mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
synced 2025-09-03 17:51:23 +00:00
loongarch-next
1350 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
9244724fbf |
A large update for SMP management:
- Parallel CPU bringup
The reason why people are interested in parallel bringup is to shorten
the (kexec) reboot time of cloud servers to reduce the downtime of the
VM tenants.
The current fully serialized bringup does the following per AP:
1) Prepare callbacks (allocate, intialize, create threads)
2) Kick the AP alive (e.g. INIT/SIPI on x86)
3) Wait for the AP to report alive state
4) Let the AP continue through the atomic bringup
5) Let the AP run the threaded bringup to full online state
There are two significant delays:
#3 The time for an AP to report alive state in start_secondary() on
x86 has been measured in the range between 350us and 3.5ms
depending on vendor and CPU type, BIOS microcode size etc.
#4 The atomic bringup does the microcode update. This has been
measured to take up to ~8ms on the primary threads depending on
the microcode patch size to apply.
On a two socket SKL server with 56 cores (112 threads) the boot CPU
spends on current mainline about 800ms busy waiting for the APs to come
up and apply microcode. That's more than 80% of the actual onlining
procedure.
This can be reduced significantly by splitting the bringup mechanism
into two parts:
1) Run the prepare callbacks and kick the AP alive for each AP which
needs to be brought up.
The APs wake up, do their firmware initialization and run the low
level kernel startup code including microcode loading in parallel
up to the first synchronization point. (#1 and #2 above)
2) Run the rest of the bringup code strictly serialized per CPU
(#3 - #5 above) as it's done today.
Parallelizing that stage of the CPU bringup might be possible in
theory, but it's questionable whether required surgery would be
justified for a pretty small gain.
If the system is large enough the first AP is already waiting at the
first synchronization point when the boot CPU finished the wake-up of
the last AP. That reduces the AP bringup time on that SKL from ~800ms
to ~80ms, i.e. by a factor ~10x.
The actual gain varies wildly depending on the system, CPU, microcode
patch size and other factors. There are some opportunities to reduce
the overhead further, but that needs some deep surgery in the x86 CPU
bringup code.
For now this is only enabled on x86, but the core functionality
obviously works for all SMP capable architectures.
- Enhancements for SMP function call tracing so it is possible to locate
the scheduling and the actual execution points. That allows to measure
IPI delivery time precisely.
-----BEGIN PGP SIGNATURE-----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=Y8if
-----END PGP SIGNATURE-----
Merge tag 'smp-core-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull SMP updates from Thomas Gleixner:
"A large update for SMP management:
- Parallel CPU bringup
The reason why people are interested in parallel bringup is to
shorten the (kexec) reboot time of cloud servers to reduce the
downtime of the VM tenants.
The current fully serialized bringup does the following per AP:
1) Prepare callbacks (allocate, intialize, create threads)
2) Kick the AP alive (e.g. INIT/SIPI on x86)
3) Wait for the AP to report alive state
4) Let the AP continue through the atomic bringup
5) Let the AP run the threaded bringup to full online state
There are two significant delays:
#3 The time for an AP to report alive state in start_secondary()
on x86 has been measured in the range between 350us and 3.5ms
depending on vendor and CPU type, BIOS microcode size etc.
#4 The atomic bringup does the microcode update. This has been
measured to take up to ~8ms on the primary threads depending
on the microcode patch size to apply.
On a two socket SKL server with 56 cores (112 threads) the boot CPU
spends on current mainline about 800ms busy waiting for the APs to
come up and apply microcode. That's more than 80% of the actual
onlining procedure.
This can be reduced significantly by splitting the bringup
mechanism into two parts:
1) Run the prepare callbacks and kick the AP alive for each AP
which needs to be brought up.
The APs wake up, do their firmware initialization and run the
low level kernel startup code including microcode loading in
parallel up to the first synchronization point. (#1 and #2
above)
2) Run the rest of the bringup code strictly serialized per CPU
(#3 - #5 above) as it's done today.
Parallelizing that stage of the CPU bringup might be possible
in theory, but it's questionable whether required surgery
would be justified for a pretty small gain.
If the system is large enough the first AP is already waiting at
the first synchronization point when the boot CPU finished the
wake-up of the last AP. That reduces the AP bringup time on that
SKL from ~800ms to ~80ms, i.e. by a factor ~10x.
The actual gain varies wildly depending on the system, CPU,
microcode patch size and other factors. There are some
opportunities to reduce the overhead further, but that needs some
deep surgery in the x86 CPU bringup code.
For now this is only enabled on x86, but the core functionality
obviously works for all SMP capable architectures.
- Enhancements for SMP function call tracing so it is possible to
locate the scheduling and the actual execution points. That allows
to measure IPI delivery time precisely"
* tag 'smp-core-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip: (45 commits)
trace,smp: Add tracepoints for scheduling remotelly called functions
trace,smp: Add tracepoints around remotelly called functions
MAINTAINERS: Add CPU HOTPLUG entry
x86/smpboot: Fix the parallel bringup decision
x86/realmode: Make stack lock work in trampoline_compat()
x86/smp: Initialize cpu_primary_thread_mask late
cpu/hotplug: Fix off by one in cpuhp_bringup_mask()
x86/apic: Fix use of X{,2}APIC_ENABLE in asm with older binutils
x86/smpboot/64: Implement arch_cpuhp_init_parallel_bringup() and enable it
x86/smpboot: Support parallel startup of secondary CPUs
x86/smpboot: Implement a bit spinlock to protect the realmode stack
x86/apic: Save the APIC virtual base address
cpu/hotplug: Allow "parallel" bringup up to CPUHP_BP_KICK_AP_STATE
x86/apic: Provide cpu_primary_thread mask
x86/smpboot: Enable split CPU startup
cpu/hotplug: Provide a split up CPUHP_BRINGUP mechanism
cpu/hotplug: Reset task stack state in _cpu_up()
cpu/hotplug: Remove unused state functions
riscv: Switch to hotplug core state synchronization
parisc: Switch to hotplug core state synchronization
...
|
||
|
Linus Torvalds
|
7cffdbe360 |
Updates for the x86 boot process:
- Initialize FPU late.
Right now FPU is initialized very early during boot. There is no real
requirement to do so. The only requirement is to have it done before
alternatives are patched.
That's done in check_bugs() which does way more than what the function
name suggests.
So first rename check_bugs() to arch_cpu_finalize_init() which makes it
clear what this is about.
Move the invocation of arch_cpu_finalize_init() earlier in
start_kernel() as it has to be done before fork_init() which needs to
know the FPU register buffer size.
With those prerequisites the FPU initialization can be moved into
arch_cpu_finalize_init(), which removes it from the early and fragile
part of the x86 bringup.
-----BEGIN PGP SIGNATURE-----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=yxMj
-----END PGP SIGNATURE-----
Merge tag 'x86-boot-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 boot updates from Thomas Gleixner:
"Initialize FPU late.
Right now FPU is initialized very early during boot. There is no real
requirement to do so. The only requirement is to have it done before
alternatives are patched.
That's done in check_bugs() which does way more than what the function
name suggests.
So first rename check_bugs() to arch_cpu_finalize_init() which makes
it clear what this is about.
Move the invocation of arch_cpu_finalize_init() earlier in
start_kernel() as it has to be done before fork_init() which needs to
know the FPU register buffer size.
With those prerequisites the FPU initialization can be moved into
arch_cpu_finalize_init(), which removes it from the early and fragile
part of the x86 bringup"
* tag 'x86-boot-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mem_encrypt: Unbreak the AMD_MEM_ENCRYPT=n build
x86/fpu: Move FPU initialization into arch_cpu_finalize_init()
x86/fpu: Mark init functions __init
x86/fpu: Remove cpuinfo argument from init functions
x86/init: Initialize signal frame size late
init, x86: Move mem_encrypt_init() into arch_cpu_finalize_init()
init: Invoke arch_cpu_finalize_init() earlier
init: Remove check_bugs() leftovers
um/cpu: Switch to arch_cpu_finalize_init()
sparc/cpu: Switch to arch_cpu_finalize_init()
sh/cpu: Switch to arch_cpu_finalize_init()
mips/cpu: Switch to arch_cpu_finalize_init()
m68k/cpu: Switch to arch_cpu_finalize_init()
loongarch/cpu: Switch to arch_cpu_finalize_init()
ia64/cpu: Switch to arch_cpu_finalize_init()
ARM: cpu: Switch to arch_cpu_finalize_init()
x86/cpu: Switch to arch_cpu_finalize_init()
init: Provide arch_cpu_finalize_init()
|
||
|
Ben Hutchings
|
4bce37a68f |
mips/mm: Convert to using lock_mm_and_find_vma()
Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Thomas Gleixner
|
7f066a22fe |
mips/cpu: Switch to arch_cpu_finalize_init()
check_bugs() is about to be phased out. Switch over to the new arch_cpu_finalize_init() implementation. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20230613224545.312438573@linutronix.de |
||
|
Jiaxun Yang
|
975fd3c26f |
MIPS: Select CONFIG_GENERIC_IDLE_POLL_SETUP
hlt,nohlt paramaters are useful when debugging cpuidle related issues. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> |
||
|
Maciej W. Rozycki
|
1e13da548f |
Revert "MIPS: unhide PATA_PLATFORM"
Revert commit
|
||
|
Thomas Bogendoerfer
|
e71dc5bf5e |
- fixes to get alchemy platform back in shape
- fix for initrd detection -----BEGIN PGP SIGNATURE----- iQJOBAABCAA4FiEEbt46xwy6kEcDOXoUeZbBVTGwZHAFAmRzEeEaHHRzYm9nZW5k QGFscGhhLmZyYW5rZW4uZGUACgkQeZbBVTGwZHC2Ng//VlCCXU2pWG/bEMFsZlXo TdsrDhpoLHcJoXvl5/CLIWqDc2j4zCD13PbIJovYK3+7dPLMuPdTsljOKD9Yjg7P UrjzbM2k5Kb47EXq8kp7TWxP2+MiN87B7EAHbsFdbW8Alu6bgmVcyV5fAxo7ddxi b28qijQA9sOW6gZSl4lQ8oMvRsGTRPaDyO43xj+K03ONHKQFJN7i7e/H8/9wXNSs YWhA38HRvIDUFwHm5PeRTuxKApYP+FNH97pHPDDeZBO9135ISqTn2TkpubsRCz4D 3eRT+vqzBsYAaL3Qz1cdtXdjo873vTrJPbu/md0rJE9kwDNEtEpoWiYVknDmNWiv WA747I/euH5VD0Mir855LJ2rLZOytxGSGU8cMcJoQd0qg+t40GY4DH+3mJHxXi3l ruj2eOQ8KnSQfHWI3ugv8s+kOPWQBo3vhIIBAlxOeVrhGvKsnIwd/t7ZDHxtsjSi V1zdR17XjWPlmS6mCSAqDI5JjidWL0LakyoYGOkaSpzohSoL4TUxpUHfOl6uL/cQ nju2OEM8f7G1FCQR1AdFikdSC29B3WxyuhoqE4DOorQy9POMDSYMUIpIOw5jIIDK 8Tt3HuepRd37b/JngyFrXBYggJRzB6Zzmrr07lVpb7dmSPK9PRTFACw1Xlkw7NNj 5G0xJ0QrDFIvGEEFdX1lBnQ= =HNFm -----END PGP SIGNATURE----- Merge tag 'mips-fixes_6.4_1' into mips-next - fixes to get alchemy platform back in shape - fix for initrd detection |
||
|
Jiaxun Yang
|
fb6700c598 |
MIPS: generic: Allow R5 CPUs to be selected
Since we do have P5600 bitfile for boston board, we should allow generic kernel to be compiled for R5 CPUs. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> |
||
|
Manuel Lauss
|
75b18aac6f |
MIPS: unhide PATA_PLATFORM
Alchemy DB1200/DB1300 boards can use the pata_platform driver. Unhide the config entry in all of MIPS. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> |
||
|
Thomas Gleixner
|
c8d2bcc467 |
MIPS: SMP_CPS: Switch to hotplug core state synchronization
Switch to the CPU hotplug core state tracking and synchronization mechanim. This unfortunately requires to add dead reporting to the non CPS platforms as CPS is the only user, but it allows an overall consolidation of this functionality. No functional change intended. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Michael Kelley <mikelley@microsoft.com> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Tested-by: Helge Deller <deller@gmx.de> # parisc Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com> # Steam Deck Link: https://lore.kernel.org/r/20230512205256.803238859@linutronix.de |
||
|
Linus Torvalds
|
7fa8a8ee94 |
- Nick Piggin's "shoot lazy tlbs" series, to improve the peformance of
switching from a user process to a kernel thread.
- More folio conversions from Kefeng Wang, Zhang Peng and Pankaj Raghav.
- zsmalloc performance improvements from Sergey Senozhatsky.
- Yue Zhao has found and fixed some data race issues around the
alteration of memcg userspace tunables.
- VFS rationalizations from Christoph Hellwig:
- removal of most of the callers of write_one_page().
- make __filemap_get_folio()'s return value more useful
- Luis Chamberlain has changed tmpfs so it no longer requires swap
backing. Use `mount -o noswap'.
- Qi Zheng has made the slab shrinkers operate locklessly, providing
some scalability benefits.
- Keith Busch has improved dmapool's performance, making part of its
operations O(1) rather than O(n).
- Peter Xu adds the UFFD_FEATURE_WP_UNPOPULATED feature to userfaultd,
permitting userspace to wr-protect anon memory unpopulated ptes.
- Kirill Shutemov has changed MAX_ORDER's meaning to be inclusive rather
than exclusive, and has fixed a bunch of errors which were caused by its
unintuitive meaning.
- Axel Rasmussen give userfaultfd the UFFDIO_CONTINUE_MODE_WP feature,
which causes minor faults to install a write-protected pte.
- Vlastimil Babka has done some maintenance work on vma_merge():
cleanups to the kernel code and improvements to our userspace test
harness.
- Cleanups to do_fault_around() by Lorenzo Stoakes.
- Mike Rapoport has moved a lot of initialization code out of various
mm/ files and into mm/mm_init.c.
- Lorenzo Stoakes removd vmf_insert_mixed_prot(), which was added for
DRM, but DRM doesn't use it any more.
- Lorenzo has also coverted read_kcore() and vread() to use iterators
and has thereby removed the use of bounce buffers in some cases.
- Lorenzo has also contributed further cleanups of vma_merge().
- Chaitanya Prakash provides some fixes to the mmap selftesting code.
- Matthew Wilcox changes xfs and afs so they no longer take sleeping
locks in ->map_page(), a step towards RCUification of pagefaults.
- Suren Baghdasaryan has improved mmap_lock scalability by switching to
per-VMA locking.
- Frederic Weisbecker has reworked the percpu cache draining so that it
no longer causes latency glitches on cpu isolated workloads.
- Mike Rapoport cleans up and corrects the ARCH_FORCE_MAX_ORDER Kconfig
logic.
- Liu Shixin has changed zswap's initialization so we no longer waste a
chunk of memory if zswap is not being used.
- Yosry Ahmed has improved the performance of memcg statistics flushing.
- David Stevens has fixed several issues involving khugepaged,
userfaultfd and shmem.
- Christoph Hellwig has provided some cleanup work to zram's IO-related
code paths.
- David Hildenbrand has fixed up some issues in the selftest code's
testing of our pte state changing.
- Pankaj Raghav has made page_endio() unneeded and has removed it.
- Peter Xu contributed some rationalizations of the userfaultfd
selftests.
- Yosry Ahmed has fixed an issue around memcg's page recalim accounting.
- Chaitanya Prakash has fixed some arm-related issues in the
selftests/mm code.
- Longlong Xia has improved the way in which KSM handles hwpoisoned
pages.
- Peter Xu fixes a few issues with uffd-wp at fork() time.
- Stefan Roesch has changed KSM so that it may now be used on a
per-process and per-cgroup basis.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZEr3zQAKCRDdBJ7gKXxA
jlLoAP0fpQBipwFxED0Us4SKQfupV6z4caXNJGPeay7Aj11/kQD/aMRC2uPfgr96
eMG3kwn2pqkB9ST2QpkaRbxA//eMbQY=
=J+Dj
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-04-27-15-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Nick Piggin's "shoot lazy tlbs" series, to improve the peformance of
switching from a user process to a kernel thread.
- More folio conversions from Kefeng Wang, Zhang Peng and Pankaj
Raghav.
- zsmalloc performance improvements from Sergey Senozhatsky.
- Yue Zhao has found and fixed some data race issues around the
alteration of memcg userspace tunables.
- VFS rationalizations from Christoph Hellwig:
- removal of most of the callers of write_one_page()
- make __filemap_get_folio()'s return value more useful
- Luis Chamberlain has changed tmpfs so it no longer requires swap
backing. Use `mount -o noswap'.
- Qi Zheng has made the slab shrinkers operate locklessly, providing
some scalability benefits.
- Keith Busch has improved dmapool's performance, making part of its
operations O(1) rather than O(n).
- Peter Xu adds the UFFD_FEATURE_WP_UNPOPULATED feature to userfaultd,
permitting userspace to wr-protect anon memory unpopulated ptes.
- Kirill Shutemov has changed MAX_ORDER's meaning to be inclusive
rather than exclusive, and has fixed a bunch of errors which were
caused by its unintuitive meaning.
- Axel Rasmussen give userfaultfd the UFFDIO_CONTINUE_MODE_WP feature,
which causes minor faults to install a write-protected pte.
- Vlastimil Babka has done some maintenance work on vma_merge():
cleanups to the kernel code and improvements to our userspace test
harness.
- Cleanups to do_fault_around() by Lorenzo Stoakes.
- Mike Rapoport has moved a lot of initialization code out of various
mm/ files and into mm/mm_init.c.
- Lorenzo Stoakes removd vmf_insert_mixed_prot(), which was added for
DRM, but DRM doesn't use it any more.
- Lorenzo has also coverted read_kcore() and vread() to use iterators
and has thereby removed the use of bounce buffers in some cases.
- Lorenzo has also contributed further cleanups of vma_merge().
- Chaitanya Prakash provides some fixes to the mmap selftesting code.
- Matthew Wilcox changes xfs and afs so they no longer take sleeping
locks in ->map_page(), a step towards RCUification of pagefaults.
- Suren Baghdasaryan has improved mmap_lock scalability by switching to
per-VMA locking.
- Frederic Weisbecker has reworked the percpu cache draining so that it
no longer causes latency glitches on cpu isolated workloads.
- Mike Rapoport cleans up and corrects the ARCH_FORCE_MAX_ORDER Kconfig
logic.
- Liu Shixin has changed zswap's initialization so we no longer waste a
chunk of memory if zswap is not being used.
- Yosry Ahmed has improved the performance of memcg statistics
flushing.
- David Stevens has fixed several issues involving khugepaged,
userfaultfd and shmem.
- Christoph Hellwig has provided some cleanup work to zram's IO-related
code paths.
- David Hildenbrand has fixed up some issues in the selftest code's
testing of our pte state changing.
- Pankaj Raghav has made page_endio() unneeded and has removed it.
- Peter Xu contributed some rationalizations of the userfaultfd
selftests.
- Yosry Ahmed has fixed an issue around memcg's page recalim
accounting.
- Chaitanya Prakash has fixed some arm-related issues in the
selftests/mm code.
- Longlong Xia has improved the way in which KSM handles hwpoisoned
pages.
- Peter Xu fixes a few issues with uffd-wp at fork() time.
- Stefan Roesch has changed KSM so that it may now be used on a
per-process and per-cgroup basis.
* tag 'mm-stable-2023-04-27-15-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (369 commits)
mm,unmap: avoid flushing TLB in batch if PTE is inaccessible
shmem: restrict noswap option to initial user namespace
mm/khugepaged: fix conflicting mods to collapse_file()
sparse: remove unnecessary 0 values from rc
mm: move 'mmap_min_addr' logic from callers into vm_unmapped_area()
hugetlb: pte_alloc_huge() to replace huge pte_alloc_map()
maple_tree: fix allocation in mas_sparse_area()
mm: do not increment pgfault stats when page fault handler retries
zsmalloc: allow only one active pool compaction context
selftests/mm: add new selftests for KSM
mm: add new KSM process and sysfs knobs
mm: add new api to enable ksm per process
mm: shrinkers: fix debugfs file permissions
mm: don't check VMA write permissions if the PTE/PMD indicates write permissions
migrate_pages_batch: fix statistics for longterm pin retry
userfaultfd: use helper function range_in_vma()
lib/show_mem.c: use for_each_populated_zone() simplify code
mm: correct arg in reclaim_pages()/reclaim_clean_pages_from_list()
fs/buffer: convert create_page_buffers to folio_create_buffers
fs/buffer: add folio_create_empty_buffers helper
...
|
||
|
Linus Torvalds
|
91ec4b0d11 |
- added support for Huawei B593u-12
- added support for virt board aligned to QEMU MIPS virt board
- added support for doing DMA coherence on a per device base
- reworked handling of RALINK SoCs
- cleanup for Loongon64 barriers
- removed deprecated support for MIPS_CMP SMP handling method
- removed support Sibyte CARMEL and CHRINE boards
- cleanups and fixes
-----BEGIN PGP SIGNATURE-----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=eo9R
-----END PGP SIGNATURE-----
Merge tag 'mips_6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer:
- added support for Huawei B593u-12
- added support for virt board aligned to QEMU MIPS virt board
- added support for doing DMA coherence on a per device base
- reworked handling of RALINK SoCs
- cleanup for Loongon64 barriers
- removed deprecated support for MIPS_CMP SMP handling method
- removed support Sibyte CARMEL and CHRINE boards
- cleanups and fixes
* tag 'mips_6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (59 commits)
MIPS: uprobes: Restore thread.trap_nr
MIPS: Don't clear _PAGE_SPECIAL in _PAGE_CHG_MASK
MIPS: Sink body of check_bugs_early() into its only call site
MIPS: Mark check_bugs() as __init
Revert "MIPS: generic: Enable all CPUs supported by virt board in Kconfig"
MIPS: octeon_switch: Remove duplicated labels
MIPS: loongson2ef: Add missing break in cs5536_isa
MIPS: Remove set_swbp() in uprobes.c
MIPS: Use def_bool y for ARCH_SUPPORTS_UPROBES
MIPS: fw: Allow firmware to pass a empty env
MIPS: Remove deprecated CONFIG_MIPS_CMP
MIPS: lantiq: remove unused function declaration
MIPS: Drop unused positional parameter in local_irq_{dis,en}able
MIPS: mm: Remove local_cache_flush_page
MIPS: Remove no longer used ide.h
MIPS: mm: Remove unused *cache_page_indexed flush functions
MIPS: generic: Enable all CPUs supported by virt board in Kconfig
MIPS: Add board config for virt board
MIPS: Octeon: Disable CVMSEG by default on other platforms
MIPS: Loongson: Don't select platform features with CPU
...
|
||
|
Linus Torvalds
|
6e98b09da9 |
Networking changes for 6.4.
Core
----
- Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the
default value allows for better BIG TCP performances.
- Reduce compound page head access for zero-copy data transfers.
- RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when possible.
- Threaded NAPI improvements, adding defer skb free support and unneeded
softirq avoidance.
- Address dst_entry reference count scalability issues, via false
sharing avoidance and optimize refcount tracking.
- Add lockless accesses annotation to sk_err[_soft].
- Optimize again the skb struct layout.
- Extends the skb drop reasons to make it usable by multiple
subsystems.
- Better const qualifier awareness for socket casts.
BPF
---
- Add skb and XDP typed dynptrs which allow BPF programs for more
ergonomic and less brittle iteration through data and variable-sized
accesses.
- Add a new BPF netfilter program type and minimal support to hook
BPF programs to netfilter hooks such as prerouting or forward.
- Add more precise memory usage reporting for all BPF map types.
- Adds support for using {FOU,GUE} encap with an ipip device operating
in collect_md mode and add a set of BPF kfuncs for controlling encap
params.
- Allow BPF programs to detect at load time whether a particular kfunc
exists or not, and also add support for this in light skeleton.
- Bigger batch of BPF verifier improvements to prepare for upcoming BPF
open-coded iterators allowing for less restrictive looping capabilities.
- Rework RCU enforcement in the verifier, add kptr_rcu and enforce BPF
programs to NULL-check before passing such pointers into kfunc.
- Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and in
local storage maps.
- Enable RCU semantics for task BPF kptrs and allow referenced kptr
tasks to be stored in BPF maps.
- Add support for refcounted local kptrs to the verifier for allowing
shared ownership, useful for adding a node to both the BPF list and
rbtree.
- Add BPF verifier support for ST instructions in convert_ctx_access()
which will help new -mcpu=v4 clang flag to start emitting them.
- Add ARM32 USDT support to libbpf.
- Improve bpftool's visual program dump which produces the control
flow graph in a DOT format by adding C source inline annotations.
Protocols
---------
- IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value
indicates the provenance of the IP address.
- IPv6: optimize route lookup, dropping unneeded R/W lock acquisition.
- Add the handshake upcall mechanism, allowing the user-space
to implement generic TLS handshake on kernel's behalf.
- Bridge: support per-{Port, VLAN} neighbor suppression, increasing
resilience to nodes failures.
- SCTP: add support for Fair Capacity and Weighted Fair Queueing
schedulers.
- MPTCP: delay first subflow allocation up to its first usage. This
will allow for later better LSM interaction.
- xfrm: Remove inner/outer modes from input/output path. These are
not needed anymore.
- WiFi:
- reduced neighbor report (RNR) handling for AP mode
- HW timestamping support
- support for randomized auth/deauth TA for PASN privacy
- per-link debugfs for multi-link
- TC offload support for mac80211 drivers
- mac80211 mesh fast-xmit and fast-rx support
- enable Wi-Fi 7 (EHT) mesh support
Netfilter
---------
- Add nf_tables 'brouting' support, to force a packet to be routed
instead of being bridged.
- Update bridge netfilter and ovs conntrack helpers to handle
IPv6 Jumbo packets properly, i.e. fetch the packet length
from hop-by-hop extension header. This is needed for BIT TCP
support.
- The iptables 32bit compat interface isn't compiled in by default
anymore.
- Move ip(6)tables builtin icmp matches to the udptcp one.
This has the advantage that icmp/icmpv6 match doesn't load the
iptables/ip6tables modules anymore when iptables-nft is used.
- Extended netlink error report for netdevice in flowtables and
netdev/chains. Allow for incrementally add/delete devices to netdev
basechain. Allow to create netdev chain without device.
Driver API
----------
- Remove redundant Device Control Error Reporting Enable, as PCI core
has already error reporting enabled at enumeration time.
- Move Multicast DB netlink handlers to core, allowing devices other
then bridge to use them.
- Allow the page_pool to directly recycle the pages from safely
localized NAPI.
- Implement lockless TX queue stop/wake combo macros, allowing for
further code de-duplication and sanitization.
- Add YNL support for user headers and struct attrs.
- Add partial YNL specification for devlink.
- Add partial YNL specification for ethtool.
- Add tc-mqprio and tc-taprio support for preemptible traffic classes.
- Add tx push buf len param to ethtool, specifies the maximum number
of bytes of a transmitted packet a driver can push directly to the
underlying device.
- Add basic LED support for switch/phy.
- Add NAPI documentation, stop relaying on external links.
- Convert dsa_master_ioctl() to netdev notifier. This is a preparatory
work to make the hardware timestamping layer selectable by user
space.
- Add transceiver support and improve the error messages for CAN-FD
controllers.
New hardware / drivers
----------------------
- Ethernet:
- AMD/Pensando core device support
- MediaTek MT7981 SoC
- MediaTek MT7988 SoC
- Broadcom BCM53134 embedded switch
- Texas Instruments CPSW9G ethernet switch
- Qualcomm EMAC3 DWMAC ethernet
- StarFive JH7110 SoC
- NXP CBTX ethernet PHY
- WiFi:
- Apple M1 Pro/Max devices
- RealTek rtl8710bu/rtl8188gu
- RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset
- Bluetooth:
- Realtek RTL8821CS, RTL8851B, RTL8852BS
- Mediatek MT7663, MT7922
- NXP w8997
- Actions Semi ATS2851
- QTI WCN6855
- Marvell 88W8997
- Can:
- STMicroelectronics bxcan stm32f429
Drivers
-------
- Ethernet NICs:
- Intel (1G, icg):
- add tracking and reporting of QBV config errors.
- add support for configuring max SDU for each Tx queue.
- Intel (100G, ice):
- refactor mailbox overflow detection to support Scalable IOV
- GNSS interface optimization
- Intel (i40e):
- support XDP multi-buffer
- nVidia/Mellanox:
- add the support for linux bridge multicast offload
- enable TC offload for egress and engress MACVLAN over bond
- add support for VxLAN GBP encap/decap flows offload
- extend packet offload to fully support libreswan
- support tunnel mode in mlx5 IPsec packet offload
- extend XDP multi-buffer support
- support MACsec VLAN offload
- add support for dynamic msix vectors allocation
- drop RX page_cache and fully use page_pool
- implement thermal zone to report NIC temperature
- Netronome/Corigine:
- add support for multi-zone conntrack offload
- Solarflare/Xilinx:
- support offloading TC VLAN push/pop actions to the MAE
- support TC decap rules
- support unicast PTP
- Other NICs:
- Broadcom (bnxt): enforce software based freq adjustments only
on shared PHC NIC
- RealTek (r8169): refactor to addess ASPM issues during NAPI poll.
- Micrel (lan8841): add support for PTP_PF_PEROUT
- Cadence (macb): enable PTP unicast
- Engleder (tsnep): add XDP socket zero-copy support
- virtio-net: implement exact header length guest feature
- veth: add page_pool support for page recycling
- vxlan: add MDB data path support
- gve: add XDP support for GQI-QPL format
- geneve: accept every ethertype
- macvlan: allow some packets to bypass broadcast queue
- mana: add support for jumbo frame
- Ethernet high-speed switches:
- Microchip (sparx5): Add support for TC flower templates.
- Ethernet embedded switches:
- Broadcom (b54):
- configure 6318 and 63268 RGMII ports
- Marvell (mv88e6xxx):
- faster C45 bus scan
- Microchip:
- lan966x:
- add support for IS1 VCAP
- better TX/RX from/to CPU performances
- ksz9477: add ETS Qdisc support
- ksz8: enhance static MAC table operations and error handling
- sama7g5: add PTP capability
- NXP (ocelot):
- add support for external ports
- add support for preemptible traffic classes
- Texas Instruments:
- add CPSWxG SGMII support for J7200 and J721E
- Intel WiFi (iwlwifi):
- preparation for Wi-Fi 7 EHT and multi-link support
- EHT (Wi-Fi 7) sniffer support
- hardware timestamping support for some devices/firwmares
- TX beacon protection on newer hardware
- Qualcomm 802.11ax WiFi (ath11k):
- MU-MIMO parameters support
- ack signal support for management packets
- RealTek WiFi (rtw88):
- SDIO bus support
- better support for some SDIO devices
(e.g. MAC address from efuse)
- RealTek WiFi (rtw89):
- HW scan support for 8852b
- better support for 6 GHz scanning
- support for various newer firmware APIs
- framework firmware backwards compatibility
- MediaTek WiFi (mt76):
- P2P support
- mesh A-MSDU support
- EHT (Wi-Fi 7) support
- coredump support
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=ITVa
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the
default value allows for better BIG TCP performances
- Reduce compound page head access for zero-copy data transfers
- RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when
possible
- Threaded NAPI improvements, adding defer skb free support and
unneeded softirq avoidance
- Address dst_entry reference count scalability issues, via false
sharing avoidance and optimize refcount tracking
- Add lockless accesses annotation to sk_err[_soft]
- Optimize again the skb struct layout
- Extends the skb drop reasons to make it usable by multiple
subsystems
- Better const qualifier awareness for socket casts
BPF:
- Add skb and XDP typed dynptrs which allow BPF programs for more
ergonomic and less brittle iteration through data and
variable-sized accesses
- Add a new BPF netfilter program type and minimal support to hook
BPF programs to netfilter hooks such as prerouting or forward
- Add more precise memory usage reporting for all BPF map types
- Adds support for using {FOU,GUE} encap with an ipip device
operating in collect_md mode and add a set of BPF kfuncs for
controlling encap params
- Allow BPF programs to detect at load time whether a particular
kfunc exists or not, and also add support for this in light
skeleton
- Bigger batch of BPF verifier improvements to prepare for upcoming
BPF open-coded iterators allowing for less restrictive looping
capabilities
- Rework RCU enforcement in the verifier, add kptr_rcu and enforce
BPF programs to NULL-check before passing such pointers into kfunc
- Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and
in local storage maps
- Enable RCU semantics for task BPF kptrs and allow referenced kptr
tasks to be stored in BPF maps
- Add support for refcounted local kptrs to the verifier for allowing
shared ownership, useful for adding a node to both the BPF list and
rbtree
- Add BPF verifier support for ST instructions in
convert_ctx_access() which will help new -mcpu=v4 clang flag to
start emitting them
- Add ARM32 USDT support to libbpf
- Improve bpftool's visual program dump which produces the control
flow graph in a DOT format by adding C source inline annotations
Protocols:
- IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value
indicates the provenance of the IP address
- IPv6: optimize route lookup, dropping unneeded R/W lock acquisition
- Add the handshake upcall mechanism, allowing the user-space to
implement generic TLS handshake on kernel's behalf
- Bridge: support per-{Port, VLAN} neighbor suppression, increasing
resilience to nodes failures
- SCTP: add support for Fair Capacity and Weighted Fair Queueing
schedulers
- MPTCP: delay first subflow allocation up to its first usage. This
will allow for later better LSM interaction
- xfrm: Remove inner/outer modes from input/output path. These are
not needed anymore
- WiFi:
- reduced neighbor report (RNR) handling for AP mode
- HW timestamping support
- support for randomized auth/deauth TA for PASN privacy
- per-link debugfs for multi-link
- TC offload support for mac80211 drivers
- mac80211 mesh fast-xmit and fast-rx support
- enable Wi-Fi 7 (EHT) mesh support
Netfilter:
- Add nf_tables 'brouting' support, to force a packet to be routed
instead of being bridged
- Update bridge netfilter and ovs conntrack helpers to handle IPv6
Jumbo packets properly, i.e. fetch the packet length from
hop-by-hop extension header. This is needed for BIT TCP support
- The iptables 32bit compat interface isn't compiled in by default
anymore
- Move ip(6)tables builtin icmp matches to the udptcp one. This has
the advantage that icmp/icmpv6 match doesn't load the
iptables/ip6tables modules anymore when iptables-nft is used
- Extended netlink error report for netdevice in flowtables and
netdev/chains. Allow for incrementally add/delete devices to netdev
basechain. Allow to create netdev chain without device
Driver API:
- Remove redundant Device Control Error Reporting Enable, as PCI core
has already error reporting enabled at enumeration time
- Move Multicast DB netlink handlers to core, allowing devices other
then bridge to use them
- Allow the page_pool to directly recycle the pages from safely
localized NAPI
- Implement lockless TX queue stop/wake combo macros, allowing for
further code de-duplication and sanitization
- Add YNL support for user headers and struct attrs
- Add partial YNL specification for devlink
- Add partial YNL specification for ethtool
- Add tc-mqprio and tc-taprio support for preemptible traffic classes
- Add tx push buf len param to ethtool, specifies the maximum number
of bytes of a transmitted packet a driver can push directly to the
underlying device
- Add basic LED support for switch/phy
- Add NAPI documentation, stop relaying on external links
- Convert dsa_master_ioctl() to netdev notifier. This is a
preparatory work to make the hardware timestamping layer selectable
by user space
- Add transceiver support and improve the error messages for CAN-FD
controllers
New hardware / drivers:
- Ethernet:
- AMD/Pensando core device support
- MediaTek MT7981 SoC
- MediaTek MT7988 SoC
- Broadcom BCM53134 embedded switch
- Texas Instruments CPSW9G ethernet switch
- Qualcomm EMAC3 DWMAC ethernet
- StarFive JH7110 SoC
- NXP CBTX ethernet PHY
- WiFi:
- Apple M1 Pro/Max devices
- RealTek rtl8710bu/rtl8188gu
- RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset
- Bluetooth:
- Realtek RTL8821CS, RTL8851B, RTL8852BS
- Mediatek MT7663, MT7922
- NXP w8997
- Actions Semi ATS2851
- QTI WCN6855
- Marvell 88W8997
- Can:
- STMicroelectronics bxcan stm32f429
Drivers:
- Ethernet NICs:
- Intel (1G, icg):
- add tracking and reporting of QBV config errors
- add support for configuring max SDU for each Tx queue
- Intel (100G, ice):
- refactor mailbox overflow detection to support Scalable IOV
- GNSS interface optimization
- Intel (i40e):
- support XDP multi-buffer
- nVidia/Mellanox:
- add the support for linux bridge multicast offload
- enable TC offload for egress and engress MACVLAN over bond
- add support for VxLAN GBP encap/decap flows offload
- extend packet offload to fully support libreswan
- support tunnel mode in mlx5 IPsec packet offload
- extend XDP multi-buffer support
- support MACsec VLAN offload
- add support for dynamic msix vectors allocation
- drop RX page_cache and fully use page_pool
- implement thermal zone to report NIC temperature
- Netronome/Corigine:
- add support for multi-zone conntrack offload
- Solarflare/Xilinx:
- support offloading TC VLAN push/pop actions to the MAE
- support TC decap rules
- support unicast PTP
- Other NICs:
- Broadcom (bnxt): enforce software based freq adjustments only on
shared PHC NIC
- RealTek (r8169): refactor to addess ASPM issues during NAPI poll
- Micrel (lan8841): add support for PTP_PF_PEROUT
- Cadence (macb): enable PTP unicast
- Engleder (tsnep): add XDP socket zero-copy support
- virtio-net: implement exact header length guest feature
- veth: add page_pool support for page recycling
- vxlan: add MDB data path support
- gve: add XDP support for GQI-QPL format
- geneve: accept every ethertype
- macvlan: allow some packets to bypass broadcast queue
- mana: add support for jumbo frame
- Ethernet high-speed switches:
- Microchip (sparx5): Add support for TC flower templates
- Ethernet embedded switches:
- Broadcom (b54):
- configure 6318 and 63268 RGMII ports
- Marvell (mv88e6xxx):
- faster C45 bus scan
- Microchip:
- lan966x:
- add support for IS1 VCAP
- better TX/RX from/to CPU performances
- ksz9477: add ETS Qdisc support
- ksz8: enhance static MAC table operations and error handling
- sama7g5: add PTP capability
- NXP (ocelot):
- add support for external ports
- add support for preemptible traffic classes
- Texas Instruments:
- add CPSWxG SGMII support for J7200 and J721E
- Intel WiFi (iwlwifi):
- preparation for Wi-Fi 7 EHT and multi-link support
- EHT (Wi-Fi 7) sniffer support
- hardware timestamping support for some devices/firwmares
- TX beacon protection on newer hardware
- Qualcomm 802.11ax WiFi (ath11k):
- MU-MIMO parameters support
- ack signal support for management packets
- RealTek WiFi (rtw88):
- SDIO bus support
- better support for some SDIO devices (e.g. MAC address from
efuse)
- RealTek WiFi (rtw89):
- HW scan support for 8852b
- better support for 6 GHz scanning
- support for various newer firmware APIs
- framework firmware backwards compatibility
- MediaTek WiFi (mt76):
- P2P support
- mesh A-MSDU support
- EHT (Wi-Fi 7) support
- coredump support"
* tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2078 commits)
net: phy: hide the PHYLIB_LEDS knob
net: phy: marvell-88x2222: remove unnecessary (void*) conversions
tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp.
net: amd: Fix link leak when verifying config failed
net: phy: marvell: Fix inconsistent indenting in led_blink_set
lan966x: Don't use xdp_frame when action is XDP_TX
tsnep: Add XDP socket zero-copy TX support
tsnep: Add XDP socket zero-copy RX support
tsnep: Move skb receive action to separate function
tsnep: Add functions for queue enable/disable
tsnep: Rework TX/RX queue initialization
tsnep: Replace modulo operation with mask
net: phy: dp83867: Add led_brightness_set support
net: phy: Fix reading LED reg property
drivers: nfc: nfcsim: remove return value check of `dev_dir`
net: phy: dp83867: Remove unnecessary (void*) conversions
net: ethtool: coalesce: try to make user settings stick twice
net: mana: Check if netdev/napi_alloc_frag returns single page
net: mana: Rename mana_refill_rxoob and remove some empty lines
net: veth: add page_pool stats
...
|
||
|
Thomas Bogendoerfer
|
20470a68a0 |
Revert "MIPS: generic: Enable all CPUs supported by virt board in Kconfig"
This reverts commit
|
||
|
Tiezhu Yang
|
f5748b8c79 |
MIPS: Use def_bool y for ARCH_SUPPORTS_UPROBES
Like all the other archs, use def_bool y for ARCH_SUPPORTS_UPROBES, then no need to select ARCH_SUPPORTS_UPROBES. Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> |
||
|
Thomas Bogendoerfer
|
7fb6f7b0af |
MIPS: Remove deprecated CONFIG_MIPS_CMP
Commit
|
||
|
Mike Rapoport (IBM)
|
60bcbe70bf |
mips: drop ranges for definition of ARCH_FORCE_MAX_ORDER
MIPS defines insane ranges for ARCH_FORCE_MAX_ORDER allowing MAX_ORDER up to 63, which implies maximal contiguous allocation size of 2^63 pages. Drop bogus definitions of ranges for ARCH_FORCE_MAX_ORDER and leave it a simple integer with sensible defaults. Users that *really* need to change the value of ARCH_FORCE_MAX_ORDER will be able to do so but they won't be mislead by the bogus ranges. Link: https://lkml.kernel.org/r/20230322081520.2516226-1-rppt@kernel.org Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: WANG Xuerui <kernel@xen0n.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Kirill A. Shutemov
|
23baf831a3 |
mm, treewide: redefine MAX_ORDER sanely
MAX_ORDER currently defined as number of orders page allocator supports: user can ask buddy allocator for page order between 0 and MAX_ORDER-1. This definition is counter-intuitive and lead to number of bugs all over the kernel. Change the definition of MAX_ORDER to be inclusive: the range of orders user can ask from buddy allocator is 0..MAX_ORDER now. [kirill@shutemov.name: fix min() warning] Link: https://lkml.kernel.org/r/20230315153800.32wib3n5rickolvh@box [akpm@linux-foundation.org: fix another min_t warning] [kirill@shutemov.name: fixups per Zi Yan] Link: https://lkml.kernel.org/r/20230316232144.b7ic4cif4kjiabws@box.shutemov.name [akpm@linux-foundation.org: fix underlining in docs] Link: https://lore.kernel.org/oe-kbuild-all/202303191025.VRCTk6mP-lkp@intel.com/ Link: https://lkml.kernel.org/r/20230315113133.11326-11-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Niklas Schnelle
|
fcbfe8121a
|
Kconfig: introduce HAS_IOPORT option and select it as necessary
We introduce a new HAS_IOPORT Kconfig option to indicate support for I/O Port access. In a future patch HAS_IOPORT=n will disable compilation of the I/O accessor functions inb()/outb() and friends on architectures which can not meaningfully support legacy I/O spaces such as s390. The following architectures do not select HAS_IOPORT: * ARC * C-SKY * Hexagon * Nios II * OpenRISC * s390 * User-Mode Linux * Xtensa All other architectures select HAS_IOPORT at least conditionally. The "depends on" relations on HAS_IOPORT in drivers as well as ifdefs for HAS_IOPORT specific sections will be added in subsequent patches on a per subsystem basis. Co-developed-by: Arnd Bergmann <arnd@kernel.org> Signed-off-by: Arnd Bergmann <arnd@kernel.org> Acked-by: Johannes Berg <johannes@sipsolutions.net> # for ARCH=um Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Jiaxun Yang
|
de34007751 |
MIPS: generic: Enable all CPUs supported by virt board in Kconfig
Enable extra CPUs that may be supported by virt board, including R4x00 (R4000 in QEMU), Cavium Octeon (Octeon68XX in QEMU), loongson2e, loongson2f. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> |
||
|
Jiaxun Yang
|
0c6ff92773 |
MIPS: Loongson: Don't select platform features with CPU
ARCH_HAS_PHYS_TO_DMA and GPIOLIB are all platform level features they shouldn't be selected with CPU. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> |
||
|
Jiaxun Yang
|
e0b7fd1207 |
MIPS: Always select ARCH_HAS_SYNC_DMA_FOR_CPU for noncoherent platforms
As now we are telling the necessity of post DMA flush per CPU type, there is no need to select ARCH_HAS_SYNC_DMA_FOR_CPU on per platform bias, just select it unconditionally and we can sort it at runtime. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> |
||
|
Jiaxun Yang
|
6be87d61c4 |
MIPS: Always select ARCH_HAS_SETUP_DMA_OPS
arch_setup_dma_ops on MIPS sets coherency information in struct device. It's essential for per-device coherency to work. Select it for all non-coherent platforms. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> |
||
|
Lukas Bulwahn
|
d703e5a6ff |
mips: Remove obsolete configs IRQ_MSP_CIC and IRQ_MSP_SLP
Commit
|
||
|
Thomas Bogendoerfer
|
0345234720 |
MIPS: sibyte: Replace BCM1125H with SB1250 option
SIBYTE_BCM1125H is identical to SIBYTE_SB1250, so remove one of them. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> |
||
|
Thomas Bogendoerfer
|
a0136c28a2 |
MIPS: sibyte: Remove Sibyte CARMEL and CRHINE board support
Looks like these boards were nether in active use, so let's remove them. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> |
||
|
Jiaxun Yang
|
162e134aed |
MIPS: Loongson64: Remove CPU_HAS_WB
Q: Do we have really have write buffer A: Yes, on newer Loongson processors there is a "store fill buffer" that will collect *cached* writes, on all Loongson processors AXI crossbar will buffer all writes. Q: Then why do we want to remove CPU_HAS_WB? A: Because CPU_HAS_WB introduces wbflush, which intends to flush all write reuqests to mmio device. We won't be affected by store fill buffer because it won't buffer uncached writes. And a regular memory barrier is sufficient to flush crossbar write buffer. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> |
||
|
Jakub Kicinski
|
d0ddf5065f |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Documentation/bpf/bpf_devel_QA.rst |
||
|
Jakub Kicinski
|
36e5e391a2 |
bpf-next-for-netdev
-----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZAZsBwAKCRDbK58LschI g3W1AQCQnO6pqqX5Q2aYDAZPlZRtV2TRLjuqrQE0dHW/XLAbBgD/bgsAmiKhPSCG 2mTt6izpTQVlZB0e8KcDIvbYd9CE3Qc= =EjJQ -----END PGP SIGNATURE----- Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Daniel Borkmann says: ==================== pull-request: bpf-next 2023-03-06 We've added 85 non-merge commits during the last 13 day(s) which contain a total of 131 files changed, 7102 insertions(+), 1792 deletions(-). The main changes are: 1) Add skb and XDP typed dynptrs which allow BPF programs for more ergonomic and less brittle iteration through data and variable-sized accesses, from Joanne Koong. 2) Bigger batch of BPF verifier improvements to prepare for upcoming BPF open-coded iterators allowing for less restrictive looping capabilities, from Andrii Nakryiko. 3) Rework RCU enforcement in the verifier, add kptr_rcu and enforce BPF programs to NULL-check before passing such pointers into kfunc, from Alexei Starovoitov. 4) Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and in local storage maps, from Kumar Kartikeya Dwivedi. 5) Add BPF verifier support for ST instructions in convert_ctx_access() which will help new -mcpu=v4 clang flag to start emitting them, from Eduard Zingerman. 6) Make uprobe attachment Android APK aware by supporting attachment to functions inside ELF objects contained in APKs via function names, from Daniel Müller. 7) Add a new flag BPF_F_TIMER_ABS flag for bpf_timer_start() helper to start the timer with absolute expiration value instead of relative one, from Tero Kristo. 8) Add a new kfunc bpf_cgroup_from_id() to look up cgroups via id, from Tejun Heo. 9) Extend libbpf to support users manually attaching kprobes/uprobes in the legacy/perf/link mode, from Menglong Dong. 10) Implement workarounds in the mips BPF JIT for DADDI/R4000, from Jiaxun Yang. 11) Enable mixing bpf2bpf and tailcalls for the loongarch BPF JIT, from Hengqi Chen. 12) Extend BPF instruction set doc with describing the encoding of BPF instructions in terms of how bytes are stored under big/little endian, from Jose E. Marchesi. 13) Follow-up to enable kfunc support for riscv BPF JIT, from Pu Lehui. 14) Fix bpf_xdp_query() backwards compatibility on old kernels, from Yonghong Song. 15) Fix BPF selftest cross compilation with CLANG_CROSS_FLAGS, from Florent Revest. 16) Improve bpf_cpumask_ma to only allocate one bpf_mem_cache, from Hou Tao. 17) Fix BPF verifier's check_subprogs to not unnecessarily mark a subprogram with has_tail_call, from Ilya Leoshkevich. 18) Fix arm syscall regs spec in libbpf's bpf_tracing.h, from Puranjay Mohan. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (85 commits) selftests/bpf: Add test for legacy/perf kprobe/uprobe attach mode selftests/bpf: Split test_attach_probe into multi subtests libbpf: Add support to set kprobe/uprobe attach mode tools/resolve_btfids: Add /libsubcmd to .gitignore bpf: add support for fixed-size memory pointer returns for kfuncs bpf: generalize dynptr_get_spi to be usable for iters bpf: mark PTR_TO_MEM as non-null register type bpf: move kfunc_call_arg_meta higher in the file bpf: ensure that r0 is marked scratched after any function call bpf: fix visit_insn()'s detection of BPF_FUNC_timer_set_callback helper bpf: clean up visit_insn()'s instruction processing selftests/bpf: adjust log_fixup's buffer size for proper truncation bpf: honor env->test_state_freq flag in is_state_visited() selftests/bpf: enhance align selftest's expected log matching bpf: improve regsafe() checks for PTR_TO_{MEM,BUF,TP_BUFFER} bpf: improve stack slot state printing selftests/bpf: Disassembler tests for verifier.c:convert_ctx_access() selftests/bpf: test if pointer type is tracked for BPF_ST_MEM bpf: allow ctx writes using BPF_ST_MEM instruction bpf: Use separate RCU callbacks for freeing selem ... ==================== Link: https://lore.kernel.org/r/20230307004346.27578-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Jiaxun Yang
|
1a2c73f483 |
MIPS: Workaround clang inline compat branch issue
Clang is unable to handle the situation that a chunk of inline assembly ends with a compat branch instruction and then compiler generates another control transfer instruction immediately after this compat branch. The later instruction will end up in forbidden slot and cause exception. Workaround by add a option to control the use of compact branch. Currently it's selected by CC_IS_CLANG and hopefully we can change it to a version check in future if clang manages to fix it. Fix boot on boston board. Link: https://github.com/llvm/llvm-project/issues/61045 Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Acked-by: Nathan Chancellor <nathan@kernel.org> Acked-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> |
||
|
Jiaxun Yang
|
7364d60c26 |
bpf, mips: Implement R4000 workarounds for JIT
For R4000 erratas around multiplication and division instructions, as our use of those instructions are always followed by mflo/mfhi instructions, the only issue we need care is "MIPS R4000PC/SC Errata, Processor Revision 2.2 and 3.0" Errata 28: "A double-word or a variable shift may give an incorrect result if executed while an integer multiplication is in progress." We just emit a mfhi $0 to ensure the operation is completed after every multiplication instruction according to workaround suggestion in the document. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Acked-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Link: https://lore.kernel.org/bpf/20230228113305.83751-3-jiaxun.yang@flygoat.com |
||
|
Jiaxun Yang
|
bbefef2f07 |
bpf, mips: Implement DADDI workarounds for JIT
For DADDI errata we just workaround by disable immediate operation for BPF_ADD / BPF_SUB to avoid generation of DADDIU. All other use cases in JIT won't cause overflow thus they are all safe. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Acked-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Link: https://lore.kernel.org/bpf/20230228113305.83751-2-jiaxun.yang@flygoat.com |
||
|
Arınç ÜNAL
|
f2b95d7a9f |
mips: remove SYS_HAS_CPU_MIPS32_R1 from RALINK
All MIPS processors on the Ralink SoCs implement the MIPS32 Release 2 Architecture. Remove SYS_HAS_CPU_MIPS32_R1. Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> |
||
|
Jiaxun Yang
|
dd8314739a |
MIPS: Remove DMA_PERDEV_COHERENT
As now we are always managing DMA coherence on per dev bias, there is no need to have such option. And it's not selected by any platform. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> |
||
|
Sander Vanheule
|
b74cc639f7 |
mips: Realtek RTL: select NO_EXCEPT_FILL
The CPUs in these SoCs support MIPS32 R2, and allow ebase relocation. Even if the default exception base of 0x80000000 is used, the MIPS_GENERIC load address of 0x80100000 leaves sufficient space to not need an extra 0x400 bytes of padding. Suggested-by: Olliver Schinagl <oliver@schinagl.nl> Signed-off-by: Sander Vanheule <sander@svanheule.net> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> |
||
|
Peter Zijlstra
|
6ca297d478 |
mm: Rename GUP_GET_PTE_LOW_HIGH
Since it no longer applies to only PTEs, rename it to PXX. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20221022114424.776404066%40infradead.org |
||
|
Linus Torvalds
|
27bc50fc90 |
- Yu Zhao's Multi-Gen LRU patches are here. They've been under test in
linux-next for a couple of months without, to my knowledge, any negative reports (or any positive ones, come to that). - Also the Maple Tree from Liam R. Howlett. An overlapping range-based tree for vmas. It it apparently slight more efficient in its own right, but is mainly targeted at enabling work to reduce mmap_lock contention. Liam has identified a number of other tree users in the kernel which could be beneficially onverted to mapletrees. Yu Zhao has identified a hard-to-hit but "easy to fix" lockdep splat (https://lkml.kernel.org/r/CAOUHufZabH85CeUN-MEMgL8gJGzJEWUrkiM58JkTbBhh-jew0Q@mail.gmail.com). This has yet to be addressed due to Liam's unfortunately timed vacation. He is now back and we'll get this fixed up. - Dmitry Vyukov introduces KMSAN: the Kernel Memory Sanitizer. It uses clang-generated instrumentation to detect used-unintialized bugs down to the single bit level. KMSAN keeps finding bugs. New ones, as well as the legacy ones. - Yang Shi adds a userspace mechanism (madvise) to induce a collapse of memory into THPs. - Zach O'Keefe has expanded Yang Shi's madvise(MADV_COLLAPSE) to support file/shmem-backed pages. - userfaultfd updates from Axel Rasmussen - zsmalloc cleanups from Alexey Romanov - cleanups from Miaohe Lin: vmscan, hugetlb_cgroup, hugetlb and memory-failure - Huang Ying adds enhancements to NUMA balancing memory tiering mode's page promotion, with a new way of detecting hot pages. - memcg updates from Shakeel Butt: charging optimizations and reduced memory consumption. - memcg cleanups from Kairui Song. - memcg fixes and cleanups from Johannes Weiner. - Vishal Moola provides more folio conversions - Zhang Yi removed ll_rw_block() :( - migration enhancements from Peter Xu - migration error-path bugfixes from Huang Ying - Aneesh Kumar added ability for a device driver to alter the memory tiering promotion paths. For optimizations by PMEM drivers, DRM drivers, etc. - vma merging improvements from Jakub Matěn. - NUMA hinting cleanups from David Hildenbrand. - xu xin added aditional userspace visibility into KSM merging activity. - THP & KSM code consolidation from Qi Zheng. - more folio work from Matthew Wilcox. - KASAN updates from Andrey Konovalov. - DAMON cleanups from Kaixu Xia. - DAMON work from SeongJae Park: fixes, cleanups. - hugetlb sysfs cleanups from Muchun Song. - Mike Kravetz fixes locking issues in hugetlbfs and in hugetlb core. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY0HaPgAKCRDdBJ7gKXxA joPjAQDZ5LlRCMWZ1oxLP2NOTp6nm63q9PWcGnmY50FjD/dNlwEAnx7OejCLWGWf bbTuk6U2+TKgJa4X7+pbbejeoqnt5QU= =xfWx -----END PGP SIGNATURE----- Merge tag 'mm-stable-2022-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - Yu Zhao's Multi-Gen LRU patches are here. They've been under test in linux-next for a couple of months without, to my knowledge, any negative reports (or any positive ones, come to that). - Also the Maple Tree from Liam Howlett. An overlapping range-based tree for vmas. It it apparently slightly more efficient in its own right, but is mainly targeted at enabling work to reduce mmap_lock contention. Liam has identified a number of other tree users in the kernel which could be beneficially onverted to mapletrees. Yu Zhao has identified a hard-to-hit but "easy to fix" lockdep splat at [1]. This has yet to be addressed due to Liam's unfortunately timed vacation. He is now back and we'll get this fixed up. - Dmitry Vyukov introduces KMSAN: the Kernel Memory Sanitizer. It uses clang-generated instrumentation to detect used-unintialized bugs down to the single bit level. KMSAN keeps finding bugs. New ones, as well as the legacy ones. - Yang Shi adds a userspace mechanism (madvise) to induce a collapse of memory into THPs. - Zach O'Keefe has expanded Yang Shi's madvise(MADV_COLLAPSE) to support file/shmem-backed pages. - userfaultfd updates from Axel Rasmussen - zsmalloc cleanups from Alexey Romanov - cleanups from Miaohe Lin: vmscan, hugetlb_cgroup, hugetlb and memory-failure - Huang Ying adds enhancements to NUMA balancing memory tiering mode's page promotion, with a new way of detecting hot pages. - memcg updates from Shakeel Butt: charging optimizations and reduced memory consumption. - memcg cleanups from Kairui Song. - memcg fixes and cleanups from Johannes Weiner. - Vishal Moola provides more folio conversions - Zhang Yi removed ll_rw_block() :( - migration enhancements from Peter Xu - migration error-path bugfixes from Huang Ying - Aneesh Kumar added ability for a device driver to alter the memory tiering promotion paths. For optimizations by PMEM drivers, DRM drivers, etc. - vma merging improvements from Jakub Matěn. - NUMA hinting cleanups from David Hildenbrand. - xu xin added aditional userspace visibility into KSM merging activity. - THP & KSM code consolidation from Qi Zheng. - more folio work from Matthew Wilcox. - KASAN updates from Andrey Konovalov. - DAMON cleanups from Kaixu Xia. - DAMON work from SeongJae Park: fixes, cleanups. - hugetlb sysfs cleanups from Muchun Song. - Mike Kravetz fixes locking issues in hugetlbfs and in hugetlb core. Link: https://lkml.kernel.org/r/CAOUHufZabH85CeUN-MEMgL8gJGzJEWUrkiM58JkTbBhh-jew0Q@mail.gmail.com [1] * tag 'mm-stable-2022-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (555 commits) hugetlb: allocate vma lock for all sharable vmas hugetlb: take hugetlb vma_lock when clearing vma_lock->vma pointer hugetlb: fix vma lock handling during split vma and range unmapping mglru: mm/vmscan.c: fix imprecise comments mm/mglru: don't sync disk for each aging cycle mm: memcontrol: drop dead CONFIG_MEMCG_SWAP config symbol mm: memcontrol: use do_memsw_account() in a few more places mm: memcontrol: deprecate swapaccounting=0 mode mm: memcontrol: don't allocate cgroup swap arrays when memcg is disabled mm/secretmem: remove reduntant return value mm/hugetlb: add available_huge_pages() func mm: remove unused inline functions from include/linux/mm_inline.h selftests/vm: add selftest for MADV_COLLAPSE of uffd-minor memory selftests/vm: add file/shmem MADV_COLLAPSE selftest for cleared pmd selftests/vm: add thp collapse shmem testing selftests/vm: add thp collapse file and tmpfs testing selftests/vm: modularize thp collapse memory operations selftests/vm: dedup THP helpers mm/khugepaged: add tracepoint to hpage_collapse_scan_file() mm/madvise: add file and shmem support to MADV_COLLAPSE ... |
||
|
Zi Yan
|
0192445cb2 |
arch: mm: rename FORCE_MAX_ZONEORDER to ARCH_FORCE_MAX_ORDER
This Kconfig option is used by individual arch to set its desired MAX_ORDER. Rename it to reflect its actual use. Link: https://lkml.kernel.org/r/20220815143959.1511278-1-zi.yan@sent.com Acked-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Zi Yan <ziy@nvidia.com> Acked-by: Guo Ren <guoren@kernel.org> [csky] Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64] Acked-by: Huacai Chen <chenhuacai@kernel.org> [LoongArch] Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Taichi Sugaya <sugaya.taichi@socionext.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Qin Jian <qinjian@cqplus1.com> Cc: Guo Ren <guoren@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Zankel <chris@zankel.net> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Alexander Sverdlin
|
727488e305 |
mips: Select SPARSEMEM_EXTREME
Commit
|
||
|
Linus Torvalds
|
d77771c926 |
added support for Netgear WNR3500L v2
removed support for VR41xx SoC and platforms based on it cleanups and fixes -----BEGIN PGP SIGNATURE----- iQJOBAABCAA4FiEEbt46xwy6kEcDOXoUeZbBVTGwZHAFAmLuJnIaHHRzYm9nZW5k QGFscGhhLmZyYW5rZW4uZGUACgkQeZbBVTGwZHD8gw//THeurhC3lURZfqPP1tMn 0ZLXpyfWP+xjH8iY4nrvSj3ZG5Ng7OBSP2fafB9TSwYnPKJm/d7AzgiofT0/R8ke IlH0CAlOxkl+rI43BICTN+4W7qAGMR5gf62lKG4CBMt/heV/NwiZzAQAVQNDYbWU 1C3fgjQKiH24aTbWR5wWPrOvr1lMR3T7tWEEucjO3uViJo4UkAcD4Q96u6INdDM9 bmkLy03djaG3JMdUn+TTuwqF4KBZVA0ktvjWzdxy9jhE9K/5sf51yizbILt+aXW9 +LGTysLIqYEtb2syU0ms/YhJKhKTF58Fueo/JeandqFzBBdtQL9ZazaleIGbrOR8 3VbdBulNMyudda3ulWMFnbd8NRW0tIQJ7AbJKprFKPb1VOr3fF1/tFEVbHG5N056 rc+H6SnbzfTJj2Om81vqhrNj7Og2qdj+w1GgOvM/a0Qwo+PgHGo7PWo4Qkekp0ql ZPETk4HThNylfEdqlmf4UxOx+m+aHFxUTyY9RbPsXW3tdZwQByLIiAREyx54AfF6 oWPpXY6V9GXlYB4HNKn3Ag+D0rYijyyiM+n8nCdy0J9OJJGCv9MqYxc5jozk+nbS VA1tzpONZoSB3/7Bhu4rATN/8aWJ/TxCgFwEoDpSKKybFgJFeet9xWlc1DPjfe87 7imBii1yVkI2FGNWzuiR5eE= =TuYr -----END PGP SIGNATURE----- Merge tag 'mips_6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS updates from Thomas Bogendoerfer: - added support for Netgear WNR3500L v2 - removed support for VR41xx SoC and platforms based on it - cleanups and fixes * tag 'mips_6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (25 commits) MIPS: tlbex: Explicitly compare _PAGE_NO_EXEC against 0 Revert "MIPS: octeon: Remove vestiges of CONFIG_CAVIUM_RESERVE32" MIPS: Introduce CAVIUM_RESERVE32 Kconfig option MIPS: msi-octeon: eliminate kernel-doc warnings MIPS: Fix comment typo MIPS: BMIPS: Utilize cfe_die() for invalid DTB MIPS: CFE: Add cfe_die() MIPS: Fixed __debug_virt_addr_valid() MIPS: BCM47XX: Add support for Netgear WNR3500L v2 MIPS: Remove VR41xx support MIPS: dts: align gpio-key node names with dtschema MIPS: dts: correct gpio-keys names and properties MIPS: cpuinfo: Fix a warning for CONFIG_CPUMASK_OFFSTACK MIPS: Make phys_to_virt utilize __va() MIPS: vdso: Utilize __pa() for gic_pfn MIPS: mm: Use the bitmap API to allocate bitmaps MIPS: math-emu: Use the bitmap API to allocate bitmaps MIPS: Loongson64: Fix section mismatch warning mips: cavium-octeon: Fix missing of_node_put() in octeon2_usb_clocks_start MIPS: mscc: ocelot: enable FDMA usage ... |
||
|
Linus Torvalds
|
3bd6e5854b |
asm-generic: updates for 6.0
There are three independent sets of changes:
- Sai Prakash Ranjan adds tracing support to the asm-generic
version of the MMIO accessors, which is intended to help
understand problems with device drivers and has been part
of Qualcomm's vendor kernels for many years.
- A patch from Sebastian Siewior to rework the handling of
IRQ stacks in softirqs across architectures, which is
needed for enabling PREEMPT_RT.
- The last patch to remove the CONFIG_VIRT_TO_BUS option and
some of the code behind that, after the last users of this
old interface made it in through the netdev, scsi, media and
staging trees.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmLqPPEACgkQmmx57+YA
GNlUbQ/+NpIsiA0JUrCGtySt8KrLHdA2dH9lJOR5/iuxfphscPFfWtpcPvcXQWmt
a8u7wyI8SHW1ku4U0Y5sO0dBSldDnoIqJ5t4X5d7YNU9yVtEtucqQhZf+GkrPlVD
1HkRu05B7y0k2BMn7BLhSvkpafs3f1lNGXjs8oFBdOF1/zwp/GjcrfCK7KFzqjwU
dYrX0SOFlKFd4BZC75VfK+XcKg4LtwIOmJraRRl7alz2Q5Oop2hgjgZxXDPf//vn
SPOhXJN/97i1FUpY2TkfHVH1NxbPfjCV4pUnjmLG0Y4NSy9UQ/ZcXHcywIdeuhfa
0LySOIsAqBeccpYYYdg2ubiMDZOXkBfANu/sB9o/EhoHfB4svrbPRDhBIQZMFXJr
MJYu+IYce2rvydA/nydo4q++pxR8v1ES1ZIo8bDux+q1CI/zbpQV+f98kPVRA0M7
ajc+5GTIqNIsvHzzadq7eYxcj5Bi8Li2JA9sVkAQ+6iq1TVyeYayMc9eYwONlmqw
MD+PFYc651pKtXZCfkLXPIKSwS0uPqBndAibuVhpZ0hxWaCBBdKvY9mrWcPxt0kA
tMR8lrosbbrV2K48BFdWTOHvCs2FhHQxPGVPZ/iWuxTA0hHZ9tUlaEkSX+VM57IU
KCYQLdWzT8J9vrgqSbgYKlb6pSPz6FIjTfut6NZMmshIbavHV/Q=
=aTR0
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"There are three independent sets of changes:
- Sai Prakash Ranjan adds tracing support to the asm-generic version
of the MMIO accessors, which is intended to help understand
problems with device drivers and has been part of Qualcomm's vendor
kernels for many years
- A patch from Sebastian Siewior to rework the handling of IRQ stacks
in softirqs across architectures, which is needed for enabling
PREEMPT_RT
- The last patch to remove the CONFIG_VIRT_TO_BUS option and some of
the code behind that, after the last users of this old interface
made it in through the netdev, scsi, media and staging trees"
* tag 'asm-generic-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
uapi: asm-generic: fcntl: Fix typo 'the the' in comment
arch/*/: remove CONFIG_VIRT_TO_BUS
soc: qcom: geni: Disable MMIO tracing for GENI SE
serial: qcom_geni_serial: Disable MMIO tracing for geni serial
asm-generic/io: Add logging support for MMIO accessors
KVM: arm64: Add a flag to disable MMIO trace for nVHE KVM
lib: Add register read/write tracing support
drm/meson: Fix overflow implicit truncation warnings
irqchip/tegra: Fix overflow implicit truncation warnings
coresight: etm4x: Use asm-generic IO memory barriers
arm64: io: Use asm-generic high level MMIO accessors
arch/*: Disable softirq stacks on PREEMPT_RT.
|
||
|
Florian Fainelli
|
466ab2ea23 |
MIPS: BMIPS: Utilize cfe_die() for invalid DTB
If we were not specified a correct DTB, we will not be able to print anything useful with panic() which requires a working console of some sort. Utilize cfe_die() to callback into the CFE default UART and print some useful diagnostics. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> |
||
|
Thomas Bogendoerfer
|
d3164e2f3b |
MIPS: Remove VR41xx support
No (active) developer owns this hardware, so let's remove Linux support. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> |
||
|
Frederic Weisbecker
|
24a9c54182 |
context_tracking: Split user tracking Kconfig
Context tracking is going to be used not only to track user transitions but also idle/IRQs/NMIs. The user tracking part will then become a separate feature. Prepare Kconfig for that. [ frederic: Apply Max Filippov feedback. ] Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com> Cc: Uladzislau Rezki <uladzislau.rezki@sony.com> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Nicolas Saenz Julienne <nsaenz@kernel.org> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Xiongfeng Wang <wangxiongfeng2@huawei.com> Cc: Yu Liao <liaoyu15@huawei.com> Cc: Phil Auld <pauld@redhat.com> Cc: Paul Gortmaker<paul.gortmaker@windriver.com> Cc: Alex Belits <abelits@marvell.com> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Reviewed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com> Tested-by: Nicolas Saenz Julienne <nsaenzju@redhat.com> |
||
|
Arnd Bergmann
|
4313a24985 |
arch/*/: remove CONFIG_VIRT_TO_BUS
All architecture-independent users of virt_to_bus() and bus_to_virt() have been fixed to use the dma mapping interfaces or have been removed now. This means the definitions on most architectures, and the CONFIG_VIRT_TO_BUS symbol are now obsolete and can be removed. The only exceptions to this are a few network and scsi drivers for m68k Amiga and VME machines and ppc32 Macintosh. These drivers work correctly with the old interfaces and are probably not worth changing. On alpha and parisc, virt_to_bus() were still used in asm/floppy.h. alpha can use isa_virt_to_bus() like x86 does, and parisc can just open-code the virt_to_phys() here, as this is architecture specific code. I tried updating the bus-virt-phys-mapping.rst documentation, which started as an email from Linus to explain some details of the Linux-2.0 driver interfaces. The bits about virt_to_bus() were declared obsolete backin 2000, and the rest is not all that relevant any more, so in the end I just decided to remove the file completely. Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Acked-by: Helge Deller <deller@gmx.de> # parisc Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Linus Torvalds
|
35b51afd23 |
RISC-V Patches for the 5.19 Merge Window, Part 1
* Support for the Svpbmt extension, which allows memory attributes to be encoded in pages. * Support for the Allwinner D1's implementation of page-based memory attributes. * Support for running rv32 binaries on rv64 systems, via the compat subsystem. * Support for kexec_file(). * Support for the new generic ticket-based spinlocks, which allows us to also move to qrwlock. These should have already gone in through the asm-geneic tree as well. * A handful of cleanups and fixes, include some larger ones around atomics and XIP. -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAmKWOx8THHBhbG1lckBk YWJiZWx0LmNvbQAKCRAuExnzX7sYieAiEADAUdP7ctoaSQwk5skd/fdA3b4KJuKn 1Zjl+Br32WP0DlbirYBYWRUQZnCCsvABbTiwSJMcG7NBpU5pyQ5XDtB3OA5kJswO Fdp8Nd53//+GK1M5zdEM9OdgvT9fbfTZ3qTu8bKsROOQhGwnYL+Csc9KjFRqEmzN oQii0jlb3n5PM4FL3GsbV4uMn9zzkP9mnVAPQktcock2EKFEK/Fy3uNYMQiO2KPi n8O6bIDaeRdQ6SurzWOuOkt0cro0tEF85ilzT04mynQsOU0el5oGqCxnOhNH3VWg ndqPT6Yafw12hZOtbKJeP+nF8IIR6aJLP3jOtRwEVgcfbXYAw4QwbAV8kQZISefN ipn8JGY7GX9Y9TYU692OUGkcmAb3/dxb6c0WihBdvJ0M6YyLD5X+YKHNuG2onLgK ss43C5Mxsu629rsjdu/PV91B1+pve3rG9siVmF+g4eo0x9rjMq6/JB0Kal/8SLI1 Je5T55d5ujV1a2XxhZLQOSD5owrK7J1M9owb0bloTnr9nVwFTWDrfEQEU82o3kP+ Xm+FfXktnz9ai55NjkMbbEur5D++dKJhBavwCTnBcTrJmMtEH0R45GTK9ZehP+WC rNVrRXjIsS18wsTfJxnkZeFQA38as6VBKTzvwHvOgzTrrZU1/xk3lpkouYtAO6BG gKacHshVilmUuA== =Loi6 -----END PGP SIGNATURE----- Merge tag 'riscv-for-linus-5.19-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V updates from Palmer Dabbelt: - Support for the Svpbmt extension, which allows memory attributes to be encoded in pages - Support for the Allwinner D1's implementation of page-based memory attributes - Support for running rv32 binaries on rv64 systems, via the compat subsystem - Support for kexec_file() - Support for the new generic ticket-based spinlocks, which allows us to also move to qrwlock. These should have already gone in through the asm-geneic tree as well - A handful of cleanups and fixes, include some larger ones around atomics and XIP * tag 'riscv-for-linus-5.19-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (51 commits) RISC-V: Prepare dropping week attribute from arch_kexec_apply_relocations[_add] riscv: compat: Using seperated vdso_maps for compat_vdso_info RISC-V: Fix the XIP build RISC-V: Split out the XIP fixups into their own file RISC-V: ignore xipImage RISC-V: Avoid empty create_*_mapping definitions riscv: Don't output a bogus mmu-type on a no MMU kernel riscv: atomic: Add custom conditional atomic operation implementation riscv: atomic: Optimize dec_if_positive functions riscv: atomic: Cleanup unnecessary definition RISC-V: Load purgatory in kexec_file RISC-V: Add purgatory RISC-V: Support for kexec_file on panic RISC-V: Add kexec_file support RISC-V: use memcpy for kexec_file mode kexec_file: Fix kexec_file.c build error for riscv platform riscv: compat: Add COMPAT Kbuild skeletal support riscv: compat: ptrace: Add compat_arch_ptrace implement riscv: compat: signal: Add rt_frame implementation riscv: add memory-type errata for T-Head ... |
||
|
Juerg Haefliger
|
31f12fdc2f |
MIPS: Kconfig: Fix indentation and add endif comment
The convention for indentation seems to be a single tab. Help text is further indented by an additional two whitespaces. Fix the lines that violate these rules. While add it, add a missing trailing endif comment. Signed-off-by: Juerg Haefliger <juergh@canonical.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> |
||
|
Guo Ren
|
0cbed0ee1d
|
arch: Add SYSVIPC_COMPAT for all architectures
The existing per-arch definitions are pretty much historic cruft. Move SYSVIPC_COMPAT into init/Kconfig. Signed-off-by: Guo Ren <guoren@linux.alibaba.com> Signed-off-by: Guo Ren <guoren@kernel.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Helge Deller <deller@gmx.de> # parisc Link: https://lore.kernel.org/r/20220405071314.3225832-5-guoren@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
|
Feiyang Chen
|
f8f9f21c78 |
MIPS: Fix build error for loongson64 and sgi-ip27
Select HAVE_ARCH_NODEDATA_EXTENSION for loongson64 to fix build error when CONFIG_NUMA=y: mips64el-unknown-linux-gnu-ld: mm/page_alloc.o: in function `free_area_init': (.init.text+0x1714): undefined reference to `node_data' mips64el-unknown-linux-gnu-ld: (.init.text+0x1730): undefined reference to `node_data' Also, select HAVE_ARCH_NODEDATA_EXTENSION for sgi-ip27 to fix build error: mips64el-unknown-linux-gnu-ld: mm/page_alloc.o: in function `free_area_init': page_alloc.c:(.init.text+0x1ba8): undefined reference to `node_data' mips64el-unknown-linux-gnu-ld: page_alloc.c:(.init.text+0x1bcc): undefined reference to `node_data' mips64el-unknown-linux-gnu-ld: page_alloc.c:(.init.text+0x1be4): undefined reference to `node_data' mips64el-unknown-linux-gnu-ld: page_alloc.c:(.init.text+0x1bf4): undefined reference to `node_data' Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn> Reviewed-by: Huacai Chen <chenhuacai@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> |
||
|
Kees Cook
|
b847bd64ea |
MIPS: Only use current_stack_pointer on GCC
Unfortunately, Clang did not have support for "sp" as a global register
definition, and was crashing after the addition of current_stack_pointer.
This has been fixed in Clang 14, but earlier Clang versions need to
avoid this code, so add a versioned test and revert back to the
open-coded asm instances. Fixes Clang build error:
fatal error: error in backend: Invalid register name global variable
Fixes:
|
||
|
Xi Ruoyao
|
3f059a7e8c |
mips: remove reference to "newer Loongson-3"
Newest Loongson-3 processors have moved to use LoongArch architecture. Sadly, the LL/SC issue is still existing on both latest Loongson-3 processors using MIPS64 (Loongson-3A4000) and LoongArch (Loongson-3A5000). As it's very unlikely there will be new Loongson-3 processors using MIPS64, let's stop people from false hoping. Signed-off-by: Xi Ruoyao <xry111@mengyan1223.wang> Cc: Huacai Chen <chenhuacai@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> |
||
|
Kees Cook
|
200ed341b8 |
mips: Implement "current_stack_pointer"
To follow the existing per-arch conventions replace open-coded uses of asm "sp" as "current_stack_pointer". This will let it be used in non-arch places (like HARDENED_USERCOPY). Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Marc Zyngier <maz@kernel.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Yanteng Si <siyanteng01@gmail.com> Cc: linux-mips@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> |
||
|
Thomas Bogendoerfer
|
455481fc9a |
MIPS: Remove TX39XX support
No (active) developer owns this hardware, so let's remove Linux support. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Acked-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> |
||
|
Thomas Bogendoerfer
|
b56d1cafef |
MIPS: remove asm/war.h
The major part for workaround handling has already moved to config options. This change replaces the remaining defines by already available config options and gets rid of war.h Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> |
||
|
Nemanja Rakovic
|
e0a8b93efa |
mips: Enable KCSAN
This patch enables KCSAN for the 64-bit version. Updated rules for the incompatible compilation units (vdso, boot/compressed). Signed-off-by: Nemanja Rakovic <nemanja.rakovic@syrmia.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> |
||
|
Nathan Chancellor
|
d49fc69293 |
MIPS: Loongson{2ef,64}: Wrap -mno-branch-likely with cc-option
This flag is not supported by clang, which results in a warning: clang-14: warning: argument unused during compilation: '-mno-branch-likely' [-Wunused-command-line-argument] This breaks cc-option, which adds -Werror to make this warning fatal and catch flags that are not supported. Wrap this flag in cc-option so that it does not cause cc-option to fail, which can cause randconfigs to be really noisy, due to warnings not getting disabled that should be. Additionally, move the cc-option check to Kconfig so that the check is done at configuration time, rather than build time, as builds with no configuration change will be quicker because the cc-option call will not need to happen in those instances. Suggested-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> |
||
|
Linus Torvalds
|
3689f9f8b0 |
bitmap patches for 5.17-rc1
-----BEGIN PGP SIGNATURE-----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=RKW4
-----END PGP SIGNATURE-----
Merge tag 'bitmap-5.17-rc1' of git://github.com/norov/linux
Pull bitmap updates from Yury Norov:
- introduce for_each_set_bitrange()
- use find_first_*_bit() instead of find_next_*_bit() where possible
- unify for_each_bit() macros
* tag 'bitmap-5.17-rc1' of git://github.com/norov/linux:
vsprintf: rework bitmap_list_string
lib: bitmap: add performance test for bitmap_print_to_pagebuf
bitmap: unify find_bit operations
mm/percpu: micro-optimize pcpu_is_populated()
Replace for_each_*_bit_from() with for_each_*_bit() where appropriate
find: micro-optimize for_each_{set,clear}_bit()
include/linux: move for_each_bit() macros from bitops.h to find.h
cpumask: replace cpumask_next_* with cpumask_first_* where appropriate
tools: sync tools/bitmap with mother linux
all: replace find_next{,_zero}_bit with find_first{,_zero}_bit where appropriate
cpumask: use find_first_and_bit()
lib: add find_first_and_bit()
arch: remove GENERIC_FIND_FIRST_BIT entirely
include: move find.h from asm_generic to linux
bitops: move find_bit_*_le functions from le.h to find.h
bitops: protect find_first_{,zero}_bit properly
|
||
|
Linus Torvalds
|
f4484d138b |
Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton: "55 patches. Subsystems affected by this patch series: percpu, procfs, sysctl, misc, core-kernel, get_maintainer, lib, checkpatch, binfmt, nilfs2, hfs, fat, adfs, panic, delayacct, kconfig, kcov, and ubsan" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (55 commits) lib: remove redundant assignment to variable ret ubsan: remove CONFIG_UBSAN_OBJECT_SIZE kcov: fix generic Kconfig dependencies if ARCH_WANTS_NO_INSTR lib/Kconfig.debug: make TEST_KMOD depend on PAGE_SIZE_LESS_THAN_256KB btrfs: use generic Kconfig option for 256kB page size limit arch/Kconfig: split PAGE_SIZE_LESS_THAN_256KB from PAGE_SIZE_LESS_THAN_64KB configs: introduce debug.config for CI-like setup delayacct: track delays from memory compact Documentation/accounting/delay-accounting.rst: add thrashing page cache and direct compact delayacct: cleanup flags in struct task_delay_info and functions use it delayacct: fix incomplete disable operation when switch enable to disable delayacct: support swapin delay accounting for swapping without blkio panic: remove oops_id panic: use error_report_end tracepoint on warnings fs/adfs: remove unneeded variable make code cleaner FAT: use io_schedule_timeout() instead of congestion_wait() hfsplus: use struct_group_attr() for memcpy() region nilfs2: remove redundant pointer sbufs fs/binfmt_elf: use PT_LOAD p_align values for static PIE const_structs.checkpatch: add frequently used ops structs ... |
||
|
Kefeng Wang
|
7ecd19cfdf |
mm: percpu: generalize percpu related config
Patch series "mm: percpu: Cleanup percpu first chunk function".
When supporting page mapping percpu first chunk allocator on arm64, we
found there are lots of duplicated codes in percpu embed/page first chunk
allocator. This patchset is aimed to cleanup them and should no function
change.
The currently supported status about 'embed' and 'page' in Archs shows
below,
embed: NEED_PER_CPU_PAGE_FIRST_CHUNK
page: NEED_PER_CPU_EMBED_FIRST_CHUNK
embed page
------------------------
arm64 Y Y
mips Y N
powerpc Y Y
riscv Y N
sparc Y Y
x86 Y Y
------------------------
There are two interfaces about percpu first chunk allocator,
extern int __init pcpu_embed_first_chunk(size_t reserved_size, size_t dyn_size,
size_t atom_size,
pcpu_fc_cpu_distance_fn_t cpu_distance_fn,
- pcpu_fc_alloc_fn_t alloc_fn,
- pcpu_fc_free_fn_t free_fn);
+ pcpu_fc_cpu_to_node_fn_t cpu_to_nd_fn);
extern int __init pcpu_page_first_chunk(size_t reserved_size,
- pcpu_fc_alloc_fn_t alloc_fn,
- pcpu_fc_free_fn_t free_fn,
- pcpu_fc_populate_pte_fn_t populate_pte_fn);
+ pcpu_fc_cpu_to_node_fn_t cpu_to_nd_fn);
The pcpu_fc_alloc_fn_t/pcpu_fc_free_fn_t is killed, we provide generic
pcpu_fc_alloc() and pcpu_fc_free() function, which are called in the
pcpu_embed/page_first_chunk().
1) For pcpu_embed_first_chunk(), pcpu_fc_cpu_to_node_fn_t is needed to be
provided when archs supported NUMA.
2) For pcpu_page_first_chunk(), the pcpu_fc_populate_pte_fn_t is killed too,
a generic pcpu_populate_pte() which marked '__weak' is provided, if you
need a different function to populate pte on the arch(like x86), please
provide its own implementation.
[1] https://github.com/kevin78/linux.git percpu-cleanup
This patch (of 4):
The HAVE_SETUP_PER_CPU_AREA/NEED_PER_CPU_EMBED_FIRST_CHUNK/
NEED_PER_CPU_PAGE_FIRST_CHUNK/USE_PERCPU_NUMA_NODE_ID configs, which have
duplicate definitions on platforms that subscribe it.
Move them into mm, drop these redundant definitions and instead just
select it on applicable platforms.
Link: https://lkml.kernel.org/r/20211216112359.103822-1-wangkefeng.wang@huawei.com
Link: https://lkml.kernel.org/r/20211216112359.103822-2-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64]
Cc: Will Deacon <will@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Yury Norov
|
c126a53c27 |
arch: remove GENERIC_FIND_FIRST_BIT entirely
In 5.12 cycle we enabled GENERIC_FIND_FIRST_BIT config option for ARM64 and MIPS. It increased performance and shrunk .text size; and so far I didn't receive any negative feedback on the change. https://lore.kernel.org/linux-arch/20210225135700.1381396-1-yury.norov@gmail.com/ Now I think it's a good time to switch all architectures to use find_{first,last}_bit() unconditionally, and so remove corresponding config option. The patch does't introduce functioal changes for arc, arm, arm64, mips, m68k, s390 and x86, for other architectures I expect improvement both in performance and .text size. Signed-off-by: Yury Norov <yury.norov@gmail.com> Tested-by: Alexander Lobakin <alobakin@pm.me> (mips) Reviewed-by: Alexander Lobakin <alobakin@pm.me> (mips) Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Will Deacon <will@kernel.org> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> |
||
|
Jim Quinlan
|
d552ddeaab |
MIPS: bmips: Remove obsolete DMA mapping support
The code in 'arch/mips/bmips/dma.c' performed DMA mapping for inbound regions. This mapping was and is required for the Broadcom STB PCIe controller HW. This code is removed as the current 'struct device' has a @dma_range_map field which performs the same functionality by processing the "dma-ranges" DT property. Subsequently, ARCH_HAS_PHYS_TO_DMA is now unset since the dma_to_phys() and phys_to_dma() functions are removed. Signed-off-by: Jim Quinlan <jim2101024@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> |
||
|
YunQiang Su
|
79876cc1d7 |
MIPS: new Kconfig option ZBOOT_LOAD_ADDRESS
If this option is not 0x0, it will be used for zboot load address. Otherwise, the result of calc_vmlinuz_load_addr will be used. The zload-y value for generic are also removed then, as the current value breaks booting on qemu -M boston. The result of calc_vmlinuz_load_addr works well for most of cases. The default value of bcm47xx keeps as it currently. Signed-off-by: YunQiang Su <yunqiang.su@cipunited.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> |
||
|
Lukas Bulwahn
|
a670c82d9c |
mips: fix Kconfig reference to PHYS_ADDR_T_64BIT
Commit |
||
|
Lukas Bulwahn
|
bb900d43e2 |
mips: remove obsolete selection of CPU_HAS_LOAD_STORE_LR
Commit |
||
|
Lukas Bulwahn
|
7432024781 |
mips: drop selecting non-existing config NR_CPUS_DEFAULT_2
Commit |
||
|
Lukas Bulwahn
|
fd4eb90b16 |
mips: add SYS_HAS_CPU_MIPS64_R5 config for MIPS Release 5 support
Commit |
||
|
Sander Vanheule
|
6fb8a1b320 |
MIPS: drop selected EARLY_PRINTK configs for MACH_REALTEK_RTL
MACH_REALTEK_RTL declares that the system supports early printk , but this is not actually implemented as intended. The system is left with a non-functional early0 console because the setup_8250_early_printk_port() call provided for MIPS_GENERIC is never used to set this up. Generic ns16550a earlycon works, so devices should use that for early output. This means that SYS_HAS_EARLY_PRINTK and USE_GENERIC_EARLY_PRINTK_8250 do not need to be selected. Additionally, as reported by Lukas Bulwahn, the selected symbol SYS_HAS_EARLY_PRINTK_8250 does not actually exist, so should also be dropped. Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com> Cc: Bert Vermeulen <bert@biot.com> Signed-off-by: Sander Vanheule <sander@svanheule.net> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> |
||
|
Huang Pei
|
41ce097f71 |
MIPS: use 3-level pgtable for 64KB page size on MIPS_VA_BITS_48
It hangup when booting Loongson 3A1000 with BOTH
CONFIG_PAGE_SIZE_64KB and CONFIG_MIPS_VA_BITS_48, that it turn
out to use 2-level pgtable instead of 3-level. 64KB page size
with 2-level pgtable only cover 42 bits VA, use 3-level pgtable
to cover all 48 bits VA(55 bits)
Fixes:
|
||
|
Linus Torvalds
|
4218a96faf |
- Config updates for BMIPS platform
- Build fixes - Makefile cleanups -----BEGIN PGP SIGNATURE----- iQJOBAABCAA4FiEEbt46xwy6kEcDOXoUeZbBVTGwZHAFAmGORGgaHHRzYm9nZW5k QGFscGhhLmZyYW5rZW4uZGUACgkQeZbBVTGwZHAUhA/7Bcld/5bmuu5foBglRaaT PDO+99v274ZD7Yprk8LRBT8Ix1zrF3fXaUBaV0CCN0vBAzTyNQ2cY0gbJBxUQlQ8 wgWPijO5fg6sBuSaCGLqBg0N8yyGBEbQQJ9LR3kYYVzp5Q7YJ1E+R7J2eiCcc9mC geKAU9gzDN9g/vAEk0BVkKbhNAlEXxCk3rEUflvJdPW9f4lChkB8IW3lhnM5iMVy fx4qkl2MV9X3GIQyzcfJ+jrDeDloxStaHyP+fiNSFFW9g7R+UuncSXU4qvYVNH0C mRUkMj6kL7xeGDLo7dwVcEUrvAT2+e7QR6GezD7nGRvBZnuUO5R6SDzU6QljUHXf uH6raEhAz+ncmCRs8s32y9wYRAp1LDYFKsN1jLo8pHvhNJ8zSD3kAvC+BDfCILY2 BD+gIRlwR/jWKSF1iJW/Cb2wCHOMz0WwZnESH4wFeGPcDjoZo0ZHtKj5OXE8u5pT UFROzxbYRCluhN8wHwQWUtGG+TVo5ZZc3mr5V3g84Mo6C/wp2uAy1+R9zV3BZiT8 dmqwktmNr8iS+FAErppVmiWnDCRU6lxPdHiFF884xu6UO7cLPLMI1lJLyXXO9AkS PNpw96cOMX8cDHn3jabpRhKKtaDjjeMihC3OVxQz6fTqFwzNlLzdSz1uuu3Ho4BP 4USpyQs6nL0OTxxT46CXUz0= =6xdH -----END PGP SIGNATURE----- Merge tag 'mips_5.16_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull more MIPS updates from Thomas Bogendoerfer: - Config updates for BMIPS platform - Build fixes - Makefile cleanups * tag 'mips_5.16_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: mips: decompressor: do not copy source files while building MIPS: boot/compressed/: add __bswapdi2() to target for ZSTD decompression MIPS: fix duplicated slashes for Platform file path MIPS: fix *-pkg builds for loongson2ef platform PCI: brcmstb: Allow building for BMIPS_GENERIC MIPS: BMIPS: Enable PCI Kconfig MIPS: VDSO: remove -nostdlib compiler flag mips: BCM63XX: ensure that CPU_SUPPORTS_32BIT_KERNEL is set MIPS: Update bmips_stb_defconfig MIPS: Allow modules to set board_be_handler |
||
|
Florian Fainelli
|
1d987052e3 |
MIPS: BMIPS: Enable PCI Kconfig
Enable HAVE_PCI and PCI_DRIVERS_GENERIC so we can build PCIE_BRCMSTB which is the PCIe host bridge driver for this platform. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> |
||
|
Randy Dunlap
|
5eeaafc8d6 |
mips: BCM63XX: ensure that CPU_SUPPORTS_32BIT_KERNEL is set
Several header files need info on CONFIG_32BIT or CONFIG_64BIT,
but kconfig symbol BCM63XX does not provide that info. This leads
to many build errors, e.g.:
arch/mips/include/asm/page.h:196:13: error: use of undeclared identifier 'CAC_BASE'
return x - PAGE_OFFSET + PHYS_OFFSET;
arch/mips/include/asm/mach-generic/spaces.h:91:23: note: expanded from macro 'PAGE_OFFSET'
#define PAGE_OFFSET (CAC_BASE + PHYS_OFFSET)
arch/mips/include/asm/io.h:134:28: error: use of undeclared identifier 'CAC_BASE'
return (void *)(address + PAGE_OFFSET - PHYS_OFFSET);
arch/mips/include/asm/mach-generic/spaces.h:91:23: note: expanded from macro 'PAGE_OFFSET'
#define PAGE_OFFSET (CAC_BASE + PHYS_OFFSET)
arch/mips/include/asm/uaccess.h:82:10: error: use of undeclared identifier '__UA_LIMIT'
return (__UA_LIMIT & (addr | (addr + size) | __ua_size(size))) == 0;
Selecting the SYS_HAS_CPU_BMIPS* symbols causes SYS_HAS_CPU_BMIPS to be
set, which then selects CPU_SUPPORT_32BIT_KERNEL, which causes
CONFIG_32BIT to be set. (a bit more indirect than v1 [RFC].)
Fixes:
|
||
|
Linus Torvalds
|
a3f3677380 |
- added printing of CPU options for /proc/cpuinfo
- removed support for Netlogic SOCs - fixes and cleanup -----BEGIN PGP SIGNATURE----- iQJOBAABCAA4FiEEbt46xwy6kEcDOXoUeZbBVTGwZHAFAmGE6OEaHHRzYm9nZW5k QGFscGhhLmZyYW5rZW4uZGUACgkQeZbBVTGwZHA3zQ//Ze+qwFP53nl21DTx+viH 1wvoy+rMa95Udrzf8/Mp8qskZG9Jq2UKskYeWPq2cgMD2X7JSh8b0Xz3O9K8XxKD a21jGoY61np7HHl9XOhYD7A87DvrHS2VrYh6IiN9tqV5tK0x7uzYnH0pJDqhU4im 0zDtnnvVDvUPU9EDEusD8xPaKHquQXEd0JyNXLo+hvuwc1RZ2VckjE8dsS3I0kn2 2Sz4j7K/e1hB85vE1LXuuU8cL8IuMpDxkDnK6STA7mzNBPAdqnClnKuB70zjnwp0 lCjZBWmSeVIqCEdoerB7wgn1g+8k/1TBbCoqtN2poQMiLBUKFbfv5gXg3Uei0SDa Q/c3od8Mr2jn39EbG5/cf0FOyuKtLDFvGXASaSuW7Xhvn3ue4I6MrKh2bb5nimXP 3ShvsvYfoc2cGSz7Pt7tOCP6WHFlIi+9wjZEr8XZlGhJE6BgE4CbJHA3/Q4VAl+Q 4whAcNldSX+sVS/dSHPo0s/9eLCPm1EWulD8mBpvj27cmeUVhqXCIY34Df7aIDBi F1+rFxt6/uDTDEJp3PkwkmVJuyzivN5CcXl4xks/MaJ/8BgYZVRbafyGlJxm+MMf ufAXvfiwZhyVg4cHajtMiFO2m1itmoyg3CvIffiVZMbegqy4Dsu+ZIf0csPmGheK 88AfVKBfrRwrJG1yK2iX/Dw= =mvn0 -----END PGP SIGNATURE----- Merge tag 'mips_5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS updates from Thomas Bogendoerfer: - added printing of CPU options for /proc/cpuinfo - removed support for Netlogic SOCs - fixes and cleanup * tag 'mips_5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: Cobalt: Explain GT64111 early PCI fixup mips: fix HUGETLB function without THP enabled mips: cm: Convert to bitfield API to fix out-of-bounds access MIPS: Remove NETLOGIC support MIPS: kernel: proc: add CPU option reporting MIPS: kernel: proc: use seq_puts instead of seq_printf MIPS: kernel: proc: fix trivial style errors MIPS: Fix assembly error from MIPSr2 code used within MIPS_ISA_ARCH_LEVEL MIPS: octeon: Remove unused functions MIPS: Loongson64: Add of_node_put() before break bcm47xx: Replace printk(KERN_ALERT ... pci_devname(dev)) with pci_alert() bcm47xx: Get rid of redundant 'else' MIPS: sni: Fix the build MIPS: Avoid macro redefinitions MIPS: loongson64: Fix no screen display during boot-up MIPS: loongson64: make CPU_LOONGSON64 depends on MIPS_FP_SUPPORT |
||
|
Linus Torvalds
|
fc02cb2b37 |
Core:
- Remove socket skb caches
- Add a SO_RESERVE_MEM socket op to forward allocate buffer space
and avoid memory accounting overhead on each message sent
- Introduce managed neighbor entries - added by control plane and
resolved by the kernel for use in acceleration paths (BPF / XDP
right now, HW offload users will benefit as well)
- Make neighbor eviction on link down controllable by userspace
to work around WiFi networks with bad roaming implementations
- vrf: Rework interaction with netfilter/conntrack
- fq_codel: implement L4S style ce_threshold_ect1 marking
- sch: Eliminate unnecessary RCU waits in mini_qdisc_pair_swap()
BPF:
- Add support for new btf kind BTF_KIND_TAG, arbitrary type tagging
as implemented in LLVM14
- Introduce bpf_get_branch_snapshot() to capture Last Branch Records
- Implement variadic trace_printk helper
- Add a new Bloomfilter map type
- Track <8-byte scalar spill and refill
- Access hw timestamp through BPF's __sk_buff
- Disallow unprivileged BPF by default
- Document BPF licensing
Netfilter:
- Introduce egress hook for looking at raw outgoing packets
- Allow matching on and modifying inner headers / payload data
- Add NFT_META_IFTYPE to match on the interface type either from
ingress or egress
Protocols:
- Multi-Path TCP:
- increase default max additional subflows to 2
- rework forward memory allocation
- add getsockopts: MPTCP_INFO, MPTCP_TCPINFO, MPTCP_SUBFLOW_ADDRS
- MCTP flow support allowing lower layer drivers to configure msg
muxing as needed
- Automatic Multicast Tunneling (AMT) driver based on RFC7450
- HSR support the redbox supervision frames (IEC-62439-3:2018)
- Support for the ip6ip6 encapsulation of IOAM
- Netlink interface for CAN-FD's Transmitter Delay Compensation
- Support SMC-Rv2 eliminating the current same-subnet restriction,
by exploiting the UDP encapsulation feature of RoCE adapters
- TLS: add SM4 GCM/CCM crypto support
- Bluetooth: initial support for link quality and audio/codec
offload
Driver APIs:
- Add a batched interface for RX buffer allocation in AF_XDP
buffer pool
- ethtool: Add ability to control transceiver modules' power mode
- phy: Introduce supported interfaces bitmap to express MAC
capabilities and simplify PHY code
- Drop rtnl_lock from DSA .port_fdb_{add,del} callbacks
New drivers:
- WiFi driver for Realtek 8852AE 802.11ax devices (rtw89)
- Ethernet driver for ASIX AX88796C SPI device (x88796c)
Drivers:
- Broadcom PHYs
- support 72165, 7712 16nm PHYs
- support IDDQ-SR for additional power savings
- PHY support for QCA8081, QCA9561 PHYs
- NXP DPAA2: support for IRQ coalescing
- NXP Ethernet (enetc): support for software TCP segmentation
- Renesas Ethernet (ravb) - support DMAC and EMAC blocks of
Gigabit-capable IP found on RZ/G2L SoC
- Intel 100G Ethernet
- support for eswitch offload of TC/OvS flow API, including
offload of GRE, VxLAN, Geneve tunneling
- support application device queues - ability to assign Rx and Tx
queues to application threads
- PTP and PPS (pulse-per-second) extensions
- Broadcom Ethernet (bnxt)
- devlink health reporting and device reload extensions
- Mellanox Ethernet (mlx5)
- offload macvlan interfaces
- support HW offload of TC rules involving OVS internal ports
- support HW-GRO and header/data split
- support application device queues
- Marvell OcteonTx2:
- add XDP support for PF
- add PTP support for VF
- Qualcomm Ethernet switch (qca8k): support for QCA8328
- Realtek Ethernet DSA switch (rtl8366rb)
- support bridge offload
- support STP, fast aging, disabling address learning
- support for Realtek RTL8365MB-VC, a 4+1 port 10M/100M/1GE switch
- Mellanox Ethernet/IB switch (mlxsw)
- multi-level qdisc hierarchy offload (e.g. RED, prio and shaping)
- offload root TBF qdisc as port shaper
- support multiple routing interface MAC address prefixes
- support for IP-in-IP with IPv6 underlay
- MediaTek WiFi (mt76)
- mt7921 - ASPM, 6GHz, SDIO and testmode support
- mt7915 - LED and TWT support
- Qualcomm WiFi (ath11k)
- include channel rx and tx time in survey dump statistics
- support for 80P80 and 160 MHz bandwidths
- support channel 2 in 6 GHz band
- spectral scan support for QCN9074
- support for rx decapsulation offload (data frames in 802.3
format)
- Qualcomm phone SoC WiFi (wcn36xx)
- enable Idle Mode Power Save (IMPS) to reduce power consumption
during idle
- Bluetooth driver support for MediaTek MT7922 and MT7921
- Enable support for AOSP Bluetooth extension in Qualcomm WCN399x
and Realtek 8822C/8852A
- Microsoft vNIC driver (mana)
- support hibernation and kexec
- Google vNIC driver (gve)
- support for jumbo frames
- implement Rx page reuse
Refactor:
- Make all writes to netdev->dev_addr go thru helpers, so that we
can add this address to the address rbtree and handle the updates
- Various TCP cleanups and optimizations including improvements
to CPU cache use
- Simplify the gnet_stats, Qdisc stats' handling and remove
qdisc->running sequence counter
- Driver changes and API updates to address devlink locking
deficiencies
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=srde
-----END PGP SIGNATURE-----
Merge tag 'net-next-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Remove socket skb caches
- Add a SO_RESERVE_MEM socket op to forward allocate buffer space and
avoid memory accounting overhead on each message sent
- Introduce managed neighbor entries - added by control plane and
resolved by the kernel for use in acceleration paths (BPF / XDP
right now, HW offload users will benefit as well)
- Make neighbor eviction on link down controllable by userspace to
work around WiFi networks with bad roaming implementations
- vrf: Rework interaction with netfilter/conntrack
- fq_codel: implement L4S style ce_threshold_ect1 marking
- sch: Eliminate unnecessary RCU waits in mini_qdisc_pair_swap()
BPF:
- Add support for new btf kind BTF_KIND_TAG, arbitrary type tagging
as implemented in LLVM14
- Introduce bpf_get_branch_snapshot() to capture Last Branch Records
- Implement variadic trace_printk helper
- Add a new Bloomfilter map type
- Track <8-byte scalar spill and refill
- Access hw timestamp through BPF's __sk_buff
- Disallow unprivileged BPF by default
- Document BPF licensing
Netfilter:
- Introduce egress hook for looking at raw outgoing packets
- Allow matching on and modifying inner headers / payload data
- Add NFT_META_IFTYPE to match on the interface type either from
ingress or egress
Protocols:
- Multi-Path TCP:
- increase default max additional subflows to 2
- rework forward memory allocation
- add getsockopts: MPTCP_INFO, MPTCP_TCPINFO, MPTCP_SUBFLOW_ADDRS
- MCTP flow support allowing lower layer drivers to configure msg
muxing as needed
- Automatic Multicast Tunneling (AMT) driver based on RFC7450
- HSR support the redbox supervision frames (IEC-62439-3:2018)
- Support for the ip6ip6 encapsulation of IOAM
- Netlink interface for CAN-FD's Transmitter Delay Compensation
- Support SMC-Rv2 eliminating the current same-subnet restriction, by
exploiting the UDP encapsulation feature of RoCE adapters
- TLS: add SM4 GCM/CCM crypto support
- Bluetooth: initial support for link quality and audio/codec offload
Driver APIs:
- Add a batched interface for RX buffer allocation in AF_XDP buffer
pool
- ethtool: Add ability to control transceiver modules' power mode
- phy: Introduce supported interfaces bitmap to express MAC
capabilities and simplify PHY code
- Drop rtnl_lock from DSA .port_fdb_{add,del} callbacks
New drivers:
- WiFi driver for Realtek 8852AE 802.11ax devices (rtw89)
- Ethernet driver for ASIX AX88796C SPI device (x88796c)
Drivers:
- Broadcom PHYs
- support 72165, 7712 16nm PHYs
- support IDDQ-SR for additional power savings
- PHY support for QCA8081, QCA9561 PHYs
- NXP DPAA2: support for IRQ coalescing
- NXP Ethernet (enetc): support for software TCP segmentation
- Renesas Ethernet (ravb) - support DMAC and EMAC blocks of
Gigabit-capable IP found on RZ/G2L SoC
- Intel 100G Ethernet
- support for eswitch offload of TC/OvS flow API, including
offload of GRE, VxLAN, Geneve tunneling
- support application device queues - ability to assign Rx and Tx
queues to application threads
- PTP and PPS (pulse-per-second) extensions
- Broadcom Ethernet (bnxt)
- devlink health reporting and device reload extensions
- Mellanox Ethernet (mlx5)
- offload macvlan interfaces
- support HW offload of TC rules involving OVS internal ports
- support HW-GRO and header/data split
- support application device queues
- Marvell OcteonTx2:
- add XDP support for PF
- add PTP support for VF
- Qualcomm Ethernet switch (qca8k): support for QCA8328
- Realtek Ethernet DSA switch (rtl8366rb)
- support bridge offload
- support STP, fast aging, disabling address learning
- support for Realtek RTL8365MB-VC, a 4+1 port 10M/100M/1GE switch
- Mellanox Ethernet/IB switch (mlxsw)
- multi-level qdisc hierarchy offload (e.g. RED, prio and shaping)
- offload root TBF qdisc as port shaper
- support multiple routing interface MAC address prefixes
- support for IP-in-IP with IPv6 underlay
- MediaTek WiFi (mt76)
- mt7921 - ASPM, 6GHz, SDIO and testmode support
- mt7915 - LED and TWT support
- Qualcomm WiFi (ath11k)
- include channel rx and tx time in survey dump statistics
- support for 80P80 and 160 MHz bandwidths
- support channel 2 in 6 GHz band
- spectral scan support for QCN9074
- support for rx decapsulation offload (data frames in 802.3
format)
- Qualcomm phone SoC WiFi (wcn36xx)
- enable Idle Mode Power Save (IMPS) to reduce power consumption
during idle
- Bluetooth driver support for MediaTek MT7922 and MT7921
- Enable support for AOSP Bluetooth extension in Qualcomm WCN399x and
Realtek 8822C/8852A
- Microsoft vNIC driver (mana)
- support hibernation and kexec
- Google vNIC driver (gve)
- support for jumbo frames
- implement Rx page reuse
Refactor:
- Make all writes to netdev->dev_addr go thru helpers, so that we can
add this address to the address rbtree and handle the updates
- Various TCP cleanups and optimizations including improvements to
CPU cache use
- Simplify the gnet_stats, Qdisc stats' handling and remove
qdisc->running sequence counter
- Driver changes and API updates to address devlink locking
deficiencies"
* tag 'net-next-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2122 commits)
Revert "net: avoid double accounting for pure zerocopy skbs"
selftests: net: add arp_ndisc_evict_nocarrier
net: ndisc: introduce ndisc_evict_nocarrier sysctl parameter
net: arp: introduce arp_evict_nocarrier sysctl parameter
libbpf: Deprecate AF_XDP support
kbuild: Unify options for BTF generation for vmlinux and modules
selftests/bpf: Add a testcase for 64-bit bounds propagation issue.
bpf: Fix propagation of signed bounds from 64-bit min/max into 32-bit.
bpf: Fix propagation of bounds from 64-bit min/max into 32-bit and var_off.
net: vmxnet3: remove multiple false checks in vmxnet3_ethtool.c
net: avoid double accounting for pure zerocopy skbs
tcp: rename sk_wmem_free_skb
netdevsim: fix uninit value in nsim_drv_configure_vfs()
selftests/bpf: Fix also no-alu32 strobemeta selftest
bpf: Add missing map_delete_elem method to bloom filter map
selftests/bpf: Add bloom map success test for userspace calls
bpf: Add alignment padding for "map_extra" + consolidate holes
bpf: Bloom filter map naming fixups
selftests/bpf: Add test cases for struct_ops prog
bpf: Add dummy BPF STRUCT_OPS for test purpose
...
|
||
|
Jakub Kicinski
|
b7b98f8689 |
Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Alexei Starovoitov says: ==================== pull-request: bpf-next 2021-11-01 We've added 181 non-merge commits during the last 28 day(s) which contain a total of 280 files changed, 11791 insertions(+), 5879 deletions(-). The main changes are: 1) Fix bpf verifier propagation of 64-bit bounds, from Alexei. 2) Parallelize bpf test_progs, from Yucong and Andrii. 3) Deprecate various libbpf apis including af_xdp, from Andrii, Hengqi, Magnus. 4) Improve bpf selftests on s390, from Ilya. 5) bloomfilter bpf map type, from Joanne. 6) Big improvements to JIT tests especially on Mips, from Johan. 7) Support kernel module function calls from bpf, from Kumar. 8) Support typeless and weak ksym in light skeleton, from Kumar. 9) Disallow unprivileged bpf by default, from Pawan. 10) BTF_KIND_DECL_TAG support, from Yonghong. 11) Various bpftool cleanups, from Quentin. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (181 commits) libbpf: Deprecate AF_XDP support kbuild: Unify options for BTF generation for vmlinux and modules selftests/bpf: Add a testcase for 64-bit bounds propagation issue. bpf: Fix propagation of signed bounds from 64-bit min/max into 32-bit. bpf: Fix propagation of bounds from 64-bit min/max into 32-bit and var_off. selftests/bpf: Fix also no-alu32 strobemeta selftest bpf: Add missing map_delete_elem method to bloom filter map selftests/bpf: Add bloom map success test for userspace calls bpf: Add alignment padding for "map_extra" + consolidate holes bpf: Bloom filter map naming fixups selftests/bpf: Add test cases for struct_ops prog bpf: Add dummy BPF STRUCT_OPS for test purpose bpf: Factor out helpers for ctx access checking bpf: Factor out a helper to prepare trampoline for struct_ops prog selftests, bpf: Fix broken riscv build riscv, libbpf: Add RISC-V (RV64) support to bpf_tracing.h tools, build: Add RISC-V to HOSTARCH parsing riscv, bpf: Increase the maximum number of iterations selftests, bpf: Add one test for sockmap with strparser selftests, bpf: Fix test_txmsg_ingress_parser error ... ==================== Link: https://lore.kernel.org/r/20211102013123.9005-1-alexei.starovoitov@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Linus Torvalds
|
5a47ebe98e |
Updates for the interrupt subsystem:
Core changes:
- Prevent a potential deadlock when initial priority is assigned to a
newly created interrupt thread. A recent change to plug a race between
cpuset and __sched_setscheduler() introduced a new lock dependency
which is now triggered. Break the lock dependency chain by moving the
priority assignment to the thread function.
- A couple of small updates to make the irq core RT safe.
- Confine the irq_cpu_online/offline() API to the only left unfixable
user Cavium Octeon so that it does not grow new usage.
- A small documentation update
Driver changes:
- A large cross architecture rework to move irq_enter/exit() into the
architecture code to make addressing the NOHZ_FULL/RCU issues simpler.
- The obligatory new irq chip driver for Microchip EIC
- Modularize a few irq chip drivers
- Expand usage of devm_*() helpers throughout the driver code
- The usual small fixes and improvements all over the place
-----BEGIN PGP SIGNATURE-----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=r6ln
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2021-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Updates for the interrupt subsystem:
Core changes:
- Prevent a potential deadlock when initial priority is assigned to a
newly created interrupt thread. A recent change to plug a race
between cpuset and __sched_setscheduler() introduced a new lock
dependency which is now triggered. Break the lock dependency chain
by moving the priority assignment to the thread function.
- A couple of small updates to make the irq core RT safe.
- Confine the irq_cpu_online/offline() API to the only left unfixable
user Cavium Octeon so that it does not grow new usage.
- A small documentation update
Driver changes:
- A large cross architecture rework to move irq_enter/exit() into the
architecture code to make addressing the NOHZ_FULL/RCU issues
simpler.
- The obligatory new irq chip driver for Microchip EIC
- Modularize a few irq chip drivers
- Expand usage of devm_*() helpers throughout the driver code
- The usual small fixes and improvements all over the place"
* tag 'irq-core-2021-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits)
h8300: Fix linux/irqchip.h include mess
dt-bindings: irqchip: renesas-irqc: Document r8a774e1 bindings
MIPS: irq: Avoid an unused-variable error
genirq: Hide irq_cpu_{on,off}line() behind a deprecated option
irqchip/mips-gic: Get rid of the reliance on irq_cpu_online()
MIPS: loongson64: Drop call to irq_cpu_offline()
irq: remove handle_domain_{irq,nmi}()
irq: remove CONFIG_HANDLE_DOMAIN_IRQ_IRQENTRY
irq: riscv: perform irqentry in entry code
irq: openrisc: perform irqentry in entry code
irq: csky: perform irqentry in entry code
irq: arm64: perform irqentry in entry code
irq: arm: perform irqentry in entry code
irq: add a (temporary) CONFIG_HANDLE_DOMAIN_IRQ_IRQENTRY
irq: nds32: avoid CONFIG_HANDLE_DOMAIN_IRQ
irq: arc: avoid CONFIG_HANDLE_DOMAIN_IRQ
irq: add generic_handle_arch_irq()
irq: unexport handle_irq_desc()
irq: simplify handle_domain_{irq,nmi}()
irq: mips: simplify do_domain_IRQ()
...
|
||
|
Marc Zyngier
|
c6dca712f6 |
Merge branch irq/remove-handle-domain-irq-20211026 into irq/irqchip-next
* irq/remove-handle-domain-irq-20211026:
: Large rework of the architecture entry code from Mark Rutland.
: From the cover letter:
:
: <quote>
: The handle_domain_{irq,nmi}() functions were oringally intended as a
: convenience, but recent rework to entry code across the kernel tree has
: demonstrated that they cause more pain than they're worth and prevent
: architectures from being able to write robust entry code.
:
: This series reworks the irq code to remove them, handling the necessary
: entry work consistently in entry code (be it architectural or generic).
: </quote>
MIPS: irq: Avoid an unused-variable error
irq: remove handle_domain_{irq,nmi}()
irq: remove CONFIG_HANDLE_DOMAIN_IRQ_IRQENTRY
irq: riscv: perform irqentry in entry code
irq: openrisc: perform irqentry in entry code
irq: csky: perform irqentry in entry code
irq: arm64: perform irqentry in entry code
irq: arm: perform irqentry in entry code
irq: add a (temporary) CONFIG_HANDLE_DOMAIN_IRQ_IRQENTRY
irq: nds32: avoid CONFIG_HANDLE_DOMAIN_IRQ
irq: arc: avoid CONFIG_HANDLE_DOMAIN_IRQ
irq: add generic_handle_arch_irq()
irq: unexport handle_irq_desc()
irq: simplify handle_domain_{irq,nmi}()
irq: mips: simplify do_domain_IRQ()
irq: mips: stop (ab)using handle_domain_irq()
irq: mips: simplify bcm6345_l1_irq_handle()
irq: mips: avoid nested irq_enter()
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
||
|
Mark Rutland
|
bab4ff1edc |
irq: mips: stop (ab)using handle_domain_irq()
On MIPS, the only user of handle_domain_irq() is octeon_irq_ciu3_ip2(),
which is called from the platform-specific plat_irq_dispatch() function
invoked from the early assembly code.
No other irqchip relevant to arch/mips uses handle_domain_irq():
* No other plat_irq_dispatch() function transitively calls
handle_domain_irq().
* No other vectored IRQ dispatch function registered with
set_vi_handler() calls handle_domain_irq().
* No chained irqchip handlers call handle_domain_irq(), which makes
sense as this is meant to only be used by root irqchip handlers.
Currently octeon_irq_ciu3_ip2() passes NULL as the `regs` argument to
handle_domain_irq(), and as handle_domain_irq() will pass this to
set_irq_regs(), any invoked IRQ handlers will erroneously see a NULL
pt_regs if they call get_pt_regs().
Fix this by calling generic_handle_domain_irq() directly, and performing
the necessary irq_{enter,exit}() logic directly in
octeon_irq_ciu3_ip2(). At the same time, deselect HANDLE_DOMAIN_IRQ,
which subsequent patches will remove.
Other than the corrected behaviour of get_pt_regs(), there should be no
functional change as a result of this patch.
Fixes:
|
||
|
Thomas Bogendoerfer
|
95b8a5e011 |
MIPS: Remove NETLOGIC support
No (active) developer owns this hardware, so let's remove Linux support. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> |
||
|
Florian Fainelli
|
bf8bde41d2 |
MIPS: BMIPS: Remove use of irq_cpu_offline
irq_cpu_offline() is only used by MIPS and we should instead use irq_migrate_all_off_this_cpu(). This will be helpful in order to remove drivers/irqchip/irq-bcm7038-l1.c irq_cpu_offline callback which would have got in the way of making this driver modular. Suggested-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211020184859.2705451-2-f.fainelli@gmail.com |
||
|
Tiezhu Yang
|
307d149d94 |
bpf, mips: Clean up config options about JIT
The config options MIPS_CBPF_JIT and MIPS_EBPF_JIT are useless, remove them in arch/mips/Kconfig, and then modify arch/mips/net/Makefile. Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Link: https://lore.kernel.org/bpf/1633915150-13220-2-git-send-email-yangtiezhu@loongson.cn |
||
|
Arnd Bergmann
|
951cd3a086
|
firmware: include drivers/firmware/Kconfig unconditionally
Compile-testing drivers that require access to a firmware layer fails when that firmware symbol is unavailable. This happened twice this week: - My proposed to change to rework the QCOM_SCM firmware symbol broke on ppc64 and others. - The cs_dsp firmware patch added device specific firmware loader into drivers/firmware, which broke on the same set of architectures. We should probably do the same thing for other subsystems as well, but fix this one first as this is a dependency for other patches getting merged. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Acked-by: Will Deacon <will@kernel.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Mark Brown <broonie@kernel.org> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Charles Keepax <ckeepax@opensource.cirrus.com> Cc: Simon Trimmer <simont@opensource.cirrus.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Mark Brown <broonie@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Johan Almbladh
|
01bdc58e94 |
mips, bpf: Enable eBPF JITs
This patch enables the new eBPF JITs for 32-bit and 64-bit MIPS. It also disables the old cBPF JIT to so cBPF programs are converted to use the new JIT. Workarounds for R4000 CPU errata are not implemented by the JIT, so the JIT is disabled if any of those workarounds are configured. Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20211005165408.2305108-7-johan.almbladh@anyfinetworks.com |
||
|
Jackie Liu
|
7f3b3c2bfa |
MIPS: loongson64: make CPU_LOONGSON64 depends on MIPS_FP_SUPPORT
mach/loongson64 fails to build when the FPU support is disabled:
arch/mips/loongson64/cop2-ex.c:45:15: error: implicit declaration of function ‘__is_fpu_owner’; did you mean ‘is_fpu_owner’? [-Werror=implicit-function-declaration]
arch/mips/loongson64/cop2-ex.c:98:30: error: ‘struct thread_struct’ has no member named ‘fpu’
arch/mips/loongson64/cop2-ex.c:99:30: error: ‘struct thread_struct’ has no member named ‘fpu’
arch/mips/loongson64/cop2-ex.c:131:43: error: ‘struct thread_struct’ has no member named ‘fpu’
arch/mips/loongson64/cop2-ex.c:137:38: error: ‘struct thread_struct’ has no member named ‘fpu’
arch/mips/loongson64/cop2-ex.c:203:30: error: ‘struct thread_struct’ has no member named ‘fpu’
arch/mips/loongson64/cop2-ex.c:219:30: error: ‘struct thread_struct’ has no member named ‘fpu’
arch/mips/loongson64/cop2-ex.c:283:38: error: ‘struct thread_struct’ has no member named ‘fpu’
arch/mips/loongson64/cop2-ex.c:301:38: error: ‘struct thread_struct’ has no member named ‘fpu’
Fixes:
|
||
|
Linus Torvalds
|
58ca241587 |
Tracing updates for 5.15:
- Simplifying the Kconfig use of FTRACE and TRACE_IRQFLAGS_SUPPORT
- bootconfig now can start histograms
- bootconfig supports group/all enabling
- histograms now can put values in linear size buckets
- execnames can be passed to synthetic events
- Introduction of "event probes" that attach to other events and
can retrieve data from pointers of fields, or record fields
as different types (a pointer to a string as a string instead
of just a hex number)
- Various fixes and clean ups
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYTJDixQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qnPLAP9XviWrZD27uFj6LU/Vp2umbq8la1aC
oW8o9itUGpLoHQD+OtsMpQXsWrxoNw/JD1OWCH4J0YN+TnZAUUG2E9e0twA=
=OZXG
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
- simplify the Kconfig use of FTRACE and TRACE_IRQFLAGS_SUPPORT
- bootconfig can now start histograms
- bootconfig supports group/all enabling
- histograms now can put values in linear size buckets
- execnames can be passed to synthetic events
- introduce "event probes" that attach to other events and can retrieve
data from pointers of fields, or record fields as different types (a
pointer to a string as a string instead of just a hex number)
- various fixes and clean ups
* tag 'trace-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (35 commits)
tracing/doc: Fix table format in histogram code
selftests/ftrace: Add selftest for testing duplicate eprobes and kprobes
selftests/ftrace: Add selftest for testing eprobe events on synthetic events
selftests/ftrace: Add test case to test adding and removing of event probe
selftests/ftrace: Fix requirement check of README file
selftests/ftrace: Add clear_dynamic_events() to test cases
tracing: Add a probe that attaches to trace events
tracing/probes: Reject events which have the same name of existing one
tracing/probes: Have process_fetch_insn() take a void * instead of pt_regs
tracing/probe: Change traceprobe_set_print_fmt() to take a type
tracing/probes: Use struct_size() instead of defining custom macros
tracing/probes: Allow for dot delimiter as well as slash for system names
tracing/probe: Have traceprobe_parse_probe_arg() take a const arg
tracing: Have dynamic events have a ref counter
tracing: Add DYNAMIC flag for dynamic events
tracing: Replace deprecated CPU-hotplug functions.
MAINTAINERS: Add an entry for os noise/latency
tracepoint: Fix kerneldoc comments
bootconfig/tracing/ktest: Update ktest example for boot-time tracing
tools/bootconfig: Use per-group/all enable option in ftrace2bconf script
...
|
||
|
Linus Torvalds
|
d6742212c0 |
- converted Pistachio platform to use MIPS generic kernel
- fixes and cleanups -----BEGIN PGP SIGNATURE----- iQJOBAABCAA4FiEEbt46xwy6kEcDOXoUeZbBVTGwZHAFAmEx9dUaHHRzYm9nZW5k QGFscGhhLmZyYW5rZW4uZGUACgkQeZbBVTGwZHA0xQ/8D1gvh1fURnwLrDjNyydC yOVngOviRgI/3vZj3i1dSLEXskCVjXYhFJLtMUuwiTH5J3b5ToxjjKfp3MZv55BV 04B11YuXXqDQ6fzXCmaPNK6jfgq4DmZZSGx3hx2H7HLq749WrxiReTK4bmwizH3V 2A2I7DDTUhGG4L3ThDMiQO17aRfR7C+5eltRvyCJeGTnvyB67x6eOkOSBcreJSVj iCshM7XkCXEsLjdvv0XOiOWZJLTjMoEyQm+uQya7wkS6/0PZ4MQqou+WvppDH0Sc w/36lSaMYSuP2KqcXLehfhdPCQpWxfvcOn4j0Z5yBZ3ADzBN44s6S3MEgncvona3 w4ki0ZCHzpPa81Z15Fn9EIHAQ7H9XIpnTTByZjbBI+6Ch7MSfQv0yUqKPc2Hyl6a DksVSKyrC78iNOhtjFVOpjW8rJ47GWI25nbFyADeZWoyjX35FWiDQJWn5K5Aa6+D RBTHGbMcaAiuTauUpDKvxaWmT+NyB0WUjxpMdqg2BLQcv3CvcrTR39zVrBBvG0mM BoMjCR60q8MSG/NBlZt03FEhJXsu2UZFFMfilIkJmNjoB7VANLexPsU+jI6LjT36 qiVZKXHtR/NpbBdOSk+DXFh0QyAStJ1mfZ6yQ0xYyBvhn6bISIK7nn6LhFtVmN85 kUTOZuQhQ6qigRu++i1sb3U= =mKyO -----END PGP SIGNATURE----- Merge tag 'mips_5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS updates from Thomas Bogendoerfer: - converted Pistachio platform to use MIPS generic kernel - fixes and cleanups * tag 'mips_5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (29 commits) MIPS: Malta: fix alignment of the devicetree buffer MIPS: ingenic: Unconditionally enable clock of CPU #0 MIPS: mscc: ocelot: mark the phy-mode for internal PHY ports MIPS: mscc: ocelot: disable all switch ports by default MAINTAINERS: adjust PISTACHIO SOC SUPPORT after its retirement MIPS: Return true/false (not 1/0) from bool functions MIPS: generic: Return true/false (not 1/0) from bool functions MIPS: Make a alias for pistachio_defconfig MIPS: Retire MACH_PISTACHIO MIPS: config: generic: Add config for Marduk board pinctrl: pistachio: Make it as an option phy: pistachio-usb: Depend on MIPS || COMPILE_TEST clocksource/drivers/pistachio: Make it selectable for MIPS clk: pistachio: Make it selectable for generic MIPS kernel MIPS: DTS: Pistachio add missing cpc and cdmm MIPS: generic: Allow generating FIT image for Marduk board MIPS: locking/atomic: Fix atomic{_64,}_sub_if_positive MIPS: loongson2ef: don't build serial.o unconditionally MIPS: Replace deprecated CPU-hotplug functions. MIPS: Alchemy: Fix spelling contraction "cant" -> "can't" ... |
||
|
Linus Torvalds
|
4cdc4cc2ad |
asm-generic changes for 5.15
The main content for 5.15 is a series that cleans up the handling of
strncpy_from_user() and strnlen_user(), removing a lot of slightly
incorrect versions of these in favor of the lib/strn*.c helpers
that implement these correctly and more efficiently.
The only architectures that retain a private version now are
mips, ia64, um and parisc. I had offered to convert those at all,
but Thomas Bogendoerfer wanted to keep the mips version for the
moment until he had a chance to do regression testing.
The branch also contains two patches for bitops and for ffs().
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=NB0a
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"The main content for 5.15 is a series that cleans up the handling of
strncpy_from_user() and strnlen_user(), removing a lot of slightly
incorrect versions of these in favor of the lib/strn*.c helpers that
implement these correctly and more efficiently.
The only architectures that retain a private version now are mips,
ia64, um and parisc. I had offered to convert those at all, but Thomas
Bogendoerfer wanted to keep the mips version for the moment until he
had a chance to do regression testing.
The branch also contains two patches for bitops and for ffs()"
* tag 'asm-generic-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
bitops/non-atomic: make @nr unsigned to avoid any DIV
asm-generic: ffs: Drop bogus reference to ffz location
asm-generic: reverse GENERIC_{STRNCPY_FROM,STRNLEN}_USER symbols
asm-generic: remove extra strn{cpy_from,len}_user declarations
asm-generic: uaccess: remove inline strncpy_from_user/strnlen_user
s390: use generic strncpy/strnlen from_user
microblaze: use generic strncpy/strnlen from_user
csky: use generic strncpy/strnlen from_user
arc: use generic strncpy/strnlen from_user
hexagon: use generic strncpy/strnlen from_user
h8300: remove stale strncpy_from_user
asm-generic/uaccess.h: remove __strncpy_from_user/__strnlen_user
|
||
|
Masahiro Yamada
|
4aae683f13 |
tracing: Refactor TRACE_IRQFLAGS_SUPPORT in Kconfig
Make architectures select TRACE_IRQFLAGS_SUPPORT instead of having many defines. Link: https://lkml.kernel.org/r/20210731052233.4703-2-masahiroy@kernel.org Acked-by: Heiko Carstens <hca@linux.ibm.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> #arch/arc Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> |
||
|
Jiaxun Yang
|
104f942b28 |
MIPS: Retire MACH_PISTACHIO
Now it can be replaced by generic kernel. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> |
||
|
Lukas Bulwahn
|
094121ef81 |
arch: Kconfig: clean up obsolete use of HAVE_IDE
The arch-specific Kconfig files use HAVE_IDE to indicate if IDE is supported. As IDE support and the HAVE_IDE config vanishes with commit |
||
|
Arnd Bergmann
|
e6226997ec |
asm-generic: reverse GENERIC_{STRNCPY_FROM,STRNLEN}_USER symbols
Most architectures do not need a custom implementation, and in most
cases the generic implementation is preferred, so change the polariy
on these Kconfig symbols to require architectures to select them when
they provide their own version.
The new name is CONFIG_ARCH_HAS_{STRNCPY_FROM,STRNLEN}_USER.
The remaining architectures at the moment are: ia64, mips, parisc,
um and xtensa. We should probably convert these as well, but
I was not sure how far to take this series. Thomas Bogendoerfer
had some concerns about converting mips but may still do some
more detailed measurements to see which version is better.
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: linux-ia64@vger.kernel.org
Cc: linux-mips@vger.kernel.org
Cc: linux-parisc@vger.kernel.org
Cc: linux-s390@vger.kernel.org
Cc: linux-um@lists.infradead.org
Cc: linux-xtensa@linux-xtensa.org
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Helge Deller <deller@gmx.de> # parisc
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
||
|
Linus Torvalds
|
71bd934101 |
Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton: "190 patches. Subsystems affected by this patch series: mm (hugetlb, userfaultfd, vmscan, kconfig, proc, z3fold, zbud, ras, mempolicy, memblock, migration, thp, nommu, kconfig, madvise, memory-hotplug, zswap, zsmalloc, zram, cleanups, kfence, and hmm), procfs, sysctl, misc, core-kernel, lib, lz4, checkpatch, init, kprobes, nilfs2, hfs, signals, exec, kcov, selftests, compress/decompress, and ipc" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (190 commits) ipc/util.c: use binary search for max_idx ipc/sem.c: use READ_ONCE()/WRITE_ONCE() for use_global_lock ipc: use kmalloc for msg_queue and shmid_kernel ipc sem: use kvmalloc for sem_undo allocation lib/decompressors: remove set but not used variabled 'level' selftests/vm/pkeys: exercise x86 XSAVE init state selftests/vm/pkeys: refill shadow register after implicit kernel write selftests/vm/pkeys: handle negative sys_pkey_alloc() return code selftests/vm/pkeys: fix alloc_random_pkey() to make it really, really random kcov: add __no_sanitize_coverage to fix noinstr for all architectures exec: remove checks in __register_bimfmt() x86: signal: don't do sas_ss_reset() until we are certain that sigframe won't be abandoned hfsplus: report create_date to kstat.btime hfsplus: remove unnecessary oom message nilfs2: remove redundant continue statement in a while-loop kprobes: remove duplicated strong free_insn_page in x86 and s390 init: print out unknown kernel parameters checkpatch: do not complain about positive return values starting with EPOLL checkpatch: improve the indented label test checkpatch: scripts/spdxcheck.py now requires python3 ... |
||
|
Linus Torvalds
|
19b4385922 |
- added support for OpeneEmbed SOM9331 board
- Ingenic fixes/improvments - other fixes and cleanups -----BEGIN PGP SIGNATURE----- iQJOBAABCAA4FiEEbt46xwy6kEcDOXoUeZbBVTGwZHAFAmDdyJQaHHRzYm9nZW5k QGFscGhhLmZyYW5rZW4uZGUACgkQeZbBVTGwZHBlyRAAhj5dC1EyGsc0cWyzC8ZU Nh45vzMCSxa4mxAelNjuVKdE0h7gLeRa8/sKPV+EcS3ZFcSfZQeIHEbH9Na3EDS7 KtUZmkjrHCDdRTh7kou7E7mb716HvoQEyq6d1VyZOahyqf2ZcjIsFinK+As+4wBV JcXJMcpUWemI4Ojm8cbmNWQW3V2Ty9qLNUa6BpmntbdOdYowTih9QWHv2u1YsOR7 R6LJXdyo6V1RieeqfZaWXTQtN8yyXYhBewLIy0DxBAm329f5sRHUVd9/ZD2RMByD 1weEhbs0jhmYZFSfkwZ8SjAb4GkusjNTnDiK4Rsuz6pQK0BIGNAV0Mrnedq+i5eD wrrTI1/envStDpj9XGlSNajcaQGpTza1V1uaCIm4EanOMMTBc8DTXaj7MCOlTD8j fkNE3ykfloVSSzZAWCmcpV9fBsFwQp3m+cWrtIAAnOJDK+NV5FfABUwFHKnBUpxG YOUNCed0WJFx++xrHKylt8hWILLEATLHh1h5vDsEYJi4gwt2KxCSYQBGgSYKa1At tOUa5UINTMvpe4U9GEjHh6f1VedtUNYUzXjD5g2cn62d81RCSx3hB1KkfQSKtaDw H9sR8d+rDFt4fK9T/HPZ3EyM2i9FkZNv+CulfGNd3M0vnF8+qX2xRehWrqhwBBi0 2p7V9/t5TPhziAfJySKX+Jg= =j2kH -----END PGP SIGNATURE----- Merge tag 'mips_5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS updates from Thomas Bogendoerfer: - add support for OpeneEmbed SOM9331 board - Ingenic fixes/improvments - other fixes and cleanups * tag 'mips_5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (39 commits) MIPS: Fix PKMAP with 32-bit MIPS huge page support MIPS: CI20: Add second percpu timer for SMP. MIPS: CI20: Reduce clocksource to 750 kHz. MIPS: Ingenic: Add MAC syscon nodes for Ingenic SoCs. dt-bindings: clock: Add documentation for MAC PHY control bindings. MIPS: X1830: Respect cell count of common properties. MIPS: set mips32r5 for virt extensions MIPS: loongsoon64: Reserve memory below starting pfn to prevent Oops MIPS: MT extensions are not available on MIPS32r1 mips/kvm: Use BUG_ON instead of if condition followed by BUG MIPS: OCTEON: octeon-usb: Use devm_platform_get_and_ioremap_resource() MIPS: add PMD table accounting into MIPS'pmd_alloc_one MIPS: Loongson64: fix spelling of SPDX tag MIPS: ingenic: rs90: Add dedicated VRAM memory region MIPS: ingenic: gcw0: Set codec to cap-less mode for FM radio MIPS: ingenic: jz4780: Fix I2C nodes to match DT doc MIPS: ingenic: Select CPU_SUPPORTS_CPUFREQ && MIPS_EXTERNAL_TIMER MIPS: Kconfig: ingenic: Ensure MACH_INGENIC_GENERIC selects all SoCs MIPS: cpu-probe: Fix FPU detection on Ingenic JZ4760(B) MIPS: boot: Support specifying UART port on Ingenic SoCs ... |
||
|
Linus Torvalds
|
514798d365 |
This round has a diffstat dominated by Qualcomm clk drivers. Honestly though
that's just a bunch of data so the diffstat reflects that. Looking beyond that
there's just a bunch of updates all around in various clk drivers. Renesas and
NXP (for i.MX) are two SoC vendors that have a lot of patches in here. Overall
the driver changes look to be mostly enabling more clks and non-critical fixes
that we could hold until the next merge window.
I'm especially excited about the series from Arnd that graduates clkdev to be
the only implementation of clk_get() and clk_put(). That's a good step in the
right direction to migreate eveerything over to the common clk framework. Now
we don't have to worry about clkdev specific details, they're just part of the
clk API now.
Core:
- clkdev is now the only option, i.e. clk_get()/clk_put() is implemented in
only one place in the kernel instead of in drivers/clk/clkdev.c and in
architectures that want their own implementation
New Drivers:
- Texas Instruments' LMK04832 Ultra Low-Noise JESD204B Compliant Clock
Jitter Cleaner With Dual Loop PLLs
- Qualcomm MDM9607 GCC
- Qualcomm SC8180X display clks
- Qualcomm SM6125 GCC
- Qualcomm SM8250 CAMCC (camera)
- Renesas RZ/G2L SoC
- Hisilicon hi3559A SoC
Updates:
- Stop using clock-output-names in ST clk drivers (yay!)
- Support secure mode of STM32MP1 SoCs
- Improve clock support for Actions S500 SoC
- duty cycle setting support on qcom clks
- Add TI am33xx spread spectrum clock support
- Use determine_rate() for the Amlogic pll ops instead of round_rate()
- Restrict Amlogic gp0/1 and audio plls range on g12a/sm1
- Improve Amlogic axg-audio controller error on deferral
- Add NNA clocks on Amlogic g12a
- Reduce memory footprint of Rockchip PLL rate tables
- A fix for the newly added Rockchip rk3568 clk driver
- Exported clock for the newly added Rockchip video decoder
- Remove audio ipg clock from i.MX8MP
- Remove deprecated legacy clock binding for i.MX SCU clock driver
- Use common clk-imx8qxp for both i.MX8QXP and i.MX8QM
- Add multiple clocks to clk-imx8qxp driver (enet, hdmi, lcdif, audio,
parallel interface)
- Add dedicated clock ops for i.MX paralel interface
- Different fixes for clocks controlled by ATF on i.MX SoCs
- Add A53/A72 frequency scaling support i.MX clk-scu driver
- Add special case for DCSS clock on suspend for i.MX clk-scu driver
- Add parent save/restore on suspend/resume to i.MX clk-scu driver
- Skip runtime PM enablement for CPU clocks in i.MX clk-scu driver
- Remove the sys1_pll/sys2_pll clock gates for i.MX8MQ and their
bindings
- Tegra clk driver no longer deasserts resets on clk_enable as it
gets in the way of certain power-up sequences
- Fix compile testing for Tegra clk driver
- One patch to fix a divider on the Allwinner v3s Audio PLL
- Add support for CPU core clock boost modes on Renesas R-Car Gen3
- Add ISPCS (Image Signal Processor) clocks on Renesas R-Car V3U
- Switch SH/R-Mobile and R-Car "DIV6" clocks to .determine_rate()
and improve support for multiple parents
- Switch Renesas RZ/N1 divider clocks to .determine_rate()
- Add ZA2 (Audio Clock Generator) clock on Renesas R-Car D3
- Convert ar7 to common clk framework
- Convert ralink to common clk framework
-----BEGIN PGP SIGNATURE-----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=YnCF
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"This round has a diffstat dominated by Qualcomm clk drivers. Honestly
though that's just a bunch of data so the diffstat reflects that.
Looking beyond that there's just a bunch of updates all around in
various clk drivers. Renesas and NXP (for i.MX) are two SoC vendors
that have a lot of patches in here.
Overall the driver changes look to be mostly enabling more clks and
non-critical fixes that we could hold until the next merge window.
I'm especially excited about the series from Arnd that graduates
clkdev to be the only implementation of clk_get() and clk_put().
That's a good step in the right direction to migreate eveerything over
to the common clk framework. Now we don't have to worry about clkdev
specific details, they're just part of the clk API now.
Core:
- clkdev is now the only option, i.e. clk_get()/clk_put() is
implemented in only one place in the kernel instead of in
drivers/clk/clkdev.c and in architectures that want their own
implementation
New Drivers:
- Texas Instruments' LMK04832 Ultra Low-Noise JESD204B Compliant
Clock Jitter Cleaner With Dual Loop PLLs
- Qualcomm MDM9607 GCC
- Qualcomm SC8180X display clks
- Qualcomm SM6125 GCC
- Qualcomm SM8250 CAMCC (camera)
- Renesas RZ/G2L SoC
- Hisilicon hi3559A SoC
Updates:
- Stop using clock-output-names in ST clk drivers (yay!)
- Support secure mode of STM32MP1 SoCs
- Improve clock support for Actions S500 SoC
- duty cycle setting support on qcom clks
- Add TI am33xx spread spectrum clock support
- Use determine_rate() for the Amlogic pll ops instead of
round_rate()
- Restrict Amlogic gp0/1 and audio plls range on g12a/sm1
- Improve Amlogic axg-audio controller error on deferral
- Add NNA clocks on Amlogic g12a
- Reduce memory footprint of Rockchip PLL rate tables
- A fix for the newly added Rockchip rk3568 clk driver
- Exported clock for the newly added Rockchip video decoder
- Remove audio ipg clock from i.MX8MP
- Remove deprecated legacy clock binding for i.MX SCU clock driver
- Use common clk-imx8qxp for both i.MX8QXP and i.MX8QM
- Add multiple clocks to clk-imx8qxp driver (enet, hdmi, lcdif,
audio, parallel interface)
- Add dedicated clock ops for i.MX paralel interface
- Different fixes for clocks controlled by ATF on i.MX SoCs
- Add A53/A72 frequency scaling support i.MX clk-scu driver
- Add special case for DCSS clock on suspend for i.MX clk-scu driver
- Add parent save/restore on suspend/resume to i.MX clk-scu driver
- Skip runtime PM enablement for CPU clocks in i.MX clk-scu driver
- Remove the sys1_pll/sys2_pll clock gates for i.MX8MQ and their
bindings
- Tegra clk driver no longer deasserts resets on clk_enable as it
gets in the way of certain power-up sequences
- Fix compile testing for Tegra clk driver
- One patch to fix a divider on the Allwinner v3s Audio PLL
- Add support for CPU core clock boost modes on Renesas R-Car Gen3
- Add ISPCS (Image Signal Processor) clocks on Renesas R-Car V3U
- Switch SH/R-Mobile and R-Car "DIV6" clocks to .determine_rate() and
improve support for multiple parents
- Switch Renesas RZ/N1 divider clocks to .determine_rate()
- Add ZA2 (Audio Clock Generator) clock on Renesas R-Car D3
- Convert ar7 to common clk framework
- Convert ralink to common clk framework"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (161 commits)
clk: zynqmp: Handle divider specific read only flag
clk: zynqmp: Use firmware specific mux clock flags
clk: zynqmp: Use firmware specific divider clock flags
clk: zynqmp: Use firmware specific common clock flags
clk: lmk04832: Use of match table
clk: lmk04832: Depend on SPI
clk: stm32mp1: new compatible for secure RCC support
dt-bindings: clock: stm32mp1 new compatible for secure rcc
dt-bindings: reset: add MCU HOLD BOOT ID for SCMI reset domains on stm32mp15
dt-bindings: reset: add IDs for SCMI reset domains on stm32mp15
dt-bindings: clock: add IDs for SCMI clocks on stm32mp15
reset: stm32mp1: remove stm32mp1 reset
clk: hisilicon: Add clock driver for hi3559A SoC
dt-bindings: Document the hi3559a clock bindings
clk: si5341: Add sysfs properties to allow checking/resetting device faults
clk: si5341: Add silabs,iovdd-33 property
clk: si5341: Add silabs,xaxb-ext-clk property
clk: si5341: Allow different output VDD_SEL values
clk: si5341: Update initialization magic
clk: si5341: Check for input clock presence and PLL lock on startup
...
|
||
|
Kefeng Wang
|
63703f37aa |
mm: generalize ZONE_[DMA|DMA32]
ZONE_[DMA|DMA32] configs have duplicate definitions on platforms that subscribe to them. Instead, just make them generic options which can be selected on applicable platforms. Also only x86/arm64 architectures could enable both ZONE_DMA and ZONE_DMA32 if EXPERT, add ARCH_HAS_ZONE_DMA_SET to make dma zone configurable and visible on the two architectures. Link: https://lkml.kernel.org/r/20210528074557.17768-1-wangkefeng.wang@huawei.com Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64] Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Palmer Dabbelt <palmerdabbelt@google.com> [RISC-V] Acked-by: Michal Simek <michal.simek@xilinx.com> [microblaze] Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Richard Henderson <rth@twiddle.net> Cc: Russell King <linux@armlinux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Kefeng Wang
|
781eb2cdd2 |
mm/kconfig: move HOLES_IN_ZONE into mm
commit a55749639dc1 ("ia64: drop marked broken DISCONTIGMEM and
VIRTUAL_MEM_MAP") drop VIRTUAL_MEM_MAP, so there is no need HOLES_IN_ZONE
on ia64.
Also move HOLES_IN_ZONE into mm/Kconfig, select it if architecture needs
this feature.
Link: https://lkml.kernel.org/r/20210417075946.181402-1-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64]
Cc: Will Deacon <will@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Mike Rapoport
|
a9ee6cf5c6 |
mm: replace CONFIG_NEED_MULTIPLE_NODES with CONFIG_NUMA
After removal of DISCINTIGMEM the NEED_MULTIPLE_NODES and NUMA configuration options are equivalent. Drop CONFIG_NEED_MULTIPLE_NODES and use CONFIG_NUMA instead. Done with $ sed -i 's/CONFIG_NEED_MULTIPLE_NODES/CONFIG_NUMA/' \ $(git grep -wl CONFIG_NEED_MULTIPLE_NODES) $ sed -i 's/NEED_MULTIPLE_NODES/NUMA/' \ $(git grep -wl NEED_MULTIPLE_NODES) with manual tweaks afterwards. [rppt@linux.ibm.com: fix arm boot crash] Link: https://lkml.kernel.org/r/YMj9vHhHOiCVN4BF@linux.ibm.com Link: https://lkml.kernel.org/r/20210608091316.3622-9-rppt@kernel.org Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: David Hildenbrand <david@redhat.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matt Turner <mattst88@gmail.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Arnd Bergmann
|
2f4574dd6d |
clkdev: remove CONFIG_CLKDEV_LOOKUP
This option is now synonymous with CONFIG_HAVE_CLK, so use the latter globally. Any out-of-tree platform ports that still use a private clk_get()/clk_put() implementation should move to CONFIG_COMMON_CLK. Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
35f752be4f |
mips: ralink: convert to CONFIG_COMMON_CLK
ralink only has a very trivial clock implementation, with everything
being fixed clocks.
Convert it to CONFIG_COMMON_CLK to reduce the number of platforms
that rely on legacy clocks. Of course, the clocks really should
be read from the device tree instead, but this is a step into that
direction.
This adds about 50KB to the kernel image size, which is an unfortunate
increase, but not as bad as I had feared:
text data bss dec hex filename
3778560 1582216 92256 5453032 5334e8 vmlinux-vocore-before
3822148 1601192 92304 5515644 54297c vmlinux-vocore-after
3870226 1644468 200192
|
||
|
Arnd Bergmann
|
b408b611eb |
mips: ar7: convert to CONFIG_COMMON_CLK
Perform a minimal conversion of the ar7 clock implementation to the common clock framework. While the hardware can control the rates, this is left unchanged, and all clocks are registered as fixed-rate or fixed-divider clocks. Similarly, the clkdev lookup information is left unchanged but moved from the table format into individual allocations. There is a small increase in code size: text data bss dec hex filename 4757116 596640 91328 5445084 5315dc vmlinux-before 4806159 602360 91344 5499863 53ebd7 vmlinux-after Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
4410c4236e |
mips: ar7: convert to clkdev_lookup
ar7 is one of only two platforms that provide the clock interface but implement a custom version of the clkdev_lookup code. Change this to use the generic version instead. Signed-off-by: Arnd Bergmann <arnd@arndb.de> |