mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
synced 2025-08-31 06:09:56 +00:00
loongarch-next
190 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
beace86e61 |
Summary of significant series in this pull request:
- The 4 patch series "mm: ksm: prevent KSM from breaking merging of new
VMAs" from Lorenzo Stoakes addresses an issue with KSM's
PR_SET_MEMORY_MERGE mode: newly mapped VMAs were not eligible for
merging with existing adjacent VMAs.
- The 4 patch series "mm/damon: introduce DAMON_STAT for simple and
practical access monitoring" from SeongJae Park adds a new kernel module
which simplifies the setup and usage of DAMON in production
environments.
- The 6 patch series "stop passing a writeback_control to swap/shmem
writeout" from Christoph Hellwig is a cleanup to the writeback code
which removes a couple of pointers from struct writeback_control.
- The 7 patch series "drivers/base/node.c: optimization and cleanups"
from Donet Tom contains largely uncorrelated cleanups to the NUMA node
setup and management code.
- The 4 patch series "mm: userfaultfd: assorted fixes and cleanups" from
Tal Zussman does some maintenance work on the userfaultfd code.
- The 5 patch series "Readahead tweaks for larger folios" from Ryan
Roberts implements some tuneups for pagecache readahead when it is
reading into order>0 folios.
- The 4 patch series "selftests/mm: Tweaks to the cow test" from Mark
Brown provides some cleanups and consistency improvements to the
selftests code.
- The 4 patch series "Optimize mremap() for large folios" from Dev Jain
does that. A 37% reduction in execution time was measured in a
memset+mremap+munmap microbenchmark.
- The 5 patch series "Remove zero_user()" from Matthew Wilcox expunges
zero_user() in favor of the more modern memzero_page().
- The 3 patch series "mm/huge_memory: vmf_insert_folio_*() and
vmf_insert_pfn_pud() fixes" from David Hildenbrand addresses some warts
which David noticed in the huge page code. These were not known to be
causing any issues at this time.
- The 3 patch series "mm/damon: use alloc_migrate_target() for
DAMOS_MIGRATE_{HOT,COLD" from SeongJae Park provides some cleanup and
consolidation work in DAMON.
- The 3 patch series "use vm_flags_t consistently" from Lorenzo Stoakes
uses vm_flags_t in places where we were inappropriately using other
types.
- The 3 patch series "mm/memfd: Reserve hugetlb folios before
allocation" from Vivek Kasireddy increases the reliability of large page
allocation in the memfd code.
- The 14 patch series "mm: Remove pXX_devmap page table bit and pfn_t
type" from Alistair Popple removes several now-unneeded PFN_* flags.
- The 5 patch series "mm/damon: decouple sysfs from core" from SeongJae
Park implememnts some cleanup and maintainability work in the DAMON
sysfs layer.
- The 5 patch series "madvise cleanup" from Lorenzo Stoakes does quite a
lot of cleanup/maintenance work in the madvise() code.
- The 4 patch series "madvise anon_name cleanups" from Vlastimil Babka
provides additional cleanups on top or Lorenzo's effort.
- The 11 patch series "Implement numa node notifier" from Oscar Salvador
creates a standalone notifier for NUMA node memory state changes.
Previously these were lumped under the more general memory on/offline
notifier.
- The 6 patch series "Make MIGRATE_ISOLATE a standalone bit" from Zi Yan
cleans up the pageblock isolation code and fixes a potential issue which
doesn't seem to cause any problems in practice.
- The 5 patch series "selftests/damon: add python and drgn based DAMON
sysfs functionality tests" from SeongJae Park adds additional drgn- and
python-based DAMON selftests which are more comprehensive than the
existing selftest suite.
- The 5 patch series "Misc rework on hugetlb faulting path" from Oscar
Salvador fixes a rather obscure deadlock in the hugetlb fault code and
follows that fix with a series of cleanups.
- The 3 patch series "cma: factor out allocation logic from
__cma_declare_contiguous_nid" from Mike Rapoport rationalizes and cleans
up the highmem-specific code in the CMA allocator.
- The 28 patch series "mm/migration: rework movable_ops page migration
(part 1)" from David Hildenbrand provides cleanups and
future-preparedness to the migration code.
- The 2 patch series "mm/damon: add trace events for auto-tuned
monitoring intervals and DAMOS quota" from SeongJae Park adds some
tracepoints to some DAMON auto-tuning code.
- The 6 patch series "mm/damon: fix misc bugs in DAMON modules" from
SeongJae Park does that.
- The 6 patch series "mm/damon: misc cleanups" from SeongJae Park also
does what it claims.
- The 4 patch series "mm: folio_pte_batch() improvements" from David
Hildenbrand cleans up the large folio PTE batching code.
- The 13 patch series "mm/damon/vaddr: Allow interleaving in
migrate_{hot,cold} actions" from SeongJae Park facilitates dynamic
alteration of DAMON's inter-node allocation policy.
- The 3 patch series "Remove unmap_and_put_page()" from Vishal Moola
provides a couple of page->folio conversions.
- The 4 patch series "mm: per-node proactive reclaim" from Davidlohr
Bueso implements a per-node control of proactive reclaim - beyond the
current memcg-based implementation.
- The 14 patch series "mm/damon: remove damon_callback" from SeongJae
Park replaces the damon_callback interface with a more general and
powerful damon_call()+damos_walk() interface.
- The 10 patch series "mm/mremap: permit mremap() move of multiple VMAs"
from Lorenzo Stoakes implements a number of mremap cleanups (of course)
in preparation for adding new mremap() functionality: newly permit the
remapping of multiple VMAs when the user is specifying MREMAP_FIXED. It
still excludes some specialized situations where this cannot be
performed reliably.
- The 3 patch series "drop hugetlb_free_pgd_range()" from Anthony Yznaga
switches some sparc hugetlb code over to the generic version and removes
the thus-unneeded hugetlb_free_pgd_range().
- The 4 patch series "mm/damon/sysfs: support periodic and automated
stats update" from SeongJae Park augments the present
userspace-requested update of DAMON sysfs monitoring files. Automatic
update is now provided, along with a tunable to control the update
interval.
- The 4 patch series "Some randome fixes and cleanups to swapfile" from
Kemeng Shi does what is claims.
- The 4 patch series "mm: introduce snapshot_page" from Luiz Capitulino
and David Hildenbrand provides (and uses) a means by which debug-style
functions can grab a copy of a pageframe and inspect it locklessly
without tripping over the races inherent in operating on the live
pageframe directly.
- The 6 patch series "use per-vma locks for /proc/pid/maps reads" from
Suren Baghdasaryan addresses the large contention issues which can be
triggered by reads from that procfs file. Latencies are reduced by more
than half in some situations. The series also introduces several new
selftests for the /proc/pid/maps interface.
- The 6 patch series "__folio_split() clean up" from Zi Yan cleans up
__folio_split()!
- The 7 patch series "Optimize mprotect() for large folios" from Dev
Jain provides some quite large (>3x) speedups to mprotect() when dealing
with large folios.
- The 2 patch series "selftests/mm: reuse FORCE_READ to replace "asm
volatile("" : "+r" (XXX));" and some cleanup" from wang lian does some
cleanup work in the selftests code.
- The 3 patch series "tools/testing: expand mremap testing" from Lorenzo
Stoakes extends the mremap() selftest in several ways, including adding
more checking of Lorenzo's recently added "permit mremap() move of
multiple VMAs" feature.
- The 22 patch series "selftests/damon/sysfs.py: test all parameters"
from SeongJae Park extends the DAMON sysfs interface selftest so that it
tests all possible user-requested parameters. Rather than the present
minimal subset.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaIqcCgAKCRDdBJ7gKXxA
jkVBAQCCn9DR1QP0CRk961ot0cKzOgioSc0aA03DPb2KXRt2kQEAzDAz0ARurFhL
8BzbvI0c+4tntHLXvIlrC33n9KWAOQM=
=XsFy
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2025-07-30-15-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"As usual, many cleanups. The below blurbiage describes 42 patchsets.
21 of those are partially or fully cleanup work. "cleans up",
"cleanup", "maintainability", "rationalizes", etc.
I never knew the MM code was so dirty.
"mm: ksm: prevent KSM from breaking merging of new VMAs" (Lorenzo Stoakes)
addresses an issue with KSM's PR_SET_MEMORY_MERGE mode: newly
mapped VMAs were not eligible for merging with existing adjacent
VMAs.
"mm/damon: introduce DAMON_STAT for simple and practical access monitoring" (SeongJae Park)
adds a new kernel module which simplifies the setup and usage of
DAMON in production environments.
"stop passing a writeback_control to swap/shmem writeout" (Christoph Hellwig)
is a cleanup to the writeback code which removes a couple of
pointers from struct writeback_control.
"drivers/base/node.c: optimization and cleanups" (Donet Tom)
contains largely uncorrelated cleanups to the NUMA node setup and
management code.
"mm: userfaultfd: assorted fixes and cleanups" (Tal Zussman)
does some maintenance work on the userfaultfd code.
"Readahead tweaks for larger folios" (Ryan Roberts)
implements some tuneups for pagecache readahead when it is reading
into order>0 folios.
"selftests/mm: Tweaks to the cow test" (Mark Brown)
provides some cleanups and consistency improvements to the
selftests code.
"Optimize mremap() for large folios" (Dev Jain)
does that. A 37% reduction in execution time was measured in a
memset+mremap+munmap microbenchmark.
"Remove zero_user()" (Matthew Wilcox)
expunges zero_user() in favor of the more modern memzero_page().
"mm/huge_memory: vmf_insert_folio_*() and vmf_insert_pfn_pud() fixes" (David Hildenbrand)
addresses some warts which David noticed in the huge page code.
These were not known to be causing any issues at this time.
"mm/damon: use alloc_migrate_target() for DAMOS_MIGRATE_{HOT,COLD" (SeongJae Park)
provides some cleanup and consolidation work in DAMON.
"use vm_flags_t consistently" (Lorenzo Stoakes)
uses vm_flags_t in places where we were inappropriately using other
types.
"mm/memfd: Reserve hugetlb folios before allocation" (Vivek Kasireddy)
increases the reliability of large page allocation in the memfd
code.
"mm: Remove pXX_devmap page table bit and pfn_t type" (Alistair Popple)
removes several now-unneeded PFN_* flags.
"mm/damon: decouple sysfs from core" (SeongJae Park)
implememnts some cleanup and maintainability work in the DAMON
sysfs layer.
"madvise cleanup" (Lorenzo Stoakes)
does quite a lot of cleanup/maintenance work in the madvise() code.
"madvise anon_name cleanups" (Vlastimil Babka)
provides additional cleanups on top or Lorenzo's effort.
"Implement numa node notifier" (Oscar Salvador)
creates a standalone notifier for NUMA node memory state changes.
Previously these were lumped under the more general memory
on/offline notifier.
"Make MIGRATE_ISOLATE a standalone bit" (Zi Yan)
cleans up the pageblock isolation code and fixes a potential issue
which doesn't seem to cause any problems in practice.
"selftests/damon: add python and drgn based DAMON sysfs functionality tests" (SeongJae Park)
adds additional drgn- and python-based DAMON selftests which are
more comprehensive than the existing selftest suite.
"Misc rework on hugetlb faulting path" (Oscar Salvador)
fixes a rather obscure deadlock in the hugetlb fault code and
follows that fix with a series of cleanups.
"cma: factor out allocation logic from __cma_declare_contiguous_nid" (Mike Rapoport)
rationalizes and cleans up the highmem-specific code in the CMA
allocator.
"mm/migration: rework movable_ops page migration (part 1)" (David Hildenbrand)
provides cleanups and future-preparedness to the migration code.
"mm/damon: add trace events for auto-tuned monitoring intervals and DAMOS quota" (SeongJae Park)
adds some tracepoints to some DAMON auto-tuning code.
"mm/damon: fix misc bugs in DAMON modules" (SeongJae Park)
does that.
"mm/damon: misc cleanups" (SeongJae Park)
also does what it claims.
"mm: folio_pte_batch() improvements" (David Hildenbrand)
cleans up the large folio PTE batching code.
"mm/damon/vaddr: Allow interleaving in migrate_{hot,cold} actions" (SeongJae Park)
facilitates dynamic alteration of DAMON's inter-node allocation
policy.
"Remove unmap_and_put_page()" (Vishal Moola)
provides a couple of page->folio conversions.
"mm: per-node proactive reclaim" (Davidlohr Bueso)
implements a per-node control of proactive reclaim - beyond the
current memcg-based implementation.
"mm/damon: remove damon_callback" (SeongJae Park)
replaces the damon_callback interface with a more general and
powerful damon_call()+damos_walk() interface.
"mm/mremap: permit mremap() move of multiple VMAs" (Lorenzo Stoakes)
implements a number of mremap cleanups (of course) in preparation
for adding new mremap() functionality: newly permit the remapping
of multiple VMAs when the user is specifying MREMAP_FIXED. It still
excludes some specialized situations where this cannot be performed
reliably.
"drop hugetlb_free_pgd_range()" (Anthony Yznaga)
switches some sparc hugetlb code over to the generic version and
removes the thus-unneeded hugetlb_free_pgd_range().
"mm/damon/sysfs: support periodic and automated stats update" (SeongJae Park)
augments the present userspace-requested update of DAMON sysfs
monitoring files. Automatic update is now provided, along with a
tunable to control the update interval.
"Some randome fixes and cleanups to swapfile" (Kemeng Shi)
does what is claims.
"mm: introduce snapshot_page" (Luiz Capitulino and David Hildenbrand)
provides (and uses) a means by which debug-style functions can grab
a copy of a pageframe and inspect it locklessly without tripping
over the races inherent in operating on the live pageframe
directly.
"use per-vma locks for /proc/pid/maps reads" (Suren Baghdasaryan)
addresses the large contention issues which can be triggered by
reads from that procfs file. Latencies are reduced by more than
half in some situations. The series also introduces several new
selftests for the /proc/pid/maps interface.
"__folio_split() clean up" (Zi Yan)
cleans up __folio_split()!
"Optimize mprotect() for large folios" (Dev Jain)
provides some quite large (>3x) speedups to mprotect() when dealing
with large folios.
"selftests/mm: reuse FORCE_READ to replace "asm volatile("" : "+r" (XXX));" and some cleanup" (wang lian)
does some cleanup work in the selftests code.
"tools/testing: expand mremap testing" (Lorenzo Stoakes)
extends the mremap() selftest in several ways, including adding
more checking of Lorenzo's recently added "permit mremap() move of
multiple VMAs" feature.
"selftests/damon/sysfs.py: test all parameters" (SeongJae Park)
extends the DAMON sysfs interface selftest so that it tests all
possible user-requested parameters. Rather than the present minimal
subset"
* tag 'mm-stable-2025-07-30-15-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (370 commits)
MAINTAINERS: add missing headers to mempory policy & migration section
MAINTAINERS: add missing file to cgroup section
MAINTAINERS: add MM MISC section, add missing files to MISC and CORE
MAINTAINERS: add missing zsmalloc file
MAINTAINERS: add missing files to page alloc section
MAINTAINERS: add missing shrinker files
MAINTAINERS: move memremap.[ch] to hotplug section
MAINTAINERS: add missing mm_slot.h file THP section
MAINTAINERS: add missing interval_tree.c to memory mapping section
MAINTAINERS: add missing percpu-internal.h file to per-cpu section
mm/page_alloc: remove trace_mm_alloc_contig_migrate_range_info()
selftests/damon: introduce _common.sh to host shared function
selftests/damon/sysfs.py: test runtime reduction of DAMON parameters
selftests/damon/sysfs.py: test non-default parameters runtime commit
selftests/damon/sysfs.py: generalize DAMON context commit assertion
selftests/damon/sysfs.py: generalize monitoring attributes commit assertion
selftests/damon/sysfs.py: generalize DAMOS schemes commit assertion
selftests/damon/sysfs.py: test DAMOS filters commitment
selftests/damon/sysfs.py: generalize DAMOS scheme commit assertion
selftests/damon/sysfs.py: test DAMOS destinations commitment
...
|
||
|
Linus Torvalds
|
90a871f74b |
ftrace changes for v6.17:
- Keep track of when fgraph_ops are registered or not Keep accounting of when fgraph_ops are registered as if a fgraph_ops is registered twice it can mess up the accounting and it will not work as expected later. Trigger a warning if something registers it twice as to catch bugs before they are found by things just not working as expected. - Make DYNAMIC_FTRACE always enabled for architectures that support it As static ftrace (where all functions are always traced) is very expensive and only exists to help architectures support ftrace, do not make it an option. As soon as an architecture supports DYNAMIC_FTRACE make it use it. This simplifies the code. - Remove redundant config HAVE_FTRACE_MCOUNT_RECORD The CONFIG_HAVE_FTRACE_MCOUNT was added to help simplify the DYNAMIC_FTRACE work, but now every architecture that implements DYNAMIC_FTRACE also has HAVE_FTRACE_MCOUNT set too, making it redundant with the HAVE_DYNAMIC_FTRACE. - Make pid_ptr string size match the comment In print_graph_proc() the pid_ptr string is of size 11, but the comment says /* sign + log10(MAX_INT) + '\0' */ which is actually 12. -----BEGIN PGP SIGNATURE----- iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaIkVkRQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qmdxAPsGcyT/gnyX/wf70cI63QoODrlRAd7M tg3R0J0H41U05QD/apttbA9GSdZ8bDLLSFAXTJgr8f4GvYvbUsmu2sMBBA8= =gd9V -----END PGP SIGNATURE----- Merge tag 'ftrace-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull ftrace updates from Steven Rostedt: - Keep track of when fgraph_ops are registered or not Keep accounting of when fgraph_ops are registered as if a fgraph_ops is registered twice it can mess up the accounting and it will not work as expected later. Trigger a warning if something registers it twice as to catch bugs before they are found by things just not working as expected. - Make DYNAMIC_FTRACE always enabled for architectures that support it As static ftrace (where all functions are always traced) is very expensive and only exists to help architectures support ftrace, do not make it an option. As soon as an architecture supports DYNAMIC_FTRACE make it use it. This simplifies the code. - Remove redundant config HAVE_FTRACE_MCOUNT_RECORD The CONFIG_HAVE_FTRACE_MCOUNT was added to help simplify the DYNAMIC_FTRACE work, but now every architecture that implements DYNAMIC_FTRACE also has HAVE_FTRACE_MCOUNT set too, making it redundant with the HAVE_DYNAMIC_FTRACE. - Make pid_ptr string size match the comment In print_graph_proc() the pid_ptr string is of size 11, but the comment says /* sign + log10(MAX_INT) + '\0' */ which is actually 12. * tag 'ftrace-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing: Remove redundant config HAVE_FTRACE_MCOUNT_RECORD ftrace: Make DYNAMIC_FTRACE always enabled for architectures that support it fgraph: Keep track of when fgraph_ops are registered or not fgraph: Make pid_str size match the comment |
||
|
Linus Torvalds
|
a578dd095d |
CRC updates for 6.17
Updates for the kernel's CRC (cyclic redundancy check) code:
- Reorganize the architecture-optimized CRC code. It now lives in
lib/crc/$(SRCARCH)/ rather than arch/$(SRCARCH)/lib/, and it is no
longer artificially split into separate generic and arch modules.
This allows better inlining and dead code elimination. The generic
CRC code is also no longer exported, simplifying the API. (This
mirrors the similar changes to SHA-1 and SHA-2 in lib/crypto/,
which can be found in the "Crypto library updates" pull request.)
- Improve crc32c() performance on newer x86_64 CPUs on long messages
by enabling the VPCLMULQDQ optimized code.
- Simplify the crypto_shash wrappers for crc32_le() and crc32c().
Register just one shash algorithm for each that uses the (fully
optimized) library functions, instead of unnecessarily providing
direct access to the generic CRC code.
- Remove unused and obsolete drivers for hardware CRC engines.
- Remove CRC-32 combination functions that are no longer used.
- Add kerneldoc for crc32_le(), crc32_be(), and crc32c().
- Convert the crc32() macro to an inline function.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCaIZ8rRQcZWJpZ2dlcnNA
a2VybmVsLm9yZwAKCRDzXCl4vpKOK3yOAP9OuoCirD42ZHNSgQeGTzhhZ2jCHiPN
BPvHChwtE2MSRwEA0ddNX36aOiEKmpjog3TMllOIBz7wBrwZV7KgoX75+AU=
=uAY8
-----END PGP SIGNATURE-----
Merge tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull CRC updates from Eric Biggers:
- Reorganize the architecture-optimized CRC code
It now lives in lib/crc/$(SRCARCH)/ rather than arch/$(SRCARCH)/lib/,
and it is no longer artificially split into separate generic and arch
modules. This allows better inlining and dead code elimination
The generic CRC code is also no longer exported, simplifying the API.
(This mirrors the similar changes to SHA-1 and SHA-2 in lib/crypto/,
which can be found in the "Crypto library updates" pull request)
- Improve crc32c() performance on newer x86_64 CPUs on long messages by
enabling the VPCLMULQDQ optimized code
- Simplify the crypto_shash wrappers for crc32_le() and crc32c()
Register just one shash algorithm for each that uses the (fully
optimized) library functions, instead of unnecessarily providing
direct access to the generic CRC code
- Remove unused and obsolete drivers for hardware CRC engines
- Remove CRC-32 combination functions that are no longer used
- Add kerneldoc for crc32_le(), crc32_be(), and crc32c()
- Convert the crc32() macro to an inline function
* tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (26 commits)
lib/crc: x86/crc32c: Enable VPCLMULQDQ optimization where beneficial
lib/crc: x86: Reorganize crc-pclmul static_call initialization
lib/crc: crc64: Add include/linux/crc64.h to kernel-api.rst
lib/crc: crc32: Change crc32() from macro to inline function and remove cast
nvmem: layouts: Switch from crc32() to crc32_le()
lib/crc: crc32: Document crc32_le(), crc32_be(), and crc32c()
lib/crc: Explicitly include <linux/export.h>
lib/crc: Remove ARCH_HAS_* kconfig symbols
lib/crc: x86: Migrate optimized CRC code into lib/crc/
lib/crc: sparc: Migrate optimized CRC code into lib/crc/
lib/crc: s390: Migrate optimized CRC code into lib/crc/
lib/crc: riscv: Migrate optimized CRC code into lib/crc/
lib/crc: powerpc: Migrate optimized CRC code into lib/crc/
lib/crc: mips: Migrate optimized CRC code into lib/crc/
lib/crc: loongarch: Migrate optimized CRC code into lib/crc/
lib/crc: arm64: Migrate optimized CRC code into lib/crc/
lib/crc: arm: Migrate optimized CRC code into lib/crc/
lib/crc: Prepare for arch-optimized code in subdirs of lib/crc/
lib/crc: Move files into lib/crc/
lib/crc32: Remove unused combination support
...
|
||
|
Steven Rostedt
|
4d6d0a6263 |
tracing: Remove redundant config HAVE_FTRACE_MCOUNT_RECORD
Ftrace is tightly coupled with architecture specific code because it requires the use of trampolines written in assembly. This means that when a new feature or optimization is made, it must be done for all architectures. To simplify the approach, CONFIG_HAVE_FTRACE_* configs are added to denote which architecture has the new enhancement so that other architectures can still function until they too have been updated. The CONFIG_HAVE_FTRACE_MCOUNT was added to help simplify the DYNAMIC_FTRACE work, but now every architecture that implements DYNAMIC_FTRACE also has HAVE_FTRACE_MCOUNT set too, making it redundant with the HAVE_DYNAMIC_FTRACE. Remove the HAVE_FTRACE_MCOUNT config and use DYNAMIC_FTRACE directly where applicable. Link: https://lore.kernel.org/all/20250703154916.48e3ada7@gandalf.local.home/ Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/20250704104838.27a18690@gandalf.local.home Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Kees Cook
|
57fbad15c2 |
stackleak: Rename STACKLEAK to KSTACK_ERASE
In preparation for adding Clang sanitizer coverage stack depth tracking that can support stack depth callbacks: - Add the new top-level CONFIG_KSTACK_ERASE option which will be implemented either with the stackleak GCC plugin, or with the Clang stack depth callback support. - Rename CONFIG_GCC_PLUGIN_STACKLEAK as needed to CONFIG_KSTACK_ERASE, but keep it for anything specific to the GCC plugin itself. - Rename all exposed "STACKLEAK" names and files to "KSTACK_ERASE" (named for what it does rather than what it protects against), but leave as many of the internals alone as possible to avoid even more churn. While here, also split "prev_lowest_stack" into CONFIG_KSTACK_ERASE_METRICS, since that's the only place it is referenced from. Suggested-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20250717232519.2984886-1-kees@kernel.org Signed-off-by: Kees Cook <kees@kernel.org> |
||
|
Alistair Popple
|
d438d27341 |
mm: remove devmap related functions and page table bits
Now that DAX and all other reference counts to ZONE_DEVICE pages are managed normally there is no need for the special devmap PTE/PMD/PUD page table bits. So drop all references to these, freeing up a software defined page table bit on architectures supporting it. Link: https://lkml.kernel.org/r/6389398c32cc9daa3dfcaa9f79c7972525d310ce.1750323463.git-series.apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Acked-by: Will Deacon <will@kernel.org> # arm64 Acked-by: David Hildenbrand <david@redhat.com> Suggested-by: Chunyan Zhang <zhang.lyra@gmail.com> Reviewed-by: Björn Töpel <bjorn@rivosinc.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Cc: Balbir Singh <balbirs@nvidia.com> Cc: Björn Töpel <bjorn@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Deepak Gupta <debug@rivosinc.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Inki Dae <m.szyprowski@samsung.com> Cc: John Groves <john@groves.net> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Eric Biggers
|
b10d2d20d9 |
lib/crc: loongarch: Migrate optimized CRC code into lib/crc/
Move the loongarch-optimized CRC code from arch/loongarch/lib/crc* into its new location in lib/crc/loongarch/, and wire it up in the new way. This new way of organizing the CRC code eliminates the need to artificially split the code for each CRC variant into separate arch and generic modules, enabling better inlining and dead code elimination. For more details, see "lib/crc: Prepare for arch-optimized code in subdirs of lib/crc/". Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: "Jason A. Donenfeld" <Jason@zx2c4.com> Link: https://lore.kernel.org/r/20250607200454.73587-6-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@kernel.org> |
||
|
Huacai Chen
|
a24f2fb70c |
LoongArch: Introduce the numa_memblks conversion
Commit
|
||
|
Huacai Chen
|
9559d58063 |
LoongArch: Increase max supported CPUs up to 2048
Increase max supported CPUs up to 2048, including:
1. Increase CSR.CPUID register's effective width;
2. Define MAX_CORE_PIC (a.k.a. max physical ID) to 2048;
3. Allow NR_CPUS (a.k.a. max logical ID) to be as large as 2048;
4. Introduce acpi_numa_x2apic_affinity_init() to handle ACPI SRAT
for CPUID >= 256.
Note: The reason of increasing to 2048 rather than 4096/8192 is because
the IPI hardware can only support 2048 as a maximum.
Reviewed-by: Yanteng Si <si.yanteng@linux.dev>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
||
|
Youling Tang
|
a45728fd41 |
LoongArch: Enable HAVE_ARCH_STACKLEAK
Add support for the stackleak feature. It initializes the stack with the
poison value before returning from system calls which improves the kernel
security.
At the same time, disables the plugin in EFI stub code because EFI stub
is out of scope for the protection.
Tested on Loongson-3A5000 (enable GCC_PLUGIN_STACKLEAK and LKDTM):
# echo STACKLEAK_ERASING > /sys/kernel/debug/provoke-crash/DIRECT
# dmesg
lkdtm: Performing direct entry STACKLEAK_ERASING
lkdtm: stackleak stack usage:
high offset: 320 bytes
current: 448 bytes
lowest: 1264 bytes
tracked: 1264 bytes
untracked: 208 bytes
poisoned: 14528 bytes
low offset: 64 bytes
lkdtm: OK: the rest of the thread stack is properly erased
Signed-off-by: Youling Tang <tangyouling@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
||
|
Yuli Wang
|
b37981ce54 |
LoongArch: Enable ARCH_SUPPORTS_MSEAL_SYSTEM_MAPPINGS
Provide support for CONFIG_MSEAL_SYSTEM_MAPPINGS on LoongArch, covering the vdso. Link: https://lore.kernel.org/all/25bad37f-273e-4626-999c-e1890be96182@lucifer.local/ Acked-by: Liam R. Howlett <Liam.Howlett@oracle.com> Acked-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Reviewed-by: Jeff Xu <jeffxu@chromium.org> Tested-by: Yuli Wang <wangyuli@uniontech.com> Signed-off-by: Yuli Wang <wangyuli@uniontech.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Tianyang Zhang
|
93f4373156 |
LoongArch: Add SCHED_MC (Multi-core scheduler) support
In order to achieve more reasonable load balancing behavior, add SCHED_MC (Multi-core scheduler) support. The LLC distribution of LoongArch now is consistent with NUMA node, the balancing domain of SCHED_MC can effectively reduce the situation where processes are awakened to smt_sibling. Co-developed-by: Hongliang Wang <wanghongliang@loongson.cn> Signed-off-by: Hongliang Wang <wanghongliang@loongson.cn> Signed-off-by: Tianyang Zhang <zhangtianyang@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Yuli Wang
|
fb8e9f59d6 |
LoongArch: Select ARCH_USE_MEMTEST
As of commit |
||
|
Linus Torvalds
|
1c241cba19 |
LoongArch changes for v6.15
1, Add jump table support for objtool; 2, Always select HAVE_VIRT_CPU_ACCOUNTING_GEN; 3, Enable UBSAN (Undefined Behavior Sanitizer); 4, Increase MAX_IO_PICS up to 8; 5, Increase ARCH_DMA_MINALIGN up to 16; 6, Fix and improve BPF JIT; 7, Fix and improve vDSO implementation; 8, Update the default config file; 9, Some bug fixes and other small changes. -----BEGIN PGP SIGNATURE----- iQJKBAABCAA0FiEEzOlt8mkP+tbeiYy5AoYrw/LiJnoFAmfpIOoWHGNoZW5odWFj YWlAa2VybmVsLm9yZwAKCRAChivD8uImehgBD/4zyWfVImn3H+2JFavzROyIdi/e Bx5PNePi+u2sIqDMc15URvxgfi7fUrRPgYYYuk2+lqLITAvdhq4FZdxhUIaWX+Tv Fn+MLck/AcXNn5jaQ8VZ7BC9xD6JG59+zcCKAHD9xiM5fmFD+rCj9PBMtYsVq/K9 EifMfudfUGLodZno2uY75Ee61ZwLDpLEJbIzrY+IPzE9KFWTsehAvZlLGZ8/y+CD CsYUxQpFjoi5Ge1O/iFyvM2lPI8YukhJjC25nR+14ClS2WrbKIDo3Nn/+Ey8+W92 z1k/8ftc57L+lMtLE0G/3vC++qw+U22RLT+w6CGA7BJpDZodfRE/1FADTEdW3xsE G0L2TjHNWnYradiK4M1kGd2tbQZz/Qyv6nPyUbqRw7Ok+axvCgxk3zNWdmiKK8Ld kG6nQUUV5hHd+zhpEQ4zD/U6ULM6Rl3UNNppld6ouN3oJLAwrVDL3mFwVq7zagRZ lvoFA1V9zJcrnfThRPIwmh25LkmEcrf5Y5SOggVeKK4GF3tB1sge8gV99UG8+om+ zVSeI65VytPafTfdqJlna1yt0ql/hvxgXWDcgmN2mIUZpbcBdJllLqF+ANbedCgs KRIGt7NuWCfAxDXavG5ShE6W0GqBwsBSapqcNu+KQK9nBK7cF28C0tkWJubTcrA3 SNqhZKdnalwQVdEnYA== =9xTj -----END PGP SIGNATURE----- Merge tag 'loongarch-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch updates from Huacai Chen: - Always select HAVE_VIRT_CPU_ACCOUNTING_GEN - Enable UBSAN (Undefined Behavior Sanitizer) - Increase MAX_IO_PICS up to 8 - Increase ARCH_DMA_MINALIGN up to 16 - Fix and improve BPF JIT - Fix and improve vDSO implementation - Update the default config file - Some bug fixes and other small changes * tag 'loongarch-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: LoongArch: Update Loongson-3 default config file LoongArch: vDSO: Make use of the t8 register for vgetrandom-chacha LoongArch: vDSO: Remove --hash-style=sysv LoongArch: BPF: Don't override subprog's return value LoongArch: BPF: Use move_addr() for BPF_PSEUDO_FUNC LoongArch: BPF: Fix off-by-one error in build_prologue() LoongArch: Rework the arch_kgdb_breakpoint() implementation LoongArch: Fix device node refcount leak in fdt_cpu_clk_init() LoongArch: Increase ARCH_DMA_MINALIGN up to 16 LoongArch: Increase MAX_IO_PICS up to 8 LoongArch: Fix help text of CMDLINE_EXTEND in Kconfig LoongArch: Enable UBSAN (Undefined Behavior Sanitizer) LoongArch: Always select HAVE_VIRT_CPU_ACCOUNTING_GEN rust: Fix enabling Rust and building with GCC for LoongArch |
||
|
谢致邦 (XIE Zhibang)
|
be216cbc1d |
LoongArch: Fix help text of CMDLINE_EXTEND in Kconfig
It is the built-in command line appended to the bootloader command line,
not the bootloader command line appended to the built-in command line.
Fixes:
|
||
|
Yuli Wang
|
892a796341 |
LoongArch: Enable UBSAN (Undefined Behavior Sanitizer)
Select ARCH_HAS_UBSAN in order to allow the user to enable CONFIG_UBSAN and instrument the entire kernel for ubsan checks. Co-developed-by: Wentao Guan <guanwentao@uniontech.com> Signed-off-by: Wentao Guan <guanwentao@uniontech.com> Signed-off-by: Yuli Wang <wangyuli@uniontech.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Bibo Mao
|
08dac3b83a |
LoongArch: Always select HAVE_VIRT_CPU_ACCOUNTING_GEN
Option HAVE_VIRT_CPU_ACCOUNTING_GEN is selected by default for 64bit system in kconfig file arch/Kconfig. There is another selection in file arch/loongarch/Kconfig if SMP is not selected. Indeed this option is SMP-safe so it brings out some misunderstanding for non-SMP case. Here always select option HAVE_VIRT_CPU_ACCOUNTING_GEN for future possible 32bit system (it is also 32bit-safe because we no longer use cputime_t). Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Linus Torvalds
|
317a76a996 |
Updates for the VDSO infrastructure:
- Consolidate the VDSO storage
The VDSO data storage and data layout has been largely architecture
specific for historical reasons. That increases the maintenance effort
and causes inconsistencies over and over.
There is no real technical reason for architecture specific layouts and
implementations. The architecture specific details can easily be
integrated into a generic layout, which also reduces the amount of
duplicated code for managing the mappings.
Convert all architectures over to a unified layout and common mapping
infrastructure. This splits the VDSO data layout into subsystem
specific blocks, timekeeping, random and architecture parts, which
provides a better structure and allows to improve and update the
functionalities without conflict and interaction.
- Rework the timekeeping data storage
The current implementation is designed for exposing system timekeeping
accessors, which was good enough at the time when it was designed.
PTP and Time Sensitive Networking (TSN) change that as there are
requirements to expose independent PTP clocks, which are not related to
system timekeeping.
Replace the monolithic data storage by a structured layout, which
allows to add support for independent PTP clocks on top while reusing
both the data structures and the time accessor implementations.
-----BEGIN PGP SIGNATURE-----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=rwei
-----END PGP SIGNATURE-----
Merge tag 'timers-vdso-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull VDSO infrastructure updates from Thomas Gleixner:
- Consolidate the VDSO storage
The VDSO data storage and data layout has been largely architecture
specific for historical reasons. That increases the maintenance
effort and causes inconsistencies over and over.
There is no real technical reason for architecture specific layouts
and implementations. The architecture specific details can easily be
integrated into a generic layout, which also reduces the amount of
duplicated code for managing the mappings.
Convert all architectures over to a unified layout and common mapping
infrastructure. This splits the VDSO data layout into subsystem
specific blocks, timekeeping, random and architecture parts, which
provides a better structure and allows to improve and update the
functionalities without conflict and interaction.
- Rework the timekeeping data storage
The current implementation is designed for exposing system
timekeeping accessors, which was good enough at the time when it was
designed.
PTP and Time Sensitive Networking (TSN) change that as there are
requirements to expose independent PTP clocks, which are not related
to system timekeeping.
Replace the monolithic data storage by a structured layout, which
allows to add support for independent PTP clocks on top while reusing
both the data structures and the time accessor implementations.
* tag 'timers-vdso-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (55 commits)
sparc/vdso: Always reject undefined references during linking
x86/vdso: Always reject undefined references during linking
vdso: Rework struct vdso_time_data and introduce struct vdso_clock
vdso: Move architecture related data before basetime data
powerpc/vdso: Prepare introduction of struct vdso_clock
arm64/vdso: Prepare introduction of struct vdso_clock
x86/vdso: Prepare introduction of struct vdso_clock
time/namespace: Prepare introduction of struct vdso_clock
vdso/namespace: Rename timens_setup_vdso_data() to reflect new vdso_clock struct
vdso/vsyscall: Prepare introduction of struct vdso_clock
vdso/gettimeofday: Prepare helper functions for introduction of struct vdso_clock
vdso/gettimeofday: Prepare do_coarse_timens() for introduction of struct vdso_clock
vdso/gettimeofday: Prepare do_coarse() for introduction of struct vdso_clock
vdso/gettimeofday: Prepare do_hres_timens() for introduction of struct vdso_clock
vdso/gettimeofday: Prepare do_hres() for introduction of struct vdso_clock
vdso/gettimeofday: Prepare introduction of struct vdso_clock
vdso/helpers: Prepare introduction of struct vdso_clock
vdso/datapage: Define vdso_clock to prepare for multiple PTP clocks
vdso: Make vdso_time_data cacheline aligned
arm64: Make asm/cache.h compatible with vDSO
...
|
||
|
Tiezhu Yang
|
e20ab7d454 |
LoongArch: Enable jump table for objtool
For now, it is time to remove -fno-jump-tables to enable jump table for objtool if the compiler has -mannotate-tablejump, otherwise it is better to remain -fno-jump-tables to keep compatibility with older compilers. Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Link: https://lore.kernel.org/r/20241217010905.13054-8-yangtiezhu@loongson.cn Acked-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org> |
||
|
Thomas Weißschuh
|
d2862bb9d9 |
LoongArch: vDSO: Switch to generic storage implementation
The generic storage implementation provides the same features as the custom one. However it can be shared between architectures, making maintenance easier. Co-developed-by: Nam Cao <namcao@linutronix.de> Signed-off-by: Nam Cao <namcao@linutronix.de> Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/20250204-vdso-store-rng-v3-10-13a4669dfc8c@linutronix.de |
||
|
Linus Torvalds
|
9ff28f2fad |
LoongArch changes for v6.14
1, Migrate to the generic rule for built-in DTB;
2, Disable FIX_EARLYCON_MEM when ARCH_IOREMAP is enabled;
3, Derive timer max_delta from PRCFG1's timer_bits;
4, Correct the cacheinfo sharing information;
5, Add pgprot_nx() implementation;
6, Add debugfs entries to switch SFB/TSO state;
7, Change the maximum number of watchpoints;
8, Some bug fixes and other small changes.
-----BEGIN PGP SIGNATURE-----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=dfxU
-----END PGP SIGNATURE-----
Merge tag 'loongarch-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Migrate to the generic rule for built-in DTB
- Disable FIX_EARLYCON_MEM when ARCH_IOREMAP is enabled
- Derive timer max_delta from PRCFG1's timer_bits
- Correct the cacheinfo sharing information
- Add pgprot_nx() implementation
- Add debugfs entries to switch SFB/TSO state
- Change the maximum number of watchpoints
- Some bug fixes and other small changes
* tag 'loongarch-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: Extend the maximum number of watchpoints
LoongArch: Change 8 to 14 for LOONGARCH_MAX_{BRP,WRP}
LoongArch: Add debugfs entries to switch SFB/TSO state
LoongArch: Fix warnings during S3 suspend
LoongArch: Adjust SETUP_SLEEP and SETUP_WAKEUP
LoongArch: Refactor bug_handler() implementation
LoongArch: Add pgprot_nx() implementation
LoongArch: Correct the __switch_to() prototype in comments
LoongArch: Correct the cacheinfo sharing information
LoongArch: Derive timer max_delta from PRCFG1's timer_bits
LoongArch: Disable FIX_EARLYCON_MEM when ARCH_IOREMAP is enabled
LoongArch: Migrate to the generic rule for built-in DTB
|
||
|
Jiaxun Yang
|
341cf992d3 |
LoongArch: Disable FIX_EARLYCON_MEM when ARCH_IOREMAP is enabled
When ARCH_IOREMAP is enabled, we are using always accessible DMW for ioremap(). It makes no sense to create a dedicated mapping for earlycon given that we can access the region via DMW. Disable FIX_EARLYCON_MEM when ARCH_IOREMAP is selected. This can ease debugging for early mapping issues. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Masahiro Yamada
|
c91ddab579 |
LoongArch: Migrate to the generic rule for built-in DTB
Commit
|
||
|
Linus Torvalds
|
37b33c68b0 |
CRC updates for 6.14
- Reorganize the architecture-optimized CRC32 and CRC-T10DIF code to be directly accessible via the library API, instead of requiring the crypto API. This is much simpler and more efficient. - Convert some users such as ext4 to use the CRC32 library API instead of the crypto API. More conversions like this will come later. - Add a KUnit test that tests and benchmarks multiple CRC variants. Remove older, less-comprehensive tests that are made redundant by this. - Add an entry to MAINTAINERS for the kernel's CRC library code. I'm volunteering to maintain it. I have additional cleanups and optimizations planned for future cycles. These patches have been in linux-next since -rc1. -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCZ418ZRQcZWJpZ2dlcnNA Z29vZ2xlLmNvbQAKCRDzXCl4vpKOKyJYAP9kBlpm8W9/XY6N8SpjKaXE/vKQYHQl Nobhak06Us8uJwEAkcUTymWP4IwQj5A9jgBAPRw53FQcNVKIc+01C7gRHw0= =mqSH -----END PGP SIGNATURE----- Merge tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux Pull CRC updates from Eric Biggers: - Reorganize the architecture-optimized CRC32 and CRC-T10DIF code to be directly accessible via the library API, instead of requiring the crypto API. This is much simpler and more efficient. - Convert some users such as ext4 to use the CRC32 library API instead of the crypto API. More conversions like this will come later. - Add a KUnit test that tests and benchmarks multiple CRC variants. Remove older, less-comprehensive tests that are made redundant by this. - Add an entry to MAINTAINERS for the kernel's CRC library code. I'm volunteering to maintain it. I have additional cleanups and optimizations planned for future cycles. * tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (31 commits) MAINTAINERS: add entry for CRC library powerpc/crc: delete obsolete crc-vpmsum_test.c lib/crc32test: delete obsolete crc32test.c lib/crc16_kunit: delete obsolete crc16_kunit.c lib/crc_kunit.c: add KUnit test suite for CRC library functions powerpc/crc-t10dif: expose CRC-T10DIF function through lib arm64/crc-t10dif: expose CRC-T10DIF function through lib arm/crc-t10dif: expose CRC-T10DIF function through lib x86/crc-t10dif: expose CRC-T10DIF function through lib crypto: crct10dif - expose arch-optimized lib function lib/crc-t10dif: add support for arch overrides lib/crc-t10dif: stop wrapping the crypto API scsi: target: iscsi: switch to using the crc32c library f2fs: switch to using the crc32 library jbd2: switch to using the crc32c library ext4: switch to using the crc32c library lib/crc32: make crc32c() go directly to lib bcachefs: Explicitly select CRYPTO from BCACHEFS_FS x86/crc32: expose CRC32 functions through lib x86/crc32: update prototype for crc32_pclmul_le_16() ... |
||
|
Linus Torvalds
|
2e04247f7c |
ftrace updates for v6.14:
- Have fprobes built on top of function graph infrastructure The fprobe logic is an optimized kprobe that uses ftrace to attach to functions when a probe is needed at the start or end of the function. The fprobe and kretprobe logic implements a similar method as the function graph tracer to trace the end of the function. That is to hijack the return address and jump to a trampoline to do the trace when the function exits. To do this, a shadow stack needs to be created to store the original return address. Fprobes and function graph do this slightly differently. Fprobes (and kretprobes) has slots per callsite that are reserved to save the return address. This is fine when just a few points are traced. But users of fprobes, such as BPF programs, are starting to add many more locations, and this method does not scale. The function graph tracer was created to trace all functions in the kernel. In order to do this, when function graph tracing is started, every task gets its own shadow stack to hold the return address that is going to be traced. The function graph tracer has been updated to allow multiple users to use its infrastructure. Now have fprobes be one of those users. This will also allow for the fprobe and kretprobe methods to trace the return address to become obsolete. With new technologies like CFI that need to know about these methods of hijacking the return address, going toward a solution that has only one method of doing this will make the kernel less complex. - Cleanup with guard() and free() helpers There were several places in the code that had a lot of "goto out" in the error paths to either unlock a lock or free some memory that was allocated. But this is error prone. Convert the code over to use the guard() and free() helpers that let the compiler unlock locks or free memory when the function exits. - Remove disabling of interrupts in the function graph tracer When function graph tracer was first introduced, it could race with interrupts and NMIs. To prevent that race, it would disable interrupts and not trace NMIs. But the code has changed to allow NMIs and also interrupts. This change was done a long time ago, but the disabling of interrupts was never removed. Remove the disabling of interrupts in the function graph tracer is it is not needed. This greatly improves its performance. - Allow the :mod: command to enable tracing module functions on the kernel command line. The function tracer already has a way to enable functions to be traced in modules by writing ":mod:<module>" into set_ftrace_filter. That will enable either all the functions for the module if it is loaded, or if it is not, it will cache that command, and when the module is loaded that matches <module>, its functions will be enabled. This also allows init functions to be traced. But currently events do not have that feature. Because enabling function tracing can be done very early at boot up (before scheduling is enabled), the commands that can be done when function tracing is started is limited. Having the ":mod:" command to trace module functions as they are loaded is very useful. Update the kernel command line function filtering to allow it. -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ42E2RQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qqXSAPwOMxuhye8tb1GYG62QD9+w7e6nOmlC 2GCPj4detnEM2QD/ciivkhespVKhHpZHRewAuSnJgHPSM45NQ3EVESzjWQ4= =snbx -----END PGP SIGNATURE----- Merge tag 'ftrace-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull ftrace updates from Steven Rostedt: - Have fprobes built on top of function graph infrastructure The fprobe logic is an optimized kprobe that uses ftrace to attach to functions when a probe is needed at the start or end of the function. The fprobe and kretprobe logic implements a similar method as the function graph tracer to trace the end of the function. That is to hijack the return address and jump to a trampoline to do the trace when the function exits. To do this, a shadow stack needs to be created to store the original return address. Fprobes and function graph do this slightly differently. Fprobes (and kretprobes) has slots per callsite that are reserved to save the return address. This is fine when just a few points are traced. But users of fprobes, such as BPF programs, are starting to add many more locations, and this method does not scale. The function graph tracer was created to trace all functions in the kernel. In order to do this, when function graph tracing is started, every task gets its own shadow stack to hold the return address that is going to be traced. The function graph tracer has been updated to allow multiple users to use its infrastructure. Now have fprobes be one of those users. This will also allow for the fprobe and kretprobe methods to trace the return address to become obsolete. With new technologies like CFI that need to know about these methods of hijacking the return address, going toward a solution that has only one method of doing this will make the kernel less complex. - Cleanup with guard() and free() helpers There were several places in the code that had a lot of "goto out" in the error paths to either unlock a lock or free some memory that was allocated. But this is error prone. Convert the code over to use the guard() and free() helpers that let the compiler unlock locks or free memory when the function exits. - Remove disabling of interrupts in the function graph tracer When function graph tracer was first introduced, it could race with interrupts and NMIs. To prevent that race, it would disable interrupts and not trace NMIs. But the code has changed to allow NMIs and also interrupts. This change was done a long time ago, but the disabling of interrupts was never removed. Remove the disabling of interrupts in the function graph tracer is it is not needed. This greatly improves its performance. - Allow the :mod: command to enable tracing module functions on the kernel command line. The function tracer already has a way to enable functions to be traced in modules by writing ":mod:<module>" into set_ftrace_filter. That will enable either all the functions for the module if it is loaded, or if it is not, it will cache that command, and when the module is loaded that matches <module>, its functions will be enabled. This also allows init functions to be traced. But currently events do not have that feature. Because enabling function tracing can be done very early at boot up (before scheduling is enabled), the commands that can be done when function tracing is started is limited. Having the ":mod:" command to trace module functions as they are loaded is very useful. Update the kernel command line function filtering to allow it. * tag 'ftrace-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (26 commits) ftrace: Implement :mod: cache filtering on kernel command line tracing: Adopt __free() and guard() for trace_fprobe.c bpf: Use ftrace_get_symaddr() for kprobe_multi probes ftrace: Add ftrace_get_symaddr to convert fentry_ip to symaddr Documentation: probes: Update fprobe on function-graph tracer selftests/ftrace: Add a test case for repeating register/unregister fprobe selftests: ftrace: Remove obsolate maxactive syntax check tracing/fprobe: Remove nr_maxactive from fprobe fprobe: Add fprobe_header encoding feature fprobe: Rewrite fprobe on function-graph tracer s390/tracing: Enable HAVE_FTRACE_GRAPH_FUNC ftrace: Add CONFIG_HAVE_FTRACE_GRAPH_FUNC bpf: Enable kprobe_multi feature if CONFIG_FPROBE is enabled tracing/fprobe: Enable fprobe events with CONFIG_DYNAMIC_FTRACE_WITH_ARGS tracing: Add ftrace_fill_perf_regs() for perf event tracing: Add ftrace_partial_regs() for converting ftrace_regs to pt_regs fprobe: Use ftrace_regs in fprobe exit handler fprobe: Use ftrace_regs in fprobe entry handler fgraph: Pass ftrace_regs to retfunc fgraph: Replace fgraph_ret_regs with ftrace_regs ... |
||
|
Zhao Qunqin
|
558aff7a63 |
EDAC: Add an EDAC driver for the Loongson memory controller
Add ECC support for Loongson SoC DDR controller. This driver reports single bit errors (CE) only. Only ACPI firmware is supported. [ bp: Document what last_ce_count is for. ] Signed-off-by: Zhao Qunqin <zhaoqunqin@loongson.cn> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Huacai Chen <chenhuacai@loongson.cn> Link: https://lore.kernel.org/r/20241219124846.1876-1-zhaoqunqin@loongson.cn Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> |
||
|
Masami Hiramatsu (Google)
|
a762e9267d |
ftrace: Add CONFIG_HAVE_FTRACE_GRAPH_FUNC
Add CONFIG_HAVE_FTRACE_GRAPH_FUNC kconfig in addition to ftrace_graph_func macro check. This is for the other feature (e.g. FPROBE) which requires to access ftrace_regs from fgraph_ops::entryfunc() can avoid compiling if the fgraph can not pass the valid ftrace_regs. Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com> Cc: Florent Revest <revest@chromium.org> Cc: Martin KaFai Lau <martin.lau@linux.dev> Cc: bpf <bpf@vger.kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Alan Maguire <alan.maguire@oracle.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: WANG Xuerui <kernel@xen0n.name> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Naveen N Rao <naveen@kernel.org> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: x86@kernel.org Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Link: https://lore.kernel.org/173519001472.391279.1174901685282588467.stgit@devnote2 Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Masami Hiramatsu (Google)
|
762abbc0d0 |
fprobe: Use ftrace_regs in fprobe exit handler
Change the fprobe exit handler to use ftrace_regs structure instead of pt_regs. This also introduce HAVE_FTRACE_REGS_HAVING_PT_REGS which means the ftrace_regs is including the pt_regs so that ftrace_regs can provide pt_regs without memory allocation. Fprobe introduces a new dependency with that. Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Acked-by: Heiko Carstens <hca@linux.ibm.com> # s390 Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com> Cc: Florent Revest <revest@chromium.org> Cc: bpf <bpf@vger.kernel.org> Cc: Alan Maguire <alan.maguire@oracle.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: WANG Xuerui <kernel@xen0n.name> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: x86@kernel.org Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Song Liu <song@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: KP Singh <kpsingh@kernel.org> Cc: Matt Bobrowski <mattbobrowski@google.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Andrii Nakryiko <andrii@kernel.org> Cc: Martin KaFai Lau <martin.lau@linux.dev> Cc: Eduard Zingerman <eddyz87@gmail.com> Cc: Yonghong Song <yonghong.song@linux.dev> Cc: John Fastabend <john.fastabend@gmail.com> Cc: Stanislav Fomichev <sdf@fomichev.me> Cc: Hao Luo <haoluo@google.com> Cc: Andrew Morton <akpm@linux-foundation.org> Link: https://lore.kernel.org/173518995092.391279.6765116450352977627.stgit@devnote2 Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Masami Hiramatsu (Google)
|
a3ed4157b7 |
fgraph: Replace fgraph_ret_regs with ftrace_regs
Use ftrace_regs instead of fgraph_ret_regs for tracing return value on function_graph tracer because of simplifying the callback interface. The CONFIG_HAVE_FUNCTION_GRAPH_RETVAL is also replaced by CONFIG_HAVE_FUNCTION_GRAPH_FREGS. Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Acked-by: Heiko Carstens <hca@linux.ibm.com> Acked-by: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com> Cc: Florent Revest <revest@chromium.org> Cc: Martin KaFai Lau <martin.lau@linux.dev> Cc: bpf <bpf@vger.kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Alan Maguire <alan.maguire@oracle.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: WANG Xuerui <kernel@xen0n.name> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: x86@kernel.org Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Link: https://lore.kernel.org/173518991508.391279.16635322774382197642.stgit@devnote2 Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Eric Biggers
|
72f51a4f4b |
loongarch/crc32: expose CRC32 functions through lib
Move the loongarch CRC32 assembly code into the lib directory and wire it up to the library interface. This allows it to be used without going through the crypto API. It remains usable via the crypto API too via the shash algorithms that use the library interface. Thus all the arch-specific "shash" code becomes unnecessary and is removed. Note: to see the diff from arch/loongarch/crypto/crc32-loongarch.c to arch/loongarch/lib/crc32-loongarch.c, view this commit with 'git show -M10'. Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: WangYuli <wangyuli@uniontech.com> Link: https://lore.kernel.org/r/20241202010844.144356-7-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> |
||
|
Huacai Chen
|
704f06eeff |
LoongArch: Allow to enable PREEMPT_LAZY
LoongArch has supported PREEMPT_RT now. It uses GENERIC_ENTRY, so just add the TIF bit (TIF_NEED_RESCHED_LAZY) related definitions and select the Kconfig symbol (ARCH_HAS_PREEMPT_LAZY) is enough to make it go. Signed-off-by: Xi Ruoyao <xry111@xry111.site> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Huacai Chen
|
be2ea982bb |
LoongArch: Allow to enable PREEMPT_RT
It is really time. LoongArch has all the required architecture related changes, that have been identified over time, in order to enable PREEMPT_RT. With the recent printk changes, the last known road block has been addressed. Allow to enable PREEMPT_RT on LoongArch. Below are the latency data from cyclictest on a 4-core Loongson-3A5000 machine, with a "make -j8" kernel building workload in the background. 1. PREEMPT kernel with default configuration: ./cyclictest -a -t -m -i200 -d0 -p99 policy: fifo: loadavg: 8.78 8.96 8.64 10/296 64800 T: 0 ( 4592) P:99 I:200 C:14838617 Min: 3 Act: 6 Avg: 8 Max: 844 T: 1 ( 4593) P:99 I:200 C:14838765 Min: 3 Act: 9 Avg: 8 Max: 909 T: 2 ( 4594) P:99 I:200 C:14838510 Min: 3 Act: 7 Avg: 8 Max: 832 T: 3 ( 4595) P:99 I:200 C:14838631 Min: 3 Act: 8 Avg: 8 Max: 931 2. PREEMPT_RT kernel with default configuration: ./cyclictest -a -t -m -i200 -d0 -p99 policy: fifo: loadavg: 10.38 10.47 10.35 9/336 77788 T: 0 ( 3941) P:99 I:200 C:19439626 Min: 3 Act: 12 Avg: 8 Max: 227 T: 1 ( 3942) P:99 I:200 C:19439624 Min: 2 Act: 11 Avg: 8 Max: 184 T: 2 ( 3943) P:99 I:200 C:19439623 Min: 3 Act: 4 Avg: 7 Max: 223 T: 3 ( 3944) P:99 I:200 C:19439623 Min: 2 Act: 10 Avg: 7 Max: 226 3. PREEMPT_RT kernel with tuned configuration: ./cyclictest -a -t -m -i200 -d0 -p99 policy: fifo: loadavg: 10.52 10.66 10.62 12/334 109397 T: 0 ( 4765) P:99 I:200 C:29335186 Min: 3 Act: 6 Avg: 8 Max: 62 T: 1 ( 4766) P:99 I:200 C:29335185 Min: 3 Act: 10 Avg: 8 Max: 52 T: 2 ( 4767) P:99 I:200 C:29335184 Min: 3 Act: 8 Avg: 8 Max: 64 T: 3 ( 4768) P:99 I:200 C:29335183 Min: 3 Act: 12 Avg: 8 Max: 53 Main instruments of tuned configuration include: Disable the boot rom space in BIOS, in order to avoid kernel's speculative access to low- speed memory (i.e. boot rom space); Disable CPUFreq scaling; Disable RTC synchronization in the ntpd/chronyd service (also avoid other RTC accesses when running low-latency workloads). Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Huacai Chen
|
826d2af694 |
LoongArch: Select HAVE_POSIX_CPU_TIMERS_TASK_WORK
Move POSIX CPU timer expiry and signal delivery into task context to allow PREEMPT_RT setups to coexist with KVM. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Dave Vasilevsky
|
31daa34315 |
crash, powerpc: default to CRASH_DUMP=n on PPC_BOOK3S_32
Fixes boot failures on 6.9 on PPC_BOOK3S_32 machines using Open Firmware.
On these machines, the kernel refuses to boot from non-zero
PHYSICAL_START, which occurs when CRASH_DUMP is on.
Since most PPC_BOOK3S_32 machines boot via Open Firmware, it should
default to off for them. Users booting via some other mechanism can still
turn it on explicitly.
Does not change the default on any other architectures for the
time being.
Link: https://lkml.kernel.org/r/20240917163720.1644584-1-dave@vasilevsky.ca
Fixes:
|
||
|
Linus Torvalds
|
3630400697 |
LoongArch changes for v6.12
1, Fix objtool about do_syscall() and Clang; 2, Enable generic CPU vulnerabilites support; 3, Enable ACPI BGRT handling; 4, Rework CPU feature probe from CPUCFG/IOCSR; 5, Add ARCH_HAS_SET_MEMORY support; 6, Add ARCH_HAS_SET_DIRECT_MAP support; 7, Improve hardware page table walker; 8, Simplify _percpu_read() and _percpu_write(); 9, Add advanced extended IRQ model documentions; 10, Some bug fixes and other small changes. -----BEGIN PGP SIGNATURE----- iQJKBAABCAA0FiEEzOlt8mkP+tbeiYy5AoYrw/LiJnoFAmbybXsWHGNoZW5odWFj YWlAa2VybmVsLm9yZwAKCRAChivD8uImeomkEAChdhm2LxxBoUX8qn5EoUmSG041 EfJ2uJYulfbjlaCTyMJZBddWDNm2Le2Mq+LtJT5e4S7zPaLAV0FZOw5x6/fnj4GW a6sxjD35hrKXMeV9rNi1jrTG5zTUEMFA3tsQTs9+f/BGdIhQ3dvUrscRXgJgkFex v1W/18vCsSNfg58F3PG+wupKlxA69x0p/sIXtU1lqWN8RZiHFIhtW6FjVFDbiP3c NRdg1/oRI0FeEtnA+S6KJppDbXq1J5ZsEoSNTugAcpeYXBCI52N4j5CholmZ/JRw WwewCPeedS6ZQn8HlYygZlHrJEIevT9tVOoeJJhDj2Zz8LeReLZqai/Rf01hFH1T ZNx9Pwt9E4YQ6iHhYchxgDd7MNjJS8HbLHuZUC0zsA085CwPj1yimflU7r0CI1qA 8vq0hodkpvrseZw3E0JpT9Jip5sO74UK4/Zr5xjzlWy1C4oJajP+FOEcjuzen1Tn w1UIRG5prD6nL4+SoNSY8jkKjjLqLgStaovh8bkgIh8mM5DAzSgYk+6kehTVXxAB 7TPu4FNHzoP9Py3paot1I9q9pMZWS6f7B6EpmmIUF/l1HSwgSys5ivxiTbGWJrkM 6Iq3UkgNVLa8MFDHlHZ9OlQkBID3VrCEHZYvbFrJWkRFNZ/anEPTyCjtr/OehI1G HjSJKIXAr0t/tVZkqg== =JyR/ -----END PGP SIGNATURE----- Merge tag 'loongarch-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch updates from Huacai Chen: - Fix objtool about do_syscall() and Clang - Enable generic CPU vulnerabilites support - Enable ACPI BGRT handling - Rework CPU feature probe from CPUCFG/IOCSR - Add ARCH_HAS_SET_MEMORY support - Add ARCH_HAS_SET_DIRECT_MAP support - Improve hardware page table walker - Simplify _percpu_read() and _percpu_write() - Add advanced extended IRQ model documentions - Some bug fixes and other small changes * tag 'loongarch-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: Docs/LoongArch: Add advanced extended IRQ model description LoongArch: Remove posix_types.h include from sigcontext.h LoongArch: Fix memleak in pci_acpi_scan_root() LoongArch: Simplify _percpu_read() and _percpu_write() LoongArch: Improve hardware page table walker LoongArch: Add ARCH_HAS_SET_DIRECT_MAP support LoongArch: Add ARCH_HAS_SET_MEMORY support LoongArch: Rework CPU feature probe from CPUCFG/IOCSR LoongArch: Enable ACPI BGRT handling LoongArch: Enable generic CPU vulnerabilites support LoongArch: Remove STACK_FRAME_NON_STANDARD(do_syscall) LoongArch: Set AS_HAS_THIN_ADD_SUB as y if AS_IS_LLVM LoongArch: Enable objtool for Clang objtool: Handle frame pointer related instructions |
||
|
Huacai Chen
|
f04de6d8f2 |
LoongArch: Add ARCH_HAS_SET_DIRECT_MAP support
Add set_direct_map_*() functions for setting the direct map alias for
the page to its default permissions and to an invalid state that cannot
be cached in a TLB. (See
|
||
|
Huacai Chen
|
e86935f705 |
LoongArch: Add ARCH_HAS_SET_MEMORY support
Add set_memory_ro/rw/x/nx architecture hooks to change the page attribution. Use own set_memory.h rather than generic set_memory.h (i.e. include/asm-generic/set_memory.h), because we want to add other function prototypes here. Note: We can only set attributes for KVRANGE/XKVRANGE kernel addresses. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Tiezhu Yang
|
e8dd556c74 |
LoongArch: Enable generic CPU vulnerabilites support
Currently, many architectures support generic CPU vulnerabilites, such as x86, arm64 and riscv: commit |
||
|
Linus Torvalds
|
4a39ac5b7d |
Random number generator updates for Linux 6.12-rc1.
-----BEGIN PGP SIGNATURE-----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=mWCw
-----END PGP SIGNATURE-----
Merge tag 'random-6.12-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld:
"Originally I'd planned on sending each of the vDSO getrandom()
architecture ports to their respective arch trees. But as we started
to work on this, we found lots of interesting issues in the shared
code and infrastructure, the fixes for which the various archs needed
to base their work.
So in the end, this turned into a nice collaborative effort fixing up
issues and porting to 5 new architectures -- arm64, powerpc64,
powerpc32, s390x, and loongarch64 -- with everybody pitching in and
commenting on each other's code. It was a fun development cycle.
This contains:
- Numerous fixups to the vDSO selftest infrastructure, getting it
running successfully on more platforms, and fixing bugs in it.
- Additions to the vDSO getrandom & chacha selftests. Basically every
time manual review unearthed a bug in a revision of an arch patch,
or an ambiguity, the tests were augmented.
By the time the last arch was submitted for review, s390x, v1 of
the series was essentially fine right out of the gate.
- Fixes to the the generic C implementation of vDSO getrandom, to
build and run successfully on all archs, decoupling it from
assumptions we had (unintentionally) made on x86_64 that didn't
carry through to the other architectures.
- Port of vDSO getrandom to LoongArch64, from Xi Ruoyao and acked by
Huacai Chen.
- Port of vDSO getrandom to ARM64, from Adhemerval Zanella and acked
by Will Deacon.
- Port of vDSO getrandom to PowerPC, in both 32-bit and 64-bit
varieties, from Christophe Leroy and acked by Michael Ellerman.
- Port of vDSO getrandom to S390X from Heiko Carstens, the arch
maintainer.
While it'd be natural for there to be things to fix up over the course
of the development cycle, these patches got a decent amount of review
from a fairly diverse crew of folks on the mailing lists, and, for the
most part, they've been cooking in linux-next, which has been helpful
for ironing out build issues.
In terms of architectures, I think that mostly takes care of the
important 64-bit archs with hardware still being produced and running
production loads in settings where vDSO getrandom is likely to help.
Arguably there's still RISC-V left, and we'll see for 6.13 whether
they find it useful and submit a port"
* tag 'random-6.12-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: (47 commits)
selftests: vDSO: check cpu caps before running chacha test
s390/vdso: Wire up getrandom() vdso implementation
s390/vdso: Move vdso symbol handling to separate header file
s390/vdso: Allow alternatives in vdso code
s390/module: Provide find_section() helper
s390/facility: Let test_facility() generate static branch if possible
s390/alternatives: Remove ALT_FACILITY_EARLY
s390/facility: Disable compile time optimization for decompressor code
selftests: vDSO: fix vdso_config for s390
selftests: vDSO: fix ELF hash table entry size for s390x
powerpc/vdso: Wire up getrandom() vDSO implementation on VDSO64
powerpc/vdso: Wire up getrandom() vDSO implementation on VDSO32
powerpc/vdso: Refactor CFLAGS for CVDSO build
powerpc/vdso32: Add crtsavres
mm: Define VM_DROPPABLE for powerpc/32
powerpc/vdso: Fix VDSO data access when running in a non-root time namespace
selftests: vDSO: don't include generated headers for chacha test
arm64: vDSO: Wire up getrandom() vDSO implementation
arm64: alternative: make alternative_has_cap_likely() VDSO compatible
selftests: vDSO: also test counter in vdso_test_chacha
...
|
||
|
Tiezhu Yang
|
a7e0837724 |
LoongArch: Set AS_HAS_THIN_ADD_SUB as y if AS_IS_LLVM
When building kernel with "make CC=clang defconfig", LLVM Assembler is
used due to LLVM_IAS=0 is not specified, then AS_HAS_THIN_ADD_SUB is not
set, thus objtool can not be built after enable it for Clang.
config AS_HAS_THIN_ADD_SUB is to check whether -mthin-add-sub option is
available to know R_LARCH_{32,64}_PCREL are supported for GNU Assembler,
there is no such an option for LLVM Assembler. The minimal version of
Clang is 18 for building LoongArch kernel, and Clang >= 17 has already
supported R_LARCH_{32,64}_PCREL, that is to say, there is no need to
depend on AS_HAS_THIN_ADD_SUB for Clang, so just set AS_HAS_THIN_ADD_SUB
as y if AS_IS_LLVM.
Fixes:
|
||
|
Tiezhu Yang
|
b8468bd92a |
LoongArch: Enable objtool for Clang
For now, it can enable objtool for Clang, just remove !CC_IS_CLANG for HAVE_OBJTOOL in arch/loongarch/Kconfig. Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Xi Ruoyao
|
18efd0b10e |
LoongArch: vDSO: Wire up getrandom() vDSO implementation
Hook up the generic vDSO implementation to the LoongArch vDSO data page by providing the required __arch_chacha20_blocks_nostack, __arch_get_k_vdso_rng_data, and getrandom_syscall implementations. Also wire up the selftests. Signed-off-by: Xi Ruoyao <xry111@xry111.site> Acked-by: Huacai Chen <chenhuacai@kernel.org> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> |
||
|
Tianyang Zhang
|
ae16f05c92 |
irqchip/loongarch-avec: Add AVEC irqchip support
Introduce the advanced extended interrupt controllers (AVECINTC). This
feature will allow each core to have 256 independent interrupt vectors
and MSI interrupts can be independently routed to any vector on any CPU.
The whole topology of irqchips in LoongArch machines looks like this if
AVECINTC is supported:
+-----+ +-----------------------+ +-------+
| IPI | --> | CPUINTC | <-- | Timer |
+-----+ +-----------------------+ +-------+
^ ^ ^
| | |
+---------+ +----------+ +---------+ +-------+
| EIOINTC | | AVECINTC | | LIOINTC | <-- | UARTs |
+---------+ +----------+ +---------+ +-------+
^ ^
| |
+---------+ +---------+
| PCH-PIC | | PCH-MSI |
+---------+ +---------+
^ ^ ^
| | |
+---------+ +---------+ +---------+
| Devices | | PCH-LPC | | Devices |
+---------+ +---------+ +---------+
^
|
+---------+
| Devices |
+---------+
Co-developed-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Co-developed-by: Liupu Wang <wangliupu@loongson.cn>
Signed-off-by: Liupu Wang <wangliupu@loongson.cn>
Co-developed-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Tianyang Zhang <zhangtianyang@loongson.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240823104337.25577-2-zhangtianyang@loongson.cn
|
||
|
Linus Torvalds
|
c9f33436d8 |
RISC-V Patches for the 6.11 Merge Window, Part 2
* Support for NUMA (via SRAT and SLIT), console output (via SPCR), and cache info (via PPTT) on ACPI-based systems. * The trap entry/exit code no longer breaks the return address stack predictor on many systems, which results in an improvement to trap latency. * Support for HAVE_ARCH_STACKLEAK. * The sv39 linear map has been extended to support 128GiB mappings. * The frequency of the mtime CSR is now visible via hwprobe. -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAmaj2EYTHHBhbG1lckBk YWJiZWx0LmNvbQAKCRAuExnzX7sYiVG3D/9kNHTI09iPDJd6fTChE3cpMxy7xXXE URX3Avu+gYsJmIbYyg4RnQ8FGFN7icKBCrQqs7JmLliU0NU+YMcCcjsJA2QaivbD VAlaex1qNcvNGteHrpbqhr3Zs4zw8GlBkB3KFTLyPAp61bybGo0a/A5ONJ7ScQIW RWHewAPgb86cQ0Q34JpO87TqvMM0KMvhQP5dip+olaFjLRBzhXmGFZfHqA80kTWl 0ytYclVCHZMtO/5mnQpuIOVs1IKw9L4wa0sivOQF0iLTqfKDFALa6yZsThHA/w3e JVuBAdQhcPZ3fgO2fUfJPlW16GmRC2/tdiFg5NFw8k4vo7DYBwX55ztPKXqDrJDM 8ah85IeLiPar/A/uHdn6bPjK+aGMuzklKF50r62XXAc2fL8mza1sdvKCVOy2EOLn JyGI9c/10KpvN/DW8g7hPefhvbx4+tCKkFcPqf++VQha6W8cQdCKi+Li0Pm8TTnp XPQjIvSlDDG1Pl4ofgBSFoyB8pkBXNzvv8NZp+YYtnqSOLAKaZuP+KwA8TwHdvGM pdCXcL3KHiLy4/pJWEoNTutD0mbJ7PUIb2P/KkjqYDgp4F1n0Hg+/aeSIp+7a4Pv yTBctIGxrlriQMIdtWCR8tyhcPP4pDpGYkW0K15EE16G0NK0fjD89LEXYqT6ae2R C0QgiwnVe/eopg== =zeUn -----END PGP SIGNATURE----- Merge tag 'riscv-for-linus-6.11-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull more RISC-V updates from Palmer Dabbelt: - Support for NUMA (via SRAT and SLIT), console output (via SPCR), and cache info (via PPTT) on ACPI-based systems. - The trap entry/exit code no longer breaks the return address stack predictor on many systems, which results in an improvement to trap latency. - Support for HAVE_ARCH_STACKLEAK. - The sv39 linear map has been extended to support 128GiB mappings. - The frequency of the mtime CSR is now visible via hwprobe. * tag 'riscv-for-linus-6.11-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (21 commits) RISC-V: Provide the frequency of time CSR via hwprobe riscv: Extend sv39 linear mapping max size to 128G riscv: enable HAVE_ARCH_STACKLEAK riscv: signal: Remove unlikely() from WARN_ON() condition riscv: Improve exception and system call latency RISC-V: Select ACPI PPTT drivers riscv: cacheinfo: initialize cacheinfo's level and type from ACPI PPTT riscv: cacheinfo: remove the useless input parameter (node) of ci_leaf_init() RISC-V: ACPI: Enable SPCR table for console output on RISC-V riscv: boot: remove duplicated targets line trace: riscv: Remove deprecated kprobe on ftrace support riscv: cpufeature: Extract common elements from extension checking riscv: Introduce vendor variants of extension helpers riscv: Add vendor extensions to /proc/cpuinfo riscv: Extend cpufeature.c to detect vendor extensions RISC-V: run savedefconfig for defconfig RISC-V: hwprobe: sort EXT_KEY()s in hwprobe_isa_ext0() alphabetically ACPI: NUMA: replace pr_info with pr_debug in arch_acpi_numa_init ACPI: NUMA: change the ACPI_NUMA to a hidden option ACPI: NUMA: Add handler for SRAT RINTC affinity structure ... |
||
|
Linus Torvalds
|
a362ade892 |
LoongArch changes for v6.11
1, Define __ARCH_WANT_NEW_STAT in unistd.h; 2, Always enumerate MADT and setup logical-physical CPU mapping; 3, Add irq_work support via self IPIs; 4, Add RANDOMIZE_KSTACK_OFFSET support; 5, Add ARCH_HAS_PTE_DEVMAP support; 6, Add ARCH_HAS_DEBUG_VM_PGTABLE support; 7, Add writecombine support for DMW-based ioremap(); 8, Add architectural preparation for CPUFreq; 9, Add ACPI standard hardware register based S3 support; 10, Add support for relocating the kernel with RELR relocation; 11, Some bug fixes and other small changes. -----BEGIN PGP SIGNATURE----- iQJKBAABCAA0FiEEzOlt8mkP+tbeiYy5AoYrw/LiJnoFAmabzOsWHGNoZW5odWFj YWlAa2VybmVsLm9yZwAKCRAChivD8uImeqssD/9AG3WGb25R4IvgnZYuRCxpXsLk Qrj4YSPazaTLrQBWk1g+KqcBLe+jZV4zmnz0H93qoOpyMDwsmExugDug7QCKiBl1 olVZ0CeQ6dyMHAnFjTgy29KcyJRFith4jXFGq6kpNa80pezsXz7b869GkLZflZfy W9hALfcaxB4kx+z4HXblbOIsfzVwh2eBD/nkWukBG28CPMQ7pV4TtejIqSd9kDC5 LQjVQhjyrDgR3EPJEzr+48/hgFB6cZ8fmfv5JVTu+rQMngUldxDijj8xfoIUgIjN 2khFc2Orx5RVyIuBxtLKWf70HD9xXC0fqUVjFEn0Yn5i1JVLoMdqjownSWvPy3t7 z3V0E0VaYUdLgA3GeA5Fw1uZbORlocAZbA5B8bXY2foNfwPwLlGpNiyNiqx5kQmQ O+9jQJqdrZZ18wXEW8sR8AnT5+lzIQdv1GlkYt2f5a1rjMZwHtPZI4aPRDojPo/3 Fv0Q1+2XVnbPngzJJz9tlYCzt5iuY9z7DwsnbEBSiLZRapJ9ZECmJjSGnnR/fLLS ifdyooua8bviMwzmUEmfSgPRHyTZs+BjkD7AQ4xyRDAv0T2d9sDwkAWYBcViTslF awe6+x+zn6yXekhiloN8L+3HJ67bYojXmLciNqvFcVtSNgJQpXBjLDO9orCbNqmw ISxNA0GbR+eWGMdvCA== =bla1 -----END PGP SIGNATURE----- Merge tag 'loongarch-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch updates from Huacai Chen: - Define __ARCH_WANT_NEW_STAT in unistd.h - Always enumerate MADT and setup logical-physical CPU mapping - Add irq_work support via self IPIs - Add RANDOMIZE_KSTACK_OFFSET support - Add ARCH_HAS_PTE_DEVMAP support - Add ARCH_HAS_DEBUG_VM_PGTABLE support - Add writecombine support for DMW-based ioremap() - Add architectural preparation for CPUFreq - Add ACPI standard hardware register based S3 support - Add support for relocating the kernel with RELR relocation - Some bug fixes and other small changes * tag 'loongarch-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: LoongArch: Make the users of larch_insn_gen_break() constant LoongArch: Check TIF_LOAD_WATCH to enable user space watchpoint LoongArch: Use rustc option -Zdirect-access-external-data LoongArch: Add support for relocating the kernel with RELR relocation LoongArch: Remove a redundant checking in relocator LoongArch: Use correct API to map cmdline in relocate_kernel() LoongArch: Automatically disable KASLR for hibernation LoongArch: Add ACPI standard hardware register based S3 support LoongArch: Add architectural preparation for CPUFreq LoongArch: Add writecombine support for DMW-based ioremap() LoongArch: Add ARCH_HAS_DEBUG_VM_PGTABLE support LoongArch: Add ARCH_HAS_PTE_DEVMAP support LoongArch: Add RANDOMIZE_KSTACK_OFFSET support LoongArch: Add irq_work support via self IPIs LoongArch: Always enumerate MADT and setup logical-physical CPU mapping LoongArch: Define __ARCH_WANT_NEW_STAT in unistd.h |
||
|
Palmer Dabbelt
|
6a4aa4c94b
|
Merge patch series "Add ACPI NUMA support for RISC-V"
Haibo Xu <haibo1.xu@intel.com> says:
This patch series enable RISC-V ACPI NUMA support which was based on
the recently approved ACPI ECR[1].
Patch 1/4 add RISC-V specific acpi_numa.c file to parse NUMA information
from SRAT and SLIT ACPI tables.
Patch 2/4 add the common SRAT RINTC affinity structure handler.
Patch 3/4 change the ACPI_NUMA to a hidden option since it would be selected
by default on all supported platform.
Patch 4/4 replace pr_info with pr_debug in arch_acpi_numa_init() to avoid
potential boot noise on ACPI platforms that are not NUMA.
Based-on: https://github.com/linux-riscv/linux-riscv/tree/for-next
[1] https://drive.google.com/file/d/1YTdDx2IPm5IeZjAW932EYU-tUtgS08tX/view?usp=sharing
Testing:
Since the ACPI AIA/PLIC support patch set is still under upstream review,
hence it is tested using the poll based HVC SBI console and RAM disk.
1) Build latest Qemu with the following patch backported
|
||
|
Haibo Xu
|
adc3e82d25
|
ACPI: NUMA: change the ACPI_NUMA to a hidden option
x86/arm64/loongarch would select ACPI_NUMA by default and riscv would do the same thing, so change it to a hidden option and the select statements except for the X86_64_ACPI_NUMA can also go away. Suggested-by: Arnd Bergmann <arnd@arndb.de> Suggested-by: Sunil V L <sunilvl@ventanamicro.com> Signed-off-by: Haibo Xu <haibo1.xu@intel.com> Reviewed-by: Sunil V L <sunilvl@ventanamicro.com> Acked-by: Huacai Chen <chenhuacai@loongson.cn> Acked-by: Will Deacon <will@kernel.org> Reviewed-by: Hanjun Guo <guohanjun@huawei.com> Link: https://lore.kernel.org/r/f1f96377b8ecd6e3183f28abf5c9ac21cb9855ea.1718268003.git.haibo1.xu@intel.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
|
Xi Ruoyao
|
e05d4cd9b8 |
LoongArch: Add support for relocating the kernel with RELR relocation
RELR as a relocation packing format for relative relocations for reducing the size of relative relocation records. In a position independent executable there are often many relative relocation records, and our vmlinux is a PIE. The LLD linker (since 17.0.0) and the BFD linker (since 2.43) supports packing the relocations in the RELR format for LoongArch, with the flag -z pack-relative-relocs. Commits |
||
|
Huacai Chen
|
f60d251b27 |
LoongArch: Add architectural preparation for CPUFreq
Add architectural preparation for CPUFreq driver, including: Kconfig, register definition and platform device registration. Some of LoongArch processors support DVFS, their IOCSR.FEATURES has IOCSRF_FREQSCALE set. And they has a micro-core in the package called SMC (System Management Controller) to scale frequency, voltage, etc. Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Huacai Chen
|
614d7e9975 |
LoongArch: Add ARCH_HAS_DEBUG_VM_PGTABLE support
Add ARCH_HAS_DEBUG_VM_PGTABLE selection in Kconfig, in order to make corresponding vm debug features usable on LoongArch. Also update the corresponding arch-support.txt document. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |