There's no need for fpsimd_sve_sync() to write to CPTR/CPACR. All
relevant traps are always disabled earlier within __kvm_vcpu_run(), when
__deactivate_cptr_traps() configures CPTR/CPACR.
With irrelevant details elided, the flow is:
handle___kvm_vcpu_run(...)
{
flush_hyp_vcpu(...) {
fpsimd_sve_flush(...);
}
__kvm_vcpu_run(...) {
__activate_traps(...) {
__activate_cptr_traps(...);
}
do {
__guest_enter(...);
} while (...);
__deactivate_traps(....) {
__deactivate_cptr_traps(...);
}
}
sync_hyp_vcpu(...) {
fpsimd_sve_sync(...);
}
}
Remove the unnecessary write to CPTR/CPACR. An ISB is still necessary,
so a comment is added to describe this requirement.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250617133718.4014181-5-mark.rutland@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Assigning a value to a system register doesn't do what it is
supposed to be doing if that register is one that has RESx bits.
The main problem is that we use __vcpu_sys_reg(), which can be used
both as a lvalue and rvalue. When used as a lvalue, the bit masking
occurs *before* the new value is assigned, meaning that we (1) do
pointless work on the old cvalue, and (2) potentially assign an
invalid value as we fail to apply the masks to it.
Fix this by providing a new __vcpu_assign_sys_reg() that does
what it says on the tin, and sanitises the *new* value instead of
the old one. This comes with a significant amount of churn.
Reviewed-by: Miguel Luis <miguel.luis@oracle.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250603070824.1192795-2-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
In preparation for supporting stage-2 huge mappings for np-guest. Add a
nr_pages argument to the __pkvm_host_test_clear_young_guest hypercall.
This range supports only two values: 1 or PMD_SIZE / PAGE_SIZE (that is
512 on a 4K-pages system).
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Link: https://lore.kernel.org/r/20250521124834.1070650-7-vdonnefort@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
In preparation for supporting stage-2 huge mappings for np-guest. Add a
nr_pages argument to the __pkvm_host_wrprotect_guest hypercall. This
range supports only two values: 1 or PMD_SIZE / PAGE_SIZE (that is 512
on a 4K-pages system).
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Link: https://lore.kernel.org/r/20250521124834.1070650-6-vdonnefort@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
In preparation for supporting stage-2 huge mappings for np-guest. Add a
nr_pages argument to the __pkvm_host_unshare_guest hypercall. This range
supports only two values: 1 or PMD_SIZE / PAGE_SIZE (that is 512 on a
4K-pages system).
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Link: https://lore.kernel.org/r/20250521124834.1070650-5-vdonnefort@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
In preparation for supporting stage-2 huge mappings for np-guest. Add a
nr_pages argument to the __pkvm_host_share_guest hypercall. This range
supports only two values: 1 or PMD_SIZE / PAGE_SIZE (that is 512 on a
4K-pages system).
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Link: https://lore.kernel.org/r/20250521124834.1070650-4-vdonnefort@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
When dealing with a guest with SVE enabled, make sure the host SVE
state is pinned at EL2 S1, and that the hypervisor vCPU state is
correctly initialised (and then unpinned on teardown).
Co-authored-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20250416152648.2982950-2-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
In non-protected KVM modes, while the guest FPSIMD/SVE/SME state is live on the
CPU, the host's active SVE VL may differ from the guest's maximum SVE VL:
* For VHE hosts, when a VM uses NV, ZCR_EL2 contains a value constrained
by the guest hypervisor, which may be less than or equal to that
guest's maximum VL.
Note: in this case the value of ZCR_EL1 is immaterial due to E2H.
* For nVHE/hVHE hosts, ZCR_EL1 contains a value written by the guest,
which may be less than or greater than the guest's maximum VL.
Note: in this case hyp code traps host SVE usage and lazily restores
ZCR_EL2 to the host's maximum VL, which may be greater than the
guest's maximum VL.
This can be the case between exiting a guest and kvm_arch_vcpu_put_fp().
If a softirq is taken during this period and the softirq handler tries
to use kernel-mode NEON, then the kernel will fail to save the guest's
FPSIMD/SVE state, and will pend a SIGKILL for the current thread.
This happens because kvm_arch_vcpu_ctxsync_fp() binds the guest's live
FPSIMD/SVE state with the guest's maximum SVE VL, and
fpsimd_save_user_state() verifies that the live SVE VL is as expected
before attempting to save the register state:
| if (WARN_ON(sve_get_vl() != vl)) {
| force_signal_inject(SIGKILL, SI_KERNEL, 0, 0);
| return;
| }
Fix this and make this a bit easier to reason about by always eagerly
switching ZCR_EL{1,2} at hyp during guest<->host transitions. With this
happening, there's no need to trap host SVE usage, and the nVHE/nVHE
__deactivate_cptr_traps() logic can be simplified to enable host access
to all present FPSIMD/SVE/SME features.
In protected nVHE/hVHE modes, the host's state is always saved/restored
by hyp, and the guest's state is saved prior to exit to the host, so
from the host's PoV the guest never has live FPSIMD/SVE/SME state, and
the host's ZCR_EL1 is never clobbered by hyp.
Fixes: 8c8010d69c ("KVM: arm64: Save/restore SVE state for nVHE")
Fixes: 2e3cf82063 ("KVM: arm64: nv: Ensure correct VL is loaded before saving SVE state")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250210195226.1215254-9-mark.rutland@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Now that the host eagerly saves its own FPSIMD/SVE/SME state,
non-protected KVM never needs to save the host FPSIMD/SVE/SME state,
and the code to do this is never used. Protected KVM still needs to
save/restore the host FPSIMD/SVE state to avoid leaking guest state to
the host (and to avoid revealing to the host whether the guest used
FPSIMD/SVE/SME), and that code needs to be retained.
Remove the unused code and data structures.
To avoid the need for a stub copy of kvm_hyp_save_fpsimd_host() in the
VHE hyp code, the nVHE/hVHE version is moved into the shared switch
header, where it is only invoked when KVM is in protected mode.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250210195226.1215254-3-mark.rutland@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
The recent changes to debug state management broke self-hosted debug for
guests when running in protected mode, since both the debug owner and
the debug state itself aren't shared with the hyp's view of the vcpu.
Fix it by flushing/syncing the relevant bits with the hyp vcpu.
Fixes: beb470d96c ("KVM: arm64: Use debug_owner to track if debug regs need save/restore")
Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/kvmarm/5f62740f-a065-42d9-9f56-8fb648b9c63f@sirena.org.uk/
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250131222922.1548780-3-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
* kvm-arm64/pkvm-fixed-features-6.14: (24 commits)
: .
: Complete rework of the pKVM handling of features, catching up
: with the rest of the code deals with it these days.
: Patches courtesy of Fuad Tabba. From the cover letter:
:
: "This patch series uses the vm's feature id registers to track the
: supported features, a framework similar to nested virt to set the
: trap values, and removes the need to store cptr_el2 per vcpu in
: favor of setting its value when traps are activated, as VHE mode
: does."
:
: This branch drags the arm64/for-next/cpufeature branch to solve
: ugly conflicts in -next.
: .
KVM: arm64: Fix FEAT_MTE in pKVM
KVM: arm64: Use kvm_vcpu_has_feature() directly for struct kvm
KVM: arm64: Convert the SVE guest vcpu flag to a vm flag
KVM: arm64: Remove PtrAuth guest vcpu flag
KVM: arm64: Fix the value of the CPTR_EL2 RES1 bitmask for nVHE
KVM: arm64: Refactor kvm_reset_cptr_el2()
KVM: arm64: Calculate cptr_el2 traps on activating traps
KVM: arm64: Remove redundant setting of HCR_EL2 trap bit
KVM: arm64: Remove fixed_config.h header
KVM: arm64: Rework specifying restricted features for protected VMs
KVM: arm64: Set protected VM traps based on its view of feature registers
KVM: arm64: Fix RAS trapping in pKVM for protected VMs
KVM: arm64: Initialize feature id registers for protected VMs
KVM: arm64: Use KVM extension checks for allowed protected VM capabilities
KVM: arm64: Remove KVM_ARM_VCPU_POWER_OFF from protected VMs allowed features in pKVM
KVM: arm64: Move checking protected vcpu features to a separate function
KVM: arm64: Group setting traps for protected VMs by control register
KVM: arm64: Consolidate allowed and restricted VM feature checks
arm64/sysreg: Get rid of CPACR_ELx SysregFields
arm64/sysreg: Convert *_EL12 accessors to Mapping
...
Signed-off-by: Marc Zyngier <maz@kernel.org>
# Conflicts:
# arch/arm64/kvm/fpsimd.c
# arch/arm64/kvm/hyp/nvhe/pkvm.c
* kvm-arm64/pkvm-np-guest:
: .
: pKVM support for non-protected guests using the standard MM
: infrastructure, courtesy of Quentin Perret. From the cover letter:
:
: "This series moves the stage-2 page-table management of non-protected
: guests to EL2 when pKVM is enabled. This is only intended as an
: incremental step towards a 'feature-complete' pKVM, there is however a
: lot more that needs to come on top.
:
: With that series applied, pKVM provides near-parity with standard KVM
: from a functional perspective all while Linux no longer touches the
: stage-2 page-tables itself at EL1. The majority of mm-related KVM
: features work out of the box, including MMU notifiers, dirty logging,
: RO memslots and things of that nature. There are however two gotchas:
:
: - We don't support mapping devices into guests: this requires
: additional hypervisor support for tracking the 'state' of devices,
: which will come in a later series. No device assignment until then.
:
: - Stage-2 mappings are forced to page-granularity even when backed by a
: huge page for the sake of simplicity of this series. I'm only aiming
: at functional parity-ish (from userspace's PoV) for now, support for
: HP can be added on top later as a perf improvement."
: .
KVM: arm64: Plumb the pKVM MMU in KVM
KVM: arm64: Introduce the EL1 pKVM MMU
KVM: arm64: Introduce __pkvm_tlb_flush_vmid()
KVM: arm64: Introduce __pkvm_host_mkyoung_guest()
KVM: arm64: Introduce __pkvm_host_test_clear_young_guest()
KVM: arm64: Introduce __pkvm_host_wrprotect_guest()
KVM: arm64: Introduce __pkvm_host_relax_guest_perms()
KVM: arm64: Introduce __pkvm_host_unshare_guest()
KVM: arm64: Introduce __pkvm_host_share_guest()
KVM: arm64: Introduce __pkvm_vcpu_{load,put}()
KVM: arm64: Add {get,put}_pkvm_hyp_vm() helpers
KVM: arm64: Make kvm_pgtable_stage2_init() a static inline function
KVM: arm64: Pass walk flags to kvm_pgtable_stage2_relax_perms
KVM: arm64: Pass walk flags to kvm_pgtable_stage2_mkyoung
KVM: arm64: Move host page ownership tracking to the hyp vmemmap
KVM: arm64: Make hyp_page::order a u8
KVM: arm64: Move enum pkvm_page_state to memory.h
KVM: arm64: Change the layout of enum pkvm_page_state
Signed-off-by: Marc Zyngier <maz@kernel.org>
# Conflicts:
# arch/arm64/kvm/arm.c
Introduce the KVM_PGT_CALL() helper macro to allow switching from the
traditional pgtable code to the pKVM version easily in mmu.c. The cost
of this 'indirection' is expected to be very minimal due to
is_protected_kvm_enabled() being backed by a static key.
With this, everything is in place to allow the delegation of
non-protected guest stage-2 page-tables to pKVM, so let's stop using the
host's kvm_s2_mmu from EL2 and enjoy the ride.
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20241218194059.3670226-19-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Introduce a new hypercall to flush the TLBs of non-protected guests. The
host kernel will be responsible for issuing this hypercall after changing
stage-2 permissions using the __pkvm_host_relax_guest_perms() or
__pkvm_host_wrprotect_guest() paths. This is left under the host's
responsibility for performance reasons.
Note however that the TLB maintenance for all *unmap* operations still
remains entirely under the hypervisor's responsibility for security
reasons -- an unmapped page may be donated to another entity, so a stale
TLB entry could be used to leak private data.
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20241218194059.3670226-17-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Plumb the kvm_pgtable_stage2_mkyoung() callback into pKVM for
non-protected guests. It will be called later from the fault handling
path.
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20241218194059.3670226-16-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Plumb the kvm_stage2_test_clear_young() callback into pKVM for
non-protected guest. It will be later be called from MMU notifiers.
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20241218194059.3670226-15-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Introduce a new hypercall to remove the write permission from a
non-protected guest stage-2 mapping. This will be used for e.g. enabling
dirty logging.
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20241218194059.3670226-14-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Introduce a new hypercall allowing the host to relax the stage-2
permissions of mappings in a non-protected guest page-table. It will be
used later once we start allowing RO memslots and dirty logging.
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20241218194059.3670226-13-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
In preparation for letting the host unmap pages from non-protected
guests, introduce a new hypercall implementing the host-unshare-guest
transition.
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20241218194059.3670226-12-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
In preparation for handling guest stage-2 mappings at EL2, introduce a
new pKVM hypercall allowing to share pages with non-protected guests.
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20241218194059.3670226-11-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Rather than look-up the hyp vCPU on every run hypercall at EL2,
introduce a per-CPU 'loaded_hyp_vcpu' tracking variable which is updated
by a pair of load/put hypercalls called directly from
kvm_arch_vcpu_{load,put}() when pKVM is enabled.
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20241218194059.3670226-10-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Delete the remnants of debug_ptr now that debug registers are selected
based on the debug owner instead.
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241219224116.3941496-11-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
KVM caches MDCR_EL2 on a per-CPU basis in order to preserve the
configuration of MDCR_EL2.HPMN while running a guest. This is a bit
gross, since we're relying on some baked configuration rather than the
hardware definition of implemented counters.
Discover the number of implemented counters by reading PMCR_EL0.N
instead. This works because:
- In VHE the kernel runs at EL2, and N always returns the number of
counters implemented in hardware
- In {n,h}VHE, the EL2 setup code programs MDCR_EL2.HPMN with the EL2
view of PMCR_EL0.N for the host
Lastly, avoid traps under nested virtualization by saving PMCR_EL0.N in
host data.
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241219224116.3941496-3-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
There is no such thing as CPACR_ELx in the architecture.
What we have is CPACR_EL1, for which CPTR_EL12 is an accessor.
Rename CPACR_ELx_* to CPACR_EL1_*, and fix the bit of code using
these names.
Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241219173351.1123087-5-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Handle the initialization of trap registers at the hypervisor in
pKVM, even for non-protected guests. The host is not trusted with
the values of the trap registers, regardless of the VM type.
Therefore, when switching between the host and the guests, only
flush the HCR_EL2 TWI and TWE bits. The host is allowed to
configure these for opportunistic scheduling, as neither affects
the protection of VMs or the hypervisor.
Reported-by: Will Deacon <will@kernel.org>
Fixes: 814ad8f96e ("KVM: arm64: Drop trapping of PAuth instructions/keys")
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20241018074833.2563674-5-tabba@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Move pkvm_vcpu_init_traps() to the initialization of the
hypervisor's vcpu state in init_pkvm_hyp_vcpu(), and remove the
associated hypercall.
In protected mode, traps need to be initialized whenever a VCPU
is initialized anyway, and not only for protected VMs. This also
saves an unnecessary hypercall.
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20241018074833.2563674-2-tabba@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
When pKVM saves and restores the host floating point state on a SVE system,
it programs the vector length in ZCR_EL2.LEN to be whatever the maximum VL
for the PE is. But it uses a buffer allocated with kvm_host_sve_max_vl, the
maximum VL shared by all PEs in the system. This means that if we run on a
system where the maximum VLs are not consistent, we will overflow the buffer
on PEs which support larger VLs.
Since the host will not currently attempt to make use of non-shared VLs, fix
this by explicitly setting the EL2 VL to be the maximum shared VL when we
save and restore. This will enforce the limit on host VL usage. Should we
wish to support asymmetric VLs, this code will need to be updated along with
the required changes for the host:
https://lore.kernel.org/r/20240730-kvm-arm64-fix-pkvm-sve-vl-v6-0-cae8a2e0bd66@kernel.org
Fixes: b5b9955617 ("KVM: arm64: Eagerly restore host fpsimd/sve state in pKVM")
Signed-off-by: Mark Brown <broonie@kernel.org>
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20240912-kvm-arm64-limit-guest-vl-v2-1-dd2c29cb2ac9@kernel.org
[maz: added punctuation to the commit message]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Just like the rest of the FP/SIMD state, FPMR needs to be context
switched.
The only interesting thing here is that we need to treat the pKVM
part a bit differently, as the host FP state is never written back
to the vcpu thread, but instead stored locally and eagerly restored.
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240820131802.3547589-5-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
KVM (and pKVM) do not support SME guests. Therefore KVM ensures
that the host's SME state is flushed and that SME controls for
enabling access to ZA storage and for streaming are disabled.
pKVM needs to protect against a buggy/malicious host. Ensure that
it wouldn't run a guest when protected mode is enabled should any
of the SME controls be enabled.
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20240603122852.3923848-10-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
When running in protected mode we don't want to leak protected
guest state to the host, including whether a guest has used
fpsimd/sve. Therefore, eagerly restore the host state on guest
exit when running in protected mode, which happens only if the
guest has used fpsimd/sve.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20240603122852.3923848-7-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
The same traps controlled by CPTR_EL2 or CPACR_EL1 need to be
toggled in different parts of the code, but the exact bits and
their polarity differ between these two formats and the mode
(vhe/nvhe/hvhe).
To reduce the amount of duplicated code and the chance of getting
the wrong bit/polarity or missing a field, abstract the set/clear
of CPTR_EL2 bits behind a helper.
Since (h)VHE is the way of the future, use the CPACR_EL1 format,
which is a subset of the VHE CPTR_EL2, as a reference.
No functional change intended.
Suggested-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20240603122852.3923848-4-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Consolidate the GICv3 VMCR accessor hypercalls into the APR save/restore
hypercalls so that all of the EL2 GICv3 state is covered by a single pair
of hypercalls.
Signed-off-by: Fuad Tabba <tabba@google.com>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240423150538.2103045-17-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
In retrospect, it is fairly obvious that the FP state ownership
is only meaningful for a given CPU, and that locating this
information in the vcpu was just a mistake.
Move the ownership tracking into the host data structure, and
rename it from fp_state to fp_owner, which is a better description
(name suggested by Mark Brown).
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
As the name of the field indicates, host_fpsimd_state is strictly
a host piece of data, and we reset this pointer on each PID change.
So let's move it where it belongs, and set it at load-time. Although
this is slightly more often, it is a well defined life-cycle which
matches other pieces of data.
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
When SVE is enabled, the host may set bit 16 in SMCCC function IDs, a
hint that indicates an unused SVE state. At the moment NVHE doesn't
account for this bit when inspecting the function ID, and rejects most
calls. Clear the hint bit before comparing function IDs.
About version compatibility: the host's PSCI driver initially probes the
firmware for a SMCCC version number. If the firmware implements a
protocol recent enough (1.3), subsequent SMCCC calls have the hint bit
set. Since the hint bit was reserved in earlier versions of the
protocol, clearing it is fine regardless of the version in use.
When a new hint is added to the protocol in the future, it will be added
to ARM_SMCCC_CALL_HINTS and NVHE will handle it straight away. This
patch only clears known hints and leaves reserved bits as is, because
future SMCCC versions could use reserved bits as modifiers for the
function ID, rather than hints.
Fixes: cfa7ff959a ("arm64: smccc: Support SMCCC v1.3 SVE register saving hint")
Reported-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230911145254.934414-4-jean-philippe@linaro.org
Define __kvm_tlb_flush_vmid_range() (for VHE and nVHE)
to flush a range of stage-2 page-tables using IPA in one go.
If the system supports FEAT_TLBIRANGE, the following patches
would conveniently replace global TLBI such as vmalls12e1is
in the map, unmap, and dirty-logging paths with ripas2e1is
instead.
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230811045127.3308641-10-rananta@google.com
* kvm-arm64/hvhe:
: Support for running split-hypervisor w/VHE, courtesy of Marc Zyngier
:
: From the cover letter:
:
: KVM (on ARMv8.0) and pKVM (on all revisions of the architecture) use
: the split hypervisor model that makes the EL2 code more or less
: standalone. In the later case, we totally ignore the VHE mode and
: stick with the good old v8.0 EL2 setup.
:
: We introduce a new "mode" for KVM called hVHE, in reference to the
: nVHE mode, and indicating that only the hypervisor is using VHE.
KVM: arm64: Fix hVHE init on CPUs where HCR_EL2.E2H is not RES1
arm64: Allow arm64_sw.hvhe on command line
KVM: arm64: Force HCR_E2H in guest context when ARM64_KVM_HVHE is set
KVM: arm64: Program the timer traps with VHE layout in hVHE mode
KVM: arm64: Rework CPTR_EL2 programming for HVHE configuration
KVM: arm64: Adjust EL2 stage-1 leaf AP bits when ARM64_KVM_HVHE is set
KVM: arm64: Disable TTBR1_EL2 when using ARM64_KVM_HVHE
KVM: arm64: Force HCR_EL2.E2H when ARM64_KVM_HVHE is set
KVM: arm64: Key use of VHE instructions in nVHE code off ARM64_KVM_HVHE
KVM: arm64: Remove alternatives from sysreg accessors in VHE hypervisor context
arm64: Use CPACR_EL1 format to set CPTR_EL2 when E2H is set
arm64: Allow EL1 physical timer access when running VHE
arm64: Don't enable VHE for the kernel if OVERRIDE_HVHE is set
arm64: Add KVM_HVHE capability and has_hvhe() predicate
arm64: Turn kaslr_feature_override into a generic SW feature override
arm64: Prevent the use of is_kernel_in_hyp_mode() in hypervisor code
KVM: arm64: Drop is_kernel_in_hyp_mode() from __invalidate_icache_guest_page()
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
* kvm-arm64/ffa-proxy:
: pKVM FF-A Proxy, courtesy Will Deacon and Andrew Walbran
:
: From the cover letter:
:
: pKVM's primary goal is to protect guest pages from a compromised host by
: enforcing access control restrictions using stage-2 page-tables. Sadly,
: this cannot prevent TrustZone from accessing non-secure memory, and a
: compromised host could, for example, perform a 'confused deputy' attack
: by asking TrustZone to use pages that have been donated to protected
: guests. This would effectively allow the host to have TrustZone
: exfiltrate guest secrets on its behalf, hence breaking the isolation
: that pKVM intends to provide.
:
: This series addresses this problem by providing pKVM with the ability to
: monitor SMCs following the Arm FF-A protocol. FF-A provides (among other
: things) a set of memory management APIs allowing the Normal World to
: share, donate or lend pages with Secure. By monitoring these SMCs, pKVM
: can ensure that the pages that are shared, lent or donated to Secure by
: the host kernel are only pages that it owns.
KVM: arm64: pkvm: Add support for fragmented FF-A descriptors
KVM: arm64: Handle FFA_FEATURES call from the host
KVM: arm64: Handle FFA_MEM_LEND calls from the host
KVM: arm64: Handle FFA_MEM_RECLAIM calls from the host
KVM: arm64: Handle FFA_MEM_SHARE calls from the host
KVM: arm64: Add FF-A helpers to share/unshare memory with secure world
KVM: arm64: Handle FFA_RXTX_MAP and FFA_RXTX_UNMAP calls from the host
KVM: arm64: Allocate pages for hypervisor FF-A mailboxes
KVM: arm64: Probe FF-A version and host/hyp partition ID during init
KVM: arm64: Block unsafe FF-A calls from the host
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Just like we repainted the early arm64 code, we need to update
the CPTR_EL2 accesses that are taking place in the nVHE code
when hVHE is used, making them look as if they were CPACR_EL1
accesses. Just like the VHE code.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230609162200.2024064-14-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
When KVM is initialised in protected mode, we must take care to filter
certain FFA calls from the host kernel so that the integrity of guest
and hypervisor memory is maintained and is not made available to the
secure world.
As a first step, intercept and block all memory-related FF-A SMC calls
from the host to EL3 and don't advertise any FF-A features. This puts
the framework in place for handling them properly.
Co-developed-by: Andrew Walbran <qwandor@google.com>
Signed-off-by: Andrew Walbran <qwandor@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20230523101828.7328-2-will@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Broadcast TLB invalidations (TLBIs) targeting the Inner Shareable
Domain are usually less performant than their non-shareable variant.
In particular, we observed some implementations that take
millliseconds to complete parallel broadcasted TLBIs.
It's safe to use non-shareable TLBIs when relaxing permissions on a
PTE in the KVM case. According to the ARM ARM (0487I.a) section
D8.13.1 "Using break-before-make when updating translation table
entries", permission relaxation does not need break-before-make.
Specifically, R_WHZWS states that these are the only changes that
require a break-before-make sequence: changes of memory type
(Shareability or Cacheability), address changes, or changing the block
size.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Link: https://lore.kernel.org/r/20230426172330.1439644-13-ricarkol@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
As a stepping stone towards deprivileging the host's access to the
guest's vCPU structures, introduce some naive flush/sync routines to
copy most of the host vCPU into the hyp vCPU on vCPU run and back
again on return to EL1.
This allows us to run using the pKVM hyp structures when KVM is
initialised in protected mode.
Tested-by: Vincent Donnefort <vdonnefort@google.com>
Co-developed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221110190259.26861-27-will@kernel.org
Introduce a global table (and lock) to track pKVM instances at EL2, and
provide hypercalls that can be used by the untrusted host to create and
destroy pKVM VMs and their vCPUs. pKVM VM/vCPU state is directly
accessible only by the trusted hypervisor (EL2).
Each pKVM VM is directly associated with an untrusted host KVM instance,
and is referenced by the host using an opaque handle. Future patches
will provide hypercalls to allow the host to initialize/set/get pKVM
VM/vCPU state using the opaque handle.
Tested-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Fuad Tabba <tabba@google.com>
Co-developed-by: Will Deacon <will@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
[maz: silence warning on unmap_donated_memory_noclear()]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221110190259.26861-13-will@kernel.org
pkvm_hyp_alloc_private_va_range() can be used to reserve private VA ranges
in the pKVM nVHE hypervisor. Allocations are aligned based on the order of
the requested size.
This will be used to implement stack guard pages for pKVM nVHE hypervisor
(in a subsequent patch in the series).
Credits to Quentin Perret <qperret@google.com> for the idea of moving
private VA allocation out of __pkvm_create_private_mapping()
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220420214317.3303360-3-kaleshsingh@google.com
Introduce an unshare hypercall which can be used to unmap memory from
the hypervisor stage-1 in nVHE protected mode. This will be useful to
update the EL2 ownership state of pages during guest teardown, and
avoids keeping dangling mappings to unreferenced portions of memory.
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211215161232.1480836-14-qperret@google.com
* kvm-arm64/pkvm/fixed-features: (22 commits)
: .
: Add the pKVM fixed feature that allows a bunch of exceptions
: to either be forbidden or be easily handled at EL2.
: .
KVM: arm64: pkvm: Give priority to standard traps over pvm handling
KVM: arm64: pkvm: Pass vpcu instead of kvm to kvm_get_exit_handler_array()
KVM: arm64: pkvm: Move kvm_handle_pvm_restricted around
KVM: arm64: pkvm: Consolidate include files
KVM: arm64: pkvm: Preserve pending SError on exit from AArch32
KVM: arm64: pkvm: Handle GICv3 traps as required
KVM: arm64: pkvm: Drop sysregs that should never be routed to the host
KVM: arm64: pkvm: Drop AArch32-specific registers
KVM: arm64: pkvm: Make the ERR/ERX*_EL1 registers RAZ/WI
KVM: arm64: pkvm: Use a single function to expose all id-regs
KVM: arm64: Fix early exit ptrauth handling
KVM: arm64: Handle protected guests at 32 bits
KVM: arm64: Trap access to pVM restricted features
KVM: arm64: Move sanitized copies of CPU features
KVM: arm64: Initialize trap registers for protected VMs
KVM: arm64: Add handlers for protected VM System Registers
KVM: arm64: Simplify masking out MTE in feature id reg
KVM: arm64: Add missing field descriptor for MDCR_EL2
KVM: arm64: Pass struct kvm to per-EC handlers
KVM: arm64: Move early handlers to per-EC handlers
...
Signed-off-by: Marc Zyngier <maz@kernel.org>
Protected VMs have more restricted features that need to be
trapped. Moreover, the host should not be trusted to set the
appropriate trapping registers and their values.
Initialize the trapping registers, i.e., hcr_el2, mdcr_el2, and
cptr_el2 at EL2 for protected guests, based on the values of the
guest's feature id registers.
No functional change intended as trap handlers introduced in the
previous patch are still not hooked in to the guest exit
handlers.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211010145636.1950948-9-tabba@google.com
hyp-main.c includes switch.h while it only requires adjust-pc.h.
Fix it to remove an unnecessary dependency.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20211010145636.1950948-3-tabba@google.com
After pKVM has been 'finalised' using the __pkvm_prot_finalize hypercall,
the calling CPU will have a Stage-2 translation enabled to prevent access
to memory pages owned by EL2.
Although this forms a significant part of the process to deprivilege the
host kernel, we also need to ensure that the hypercall interface is
reduced so that the EL2 code cannot, for example, be re-initialised using
a new set of vectors.
Re-order the hypercalls so that only a suffix remains available after
finalisation of pKVM.
Cc: Marc Zyngier <maz@kernel.org>
Cc: Quentin Perret <qperret@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211008135839.1193-7-will@kernel.org
The host kernel is currently able to change EL2 stage-1 mappings without
restrictions thanks to the __pkvm_create_mappings() hypercall. But in a
world where the host is no longer part of the TCB, this clearly poses a
problem.
To fix this, introduce a new hypercall to allow the host to share a
physical memory page with the hypervisor, and remove the
__pkvm_create_mappings() variant. The new hypercall implements
ownership and permission checks before allowing the sharing operation,
and it annotates the shared page in the hypervisor stage-1 and host
stage-2 page-tables.
Signed-off-by: Quentin Perret <qperret@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210809152448.1810400-21-qperret@google.com
