Commit Graph

11 Commits

Author SHA1 Message Date
Aidan MacDonald
db30dc1a52 mips: dts: ingenic: Add TCU clock to x1000/x1830 tcu device node
This clock is a gate for the TCU hardware block on these SoCs, but
it wasn't included in the device tree since the ingenic-tcu driver
erroneously did not request it.

Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2022-06-21 17:18:39 +02:00
Linus Torvalds
54c2cc7919 USB / Thunderbolt changes for 5.19-rc1
Here is the "big" set of USB and Thunderbolt driver changes for
 5.18-rc1.  For the most part it's been a quiet development cycle for the
 USB core, but there are the usual "hot spots" of development activity.
 
 Included in here are:
 	- Thunderbolt driver updates:
 		- fixes for devices without displayport adapters
 		- lane bonding support and improvements
 		- other minor changes based on device testing
 	- dwc3 gadget driver changes.  It seems this driver will never
 	  be finished given that the IP core is showing up in zillions
 	  of new devices and each implementation decides to do something
 	  different with it...
 	- uvc gadget driver updates as more devices start to use and
 	  rely on this hardware as well
 	- usb_maxpacket() api changes to remove an unneeded and unused
 	  parameter.
 	- usb-serial driver device id updates and small cleanups
 	- typec cleanups and fixes based on device testing
 	- device tree updates for usb properties
 	- lots of other small fixes and driver updates.
 
 All of these have been in linux-next for weeks with no reported
 problems.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYpnZGw8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ymQhwCeLVANsQjBcL4ys4skl+1In17y28gAn3rEZ7rQ
 Yv4uP9zadUqg3Cx0vjgf
 =3s5s
 -----END PGP SIGNATURE-----

Merge tag 'usb-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB / Thunderbolt updates from Greg KH:
 "Here is the "big" set of USB and Thunderbolt driver changes for
  5.18-rc1. For the most part it's been a quiet development cycle for
  the USB core, but there are the usual "hot spots" of development
  activity.

  Included in here are:

   - Thunderbolt driver updates:
       - fixes for devices without displayport adapters
       - lane bonding support and improvements
       - other minor changes based on device testing

   - dwc3 gadget driver changes.

     It seems this driver will never be finished given that the IP core
     is showing up in zillions of new devices and each implementation
     decides to do something different with it...

   - uvc gadget driver updates as more devices start to use and rely on
     this hardware as well

   - usb_maxpacket() api changes to remove an unneeded and unused
     parameter.

   - usb-serial driver device id updates and small cleanups

   - typec cleanups and fixes based on device testing

   - device tree updates for usb properties

   - lots of other small fixes and driver updates.

  All of these have been in linux-next for weeks with no reported
  problems"

* tag 'usb-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (154 commits)
  USB: new quirk for Dell Gen 2 devices
  usb: dwc3: core: Add error log when core soft reset failed
  usb: dwc3: gadget: Move null pinter check to proper place
  usb: hub: Simplify error and success path in port_over_current_notify
  usb: cdns3: allocate TX FIFO size according to composite EP number
  usb: dwc3: Fix ep0 handling when getting reset while doing control transfer
  usb: Probe EHCI, OHCI controllers asynchronously
  usb: isp1760: Fix out-of-bounds array access
  xhci: Don't defer primary roothub registration if there is only one roothub
  USB: serial: option: add Quectel BG95 modem
  USB: serial: pl2303: fix type detection for odd device
  xhci: Allow host runtime PM as default for Intel Alder Lake N xHCI
  xhci: Remove quirk for over 10 year old evaluation hardware
  xhci: prevent U2 link power state if Intel tier policy prevented U1
  xhci: use generic command timer for stop endpoint commands.
  usb: host: xhci-plat: omit shared hcd if either root hub has no ports
  usb: host: xhci-plat: prepare operation w/o shared hcd
  usb: host: xhci-plat: create shared hcd after having added main hcd
  xhci: prepare for operation w/o shared hcd
  xhci: factor out parts of xhci_gen_setup()
  ...
2022-06-03 11:17:49 -07:00
周琰杰 (Zhou Yanjie)
562dc4c9c2 MIPS: Ingenic: Refresh device tree for Ingenic SoCs and boards.
1.Add SSI nodes for X1000 SoC and X1830 SoC from Ingenic.
2.Refresh SSI related nodes in CU1000-Neo and CU1830-Neo.
3.The X1830 SoC used by the CU1830-Neo and the X1000 SoC
  used by the CU1000-Neo are both single-core processors,
  therefore the "OST_CLK_PERCPU_TIMER" ABI should not be
  used in the OST nodes of the CU1830-Neo and CU1000-Neo,
  it is just a coincidence that there is no problem now.
  So replace the misused "OST_CLK_PERCPU_TIMER" ABI with
  the correct "OST_CLK_EVENT_TIMER" ABI.

Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2022-05-23 11:10:01 +02:00
周琰杰 (Zhou Yanjie)
b2a5df7134 MIPS: Ingenic: Add PWM nodes for X1830.
Add PWM node for X1830 SoC from Ingenic.

Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2022-05-23 11:09:37 +02:00
周琰杰 (Zhou Yanjie)
ab3a560ae8 MIPS: Ingenic: Refresh USB nodes to match driver changes.
Refresh USB nodes in the jz4780.dtsi, x1000.dtsi, and x1830.dtsi files.

Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Link: https://lore.kernel.org/r/1649964337-114337-4-git-send-email-zhouyanjie@wanyeetech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-21 19:22:00 +02:00
Paul Cercueil
c4a11bf423 dt-bindings: Rename Ingenic CGU headers to ingenic,*.h
Tidy up a bit the tree, by prefixing all include/dt-bindings/clock/ files
related to Ingenic SoCs with 'ingenic,'.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211016133322.40771-1-paul@crapouillou.net
2021-11-11 22:27:14 -06:00
周琰杰 (Zhou Yanjie)
ab3040e137 MIPS: Ingenic: Add MAC syscon nodes for Ingenic SoCs.
Add MAC syscon nodes for X1000 SoC and X1830 SoC from Ingenic.

Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-06-30 14:37:16 +02:00
周琰杰 (Zhou Yanjie)
579f73cf84 MIPS: X1830: Respect cell count of common properties.
If N fields of X cells should be provided, then that's what the
devicetree should represent, instead of having one single field of
(N * X) cells.

Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-06-30 14:37:16 +02:00
周琰杰 (Zhou Yanjie)
158c774d3c MIPS: Ingenic: Add missing nodes for Ingenic SoCs and boards.
1.Add OTG/OTG PHY/RNG nodes for JZ4780, CGU/OTG nodes for CI20.
2.Add OTG/OTG PHY/RNG/OST nodes for X1000, SSI/CGU/OST/OTG/SC16IS752
  nodes for CU1000-Neo.
3.Add OTG/OTG PHY/DTRNG/OST nodes for X1830, SSI/CGU/OST/OTG/SC16IS752
  nodes for CU1830-Neo.

Tested-by: 周正 (Zhou Zheng) <sernia.zhou@foxmail.com>
Tested by: H. Nikolaus Schaller <hns@goldelico.com> # CI20/jz4780
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-11-17 21:37:49 +01:00
周琰杰 (Zhou Yanjie)
c1f6b45e63 MIPS: Ingenic: Add CPU nodes for Ingenic SoCs.
Add 'cpus' node to the jz4725b.dtsi, jz4740.dtsi, jz4770.dtsi,
jz4780.dtsi, x1000.dtsi, and x1830.dtsi files.

Tested-by: H. Nikolaus Schaller <hns@goldelico.com>
Tested-by: Paul Boddie <paul@boddie.org.uk>
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-09-21 22:17:38 +02:00
周琰杰 (Zhou Yanjie)
63970c291d MIPS: Ingenic: Add Ingenic X1830 support.
Support the Ingenic X1830 SoC using the code under arch/mips/jz4740.
This is left unselectable in Kconfig until a X1830 based board is
added in a later commit.

Tested-by: 周正 (Zhou Zheng) <sernia.zhou@foxmail.com>
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-07-16 10:54:26 +02:00