mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
synced 2025-08-28 09:22:08 +00:00
loongarch-next
111 Commits
Author | SHA1 | Message | Date | |
---|---|---|---|---|
![]() |
8be4d31cb8 |
Networking changes for 6.17.
Core & protocols ---------------- - Wrap datapath globals into net_aligned_data, to avoid false sharing. - Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container). - Add SO_INQ and SCM_INQ support to AF_UNIX. - Add SIOCINQ support to AF_VSOCK. - Add TCP_MAXSEG sockopt to MPTCP. - Add IPv6 force_forwarding sysctl to enable forwarding per interface. - Make TCP validation of whether packet fully fits in the receive window and the rcv_buf more strict. With increased use of HW aggregation a single "packet" can be multiple 100s of kB. - Add MSG_MORE flag to optimize large TCP transmissions via sockmap, improves latency up to 33% for sockmap users. - Convert TCP send queue handling from tasklet to BH workque. - Improve BPF iteration over TCP sockets to see each socket exactly once. - Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code. - Support enabling kernel threads for NAPI processing on per-NAPI instance basis rather than a whole device. Fully stop the kernel NAPI thread when threaded NAPI gets disabled. Previously thread would stick around until ifdown due to tricky synchronization. - Allow multicast routing to take effect on locally-generated packets. - Add output interface argument for End.X in segment routing. - MCTP: add support for gateway routing, improve bind() handling. - Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink. - Add a new neighbor flag ("extern_valid"), which cedes refresh responsibilities to userspace. This is needed for EVPN multi-homing where a neighbor entry for a multi-homed host needs to be synced across all the VTEPs among which the host is multi-homed. - Support NUD_PERMANENT for proxy neighbor entries. - Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM. - Add sequence numbers to netconsole messages. Unregister netconsole's console when all net targets are removed. Code refactoring. Add a number of selftests. - Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol should be used for an inbound SA lookup. - Support inspecting ref_tracker state via DebugFS. - Don't force bonding advertisement frames tx to ~333 ms boundaries. Add broadcast_neighbor option to send ARP/ND on all bonded links. - Allow providing upcall pid for the 'execute' command in openvswitch. - Remove DCCP support from Netfilter's conntrack. - Disallow multiple packet duplications in the queuing layer. - Prevent use of deprecated iptables code on PREEMPT_RT. Driver API ---------- - Support RSS and hashing configuration over ethtool Netlink. - Add dedicated ethtool callbacks for getting and setting hashing fields. - Add support for power budget evaluation strategy in PSE / Power-over-Ethernet. Generate Netlink events for overcurrent etc. - Support DPLL phase offset monitoring across all device inputs. Support providing clock reference and SYNC over separate DPLL inputs. - Support traffic classes in devlink rate API for bandwidth management. - Remove rtnl_lock dependency from UDP tunnel port configuration. Device drivers -------------- - Add a new Broadcom driver for 800G Ethernet (bnge). - Add a standalone driver for Microchip ZL3073x DPLL. - Remove IBM's NETIUCV device driver. - Ethernet high-speed NICs: - Broadcom (bnxt): - support zero-copy Tx of DMABUF memory - take page size into account for page pool recycling rings - Intel (100G, ice, idpf): - idpf: XDP and AF_XDP support preparations - idpf: add flow steering - add link_down_events statistic - clean up the TSPLL code - preparations for live VM migration - nVidia/Mellanox: - support zero-copy Rx/Tx interfaces (DMABUF and io_uring) - optimize context memory usage for matchers - expose serial numbers in devlink info - support PCIe congestion metrics - Meta (fbnic): - add 25G, 50G, and 100G link modes to phylink - support dumping FW logs - Marvell/Cavium: - support for CN20K generation of the Octeon chips - Amazon: - add HW clock (without timestamping, just hypervisor time access) - Ethernet virtual: - VirtIO net: - support segmentation of UDP-tunnel-encapsulated packets - Google (gve): - support packet timestamping and clock synchronization - Microsoft vNIC: - add handler for device-originated servicing events - allow dynamic MSI-X vector allocation - support Tx bandwidth clamping - Ethernet NICs consumer, and embedded: - AMD: - amd-xgbe: hardware timestamping and PTP clock support - Broadcom integrated MACs (bcmgenet, bcmasp): - use napi_complete_done() return value to support NAPI polling - add support for re-starting auto-negotiation - Broadcom switches (b53): - support BCM5325 switches - add bcm63xx EPHY power control - Synopsys (stmmac): - lots of code refactoring and cleanups - TI: - icssg-prueth: read firmware-names from device tree - icssg: PRP offload support - Microchip: - lan78xx: convert to PHYLINK for improved PHY and MAC management - ksz: add KSZ8463 switch support - Intel: - support similar queue priority scheme in multi-queue and time-sensitive networking (taprio) - support packet pre-emption in both - RealTek (r8169): - enable EEE at 5Gbps on RTL8126 - Airoha: - add PPPoE offload support - MDIO bus controller for Airoha AN7583 - Ethernet PHYs: - support for the IPQ5018 internal GE PHY - micrel KSZ9477 switch-integrated PHYs: - add MDI/MDI-X control support - add RX error counters - add cable test support - add Signal Quality Indicator (SQI) reporting - dp83tg720: improve reset handling and reduce link recovery time - support bcm54811 (and its MII-Lite interface type) - air_en8811h: support resume/suspend - support PHY counters for QCA807x and QCA808x - support WoL for QCA807x - CAN drivers: - rcar_canfd: support for Transceiver Delay Compensation - kvaser: report FW versions via devlink dev info - WiFi: - extended regulatory info support (6 GHz) - add statistics and beacon monitor for Multi-Link Operation (MLO) - support S1G aggregation, improve S1G support - add Radio Measurement action fields - support per-radio RTS threshold - some work around how FIPS affects wifi, which was wrong (RC4 is used by TKIP, not only WEP) - improvements for unsolicited probe response handling - WiFi drivers: - RealTek (rtw88): - IBSS mode for SDIO devices - RealTek (rtw89): - BT coexistence for MLO/WiFi7 - concurrent station + P2P support - support for USB devices RTL8851BU/RTL8852BU - Intel (iwlwifi): - use embedded PNVM in (to be released) FW images to fix compatibility issues - many cleanups (unused FW APIs, PCIe code, WoWLAN) - some FIPS interoperability - MediaTek (mt76): - firmware recovery improvements - more MLO work - Qualcomm/Atheros (ath12k): - fix scan on multi-radio devices - more EHT/Wi-Fi 7 features - encapsulation/decapsulation offload - Broadcom (brcm80211): - support SDIO 43751 device - Bluetooth: - hci_event: add support for handling LE BIG Sync Lost event - ISO: add socket option to report packet seqnum via CMSG - ISO: support SCM_TIMESTAMPING for ISO TS - Bluetooth drivers: - intel_pcie: support Function Level Reset - nxpuart: add support for 4M baudrate - nxpuart: implement powerup sequence, reset, FW dump, and FW loading Signed-off-by: Jakub Kicinski <kuba@kernel.org> -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmiFgLgACgkQMUZtbf5S IrvafxAAnQRwYBoIG+piCILx6z5pRvBGHkmEQ4AQgSCFuq2eO3ubwMFIqEybfma1 5+QFjUZAV3OgGgKRBS2KGWxtSzdiF+/JGV1VOIN67sX3Mm0a2QgjA4n5CgKL0FPr o6BEzjX5XwG1zvGcBNQ5BZ19xUUKjoZQgTtnea8sZ57Fsp5RtRgmYRqoewNvNk/n uImh0NFsDVb0UeOpSzC34VD9l1dJvLGdui4zJAjno/vpvmT1DkXjoK419J/r52SS X+5WgsfJ6DkjHqVN1tIhhK34yWqBOcwGFZJgEnWHMkFIl2FqRfFKMHyqtfLlVnLA mnIpSyz8Sq2AHtx0TlgZ3At/Ri8p5+yYJgHOXcDKyABa8y8Zf4wrycmr6cV9JLuL z54nLEVnJuvfDVDVJjsLYdJXyhMpZFq6+uAItdxKaw8Ugp/QqG4QtoRj+XIHz4ZW z6OohkCiCzTwEISFK+pSTxPS30eOxq43kCspcvuLiwCCStJBRkRb5GdZA4dm7LA+ 1Od4ADAkHjyrFtBqTyyC2scX8UJ33DlAIpAYyIeS6w9Cj9EXxtp1z33IAAAZ03MW jJwIaJuc8bK2fWKMmiG7ucIXjPo4t//KiWlpkwwqLhPbjZgfDAcxq1AC2TLoqHBL y4EOgKpHDCMAghSyiFIAn2JprGcEt8dp+11B0JRXIn4Pm/eYDH8= =lqbe -----END PGP SIGNATURE----- Merge tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core & protocols: - Wrap datapath globals into net_aligned_data, to avoid false sharing - Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container) - Add SO_INQ and SCM_INQ support to AF_UNIX - Add SIOCINQ support to AF_VSOCK - Add TCP_MAXSEG sockopt to MPTCP - Add IPv6 force_forwarding sysctl to enable forwarding per interface - Make TCP validation of whether packet fully fits in the receive window and the rcv_buf more strict. With increased use of HW aggregation a single "packet" can be multiple 100s of kB - Add MSG_MORE flag to optimize large TCP transmissions via sockmap, improves latency up to 33% for sockmap users - Convert TCP send queue handling from tasklet to BH workque - Improve BPF iteration over TCP sockets to see each socket exactly once - Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code - Support enabling kernel threads for NAPI processing on per-NAPI instance basis rather than a whole device. Fully stop the kernel NAPI thread when threaded NAPI gets disabled. Previously thread would stick around until ifdown due to tricky synchronization - Allow multicast routing to take effect on locally-generated packets - Add output interface argument for End.X in segment routing - MCTP: add support for gateway routing, improve bind() handling - Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink - Add a new neighbor flag ("extern_valid"), which cedes refresh responsibilities to userspace. This is needed for EVPN multi-homing where a neighbor entry for a multi-homed host needs to be synced across all the VTEPs among which the host is multi-homed - Support NUD_PERMANENT for proxy neighbor entries - Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM - Add sequence numbers to netconsole messages. Unregister netconsole's console when all net targets are removed. Code refactoring. Add a number of selftests - Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol should be used for an inbound SA lookup - Support inspecting ref_tracker state via DebugFS - Don't force bonding advertisement frames tx to ~333 ms boundaries. Add broadcast_neighbor option to send ARP/ND on all bonded links - Allow providing upcall pid for the 'execute' command in openvswitch - Remove DCCP support from Netfilter's conntrack - Disallow multiple packet duplications in the queuing layer - Prevent use of deprecated iptables code on PREEMPT_RT Driver API: - Support RSS and hashing configuration over ethtool Netlink - Add dedicated ethtool callbacks for getting and setting hashing fields - Add support for power budget evaluation strategy in PSE / Power-over-Ethernet. Generate Netlink events for overcurrent etc - Support DPLL phase offset monitoring across all device inputs. Support providing clock reference and SYNC over separate DPLL inputs - Support traffic classes in devlink rate API for bandwidth management - Remove rtnl_lock dependency from UDP tunnel port configuration Device drivers: - Add a new Broadcom driver for 800G Ethernet (bnge) - Add a standalone driver for Microchip ZL3073x DPLL - Remove IBM's NETIUCV device driver - Ethernet high-speed NICs: - Broadcom (bnxt): - support zero-copy Tx of DMABUF memory - take page size into account for page pool recycling rings - Intel (100G, ice, idpf): - idpf: XDP and AF_XDP support preparations - idpf: add flow steering - add link_down_events statistic - clean up the TSPLL code - preparations for live VM migration - nVidia/Mellanox: - support zero-copy Rx/Tx interfaces (DMABUF and io_uring) - optimize context memory usage for matchers - expose serial numbers in devlink info - support PCIe congestion metrics - Meta (fbnic): - add 25G, 50G, and 100G link modes to phylink - support dumping FW logs - Marvell/Cavium: - support for CN20K generation of the Octeon chips - Amazon: - add HW clock (without timestamping, just hypervisor time access) - Ethernet virtual: - VirtIO net: - support segmentation of UDP-tunnel-encapsulated packets - Google (gve): - support packet timestamping and clock synchronization - Microsoft vNIC: - add handler for device-originated servicing events - allow dynamic MSI-X vector allocation - support Tx bandwidth clamping - Ethernet NICs consumer, and embedded: - AMD: - amd-xgbe: hardware timestamping and PTP clock support - Broadcom integrated MACs (bcmgenet, bcmasp): - use napi_complete_done() return value to support NAPI polling - add support for re-starting auto-negotiation - Broadcom switches (b53): - support BCM5325 switches - add bcm63xx EPHY power control - Synopsys (stmmac): - lots of code refactoring and cleanups - TI: - icssg-prueth: read firmware-names from device tree - icssg: PRP offload support - Microchip: - lan78xx: convert to PHYLINK for improved PHY and MAC management - ksz: add KSZ8463 switch support - Intel: - support similar queue priority scheme in multi-queue and time-sensitive networking (taprio) - support packet pre-emption in both - RealTek (r8169): - enable EEE at 5Gbps on RTL8126 - Airoha: - add PPPoE offload support - MDIO bus controller for Airoha AN7583 - Ethernet PHYs: - support for the IPQ5018 internal GE PHY - micrel KSZ9477 switch-integrated PHYs: - add MDI/MDI-X control support - add RX error counters - add cable test support - add Signal Quality Indicator (SQI) reporting - dp83tg720: improve reset handling and reduce link recovery time - support bcm54811 (and its MII-Lite interface type) - air_en8811h: support resume/suspend - support PHY counters for QCA807x and QCA808x - support WoL for QCA807x - CAN drivers: - rcar_canfd: support for Transceiver Delay Compensation - kvaser: report FW versions via devlink dev info - WiFi: - extended regulatory info support (6 GHz) - add statistics and beacon monitor for Multi-Link Operation (MLO) - support S1G aggregation, improve S1G support - add Radio Measurement action fields - support per-radio RTS threshold - some work around how FIPS affects wifi, which was wrong (RC4 is used by TKIP, not only WEP) - improvements for unsolicited probe response handling - WiFi drivers: - RealTek (rtw88): - IBSS mode for SDIO devices - RealTek (rtw89): - BT coexistence for MLO/WiFi7 - concurrent station + P2P support - support for USB devices RTL8851BU/RTL8852BU - Intel (iwlwifi): - use embedded PNVM in (to be released) FW images to fix compatibility issues - many cleanups (unused FW APIs, PCIe code, WoWLAN) - some FIPS interoperability - MediaTek (mt76): - firmware recovery improvements - more MLO work - Qualcomm/Atheros (ath12k): - fix scan on multi-radio devices - more EHT/Wi-Fi 7 features - encapsulation/decapsulation offload - Broadcom (brcm80211): - support SDIO 43751 device - Bluetooth: - hci_event: add support for handling LE BIG Sync Lost event - ISO: add socket option to report packet seqnum via CMSG - ISO: support SCM_TIMESTAMPING for ISO TS - Bluetooth drivers: - intel_pcie: support Function Level Reset - nxpuart: add support for 4M baudrate - nxpuart: implement powerup sequence, reset, FW dump, and FW loading" * tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits) dpll: zl3073x: Fix build failure selftests: bpf: fix legacy netfilter options ipv6: annotate data-races around rt->fib6_nsiblings ipv6: fix possible infinite loop in fib6_info_uses_dev() ipv6: prevent infinite loop in rt6_nlmsg_size() ipv6: add a retry logic in net6_rt_notify() vrf: Drop existing dst reference in vrf_ip6_input_dst net/sched: taprio: align entry index attr validation with mqprio net: fsl_pq_mdio: use dev_err_probe selftests: rtnetlink.sh: remove esp4_offload after test vsock: remove unnecessary null check in vsock_getname() igb: xsk: solve negative overflow of nb_pkts in zerocopy mode stmmac: xsk: fix negative overflow of budget in zerocopy mode dt-bindings: ieee802154: Convert at86rf230.txt yaml format net: dsa: microchip: Disable PTP function of KSZ8463 net: dsa: microchip: Setup fiber ports for KSZ8463 net: dsa: microchip: Write switch MAC address differently for KSZ8463 net: dsa: microchip: Use different registers for KSZ8463 net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver dt-bindings: net: dsa: microchip: Add KSZ8463 switch support ... |
||
![]() |
c4958c118c |
m68k: defconfig: Update defconfigs for v6.16-rc2
- Enable modular build of the SCTP network protocol (no longer auto-enabled since now commit |
||
![]() |
fd72f265bb |
netfilter: conntrack: remove DCCP protocol support
The DCCP socket family has now been removed from this tree, see:
|
||
![]() |
1b98f357da |
Networking changes for 6.16.
Core ---- - Implement the Device Memory TCP transmit path, allowing zero-copy data transmission on top of TCP from e.g. GPU memory to the wire. - Move all the IPv6 routing tables management outside the RTNL scope, under its own lock and RCU. The route control path is now 3x times faster. - Convert queue related netlink ops to instance lock, reducing again the scope of the RTNL lock. This improves the control plane scalability. - Refactor the software crc32c implementation, removing unneeded abstraction layers and improving significantly the related micro-benchmarks. - Optimize the GRO engine for UDP-tunneled traffic, for a 10% performance improvement in related stream tests. - Cover more per-CPU storage with local nested BH locking; this is a prep work to remove the current per-CPU lock in local_bh_disable() on PREMPT_RT. - Introduce and use nlmsg_payload helper, combining buffer bounds verification with accessing payload carried by netlink messages. Netfilter --------- - Rewrite the procfs conntrack table implementation, improving considerably the dump performance. A lot of user-space tools still use this interface. - Implement support for wildcard netdevice in netdev basechain and flowtables. - Integrate conntrack information into nft trace infrastructure. - Export set count and backend name to userspace, for better introspection. BPF --- - BPF qdisc support: BPF-qdisc can be implemented with BPF struct_ops programs and can be controlled in similar way to traditional qdiscs using the "tc qdisc" command. - Refactor the UDP socket iterator, addressing long standing issues WRT duplicate hits or missed sockets. Protocols --------- - Improve TCP receive buffer auto-tuning and increase the default upper bound for the receive buffer; overall this improves the single flow maximum thoughput on 200Gbs link by over 60%. - Add AFS GSSAPI security class to AF_RXRPC; it provides transport security for connections to the AFS fileserver and VL server. - Improve TCP multipath routing, so that the sources address always matches the nexthop device. - Introduce SO_PASSRIGHTS for AF_UNIX, to allow disabling SCM_RIGHTS, and thus preventing DoS caused by passing around problematic FDs. - Retire DCCP socket. DCCP only receives updates for bugs, and major distros disable it by default. Its removal allows for better organisation of TCP fields to reduce the number of cache lines hit in the fast path. - Extend TCP drop-reason support to cover PAWS checks. Driver API ---------- - Reorganize PTP ioctl flag support to require an explicit opt-in for the drivers, avoiding the problem of drivers not rejecting new unsupported flags. - Converted several device drivers to timestamping APIs. - Introduce per-PHY ethtool dump helpers, improving the support for dump operations targeting PHYs. Tests and tooling ----------------- - Add support for classic netlink in user space C codegen, so that ynl-c can now read, create and modify links, routes addresses and qdisc layer configuration. - Add ynl sub-types for binary attributes, allowing ynl-c to output known struct instead of raw binary data, clarifying the classic netlink output. - Extend MPTCP selftests to improve the code-coverage. - Add tests for XDP tail adjustment in AF_XDP. New hardware / drivers ---------------------- - OpenVPN virtual driver: offload OpenVPN data channels processing to the kernel-space, increasing the data transfer throughput WRT the user-space implementation. - Renesas glue driver for the gigabit ethernet RZ/V2H(P) SoC. - Broadcom asp-v3.0 ethernet driver. - AMD Renoir ethernet device. - ReakTek MT9888 2.5G ethernet PHY driver. - Aeonsemi 10G C45 PHYs driver. Drivers ------- - Ethernet high-speed NICs: - nVidia/Mellanox (mlx5): - refactor the stearing table handling to reduce significantly the amount of memory used - add support for complex matches in H/W flow steering - improve flow streeing error handling - convert to netdev instance locking - Intel (100G, ice, igb, ixgbe, idpf): - ice: add switchdev support for LLDP traffic over VF - ixgbe: add firmware manipulation and regions devlink support - igb: introduce support for frame transmission premption - igb: adds persistent NAPI configuration - idpf: introduce RDMA support - idpf: add initial PTP support - Meta (fbnic): - extend hardware stats coverage - add devlink dev flash support - Broadcom (bnxt): - add support for RX-side device memory TCP - Wangxun (txgbe): - implement support for udp tunnel offload - complete PTP and SRIOV support for AML 25G/10G devices - Ethernet NICs embedded and virtual: - Google (gve): - add device memory TCP TX support - Amazon (ena): - support persistent per-NAPI config - Airoha: - add H/W support for L2 traffic offload - add per flow stats for flow offloading - RealTek (rtl8211): add support for WoL magic packet - Synopsys (stmmac): - dwmac-socfpga 1000BaseX support - add Loongson-2K3000 support - introduce support for hardware-accelerated VLAN stripping - Broadcom (bcmgenet): - expose more H/W stats - Freescale (enetc, dpaa2-eth): - enetc: add MAC filter, VLAN filter RSS and loopback support - dpaa2-eth: convert to H/W timestamping APIs - vxlan: convert FDB table to rhashtable, for better scalabilty - veth: apply qdisc backpressure on full ring to reduce TX drops - Ethernet switches: - Microchip (kzZ88x3): add ETS scheduler support - Ethernet PHYs: - RealTek (rtl8211): - add support for WoL magic packet - add support for PHY LEDs - CAN: - Adds RZ/G3E CANFD support to the rcar_canfd driver. - Preparatory work for CAN-XL support. - Add self-tests framework with support for CAN physical interfaces. - WiFi: - mac80211: - scan improvements with multi-link operation (MLO) - Qualcomm (ath12k): - enable AHB support for IPQ5332 - add monitor interface support to QCN9274 - add multi-link operation support to WCN7850 - add 802.11d scan offload support to WCN7850 - monitor mode for WCN7850, better 6 GHz regulatory - Qualcomm (ath11k): - restore hibernation support - MediaTek (mt76): - WiFi-7 improvements - implement support for mt7990 - Intel (iwlwifi): - enhanced multi-link single-radio (EMLSR) support on 5 GHz links - rework device configuration - RealTek (rtw88): - improve throughput for RTL8814AU - RealTek (rtw89): - add multi-link operation support - STA/P2P concurrency improvements - support different SAR configs by antenna - Bluetooth: - introduce HCI Driver protocol - btintel_pcie: do not generate coredump for diagnostic events - btusb: add HCI Drv commands for configuring altsetting - btusb: add RTL8851BE device 0x0bda:0xb850 - btusb: add new VID/PID 13d3/3584 for MT7922 - btusb: add new VID/PID 13d3/3630 and 13d3/3613 for MT7925 - btnxpuart: implement host-wakeup feature Signed-off-by: Paolo Abeni <pabeni@redhat.com> -----BEGIN PGP SIGNATURE----- iQJGBAABCAAwFiEEg1AjqC77wbdLX2LbKSR5jcyPE6QFAmg3D64SHHBhYmVuaUBy ZWRoYXQuY29tAAoJECkkeY3MjxOkcIsQAK2eEc+BxQer975wzvtMg6gF9eoex4a+ rZ7jxfDzDtNvTauoQsrpehDZp0FnySaVGCU36lHGB2OvDnhCpPc5hXzKDWQpOuqQ SHrGG3/6FTbdTG/HfHUcbNyrUzIf53SADSObiQ3qg4gyEQ3sCpcOKtVtMcU8rvsY /HqMnsJWFaROUMjMtCcnUSgjmeY9kBvha3sTXUqgeRugEOCvZD7z4rpqFIcQqHw7 e2Fi8dwIXEYNxqPp6MRq2qdyUTewCRruE8ZIMAFuhtfYeMElUZMPlqlMENX3AzTQ cr0EgwcFOUxRA7oZRxhoBNBsVXavtSpQr4ZDoWplxP4aQ37n5tc1E9Q72axpB/Og FbJRl6GvWYnCd8071BczgmfHlKaTAigPvt2Z4r6JjM5I/Bij/IZ3k+On1OTuOAj/ EqfFkdZ0a5cfKrwUMP+oSGtSAywkMVUtnIKJlZeRbjSj2432sCfe2jVAlS8ELM43 3LUgXYrAKtA87g171LlsRu5EEpI5QmqPb+i5LpPlEXe2TJEgPisyfecJ3NafF/2+ j575lm+TFNm9NTNhGGjDPEvw0djI5wSGGMe9J4gC74eWi6s5t6C4cuUf84TKWdwR x+9H0IB7rfFncAwXHJuUUtzd+fPHaYzs5dDGbSgMQOXr1cr1wlubCK8mQ1r/Wt/a 3GjFIOQKW2Q5 =t/Tz -----END PGP SIGNATURE----- Merge tag 'net-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Paolo Abeni: "Core: - Implement the Device Memory TCP transmit path, allowing zero-copy data transmission on top of TCP from e.g. GPU memory to the wire. - Move all the IPv6 routing tables management outside the RTNL scope, under its own lock and RCU. The route control path is now 3x times faster. - Convert queue related netlink ops to instance lock, reducing again the scope of the RTNL lock. This improves the control plane scalability. - Refactor the software crc32c implementation, removing unneeded abstraction layers and improving significantly the related micro-benchmarks. - Optimize the GRO engine for UDP-tunneled traffic, for a 10% performance improvement in related stream tests. - Cover more per-CPU storage with local nested BH locking; this is a prep work to remove the current per-CPU lock in local_bh_disable() on PREMPT_RT. - Introduce and use nlmsg_payload helper, combining buffer bounds verification with accessing payload carried by netlink messages. Netfilter: - Rewrite the procfs conntrack table implementation, improving considerably the dump performance. A lot of user-space tools still use this interface. - Implement support for wildcard netdevice in netdev basechain and flowtables. - Integrate conntrack information into nft trace infrastructure. - Export set count and backend name to userspace, for better introspection. BPF: - BPF qdisc support: BPF-qdisc can be implemented with BPF struct_ops programs and can be controlled in similar way to traditional qdiscs using the "tc qdisc" command. - Refactor the UDP socket iterator, addressing long standing issues WRT duplicate hits or missed sockets. Protocols: - Improve TCP receive buffer auto-tuning and increase the default upper bound for the receive buffer; overall this improves the single flow maximum thoughput on 200Gbs link by over 60%. - Add AFS GSSAPI security class to AF_RXRPC; it provides transport security for connections to the AFS fileserver and VL server. - Improve TCP multipath routing, so that the sources address always matches the nexthop device. - Introduce SO_PASSRIGHTS for AF_UNIX, to allow disabling SCM_RIGHTS, and thus preventing DoS caused by passing around problematic FDs. - Retire DCCP socket. DCCP only receives updates for bugs, and major distros disable it by default. Its removal allows for better organisation of TCP fields to reduce the number of cache lines hit in the fast path. - Extend TCP drop-reason support to cover PAWS checks. Driver API: - Reorganize PTP ioctl flag support to require an explicit opt-in for the drivers, avoiding the problem of drivers not rejecting new unsupported flags. - Converted several device drivers to timestamping APIs. - Introduce per-PHY ethtool dump helpers, improving the support for dump operations targeting PHYs. Tests and tooling: - Add support for classic netlink in user space C codegen, so that ynl-c can now read, create and modify links, routes addresses and qdisc layer configuration. - Add ynl sub-types for binary attributes, allowing ynl-c to output known struct instead of raw binary data, clarifying the classic netlink output. - Extend MPTCP selftests to improve the code-coverage. - Add tests for XDP tail adjustment in AF_XDP. New hardware / drivers: - OpenVPN virtual driver: offload OpenVPN data channels processing to the kernel-space, increasing the data transfer throughput WRT the user-space implementation. - Renesas glue driver for the gigabit ethernet RZ/V2H(P) SoC. - Broadcom asp-v3.0 ethernet driver. - AMD Renoir ethernet device. - ReakTek MT9888 2.5G ethernet PHY driver. - Aeonsemi 10G C45 PHYs driver. Drivers: - Ethernet high-speed NICs: - nVidia/Mellanox (mlx5): - refactor the steering table handling to significantly reduce the amount of memory used - add support for complex matches in H/W flow steering - improve flow streeing error handling - convert to netdev instance locking - Intel (100G, ice, igb, ixgbe, idpf): - ice: add switchdev support for LLDP traffic over VF - ixgbe: add firmware manipulation and regions devlink support - igb: introduce support for frame transmission premption - igb: adds persistent NAPI configuration - idpf: introduce RDMA support - idpf: add initial PTP support - Meta (fbnic): - extend hardware stats coverage - add devlink dev flash support - Broadcom (bnxt): - add support for RX-side device memory TCP - Wangxun (txgbe): - implement support for udp tunnel offload - complete PTP and SRIOV support for AML 25G/10G devices - Ethernet NICs embedded and virtual: - Google (gve): - add device memory TCP TX support - Amazon (ena): - support persistent per-NAPI config - Airoha: - add H/W support for L2 traffic offload - add per flow stats for flow offloading - RealTek (rtl8211): add support for WoL magic packet - Synopsys (stmmac): - dwmac-socfpga 1000BaseX support - add Loongson-2K3000 support - introduce support for hardware-accelerated VLAN stripping - Broadcom (bcmgenet): - expose more H/W stats - Freescale (enetc, dpaa2-eth): - enetc: add MAC filter, VLAN filter RSS and loopback support - dpaa2-eth: convert to H/W timestamping APIs - vxlan: convert FDB table to rhashtable, for better scalabilty - veth: apply qdisc backpressure on full ring to reduce TX drops - Ethernet switches: - Microchip (kzZ88x3): add ETS scheduler support - Ethernet PHYs: - RealTek (rtl8211): - add support for WoL magic packet - add support for PHY LEDs - CAN: - Adds RZ/G3E CANFD support to the rcar_canfd driver. - Preparatory work for CAN-XL support. - Add self-tests framework with support for CAN physical interfaces. - WiFi: - mac80211: - scan improvements with multi-link operation (MLO) - Qualcomm (ath12k): - enable AHB support for IPQ5332 - add monitor interface support to QCN9274 - add multi-link operation support to WCN7850 - add 802.11d scan offload support to WCN7850 - monitor mode for WCN7850, better 6 GHz regulatory - Qualcomm (ath11k): - restore hibernation support - MediaTek (mt76): - WiFi-7 improvements - implement support for mt7990 - Intel (iwlwifi): - enhanced multi-link single-radio (EMLSR) support on 5 GHz links - rework device configuration - RealTek (rtw88): - improve throughput for RTL8814AU - RealTek (rtw89): - add multi-link operation support - STA/P2P concurrency improvements - support different SAR configs by antenna - Bluetooth: - introduce HCI Driver protocol - btintel_pcie: do not generate coredump for diagnostic events - btusb: add HCI Drv commands for configuring altsetting - btusb: add RTL8851BE device 0x0bda:0xb850 - btusb: add new VID/PID 13d3/3584 for MT7922 - btusb: add new VID/PID 13d3/3630 and 13d3/3613 for MT7925 - btnxpuart: implement host-wakeup feature" * tag 'net-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1611 commits) selftests/bpf: Fix bpf selftest build warning selftests: netfilter: Fix skip of wildcard interface test net: phy: mscc: Stop clearing the the UDPv4 checksum for L2 frames net: openvswitch: Fix the dead loop of MPLS parse calipso: Don't call calipso functions for AF_INET sk. selftests/tc-testing: Add a test for HFSC eltree double add with reentrant enqueue behaviour on netem net_sched: hfsc: Address reentrant enqueue adding class to eltree twice octeontx2-pf: QOS: Refactor TC_HTB_LEAF_DEL_LAST callback octeontx2-pf: QOS: Perform cache sync on send queue teardown net: mana: Add support for Multi Vports on Bare metal net: devmem: ncdevmem: remove unused variable net: devmem: ksft: upgrade rx test to send 1K data net: devmem: ksft: add 5 tuple FS support net: devmem: ksft: add exit_wait to make rx test pass net: devmem: ksft: add ipv4 support net: devmem: preserve sockc_err page_pool: fix ugly page_pool formatting net: devmem: move list_add to net_devmem_bind_dmabuf. selftests: netfilter: nft_queue.sh: include file transfer duration in log message net: phy: mscc: Fix memory leak when using one step timestamping ... |
||
![]() |
c35328632e |
m68k updates for v6.16
- One more strscpy() conversion, - Fix detection of real Mac II, - Defconfig updates. -----BEGIN PGP SIGNATURE----- iIsEABYKADMWIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCaDRiLhUcZ2VlcnRAbGlu dXgtbTY4ay5vcmcACgkQisJQ/WRJ8XACmgD+I+xNAoTSirgrwRznil17AuG6dsEo jxlPKR7XRHIrO4oA/iucnB8TmIo3/v5QlHv7tam11TvOBdikKHZIc5+25h8C =hNKz -----END PGP SIGNATURE----- Merge tag 'm68k-for-v6.16-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k updates from Geert Uytterhoeven: - One more strscpy() conversion - Fix detection of real Mac II - defconfig updates * tag 'm68k-for-v6.16-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: defconfig: Update defconfigs for v6.15-rc1 m68k: mac: Fix macintosh_config for Mac II m68k: Replace strcpy() with strscpy() in hardware_proc_show() |
||
![]() |
f440518f37 |
m68k: defconfig: Update defconfigs for v6.15-rc1
- Drop CONFIG_PRIME_NUMBERS=m (auto-modular since commit |
||
![]() |
3357b6c945 |
crypto: tcrypt - rename CRYPTO_TEST to CRYPTO_BENCHMARK
tcrypt is actually a benchmarking module and not the actual tests. This regularly causes confusion. Update the kconfig option name and help text accordingly. Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
![]() |
2a63dd0edf |
net: Retire DCCP socket.
DCCP was orphaned in 2021 by commit |
||
![]() |
27bd3ce403 |
m68k updates for v6.15
- Miscellaneous fixes and improvements, - Defconfig updates. -----BEGIN PGP SIGNATURE----- iIsEABYKADMWIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZ+GpcxUcZ2VlcnRAbGlu dXgtbTY4ay5vcmcACgkQisJQ/WRJ8XA8dAD/X/aMaogRp9Afm/GHH9ImC7HW2pi5 Rdtb38PYbEFtPC8BAPcO/NvhJnPrkjS3yxJ0gm4KqAPWpUrTgsjFPnRHCikL =Otrr -----END PGP SIGNATURE----- Merge tag 'm68k-for-v6.15-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k updates from Geert Uytterhoeven: - misc fixes and improvements - defconfig updates * tag 'm68k-for-v6.15-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: defconfig: Update defconfigs for v6.14-rc1 m68k: setup: Remove size argument when calling strscpy() m68k: sun3: Fix DEBUG_MMU_EMU build m68k: sun3: Use str_read_write() helper in mmu_emu_handle_fault() |
||
![]() |
c94cf023dc |
m68k: defconfig: Update defconfigs for v6.14-rc1
- Drop CONFIG_DM_KUNIT_TEST=m (auto-modular since commit |
||
![]() |
448fa70158
|
sysv: Remove the filesystem
Since 2002 (change "Replace BKL for chain locking with sysvfs-private rwlock") the sysv filesystem was doing IO under a rwlock in its get_block() function (yes, a non-sleepable lock hold over a function used to read inode metadata for all reads and writes). Nobody noticed until syzbot in 2023 [1]. This shows nobody is using the filesystem. Just drop it. [1] https://lore.kernel.org/all/0000000000000ccf9a05ee84f5b0@google.com/ Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20250220163940.10155-2-jack@suse.cz Reviewed-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: "Darrick J. Wong" <djwong@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
![]() |
050339050f |
revert "xarray: port tests to kunit"
Revert
|
||
![]() |
c159dfbdd4 |
Mainly individually changelogged singleton patches. The patch series in
this pull are: - "lib min_heap: Improve min_heap safety, testing, and documentation" from Kuan-Wei Chiu provides various tightenings to the min_heap library code. - "xarray: extract __xa_cmpxchg_raw" from Tamir Duberstein preforms some cleanup and Rust preparation in the xarray library code. - "Update reference to include/asm-<arch>" from Geert Uytterhoeven fixes pathnames in some code comments. - "Converge on using secs_to_jiffies()" from Easwar Hariharan uses the new secs_to_jiffies() in various places where that is appropriate. - "ocfs2, dlmfs: convert to the new mount API" from Eric Sandeen switches two filesystems to the new mount API. - "Convert ocfs2 to use folios" from Matthew Wilcox does that. - "Remove get_task_comm() and print task comm directly" from Yafang Shao removes now-unneeded calls to get_task_comm() in various places. - "squashfs: reduce memory usage and update docs" from Phillip Lougher implements some memory savings in squashfs and performs some maintainability work. - "lib: clarify comparison function requirements" from Kuan-Wei Chiu tightens the sort code's behaviour and adds some maintenance work. - "nilfs2: protect busy buffer heads from being force-cleared" from Ryusuke Konishi fixes an issues in nlifs when the fs is presented with a corrupted image. - "nilfs2: fix kernel-doc comments for function return values" from Ryusuke Konishi fixes some nilfs kerneldoc. - "nilfs2: fix issues with rename operations" from Ryusuke Konishi addresses some nilfs BUG_ONs which syzbot was able to trigger. - "minmax.h: Cleanups and minor optimisations" from David Laight does some maintenance work on the min/max library code. - "Fixes and cleanups to xarray" from Kemeng Shi does maintenance work on the xarray library code. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZ5SP5QAKCRDdBJ7gKXxA jqN7AQChvwXGG43n4d5SDiA/rH7ddvowQcDqhC9cAMJ1ReR7qwEA8/LIWDE4PdMX mJnaZ1/ibpEpearrChCViApQtcyEGQI= =ti4E -----END PGP SIGNATURE----- Merge tag 'mm-nonmm-stable-2025-01-24-23-16' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-MM updates from Andrew Morton: "Mainly individually changelogged singleton patches. The patch series in this pull are: - "lib min_heap: Improve min_heap safety, testing, and documentation" from Kuan-Wei Chiu provides various tightenings to the min_heap library code - "xarray: extract __xa_cmpxchg_raw" from Tamir Duberstein preforms some cleanup and Rust preparation in the xarray library code - "Update reference to include/asm-<arch>" from Geert Uytterhoeven fixes pathnames in some code comments - "Converge on using secs_to_jiffies()" from Easwar Hariharan uses the new secs_to_jiffies() in various places where that is appropriate - "ocfs2, dlmfs: convert to the new mount API" from Eric Sandeen switches two filesystems to the new mount API - "Convert ocfs2 to use folios" from Matthew Wilcox does that - "Remove get_task_comm() and print task comm directly" from Yafang Shao removes now-unneeded calls to get_task_comm() in various places - "squashfs: reduce memory usage and update docs" from Phillip Lougher implements some memory savings in squashfs and performs some maintainability work - "lib: clarify comparison function requirements" from Kuan-Wei Chiu tightens the sort code's behaviour and adds some maintenance work - "nilfs2: protect busy buffer heads from being force-cleared" from Ryusuke Konishi fixes an issues in nlifs when the fs is presented with a corrupted image - "nilfs2: fix kernel-doc comments for function return values" from Ryusuke Konishi fixes some nilfs kerneldoc - "nilfs2: fix issues with rename operations" from Ryusuke Konishi addresses some nilfs BUG_ONs which syzbot was able to trigger - "minmax.h: Cleanups and minor optimisations" from David Laight does some maintenance work on the min/max library code - "Fixes and cleanups to xarray" from Kemeng Shi does maintenance work on the xarray library code" * tag 'mm-nonmm-stable-2025-01-24-23-16' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (131 commits) ocfs2: use str_yes_no() and str_no_yes() helper functions include/linux/lz4.h: add some missing macros Xarray: use xa_mark_t in xas_squash_marks() to keep code consistent Xarray: remove repeat check in xas_squash_marks() Xarray: distinguish large entries correctly in xas_split_alloc() Xarray: move forward index correctly in xas_pause() Xarray: do not return sibling entries from xas_find_marked() ipc/util.c: complete the kernel-doc function descriptions gcov: clang: use correct function param names latencytop: use correct kernel-doc format for func params minmax.h: remove some #defines that are only expanded once minmax.h: simplify the variants of clamp() minmax.h: move all the clamp() definitions after the min/max() ones minmax.h: use BUILD_BUG_ON_MSG() for the lo < hi test in clamp() minmax.h: reduce the #define expansion of min(), max() and clamp() minmax.h: update some comments minmax.h: add whitespace around operators and after commas nilfs2: do not update mtime of renamed directory that is not moved nilfs2: handle errors that nilfs_prepare_chunk() may return CREDITS: fix spelling mistake ... |
||
![]() |
454cb97726 |
This update includes the following changes:
API: - Remove physical address skcipher walking. - Fix boot-up self-test race. Algorithms: - Optimisations for x86/aes-gcm. - Optimisations for x86/aes-xts. - Remove VMAC. - Remove keywrap. Drivers: - Remove n2. Others: - Fixes for padata UAF. - Fix potential rhashtable deadlock by moving schedule_work outside lock. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEn51F/lCuNhUwmDeSxycdCkmxi6cFAmeSIvwACgkQxycdCkmx i6dkYw//bJ6OxIXdtsDWVtJF4GnfxLYSU33GGGMWrbwxS/EihL12rkB3JPw2avJb oFBP8rWl5Qv9tDF2gjn6TyBaydVnKMA9nUbsqKN6m/DZ/RcCpHigQ21HVzny3bhw rHsZcWoy14TXMuni1DhLnYPftbF+7qZ/pdT5WYr4MEchQhzQc6XWaS2T5by16bjn HHsPHNZj+kFDf4kKYab3jmnly8Qo0wpTMvuX1tsiUqt7YABcg3dobIisMPatxg8A CIgdBZJRivC55Cqm4JT7P+y63PsJVGCyoLXOAGoZN5CLwdTSGND12DJ1awEcOswc 7fMlCk0gDrhniUTUzP8VsP8EUCezIIpaIfne9v/0OERo6DbiuX+NeEwxWJNdIHeS vZocY5a6hS84iBdsuPrUaPqZI6oUSYFIwKPJUwbyaY4j1cfowHz8zbgmmPO5TUV7 NAI7/QpoMA3GNWn3p+64eeXekT2DcU5o3i14dbJ31FQhlFbzVWA7/2Z5ydu18Fex ntTEplPCzYrsqwuxmFDb/3dsk3Z98RquZZJzIKAXKSXTNBOYJaFOCTyugdkn18Nq p6dJNXEvl6lnjylgILa0ltv6TI8h7IRpuqi+FAqExOXR3H3gelVXUjMXnC0fmjrd +ARAzq223xPWwsKEd00Rb3FEoq0XyChvxh4n3BqM4XhSenWggOc= =/75o -----END PGP SIGNATURE----- Merge tag 'v6.14-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Remove physical address skcipher walking - Fix boot-up self-test race Algorithms: - Optimisations for x86/aes-gcm - Optimisations for x86/aes-xts - Remove VMAC - Remove keywrap Drivers: - Remove n2 Others: - Fixes for padata UAF - Fix potential rhashtable deadlock by moving schedule_work outside lock" * tag 'v6.14-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (75 commits) rhashtable: Fix rhashtable_try_insert test dt-bindings: crypto: qcom,inline-crypto-engine: Document the SM8750 ICE dt-bindings: crypto: qcom,prng: Document SM8750 RNG dt-bindings: crypto: qcom-qce: Document the SM8750 crypto engine crypto: asymmetric_keys - Remove unused key_being_used_for[] padata: avoid UAF for reorder_work padata: fix UAF in padata_reorder padata: add pd get/put refcnt helper crypto: skcipher - call cond_resched() directly crypto: skcipher - optimize initializing skcipher_walk fields crypto: skcipher - clean up initialization of skcipher_walk::flags crypto: skcipher - fold skcipher_walk_skcipher() into skcipher_walk_virt() crypto: skcipher - remove redundant check for SKCIPHER_WALK_SLOW crypto: skcipher - remove redundant clamping to page size crypto: skcipher - remove unnecessary page alignment of bounce buffer crypto: skcipher - document skcipher_walk_done() and rename some vars crypto: omap - switch from scatter_walk to plain offset crypto: powerpc/p10-aes-gcm - simplify handling of linear associated data crypto: bcm - Drop unused setting of local 'ptr' variable crypto: hisilicon/qm - support new function communication ... |
||
![]() |
c7bb5cf9fc |
xarray: port tests to kunit
Minimally rewrite the XArray unit tests to use kunit. This integrates nicely with existing kunit tools which produce nicer human-readable output compared to the existing machinery. Running the xarray tests before this change requires an obscure invocation ``` tools/testing/kunit/kunit.py run --arch arm64 --make_options LLVM=1 \ --kconfig_add CONFIG_TEST_XARRAY=y --raw_output=all nothing ``` which on failure produces ``` BUG at check_reserve:513 ... XArray: 6782340 of 6782364 tests passed ``` and exits 0. Running the xarray tests after this change requires a simpler invocation ``` tools/testing/kunit/kunit.py run --arch arm64 --make_options LLVM=1 \ xarray ``` which on failure produces (colors omitted) ``` [09:50:53] ====================== check_reserve ====================== [09:50:53] [FAILED] param-0 [09:50:53] # check_reserve: EXPECTATION FAILED at lib/test_xarray.c:536 [09:50:53] xa_erase(xa, 12345678) != NULL ... [09:50:53] # module: test_xarray [09:50:53] # xarray: pass:26 fail:3 skip:0 total:29 [09:50:53] # Totals: pass:28 fail:3 skip:0 total:31 [09:50:53] ===================== [FAILED] xarray ====================== ``` and exits 1. Use of richer kunit assertions is intentionally omitted to reduce the scope of the change. [akpm@linux-foundation.org: fix cocci warning] Link: https://lore.kernel.org/oe-kbuild-all/202412081700.YXB3vBbg-lkp@intel.com/ Link: https://lkml.kernel.org/r/20241205-xarray-kunit-port-v1-1-ee44bc7aa201@gmail.com Signed-off-by: Tamir Duberstein <tamird@gmail.com> Cc: Bill Wendling <morbo@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Justin Stitt <justinstitt@google.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Naveen N Rao <naveen@kernel.org> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
730f67d8b8 |
crypto: keywrap - remove unused keywrap algorithm
The keywrap (kw) algorithm has no in-tree user. It has never had an in-tree user, and the patch that added it provided no justification for its inclusion. Even use of it via AF_ALG is impossible, as it uses a weird calling convention where part of the ciphertext is returned via the IV buffer, which is not returned to userspace in AF_ALG. It's also unclear whether any new code in the kernel that does key wrapping would actually use this algorithm. It is controversial in the cryptographic community due to having no clearly stated security goal, no security proof, poor performance, and only a 64-bit auth tag. Later work (https://eprint.iacr.org/2006/221) suggested that the goal is deterministic authenticated encryption. But there are now more modern algorithms for this, and this is not the same as key wrapping, for which a regular AEAD such as AES-GCM usually can be (and is) used instead. Therefore, remove this unused code. There were several special cases for this algorithm in the self-tests, due to its weird calling convention. Remove those too. Cc: Stephan Mueller <smueller@chronox.de> Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
![]() |
2890601f54 |
crypto: vmac - remove unused VMAC algorithm
Remove the vmac64 template, as it has no known users. It also continues to have longstanding bugs such as alignment violations (see https://lore.kernel.org/r/20241226134847.6690-1-evepolonium@gmail.com/). This code was added in 2009 by commit |
||
![]() |
87fe0a1310 |
lib/crc32test: delete obsolete crc32test.c
Delete crc32test.c, since it has been superseded by crc_kunit.c. Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k Cc: Vinicius Peixoto <vpeixoto@lkcamp.dev> Link: https://lore.kernel.org/r/20241202012056.209768-11-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> |
||
![]() |
c01f664e4c |
\n
-----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmc/WXkACgkQnJ2qBz9k QNnwjAf/c8K3Vhw9RuKMtPF0K+gC//0mLsq+WmgrtXfMLvbSymrACnwHFJzpNGeS iEqCYlCC7vlqzPXpsVRlFeHpM52oVnE/wFF0Hp1h/Y1oqbRSzur6iSl4epmmBN+K AsPoWEXco7ABqtrhoZb0b1n7io9VorHN4nLhO6KWD83nZAawJDWgSw0sNCqcT6to vVxR3baP/EhONxNquxXe2lxq26dMilehmTk4AOyYslNYb0iG4r18TPyNb7fmuuKG M+nFfMnM9EPH8lnmgx6Mg/X77d/eZoq4pMRmeqSsroB5k/AQJnNrGweNL1+yr7OY adWNOMGWdNNQXPFgGbL5yZwNZ64kRA== =Eq1B -----END PGP SIGNATURE----- Merge tag 'reiserfs_delete' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull reiserfs removal from Jan Kara: "The deprecation period of reiserfs is ending at the end of this year so it is time to remove it" * tag 'reiserfs_delete' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: reiserfs: The last commit |
||
![]() |
647619b6bd |
m68k: defconfig: Update defconfigs for v6.12-rc1
- Enable modular build of the new mul_u64_u64_div_u64() test. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/4092672cb64b86ec3f300b4cf0ea0c2db2b52e2e.1727699197.git.geert@linux-m68k.org |
||
![]() |
fb6f20ecb1 |
reiserfs: The last commit
Deprecation period of reiserfs ends with the end of this year so it is time to remove it from the kernel. Acked-by: Darrick J. Wong <djwong@kernel.org> Acked-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Jan Kara <jack@suse.cz> |
||
![]() |
b90fae5df9 |
m68k: defconfig: Update defconfigs for v6.11-rc1
- Drop CONFIG_CRYPTO_SM2=m (removed in commit |
||
![]() |
75d3891ca1 |
m68k: defconfig: Update defconfigs for v6.10-rc1
- Enable modular build of the new Packet Forwarding Control Protocol (PFCP). Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/442176a8cd763e366ab9199b297919486c7f75f4.1716805119.git.geert@linux-m68k.org |
||
![]() |
ec8c826637 |
m68k: defconfig: Update defconfigs for v6.9-rc1
- Enable trimming of unused exported kernel symbols, - Drop CONFIG_IP_NF_ARPTABLES=m (auto-enabled since commit |
||
![]() |
e8a7824856 |
m68k: defconfig: Update defconfigs for v6.8-rc1
- Drop CONFIG_MD_LINEAR=m (removed in commit |
||
![]() |
6b9c045b06 |
m68k: defconfig: Update defconfigs for v6.7-rc1
- Enable modular build of the new bcachefs filesystem, - Drop CONFIG_CRYPTO_MANAGER=y (auto-enabled since commit |
||
![]() |
7e02d701b9 |
m68k: defconfig: Update defconfigs for v6.6-rc1
- Enable modular build of the new device model tests, - Enable modular build of the glob self-test on configs that didn't have it yet (visible since commit |
||
![]() |
e346f9dd4c |
m68k: defconfig: Update defconfigs for v6.5-rc1
- Drop CONFIG_CRYPTO_SHA3=m (auto-enabled since commit
|
||
![]() |
632f54b4d6 |
slab updates for 6.5
-----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEEe7vIQRWZI0iWSE3xu+CwddJFiJoFAmSZtjsACgkQu+CwddJF iJqCTwf/XVhmAD7zMOj6g1aak5oHNZDRG5jufM5UNXmiWjCWT3w4DpltrJkz0PPm mg3Ac5fjNUqesZ1SGtUbvoc363smroBrRudGEFrsUhqBcpR+S4fSneoDk+xqMypf VLXP/8kJlFEBGMiR7ouAWnR4+u6JgY4E8E8JIPNzao5KE/L1lD83nY+Usjc/01ek oqMyYVFRfncsGjGJXc5fOOTTCj768mRroF0sLmEegIonnwQkSHE7HWJ/nyaVraDV bomnTIgMdVIDqharin08ZPIM7qBIWM09Uifaf0lIs6fIA94pQP+5Ko3mum2P/S+U ON/qviSrlNgRXoHPJ3hvPHdfEU9cSg== =1d0v -----END PGP SIGNATURE----- Merge tag 'slab-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab Pull slab updates from Vlastimil Babka: - SLAB deprecation: Following the discussion at LSF/MM 2023 [1] and no objections, the SLAB allocator is deprecated by renaming the config option (to make its users notice) to CONFIG_SLAB_DEPRECATED with updated help text. SLUB should be used instead. Existing defconfigs with CONFIG_SLAB are also updated. - SLAB_NO_MERGE kmem_cache flag (Jesper Dangaard Brouer): There are (very limited) cases where kmem_cache merging is undesirable, and existing ways to prevent it are hacky. Introduce a new flag to do that cleanly and convert the existing hacky users. Btrfs plans to use this for debug kernel builds (that use case is always fine), networking for performance reasons (that should be very rare). - Replace the usage of weak PRNGs (David Keisar Schmidt): In addition to using stronger RNGs for the security related features, the code is a bit cleaner. - Misc code cleanups (SeongJae Parki, Xiongwei Song, Zhen Lei, and zhaoxinchao) Link: https://lwn.net/Articles/932201/ [1] * tag 'slab-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab: mm/slab_common: use SLAB_NO_MERGE instead of negative refcount mm/slab: break up RCU readers on SLAB_TYPESAFE_BY_RCU example code mm/slab: add a missing semicolon on SLAB_TYPESAFE_BY_RCU example code mm/slab_common: reduce an if statement in create_cache() mm/slab: introduce kmem_cache flag SLAB_NO_MERGE mm/slab: rename CONFIG_SLAB to CONFIG_SLAB_DEPRECATED mm/slab: remove HAVE_HARDENED_USERCOPY_ALLOCATOR mm/slab_common: Replace invocation of weak PRNG mm/slab: Replace invocation of weak PRNG slub: Don't read nr_slabs and total_objects directly slub: Remove slabs_node() function slub: Remove CONFIG_SMP defined check slub: Put objects_show() into CONFIG_SLUB_DEBUG enabled block slub: Correct the error code when slab_kset is NULL mm/slab: correct return values in comment for _kmem_cache_create() |
||
![]() |
4055eabe04 |
m68k: defconfig: Update defconfigs for v6.4-rc1
- Enable modular build of the new DMA pool test, - Drop CONFIG_PRINT_QUOTA_WARNING=n (auto-disabled since commit |
||
![]() |
eb07c4f39c |
mm/slab: rename CONFIG_SLAB to CONFIG_SLAB_DEPRECATED
As discussed at LSF/MM [1] [2] and with no objections raised there, deprecate the SLAB allocator. Rename the user-visible option so that users with CONFIG_SLAB=y get a new prompt with explanation during make oldconfig, while make olddefconfig will just switch to SLUB. In all defconfigs with CONFIG_SLAB=y remove the line so those also switch to SLUB. Regressions due to the switch should be reported to linux-mm and slab maintainers. [1] https://lore.kernel.org/all/4b9fc9c6-b48c-198f-5f80-811a44737e5f@suse.cz/ [2] https://lwn.net/Articles/932201/ Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Acked-by: David Rientjes <rientjes@google.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k Acked-by: Helge Deller <deller@gmx.de> # parisc |
||
![]() |
1ea3bb3e4b |
m68k: defconfig: Update defconfigs for v6.3-rc1
- Drop CONFIG_IP_NF_TARGET_CLUSTERIP=m (removed in commit |
||
![]() |
65a1601609 |
m68k: defconfig: Update defconfigs for v6.2-rc3
- Drop CONFIG_NFT_OBJREF=m (removed in commit |
||
![]() |
553b20b211 |
m68k: defconfig: Update defconfigs for v6.1-rc1
- Shuffle crypto configuration (cfr. commit
|
||
![]() |
15f9042311 |
m68k: defconfig: Update defconfigs for v6.0-rc2
- Drop CONFIG_NF_CONNTRACK_PROCFS=n (no longer auto-enabled since commit |
||
![]() |
b508128bb0 |
m68k: defconfig: Update defconfigs for v5.19-rc1
- Move CONFIG_USERFAULTFD=y (moved in commit |
||
![]() |
a96e4ebf3d |
m68k: defconfig: Update defconfigs for v5.18-rc1
- Drop CONFIG_BINFMT_AOUT=m (no longer available since commit |
||
![]() |
14705fda8f |
New features:
- NFSv3 support in NFSD is now always built - Added NFSD support for the NFSv4 birth-time file attribute - Added support for storing and displaying sockaddrs in trace points - NFSD now recognizes RPC_AUTH_TLS probes Performance improvements: - Optimized the svc transport enqueuing mechanism - Added micro-optimizations for the duplicate reply cache Notable bug fixes: - Allocation of the NFSD file cache hash table is more reliable -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEKLLlsBKG3yQ88j7+M2qzM29mf5cFAmI3XNkACgkQM2qzM29m f5dNERAAqJ/nzfVp2H5BKLszJ7p/s13wFqbW719Rzymzl6/tUUHOqIsVdBsJsa/b BdZQLLDwa6ZB5zOAnC6FosRKYu4lwixOOf94pC6a9ZDD/glYVKF8mZG+RZXPAy16 g3JUOi/bcyHXv0ZUhbv7DqW+HHM+owPP4vlNJ9ChiiLr/Xdp8NBKj+4Qtn/wcAo+ Xuvx7fU/5Mbemh+dd5mWker4afHvpt9V6U6s04m5LiTPPnHVnxmeyekJGUCOY0QO cm/6SPNDqyn/VEfM/SRxEnLE9QcHRhZo/4PKRGF4wYolcviIogbILE1M7Ig/r/Gv 6Du2kcRAhyZ3zgWnu799Ivn3Q6IrVjxZwqmsi7YHURTwYKyZtxYsUk0MCBcpnxrE WyTS2onpElbMop3viKCnQdpIetbsHnUNg3udUV6ugbdCbnZuhUw5B/d6x0o8ZWDE C0f+jnX+GnBstn0vkcj2H0+VQTd5hUJtXMrooI42ODJoboQRZcmePwoXjqCmw3sy PXTxLZC/5+4zNHGUuz4Pq4V7FKr4nHhDzaW4ZDO3mILx4ahceotulY1B/yoBUu8o /LAhu2kJ6nFQkmpzdrGzPeOstgJYHm9CaitRvMzg+NJxEAJdebypdQDbX5iNpgfW MDXH4n8eIqroTlQ/mQYEV0EbC7BaTqSCL6rQdcrcFUPu9n4Fcno= =5nac -----END PGP SIGNATURE----- Merge tag 'nfsd-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux Pull nfsd updates from Chuck Lever: "New features: - NFSv3 support in NFSD is now always built - Added NFSD support for the NFSv4 birth-time file attribute - Added support for storing and displaying sockaddrs in trace points - NFSD now recognizes RPC_AUTH_TLS probes Performance improvements: - Optimized the svc transport enqueuing mechanism - Added micro-optimizations for the duplicate reply cache Notable bug fixes: - Allocation of the NFSD file cache hash table is more reliable" * tag 'nfsd-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (30 commits) nfsd: fix using the correct variable for sizeof() nfsd: use correct format characters NFSD: prevent integer overflow on 32 bit systems NFSD: prevent underflow in nfssvc_decode_writeargs() fs/lock: documentation cleanup. Replace inode->i_lock with flc_lock. NFSD: Fix nfsd_breaker_owns_lease() return values NFSD: Clean up _lm_ operation names arch: Remove references to CONFIG_NFSD_V3 in the default configs NFSD: Remove CONFIG_NFSD_V3 nfsd: more robust allocation failure handling in nfsd_file_cache_init SUNRPC: Teach server to recognize RPC_AUTH_TLS NFSD: Move svc_serv_ops::svo_function into struct svc_serv NFSD: Remove svc_serv_ops::svo_module SUNRPC: Remove svc_shutdown_net() SUNRPC: Rename svc_close_xprt() SUNRPC: Rename svc_create_xprt() SUNRPC: Remove svo_shutdown method SUNRPC: Merge svc_do_enqueue_xprt() into svc_enqueue_xprt() SUNRPC: Remove the .svo_enqueue_xprt method SUNRPC: Record endpoint information in trace log ... |
||
![]() |
f3e4080edd |
arch: Remove references to CONFIG_NFSD_V3 in the default configs
CONFIG_NFSD_V3 has been removed. NFSD support for NFSv3 can no longer be disabled. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> |
||
![]() |
ee55c9c573 |
m68k: defconfig: Update defconfigs for v5.17-rc3
- Drop CONFIG_NFT_COUNTER=m (removed in commit |
||
![]() |
0a4ee51818 |
mm: remove cleancache
Patch series "remove Xen tmem leftovers".
Since the removal of the Xen tmem driver in 2019, the cleancache hooks
are entirely unused, as are large parts of frontswap. This series
against linux-next (with the folio changes included) removes
cleancaches, and cuts down frontswap to the bits actually used by zswap.
This patch (of 13):
The cleancache subsystem is unused since the removal of Xen tmem driver
in commit
|
||
![]() |
1a0ae068bf |
m68k: defconfig: Update defconfigs for v5.16-rc1
- Drop CONFIG_MCTP=m (can no longer be modular since commit |
||
![]() |
8a3c0a74ae |
m68k: defconfig: Update defconfigs for v5.15-rc1
- Enable modular build of the new MCTP networking core protocol, - Enable modular build of the new NTFS Read-Write file system support (incl. external compressions lzx/xpress), - Enable modular build of the MD4 digest algorithm (no longer auto-selected since commit |
||
![]() |
07aa6c73e7 |
m68k: defconfig: Update defconfigs for v5.14-rc1
- Enable modular build of the new Netfilter base hook dump support, - Drop CONFIG_SCSI=y (selected by ATA, as enabled since commit |
||
![]() |
b44bf9410a |
m68k: defconfig: Update defconfigs for v5.13-rc1
- Drop CONFIG_NF_LOG_NETDEV=m (removed in commit |
||
![]() |
efdf262e11 |
m68k: defconfig: Update defconfigs for v5.12-rc1
- Drop CONFIG_CRYPTO_RMD128=m (removed in commit |
||
![]() |
ab5cbfc2fe |
m68k: defconfig: Update defconfigs for v5.11-rc1
- Enable modular build of netfilter nf_tables netdev REJECT support, - Enable modular build of the resource and cmdline API unit tests. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/20201228104232.1421134-1-geert@linux-m68k.org |
||
![]() |
8ae0b65ac7 |
m68k: defconfig: Enable KUnit tests
Enable KUnit and all KUnit tests for modular builds, so they are available when needed, just like non-KUnit tests. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/20201026122622.3092658-1-geert@linux-m68k.org |
||
![]() |
95526cccc4 |
m68k: defconfig: Update defconfigs for v5.10-rc1
- Enable modular build of SM2 crypto algorithm,
- Drop CONFIG_CRYPTO_SM3=m (auto-enabled by CONFIG_CRYPTO_SM2),
- Drop CONFIG_TEST_BITFIELD=m (converted to KUnit in commit
|
||
![]() |
382f429bb5 |
m68k: defconfig: Update defconfigs for v5.8-rc3
- Re-enable modular build of DES crypto algorithm (no longer
auto-enabled since commit
|