The nVHE hypervisor needs to have access to its own view of the FGT
masks, which unfortunately results in a bit of data duplication.
Signed-off-by: Marc Zyngier <maz@kernel.org>
... otherwise we can inherit the host configuration if this differs from
the KVM configuration.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
[maz: simplified a couple of things]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Treating HCRX_EL2 as yet another FGT register seems excessive, and
gets in a way of further improvements. It is actually simpler to
just be explicit about the masking, so just to that.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Treating HFGRTR_EL2 and HFGWTR_EL2 identically was a mistake.
It makes things hard to reason about, has the potential to
introduce bugs by giving a meaning to bits that are really reserved,
and is in general a bad description of the architecture.
Given that #defines are cheap, let's describe both registers as
intended by the architecture, and repaint all the existing uses.
Yes, this is painful.
The registers themselves are generated from the JSON file in
an automated way.
Signed-off-by: Marc Zyngier <maz@kernel.org>
The pKVM selftest intends to test as many memory 'transitions' as
possible, so extend it to cover sharing pages with non-protected guests,
including in the case of multi-sharing.
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20250416160900.3078417-5-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
We have recently found a bug [1] in the pKVM memory ownership
transitions by code inspection, but it could have been caught with a
test.
Introduce a boot-time selftest exercising all the known pKVM memory
transitions and importantly checks the rejection of illegal transitions.
The new test is hidden behind a new Kconfig option separate from
CONFIG_EL2_NVHE_DEBUG on purpose as that has side effects on the
transition checks ([1] doesn't reproduce with EL2 debug enabled).
[1] https://lore.kernel.org/kvmarm/20241128154406.602875-1-qperret@google.com/
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20250416160900.3078417-4-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
We currently WARN() if the host attempts to share a page that is not in
an acceptable state with a guest. This isn't strictly necessary and
makes testing much harder, so drop the WARN and make sure to propage the
error code instead.
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20250416160900.3078417-3-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
The hypervisor has not needed its own .data section because all globals
were either .rodata or .bss. To avoid having to initialize future
data-structures at run-time, let's introduce add a .data section to the
hypervisor.
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20250416160900.3078417-2-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
We keep setting and clearing these bits depending on the role of
the host kernel, mimicking what we do for nVHE. But that's actually
pretty pointless, as we always want physical interrupts to make it
to the host, at EL2.
This has also two problems:
- it prevents IRQs from being taken when these bits are cleared
if the implementation has chosen to implement these bits as
masks when HCR_EL2.{TGE,xMO}=={0,0}
- it triggers a bad erratum on the AmpereOne HW, which catches
fire on clearing these bits while an interrupt is being taken
(AC03_CPU_36).
Let's kill these two birds with a single stone, and permanently
set the xMO bits when running VHE. This involves a bit of surgery
on code paths that rely on flipping these bits on and off for
other purposes.
Note that the earliest setting of hcr_el2 (in the init_hcr_el2
macro) is left untouched as is runs extremely early, with interrupts
disabled, and soon enough overwritten with the final value containing
the xMO bits.
Reported-by: D Scott Phillips <scott@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20250429114326.3618875-1-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
We keep setting and clearing these bits depending on the role of
the host kernel, mimicking what we do for nVHE. But that's actually
pretty pointless, as we always want physical interrupts to make it
to the host, at EL2.
This has also two problems:
- it prevents IRQs from being taken when these bits are cleared
if the implementation has chosen to implement these bits as
masks when HCR_EL2.{TGE,xMO}=={0,0}
- it triggers a bad erratum on the AmpereOne HW, which catches
fire on clearing these bits while an interrupt is being taken
(AC03_CPU_36).
Let's kill these two birds with a single stone, and permanently
set the xMO bits when running VHE. This involves a bit of surgery
on code paths that rely on flipping these bits on and off for
other purposes.
Note that the earliest setting of hcr_el2 (in the init_hcr_el2
macro) is left untouched as is runs extremely early, with interrupts
disabled, and soon enough overwritten with the final value containing
the xMO bits.
Reported-by: D Scott Phillips <scott@os.amperecomputing.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250429114326.3618875-1-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Now that the hypervisor's state is stored in the hyp_vmemmap, we no
longer need an expensive page-table walk to read it. This means we can
now afford to cross check the hyp-state during all memory ownership
transitions where the hyp is involved unconditionally, hence avoiding
problems such as [1].
[1] https://lore.kernel.org/kvmarm/20241128154406.602875-1-qperret@google.com/
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20250416152648.2982950-8-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
We currently blindly map into EL2 stage-1 *any* page passed to the
__pkvm_host_share_hyp() HVC. This is less than ideal from a security
perspective as it makes exploitation of potential hypervisor gadgets
easier than it should be. But interestingly, pKVM should never need to
access SHARED_BORROWED pages that it hasn't previously pinned, so there
is no need to map the page before that.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20250416152648.2982950-7-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tracking the hypervisor's ownership state into struct hyp_page has
several benefits, including allowing far more efficient lookups (no
page-table walk needed) and de-corelating the state from the presence
of a mapping. This will later allow to map pages into EL2 stage-1 less
proactively which is generally a good thing for security. And in the
future this will help with tracking the state of pages mapped into the
hypervisor's private range without requiring an alias into the 'linear
map' range.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20250416152648.2982950-6-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Instead of directly accessing the host_state member in struct hyp_page,
introduce static inline accessors to do it. The future hyp_state member
will follow the same pattern as it will need some logic in the accessors.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20250416152648.2982950-5-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
The page ownership state encoded as 0b11 is currently considered
reserved for future use, and PKVM_NOPAGE uses bit 2. In order to
simplify the relocation of the hyp ownership state into the
vmemmap in later patches, let's use the 'reserved' encoding for
the PKVM_NOPAGE state. The struct hyp_page layout isn't guaranteed
stable at all, so there is no real reason to have 'reserved' encodings.
No functional changes intended.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20250416152648.2982950-4-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Most of the comments relating to pKVM page-tracking in nvhe/memory.h are
now either slightly outdated or outright wrong. Fix the comments.
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20250416152648.2982950-3-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
When dealing with a guest with SVE enabled, make sure the host SVE
state is pinned at EL2 S1, and that the hypervisor vCPU state is
correctly initialised (and then unpinned on teardown).
Co-authored-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20250416152648.2982950-2-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
The pKVM FF-A proxy rejects FF-A requests other than FFA_VERSION until
version negotiation is complete, which is signalled by setting the
global 'has_version_negotiated' variable.
To avoid excessive locking, this variable is checked directly from
kvm_host_ffa_handler() in response to an FF-A call, but this can race
against another CPU performing the negotiation and potentially lead to
reading a torn value (incredibly unlikely for a 'bool') or problematic
re-ordering of the accesses to 'has_version_negotiated' and
'hyp_ffa_version' whereby a stale version number could be read by
__do_ffa_mem_xfer().
Use acquire/release primitives when writing 'has_version_negotiated'
with the version lock held and when reading without the lock held.
Cc: Sebastian Ene <sebastianene@google.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Quentin Perret <qperret@google.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Marc Zyngier <maz@kernel.org>
Fixes: c9c012625e ("KVM: arm64: Trap FFA_VERSION host call in pKVM")
Signed-off-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250407152755.1041-1-will@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Don't re-walk the page tables if an SEA occurred during the faulting
page table walk to avoid taking a fatal exception in the hyp.
Additionally, check that FAR_EL2 is valid for SEAs not taken on PTW
as the architecture doesn't guarantee it contains the fault VA.
Finally, fix up the rest of the abort path by checking for SEAs early
and bugging the VM if we get further along with an UNKNOWN fault IPA.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250402201725.2963645-4-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
KVM's logic for deciding when HPFAR_EL2 is UNKNOWN doesn't align with
the architecture. Most notably, KVM assumes HPFAR_EL2 contains the
faulting IPA even in the case of an SEA.
Align the logic with the architecture rather than attempting to
paraphrase it. Additionally, take the opportunity to improve the
language around ARM erratum #834220 such that it actually describes the
bug.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250402201725.2963645-2-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
* kvm-arm64/pkvm-6.15:
: pKVM updates for 6.15
:
: - SecPageTable stats for stage-2 table pages allocated by the protected
: hypervisor (Vincent Donnefort)
:
: - HCRX_EL2 trap + vCPU initialization fixes for pKVM (Fuad Tabba)
KVM: arm64: Create each pKVM hyp vcpu after its corresponding host vcpu
KVM: arm64: Factor out pKVM hyp vcpu creation to separate function
KVM: arm64: Initialize HCRX_EL2 traps in pKVM
KVM: arm64: Factor out setting HCRX_EL2 traps into separate function
KVM: arm64: Count pKVM stage-2 usage in secondary pagetable stats
KVM: arm64: Distinct pKVM teardown memcache for stage-2
KVM: arm64: Add flags to kvm_hyp_memcache
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
* kvm-arm64/writable-midr:
: Writable implementation ID registers, courtesy of Sebastian Ott
:
: Introduce a new capability that allows userspace to set the
: ID registers that identify a CPU implementation: MIDR_EL1, REVIDR_EL1,
: and AIDR_EL1. Also plug a hole in KVM's trap configuration where
: SMIDR_EL1 was readable at EL1, despite the fact that KVM does not
: support SME.
KVM: arm64: Fix documentation for KVM_CAP_ARM_WRITABLE_IMP_ID_REGS
KVM: arm64: Copy MIDR_EL1 into hyp VM when it is writable
KVM: arm64: Copy guest CTR_EL0 into hyp VM
KVM: selftests: arm64: Test writes to MIDR,REVIDR,AIDR
KVM: arm64: Allow userspace to change the implementation ID registers
KVM: arm64: Load VPIDR_EL2 with the VM's MIDR_EL1 value
KVM: arm64: Maintain per-VM copy of implementation ID regs
KVM: arm64: Set HCR_EL2.TID1 unconditionally
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
* kvm-arm64/pmuv3-asahi:
: Support PMUv3 for KVM guests on Apple silicon
:
: Take advantage of some IMPLEMENTATION DEFINED traps available on Apple
: parts to trap-and-emulate the PMUv3 registers on behalf of a KVM guest.
: Constrain the vPMU to a cycle counter and single event counter, as the
: Apple PMU has events that cannot be counted on every counter.
:
: There is a small new interface between the ARM PMU driver and KVM, where
: the PMU driver owns the PMUv3 -> hardware event mappings.
arm64: Enable IMP DEF PMUv3 traps on Apple M*
KVM: arm64: Provide 1 event counter on IMPDEF hardware
drivers/perf: apple_m1: Provide helper for mapping PMUv3 events
KVM: arm64: Remap PMUv3 events onto hardware
KVM: arm64: Advertise PMUv3 if IMPDEF traps are present
KVM: arm64: Compute synthetic sysreg ESR for Apple PMUv3 traps
KVM: arm64: Move PMUVer filtering into KVM code
KVM: arm64: Use guard() to cleanup usage of arm_pmus_lock
KVM: arm64: Drop kvm_arm_pmu_available static key
KVM: arm64: Use a cpucap to determine if system supports FEAT_PMUv3
KVM: arm64: Always support SW_INCR PMU event
KVM: arm64: Compute PMCEID from arm_pmu's event bitmaps
drivers/perf: apple_m1: Support host/guest event filtering
drivers/perf: apple_m1: Refactor event select/filter configuration
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
* kvm-arm64/nv-vgic:
: NV VGICv3 support, courtesy of Marc Zyngier
:
: Support for emulating the GIC hypervisor controls and managing shadow
: VGICv3 state for the L1 hypervisor. As part of it, bring in support for
: taking IRQs to the L1 and UAPI to manage the VGIC maintenance interrupt.
KVM: arm64: nv: Fail KVM init if asking for NV without GICv3
KVM: arm64: nv: Allow userland to set VGIC maintenance IRQ
KVM: arm64: nv: Fold GICv3 host trapping requirements into guest setup
KVM: arm64: nv: Propagate used_lrs between L1 and L0 contexts
KVM: arm64: nv: Request vPE doorbell upon nested ERET to L2
KVM: arm64: nv: Respect virtual HCR_EL2.TWx setting
KVM: arm64: nv: Add Maintenance Interrupt emulation
KVM: arm64: nv: Handle L2->L1 transition on interrupt injection
KVM: arm64: nv: Nested GICv3 emulation
KVM: arm64: nv: Sanitise ICH_HCR_EL2 accesses
KVM: arm64: nv: Plumb handling of GICv3 EL2 accesses
KVM: arm64: nv: Add ICH_*_EL2 registers to vpcu_sysreg
KVM: arm64: nv: Load timer before the GIC
arm64: sysreg: Add layout for ICH_MISR_EL2
arm64: sysreg: Add layout for ICH_VTR_EL2
arm64: sysreg: Add layout for ICH_HCR_EL2
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Instead of creating and initializing _all_ hyp vcpus in pKVM when
the first host vcpu runs for the first time, initialize _each_
hyp vcpu in conjunction with its corresponding host vcpu.
Some of the host vcpu state (e.g., system registers and traps
values) is not initialized until the first time the host vcpu is
run. Therefore, initializing a hyp vcpu before its corresponding
host vcpu has run for the first time might not view the complete
host state of these vcpus.
Additionally, this behavior is inline with non-protected modes.
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20250314111832.4137161-5-tabba@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Initialize and set the traps controlled by the HCRX_EL2 in pKVM.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20250314111832.4137161-3-tabba@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
In order to account for memory dedicated to the stage-2 page-tables, use
a separated memcache when tearing down the VM. Meanwhile rename
reclaim_guest_pages to reflect the fact it only reclaim page-table
pages.
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250313114038.1502357-3-vdonnefort@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Apple M* CPUs provide an IMPDEF trap for PMUv3 sysregs, where ESR_EL2.EC
is a reserved value (0x3F) and a sysreg-like ISS is reported in
AFSR1_EL2.
Compute a synthetic ESR for these PMUv3 traps, giving the illusion of
something architectural to the rest of KVM.
Tested-by: Janne Grunau <j@jannau.net>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250305202641.428114-10-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
KVM is about to learn some new tricks to virtualize PMUv3 on IMPDEF
hardware. As part of that, we now need to differentiate host support
from guest support for PMUv3.
Add a cpucap to determine if an architectural PMUv3 is present to guard
host usage of PMUv3 controls.
Tested-by: Janne Grunau <j@jannau.net>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250305202641.428114-6-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
KVM recently added a capability that allows userspace to override the
'implementation ID' registers presented to the VM. MIDR_EL1 is a special
example, where the hypervisor can directly set the value when read from
EL1 using VPIDR_EL2.
Copy the VM-wide value for MIDR_EL1 into the hyp VM for non-protected
guests when the capability is enabled so VPIDR_EL2 gets set up
correctly.
Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/kvmarm/ac594b9c-4bbb-46c8-9391-e7a68ce4de5b@sirena.org.uk/
Fixes: 3adaee7830 ("KVM: arm64: Allow userspace to change the implementation ID registers")
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250305230825.484091-3-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Since commit 2843cae266 ("KVM: arm64: Treat CTR_EL0 as a VM feature
ID register") KVM has allowed userspace to configure the VM-wide view of
CTR_EL0, falling back to trap-n-emulate if the value doesn't match
hardware. It appears that this has worked by chance in protected-mode
for some time, and on systems with FEAT_EVT protected-mode
unconditionally sets TID4 (i.e. TID2 traps sans CTR_EL0).
Forward the guest CTR_EL0 value through to the hyp VM and align the
TID2/TID4 configuration with the non-protected setup.
Fixes: 2843cae266 ("KVM: arm64: Treat CTR_EL0 as a VM feature ID register")
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250305230825.484091-2-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
When entering a nested VM, we set up the hypervisor control interface
based on what the guest hypervisor has set. Especially, we investigate
each list register written by the guest hypervisor whether HW bit is
set. If so, we translate hw irq number from the guest's point of view
to the real hardware irq number if there is a mapping.
Co-developed-by: Jintack Lim <jintack@cs.columbia.edu>
Signed-off-by: Jintack Lim <jintack@cs.columbia.edu>
[Christoffer: Redesigned execution flow around vcpu load/put]
Co-developed-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
[maz: Rewritten to support GICv3 instead of GICv2, NV2 support]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250225172930.1850838-9-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
The ICH_HCR_EL2-related macros are missing a number of control
bits that we are about to handle. Take this opportunity to fully
describe the layout of that register as part of the automatic
generation infrastructure.
This results in a bit of churn, unfortunately.
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250225172930.1850838-2-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
When KVM is in protected mode, host calls to PSCI are proxied via EL2,
and cold entries from CPU_ON, CPU_SUSPEND, and SYSTEM_SUSPEND bounce
through __kvm_hyp_init_cpu() at EL2 before entering the host kernel's
entry point at EL1. While __kvm_hyp_init_cpu() initializes SPSR_EL2 for
the exception return to EL1, it does not initialize SCTLR_EL1.
Due to this, it's possible to enter EL1 with SCTLR_EL1 in an UNKNOWN
state. In practice this has been seen to result in kernel crashes after
CPU_ON as a result of SCTLR_EL1.M being 1 in violation of the initial
core configuration specified by PSCI.
Fix this by initializing SCTLR_EL1 for cold entry to the host kernel.
As it's necessary to write to SCTLR_EL12 in VHE mode, this
initialization is moved into __kvm_host_psci_cpu_entry() where we can
use write_sysreg_el1().
The remnants of the '__init_el2_nvhe_prepare_eret' macro are folded into
its only caller, as this is clearer than having the macro.
Fixes: cdf3671927 ("KVM: arm64: Intercept host's CPU_ON SMCs")
Reported-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Ahmed Genidi <ahmed.genidi@arm.com>
[ Mark: clarify commit message, handle E2H, move to C, remove macro ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Ahmed Genidi <ahmed.genidi@arm.com>
Cc: Ben Horgan <ben.horgan@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Link: https://lore.kernel.org/r/20250227180526.1204723-3-mark.rutland@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
On CPUs without FEAT_E2H0, HCR_EL2.E2H is RES1, but may reset to an
UNKNOWN value out of reset and consequently may not read as 1 unless it
has been explicitly initialized.
We handled this for the head.S boot code in commits:
3944382fa6 ("arm64: Treat HCR_EL2.E2H as RES1 when ID_AA64MMFR4_EL1.E2H0 is negative")
b3320142f3 ("arm64: Fix early handling of FEAT_E2H0 not being implemented")
Unfortunately, we forgot to apply a similar fix to the KVM PSCI entry
points used when relaying CPU_ON, CPU_SUSPEND, and SYSTEM SUSPEND. When
KVM is entered via these entry points, the value of HCR_EL2.E2H may be
consumed before it has been initialized (e.g. by the 'init_el2_state'
macro).
Initialize HCR_EL2.E2H early in these paths such that it can be consumed
reliably. The existing code in head.S is factored out into a new
'init_el2_hcr' macro, and this is used in the __kvm_hyp_init_cpu()
function common to all the relevant PSCI entry points.
For clarity, I've tweaked the assembly used to check whether
ID_AA64MMFR4_EL1.E2H0 is negative. The bitfield is extracted as a signed
value, and this is checked with a signed-greater-or-equal (GE) comparison.
As the hyp code will reconfigure HCR_EL2 later in ___kvm_hyp_init(), all
bits other than E2H are initialized to zero in __kvm_hyp_init_cpu().
Fixes: 3944382fa6 ("arm64: Treat HCR_EL2.E2H as RES1 when ID_AA64MMFR4_EL1.E2H0 is negative")
Fixes: b3320142f3 ("arm64: Fix early handling of FEAT_E2H0 not being implemented")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Ahmed Genidi <ahmed.genidi@arm.com>
Cc: Ben Horgan <ben.horgan@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250227180526.1204723-2-mark.rutland@arm.com
[maz: fixed LT->GE thinko]
Signed-off-by: Marc Zyngier <maz@kernel.org>
KVM's treatment of the ID registers that describe the implementation
(MIDR, REVIDR, and AIDR) is interesting, to say the least. On the
userspace-facing end of it, KVM presents the values of the boot CPU on
all vCPUs and treats them as invariant. On the guest side of things KVM
presents the hardware values of the local CPU, which can change during
CPU migration in a big-little system.
While one may call this fragile, there is at least some degree of
predictability around it. For example, if a VMM wanted to present
big-little to a guest, it could affine vCPUs accordingly to the correct
clusters.
All of this makes a giant mess out of adding support for making these
implementation ID registers writable. Avoid breaking the rather subtle
ABI around the old way of doing things by requiring opt-in from
userspace to make the registers writable.
When the cap is enabled, allow userspace to set MIDR, REVIDR, and AIDR
to any non-reserved value and present those values consistently across
all vCPUs.
Signed-off-by: Sebastian Ott <sebott@redhat.com>
[oliver: changelog, capability]
Link: https://lore.kernel.org/r/20250225005401.679536-5-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Userspace will soon be able to change the value of MIDR_EL1. Prepare by
loading VPIDR_EL2 with the guest value for non-nested VMs.
Since VPIDR_EL2 is set for any VM, get rid of the NV-specific cleanup of
reloading the hardware value on vcpu_put(). And for nVHE, load the
hardware value before switching to the host.
Link: https://lore.kernel.org/r/20250225005401.679536-4-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
- Large set of fixes for vector handling, specially in the interactions
between host and guest state. This fixes a number of bugs affecting
actual deployments, and greatly simplifies the FP/SIMD/SVE handling.
Thanks to Mark Rutland for dealing with this thankless task.
- Fix an ugly race between vcpu and vgic creation/init, resulting in
unexpected behaviours.
- Fix use of kernel VAs at EL2 when emulating timers with nVHE.
- Small set of pKVM improvements and cleanups.
-----BEGIN PGP SIGNATURE-----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=L5HS
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.14, take #2
- Large set of fixes for vector handling, specially in the interactions
between host and guest state. This fixes a number of bugs affecting
actual deployments, and greatly simplifies the FP/SIMD/SVE handling.
Thanks to Mark Rutland for dealing with this thankless task.
- Fix an ugly race between vcpu and vgic creation/init, resulting in
unexpected behaviours.
- Fix use of kernel VAs at EL2 when emulating timers with nVHE.
- Small set of pKVM improvements and cleanups.
Now that EL2 has gained some early timer emulation, it accesses
the offsets pointed to by the timer structure, both of which
live in the KVM structure.
Of course, these are *kernel* pointers, so the dereferencing
of these pointers in non-kernel code must be itself be offset.
Given switch.h its own version of timer_get_offset() and use that
instead.
Fixes: b86fc215dc ("KVM: arm64: Handle counter access early in non-HYP context")
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Link: https://lore.kernel.org/r/20250212173454.2864462-1-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
In non-protected KVM modes, while the guest FPSIMD/SVE/SME state is live on the
CPU, the host's active SVE VL may differ from the guest's maximum SVE VL:
* For VHE hosts, when a VM uses NV, ZCR_EL2 contains a value constrained
by the guest hypervisor, which may be less than or equal to that
guest's maximum VL.
Note: in this case the value of ZCR_EL1 is immaterial due to E2H.
* For nVHE/hVHE hosts, ZCR_EL1 contains a value written by the guest,
which may be less than or greater than the guest's maximum VL.
Note: in this case hyp code traps host SVE usage and lazily restores
ZCR_EL2 to the host's maximum VL, which may be greater than the
guest's maximum VL.
This can be the case between exiting a guest and kvm_arch_vcpu_put_fp().
If a softirq is taken during this period and the softirq handler tries
to use kernel-mode NEON, then the kernel will fail to save the guest's
FPSIMD/SVE state, and will pend a SIGKILL for the current thread.
This happens because kvm_arch_vcpu_ctxsync_fp() binds the guest's live
FPSIMD/SVE state with the guest's maximum SVE VL, and
fpsimd_save_user_state() verifies that the live SVE VL is as expected
before attempting to save the register state:
| if (WARN_ON(sve_get_vl() != vl)) {
| force_signal_inject(SIGKILL, SI_KERNEL, 0, 0);
| return;
| }
Fix this and make this a bit easier to reason about by always eagerly
switching ZCR_EL{1,2} at hyp during guest<->host transitions. With this
happening, there's no need to trap host SVE usage, and the nVHE/nVHE
__deactivate_cptr_traps() logic can be simplified to enable host access
to all present FPSIMD/SVE/SME features.
In protected nVHE/hVHE modes, the host's state is always saved/restored
by hyp, and the guest's state is saved prior to exit to the host, so
from the host's PoV the guest never has live FPSIMD/SVE/SME state, and
the host's ZCR_EL1 is never clobbered by hyp.
Fixes: 8c8010d69c ("KVM: arm64: Save/restore SVE state for nVHE")
Fixes: 2e3cf82063 ("KVM: arm64: nv: Ensure correct VL is loaded before saving SVE state")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250210195226.1215254-9-mark.rutland@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
The shared hyp switch header has a number of static functions which
might not be used by all files that include the header, and when unused
they will provoke compiler warnings, e.g.
| In file included from arch/arm64/kvm/hyp/nvhe/hyp-main.c:8:
| ./arch/arm64/kvm/hyp/include/hyp/switch.h:703:13: warning: 'kvm_hyp_handle_dabt_low' defined but not used [-Wunused-function]
| 703 | static bool kvm_hyp_handle_dabt_low(struct kvm_vcpu *vcpu, u64 *exit_code)
| | ^~~~~~~~~~~~~~~~~~~~~~~
| ./arch/arm64/kvm/hyp/include/hyp/switch.h:682:13: warning: 'kvm_hyp_handle_cp15_32' defined but not used [-Wunused-function]
| 682 | static bool kvm_hyp_handle_cp15_32(struct kvm_vcpu *vcpu, u64 *exit_code)
| | ^~~~~~~~~~~~~~~~~~~~~~
| ./arch/arm64/kvm/hyp/include/hyp/switch.h:662:13: warning: 'kvm_hyp_handle_sysreg' defined but not used [-Wunused-function]
| 662 | static bool kvm_hyp_handle_sysreg(struct kvm_vcpu *vcpu, u64 *exit_code)
| | ^~~~~~~~~~~~~~~~~~~~~
| ./arch/arm64/kvm/hyp/include/hyp/switch.h:458:13: warning: 'kvm_hyp_handle_fpsimd' defined but not used [-Wunused-function]
| 458 | static bool kvm_hyp_handle_fpsimd(struct kvm_vcpu *vcpu, u64 *exit_code)
| | ^~~~~~~~~~~~~~~~~~~~~
| ./arch/arm64/kvm/hyp/include/hyp/switch.h:329:13: warning: 'kvm_hyp_handle_mops' defined but not used [-Wunused-function]
| 329 | static bool kvm_hyp_handle_mops(struct kvm_vcpu *vcpu, u64 *exit_code)
| | ^~~~~~~~~~~~~~~~~~~
Mark these functions as 'inline' to suppress this warning. This
shouldn't result in any functional change.
At the same time, avoid the use of __alias() in the header and alias
kvm_hyp_handle_iabt_low() and kvm_hyp_handle_watchpt_low() to
kvm_hyp_handle_memory_fault() using CPP, matching the style in the rest
of the kernel. For consistency, kvm_hyp_handle_memory_fault() is also
marked as 'inline'.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250210195226.1215254-8-mark.rutland@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
The hyp exit handling logic is largely shared between VHE and nVHE/hVHE,
with common logic in arch/arm64/kvm/hyp/include/hyp/switch.h. The code
in the header depends on function definitions provided by
arch/arm64/kvm/hyp/vhe/switch.c and arch/arm64/kvm/hyp/nvhe/switch.c
when they include the header.
This is an unusual header dependency, and prevents the use of
arch/arm64/kvm/hyp/include/hyp/switch.h in other files as this would
result in compiler warnings regarding missing definitions, e.g.
| In file included from arch/arm64/kvm/hyp/nvhe/hyp-main.c:8:
| ./arch/arm64/kvm/hyp/include/hyp/switch.h:733:31: warning: 'kvm_get_exit_handler_array' used but never defined
| 733 | static const exit_handler_fn *kvm_get_exit_handler_array(struct kvm_vcpu *vcpu);
| | ^~~~~~~~~~~~~~~~~~~~~~~~~~
| ./arch/arm64/kvm/hyp/include/hyp/switch.h:735:13: warning: 'early_exit_filter' used but never defined
| 735 | static void early_exit_filter(struct kvm_vcpu *vcpu, u64 *exit_code);
| | ^~~~~~~~~~~~~~~~~
Refactor the logic such that the header doesn't depend on anything from
the C files. There should be no functional change as a result of this
patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250210195226.1215254-7-mark.rutland@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
For historical reasons, the VHE and nVHE/hVHE implementations of
__activate_cptr_traps() pair with a common implementation of
__kvm_reset_cptr_el2(), which ideally would be named
__deactivate_cptr_traps().
Rename __kvm_reset_cptr_el2() to __deactivate_cptr_traps(), and split it
into separate VHE and nVHE/hVHE variants so that each can be paired with
its corresponding implementation of __activate_cptr_traps().
At the same time, fold kvm_write_cptr_el2() into its callers. This
makes it clear in-context whether a write is made to the CPACR_EL1
encoding or the CPTR_EL2 encoding, and removes the possibility of
confusion as to whether kvm_write_cptr_el2() reformats the sysreg fields
as cpacr_clear_set() does.
In the nVHE/hVHE implementation of __activate_cptr_traps(), placing the
sysreg writes within the if-else blocks requires that the call to
__activate_traps_fpsimd32() is moved earlier, but as this was always
called before writing to CPTR_EL2/CPACR_EL1, this should not result in a
functional change.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250210195226.1215254-6-mark.rutland@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Now that the host eagerly saves its own FPSIMD/SVE/SME state,
non-protected KVM never needs to save the host FPSIMD/SVE/SME state,
and the code to do this is never used. Protected KVM still needs to
save/restore the host FPSIMD/SVE state to avoid leaking guest state to
the host (and to avoid revealing to the host whether the guest used
FPSIMD/SVE/SME), and that code needs to be retained.
Remove the unused code and data structures.
To avoid the need for a stub copy of kvm_hyp_save_fpsimd_host() in the
VHE hyp code, the nVHE/hVHE version is moved into the shared switch
header, where it is only invoked when KVM is in protected mode.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250210195226.1215254-3-mark.rutland@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Don't use an uninitialised stack variable, and just return 0
on the non-error path.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202502100911.8c9DbtKD-lkp@intel.com/
Reviewed-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
When the handling of a guest stage-2 permission fault races with an MMU
notifier, the faulting page might be gone from the guest's stage-2 by
the point we attempt to call (p)kvm_pgtable_stage2_relax_perms(). In the
normal KVM case, this leads to returning -EAGAIN which user_mem_abort()
handles correctly by simply re-entering the guest. However, the pKVM
hypercall implementation has additional logic to check the page state
using __check_host_shared_guest() which gets confused with absence of a
page mapped at the requested IPA and returns -ENOENT, hence breaking
user_mem_abort() and hilarity ensues.
Luckily, several of the hypercalls for managing the stage-2 page-table
of NP guests have no effect on the pKVM ownership tracking (wrprotect,
test_clear_young, mkyoung, and crucially relax_perms), so the extra
state checking logic is in fact not strictly necessary. So, to fix the
discrepancy between standard KVM and pKVM, let's just drop the
superfluous __check_host_shared_guest() logic from those hypercalls and
make the extra state checking a debug assertion dependent on
CONFIG_NVHE_EL2_DEBUG as we already do for other transitions.
Signed-off-by: Quentin Perret <qperret@google.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250207145438.1333475-3-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
The check_host_shared_guest() path expects to find a last-level valid
PTE in the guest's stage-2 page-table. However, it checks the PTE's
level before its validity, which makes it hard for callers to figure out
what went wrong.
To make error handling simpler, check the PTE's validity first.
Signed-off-by: Quentin Perret <qperret@google.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250207145438.1333475-2-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
- Correctly clean the BSS to the PoC before allowing EL2 to access it
on nVHE/hVHE/protected configurations
- Propagate ownership of debug registers in protected mode after
the rework that landed in 6.14-rc1
- Stop pretending that we can run the protected mode without a GICv3
being present on the host
- Fix a use-after-free situation that can occur if a vcpu fails to
initialise the NV shadow S2 MMU contexts
- Always evaluate the need to arm a background timer for fully emulated
guest timers
- Fix the emulation of EL1 timers in the absence of FEAT_ECV
- Correctly handle the EL2 virtual timer, specially when HCR_EL2.E2H==0
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEn9UcU+C1Yxj9lZw9I9DQutE9ekMFAmeiNZsACgkQI9DQutE9
ekOmiQ//WsCDESxdg+kezCCmx9yHo8CM5tsOqzcDoIz+KV5aiLB6KlegGbciC9MZ
Fgj8lBr+Mu2GGEhYP/H6glqMLB8VPLiGYzwbeBE8ty2IH5Nn6M9hiKFWTZJVpGma
gNDtFVSO39d39gtklQ4Y3SYSlN0dN2wW47pXxlZiY/aD9GRie7z2m1yC3T05xVpR
TT7XAYjucfx0Cj8vK9MaJyyy69TXsqocdAxZI+ZCp+NI1yuBv7sunjDdfPcp9n4G
Lk+Ikn39FC3qlrjZ38eHidMgY6LQvucrwtlvDuPp7yMuNYTXW6UEIU7RUF1AUts4
IsKKvENV0zLsmtoEAgSa4d9Rtid3eomyll6mb3hBF+1GSBf7+v+sgKdpoB7/mOyn
exGEbYCOXghXswhF9up2YC6jI8XtcO/2nTt6PdS2nMK61mvCb31u6xFvU0yTEMQW
dEDVTcIKmvKrAeVzNOBNNjZj0bGNns0P5+oLFbkOzYj8qNueYS0Y9o996kqODET2
d4J8xib6Mh0cr6usgj0Z8Jp+7vl9Li9KR0SSQqiQyOQcu5St0zidJeCf7J46HCR7
5d8sQi6lYZ+G+9rm0X7Rl8+yBaUhrUs9v+jOAip3M+1fIxIWr9DyDUcQQKv+obW0
KqyMWx4Fv+bDqBqTRdd1r6KQEpLL0DbeWinNrdJdVZkmLyI1Y98=
=idVr
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.14, take #1
- Correctly clean the BSS to the PoC before allowing EL2 to access it
on nVHE/hVHE/protected configurations
- Propagate ownership of debug registers in protected mode after
the rework that landed in 6.14-rc1
- Stop pretending that we can run the protected mode without a GICv3
being present on the host
- Fix a use-after-free situation that can occur if a vcpu fails to
initialise the NV shadow S2 MMU contexts
- Always evaluate the need to arm a background timer for fully emulated
guest timers
- Fix the emulation of EL1 timers in the absence of FEAT_ECV
- Correctly handle the EL2 virtual timer, specially when HCR_EL2.E2H==0
The recent changes to debug state management broke self-hosted debug for
guests when running in protected mode, since both the debug owner and
the debug state itself aren't shared with the hyp's view of the vcpu.
Fix it by flushing/syncing the relevant bits with the hyp vcpu.
Fixes: beb470d96c ("KVM: arm64: Use debug_owner to track if debug regs need save/restore")
Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/kvmarm/5f62740f-a065-42d9-9f56-8fb648b9c63f@sirena.org.uk/
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250131222922.1548780-3-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
* New features:
- Support for non-protected guest in protected mode, achieving near
feature parity with the non-protected mode
- Support for the EL2 timers as part of the ongoing NV support
- Allow control of hardware tracing for nVHE/hVHE
* Improvements, fixes and cleanups:
- Massive cleanup of the debug infrastructure, making it a bit less
awkward and definitely easier to maintain. This should pave the
way for further optimisations
- Complete rewrite of pKVM's fixed-feature infrastructure, aligning
it with the rest of KVM and making the code easier to follow
- Large simplification of pKVM's memory protection infrastructure
- Better handling of RES0/RES1 fields for memory-backed system
registers
- Add a workaround for Qualcomm's Snapdragon X CPUs, which suffer
from a pretty nasty timer bug
- Small collection of cleanups and low-impact fixes
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmeYqJcQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNLUhCACxUTMVQXhfW3qbh0UQxPd7XXvjI+Hm7SPS
wDuVTle4jrFVGHxuZqtgWLmx8hD7bqO965qmFgbevKlwsRY33onH2nbH4i4AcwbA
jcdM4yMHZI4+Qmnb4G5ZJ89IwjAhHPZTBOV5KRhyHQ/qtRciHHtOgJde7II9fd68
uIESg4SSSyUzI47YSEHmGVmiBIhdQhq2qust0m6NPFalEGYstPbpluPQ6R1CsDqK
v14TIAW7t0vSPucBeODxhA5gEa2JsvNi+sqA+DF/ELH2ZqpkuR7rofgMGblaXCSD
JXa5xamRB9dI5zi8vatwfOzYlog+/gzmPqMh/9JXpiDGHxJe0vlz
=tQ8F
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull KVM/arm64 updates from Will Deacon:
"New features:
- Support for non-protected guest in protected mode, achieving near
feature parity with the non-protected mode
- Support for the EL2 timers as part of the ongoing NV support
- Allow control of hardware tracing for nVHE/hVHE
Improvements, fixes and cleanups:
- Massive cleanup of the debug infrastructure, making it a bit less
awkward and definitely easier to maintain. This should pave the way
for further optimisations
- Complete rewrite of pKVM's fixed-feature infrastructure, aligning
it with the rest of KVM and making the code easier to follow
- Large simplification of pKVM's memory protection infrastructure
- Better handling of RES0/RES1 fields for memory-backed system
registers
- Add a workaround for Qualcomm's Snapdragon X CPUs, which suffer
from a pretty nasty timer bug
- Small collection of cleanups and low-impact fixes"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (87 commits)
arm64/sysreg: Get rid of TRFCR_ELx SysregFields
KVM: arm64: nv: Fix doc header layout for timers
KVM: arm64: nv: Apply RESx settings to sysreg reset values
KVM: arm64: nv: Always evaluate HCR_EL2 using sanitising accessors
KVM: arm64: Fix selftests after sysreg field name update
coresight: Pass guest TRFCR value to KVM
KVM: arm64: Support trace filtering for guests
KVM: arm64: coresight: Give TRBE enabled state to KVM
coresight: trbe: Remove redundant disable call
arm64/sysreg/tools: Move TRFCR definitions to sysreg
tools: arm64: Update sysreg.h header files
KVM: arm64: Drop pkvm_mem_transition for host/hyp donations
KVM: arm64: Drop pkvm_mem_transition for host/hyp sharing
KVM: arm64: Drop pkvm_mem_transition for FF-A
KVM: arm64: Explicitly handle BRBE traps as UNDEFINED
KVM: arm64: vgic: Use str_enabled_disabled() in vgic_v3_probe()
arm64: kvm: Introduce nvhe stack size constants
KVM: arm64: Fix nVHE stacktrace VA bits mask
KVM: arm64: Fix FEAT_MTE in pKVM
Documentation: Update the behaviour of "kvm-arm.mode"
...
Confidential Computing:
* Register a platform device when running in CCA realm mode to enable
automatic loading of dependent modules.
CPU Features:
* Update a bunch of system register definitions to pick up new field
encodings from the architectural documentation.
* Add hwcaps and selftests for the new (2024) dpISA extensions.
Documentation:
* Update EL3 (firmware) requirements for booting Linux on modern arm64
designs.
* Remove stale information about the kernel virtual memory map.
Miscellaneous:
* Minor cleanups and typo fixes.
Memory management:
* Fix vmemmap_check_pmd() to look at the PMD type bits
* LPA2 (52-bit physical addressing) cleanups and minor fixes.
* Adjust physical address space depending upon whether or not LPA2 is
enabled.
Perf and PMUs:
* Add port filtering support for NVIDIA's NVLINK-C2C Coresight PMU
* Extend AXI filtering support for the DDR PMU on NXP IMX SoCs
* Fix Designware PCIe PMU event numbering.
* Add generic branch events for the Apple M1 CPU PMU.
* Add support for Marvell Odyssey DDR and LLC-TAD PMUs.
* Cleanups to the Hisilicon DDRC and Uncore PMU code.
* Advertise discard mode for the SPE PMU.
* Add the perf users mailing list to our MAINTAINERS entry.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmeKZLcQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNEQzB/0X2U89ZiqxIkTPQvfFrjN/uUGybkq59rEL
DfeoGukTgJIwc3GHWXXtQ//wuuYKdTeCXaIz5NFK3+7/wmKSLvjkexmue8pta6EY
5rx9bAPr/D8lAUvhKIN2l3pF/ygoRwDz+nT2yVQ1xlZxYJWX7ZIsMj7W7ceb5kdx
HRrTSQuhEEPREAWWO4oCMWl5SQZSrIflSE3Be/PsP0OhW6k//ZmWbcJTgUcHbKam
o2WtNjITyGzxMpRCcrGEZKoe9YcwSxiut/PoD7JuoB4C/rbsf1cdJ6uLmtvGJcZj
qsdRHhVfBzP1+ahONrDbiT3C2+s1UZySKdCDIxiYy6lB39wpP0dd
=E7Mf
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"We've got a little less than normal thanks to the holidays in
December, but there's the usual summary below. The highlight is
probably the 52-bit physical addressing (LPA2) clean-up from Ard.
Confidential Computing:
- Register a platform device when running in CCA realm mode to enable
automatic loading of dependent modules
CPU Features:
- Update a bunch of system register definitions to pick up new field
encodings from the architectural documentation
- Add hwcaps and selftests for the new (2024) dpISA extensions
Documentation:
- Update EL3 (firmware) requirements for booting Linux on modern
arm64 designs
- Remove stale information about the kernel virtual memory map
Miscellaneous:
- Minor cleanups and typo fixes
Memory management:
- Fix vmemmap_check_pmd() to look at the PMD type bits
- LPA2 (52-bit physical addressing) cleanups and minor fixes
- Adjust physical address space depending upon whether or not LPA2 is
enabled
Perf and PMUs:
- Add port filtering support for NVIDIA's NVLINK-C2C Coresight PMU
- Extend AXI filtering support for the DDR PMU on NXP IMX SoCs
- Fix Designware PCIe PMU event numbering
- Add generic branch events for the Apple M1 CPU PMU
- Add support for Marvell Odyssey DDR and LLC-TAD PMUs
- Cleanups to the Hisilicon DDRC and Uncore PMU code
- Advertise discard mode for the SPE PMU
- Add the perf users mailing list to our MAINTAINERS entry"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (64 commits)
Documentation: arm64: Remove stale and redundant virtual memory diagrams
perf docs: arm_spe: Document new discard mode
perf: arm_spe: Add format option for discard mode
MAINTAINERS: Add perf list for drivers/perf/
arm64: Remove duplicate included header
drivers/perf: apple_m1: Map generic branch events
arm64: rsi: Add automatic arm-cca-guest module loading
kselftest/arm64: Add 2024 dpISA extensions to hwcap test
KVM: arm64: Allow control of dpISA extensions in ID_AA64ISAR3_EL1
arm64/hwcap: Describe 2024 dpISA extensions to userspace
arm64/sysreg: Update ID_AA64SMFR0_EL1 to DDI0601 2024-12
arm64: Filter out SVE hwcaps when FEAT_SVE isn't implemented
drivers/perf: hisi: Set correct IRQ affinity for PMUs with no association
arm64/sme: Move storage of reg_smidr to __cpuinfo_store_cpu()
arm64: mm: Test for pmd_sect() in vmemmap_check_pmd()
arm64/mm: Replace open encodings with PXD_TABLE_BIT
arm64/mm: Rename pte_mkpresent() as pte_mkvalid()
arm64/sysreg: Update ID_AA64ISAR2_EL1 to DDI0601 2024-09
arm64/sysreg: Update ID_AA64ZFR0_EL1 to DDI0601 2024-09
arm64/sysreg: Update ID_AA64FPFR0_EL1 to DDI0601 2024-09
...
* for-next/mm:
arm64: mm: Test for pmd_sect() in vmemmap_check_pmd()
arm64/mm: Replace open encodings with PXD_TABLE_BIT
arm64/mm: Rename pte_mkpresent() as pte_mkvalid()
arm64: Kconfig: force ARM64_PAN=y when enabling TTBR0 sw PAN
arm64/kvm: Avoid invalid physical addresses to signal owner updates
arm64/kvm: Configure HYP TCR.PS/DS based on host stage1
arm64/mm: Override PARange for !LPA2 and use it consistently
arm64/mm: Reduce PA space to 48 bits when LPA2 is not enabled
* kvm-arm64/misc-6.14:
: .
: Misc KVM/arm64 changes for 6.14
:
: - Don't expose AArch32 EL0 capability when NV is enabled
:
: - Update documentation to reflect the full gamut of kvm-arm.mode
: behaviours
:
: - Use the hypervisor VA bit width when dumping stacktraces
:
: - Decouple the hypervisor stack size from PAGE_SIZE, at least
: on the surface...
:
: - Make use of str_enabled_disabled() when advertising GICv4.1 support
:
: - Explicitly handle BRBE traps as UNDEFINED
: .
KVM: arm64: Explicitly handle BRBE traps as UNDEFINED
KVM: arm64: vgic: Use str_enabled_disabled() in vgic_v3_probe()
arm64: kvm: Introduce nvhe stack size constants
KVM: arm64: Fix nVHE stacktrace VA bits mask
Documentation: Update the behaviour of "kvm-arm.mode"
KVM: arm64: nv: Advertise the lack of AArch32 EL0 support
Signed-off-by: Marc Zyngier <maz@kernel.org>
* kvm-arm64/nv-resx-fixes-6.14:
: .
: Fixes for NV sysreg accessors. From the cover letter:
:
: "Joey recently reported that some rather basic tests were failing on
: NV, and managed to track it down to critical register fields (such as
: HCR_EL2.E2H) not having their expect value.
:
: Further investigation has outlined a couple of critical issues:
:
: - Evaluating HCR_EL2.E2H must always be done with a sanitising
: accessor, no ifs, no buts. Given that KVM assumes a fixed value for
: this bit, we cannot leave it to the guest to mess with.
:
: - Resetting the sysreg file must result in the RESx bits taking
: effect. Otherwise, we may end-up making the wrong decision (see
: above), and we definitely expose invalid values to the guest. Note
: that because we compute the RESx masks very late in the VM setup, we
: need to apply these masks at that particular point as well.
: [...]"
: .
KVM: arm64: nv: Apply RESx settings to sysreg reset values
KVM: arm64: nv: Always evaluate HCR_EL2 using sanitising accessors
Signed-off-by: Marc Zyngier <maz@kernel.org>
# Conflicts:
# arch/arm64/kvm/nested.c
* kvm-arm64/coresight-6.14:
: .
: Trace filtering update from James Clark. From the cover letter:
:
: "The guest filtering rules from the Perf session are now honored for both
: nVHE and VHE modes. This is done by either writing to TRFCR_EL12 at the
: start of the Perf session and doing nothing else further, or caching the
: guest value and writing it at guest switch for nVHE. In pKVM, trace is
: now be disabled for both protected and unprotected guests."
: .
KVM: arm64: Fix selftests after sysreg field name update
coresight: Pass guest TRFCR value to KVM
KVM: arm64: Support trace filtering for guests
KVM: arm64: coresight: Give TRBE enabled state to KVM
coresight: trbe: Remove redundant disable call
arm64/sysreg/tools: Move TRFCR definitions to sysreg
tools: arm64: Update sysreg.h header files
Signed-off-by: Marc Zyngier <maz@kernel.org>
* kvm-arm64/pkvm-memshare-declutter:
: .
: pKVM memory transition simplifications, courtesy of Quentin Perret.
:
: From the cover letter:
: "Since its early days, pKVM has formalized memory 'transitions' (shares
: and donations) using 'struct pkvm_mem_transition' and bunch of helpers
: to manipulate it. The intention was for all transitions to use this
: machinery to ensure we're checking things consistently. However, as
: development progressed, it became clear that the rigidity of this model
: made it really difficult to use in some use-cases which ended-up
: side-stepping it entirely. That is the case for the
: hyp_{un}pin_shared_mem() and host_{un}share_guest() paths upstream which
: use lower level helpers directly, as well as for several other pKVM
: features that should land upstream in the future (ex: when a guest
: relinquishes a page during ballooning, when annotating a page that is
: being DMA'd to, ...). On top of this, the pkvm_mem_transition machinery
: requires a lot of boilerplate which makes the code hard to read, but
: also adds layers of indirection that no compilers seems to see through,
: hence leading to suboptimal generated code.
:
: Given all the above, this series removes the pkvm_mem_transition
: machinery from mem_protect.c, and converts all its users to use
: __*_{check,set}_page_state_range() low-level helpers directly."
: .
KVM: arm64: Drop pkvm_mem_transition for host/hyp donations
KVM: arm64: Drop pkvm_mem_transition for host/hyp sharing
KVM: arm64: Drop pkvm_mem_transition for FF-A
KVM: arm64: Only apply PMCR_EL0.P to the guest range of counters
KVM: arm64: nv: Reload PMU events upon MDCR_EL2.HPME change
KVM: arm64: Use KVM_REQ_RELOAD_PMU to handle PMCR_EL0.E change
KVM: arm64: Add unified helper for reprogramming counters by mask
KVM: arm64: Always check the state from hyp_ack_unshare()
KVM: arm64: Fix set_id_regs selftest for ASIDBITS becoming unwritable
Signed-off-by: Marc Zyngier <maz@kernel.org>
* kvm-arm64/nv-timers:
: .
: Nested Virt support for the EL2 timers. From the initial cover letter:
:
: "Here's another batch of NV-related patches, this time bringing in most
: of the timer support for EL2 as well as nested guests.
:
: The code is pretty convoluted for a bunch of reasons:
:
: - FEAT_NV2 breaks the timer semantics by redirecting HW controls to
: memory, meaning that a guest could setup a timer and never see it
: firing until the next exit
:
: - We go try hard to reflect the timer state in memory, but that's not
: great.
:
: - With FEAT_ECV, we can finally correctly emulate the virtual timer,
: but this emulation is pretty costly
:
: - As a way to make things suck less, we handle timer reads as early as
: possible, and only defer writes to the normal trap handling
:
: - Finally, some implementations are badly broken, and require some
: hand-holding, irrespective of NV support. So we try and reuse the NV
: infrastructure to make them usable. This could be further optimised,
: but I'm running out of patience for this sort of HW.
:
: [...]"
: .
KVM: arm64: nv: Fix doc header layout for timers
KVM: arm64: nv: Document EL2 timer API
KVM: arm64: Work around x1e's CNTVOFF_EL2 bogosity
KVM: arm64: nv: Sanitise CNTHCTL_EL2
KVM: arm64: nv: Propagate CNTHCTL_EL2.EL1NV{P,V}CT bits
KVM: arm64: nv: Add trap routing for CNTHCTL_EL2.EL1{NVPCT,NVVCT,TVT,TVCT}
KVM: arm64: Handle counter access early in non-HYP context
KVM: arm64: nv: Accelerate EL0 counter accesses from hypervisor context
KVM: arm64: nv: Accelerate EL0 timer read accesses when FEAT_ECV in use
KVM: arm64: nv: Use FEAT_ECV to trap access to EL0 timers
KVM: arm64: nv: Publish emulated timer interrupt state in the in-memory state
KVM: arm64: nv: Sync nested timer state with FEAT_NV2
KVM: arm64: nv: Add handling of EL2-specific timer registers
Signed-off-by: Marc Zyngier <maz@kernel.org>
A lot of the NV code depends on HCR_EL2.{E2H,TGE}, and we assume
in places that at least HCR_EL2.E2H is invariant for a given guest.
However, we make a point in *not* using the sanitising accessor
that would enforce this, and are at the mercy of the guest doing
stupid things. Clearly, that's not good.
Rework the HCR_EL2 accessors to use __vcpu_sys_reg() instead,
guaranteeing that the RESx settings get applied, specially
when HCR_EL2.E2H is evaluated. This results in fewer accessors
overall.
Huge thanks to Joey who spent a long time tracking this bug down.
Reported-by: Joey Gouly <Joey.Gouly@arm.com>
Tested-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Link: https://lore.kernel.org/r/20250112165029.1181056-2-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Currently in nVHE, KVM has to check if TRBE is enabled on every guest
switch even if it was never used. Because it's a debug feature and is
more likely to not be used than used, give KVM the TRBE buffer status to
allow a much simpler and faster do-nothing path in the hyp.
Protected mode now disables trace regardless of TRBE (because
trfcr_while_in_guest is always 0), which was not previously done.
However, it continues to flush whenever the buffer is enabled
regardless of the filter status. This avoids the hypothetical case of a
host that had disabled the filter but not flushed which would arise if
only doing the flush when the filter was enabled.
Signed-off-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20250106142446.628923-6-james.clark@linaro.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Simplify the __pkvm_host_donate_hyp() and pkvm_hyp_donate_host() paths
by not using the pkvm_mem_transition machinery. As the last users of
this, also remove all the now unused code.
No functional changes intended.
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20250110121936.1559655-4-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Simplify the __pkvm_host_{un}share_hyp() paths by not using the
pkvm_mem_transition machinery. As there are the last users of the
do_share()/do_unshare(), remove all the now-unused code as well.
No functional changes intended.
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20250110121936.1559655-3-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Simplify the __pkvm_host_{un}share_ffa() paths by using
{check,set}_page_state_range().
No functional changes intended.
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20250110121936.1559655-2-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
* kvm-arm64/pkvm-fixed-features-6.14: (24 commits)
: .
: Complete rework of the pKVM handling of features, catching up
: with the rest of the code deals with it these days.
: Patches courtesy of Fuad Tabba. From the cover letter:
:
: "This patch series uses the vm's feature id registers to track the
: supported features, a framework similar to nested virt to set the
: trap values, and removes the need to store cptr_el2 per vcpu in
: favor of setting its value when traps are activated, as VHE mode
: does."
:
: This branch drags the arm64/for-next/cpufeature branch to solve
: ugly conflicts in -next.
: .
KVM: arm64: Fix FEAT_MTE in pKVM
KVM: arm64: Use kvm_vcpu_has_feature() directly for struct kvm
KVM: arm64: Convert the SVE guest vcpu flag to a vm flag
KVM: arm64: Remove PtrAuth guest vcpu flag
KVM: arm64: Fix the value of the CPTR_EL2 RES1 bitmask for nVHE
KVM: arm64: Refactor kvm_reset_cptr_el2()
KVM: arm64: Calculate cptr_el2 traps on activating traps
KVM: arm64: Remove redundant setting of HCR_EL2 trap bit
KVM: arm64: Remove fixed_config.h header
KVM: arm64: Rework specifying restricted features for protected VMs
KVM: arm64: Set protected VM traps based on its view of feature registers
KVM: arm64: Fix RAS trapping in pKVM for protected VMs
KVM: arm64: Initialize feature id registers for protected VMs
KVM: arm64: Use KVM extension checks for allowed protected VM capabilities
KVM: arm64: Remove KVM_ARM_VCPU_POWER_OFF from protected VMs allowed features in pKVM
KVM: arm64: Move checking protected vcpu features to a separate function
KVM: arm64: Group setting traps for protected VMs by control register
KVM: arm64: Consolidate allowed and restricted VM feature checks
arm64/sysreg: Get rid of CPACR_ELx SysregFields
arm64/sysreg: Convert *_EL12 accessors to Mapping
...
Signed-off-by: Marc Zyngier <maz@kernel.org>
# Conflicts:
# arch/arm64/kvm/fpsimd.c
# arch/arm64/kvm/hyp/nvhe/pkvm.c
* kvm-arm64/pkvm-np-guest:
: .
: pKVM support for non-protected guests using the standard MM
: infrastructure, courtesy of Quentin Perret. From the cover letter:
:
: "This series moves the stage-2 page-table management of non-protected
: guests to EL2 when pKVM is enabled. This is only intended as an
: incremental step towards a 'feature-complete' pKVM, there is however a
: lot more that needs to come on top.
:
: With that series applied, pKVM provides near-parity with standard KVM
: from a functional perspective all while Linux no longer touches the
: stage-2 page-tables itself at EL1. The majority of mm-related KVM
: features work out of the box, including MMU notifiers, dirty logging,
: RO memslots and things of that nature. There are however two gotchas:
:
: - We don't support mapping devices into guests: this requires
: additional hypervisor support for tracking the 'state' of devices,
: which will come in a later series. No device assignment until then.
:
: - Stage-2 mappings are forced to page-granularity even when backed by a
: huge page for the sake of simplicity of this series. I'm only aiming
: at functional parity-ish (from userspace's PoV) for now, support for
: HP can be added on top later as a perf improvement."
: .
KVM: arm64: Plumb the pKVM MMU in KVM
KVM: arm64: Introduce the EL1 pKVM MMU
KVM: arm64: Introduce __pkvm_tlb_flush_vmid()
KVM: arm64: Introduce __pkvm_host_mkyoung_guest()
KVM: arm64: Introduce __pkvm_host_test_clear_young_guest()
KVM: arm64: Introduce __pkvm_host_wrprotect_guest()
KVM: arm64: Introduce __pkvm_host_relax_guest_perms()
KVM: arm64: Introduce __pkvm_host_unshare_guest()
KVM: arm64: Introduce __pkvm_host_share_guest()
KVM: arm64: Introduce __pkvm_vcpu_{load,put}()
KVM: arm64: Add {get,put}_pkvm_hyp_vm() helpers
KVM: arm64: Make kvm_pgtable_stage2_init() a static inline function
KVM: arm64: Pass walk flags to kvm_pgtable_stage2_relax_perms
KVM: arm64: Pass walk flags to kvm_pgtable_stage2_mkyoung
KVM: arm64: Move host page ownership tracking to the hyp vmemmap
KVM: arm64: Make hyp_page::order a u8
KVM: arm64: Move enum pkvm_page_state to memory.h
KVM: arm64: Change the layout of enum pkvm_page_state
Signed-off-by: Marc Zyngier <maz@kernel.org>
# Conflicts:
# arch/arm64/kvm/arm.c
Merge arm64/for-next/cpufeature to solve extensive conflicts
caused by the CPACR_ELx->CPACR_EL1 repainting.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Refactor nvhe stack code to use NVHE_STACK_SIZE/SHIFT constants,
instead of directly using PAGE_SIZE/SHIFT. This makes the code a bit
easier to read, without introducing any functional changes.
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Link: https://lore.kernel.org/r/20241112003336.1375584-1-kaleshsingh@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Make sure we do not trap access to Allocation Tags.
Fixes: b56680de9c ("KVM: arm64: Initialize trap register values in hyp in pKVM")
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20250106112421.65355-1-vladimir.murzin@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
It appears that on Qualcomm's x1e CPU, CNTVOFF_EL2 doesn't really
work, specially with HCR_EL2.E2H=1.
A non-zero offset results in a screaming virtual timer interrupt,
to the tune of a few 100k interrupts per second on a 4 vcpu VM.
This is also evidenced by this CPU's inability to correctly run
any of the timer selftests.
The only case this doesn't break is when this register is set to 0,
which breaks VM migration.
When HCR_EL2.E2H=0, the timer seems to behave normally, and does
not result in an interrupt storm.
As a workaround, use the fact that this CPU implements FEAT_ECV,
and trap all accesses to the virtual timer and counter, keeping
CNTVOFF_EL2 set to zero, and emulate accesses to CVAL/TVAL/CTL
and the counter itself, fixing up the timer to account for the
missing offset.
And if you think this is disgusting, you'd probably be right.
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241217142321.763801-12-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
We already deal with CNTPCT_EL0 accesses in non-HYP context.
Let's add CNTVCT_EL0 as a good measure.
This is also an opportunity to simplify things and make it
plain that this code is only for non-HYP context handling.
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241217142321.763801-8-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Similarly to handling the physical timer accesses early when FEAT_ECV
causes a trap, we try to handle the physical counter without returning
to the general sysreg handling.
More surprisingly, we introduce something similar for the virtual
counter. Although this isn't necessary yet, it will prove useful on
systems that have a broken CNTVOFF_EL2 implementation. Yes, they exist.
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241217142321.763801-7-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Although FEAT_ECV allows us to correctly emulate the timers, it also
reduces performances pretty badly.
Mitigate this by emulating the CTL/CVAL register reads in the
inner run loop, without returning to the general kernel.
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241217142321.763801-6-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
The vcpu flag GUEST_HAS_SVE is per-vcpu, but it is based on what
is now a per-vm feature. Make the flag per-vm.
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20241216105057.579031-17-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
The vcpu flag GUEST_HAS_PTRAUTH is always associated with the
vcpu PtrAuth features, which are defined per vm rather than per
vcpu.
Remove the flag, and replace it with checks for the features
instead.
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20241216105057.579031-16-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Similar to VHE, calculate the value of cptr_el2 from scratch on
activate traps. This removes the need to store cptr_el2 in every
vcpu structure. Moreover, some traps, such as whether the guest
owns the fp registers, need to be set on every vcpu run.
Reported-by: James Clark <james.clark@linaro.org>
Fixes: 5294afdbf4 ("KVM: arm64: Exclude FP ownership from kvm_vcpu_arch")
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20241216105057.579031-13-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
In hVHE mode, HCR_E2H should be set for both protected and
non-protected VMs. Since commit b56680de9c ("KVM: arm64:
Initialize trap register values in hyp in pKVM"), this has been
fixed, and the setting of the flag here is redundant.
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20241216105057.579031-12-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
The few remaining items needed in fixed_config.h are better
suited for pkvm.h. Move them there and delete it.
No functional change intended.
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20241216105057.579031-11-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
The existing code didn't properly distinguish between signed and
unsigned features, and was difficult to read and to maintain.
Rework it using the same method used in other parts of KVM when
handling vcpu features.
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20241216105057.579031-10-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Now that the VM's feature id registers are initialized with the
values of the supported features, use those values to determine
which traps to set using kvm_has_feature().
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20241216105057.579031-9-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Trap RAS in pKVM if not supported at all for protected VMs. The
RAS version doesn't matter in this case.
Fixes: 2a0c343386 ("KVM: arm64: Initialize trap registers for protected VMs")
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20241216105057.579031-8-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
The hypervisor maintains the state of protected VMs. Initialize
the values for feature ID registers for protected VMs, to be used
when setting traps and when advertising features to protected
VMs.
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20241216105057.579031-7-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Use KVM extension checks as the source for determining which
capabilities are allowed for protected VMs. KVM extension checks
is the natural place for this, since it is also the interface
exposed to users.
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20241216105057.579031-6-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
The hypervisor is responsible for the power state of protected
VMs in pKVM. Therefore, remove KVM_ARM_VCPU_POWER_OFF from the
list of allowed features for protected VMs.
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20241216105057.579031-5-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
At the moment, checks for supported vcpu features for protected
VMs are build-time bugs. In the following patch, they will become
runtime checks based on the vcpu's features registers. Therefore,
consolidate them into one function that would return an error if
it encounters an unsupported feature.
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20241216105057.579031-4-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Group setting protected VM traps by control register rather than
feature id register, since some trap values (e.g., PAuth), depend
on more than one feature id register.
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20241216105057.579031-3-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
The definitions for features allowed and allowed with
restrictions for protected guests, which are based on feature
registers, were defined and checked for separately, even though
they are handled in the same way. This could result in missing
checks for certain features, e.g., pointer authentication,
causing traps for allowed features.
Consolidate the definitions into one. Use that new definition to
construct the guest view of the feature registers for
consistency.
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20241216105057.579031-2-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Introduce the KVM_PGT_CALL() helper macro to allow switching from the
traditional pgtable code to the pKVM version easily in mmu.c. The cost
of this 'indirection' is expected to be very minimal due to
is_protected_kvm_enabled() being backed by a static key.
With this, everything is in place to allow the delegation of
non-protected guest stage-2 page-tables to pKVM, so let's stop using the
host's kvm_s2_mmu from EL2 and enjoy the ride.
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20241218194059.3670226-19-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Introduce a new hypercall to flush the TLBs of non-protected guests. The
host kernel will be responsible for issuing this hypercall after changing
stage-2 permissions using the __pkvm_host_relax_guest_perms() or
__pkvm_host_wrprotect_guest() paths. This is left under the host's
responsibility for performance reasons.
Note however that the TLB maintenance for all *unmap* operations still
remains entirely under the hypervisor's responsibility for security
reasons -- an unmapped page may be donated to another entity, so a stale
TLB entry could be used to leak private data.
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20241218194059.3670226-17-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Plumb the kvm_pgtable_stage2_mkyoung() callback into pKVM for
non-protected guests. It will be called later from the fault handling
path.
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20241218194059.3670226-16-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Plumb the kvm_stage2_test_clear_young() callback into pKVM for
non-protected guest. It will be later be called from MMU notifiers.
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20241218194059.3670226-15-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Introduce a new hypercall to remove the write permission from a
non-protected guest stage-2 mapping. This will be used for e.g. enabling
dirty logging.
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20241218194059.3670226-14-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Introduce a new hypercall allowing the host to relax the stage-2
permissions of mappings in a non-protected guest page-table. It will be
used later once we start allowing RO memslots and dirty logging.
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20241218194059.3670226-13-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
In preparation for letting the host unmap pages from non-protected
guests, introduce a new hypercall implementing the host-unshare-guest
transition.
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20241218194059.3670226-12-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
In preparation for handling guest stage-2 mappings at EL2, introduce a
new pKVM hypercall allowing to share pages with non-protected guests.
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20241218194059.3670226-11-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Rather than look-up the hyp vCPU on every run hypercall at EL2,
introduce a per-CPU 'loaded_hyp_vcpu' tracking variable which is updated
by a pair of load/put hypercalls called directly from
kvm_arch_vcpu_{load,put}() when pKVM is enabled.
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20241218194059.3670226-10-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
In preparation for accessing pkvm_hyp_vm structures at EL2 in a context
where we can't always expect a vCPU to be loaded (e.g. MMU notifiers),
introduce get/put helpers to get temporary references to hyp VMs from
any context.
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20241218194059.3670226-9-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
kvm_pgtable_stage2_relax_perms currently assumes that it is being called
from a 'shared' walker, which will not be true once called from pKVM. To
allow for the re-use of that function, make the walk flags one of its
parameters.
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20241218194059.3670226-7-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
kvm_pgtable_stage2_mkyoung currently assumes that it is being called
from a 'shared' walker, which will not be true once called from pKVM.
To allow for the re-use of that function, make the walk flags one of
its parameters.
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20241218194059.3670226-6-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
We currently store part of the page-tracking state in PTE software bits
for the host, guests and the hypervisor. This is sub-optimal when e.g.
sharing pages as this forces to break block mappings purely to support
this software tracking. This causes an unnecessarily fragmented stage-2
page-table for the host in particular when it shares pages with Secure,
which can lead to measurable regressions. Moreover, having this state
stored in the page-table forces us to do multiple costly walks on the
page transition path, hence causing overhead.
In order to work around these problems, move the host-side page-tracking
logic from SW bits in its stage-2 PTEs to the hypervisor's vmemmap.
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20241218194059.3670226-5-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
