Instead of exposing the powerpc-optimized SHA-1 code via
powerpc-specific crypto_shash algorithms, instead just implement the
sha1_blocks() library function. This is much simpler, it makes the
SHA-1 library functions be powerpc-optimized, and it fixes the
longstanding issue where the powerpc-optimized SHA-1 code was disabled
by default. SHA-1 still remains available through crypto_shash, but
individual architectures no longer need to handle it.
Note: to see the diff from arch/powerpc/crypto/sha1-spe-glue.c to
lib/crypto/powerpc/sha1.h, view this commit with 'git show -M10'.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250712232329.818226-11-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Instead of providing crypto_shash algorithms for the arch-optimized
SHA-256 code, instead implement the SHA-256 library. This is much
simpler, it makes the SHA-256 library functions be arch-optimized, and
it fixes the longstanding issue where the arch-optimized SHA-256 was
disabled by default. SHA-256 still remains available through
crypto_shash, but individual architectures no longer need to handle it.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Continue disentangling the crypto library functions from the generic
crypto infrastructure by moving the powerpc ChaCha and Poly1305 library
functions into a new directory arch/powerpc/lib/crypto/ that does not
depend on CRYPTO. This mirrors the distinction between crypto/ and
lib/crypto/.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
arch/powerpc/crypto/Kconfig is sourced only when CONFIG_PPC=y, so there
is no need for the symbols defined inside it to depend on PPC.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Though the module_exit functions are now no-ops, they should still be
defined, since otherwise the modules become unremovable.
Fixes: 1f81c58279 ("crypto: arm/poly1305 - remove redundant shash algorithm")
Fixes: f4b1a73aec ("crypto: arm64/poly1305 - remove redundant shash algorithm")
Fixes: 378a337ab4 ("crypto: powerpc/poly1305 - implement library instead of shash")
Fixes: 21969da642 ("crypto: x86/poly1305 - remove redundant shash algorithm")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Though the module_exit functions are now no-ops, they should still be
defined, since otherwise the modules become unremovable.
Fixes: 08820553f3 ("crypto: arm/chacha - remove the redundant skcipher algorithms")
Fixes: 8c28abede1 ("crypto: arm64/chacha - remove the skcipher algorithms")
Fixes: f7915484c0 ("crypto: powerpc/chacha - remove the skcipher algorithms")
Fixes: ceba0eda83 ("crypto: riscv/chacha - implement library instead of skcipher")
Fixes: 632ab0978f ("crypto: x86/chacha - remove the skcipher algorithms")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Following the example of the crc32, crc32c, and chacha code, make the
crypto subsystem register both generic and architecture-optimized
poly1305 shash algorithms, both implemented on top of the appropriate
library functions. This eliminates the need for every architecture to
implement the same shash glue code.
Note that the poly1305 shash requires that the key be prepended to the
data, which differs from the library functions where the key is simply a
parameter to poly1305_init(). Previously this was handled at a fairly
low level, polluting the library code with shash-specific code.
Reorganize things so that the shash code handles this quirk itself.
Also, to register the architecture-optimized shashes only when
architecture-optimized code is actually being used, add a function
poly1305_is_arch_optimized() and make each arch implement it. Change
each architecture's Poly1305 module_init function to arch_initcall so
that the CPU feature detection is guaranteed to run before
poly1305_is_arch_optimized() gets called by crypto/poly1305.c. (In
cases where poly1305_is_arch_optimized() just returns true
unconditionally, using arch_initcall is not strictly needed, but it's
still good to be consistent across architectures.)
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently the Power10 optimized Poly1305 is only wired up to the
crypto_shash API, which makes it unavailable to users of the library
API. The crypto_shash API for Poly1305 is going to change to be
implemented on top of the library API, so the library API needs to be
supported. And of course it's needed anyway to serve the library users.
Therefore, change the Power10 optimized Poly1305 code to implement the
library API instead of the crypto_shash API.
Cc: Danny Tsen <dtsen@linux.ibm.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The powerpc aes/ghash code was relying on pagefault_disable from
being pulled in by random header files.
Fix this by explicitly including uaccess.h. Also add other missing
header files to prevent similar problems in future.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since crypto/chacha.c now registers chacha20-$(ARCH), xchacha20-$(ARCH),
and xchacha12-$(ARCH) skcipher algorithms that use the architecture's
ChaCha and HChaCha library functions, individual architectures no longer
need to do the same. Therefore, remove the redundant skcipher
algorithms and leave just the library functions.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Following the example of the crc32 and crc32c code, make the crypto
subsystem register both generic and architecture-optimized chacha20,
xchacha20, and xchacha12 skcipher algorithms, all implemented on top of
the appropriate library functions. This eliminates the need for every
architecture to implement the same skcipher glue code.
To register the architecture-optimized skciphers only when
architecture-optimized code is actually being used, add a function
chacha_is_arch_optimized() and make each arch implement it. Change each
architecture's ChaCha module_init function to arch_initcall so that the
CPU feature detection is guaranteed to run before
chacha_is_arch_optimized() gets called by crypto/chacha.c. In the case
of s390, remove the CPU feature based module autoloading, which is no
longer needed since the module just gets pulled in via function linkage.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
All implementations of chacha_init_arch() just call
chacha_init_generic(), so it is pointless. Just delete it, and replace
chacha_init() with what was previously chacha_init_generic().
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Mark the src.virt.addr field in struct skcipher_walk as a pointer
to const data. This guarantees that the user won't modify the data
which should be done through dst.virt.addr to ensure that flushing
is done when necessary.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The following build warning has been reported:
arch/powerpc/crypto/ghashp8-ppc.o: warning: objtool: .text+0x22c: unannotated intra-function call
This happens due to commit bb7f054f4d ("objtool/powerpc: Add support
for decoding all types of uncond branches")
Disassembly of arch/powerpc/crypto/ghashp8-ppc.o shows:
arch/powerpc/crypto/ghashp8-ppc.o: file format elf64-powerpcle
Disassembly of section .text:
0000000000000140 <gcm_ghash_p8>:
140: f8 ff 00 3c lis r0,-8
...
20c: 20 00 80 4e blr
210: 00 00 00 00 .long 0x0
214: 00 0c 14 00 .long 0x140c00
218: 00 00 04 00 .long 0x40000
21c: 00 00 00 00 .long 0x0
220: 47 48 41 53 rlwimi. r1,r26,9,1,3
224: 48 20 66 6f xoris r6,r27,8264
228: 72 20 50 6f xoris r16,r26,8306
22c: 77 65 72 49 bla 1726574 <gcm_ghash_p8+0x1726434> <==
...
It corresponds to the following code in ghashp8-ppc.o :
_GLOBAL(gcm_ghash_p8)
lis 0,0xfff8
...
blr
.long 0
.byte 0,12,0x14,0,0,0,4,0
.long 0
.size gcm_ghash_p8,.-gcm_ghash_p8
.byte 71,72,65,83,72,32,102,111,114,32,80,111,119,101,114,73,83,65,32,50,46,48,55,44,32,67,82,89,80,84,79,71,65,77,83,32,98,121,32,60,97,112,112,114,111,64,111,112,101,110,115,115,108,46,111,114,103,62,0
.align 2
.align 2
In fact this is raw data that is after the function end and that is
not text so shouldn't be disassembled as text. But ghashp8-ppc.S is
generated by a perl script and should have been marked as
OBJECT_FILES_NON_STANDARD.
Now that 'bla' is understood as a call instruction, that raw data
is mis-interpreted as an infra-function call.
Mark ghashp8-ppc.o as a OBJECT_FILES_NON_STANDARD to avoid this
warning.
Reported-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Closes: https://lore.kernel.org/all/8c4c3fc2-2bd7-4148-af68-2f504d6119e0@linux.ibm.com
Fixes: 109303336a ("crypto: vmx - Move to arch/powerpc/crypto")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-By: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Reviewed-by: Sathvika Vasireddy <sv@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/7aa7eb73fe6bc95ac210510e22394ca0ae227b69.1741128786.git.christophe.leroy@csgroup.eu
The ARCH_MAY_HAVE patch missed arm64, mips and s390. But it may
also lead to arch options being enabled but ineffective because
of modular/built-in conflicts.
As the primary user of all these options wireguard is selecting
the arch options anyway, make the same selections at the lib/crypto
option level and hide the arch options from the user.
Instead of selecting them centrally from lib/crypto, simply set
the default of each arch option as suggested by Eric Biggers.
Change the Crypto API generic algorithms to select the top-level
lib/crypto options instead of the generic one as otherwise there
is no way to enable the arch options (Eric Biggers). Introduce a
set of INTERNAL options to work around dependency cycles on the
CONFIG_CRYPTO symbol.
Fixes: 1047e21aec ("crypto: lib/Kconfig - Fix lib built-in failure when arch is modular")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Arnd Bergmann <arnd@kernel.org>
Closes: https://lore.kernel.org/oe-kbuild-all/202502232152.JC84YDLp-lkp@intel.com/
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The HAVE_ARCH Kconfig options in lib/crypto try to solve the
modular versus built-in problem, but it still fails when the
the LIB option (e.g., CRYPTO_LIB_CURVE25519) is selected externally.
Fix this by introducing a level of indirection with ARCH_MAY_HAVE
Kconfig options, these then go on to select the ARCH_HAVE options
if the ARCH Kconfig options matches that of the LIB option.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501230223.ikroNDr1-lkp@intel.com/
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
- Reorganize the architecture-optimized CRC32 and CRC-T10DIF code to be
directly accessible via the library API, instead of requiring the
crypto API. This is much simpler and more efficient.
- Convert some users such as ext4 to use the CRC32 library API instead
of the crypto API. More conversions like this will come later.
- Add a KUnit test that tests and benchmarks multiple CRC variants.
Remove older, less-comprehensive tests that are made redundant by
this.
- Add an entry to MAINTAINERS for the kernel's CRC library code. I'm
volunteering to maintain it. I have additional cleanups and
optimizations planned for future cycles.
These patches have been in linux-next since -rc1.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCZ418ZRQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOKyJYAP9kBlpm8W9/XY6N8SpjKaXE/vKQYHQl
Nobhak06Us8uJwEAkcUTymWP4IwQj5A9jgBAPRw53FQcNVKIc+01C7gRHw0=
=mqSH
-----END PGP SIGNATURE-----
Merge tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull CRC updates from Eric Biggers:
- Reorganize the architecture-optimized CRC32 and CRC-T10DIF code to be
directly accessible via the library API, instead of requiring the
crypto API. This is much simpler and more efficient.
- Convert some users such as ext4 to use the CRC32 library API instead
of the crypto API. More conversions like this will come later.
- Add a KUnit test that tests and benchmarks multiple CRC variants.
Remove older, less-comprehensive tests that are made redundant by
this.
- Add an entry to MAINTAINERS for the kernel's CRC library code. I'm
volunteering to maintain it. I have additional cleanups and
optimizations planned for future cycles.
* tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (31 commits)
MAINTAINERS: add entry for CRC library
powerpc/crc: delete obsolete crc-vpmsum_test.c
lib/crc32test: delete obsolete crc32test.c
lib/crc16_kunit: delete obsolete crc16_kunit.c
lib/crc_kunit.c: add KUnit test suite for CRC library functions
powerpc/crc-t10dif: expose CRC-T10DIF function through lib
arm64/crc-t10dif: expose CRC-T10DIF function through lib
arm/crc-t10dif: expose CRC-T10DIF function through lib
x86/crc-t10dif: expose CRC-T10DIF function through lib
crypto: crct10dif - expose arch-optimized lib function
lib/crc-t10dif: add support for arch overrides
lib/crc-t10dif: stop wrapping the crypto API
scsi: target: iscsi: switch to using the crc32c library
f2fs: switch to using the crc32 library
jbd2: switch to using the crc32c library
ext4: switch to using the crc32c library
lib/crc32: make crc32c() go directly to lib
bcachefs: Explicitly select CRYPTO from BCACHEFS_FS
x86/crc32: expose CRC32 functions through lib
x86/crc32: update prototype for crc32_pclmul_le_16()
...
p10_aes_gcm_crypt() is abusing the scatter_walk API to get the virtual
address for the first source scatterlist element. But this code is only
built for PPC64 which is a !HIGHMEM platform, and it can read past a
page boundary from the address returned by scatterwalk_map() which means
it already assumes the address is from the kernel's direct map. Thus,
just use sg_virt() instead to get the same result in a simpler way.
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Danny Tsen <dtsen@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N Rao <naveen@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Delete crc-vpmsum_test.c, since its functionality is now covered by the
new crc_kunit.c as well as the crypto subsystem's fuzz tests.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Vinicius Peixoto <vpeixoto@lkcamp.dev>
Link: https://lore.kernel.org/r/20241202012056.209768-12-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Move the powerpc CRC-T10DIF assembly code into the lib directory and
wire it up to the library interface. This allows it to be used without
going through the crypto API. It remains usable via the crypto API too
via the shash algorithms that use the library interface. Thus all the
arch-specific "shash" code becomes unnecessary and is removed.
Note: to see the diff from arch/powerpc/crypto/crct10dif-vpmsum_glue.c
to arch/powerpc/lib/crc-t10dif-glue.c, view this commit with
'git show -M10'.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20241202012056.209768-8-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Move the powerpc CRC32C assembly code into the lib directory and wire it
up to the library interface. This allows it to be used without going
through the crypto API. It remains usable via the crypto API too via
the shash algorithms that use the library interface. Thus all the
arch-specific "shash" code becomes unnecessary and is removed.
Note: to see the diff from arch/powerpc/crypto/crc32c-vpmsum_glue.c to
arch/powerpc/lib/crc32-glue.c, view this commit with 'git show -M10'.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20241202010844.144356-9-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
API:
- Add sig driver API.
- Remove signing/verification from akcipher API.
- Move crypto_simd_disabled_for_test to lib/crypto.
- Add WARN_ON for return values from driver that indicates memory corruption.
Algorithms:
- Provide crc32-arch and crc32c-arch through Crypto API.
- Optimise crc32c code size on x86.
- Optimise crct10dif on arm/arm64.
- Optimise p10-aes-gcm on powerpc.
- Optimise aegis128 on x86.
- Output full sample from test interface in jitter RNG.
- Retry without padata when it fails in pcrypt.
Drivers:
- Add support for Airoha EN7581 TRNG.
- Add support for STM32MP25x platforms in stm32.
- Enable iproc-r200 RNG driver on BCMBCA.
- Add Broadcom BCM74110 RNG driver.
-----BEGIN PGP SIGNATURE-----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=T8pa
-----END PGP SIGNATURE-----
Merge tag 'v6.13-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Add sig driver API
- Remove signing/verification from akcipher API
- Move crypto_simd_disabled_for_test to lib/crypto
- Add WARN_ON for return values from driver that indicates memory
corruption
Algorithms:
- Provide crc32-arch and crc32c-arch through Crypto API
- Optimise crc32c code size on x86
- Optimise crct10dif on arm/arm64
- Optimise p10-aes-gcm on powerpc
- Optimise aegis128 on x86
- Output full sample from test interface in jitter RNG
- Retry without padata when it fails in pcrypt
Drivers:
- Add support for Airoha EN7581 TRNG
- Add support for STM32MP25x platforms in stm32
- Enable iproc-r200 RNG driver on BCMBCA
- Add Broadcom BCM74110 RNG driver"
* tag 'v6.13-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (112 commits)
crypto: marvell/cesa - fix uninit value for struct mv_cesa_op_ctx
crypto: cavium - Fix an error handling path in cpt_ucode_load_fw()
crypto: aesni - Move back to module_init
crypto: lib/mpi - Export mpi_set_bit
crypto: aes-gcm-p10 - Use the correct bit to test for P10
hwrng: amd - remove reference to removed PPC_MAPLE config
crypto: arm/crct10dif - Implement plain NEON variant
crypto: arm/crct10dif - Macroify PMULL asm code
crypto: arm/crct10dif - Use existing mov_l macro instead of __adrl
crypto: arm64/crct10dif - Remove remaining 64x64 PMULL fallback code
crypto: arm64/crct10dif - Use faster 16x64 bit polynomial multiply
crypto: arm64/crct10dif - Remove obsolete chunking logic
crypto: bcm - add error check in the ahash_hmac_init function
crypto: caam - add error check to caam_rsa_set_priv_key_form
hwrng: bcm74110 - Add Broadcom BCM74110 RNG driver
dt-bindings: rng: add binding for BCM74110 RNG
padata: Clean up in padata_do_multithreaded()
crypto: inside-secure - Fix the return value of safexcel_xcbcmac_cra_init()
crypto: qat - Fix missing destroy_workqueue in adf_init_aer()
crypto: rsassa-pkcs1 - Reinstate support for legacy protocols
...
A hwcap feature bit is passed to cpu_has_feature, resulting in testing
for CPU_FTR_MMCRA instead of the 3.1 platform revision.
Fixes: c954b252de ("crypto: powerpc/p10-aes-gcm - Register modules as SIMD")
Reported-by: Nicolai Stange <nstange@suse.com>
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch is to fix an issue when simd is not usable that data mismatch
may occur. The fix is to register algs as SIMD modules so that the
algorithm is excecuted when SIMD instructions is usable. Called
gcm_update() to generate the final digest if needed.
A new module rfc4106(gcm(aes)) is also added.
Fixes: cdcecfd999 ("crypto: p10-aes-gcm - Glue code for AES/GCM stitched implementation")
Signed-off-by: Danny Tsen <dtsen@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Re-write AES/GCM assembly codes with smaller footprints and
small performance gain. Handling the partial blocks differently that
computes partial block to AES states and re-assembles to a complete
block and then computes a full-block hash.
Added gcm_update() to update the last partial block hash value and
generate the final digest.
Fixes: fd0e9b3e2e ("crypto: p10-aes-gcm - An accelerated AES/GCM stitched implementation")
Signed-off-by: Danny Tsen <dtsen@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
Data mismatch found when testing ipsec tunnel with AES/GCM crypto.
Disabling CRYPTO_AES_GCM_P10 in Kconfig for this feature.
Fixes: fd0e9b3e2e ("crypto: p10-aes-gcm - An accelerated AES/GCM stitched implementation")
Fixes: cdcecfd999 ("crypto: p10-aes-gcm - Glue code for AES/GCM stitched implementation")
Fixes: 45a4672b9a ("crypto: p10-aes-gcm - Update Kconfig and Makefile")
Signed-off-by: Danny Tsen <dtsen@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since commit 1fffe7a34c ("script: modpost: emit a warning when the
description is missing"), a module without a MODULE_DESCRIPTION() will
result in a warning with make W=1. The following warning is being
observed when building ppc64le with CRYPTO_CURVE25519_PPC64=m:
WARNING: modpost: missing MODULE_DESCRIPTION() in arch/powerpc/crypto/curve25519-ppc64le.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
API:
- Test setkey in no-SIMD context.
- Add skcipher speed test for user-specified algorithm.
Algorithms:
- Add x25519 support on ppc64le.
- Add VAES and AVX512 / AVX10 optimized AES-GCM on x86.
- Remove sm2 algorithm.
Drivers:
- Add Allwinner H616 support to sun8i-ce.
- Use DMA in stm32.
- Add Exynos850 hwrng support to exynos.
-----BEGIN PGP SIGNATURE-----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=x80X
-----END PGP SIGNATURE-----
Merge tag 'v6.11-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
"API:
- Test setkey in no-SIMD context
- Add skcipher speed test for user-specified algorithm
Algorithms:
- Add x25519 support on ppc64le
- Add VAES and AVX512 / AVX10 optimized AES-GCM on x86
- Remove sm2 algorithm
Drivers:
- Add Allwinner H616 support to sun8i-ce
- Use DMA in stm32
- Add Exynos850 hwrng support to exynos"
* tag 'v6.11-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (81 commits)
hwrng: core - remove (un)register_miscdev()
crypto: lib/mpi - delete unnecessary condition
crypto: testmgr - generate power-of-2 lengths more often
crypto: mxs-dcp - Ensure payload is zero when using key slot
hwrng: Kconfig - Do not enable by default CN10K driver
crypto: starfive - Fix nent assignment in rsa dec
crypto: starfive - Align rsa input data to 32-bit
crypto: qat - fix unintentional re-enabling of error interrupts
crypto: qat - extend scope of lock in adf_cfg_add_key_value_param()
Documentation: qat: fix auto_reset attribute details
crypto: sun8i-ce - add Allwinner H616 support
crypto: sun8i-ce - wrap accesses to descriptor address fields
dt-bindings: crypto: sun8i-ce: Add compatible for H616
hwrng: core - Fix wrong quality calculation at hw rng registration
hwrng: exynos - Enable Exynos850 support
hwrng: exynos - Add SMC based TRNG operation
hwrng: exynos - Implement bus clock control
hwrng: exynos - Use devm_clk_get_enabled() to get the clock
hwrng: exynos - Improve coding style
dt-bindings: rng: Add Exynos850 support to exynos-trng
...
Looks like drivers/crypto/vmx/.gitignore should have been merged into
arch/powerpc/crypto/.gitignore as part of commit
109303336a ("crypto: vmx - Move to arch/powerpc/crypto") so that all
generated asm files are ignored.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Fixes: 109303336a ("crypto: vmx - Move to arch/powerpc/crypto")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240603-powerpc-crypto-ignore-p8-asm-v1-1-05843fec2bb7@linux.ibm.com
Defined CRYPTO_CURVE25519_PPC64 to support X25519 for ppc64le.
Added new module curve25519-ppc64le for X25519.
Signed-off-by: Danny Tsen <dtsen@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
X25519 core functions to handle scalar multiplication for ppc64le.
Signed-off-by: Danny Tsen <dtsen@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use the perl output of x25519-ppc64.pl from CRYPTOGAMs
(see https://github.com/dot-asm/cryptogams/) and added four
supporting functions, x25519_fe51_sqr_times, x25519_fe51_frombytes,
x25519_fe51_tobytes and x25519_cswap.
Signed-off-by: Danny Tsen <dtsen@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The chacha-p10-crypto module provides optimised chacha routines for
Power10. It also selects CRYPTO_ARCH_HAVE_LIB_CHACHA which says it
provides chacha_crypt_arch() to generic code.
Notably the module needs to provide chacha_crypt_arch() regardless of
whether it is loaded on Power10 or an older CPU.
The implementation of chacha_crypt_arch() already has a fallback to
chacha_crypt_generic(), however the module as a whole fails to load on
pre-Power10, because of the use of module_cpu_feature_match().
This breaks for example loading wireguard:
jostaberry-1:~ # modprobe -v wireguard
insmod /lib/modules/6.8.0-lp155.8.g7e0e887-default/kernel/arch/powerpc/crypto/chacha-p10-crypto.ko.zst
modprobe: ERROR: could not insert 'wireguard': No such device
Fix it by removing module_cpu_feature_match(), and instead check the
CPU feature manually. If the CPU feature is not found, the module
still loads successfully, but doesn't register the Power10 specific
algorithms. That allows chacha_crypt_generic() to remain available for
use, fixing the problem.
[root@fedora ~]# modprobe -v wireguard
insmod /lib/modules/6.8.0-00001-g786a790c4d79/kernel/net/ipv4/udp_tunnel.ko
insmod /lib/modules/6.8.0-00001-g786a790c4d79/kernel/net/ipv6/ip6_udp_tunnel.ko
insmod /lib/modules/6.8.0-00001-g786a790c4d79/kernel/lib/crypto/libchacha.ko
insmod /lib/modules/6.8.0-00001-g786a790c4d79/kernel/arch/powerpc/crypto/chacha-p10-crypto.ko
insmod /lib/modules/6.8.0-00001-g786a790c4d79/kernel/lib/crypto/libchacha20poly1305.ko
insmod /lib/modules/6.8.0-00001-g786a790c4d79/kernel/drivers/net/wireguard/wireguard.ko
[ 18.910452][ T721] wireguard: allowedips self-tests: pass
[ 18.914999][ T721] wireguard: nonce counter self-tests: pass
[ 19.029066][ T721] wireguard: ratelimiter self-tests: pass
[ 19.029257][ T721] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[ 19.029361][ T721] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
Reported-by: Michal Suchánek <msuchanek@suse.de>
Closes: https://lore.kernel.org/all/20240315122005.GG20665@kitsune.suse.cz/
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240328130200.3041687-1-mpe@ellerman.id.au
Relocate all crypto files in vmx driver to arch/powerpc/crypto directory
and remove vmx directory.
drivers/crypto/vmx/aes.c rename to arch/powerpc/crypto/aes.c
drivers/crypto/vmx/aes_cbc.c rename to arch/powerpc/crypto/aes_cbc.c
drivers/crypto/vmx/aes_ctr.c rename to arch/powerpc/crypto/aes_ctr.c
drivers/crypto/vmx/aes_xts.c rename to arch/powerpc/crypto/aes_xts.c
drivers/crypto/vmx/aesp8-ppc.h rename to arch/powerpc/crypto/aesp8-ppc.h
drivers/crypto/vmx/aesp8-ppc.pl rename to arch/powerpc/crypto/aesp8-ppc.pl
drivers/crypto/vmx/ghash.c rename to arch/powerpc/crypto/ghash.c
drivers/crypto/vmx/ghashp8-ppc.pl rename to arch/powerpc/crypto/ghashp8-ppc.pl
drivers/crypto/vmx/vmx.c rename to arch/powerpc/crypto/vmx.c
deleted files:
drivers/crypto/vmx/Makefile
drivers/crypto/vmx/Kconfig
drivers/crypto/vmx/ppc-xlate.pl
This patch has been tested has passed the selftest. The patch is also tested with
CONFIG_CRYPTO_MANAGER_EXTRA_TESTS enabled.
Signed-off-by: Danny Tsen <dtsen@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The compiler doesn't know that `32` is an offset into the Hash table:
56 struct Hash_ctx {
57 u8 H[16]; /* subkey */
58 u8 Htable[256]; /* Xi, Hash table(offset 32) */
59 };
So, it legitimately complains about a potential out-of-bounds issue
if `256 bytes` are accessed in `htable` (this implies going
`32 bytes` beyond the boundaries of `Htable`):
arch/powerpc/crypto/aes-gcm-p10-glue.c: In function 'gcmp10_init':
arch/powerpc/crypto/aes-gcm-p10-glue.c:120:9: error: 'gcm_init_htable' accessing 256 bytes in a region of size 224 [-Werror=stringop-overflow=]
120 | gcm_init_htable(hash->Htable+32, hash->H);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/powerpc/crypto/aes-gcm-p10-glue.c:120:9: note: referencing argument 1 of type 'unsigned char[256]'
arch/powerpc/crypto/aes-gcm-p10-glue.c:120:9: note: referencing argument 2 of type 'unsigned char[16]'
arch/powerpc/crypto/aes-gcm-p10-glue.c:40:17: note: in a call to function 'gcm_init_htable'
40 | asmlinkage void gcm_init_htable(unsigned char htable[256], unsigned char Xi[16]);
| ^~~~~~~~~~~~~~~
Address this by avoiding specifying the size of `htable` in the function
prototype; and just for consistency, do the same for parameter `Xi`.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/linux-next/20231121131903.68a37932@canb.auug.org.au/
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
- Add HOTPLUG_SMT support (/sys/devices/system/cpu/smt) and honour the
configured SMT state when hotplugging CPUs into the system.
- Combine final TLB flush and lazy TLB mm shootdown IPIs when using the Radix
MMU to avoid a broadcast TLBIE flush on exit.
- Drop the exclusion between ptrace/perf watchpoints, and drop the now unused
associated arch hooks.
- Add support for the "nohlt" command line option to disable CPU idle.
- Add support for -fpatchable-function-entry for ftrace, with GCC >= 13.1.
- Rework memory block size determination, and support 256MB size on systems
with GPUs that have hotpluggable memory.
- Various other small features and fixes.
Thanks to: Andrew Donnellan, Aneesh Kumar K.V, Arnd Bergmann, Athira Rajeev,
Benjamin Gray, Christophe Leroy, Frederic Barrat, Gautam Menghani, Geoff Levand,
Hari Bathini, Immad Mir, Jialin Zhang, Joel Stanley, Jordan Niethe, Justin
Stitt, Kajol Jain, Kees Cook, Krzysztof Kozlowski, Laurent Dufour, Liang He,
Linus Walleij, Mahesh Salgaonkar, Masahiro Yamada, Michal Suchanek, Nageswara
R Sastry, Nathan Chancellor, Nathan Lynch, Naveen N Rao, Nicholas Piggin, Nick
Desaulniers, Omar Sandoval, Randy Dunlap, Reza Arbab, Rob Herring, Russell
Currey, Sourabh Jain, Thomas Gleixner, Trevor Woerner, Uwe Kleine-König, Vaibhav
Jain, Xiongfeng Wang, Yuan Tan, Zhang Rui, Zheng Zengkai.
-----BEGIN PGP SIGNATURE-----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=5g7K
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Add HOTPLUG_SMT support (/sys/devices/system/cpu/smt) and honour the
configured SMT state when hotplugging CPUs into the system
- Combine final TLB flush and lazy TLB mm shootdown IPIs when using the
Radix MMU to avoid a broadcast TLBIE flush on exit
- Drop the exclusion between ptrace/perf watchpoints, and drop the now
unused associated arch hooks
- Add support for the "nohlt" command line option to disable CPU idle
- Add support for -fpatchable-function-entry for ftrace, with GCC >=
13.1
- Rework memory block size determination, and support 256MB size on
systems with GPUs that have hotpluggable memory
- Various other small features and fixes
Thanks to Andrew Donnellan, Aneesh Kumar K.V, Arnd Bergmann, Athira
Rajeev, Benjamin Gray, Christophe Leroy, Frederic Barrat, Gautam
Menghani, Geoff Levand, Hari Bathini, Immad Mir, Jialin Zhang, Joel
Stanley, Jordan Niethe, Justin Stitt, Kajol Jain, Kees Cook, Krzysztof
Kozlowski, Laurent Dufour, Liang He, Linus Walleij, Mahesh Salgaonkar,
Masahiro Yamada, Michal Suchanek, Nageswara R Sastry, Nathan Chancellor,
Nathan Lynch, Naveen N Rao, Nicholas Piggin, Nick Desaulniers, Omar
Sandoval, Randy Dunlap, Reza Arbab, Rob Herring, Russell Currey, Sourabh
Jain, Thomas Gleixner, Trevor Woerner, Uwe Kleine-König, Vaibhav Jain,
Xiongfeng Wang, Yuan Tan, Zhang Rui, and Zheng Zengkai.
* tag 'powerpc-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (135 commits)
macintosh/ams: linux/platform_device.h is needed
powerpc/xmon: Reapply "Relax frame size for clang"
powerpc/mm/book3s64: Use 256M as the upper limit with coherent device memory attached
powerpc/mm/book3s64: Fix build error with SPARSEMEM disabled
powerpc/iommu: Fix notifiers being shared by PCI and VIO buses
powerpc/mpc5xxx: Add missing fwnode_handle_put()
powerpc/config: Disable SLAB_DEBUG_ON in skiroot
powerpc/pseries: Remove unused hcall tracing instruction
powerpc/pseries: Fix hcall tracepoints with JUMP_LABEL=n
powerpc: dts: add missing space before {
powerpc/eeh: Use pci_dev_id() to simplify the code
powerpc/64s: Move CPU -mtune options into Kconfig
powerpc/powermac: Fix unused function warning
powerpc/pseries: Rework lppaca_shared_proc() to avoid DEBUG_PREEMPT
powerpc: Don't include lppaca.h in paca.h
powerpc/pseries: Move hcall_vphn() prototype into vphn.h
powerpc/pseries: Move VPHN constants into vphn.h
cxl: Drop unused detach_spa()
powerpc: Drop zalloc_maybe_bootmem()
powerpc/powernv: Use struct opal_prd_msg in more places
...
Add dependency on VSX as otherwise the build will fail without
it.
Fixes: 161fca7e3e ("crypto: powerpc - Add chacha20/poly1305-p10 to Kconfig and Makefile")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202308251906.SYawej6g-lkp@intel.com/
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
API:
- Move crypto engine callback from tfm ctx into algorithm object.
- Fix atomic sleep bug in crypto_destroy_instance.
- Move lib/mpi into lib/crypto.
Algorithms:
- Add chacha20 and poly1305 implementation for powerpc p10.
Drivers:
- Add AES skcipher and aead support to starfive.
- Add Dynamic Boost Control support to ccp.
- Add support for STM32P13 platform to stm32.
-----BEGIN PGP SIGNATURE-----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=LbcA
-----END PGP SIGNATURE-----
Merge tag 'v6.6-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Move crypto engine callback from tfm ctx into algorithm object
- Fix atomic sleep bug in crypto_destroy_instance
- Move lib/mpi into lib/crypto
Algorithms:
- Add chacha20 and poly1305 implementation for powerpc p10
Drivers:
- Add AES skcipher and aead support to starfive
- Add Dynamic Boost Control support to ccp
- Add support for STM32P13 platform to stm32"
* tag 'v6.6-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (149 commits)
Revert "dt-bindings: crypto: qcom,prng: Add SM8450"
crypto: chelsio - Remove unused declarations
X.509: if signature is unsupported skip validation
crypto: qat - fix crypto capability detection for 4xxx
crypto: drivers - Explicitly include correct DT includes
crypto: engine - Remove crypto_engine_ctx
crypto: zynqmp - Use new crypto_engine_op interface
crypto: virtio - Use new crypto_engine_op interface
crypto: stm32 - Use new crypto_engine_op interface
crypto: jh7110 - Use new crypto_engine_op interface
crypto: rk3288 - Use new crypto_engine_op interface
crypto: omap - Use new crypto_engine_op interface
crypto: keembay - Use new crypto_engine_op interface
crypto: sl3516 - Use new crypto_engine_op interface
crypto: caam - Use new crypto_engine_op interface
crypto: aspeed - Remove non-standard sha512 algorithms
crypto: aspeed - Use new crypto_engine_op interface
crypto: amlogic - Use new crypto_engine_op interface
crypto: sun8i-ss - Use new crypto_engine_op interface
crypto: sun8i-ce - Use new crypto_engine_op interface
...
