mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
synced 2025-09-01 15:14:52 +00:00
loongarch-next
2214 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
beace86e61 |
Summary of significant series in this pull request:
- The 4 patch series "mm: ksm: prevent KSM from breaking merging of new
VMAs" from Lorenzo Stoakes addresses an issue with KSM's
PR_SET_MEMORY_MERGE mode: newly mapped VMAs were not eligible for
merging with existing adjacent VMAs.
- The 4 patch series "mm/damon: introduce DAMON_STAT for simple and
practical access monitoring" from SeongJae Park adds a new kernel module
which simplifies the setup and usage of DAMON in production
environments.
- The 6 patch series "stop passing a writeback_control to swap/shmem
writeout" from Christoph Hellwig is a cleanup to the writeback code
which removes a couple of pointers from struct writeback_control.
- The 7 patch series "drivers/base/node.c: optimization and cleanups"
from Donet Tom contains largely uncorrelated cleanups to the NUMA node
setup and management code.
- The 4 patch series "mm: userfaultfd: assorted fixes and cleanups" from
Tal Zussman does some maintenance work on the userfaultfd code.
- The 5 patch series "Readahead tweaks for larger folios" from Ryan
Roberts implements some tuneups for pagecache readahead when it is
reading into order>0 folios.
- The 4 patch series "selftests/mm: Tweaks to the cow test" from Mark
Brown provides some cleanups and consistency improvements to the
selftests code.
- The 4 patch series "Optimize mremap() for large folios" from Dev Jain
does that. A 37% reduction in execution time was measured in a
memset+mremap+munmap microbenchmark.
- The 5 patch series "Remove zero_user()" from Matthew Wilcox expunges
zero_user() in favor of the more modern memzero_page().
- The 3 patch series "mm/huge_memory: vmf_insert_folio_*() and
vmf_insert_pfn_pud() fixes" from David Hildenbrand addresses some warts
which David noticed in the huge page code. These were not known to be
causing any issues at this time.
- The 3 patch series "mm/damon: use alloc_migrate_target() for
DAMOS_MIGRATE_{HOT,COLD" from SeongJae Park provides some cleanup and
consolidation work in DAMON.
- The 3 patch series "use vm_flags_t consistently" from Lorenzo Stoakes
uses vm_flags_t in places where we were inappropriately using other
types.
- The 3 patch series "mm/memfd: Reserve hugetlb folios before
allocation" from Vivek Kasireddy increases the reliability of large page
allocation in the memfd code.
- The 14 patch series "mm: Remove pXX_devmap page table bit and pfn_t
type" from Alistair Popple removes several now-unneeded PFN_* flags.
- The 5 patch series "mm/damon: decouple sysfs from core" from SeongJae
Park implememnts some cleanup and maintainability work in the DAMON
sysfs layer.
- The 5 patch series "madvise cleanup" from Lorenzo Stoakes does quite a
lot of cleanup/maintenance work in the madvise() code.
- The 4 patch series "madvise anon_name cleanups" from Vlastimil Babka
provides additional cleanups on top or Lorenzo's effort.
- The 11 patch series "Implement numa node notifier" from Oscar Salvador
creates a standalone notifier for NUMA node memory state changes.
Previously these were lumped under the more general memory on/offline
notifier.
- The 6 patch series "Make MIGRATE_ISOLATE a standalone bit" from Zi Yan
cleans up the pageblock isolation code and fixes a potential issue which
doesn't seem to cause any problems in practice.
- The 5 patch series "selftests/damon: add python and drgn based DAMON
sysfs functionality tests" from SeongJae Park adds additional drgn- and
python-based DAMON selftests which are more comprehensive than the
existing selftest suite.
- The 5 patch series "Misc rework on hugetlb faulting path" from Oscar
Salvador fixes a rather obscure deadlock in the hugetlb fault code and
follows that fix with a series of cleanups.
- The 3 patch series "cma: factor out allocation logic from
__cma_declare_contiguous_nid" from Mike Rapoport rationalizes and cleans
up the highmem-specific code in the CMA allocator.
- The 28 patch series "mm/migration: rework movable_ops page migration
(part 1)" from David Hildenbrand provides cleanups and
future-preparedness to the migration code.
- The 2 patch series "mm/damon: add trace events for auto-tuned
monitoring intervals and DAMOS quota" from SeongJae Park adds some
tracepoints to some DAMON auto-tuning code.
- The 6 patch series "mm/damon: fix misc bugs in DAMON modules" from
SeongJae Park does that.
- The 6 patch series "mm/damon: misc cleanups" from SeongJae Park also
does what it claims.
- The 4 patch series "mm: folio_pte_batch() improvements" from David
Hildenbrand cleans up the large folio PTE batching code.
- The 13 patch series "mm/damon/vaddr: Allow interleaving in
migrate_{hot,cold} actions" from SeongJae Park facilitates dynamic
alteration of DAMON's inter-node allocation policy.
- The 3 patch series "Remove unmap_and_put_page()" from Vishal Moola
provides a couple of page->folio conversions.
- The 4 patch series "mm: per-node proactive reclaim" from Davidlohr
Bueso implements a per-node control of proactive reclaim - beyond the
current memcg-based implementation.
- The 14 patch series "mm/damon: remove damon_callback" from SeongJae
Park replaces the damon_callback interface with a more general and
powerful damon_call()+damos_walk() interface.
- The 10 patch series "mm/mremap: permit mremap() move of multiple VMAs"
from Lorenzo Stoakes implements a number of mremap cleanups (of course)
in preparation for adding new mremap() functionality: newly permit the
remapping of multiple VMAs when the user is specifying MREMAP_FIXED. It
still excludes some specialized situations where this cannot be
performed reliably.
- The 3 patch series "drop hugetlb_free_pgd_range()" from Anthony Yznaga
switches some sparc hugetlb code over to the generic version and removes
the thus-unneeded hugetlb_free_pgd_range().
- The 4 patch series "mm/damon/sysfs: support periodic and automated
stats update" from SeongJae Park augments the present
userspace-requested update of DAMON sysfs monitoring files. Automatic
update is now provided, along with a tunable to control the update
interval.
- The 4 patch series "Some randome fixes and cleanups to swapfile" from
Kemeng Shi does what is claims.
- The 4 patch series "mm: introduce snapshot_page" from Luiz Capitulino
and David Hildenbrand provides (and uses) a means by which debug-style
functions can grab a copy of a pageframe and inspect it locklessly
without tripping over the races inherent in operating on the live
pageframe directly.
- The 6 patch series "use per-vma locks for /proc/pid/maps reads" from
Suren Baghdasaryan addresses the large contention issues which can be
triggered by reads from that procfs file. Latencies are reduced by more
than half in some situations. The series also introduces several new
selftests for the /proc/pid/maps interface.
- The 6 patch series "__folio_split() clean up" from Zi Yan cleans up
__folio_split()!
- The 7 patch series "Optimize mprotect() for large folios" from Dev
Jain provides some quite large (>3x) speedups to mprotect() when dealing
with large folios.
- The 2 patch series "selftests/mm: reuse FORCE_READ to replace "asm
volatile("" : "+r" (XXX));" and some cleanup" from wang lian does some
cleanup work in the selftests code.
- The 3 patch series "tools/testing: expand mremap testing" from Lorenzo
Stoakes extends the mremap() selftest in several ways, including adding
more checking of Lorenzo's recently added "permit mremap() move of
multiple VMAs" feature.
- The 22 patch series "selftests/damon/sysfs.py: test all parameters"
from SeongJae Park extends the DAMON sysfs interface selftest so that it
tests all possible user-requested parameters. Rather than the present
minimal subset.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaIqcCgAKCRDdBJ7gKXxA
jkVBAQCCn9DR1QP0CRk961ot0cKzOgioSc0aA03DPb2KXRt2kQEAzDAz0ARurFhL
8BzbvI0c+4tntHLXvIlrC33n9KWAOQM=
=XsFy
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2025-07-30-15-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"As usual, many cleanups. The below blurbiage describes 42 patchsets.
21 of those are partially or fully cleanup work. "cleans up",
"cleanup", "maintainability", "rationalizes", etc.
I never knew the MM code was so dirty.
"mm: ksm: prevent KSM from breaking merging of new VMAs" (Lorenzo Stoakes)
addresses an issue with KSM's PR_SET_MEMORY_MERGE mode: newly
mapped VMAs were not eligible for merging with existing adjacent
VMAs.
"mm/damon: introduce DAMON_STAT for simple and practical access monitoring" (SeongJae Park)
adds a new kernel module which simplifies the setup and usage of
DAMON in production environments.
"stop passing a writeback_control to swap/shmem writeout" (Christoph Hellwig)
is a cleanup to the writeback code which removes a couple of
pointers from struct writeback_control.
"drivers/base/node.c: optimization and cleanups" (Donet Tom)
contains largely uncorrelated cleanups to the NUMA node setup and
management code.
"mm: userfaultfd: assorted fixes and cleanups" (Tal Zussman)
does some maintenance work on the userfaultfd code.
"Readahead tweaks for larger folios" (Ryan Roberts)
implements some tuneups for pagecache readahead when it is reading
into order>0 folios.
"selftests/mm: Tweaks to the cow test" (Mark Brown)
provides some cleanups and consistency improvements to the
selftests code.
"Optimize mremap() for large folios" (Dev Jain)
does that. A 37% reduction in execution time was measured in a
memset+mremap+munmap microbenchmark.
"Remove zero_user()" (Matthew Wilcox)
expunges zero_user() in favor of the more modern memzero_page().
"mm/huge_memory: vmf_insert_folio_*() and vmf_insert_pfn_pud() fixes" (David Hildenbrand)
addresses some warts which David noticed in the huge page code.
These were not known to be causing any issues at this time.
"mm/damon: use alloc_migrate_target() for DAMOS_MIGRATE_{HOT,COLD" (SeongJae Park)
provides some cleanup and consolidation work in DAMON.
"use vm_flags_t consistently" (Lorenzo Stoakes)
uses vm_flags_t in places where we were inappropriately using other
types.
"mm/memfd: Reserve hugetlb folios before allocation" (Vivek Kasireddy)
increases the reliability of large page allocation in the memfd
code.
"mm: Remove pXX_devmap page table bit and pfn_t type" (Alistair Popple)
removes several now-unneeded PFN_* flags.
"mm/damon: decouple sysfs from core" (SeongJae Park)
implememnts some cleanup and maintainability work in the DAMON
sysfs layer.
"madvise cleanup" (Lorenzo Stoakes)
does quite a lot of cleanup/maintenance work in the madvise() code.
"madvise anon_name cleanups" (Vlastimil Babka)
provides additional cleanups on top or Lorenzo's effort.
"Implement numa node notifier" (Oscar Salvador)
creates a standalone notifier for NUMA node memory state changes.
Previously these were lumped under the more general memory
on/offline notifier.
"Make MIGRATE_ISOLATE a standalone bit" (Zi Yan)
cleans up the pageblock isolation code and fixes a potential issue
which doesn't seem to cause any problems in practice.
"selftests/damon: add python and drgn based DAMON sysfs functionality tests" (SeongJae Park)
adds additional drgn- and python-based DAMON selftests which are
more comprehensive than the existing selftest suite.
"Misc rework on hugetlb faulting path" (Oscar Salvador)
fixes a rather obscure deadlock in the hugetlb fault code and
follows that fix with a series of cleanups.
"cma: factor out allocation logic from __cma_declare_contiguous_nid" (Mike Rapoport)
rationalizes and cleans up the highmem-specific code in the CMA
allocator.
"mm/migration: rework movable_ops page migration (part 1)" (David Hildenbrand)
provides cleanups and future-preparedness to the migration code.
"mm/damon: add trace events for auto-tuned monitoring intervals and DAMOS quota" (SeongJae Park)
adds some tracepoints to some DAMON auto-tuning code.
"mm/damon: fix misc bugs in DAMON modules" (SeongJae Park)
does that.
"mm/damon: misc cleanups" (SeongJae Park)
also does what it claims.
"mm: folio_pte_batch() improvements" (David Hildenbrand)
cleans up the large folio PTE batching code.
"mm/damon/vaddr: Allow interleaving in migrate_{hot,cold} actions" (SeongJae Park)
facilitates dynamic alteration of DAMON's inter-node allocation
policy.
"Remove unmap_and_put_page()" (Vishal Moola)
provides a couple of page->folio conversions.
"mm: per-node proactive reclaim" (Davidlohr Bueso)
implements a per-node control of proactive reclaim - beyond the
current memcg-based implementation.
"mm/damon: remove damon_callback" (SeongJae Park)
replaces the damon_callback interface with a more general and
powerful damon_call()+damos_walk() interface.
"mm/mremap: permit mremap() move of multiple VMAs" (Lorenzo Stoakes)
implements a number of mremap cleanups (of course) in preparation
for adding new mremap() functionality: newly permit the remapping
of multiple VMAs when the user is specifying MREMAP_FIXED. It still
excludes some specialized situations where this cannot be performed
reliably.
"drop hugetlb_free_pgd_range()" (Anthony Yznaga)
switches some sparc hugetlb code over to the generic version and
removes the thus-unneeded hugetlb_free_pgd_range().
"mm/damon/sysfs: support periodic and automated stats update" (SeongJae Park)
augments the present userspace-requested update of DAMON sysfs
monitoring files. Automatic update is now provided, along with a
tunable to control the update interval.
"Some randome fixes and cleanups to swapfile" (Kemeng Shi)
does what is claims.
"mm: introduce snapshot_page" (Luiz Capitulino and David Hildenbrand)
provides (and uses) a means by which debug-style functions can grab
a copy of a pageframe and inspect it locklessly without tripping
over the races inherent in operating on the live pageframe
directly.
"use per-vma locks for /proc/pid/maps reads" (Suren Baghdasaryan)
addresses the large contention issues which can be triggered by
reads from that procfs file. Latencies are reduced by more than
half in some situations. The series also introduces several new
selftests for the /proc/pid/maps interface.
"__folio_split() clean up" (Zi Yan)
cleans up __folio_split()!
"Optimize mprotect() for large folios" (Dev Jain)
provides some quite large (>3x) speedups to mprotect() when dealing
with large folios.
"selftests/mm: reuse FORCE_READ to replace "asm volatile("" : "+r" (XXX));" and some cleanup" (wang lian)
does some cleanup work in the selftests code.
"tools/testing: expand mremap testing" (Lorenzo Stoakes)
extends the mremap() selftest in several ways, including adding
more checking of Lorenzo's recently added "permit mremap() move of
multiple VMAs" feature.
"selftests/damon/sysfs.py: test all parameters" (SeongJae Park)
extends the DAMON sysfs interface selftest so that it tests all
possible user-requested parameters. Rather than the present minimal
subset"
* tag 'mm-stable-2025-07-30-15-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (370 commits)
MAINTAINERS: add missing headers to mempory policy & migration section
MAINTAINERS: add missing file to cgroup section
MAINTAINERS: add MM MISC section, add missing files to MISC and CORE
MAINTAINERS: add missing zsmalloc file
MAINTAINERS: add missing files to page alloc section
MAINTAINERS: add missing shrinker files
MAINTAINERS: move memremap.[ch] to hotplug section
MAINTAINERS: add missing mm_slot.h file THP section
MAINTAINERS: add missing interval_tree.c to memory mapping section
MAINTAINERS: add missing percpu-internal.h file to per-cpu section
mm/page_alloc: remove trace_mm_alloc_contig_migrate_range_info()
selftests/damon: introduce _common.sh to host shared function
selftests/damon/sysfs.py: test runtime reduction of DAMON parameters
selftests/damon/sysfs.py: test non-default parameters runtime commit
selftests/damon/sysfs.py: generalize DAMON context commit assertion
selftests/damon/sysfs.py: generalize monitoring attributes commit assertion
selftests/damon/sysfs.py: generalize DAMOS schemes commit assertion
selftests/damon/sysfs.py: test DAMOS filters commitment
selftests/damon/sysfs.py: generalize DAMOS scheme commit assertion
selftests/damon/sysfs.py: test DAMOS destinations commitment
...
|
||
|
David Hildenbrand
|
15504b1163 |
mm/balloon_compaction: convert balloon_page_delete() to balloon_page_finalize()
Let's move the removal of the page from the balloon list into the single
caller, to remove the dependency on the PG_isolated flag and clarify
locking requirements.
Note that for now, balloon_page_delete() was used on two paths:
(1) Removing a page from the balloon for deflation through
balloon_page_list_dequeue()
(2) Removing an isolated page from the balloon for migration in the
per-driver migration handlers. Isolated pages were already removed from
the balloon list during isolation.
So instead of relying on the flag, we can just distinguish both cases
directly and handle it accordingly in the caller.
We'll shuffle the operations a bit such that they logically make more
sense (e.g., remove from the list before clearing flags).
In balloon migration functions we can now move the balloon_page_finalize()
out of the balloon lock and perform the finalization just before dropping
the balloon reference.
Document that the page lock is currently required when modifying the
movability aspects of a page; hopefully we can soon decouple this from the
page lock.
Link: https://lkml.kernel.org/r/20250704102524.326966-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Byungchul Park <byungchul@sk.com>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Eugenio Pé rez <eperezma@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Gregory Price <gourry@gourry.net>
Cc: Harry Yoo <harry.yoo@oracle.com>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jerrin Shaji George <jerrin.shaji-george@broadcom.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mathew Brost <matthew.brost@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: xu xin <xu.xin16@zte.com.cn>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
||
|
Donet Tom
|
a5352f8a40 |
drivers/base/node: rename __register_one_node() to register_one_node()
The register_one_node() function was a simple wrapper around __register_one_node(). To simplify the code, register_one_node() has been removed, and __register_one_node() has been renamed to register_one_node(). Link: https://lkml.kernel.org/r/8262cd0f44eeb048a1fcd3ac8382760d7f7dea60.1748452242.git.donettom@linux.ibm.com Signed-off-by: Donet Tom <donettom@linux.ibm.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Mike Rapoport (Microsoft) <rppt@kernel.org> Cc: Oscar Salvador <osalvador@suse.de> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Srish Srinivasan
|
c1d96cd9a1 |
powerpc/secvar: Expose secvars relevant to the key management mode
The PLPKS enabled PowerVM LPAR sysfs exposes all of the secure boot secvars irrespective of the key management mode. The PowerVM LPAR supports static and dynamic key management for secure boot. The key management option can be updated in the management console. The secvars PK, trustedcadb, and moduledb can be consumed both in the static and dynamic key management modes for the loading of signed third-party kernel modules. However, other secvars i.e. KEK, grubdb, grubdbx, sbat, db and dbx, which are used to verify the grub and kernel images, are consumed only in the dynamic key management mode. Expose only PK, trustedcadb, and moduledb in the static key management mode. Co-developed-by: Souradeep <soura@imap.linux.ibm.com> Signed-off-by: Souradeep <soura@imap.linux.ibm.com> Signed-off-by: Srish Srinivasan <ssrish@linux.ibm.com> Tested-by: R Nageswara Sastry <rnsastry@linux.ibm.com> Reviewed-by: Mimi Zohar <zohar@linux.ibm.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Nayna Jain <nayna@linux.ibm.com> Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250610211907.101384-3-ssrish@linux.ibm.com |
||
|
Srish Srinivasan
|
fbf355f32b |
powerpc/pseries: Correct secvar format representation for static key management
On a PLPKS enabled PowerVM LPAR, the secvar format property for static key management is misrepresented as "ibm,plpks-sb-unknown", creating reason for confusion. Static key management mode uses fixed, built-in keys. Dynamic key management mode allows keys to be updated in production to handle security updates without firmware rebuilds. Define a function named plpks_get_sb_keymgmt_mode() to retrieve the key management mode based on the existence of the SB_VERSION property in the firmware. Set the secvar format property to either "ibm,plpks-sb-v<version>" or "ibm,plpks-sb-v0" based on the key management mode, and return the length of the secvar format property. Co-developed-by: Souradeep <soura@imap.linux.ibm.com> Signed-off-by: Souradeep <soura@imap.linux.ibm.com> Signed-off-by: Srish Srinivasan <ssrish@linux.ibm.com> Tested-by: R Nageswara Sastry <rnsastry@linux.ibm.com> Reviewed-by: Mimi Zohar <zohar@linux.ibm.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Nayna Jain <nayna@linux.ibm.com> Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250610211907.101384-2-ssrish@linux.ibm.com |
||
|
Haren Myneni
|
41a1452759 |
powerpc/pseries/dlpar: Search DRC index from ibm,drc-indexes for IO add
IO hotplug add event is handled in the user space with drmgr tool.
After the device is enabled, the user space uses /sys/kernel/dlpar
interface with “dt add index <drc_index>” to update the device tree.
The kernel interface (dlpar_hp_dt_add()) finds the parent node for
the specified ‘drc_index’ from ibm,drc-info property. The recent FW
provides this property from 2017 onwards. But KVM guest code in
some releases is still using the older SLOF firmware which has
ibm,drc-indexes property instead of ibm,drc-info.
If the ibm,drc-info is not available, this patch adds changes to
search ‘drc_index’ from the indexes array in ibm,drc-indexes
property to support old FW.
Fixes:
|
||
|
Linus Torvalds
|
2bd1bea5fa |
A set of cleanups for the generic interrupt subsystem:
- Consolidate on one set of functions for the interrupt domain code to
get rid of pointlessly duplicated code with only marginal different
semantics.
- Update the documentation accordingly and consolidate the coding style
of the irqdomain header.
-----BEGIN PGP SIGNATURE-----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=9nLp
-----END PGP SIGNATURE-----
Merge tag 'irq-cleanups-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq cleanups from Thomas Gleixner:
"A set of cleanups for the generic interrupt subsystem:
- Consolidate on one set of functions for the interrupt domain code
to get rid of pointlessly duplicated code with only marginal
different semantics.
- Update the documentation accordingly and consolidate the coding
style of the irqdomain header"
* tag 'irq-cleanups-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
irqdomain: Consolidate coding style
irqdomain: Fix kernel-doc and add it to Documentation
Documentation: irqdomain: Update it
Documentation: irq-domain.rst: Simple improvements
Documentation: irq/concepts: Minor improvements
Documentation: irq/concepts: Add commas and reflow
irqdomain: Improve kernel-docs of functions
irqdomain: Make struct irq_domain_info variables const
irqdomain: Use irq_domain_instantiate()'s return value as initializers
irqdomain: Drop irq_linear_revmap()
pinctrl: keembay: Switch to irq_find_mapping()
irqchip/armada-370-xp: Switch to irq_find_mapping()
gpu: ipu-v3: Switch to irq_find_mapping()
gpio: idt3243x: Switch to irq_find_mapping()
sh: Switch to irq_find_mapping()
powerpc: Switch to irq_find_mapping()
irqdomain: Drop irq_domain_add_*() functions
powerpc: Switch irq_domain_add_nomap() to use fwnode
thermal: Switch to irq_domain_create_linear()
soc: Switch to irq_domain_create_*()
...
|
||
|
Linus Torvalds
|
3349ada3cf |
powerpc updates for 6.16
- Support for dynamic preemption - Migrate powerpc boards GPIO driver to new setter API - Added new PMU for KVM host-wide measurement - Enhancement to htmdump driver to support more functions - Added character device for couple RTAS supported APIs - Minor fixes and cleanup Thanks to: Amit Machhiwal, Athira Rajeev, Bagas Sanjaya, Bartosz Golaszewski, Christophe Leroy, Eddie James, Gaurav Batra, Gautam Menghani, Geert Uytterhoeven, Haren Myneni, Hari Bathini, Jiri Slaby (SUSE), Linus Walleij, Michal Suchanek, Naveen N Rao (AMD), Nilay Shroff, Ricardo B. Marlière, Ritesh Harjani (IBM), Sathvika Vasireddy, Shrikanth Hegde, Stephen Rothwell, Sourabh Jain, Thorsten Blum, Vaibhav Jain, Venkat Rao Bagalkote, Viktor Malik -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEqX2DNAOgU8sBX3pRpnEsdPSHZJQFAmgzykEACgkQpnEsdPSH ZJTEIg//a+m4lxMOO5rm6ND2nmp0/fDtC9aBpX/GNH6ZkOJX+aFH1eC0vcXX3guh N5dMc9bbOomhDMABWH7fZcs/VCMaSCd+vrg/IulpZmqrLnd+w/qlD9IKbAcQrE7y 8m/zQ+bwsq7MRVDBHRqEmvqpUVAvAqTtF7iVA5k/YptNHCDjqI8y0/YcDBOmJrsd GhbFVWFS95M5TeC4SFRfzr9Tb6GffNMqhZROeJfmzJlwigAztcfw7oNUvFbnexLI Vz3Xoflbv6oY1azdq+W9XbUcH+QCG0Ua6nVpRqutzYYFCCnUysv1EujeTGVdoR7v KDuzKSPLk6LuJRi8T/nOl2ggUD6zREJ9CE6/uRBntGBt+bl2Zb/yDr8xJ1ELHkdB TzPGy6PoJ1lxyvV9clO1TdSBuGYMV/21XK7O5MG7tCSFUCTdAOVp9wbAHOUAU7+Q 5rvW9yrNhMPcAfWV3uFY3DPVYWnDFxVmsRVL87S3vPsvQm8v63AJYWctmjvqnuQE 619F13HiS3M4HqcPupKsxV5w/1Yj2+Wz8QKg2umtdBdlSA9fmdtDpsEXh7kJJrah mVR9m28ffbEmd1pBaHoUVBT0j1pEQtXXIiKUhEdANfkBfoRIpeROq1VqLLeKos3B Dj9KgR+EOqwR0syqkV6AHAaSwqCur1r6ZSkGTA8urC/2HJ/YZC0= =dsj5 -----END PGP SIGNATURE----- Merge tag 'powerpc-6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Madhavan Srinivasan: - Support for dynamic preemption - Migrate powerpc boards GPIO driver to new setter API - Added new PMU for KVM host-wide measurement - Enhancement to htmdump driver to support more functions - Added character device for couple RTAS supported APIs - Minor fixes and cleanup Thanks to Amit Machhiwal, Athira Rajeev, Bagas Sanjaya, Bartosz Golaszewski, Christophe Leroy, Eddie James, Gaurav Batra, Gautam Menghani, Geert Uytterhoeven, Haren Myneni, Hari Bathini, Jiri Slaby (SUSE), Linus Walleij, Michal Suchanek, Naveen N Rao (AMD), Nilay Shroff, Ricardo B. Marlière, Ritesh Harjani (IBM), Sathvika Vasireddy, Shrikanth Hegde, Stephen Rothwell, Sourabh Jain, Thorsten Blum, Vaibhav Jain, Venkat Rao Bagalkote, and Viktor Malik. * tag 'powerpc-6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (52 commits) MAINTAINERS: powerpc: Remove myself as a reviewer powerpc/iommu: Use str_disabled_enabled() helper powerpc/powermac: Use str_enabled_disabled() and str_on_off() helpers powerpc/mm/fault: Use str_write_read() helper function powerpc: Replace strcpy() with strscpy() in proc_ppc64_init() powerpc/pseries/iommu: Fix kmemleak in TCE table userspace view powerpc/kernel: Fix ppc_save_regs inclusion in build powerpc: Transliterate author name and remove FIXME powerpc/pseries/htmdump: Include header file to get is_kvm_guest() definition KVM: PPC: Book3S HV: Fix IRQ map warnings with XICS on pSeries KVM Guest powerpc/8xx: Reduce alignment constraint for kernel memory powerpc/boot: Fix build with gcc 15 powerpc/pseries/htmdump: Add documentation for H_HTM debugfs interface powerpc/pseries/htmdump: Add htm capabilities support to htmdump module powerpc/pseries/htmdump: Add htm flags support to htmdump module powerpc/pseries/htmdump: Add htm setup support to htmdump module powerpc/pseries/htmdump: Add htm info support to htmdump module powerpc/pseries/htmdump: Add htm status support to htmdump module powerpc/pseries/htmdump: Add htm start support to htmdump module powerpc/pseries/htmdump: Add htm configure support to htmdump module ... |
||
|
Jiri Slaby (SUSE)
|
f09831892c |
powerpc: Switch to of_fwnode_handle()
of_node_to_fwnode() is irqdomain's reimplementation of the "officially" defined of_fwnode_handle(). The former is in the process of being removed, so use the latter instead. [ tglx: Fix up subject prefix ] Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/20250319092951.37667-9-jirislaby@kernel.org |
||
|
Gaurav Batra
|
d36e3f11fe |
powerpc/pseries/iommu: Fix kmemleak in TCE table userspace view
When a device is opened by a userspace driver, via VFIO interface, DMA
window is created. This DMA window has TCE Table and a corresponding
data for userview of TCE table.
When the userspace driver closes the device, all the above infrastructure
is free'ed and the device control given back to kernel. Both DMA window
and TCE table is getting free'ed. But due to a code bug, userview of the
TCE table is not getting free'ed. This is resulting in a memory leak.
Befow is the information from KMEMLEAK
unreferenced object 0xc008000022af0000 (size 16777216):
comm "senlib_unit_tes", pid 9346, jiffies 4294983174
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc 0):
kmemleak_vmalloc+0xc8/0x1a0
__vmalloc_node_range+0x284/0x340
vzalloc+0x58/0x70
spapr_tce_create_table+0x4b0/0x8d0
tce_iommu_create_table+0xcc/0x170 [vfio_iommu_spapr_tce]
tce_iommu_create_window+0x144/0x2f0 [vfio_iommu_spapr_tce]
tce_iommu_ioctl.part.0+0x59c/0xc90 [vfio_iommu_spapr_tce]
vfio_fops_unl_ioctl+0x88/0x280 [vfio]
sys_ioctl+0xf4/0x160
system_call_exception+0x164/0x310
system_call_vectored_common+0xe8/0x278
unreferenced object 0xc008000023b00000 (size 4194304):
comm "senlib_unit_tes", pid 9351, jiffies 4294984116
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc 0):
kmemleak_vmalloc+0xc8/0x1a0
__vmalloc_node_range+0x284/0x340
vzalloc+0x58/0x70
spapr_tce_create_table+0x4b0/0x8d0
tce_iommu_create_table+0xcc/0x170 [vfio_iommu_spapr_tce]
tce_iommu_create_window+0x144/0x2f0 [vfio_iommu_spapr_tce]
tce_iommu_create_default_window+0x88/0x120 [vfio_iommu_spapr_tce]
tce_iommu_ioctl.part.0+0x57c/0xc90 [vfio_iommu_spapr_tce]
vfio_fops_unl_ioctl+0x88/0x280 [vfio]
sys_ioctl+0xf4/0x160
system_call_exception+0x164/0x310
system_call_vectored_common+0xe8/0x278
Fixes:
|
||
|
Athira Rajeev
|
2c54e43157 |
powerpc/pseries/htmdump: Include header file to get is_kvm_guest() definition
htmdump_init calls is_kvm_guest() to check for guest environment.
is_kvm_guest() is defined in kvm_guest.h header file. Without including
the header file, build hits error failing to find the function.
arch/powerpc/platforms/pseries/htmdump.c: In function 'htmdump_init':
arch/powerpc/platforms/pseries/htmdump.c:469:6: error: implicit declaration of function 'is_kvm_guest';
did you mean '__key_get'? [-Werror=implicit-function-declaration]
if (is_kvm_guest()) {
^~~~~~~~~~~~
__key_get
This is observed in configs where CONFIG_KVM_GUEST is disabled.
Include header file explicitly to avoid the build error
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202505061324.elUl4njU-lkp@intel.com/
Signed-off-by: Athira Rajeev <atrajeev@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250506135232.69014-1-atrajeev@linux.ibm.com
|
||
|
Athira Rajeev
|
143a258462 |
powerpc/pseries/htmdump: Add htm capabilities support to htmdump module
Support dumping HTM capabilities information from Hardware Trace Macro (HTM) function via debugfs interface. Under debugfs folder "/sys/kernel/debug/powerpc/htmdump", add file "htmcaps". The interface allows only read of this file which will present the content of HTM buffer from the hcall. Signed-off-by: Athira Rajeev <atrajeev@linux.ibm.com> Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250420180844.53128-9-atrajeev@linux.ibm.com |
||
|
Athira Rajeev
|
d3f24bf27b |
powerpc/pseries/htmdump: Add htm flags support to htmdump module
Under debugfs folder, "/sys/kernel/debug/powerpc/htmdump", add file "htmflags". Currently supported flag value is to enable/disable HTM buffer wrap. wrap is used along with "configure" to prevent HTM buffer from wrapping. Writing 1 will set noWrap while configuring HTM Signed-off-by: Athira Rajeev <atrajeev@linux.ibm.com> Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250420180844.53128-8-atrajeev@linux.ibm.com |
||
|
Athira Rajeev
|
78fb17ac68 |
powerpc/pseries/htmdump: Add htm setup support to htmdump module
Add htm setup support to htmdump module. To use the HTM (Hardware Trace Macro), HTM buffer has to be allocated. Support setup of HTM buffers via debugfs interface. Under debugfs folder, "/sys/kernel/debug/powerpc/htmdump", add file "htmsetup". The interface allows setup of HTM buffer by writing size of HTM buffer in power of 2 to the "htmsetup" file Signed-off-by: Athira Rajeev <atrajeev@linux.ibm.com> Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250420180844.53128-7-atrajeev@linux.ibm.com |
||
|
Athira Rajeev
|
dea7384e14 |
powerpc/pseries/htmdump: Add htm info support to htmdump module
Support dumping system processor configuration from Hardware Trace Macro (HTM) function via debugfs interface. Under debugfs folder "/sys/kernel/debug/powerpc/htmdump", add file "htminfo". The interface allows only read of this file which will present the content of HTM buffer from the hcall. The 16th offset of HTM buffer has value for the number of entries for array of processors. Use this information to copy data to the debugfs file Signed-off-by: Athira Rajeev <atrajeev@linux.ibm.com> Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250420180844.53128-6-atrajeev@linux.ibm.com |
||
|
Athira Rajeev
|
627cf584f4 |
powerpc/pseries/htmdump: Add htm status support to htmdump module
Support dumping status of Hardware Trace Macro (HTM) function via debugfs interface. Under debugfs folder "/sys/kernel/debug/powerpc/htmdump", add file "htmstatus". The interface allows only read of this file which will present the content of HTM status buffer from the hcall. The 16th offset of HTM status buffer has value for the number of HTM entries in the status buffer. Each nest htm status entry is 0x6 bytes, where as core HTM status entry is 0x8 bytes. Calculate the number of bytes to read based on this detail. Signed-off-by: Athira Rajeev <atrajeev@linux.ibm.com> Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250420180844.53128-5-atrajeev@linux.ibm.com |
||
|
Athira Rajeev
|
e03e4b12de |
powerpc/pseries/htmdump: Add htm start support to htmdump module
Support starting of Hardware Trace Macro (HTM) function via debugfs interface. Under debugfs folder "/sys/kernel/debug/powerpc/htmdump", add file "htmstart". The interface allows starting of htm via this file by writing value "1". Also allows stopping of htm tracing by writing value "0" to this file. Any other value returns -EINVAL. Signed-off-by: Athira Rajeev <atrajeev@linux.ibm.com> Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250420180844.53128-4-atrajeev@linux.ibm.com |
||
|
Athira Rajeev
|
c6edd034e3 |
powerpc/pseries/htmdump: Add htm configure support to htmdump module
Support configuring of Hardware Trace Macro (HTM) function via debugfs interface. Under debugfs folder "/sys/kernel/debug/powerpc/htmdump", add file "htmconfigure". The interface allows configuring of htm via this file by writing value "1". Allow deconfiguring of htm via this file by writing value "0". Any other value returns -EINVAL. Signed-off-by: Athira Rajeev <atrajeev@linux.ibm.com> Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250420180844.53128-3-atrajeev@linux.ibm.com |
||
|
Athira Rajeev
|
6e204ef3b7 |
powerpc/pseries/htmdump: Add htm_hcall_wrapper to integrate other htm operations
H_HTM (Hardware Trace Macro) hypervisor call is an HCALL to export data from Hardware Trace Macro (HTM) function. The debugfs interface to export the HTM function data in an lpar currently supports only dumping of HTM data in an lpar. To add support for setup, configuration and control of HTM function via debugfs interface, update the hcall wrapper function. Rename and update htm_get_dump_hardware to htm_hcall_wrapper() so that it can be used for other HTM operations as well. Additionally include parameter "htm_op". Update htmdump module to check the return code of hcall in a separate function so that it can be reused for other option too. Add check to disable the interface in guest environment. Signed-off-by: Athira Rajeev <atrajeev@linux.ibm.com> Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250420180844.53128-2-atrajeev@linux.ibm.com |
||
|
Gautam Menghani
|
9cc0eafd28 |
powerpc/pseries/msi: Avoid reading PCI device registers in reduced power states
When a system is being suspended to RAM, the PCI devices are also
suspended and the PPC code ends up calling pseries_msi_compose_msg() and
this triggers the BUG_ON() in __pci_read_msi_msg() because the device at
this point is in reduced power state. In reduced power state, the memory
mapped registers of the PCI device are not accessible.
To replicate the bug:
1. Make sure deep sleep is selected
# cat /sys/power/mem_sleep
s2idle [deep]
2. Make sure console is not suspended (so that dmesg logs are visible)
echo N > /sys/module/printk/parameters/console_suspend
3. Suspend the system
echo mem > /sys/power/state
To fix this behaviour, read the cached msi message of the device when the
device is not in PCI_D0 power state instead of touching the hardware.
Fixes:
|
||
|
Haren Myneni
|
86900ab620 |
powerpc/pseries: Add a char driver for physical-attestation RTAS
The RTAS call ibm,physical-attestation is used to retrieve
information about the trusted boot state of the firmware and
hypervisor on the system, and also Trusted Platform Modules (TPM)
data if the system is TCG 2.0 compliant.
This RTAS interface expects the caller to define different command
structs such as RetrieveTPMLog, RetrievePlatformCertificat and etc,
in a work area with a maximum size of 4K bytes and the response
buffer will be returned in the same work area.
The current implementation of this RTAS function is in the user
space but allocation of the work area is restricted with the system
lockdown. So this patch implements this RTAS function in the kernel
and expose to the user space with open/ioctl/read interfaces.
PAPR (2.13+ 21.3 ibm,physical-attestation) defines RTAS function:
- Pass the command struct to obtain the response buffer for the
specific command.
- This RTAS function is sequence RTAS call and has to issue RTAS
call multiple times to get the complete response buffer (max 64K).
The hypervisor expects the first RTAS call with the sequence 1 and
the subsequent calls with the sequence number returned from the
previous calls.
Expose these interfaces to user space with a
/dev/papr-physical-attestation character device using the following
programming model:
int devfd = open("/dev/papr-physical-attestation");
int fd = ioctl(devfd, PAPR_PHY_ATTEST_IOC_HANDLE,
struct papr_phy_attest_io_block);
- The user space defines the command struct and requests the
response for any command.
- Obtain the complete response buffer and returned the buffer as
blob to the command specific FD.
size = read(fd, buf, len);
- Can retrieve the response buffer once or multiple times until the
end of BLOB buffer.
Implemented this new kernel ABI support in librtas library for
system lockdown
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250416225743.596462-8-haren@linux.ibm.com
|
||
|
Haren Myneni
|
8aa9efc0be |
powerpc/pseries: Add papr-platform-dump character driver for dump retrieval
ibm,platform-dump RTAS call in combination with writable mapping
/dev/mem is issued to collect platform dump from the hypervisor
and may need multiple calls to get the complete dump. The current
implementation uses rtas_platform_dump() API provided by librtas
library to issue these RTAS calls. But /dev/mem access by the
user space is prohibited under system lockdown.
The solution should be to restrict access to RTAS function in user
space and provide kernel interfaces to collect dump. This patch
adds papr-platform-dump character driver and expose standard
interfaces such as open / ioctl/ read to user space in ways that
are compatible with lockdown.
PAPR (7.3.3.4.1 ibm,platform-dump) provides a method to obtain
the complete dump:
- Each dump will be identified by ID called dump tag.
- A sequence of RTAS calls have to be issued until retrieve the
complete dump. The hypervisor expects the first RTAS call with
the sequence 0 and the subsequent calls with the sequence
number returned from the previous calls.
- The hypervisor returns "dump complete" status once the complete
dump is retrieved. But expects one more RTAS call from the
partition with the NULL buffer to invalidate dump which means
the dump will be removed in the hypervisor.
- Sequence of calls are allowed with different dump IDs at the
same time but not with the same dump ID.
Expose these interfaces to user space with a /dev/papr-platform-dump
character device using the following programming model:
int devfd = open("/dev/papr-platform-dump", O_RDONLY);
int fd = ioctl(devfd,PAPR_PLATFORM_DUMP_IOC_CREATE_HANDLE, &dump_id)
- Restrict user space to access with the same dump ID.
Typically we do not expect user space requests the dump
again for the same dump ID.
char *buf = malloc(size);
length = read(fd, buf, size);
- size should be minimum 1K based on PAPR and <= 4K based
on RTAS work area size. It will be restrict to RTAS work
area size. Using 4K work area based on the current
implementation in librtas library
- Each read call issue RTAS call to get the data based on
the size requirement and returns bytes returned from the
hypervisor
- If the previous call returns dump complete status, the
next read returns 0 like EOF.
ret = ioctl(PAPR_PLATFORM_DUMP_IOC_INVALIDATE, &dump_id)
- RTAS call with NULL buffer to invalidates the dump.
The read API should use the file descriptor obtained from ioctl
based on dump ID so that gets dump contents for the corresponding
dump ID. Implemented support in librtas (rtas_platform_dump()) for
this new ABI to support system lockdown.
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Tested-by: Sathvika Vasireddy <sv@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250416225743.596462-7-haren@linux.ibm.com
|
||
|
Haren Myneni
|
496c7524dc |
powerpc/pseries: Add ibm,get-dynamic-sensor-state RTAS call support
The RTAS call ibm,get-dynamic-sensor-state is used to get the
sensor state identified by the location code and the sensor
token. The librtas library provides an API
rtas_get_dynamic_sensor() which uses /dev/mem access for work
area allocation but is restricted under system lockdown.
This patch provides an interface with new ioctl
PAPR_DYNAMIC_SENSOR_IOC_GET to the papr-indices character
driver which executes this HCALL and copies the sensor state
in the user specified ioctl buffer.
Refer PAPR 7.3.19 ibm,get-dynamic-sensor-state for more
information on this RTAS call.
- User input parameters to the RTAS call: location code string
and the sensor token
Expose these interfaces to user space with a /dev/papr-indices
character device using the following programming model:
int fd = open("/dev/papr-indices", O_RDWR);
int ret = ioctl(fd, PAPR_DYNAMIC_SENSOR_IOC_GET,
struct papr_indices_io_block)
- The user space specifies input parameters in
papr_indices_io_block struct
- Returned state for the specified sensor is copied to
papr_indices_io_block.dynamic_param.state
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Tested-by: Sathvika Vasireddy <sv@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250416225743.596462-6-haren@linux.ibm.com
|
||
|
Haren Myneni
|
f60a3796f8 |
powerpc/pseries: Add ibm,set-dynamic-indicator RTAS call support
The RTAS call ibm,set-dynamic-indicator is used to set the new
indicator state identified by a location code. The current
implementation uses rtas_set_dynamic_indicator() API provided by
librtas library which allocates RMO buffer and issue this RTAS
call in the user space. But /dev/mem access by the user space
is prohibited under system lockdown.
This patch provides an interface with new ioctl
PAPR_DYNAMIC_INDICATOR_IOC_SET to the papr-indices character
driver and expose this interface to the user space that is
compatible with lockdown.
Refer PAPR 7.3.18 ibm,set-dynamic-indicator for more
information on this RTAS call.
- User input parameters to the RTAS call: location code
string, indicator token and new state
Expose these interfaces to user space with a /dev/papr-indices
character device using the following programming model:
int fd = open("/dev/papr-indices", O_RDWR);
int ret = ioctl(fd, PAPR_DYNAMIC_INDICATOR_IOC_SET,
struct papr_indices_io_block)
- The user space passes input parameters in papr_indices_io_block
struct
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Tested-by: Sathvika Vasireddy <sv@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250416225743.596462-5-haren@linux.ibm.com
|
||
|
Haren Myneni
|
6e9aec5446 |
powerpc/pseries: Add papr-indices char driver for ibm,get-indices
The RTAS call ibm,get-indices is used to obtain indices and
location codes for a specified indicator or sensor token. The
current implementation uses rtas_get_indices() API provided by
librtas library which allocates RMO buffer and issue this RTAS
call in the user space. But writable mapping /dev/mem access by
the user space is prohibited under system lockdown.
To overcome the restricted access in the user space, the kernel
provide interfaces to collect indices data from the hypervisor.
This patch adds papr-indices character driver and expose standard
interfaces such as open / ioctl/ read to user space in ways that
are compatible with lockdown.
PAPR (2.13 7.3.17 ibm,get-indices RTAS Call) describes the
following steps to retrieve all indices data:
- User input parameters to the RTAS call: sensor or indicator,
and indice type
- ibm,get-indices is sequence RTAS call which means has to issue
multiple times to get the entire list of indicators or sensors
of a particular type. The hypervisor expects the first RTAS call
with the sequence 1 and the subsequent calls with the sequence
number returned from the previous calls.
- The OS may not interleave calls to ibm,get-indices for different
indicator or sensor types. Means other RTAS calls with different
type should not be issued while the previous type sequence is in
progress. So collect the entire list of indices and copied to
buffer BLOB during ioctl() and expose this buffer to the user
space with the file descriptor.
- The hypervisor fills the work area with a specific format but
does not return the number of bytes written to the buffer.
Instead of parsing the data for each call to determine the data
length, copy the work area size (RTAS_GET_INDICES_BUF_SIZE) to
the buffer. Return work-area size of data to the user space for
each read() call.
Expose these interfaces to user space with a /dev/papr-indices
character device using the following programming model:
int devfd = open("/dev/papr-indices", O_RDONLY);
int fd = ioctl(devfd, PAPR_INDICES_IOC_GET,
struct papr_indices_io_block)
- Collect all indices data for the specified token to the buffer
char *buf = malloc(RTAS_GET_INDICES_BUF_SIZE);
length = read(fd, buf, RTAS_GET_INDICES_BUF_SIZE)
- RTAS_GET_INDICES_BUF_SIZE of data is returned to the user
space.
- The user space retrieves the indices and their location codes
from the buffer
- Should issue multiple read() calls until reaches the end of
BLOB buffer.
The read() should use the file descriptor obtained from ioctl to
get the data that is exposed to file descriptor. Implemented
support in librtas (rtas_get_indices()) for this new ABI for
system lockdown.
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Tested-by: Sathvika Vasireddy <sv@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250416225743.596462-4-haren@linux.ibm.com
|
||
|
Haren Myneni
|
ecc45d4f8c |
powerpc/pseries: Define common functions for RTAS sequence calls
The RTAS call can be normal where retrieves the data form the
hypervisor once or sequence based RTAS call which has to
issue multiple times until the complete data is obtained. For
some of these sequence RTAS calls, the OS should not interleave
calls with different input until the sequence is completed.
The data is collected for each call and copy to the buffer
for the entire sequence during ioctl() handle and then expose
this buffer to the user space with read() handle.
One such sequence RTAS call is ibm,get-vpd and its support is
already included in the current code. To add the similar support
for other sequence based calls, move the common functions in to
separate file and update papr_rtas_sequence struct with the
following callbacks so that RTAS call specific code will be
defined and executed to complete the sequence.
struct papr_rtas_sequence {
int error;
void params;
void (*begin) (struct papr_rtas_sequence *);
void (*end) (struct papr_rtas_sequence *);
const char * (*work) (struct papr_rtas_sequence *, size_t *);
};
params: Input parameters used to pass for RTAS call.
Begin: RTAS call specific function to initialize data
including work area allocation.
End: RTAS call specific function to free up resources
(free work area) after the sequence is completed.
Work: The actual RTAS call specific function which collects
the data from the hypervisor.
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Tested-by: Sathvika Vasireddy <sv@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250416225743.596462-2-haren@linux.ibm.com
|
||
|
Madhavan Srinivasan
|
3700976f2a |
powerpc: Add check to select PPC_RADIX_BROADCAST_TLBIE
Commit
|
||
|
Jiri Slaby (SUSE)
|
0a27ea384c |
irqdomain: Rename irq_get_default_host() to irq_get_default_domain()
Naming interrupt domains host is confusing at best and the irqdomain code uses both domain and host inconsistently. Therefore rename irq_get_default_host() to irq_get_default_domain(). Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/20250319092951.37667-4-jirislaby@kernel.org |
||
|
Linus Torvalds
|
7b667acd69 |
powerpc updates for 6.15
- Removal of support for IBM Cell Blades - SMP support for microwatt platform - Support for inline static calls on PPC32 - Enable pmu selftests for power11 platform - Enable hardware trace macro (HTM) hcall support - Support for limited address mode capability - Changes to RMA size from 512 MB to 768 MB to handle fadump - Misc fixes and cleanups Thanks to: Abhishek Dubey, Amit Machhiwal, Andreas Schwab, Arnd Bergmann, Athira Rajeev, Avnish Chouhan, Christophe Leroy, Disha Goel, Donet Tom, Gaurav Batra, Gautam Menghani, Hari Bathini, Kajol Jain, Kees Cook, Mahesh Salgaonkar, Michael Ellerman, Paul Mackerras, Ritesh Harjani (IBM), Sathvika Vasireddy, Segher Boessenkool, Sourabh Jain, Vaibhav Jain, Venkat Rao Bagalkote. -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEqX2DNAOgU8sBX3pRpnEsdPSHZJQFAmfjZnYACgkQpnEsdPSH ZJTmKg/+NGW7wyFY9d8Iai9ncYY7GSzsMSDTaan7qg0QWOd5gjHbsdbava7TM/DW 8p9XsC+17kSeftRNUjtc52bSN8Ei2gBdsXIagQG1alfB2X2e6wkNauifK+dz3Su6 usMEZZTO5R/jFDotFXNM1nsUj+8dvjnPgOUrji/P8k7PT5295wpza0hz1fy5SrOA hM5cliBP36UgFe5Efvgm4OUX2gQIhbc3stt9MVfymW/k0Mit5f41UIPuVGiTWowY s0cUJGkhxUlGXT3VfOVKuZfn4u9KMha7UCl9afSceJzXOdnUIKIbskui1VEv6cD/ iSIxi839uErAobFHlsLYprgYFciYLII3xe2qNZCA/ZxeIMS/Mm6xokESeWLhBnfa P7ke6l0z3GDtTvgI2eSeU9BdrVveF1NgbP9GYSKgT6gtw/kRRnxgHF8tzmLON5PT KXpQlzz8VuSBRtF2jnLFU89+FFwSA1bRUhDrp89HyYFqw1B5g4N7kFFTUJWHOuKS fwPGy+cveKehmCUBedeTRFqHvvqdwpD/WnPlQzCly3WxqdL8U/eTXYftMiAwuK28 ovLuSs3vRThKRQ8DnUa5oB0UGsjMpRV5LdvYkhw+x8mZKUR59oj4fx2ae4TtPakg dbAYuPPkCORdaSga/nV6vQgsLprFpcGX3dq6E19+BVBAY5D+1PE= =GFcj -----END PGP SIGNATURE----- Merge tag 'powerpc-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Madhavan Srinivasan: - Remove support for IBM Cell Blades - SMP support for microwatt platform - Support for inline static calls on PPC32 - Enable pmu selftests for power11 platform - Enable hardware trace macro (HTM) hcall support - Support for limited address mode capability - Changes to RMA size from 512 MB to 768 MB to handle fadump - Misc fixes and cleanups Thanks to Abhishek Dubey, Amit Machhiwal, Andreas Schwab, Arnd Bergmann, Athira Rajeev, Avnish Chouhan, Christophe Leroy, Disha Goel, Donet Tom, Gaurav Batra, Gautam Menghani, Hari Bathini, Kajol Jain, Kees Cook, Mahesh Salgaonkar, Michael Ellerman, Paul Mackerras, Ritesh Harjani (IBM), Sathvika Vasireddy, Segher Boessenkool, Sourabh Jain, Vaibhav Jain, and Venkat Rao Bagalkote. * tag 'powerpc-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (61 commits) powerpc/kexec: fix physical address calculation in clear_utlb_entry() crypto: powerpc: Mark ghashp8-ppc.o as an OBJECT_FILES_NON_STANDARD powerpc: Fix 'intra_function_call not a direct call' warning powerpc/perf: Fix ref-counting on the PMU 'vpa_pmu' KVM: PPC: Enable CAP_SPAPR_TCE_VFIO on pSeries KVM guests powerpc/prom_init: Fixup missing #size-cells on PowerBook6,7 powerpc/microwatt: Add SMP support powerpc: Define config option for processors with broadcast TLBIE powerpc/microwatt: Define an idle power-save function powerpc/microwatt: Device-tree updates powerpc/microwatt: Select COMMON_CLK in order to get the clock framework net: toshiba: Remove reference to PPC_IBM_CELL_BLADE net: spider_net: Remove powerpc Cell driver cpufreq: ppc_cbe: Remove powerpc Cell driver genirq: Remove IRQ_EDGE_EOI_HANDLER docs: Remove reference to removed CBE_CPUFREQ_SPU_GOVERNOR powerpc: Remove UDBG_RTAS_CONSOLE powerpc/io: Use standard barrier macros in io.c powerpc/io: Rename _insw_ns() etc. powerpc/io: Use generic raw accessors ... |
||
|
Paul Mackerras
|
3d45a3d0d2 |
powerpc: Define config option for processors with broadcast TLBIE
Power ISA v3.0 (and later) implementations in the Linux Compliancy Subset and lower are not required to implement broadcast TLBIE, and in fact Microwatt doesn't. To avoid the need to specify "disable_tlbie" on the kernel command line on SMP Microwatt systems, this defines a config option that asserts that the platform implements broadcast TLBIE. This option is selected by the pseries and powernv platforms, but not by microwatt. Note that this option is only relevant when the radix MMU is being used, so platforms without a radix MMU don't need it. Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/Z5xtvdozEfEmRyeI@thinks.paulus.ozlabs.org |
||
|
Al Viro
|
f9835fa147
|
make use of anon_inode_getfile_fmode()
["fallen through the cracks" misc stuff] A bunch of anon_inode_getfile() callers follow it with adjusting ->f_mode; we have a helper doing that now, so let's make use of it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Link: https://lore.kernel.org/r/20250118014434.GT1977892@ZenIV Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
Gaurav Batra
|
6aa989ab2b |
powerpc/pseries/iommu: memory notifier incorrectly adds TCEs for pmemory
iommu_mem_notifier() is invoked when RAM is dynamically added/removed. This notifier call is responsible to add/remove TCEs from the Dynamic DMA Window (DDW) when TCEs are pre-mapped. TCEs are pre-mapped only for RAM and not for persistent memory (pmemory). For DMA buffers in pmemory, TCEs are dynamically mapped when the device driver instructs to do so. The issue is 'daxctl' command is capable of adding pmemory as "System RAM" after LPAR boot. The command to do so is - daxctl reconfigure-device --mode=system-ram dax0.0 --force This will dynamically add pmemory range to LPAR RAM eventually invoking iommu_mem_notifier(). The address range of pmemory is way beyond the Max RAM that the LPAR can have. Which means, this range is beyond the DDW created for the device, at device initialization time. As a result when TCEs are pre-mapped for the pmemory range, by iommu_mem_notifier(), PHYP HCALL returns H_PARAMETER. This failed the command, daxctl, to add pmemory as RAM. The solution is to not pre-map TCEs for pmemory. Signed-off-by: Gaurav Batra <gbatra@linux.ibm.com> Tested-by: Donet Tom <donettom@linux.ibm.com> Reviewed-by: Donet Tom <donettom@linux.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250130183854.92258-1-gbatra@linux.ibm.com |
||
|
Gaurav Batra
|
67dfc11982 |
powerpc/pseries/iommu: create DDW for devices with DMA mask less than 64-bits
Starting with PAPR level 2.13, platform supports placing PHB in limited address mode. Devices that support DMA masks less that 64-bit but greater than 32-bits are placed in limited address mode. In this mode, the starting DMA address returned by the DDW is 4GB. When the device driver calls dma_supported, with mask less then 64-bit, the PowerPC IOMMU driver places PHB in the Limited Addressing Mode before creating DDW. Signed-off-by: Gaurav Batra <gbatra@linux.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250108164814.73250-1-gbatra@linux.ibm.com |
||
|
Abhishek Dubey
|
81c3d637c3 |
powerpc/pseries: Export hardware trace macro dump via debugfs
This patch adds debugfs interface to export Hardware Trace Macro (HTM) function data in a LPAR. New hypervisor call "H_HTM" has been defined to setup, configure, control and dump the HTM data. This patch supports only dumping of HTM data in a LPAR. New debugfs folder called "htmdump" has been added under /sys/kernel/debug/arch path which contains files need to pass required parameters for the H_HTM dump function. New Kconfig option called "CONFIG_HTMDUMP" is added in platform/pseries for the same. With this module loaded, list of files in debugfs path /sys/kernel/debug/powerpc/htmdump coreindexonchip htmtype nodalchipindex nodeindex trace Signed-off-by: Abhishek Dubey <adubey@linux.ibm.com> Co-developed-by: Madhavan Srinivasan <maddy@linux.ibm.com> Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250113164039.302017-2-adubey@linux.ibm.com |
||
|
Linus Torvalds
|
aa5216a2b0 |
powerpc fixes for 6.14 #2
- Fix to handle PE state in pseries_eeh_get_state() - Handle unset of tce window if it was never set Thanks to: Narayana Murty N, Ritesh Harjani (IBM), Shivaprasad G Bhat, Vaishnavi Bhat. -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEqX2DNAOgU8sBX3pRpnEsdPSHZJQFAmeaLBEACgkQpnEsdPSH ZJQ/sxAAh8iKF6Rnzw3xn5uURua1+26osK2H1XgU7be0A9vlMWLBaqCzOkleNBsF xMd+MBIbCGkv1LrYYLXLzc4Dt4B3lEfTA39sWlbGOJ+YAHhXqUAdSUtvUFeO/bSk svOeDYpVvUnOh2wXdPEQNFV1yKdVmIub7QdfFja9lvW9+d/DpBXnsEL6h7ToMrdl jTGICR32ieuhcdYJSm/B2LUXwqcga1oUBE0oMEg4g8f3as5pi1s7yE7kDhOj0MnH u7NFlOnThd+i/jX25/J2lwUZDB6ZHgIfZdHiQAM3/z7jbV736R9jK6tT98EFXZii n0CyhHyvMxLdMzneAfY5BDBahZEPYQSVXm4woCboJQUlCJbsB6PX9hX7kiGMJelo eSAs+/wPcnTG+E29lpMsXXTIf6lZkGar32tfuF76ZBHJs1D5LJKhO51wCZauBFqn dkLY0XiQLTRJxfmw0zwdNLKiKeyUYOgmfRUSvpRTjtrgdIZ5uKQ9FX7mg91fI2hr Cv8KUVWVcnHYrgPulUSSVmYZrfd2FhwZlc1V224l4Flh9ODZALf1ldH6VhqhJAeL waDDhldTgNlsZxUbtUZlDkyGbIO0IVfJTXBr7UGggLkUCJfEdPvDSJNAReOGfuWv pIszzk4oDv22/Lnk/zT0e3ZL++2rDcXjIjVFJQ/hfKfAAiP4myw= =rhA9 -----END PGP SIGNATURE----- Merge tag 'powerpc-6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Madhavan Srinivasan: - Fix to handle PE state in pseries_eeh_get_state() - Handle unset of tce window if it was never set Thanks to Narayana Murty N, Ritesh Harjani (IBM), Shivaprasad G Bhat, and Vaishnavi Bhat. * tag 'powerpc-6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/pseries/iommu: Don't unset window if it was never set powerpc/pseries/eeh: Fix get PE state translation |
||
|
Joel Granados
|
1751f872cc |
treewide: const qualify ctl_tables where applicable
Add the const qualifier to all the ctl_tables in the tree except for
watchdog_hardlockup_sysctl, memory_allocation_profiling_sysctls,
loadpin_sysctl_table and the ones calling register_net_sysctl (./net,
drivers/inifiniband dirs). These are special cases as they use a
registration function with a non-const qualified ctl_table argument or
modify the arrays before passing them on to the registration function.
Constifying ctl_table structs will prevent the modification of
proc_handler function pointers as the arrays would reside in .rodata.
This is made possible after commit
|
||
|
Linus Torvalds
|
c159dfbdd4 |
Mainly individually changelogged singleton patches. The patch series in
this pull are:
- "lib min_heap: Improve min_heap safety, testing, and documentation"
from Kuan-Wei Chiu provides various tightenings to the min_heap library
code.
- "xarray: extract __xa_cmpxchg_raw" from Tamir Duberstein preforms some
cleanup and Rust preparation in the xarray library code.
- "Update reference to include/asm-<arch>" from Geert Uytterhoeven fixes
pathnames in some code comments.
- "Converge on using secs_to_jiffies()" from Easwar Hariharan uses the
new secs_to_jiffies() in various places where that is appropriate.
- "ocfs2, dlmfs: convert to the new mount API" from Eric Sandeen
switches two filesystems to the new mount API.
- "Convert ocfs2 to use folios" from Matthew Wilcox does that.
- "Remove get_task_comm() and print task comm directly" from Yafang Shao
removes now-unneeded calls to get_task_comm() in various places.
- "squashfs: reduce memory usage and update docs" from Phillip Lougher
implements some memory savings in squashfs and performs some
maintainability work.
- "lib: clarify comparison function requirements" from Kuan-Wei Chiu
tightens the sort code's behaviour and adds some maintenance work.
- "nilfs2: protect busy buffer heads from being force-cleared" from
Ryusuke Konishi fixes an issues in nlifs when the fs is presented with a
corrupted image.
- "nilfs2: fix kernel-doc comments for function return values" from
Ryusuke Konishi fixes some nilfs kerneldoc.
- "nilfs2: fix issues with rename operations" from Ryusuke Konishi
addresses some nilfs BUG_ONs which syzbot was able to trigger.
- "minmax.h: Cleanups and minor optimisations" from David Laight
does some maintenance work on the min/max library code.
- "Fixes and cleanups to xarray" from Kemeng Shi does maintenance work
on the xarray library code.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZ5SP5QAKCRDdBJ7gKXxA
jqN7AQChvwXGG43n4d5SDiA/rH7ddvowQcDqhC9cAMJ1ReR7qwEA8/LIWDE4PdMX
mJnaZ1/ibpEpearrChCViApQtcyEGQI=
=ti4E
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2025-01-24-23-16' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"Mainly individually changelogged singleton patches. The patch series
in this pull are:
- "lib min_heap: Improve min_heap safety, testing, and documentation"
from Kuan-Wei Chiu provides various tightenings to the min_heap
library code
- "xarray: extract __xa_cmpxchg_raw" from Tamir Duberstein preforms
some cleanup and Rust preparation in the xarray library code
- "Update reference to include/asm-<arch>" from Geert Uytterhoeven
fixes pathnames in some code comments
- "Converge on using secs_to_jiffies()" from Easwar Hariharan uses
the new secs_to_jiffies() in various places where that is
appropriate
- "ocfs2, dlmfs: convert to the new mount API" from Eric Sandeen
switches two filesystems to the new mount API
- "Convert ocfs2 to use folios" from Matthew Wilcox does that
- "Remove get_task_comm() and print task comm directly" from Yafang
Shao removes now-unneeded calls to get_task_comm() in various
places
- "squashfs: reduce memory usage and update docs" from Phillip
Lougher implements some memory savings in squashfs and performs
some maintainability work
- "lib: clarify comparison function requirements" from Kuan-Wei Chiu
tightens the sort code's behaviour and adds some maintenance work
- "nilfs2: protect busy buffer heads from being force-cleared" from
Ryusuke Konishi fixes an issues in nlifs when the fs is presented
with a corrupted image
- "nilfs2: fix kernel-doc comments for function return values" from
Ryusuke Konishi fixes some nilfs kerneldoc
- "nilfs2: fix issues with rename operations" from Ryusuke Konishi
addresses some nilfs BUG_ONs which syzbot was able to trigger
- "minmax.h: Cleanups and minor optimisations" from David Laight does
some maintenance work on the min/max library code
- "Fixes and cleanups to xarray" from Kemeng Shi does maintenance
work on the xarray library code"
* tag 'mm-nonmm-stable-2025-01-24-23-16' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (131 commits)
ocfs2: use str_yes_no() and str_no_yes() helper functions
include/linux/lz4.h: add some missing macros
Xarray: use xa_mark_t in xas_squash_marks() to keep code consistent
Xarray: remove repeat check in xas_squash_marks()
Xarray: distinguish large entries correctly in xas_split_alloc()
Xarray: move forward index correctly in xas_pause()
Xarray: do not return sibling entries from xas_find_marked()
ipc/util.c: complete the kernel-doc function descriptions
gcov: clang: use correct function param names
latencytop: use correct kernel-doc format for func params
minmax.h: remove some #defines that are only expanded once
minmax.h: simplify the variants of clamp()
minmax.h: move all the clamp() definitions after the min/max() ones
minmax.h: use BUILD_BUG_ON_MSG() for the lo < hi test in clamp()
minmax.h: reduce the #define expansion of min(), max() and clamp()
minmax.h: update some comments
minmax.h: add whitespace around operators and after commas
nilfs2: do not update mtime of renamed directory that is not moved
nilfs2: handle errors that nilfs_prepare_chunk() may return
CREDITS: fix spelling mistake
...
|
||
|
Shivaprasad G Bhat
|
17391cb261 |
powerpc/pseries/iommu: Don't unset window if it was never set
On pSeries, when user attempts to use the same vfio container used by
different iommu group, the spapr_tce_set_window() returns -EPERM
and the subsequent cleanup leads to the below crash.
Kernel attempted to read user page (308) - exploit attempt?
BUG: Kernel NULL pointer dereference on read at 0x00000308
Faulting instruction address: 0xc0000000001ce358
Oops: Kernel access of bad area, sig: 11 [#1]
NIP: c0000000001ce358 LR: c0000000001ce05c CTR: c00000000005add0
<snip>
NIP [c0000000001ce358] spapr_tce_unset_window+0x3b8/0x510
LR [c0000000001ce05c] spapr_tce_unset_window+0xbc/0x510
Call Trace:
spapr_tce_unset_window+0xbc/0x510 (unreliable)
tce_iommu_attach_group+0x24c/0x340 [vfio_iommu_spapr_tce]
vfio_container_attach_group+0xec/0x240 [vfio]
vfio_group_fops_unl_ioctl+0x548/0xb00 [vfio]
sys_ioctl+0x754/0x1580
system_call_exception+0x13c/0x330
system_call_vectored_common+0x15c/0x2ec
<snip>
--- interrupt: 3000
Fix this by having null check for the tbl passed to the
spapr_tce_unset_window().
Fixes:
|
||
|
Narayana Murty N
|
11b9355900 |
powerpc/pseries/eeh: Fix get PE state translation
The PE Reset State "0" returned by RTAS calls
"ibm_read_slot_reset_[state|state2]" indicates that the reset is
deactivated and the PE is in a state where MMIO and DMA are allowed.
However, the current implementation of "pseries_eeh_get_state()" does
not reflect this, causing drivers to incorrectly assume that MMIO and
DMA operations cannot be resumed.
The userspace drivers as a part of EEH recovery using VFIO ioctls fail
to detect when the recovery process is complete. The VFIO_EEH_PE_GET_STATE
ioctl does not report the expected EEH_PE_STATE_NORMAL state, preventing
userspace drivers from functioning properly on pseries systems.
The patch addresses this issue by updating 'pseries_eeh_get_state()'
to include "EEH_STATE_MMIO_ENABLED" and "EEH_STATE_DMA_ENABLED" in
the result mask for PE Reset State "0". This ensures correct state
reporting to the callers, aligning the behavior with the PAPR specification
and fixing the bug in EEH recovery for VFIO user workflows.
Fixes:
|
||
|
Easwar Hariharan
|
1969392adf |
powerpc/papr_scm: convert timeouts to secs_to_jiffies()
Commit
|
||
|
Gaurav Batra
|
8f70caad82 |
powerpc/pseries/iommu: IOMMU incorrectly marks MMIO range in DDW
Power Hypervisor can possibily allocate MMIO window intersecting with
Dynamic DMA Window (DDW) range, which is over 32-bit addressing.
These MMIO pages needs to be marked as reserved so that IOMMU doesn't map
DMA buffers in this range.
The current code is not marking these pages correctly which is resulting
in LPAR to OOPS while booting. The stack is at below
BUG: Unable to handle kernel data access on read at 0xc00800005cd40000
Faulting instruction address: 0xc00000000005cdac
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
Modules linked in: af_packet rfkill ibmveth(X) lpfc(+) nvmet_fc nvmet nvme_keyring crct10dif_vpmsum nvme_fc nvme_fabrics nvme_core be2net(+) nvme_auth rtc_generic nfsd auth_rpcgss nfs_acl lockd grace sunrpc fuse configfs ip_tables x_tables xfs libcrc32c dm_service_time ibmvfc(X) scsi_transport_fc vmx_crypto gf128mul crc32c_vpmsum dm_mirror dm_region_hash dm_log dm_multipath dm_mod sd_mod scsi_dh_emc scsi_dh_rdac scsi_dh_alua t10_pi crc64_rocksoft_generic crc64_rocksoft sg crc64 scsi_mod
Supported: Yes, External
CPU: 8 PID: 241 Comm: kworker/8:1 Kdump: loaded Not tainted 6.4.0-150600.23.14-default #1 SLE15-SP6 b44ee71c81261b9e4bab5e0cde1f2ed891d5359b
Hardware name: IBM,9080-M9S POWER9 (raw) 0x4e2103 0xf000005 of:IBM,FW950.B0 (VH950_149) hv:phyp pSeries
Workqueue: events work_for_cpu_fn
NIP: c00000000005cdac LR: c00000000005e830 CTR: 0000000000000000
REGS: c00001400c9ff770 TRAP: 0300 Not tainted (6.4.0-150600.23.14-default)
MSR: 800000000280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 24228448 XER: 00000001
CFAR: c00000000005cdd4 DAR: c00800005cd40000 DSISR: 40000000 IRQMASK: 0
GPR00: c00000000005e830 c00001400c9ffa10 c000000001987d00 c00001400c4fe800
GPR04: 0000080000000000 0000000000000001 0000000004000000 0000000000800000
GPR08: 0000000004000000 0000000000000001 c00800005cd40000 ffffffffffffffff
GPR12: 0000000084228882 c00000000a4c4f00 0000000000000010 0000080000000000
GPR16: c00001400c4fe800 0000000004000000 0800000000000000 c00000006088b800
GPR20: c00001401a7be980 c00001400eff3800 c000000002a2da68 000000000000002b
GPR24: c0000000026793a8 c000000002679368 000000000000002a c0000000026793c8
GPR28: 000008007effffff 0000080000000000 0000000000800000 c00001400c4fe800
NIP [c00000000005cdac] iommu_table_reserve_pages+0xac/0x100
LR [c00000000005e830] iommu_init_table+0x80/0x1e0
Call Trace:
[c00001400c9ffa10] [c00000000005e810] iommu_init_table+0x60/0x1e0 (unreliable)
[c00001400c9ffa90] [c00000000010356c] iommu_bypass_supported_pSeriesLP+0x9cc/0xe40
[c00001400c9ffc30] [c00000000005c300] dma_iommu_dma_supported+0xf0/0x230
[c00001400c9ffcb0] [c00000000024b0c4] dma_supported+0x44/0x90
[c00001400c9ffcd0] [c00000000024b14c] dma_set_mask+0x3c/0x80
[c00001400c9ffd00] [c0080000555b715c] be_probe+0xc4/0xb90 [be2net]
[c00001400c9ffdc0] [c000000000986f3c] local_pci_probe+0x6c/0x110
[c00001400c9ffe40] [c000000000188f28] work_for_cpu_fn+0x38/0x60
[c00001400c9ffe70] [c00000000018e454] process_one_work+0x314/0x620
[c00001400c9fff10] [c00000000018f280] worker_thread+0x2b0/0x620
[c00001400c9fff90] [c00000000019bb18] kthread+0x148/0x150
[c00001400c9fffe0] [c00000000000ded8] start_kernel_thread+0x14/0x18
There are 2 issues in the code
1. The index is "int" while the address is "unsigned long". This results in
negative value when setting the bitmap.
2. The DMA offset is page shifted but the MMIO range is used as-is (64-bit
address). MMIO address needs to be page shifted as well.
Fixes:
|
||
|
Yang Li
|
e4a4565489 |
powerpc/machdep: Remove duplicated include in svm.c
The header files linux/mem_encrypt.h is included twice in svm.c, so one inclusion of each can be removed. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=11750 Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20241107010259.46308-1-yang.lee@linux.alibaba.com |
||
|
Linus Torvalds
|
42d9e8b7cc |
powerpc updates for 6.13
- Rework kfence support for the HPT MMU to work on systems with >= 16TB of RAM.
- Remove the powerpc "maple" platform, used by the "Yellow Dog Powerstation".
- Add support for DYNAMIC_FTRACE_WITH_CALL_OPS,
DYNAMIC_FTRACE_WITH_DIRECT_CALLS & BPF Trampolines.
- Add support for running KVM nested guests on Power11.
- Other small features, cleanups and fixes.
Thanks to: Amit Machhiwal, Arnd Bergmann, Christophe Leroy, Costa Shulyupin,
David Hunter, David Wang, Disha Goel, Gautam Menghani, Geert Uytterhoeven,
Hari Bathini, Julia Lawall, Kajol Jain, Keith Packard, Lukas Bulwahn, Madhavan
Srinivasan, Markus Elfring, Michal Suchanek, Ming Lei, Mukesh Kumar Chaurasiya,
Nathan Chancellor, Naveen N Rao, Nicholas Piggin, Nysal Jan K.A, Paulo Miguel
Almeida, Pavithra Prakash, Ritesh Harjani (IBM), Rob Herring (Arm), Sachin P
Bappalige, Shen Lichuan, Simon Horman, Sourabh Jain, Thomas Weißschuh, Thorsten
Blum, Thorsten Leemhuis, Venkat Rao Bagalkote, Zhang Zekun,
zhang jiao.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRjvi15rv0TSTaE+SIF0oADX8seIQUCZ0Fi5AAKCRAF0oADX8se
IeI0AQCAkNWRYzGNzPM6aMwDpq5qdeZzvp0rZxuNsRSnIKJlxAD+PAOxOietgjbQ
Lxt3oizg+UcH/304Y/iyT8IrwI4n+gE=
=xNtu
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Rework kfence support for the HPT MMU to work on systems with >= 16TB
of RAM.
- Remove the powerpc "maple" platform, used by the "Yellow Dog
Powerstation".
- Add support for DYNAMIC_FTRACE_WITH_CALL_OPS,
DYNAMIC_FTRACE_WITH_DIRECT_CALLS & BPF Trampolines.
- Add support for running KVM nested guests on Power11.
- Other small features, cleanups and fixes.
Thanks to Amit Machhiwal, Arnd Bergmann, Christophe Leroy, Costa
Shulyupin, David Hunter, David Wang, Disha Goel, Gautam Menghani, Geert
Uytterhoeven, Hari Bathini, Julia Lawall, Kajol Jain, Keith Packard,
Lukas Bulwahn, Madhavan Srinivasan, Markus Elfring, Michal Suchanek,
Ming Lei, Mukesh Kumar Chaurasiya, Nathan Chancellor, Naveen N Rao,
Nicholas Piggin, Nysal Jan K.A, Paulo Miguel Almeida, Pavithra Prakash,
Ritesh Harjani (IBM), Rob Herring (Arm), Sachin P Bappalige, Shen
Lichuan, Simon Horman, Sourabh Jain, Thomas Weißschuh, Thorsten Blum,
Thorsten Leemhuis, Venkat Rao Bagalkote, Zhang Zekun, and zhang jiao.
* tag 'powerpc-6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (89 commits)
EDAC/powerpc: Remove PPC_MAPLE drivers
powerpc/perf: Add per-task/process monitoring to vpa_pmu driver
powerpc/kvm: Add vpa latency counters to kvm_vcpu_arch
docs: ABI: sysfs-bus-event_source-devices-vpa-pmu: Document sysfs event format entries for vpa_pmu
powerpc/perf: Add perf interface to expose vpa counters
MAINTAINERS: powerpc: Mark Maddy as "M"
powerpc/Makefile: Allow overriding CPP
powerpc-km82xx.c: replace of_node_put() with __free
ps3: Correct some typos in comments
powerpc/kexec: Fix return of uninitialized variable
macintosh: Use common error handling code in via_pmu_led_init()
powerpc/powermac: Use of_property_match_string() in pmac_has_backlight_type()
powerpc: remove dead config options for MPC85xx platform support
powerpc/xive: Use cpumask_intersects()
selftests/powerpc: Remove the path after initialization.
powerpc/xmon: symbol lookup length fixed
powerpc/ep8248e: Use %pa to format resource_size_t
powerpc/ps3: Reorganize kerneldoc parameter names
KVM: PPC: Book3S HV: Fix kmv -> kvm typo
powerpc/sstep: make emulate_vsx_load and emulate_vsx_store static
...
|
||
|
Linus Torvalds
|
5c00ff742b |
- The series "zram: optimal post-processing target selection" from
Sergey Senozhatsky improves zram's post-processing selection algorithm.
This leads to improved memory savings.
- Wei Yang has gone to town on the mapletree code, contributing several
series which clean up the implementation:
- "refine mas_mab_cp()"
- "Reduce the space to be cleared for maple_big_node"
- "maple_tree: simplify mas_push_node()"
- "Following cleanup after introduce mas_wr_store_type()"
- "refine storing null"
- The series "selftests/mm: hugetlb_fault_after_madv improvements" from
David Hildenbrand fixes this selftest for s390.
- The series "introduce pte_offset_map_{ro|rw}_nolock()" from Qi Zheng
implements some rationaizations and cleanups in the page mapping code.
- The series "mm: optimize shadow entries removal" from Shakeel Butt
optimizes the file truncation code by speeding up the handling of shadow
entries.
- The series "Remove PageKsm()" from Matthew Wilcox completes the
migration of this flag over to being a folio-based flag.
- The series "Unify hugetlb into arch_get_unmapped_area functions" from
Oscar Salvador implements a bunch of consolidations and cleanups in the
hugetlb code.
- The series "Do not shatter hugezeropage on wp-fault" from Dev Jain
takes away the wp-fault time practice of turning a huge zero page into
small pages. Instead we replace the whole thing with a THP. More
consistent cleaner and potentiall saves a large number of pagefaults.
- The series "percpu: Add a test case and fix for clang" from Andy
Shevchenko enhances and fixes the kernel's built in percpu test code.
- The series "mm/mremap: Remove extra vma tree walk" from Liam Howlett
optimizes mremap() by avoiding doing things which we didn't need to do.
- The series "Improve the tmpfs large folio read performance" from
Baolin Wang teaches tmpfs to copy data into userspace at the folio size
rather than as individual pages. A 20% speedup was observed.
- The series "mm/damon/vaddr: Fix issue in
damon_va_evenly_split_region()" fro Zheng Yejian fixes DAMON splitting.
- The series "memcg-v1: fully deprecate charge moving" from Shakeel Butt
removes the long-deprecated memcgv2 charge moving feature.
- The series "fix error handling in mmap_region() and refactor" from
Lorenzo Stoakes cleanup up some of the mmap() error handling and
addresses some potential performance issues.
- The series "x86/module: use large ROX pages for text allocations" from
Mike Rapoport teaches x86 to use large pages for read-only-execute
module text.
- The series "page allocation tag compression" from Suren Baghdasaryan
is followon maintenance work for the new page allocation profiling
feature.
- The series "page->index removals in mm" from Matthew Wilcox remove
most references to page->index in mm/. A slow march towards shrinking
struct page.
- The series "damon/{self,kunit}tests: minor fixups for DAMON debugfs
interface tests" from Andrew Paniakin performs maintenance work for
DAMON's self testing code.
- The series "mm: zswap swap-out of large folios" from Kanchana Sridhar
improves zswap's batching of compression and decompression. It is a
step along the way towards using Intel IAA hardware acceleration for
this zswap operation.
- The series "kasan: migrate the last module test to kunit" from
Sabyrzhan Tasbolatov completes the migration of the KASAN built-in tests
over to the KUnit framework.
- The series "implement lightweight guard pages" from Lorenzo Stoakes
permits userapace to place fault-generating guard pages within a single
VMA, rather than requiring that multiple VMAs be created for this.
Improved efficiencies for userspace memory allocators are expected.
- The series "memcg: tracepoint for flushing stats" from JP Kobryn uses
tracepoints to provide increased visibility into memcg stats flushing
activity.
- The series "zram: IDLE flag handling fixes" from Sergey Senozhatsky
fixes a zram buglet which potentially affected performance.
- The series "mm: add more kernel parameters to control mTHP" from
Maíra Canal enhances our ability to control/configuremultisize THP from
the kernel boot command line.
- The series "kasan: few improvements on kunit tests" from Sabyrzhan
Tasbolatov has a couple of fixups for the KASAN KUnit tests.
- The series "mm/list_lru: Split list_lru lock into per-cgroup scope"
from Kairui Song optimizes list_lru memory utilization when lockdep is
enabled.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZzwFqgAKCRDdBJ7gKXxA
jkeuAQCkl+BmeYHE6uG0hi3pRxkupseR6DEOAYIiTv0/l8/GggD/Z3jmEeqnZaNq
xyyenpibWgUoShU2wZ/Ha8FE5WDINwg=
=JfWR
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2024-11-18-19-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- The series "zram: optimal post-processing target selection" from
Sergey Senozhatsky improves zram's post-processing selection
algorithm. This leads to improved memory savings.
- Wei Yang has gone to town on the mapletree code, contributing several
series which clean up the implementation:
- "refine mas_mab_cp()"
- "Reduce the space to be cleared for maple_big_node"
- "maple_tree: simplify mas_push_node()"
- "Following cleanup after introduce mas_wr_store_type()"
- "refine storing null"
- The series "selftests/mm: hugetlb_fault_after_madv improvements" from
David Hildenbrand fixes this selftest for s390.
- The series "introduce pte_offset_map_{ro|rw}_nolock()" from Qi Zheng
implements some rationaizations and cleanups in the page mapping
code.
- The series "mm: optimize shadow entries removal" from Shakeel Butt
optimizes the file truncation code by speeding up the handling of
shadow entries.
- The series "Remove PageKsm()" from Matthew Wilcox completes the
migration of this flag over to being a folio-based flag.
- The series "Unify hugetlb into arch_get_unmapped_area functions" from
Oscar Salvador implements a bunch of consolidations and cleanups in
the hugetlb code.
- The series "Do not shatter hugezeropage on wp-fault" from Dev Jain
takes away the wp-fault time practice of turning a huge zero page
into small pages. Instead we replace the whole thing with a THP. More
consistent cleaner and potentiall saves a large number of pagefaults.
- The series "percpu: Add a test case and fix for clang" from Andy
Shevchenko enhances and fixes the kernel's built in percpu test code.
- The series "mm/mremap: Remove extra vma tree walk" from Liam Howlett
optimizes mremap() by avoiding doing things which we didn't need to
do.
- The series "Improve the tmpfs large folio read performance" from
Baolin Wang teaches tmpfs to copy data into userspace at the folio
size rather than as individual pages. A 20% speedup was observed.
- The series "mm/damon/vaddr: Fix issue in
damon_va_evenly_split_region()" fro Zheng Yejian fixes DAMON
splitting.
- The series "memcg-v1: fully deprecate charge moving" from Shakeel
Butt removes the long-deprecated memcgv2 charge moving feature.
- The series "fix error handling in mmap_region() and refactor" from
Lorenzo Stoakes cleanup up some of the mmap() error handling and
addresses some potential performance issues.
- The series "x86/module: use large ROX pages for text allocations"
from Mike Rapoport teaches x86 to use large pages for
read-only-execute module text.
- The series "page allocation tag compression" from Suren Baghdasaryan
is followon maintenance work for the new page allocation profiling
feature.
- The series "page->index removals in mm" from Matthew Wilcox remove
most references to page->index in mm/. A slow march towards shrinking
struct page.
- The series "damon/{self,kunit}tests: minor fixups for DAMON debugfs
interface tests" from Andrew Paniakin performs maintenance work for
DAMON's self testing code.
- The series "mm: zswap swap-out of large folios" from Kanchana Sridhar
improves zswap's batching of compression and decompression. It is a
step along the way towards using Intel IAA hardware acceleration for
this zswap operation.
- The series "kasan: migrate the last module test to kunit" from
Sabyrzhan Tasbolatov completes the migration of the KASAN built-in
tests over to the KUnit framework.
- The series "implement lightweight guard pages" from Lorenzo Stoakes
permits userapace to place fault-generating guard pages within a
single VMA, rather than requiring that multiple VMAs be created for
this. Improved efficiencies for userspace memory allocators are
expected.
- The series "memcg: tracepoint for flushing stats" from JP Kobryn uses
tracepoints to provide increased visibility into memcg stats flushing
activity.
- The series "zram: IDLE flag handling fixes" from Sergey Senozhatsky
fixes a zram buglet which potentially affected performance.
- The series "mm: add more kernel parameters to control mTHP" from
Maíra Canal enhances our ability to control/configuremultisize THP
from the kernel boot command line.
- The series "kasan: few improvements on kunit tests" from Sabyrzhan
Tasbolatov has a couple of fixups for the KASAN KUnit tests.
- The series "mm/list_lru: Split list_lru lock into per-cgroup scope"
from Kairui Song optimizes list_lru memory utilization when lockdep
is enabled.
* tag 'mm-stable-2024-11-18-19-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (215 commits)
cma: enforce non-zero pageblock_order during cma_init_reserved_mem()
mm/kfence: add a new kunit test test_use_after_free_read_nofault()
zram: fix NULL pointer in comp_algorithm_show()
memcg/hugetlb: add hugeTLB counters to memcg
vmstat: call fold_vm_zone_numa_events() before show per zone NUMA event
mm: mmap_lock: check trace_mmap_lock_$type_enabled() instead of regcount
zram: ZRAM_DEF_COMP should depend on ZRAM
MAINTAINERS/MEMORY MANAGEMENT: add document files for mm
Docs/mm/damon: recommend academic papers to read and/or cite
mm: define general function pXd_init()
kmemleak: iommu/iova: fix transient kmemleak false positive
mm/list_lru: simplify the list_lru walk callback function
mm/list_lru: split the lock to per-cgroup scope
mm/list_lru: simplify reparenting and initial allocation
mm/list_lru: code clean up for reparenting
mm/list_lru: don't export list_lru_add
mm/list_lru: don't pass unnecessary key parameters
kasan: add kunit tests for kmalloc_track_caller, kmalloc_node_track_caller
kasan: change kasan_atomics kunit test as KUNIT_CASE_SLOW
kasan: use EXPORT_SYMBOL_IF_KUNIT to export symbols
...
|
||
|
Linus Torvalds
|
51ae62a12c |
dma-mapping updates for Linux 6.13
- improve the DMA API tracing code (Sean Anderson) - misc cleanups (Christoph Hellwig, Sui Jingfeng) - fix pointer abuse when finding the shared DMA pool (Geert Uytterhoeven) - fix a deadlock in dma-debug (Levi Yun) -----BEGIN PGP SIGNATURE----- iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAmc8xN8LHGhjaEBsc3Qu ZGUACgkQD55TZVIEUYNwEBAAtd0zTiNuEUklY6YtZ7l/Zaudibmq1klHLGAQZEa9 J4P2zzJ6xTkUblq/aVmFUQmf+vuuszjHIrrXnL3tAulSQKxS5Zj3Cci4cW4IAfBn GXB3OTR2lgXSk+8sulgiwc1AA8xgIFJJgZDTni1WdiW9LwLvUyYI1XNVAwCYOM2J HS2QxIySm3eg23F5bRz+Xl3LQlWYlHkMHryqKloHWIqchmVpYlYbj7uBMjAH4FKz l3zhd9pZSp9w5NNCp2Y/d81XdOUSjcYSR1gUotLzmW0Sj3YjnKXKdjjlPrj3zimb 9EhgdalnpVrJ4Nr7MmpSUEbTVs+hBjXDoxTnnBRlKEl5aIKqceCrSBvoP70ygbkf KRqNS4ZxKe59cfnWAZQVcg8g01TetCoJR6QyGaoTE9Lz+9cPl2xAwyFmcYN2w/Cp qs0ZEFiNpqLAN5zwR/Pakz5YgIA/3N5MW0d9X9yEH9l4+HUMxWIF/qvThBSsGswT EmVUQqPpEzGJrcNYgC1UsEBltGmle02BwcoFEdMr7bzldW7yIpoDEOkKkBM3JFF9 vgkpAkZGA5j4VMSkSwOrhi1rI0XAoImtJeM0wqhLtpXgQDjrMd3DaW6by6uUeH5x DcXf6qVOAsB04je9JkHh9I4BXVrWC01MSgFdjfQRl9gktn7970YFswG4ksYAwxU6 xHQ= =ivZc -----END PGP SIGNATURE----- Merge tag 'dma-mapping-6.13-2024-11-19' of git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping updates from Christoph Hellwig: - improve the DMA API tracing code (Sean Anderson) - misc cleanups (Christoph Hellwig, Sui Jingfeng) - fix pointer abuse when finding the shared DMA pool (Geert Uytterhoeven) - fix a deadlock in dma-debug (Levi Yun) * tag 'dma-mapping-6.13-2024-11-19' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: save base/size instead of pointer to shared DMA pool dma-mapping: fix swapped dir/flags arguments to trace_dma_alloc_sgt_err dma-mapping: drop unneeded includes from dma-mapping.h dma-mapping: trace more error paths dma-mapping: use trace_dma_alloc for dma_alloc* instead of using trace_dma_map dma-mapping: trace dma_alloc/free direction dma-mapping: use macros to define events in a class dma-mapping: remove an outdated comment from dma-map-ops.h dma-debug: remove DMA_API_DEBUG_SG dma-debug: store a phys_addr_t in struct dma_debug_entry dma-debug: fix a possible deadlock on radix_lock |
||
|
Linus Torvalds
|
e6de688e93 |
Devicetree updates for v6.13:
Bindings:
- Enable dtc "interrupt_provider" warnings for binding examples.
Fix the warnings in fsl,mu-msi and ti,sci-inta due to this.
- Convert zii,rave-sp-wdt, zii,rave-sp-pwrbutton, and
altr,fpga-passive-serial to DT schema format
- Add some documentation on the different forms of YAML text blocks
which are a constant source of review comments
- Fix some schema errors in constraints for arrays
- Add compatibles for qcom,sar2130p-pdc and onnn,adt7462
DT core:
- Allow overlay kunit tests to run CONFIG_OF_OVERLAY=n
- Add some warnings on deprecated address handling
- Rework early_init_dt_scan() so the arch can pass in the phys address
of the DTB as __pa() is not always valid to use. This fixes a warning
for arm64 with kexec.
- Add and use some new DT graph iterators for iterating over ports and
endpoints
- Rework reserved-memory handling to be sized dynamically for fixed
regions
- Optimize of_modalias() to avoid a strlen() call
- Constify struct device_node and property pointers where ever possible
-----BEGIN PGP SIGNATURE-----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=NCYS
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"Bindings:
- Enable dtc "interrupt_provider" warnings for binding examples. Fix
the warnings in fsl,mu-msi and ti,sci-inta due to this.
- Convert zii,rave-sp-wdt, zii,rave-sp-pwrbutton, and
altr,fpga-passive-serial to DT schema format
- Add some documentation on the different forms of YAML text blocks
which are a constant source of review comments
- Fix some schema errors in constraints for arrays
- Add compatibles for qcom,sar2130p-pdc and onnn,adt7462
DT core:
- Allow overlay kunit tests to run CONFIG_OF_OVERLAY=n
- Add some warnings on deprecated address handling
- Rework early_init_dt_scan() so the arch can pass in the phys
address of the DTB as __pa() is not always valid to use. This fixes
a warning for arm64 with kexec.
- Add and use some new DT graph iterators for iterating over ports
and endpoints
- Rework reserved-memory handling to be sized dynamically for fixed
regions
- Optimize of_modalias() to avoid a strlen() call
- Constify struct device_node and property pointers where ever
possible"
* tag 'devicetree-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (36 commits)
of: Allow overlay kunit tests to run CONFIG_OF_OVERLAY=n
dt-bindings: interrupt-controller: qcom,pdc: Add SAR2130P compatible
of/address: Rework bus matching to avoid warnings
of: WARN on deprecated #address-cells/#size-cells handling
of/fdt: Don't use default address cell sizes for address translation
dt-bindings: Enable dtc "interrupt_provider" warnings
of/fdt: add dt_phys arg to early_init_dt_scan and early_init_dt_verify
dt-bindings: cache: qcom,llcc: Fix X1E80100 reg entries
dt-bindings: watchdog: convert zii,rave-sp-wdt.txt to yaml format
dt-bindings: input: convert zii,rave-sp-pwrbutton.txt to yaml
media: xilinx-tpg: use new of_graph functions
fbdev: omapfb: use new of_graph functions
gpu: drm: omapdrm: use new of_graph functions
ASoC: audio-graph-card2: use new of_graph functions
ASoC: audio-graph-card: use new of_graph functions
ASoC: test-component: use new of_graph functions
of: property: use new of_graph functions
of: property: add of_graph_get_next_port_endpoint()
of: property: add of_graph_get_next_port()
of: module: remove strlen() call in of_modalias()
...
|
||
|
Kajol Jain
|
176cda0619 |
powerpc/perf: Add perf interface to expose vpa counters
To support performance measurement for KVM on PowerVM(KoP)
feature, PowerVM hypervisor has added couple of new software
counters in Virtual Process Area(VPA) of the partition.
Commit
|
||
|
Mike Rapoport (Microsoft)
|
0c3beacf68 |
asm-generic: introduce text-patching.h
Several architectures support text patching, but they name the header files that declare patching functions differently. Make all such headers consistently named text-patching.h and add an empty header in asm-generic for architectures that do not support text patching. Link: https://lkml.kernel.org/r/20241023162711.2579610-4-rppt@kernel.org Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Tested-by: kdevops <kdevops@lists.linux.dev> Cc: Andreas Larsson <andreas@gaisler.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Brian Cain <bcain@quicinc.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Guo Ren <guoren@kernel.org> Cc: Helge Deller <deller@gmx.de> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Kent Overstreet <kent.overstreet@linux.dev> Cc: Liam R. Howlett <Liam.Howlett@Oracle.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <linux@armlinux.org.uk> Cc: Song Liu <song@kernel.org> Cc: Stafford Horne <shorne@gmail.com> Cc: Steven Rostedt (Google) <rostedt@goodmis.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vineet Gupta <vgupta@kernel.org> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Thomas Weißschuh
|
6142be7ed7 |
powerpc: Split systemcfg struct definitions out from vdso
The systemcfg data has nothing to do anymore with the vdso. Split it into a dedicated header file. Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/20241010-vdso-generic-base-v1-27-b64f0842d512@linutronix.de |
||
|
Thomas Weißschuh
|
1184674d6e |
powerpc: Split systemcfg data out of vdso data page
The systemcfg data only has minimal overlap with the vdso data. Splitting the two avoids mapping the implementation-defined vdso data into /proc/ppc64/systemcfg. It is also a preparation for the standardization of vdso data storage. The only field actually used by both systemcfg and vdso is tb_ticks_per_sec and it is only changed once during time_init(). Initialize it in both structures there. Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/20241010-vdso-generic-base-v1-26-b64f0842d512@linutronix.de |