are anticipated - this is preparatory work for the future removal of page structure fields. - The 4 patch series "mm/damon: add support for hugepage_size DAMOS filter" from Usama Arif adds a DAMOS filter which permits the filtering by huge page sizes. - The 4 patch series "mm: permit guard regions for file-backed/shmem mappings" from Lorenzo Stoakes extends the guard region feature from its present "anon mappings only" state. The feature now covers shmem and file-backed mappings. - The 4 patch series "mm: batched unmap lazyfree large folios during reclamation" from Barry Song cleans up and speeds up the unmapping for pte-mapped large folios. - The 18 patch series "reimplement per-vma lock as a refcount" from Suren Baghdasaryan puts the vm_lock back into the vma. Our reasons for pulling it out were largely bogus and that change made the code more messy. This patchset provides small (0-10%) improvements on one microbenchmark. - The 5 patch series "Docs/mm/damon: misc DAMOS filters documentation fixes and improves" from SeongJae Park does some maintenance work on the DAMON docs. - The 27 patch series "hugetlb/CMA improvements for large systems" from Frank van der Linden addresses a pile of issues which have been observed when using CMA on large machines. - The 2 patch series "mm/damon: introduce DAMOS filter type for unmapped pages" from SeongJae Park enables users of DMAON/DAMOS to filter my the page's mapped/unmapped status. - The 19 patch series "zsmalloc/zram: there be preemption" from Sergey Senozhatsky teaches zram to run its compression and decompression operations preemptibly. - The 12 patch series "selftests/mm: Some cleanups from trying to run them" from Brendan Jackman fixes a pile of unrelated issues which Brendan encountered while runnimg our selftests. - The 2 patch series "fs/proc/task_mmu: add guard region bit to pagemap" from Lorenzo Stoakes permits userspace to use /proc/pid/pagemap to determine whether a particular page is a guard page. - The 7 patch series "mm, swap: remove swap slot cache" from Kairui Song removes the swap slot cache from the allocation path - it simply wasn't being effective. - The 5 patch series "mm: cleanups for device-exclusive entries (hmm)" from David Hildenbrand implements a number of unrelated cleanups in this code. - The 5 patch series "mm: Rework generic PTDUMP configs" from Anshuman Khandual implements a number of preparatoty cleanups to the GENERIC_PTDUMP Kconfig logic. - The 8 patch series "mm/damon: auto-tune aggregation interval" from SeongJae Park implements a feedback-driven automatic tuning feature for DAMON's aggregation interval tuning. - The 5 patch series "Fix lazy mmu mode" from Ryan Roberts fixes some issues in powerpc, sparc and x86 lazy MMU implementations. Ryan did this in preparation for implementing lazy mmu mode for arm64 to optimize vmalloc. - The 2 patch series "mm/page_alloc: Some clarifications for migratetype fallback" from Brendan Jackman reworks some commentary to make the code easier to follow. - The 3 patch series "page_counter cleanup and size reduction" from Shakeel Butt cleans up the page_counter code and fixes a size increase which we accidentally added late last year. - The 3 patch series "Add a command line option that enables control of how many threads should be used to allocate huge pages" from Thomas Prescher does that. It allows the careful operator to significantly reduce boot time by tuning the parallalization of huge page initialization. - The 3 patch series "Fix calculations in trace_balance_dirty_pages() for cgwb" from Tang Yizhou fixes the tracing output from the dirty page balancing code. - The 9 patch series "mm/damon: make allow filters after reject filters useful and intuitive" from SeongJae Park improves the handling of allow and reject filters. Behaviour is made more consistent and the documention is updated accordingly. - The 5 patch series "Switch zswap to object read/write APIs" from Yosry Ahmed updates zswap to the new object read/write APIs and thus permits the removal of some legacy code from zpool and zsmalloc. - The 6 patch series "Some trivial cleanups for shmem" from Baolin Wang does as it claims. - The 20 patch series "fs/dax: Fix ZONE_DEVICE page reference counts" from Alistair Popple regularizes the weird ZONE_DEVICE page refcount handling in DAX, permittig the removal of a number of special-case checks. - The 4 patch series "refactor mremap and fix bug" from Lorenzo Stoakes is a preparatoty refactoring and cleanup of the mremap() code. - The 20 patch series "mm: MM owner tracking for large folios (!hugetlb) + CONFIG_NO_PAGE_MAPCOUNT" from David Hildenbrand reworks the manner in which we determine whether a large folio is known to be mapped exclusively into a single MM. - The 8 patch series "mm/damon: add sysfs dirs for managing DAMOS filters based on handling layers" from SeongJae Park adds a couple of new sysfs directories to ease the management of DAMON/DAMOS filters. - The 13 patch series "arch, mm: reduce code duplication in mem_init()" from Mike Rapoport consolidates many per-arch implementations of mem_init() into code generic code, where that is practical. - The 13 patch series "mm/damon/sysfs: commit parameters online via damon_call()" from SeongJae Park continues the cleaning up of sysfs access to DAMON internal data. - The 3 patch series "mm: page_ext: Introduce new iteration API" from Luiz Capitulino reworks the page_ext initialization to fix a boot-time crash which was observed with an unusual combination of compile and cmdline options. - The 8 patch series "Buddy allocator like (or non-uniform) folio split" from Zi Yan reworks the code to split a folio into smaller folios. The main benefit is lessened memory consumption: fewer post-split folios are generated. - The 2 patch series "Minimize xa_node allocation during xarry split" from Zi Yan reduces the number of xarray xa_nodes which are generated during an xarray split. - The 2 patch series "drivers/base/memory: Two cleanups" from Gavin Shan performs some maintenance work on the drivers/base/memory code. - The 3 patch series "Add tracepoints for lowmem reserves, watermarks and totalreserve_pages" from Martin Liu adds some more tracepoints to the page allocator code. - The 4 patch series "mm/madvise: cleanup requests validations and classifications" from SeongJae Park cleans up some warts which SeongJae observed during his earlier madvise work. - The 3 patch series "mm/hwpoison: Fix regressions in memory failure handling" from Shuai Xue addresses two quite serious regressions which Shuai has observed in the memory-failure implementation. - The 5 patch series "mm: reliable huge page allocator" from Johannes Weiner makes huge page allocations cheaper and more reliable by reducing fragmentation. - The 5 patch series "Minor memcg cleanups & prep for memdescs" from Matthew Wilcox is preparatory work for the future implementation of memdescs. - The 4 patch series "track memory used by balloon drivers" from Nico Pache introduces a way to track memory used by our various balloon drivers. - The 2 patch series "mm/damon: introduce DAMOS filter type for active pages" from Nhat Pham permits users to filter for active/inactive pages, separately for file and anon pages. - The 2 patch series "Adding Proactive Memory Reclaim Statistics" from Hao Jia separates the proactive reclaim statistics from the direct reclaim statistics. - The 2 patch series "mm/vmscan: don't try to reclaim hwpoison folio" from Jinjiang Tu fixes our handling of hwpoisoned pages within the reclaim code. -----BEGIN PGP SIGNATURE----- iHQEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZ+nZaAAKCRDdBJ7gKXxA jsOWAPiP4r7CJHMZRK4eyJOkvS1a1r+TsIarrFZtjwvf/GIfAQCEG+JDxVfUaUSF Ee93qSSLR1BkNdDw+931Pu0mXfbnBw== =Pn2K -----END PGP SIGNATURE----- Merge tag 'mm-stable-2025-03-30-16-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - The series "Enable strict percpu address space checks" from Uros Bizjak uses x86 named address space qualifiers to provide compile-time checking of percpu area accesses. This has caused a small amount of fallout - two or three issues were reported. In all cases the calling code was found to be incorrect. - The series "Some cleanup for memcg" from Chen Ridong implements some relatively monir cleanups for the memcontrol code. - The series "mm: fixes for device-exclusive entries (hmm)" from David Hildenbrand fixes a boatload of issues which David found then using device-exclusive PTE entries when THP is enabled. More work is needed, but this makes thins better - our own HMM selftests now succeed. - The series "mm: zswap: remove z3fold and zbud" from Yosry Ahmed remove the z3fold and zbud implementations. They have been deprecated for half a year and nobody has complained. - The series "mm: further simplify VMA merge operation" from Lorenzo Stoakes implements numerous simplifications in this area. No runtime effects are anticipated. - The series "mm/madvise: remove redundant mmap_lock operations from process_madvise()" from SeongJae Park rationalizes the locking in the madvise() implementation. Performance gains of 20-25% were observed in one MADV_DONTNEED microbenchmark. - The series "Tiny cleanup and improvements about SWAP code" from Baoquan He contains a number of touchups to issues which Baoquan noticed when working on the swap code. - The series "mm: kmemleak: Usability improvements" from Catalin Marinas implements a couple of improvements to the kmemleak user-visible output. - The series "mm/damon/paddr: fix large folios access and schemes handling" from Usama Arif provides a couple of fixes for DAMON's handling of large folios. - The series "mm/damon/core: fix wrong and/or useless damos_walk() behaviors" from SeongJae Park fixes a few issues with the accuracy of kdamond's walking of DAMON regions. - The series "expose mapping wrprotect, fix fb_defio use" from Lorenzo Stoakes changes the interaction between framebuffer deferred-io and core MM. No functional changes are anticipated - this is preparatory work for the future removal of page structure fields. - The series "mm/damon: add support for hugepage_size DAMOS filter" from Usama Arif adds a DAMOS filter which permits the filtering by huge page sizes. - The series "mm: permit guard regions for file-backed/shmem mappings" from Lorenzo Stoakes extends the guard region feature from its present "anon mappings only" state. The feature now covers shmem and file-backed mappings. - The series "mm: batched unmap lazyfree large folios during reclamation" from Barry Song cleans up and speeds up the unmapping for pte-mapped large folios. - The series "reimplement per-vma lock as a refcount" from Suren Baghdasaryan puts the vm_lock back into the vma. Our reasons for pulling it out were largely bogus and that change made the code more messy. This patchset provides small (0-10%) improvements on one microbenchmark. - The series "Docs/mm/damon: misc DAMOS filters documentation fixes and improves" from SeongJae Park does some maintenance work on the DAMON docs. - The series "hugetlb/CMA improvements for large systems" from Frank van der Linden addresses a pile of issues which have been observed when using CMA on large machines. - The series "mm/damon: introduce DAMOS filter type for unmapped pages" from SeongJae Park enables users of DMAON/DAMOS to filter my the page's mapped/unmapped status. - The series "zsmalloc/zram: there be preemption" from Sergey Senozhatsky teaches zram to run its compression and decompression operations preemptibly. - The series "selftests/mm: Some cleanups from trying to run them" from Brendan Jackman fixes a pile of unrelated issues which Brendan encountered while runnimg our selftests. - The series "fs/proc/task_mmu: add guard region bit to pagemap" from Lorenzo Stoakes permits userspace to use /proc/pid/pagemap to determine whether a particular page is a guard page. - The series "mm, swap: remove swap slot cache" from Kairui Song removes the swap slot cache from the allocation path - it simply wasn't being effective. - The series "mm: cleanups for device-exclusive entries (hmm)" from David Hildenbrand implements a number of unrelated cleanups in this code. - The series "mm: Rework generic PTDUMP configs" from Anshuman Khandual implements a number of preparatoty cleanups to the GENERIC_PTDUMP Kconfig logic. - The series "mm/damon: auto-tune aggregation interval" from SeongJae Park implements a feedback-driven automatic tuning feature for DAMON's aggregation interval tuning. - The series "Fix lazy mmu mode" from Ryan Roberts fixes some issues in powerpc, sparc and x86 lazy MMU implementations. Ryan did this in preparation for implementing lazy mmu mode for arm64 to optimize vmalloc. - The series "mm/page_alloc: Some clarifications for migratetype fallback" from Brendan Jackman reworks some commentary to make the code easier to follow. - The series "page_counter cleanup and size reduction" from Shakeel Butt cleans up the page_counter code and fixes a size increase which we accidentally added late last year. - The series "Add a command line option that enables control of how many threads should be used to allocate huge pages" from Thomas Prescher does that. It allows the careful operator to significantly reduce boot time by tuning the parallalization of huge page initialization. - The series "Fix calculations in trace_balance_dirty_pages() for cgwb" from Tang Yizhou fixes the tracing output from the dirty page balancing code. - The series "mm/damon: make allow filters after reject filters useful and intuitive" from SeongJae Park improves the handling of allow and reject filters. Behaviour is made more consistent and the documention is updated accordingly. - The series "Switch zswap to object read/write APIs" from Yosry Ahmed updates zswap to the new object read/write APIs and thus permits the removal of some legacy code from zpool and zsmalloc. - The series "Some trivial cleanups for shmem" from Baolin Wang does as it claims. - The series "fs/dax: Fix ZONE_DEVICE page reference counts" from Alistair Popple regularizes the weird ZONE_DEVICE page refcount handling in DAX, permittig the removal of a number of special-case checks. - The series "refactor mremap and fix bug" from Lorenzo Stoakes is a preparatoty refactoring and cleanup of the mremap() code. - The series "mm: MM owner tracking for large folios (!hugetlb) + CONFIG_NO_PAGE_MAPCOUNT" from David Hildenbrand reworks the manner in which we determine whether a large folio is known to be mapped exclusively into a single MM. - The series "mm/damon: add sysfs dirs for managing DAMOS filters based on handling layers" from SeongJae Park adds a couple of new sysfs directories to ease the management of DAMON/DAMOS filters. - The series "arch, mm: reduce code duplication in mem_init()" from Mike Rapoport consolidates many per-arch implementations of mem_init() into code generic code, where that is practical. - The series "mm/damon/sysfs: commit parameters online via damon_call()" from SeongJae Park continues the cleaning up of sysfs access to DAMON internal data. - The series "mm: page_ext: Introduce new iteration API" from Luiz Capitulino reworks the page_ext initialization to fix a boot-time crash which was observed with an unusual combination of compile and cmdline options. - The series "Buddy allocator like (or non-uniform) folio split" from Zi Yan reworks the code to split a folio into smaller folios. The main benefit is lessened memory consumption: fewer post-split folios are generated. - The series "Minimize xa_node allocation during xarry split" from Zi Yan reduces the number of xarray xa_nodes which are generated during an xarray split. - The series "drivers/base/memory: Two cleanups" from Gavin Shan performs some maintenance work on the drivers/base/memory code. - The series "Add tracepoints for lowmem reserves, watermarks and totalreserve_pages" from Martin Liu adds some more tracepoints to the page allocator code. - The series "mm/madvise: cleanup requests validations and classifications" from SeongJae Park cleans up some warts which SeongJae observed during his earlier madvise work. - The series "mm/hwpoison: Fix regressions in memory failure handling" from Shuai Xue addresses two quite serious regressions which Shuai has observed in the memory-failure implementation. - The series "mm: reliable huge page allocator" from Johannes Weiner makes huge page allocations cheaper and more reliable by reducing fragmentation. - The series "Minor memcg cleanups & prep for memdescs" from Matthew Wilcox is preparatory work for the future implementation of memdescs. - The series "track memory used by balloon drivers" from Nico Pache introduces a way to track memory used by our various balloon drivers. - The series "mm/damon: introduce DAMOS filter type for active pages" from Nhat Pham permits users to filter for active/inactive pages, separately for file and anon pages. - The series "Adding Proactive Memory Reclaim Statistics" from Hao Jia separates the proactive reclaim statistics from the direct reclaim statistics. - The series "mm/vmscan: don't try to reclaim hwpoison folio" from Jinjiang Tu fixes our handling of hwpoisoned pages within the reclaim code. * tag 'mm-stable-2025-03-30-16-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (431 commits) mm/page_alloc: remove unnecessary __maybe_unused in order_to_pindex() x86/mm: restore early initialization of high_memory for 32-bits mm/vmscan: don't try to reclaim hwpoison folio mm/hwpoison: introduce folio_contain_hwpoisoned_page() helper cgroup: docs: add pswpin and pswpout items in cgroup v2 doc mm: vmscan: split proactive reclaim statistics from direct reclaim statistics selftests/mm: speed up split_huge_page_test selftests/mm: uffd-unit-tests support for hugepages > 2M docs/mm/damon/design: document active DAMOS filter type mm/damon: implement a new DAMOS filter type for active pages fs/dax: don't disassociate zero page entries MM documentation: add "Unaccepted" meminfo entry selftests/mm: add commentary about 9pfs bugs fork: use __vmalloc_node() for stack allocation docs/mm: Physical Memory: Populate the "Zones" section xen: balloon: update the NR_BALLOON_PAGES state hv_balloon: update the NR_BALLOON_PAGES state balloon_compaction: update the NR_BALLOON_PAGES state meminfo: add a per node counter for balloon drivers mm: remove references to folio in __memcg_kmem_uncharge_page() ... |
||
|
Linus Torvalds
|
01d5b167dc |
Modules changes for 6.15-rc1
- Use RCU instead of RCU-sched
The mix of rcu_read_lock(), rcu_read_lock_sched() and preempt_disable()
in the module code and its users has been replaced with just
rcu_read_lock().
- The rest of changes are smaller fixes and updates.
The changes have been on linux-next for at least 2 weeks, with the RCU
cleanup present for 2 months. One performance problem was reported with the
RCU change when KASAN + lockdep were enabled, but it was effectively
addressed by the already merged
|
||
|
Linus Torvalds
|
e5e0e6bebe |
This update includes the following changes:
API: - Remove legacy compression interface. - Improve scatterwalk API. - Add request chaining to ahash and acomp. - Add virtual address support to ahash and acomp. - Add folio support to acomp. - Remove NULL dst support from acomp. Algorithms: - Library options are fuly hidden (selected by kernel users only). - Add Kerberos5 algorithms. - Add VAES-based ctr(aes) on x86. - Ensure LZO respects output buffer length on compression. - Remove obsolete SIMD fallback code path from arm/ghash-ce. Drivers: - Add support for PCI device 0x1134 in ccp. - Add support for rk3588's standalone TRNG in rockchip. - Add Inside Secure SafeXcel EIP-93 crypto engine support in eip93. - Fix bugs in tegra uncovered by multi-threaded self-test. - Fix corner cases in hisilicon/sec2. Others: - Add SG_MITER_LOCAL to sg miter. - Convert ubifs, hibernate and xfrm_ipcomp from legacy API to acomp. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEn51F/lCuNhUwmDeSxycdCkmxi6cFAmfiQ9kACgkQxycdCkmx i6fFZg/9GWjC1FLEV66vNlYAIzFGwzwWdFGyQzXyP235Cphhm4qt9gx7P91N6Lvc pplVjNEeZHoP8lMw+AIeGc2cRhIwsvn8C+HA3tCBOoC1qSe8T9t7KHAgiRGd/0iz UrzVBFLYlR9i4tc0T5peyQwSctv8DfjWzduTmI3Ts8i7OQcfeVVgj3sGfWam7kjF 1GJWIQH7aPzT8cwFtk8gAK1insuPPZelT1Ppl9kUeZe0XUibrP7Gb5G9simxXAyi B+nLCaJYS6Hc1f47cfR/qyZSeYQN35KTVrEoKb1pTYXfEtMv6W9fIvQVLJRYsqpH RUBdDJUseE+WckR6glX9USrh+Fv9d+HfsTXh1fhpApKU5sQJ7pDbUm4ge8p6htNG MIszbJPdqajYveRLuPUjFlUXaqomos8eT6BZA+RLHm1cogzEOm+5bjspbfRNAVPj x9KiDu5lXNiFj02v/MkLKUe3bnGIyVQnZNi7Rn0Rpxjv95tIjVpksZWMPJarxUC6 5zdyM2I5X0Z9+teBpbfWyqfzSbAs/KpzV8S/xNvWDUT6NlpYGBeNXrCDTXcwJLAh PRW0w1EJUwsZbPi8GEh5jNzo/YK1cGsUKrihKv7YgqSSopMLI8e/WVr8nKZMVDFA O+6F6ec5lR7KsOIMGUqrBGFU1ccAeaLLvLK3H5J8//gMMg82Uik= =aQNt -----END PGP SIGNATURE----- Merge tag 'v6.15-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Remove legacy compression interface - Improve scatterwalk API - Add request chaining to ahash and acomp - Add virtual address support to ahash and acomp - Add folio support to acomp - Remove NULL dst support from acomp Algorithms: - Library options are fuly hidden (selected by kernel users only) - Add Kerberos5 algorithms - Add VAES-based ctr(aes) on x86 - Ensure LZO respects output buffer length on compression - Remove obsolete SIMD fallback code path from arm/ghash-ce Drivers: - Add support for PCI device 0x1134 in ccp - Add support for rk3588's standalone TRNG in rockchip - Add Inside Secure SafeXcel EIP-93 crypto engine support in eip93 - Fix bugs in tegra uncovered by multi-threaded self-test - Fix corner cases in hisilicon/sec2 Others: - Add SG_MITER_LOCAL to sg miter - Convert ubifs, hibernate and xfrm_ipcomp from legacy API to acomp" * tag 'v6.15-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (187 commits) crypto: testmgr - Add multibuffer acomp testing crypto: acomp - Fix synchronous acomp chaining fallback crypto: testmgr - Add multibuffer hash testing crypto: hash - Fix synchronous ahash chaining fallback crypto: arm/ghash-ce - Remove SIMD fallback code path crypto: essiv - Replace memcpy() + NUL-termination with strscpy() crypto: api - Call crypto_alg_put in crypto_unregister_alg crypto: scompress - Fix incorrect stream freeing crypto: lib/chacha - remove unused arch-specific init support crypto: remove obsolete 'comp' compression API crypto: compress_null - drop obsolete 'comp' implementation crypto: cavium/zip - drop obsolete 'comp' implementation crypto: zstd - drop obsolete 'comp' implementation crypto: lzo - drop obsolete 'comp' implementation crypto: lzo-rle - drop obsolete 'comp' implementation crypto: lz4hc - drop obsolete 'comp' implementation crypto: lz4 - drop obsolete 'comp' implementation crypto: deflate - drop obsolete 'comp' implementation crypto: 842 - drop obsolete 'comp' implementation crypto: nx - Migrate to scomp API ... |
||
|
Linus Torvalds
|
7b667acd69 |
powerpc updates for 6.15
- Removal of support for IBM Cell Blades - SMP support for microwatt platform - Support for inline static calls on PPC32 - Enable pmu selftests for power11 platform - Enable hardware trace macro (HTM) hcall support - Support for limited address mode capability - Changes to RMA size from 512 MB to 768 MB to handle fadump - Misc fixes and cleanups Thanks to: Abhishek Dubey, Amit Machhiwal, Andreas Schwab, Arnd Bergmann, Athira Rajeev, Avnish Chouhan, Christophe Leroy, Disha Goel, Donet Tom, Gaurav Batra, Gautam Menghani, Hari Bathini, Kajol Jain, Kees Cook, Mahesh Salgaonkar, Michael Ellerman, Paul Mackerras, Ritesh Harjani (IBM), Sathvika Vasireddy, Segher Boessenkool, Sourabh Jain, Vaibhav Jain, Venkat Rao Bagalkote. -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEqX2DNAOgU8sBX3pRpnEsdPSHZJQFAmfjZnYACgkQpnEsdPSH ZJTmKg/+NGW7wyFY9d8Iai9ncYY7GSzsMSDTaan7qg0QWOd5gjHbsdbava7TM/DW 8p9XsC+17kSeftRNUjtc52bSN8Ei2gBdsXIagQG1alfB2X2e6wkNauifK+dz3Su6 usMEZZTO5R/jFDotFXNM1nsUj+8dvjnPgOUrji/P8k7PT5295wpza0hz1fy5SrOA hM5cliBP36UgFe5Efvgm4OUX2gQIhbc3stt9MVfymW/k0Mit5f41UIPuVGiTWowY s0cUJGkhxUlGXT3VfOVKuZfn4u9KMha7UCl9afSceJzXOdnUIKIbskui1VEv6cD/ iSIxi839uErAobFHlsLYprgYFciYLII3xe2qNZCA/ZxeIMS/Mm6xokESeWLhBnfa P7ke6l0z3GDtTvgI2eSeU9BdrVveF1NgbP9GYSKgT6gtw/kRRnxgHF8tzmLON5PT KXpQlzz8VuSBRtF2jnLFU89+FFwSA1bRUhDrp89HyYFqw1B5g4N7kFFTUJWHOuKS fwPGy+cveKehmCUBedeTRFqHvvqdwpD/WnPlQzCly3WxqdL8U/eTXYftMiAwuK28 ovLuSs3vRThKRQ8DnUa5oB0UGsjMpRV5LdvYkhw+x8mZKUR59oj4fx2ae4TtPakg dbAYuPPkCORdaSga/nV6vQgsLprFpcGX3dq6E19+BVBAY5D+1PE= =GFcj -----END PGP SIGNATURE----- Merge tag 'powerpc-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Madhavan Srinivasan: - Remove support for IBM Cell Blades - SMP support for microwatt platform - Support for inline static calls on PPC32 - Enable pmu selftests for power11 platform - Enable hardware trace macro (HTM) hcall support - Support for limited address mode capability - Changes to RMA size from 512 MB to 768 MB to handle fadump - Misc fixes and cleanups Thanks to Abhishek Dubey, Amit Machhiwal, Andreas Schwab, Arnd Bergmann, Athira Rajeev, Avnish Chouhan, Christophe Leroy, Disha Goel, Donet Tom, Gaurav Batra, Gautam Menghani, Hari Bathini, Kajol Jain, Kees Cook, Mahesh Salgaonkar, Michael Ellerman, Paul Mackerras, Ritesh Harjani (IBM), Sathvika Vasireddy, Segher Boessenkool, Sourabh Jain, Vaibhav Jain, and Venkat Rao Bagalkote. * tag 'powerpc-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (61 commits) powerpc/kexec: fix physical address calculation in clear_utlb_entry() crypto: powerpc: Mark ghashp8-ppc.o as an OBJECT_FILES_NON_STANDARD powerpc: Fix 'intra_function_call not a direct call' warning powerpc/perf: Fix ref-counting on the PMU 'vpa_pmu' KVM: PPC: Enable CAP_SPAPR_TCE_VFIO on pSeries KVM guests powerpc/prom_init: Fixup missing #size-cells on PowerBook6,7 powerpc/microwatt: Add SMP support powerpc: Define config option for processors with broadcast TLBIE powerpc/microwatt: Define an idle power-save function powerpc/microwatt: Device-tree updates powerpc/microwatt: Select COMMON_CLK in order to get the clock framework net: toshiba: Remove reference to PPC_IBM_CELL_BLADE net: spider_net: Remove powerpc Cell driver cpufreq: ppc_cbe: Remove powerpc Cell driver genirq: Remove IRQ_EDGE_EOI_HANDLER docs: Remove reference to removed CBE_CPUFREQ_SPU_GOVERNOR powerpc: Remove UDBG_RTAS_CONSOLE powerpc/io: Use standard barrier macros in io.c powerpc/io: Rename _insw_ns() etc. powerpc/io: Use generic raw accessors ... |
||
|
Linus Torvalds
|
3a90a72aca |
asm-generic changes for 6.15
This is mainly set of cleanups of asm-generic/io.h, resolving problems with inconsistent semantics of ioread64/iowrite64 that were causing runtime and build issues. The "GENERIC_IOMAP" version that switches between inb()/outb() and readb()/writeb() style accessors is now only used on architectures that have PC-style ISA devices that are not memory mapped (x86, uml, m68k-q40 and powerpc-powernv), while alpha and parisc use a more complicated variant and everything else just maps the ioread interfaces to plan MMIO (readb/writeb etc). In addition there are two small changes from Raag Jadav to simplify the asm-generic/io.h indirect inclusions and from Jann Horn to fix a corner case with read_word_at_a_time. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmfkb2MACgkQYKtH/8kJ UicZMg//Va7h0cZBAM64yvHH9SJ1JrM2u4oZNspvcWuncpqaDp3/lFAUBf1m0m46 PhZ8mJmVm/qD7DH8uJRA4kI9t0hjeI1nwb2Pgo60omEpZKY2nIJMsJMIluQYEdAt nthz9RUvNOu0WSR/zMVmLfEAtncNewJzyUrlTnoQnIM9S+WQ8e5f1TxZbaz754Cb XYOpfZNj4nyP3wXtMedee3eZiKKxs/OcZBLoGyKnrBIkUbHCucXsAL962SoI3AXr pMjAIVNC1588fhOc2fA9Jl3K73j8Tj7/34UM+ztd5wxI1lwepxq4EDOCyJrhF5Oh z7oZ4laGoIc4i1aSrUWFK10TrcSBvC9D3zvUjYL8ryYw3HrpB3VppcObpCBtpWZS 97LGSlwq8UmkQOXt8xFzffOEDSh97ojxJAvUUUtuQtnS7PbkmyZ/OCnddBb0F7pa Bg68mzzZHm8/WUCMXwKxh+GA+qVZsMsPaPaexS/aG/TuV7+Mnj93GY1GSkj3Qzaw T9eUuGnFRCvSHU/WJ/Lrl4X1dFdWgHAbSOMNZBVfRFgSUt1ypChV1Sqt2jEfe6Uv dEeD84vZ0uhTsLoFVv/V4xY0osGKL+kAAtEwszLPfmP43kH+jC7cD3+CSTHW0IgV EHuFcjv2CraTF3wvX8Mph6ivoh1EwW/ycFm2mw8onloUUZaoMHM= =6j9g -----END PGP SIGNATURE----- Merge tag 'asm-generic-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic updates from Arnd Bergmann: "This is mainly set of cleanups of asm-generic/io.h, resolving problems with inconsistent semantics of ioread64/iowrite64 that were causing runtime and build issues. The "GENERIC_IOMAP" version that switches between inb()/outb() and readb()/writeb() style accessors is now only used on architectures that have PC-style ISA devices that are not memory mapped (x86, uml, m68k-q40 and powerpc-powernv), while alpha and parisc use a more complicated variant and everything else just maps the ioread interfaces to plan MMIO (readb/writeb etc). In addition there are two small changes from Raag Jadav to simplify the asm-generic/io.h indirect inclusions and from Jann Horn to fix a corner case with read_word_at_a_time" * tag 'asm-generic-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: rwonce: fix crash by removing READ_ONCE() for unaligned read rwonce: handle KCSAN like KASAN in read_word_at_a_time() m68k: coldfire: select PCI_IOMAP for PCI mips: export pci_iounmap() mips: fix PCI_IOBASE definition m68k/nommu: stop using GENERIC_IOMAP mips: drop GENERIC_IOMAP wrapper powerpc: asm/io.h: remove split ioread64/iowrite64 helpers parisc: stop using asm-generic/iomap.h sh: remove duplicate ioread/iowrite helpers alpha: stop using asm-generic/iomap.h io.h: drop unused headers drm/draw: include missing headers asm-generic/io.h: rework split ioread64/iowrite64 helpers |
||
|
Linus Torvalds
|
1a9239bb42 |
Networking changes for 6.15.
Core & protocols
----------------
- Continue Netlink conversions to per-namespace RTNL lock
(IPv4 routing, routing rules, routing next hops, ARP ioctls).
- Continue extending the use of netdev instance locks. As a driver
opt-in protect queue operations and (in due course) ethtool
operations with the instance lock and not RTNL lock.
- Support collecting TCP timestamps (data submitted, sent, acked)
in BPF, allowing for transparent (to the application) and lower
overhead tracking of TCP RPC performance.
- Tweak existing networking Rx zero-copy infra to support zero-copy
Rx via io_uring.
- Optimize MPTCP performance in single subflow mode by 29%.
- Enable GRO on packets which went thru XDP CPU redirect (were queued
for processing on a different CPU). Improving TCP stream performance
up to 2x.
- Improve performance of contended connect() by 200% by searching
for an available 4-tuple under RCU rather than a spin lock.
Bring an additional 229% improvement by tweaking hash distribution.
- Avoid unconditionally touching sk_tsflags on RX, improving
performance under UDP flood by as much as 10%.
- Avoid skb_clone() dance in ping_rcv() to improve performance under
ping flood.
- Avoid FIB lookup in netfilter if socket is available, 20% perf win.
- Rework network device creation (in-kernel) API to more clearly
identify network namespaces and their roles.
There are up to 4 namespace roles but we used to have just 2 netns
pointer arguments, interpreted differently based on context.
- Use sysfs_break_active_protection() instead of trylock to avoid
deadlocks between unregistering objects and sysfs access.
- Add a new sysctl and sockopt for capping max retransmit timeout
in TCP.
- Support masking port and DSCP in routing rule matches.
- Support dumping IPv4 multicast addresses with RTM_GETMULTICAST.
- Support specifying at what time packet should be sent on AF_XDP
sockets.
- Expose TCP ULP diagnostic info (for TLS and MPTCP) to non-admin users.
- Add Netlink YAML spec for WiFi (nl80211) and conntrack.
- Introduce EXPORT_IPV6_MOD() and EXPORT_IPV6_MOD_GPL() for symbols
which only need to be exported when IPv6 support is built as a module.
- Age FDB entries based on Rx not Tx traffic in VxLAN, similar
to normal bridging.
- Allow users to specify source port range for GENEVE tunnels.
- netconsole: allow attaching kernel release, CPU ID and task name
to messages as metadata
Driver API
----------
- Continue rework / fixing of Energy Efficient Ethernet (EEE) across
the SW layers. Delegate the responsibilities to phylink where possible.
Improve its handling in phylib.
- Support symmetric OR-XOR RSS hashing algorithm.
- Support tracking and preserving IRQ affinity by NAPI itself.
- Support loopback mode speed selection for interface selftests.
Device drivers
--------------
- Remove the IBM LCS driver for s390.
- Remove the sb1000 cable modem driver.
- Add support for SFP module access over SMBus.
- Add MCTP transport driver for MCTP-over-USB.
- Enable XDP metadata support in multiple drivers.
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- add PCIe TLP Processing Hints (TPH) support for new AMD platforms
- support dumping RoCE queue state for debug
- opt into instance locking
- Intel (100G, ice, idpf):
- ice: rework MSI-X IRQ management and distribution
- ice: support for E830 devices
- iavf: add support for Rx timestamping
- iavf: opt into instance locking
- nVidia/Mellanox:
- mlx4: use page pool memory allocator for Rx
- mlx5: support for one PTP device per hardware clock
- mlx5: support for 200Gbps per-lane link modes
- mlx5: move IPSec policy check after decryption
- AMD/Solarflare:
- support FW flashing via devlink
- Cisco (enic):
- use page pool memory allocator for Rx
- enable 32, 64 byte CQEs
- get max rx/tx ring size from the device
- Meta (fbnic):
- support flow steering and RSS configuration
- report queue stats
- support TCP segmentation
- support IRQ coalescing
- support ring size configuration
- Marvell/Cavium:
- support AF_XDP
- Wangxun:
- support for PTP clock and timestamping
- Huawei (hibmcge):
- checksum offload
- add more statistics
- Ethernet virtual:
- VirtIO net:
- aggressively suppress Tx completions, improve perf by 96% with
1 CPU and 55% with 2 CPUs
- expose NAPI to IRQ mapping and persist NAPI settings
- Google (gve):
- support XDP in DQO RDA Queue Format
- opt into instance locking
- Microsoft vNIC:
- support BIG TCP
- Ethernet NICs consumer, and embedded:
- Synopsys (stmmac):
- cleanup Tx and Tx clock setting and other link-focused cleanups
- enable SGMII and 2500BASEX mode switching for Intel platforms
- support Sophgo SG2044
- Broadcom switches (b53):
- support for BCM53101
- TI:
- iep: add perout configuration support
- icssg: support XDP
- Cadence (macb):
- implement BQL
- Xilinx (axinet):
- support dynamic IRQ moderation and changing coalescing at runtime
- implement BQL
- report standard stats
- MediaTek:
- support phylink managed EEE
- Intel:
- igc: don't restart the interface on every XDP program change
- RealTek (r8169):
- support reading registers of internal PHYs directly
- increase max jumbo packet size on RTL8125/RTL8126
- Airoha:
- support for RISC-V NPU packet processing unit
- enable scatter-gather and support MTU up to 9kB
- Tehuti (tn40xx):
- support cards with TN4010 MAC and an Aquantia AQR105 PHY
- Ethernet PHYs:
- support for TJA1102S, TJA1121
- dp83tg720: add randomized polling intervals for link detection
- dp83822: support changing the transmit amplitude voltage
- support for LEDs on 88q2xxx
- CAN:
- canxl: support Remote Request Substitution bit access
- flexcan: add S32G2/S32G3 SoC
- WiFi:
- remove cooked monitor support
- strict mode for better AP testing
- basic EPCS support
- OMI RX bandwidth reduction support
- batman-adv: add support for jumbo frames
- WiFi drivers:
- RealTek (rtw88):
- support RTL8814AE and RTL8814AU
- RealTek (rtw89):
- switch using wiphy_lock and wiphy_work
- add BB context to manipulate two PHY as preparation of MLO
- improve BT-coexistence mechanism to play A2DP smoothly
- Intel (iwlwifi):
- add new iwlmld sub-driver for latest HW/FW combinations
- MediaTek (mt76):
- preparation for mt7996 Multi-Link Operation (MLO) support
- Qualcomm/Atheros (ath12k):
- continued work on MLO
- Silabs (wfx):
- Wake-on-WLAN support
- Bluetooth:
- add support for skb TX SND/COMPLETION timestamping
- hci_core: enable buffer flow control for SCO/eSCO
- coredump: log devcd dumps into the monitor
- Bluetooth drivers:
- intel: add support to configure TX power
- nxp: handle bootloader error during cmd5 and cmd7
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=XY0S
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Continue Netlink conversions to per-namespace RTNL lock
(IPv4 routing, routing rules, routing next hops, ARP ioctls)
- Continue extending the use of netdev instance locks. As a driver
opt-in protect queue operations and (in due course) ethtool
operations with the instance lock and not RTNL lock.
- Support collecting TCP timestamps (data submitted, sent, acked) in
BPF, allowing for transparent (to the application) and lower
overhead tracking of TCP RPC performance.
- Tweak existing networking Rx zero-copy infra to support zero-copy
Rx via io_uring.
- Optimize MPTCP performance in single subflow mode by 29%.
- Enable GRO on packets which went thru XDP CPU redirect (were queued
for processing on a different CPU). Improving TCP stream
performance up to 2x.
- Improve performance of contended connect() by 200% by searching for
an available 4-tuple under RCU rather than a spin lock. Bring an
additional 229% improvement by tweaking hash distribution.
- Avoid unconditionally touching sk_tsflags on RX, improving
performance under UDP flood by as much as 10%.
- Avoid skb_clone() dance in ping_rcv() to improve performance under
ping flood.
- Avoid FIB lookup in netfilter if socket is available, 20% perf win.
- Rework network device creation (in-kernel) API to more clearly
identify network namespaces and their roles. There are up to 4
namespace roles but we used to have just 2 netns pointer arguments,
interpreted differently based on context.
- Use sysfs_break_active_protection() instead of trylock to avoid
deadlocks between unregistering objects and sysfs access.
- Add a new sysctl and sockopt for capping max retransmit timeout in
TCP.
- Support masking port and DSCP in routing rule matches.
- Support dumping IPv4 multicast addresses with RTM_GETMULTICAST.
- Support specifying at what time packet should be sent on AF_XDP
sockets.
- Expose TCP ULP diagnostic info (for TLS and MPTCP) to non-admin
users.
- Add Netlink YAML spec for WiFi (nl80211) and conntrack.
- Introduce EXPORT_IPV6_MOD() and EXPORT_IPV6_MOD_GPL() for symbols
which only need to be exported when IPv6 support is built as a
module.
- Age FDB entries based on Rx not Tx traffic in VxLAN, similar to
normal bridging.
- Allow users to specify source port range for GENEVE tunnels.
- netconsole: allow attaching kernel release, CPU ID and task name to
messages as metadata
Driver API:
- Continue rework / fixing of Energy Efficient Ethernet (EEE) across
the SW layers. Delegate the responsibilities to phylink where
possible. Improve its handling in phylib.
- Support symmetric OR-XOR RSS hashing algorithm.
- Support tracking and preserving IRQ affinity by NAPI itself.
- Support loopback mode speed selection for interface selftests.
Device drivers:
- Remove the IBM LCS driver for s390
- Remove the sb1000 cable modem driver
- Add support for SFP module access over SMBus
- Add MCTP transport driver for MCTP-over-USB
- Enable XDP metadata support in multiple drivers
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- add PCIe TLP Processing Hints (TPH) support for new AMD
platforms
- support dumping RoCE queue state for debug
- opt into instance locking
- Intel (100G, ice, idpf):
- ice: rework MSI-X IRQ management and distribution
- ice: support for E830 devices
- iavf: add support for Rx timestamping
- iavf: opt into instance locking
- nVidia/Mellanox:
- mlx4: use page pool memory allocator for Rx
- mlx5: support for one PTP device per hardware clock
- mlx5: support for 200Gbps per-lane link modes
- mlx5: move IPSec policy check after decryption
- AMD/Solarflare:
- support FW flashing via devlink
- Cisco (enic):
- use page pool memory allocator for Rx
- enable 32, 64 byte CQEs
- get max rx/tx ring size from the device
- Meta (fbnic):
- support flow steering and RSS configuration
- report queue stats
- support TCP segmentation
- support IRQ coalescing
- support ring size configuration
- Marvell/Cavium:
- support AF_XDP
- Wangxun:
- support for PTP clock and timestamping
- Huawei (hibmcge):
- checksum offload
- add more statistics
- Ethernet virtual:
- VirtIO net:
- aggressively suppress Tx completions, improve perf by 96%
with 1 CPU and 55% with 2 CPUs
- expose NAPI to IRQ mapping and persist NAPI settings
- Google (gve):
- support XDP in DQO RDA Queue Format
- opt into instance locking
- Microsoft vNIC:
- support BIG TCP
- Ethernet NICs consumer, and embedded:
- Synopsys (stmmac):
- cleanup Tx and Tx clock setting and other link-focused
cleanups
- enable SGMII and 2500BASEX mode switching for Intel platforms
- support Sophgo SG2044
- Broadcom switches (b53):
- support for BCM53101
- TI:
- iep: add perout configuration support
- icssg: support XDP
- Cadence (macb):
- implement BQL
- Xilinx (axinet):
- support dynamic IRQ moderation and changing coalescing at
runtime
- implement BQL
- report standard stats
- MediaTek:
- support phylink managed EEE
- Intel:
- igc: don't restart the interface on every XDP program change
- RealTek (r8169):
- support reading registers of internal PHYs directly
- increase max jumbo packet size on RTL8125/RTL8126
- Airoha:
- support for RISC-V NPU packet processing unit
- enable scatter-gather and support MTU up to 9kB
- Tehuti (tn40xx):
- support cards with TN4010 MAC and an Aquantia AQR105 PHY
- Ethernet PHYs:
- support for TJA1102S, TJA1121
- dp83tg720: add randomized polling intervals for link detection
- dp83822: support changing the transmit amplitude voltage
- support for LEDs on 88q2xxx
- CAN:
- canxl: support Remote Request Substitution bit access
- flexcan: add S32G2/S32G3 SoC
- WiFi:
- remove cooked monitor support
- strict mode for better AP testing
- basic EPCS support
- OMI RX bandwidth reduction support
- batman-adv: add support for jumbo frames
- WiFi drivers:
- RealTek (rtw88):
- support RTL8814AE and RTL8814AU
- RealTek (rtw89):
- switch using wiphy_lock and wiphy_work
- add BB context to manipulate two PHY as preparation of MLO
- improve BT-coexistence mechanism to play A2DP smoothly
- Intel (iwlwifi):
- add new iwlmld sub-driver for latest HW/FW combinations
- MediaTek (mt76):
- preparation for mt7996 Multi-Link Operation (MLO) support
- Qualcomm/Atheros (ath12k):
- continued work on MLO
- Silabs (wfx):
- Wake-on-WLAN support
- Bluetooth:
- add support for skb TX SND/COMPLETION timestamping
- hci_core: enable buffer flow control for SCO/eSCO
- coredump: log devcd dumps into the monitor
- Bluetooth drivers:
- intel: add support to configure TX power
- nxp: handle bootloader error during cmd5 and cmd7"
* tag 'net-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1681 commits)
unix: fix up for "apparmor: add fine grained af_unix mediation"
mctp: Fix incorrect tx flow invalidation condition in mctp-i2c
net: usb: asix: ax88772: Increase phy_name size
net: phy: Introduce PHY_ID_SIZE — minimum size for PHY ID string
net: libwx: fix Tx L4 checksum
net: libwx: fix Tx descriptor content for some tunnel packets
atm: Fix NULL pointer dereference
net: tn40xx: add pci-id of the aqr105-based Tehuti TN4010 cards
net: tn40xx: prepare tn40xx driver to find phy of the TN9510 card
net: tn40xx: create swnode for mdio and aqr105 phy and add to mdiobus
net: phy: aquantia: add essential functions to aqr105 driver
net: phy: aquantia: search for firmware-name in fwnode
net: phy: aquantia: add probe function to aqr105 for firmware loading
net: phy: Add swnode support to mdiobus_scan
gve: add XDP DROP and PASS support for DQ
gve: update XDP allocation path support RX buffer posting
gve: merge packet buffer size fields
gve: update GQ RX to use buf_size
gve: introduce config-based allocation for XDP
gve: remove xdp_xsk_done and xdp_xsk_wakeup statistics
...
|
||
|
Linus Torvalds
|
ee6740fd34 |
CRC updates for 6.15
Another set of improvements to the kernel's CRC (cyclic redundancy
check) code:
- Rework the CRC64 library functions to be directly optimized, like what
I did last cycle for the CRC32 and CRC-T10DIF library functions.
- Rewrite the x86 PCLMULQDQ-optimized CRC code, and add VPCLMULQDQ
support and acceleration for crc64_be and crc64_nvme.
- Rewrite the riscv Zbc-optimized CRC code, and add acceleration for
crc_t10dif, crc64_be, and crc64_nvme.
- Remove crc_t10dif and crc64_rocksoft from the crypto API, since they
are no longer needed there.
- Rename crc64_rocksoft to crc64_nvme, as the old name was incorrect.
- Add kunit test cases for crc64_nvme and crc7.
- Eliminate redundant functions for calculating the Castagnoli CRC32,
settling on just crc32c().
- Remove unnecessary prompts from some of the CRC kconfig options.
- Further optimize the x86 crc32c code.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCZ+CGGhQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOK3wRAP4tbnzawUmlIHIF0hleoADXehUgAhMt
NZn15mGvyiuwIQEA8W9qvnLdFXZkdxhxAEvDDFjyrRauL6eGtr/GvCx4AQY=
=wmKG
-----END PGP SIGNATURE-----
Merge tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull CRC updates from Eric Biggers:
"Another set of improvements to the kernel's CRC (cyclic redundancy
check) code:
- Rework the CRC64 library functions to be directly optimized, like
what I did last cycle for the CRC32 and CRC-T10DIF library
functions
- Rewrite the x86 PCLMULQDQ-optimized CRC code, and add VPCLMULQDQ
support and acceleration for crc64_be and crc64_nvme
- Rewrite the riscv Zbc-optimized CRC code, and add acceleration for
crc_t10dif, crc64_be, and crc64_nvme
- Remove crc_t10dif and crc64_rocksoft from the crypto API, since
they are no longer needed there
- Rename crc64_rocksoft to crc64_nvme, as the old name was incorrect
- Add kunit test cases for crc64_nvme and crc7
- Eliminate redundant functions for calculating the Castagnoli CRC32,
settling on just crc32c()
- Remove unnecessary prompts from some of the CRC kconfig options
- Further optimize the x86 crc32c code"
* tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (36 commits)
x86/crc: drop the avx10_256 functions and rename avx10_512 to avx512
lib/crc: remove unnecessary prompt for CONFIG_CRC64
lib/crc: remove unnecessary prompt for CONFIG_LIBCRC32C
lib/crc: remove unnecessary prompt for CONFIG_CRC8
lib/crc: remove unnecessary prompt for CONFIG_CRC7
lib/crc: remove unnecessary prompt for CONFIG_CRC4
lib/crc7: unexport crc7_be_syndrome_table
lib/crc_kunit.c: update comment in crc_benchmark()
lib/crc_kunit.c: add test and benchmark for crc7_be()
x86/crc32: optimize tail handling for crc32c short inputs
riscv/crc64: add Zbc optimized CRC64 functions
riscv/crc-t10dif: add Zbc optimized CRC-T10DIF function
riscv/crc32: reimplement the CRC32 functions using new template
riscv/crc: add "template" for Zbc optimized CRC functions
x86/crc: add ANNOTATE_NOENDBR to suppress objtool warnings
x86/crc32: improve crc32c_arch() code generation with clang
x86/crc64: implement crc64_be and crc64_nvme using new template
x86/crc-t10dif: implement crc_t10dif using new template
x86/crc32: implement crc32_le using new template
x86/crc: add "template" for [V]PCLMULQDQ based CRC functions
...
|
||
|
Linus Torvalds
|
edb0e8f6e2 |
ARM:
* Nested virtualization support for VGICv3, giving the nested
hypervisor control of the VGIC hardware when running an L2 VM
* Removal of 'late' nested virtualization feature register masking,
making the supported feature set directly visible to userspace
* Support for emulating FEAT_PMUv3 on Apple silicon, taking advantage
of an IMPLEMENTATION DEFINED trap that covers all PMUv3 registers
* Paravirtual interface for discovering the set of CPU implementations
where a VM may run, addressing a longstanding issue of guest CPU
errata awareness in big-little systems and cross-implementation VM
migration
* Userspace control of the registers responsible for identifying a
particular CPU implementation (MIDR_EL1, REVIDR_EL1, AIDR_EL1),
allowing VMs to be migrated cross-implementation
* pKVM updates, including support for tracking stage-2 page table
allocations in the protected hypervisor in the 'SecPageTable' stat
* Fixes to vPMU, ensuring that userspace updates to the vPMU after
KVM_RUN are reflected into the backing perf events
LoongArch:
* Remove unnecessary header include path
* Assume constant PGD during VM context switch
* Add perf events support for guest VM
RISC-V:
* Disable the kernel perf counter during configure
* KVM selftests improvements for PMU
* Fix warning at the time of KVM module removal
x86:
* Add support for aging of SPTEs without holding mmu_lock. Not taking mmu_lock
allows multiple aging actions to run in parallel, and more importantly avoids
stalling vCPUs. This includes an implementation of per-rmap-entry locking;
aging the gfn is done with only a per-rmap single-bin spinlock taken, whereas
locking an rmap for write requires taking both the per-rmap spinlock and
the mmu_lock.
Note that this decreases slightly the accuracy of accessed-page information,
because changes to the SPTE outside aging might not use atomic operations
even if they could race against a clear of the Accessed bit. This is
deliberate because KVM and mm/ tolerate false positives/negatives for
accessed information, and testing has shown that reducing the latency of
aging is far more beneficial to overall system performance than providing
"perfect" young/old information.
* Defer runtime CPUID updates until KVM emulates a CPUID instruction, to
coalesce updates when multiple pieces of vCPU state are changing, e.g. as
part of a nested transition.
* Fix a variety of nested emulation bugs, and add VMX support for synthesizing
nested VM-Exit on interception (instead of injecting #UD into L2).
* Drop "support" for async page faults for protected guests that do not set
SEND_ALWAYS (i.e. that only want async page faults at CPL3)
* Bring a bit of sanity to x86's VM teardown code, which has accumulated
a lot of cruft over the years. Particularly, destroy vCPUs before
the MMU, despite the latter being a VM-wide operation.
* Add common secure TSC infrastructure for use within SNP and in the
future TDX
* Block KVM_CAP_SYNC_REGS if guest state is protected. It does not make
sense to use the capability if the relevant registers are not
available for reading or writing.
* Don't take kvm->lock when iterating over vCPUs in the suspend notifier to
fix a largely theoretical deadlock.
* Use the vCPU's actual Xen PV clock information when starting the Xen timer,
as the cached state in arch.hv_clock can be stale/bogus.
* Fix a bug where KVM could bleed PVCLOCK_GUEST_STOPPED across different
PV clocks; restrict PVCLOCK_GUEST_STOPPED to kvmclock, as KVM's suspend
notifier only accounts for kvmclock, and there's no evidence that the
flag is actually supported by Xen guests.
* Clean up the per-vCPU "cache" of its reference pvclock, and instead only
track the vCPU's TSC scaling (multipler+shift) metadata (which is moderately
expensive to compute, and rarely changes for modern setups).
* Don't write to the Xen hypercall page on MSR writes that are initiated by
the host (userspace or KVM) to fix a class of bugs where KVM can write to
guest memory at unexpected times, e.g. during vCPU creation if userspace has
set the Xen hypercall MSR index to collide with an MSR that KVM emulates.
* Restrict the Xen hypercall MSR index to the unofficial synthetic range to
reduce the set of possible collisions with MSRs that are emulated by KVM
(collisions can still happen as KVM emulates Hyper-V MSRs, which also reside
in the synthetic range).
* Clean up and optimize KVM's handling of Xen MSR writes and xen_hvm_config.
* Update Xen TSC leaves during CPUID emulation instead of modifying the CPUID
entries when updating PV clocks; there is no guarantee PV clocks will be
updated between TSC frequency changes and CPUID emulation, and guest reads
of the TSC leaves should be rare, i.e. are not a hot path.
x86 (Intel):
* Fix a bug where KVM unnecessarily reads XFD_ERR from hardware and thus
modifies the vCPU's XFD_ERR on a #NM due to CR0.TS=1.
* Pass XFD_ERR as the payload when injecting #NM, as a preparatory step
for upcoming FRED virtualization support.
* Decouple the EPT entry RWX protection bit macros from the EPT Violation
bits, both as a general cleanup and in anticipation of adding support for
emulating Mode-Based Execution Control (MBEC).
* Reject KVM_RUN if userspace manages to gain control and stuff invalid guest
state while KVM is in the middle of emulating nested VM-Enter.
* Add a macro to handle KVM's sanity checks on entry/exit VMCS control pairs
in anticipation of adding sanity checks for secondary exit controls (the
primary field is out of bits).
x86 (AMD):
* Ensure the PSP driver is initialized when both the PSP and KVM modules are
built-in (the initcall framework doesn't handle dependencies).
* Use long-term pins when registering encrypted memory regions, so that the
pages are migrated out of MIGRATE_CMA/ZONE_MOVABLE and don't lead to
excessive fragmentation.
* Add macros and helpers for setting GHCB return/error codes.
* Add support for Idle HLT interception, which elides interception if the vCPU
has a pending, unmasked virtual IRQ when HLT is executed.
* Fix a bug in INVPCID emulation where KVM fails to check for a non-canonical
address.
* Don't attempt VMRUN for SEV-ES+ guests if the vCPU's VMSA is invalid, e.g.
because the vCPU was "destroyed" via SNP's AP Creation hypercall.
* Reject SNP AP Creation if the requested SEV features for the vCPU don't
match the VM's configured set of features.
Selftests:
* Fix again the Intel PMU counters test; add a data load and do CLFLUSH{OPT} on the data
instead of executing code. The theory is that modern Intel CPUs have
learned new code prefetching tricks that bypass the PMU counters.
* Fix a flaw in the Intel PMU counters test where it asserts that an event is
counting correctly without actually knowing what the event counts on the
underlying hardware.
* Fix a variety of flaws, bugs, and false failures/passes dirty_log_test, and
improve its coverage by collecting all dirty entries on each iteration.
* Fix a few minor bugs related to handling of stats FDs.
* Add infrastructure to make vCPU and VM stats FDs available to tests by
default (open the FDs during VM/vCPU creation).
* Relax an assertion on the number of HLT exits in the xAPIC IPI test when
running on a CPU that supports AMD's Idle HLT (which elides interception of
HLT if a virtual IRQ is pending and unmasked).
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmfcTkEUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMnQAf/cPx72hJOdNy4Qrm8M33YLXVRVV00
yEZ8eN8TWdOclr0ltE/w/ELGh/qS4CU8pjURAk0A6lPioU+mdcTn3dPEqMDMVYom
uOQ2lusEHw0UuSnGZSEjvZJsE/Ro2NSAsHIB6PWRqig1ZBPJzyu0frce34pMpeQH
diwriJL9lKPAhBWXnUQ9BKoi1R0P5OLW9ahX4SOWk7cAFg4DLlDE66Nqf6nKqViw
DwEucTiUEg5+a3d93gihdD4JNl+fb3vI2erxrMxjFjkacl0qgqRu3ei3DG0MfdHU
wNcFSG5B1n0OECKxr80lr1Ip1KTVNNij0Ks+w6Gc6lSg9c4PptnNkfLK3A==
=nnCN
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- Nested virtualization support for VGICv3, giving the nested
hypervisor control of the VGIC hardware when running an L2 VM
- Removal of 'late' nested virtualization feature register masking,
making the supported feature set directly visible to userspace
- Support for emulating FEAT_PMUv3 on Apple silicon, taking advantage
of an IMPLEMENTATION DEFINED trap that covers all PMUv3 registers
- Paravirtual interface for discovering the set of CPU
implementations where a VM may run, addressing a longstanding issue
of guest CPU errata awareness in big-little systems and
cross-implementation VM migration
- Userspace control of the registers responsible for identifying a
particular CPU implementation (MIDR_EL1, REVIDR_EL1, AIDR_EL1),
allowing VMs to be migrated cross-implementation
- pKVM updates, including support for tracking stage-2 page table
allocations in the protected hypervisor in the 'SecPageTable' stat
- Fixes to vPMU, ensuring that userspace updates to the vPMU after
KVM_RUN are reflected into the backing perf events
LoongArch:
- Remove unnecessary header include path
- Assume constant PGD during VM context switch
- Add perf events support for guest VM
RISC-V:
- Disable the kernel perf counter during configure
- KVM selftests improvements for PMU
- Fix warning at the time of KVM module removal
x86:
- Add support for aging of SPTEs without holding mmu_lock.
Not taking mmu_lock allows multiple aging actions to run in
parallel, and more importantly avoids stalling vCPUs. This includes
an implementation of per-rmap-entry locking; aging the gfn is done
with only a per-rmap single-bin spinlock taken, whereas locking an
rmap for write requires taking both the per-rmap spinlock and the
mmu_lock.
Note that this decreases slightly the accuracy of accessed-page
information, because changes to the SPTE outside aging might not
use atomic operations even if they could race against a clear of
the Accessed bit.
This is deliberate because KVM and mm/ tolerate false
positives/negatives for accessed information, and testing has shown
that reducing the latency of aging is far more beneficial to
overall system performance than providing "perfect" young/old
information.
- Defer runtime CPUID updates until KVM emulates a CPUID instruction,
to coalesce updates when multiple pieces of vCPU state are
changing, e.g. as part of a nested transition
- Fix a variety of nested emulation bugs, and add VMX support for
synthesizing nested VM-Exit on interception (instead of injecting
#UD into L2)
- Drop "support" for async page faults for protected guests that do
not set SEND_ALWAYS (i.e. that only want async page faults at CPL3)
- Bring a bit of sanity to x86's VM teardown code, which has
accumulated a lot of cruft over the years. Particularly, destroy
vCPUs before the MMU, despite the latter being a VM-wide operation
- Add common secure TSC infrastructure for use within SNP and in the
future TDX
- Block KVM_CAP_SYNC_REGS if guest state is protected. It does not
make sense to use the capability if the relevant registers are not
available for reading or writing
- Don't take kvm->lock when iterating over vCPUs in the suspend
notifier to fix a largely theoretical deadlock
- Use the vCPU's actual Xen PV clock information when starting the
Xen timer, as the cached state in arch.hv_clock can be stale/bogus
- Fix a bug where KVM could bleed PVCLOCK_GUEST_STOPPED across
different PV clocks; restrict PVCLOCK_GUEST_STOPPED to kvmclock, as
KVM's suspend notifier only accounts for kvmclock, and there's no
evidence that the flag is actually supported by Xen guests
- Clean up the per-vCPU "cache" of its reference pvclock, and instead
only track the vCPU's TSC scaling (multipler+shift) metadata (which
is moderately expensive to compute, and rarely changes for modern
setups)
- Don't write to the Xen hypercall page on MSR writes that are
initiated by the host (userspace or KVM) to fix a class of bugs
where KVM can write to guest memory at unexpected times, e.g.
during vCPU creation if userspace has set the Xen hypercall MSR
index to collide with an MSR that KVM emulates
- Restrict the Xen hypercall MSR index to the unofficial synthetic
range to reduce the set of possible collisions with MSRs that are
emulated by KVM (collisions can still happen as KVM emulates
Hyper-V MSRs, which also reside in the synthetic range)
- Clean up and optimize KVM's handling of Xen MSR writes and
xen_hvm_config
- Update Xen TSC leaves during CPUID emulation instead of modifying
the CPUID entries when updating PV clocks; there is no guarantee PV
clocks will be updated between TSC frequency changes and CPUID
emulation, and guest reads of the TSC leaves should be rare, i.e.
are not a hot path
x86 (Intel):
- Fix a bug where KVM unnecessarily reads XFD_ERR from hardware and
thus modifies the vCPU's XFD_ERR on a #NM due to CR0.TS=1
- Pass XFD_ERR as the payload when injecting #NM, as a preparatory
step for upcoming FRED virtualization support
- Decouple the EPT entry RWX protection bit macros from the EPT
Violation bits, both as a general cleanup and in anticipation of
adding support for emulating Mode-Based Execution Control (MBEC)
- Reject KVM_RUN if userspace manages to gain control and stuff
invalid guest state while KVM is in the middle of emulating nested
VM-Enter
- Add a macro to handle KVM's sanity checks on entry/exit VMCS
control pairs in anticipation of adding sanity checks for secondary
exit controls (the primary field is out of bits)
x86 (AMD):
- Ensure the PSP driver is initialized when both the PSP and KVM
modules are built-in (the initcall framework doesn't handle
dependencies)
- Use long-term pins when registering encrypted memory regions, so
that the pages are migrated out of MIGRATE_CMA/ZONE_MOVABLE and
don't lead to excessive fragmentation
- Add macros and helpers for setting GHCB return/error codes
- Add support for Idle HLT interception, which elides interception if
the vCPU has a pending, unmasked virtual IRQ when HLT is executed
- Fix a bug in INVPCID emulation where KVM fails to check for a
non-canonical address
- Don't attempt VMRUN for SEV-ES+ guests if the vCPU's VMSA is
invalid, e.g. because the vCPU was "destroyed" via SNP's AP
Creation hypercall
- Reject SNP AP Creation if the requested SEV features for the vCPU
don't match the VM's configured set of features
Selftests:
- Fix again the Intel PMU counters test; add a data load and do
CLFLUSH{OPT} on the data instead of executing code. The theory is
that modern Intel CPUs have learned new code prefetching tricks
that bypass the PMU counters
- Fix a flaw in the Intel PMU counters test where it asserts that an
event is counting correctly without actually knowing what the event
counts on the underlying hardware
- Fix a variety of flaws, bugs, and false failures/passes
dirty_log_test, and improve its coverage by collecting all dirty
entries on each iteration
- Fix a few minor bugs related to handling of stats FDs
- Add infrastructure to make vCPU and VM stats FDs available to tests
by default (open the FDs during VM/vCPU creation)
- Relax an assertion on the number of HLT exits in the xAPIC IPI test
when running on a CPU that supports AMD's Idle HLT (which elides
interception of HLT if a virtual IRQ is pending and unmasked)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (216 commits)
RISC-V: KVM: Optimize comments in kvm_riscv_vcpu_isa_disable_allowed
RISC-V: KVM: Teardown riscv specific bits after kvm_exit
LoongArch: KVM: Register perf callbacks for guest
LoongArch: KVM: Implement arch-specific functions for guest perf
LoongArch: KVM: Add stub for kvm_arch_vcpu_preempted_in_kernel()
LoongArch: KVM: Remove PGD saving during VM context switch
LoongArch: KVM: Remove unnecessary header include path
KVM: arm64: Tear down vGIC on failed vCPU creation
KVM: arm64: PMU: Reload when resetting
KVM: arm64: PMU: Reload when user modifies registers
KVM: arm64: PMU: Fix SET_ONE_REG for vPMC regs
KVM: arm64: PMU: Assume PMU presence in pmu-emul.c
KVM: arm64: PMU: Set raw values from user to PM{C,I}NTEN{SET,CLR}, PMOVS{SET,CLR}
KVM: arm64: Create each pKVM hyp vcpu after its corresponding host vcpu
KVM: arm64: Factor out pKVM hyp vcpu creation to separate function
KVM: arm64: Initialize HCRX_EL2 traps in pKVM
KVM: arm64: Factor out setting HCRX_EL2 traps into separate function
KVM: x86: block KVM_CAP_SYNC_REGS if guest state is protected
KVM: x86: Add infrastructure for secure TSC
KVM: x86: Push down setting vcpu.arch.user_set_tsc
...
|
||
|
Linus Torvalds
|
2d09a9449e |
arm64 updates for 6.15:
Perf and PMUs:
- Support for the "Rainier" CPU PMU from Arm
- Preparatory driver changes and cleanups that pave the way for BRBE
support
- Support for partial virtualisation of the Apple-M1 PMU
- Support for the second event filter in Arm CSPMU designs
- Minor fixes and cleanups (CMN and DWC PMUs)
- Enable EL2 requirements for FEAT_PMUv3p9
Power, CPU topology:
- Support for AMUv1-based average CPU frequency
- Run-time SMT control wired up for arm64 (CONFIG_HOTPLUG_SMT). It adds
a generic topology_is_primary_thread() function overridden by x86 and
powerpc
New(ish) features:
- MOPS (memcpy/memset) support for the uaccess routines
Security/confidential compute:
- Fix the DMA address for devices used in Realms with Arm CCA. The
CCA architecture uses the address bit to differentiate between shared
and private addresses
- Spectre-BHB: assume CPUs Linux doesn't know about vulnerable by
default
Memory management clean-ups:
- Drop the P*D_TABLE_BIT definition in preparation for 128-bit PTEs
- Some minor page table accessor clean-ups
- PIE/POE (permission indirection/overlay) helpers clean-up
Kselftests:
- MTE: skip hugetlb tests if MTE is not supported on such mappings and
user correct naming for sync/async tag checking modes
Miscellaneous:
- Add a PKEY_UNRESTRICTED definition as 0 to uapi (toolchain people
request)
- Sysreg updates for new register fields
- CPU type info for some Qualcomm Kryo cores
-----BEGIN PGP SIGNATURE-----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=Kc9c
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"Nothing major this time around.
Apart from the usual perf/PMU updates, some page table cleanups, the
notable features are average CPU frequency based on the AMUv1
counters, CONFIG_HOTPLUG_SMT and MOPS instructions (memcpy/memset) in
the uaccess routines.
Perf and PMUs:
- Support for the 'Rainier' CPU PMU from Arm
- Preparatory driver changes and cleanups that pave the way for BRBE
support
- Support for partial virtualisation of the Apple-M1 PMU
- Support for the second event filter in Arm CSPMU designs
- Minor fixes and cleanups (CMN and DWC PMUs)
- Enable EL2 requirements for FEAT_PMUv3p9
Power, CPU topology:
- Support for AMUv1-based average CPU frequency
- Run-time SMT control wired up for arm64 (CONFIG_HOTPLUG_SMT). It
adds a generic topology_is_primary_thread() function overridden by
x86 and powerpc
New(ish) features:
- MOPS (memcpy/memset) support for the uaccess routines
Security/confidential compute:
- Fix the DMA address for devices used in Realms with Arm CCA. The
CCA architecture uses the address bit to differentiate between
shared and private addresses
- Spectre-BHB: assume CPUs Linux doesn't know about vulnerable by
default
Memory management clean-ups:
- Drop the P*D_TABLE_BIT definition in preparation for 128-bit PTEs
- Some minor page table accessor clean-ups
- PIE/POE (permission indirection/overlay) helpers clean-up
Kselftests:
- MTE: skip hugetlb tests if MTE is not supported on such mappings
and user correct naming for sync/async tag checking modes
Miscellaneous:
- Add a PKEY_UNRESTRICTED definition as 0 to uapi (toolchain people
request)
- Sysreg updates for new register fields
- CPU type info for some Qualcomm Kryo cores"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (72 commits)
arm64: mm: Don't use %pK through printk
perf/arm_cspmu: Fix missing io.h include
arm64: errata: Add newer ARM cores to the spectre_bhb_loop_affected() lists
arm64: cputype: Add MIDR_CORTEX_A76AE
arm64: errata: Add KRYO 2XX/3XX/4XX silver cores to Spectre BHB safe list
arm64: errata: Assume that unknown CPUs _are_ vulnerable to Spectre BHB
arm64: errata: Add QCOM_KRYO_4XX_GOLD to the spectre_bhb_k24_list
arm64/sysreg: Enforce whole word match for open/close tokens
arm64/sysreg: Fix unbalanced closing block
arm64: Kconfig: Enable HOTPLUG_SMT
arm64: topology: Support SMT control on ACPI based system
arch_topology: Support SMT control for OF based system
cpu/SMT: Provide a default topology_is_primary_thread()
arm64/mm: Define PTDESC_ORDER
perf/arm_cspmu: Add PMEVFILT2R support
perf/arm_cspmu: Generalise event filtering
perf/arm_cspmu: Move register definitons to header
arm64/kernel: Always use level 2 or higher for early mappings
arm64/mm: Drop PXD_TABLE_BIT
arm64/mm: Check pmd_table() in pmd_trans_huge()
...
|
||
|
Linus Torvalds
|
317a76a996 |
Updates for the VDSO infrastructure:
- Consolidate the VDSO storage
The VDSO data storage and data layout has been largely architecture
specific for historical reasons. That increases the maintenance effort
and causes inconsistencies over and over.
There is no real technical reason for architecture specific layouts and
implementations. The architecture specific details can easily be
integrated into a generic layout, which also reduces the amount of
duplicated code for managing the mappings.
Convert all architectures over to a unified layout and common mapping
infrastructure. This splits the VDSO data layout into subsystem
specific blocks, timekeeping, random and architecture parts, which
provides a better structure and allows to improve and update the
functionalities without conflict and interaction.
- Rework the timekeeping data storage
The current implementation is designed for exposing system timekeeping
accessors, which was good enough at the time when it was designed.
PTP and Time Sensitive Networking (TSN) change that as there are
requirements to expose independent PTP clocks, which are not related to
system timekeeping.
Replace the monolithic data storage by a structured layout, which
allows to add support for independent PTP clocks on top while reusing
both the data structures and the time accessor implementations.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmfgSWUTHHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYoYGED/0f/M8YyacAyErDYW4ufW+zh2sUidSf
GVlK0Jn5BMljOoye+y2XfTxuvvXxEDjJNYiJm2uKGPdV29tjNXreGK39XyNqXPu5
jwR4f/IN/QVSM2nCO6jyydMz8ympJ2k6M4RewwmxXBL2KsUzzJWSKTgRNqM5Tdjs
1RhJMjkQVTiiSYerBpHXYCeZLM7/VEfZ120uuzVAYPXo0/R6zuyF7IBgIao9hbfO
IQeCMLLfpDQHQhwquTA8ZbWqQusiEoSYHT+kTDa3eXDDbE/2UklAUs9gaatI979x
73zs0Yqxyx2iIGaghACWOAbKdcBWBeCYDw5fFwYVKn4VMQi1+wcxbtOYL767jp9o
vfkLXGilXcVkvDjv4fH+e1NoJXXBxq1Ug1silKdOeJzenQF8Q1i3tavkWUVCNfwH
qyOIM72NiCEWbYBDcz0lwBxEAyO4o0E6NP1bDc4y50VedEYIbXwSh0QGrdev1abn
rjY9vsuUR9oznmZ6BRPPxMTY87gOSHoKvqydgSZUACEgLV9346f5qZf341OReYai
MXUmXOM4+LdyaM1+Mec8ppvjMbLw+736NZyZtT2InusEBE+Ddp25L3hYiWnklJu8
2uwv0AoyrwaJ8y6ADOX4thcLZq0gND0Z/Ayz/XvpeI30eftsGUCt5KOVlqwfwOkI
4EQKvk2fAixPxg==
=rwei
-----END PGP SIGNATURE-----
Merge tag 'timers-vdso-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull VDSO infrastructure updates from Thomas Gleixner:
- Consolidate the VDSO storage
The VDSO data storage and data layout has been largely architecture
specific for historical reasons. That increases the maintenance
effort and causes inconsistencies over and over.
There is no real technical reason for architecture specific layouts
and implementations. The architecture specific details can easily be
integrated into a generic layout, which also reduces the amount of
duplicated code for managing the mappings.
Convert all architectures over to a unified layout and common mapping
infrastructure. This splits the VDSO data layout into subsystem
specific blocks, timekeeping, random and architecture parts, which
provides a better structure and allows to improve and update the
functionalities without conflict and interaction.
- Rework the timekeeping data storage
The current implementation is designed for exposing system
timekeeping accessors, which was good enough at the time when it was
designed.
PTP and Time Sensitive Networking (TSN) change that as there are
requirements to expose independent PTP clocks, which are not related
to system timekeeping.
Replace the monolithic data storage by a structured layout, which
allows to add support for independent PTP clocks on top while reusing
both the data structures and the time accessor implementations.
* tag 'timers-vdso-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (55 commits)
sparc/vdso: Always reject undefined references during linking
x86/vdso: Always reject undefined references during linking
vdso: Rework struct vdso_time_data and introduce struct vdso_clock
vdso: Move architecture related data before basetime data
powerpc/vdso: Prepare introduction of struct vdso_clock
arm64/vdso: Prepare introduction of struct vdso_clock
x86/vdso: Prepare introduction of struct vdso_clock
time/namespace: Prepare introduction of struct vdso_clock
vdso/namespace: Rename timens_setup_vdso_data() to reflect new vdso_clock struct
vdso/vsyscall: Prepare introduction of struct vdso_clock
vdso/gettimeofday: Prepare helper functions for introduction of struct vdso_clock
vdso/gettimeofday: Prepare do_coarse_timens() for introduction of struct vdso_clock
vdso/gettimeofday: Prepare do_coarse() for introduction of struct vdso_clock
vdso/gettimeofday: Prepare do_hres_timens() for introduction of struct vdso_clock
vdso/gettimeofday: Prepare do_hres() for introduction of struct vdso_clock
vdso/gettimeofday: Prepare introduction of struct vdso_clock
vdso/helpers: Prepare introduction of struct vdso_clock
vdso/datapage: Define vdso_clock to prepare for multiple PTP clocks
vdso: Make vdso_time_data cacheline aligned
arm64: Make asm/cache.h compatible with vDSO
...
|
||
|
Linus Torvalds
|
a50b4fe095 |
A treewide hrtimer timer cleanup
hrtimers are initialized with hrtimer_init() and a subsequent store to the callback pointer. This turned out to be suboptimal for the upcoming Rust integration and is obviously a silly implementation to begin with. This cleanup replaces the hrtimer_init(T); T->function = cb; sequence with hrtimer_setup(T, cb); The conversion was done with Coccinelle and a few manual fixups. Once the conversion has completely landed in mainline, hrtimer_init() will be removed and the hrtimer::function becomes a private member. -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmff5jQTHHRnbHhAbGlu dXRyb25peC5kZQAKCRCmGPVMDXSYoVvRD/wKtuwmiA66NJFgXC0qVq82A6fO3bY8 GBdbfysDJIbqGu5PTcULTbJ8qkqv3jeLUv6CcXvS4sZ7y/uJQl2lzf8yrD/0bbwc rLI6sHiPSZmK93kNVN4X5H7kvt7cE/DYC9nnEOgK3BY5FgKc4n9887d4aVBhL8Lv ODwVXvZ+xi351YCj7qRyPU24zt/p4tkkT1o2k4a0HBluqLI0D+V20fke9IERUL8r d1uWKlcn0TqYDesE8HXKIhbst3gx52rMJrXBJDHwFmG6v8Pj1fkTXCVpPo8QcBz8 OTVkpomN9f/Tx4+GZwhZOF86LhLL3OhxD6pT7JhFCXdmSGv+Ez8uyk1YZysM/XpV Juy/1yAcBpDIDkmhMFGdAAn48Nn9Fotty0r4je60zSEp1d/4QMXcFme29qr2JTUE iWnQ/HD6DxUjVHqy7CYvvo26Xegg1C7qgyOVt4PYZwAM1VKF5P3kzYTb4SAdxtop Tpji1sfW9QV08jqMNo6XntD32DSP9S2HqjO9LwBw700jnx2jjJ35fcJs6iodMOUn gckIZLMn3L0OoglPdyA5O7SNTbKE7aFiRKdnT/cJtR3Fa39Qu27CwC5gfiyuie9I Q+LG8GLuYSBHXAR+PBK4GWlzJ7Dn8k3eqmbnLeKpRMsU6ZzcttgA64xhaviN2wN0 iJbvLJeisXr3GA== =bYAX -----END PGP SIGNATURE----- Merge tag 'timers-cleanups-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer cleanups from Thomas Gleixner: "A treewide hrtimer timer cleanup hrtimers are initialized with hrtimer_init() and a subsequent store to the callback pointer. This turned out to be suboptimal for the upcoming Rust integration and is obviously a silly implementation to begin with. This cleanup replaces the hrtimer_init(T); T->function = cb; sequence with hrtimer_setup(T, cb); The conversion was done with Coccinelle and a few manual fixups. Once the conversion has completely landed in mainline, hrtimer_init() will be removed and the hrtimer::function becomes a private member" * tag 'timers-cleanups-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (100 commits) wifi: rt2x00: Switch to use hrtimer_update_function() io_uring: Use helper function hrtimer_update_function() serial: xilinx_uartps: Use helper function hrtimer_update_function() ASoC: fsl: imx-pcm-fiq: Switch to use hrtimer_setup() RDMA: Switch to use hrtimer_setup() virtio: mem: Switch to use hrtimer_setup() drm/vmwgfx: Switch to use hrtimer_setup() drm/xe/oa: Switch to use hrtimer_setup() drm/vkms: Switch to use hrtimer_setup() drm/msm: Switch to use hrtimer_setup() drm/i915/request: Switch to use hrtimer_setup() drm/i915/uncore: Switch to use hrtimer_setup() drm/i915/pmu: Switch to use hrtimer_setup() drm/i915/perf: Switch to use hrtimer_setup() drm/i915/gvt: Switch to use hrtimer_setup() drm/i915/huc: Switch to use hrtimer_setup() drm/amdgpu: Switch to use hrtimer_setup() stm class: heartbeat: Switch to use hrtimer_setup() i2c: Switch to use hrtimer_setup() iio: Switch to use hrtimer_setup() ... |
||
|
Linus Torvalds
|
327ecdbc0f |
Performance events updates for v6.15:
Core:
- Move perf_event sysctls into kernel/events/ (Joel Granados)
- Use POLLHUP for pinned events in error (Namhyung Kim)
- Avoid the read if the count is already updated (Peter Zijlstra)
- Allow the EPOLLRDNORM flag for poll (Tao Chen)
- locking/percpu-rwsem: Add guard support (Peter Zijlstra)
[ NOTE: this got (mis-)merged into the perf tree due to related work. ]
perf_pmu_unregister() related improvements: (Peter Zijlstra)
- Simplify the perf_event_alloc() error path
- Simplify the perf_pmu_register() error path
- Simplify perf_pmu_register()
- Simplify perf_init_event()
- Simplify perf_event_alloc()
- Merge struct pmu::pmu_disable_count into struct perf_cpu_pmu_context::pmu_disable_count
- Add this_cpc() helper
- Introduce perf_free_addr_filters()
- Robustify perf_event_free_bpf_prog()
- Simplify the perf_mmap() control flow
- Further simplify perf_mmap()
- Remove retry loop from perf_mmap()
- Lift event->mmap_mutex in perf_mmap()
- Detach 'struct perf_cpu_pmu_context' and 'struct pmu' lifetimes
- Fix perf_mmap() failure path
Uprobes:
- Harden x86 uretprobe syscall trampoline check (Jiri Olsa)
- Remove redundant spinlock in uprobe_deny_signal() (Liao Chang)
- Remove the spinlock within handle_singlestep() (Liao Chang)
x86 Intel PMU enhancements:
- Support PEBS counters snapshotting (Kan Liang)
- Fix intel_pmu_read_event() (Kan Liang)
- Extend per event callchain limit to branch stack (Kan Liang)
- Fix system-wide LBR profiling (Kan Liang)
- Allocate bts_ctx only if necessary (Li RongQing)
- Apply static call for drain_pebs (Peter Zijlstra)
x86 AMD PMU enhancements: (Ravi Bangoria)
- Remove pointless sample period check
- Fix ->config to sample period calculation for OP PMU
- Fix perf_ibs_op.cnt_mask for CurCnt
- Don't allow freq mode event creation through ->config interface
- Add PMU specific minimum period
- Add ->check_period() callback
- Ceil sample_period to min_period
- Add support for OP Load Latency Filtering
- Update DTLB/PageSize decode logic
Hardware breakpoints:
- Return EOPNOTSUPP for unsupported breakpoint type (Saket Kumar Bhaskar)
Hardlockup detector improvements: (Li Huafei)
- perf_event memory leak
- Warn if watchdog_ev is leaked
Fixes and cleanups:
- Misc fixes and cleanups (Andy Shevchenko, Kan Liang, Peter Zijlstra,
Ravi Bangoria, Thorsten Blum, XieLudan)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=iPmA
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull performance events updates from Ingo Molnar:
"Core:
- Move perf_event sysctls into kernel/events/ (Joel Granados)
- Use POLLHUP for pinned events in error (Namhyung Kim)
- Avoid the read if the count is already updated (Peter Zijlstra)
- Allow the EPOLLRDNORM flag for poll (Tao Chen)
- locking/percpu-rwsem: Add guard support [ NOTE: this got
(mis-)merged into the perf tree due to related work ] (Peter
Zijlstra)
perf_pmu_unregister() related improvements: (Peter Zijlstra)
- Simplify the perf_event_alloc() error path
- Simplify the perf_pmu_register() error path
- Simplify perf_pmu_register()
- Simplify perf_init_event()
- Simplify perf_event_alloc()
- Merge struct pmu::pmu_disable_count into struct
perf_cpu_pmu_context::pmu_disable_count
- Add this_cpc() helper
- Introduce perf_free_addr_filters()
- Robustify perf_event_free_bpf_prog()
- Simplify the perf_mmap() control flow
- Further simplify perf_mmap()
- Remove retry loop from perf_mmap()
- Lift event->mmap_mutex in perf_mmap()
- Detach 'struct perf_cpu_pmu_context' and 'struct pmu' lifetimes
- Fix perf_mmap() failure path
Uprobes:
- Harden x86 uretprobe syscall trampoline check (Jiri Olsa)
- Remove redundant spinlock in uprobe_deny_signal() (Liao Chang)
- Remove the spinlock within handle_singlestep() (Liao Chang)
x86 Intel PMU enhancements:
- Support PEBS counters snapshotting (Kan Liang)
- Fix intel_pmu_read_event() (Kan Liang)
- Extend per event callchain limit to branch stack (Kan Liang)
- Fix system-wide LBR profiling (Kan Liang)
- Allocate bts_ctx only if necessary (Li RongQing)
- Apply static call for drain_pebs (Peter Zijlstra)
x86 AMD PMU enhancements: (Ravi Bangoria)
- Remove pointless sample period check
- Fix ->config to sample period calculation for OP PMU
- Fix perf_ibs_op.cnt_mask for CurCnt
- Don't allow freq mode event creation through ->config interface
- Add PMU specific minimum period
- Add ->check_period() callback
- Ceil sample_period to min_period
- Add support for OP Load Latency Filtering
- Update DTLB/PageSize decode logic
Hardware breakpoints:
- Return EOPNOTSUPP for unsupported breakpoint type (Saket Kumar
Bhaskar)
Hardlockup detector improvements: (Li Huafei)
- perf_event memory leak
- Warn if watchdog_ev is leaked
Fixes and cleanups:
- Misc fixes and cleanups (Andy Shevchenko, Kan Liang, Peter
Zijlstra, Ravi Bangoria, Thorsten Blum, XieLudan)"
* tag 'perf-core-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (55 commits)
perf: Fix __percpu annotation
perf: Clean up pmu specific data
perf/x86: Remove swap_task_ctx()
perf/x86/lbr: Fix shorter LBRs call stacks for the system-wide mode
perf: Supply task information to sched_task()
perf: attach/detach PMU specific data
locking/percpu-rwsem: Add guard support
perf: Save PMU specific data in task_struct
perf: Extend per event callchain limit to branch stack
perf/ring_buffer: Allow the EPOLLRDNORM flag for poll
perf/core: Use POLLHUP for pinned events in error
perf/core: Use sysfs_emit() instead of scnprintf()
perf/core: Remove optional 'size' arguments from strscpy() calls
perf/x86/intel/bts: Check if bts_ctx is allocated when calling BTS functions
uprobes/x86: Harden uretprobe syscall trampoline check
watchdog/hardlockup/perf: Warn if watchdog_ev is leaked
watchdog/hardlockup/perf: Fix perf_event memory leak
perf/x86: Annotate struct bts_buffer::buf with __counted_by()
perf/core: Clean up perf_try_init_event()
perf/core: Fix perf_mmap() failure path
...
|
||
|
Linus Torvalds
|
32b22538be |
Scheduler updates for v6.15:
[ Merge note, these two commits are identical:
-
|
||
|
Linus Torvalds
|
2f2d529458 |
bitmap changes for 6.15
This includes: - cpumask_next_wrap() rework from me; - GENMASK() simplification from I Hsin; - rust bindings for cpumasks from Viresh and me; - scattered cleanups from Andy, Tamir, Vincent, Ignacio and Joel. -----BEGIN PGP SIGNATURE----- iQGzBAABCgAdFiEEi8GdvG6xMhdgpu/4sUSA/TofvsgFAmfhicUACgkQsUSA/Tof vsiT1Av/TFpTFPcfb0/U6zTjhphqSkhCqBN4JcT+Qh1pyFN3Q8xh7FIRjqm6PoWb wypQTrsOuS1UImfxj2PkHPiagDHz3LBWRJ1WCBZPF3FgZaFdOtVDObn91APaX4Jz K7B2eghnDLk74+eV3aBLVCPgdFPm4Og+3W2J9loWDHYNBrlgQX/3T8gZzJcIzDxk 8jDiy84cGQweW3K6VDr7WGb/gDBTNXKByFig4+rzuW8X/VcUB1wZi1lHqTL3yBMm hXGsa8/VFLVKpRhZxx7PeTiXF+Wp4Tu7iyCuLVK9F9P9pY4GBZ9KV69yaeHLwlwF P4eA3Lj1KvtwmZYDT19lB8V0El7nZzcTHtmSgII8JEniWvuVQjjARicIqFqh6zmX QaLOt/gfGT/tr9nPzsFMgQxHV0ocibqWmM0gZyfEDsqIX0ynSh1fbMf52PrbBBSX aOaVV55HWIjHzLPzqvVee8JMaCwn4hNDrVaWItedQzZkf8aXKLk/GUWYaaEwQ8yY N7D3sXbT =Bm5k -----END PGP SIGNATURE----- Merge tag 'bitmap-for-6.15' of https://github.com/norov/linux Pull bitmap updates from Yury Norov: - cpumask_next_wrap() rework (me) - GENMASK() simplification (I Hsin) - rust bindings for cpumasks (Viresh and me) - scattered cleanups (Andy, Tamir, Vincent, Ignacio and Joel) * tag 'bitmap-for-6.15' of https://github.com/norov/linux: (22 commits) cpumask: align text in comment riscv: fix test_and_{set,clear}_bit ordering documentation treewide: fix typo 'unsigned __init128' -> 'unsigned __int128' MAINTAINERS: add rust bindings entry for bitmap API rust: Add cpumask helpers uapi: Revert "bitops: avoid integer overflow in GENMASK(_ULL)" cpumask: drop cpumask_next_wrap_old() PCI: hv: Switch hv_compose_multi_msi_req_get_cpu() to using cpumask_next_wrap() scsi: lpfc: rework lpfc_next_{online,present}_cpu() scsi: lpfc: switch lpfc_irq_rebalance() to using cpumask_next_wrap() s390: switch stop_machine_yield() to using cpumask_next_wrap() padata: switch padata_find_next() to using cpumask_next_wrap() cpumask: use cpumask_next_wrap() where appropriate cpumask: re-introduce cpumask_next{,_and}_wrap() cpumask: deprecate cpumask_next_wrap() powerpc/xmon: simplify xmon_batch_next_cpu() ibmvnic: simplify ibmvnic_set_queue_affinity() virtio_net: simplify virtnet_set_affinity() objpool: rework objpool_pop() cpumask: add for_each_{possible,online}_cpu_wrap ... |
||
|
Linus Torvalds
|
11c2b2e332 |
seccomp updates for v6.15-rc1
- avoid the lock trip seccomp_filter_release in common case (Mateusz Guzik) - remove unused 'sd' argument through-out (Oleg Nesterov) - selftests/seccomp: Add hard-coded __NR_uretprobe for x86_64 -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRSPkdeREjth1dHnSE2KwveOeQkuwUCZ9hJKgAKCRA2KwveOeQk u3UDAQCUPSJ+iNGEsh9ErHJZWmg+LQJ999fOVrWWz+onjXFoQgD/cEHyLtSnz1Oa RbdGEqkBkRTXgOdkcIW5pJ4lBtfIpQQ= =z/8H -----END PGP SIGNATURE----- Merge tag 'seccomp-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull seccomp updates from Kees Cook: - avoid the lock trip seccomp_filter_release in common case (Mateusz Guzik) - remove unused 'sd' argument through-out (Oleg Nesterov) - selftests/seccomp: Add hard-coded __NR_uretprobe for x86_64 * tag 'seccomp-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: seccomp: avoid the lock trip seccomp_filter_release in common case seccomp: remove the 'sd' argument from __seccomp_filter() seccomp: remove the 'sd' argument from __secure_computing() seccomp: fix the __secure_computing() stub for !HAVE_ARCH_SECCOMP_FILTER seccomp/mips: change syscall_trace_enter() to use secure_computing() selftests/seccomp: Add hard-coded __NR_uretprobe for x86_64 |
||
|
Linus Torvalds
|
4f773fcbdb |
execve updates for v6.15-rc1
- elf: Define and use note name macros (Akihiko Odaki) - elf: add remaining SHF_ flag macros (Timur Tabi) - binfmt: Remove loader from linux_binprm struct (Yonatan Goldschmidt) - binfmt_elf_fdpic: fix variable set but not used warning (sunliming) -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRSPkdeREjth1dHnSE2KwveOeQkuwUCZ9hJxQAKCRA2KwveOeQk uwhAAP9WXP77FCfAvJkmOfDI5FSa6g2WH/BnUOtZW63lSoXnTAEAuttg8W1IKcl/ Db+R/RLS3QqrU+ib5xWBeA6ZvxZXCwA= =Svn4 -----END PGP SIGNATURE----- Merge tag 'execve-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull execve updates from Kees Cook: - elf: Define and use note name macros (Akihiko Odaki) - elf: add remaining SHF_ flag macros (Timur Tabi) - binfmt: Remove loader from linux_binprm struct (Yonatan Goldschmidt) - binfmt_elf_fdpic: fix variable set but not used warning (sunliming) * tag 'execve-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: binfmt_elf_fdpic: fix variable set but not used warning elf: add remaining SHF_ flag macros binfmt: Remove loader from linux_binprm struct crash: Remove KEXEC_CORE_NOTE_NAME s390/crash: Use note name macros crash: Use note name macros powerpc/crash: Use note name macros binfmt_elf: Use note name macros elf: Define note name macros |
||
|
Linus Torvalds
|
aaca83f7b1 |
vfs-6.15-rc1.sysv
-----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZ90rswAKCRCRxhvAZXjc ogkpAQD7/kR7QiOQTdDztDtAavZELOE3p4pUZfAcg8XFfH8QKQD/cgDpxgBbyvSQ VBInBrv1vPeSvlPWvFkyqT/n8eiR9AQ= =KQVR -----END PGP SIGNATURE----- Merge tag 'vfs-6.15-rc1.sysv' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs Pull vfs sysv removal from Christian Brauner: "This removes the sysv filesystem. We've discussed this various times. It's time to try" * tag 'vfs-6.15-rc1.sysv' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: sysv: Remove the filesystem |
||
|
Linus Torvalds
|
fd101da676 |
vfs-6.15-rc1.mount
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZ90qAwAKCRCRxhvAZXjc
on7lAP0akpIsJMWREg9tLwTNTySI1b82uKec0EAgM6T7n/PYhAD/T4zoY8UYU0Pr
qCxwTXHUVT6bkNhjREBkfqq9OkPP8w8=
=GxeN
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.15-rc1.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs mount updates from Christian Brauner:
- Mount notifications
The day has come where we finally provide a new api to listen for
mount topology changes outside of /proc/<pid>/mountinfo. A mount
namespace file descriptor can be supplied and registered with
fanotify to listen for mount topology changes.
Currently notifications for mount, umount and moving mounts are
generated. The generated notification record contains the unique
mount id of the mount.
The listmount() and statmount() api can be used to query detailed
information about the mount using the received unique mount id.
This allows userspace to figure out exactly how the mount topology
changed without having to generating diffs of /proc/<pid>/mountinfo
in userspace.
- Support O_PATH file descriptors with FSCONFIG_SET_FD in the new mount
api
- Support detached mounts in overlayfs
Since last cycle we support specifying overlayfs layers via file
descriptors. However, we don't allow detached mounts which means
userspace cannot user file descriptors received via
open_tree(OPEN_TREE_CLONE) and fsmount() directly. They have to
attach them to a mount namespace via move_mount() first.
This is cumbersome and means they have to undo mounts via umount().
Allow them to directly use detached mounts.
- Allow to retrieve idmappings with statmount
Currently it isn't possible to figure out what idmapping has been
attached to an idmapped mount. Add an extension to statmount() which
allows to read the idmapping from the mount.
- Allow creating idmapped mounts from mounts that are already idmapped
So far it isn't possible to allow the creation of idmapped mounts
from already idmapped mounts as this has significant lifetime
implications. Make the creation of idmapped mounts atomic by allow to
pass struct mount_attr together with the open_tree_attr() system call
allowing to solve these issues without complicating VFS lookup in any
way.
The system call has in general the benefit that creating a detached
mount and applying mount attributes to it becomes an atomic operation
for userspace.
- Add a way to query statmount() for supported options
Allow userspace to query which mount information can be retrieved
through statmount().
- Allow superblock owners to force unmount
* tag 'vfs-6.15-rc1.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (21 commits)
umount: Allow superblock owners to force umount
selftests: add tests for mount notification
selinux: add FILE__WATCH_MOUNTNS
samples/vfs: fix printf format string for size_t
fs: allow changing idmappings
fs: add kflags member to struct mount_kattr
fs: add open_tree_attr()
fs: add copy_mount_setattr() helper
fs: add vfs_open_tree() helper
statmount: add a new supported_mask field
samples/vfs: add STATMOUNT_MNT_{G,U}IDMAP
selftests: add tests for using detached mount with overlayfs
samples/vfs: check whether flag was raised
statmount: allow to retrieve idmappings
uidgid: add map_id_range_up()
fs: allow detached mounts in clone_private_mount()
selftests/overlayfs: test specifying layers as O_PATH file descriptors
fs: support O_PATH fds with FSCONFIG_SET_FD
vfs: add notifications for mount attach and detach
fanotify: notify on mount attach and detach
...
|
||
|
Linus Torvalds
|
99c21beaab |
vfs-6.15-rc1.misc
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZ90p4AAKCRCRxhvAZXjc
ojMIAP9atkG3u7+490+NGWLdulQlaHnD51Owa9MiW87UfKpsTQEArwi/NrJqXJNT
PFQ2xIa5TxG+9haChR89w3kjZ6b/hgs=
=iDkx
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.15-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"Features:
- Add CONFIG_DEBUG_VFS infrastucture:
- Catch invalid modes in open
- Use the new debug macros in inode_set_cached_link()
- Use debug-only asserts around fd allocation and install
- Place f_ref to 3rd cache line in struct file to resolve false
sharing
Cleanups:
- Start using anon_inode_getfile_fmode() helper in various places
- Don't take f_lock during SEEK_CUR if exclusion is guaranteed by
f_pos_lock
- Add unlikely() to kcmp()
- Remove legacy ->remount_fs method from ecryptfs after port to the
new mount api
- Remove invalidate_inodes() in favour of evict_inodes()
- Simplify ep_busy_loopER by removing unused argument
- Avoid mmap sem relocks when coredumping with many missing pages
- Inline getname()
- Inline new_inode_pseudo() and de-staticize alloc_inode()
- Dodge an atomic in putname if ref == 1
- Consistently deref the files table with rcu_dereference_raw()
- Dedup handling of struct filename init and refcounts bumps
- Use wq_has_sleeper() in end_dir_add()
- Drop the lock trip around I_NEW wake up in evict()
- Load the ->i_sb pointer once in inode_sb_list_{add,del}
- Predict not reaching the limit in alloc_empty_file()
- Tidy up do_sys_openat2() with likely/unlikely
- Call inode_sb_list_add() outside of inode hash lock
- Sort out fd allocation vs dup2 race commentary
- Turn page_offset() into a wrapper around folio_pos()
- Remove locking in exportfs around ->get_parent() call
- try_lookup_one_len() does not need any locks in autofs
- Fix return type of several functions from long to int in open
- Fix return type of several functions from long to int in ioctls
Fixes:
- Fix watch queue accounting mismatch"
* tag 'vfs-6.15-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (30 commits)
fs: sort out fd allocation vs dup2 race commentary, take 2
fs: call inode_sb_list_add() outside of inode hash lock
fs: tidy up do_sys_openat2() with likely/unlikely
fs: predict not reaching the limit in alloc_empty_file()
fs: load the ->i_sb pointer once in inode_sb_list_{add,del}
fs: drop the lock trip around I_NEW wake up in evict()
fs: use wq_has_sleeper() in end_dir_add()
VFS/autofs: try_lookup_one_len() does not need any locks
fs: dedup handling of struct filename init and refcounts bumps
fs: consistently deref the files table with rcu_dereference_raw()
exportfs: remove locking around ->get_parent() call.
fs: use debug-only asserts around fd allocation and install
fs: dodge an atomic in putname if ref == 1
vfs: Remove invalidate_inodes()
ecryptfs: remove NULL remount_fs from super_operations
watch_queue: fix pipe accounting mismatch
fs: place f_ref to 3rd cache line in struct file to resolve false sharing
epoll: simplify ep_busy_loop by removing always 0 argument
fs: Turn page_offset() into a wrapper around folio_pos()
kcmp: improve performance adding an unlikely hint to task comparisons
...
|
||
|
Arnd Bergmann
|
3fed9fda15 |
net: remove sb1000 cable modem driver
This one is hilariously outdated, it provided a faster downlink over TV cable for users of analog modems in the 1990s, through an ISA card. The web page for the userspace tools has been broken for 25 years, and the driver has only ever seen mechanical updates. Link: http://web.archive.org/web/20000611165545/http://home.adelphia.net:80/~siglercm/sb1000.html Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250312085236.2531870-1-arnd@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
|
Eric Biggers
|
ca17aa6640 |
crypto: lib/chacha - remove unused arch-specific init support
All implementations of chacha_init_arch() just call chacha_init_generic(), so it is pointless. Just delete it, and replace chacha_init() with what was previously chacha_init_generic(). Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Paolo Bonzini
|
361da275e5 |
Merge branch 'kvm-nvmx-and-vm-teardown' into HEAD
The immediate issue being fixed here is a nVMX bug where KVM fails to detect that, after nested VM-Exit, L1 has a pending IRQ (or NMI). However, checking for a pending interrupt accesses the legacy PIC, and x86's kvm_arch_destroy_vm() currently frees the PIC before destroying vCPUs, i.e. checking for IRQs during the forced nested VM-Exit results in a NULL pointer deref; that's a prerequisite for the nVMX fix. The remaining patches attempt to bring a bit of sanity to x86's VM teardown code, which has accumulated a lot of cruft over the years. E.g. KVM currently unloads each vCPU's MMUs in a separate operation from destroying vCPUs, all because when guest SMP support was added, KVM had a kludgy MMU teardown flow that broke when a VM had more than one 1 vCPU. And that oddity lived on, for 18 years... Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Mike Rapoport (Microsoft)
|
8afa901c14 |
arch, mm: make releasing of memory to page allocator more explicit
The point where the memory is released from memblock to the buddy allocator is hidden inside arch-specific mem_init()s and the call to memblock_free_all() is needlessly duplicated in every artiste cure and after introduction of arch_mm_preinit() hook, mem_init() implementation on many architecture only contains the call to memblock_free_all(). Pull memblock_free_all() call into mm_core_init() and drop mem_init() on relevant architectures to make it more explicit where the free memory is released from memblock to the buddy allocator and to reduce code duplication in architecture specific code. Link: https://lkml.kernel.org/r/20250313135003.836600-14-rppt@kernel.org Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Acked-by: Dave Hansen <dave.hansen@linux.intel.com> [x86] Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Tested-by: Mark Brown <broonie@kernel.org> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Andreas Larsson <andreas@gaisler.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Betkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David S. Miller <davem@davemloft.net> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Guo Ren (csky) <guoren@kernel.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Richard Weinberger <richard@nod.at> Cc: Russel King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleinxer <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vineet Gupta <vgupta@kernel.org> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Mike Rapoport (Microsoft)
|
0d98484ee3 |
arch, mm: introduce arch_mm_preinit
Currently, implementation of mem_init() in every architecture consists of one or more of the following: * initializations that must run before page allocator is active, for instance swiotlb_init() * a call to memblock_free_all() to release all the memory to the buddy allocator * initializations that must run after page allocator is ready and there is no arch-specific hook other than mem_init() for that, like for example register_page_bootmem_info() in x86 and sparc64 or simple setting of mem_init_done = 1 in several architectures * a bunch of semi-related stuff that apparently had no better place to live, for example a ton of BUILD_BUG_ON()s in parisc. Introduce arch_mm_preinit() that will be the first thing called from mm_core_init(). On architectures that have initializations that must happen before the page allocator is ready, move those into arch_mm_preinit() along with the code that does not depend on ordering with page allocator setup. On several architectures this results in reduction of mem_init() to a single call to memblock_free_all() that allows its consolidation next. Link: https://lkml.kernel.org/r/20250313135003.836600-13-rppt@kernel.org Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Acked-by: Dave Hansen <dave.hansen@linux.intel.com> [x86] Tested-by: Mark Brown <broonie@kernel.org> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Andreas Larsson <andreas@gaisler.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Betkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David S. Miller <davem@davemloft.net> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Guo Ren (csky) <guoren@kernel.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Richard Weinberger <richard@nod.at> Cc: Russel King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleinxer <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vineet Gupta <vgupta@kernel.org> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Mike Rapoport (Microsoft)
|
6faea3422e |
arch, mm: streamline HIGHMEM freeing
All architectures that support HIGHMEM have their code that frees high memory pages to the buddy allocator while __free_memory_core() is limited to freeing only low memory. There is no actual reason for that. The memory map is completely ready by the time memblock_free_all() is called and high pages can be released to the buddy allocator along with low memory. Remove low memory limit from __free_memory_core() and drop per-architecture code that frees high memory pages. Link: https://lkml.kernel.org/r/20250313135003.836600-12-rppt@kernel.org Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Acked-by: Dave Hansen <dave.hansen@linux.intel.com> [x86] Tested-by: Mark Brown <broonie@kernel.org> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Andreas Larsson <andreas@gaisler.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Betkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David S. Miller <davem@davemloft.net> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Guo Ren (csky) <guoren@kernel.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Richard Weinberger <richard@nod.at> Cc: Russel King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleinxer <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vineet Gupta <vgupta@kernel.org> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Mike Rapoport (Microsoft)
|
8268af309d |
arch, mm: set max_mapnr when allocating memory map for FLATMEM
max_mapnr is essentially the size of the memory map for systems that use FLATMEM. There is no reason to calculate it in each and every architecture when it's anyway calculated in alloc_node_mem_map(). Drop setting of max_mapnr from architecture code and set it once in alloc_node_mem_map(). While on it, move definition of mem_map and max_mapnr to mm/mm_init.c so there won't be two copies for MMU and !MMU variants. Link: https://lkml.kernel.org/r/20250313135003.836600-10-rppt@kernel.org Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Acked-by: Dave Hansen <dave.hansen@linux.intel.com> [x86] Tested-by: Mark Brown <broonie@kernel.org> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Andreas Larsson <andreas@gaisler.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Betkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David S. Miller <davem@davemloft.net> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Guo Ren (csky) <guoren@kernel.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Richard Weinberger <richard@nod.at> Cc: Russel King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleinxer <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vineet Gupta <vgupta@kernel.org> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Sebastian Andrzej Siewior
|
732ed149f7 |
powerpc: Rely on generic printing of preemption model
After the first printk in __die() there is show_regs() -> show_regs_print_info() which prints the current preemption model. Remove the preempion model from the arch code. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com> Link: https://lore.kernel.org/r/20250314160810.2373416-6-bigeasy@linutronix.de |
||
|
Kan Liang
|
d57e94f5b8 |
perf: Supply task information to sched_task()
To save/restore LBR call stack data in system-wide mode, the task_struct information is required. Extend the parameters of sched_task() to supply task_struct information. When schedule in, the LBR call stack data for new task will be restored. When schedule out, the LBR call stack data for old task will be saved. Only need to pass the required task_struct information. Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20250314172700.438923-4-kan.liang@linux.intel.com |
||
|
Anshuman Khandual
|
f9aad62200 |
mm: rename GENERIC_PTDUMP and PTDUMP_CORE
Platforms subscribe into generic ptdump implementation via GENERIC_PTDUMP. But generic ptdump gets enabled via PTDUMP_CORE. These configs combination is confusing as they sound very similar and does not differentiate between platform's feature subscription and feature enablement for ptdump. Rename the configs as ARCH_HAS_PTDUMP and PTDUMP making it more clear and improve readability. Link: https://lkml.kernel.org/r/20250226122404.1927473-6-anshuman.khandual@arm.com Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> (powerpc) Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64] Cc: Will Deacon <will@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marc Zyngier <maz@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Steven Price <steven.price@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Anshuman Khandual
|
2c5e6ac2db |
arch/powerpc: drop GENERIC_PTDUMP from mpc885_ads_defconfig
GENERIC_PTDUMP gets selected on powerpc explicitly and hence can be
dropped off from mpc885_ads_defconfig. Replace with CONFIG_PTDUMP_DEBUGFS
instead.
Link: https://lkml.kernel.org/r/20250226122404.1927473-3-anshuman.khandual@arm.com
Fixes:
|
||
|
Sourabh Jain
|
e3185ee438 |
powerpc/crash: use generic crashkernel reservation
Commit
|
||
|
Sourabh Jain
|
bce074bdbc |
powerpc: insert System RAM resource to prevent crashkernel conflict
The next patch in the series with title "powerpc/crash: use generic
crashkernel reservation" enables powerpc to use generic crashkernel
reservation instead of custom implementation. This leads to exporting of
`Crash Kernel` memory to iomem_resource (/proc/iomem) via
insert_crashkernel_resources():kernel/crash_reserve.c or at another place
in the same file if HAVE_ARCH_ADD_CRASH_RES_TO_IOMEM_EARLY is set.
The add_system_ram_resources():arch/powerpc/mm/mem.c adds `System RAM` to
iomem_resource using request_resource(). This creates a conflict with
`Crash Kernel`, which is added by the generic crashkernel reservation
code. As a result, the kernel ultimately fails to add `System RAM` to
iomem_resource. Consequently, it does not appear in /proc/iomem.
There are multiple approches tried to avoid this:
1. Don't add Crash Kernel to iomem_resource:
- This has two issues.
First, it requires adding an architecture-specific hook in the
generic code. There are already two code paths to choose when to
add `Crash Kernel` to iomem_resource. This adds one more code path
to skip it.
Second, what if `Crash Kernel` is required in /proc/iomem in the
future? Many architectures do export it.
2. Don't add `System RAM` to iomem_resource by reverting commit
|
||
|
Sourabh Jain
|
021b5b303c |
powerpc/crash: preserve user-specified memory limit
Commit |
||
|
Sourabh Jain
|
6e5250eaa6 |
powerpc/crash: use generic APIs to locate memory hole for kdump
On PowerPC, the memory reserved for the crashkernel can contain components like RTAS, TCE, OPAL, etc., which should be avoided when loading kexec segments into crashkernel memory. Due to these special components, PowerPC has its own set of APIs to locate holes in the crashkernel memory for loading kexec segments for kdump. However, for loading kexec segments in the kexec case, PowerPC already uses generic APIs to locate holes. The previous patch in this series, titled "crash: Let arch decide usable memory range in reserved area," introduced arch-specific hook to handle such special regions in the crashkernel area. So, switch PowerPC to use the generic APIs to locate memory holes for kdump and remove the redundant PowerPC-specific APIs. Link: https://lkml.kernel.org/r/20250131113830.925179-5-sourabhjain@linux.ibm.com Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com> Cc: Baoquan he <bhe@redhat.com> Cc: Hari Bathini <hbathini@linux.ibm.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Mahesh Salgaonkar <mahesh@linux.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Frank van der Linden
|
d2d7867140 |
mm/hugetlb: enable bootmem allocation from CMA areas
If hugetlb_cma_only is enabled, we know that hugetlb pages can only be allocated from CMA. Now that there is an interface to do early reservations from a CMA area (returning memblock memory), it can be used to allocate hugetlb pages from CMA. This also allows for doing pre-HVO on these pages (if enabled). Make sure to initialize the page structures and associated data correctly. Create a flag to signal that a hugetlb page has been allocated from CMA to make things a little easier. Some configurations of powerpc have a special hugetlb bootmem allocator, so introduce a boolean arch_specific_huge_bootmem_alloc that returns true if such an allocator is present. In that case, CMA bootmem allocations can't be used, so check that function before trying. Link: https://lkml.kernel.org/r/20250228182928.2645936-27-fvdl@google.com Signed-off-by: Frank van der Linden <fvdl@google.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dan Carpenter <dan.carpenter@linaro.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Joao Martins <joao.m.martins@oracle.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Oscar Salvador <osalvador@suse.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin (Cruise) <roman.gushchin@linux.dev> Cc: Usama Arif <usamaarif642@gmail.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Frank van der Linden
|
752fe17af6 |
mm/hugetlb: add pre-HVO framework
Define flags for pre-HVOed bootmem hugetlb pages, and act on them. The most important flag is the HVO flag, signalling that a bootmem allocated gigantic page has already been HVO-ed. If this flag is seen by the hugetlb bootmem gather code, the page is marked as HVO optimized. The HVO code will then not try to optimize it again. Instead, it will just map the tail page mirror pages read-only, completing the HVO steps. No functional change, as nothing sets the flags yet. Link: https://lkml.kernel.org/r/20250228182928.2645936-18-fvdl@google.com Signed-off-by: Frank van der Linden <fvdl@google.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dan Carpenter <dan.carpenter@linaro.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Joao Martins <joao.m.martins@oracle.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Muchun Song <muchun.song@linux.dev> Cc: Oscar Salvador <osalvador@suse.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin (Cruise) <roman.gushchin@linux.dev> Cc: Usama Arif <usamaarif642@gmail.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Frank van der Linden
|
243a75e236 |
mm/bootmem_info: export register_page_bootmem_memmap
If other mm code wants to use this function for early memmap inialization (on the platforms that have it), it should be made available properly, not just unconditionally in mm.h Make this function available for such cases. Link: https://lkml.kernel.org/r/20250228182928.2645936-10-fvdl@google.com Signed-off-by: Frank van der Linden <fvdl@google.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dan Carpenter <dan.carpenter@linaro.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Joao Martins <joao.m.martins@oracle.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Muchun Song <muchun.song@linux.dev> Cc: Oscar Salvador <osalvador@suse.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin (Cruise) <roman.gushchin@linux.dev> Cc: Usama Arif <usamaarif642@gmail.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |