With interconnect providers built as modules Qualcomm SM8250 and QCM2290
platforms launches init without /dev/console being backed by the debug
UART.
Build there drivers into the kernel, to make sure the dependencies for
the UART driver are available and thereby give userspace access to the
UART without having to re-open the console, once the deferred UART
driver has probed.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240201-enable-icc-8250-2290-v1-1-8ded02750521@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
These drivers are used on i.MX8QXP based devices.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Qualcomm SA8295P ADP board uses a max20411 to power the GPU
subsystem.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240125-sa8295p-gpu-v4-8-7011c2a63037@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
A number of options got reorganized over time wihtin Kconfig, so make sure
everything is where it belongs in order to simplify defconfig changes
again in the future.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This enables the base drivers necessary to boot devices on the X1E
platform.
The GPU clock controller for SM8450/SM8550 is enabled and the SC8280XP
camera clock controller is enabled, to enable respective functionality
on these platforms.
-----BEGIN PGP SIGNATURE-----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=gd3I
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmWT2PAACgkQYKtH/8kJ
UicnoRAAmTlKuwvNvBL10mtCvt3cX2d+gKbpzaUaWqoa8gA0nfugLXHXWs7kdnf3
CQ4FbVASha33WtjAOjLSJ7cx3n49e6SY/HH5VUt0Rn1B4XzONzd4pHtfdVvTx68c
VVnNEHsZp0tSY0a2XYtNBBxa2HkLk7Z8qCpSDu2gNcSJ27HO3USlOgiuXHHuq0g8
+b9b4f012VelKuao6l3ZZ9TLMVWLbvNpNwrQCTnOAtWC8e5p+2Tno72/H9vs+pUn
NTM5olUcGfrxW1mHZbvMp6TFvcC162xuSb0mlIA1fUodQUodBRjpwGPdzLVXVOAb
b0+3meiPe9x/RPXlbjcvK359FJL/wXY3oQqbpBEn6wssv5gfdR+hg5ZjVwbJxDrz
VDqiJ8Yi+IFWDAJY1Ckz1BD8m8xxOhY0MA8Dfd/VntTO2S8eeA07VtzC+zqhGKkr
XQlu/ZxAx+SPU6DvlIpU7ehdGyngH22tyb64vzbBOi+BxgQTJMv05XFMl3NfL8K1
UyBmHxt5BN2p8TD2lceaqQfB4qEXo16sMPCmUqeMBtuNjNZnOV9RnX0DLu8S3PnM
m5i/lPOrv6q7Se8uShP6SXX8aZdDXj38FTPYZk6sDcG7gf19DeG57X6aUweE1p3f
BHLRiuAMjUtxdjERz/idPmwZuEi5Kxk772iXE9dfigL4zXGYmeQ=
=L0cS
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-defconfig-for-6.8-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/defconfig
A few more Qualcomm Arm64 defconfig updates for v6.8
This enables the base drivers necessary to boot devices on the X1E
platform.
The GPU clock controller for SM8450/SM8550 is enabled and the SC8280XP
camera clock controller is enabled, to enable respective functionality
on these platforms.
* tag 'qcom-arm64-defconfig-for-6.8-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: Enable Qualcomm SC8280XP camera clock controller
arm64: defconfig: enable GPU clock controller for SM8[45]50
arm64: defconfig: Enable X1E80100 SoC base configs
Link: https://lore.kernel.org/r/20231231034648.3262882-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
With the camera clock controller added to the DeviceTree of SC8280XP the
interconnect providers no longer reaches sync_state, resulting in a
noticeable reduction in battery life.
Enable the camera clock controller (as a module) to avoid this, and
hopefully soon provide some level of camera support.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20231221-enable-sc8280xp-camcc-v1-1-2249581dd538@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Those defconfig changes enable booting the MT8173 Chromebooks with the
enablement of the DA9211 regulator driver and adds modules for sound,
AudioDSP, DisplayPort and LVTS Thermal for MT8192/MT8195, and module
for the ChromeOS Keyboard LED backlight which is present on various
Google Chromebooks.
-----BEGIN PGP SIGNATURE-----
iJ4EABYKAEYWIQQn3Xxr56ypAcSHzXSaNgTPrZeEeAUCZXhEZCgcYW5nZWxvZ2lv
YWNjaGluby5kZWxyZWdub0Bjb2xsYWJvcmEuY29tAAoJEJo2BM+tl4R4QEMBAOOy
JjG3vWJmlLjYhaaCZEKK/OvsH2QK+Kf8W9Y9El8CAQDsBq6h5ON9YVolvnNQgxMh
O5e5RO8apsPjpigPZQ6eCA==
=E+UN
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Kl/r
-----END PGP SIGNATURE-----
Merge tag 'mtk-defconfig-for-v6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/defconfig
MediaTek ARM64 defconfig updates for v6.8
Those defconfig changes enable booting the MT8173 Chromebooks with the
enablement of the DA9211 regulator driver and adds modules for sound,
AudioDSP, DisplayPort and LVTS Thermal for MT8192/MT8195, and module
for the ChromeOS Keyboard LED backlight which is present on various
Google Chromebooks.
* tag 'mtk-defconfig-for-v6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux:
arm64: defconfig: Enable configs for MT8195-Cherry-Tomato Chromebook
arm64: defconfig: Enable DA9211 regulator
Link: https://lore.kernel.org/r/20231212114515.121695-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable GCC, Pinctrl and Interconnect configs for Qualcomm's X1E80100 SoC
which is required to boot X1E80100 QCP/CRD boards to a console shell. The
configs are required to be marked as builtin and not modules due to the
console driver dependencies.
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Co-developed-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231205062403.14848-6-quic_sibis@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable the Qualcomm WSA884x driver, used speakers on boards with
Qualcomm SM8550 like QRD8550.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231106073048.24553-1-krzysztof.kozlowski@linaro.org
[bjorn: Rebased on Johan's patch adding SC8280XP and WSA883x, rewrote commit message]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable the Qualcomm QSEECOM interface driver and the UEFI Secure
Application client driver which are needed to access EFI variables on
machines like the Lenovo ThinkPad X13s.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231012080157.4616-3-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable the Qualcomm sc8280xp machine driver and the wsa833x speaker
codec driver that are needed for sound on machines like the Lenovo
ThinkPad X13s.
Note that the wcd938x headphone codec driver is currently implicitly
enabled as it is selected by the sc7280 machine driver.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231012080157.4616-2-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable global clock controller and pinctrl for support the Qualcomm
SM4450 platform to boot to UART console.
The serial engine depends on some global clock controller and pinctrl, but
as the serial console driver is only available as built-in, so the global
clock controller and pinctrl also needs be built-in for the UART device to
probe and register the console.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
Link: https://lore.kernel.org/r/20231129103325.24854-7-quic_tengfan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable missing configs needed to boot the MT8195-Cherry-Tomato
Chromebook with full support on the defconfig.
The configs enabled bring in support for the DSP and sound card,
display, thermal sensor and keyboard backlight.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231122181335.535498-1-nfraprado@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Mediatek mt8173 board fails to boot with DA9211 regulator disabled.
Enabling CONFIG_REGULATOR_DA9211=y in drm-ci fixes the issue.
So enable it in the defconfig since kernel-ci also requires it.
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230911104139.617448-1-vignesh.raman@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Enable Clocks, Pinctrl and Interconnect drivers in the ARM64
defconfig for the Qualcomm SM8650 SoC to boot the SM8650 MTP
(Mobile Test Platform) and QRD (Qualcomm Reference Device) boards.
TCSRCC, GCC, Interconnect, and Pinctrl config are marked as builtin and
not modules due to boot dependencies.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231121-topic-sm8650-upstream-defconfig-v1-1-2500565fc21b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable Global Clock controller, pinctrl and interconnect framework
support for Qualcomm's SDX75 SoC which is required to boot to
console on sdx75-idp platform.
Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20231117055849.534671-1-quic_rohiagar@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
AM62 and other K3 based SoCs use Cadence DPHY and CSI-RX bridge
drivers, along with a DMA wrapper CSI IP for the camera pipeline.
Enable the same to get camera functionality on AM62x-SK, BeaglePlay and
AM62Ax SK among other platforms.
Tested-by: Martyn Welch <martyn.welch@collabora.com>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20231201-csi_dts-v3-1-9f06f31080fe@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Increase CONFIG_SERIAL_8250_NR_UARTS from 4 to 8, the current legacy value
is not adequate for embedded systems that use SoCs where it's common to
have a large number of serial ports.
No need to change CONFIG_SERIAL_8250_RUNTIME_UARTS, see commit 9d86719f87
("serial: 8250: Allow using ports higher than SERIAL_8250_RUNTIME_UARTS").
The need to increase this value was noticed while working with Toradex
Verdin AM62, this board has 4 serial UART instances available to the user
plus an internal one that is connected to a Bluetooth module. Without this
change the fifth UART connected to the BT module is not instantiated and BT
is not working.
Instead of increasing the number to the bare minimum (5) that would be
required to solve this specific issue, we increase this to 8 which seems a
more reasonable number to have in the defconfig and should cover more valid
use cases.
With this change the kernel image size increases by ~3.2kB. bloat-o-meter
summary: add/remove: 1/1 grow/shrink: 7/0 up/down: 3220/-8 (3212)
Cc: Tony Lindgren <tony@atomide.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Francesco Dolcini <francesco@dolcini.it>
Link: https://lore.kernel.org/r/20231201195732.4931-1-francesco@dolcini.it
Signed-off-by: Nishanth Menon <nm@ti.com>
The Programmable Real-time Unit and Industrial Communication Subsystem
Gigabit (PRU_ICSSG) is a low-latency microcontroller subsystem in the TI
K3 SoCs such as AM654x, AM64x. This subsystem is provided for the use
cases like implementation of custom peripheral interfaces, offloading of
tasks from the other processor cores of the SoC, etc.
Currently AM654x-EVM uses ICSSG driver.
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Reviewed-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Link: https://lore.kernel.org/r/20231128084537.3946895-1-danishanwar@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Enable the config for the Renesas VersaClock 3 programmable clock
generator, as it is populated on RZ/{G2L,G2LC} and RZ/V2L SMARC EVKs.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230824083006.88944-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
kernel:
- add initial vmemdup-user-array
core:
- fix platform remove() to return void
- drm_file owner updated to reflect owner
- move size calcs to drm buddy allocator
- let GPUVM build as a module
- allow variable number of run-queues in scheduler
edid:
- handle bad h/v sync_end in EDIDs
panfrost:
- add Boris as maintainer
fbdev:
- use fb_ops helpers more
- only allow logo use from fbcon
- rename fb_pgproto to pgprot_framebuffer
- add HPD state to drm_connector_oob_hotplug_event
- convert to fbdev i/o mem helpers
i915:
- Enable meteorlake by default
- Early Xe2 LPD/Lunarlake display enablement
- Rework subplatforms into IP version checks
- GuC based TLB invalidation for Meteorlake
- Display rework for future Xe driver integration
- LNL FBC features
- LNL display feature capability reads
- update recommended fw versions for DG2+
- drop fastboot module parameter
- added deviceid for Arrowlake-S
- drop preproduction workarounds
- don't disable preemption for resets
- cleanup inlines in headers
- PXP firmware loading fix
- Fix sg list lengths
- DSC PPS state readout/verification
- Add more RPL P/U PCI IDs
- Add new DG2-G12 stepping
- DP enhanced framing support to state checker
- Improve shared link bandwidth management
- stop using GEM macros in display code
- refactor related code into display code
- locally enable W=1 warnings
- remove PSR watchdog timers on LNL
amdgpu:
- RAS/FRU EEPROM updatse
- IP discovery updatses
- GC 11.5 support
- DCN 3.5 support
- VPE 6.1 support
- NBIO 7.11 support
- DML2 support
- lots of IP updates
- use flexible arrays for bo list handling
- W=1 fixes
- Enable seamless boot in more cases
- Enable context type property for HDMI
- Rework GPUVM TLB flushing
- VCN IB start/size alignment fixes
amdkfd:
- GC 10/11 fixes
- GC 11.5 support
- use partial migration in GPU faults
radeon:
- W=1 Fixes
- fix some possible buffer overflow/NULL derefs
nouveau:
- update uapi for NO_PREFETCH
- scheduler/fence fixes
- rework suspend/resume for GSP-RM
- rework display in preparation for GSP-RM
habanalabs:
- uapi: expose tsc clock
- uapi: block access to eventfd through control device
- uapi: force dma-buf export to PAGE_SIZE alignments
- complete move to accel subsystem
- move firmware interface include files
- perform hard reset on PCIe AXI drain event
- optimise user interrupt handling
msm:
- DP: use existing helpers for DPCD
- DPU: interrupts reworked
- gpu: a7xx (a730/a740) support
- decouple msm_drv from kms for headless devices
mediatek:
- MT8188 dsi/dp/edp support
- DDP GAMMA - 12 bit LUT support
- connector dynamic selection capability
rockchip:
- rv1126 mipi-dsi/vop support
- add planar formats
ast:
- rename constants
panels:
- Mitsubishi AA084XE01
- JDI LPM102A188A
- LTK050H3148W-CTA6
ivpu:
- power management fixes
qaic:
- add detach slice bo api
komeda:
- add NV12 writeback
tegra:
- support NVSYNC/NHSYNC
- host1x suspend fixes
ili9882t:
- separate into own driver
-----BEGIN PGP SIGNATURE-----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=l79u
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2023-10-31-1' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"Highlights:
- AMD adds some more upcoming HW platforms
- Intel made Meteorlake stable and started adding Lunarlake
- nouveau has a bunch of display rework in prepartion for the NVIDIA
GSP firmware support
- msm adds a7xx support
- habanalabs has finished migration to accel subsystem
Detail summary:
kernel:
- add initial vmemdup-user-array
core:
- fix platform remove() to return void
- drm_file owner updated to reflect owner
- move size calcs to drm buddy allocator
- let GPUVM build as a module
- allow variable number of run-queues in scheduler
edid:
- handle bad h/v sync_end in EDIDs
panfrost:
- add Boris as maintainer
fbdev:
- use fb_ops helpers more
- only allow logo use from fbcon
- rename fb_pgproto to pgprot_framebuffer
- add HPD state to drm_connector_oob_hotplug_event
- convert to fbdev i/o mem helpers
i915:
- Enable meteorlake by default
- Early Xe2 LPD/Lunarlake display enablement
- Rework subplatforms into IP version checks
- GuC based TLB invalidation for Meteorlake
- Display rework for future Xe driver integration
- LNL FBC features
- LNL display feature capability reads
- update recommended fw versions for DG2+
- drop fastboot module parameter
- added deviceid for Arrowlake-S
- drop preproduction workarounds
- don't disable preemption for resets
- cleanup inlines in headers
- PXP firmware loading fix
- Fix sg list lengths
- DSC PPS state readout/verification
- Add more RPL P/U PCI IDs
- Add new DG2-G12 stepping
- DP enhanced framing support to state checker
- Improve shared link bandwidth management
- stop using GEM macros in display code
- refactor related code into display code
- locally enable W=1 warnings
- remove PSR watchdog timers on LNL
amdgpu:
- RAS/FRU EEPROM updatse
- IP discovery updatses
- GC 11.5 support
- DCN 3.5 support
- VPE 6.1 support
- NBIO 7.11 support
- DML2 support
- lots of IP updates
- use flexible arrays for bo list handling
- W=1 fixes
- Enable seamless boot in more cases
- Enable context type property for HDMI
- Rework GPUVM TLB flushing
- VCN IB start/size alignment fixes
amdkfd:
- GC 10/11 fixes
- GC 11.5 support
- use partial migration in GPU faults
radeon:
- W=1 Fixes
- fix some possible buffer overflow/NULL derefs
nouveau:
- update uapi for NO_PREFETCH
- scheduler/fence fixes
- rework suspend/resume for GSP-RM
- rework display in preparation for GSP-RM
habanalabs:
- uapi: expose tsc clock
- uapi: block access to eventfd through control device
- uapi: force dma-buf export to PAGE_SIZE alignments
- complete move to accel subsystem
- move firmware interface include files
- perform hard reset on PCIe AXI drain event
- optimise user interrupt handling
msm:
- DP: use existing helpers for DPCD
- DPU: interrupts reworked
- gpu: a7xx (a730/a740) support
- decouple msm_drv from kms for headless devices
mediatek:
- MT8188 dsi/dp/edp support
- DDP GAMMA - 12 bit LUT support
- connector dynamic selection capability
rockchip:
- rv1126 mipi-dsi/vop support
- add planar formats
ast:
- rename constants
panels:
- Mitsubishi AA084XE01
- JDI LPM102A188A
- LTK050H3148W-CTA6
ivpu:
- power management fixes
qaic:
- add detach slice bo api
komeda:
- add NV12 writeback
tegra:
- support NVSYNC/NHSYNC
- host1x suspend fixes
ili9882t:
- separate into own driver"
* tag 'drm-next-2023-10-31-1' of git://anongit.freedesktop.org/drm/drm: (1803 commits)
drm/amdgpu: Remove unused variables from amdgpu_show_fdinfo
drm/amdgpu: Remove duplicate fdinfo fields
drm/amd/amdgpu: avoid to disable gfxhub interrupt when driver is unloaded
drm/amdgpu: Add EXT_COHERENT support for APU and NUMA systems
drm/amdgpu: Retrieve CE count from ce_count_lo_chip in EccInfo table
drm/amdgpu: Identify data parity error corrected in replay mode
drm/amdgpu: Fix typo in IP discovery parsing
drm/amd/display: fix S/G display enablement
drm/amdxcp: fix amdxcp unloads incompletely
drm/amd/amdgpu: fix the GPU power print error in pm info
drm/amdgpu: Use pcie domain of xcc acpi objects
drm/amd: check num of link levels when update pcie param
drm/amdgpu: Add a read to GFX v9.4.3 ring test
drm/amd/pm: call smu_cmn_get_smc_version in is_mode1_reset_supported.
drm/amdgpu: get RAS poison status from DF v4_6_2
drm/amdgpu: Use discovery table's subrevision
drm/amd/display: 3.2.256
drm/amd/display: add interface to query SubVP status
drm/amd/display: Read before writing Backlight Mode Set Register
drm/amd/display: Disable SYMCLK32_SE RCO on DCN314
...
- Add LKDTM test for stuck CPUs (Mark Rutland)
- Improve LKDTM selftest behavior under UBSan (Ricardo Cañuelo)
- Refactor more 1-element arrays into flexible arrays (Gustavo A. R. Silva)
- Analyze and replace strlcpy and strncpy uses (Justin Stitt, Azeem Shaikh)
- Convert group_info.usage to refcount_t (Elena Reshetova)
- Add __counted_by annotations (Kees Cook, Gustavo A. R. Silva)
- Add Kconfig fragment for basic hardening options (Kees Cook, Lukas Bulwahn)
- Fix randstruct GCC plugin performance mode to stay in groups (Kees Cook)
- Fix strtomem() compile-time check for small sources (Kees Cook)
-----BEGIN PGP SIGNATURE-----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=0iVF
-----END PGP SIGNATURE-----
Merge tag 'hardening-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"One of the more voluminous set of changes is for adding the new
__counted_by annotation[1] to gain run-time bounds checking of
dynamically sized arrays with UBSan.
- Add LKDTM test for stuck CPUs (Mark Rutland)
- Improve LKDTM selftest behavior under UBSan (Ricardo Cañuelo)
- Refactor more 1-element arrays into flexible arrays (Gustavo A. R.
Silva)
- Analyze and replace strlcpy and strncpy uses (Justin Stitt, Azeem
Shaikh)
- Convert group_info.usage to refcount_t (Elena Reshetova)
- Add __counted_by annotations (Kees Cook, Gustavo A. R. Silva)
- Add Kconfig fragment for basic hardening options (Kees Cook, Lukas
Bulwahn)
- Fix randstruct GCC plugin performance mode to stay in groups (Kees
Cook)
- Fix strtomem() compile-time check for small sources (Kees Cook)"
* tag 'hardening-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (56 commits)
hwmon: (acpi_power_meter) replace open-coded kmemdup_nul
reset: Annotate struct reset_control_array with __counted_by
kexec: Annotate struct crash_mem with __counted_by
virtio_console: Annotate struct port_buffer with __counted_by
ima: Add __counted_by for struct modsig and use struct_size()
MAINTAINERS: Include stackleak paths in hardening entry
string: Adjust strtomem() logic to allow for smaller sources
hardening: x86: drop reference to removed config AMD_IOMMU_V2
randstruct: Fix gcc-plugin performance mode to stay in group
mailbox: zynqmp: Annotate struct zynqmp_ipi_pdata with __counted_by
drivers: thermal: tsens: Annotate struct tsens_priv with __counted_by
irqchip/imx-intmux: Annotate struct intmux_data with __counted_by
KVM: Annotate struct kvm_irq_routing_table with __counted_by
virt: acrn: Annotate struct vm_memory_region_batch with __counted_by
hwmon: Annotate struct gsc_hwmon_platform_data with __counted_by
sparc: Annotate struct cpuinfo_tree with __counted_by
isdn: kcapi: replace deprecated strncpy with strscpy_pad
isdn: replace deprecated strncpy with strscpy
NFS/flexfiles: Annotate struct nfs4_ff_layout_segment with __counted_by
nfs41: Annotate struct nfs4_file_layout_dsaddr with __counted_by
...
drm-misc-next for v6.7-rc1:
drm-misc-next-2023-10-19 + following:
UAPI Changes:
Cross-subsystem Changes:
- Convert fbdev drivers to use fbdev i/o mem helpers.
Core Changes:
- Use cross-references for macros in docs.
- Make drm_client_buffer_addb use addfb2.
- Add NV20 and NV30 YUV formats.
- Documentation updates for create_dumb ioctl.
- CI fixes.
- Allow variable number of run-queues in scheduler.
Driver Changes:
- Rename drm/ast constants.
- Make ili9882t its own driver.
- Assorted fixes in ivpu, vc4, bridge/synopsis, amdgpu.
- Add planar formats to rockchip.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3d92fae8-9b1b-4165-9ca8-5fda11ee146b@linux.intel.com
This enables the Qualcomm PMIC-based USB Type-C port manager, found in
e.g. SM8250, and hence RB5, as well as the Type-C DisplayPort altmode
support to get display working on the same.
-----BEGIN PGP SIGNATURE-----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=zcki
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=piQJ
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-defconfig-for-6.7-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/defconfig
Few more ARM64 defconfig updates for v6.7
This enables the Qualcomm PMIC-based USB Type-C port manager, found in
e.g. SM8250, and hence RB5, as well as the Type-C DisplayPort altmode
support to get display working on the same.
* tag 'qcom-arm64-defconfig-for-6.7-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: enable DisplayPort altmode support
arm64: defconfig: enable CONFIG_TYPEC_QCOM_PMIC
Link: https://lore.kernel.org/r/20231025191841.1015192-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
DRM_PANEL_ILITEK_ILI9882T is being split out from
DRM_PANEL_BOE_TV101WUM_NL6. Since the arm64 defconfig had the BOE
panel driver enabled, let's also enable the Ilitek driver.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Cong Yang <yangcong5@huaqin.corp-partner.google.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231013091844.804310-4-yangcong5@huaqin.corp-partner.google.com
Enable the DisplayPort altmode, it is required to get DisplayPort output
to work on devices like Qualcomm Robotics RB5 platform.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewd-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20231011103245.96638-2-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
- add various drivers for Amlogic based boards
- KEYBOARD_GPIO_POLLED=m used to support buttons on pre-G12A boards
- KHADAS_MCU_FAN_THERMAL=m & MFD_KHADAS_MCU=m to control FAN over the MCU on Khadas VIM boards
- MEDIA_CEC_SUPPORT=y & CEC_MESON_G12A_AO=m to enable the CEC bus
- RTC_DRV_PCF8563=m to enable support for RTC on most SBC boards
- VIDEO_MESON_VDEC=m to enable HW Video Decoder
- MESON_DDR_PMU=m to enable DDR PMU perf driver on G12A & SM1 SoCs
-----BEGIN PGP SIGNATURE-----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=dyV8
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=1hSh
-----END PGP SIGNATURE-----
Merge tag 'amlogic-defconfig-for-v6.7' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/defconfig
Amlogic defconfig changes for v6.7:
- add various drivers for Amlogic based boards
- KEYBOARD_GPIO_POLLED=m used to support buttons on pre-G12A boards
- KHADAS_MCU_FAN_THERMAL=m & MFD_KHADAS_MCU=m to control FAN over the MCU on Khadas VIM boards
- MEDIA_CEC_SUPPORT=y & CEC_MESON_G12A_AO=m to enable the CEC bus
- RTC_DRV_PCF8563=m to enable support for RTC on most SBC boards
- VIDEO_MESON_VDEC=m to enable HW Video Decoder
- MESON_DDR_PMU=m to enable DDR PMU perf driver on G12A & SM1 SoCs
* tag 'amlogic-defconfig-for-v6.7' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
arm64: defconfig: add various drivers for Amlogic based boards
Link: https://lore.kernel.org/r/2e08bd06-09e0-4352-8207-bc3b5d26fba4@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This enables the NB7VPQ904M SuperSpeed redriver driver, used in SM8550,
the LPASS pinctrl driver for SM6115 and SM8350 and the M31 USB phy
driver found in IPQ5332.
-----BEGIN PGP SIGNATURE-----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=76AT
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=3jl/
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-defconfig-for-6.7' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/defconfig
Qualcomm ARM64 defconfig updates for v6.7
This enables the NB7VPQ904M SuperSpeed redriver driver, used in SM8550,
the LPASS pinctrl driver for SM6115 and SM8350 and the M31 USB phy
driver found in IPQ5332.
* tag 'qcom-arm64-defconfig-for-6.7' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: Enable M31 USB phy driver
arm64: defconfig: enable Qualcomm SM6115 LPASS pinctrl
arm64: defconfig: enable Qualcomm SM8350 LPASS pinctrl
arm64: defconfig: enable NB7VPQ904M driver as module
Link: https://lore.kernel.org/r/20231015201812.855218-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable drivers for the hardware blocks present on the Amlogic Meson SoC
based boards: Khadas VIM3 and Hardkernel Odroid N2 to increase testing
coverage.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231012103600.3381340-1-m.szyprowski@samsung.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
SK-AM62A-LP uses TPS6593x PMIC (interfaced over I2C) to power the SoC
and various other peripherals on the board [1].
Specifically, the audio codec (TLV320AIC3106) on the board relies on the
PMIC for the DVDD (1.8V) supply.
[1]: https://www.ti.com/lit/zip/sprr459
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20231003-mcasp_am62a-v3-6-2b631ff319ca@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Enable the generic syscon-poweroff driver used on all Exynos ARM64 SoCs
(e.g. Exynos5433) and few APM SoCs.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20230901115732.45854-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
There is no code for this config option and enabling it in defconfig
causes warnings from tools which are detecting unused and obsolete
kernel config flags since the flag will be completely missing from
effective build config after "make olddefconfig".
Fixes yocto kernel recipe build time warning:
WARNING: [kernel config]: This BSP contains fragments with warnings:
...
[INFO]: the following symbols were not found in the active
configuration:
- CONFIG_COMMON_CLK_NPCM8XX
The flag was added with commit 45472f1e53
v5.19-rc4-15-g45472f1e5348 so 6.1 and 6.4 stable kernel trees are
affected.
Fixes: 45472f1e53 ("arm64: defconfig: Add Nuvoton NPCM family support")
Cc: stable@kernel.org
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Bjorn Andersson <quic_bjorande@quicinc.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Tomer Maimon <tmaimon77@gmail.com>
Cc: Bruce Ashfield <bruce.ashfield@gmail.com>
Cc: Jon Mason <jon.mason@arm.com>
Cc: Jon Mason <jdmason@kudzu.us>
Cc: Ross Burton <ross@burtonini.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mikko Rapeli <mikko.rapeli@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This driver, together with GPIO delay, is required for TQMa8MxML based
boards to use LVDS output.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable CONFIG_USB_MASS_STORAGE so that it is possible to
mount the eMMC content in the PC by doing:
modprobe g_mass_storage file=/dev/mmcblk1 removable=1
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Inspired by Salvatore Mesoraca's earlier[1] efforts to provide some
in-tree guidance for kernel hardening Kconfig options, add a new fragment
named "hardening-basic.config" (along with some arch-specific fragments)
that enable a basic set of kernel hardening options that have the least
(or no) performance impact and remove a reasonable set of legacy APIs.
Using this fragment is as simple as running "make hardening.config".
More extreme fragments can be added[2] in the future to cover all the
recognized hardening options, and more per-architecture files can be
added too.
For now, document the fragments directly via comments. Perhaps .rst
documentation can be generated from them in the future (rather than the
other way around).
[1] https://lore.kernel.org/kernel-hardening/1536516257-30871-1-git-send-email-s.mesoraca16@gmail.com/
[2] https://github.com/KSPP/linux/issues/14
Cc: Salvatore Mesoraca <s.mesoraca16@gmail.com>
Cc: x86@kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-doc@vger.kernel.org
Cc: linux-kbuild@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
- Enable -Wenum-conversion warning option
- Refactor the rpm-pkg target
- Fix scripts/setlocalversion to consider annotated tags for rt-kernel
- Add a jump key feature for the search menu of 'make nconfig'
- Support Qt6 for 'make xconfig'
- Enable -Wformat-overflow, -Wformat-truncation, -Wstringop-overflow, and
-Wrestrict warnings for W=1 builds
- Replace <asm/export.h> with <linux/export.h> for alpha, ia64, and sparc
- Support DEB_BUILD_OPTIONS=parallel=N for the debian source package
- Refactor scripts/Makefile.modinst and fix some modules_sign issues
- Add a new Kconfig env variable to warn symbols that are not defined anywhere
- Show help messages of config fragments in 'make help'
-----BEGIN PGP SIGNATURE-----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=lfUi
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Enable -Wenum-conversion warning option
- Refactor the rpm-pkg target
- Fix scripts/setlocalversion to consider annotated tags for rt-kernel
- Add a jump key feature for the search menu of 'make nconfig'
- Support Qt6 for 'make xconfig'
- Enable -Wformat-overflow, -Wformat-truncation, -Wstringop-overflow,
and -Wrestrict warnings for W=1 builds
- Replace <asm/export.h> with <linux/export.h> for alpha, ia64, and
sparc
- Support DEB_BUILD_OPTIONS=parallel=N for the debian source package
- Refactor scripts/Makefile.modinst and fix some modules_sign issues
- Add a new Kconfig env variable to warn symbols that are not defined
anywhere
- Show help messages of config fragments in 'make help'
* tag 'kbuild-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (62 commits)
kconfig: fix possible buffer overflow
kbuild: Show marked Kconfig fragments in "help"
kconfig: add warn-unknown-symbols sanity check
kbuild: dummy-tools: make MPROFILE_KERNEL checks work on BE
Documentation/llvm: refresh docs
modpost: Skip .llvm.call-graph-profile section check
kbuild: support modules_sign for external modules as well
kbuild: support 'make modules_sign' with CONFIG_MODULE_SIG_ALL=n
kbuild: move more module installation code to scripts/Makefile.modinst
kbuild: reduce the number of mkdir calls during modules_install
kbuild: remove $(MODLIB)/source symlink
kbuild: move depmod rule to scripts/Makefile.modinst
kbuild: add modules_sign to no-{compiler,sync-config}-targets
kbuild: do not run depmod for 'make modules_sign'
kbuild: deb-pkg: support DEB_BUILD_OPTIONS=parallel=N in debian/rules
alpha: remove <asm/export.h>
alpha: replace #include <asm/export.h> with #include <linux/export.h>
ia64: remove <asm/export.h>
ia64: replace #include <asm/export.h> with #include <linux/export.h>
sparc: remove <asm/export.h>
...
Currently the Kconfig fragments in kernel/configs and arch/*/configs
that aren't used internally aren't discoverable through "make help",
which consists of hard-coded lists of config fragments. Instead, list
all the fragment targets that have a "# Help: " comment prefix so the
targets can be generated dynamically.
Add logic to the Makefile to search for and display the fragment and
comment. Add comments to fragments that are intended to be direct targets.
Signed-off-by: Kees Cook <keescook@chromium.org>
Co-developed-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
-----BEGIN PGP SIGNATURE-----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=yuz5
-----END PGP SIGNATURE-----
Merge tag 'media/v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- new i2c drivers: ds90ub913, ds90ub953, ds90ub960, dw9719, ds90ub913
- new Intel IVSC MEI drivers
- some Mediatek platform drivers were moved to a common location
- Intel atomisp2 driver is now working with the main ov2680 driver. Due
to that, the atomisp2 ov2680 staging one was removed
- the bttv driver was finally converted to videobuf2 framework. This
was the last one upstream using videobuf version 1 core. We'll likely
remove the old videobuf framework on 6.7
- lots of improvements at atomisp driver: it now works with normal I2C
sensors. Several compile-mode dependecies to select between ISP2400
and ISP2401 are now solved in runtime
- a new ipu-bridge logic was added to work with IVSC MEI drivers
- venus driver gained better support for new VPU versions
- the v4l core async framework has gained lots of improvements and
cleanups
- lots of other cleanups, improvements and driver fixes
* tag 'media/v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (358 commits)
media: ivsc: Add ACPI dependency
media: bttv: convert to vb2
media: bttv: use audio defaults for winfast2000
media: bttv: refactor bttv_set_dma()
media: bttv: move vbi_skip/vbi_count out of buffer
media: bttv: remove crop info from bttv_buffer
media: bttv: remove tvnorm field from bttv_buffer
media: bttv: remove format field from bttv_buffer
media: bttv: move do_crop flag out of bttv_fh
media: bttv: copy vbi_fmt from bttv_fh
media: bttv: copy vid fmt/width/height from fh
media: bttv: radio use v4l2_fh instead of bttv_fh
media: bttv: replace BUG with WARN_ON
media: bttv: use video_drvdata to get bttv
media: i2c: rdacm21: Fix uninitialized value
media: coda: Remove duplicated include
media: vivid: fix the racy dev->radio_tx_rds_owner
media: i2c: ccs: Check rules is non-NULL
media: i2c: ds90ub960: Fix PLL config for 1200 MHz CSI rate
media: i2c: ds90ub953: Fix use of uninitialized variables
...
This marks the MSM8996 global clock controller as buildin, to avoid boot
issues. The SC8280XP GPU clock controller is enabled, to enable GPU
support. A series of drivers needed to boot the IPQ5018 platform is
enabled, and the ethernet PHY to enable Ethernet on SA8775P is enabled.
-----BEGIN PGP SIGNATURE-----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=Fk9Y
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=2aFg
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-defconfig-for-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/defconfig
Qualcomm ARM64 defconfig updates for v6.6
This marks the MSM8996 global clock controller as buildin, to avoid boot
issues. The SC8280XP GPU clock controller is enabled, to enable GPU
support. A series of drivers needed to boot the IPQ5018 platform is
enabled, and the ethernet PHY to enable Ethernet on SA8775P is enabled.
* tag 'qcom-arm64-defconfig-for-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: Enable IPQ5018 SoC base configs
arm64: defconfig: enable the SerDes PHY for Qualcomm DWMAC
arm64: defconfig: enable Qualcomm MSM8996 Global Clock Controller as built-in
arm64: defconfig: Enable Qualcomm SC8280XP GPUCC
Link: https://lore.kernel.org/r/20230818023651.2484774-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable CONFIG_DRM_ITE_IT66121.
ILITEK ITE-IT66121 is an HDMI transmitter, which takes parallel video
signals (DPI) as input. It is being used on TI's AM625 SoC based
BeaglePlay platform[0].
[0]: https://beagleboard.org/play
Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Link: https://lore.kernel.org/r/20230809084559.17322-7-a-bhatia1@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Enable CONFIG_DRM_IMX_LCDIF so that display output can be functional
by default on the imx8mp-evk board.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
CONFIG_VIDEO_IMX_MEDIA isn't needed on arm64 platforms since commit
9f257f502c ("media: imx: Unstage the imx7-media-csi driver") which
moved the last arm64 driver depending on that Kconfig symbol out of
staging. Drop it from the arm64 defconfig.
Fixes: 9f257f502c ("media: imx: Unstage the imx7-media-csi driver")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The Programmable Realtime Unit - Industrial Communication Subsystem
(PRU-ICSS) known as PRUSS, is a low-latency microcontroller subsystem
used for industrial networking and other hard real-time functions in
the TI K3 SoCs such as AM654x, AM64x.
AM654x-EVM, AM64xx-EVM, and iot2050 use the PRUSS driver.
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konradybcio@kernel.org>
Link: https://lore.kernel.org/r/20230808130131.3081482-1-danishanwar@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Enable TI ECAP, DP83869 driver, OMAP2 Mailbox, K3 remote proc
SND_SOC_J721E_EVM, MCAN, UFS and RTI, Thermal driver to be built
as module.
These configs are supported on below TI platforms
ECAP on am642, am65 iot2050 EVM.
DP83869 on AM64x EVM.
OMAP2 Mailbox, K3 remote proc on AM64 on J7200,J721E and J784S4 SOC.
CONFIG_SND_SOC_J721E_EVM on J721E.
MCAN on AM68 SK, J721E, J721S2, AM642 AM642-Phyboards
UFS feature on J721E EVM
RTI watchdog on AM62, AM62A, AM64, AM65, J721E and J7200 SOC.
Thermal driver on AM62, AM62A AM65, J7200, J721E, J721S2,
J784S4 platform.
Signed-off-by: Udit Kumar <u-kumar1@ti.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230731161048.2522154-1-u-kumar1@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Enable driver for Bluetooth NXP UART applicable amongst others for NXP
88W8997 and IW416 as found on multiple Toradex SoMs.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
These drivers are used on i.MX93 based devices.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Commit a2225d931f ("autofs: remove left-over autofs4 stubs")
promised the removal of the fs/autofs/Kconfig fragment for AUTOFS4_FS
within a couple of releases, but five years later this still has not
happened yet, and AUTOFS4_FS is still enabled in 63 defconfigs.
Get rid of it mechanically:
git grep -l CONFIG_AUTOFS4_FS -- '*defconfig' |
xargs sed -i 's/AUTOFS4_FS/AUTOFS_FS/'
Also just remove the AUTOFS4_FS config option stub. Anybody who hasn't
regenerated their config file in the last five years will need to just
get the new name right when they do.
Signed-off-by: Sven Joachim <svenjoac@gmx.de>
Acked-by: Ian Kent <raven@themaw.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hardkernel Odroid-M1 board is supported since commit fd35832677
("arm64: dts: rockchip: Add Hardkernel ODROID-M1 board"). Enable all
drivers needed by that board in the defconfig to let the automated
test systems to check them on the real hardware.
The drivers were configured to be compiled as modules if that was
supported.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20230720080838.933890-1-m.szyprowski@samsung.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
roc-rk3328-cc board has vcc_sdio regulator controlled by a special
output only gpio pin. This special pin can now be reference as
<&grf_gpio 0> via gpio-syscon driver, as mentioned in below commit.
commit <99165b93dafe> ("arm64: dts: rockchip: add sdmmc UHS support for
roc-rk3328-cc")
So, enable bydefault on the defconfig.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20230719102427.3617577-1-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
i.MX8ULP relies remoteproc and rpmsg enabled to communicate with CM33
for boot purpose, because some boot related things are handled by
CM33.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Kontron sl28 board is supported upstream and also tested in the
KernelCI. Enable support for its VPD EEPROM where the base ethernet
address is stored.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable the SGMII/SerDes PHY driver. This module is required to enable
ethernet on Qualcomm sa8775p platforms.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230622121141.218623-1-brgl@bgdev.pl
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The Rockchip one-time programmable memory driver provides access to
various SoC specific information, e.g. leakage currents of the
CPU/GPU/NPU components found on a RK3588 SoC.
Enable the driver as built-in to allow client device drivers (e.g.
cpufreq) to access the required data for proper settings adjustment.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20230710190107.32451-1-cristian.ciocaltea@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Rockchip RK3588 SoC has NaNeng IP PHY block used for PCIe, USB3, SATA
and SGMII.
Enable Rockchip NaNeng PHY driver.
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Link: https://lore.kernel.org/r/20230713143941.1756849-4-jagan@edgeble.ai
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Enable PMIC RAA215300 and ISL 1208 configs, as it is populated
on Renesas RZ/{G2L,V2L} SMARC EVKs.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230703144108.413938-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Enable PWM config for Renesas MTU3a PWM as it is populated on
RZ/{G2L, LC, UL} and RZ/V2L SMARC EVKs.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230703132706.355237-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The commit 8f680c2874 ("arm64: defconfig: Switch msm8996 clk drivers
to module") switched CONFIG_MSM_MMCC_8996 to module, which also resulted
in CONFIG_MSM_GCC_8996 being switched to module. This breaks useful
bootflow for Qualcomm MSM8996 / APQ8096 platforms, because the serial is
not enabled anymore until the GCC module is loaded.
Reported-by: Rob Clark <robdclark@gmail.com>
Fixes: 8f680c2874 ("arm64: defconfig: Switch msm8996 clk drivers to module")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230619125404.562137-1-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The arm64 defconfig file gets the usual updates to enable addition
device drivers as well as the sparx5 and realtek SoC platforms.
For arm32, there are only a couple of cleanup patches for imx,
renesas and rockchips.
-----BEGIN PGP SIGNATURE-----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=dufW
-----END PGP SIGNATURE-----
Merge tag 'soc-defconfig-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC defconfig updates from Arnd Bergmann:
"The arm64 defconfig file gets the usual updates to enable addition
device drivers as well as the sparx5 and realtek SoC platforms.
For arm32, there are only a couple of cleanup patches for imx, renesas
and rockchips"
* tag 'soc-defconfig-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (23 commits)
arm64: defconfig: Enable Rockchip I2S TDM and ES8316 drivers
arm64: defconfig: update RK8XX MFD config
ARM: multi_v7_defconfig: update MFD_RK808 name
arm64: defconfig: Enable UBIFS
arm64: defconfig: enable drivers for Verdin AM62
arm64: defconfig: Build SM6115 display and GPU clock controller drivers
arm64: defconfig: Build display clock controller driver for QCM2290
arm64: defconfig: Build interconnect driver for QCM2290
arm64: defconfig: Build Global Clock Controller driver for QCM2290
arm64: defconfig: Build MSM power manager driver
arm64: defconfig: Enable sc828x0xp lpasscc clock controller
arm64: defconfig: Enable the TI SN65DSI83 driver
arm64: defconfig: Enable Renesas MTU3a counter config
arm64: defconfig: enable Mediatek PMIC key
arm64: defconfig: enable MT6357 regulator
ARM: imx_v6_v7_defconfig: Remove KERNEL_LZO config
arm64: defconfig: Enable ipq6018 apss clock and PLL controller
arm64: defconfig: Enable ARCH_SPARX5 and ARCH_REALTEK
arm64: defconfig: enable FSA4480 driver as module
ARM: shmobile: defconfig: Refresh for v6.4-rc1
...
The Rockchip I2S TDM driver and the Everest Semi ES8316 codec are used
to provide analog audio support on the RK3588 SoC based Rock 5B board.
Enable both of them as modules.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Update the defconfig for the new RK8XX MFD config name,
which got split to add SPI support.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixes: c20e8c5b12 ("mfd: rk808: Split into core and i2c")
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This enables various clock drivers for QCM2290, SM6115 and SC8280XP.
Furhter, the interconnect and the MSM power manageer (MPM) drivers are
enabled to allow QCM2290 to boot.
-----BEGIN PGP SIGNATURE-----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=zoNR
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=5ZnG
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-defconfig-for-6.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/defconfig
More Qualcomm ARM64 defconfig updates for v6.5
This enables various clock drivers for QCM2290, SM6115 and SC8280XP.
Furhter, the interconnect and the MSM power manageer (MPM) drivers are
enabled to allow QCM2290 to boot.
* tag 'qcom-arm64-defconfig-for-6.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: Build SM6115 display and GPU clock controller drivers
arm64: defconfig: Build display clock controller driver for QCM2290
arm64: defconfig: Build interconnect driver for QCM2290
arm64: defconfig: Build Global Clock Controller driver for QCM2290
arm64: defconfig: Build MSM power manager driver
arm64: defconfig: Enable sc828x0xp lpasscc clock controller
Link: https://lore.kernel.org/r/20230615154119.1460952-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable the FSA4480 driver to enable USB Type-C altmode on devices such
as SM8350 and SM8450 HDK. Enable the IPQ6018 APSS clock and PLL
controller for CPU scaling, and enable GPU clock river for SA8775P.
-----BEGIN PGP SIGNATURE-----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=JwVj
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=8Zrt
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-defconfig-for-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/defconfig
Qualcomm ARM64 defconfig updates for v6.5
Enable the FSA4480 driver to enable USB Type-C altmode on devices such
as SM8350 and SM8450 HDK. Enable the IPQ6018 APSS clock and PLL
controller for CPU scaling, and enable GPU clock river for SA8775P.
* tag 'qcom-arm64-defconfig-for-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: Enable ipq6018 apss clock and PLL controller
arm64: defconfig: enable FSA4480 driver as module
arm64: defconfig: enable the SA8775P GPUCC driver
Link: https://lore.kernel.org/r/20230610170955.2478831-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Highlights:
----------
STM32MP25 family is composed of 4 SoCs defined as following:
-STM32MP251: common part composed of 1*Cortex-A35,
common peripherals like SDMMC, UART, SPI, I2C, PCIe, USB3,
parallel and DSI display, 1*ETH ...
-STM32MP253: STM32MP251 + 1*Cortex-A35 (dual CPU), a second ETH,
CAN-FD and LVDS display.
-STM32MP255: STM32MP253 + GPU/AI and video encode/decode.
-STM32MP257: STM32MP255 + ETH TSN switch (2+1 ports).
A second diversity layer exists for security features/A35 frequency:
-STM32MP25xY, "Y" gives information:
-Y = A means A35@1.2GHz + no cryp IP and no secure boot.
-Y = C means A35@1.2GHz + cryp IP and secure boot.
-Y = D means A35@1.5GHz + no cryp IP and no secure boot.
-Y = F means A35@1.5GHz + cryp IP and secure boot.
This PR adds the STM32MP257F EV1 board support. This board embeds a
STM32MP257FAI SoC, with 4GB of DDR4, TSN switch (2+1 ports),
2*USB typeA, 1*USB2 typeC, SNOR OctoSPI, mini PCIe, STPMIC2 for power distribution ...
-----BEGIN PGP SIGNATURE-----
iQJQBAABCgA7FiEEctl9+nxzUSUqdELdf5rJavIecIUFAmSG5+AdHGFsZXhhbmRy
ZS50b3JndWVAZm9zcy5zdC5jb20ACgkQf5rJavIecIUXEA/4mb17fH6BUDc1wGHb
kl7XJh8s9A98Wbjlei+fgZ6VfDRU1KuEkna/TJ+8QwBadb450RSPxCozWyaT94kq
EeVHw2pyQELBA7T4Cu/3OzyD2dQj/hELbWKlUT5UedMibguxYb+IyxMqOrw29Ghb
t5G1cfJknkbXQDKrEVDynUHoRcDIb3vLXhvL3Z8ExSDBaaVdhrpXyJow4fRBUgtY
gqEnVJHOVHsu5k+Ah2/2SaMUpxfQIUduxFMsk7pAFiZU+nRQI03Cn6EKADCIgmS0
1LZVhjfO15Tm5X2bDN+gHqC+3ASZGZqe4KkUF5RfIN+2K1Jo8CMCoezHga0y03Lb
EN6PEoHhriqNs/2azFLTQbua0RzkdJxXNNWAG5I+I0qim6hicTV9YCkkxIQlhNxu
K67BdvBEJrDNBYlkk4DDaiGRuPFSoitwYMnZqCrvLGtxtTbjrMjppCCvdJPrCGBr
aY/1hLePnnxdBvCFKODKkiAT48gPjZoEhLrbegIY2XMqseciX4o9JZbXmnMVdpqD
2l1M2xsyVe5Jxv8JRfnr6GfUj0FVIgxB8tUII7OpXxTGZN9MaOt/92DKTbvLdvma
MwIOIMKB5QYFytCNwjFMI2LJopfiFJNUKk2Yd+WNWGaEG1LmdhTSIIROQBMDM5Zg
xTR+DvbdtbgyTSSsuBDGw1UWnA==
=WkNC
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=fxHg
-----END PGP SIGNATURE-----
Merge tag 'stm32-mp25-for-v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/newsoc
STM32 STM32MP25 for v6.5, round 1
Highlights:
----------
STM32MP25 family is composed of 4 SoCs defined as following:
-STM32MP251: common part composed of 1*Cortex-A35,
common peripherals like SDMMC, UART, SPI, I2C, PCIe, USB3,
parallel and DSI display, 1*ETH ...
-STM32MP253: STM32MP251 + 1*Cortex-A35 (dual CPU), a second ETH,
CAN-FD and LVDS display.
-STM32MP255: STM32MP253 + GPU/AI and video encode/decode.
-STM32MP257: STM32MP255 + ETH TSN switch (2+1 ports).
A second diversity layer exists for security features/A35 frequency:
-STM32MP25xY, "Y" gives information:
-Y = A means A35@1.2GHz + no cryp IP and no secure boot.
-Y = C means A35@1.2GHz + cryp IP and secure boot.
-Y = D means A35@1.5GHz + no cryp IP and no secure boot.
-Y = F means A35@1.5GHz + cryp IP and secure boot.
This PR adds the STM32MP257F EV1 board support. This board embeds a
STM32MP257FAI SoC, with 4GB of DDR4, TSN switch (2+1 ports),
2*USB typeA, 1*USB2 typeC, SNOR OctoSPI, mini PCIe, STPMIC2 for power distribution ...
* tag 'stm32-mp25-for-v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (44 commits)
MAINTAINERS: add entry for ARM/STM32 ARCHITECTURE
arm64: defconfig: enable ARCH_STM32 and STM32 serial driver
arm64: dts: st: add stm32mp257f-ev1 board support
dt-bindings: stm32: document stm32mp257f-ev1 board
arm64: dts: st: introduce stm32mp25 pinctrl files
arm64: dts: st: introduce stm32mp25 SoCs family
arm64: introduce STM32 family on Armv8 architecture
dt-bindings: stm32: add st,stm32mp25-syscfg compatible for syscon
pinctrl: stm32: add stm32mp257 pinctrl support
dt-bindings: pinctrl: stm32: support for stm32mp257 and additional packages
ARM: dts: stm32: fix i2s endpoint format property for stm32mp15xx-dkx
ARM: dts: stm32: Fix audio routing on STM32MP15xx DHCOM PDK2
ARM: dts: stm32: add required supplies of ov5640 in stm32mp157c-ev1
ARM: dts: stm32: Update to generic ADC channel binding on DHSOM systems
ARM: dts: stm32: adopt generic iio bindings for adc channels on dhcor-testbench
ARM: dts: stm32: adopt generic iio bindings for adc channels on dhcor-drc
ARM: dts: stm32: adopt generic iio bindings for adc channels on emstamp-argon
ARM: dts: stm32: adopt generic iio bindings for adc channels on stm32mp157c-ed1
ARM: dts: stm32: enable adc on stm32mp15xx-dkx boards
ARM: dts: stm32: add vrefint support to adc2 on stm32mp15
...
Link: https://lore.kernel.org/r/080fc303-45c1-6cc0-4c5e-694e730896a6@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable the clock controllers required for a good visual experience
on Qualcomm SM6115 platform boards.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
[vzapolskiy: minimal changes to a commit message]
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230601075650.1437184-6-vladimir.zapolskiy@linaro.org
Build Qualcomm QCM2290 interconnect driver as a kernel module by default.
QUPv3 GENI IP uses the interconnects and provides UARTs, but since the
dependency is not yet displayed in the platform qcm2290.dtsi file, it
could be assumed that the interconnect IP is preconfigured, thus building
the driver as a module and placing it in an initramfs should be sufficient
for booting up to rootfs stage.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230601075650.1437184-4-vladimir.zapolskiy@linaro.org
Build Qualcomm MSM Power Manager driver, which is needed for QCM2290
platform, otherwise the TLMM pin controller driver probe fails on boot.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230601075650.1437184-2-vladimir.zapolskiy@linaro.org
This adds support for the Nuvoton MA35 family SoCs which
are based on the Cortex-A35 Armv8-A 64-bit architecture.
Signed-off-by: Jacky Huang <ychuang3@nuvoton.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
There are some imx8mm-based boards that contain an SN65DSI83 MIPI
DSI to LVDS bridge chip.
Add support for it so that the LVDS output can be functional by default.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable MFD & counter related configs for Renesas MTU3a Counter as
it is populated on RZ/{G2L, LC, UL} and RZ/V2L SMARC EVKs.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230417100607.309068-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Some Mediatek PMIC devices can manage Power and Home keys (buttons).
This patch enable the driver which handle the 2 keys managed by the
Mediatek PMIC.
Tested-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20230203-evk-board-support-v8-2-7019f3fd0adf@baylibre.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Enable the power regulator support of MediaTek MT6357 PMIC. This driver
supports the control of different power rails of device through
regulator interface.
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20230203-evk-board-support-v8-1-7019f3fd0adf@baylibre.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The PLL and IPQ6018 APSS clock controller are used on several
IPQ platforms to clock the CPU. Hence it should be enabled and built-in.
Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230406061314.10916-6-quic_devipriy@quicinc.com
Enable Microchip SparX-5 (ARCH_SPARX5) with its MMC controller and
Realtek (ARCH_REALTEK) so their DTS will get built with defconfig and
maybe platforms could be booted from it.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230517143011.549319-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable the FSA4480 driver as module for Qualcomm HDK8350 and HDK8450
platforms to permit USB-C Altmode support.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230503-topic-sm8450-graphics-dp-next-v3-5-6c43d293995f@linaro.org
The imx8m Mini and imx8m Nano both use the same CSIS driver for
interfacing with sensors and cameras. The Mini routes the CSIS
output to the imx7-CSI driver, and the Nano routes the CSIS
through the imx8-isi driver like the one used on the imx8mp.
Enable the drivers necessary to facilitate capture on both of
these two platforms.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This module is used by the Qualcomm sa8775p platform for passing the
reboot reason to the bootloader. Enable building it in the arm64
defconfig as a module.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable ADC driver to be built as a module which will
add support for ADC in TI K3 specific SoCs.
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable TSCADC driver to be built as a module which will
add support for TI's TSC/ADC MFDevice.
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable TI's SA2UL driver to support security acceleration on TI K3 SoCs.
Signed-off-by: Kamlesh Gurudasani <kamlesh@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This enables a range of TLMM pinctrl drivers, needed to boot related
platforms. Multimedia clock drivers for MSM8994 and MSM8998 are enabled
and the MSM8996 is flagged as a module instead of builtin.
The PMIC_GLINK drivers are enabled, providing USB Type-C and battery
support on various platforms, and eUSB2 drivers found on SM8550 are
enabled.
Base drivers for IPQ5332 and IPQ9574 are enabled.
-----BEGIN PGP SIGNATURE-----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=9aIE
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=slvv
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-defconfig-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/defconfig
Qualcomm ARM64 defconfig updates for v6.4
This enables a range of TLMM pinctrl drivers, needed to boot related
platforms. Multimedia clock drivers for MSM8994 and MSM8998 are enabled
and the MSM8996 is flagged as a module instead of builtin.
The PMIC_GLINK drivers are enabled, providing USB Type-C and battery
support on various platforms, and eUSB2 drivers found on SM8550 are
enabled.
Base drivers for IPQ5332 and IPQ9574 are enabled.
* tag 'qcom-arm64-defconfig-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: Enable IPQ9574 SoC base configs
arm64: defconfig: remove duplicate TYPEC_UCSI & QCOM_PMIC_GLINK
arm64: defconfig: add PMIC GLINK modules
arm64: defconfig: enable Qualcomm pin controller drivers
arm64: defconfig: Enable qcom msm899{4,8} clk drivers
arm64: defconfig: Switch msm8996 clk drivers to module
arm64: defconfig: Enable QCOM eUSB2 SNPS PHY and repeater
arm64: defconfig: Enable IPQ5332 SoC base configs
Link: https://lore.kernel.org/r/20230410155955.5329-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Both configs were already applied by 2 separate changes,
fix this to avoid:
arch/arm64/configs/defconfig:989:warning: override: reassigning to symbol TYPEC_UCSI
arch/arm64/configs/defconfig:1232:warning: override: reassigning to symbol QCOM_PMIC_GLINK
Fixes: 4ffd0b0019 ("arm64: defconfig: add PMIC GLINK modules")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230324-topic-sm8450-upstream-defconfig-fixup-v1-1-2d75cc9b3c3d@linaro.org
- Enable support for the Dialog Semiconductor DA7213 Codec, and the
Renesas RZ/V2M xHCI and USB3.1 DRD controllers in the arm64
defconfig,
- Disable support for the obsolete R-Car H3 ES1.* (R8A77950) SoC in
the arm64 defconfig,
- Refresh shmobile_defconfig for v6.3-rc1,
- Enable additional support for RZ/N1 platforms in multi_v7_defconfig.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZCFJcgAKCRCKwlD9ZEnx
cOjEAP4/lrD9r6ZSsknhf3WgVEuHiSWfLQzMlEUfCBCTPV+LYAD/WvO8Xh/jFPUm
398UvhUK3J8Gn9ZCN2MiXSKmvkI2ZAw=
=CsJt
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=uj39
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-defconfig-for-v6.4-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/defconfig
Renesas ARM defconfig updates for v6.4
- Enable support for the Dialog Semiconductor DA7213 Codec, and the
Renesas RZ/V2M xHCI and USB3.1 DRD controllers in the arm64
defconfig,
- Disable support for the obsolete R-Car H3 ES1.* (R8A77950) SoC in
the arm64 defconfig,
- Refresh shmobile_defconfig for v6.3-rc1,
- Enable additional support for RZ/N1 platforms in multi_v7_defconfig.
* tag 'renesas-arm-defconfig-for-v6.4-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: defconfig: Enable RZ/V2M xHCI and USB3.1 DRD controller support
ARM: multi_v7_defconfig: Enable additional support for RZ/N1 platforms
ARM: shmobile: defconfig: Refresh for v6.3-rc1
arm64: defconfig: Disable R-Car H3 ES1.*
arm64: defconfig: Enable DA7213 Codec
Link: https://lore.kernel.org/r/cover.1679907057.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
TI's K3 platform uses McASP as the digital audio interface on the SoCs.
AM62-SK, AM62-LP-SK and AM62A-SK also use the TLV320AIC3106 codec with a
3.5mm jack for analog audio input and output.
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
Link: https://lore.kernel.org/r/20230313-mcasp_upstream-v10-3-94332149657a@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Enable drivers used on BeaglePlay[1]:
* MDIO_GPIO driver to workaround erratum i2329, DP83TD510 SPE phy
(enabled in-kernel to ease usage)
* TPS65219 PMIC, regulator as built-in for sd boot and power button
as modules. (note: this is also used by am62x-lp-sk as well)
* BQ32K battery backedup RTC and the K3 RTC drivers as modules
* OMAP2 SPI driver as module for accessing mikrobus
bloat-o-meter reports after this change (v6.3-rc1, clang 17.0.0):
add/remove: 63/2 grow/shrink: 3/0 up/down: 17660/-16 (17644)
[...]
Total: Before=27747186, After=27764830, chg +0.06%
[1] https://beagleplay.org
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/r/20230316152143.2438928-4-nm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Modern versions of FVP_Base_RevC-2xAEMvA contain a Virtio RNG device,
use of which can dramatically speed up the time taken for Linux to
initialize its CRNG, from 10s of seconds in some cases, to instant. This
improves the debug cycle significantly.
However, there are 2 barriers to getting people to use it. The first is
that the defconfig doesn't have the required driver. The second is that
the device is disabled in the device tree (for back-compat since older
versions of the FVP don't have the device). Here we solve the first
issue.
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable CAN PHY transceiver driver to be built as a module which will
add support for generic CAN transceivers used by TI K3 specific SoCs.
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable the PMIC GLINK core, altmode, battery and UCSI
aux drivers as module to enable USB Type-C management
over the PMIC GLINK protocol on modern Qcom platforms.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230130-topic-sm8450-upstream-pmic-glink-v5-12-552f3b721f9e@linaro.org
Enable pin controller drivers for several Qualcomm SoCs, as they are
necessary for basic system functionality:
- main Top Level Mode Multiplexer as built-in for QDU1000, SDM660,
SDM670, SM6125, SM6350 and SM6375.
- Low Power Audio (LPASS) TLMM as module for SC7280, SC8280XP, SM8450
and SM8550.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230309155733.662043-1-krzysztof.kozlowski@linaro.org
Enable the rest of qcom clk drivers on arm64, enabling as module,
because there is a support for probe defer on the power-domains.
Signed-off-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230217184239.21450-3-pvorel@suse.cz
Switch to module, because there is a support for probe defer on the
power-domains. This should be working since 2b28a1a84a ("driver core:
Extend deferred probe timeout on driver registration")
Suggested-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230217184239.21450-2-pvorel@suse.cz
In order to have USB 2.0 working on Qualcomm SM8550, both the eUSB2 PHY
and the eUSB2 repeater need to be built as modules.
So select them accordingly.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230320151707.1842171-1-abel.vesa@linaro.org
After disabling platform support there's still some more pruning we can
do to the virtconfig size, there are a number of drivers and subsystems
which are not likely to be useful on mach-virt and so can be disabled in
order to further improve build times. Let's do so, noting that having PCI
device assignment means that PCI devices might potentially appear.
This is just an initial manual passthrough, there will be further savings
available especially if we take a much more focused approach.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230221-arm64-virtconfig-slim-v1-1-604b64be7ec3@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
R-Car H3 ES1.* was only available to an internal development group and
needed a lot of quirks and workarounds. These become a maintenance
burden now, so our development group decided to remove upstream support
and disable booting for this SoC. Public users only have ES2 onwards.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230307105645.5285-6-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
A few bugfixes already came up during the merge window. Samsung, ASpeed,
Spear have minor DT changes, in case of Samsung this fixes a regression
compared to earlier versions.
Bartosz takes over as the primary maintainer for the TI DaVinci platform,
and we get a few last minute defconfig changes.
-----BEGIN PGP SIGNATURE-----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=ECLF
-----END PGP SIGNATURE-----
Merge tag 'arm-fixes-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"A few bugfixes already came up during the merge window. Samsung,
ASpeed, Spear have minor DT changes, in case of Samsung this fixes a
regression compared to earlier versions.
Bartosz takes over as the primary maintainer for the TI DaVinci
platform, and we get a few last minute defconfig changes"
* tag 'arm-fixes-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: dts: spear320-hmi: correct STMPE GPIO compatible
ARM: dts: aspeed: p10bmc: Update battery node name
arm64: defconfig: Add IOSCHED_BFQ to the default configs
arm64: defconfig: Fix unintentional disablement of PCI on i.MX
ARM: dts: exynos: correct TMU phandle in Odroid XU3 family
ARM: dts: exynos: correct TMU phandle in Odroid HC1
ARM: dts: exynos: correct TMU phandle in Odroid XU
ARM: dts: exynos: correct TMU phandle in Exynos5250
ARM: dts: exynos: correct TMU phandle in Exynos4210
ARM: dts: exynos: correct TMU phandle in Exynos4
MAINTAINERS: make me the maintainer of DaVinci platforms
ARM64 systems are often memory constrained and more often than not
use slow single-channel storage such as flash memory or MMC/SD-cards.
For any interactive systems (such as mobile phones, tablets,
chromebooks...) the BFQ I/O scheduler will be desireable.
Make sure the BFQ I/O scheduler is available on these systems.
ARM (32), Loongarch, MIPS, m68k, UM and S390 has also enabled BFQ in
their defconfigs, cf commit b495dfed70
"um: Cleanup CONFIG_IOSCHED_CFQ" where the motivation is that
it replaces the former CFQ scheduler.
Cc: linux-arm-kernel@lists.infradead.org
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Paolo Valente <paolo.valente@linaro.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230224135230.2295826-1-linus.walleij@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A recent update to support PCI endpoint mode on i.MX platforms
unintentionally disabled PCI host support for i.MX in defconfig. The
existing PCI_IMX6 was made a hidden option, selected by new options
PCI_IMX6_HOST (for the existing support) and PCI_IMX6_EP (for the
endpoint mode), but there has been no corresponding update to defconfig
so the PCI_IMX6 ends up getting disabled. Switch defconfig to
PCI_IMX6_HOST to preserve the existing functionality.
Fixes: 75c2f26da0 ("PCI: imx6: Add i.MX PCIe EP mode support")
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
Link: https://lore.kernel.org/r/20230220-imx-pci-defconfig-v1-1-2210cf08340e@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Here is the big set of USB and Thunderbolt driver changes for 6.3-rc1.
Nothing major in here, just lots of good development, including:
- Thunderbolt additions for new device support and features
- xhci driver updates and cleanups
- USB gadget media driver updates (includes media core changes that
were acked by the v4l2 maintainers)
- lots of other USB gadget driver updates for new features
- dwc3 driver updates and fixes
- minor debugfs leak fixes
- typec driver updates and additions
- dt-bindings conversions to yaml
- other small bugfixes and driver updates
All have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY/ivpQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymkdQCeOS6N613eggYrXwnbjJhxMQDtKAcAmweK6kXh
3o1IKOYqIMOx5E7zxn6W
=7ajf
-----END PGP SIGNATURE-----
Merge tag 'usb-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt driver updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver changes for 6.3-rc1.
Nothing major in here, just lots of good development, including:
- Thunderbolt additions for new device support and features
- xhci driver updates and cleanups
- USB gadget media driver updates (includes media core changes that
were acked by the v4l2 maintainers)
- lots of other USB gadget driver updates for new features
- dwc3 driver updates and fixes
- minor debugfs leak fixes
- typec driver updates and additions
- dt-bindings conversions to yaml
- other small bugfixes and driver updates
All have been in linux-next for a while with no reported issues"
* tag 'usb-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (237 commits)
usb: dwc3: xilinx: Remove unused of_gpio,h
usb: typec: pd: Add higher capability sysfs for sink PDO
usb: typec: pd: Remove usb_suspend_supported sysfs from sink PDO
usb: dwc3: pci: add support for the Intel Meteor Lake-M
usb: gadget: u_ether: Don't warn in gether_setup_name_default()
usb: gadget: u_ether: Convert prints to device prints
usb: gadget: u_serial: Add null pointer check in gserial_resume
usb: gadget: uvc: fix missing mutex_unlock() if kstrtou8() fails
xhci: host: potential NULL dereference in xhci_generic_plat_probe()
dt-bindings: usb: amlogic,meson-g12a-usb-ctrl: make G12A usb3-phy0 optional
usb: host: fsl-mph-dr-of: reuse device_set_of_node_from_dev
of: device: Do not ignore error code in of_device_uevent_modalias
of: device: Ignore modalias of reused nodes
usb: gadget: configfs: Fix set but not used variable warning
usb: gadget: uvc: Use custom strings if available
usb: gadget: uvc: Allow linking function to string descs
usb: gadget: uvc: Pick up custom string descriptor IDs
usb: gadget: uvc: Allow linking XUs to string descriptors
usb: gadget: configfs: Attach arbitrary strings to cdev
usb: gadget: configfs: Support arbitrary string descriptors
...
This enables the drivers needed to support USB Type-C based external
display on the SC8280XP laptops. It also enables a couple of core
drivers for the Qualcomm SA8775P platform.
-----BEGIN PGP SIGNATURE-----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=vi5s
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmPs5sEACgkQmmx57+YA
GNmpSA/8DdFQGkhnNgHklMBPrdS+cBJJEFZMPNuVSUG5RGZ944bjDtXzO9TmpL9X
PNAbM/hw2SwpuQG5+/bWOig/oghNJuvFe2fcgD3N3NbsP1yjSV9jECbkwav6qZLt
lHVsqop/u3zEKrySBJVpT69DlKMVNc8V4UNNO3Ob5y//h+a1jhTGYXysIaKP1t5S
NYp/2EPexVc1HO6/ONbqr+v7qmQXVTy0/IbppRAmA3nyqFHkj76Vxn3LKPRClOOx
Z1drLX2BVaLSCtveJAG+iUOMdk2alw2NV6mHg7pI33bqzYKMQwt9oPX6GS6WJHMx
axcb3ZiCbBwV0Q3JUl0gYJvv5SvODQLERfLP9H2h5NjBbiI8ywHAzBH8BBuNei4e
DAaGUG1/IJVYZR67/5eKK7bxli10sLWhZdedCeczc4I6+4gEu//lZxPMCxonVGDv
YCGVF2ylg4gr8qKw1XcHjZ86BmuEmaoccvaJH0bWpoeHxAgO1AwHAQX1yC4dCuTJ
86q0O+SCZR4rt92TtK7br3XM2O9EBO8/X6ey/pQ4zWLFAsfZBRoANxwEAn75JISt
5OPcqLtcL49tYZDaEVxpYT+RR/ZKIMNzmxVztu3OtXU7u9K3pd0HSV1A7XOaBTRp
i44MspXQvPJQhO154HteAPEWgF198FAU1YjXUGpLMelJNOgQSYY=
=ppMB
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-defconfig-for-6.3-3' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/defconfig
Few more Qualcomm ARM64 defconfig updates for v6.3
This enables the drivers needed to support USB Type-C based external
display on the SC8280XP laptops. It also enables a couple of core
drivers for the Qualcomm SA8775P platform.
* tag 'qcom-arm64-defconfig-for-6.3-3' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: enable drivers required by the Qualcomm SA8775P platform
arm64: defconfig: Enable DisplayPort on SC8280XP laptops
Link: https://lore.kernel.org/r/20230215051757.1166709-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable the pinctrl, GCC clock and interconnect drivers in order to allow
booting SA8775P boards. The drivers need to be built-in for QUPv3 and
subsequently UART console to work.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Eric Chanudet <echanude@redhat.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230209103531.469809-1-brgl@bgdev.pl
The QCOM_PMIC_GLINK implements the parts of a TCPM necessary for
negotiating DP altmode and the TYPEC_MUX_GPIO_SBU driver is used for
controlling connection and orientation switching of the SBU lanes in the
USB-C connector Enable these to enable USB Type-C DisplayPort on
SC8280XP laptops.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230213215619.1362566-5-quic_bjorande@quicinc.com
Provide a slimline configuration intended to be booted on virtual
machines, with the goal of providing a light configuration which will
boot on and enable features available in mach-virt. This is defined in
terms of the standard defconfig, with an additional virt.config fragment
which disables options unneeded in a virtual configuration.
As a first step we just disable all the ARCH_ configuration options,
disabling the build of all the SoC specific drivers. This results in a
kernel that builds about 25% faster in my testing, if this approach
works for people we can add further options.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230203-arm64-defconfigs-v1-3-cd0694a05f13@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Here are two more defconfig updates for 6.3, enabling the SM8450 Display
clock controller driver, as well as the SDAM driver, a driver exposing
SRAM on newer Qualcomm PMICs to other devices.
-----BEGIN PGP SIGNATURE-----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=b8rp
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=QLZQ
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-defconfig-for-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/defconfig
More ARM64 defconfig updates for v6.3
Here are two more defconfig updates for 6.3, enabling the SM8450 Display
clock controller driver, as well as the SDAM driver, a driver exposing
SRAM on newer Qualcomm PMICs to other devices.
* tag 'qcom-arm64-defconfig-for-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: enable Qualcomm SDAM nvmem driver
arm64: defconfig: enable SM8450 DISPCC clock driver
arm64: defconfig: enable the clock driver for Qualcomm SA8775P platforms
arm64: defconfig: enable Visionox VTDR6130 DSI Panel driver
arm64: defconfig: enable SM8550 DISPCC clock driver
arm64: defconfig: enable Qualcomm PCIe modem drivers
arm64: defconfig: Enable SC8280XP Display Clock Controller
arm64: defconfig: Enable GCC, TCSRCC, pinctrl and interconnect for SM8550
arm64: defconfig: enable crypto userspace API
arm64: defconfig: build SDM_LPASSCC_845 as a module
arm64: defconfig: enable camera on Thundercomm RB5 platform
arm64: defconfig: build PINCTRL_SM8250_LPASS_LPI as module
arm64: defconfig: Enable Qualcomm EUD
Link: https://lore.kernel.org/r/20230210181516.2021902-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Some Kconfig options has moved around after a 'make savedefconfig' run,
so move them to their new location to make it easier to see what other
options got removed.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The SDAM nvmem driver can be used to access the Shared Direct Access
Memory Module registers in some Qualcomm PMICs.
These registers can specifically be used to store a time offset on
platforms where the PMIC RTC time registers are read-only in order to
allow the RTC time to be updated.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230202155448.6715-19-johan+linaro@kernel.org
Enable the TYPEC UCSI support and the Cypress UCSI driver that is used
on the NVIDIA Jetson platforms.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20230131175748.256423-7-jonathanh@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Enable support for restricted DMA pools which provide a level of DMA
memory protection on systems with limited hardware protection
capabilities, such as those lacking an IOMMU.
For instance, mt8192-asurada-spherion makes use of this to provide a
restricted DMA region for WiFi since its MT7921E WiFi card is connected
through PCIe, and the MT8192 SoC doesn't have an IOMMU context for the
PCIe controller.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20230130200820.82084-2-nfraprado@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Enable missing configs in the arm64 defconfig to get all devices probing
on mt8192-asurada based machines.
The devices enabled are: MediaTek Bluetooth USB controller, MediaTek
PCIe Gen3 MAC controller, MT7921E wireless adapter, Elan I2C Trackpad,
MediaTek SPI NOR flash controller, Mediatek SPMI Controller, ChromeOS EC
regulators, MT6315 PMIC, MediaTek Video Codec, MT8192 sound cards,
ChromeOS EC rpmsg communication, all MT8192 clocks.
REGULATOR_CROS_EC is enabled as builtin since it powers the MMC
controller for the SD card, making it required for booting on some
setups.
The MT8192 clocks are enabled as builtin for now since their Kconfigs
are bool, and will be changed to modules after those Kconfigs are
reworked.
Restricted DMA pool support is also required to get working WiFi, but
it is enabled in a separate commit since it alters behavior of other
platforms and devices.
By enabling the support for all of this platform's devices on the
defconfig we make it effortless to test the relevant hardware both by
developers as well as CI systems like KernelCI.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20230130200820.82084-1-nfraprado@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Enable the USB onboard HUB driver, used on Amlogic boards.
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230118044418.875-10-linux.amoon@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Enable the GCC clock driver on SA8775P platforms. It needs to be built-in
for console to work.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230109174511.1740856-4-brgl@bgdev.pl
Enable the MHI PCI controller driver and the MHI NET and WWAN drivers
for Qualcomm based PCIe modems such as the ones found on the SC8280XP
Compute Reference Design (CRD) and Lenovo Thinkpad X13s.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230115174450.11041-1-johan+linaro@kernel.org
The Display Clock Controller provides clocks and power-domains for
the display subsystem, enable this to enable display on the SC8280XP.
Now that power-domains can probe defer past late_initcall() this should
be possible to leave as module.
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230111035906.2975494-5-quic_bjorande@quicinc.com
Add the SM8550 GCC, TCSRCC, interconnect and pinctrl drivers as built-in.
All of these are necessary for the Qualcomm SM8550 platform to boot
to shell.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230111080254.1181325-1-abel.vesa@linaro.org
Enable CONFIG_CRYPTO_USER so that libkcapi can be used. This was tested
using kcapi-rng on a Qualcomm SA8540p automotive development board.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221214174607.2948497-1-bmasney@redhat.com
i.MX ICC and DEVFREQ driver is required for i.MX8MP normal boot,
because the BLK CTRL power domain driver requires QoS configuraton.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Now that the EUD (Embedded USB Debugger) block is supported on
several Qualcomm SoCs upstream, enable the same as a module in
the arm64 defconfig as a module.
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221231124852.3283597-1-bhupesh.sharma@linaro.org
Enable the Qualcomm SM6115 / SM4250 TLMM pinctrl and GCC clock drivers.
They need to be builtin to ensure that the UART is allowed to probe
before user space needs a console.
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221128200834.1776868-1-bhupesh.sharma@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This enables more Qualcomm TLMM pinctrl drivers, and the Qualcomm crypto
drivers.
It makes the SC7180 and SM8450 interconnect drivers builtin, in order to
ensure that a console will be registered before init needs it.
-----BEGIN PGP SIGNATURE-----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=mRnV
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=wQQD
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-defconfig-for-6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig
Qualcomm ARM64 defconfig updates for 6.2
This enables more Qualcomm TLMM pinctrl drivers, and the Qualcomm crypto
drivers.
It makes the SC7180 and SM8450 interconnect drivers builtin, in order to
ensure that a console will be registered before init needs it.
* tag 'qcom-arm64-defconfig-for-6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: build-in Qualcomm SC7180 and SM8450 interconnects
arm64: defconfig: Enable Qualcomm QCE crypto
arm64: defconfig: enable rest of Qualcomm ARMv8 SoCs pinctrl drivers
Enable Renesas "Ethernet Switch", Ethernet SERDES and Marvell 10G PHY
drivers to be used by NFS root on the Renesas Spider board.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20221118120953.1186392-4-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Enable HTE core and tegra HTE provider by default as built in
module.
Signed-off-by: Dipen Patel <dipenp@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable missing configs in the arm64 defconfig to get all devices probing
on the mt8183-kukui-jacuzzi-juniper machine.
The devices enabled are: ATH10K SDIO wireless adapter, Elan touchscreen,
cr50 TPM, MediaTek SPI controller, JPEG video decoder, ANX7625 DSI/DPI
to DP bridge (used for the internal display), MT8183 sound cards, SCP
co-processor, MediaTek Global Command Engine (controlled by CMDQ
driver), MediaTek Smart Voltage Scaling (SVS) engine, CCI frequency
and voltage scaling, AUXADC thermal sensors.
All symbols are enabled as modules with the exception of SPI, which is
enabled as builtin since on some platforms like mt8195-cherry, the
ChromeOS Embedded Controller is connected through SPI and it is
responsible for the regulators powering the MMC controller used for the
SD card, and thus SPI support is required for booting.
By enabling the support for all of this machine's devices on the
defconfig we make it effortless to test the relevant hardware both by
developers as well as CI systems like KernelCI.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221109195012.1231059-1-nfraprado@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
MBa8MPxL (with TQMa8MPQL attached) needs this driver for PCIe reference
clock generation. Add it do default config.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable Tegra186 timer support which is needed for Tegra186, Tegra194 and
Tegra234 devices.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
On Qualcomm SC7180 and SM8450 SocS, the typical debug console serial
port is part of GENI Serial Engine QUP Wrapper Controller which uses
interconnects. This means that without interconnect drivers, the serial
might not probe. Without serial console, the root might not be mounted
by initramfs:
+ REASON=No init found. Try passing init= bootarg. PS1=(initramfs
...
(initramfs) run-init -c /dev/console -n /root /sbin/init
run-init: opening console: No such file or directory
This means that interconnect drivers on these Qualcomm SoCs cannot be
modules and must be built-in to mount rootfs.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221021032702.1340963-1-krzysztof.kozlowski@linaro.org
Now that the QCE crypto block is supported on several
Qualcomm SoCs upstream, enable the same as a module in the
arm64 defconfig.
Cc: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220921045602.1462007-5-bhupesh.sharma@linaro.org
Enable generic PCM loopback driver.
On NVIDIA Jetson platforms, customers use this to loop data between
container based applications and host OS.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable RT5640 and TAS2552 audio codec drivers.
NVIDIA Jetson platforms have 40-pin GPIO expanders where custom
audio cards can be connected. Support for above codecs is typically
required. Also NVIDIA Jetson AGX Orin platform has RT5640 as onboard
codec. To support these enable driver build for these codecs.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable SNVS LPGPR support. This may e.g. be used on the i.MX 8M Mini and
Plus to store a form of boot counter.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Here is the large set of char/misc and other small driver subsystem
changes for 6.1-rc1. Loads of different things in here:
- IIO driver updates, additions, and changes. Probably the largest
part of the diffstat
- habanalabs driver update with support for new hardware and features,
the second largest part of the diff.
- fpga subsystem driver updates and additions
- mhi subsystem updates
- Coresight driver updates
- gnss subsystem updates
- extcon driver updates
- icc subsystem updates
- fsi subsystem updates
- nvmem subsystem and driver updates
- misc driver updates
- speakup driver additions for new features
- lots of tiny driver updates and cleanups
All of these have been in the linux-next tree for a while with no
reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY0GQmA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylyVQCeNJjZ3hy+Wz8WkPSY+NkehuIhyCIAnjXMOJP8
5G/JQ+rpcclr7VOXlS66
=zVkU
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver updates from Greg KH:
"Here is the large set of char/misc and other small driver subsystem
changes for 6.1-rc1. Loads of different things in here:
- IIO driver updates, additions, and changes. Probably the largest
part of the diffstat
- habanalabs driver update with support for new hardware and
features, the second largest part of the diff.
- fpga subsystem driver updates and additions
- mhi subsystem updates
- Coresight driver updates
- gnss subsystem updates
- extcon driver updates
- icc subsystem updates
- fsi subsystem updates
- nvmem subsystem and driver updates
- misc driver updates
- speakup driver additions for new features
- lots of tiny driver updates and cleanups
All of these have been in the linux-next tree for a while with no
reported issues"
* tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (411 commits)
w1: Split memcpy() of struct cn_msg flexible array
spmi: pmic-arb: increase SPMI transaction timeout delay
spmi: pmic-arb: block access for invalid PMIC arbiter v5 SPMI writes
spmi: pmic-arb: correct duplicate APID to PPID mapping logic
spmi: pmic-arb: add support to dispatch interrupt based on IRQ status
spmi: pmic-arb: check apid against limits before calling irq handler
spmi: pmic-arb: do not ack and clear peripheral interrupts in cleanup_irq
spmi: pmic-arb: handle spurious interrupt
spmi: pmic-arb: add a print in cleanup_irq
drivers: spmi: Directly use ida_alloc()/free()
MAINTAINERS: add TI ECAP driver info
counter: ti-ecap-capture: capture driver support for ECAP
Documentation: ABI: sysfs-bus-counter: add frequency & num_overflows items
dt-bindings: counter: add ti,am62-ecap-capture.yaml
counter: Introduce the COUNTER_COMP_ARRAY component type
counter: Consolidate Counter extension sysfs attribute creation
counter: Introduce the Count capture component
counter: 104-quad-8: Add Signal polarity component
counter: Introduce the Signal polarity component
counter: interrupt-cnt: Implement watch_validate callback
...
- arm64 perf: DDR PMU driver for Alibaba's T-Head Yitian 710 SoC, SVE
vector granule register added to the user regs together with SVE perf
extensions documentation.
- SVE updates: add HWCAP for SVE EBF16, update the SVE ABI documentation
to match the actual kernel behaviour (zeroing the registers on syscall
rather than "zeroed or preserved" previously).
- More conversions to automatic system registers generation.
- vDSO: use self-synchronising virtual counter access in gettimeofday()
if the architecture supports it.
- arm64 stacktrace cleanups and improvements.
- arm64 atomics improvements: always inline assembly, remove LL/SC
trampolines.
- Improve the reporting of EL1 exceptions: rework BTI and FPAC exception
handling, better EL1 undefs reporting.
- Cortex-A510 erratum 2658417: remove BF16 support due to incorrect
result.
- arm64 defconfig updates: build CoreSight as a module, enable options
necessary for docker, memory hotplug/hotremove, enable all PMUs
provided by Arm.
- arm64 ptrace() support for TPIDR2_EL0 (register provided with the SME
extensions).
- arm64 ftraces updates/fixes: fix module PLTs with mcount, remove
unused function.
- kselftest updates for arm64: simple HWCAP validation, FP stress test
improvements, validation of ZA regs in signal handlers, include larger
SVE and SME vector lengths in signal tests, various cleanups.
- arm64 alternatives (code patching) improvements to robustness and
consistency: replace cpucap static branches with equivalent
alternatives, associate callback alternatives with a cpucap.
- Miscellaneous updates: optimise kprobe performance of patching
single-step slots, simplify uaccess_mask_ptr(), move MTE registers
initialisation to C, support huge vmalloc() mappings, run softirqs on
the per-CPU IRQ stack, compat (arm32) misalignment fixups for
multiword accesses.
-----BEGIN PGP SIGNATURE-----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=jl3Z
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
- arm64 perf: DDR PMU driver for Alibaba's T-Head Yitian 710 SoC, SVE
vector granule register added to the user regs together with SVE perf
extensions documentation.
- SVE updates: add HWCAP for SVE EBF16, update the SVE ABI
documentation to match the actual kernel behaviour (zeroing the
registers on syscall rather than "zeroed or preserved" previously).
- More conversions to automatic system registers generation.
- vDSO: use self-synchronising virtual counter access in gettimeofday()
if the architecture supports it.
- arm64 stacktrace cleanups and improvements.
- arm64 atomics improvements: always inline assembly, remove LL/SC
trampolines.
- Improve the reporting of EL1 exceptions: rework BTI and FPAC
exception handling, better EL1 undefs reporting.
- Cortex-A510 erratum 2658417: remove BF16 support due to incorrect
result.
- arm64 defconfig updates: build CoreSight as a module, enable options
necessary for docker, memory hotplug/hotremove, enable all PMUs
provided by Arm.
- arm64 ptrace() support for TPIDR2_EL0 (register provided with the SME
extensions).
- arm64 ftraces updates/fixes: fix module PLTs with mcount, remove
unused function.
- kselftest updates for arm64: simple HWCAP validation, FP stress test
improvements, validation of ZA regs in signal handlers, include
larger SVE and SME vector lengths in signal tests, various cleanups.
- arm64 alternatives (code patching) improvements to robustness and
consistency: replace cpucap static branches with equivalent
alternatives, associate callback alternatives with a cpucap.
- Miscellaneous updates: optimise kprobe performance of patching
single-step slots, simplify uaccess_mask_ptr(), move MTE registers
initialisation to C, support huge vmalloc() mappings, run softirqs on
the per-CPU IRQ stack, compat (arm32) misalignment fixups for
multiword accesses.
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (126 commits)
arm64: alternatives: Use vdso/bits.h instead of linux/bits.h
arm64/kprobe: Optimize the performance of patching single-step slot
arm64: defconfig: Add Coresight as module
kselftest/arm64: Handle EINTR while reading data from children
kselftest/arm64: Flag fp-stress as exiting when we begin finishing up
kselftest/arm64: Don't repeat termination handler for fp-stress
ARM64: reloc_test: add __init/__exit annotations to module init/exit funcs
arm64/mm: fold check for KFENCE into can_set_direct_map()
arm64: ftrace: fix module PLTs with mcount
arm64: module: Remove unused plt_entry_is_initialized()
arm64: module: Make plt_equals_entry() static
arm64: fix the build with binutils 2.27
kselftest/arm64: Don't enable v8.5 for MTE selftest builds
arm64: uaccess: simplify uaccess_mask_ptr()
arm64: asm/perf_regs.h: Avoid C++-style comment in UAPI header
kselftest/arm64: Fix typo in hwcap check
arm64: mte: move register initialization to C
arm64: mm: handle ARM64_KERNEL_USES_PMD_MAPS in vmemmap_populate()
arm64: dma: Drop cache invalidation from arch_dma_prep_coherent()
arm64/sve: Add Perf extensions documentation
...
Add Coresight to defconfig so that build errors are caught.
CONFIG_CORESIGHT_SOURCE_ETM4X is excluded because it depends on
CONFIG_PID_IN_CONTEXTIDR which has a performance cost.
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20220922142400.478815-2-james.clark@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The selection of PMUs enabled in the defconfig is currently a bit random
and does not include a number of those provided by Arm and present in a
fairly wide range of SoCs. Improve coverage and defconfig utility by
enabling all the Arm provided PMUs by default.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: James Clark <james.clark@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20220919162753.3079869-1-broonie@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enables the new MGBE driver, as well as the existing SPI and QSPI
drivers on 64-bit ARM. The GPC DMA driver is now also built into the
kernel by default to avoid needless probe deferrals that would slow
down the boot process significantly.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAmMkTFkTHHRyZWRpbmdA
bnZpZGlhLmNvbQAKCRDdI6zXfz6zoeqcEACFjZGVkgAriqQLN+n/+ZUh/haV8pst
9TB6ZJ8Gb1LPyfiM9bL/rM5aUxILXmu4xaoa4wyD/mFq3XqjAUeRGmQ9I82FvFSv
sSI/yrz0+W1oEsdFOUNzRnoToapmHFpWkmPNc5aGA/J4UK47EywHhSC1rYex8+4C
VKKMIEXA+rGHRFy7+D49JK2ERD5FZbYaP872f26qyYzMaeYqKx7mkRFIzzTQ2tNc
cAje4Vkzp/G0MH3sldlo0AREH4gmiGB3/36dDgFgQIJXD5tpP1Rjtqnlu2thUp89
Xfi6FNOYwnpRCVvVlCA1pzGW8TQ0sq6VMQ3DfoVCocdFh8VEfblAlFclFJRgy9mQ
RotuleCMR0tLsLsazwBascQToSA6h6FxnF47wyiGvTV493aP8DkCrw7xof6D0gWQ
wjBFBFtgWGOiqOf0iJg7I5lJXYLahU42mXnW91TKUXkFI2CFgq5/Drd5Ja332W4r
52YC56na5c/8mXaLp+IDCB1fwybJOYE11HBe3yQqkarF61/xVjFQd5UCragSMKLY
rj51+jgRsNfZj5NU6MRcxOCbn4cseewPgBatDEsevUwnd09nXFWlrkq1RM3iPzoB
1vdfBd+GF8lC2nHrtNvM+G6w2KQDWVp4+Gyy9pvzNRvQrDILuYt08+BFmWWk2S7Q
ffp2VpW4aBNFRA==
=wtaF
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Hr4N
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-6.1-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/defconfig
arm64: tegra: Default configuration changes for v6.1-rc1
Enables the new MGBE driver, as well as the existing SPI and QSPI
drivers on 64-bit ARM. The GPC DMA driver is now also built into the
kernel by default to avoid needless probe deferrals that would slow
down the boot process significantly.
* tag 'tegra-for-6.1-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: defconfig: Make TEGRA186_GPC_DMA built-in
arm64: tegra: Enable Tegra SPI & QSPI in deconfig
arm64: defconfig: Enable Tegra MGBE driver
Link: https://lore.kernel.org/r/20220916101957.1635854-6-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable the driver SDHCI support for the Synopsys DWC MSHC
controller which can be found on Rockchip 356x SoCs.
Cc: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Link: https://lore.kernel.org/r/20220922192050.2031-1-linux.amoon@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Let's enable ACPI_HMAT, ACPI_HOTPLUG_MEMORY, MEMORY_HOTPLUG
and MEMORY_HOTREMOVE for more test coverage, also there are
useful for heterogeneous memory scene.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220629093524.34801-1-wangkefeng.wang@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The selection of PMUs enabled in the defconfig is currently a bit random
and does not include a number of those provided by Arm and present in a
fairly wide range of SoCs. Improve coverage and defconfig utility by
enabling all the Arm provided PMUs by default.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: James Clark <james.clark@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20220919162753.3079869-1-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Enable sc8180x global clock controller, tlmm, interconnect and edp phy
drivers which are required for sc8180x like Lenovo Flex 5G laptop to
boot.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220916124214.3881948-1-vkoul@kernel.org
please pull the following:
- William completes the removal of ARCH_BCM4908 by removing that Kconfig
entry from the defconfig since it is being deleted after having been
transitional through 6.0
-----BEGIN PGP SIGNATURE-----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=Uw1u
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=DF0K
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-6.1/defconfig-arm64' of https://github.com/Broadcom/stblinux into arm/defconfig
This pull request contains Broadcom ARM64 defconfig changes for 6.1,
please pull the following:
- William completes the removal of ARCH_BCM4908 by removing that Kconfig
entry from the defconfig since it is being deleted after having been
transitional through 6.0
* tag 'arm-soc/for-6.1/defconfig-arm64' of https://github.com/Broadcom/stblinux:
arm64: defconfig: remove BCM4908
Link: https://lore.kernel.org/r/20220915023044.2350782-1-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Make TEGRA186_GPC_DMA driver as built-in since the clients using the
DMA (like I2C_TEGRA etc) are built-in. This would avoid the potential
long delay probe deferral can cause.
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Devfreq cooling device framework is used in Panfrost
to throttle GPU in order to regulate its temperature.
Enable this driver for ARM64 SoC.
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220906153034.153321-2-peron.clem@gmail.com
Commit 566e373fe0 ("arm64: Kconfig.platforms: Group NXP platforms
together") introduced a new symbol ARCH_NXP and made ARCH_LAYERSCAPE
(among others) depend on it, but didn't enable it in the defconfig.
Thus, now the defconfig doesn't include support for any NXP
architectures anymore. Fix it.
Fixes: 566e373fe0 ("arm64: Kconfig.platforms: Group NXP platforms together")
Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Commit 96796c914b ("arm64: Kconfig.platforms: Re-organized Broadcom
menu") introduced a new symbol ARCH_BCM and made all of the Broadcom
SoCs Kconfig depend on it, but did not enable it in the defconfig.
Thus, now the defconfig doesn't include support for any Broadcom
architectures anymore. Fix it.
Fixes: 96796c914b ("arm64: Kconfig.platforms: Re-organized Broadcom menu")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220906033957.4377-1-f.fainelli@gmail.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable the driver for the Multi-Gigabit Ethernet (MGBE) controller which
can be found on NVIDIA Tegra234 SoCs.
Signed-off-by: Bhadram Varka <vbhadram@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
In the commit 617d32938d ("rpmsg: Move the rpmsg control device
from rpmsg_char to rpmsg_ctrl"), we split the rpmsg_char driver in two.
By default give everyone who had the old driver enabled the rpmsg_ctrl
driver too.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Refresh shmobile_defconfig for v6.0-rc1,
- Enable additional support for Renesas platforms in the arm64
defconfig.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYxHFsQAKCRCKwlD9ZEnx
cFnnAP0WWCnx50+oodGIJfcpb/QDcmXXVPa4EVrf92TvgqWrCQD+Nel3En9EYaWr
wt+GR2aZpa+E9Kfa9OovTzUWzvHiXw8=
=fwbH
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=jebc
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-defconfig-for-v6.1-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/defconfig
Renesas ARM defconfig updates for v6.1
- Refresh shmobile_defconfig for v6.0-rc1,
- Enable additional support for Renesas platforms in the arm64
defconfig.
* tag 'renesas-arm-defconfig-for-v6.1-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: defconfig: Enable additional support for Renesas platforms
ARM: shmobile: defconfig: Refresh for v6.0-rc1
Link: https://lore.kernel.org/r/cover.1662111126.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Since commit 788961462f ("ARM: psci: cpuidle: Enable PSCI CPUidle
driver") the generic ARM cpuidle driver probe no longer worked on
ARM64. It was however left enabled with the driver failing to probe
successfully. However the commit 51280acad8 ("cpuidle: cpuidle-arm:
remove arm64 support") removed the Kconfig option so that it is no
longer enabled for arm64 platforms.
Drop the disabled/unavailable ARM_CPUIDLE from the defconfig.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20220822121604.2213778-1-sudeep.holla@arm.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Move ARM- and ARM64-accelerated menus into a submenu under
the Crypto API menu (paralleling all the architectures).
Make each submenu always appear if the corresponding architecture
is supported. Get rid of the ARM_CRYPTO and ARM64_CRYPTO symbols.
The "ARM Accelerated" or "ARM64 Accelerated" entry disappears from:
General setup --->
Platform selection --->
Kernel Features --->
Boot options --->
Power management options --->
CPU Power Management --->
[*] ACPI (Advanced Configuration and Power Interface) Support --->
[*] Virtualization --->
[*] ARM Accelerated Cryptographic Algorithms --->
(or)
[*] ARM64 Accelerated Cryptographic Algorithms --->
...
-*- Cryptographic API --->
Library routines --->
Kernel hacking --->
and moves into the Cryptographic API menu, which now contains:
...
Accelerated Cryptographic Algorithms for CPU (arm) --->
(or)
Accelerated Cryptographic Algorithms for CPU (arm64) --->
[*] Hardware crypto devices --->
...
Suggested-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This adds initial support for two SoC families that have been under
review for a while. In both cases, the origonal idea was to have a
minimally functional version, but we ended up leaving out the clk drivers
that are still under review and will be merged through the corresponding
subsystem tree.
The Nuvoton NPCM8xx is a 64-bit Baseboard Management Controller and
based on the 32-bit NPCM7xx family but is now getting added to
arch/arm64 as well.
Sunplus SP7021, also known as Plus1, is a general-purpose
System-in-Package design based on the 32-bit Cortex-A7 SoC
on the main chip, plus an I/O chip and memory in the same
-----BEGIN PGP SIGNATURE-----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=7Id+
-----END PGP SIGNATURE-----
Merge tag 'arm-newsoc-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM new SoC support from Arnd Bergmann:
"This adds initial support for two SoC families that have been under
review for a while. In both cases, the origonal idea was to have a
minimally functional version, but we ended up leaving out the clk
drivers that are still under review and will be merged through the
corresponding subsystem tree.
The Nuvoton NPCM8xx is a 64-bit Baseboard Management Controller and
based on the 32-bit NPCM7xx family but is now getting added to
arch/arm64 as well.
Sunplus SP7021, also known as Plus1, is a general-purpose
System-in-Package design based on the 32-bit Cortex-A7 SoC on the main
chip, plus an I/O chip and memory in the same"
* tag 'arm-newsoc-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits)
MAINTAINERS: rectify entry for ARM/NUVOTON NPCM ARCHITECTURE
arm64: defconfig: Add Nuvoton NPCM family support
arm64: dts: nuvoton: Add initial NPCM845 EVB device tree
arm64: dts: nuvoton: Add initial NPCM8XX device tree
arm64: npcm: Add support for Nuvoton NPCM8XX BMC SoC
dt-bindings: arm: npcm: Add nuvoton,npcm845 GCR compatible string
dt-bindings: arm: npcm: Add nuvoton,npcm845 compatible string
dt-bindings: arm: npcm: Add maintainer
reset: npcm: Add NPCM8XX support
dt-bindings: reset: npcm: Add support for NPCM8XX
reset: npcm: using syscon instead of device data
ARM: dts: nuvoton: add reset syscon property
dt-bindings: reset: npcm: add GCR syscon property
dt-binding: clk: npcm845: Add binding for Nuvoton NPCM8XX Clock
dt-bindings: watchdog: npcm: Add npcm845 compatible string
dt-bindings: timer: npcm: Add npcm845 compatible string
ARM: dts: Add Sunplus SP7021-Demo-V3 board device tree
ARM: sp7021_defconfig: Add Sunplus SP7021 defconfig
ARM: sunplus: Add initial support for Sunplus SP7021 SoC
irqchip: Add Sunplus SP7021 interrupt controller driver
...
Some configs can obviously be removed when sync'ing with savedefconfig, as
follows:
- config SECCOMP was changed to def_bool y in commit 282a181b1a ("
seccomp: Move config option SECCOMP to arch/Kconfig"), so no need to
explicitly enable in the defconfig.
- config MAILBOX is already selected by some drivers enabled in the
defconfig, so no need to explicitly enable.
- config QRTR was enabled in the defconfig from commit 1bdf91fd2a ("
arm64: defconfig: Enable Qualcomm QRTR"). However until many kernel
versions later in commit 231a136fdf ("arm64: defconfig: enable ath11k
driver"), no driver depended on config QRTR - not for building anyway.
In commit 231a136fdf, config ATH11K_PCI was enabled and this selects
config QRTR, so there is no need to explicitly enable in the defconfig.
Signed-off-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1658827473-121156-1-git-send-email-john.garry@huawei.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A number of Kconfig options have moved around in the defconfig
file over time. Move them to the place that they 'savedefconfig'
puts them at now, to better see which options are now gone
for some reason.
Reported-by: John Garry <john.garry@huawei.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
CONFIG_DEBUG_INFO is now implicitly selected if one picks one of the
explicit options that could be DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT,
DEBUG_INFO_DWARF4, DEBUG_INFO_DWARF5.
This was actually not what I had in mind when I suggested making
it a 'choice' statement, but it's too late to change again now,
and the Kconfig logic is more sensible in the new form.
Change any defconfig file that had CONFIG_DEBUG_INFO enabled
but did not pick DWARF4 or DWARF5 explicitly to now pick the toolchain
default.
Fixes: f9b3cd2457 ("Kconfig.debug: make DEBUG_INFO selectable from a choice")
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This enables a few of the core drivers needed to boot the 8cx Gen 3
platform and demotes the Qualcomm USB PHY drivers to modules, as they
don't need to be builtin.
-----BEGIN PGP SIGNATURE-----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=KJ5v
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=CCqT
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-defconfig-for-5.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig
Qualcomm ARM64 defconfig more updates for v5.20
This enables a few of the core drivers needed to boot the 8cx Gen 3
platform and demotes the Qualcomm USB PHY drivers to modules, as they
don't need to be builtin.
* tag 'qcom-arm64-defconfig-for-5.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: Demote Qualcomm USB PHYs to modules
arm64: defconfig: Enable Qualcomm SC8280XP providers
Link: https://lore.kernel.org/r/20220720230140.2113129-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Qualcomm USB PHYs are not critical for reaching the ramdisk to load
modules, so they can be demoted to be built as such instead of builtin.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20220712031821.4134712-1-bjorn.andersson@linaro.org
The Qualcomm SC8280XP need the global clock controller, interconnect
provider and TLMM pinctrl in order to boot. Enable these as builtin, as
they are needed in order to provide e.g. UART.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220707161014.3178798-1-bjorn.andersson@linaro.org
This enables the drivers for the Light Pulse Generator and Bandwidth
Monitor hardware, found in a wide variety of Qualcomm PMICs and SoCs.
It enables interconnect providers for MSM8996, QCS404 and SC7180 and it
enables the USB PHYs for the QCS404 platform.
-----BEGIN PGP SIGNATURE-----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=DyUm
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=/elF
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-defconfig-for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig
Qualcomm ARM64 defconfig updates for v5.20
This enables the drivers for the Light Pulse Generator and Bandwidth
Monitor hardware, found in a wide variety of Qualcomm PMICs and SoCs.
It enables interconnect providers for MSM8996, QCS404 and SC7180 and it
enables the USB PHYs for the QCS404 platform.
* tag 'qcom-arm64-defconfig-for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: enable Qualcomm Bandwidth Monitor
arm64: defconfig: Enable qcom interconnect drivers
arm64: defconfig: Enable qcom ss & hs usb phy
arm64: defconfig: enable Qualcomm LPG leds driver
Link: https://lore.kernel.org/r/20220712031812.1275182-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
for 5.10, please pull the following:
- Nicolas enables CONFIG_DRM_V3D in order for the Raspberry Pi 4 systems
to load the proper GPU module driver
- William enables the newly introduced CONFIG_ARCH_BCMBCA 64-bit ARM
counterpart to support the newly added BCA SocS
-----BEGIN PGP SIGNATURE-----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=QpXj
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=oVJK
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.20/defconfig-arm64' of https://github.com/Broadcom/stblinux into arm/defconfig
This pull request contains Broadcom ARM64-based SoCs defconfig changes
for 5.10, please pull the following:
- Nicolas enables CONFIG_DRM_V3D in order for the Raspberry Pi 4 systems
to load the proper GPU module driver
- William enables the newly introduced CONFIG_ARCH_BCMBCA 64-bit ARM
counterpart to support the newly added BCA SocS
* tag 'arm-soc/for-5.20/defconfig-arm64' of https://github.com/Broadcom/stblinux:
arm64: defconfig: Enable DRM_V3D
arm64: defconfig: enable bcmbca soc support
Link: https://lore.kernel.org/r/20220711164451.3542127-3-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable the Qualcomm Bandwidth Monitor to allow scaling interconnects
depending on bandwidth usage between CPU and memory. This is used
already on Qualcomm SDM845 SoC.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220704121730.127925-4-krzysztof.kozlowski@linaro.org
Allwinner provide an audio CODEC as part of their SoCs which is used on a
number of designs, enable the driver as part of defconfig in order to
improve coverage of this in the various automated testing systems.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220701112213.1765599-1-broonie@kernel.org
While enabling QCS404 interconnect driver, I found that other drivers
are missing too, so add all the interconnect driver
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220628045454.621175-2-vkoul@kernel.org
These phys are used for USB controller found in QCS404 board, so enable
them in the defconfig
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220628045454.621175-1-vkoul@kernel.org
Enable gpio-fan support as this is needed by phyBOARD-Polis-i.MX8M Mini.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
BCM2711, the SoC used on the Raspberry Pi 4 has a different GPU than its
predecessors. Enable it.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Enable i.MX93 clk and pinctrl driver for booting the system
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Output Processing Engine (OPE) module is a client of AHUB on Tegra210
and later generations of Tegra SoCs. Enable the driver build to use
this in audio path.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable CONFIG_ARCH_BCMBCA in defconfig. This config can be used to build
a basic kernel for arm64 based Broadcom Broadband SoC booting to
console.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
This enables the GPI DMA driver, providing access to I2C and SPI
controllers that are setup for shared ownership. The PCIe Gen2 PHY
provides PCI support on the QCS405 platform, among others. The PMIC
watchdog, concell and ADC5 ThermalMonitor drivers provides housekeeping
services on a range of different platforms.
The Display and Video clock controllers for SM8250 are enabled, as is
the audio RX/TX macros and the WCD9335 audio codec driver.
Lastly the Ath11k driver, used on a variety of modern boards and the
FastRPC driver, which provides an interface for computational offloading
on the Hexagon cores, are enabled.
All drivers, except the SM8250 Display and Video clock controller
drivers are enabled as modules. The two clock controllers provides
power-domains and must be builtin to reduce the risk of probe deferral
happening (and being ignored) after late initcall.
-----BEGIN PGP SIGNATURE-----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=BrN9
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=BAuz
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-defconfig-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig
Qualcomm ARM64 defconfig updates for v5.19
This enables the GPI DMA driver, providing access to I2C and SPI
controllers that are setup for shared ownership. The PCIe Gen2 PHY
provides PCI support on the QCS405 platform, among others. The PMIC
watchdog, concell and ADC5 ThermalMonitor drivers provides housekeeping
services on a range of different platforms.
The Display and Video clock controllers for SM8250 are enabled, as is
the audio RX/TX macros and the WCD9335 audio codec driver.
Lastly the Ath11k driver, used on a variety of modern boards and the
FastRPC driver, which provides an interface for computational offloading
on the Hexagon cores, are enabled.
All drivers, except the SM8250 Display and Video clock controller
drivers are enabled as modules. The two clock controllers provides
power-domains and must be builtin to reduce the risk of probe deferral
happening (and being ignored) after late initcall.
* tag 'qcom-arm64-defconfig-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: Enable Qualcomm GPI DMA Driver
arm64: defconfig: Enable Qualcomm PCIe Gen2 PHY
arm64: defconfig: Enable SM8250 video clock controller
arm64: defconfig: Enable PM8916 watchdog driver
arm64: defconfig: enable ath11k driver
arm64: defconfig: Enable some Qualcomm drivers
arm64: defconfig: reenable SM_DISPCC_8250
arm64: defconfig: enable wcd9335 codec as module
arm64: defconfig: enable Qualcomm RX and TX macro for SM8250 audio
Link: https://lore.kernel.org/r/20220509170158.311962-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Enable the WM8524 codec driver as module in arm64 defconfig for audio
support on imx8mn-evk board.
- Enable the ADC part of the STMPE MFD in imx_v6_v7_defconfig, as the
SoM Apalis/Colibri iMX6 use the ADC of a STMPE 811.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmJ3OOMUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM43JwgAgKOb0UndVfyEOV02LPQoVYiEN0P9
cKbenz/IpXFT0fDYyTezg1BmU7T5KH4dg8R40JZdmeOjhEkpigXs1EEVEeBy9Dws
j7RjV+vL/i4shN4j6dYXsWGxLf3E96eNIqMfy4kRfJygTbg/99sgC/YT29OI1TJO
uyJJHqmBvLcfG4kAoYc3W17PM37JD9T6A3DvDZTn5PRgBd8ywK5ydyrqgKgTG6f9
CD6nIyW396rC26+v0Gzrc/0zgxGjLJznD2iiGxyR8Sa6ILYdyXQEIsK5XOst9/PS
E0EnM3HA3icr1bvUUyztdRBuRlYq/BR73GCAWHSpi55Nfh5bT3dCHrpZwQ==
=kFqE
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=pAvl
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig
i.MX defconfig update for 5.19:
- Enable the WM8524 codec driver as module in arm64 defconfig for audio
support on imx8mn-evk board.
- Enable the ADC part of the STMPE MFD in imx_v6_v7_defconfig, as the
SoM Apalis/Colibri iMX6 use the ADC of a STMPE 811.
* tag 'imx-defconfig-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: defconfig: Enable the WM8524 codec driver
ARM: imx_v6_v7_defconfig: Enable the ADC part of the STMPE MFD
Link: https://lore.kernel.org/r/20220508033843.2773685-5-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This enables the driver for the new ASRC audio block that is found on
Tegra186 and later.
-----BEGIN PGP SIGNATURE-----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=U3ik
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=hc0y
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.19-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/defconfig
arm64: tegra: Default configuration updates for v5.19-rc1
This enables the driver for the new ASRC audio block that is found on
Tegra186 and later.
* tag 'tegra-for-5.19-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: defconfig: Build Tegra ASRC module
Link: https://lore.kernel.org/r/20220506143005.3916655-6-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Enable support for the Renesas RZ/G2UL and RZ/V2M SoCs in the arm64
defconfig,
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYnTXKQAKCRCKwlD9ZEnx
cEqvAQCfbX325WAM/lkE6m11gjJCKSbGj3rwHWzigSiTfnaU4gEAnXHWOTFFLej4
l20hPHLNRdG4uG7+yObmpWU8hAX57wA=
=tJKF
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=o8bh
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-defconfig-for-v5.19-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/defconfig
Renesas ARM defconfig updates for v5.19 (take two)
- Enable support for the Renesas RZ/G2UL and RZ/V2M SoCs in the arm64
defconfig,
* tag 'renesas-arm-defconfig-for-v5.19-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: defconfig: Enable Renesas RZ/V2M SoC
arm64: defconfig: Enable ARCH_R9A07G043
Link: https://lore.kernel.org/r/cover.1651828601.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
