mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
synced 2025-08-27 06:50:37 +00:00
loongarch-next
3112 Commits
Author | SHA1 | Message | Date | |
---|---|---|---|---|
![]() |
d9d87d90cc |
treewide: rename GPIO set callbacks back to their original names
The conversion of all GPIO drivers to using the .set_rv() and .set_multiple_rv() callbacks from struct gpio_chip (which - unlike their predecessors - return an integer and allow the controller drivers to indicate failures to users) is now complete and the legacy ones have been removed. Rename the new callbacks back to their original names in one sweeping change. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> |
||
![]() |
8be4d31cb8 |
Networking changes for 6.17.
Core & protocols ---------------- - Wrap datapath globals into net_aligned_data, to avoid false sharing. - Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container). - Add SO_INQ and SCM_INQ support to AF_UNIX. - Add SIOCINQ support to AF_VSOCK. - Add TCP_MAXSEG sockopt to MPTCP. - Add IPv6 force_forwarding sysctl to enable forwarding per interface. - Make TCP validation of whether packet fully fits in the receive window and the rcv_buf more strict. With increased use of HW aggregation a single "packet" can be multiple 100s of kB. - Add MSG_MORE flag to optimize large TCP transmissions via sockmap, improves latency up to 33% for sockmap users. - Convert TCP send queue handling from tasklet to BH workque. - Improve BPF iteration over TCP sockets to see each socket exactly once. - Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code. - Support enabling kernel threads for NAPI processing on per-NAPI instance basis rather than a whole device. Fully stop the kernel NAPI thread when threaded NAPI gets disabled. Previously thread would stick around until ifdown due to tricky synchronization. - Allow multicast routing to take effect on locally-generated packets. - Add output interface argument for End.X in segment routing. - MCTP: add support for gateway routing, improve bind() handling. - Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink. - Add a new neighbor flag ("extern_valid"), which cedes refresh responsibilities to userspace. This is needed for EVPN multi-homing where a neighbor entry for a multi-homed host needs to be synced across all the VTEPs among which the host is multi-homed. - Support NUD_PERMANENT for proxy neighbor entries. - Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM. - Add sequence numbers to netconsole messages. Unregister netconsole's console when all net targets are removed. Code refactoring. Add a number of selftests. - Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol should be used for an inbound SA lookup. - Support inspecting ref_tracker state via DebugFS. - Don't force bonding advertisement frames tx to ~333 ms boundaries. Add broadcast_neighbor option to send ARP/ND on all bonded links. - Allow providing upcall pid for the 'execute' command in openvswitch. - Remove DCCP support from Netfilter's conntrack. - Disallow multiple packet duplications in the queuing layer. - Prevent use of deprecated iptables code on PREEMPT_RT. Driver API ---------- - Support RSS and hashing configuration over ethtool Netlink. - Add dedicated ethtool callbacks for getting and setting hashing fields. - Add support for power budget evaluation strategy in PSE / Power-over-Ethernet. Generate Netlink events for overcurrent etc. - Support DPLL phase offset monitoring across all device inputs. Support providing clock reference and SYNC over separate DPLL inputs. - Support traffic classes in devlink rate API for bandwidth management. - Remove rtnl_lock dependency from UDP tunnel port configuration. Device drivers -------------- - Add a new Broadcom driver for 800G Ethernet (bnge). - Add a standalone driver for Microchip ZL3073x DPLL. - Remove IBM's NETIUCV device driver. - Ethernet high-speed NICs: - Broadcom (bnxt): - support zero-copy Tx of DMABUF memory - take page size into account for page pool recycling rings - Intel (100G, ice, idpf): - idpf: XDP and AF_XDP support preparations - idpf: add flow steering - add link_down_events statistic - clean up the TSPLL code - preparations for live VM migration - nVidia/Mellanox: - support zero-copy Rx/Tx interfaces (DMABUF and io_uring) - optimize context memory usage for matchers - expose serial numbers in devlink info - support PCIe congestion metrics - Meta (fbnic): - add 25G, 50G, and 100G link modes to phylink - support dumping FW logs - Marvell/Cavium: - support for CN20K generation of the Octeon chips - Amazon: - add HW clock (without timestamping, just hypervisor time access) - Ethernet virtual: - VirtIO net: - support segmentation of UDP-tunnel-encapsulated packets - Google (gve): - support packet timestamping and clock synchronization - Microsoft vNIC: - add handler for device-originated servicing events - allow dynamic MSI-X vector allocation - support Tx bandwidth clamping - Ethernet NICs consumer, and embedded: - AMD: - amd-xgbe: hardware timestamping and PTP clock support - Broadcom integrated MACs (bcmgenet, bcmasp): - use napi_complete_done() return value to support NAPI polling - add support for re-starting auto-negotiation - Broadcom switches (b53): - support BCM5325 switches - add bcm63xx EPHY power control - Synopsys (stmmac): - lots of code refactoring and cleanups - TI: - icssg-prueth: read firmware-names from device tree - icssg: PRP offload support - Microchip: - lan78xx: convert to PHYLINK for improved PHY and MAC management - ksz: add KSZ8463 switch support - Intel: - support similar queue priority scheme in multi-queue and time-sensitive networking (taprio) - support packet pre-emption in both - RealTek (r8169): - enable EEE at 5Gbps on RTL8126 - Airoha: - add PPPoE offload support - MDIO bus controller for Airoha AN7583 - Ethernet PHYs: - support for the IPQ5018 internal GE PHY - micrel KSZ9477 switch-integrated PHYs: - add MDI/MDI-X control support - add RX error counters - add cable test support - add Signal Quality Indicator (SQI) reporting - dp83tg720: improve reset handling and reduce link recovery time - support bcm54811 (and its MII-Lite interface type) - air_en8811h: support resume/suspend - support PHY counters for QCA807x and QCA808x - support WoL for QCA807x - CAN drivers: - rcar_canfd: support for Transceiver Delay Compensation - kvaser: report FW versions via devlink dev info - WiFi: - extended regulatory info support (6 GHz) - add statistics and beacon monitor for Multi-Link Operation (MLO) - support S1G aggregation, improve S1G support - add Radio Measurement action fields - support per-radio RTS threshold - some work around how FIPS affects wifi, which was wrong (RC4 is used by TKIP, not only WEP) - improvements for unsolicited probe response handling - WiFi drivers: - RealTek (rtw88): - IBSS mode for SDIO devices - RealTek (rtw89): - BT coexistence for MLO/WiFi7 - concurrent station + P2P support - support for USB devices RTL8851BU/RTL8852BU - Intel (iwlwifi): - use embedded PNVM in (to be released) FW images to fix compatibility issues - many cleanups (unused FW APIs, PCIe code, WoWLAN) - some FIPS interoperability - MediaTek (mt76): - firmware recovery improvements - more MLO work - Qualcomm/Atheros (ath12k): - fix scan on multi-radio devices - more EHT/Wi-Fi 7 features - encapsulation/decapsulation offload - Broadcom (brcm80211): - support SDIO 43751 device - Bluetooth: - hci_event: add support for handling LE BIG Sync Lost event - ISO: add socket option to report packet seqnum via CMSG - ISO: support SCM_TIMESTAMPING for ISO TS - Bluetooth drivers: - intel_pcie: support Function Level Reset - nxpuart: add support for 4M baudrate - nxpuart: implement powerup sequence, reset, FW dump, and FW loading Signed-off-by: Jakub Kicinski <kuba@kernel.org> -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmiFgLgACgkQMUZtbf5S IrvafxAAnQRwYBoIG+piCILx6z5pRvBGHkmEQ4AQgSCFuq2eO3ubwMFIqEybfma1 5+QFjUZAV3OgGgKRBS2KGWxtSzdiF+/JGV1VOIN67sX3Mm0a2QgjA4n5CgKL0FPr o6BEzjX5XwG1zvGcBNQ5BZ19xUUKjoZQgTtnea8sZ57Fsp5RtRgmYRqoewNvNk/n uImh0NFsDVb0UeOpSzC34VD9l1dJvLGdui4zJAjno/vpvmT1DkXjoK419J/r52SS X+5WgsfJ6DkjHqVN1tIhhK34yWqBOcwGFZJgEnWHMkFIl2FqRfFKMHyqtfLlVnLA mnIpSyz8Sq2AHtx0TlgZ3At/Ri8p5+yYJgHOXcDKyABa8y8Zf4wrycmr6cV9JLuL z54nLEVnJuvfDVDVJjsLYdJXyhMpZFq6+uAItdxKaw8Ugp/QqG4QtoRj+XIHz4ZW z6OohkCiCzTwEISFK+pSTxPS30eOxq43kCspcvuLiwCCStJBRkRb5GdZA4dm7LA+ 1Od4ADAkHjyrFtBqTyyC2scX8UJ33DlAIpAYyIeS6w9Cj9EXxtp1z33IAAAZ03MW jJwIaJuc8bK2fWKMmiG7ucIXjPo4t//KiWlpkwwqLhPbjZgfDAcxq1AC2TLoqHBL y4EOgKpHDCMAghSyiFIAn2JprGcEt8dp+11B0JRXIn4Pm/eYDH8= =lqbe -----END PGP SIGNATURE----- Merge tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core & protocols: - Wrap datapath globals into net_aligned_data, to avoid false sharing - Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container) - Add SO_INQ and SCM_INQ support to AF_UNIX - Add SIOCINQ support to AF_VSOCK - Add TCP_MAXSEG sockopt to MPTCP - Add IPv6 force_forwarding sysctl to enable forwarding per interface - Make TCP validation of whether packet fully fits in the receive window and the rcv_buf more strict. With increased use of HW aggregation a single "packet" can be multiple 100s of kB - Add MSG_MORE flag to optimize large TCP transmissions via sockmap, improves latency up to 33% for sockmap users - Convert TCP send queue handling from tasklet to BH workque - Improve BPF iteration over TCP sockets to see each socket exactly once - Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code - Support enabling kernel threads for NAPI processing on per-NAPI instance basis rather than a whole device. Fully stop the kernel NAPI thread when threaded NAPI gets disabled. Previously thread would stick around until ifdown due to tricky synchronization - Allow multicast routing to take effect on locally-generated packets - Add output interface argument for End.X in segment routing - MCTP: add support for gateway routing, improve bind() handling - Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink - Add a new neighbor flag ("extern_valid"), which cedes refresh responsibilities to userspace. This is needed for EVPN multi-homing where a neighbor entry for a multi-homed host needs to be synced across all the VTEPs among which the host is multi-homed - Support NUD_PERMANENT for proxy neighbor entries - Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM - Add sequence numbers to netconsole messages. Unregister netconsole's console when all net targets are removed. Code refactoring. Add a number of selftests - Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol should be used for an inbound SA lookup - Support inspecting ref_tracker state via DebugFS - Don't force bonding advertisement frames tx to ~333 ms boundaries. Add broadcast_neighbor option to send ARP/ND on all bonded links - Allow providing upcall pid for the 'execute' command in openvswitch - Remove DCCP support from Netfilter's conntrack - Disallow multiple packet duplications in the queuing layer - Prevent use of deprecated iptables code on PREEMPT_RT Driver API: - Support RSS and hashing configuration over ethtool Netlink - Add dedicated ethtool callbacks for getting and setting hashing fields - Add support for power budget evaluation strategy in PSE / Power-over-Ethernet. Generate Netlink events for overcurrent etc - Support DPLL phase offset monitoring across all device inputs. Support providing clock reference and SYNC over separate DPLL inputs - Support traffic classes in devlink rate API for bandwidth management - Remove rtnl_lock dependency from UDP tunnel port configuration Device drivers: - Add a new Broadcom driver for 800G Ethernet (bnge) - Add a standalone driver for Microchip ZL3073x DPLL - Remove IBM's NETIUCV device driver - Ethernet high-speed NICs: - Broadcom (bnxt): - support zero-copy Tx of DMABUF memory - take page size into account for page pool recycling rings - Intel (100G, ice, idpf): - idpf: XDP and AF_XDP support preparations - idpf: add flow steering - add link_down_events statistic - clean up the TSPLL code - preparations for live VM migration - nVidia/Mellanox: - support zero-copy Rx/Tx interfaces (DMABUF and io_uring) - optimize context memory usage for matchers - expose serial numbers in devlink info - support PCIe congestion metrics - Meta (fbnic): - add 25G, 50G, and 100G link modes to phylink - support dumping FW logs - Marvell/Cavium: - support for CN20K generation of the Octeon chips - Amazon: - add HW clock (without timestamping, just hypervisor time access) - Ethernet virtual: - VirtIO net: - support segmentation of UDP-tunnel-encapsulated packets - Google (gve): - support packet timestamping and clock synchronization - Microsoft vNIC: - add handler for device-originated servicing events - allow dynamic MSI-X vector allocation - support Tx bandwidth clamping - Ethernet NICs consumer, and embedded: - AMD: - amd-xgbe: hardware timestamping and PTP clock support - Broadcom integrated MACs (bcmgenet, bcmasp): - use napi_complete_done() return value to support NAPI polling - add support for re-starting auto-negotiation - Broadcom switches (b53): - support BCM5325 switches - add bcm63xx EPHY power control - Synopsys (stmmac): - lots of code refactoring and cleanups - TI: - icssg-prueth: read firmware-names from device tree - icssg: PRP offload support - Microchip: - lan78xx: convert to PHYLINK for improved PHY and MAC management - ksz: add KSZ8463 switch support - Intel: - support similar queue priority scheme in multi-queue and time-sensitive networking (taprio) - support packet pre-emption in both - RealTek (r8169): - enable EEE at 5Gbps on RTL8126 - Airoha: - add PPPoE offload support - MDIO bus controller for Airoha AN7583 - Ethernet PHYs: - support for the IPQ5018 internal GE PHY - micrel KSZ9477 switch-integrated PHYs: - add MDI/MDI-X control support - add RX error counters - add cable test support - add Signal Quality Indicator (SQI) reporting - dp83tg720: improve reset handling and reduce link recovery time - support bcm54811 (and its MII-Lite interface type) - air_en8811h: support resume/suspend - support PHY counters for QCA807x and QCA808x - support WoL for QCA807x - CAN drivers: - rcar_canfd: support for Transceiver Delay Compensation - kvaser: report FW versions via devlink dev info - WiFi: - extended regulatory info support (6 GHz) - add statistics and beacon monitor for Multi-Link Operation (MLO) - support S1G aggregation, improve S1G support - add Radio Measurement action fields - support per-radio RTS threshold - some work around how FIPS affects wifi, which was wrong (RC4 is used by TKIP, not only WEP) - improvements for unsolicited probe response handling - WiFi drivers: - RealTek (rtw88): - IBSS mode for SDIO devices - RealTek (rtw89): - BT coexistence for MLO/WiFi7 - concurrent station + P2P support - support for USB devices RTL8851BU/RTL8852BU - Intel (iwlwifi): - use embedded PNVM in (to be released) FW images to fix compatibility issues - many cleanups (unused FW APIs, PCIe code, WoWLAN) - some FIPS interoperability - MediaTek (mt76): - firmware recovery improvements - more MLO work - Qualcomm/Atheros (ath12k): - fix scan on multi-radio devices - more EHT/Wi-Fi 7 features - encapsulation/decapsulation offload - Broadcom (brcm80211): - support SDIO 43751 device - Bluetooth: - hci_event: add support for handling LE BIG Sync Lost event - ISO: add socket option to report packet seqnum via CMSG - ISO: support SCM_TIMESTAMPING for ISO TS - Bluetooth drivers: - intel_pcie: support Function Level Reset - nxpuart: add support for 4M baudrate - nxpuart: implement powerup sequence, reset, FW dump, and FW loading" * tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits) dpll: zl3073x: Fix build failure selftests: bpf: fix legacy netfilter options ipv6: annotate data-races around rt->fib6_nsiblings ipv6: fix possible infinite loop in fib6_info_uses_dev() ipv6: prevent infinite loop in rt6_nlmsg_size() ipv6: add a retry logic in net6_rt_notify() vrf: Drop existing dst reference in vrf_ip6_input_dst net/sched: taprio: align entry index attr validation with mqprio net: fsl_pq_mdio: use dev_err_probe selftests: rtnetlink.sh: remove esp4_offload after test vsock: remove unnecessary null check in vsock_getname() igb: xsk: solve negative overflow of nb_pkts in zerocopy mode stmmac: xsk: fix negative overflow of budget in zerocopy mode dt-bindings: ieee802154: Convert at86rf230.txt yaml format net: dsa: microchip: Disable PTP function of KSZ8463 net: dsa: microchip: Setup fiber ports for KSZ8463 net: dsa: microchip: Write switch MAC address differently for KSZ8463 net: dsa: microchip: Use different registers for KSZ8463 net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver dt-bindings: net: dsa: microchip: Add KSZ8463 switch support ... |
||
![]() |
3bb38c5271 |
m68k updates for v6.17
- Ptdescs conversions, - Fix lost column on the graphical debug console, - Replace __ASSEMBLY__ with __ASSEMBLER__ in headers, - Miscellaneous fixes and improvements, - Defconfig updates. -----BEGIN PGP SIGNATURE----- iIsEABYKADMWIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCaIdDDxUcZ2VlcnRAbGlu dXgtbTY4ay5vcmcACgkQisJQ/WRJ8XBVKwD/SKcbj6IyH4ZnkN6BxzLQkc68Z4sy xjL+7C33y74UrucA/A8SWOU/a5Itkrhb1lZX+vi9wAibV3IqYGXqd/H9gFgF =bFvu -----END PGP SIGNATURE----- Merge tag 'm68k-for-v6.17-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k updates from Geert Uytterhoeven: - ptdescs conversions - Fix lost column on the graphical debug console - Replace __ASSEMBLY__ with __ASSEMBLER__ in headers - Miscellaneous fixes and improvements - defconfig updates * tag 'm68k-for-v6.17-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: mac: Improve clocksource driver commentary m68k: defconfig: Update defconfigs for v6.16-rc2 m68k: Replace __ASSEMBLY__ with __ASSEMBLER__ in non-uapi headers m68k: Replace __ASSEMBLY__ with __ASSEMBLER__ in uapi headers m68k: Enable dead code elimination m68k: Don't unregister boot console needlessly m68k: Remove unused "cursor home" code from debug console m68k: Avoid pointless recursion in debug console rendering m68k: Fix lost column on framebuffer debug console m68k: mm: Convert pointer table macros to use ptdescs m68k: mm: Convert init_pointer_table() to use ptdescs m68k: mm: Convert free_pointer_table() to use ptdescs m68k: mm: Convert get_pointer_table() to use ptdescs |
||
![]() |
91e60731dd |
TTY / Serial driver update for 6.17-rc1
Here is the big set of TTY and Serial driver updates for 6.17-rc1. Included in here is the following types of changes: - another cleanup round from Jiri for the 8250 serial driver and some other tty drivers, things are slowly getting better with our apis thanks to this work. This touched many tty drivers all over the tree. - qcom_geni_serial driver update for new platforms and devices - 8250 quirk handling fixups - dt serial binding updates for different boards/platforms - other minor cleanups and fixes All of these have been in linux-next with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaIeWPw8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ymQHgCfR3KXFe7ElzXQqjJhtN/ej6IPijIAoI6k3g0m 4UewNOIef9XpIAJ8zuoo =850o -----END PGP SIGNATURE----- Merge tag 'tty-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial driver updates from Greg KH: "Here is the big set of TTY and Serial driver updates for 6.17-rc1. Included in here is the following types of changes: - another cleanup round from Jiri for the 8250 serial driver and some other tty drivers, things are slowly getting better with our apis thanks to this work. This touched many tty drivers all over the tree. - qcom_geni_serial driver update for new platforms and devices - 8250 quirk handling fixups - dt serial binding updates for different boards/platforms - other minor cleanups and fixes All of these have been in linux-next with no reported issues" * tag 'tty-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (79 commits) dt-bindings: serial: snps-dw-apb-uart: Allow use of a power-domain serial: 8250: fix panic due to PSLVERR dt-bindings: serial: samsung: add samsung,exynos2200-uart compatible vt: defkeymap: Map keycodes above 127 to K_HOLE vt: keyboard: Don't process Unicode characters in K_OFF mode serial: qcom-geni: Enable Serial on SA8255p Qualcomm platforms serial: qcom-geni: Enable PM runtime for serial driver serial: qcom-geni: move clock-rate logic to separate function serial: qcom-geni: move resource control logic to separate functions serial: qcom-geni: move resource initialization to separate function soc: qcom: geni-se: Enable QUPs on SA8255p Qualcomm platforms dt-bindings: qcom: geni-se: describe SA8255p dt-bindings: serial: describe SA8255p serial: 8250_dw: Fix typo "notifer" dt-bindings: serial: 8250: spacemit: set clocks property as required dt-bindings: serial: renesas: Document RZ/V2N SCIF serial: 8250_ce4100: Fix CONFIG_SERIAL_8250=n build tty: omit need_resched() before cond_resched() serial: 8250_ni: Reorder local variables serial: 8250_ni: Fix build warning ... |
||
![]() |
d900c4ce63 |
execve updates for v6.17
- Introduce regular REGSET note macros arch-wide (Dave Martin) - Remove arbitrary 4K limitation of program header size (Yin Fengwei) - Reorder function qualifiers for copy_clone_args_from_user() (Dishank Jogi) -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRSPkdeREjth1dHnSE2KwveOeQkuwUCaIVKiAAKCRA2KwveOeQk u4zBAP4zUNj2+XyixVPXCzv+Hkle6zWs7yrzdA2yLxe8Qtwj5AD+N2I6MUGcCFGW W+uWxlWTtGLDqh1CplIUqTlxMi39Og4= =vYnE -----END PGP SIGNATURE----- Merge tag 'execve-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull execve updates from Kees Cook: - Introduce regular REGSET note macros arch-wide (Dave Martin) - Remove arbitrary 4K limitation of program header size (Yin Fengwei) - Reorder function qualifiers for copy_clone_args_from_user() (Dishank Jogi) * tag 'execve-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (25 commits) fork: reorder function qualifiers for copy_clone_args_from_user binfmt_elf: remove the 4k limitation of program header size binfmt_elf: Warn on missing or suspicious regset note names xtensa: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names um: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names x86/ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names sparc: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names sh: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names s390/ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names riscv: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names powerpc/ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names parisc: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names openrisc: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names nios2: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names MIPS: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names m68k: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names LoongArch: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names hexagon: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names csky: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names arm64: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names ... |
||
![]() |
57fcb7d930 |
vfs-6.17-rc1.fileattr
-----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaINCpgAKCRCRxhvAZXjc oqfFAQDcy3rROUF3W34KcSi7rDmaKVSX53d1tUoqH+1zDRpSlwEAriKDNC1ybudp YAnxVzkRHjHs1296WIuwKq5lfhJ60Q4= =geAl -----END PGP SIGNATURE----- Merge tag 'vfs-6.17-rc1.fileattr' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs Pull fileattr updates from Christian Brauner: "This introduces the new file_getattr() and file_setattr() system calls after lengthy discussions. Both system calls serve as successors and extensible companions to the FS_IOC_FSGETXATTR and FS_IOC_FSSETXATTR system calls which have started to show their age in addition to being named in a way that makes it easy to conflate them with extended attribute related operations. These syscalls allow userspace to set filesystem inode attributes on special files. One of the usage examples is the XFS quota projects. XFS has project quotas which could be attached to a directory. All new inodes in these directories inherit project ID set on parent directory. The project is created from userspace by opening and calling FS_IOC_FSSETXATTR on each inode. This is not possible for special files such as FIFO, SOCK, BLK etc. Therefore, some inodes are left with empty project ID. Those inodes then are not shown in the quota accounting but still exist in the directory. This is not critical but in the case when special files are created in the directory with already existing project quota, these new inodes inherit extended attributes. This creates a mix of special files with and without attributes. Moreover, special files with attributes don't have a possibility to become clear or change the attributes. This, in turn, prevents userspace from re-creating quota project on these existing files. In addition, these new system calls allow the implementation of additional attributes that we couldn't or didn't want to fit into the legacy ioctls anymore" * tag 'vfs-6.17-rc1.fileattr' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: fs: tighten a sanity check in file_attr_to_fileattr() tree-wide: s/struct fileattr/struct file_kattr/g fs: introduce file_getattr and file_setattr syscalls fs: prepare for extending file_get/setattr() fs: make vfs_fileattr_[get|set] return -EOPNOTSUPP selinux: implement inode_file_[g|s]etattr hooks lsm: introduce new hooks for setting/getting inode fsxattr fs: split fileattr related helpers into separate file |
||
![]() |
e572168e8d |
m68k: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
Instead of having the core code guess the note name for each regset, use USER_REGSET_NOTE_TYPE() to pick the correct name from elf.h. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Kees Cook <kees@kernel.org> Cc: Akihiko Odaki <akihiko.odaki@daynix.com> Cc: linux-m68k@lists.linux-m68k.org Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Akihiko Odaki <odaki@rsg.ci.i.u-tokyo.ac.jp> Link: https://lore.kernel.org/r/20250701135616.29630-11-Dave.Martin@arm.com Signed-off-by: Kees Cook <kees@kernel.org> |
||
![]() |
c8995932db |
m68k: mac: Improve clocksource driver commentary
qemu-system-m68k -M q800 has an old bug that causes the kernel to occasionally complain about a soft lockup: watchdog: BUG: soft lockup - CPU#0 stuck for 5107s! There isn't any actual lockup. The via1 clocksource produced a large jump in jiffies, causing the watchdog to detect a stale timestamp. The 32-bit clocksource counter runs at 783360 Hz and its period is about 5482 seconds. Applying the "nanosecond" approximation used in get_timestamp() in kernel/watchdog.c then yields the duration reported in the log message above (always 5107 or 5108 in my tests): 0xffffffff / VIA_CLOCK_FREQ * 10**9 / 2**30 = 5106.209 seconds It is notoriously difficult to correctly emulate a MOS6522 VIA chip. So it seems wise to document the VIA clocksource driver better, especially those hardware behaviours which the kernel relies upon. Cc: Joshua Thompson <funaho@jurai.org> Signed-off-by: Finn Thain <fthain@linux-m68k.org> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/f7b4c02a1c8ed74ccceb5535d7e1e202deada8ce.1750739568.git.fthain@linux-m68k.org Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> |
||
![]() |
c4958c118c |
m68k: defconfig: Update defconfigs for v6.16-rc2
- Enable modular build of the SCTP network protocol (no longer auto-enabled since now commit |
||
![]() |
7164aacfce |
m68k: Replace __ASSEMBLY__ with __ASSEMBLER__ in non-uapi headers
While the GCC and Clang compilers already define __ASSEMBLER__ automatically when compiling assembly code, __ASSEMBLY__ is a macro that only gets defined by the Makefiles in the kernel. This can be very confusing when switching between userspace and kernelspace coding, or when dealing with uapi headers that rather should use __ASSEMBLER__ instead. So let's standardize on the __ASSEMBLER__ macro that is provided by the compilers now. This is almost a completely mechanical patch (done with a simple "sed -i" statement), with one comment tweaked manually in arch/m68k/include/asm/mac_baboon.h (which was missing underscores). Signed-off-by: Thomas Huth <thuth@redhat.com> Acked-by: Greg Ungerer <gerg@linux-m68k.org> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/20250611114056.118309-3-thuth@redhat.com Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> |
||
![]() |
16eea8d2d3 |
m68k: Replace __ASSEMBLY__ with __ASSEMBLER__ in uapi headers
__ASSEMBLY__ is only defined by the Makefile of the kernel, so this is not really useful for uapi headers (unless the userspace Makefile defines it, too). Let's switch to __ASSEMBLER__ which gets set automatically by the compiler when compiling assembly code. This is a completely mechanical patch (done with a simple "sed -i" statement). Signed-off-by: Thomas Huth <thuth@redhat.com> Acked-by: Greg Ungerer <gerg@linux-m68k.org> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/20250611114056.118309-2-thuth@redhat.com Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> |
||
![]() |
4fbdd56edf |
m68k: Enable dead code elimination
Allow the experimental dead code elimination config to be enabled. For my 68000 nommu config this frees up a few hundred K of memory so seems worth while. Boot and build tested on nommu and mmu enabled configs. Before: Memory: 5388K/8192K available (1986K kernel code, 114K rwdata, 244K rodata, 92K init, 41K bss, 2624K reserved, 0K cma-reserved) After Memory: 5684K/8192K available (1714K kernel code, 112K rwdata, 228K rodata, 92K init, 37K bss, 2328K reserved, 0K cma-reserved) Signed-off-by: Daniel Palmer <daniel@0x0f.com> Acked-by: Greg Ungerer <gerg@linux-m68k.org> Tested-by: Finn Thain <fthain@linux-m68k.org> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/20250416114240.2929832-1-daniel@0x0f.com Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> |
||
![]() |
83f672a7f6 |
m68k: Don't unregister boot console needlessly
When MACH_IS_MVME147, the boot console calls mvme147_scc_write() to
generate console output. That will continue to work even after
debug_cons_nputs() becomes unavailable so there's no need to
unregister the boot console.
Take the opportunity to remove a repeated MACH_IS_* test. Use the
actual .write method (instead of a wrapper) and test that pointer
instead. This means adding an unused parameter to debug_cons_nputs() for
consistency with the struct console API.
early_printk.c is only built when CONFIG_EARLY_PRINTK=y. As of late,
head.S is only built when CONFIG_MMU_MOTOROLA=y. So let the former symbol
depend on the latter, to obviate some ifdef conditionals.
Cc: Daniel Palmer <daniel@0x0f.com>
Fixes:
|
||
![]() |
e911044c28 |
m68k: Remove unused "cursor home" code from debug console
The cursor home operation is unused and seems undesirable for logging. Remove it. The console_not_cr label actually means "not line feed and not carriage return either" so take the opportunity to replace it with something less confusing. Rectify some inconsistent whitespace while we're here. Signed-off-by: Finn Thain <fthain@linux-m68k.org> Tested-by: Stan Johnson <userm57@yahoo.com> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/ec2d443d3c3213028bbbab7c2e0382cd53db75fe.1743115195.git.fthain@linux-m68k.org Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> |
||
![]() |
0da6458417 |
m68k: Avoid pointless recursion in debug console rendering
The recursive call to console_putc to effect a carriage return is needlessly slow and complicated. Instead, just clear the column counter directly. Setup %a0 earlier to avoid a repeated comparison. Signed-off-by: Finn Thain <fthain@linux-m68k.org> Tested-by: Stan Johnson <userm57@yahoo.com> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/a6104f41918bed4fd17f92c45df94ac7a5d30e40.1743115195.git.fthain@linux-m68k.org Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> |
||
![]() |
210a1ce8ed |
m68k: Fix lost column on framebuffer debug console
Move the cursor position rightward after rendering the character,
not before. This avoids complications that arise when the recursive
console_putc call has to wrap the line and/or scroll the display.
This also fixes the linewrap bug that crops off the rightmost column.
When the cursor is at the bottom of the display, a linefeed will not
move the cursor position further downward. Instead, the display scrolls
upward. Avoid the repeated add/subtract sequence by way of a single
subtraction at the initialization of console_struct_num_rows.
Fixes:
|
||
![]() |
fd72f265bb |
netfilter: conntrack: remove DCCP protocol support
The DCCP socket family has now been removed from this tree, see:
|
||
![]() |
be7efb2d20
|
fs: introduce file_getattr and file_setattr syscalls
Introduce file_getattr() and file_setattr() syscalls to manipulate inode extended attributes. The syscalls takes pair of file descriptor and pathname. Then it operates on inode opened accroding to openat() semantics. The struct file_attr is passed to obtain/change extended attributes. This is an alternative to FS_IOC_FSSETXATTR ioctl with a difference that file don't need to be open as we can reference it with a path instead of fd. By having this we can manipulated inode extended attributes not only on regular files but also on special ones. This is not possible with FS_IOC_FSSETXATTR ioctl as with special files we can not call ioctl() directly on the filesystem inode using fd. This patch adds two new syscalls which allows userspace to get/set extended inode attributes on special files by using parent directory and a path - *at() like syscall. CC: linux-api@vger.kernel.org CC: linux-fsdevel@vger.kernel.org CC: linux-xfs@vger.kernel.org Signed-off-by: Andrey Albershteyn <aalbersh@kernel.org> Link: https://lore.kernel.org/20250630-xattrat-syscall-v6-6-c4e3bc35227b@kernel.org Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
![]() |
8135422ae0 |
m68k: mm: Convert pointer table macros to use ptdescs
Motorola uses its pointer tables for page tables, so its macros should be using struct ptdesc, not struct page. This removes a user of page->lru. Signed-off-by: "Vishal Moola (Oracle)" <vishal.moola@gmail.com> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/20250611001255.527952-5-vishal.moola@gmail.com Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> |
||
![]() |
66aebe56de |
m68k: mm: Convert init_pointer_table() to use ptdescs
Motorola uses init_pointer_table() for page tables, so it should be using struct ptdesc, not struct page. This helps us prepare to allocate ptdescs as their own memory descriptor, and prepares to remove a user of page->lru. Signed-off-by: "Vishal Moola (Oracle)" <vishal.moola@gmail.com> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/20250611001255.527952-4-vishal.moola@gmail.com Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> |
||
![]() |
5bea64689d |
m68k: mm: Convert free_pointer_table() to use ptdescs
Motorola uses free_pointer_table() for page tables, so it should be using struct ptdesc, not struct page. This helps us prepare to allocate ptdescs as their own memory descriptor, and prepares to remove a user of page->lru. Signed-off-by: "Vishal Moola (Oracle)" <vishal.moola@gmail.com> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/20250611001255.527952-3-vishal.moola@gmail.com Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> |
||
![]() |
72fe6dafaa |
m68k: mm: Convert get_pointer_table() to use ptdescs
Motorola uses get_pointer_table() for page tables, so it should be using struct ptdesc, not struct page. This helps us prepare to allocate ptdescs as their own memory descriptor, and prepares to remove a user of page->lru. Signed-off-by: "Vishal Moola (Oracle)" <vishal.moola@gmail.com> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/20250611001255.527952-2-vishal.moola@gmail.com Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> |
||
![]() |
158647d94c |
m68k: remove unneeded tty includes
All these includes must have been cut & pasted. The code does not use any tty or vt functionality at all. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Joshua Thompson <funaho@jurai.org> Cc: linux-m68k@lists.linux-m68k.org Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20250611100319.186924-5-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
![]() |
403d1338a4 |
mm: pgtable: fix pte_swp_exclusive
Make pte_swp_exclusive return bool instead of int. This will better reflect how pte_swp_exclusive is actually used in the code. This fixes swap/swapoff problems on Alpha due pte_swp_exclusive not returning correct values when _PAGE_SWP_EXCLUSIVE bit resides in upper 32-bits of PTE (like on alpha). Suggested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Magnus Lindholm <linmag7@gmail.com> Cc: Sam James <sam@gentoo.org> Link: https://lore.kernel.org/lkml/20250218175735.19882-2-linmag7@gmail.com/ Link: https://lore.kernel.org/lkml/20250602041118.GA2675383@ZenIV/ [ Applied as the 'sed' script Al suggested - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
![]() |
8630c59e99 |
Kbuild updates for v6.16
- Add support for the EXPORT_SYMBOL_GPL_FOR_MODULES() macro, which exports a symbol only to specified modules - Improve ABI handling in gendwarfksyms - Forcibly link lib-y objects to vmlinux even if CONFIG_MODULES=n - Add checkers for redundant or missing <linux/export.h> inclusion - Deprecate the extra-y syntax - Fix a genksyms bug when including enum constants from *.symref files -----BEGIN PGP SIGNATURE----- iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAmhEZc4VHG1hc2FoaXJv eUBrZXJuZWwub3JnAAoJED2LAQed4NsGVAgQAKLRdBGga1kBJJFIkUOHWC5+g/je U/dO5rGnuOLviWDexC6QT8AQV2N+dQXhB11x+KacSu1bwowsEvwuegtA6VqwbETs tyWmB0PftEzVyPfc+Rjfy0LDfKkiKkm4RhXiMwcem/rlw45gvJXrVU7jJin9fI3A So8glpOAX+mEizUHkjZkS51nkYCZFDsn7hVo0X43vqjeFrrFGLEQ5xas4Ci+dkY3 9g8Q5bFL8CC5PHjSO8wFftCcAWwTukAht6CSSb522MKGnCVZ9RxTmRwEPXrBmXtS 5eWa8yg6y0tFVmot8iwZGBYleAWDNsj0a2j2oVjUN+EF91sk3WQApJVNBok/nQFb 4MgO3N3UXZdy4tYkBX8tMgOcGkfjZAFoNxSUm5oVouh9NyT0dpqYHhJHBNVbVJoF igQWeVOYcioDjeU1iXnP2cw64q44ROfxmOpDxOSRz9PTM6CCya1R0m/zzBLV6Lwk rzlXk1LLf+jIfgmS5RLlkCgrXS1U0vNGXxQH9Ui9dZSEtzdU7qt5WQ/Rz44bEBhS OeIlJfMMx6QYJztJc/BaUjkKsutTkII52QctRbRCj/nKswHd8SnHV+xk1c2WPxrg yKq10rPpdg1BcvmODY6cmcndt7ogDRfkogm2gvGQIBZEglRimpmpg51sZQRD0ueE 0rt12TmktsLbglB4 =Dy49 -----END PGP SIGNATURE----- Merge tag 'kbuild-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Add support for the EXPORT_SYMBOL_GPL_FOR_MODULES() macro, which exports a symbol only to specified modules - Improve ABI handling in gendwarfksyms - Forcibly link lib-y objects to vmlinux even if CONFIG_MODULES=n - Add checkers for redundant or missing <linux/export.h> inclusion - Deprecate the extra-y syntax - Fix a genksyms bug when including enum constants from *.symref files * tag 'kbuild-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (28 commits) genksyms: Fix enum consts from a reference affecting new values arch: use always-$(KBUILD_BUILTIN) for vmlinux.lds kbuild: set y instead of 1 to KBUILD_{BUILTIN,MODULES} efi/libstub: use 'targets' instead of extra-y in Makefile module: make __mod_device_table__* symbols static scripts/misc-check: check unnecessary #include <linux/export.h> when W=1 scripts/misc-check: check missing #include <linux/export.h> when W=1 scripts/misc-check: add double-quotes to satisfy shellcheck kbuild: move W=1 check for scripts/misc-check to top-level Makefile scripts/tags.sh: allow to use alternative ctags implementation kconfig: introduce menu type enum docs: symbol-namespaces: fix reST warning with literal block kbuild: link lib-y objects to vmlinux forcibly even when CONFIG_MODULES=n tinyconfig: enable CONFIG_LD_DEAD_CODE_DATA_ELIMINATION docs/core-api/symbol-namespaces: drop table of contents and section numbering modpost: check forbidden MODULE_IMPORT_NS("module:") at compile time kbuild: move kbuild syntax processing to scripts/Makefile.build Makefile: remove dependency on archscripts for header installation Documentation/kbuild: Add new gendwarfksyms kABI rules Documentation/kbuild: Drop section numbers ... |
||
![]() |
e21efe833e |
arch: use always-$(KBUILD_BUILTIN) for vmlinux.lds
The extra-y syntax is deprecated. Instead, use always-$(KBUILD_BUILTIN), which behaves equivalently. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Nicolas Schier <n.schier@avm.de> |
||
![]() |
fd1f847350 |
- The 2 patch series "zram: support algorithm-specific parameters" from
Sergey Senozhatsky adds infrastructure for passing algorithm-specific parameters into zram. A single parameter `winbits' is implemented at this time. - The 5 patch series "memcg: nmi-safe kmem charging" from Shakeel Butt makes memcg charging nmi-safe, which is required by BFP, which can operate in NMI context. - The 5 patch series "Some random fixes and cleanup to shmem" from Kemeng Shi implements small fixes and cleanups in the shmem code. - The 2 patch series "Skip mm selftests instead when kernel features are not present" from Zi Yan fixes some issues in the MM selftest code. - The 2 patch series "mm/damon: build-enable essential DAMON components by default" from SeongJae Park reworks DAMON Kconfig to make it easier to enable CONFIG_DAMON. - The 2 patch series "sched/numa: add statistics of numa balance task migration" from Libo Chen adds more info into sysfs and procfs files to improve visibility into the NUMA balancer's task migration activity. - The 4 patch series "selftests/mm: cow and gup_longterm cleanups" from Mark Brown provides various updates to some of the MM selftests to make them play better with the overall containing framework. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaDzA9wAKCRDdBJ7gKXxA js8sAP9V3COg+vzTmimzP3ocTkkbbIJzDfM6nXpE2EQ4BR3ejwD+NsIT2ZLtTF6O LqAZpgO7ju6wMjR/lM30ebCq5qFbZAw= =oruw -----END PGP SIGNATURE----- Merge tag 'mm-stable-2025-06-01-14-06' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull more MM updates from Andrew Morton: - "zram: support algorithm-specific parameters" from Sergey Senozhatsky adds infrastructure for passing algorithm-specific parameters into zram. A single parameter `winbits' is implemented at this time. - "memcg: nmi-safe kmem charging" from Shakeel Butt makes memcg charging nmi-safe, which is required by BFP, which can operate in NMI context. - "Some random fixes and cleanup to shmem" from Kemeng Shi implements small fixes and cleanups in the shmem code. - "Skip mm selftests instead when kernel features are not present" from Zi Yan fixes some issues in the MM selftest code. - "mm/damon: build-enable essential DAMON components by default" from SeongJae Park reworks DAMON Kconfig to make it easier to enable CONFIG_DAMON. - "sched/numa: add statistics of numa balance task migration" from Libo Chen adds more info into sysfs and procfs files to improve visibility into the NUMA balancer's task migration activity. - "selftests/mm: cow and gup_longterm cleanups" from Mark Brown provides various updates to some of the MM selftests to make them play better with the overall containing framework. * tag 'mm-stable-2025-06-01-14-06' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (43 commits) mm/khugepaged: clean up refcount check using folio_expected_ref_count() selftests/mm: fix test result reporting in gup_longterm selftests/mm: report unique test names for each cow test selftests/mm: add helper for logging test start and results selftests/mm: use standard ksft_finished() in cow and gup_longterm selftests/damon/_damon_sysfs: skip testcases if CONFIG_DAMON_SYSFS is disabled sched/numa: add statistics of numa balance task sched/numa: fix task swap by skipping kernel threads tools/testing: check correct variable in open_procmap() tools/testing/vma: add missing function stub mm/gup: update comment explaining why gup_fast() disables IRQs selftests/mm: two fixes for the pfnmap test mm/khugepaged: fix race with folio split/free using temporary reference mm: add CONFIG_PAGE_BLOCK_ORDER to select page block order mmu_notifiers: remove leftover stub macros selftests/mm: deduplicate test names in madv_populate kcov: rust: add flags for KCOV with Rust mm: rust: make CONFIG_MMU ifdefs more narrow mmu_gather: move tlb flush for VM_PFNMAP/VM_MIXEDMAP vmas into free_pgtables() mm/damon/Kconfig: enable CONFIG_DAMON by default ... |
||
![]() |
df7b9b4f6b |
m68knommu: updates and fixes for v6.16
. use new gpio line value settings . use strscpy() more -----BEGIN PGP SIGNATURE----- iQJEBAABCgAuFiEEmsfM6tQwfNjBOxr3TiQVqaG9L4AFAmg8z4gQHGdlcmdAa2Vy bmVsLm9yZwAKCRBOJBWpob0vgONVEACgRI4DtxohIRcXKWn4JDCjFpJM/CuSaeip 9BValWy5PmxTTey1H26mQUfur6rLNrBV4JbcB1d+dVwOuXumy+r4fflpvgmbvnQn fnw7ikC6O/9b1GZukwLQ6vnmYm/8f20afgQONwgmm+mOwjzKyA05uv0FBASrdvmH TVO+zvX/TFbA4l0926Q4XNSrNGX0Ud8ZvT+p3ZXGF5foePPX8B36RufC4gu/tPLe ocgKUzMjuzyb9520FiahXYoK7AMe2oEKmzeeRZPK0wnOxG6j4sISTSLVHcj5zxw8 oY1lQmdnofH1A2LSjP7a2HJkhoEkLdM/aPRwCuPLH/L9HwwGaierKO+6v6/d6O1R kQ4Thvtr2rleXXaXYyDirjYSSqljX8qFAiriT0Dqod+XhGvrfRgoPD4XSzwmhoxK qcyZ4AvRP0MPCfba2/QFIPCaSDufZDMPSPhs7A9iOg+1zThcqpZgrIU0wDWi1rMH vJ5bzFpA/Rs7JrSR4sfBph3WwjS/YtUg+fj3cGSDipC+6WTYUVB2HapNqwPa9Xet vNLHI0Z9HM74SFqi0ZCjZhUrDJpEl7d51WNIkKLIr2q6/OuoAAcEPVDejoGkNvns WMKc7DwHp21cyPjkcU2w7IcP+P+5+9je+jtFJzyzZMjgPpEUpI3BuS7wR7F4JA2J SeNRAQnJ0w== =NsaM -----END PGP SIGNATURE----- Merge tag 'm68knommu-for-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu Pull m68knommu updates from Greg Ungerer: - use new gpio line value settings - use strscpy() more * tag 'm68knommu-for-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68k: Replace memcpy() + manual NUL-termination with strscpy() m68k/kernel: replace strncpy() with strscpy() m68k: coldfire: gpio: use new line value setter callbacks |
||
![]() |
e94715982c |
m68k: remove use of page->index
Switch to using struct ptdesc to store the markbits which will allow us to remove index from struct page. Link: https://lkml.kernel.org/r/20250516151332.3705351-1-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
00c010e130 |
- The 11 patch series "Add folio_mk_pte()" from Matthew Wilcox
simplifies the act of creating a pte which addresses the first page in a folio and reduces the amount of plumbing which architecture must implement to provide this. - The 8 patch series "Misc folio patches for 6.16" from Matthew Wilcox is a shower of largely unrelated folio infrastructure changes which clean things up and better prepare us for future work. - The 3 patch series "memory,x86,acpi: hotplug memory alignment advisement" from Gregory Price adds early-init code to prevent x86 from leaving physical memory unused when physical address regions are not aligned to memory block size. - The 2 patch series "mm/compaction: allow more aggressive proactive compaction" from Michal Clapinski provides some tuning of the (sadly, hard-coded (more sadly, not auto-tuned)) thresholds for our invokation of proactive compaction. In a simple test case, the reduction of a guest VM's memory consumption was dramatic. - The 8 patch series "Minor cleanups and improvements to swap freeing code" from Kemeng Shi provides some code cleaups and a small efficiency improvement to this part of our swap handling code. - The 6 patch series "ptrace: introduce PTRACE_SET_SYSCALL_INFO API" from Dmitry Levin adds the ability for a ptracer to modify syscalls arguments. At this time we can alter only "system call information that are used by strace system call tampering, namely, syscall number, syscall arguments, and syscall return value. This series should have been incorporated into mm.git's "non-MM" branch, but I goofed. - The 3 patch series "fs/proc: extend the PAGEMAP_SCAN ioctl to report guard regions" from Andrei Vagin extends the info returned by the PAGEMAP_SCAN ioctl against /proc/pid/pagemap. This permits CRIU to more efficiently get at the info about guard regions. - The 2 patch series "Fix parameter passed to page_mapcount_is_type()" from Gavin Shan implements that fix. No runtime effect is expected because validate_page_before_insert() happens to fix up this error. - The 3 patch series "kernel/events/uprobes: uprobe_write_opcode() rewrite" from David Hildenbrand basically brings uprobe text poking into the current decade. Remove a bunch of hand-rolled implementation in favor of using more current facilities. - The 3 patch series "mm/ptdump: Drop assumption that pxd_val() is u64" from Anshuman Khandual provides enhancements and generalizations to the pte dumping code. This might be needed when 128-bit Page Table Descriptors are enabled for ARM. - The 12 patch series "Always call constructor for kernel page tables" from Kevin Brodsky "ensures that the ctor/dtor is always called for kernel pgtables, as it already is for user pgtables". This permits the addition of more functionality such as "insert hooks to protect page tables". This change does result in various architectures performing unnecesary work, but this is fixed up where it is anticipated to occur. - The 9 patch series "Rust support for mm_struct, vm_area_struct, and mmap" from Alice Ryhl adds plumbing to permit Rust access to core MM structures. - The 3 patch series "fix incorrectly disallowed anonymous VMA merges" from Lorenzo Stoakes takes advantage of some VMA merging opportunities which we've been missing for 15 years. - The 4 patch series "mm/madvise: batch tlb flushes for MADV_DONTNEED and MADV_FREE" from SeongJae Park optimizes process_madvise()'s TLB flushing. Instead of flushing each address range in the provided iovec, we batch the flushing across all the iovec entries. The syscall's cost was approximately halved with a microbenchmark which was designed to load this particular operation. - The 6 patch series "Track node vacancy to reduce worst case allocation counts" from Sidhartha Kumar makes the maple tree smarter about its node preallocation. stress-ng mmap performance increased by single-digit percentages and the amount of unnecessarily preallocated memory was dramaticelly reduced. - The 3 patch series "mm/gup: Minor fix, cleanup and improvements" from Baoquan He removes a few unnecessary things which Baoquan noted when reading the code. - The 3 patch series ""Enhance sysfs handling for memory hotplug in weighted interleave" from Rakie Kim "enhances the weighted interleave policy in the memory management subsystem by improving sysfs handling, fixing memory leaks, and introducing dynamic sysfs updates for memory hotplug support". Fixes things on error paths which we are unlikely to hit. - The 7 patch series "mm/damon: auto-tune DAMOS for NUMA setups including tiered memory" from SeongJae Park introduces new DAMOS quota goal metrics which eliminate the manual tuning which is required when utilizing DAMON for memory tiering. - The 5 patch series "mm/vmalloc.c: code cleanup and improvements" from Baoquan He provides cleanups and small efficiency improvements which Baoquan found via code inspection. - The 2 patch series "vmscan: enforce mems_effective during demotion" from Gregory Price "changes reclaim to respect cpuset.mems_effective during demotion when possible". because "presently, reclaim explicitly ignores cpuset.mems_effective when demoting, which may cause the cpuset settings to violated." "This is useful for isolating workloads on a multi-tenant system from certain classes of memory more consistently." - The 2 patch series ""Clean up split_huge_pmd_locked() and remove unnecessary folio pointers" from Gavin Guo provides minor cleanups and efficiency gains in in the huge page splitting and migrating code. - The 3 patch series "Use kmem_cache for memcg alloc" from Huan Yang creates a slab cache for `struct mem_cgroup', yielding improved memory utilization. - The 4 patch series "add max arg to swappiness in memory.reclaim and lru_gen" from Zhongkun He adds a new "max" argument to the "swappiness=" argument for memory.reclaim MGLRU's lru_gen. This directs proactive reclaim to reclaim from only anon folios rather than file-backed folios. - The 17 patch series "kexec: introduce Kexec HandOver (KHO)" from Mike Rapoport is the first step on the path to permitting the kernel to maintain existing VMs while replacing the host kernel via file-based kexec. At this time only memblock's reserve_mem is preserved. - The 7 patch series "mm: Introduce for_each_valid_pfn()" from David Woodhouse provides and uses a smarter way of looping over a pfn range. By skipping ranges of invalid pfns. - The 2 patch series "sched/numa: Skip VMA scanning on memory pinned to one NUMA node via cpuset.mems" from Libo Chen removes a lot of pointless VMA scanning when a task is pinned a single NUMA mode. Dramatic performance benefits were seen in some real world cases. - The 2 patch series "JFS: Implement migrate_folio for jfs_metapage_aops" from Shivank Garg addresses a warning which occurs during memory compaction when using JFS. - The 4 patch series "move all VMA allocation, freeing and duplication logic to mm" from Lorenzo Stoakes moves some VMA code from kernel/fork.c into the more appropriate mm/vma.c. - The 6 patch series "mm, swap: clean up swap cache mapping helper" from Kairui Song provides code consolidation and cleanups related to the folio_index() function. - The 2 patch series "mm/gup: Cleanup memfd_pin_folios()" from Vishal Moola does that. - The 8 patch series "memcg: Fix test_memcg_min/low test failures" from Waiman Long addresses some bogus failures which are being reported by the test_memcontrol selftest. - The 3 patch series "eliminate mmap() retry merge, add .mmap_prepare hook" from Lorenzo Stoakes commences the deprecation of file_operations.mmap() in favor of the new file_operations.mmap_prepare(). The latter is more restrictive and prevents drivers from messing with things in ways which, amongst other problems, may defeat VMA merging. - The 4 patch series "memcg: decouple memcg and objcg stocks"" from Shakeel Butt decouples the per-cpu memcg charge cache from the objcg's one. This is a step along the way to making memcg and objcg charging NMI-safe, which is a BPF requirement. - The 6 patch series "mm/damon: minor fixups and improvements for code, tests, and documents" from SeongJae Park is "yet another batch of miscellaneous DAMON changes. Fix and improve minor problems in code, tests and documents." - The 7 patch series "memcg: make memcg stats irq safe" from Shakeel Butt converts memcg stats to be irq safe. Another step along the way to making memcg charging and stats updates NMI-safe, a BPF requirement. - The 4 patch series "Let unmap_hugepage_range() and several related functions take folio instead of page" from Fan Ni provides folio conversions in the hugetlb code. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaDt5qgAKCRDdBJ7gKXxA ju6XAP9nTiSfRz8Cz1n5LJZpFKEGzLpSihCYyR6P3o1L9oe3mwEAlZ5+XAwk2I5x Qqb/UGMEpilyre1PayQqOnct3aSL9Ao= =tYYm -----END PGP SIGNATURE----- Merge tag 'mm-stable-2025-05-31-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - "Add folio_mk_pte()" from Matthew Wilcox simplifies the act of creating a pte which addresses the first page in a folio and reduces the amount of plumbing which architecture must implement to provide this. - "Misc folio patches for 6.16" from Matthew Wilcox is a shower of largely unrelated folio infrastructure changes which clean things up and better prepare us for future work. - "memory,x86,acpi: hotplug memory alignment advisement" from Gregory Price adds early-init code to prevent x86 from leaving physical memory unused when physical address regions are not aligned to memory block size. - "mm/compaction: allow more aggressive proactive compaction" from Michal Clapinski provides some tuning of the (sadly, hard-coded (more sadly, not auto-tuned)) thresholds for our invokation of proactive compaction. In a simple test case, the reduction of a guest VM's memory consumption was dramatic. - "Minor cleanups and improvements to swap freeing code" from Kemeng Shi provides some code cleaups and a small efficiency improvement to this part of our swap handling code. - "ptrace: introduce PTRACE_SET_SYSCALL_INFO API" from Dmitry Levin adds the ability for a ptracer to modify syscalls arguments. At this time we can alter only "system call information that are used by strace system call tampering, namely, syscall number, syscall arguments, and syscall return value. This series should have been incorporated into mm.git's "non-MM" branch, but I goofed. - "fs/proc: extend the PAGEMAP_SCAN ioctl to report guard regions" from Andrei Vagin extends the info returned by the PAGEMAP_SCAN ioctl against /proc/pid/pagemap. This permits CRIU to more efficiently get at the info about guard regions. - "Fix parameter passed to page_mapcount_is_type()" from Gavin Shan implements that fix. No runtime effect is expected because validate_page_before_insert() happens to fix up this error. - "kernel/events/uprobes: uprobe_write_opcode() rewrite" from David Hildenbrand basically brings uprobe text poking into the current decade. Remove a bunch of hand-rolled implementation in favor of using more current facilities. - "mm/ptdump: Drop assumption that pxd_val() is u64" from Anshuman Khandual provides enhancements and generalizations to the pte dumping code. This might be needed when 128-bit Page Table Descriptors are enabled for ARM. - "Always call constructor for kernel page tables" from Kevin Brodsky ensures that the ctor/dtor is always called for kernel pgtables, as it already is for user pgtables. This permits the addition of more functionality such as "insert hooks to protect page tables". This change does result in various architectures performing unnecesary work, but this is fixed up where it is anticipated to occur. - "Rust support for mm_struct, vm_area_struct, and mmap" from Alice Ryhl adds plumbing to permit Rust access to core MM structures. - "fix incorrectly disallowed anonymous VMA merges" from Lorenzo Stoakes takes advantage of some VMA merging opportunities which we've been missing for 15 years. - "mm/madvise: batch tlb flushes for MADV_DONTNEED and MADV_FREE" from SeongJae Park optimizes process_madvise()'s TLB flushing. Instead of flushing each address range in the provided iovec, we batch the flushing across all the iovec entries. The syscall's cost was approximately halved with a microbenchmark which was designed to load this particular operation. - "Track node vacancy to reduce worst case allocation counts" from Sidhartha Kumar makes the maple tree smarter about its node preallocation. stress-ng mmap performance increased by single-digit percentages and the amount of unnecessarily preallocated memory was dramaticelly reduced. - "mm/gup: Minor fix, cleanup and improvements" from Baoquan He removes a few unnecessary things which Baoquan noted when reading the code. - ""Enhance sysfs handling for memory hotplug in weighted interleave" from Rakie Kim "enhances the weighted interleave policy in the memory management subsystem by improving sysfs handling, fixing memory leaks, and introducing dynamic sysfs updates for memory hotplug support". Fixes things on error paths which we are unlikely to hit. - "mm/damon: auto-tune DAMOS for NUMA setups including tiered memory" from SeongJae Park introduces new DAMOS quota goal metrics which eliminate the manual tuning which is required when utilizing DAMON for memory tiering. - "mm/vmalloc.c: code cleanup and improvements" from Baoquan He provides cleanups and small efficiency improvements which Baoquan found via code inspection. - "vmscan: enforce mems_effective during demotion" from Gregory Price changes reclaim to respect cpuset.mems_effective during demotion when possible. because presently, reclaim explicitly ignores cpuset.mems_effective when demoting, which may cause the cpuset settings to violated. This is useful for isolating workloads on a multi-tenant system from certain classes of memory more consistently. - "Clean up split_huge_pmd_locked() and remove unnecessary folio pointers" from Gavin Guo provides minor cleanups and efficiency gains in in the huge page splitting and migrating code. - "Use kmem_cache for memcg alloc" from Huan Yang creates a slab cache for `struct mem_cgroup', yielding improved memory utilization. - "add max arg to swappiness in memory.reclaim and lru_gen" from Zhongkun He adds a new "max" argument to the "swappiness=" argument for memory.reclaim MGLRU's lru_gen. This directs proactive reclaim to reclaim from only anon folios rather than file-backed folios. - "kexec: introduce Kexec HandOver (KHO)" from Mike Rapoport is the first step on the path to permitting the kernel to maintain existing VMs while replacing the host kernel via file-based kexec. At this time only memblock's reserve_mem is preserved. - "mm: Introduce for_each_valid_pfn()" from David Woodhouse provides and uses a smarter way of looping over a pfn range. By skipping ranges of invalid pfns. - "sched/numa: Skip VMA scanning on memory pinned to one NUMA node via cpuset.mems" from Libo Chen removes a lot of pointless VMA scanning when a task is pinned a single NUMA mode. Dramatic performance benefits were seen in some real world cases. - "JFS: Implement migrate_folio for jfs_metapage_aops" from Shivank Garg addresses a warning which occurs during memory compaction when using JFS. - "move all VMA allocation, freeing and duplication logic to mm" from Lorenzo Stoakes moves some VMA code from kernel/fork.c into the more appropriate mm/vma.c. - "mm, swap: clean up swap cache mapping helper" from Kairui Song provides code consolidation and cleanups related to the folio_index() function. - "mm/gup: Cleanup memfd_pin_folios()" from Vishal Moola does that. - "memcg: Fix test_memcg_min/low test failures" from Waiman Long addresses some bogus failures which are being reported by the test_memcontrol selftest. - "eliminate mmap() retry merge, add .mmap_prepare hook" from Lorenzo Stoakes commences the deprecation of file_operations.mmap() in favor of the new file_operations.mmap_prepare(). The latter is more restrictive and prevents drivers from messing with things in ways which, amongst other problems, may defeat VMA merging. - "memcg: decouple memcg and objcg stocks"" from Shakeel Butt decouples the per-cpu memcg charge cache from the objcg's one. This is a step along the way to making memcg and objcg charging NMI-safe, which is a BPF requirement. - "mm/damon: minor fixups and improvements for code, tests, and documents" from SeongJae Park is yet another batch of miscellaneous DAMON changes. Fix and improve minor problems in code, tests and documents. - "memcg: make memcg stats irq safe" from Shakeel Butt converts memcg stats to be irq safe. Another step along the way to making memcg charging and stats updates NMI-safe, a BPF requirement. - "Let unmap_hugepage_range() and several related functions take folio instead of page" from Fan Ni provides folio conversions in the hugetlb code. * tag 'mm-stable-2025-05-31-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (285 commits) mm: pcp: increase pcp->free_count threshold to trigger free_high mm/hugetlb: convert use of struct page to folio in __unmap_hugepage_range() mm/hugetlb: refactor __unmap_hugepage_range() to take folio instead of page mm/hugetlb: refactor unmap_hugepage_range() to take folio instead of page mm/hugetlb: pass folio instead of page to unmap_ref_private() memcg: objcg stock trylock without irq disabling memcg: no stock lock for cpu hot-unplug memcg: make __mod_memcg_lruvec_state re-entrant safe against irqs memcg: make count_memcg_events re-entrant safe against irqs memcg: make mod_memcg_state re-entrant safe against irqs memcg: move preempt disable to callers of memcg_rstat_updated memcg: memcg_rstat_updated re-entrant safe against irqs mm: khugepaged: decouple SHMEM and file folios' collapse selftests/eventfd: correct test name and improve messages alloc_tag: check mem_profiling_support in alloc_tag_init Docs/damon: update titles and brief introductions to explain DAMOS selftests/damon/_damon_sysfs: read tried regions directories in order mm/damon/tests/core-kunit: add a test for damos_set_filters_default_reject() mm/damon/paddr: remove unused variable, folio_list, in damon_pa_stat() mm/damon/sysfs-schemes: fix wrong comment on damons_sysfs_quota_goal_metric_strs ... |
||
![]() |
1b98f357da |
Networking changes for 6.16.
Core ---- - Implement the Device Memory TCP transmit path, allowing zero-copy data transmission on top of TCP from e.g. GPU memory to the wire. - Move all the IPv6 routing tables management outside the RTNL scope, under its own lock and RCU. The route control path is now 3x times faster. - Convert queue related netlink ops to instance lock, reducing again the scope of the RTNL lock. This improves the control plane scalability. - Refactor the software crc32c implementation, removing unneeded abstraction layers and improving significantly the related micro-benchmarks. - Optimize the GRO engine for UDP-tunneled traffic, for a 10% performance improvement in related stream tests. - Cover more per-CPU storage with local nested BH locking; this is a prep work to remove the current per-CPU lock in local_bh_disable() on PREMPT_RT. - Introduce and use nlmsg_payload helper, combining buffer bounds verification with accessing payload carried by netlink messages. Netfilter --------- - Rewrite the procfs conntrack table implementation, improving considerably the dump performance. A lot of user-space tools still use this interface. - Implement support for wildcard netdevice in netdev basechain and flowtables. - Integrate conntrack information into nft trace infrastructure. - Export set count and backend name to userspace, for better introspection. BPF --- - BPF qdisc support: BPF-qdisc can be implemented with BPF struct_ops programs and can be controlled in similar way to traditional qdiscs using the "tc qdisc" command. - Refactor the UDP socket iterator, addressing long standing issues WRT duplicate hits or missed sockets. Protocols --------- - Improve TCP receive buffer auto-tuning and increase the default upper bound for the receive buffer; overall this improves the single flow maximum thoughput on 200Gbs link by over 60%. - Add AFS GSSAPI security class to AF_RXRPC; it provides transport security for connections to the AFS fileserver and VL server. - Improve TCP multipath routing, so that the sources address always matches the nexthop device. - Introduce SO_PASSRIGHTS for AF_UNIX, to allow disabling SCM_RIGHTS, and thus preventing DoS caused by passing around problematic FDs. - Retire DCCP socket. DCCP only receives updates for bugs, and major distros disable it by default. Its removal allows for better organisation of TCP fields to reduce the number of cache lines hit in the fast path. - Extend TCP drop-reason support to cover PAWS checks. Driver API ---------- - Reorganize PTP ioctl flag support to require an explicit opt-in for the drivers, avoiding the problem of drivers not rejecting new unsupported flags. - Converted several device drivers to timestamping APIs. - Introduce per-PHY ethtool dump helpers, improving the support for dump operations targeting PHYs. Tests and tooling ----------------- - Add support for classic netlink in user space C codegen, so that ynl-c can now read, create and modify links, routes addresses and qdisc layer configuration. - Add ynl sub-types for binary attributes, allowing ynl-c to output known struct instead of raw binary data, clarifying the classic netlink output. - Extend MPTCP selftests to improve the code-coverage. - Add tests for XDP tail adjustment in AF_XDP. New hardware / drivers ---------------------- - OpenVPN virtual driver: offload OpenVPN data channels processing to the kernel-space, increasing the data transfer throughput WRT the user-space implementation. - Renesas glue driver for the gigabit ethernet RZ/V2H(P) SoC. - Broadcom asp-v3.0 ethernet driver. - AMD Renoir ethernet device. - ReakTek MT9888 2.5G ethernet PHY driver. - Aeonsemi 10G C45 PHYs driver. Drivers ------- - Ethernet high-speed NICs: - nVidia/Mellanox (mlx5): - refactor the stearing table handling to reduce significantly the amount of memory used - add support for complex matches in H/W flow steering - improve flow streeing error handling - convert to netdev instance locking - Intel (100G, ice, igb, ixgbe, idpf): - ice: add switchdev support for LLDP traffic over VF - ixgbe: add firmware manipulation and regions devlink support - igb: introduce support for frame transmission premption - igb: adds persistent NAPI configuration - idpf: introduce RDMA support - idpf: add initial PTP support - Meta (fbnic): - extend hardware stats coverage - add devlink dev flash support - Broadcom (bnxt): - add support for RX-side device memory TCP - Wangxun (txgbe): - implement support for udp tunnel offload - complete PTP and SRIOV support for AML 25G/10G devices - Ethernet NICs embedded and virtual: - Google (gve): - add device memory TCP TX support - Amazon (ena): - support persistent per-NAPI config - Airoha: - add H/W support for L2 traffic offload - add per flow stats for flow offloading - RealTek (rtl8211): add support for WoL magic packet - Synopsys (stmmac): - dwmac-socfpga 1000BaseX support - add Loongson-2K3000 support - introduce support for hardware-accelerated VLAN stripping - Broadcom (bcmgenet): - expose more H/W stats - Freescale (enetc, dpaa2-eth): - enetc: add MAC filter, VLAN filter RSS and loopback support - dpaa2-eth: convert to H/W timestamping APIs - vxlan: convert FDB table to rhashtable, for better scalabilty - veth: apply qdisc backpressure on full ring to reduce TX drops - Ethernet switches: - Microchip (kzZ88x3): add ETS scheduler support - Ethernet PHYs: - RealTek (rtl8211): - add support for WoL magic packet - add support for PHY LEDs - CAN: - Adds RZ/G3E CANFD support to the rcar_canfd driver. - Preparatory work for CAN-XL support. - Add self-tests framework with support for CAN physical interfaces. - WiFi: - mac80211: - scan improvements with multi-link operation (MLO) - Qualcomm (ath12k): - enable AHB support for IPQ5332 - add monitor interface support to QCN9274 - add multi-link operation support to WCN7850 - add 802.11d scan offload support to WCN7850 - monitor mode for WCN7850, better 6 GHz regulatory - Qualcomm (ath11k): - restore hibernation support - MediaTek (mt76): - WiFi-7 improvements - implement support for mt7990 - Intel (iwlwifi): - enhanced multi-link single-radio (EMLSR) support on 5 GHz links - rework device configuration - RealTek (rtw88): - improve throughput for RTL8814AU - RealTek (rtw89): - add multi-link operation support - STA/P2P concurrency improvements - support different SAR configs by antenna - Bluetooth: - introduce HCI Driver protocol - btintel_pcie: do not generate coredump for diagnostic events - btusb: add HCI Drv commands for configuring altsetting - btusb: add RTL8851BE device 0x0bda:0xb850 - btusb: add new VID/PID 13d3/3584 for MT7922 - btusb: add new VID/PID 13d3/3630 and 13d3/3613 for MT7925 - btnxpuart: implement host-wakeup feature Signed-off-by: Paolo Abeni <pabeni@redhat.com> -----BEGIN PGP SIGNATURE----- iQJGBAABCAAwFiEEg1AjqC77wbdLX2LbKSR5jcyPE6QFAmg3D64SHHBhYmVuaUBy ZWRoYXQuY29tAAoJECkkeY3MjxOkcIsQAK2eEc+BxQer975wzvtMg6gF9eoex4a+ rZ7jxfDzDtNvTauoQsrpehDZp0FnySaVGCU36lHGB2OvDnhCpPc5hXzKDWQpOuqQ SHrGG3/6FTbdTG/HfHUcbNyrUzIf53SADSObiQ3qg4gyEQ3sCpcOKtVtMcU8rvsY /HqMnsJWFaROUMjMtCcnUSgjmeY9kBvha3sTXUqgeRugEOCvZD7z4rpqFIcQqHw7 e2Fi8dwIXEYNxqPp6MRq2qdyUTewCRruE8ZIMAFuhtfYeMElUZMPlqlMENX3AzTQ cr0EgwcFOUxRA7oZRxhoBNBsVXavtSpQr4ZDoWplxP4aQ37n5tc1E9Q72axpB/Og FbJRl6GvWYnCd8071BczgmfHlKaTAigPvt2Z4r6JjM5I/Bij/IZ3k+On1OTuOAj/ EqfFkdZ0a5cfKrwUMP+oSGtSAywkMVUtnIKJlZeRbjSj2432sCfe2jVAlS8ELM43 3LUgXYrAKtA87g171LlsRu5EEpI5QmqPb+i5LpPlEXe2TJEgPisyfecJ3NafF/2+ j575lm+TFNm9NTNhGGjDPEvw0djI5wSGGMe9J4gC74eWi6s5t6C4cuUf84TKWdwR x+9H0IB7rfFncAwXHJuUUtzd+fPHaYzs5dDGbSgMQOXr1cr1wlubCK8mQ1r/Wt/a 3GjFIOQKW2Q5 =t/Tz -----END PGP SIGNATURE----- Merge tag 'net-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Paolo Abeni: "Core: - Implement the Device Memory TCP transmit path, allowing zero-copy data transmission on top of TCP from e.g. GPU memory to the wire. - Move all the IPv6 routing tables management outside the RTNL scope, under its own lock and RCU. The route control path is now 3x times faster. - Convert queue related netlink ops to instance lock, reducing again the scope of the RTNL lock. This improves the control plane scalability. - Refactor the software crc32c implementation, removing unneeded abstraction layers and improving significantly the related micro-benchmarks. - Optimize the GRO engine for UDP-tunneled traffic, for a 10% performance improvement in related stream tests. - Cover more per-CPU storage with local nested BH locking; this is a prep work to remove the current per-CPU lock in local_bh_disable() on PREMPT_RT. - Introduce and use nlmsg_payload helper, combining buffer bounds verification with accessing payload carried by netlink messages. Netfilter: - Rewrite the procfs conntrack table implementation, improving considerably the dump performance. A lot of user-space tools still use this interface. - Implement support for wildcard netdevice in netdev basechain and flowtables. - Integrate conntrack information into nft trace infrastructure. - Export set count and backend name to userspace, for better introspection. BPF: - BPF qdisc support: BPF-qdisc can be implemented with BPF struct_ops programs and can be controlled in similar way to traditional qdiscs using the "tc qdisc" command. - Refactor the UDP socket iterator, addressing long standing issues WRT duplicate hits or missed sockets. Protocols: - Improve TCP receive buffer auto-tuning and increase the default upper bound for the receive buffer; overall this improves the single flow maximum thoughput on 200Gbs link by over 60%. - Add AFS GSSAPI security class to AF_RXRPC; it provides transport security for connections to the AFS fileserver and VL server. - Improve TCP multipath routing, so that the sources address always matches the nexthop device. - Introduce SO_PASSRIGHTS for AF_UNIX, to allow disabling SCM_RIGHTS, and thus preventing DoS caused by passing around problematic FDs. - Retire DCCP socket. DCCP only receives updates for bugs, and major distros disable it by default. Its removal allows for better organisation of TCP fields to reduce the number of cache lines hit in the fast path. - Extend TCP drop-reason support to cover PAWS checks. Driver API: - Reorganize PTP ioctl flag support to require an explicit opt-in for the drivers, avoiding the problem of drivers not rejecting new unsupported flags. - Converted several device drivers to timestamping APIs. - Introduce per-PHY ethtool dump helpers, improving the support for dump operations targeting PHYs. Tests and tooling: - Add support for classic netlink in user space C codegen, so that ynl-c can now read, create and modify links, routes addresses and qdisc layer configuration. - Add ynl sub-types for binary attributes, allowing ynl-c to output known struct instead of raw binary data, clarifying the classic netlink output. - Extend MPTCP selftests to improve the code-coverage. - Add tests for XDP tail adjustment in AF_XDP. New hardware / drivers: - OpenVPN virtual driver: offload OpenVPN data channels processing to the kernel-space, increasing the data transfer throughput WRT the user-space implementation. - Renesas glue driver for the gigabit ethernet RZ/V2H(P) SoC. - Broadcom asp-v3.0 ethernet driver. - AMD Renoir ethernet device. - ReakTek MT9888 2.5G ethernet PHY driver. - Aeonsemi 10G C45 PHYs driver. Drivers: - Ethernet high-speed NICs: - nVidia/Mellanox (mlx5): - refactor the steering table handling to significantly reduce the amount of memory used - add support for complex matches in H/W flow steering - improve flow streeing error handling - convert to netdev instance locking - Intel (100G, ice, igb, ixgbe, idpf): - ice: add switchdev support for LLDP traffic over VF - ixgbe: add firmware manipulation and regions devlink support - igb: introduce support for frame transmission premption - igb: adds persistent NAPI configuration - idpf: introduce RDMA support - idpf: add initial PTP support - Meta (fbnic): - extend hardware stats coverage - add devlink dev flash support - Broadcom (bnxt): - add support for RX-side device memory TCP - Wangxun (txgbe): - implement support for udp tunnel offload - complete PTP and SRIOV support for AML 25G/10G devices - Ethernet NICs embedded and virtual: - Google (gve): - add device memory TCP TX support - Amazon (ena): - support persistent per-NAPI config - Airoha: - add H/W support for L2 traffic offload - add per flow stats for flow offloading - RealTek (rtl8211): add support for WoL magic packet - Synopsys (stmmac): - dwmac-socfpga 1000BaseX support - add Loongson-2K3000 support - introduce support for hardware-accelerated VLAN stripping - Broadcom (bcmgenet): - expose more H/W stats - Freescale (enetc, dpaa2-eth): - enetc: add MAC filter, VLAN filter RSS and loopback support - dpaa2-eth: convert to H/W timestamping APIs - vxlan: convert FDB table to rhashtable, for better scalabilty - veth: apply qdisc backpressure on full ring to reduce TX drops - Ethernet switches: - Microchip (kzZ88x3): add ETS scheduler support - Ethernet PHYs: - RealTek (rtl8211): - add support for WoL magic packet - add support for PHY LEDs - CAN: - Adds RZ/G3E CANFD support to the rcar_canfd driver. - Preparatory work for CAN-XL support. - Add self-tests framework with support for CAN physical interfaces. - WiFi: - mac80211: - scan improvements with multi-link operation (MLO) - Qualcomm (ath12k): - enable AHB support for IPQ5332 - add monitor interface support to QCN9274 - add multi-link operation support to WCN7850 - add 802.11d scan offload support to WCN7850 - monitor mode for WCN7850, better 6 GHz regulatory - Qualcomm (ath11k): - restore hibernation support - MediaTek (mt76): - WiFi-7 improvements - implement support for mt7990 - Intel (iwlwifi): - enhanced multi-link single-radio (EMLSR) support on 5 GHz links - rework device configuration - RealTek (rtw88): - improve throughput for RTL8814AU - RealTek (rtw89): - add multi-link operation support - STA/P2P concurrency improvements - support different SAR configs by antenna - Bluetooth: - introduce HCI Driver protocol - btintel_pcie: do not generate coredump for diagnostic events - btusb: add HCI Drv commands for configuring altsetting - btusb: add RTL8851BE device 0x0bda:0xb850 - btusb: add new VID/PID 13d3/3584 for MT7922 - btusb: add new VID/PID 13d3/3630 and 13d3/3613 for MT7925 - btnxpuart: implement host-wakeup feature" * tag 'net-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1611 commits) selftests/bpf: Fix bpf selftest build warning selftests: netfilter: Fix skip of wildcard interface test net: phy: mscc: Stop clearing the the UDPv4 checksum for L2 frames net: openvswitch: Fix the dead loop of MPLS parse calipso: Don't call calipso functions for AF_INET sk. selftests/tc-testing: Add a test for HFSC eltree double add with reentrant enqueue behaviour on netem net_sched: hfsc: Address reentrant enqueue adding class to eltree twice octeontx2-pf: QOS: Refactor TC_HTB_LEAF_DEL_LAST callback octeontx2-pf: QOS: Perform cache sync on send queue teardown net: mana: Add support for Multi Vports on Bare metal net: devmem: ncdevmem: remove unused variable net: devmem: ksft: upgrade rx test to send 1K data net: devmem: ksft: add 5 tuple FS support net: devmem: ksft: add exit_wait to make rx test pass net: devmem: ksft: add ipv4 support net: devmem: preserve sockc_err page_pool: fix ugly page_pool formatting net: devmem: move list_add to net_devmem_bind_dmabuf. selftests: netfilter: nft_queue.sh: include file transfer duration in log message net: phy: mscc: Fix memory leak when using one step timestamping ... |
||
![]() |
c35328632e |
m68k updates for v6.16
- One more strscpy() conversion, - Fix detection of real Mac II, - Defconfig updates. -----BEGIN PGP SIGNATURE----- iIsEABYKADMWIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCaDRiLhUcZ2VlcnRAbGlu dXgtbTY4ay5vcmcACgkQisJQ/WRJ8XACmgD+I+xNAoTSirgrwRznil17AuG6dsEo jxlPKR7XRHIrO4oA/iucnB8TmIo3/v5QlHv7tam11TvOBdikKHZIc5+25h8C =hNKz -----END PGP SIGNATURE----- Merge tag 'm68k-for-v6.16-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k updates from Geert Uytterhoeven: - One more strscpy() conversion - Fix detection of real Mac II - defconfig updates * tag 'm68k-for-v6.16-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: defconfig: Update defconfigs for v6.15-rc1 m68k: mac: Fix macintosh_config for Mac II m68k: Replace strcpy() with strscpy() in hardware_proc_show() |
||
![]() |
14418ddcc2 |
This update includes the following changes:
API: - Fix memcpy_sglist to handle partially overlapping SG lists. - Use memcpy_sglist to replace null skcipher. - Rename CRYPTO_TESTS to CRYPTO_BENCHMARK. - Flip CRYPTO_MANAGER_DISABLE_TEST into CRYPTO_SELFTESTS. - Hide CRYPTO_MANAGER. - Add delayed freeing of driver crypto_alg structures. Compression: - Allocate large buffers on first use instead of initialisation in scomp. - Drop destination linearisation buffer in scomp. - Move scomp stream allocation into acomp. - Add acomp scatter-gather walker. - Remove request chaining. - Add optional async request allocation. Hashing: - Remove request chaining. - Add optional async request allocation. - Move partial block handling into API. - Add ahash support to hmac. - Fix shash documentation to disallow usage in hard IRQs. Algorithms: - Remove unnecessary SIMD fallback code on x86 and arm/arm64. - Drop avx10_256 xts(aes)/ctr(aes) on x86. - Improve avx-512 optimisations for xts(aes). - Move chacha arch implementations into lib/crypto. - Move poly1305 into lib/crypto and drop unused Crypto API algorithm. - Disable powerpc/poly1305 as it has no SIMD fallback. - Move sha256 arch implementations into lib/crypto. - Convert deflate to acomp. - Set block size correctly in cbcmac. Drivers: - Do not use sg_dma_len before mapping in sun8i-ss. - Fix warm-reboot failure by making shutdown do more work in qat. - Add locking in zynqmp-sha. - Remove cavium/zip. - Add support for PCI device 0x17D8 to ccp. - Add qat_6xxx support in qat. - Add support for RK3576 in rockchip-rng. - Add support for i.MX8QM in caam. Others: - Fix irq_fpu_usable/kernel_fpu_begin inconsistency during CPU bring-up. - Add new SEV/SNP platform shutdown API in ccp. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEn51F/lCuNhUwmDeSxycdCkmxi6cFAmgz47AACgkQxycdCkmx i6fvKRAAr4Xa903L0r1Q1P1alQqoFFCqimUWeH72m68LiWynHWi0lUo0z/+tKweg mnPStz7/Ha9HRHJjdNCMPnlJqXQDkuH3bIOuBJCwduDuhHo9VGOd46XGzmGMv3gb HKuZhI0lk7pznK3CSyD/2nHmbDCHD+7feTZSBMoN9mm875+aSoM6fdxgak8uPFcq KbB1L+hObTn2kAPSqRrNOR8/xG2N7hdH8eax7Li+LAtqYNVT5HvWVECsB/CKRPfB sgAv3UTzcIFapSSHUHaONppSeoqPAIAeV7SdQhJvlT+EUUR/h/B6+D9OUQQqbphQ LBalgTnqMKl0ymDEQFQ6QyYCat9ZfNmDft2WcXEsxc8PxImkgJI1W3B8O51sOjbG 78D8JqVQ96dleo4FsBhM2wfG0b41JM6zU4raC4vS7a3qsUS+Q1MpehvcS1iORicy SpGdE8e7DLlxKhzWyW1xJnbrtMZDC7Sa2hUnxrvP0/xOvRhChKscRVtWcf0a5q7X 8JmuvwVSOJuSbQ3MeFbQvpo5lR9+0WsNjM6e9miiH6Y7vZUKmWcq2yDp377qVzeh 7NK6+OwGIQZZExrmtPw2BXwssT9Eg+ks6Y7g2Ne7yzvrjVNfEPY7Cws/5w7p8mRS qhrcpbJNFlWgD7YYkmGZFTQ8DCN25ipP8lklO/hbcfchqLE/o1o= =O8L5 -----END PGP SIGNATURE----- Merge tag 'v6.16-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Fix memcpy_sglist to handle partially overlapping SG lists - Use memcpy_sglist to replace null skcipher - Rename CRYPTO_TESTS to CRYPTO_BENCHMARK - Flip CRYPTO_MANAGER_DISABLE_TEST into CRYPTO_SELFTESTS - Hide CRYPTO_MANAGER - Add delayed freeing of driver crypto_alg structures Compression: - Allocate large buffers on first use instead of initialisation in scomp - Drop destination linearisation buffer in scomp - Move scomp stream allocation into acomp - Add acomp scatter-gather walker - Remove request chaining - Add optional async request allocation Hashing: - Remove request chaining - Add optional async request allocation - Move partial block handling into API - Add ahash support to hmac - Fix shash documentation to disallow usage in hard IRQs Algorithms: - Remove unnecessary SIMD fallback code on x86 and arm/arm64 - Drop avx10_256 xts(aes)/ctr(aes) on x86 - Improve avx-512 optimisations for xts(aes) - Move chacha arch implementations into lib/crypto - Move poly1305 into lib/crypto and drop unused Crypto API algorithm - Disable powerpc/poly1305 as it has no SIMD fallback - Move sha256 arch implementations into lib/crypto - Convert deflate to acomp - Set block size correctly in cbcmac Drivers: - Do not use sg_dma_len before mapping in sun8i-ss - Fix warm-reboot failure by making shutdown do more work in qat - Add locking in zynqmp-sha - Remove cavium/zip - Add support for PCI device 0x17D8 to ccp - Add qat_6xxx support in qat - Add support for RK3576 in rockchip-rng - Add support for i.MX8QM in caam Others: - Fix irq_fpu_usable/kernel_fpu_begin inconsistency during CPU bring-up - Add new SEV/SNP platform shutdown API in ccp" * tag 'v6.16-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (382 commits) x86/fpu: Fix irq_fpu_usable() to return false during CPU onlining crypto: qat - add missing header inclusion crypto: api - Redo lookup on EEXIST Revert "crypto: testmgr - Add hash export format testing" crypto: marvell/cesa - Do not chain submitted requests crypto: powerpc/poly1305 - add depends on BROKEN for now Revert "crypto: powerpc/poly1305 - Add SIMD fallback" crypto: ccp - Add missing tee info reg for teev2 crypto: ccp - Add missing bootloader info reg for pspv5 crypto: sun8i-ce - move fallback ahash_request to the end of the struct crypto: octeontx2 - Use dynamic allocated memory region for lmtst crypto: octeontx2 - Initialize cptlfs device info once crypto: xts - Only add ecb if it is not already there crypto: lrw - Only add ecb if it is not already there crypto: testmgr - Add hash export format testing crypto: testmgr - Use ahash for generic tfm crypto: hmac - Add ahash support crypto: testmgr - Ignore EEXIST on shash allocation crypto: algapi - Add driver template support to crypto_inst_setname crypto: shash - Set reqsize in shash_alg ... |
||
![]() |
181d8e399f |
vfs-6.16-rc1.misc
-----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaDBPTwAKCRCRxhvAZXjc om0+AQDMxKLweJXplqQQ7jxuvW2dEa60YpE2EalEKWGg9YA3KgEA3nI4kyKMKn7Y PRFXgIcKvhs62oJLKsq8SGQUqExqvAE= =atEw -----END PGP SIGNATURE----- Merge tag 'vfs-6.16-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs Pull misc vfs updates from Christian Brauner: "This contains the usual selections of misc updates for this cycle. Features: - Use folios for symlinks in the page cache FUSE already uses folios for its symlinks. Mirror that conversion in the generic code and the NFS code. That lets us get rid of a few folio->page->folio conversions in this path, and some of the few remaining users of read_cache_page() / read_mapping_page() - Try and make a few filesystem operations killable on the VFS inode->i_mutex level - Add sysctl vfs_cache_pressure_denom for bulk file operations Some workloads need to preserve more dentries than we currently allow through out sysctl interface A HDFS servers with 12 HDDs per server, on a HDFS datanode startup involves scanning all files and caching their metadata (including dentries and inodes) in memory. Each HDD contains approximately 2 million files, resulting in a total of ~20 million cached dentries after initialization To minimize dentry reclamation, they set vfs_cache_pressure to 1. Despite this configuration, memory pressure conditions can still trigger reclamation of up to 50% of cached dentries, reducing the cache from 20 million to approximately 10 million entries. During the subsequent cache rebuild period, any HDFS datanode restart operation incurs substantial latency penalties until full cache recovery completes To maintain service stability, more dentries need to be preserved during memory reclamation. The current minimum reclaim ratio (1/100 of total dentries) remains too aggressive for such workload. This patch introduces vfs_cache_pressure_denom for more granular cache pressure control The configuration [vfs_cache_pressure=1, vfs_cache_pressure_denom=10000] effectively maintains the full 20 million dentry cache under memory pressure, preventing datanode restart performance degradation - Avoid some jumps in inode_permission() using likely()/unlikely() - Avid a memory access which is most likely a cache miss when descending into devcgroup_inode_permission() - Add fastpath predicts for stat() and fdput() - Anonymous inodes currently don't come with a proper mode causing issues in the kernel when we want to add useful VFS debug assert. Fix that by giving them a proper mode and masking it off when we report it to userspace which relies on them not having any mode - Anonymous inodes currently allow to change inode attributes because the VFS falls back to simple_setattr() if i_op->setattr isn't implemented. This means the ownership and mode for every single user of anon_inode_inode can be changed. Block that as it's either useless or actively harmful. If specific ownership is needed the respective subsystem should allocate anonymous inodes from their own private superblock - Raise SB_I_NODEV and SB_I_NOEXEC on the anonymous inode superblock - Add proper tests for anonymous inode behavior - Make it easy to detect proper anonymous inodes and to ensure that we can detect them in codepaths such as readahead() Cleanups: - Port pidfs to the new anon_inode_{g,s}etattr() helpers - Try to remove the uselib() system call - Add unlikely branch hint return path for poll - Add unlikely branch hint on return path for core_sys_select - Don't allow signals to interrupt getdents copying for fuse - Provide a size hint to dir_context for during readdir() - Use writeback_iter directly in mpage_writepages - Update compression and mtime descriptions in initramfs documentation - Update main netfs API document - Remove useless plus one in super_cache_scan() - Remove unnecessary NULL-check guards during setns() - Add separate separate {get,put}_cgroup_ns no-op cases Fixes: - Fix typo in root= kernel parameter description - Use KERN_INFO for infof()|info_plog()|infofc() - Correct comments of fs_validate_description() - Mark an unlikely if condition with unlikely() in vfs_parse_monolithic_sep() - Delete macro fsparam_u32hex() - Remove unused and problematic validate_constant_table() - Fix potential unsigned integer underflow in fs_name() - Make file-nr output the total allocated file handles" * tag 'vfs-6.16-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (43 commits) fs: Pass a folio to page_put_link() nfs: Use a folio in nfs_get_link() fs: Convert __page_get_link() to use a folio fs/read_write: make default_llseek() killable fs/open: make do_truncate() killable fs/open: make chmod_common() and chown_common() killable include/linux/fs.h: add inode_lock_killable() readdir: supply dir_context.count as readdir buffer size hint vfs: Add sysctl vfs_cache_pressure_denom for bulk file operations fuse: don't allow signals to interrupt getdents copying Documentation: fix typo in root= kernel parameter description include/cgroup: separate {get,put}_cgroup_ns no-op case kernel/nsproxy: remove unnecessary guards fs: use writeback_iter directly in mpage_writepages fs: remove useless plus one in super_cache_scan() fs: add S_ANON_INODE fs: remove uselib() system call device_cgroup: avoid access to ->i_rdev in the common case in devcgroup_inode_permission() fs/fs_parse: Remove unused and problematic validate_constant_table() fs: touch up predicts in inode_permission() ... |
||
![]() |
3f1716ee0f |
net: phy: fixed_phy: remove irq argument from fixed_phy_add
All callers pass PHY_POLL, therefore remove irq argument from fixed_phy_add(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Acked-by: Greg Ungerer <gerg@linux-m68k.org> Link: https://patch.msgid.link/b3b9b3bc-c310-4a54-b376-c909c83575de@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
![]() |
f440518f37 |
m68k: defconfig: Update defconfigs for v6.15-rc1
- Drop CONFIG_PRIME_NUMBERS=m (auto-modular since commit |
||
![]() |
eb43efd062 |
m68k: Replace memcpy() + manual NUL-termination with strscpy()
Use strscpy() to safely copy the command-line string instead of memcpy() followed by a manual NUL-termination. The source string is also NUL-terminated and meets the __must_be_cstr() requirement of strscpy(). No functional changes intended. Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Signed-off-by: Greg Ungerer <gerg@linux-m68k.org> |
||
![]() |
245bb7b95a |
m68k/kernel: replace strncpy() with strscpy()
Swapped out strncpy() for strscpy() in parse_uboot_commandline() while copying to commandp. strscpy() makes sure the string is properly null- terminated and gives a more useful return value so it's just a safer choice overall. Link: https://github.com/KSPP/linux/issues/90 Signed-off-by: Mohammad Mahdi Anbaraki <m.mahdianbaraki@gmail.com> Signed-off-by: Greg Ungerer <gerg@linux-m68k.org> |
||
![]() |
0c4aba403f |
m68k: coldfire: gpio: use new line value setter callbacks
struct gpio_chip now has callbacks for setting line values that return an integer, allowing to indicate failures. Convert the driver to using them. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Ungerer <gerg@linux-m68k.org> |
||
![]() |
3357b6c945 |
crypto: tcrypt - rename CRYPTO_TEST to CRYPTO_BENCHMARK
tcrypt is actually a benchmarking module and not the actual tests. This regularly causes confusion. Update the kconfig option name and help text accordingly. Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
![]() |
5a392e991d |
m68k: mm: call ctor/dtor for kernel PTEs
The generic implementation of pte_{alloc_one,free}_kernel now calls the [cd]tor. Align the m68k/ColdFire implementation of those functions by calling the [cd]tor explicitly. Link: https://lkml.kernel.org/r/20250408095222.860601-5-kevin.brodsky@arm.com Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Andreas Larsson <andreas@gaisler.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David S. Miller <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Linus Waleij <linus.walleij@linaro.org> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Mike Rapoport <rppt@kernel.org> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Will Deacon <will@kernel.org> Cc: <x86@kernel.org> Cc: Yang Shi <yang@os.amperecomputing.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
d82d3bf411 |
mm: pass mm down to pagetable_{pte,pmd}_ctor
Patch series "Always call constructor for kernel page tables", v2.
There has been much confusion around exactly when page table
constructors/destructors (pagetable_*_[cd]tor) are supposed to be called.
They were initially introduced for user PTEs only (to support split page
table locks), then at the PMD level for the same purpose. Accounting was
added later on, starting at the PTE level and then moving to higher levels
(PMD, PUD). Finally, with my earlier series "Account page tables at all
levels" [1], the ctor/dtor is run for all levels, all the way to PGD.
I thought this was the end of the story, and it hopefully is for user
pgtables, but I was wrong for what concerns kernel pgtables. The current
situation there makes very little sense:
* At the PTE level, the ctor/dtor is not called (at least in the generic
implementation). Specific helpers are used for kernel pgtables at this
level (pte_{alloc,free}_kernel()) and those have never called the
ctor/dtor, most likely because they were initially irrelevant in the
kernel case.
* At all other levels, the ctor/dtor is normally called. This is
potentially wasteful at the PMD level (more on that later).
This series aims to ensure that the ctor/dtor is always called for kernel
pgtables, as it already is for user pgtables. Besides consistency, the
main motivation is to guarantee that ctor/dtor hooks are systematically
called; this makes it possible to insert hooks to protect page tables [2],
for instance. There is however an extra challenge: split locks are not
used for kernel pgtables, and it would therefore be wasteful to initialise
them (ptlock_init()).
It is worth clarifying exactly when split locks are used. They clearly
are for user pgtables, but as illustrated in commit
|
||
![]() |
cc6622730b |
syscall.h: introduce syscall_set_nr()
Similar to syscall_set_arguments() that complements syscall_get_arguments(), introduce syscall_set_nr() that complements syscall_get_nr(). syscall_set_nr() is going to be needed along with syscall_set_arguments() on all HAVE_ARCH_TRACEHOOK architectures to implement PTRACE_SET_SYSCALL_INFO API. Link: https://lkml.kernel.org/r/20250303112020.GD24170@strace.io Signed-off-by: Dmitry V. Levin <ldv@strace.io> Tested-by: Charlie Jenkins <charlie@rivosinc.com> Reviewed-by: Charlie Jenkins <charlie@rivosinc.com> Acked-by: Helge Deller <deller@gmx.de> # parisc Reviewed-by: Maciej W. Rozycki <macro@orcam.me.uk> # mips Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Alexey Gladkov (Intel) <legion@kernel.org> Cc: Andreas Larsson <andreas@gaisler.com> Cc: anton ivanov <anton.ivanov@cambridgegreys.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Betkov <bp@alien8.de> Cc: Brian Cain <bcain@quicinc.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christian Zankel <chris@zankel.net> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Davide Berardi <berardi.dav@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Eugene Syromiatnikov <esyr@redhat.com> Cc: Eugene Syromyatnikov <evgsyr@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Jonas Bonn <jonas@southpole.se> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Naveen N Rao <naveen@kernel.org> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Renzo Davoi <renzo@cs.unibo.it> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russel King <linux@armlinux.org.uk> Cc: Shuah Khan <shuah@kernel.org> Cc: Stafford Horne <shorne@gmail.com> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Thomas Gleinxer <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vineet Gupta <vgupta@kernel.org> Cc: WANG Xuerui <kernel@xen0n.name> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
cb5b13cd6c |
mm: introduce a common definition of mk_pte()
Most architectures simply call pfn_pte(). Centralise that as the normal definition and remove the definition of mk_pte() from the architectures which have either that exact definition or something similar. Link: https://lkml.kernel.org/r/20250402181709.2386022-3-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> # s390 Cc: Zi Yan <ziy@nvidia.com> Cc: Andreas Larsson <andreas@gaisler.com> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Muchun Song <muchun.song@linux.dev> Cc: Richard Weinberger <richard@nod.at> Cc: <x86@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
52ae3f5da7 |
m68k: mac: Fix macintosh_config for Mac II
When booted on my Mac II, the kernel prints this:
Detected Macintosh model: 6
Apple Macintosh Unknown
The catch-all entry ("Unknown") is mac_data_table[0] which is only needed
in the unlikely event that the bootinfo model ID can't be matched.
When model ID is 6, the search should begin and end at mac_data_table[1].
Fix the off-by-one error that causes this problem.
Cc: Joshua Thompson <funaho@jurai.org>
Fixes:
|
||
![]() |
a8a19a1963 |
m68k: Replace strcpy() with strscpy() in hardware_proc_show()
strcpy() is deprecated; use strscpy() instead. Link: https://github.com/KSPP/linux/issues/88 Cc: linux-hardening@vger.kernel.org Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@yoseli.org> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/20250421122839.363619-1-thorsten.blum@linux.dev Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> |
||
![]() |
79beea2db0
|
fs: remove uselib() system call
This system call has been deprecated for quite a while now. Let's try and remove it from the kernel completely. Link: https://lore.kernel.org/20250415-kanufahren-besten-02ac00e6becd@brauner Acked-by: Kees Cook <kees@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
![]() |
2a63dd0edf |
net: Retire DCCP socket.
DCCP was orphaned in 2021 by commit |
||
![]() |
97c484ccb8 |
CRC cleanups for 6.15
Finish cleaning up the CRC kconfig options by removing the remaining unnecessary prompts and an unnecessary 'default y', removing CONFIG_LIBCRC32C, and documenting all the CRC library options. -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCZ/P7QhQcZWJpZ2dlcnNA Z29vZ2xlLmNvbQAKCRDzXCl4vpKOKyoOAQCynFcS1dWuD27S+SdUREmBjMAoZo5M zdsIvlPv9KLycgD/QX5lXjW3KIYY6jQ8vHUuLVwfDl/JEp4GJS9dLGU+agg= =0R1T -----END PGP SIGNATURE----- Merge tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux Pull CRC cleanups from Eric Biggers: "Finish cleaning up the CRC kconfig options by removing the remaining unnecessary prompts and an unnecessary 'default y', removing CONFIG_LIBCRC32C, and documenting all the CRC library options" * tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: lib/crc: remove CONFIG_LIBCRC32C lib/crc: document all the CRC library kconfig options lib/crc: remove unnecessary prompt for CONFIG_CRC_ITU_T lib/crc: remove unnecessary prompt for CONFIG_CRC_T10DIF lib/crc: remove unnecessary prompt for CONFIG_CRC16 lib/crc: remove unnecessary prompt for CONFIG_CRC_CCITT lib/crc: remove unnecessary prompt for CONFIG_CRC32 and drop 'default y' |
||
![]() |
8fa7292fee |
treewide: Switch/rename to timer_delete[_sync]()
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree over and remove the historical wrapper inlines. Conversion was done with coccinelle plus manual fixups where necessary. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> |