Refactor J784s4 SoC files to a common file which uses the
superset device to allow reuse in j742s2-evm which uses the subset part.
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Reviewed-by: Beleswar Padhi <b-padhi@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20240902-b4-upstream-j742s2-v6-1-6a7aa2736797@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
assigned-clock sets DEV_RTIx_RTI_CLK(id:0) whereas clocks sets
DEV_RTIx_RTI_CLK_PARENT_GLUELOGIC_HFOSC0_CLKOUT(id:1)[1]. This does not
look right, the timers in the driver assume a max frequency of 32kHz for
the heartbeat (HFOSC0 is 19.2MHz on j784s4-evm).
With this change, WDIOC_GETTIMELEFT return coherent time left
(DEFAULT_HEARTBEAT=60, reports 60s upon opening the cdev).
[1] https://software-dl.ti.com/tisci/esd/latest/5_soc_doc/j784s4/clocks.html#clocks-for-rti0-device
Fixes: caae599de8 ("arm64: dts: ti: k3-j784s4-main: Add the main domain watchdog instances")
Suggested-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Eric Chanudet <echanude@redhat.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20240805174330.2132717-2-echanude@redhat.com
Signed-off-by: Nishanth Menon <nm@ti.com>
On J784S4 SoC, the AUDIO_REFCLK1 can be used as input to external
peripherals when configured through CTRL_MMR.
Add audio_refclk1 node which would be used as system clock for
audio codec PCM3168A.
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Link: https://lore.kernel.org/r/20240626101645.36764-3-j-choudhary@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Add McASP 0-4 instances and keep them disabled because several
required properties are missing as they are board specific.
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Link: https://lore.kernel.org/r/20240626101645.36764-2-j-choudhary@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
TI's J784S4 SoC has four instances of Gen3 PCIe Controllers namely
PCIe0, PCIe1, PCIe2 and PCIe3. PCIe0 and PCIe1 are 4-Lane controllers
while PCIe2 and PCIe3 are 2-Lane controllers.
Add support for the Root Complex Mode of operation of these PCIe instances.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://lore.kernel.org/r/20240529082259.1619695-2-s-vadapalli@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Add support for the USB 3.0 controller
Signed-off-by: Matt Ranostay <mranostay@ti.com>
Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # k3-j784s4-evm
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20240507095545.8210-2-r-gunasekaran@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
J784S4 SoC has MAIN CPSW2G and CPSW9G instances of the CPSW
Ethernet Switch. CPSW2G has 1 external port and 1 host port
while CPSW9G has 8 external ports and 1 host port.
Add device-tree nodes for MAIN CPSW2G and CPSW9G and disable
them by default. MAIN CPSW2G will be enabled in the board file
while device-tree overlays will be used to enable CPSW9G.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Chintan Vankar <c-vankar@ti.com>
Link: https://lore.kernel.org/r/20240502091002.3659435-3-c-vankar@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Remove sdhci-caps-mask to enable support for SDR104 speed mode for
SD card and remove no-1-8-v property so that SD card can work in
any UHS-1 high speed mode it can support.
Fixes: 4664ebd834 ("arm64: dts: ti: Add initial support for J784S4 SoC")
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Signed-off-by: Dasnavis Sabiya <sabiya.d@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Judith Mendez <jm@ti.com>
Link: https://lore.kernel.org/r/20240423151732.3541894-6-jm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
As described in the binding document for the "current-speed" property:
"This should only be present in case a driver has no chance to know the
baud rate of the slave device."
This is not the case for the UART used in K3 devices, the current
baud-rate can be calculated from the registers. Having this property
has the effect of actually skipping the baud-rate setup in some drivers
as it assumes it will already be set to this rate, which may not always
be the case.
It seems this property's purpose was mistaken as selecting the desired
baud-rate, which it does not. It would have been wrong to select that
here anyway as DT is not the place for configuration, especially when
there are already more standard ways to set serial baud-rates.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240326185441.29656-6-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Change offset in mux-reg-masks property for serdes_ln_ctrl node
since reg-mux property is used in compatible.
Fixes: 2765149273 ("mux: mmio: use reg property when parent device is not a syscon")
Signed-off-by: Chintan Vankar <c-vankar@ti.com>
Acked-by: Andrew Davis <afd@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://lore.kernel.org/r/20240213080348.248916-1-s-vadapalli@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
J784S4 has three CSI2RX capture subsystem featuring Cadence CSI2RX,
DPHY and TI's pixel grabbing wrapper. Add nodes for the same and
keep them disabled by default. J784S4 uses a dedicated BCDMA instance
for CSI-RX traffic, so enable that as well.
J784S4 TRM (Section 12.7 Camera Subsystem):
https://www.ti.com/lit/zip/spruj52
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Reviewed-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20240215085518.552692-9-vaishnav.a@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Modify license to include dual licensing as GPL-2.0-only OR MIT
license for SoC and TI evm device tree files. This allows for Linux
kernel device tree to be used in other Operating System ecosystems
such as Zephyr or FreeBSD.
While at this, update the GPL-2.0 to be GPL-2.0-only to be in sync
with latest SPDX conventions (GPL-2.0 is deprecated).
While at this, update the TI copyright year to sync with current year
to indicate license change (and add it at least for one file which was
missing TI copyright).
Cc: Apelete Seketeli <aseketeli@baylibre.com>
Cc: Jerome Neanne <jneanne@baylibre.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Tony Lindgren <tony@atomide.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240122145539.194512-11-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
DDR50 speed mode is enabled for MMCSD in J784s4 but its Itap Delay
Value is not present in the device tree. Thus, add Itap Delay Value
for MMCSD High Speed DDR which is DDR50 speed mode for J784s4 SoC
according to datasheet for J784s4.
[+] Refer to : section 7.10.5.17.2 MMC1/2 - SD/SDIO Interface, in
J784s4 datasheet
- https://www.ti.com/lit/ds/symlink/tda4vh-q1.pdf
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Reviewed-by: Judith Mendez <jm@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20231201082045.790478-4-b-kapoor@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Add additional reg properties for UDMA and RingAcc nodes which are
mostly used by bootloader components before Device Manager firmware
services are available, in order to setup DMA transfers.
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20231213135138.929517-3-vigneshr@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Add DSS and DP-bridge node for J784S4 SoC. DSS IP in J784S4 is
same as DSS IP in J721E, so same compatible is being used.
The DP is Cadence MHDP8546.
Disable them by default as nodes are missing port definition
and phy link configurations which are added later in platform
dt file.
Signed-off-by: Rahul T R <r-ravikumar@ti.com>
[j-choudhary@ti.com: move dss & mhdp node together in main, fix dss node]
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20231019054022.175163-4-j-choudhary@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
J784S4 SoC has 4 Serdes instances along with their respective WIZ
instances. Add device-tree nodes for them and disable them by default
as the node is incomplete and phy link properties will be added in
the platform dt file.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
[j-choudhary@ti.com: fix serdes_wiz clock order & disable serdes refclk]
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20231019054022.175163-3-j-choudhary@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
The system controller node manages the CTRL_MMR0 region.
Add serdes_ln_ctrl node which is used for controlling the SERDES lane mux.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
[j-choudhary@ti.com: Fix serdes_ln_ctrl node]
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20231019054022.175163-2-j-choudhary@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
There are totally 19 instances of watchdog module. One each for the
8 A72 cores, one each for the 4 C7x cores, 1 for the GPU, 1 each
for the 6 R5F cores in the main domain. The non-A72 instances are
coupled with the R5Fs, C7x & GPU instances. Keeping them as reserved as
they are not used by A72.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Link: https://lore.kernel.org/r/20231008044657.25788-5-j-keerthy@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Patch adds the ESM instances for J784s4. It has 3 instances.
One in the main domain and two in the mcu-wakeup domain.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Link: https://lore.kernel.org/r/20231008044657.25788-3-j-keerthy@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
J784S4 has a dedicated BCDMA controller for the Camera Serial Interface.
Events from the BCDMA controller instance are routed through the
main UDMA interrupt aggregator as unmapped events. Add the node for
the DMA controller and keep it disabled by default.
See J784S4 Technical Reference Manual (SPRUJ52)
for further details: http://www.ti.com/lit/zip/spruj52
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Reviewed-by: Jayesh Choudhary <j-choudhary@ti.com>
Link: https://lore.kernel.org/r/20231010111723.17524-3-vaishnav.a@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
bootph-all as phase tag was added to dt-schema
(dtschema/schemas/bootph.yaml) to cover U-Boot challenges with DT.
That's why add it also to Linux to be aligned with bootloader requirement.
On TI K3 J784S4 SoC, only secure_proxy_mcu and secure_proxy_sa3 nodes are
exclusively used by R5 bootloader, rest of the dts nodes with bootph-* are
used by later boot stages also.
And secure_proxy_mcu and secure_proxy_sa3 are disabled in kernel device
tree, and will be only enabled in R5 bootloader device tree.
So, bootph-pre-ram for secure_proxy_mcu and secure_proxy_sa3 will be
added in R5 bootloader device tree only.
Add bootph-all for all other nodes that are used in the bootloader on
K3 J784S4 SoC, and bootph-pre-ram is not needed specifically for any node
in kernel dts.
Signed-off-by: Apurva Nandan <a-nandan@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20230811192030.3480616-2-a-nandan@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
C7x DSP nodes defined in the top-level J784s4 SoC dtsi files are incomplete
and will not be functional unless they are extended with both mboxes and
memory-region information.
As theses only known about at the board integration level, these nodes
should only be enabled when provided with this information.
Disable the C7x DSP nodes in the dtsi files and only enable the ones that
are given the required mboxes and memory-region on a given board.
Signed-off-by: Andrew Davis <afd@ti.com>
Acked-by: Hari Nagalla <hnagalla@ti.com>
Tested-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20230809180145.53158-2-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
This patch fixes the interrupt range for wakeup and main domain gpio
interrupt routers. They were wrongly subtracted by 32 instead of
following what is defined in the interrupt map in the TRM (Table 9-35).
Link: http://www.ti.com/lit/pdf/spruj52
Fixes: 4664ebd834 ("arm64: dts: ti: Add initial support for J784S4 SoC")
Signed-off-by: Apelete Seketeli <aseketeli@baylibre.com>
Signed-off-by: Esteban Blanc <eblanc@baylibre.com>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20230810-tps6594-v6-4-2b2e2399e2ef@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Add register range of ringacc cfg node to all k3 SoC dtsi files. This is
normally under Device Management firmware control but some entities like
bootloader have to access directly and thus required to be present in DT.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20230809175932.2553156-3-vigneshr@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
There are timer IO pads in the MCU domain, and in the MAIN domain.
These pads can be muxed for the related timers.
The details of the multiplexing can be found in the register
documentation and Technical Reference Manual[1].
These are similar to J721e/J7200, but have different mux capabilities.
[1] http://www.ti.com/lit/zip/spruj52
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20230531213215.602395-7-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
There are 20 general purpose timers on j784s4 that can be used for
things like PWM using pwm-omap-dmtimer driver. There are also
additional ten timers in the MCU domain which are meant for MCU
firmware usage and hence marked reserved by default.
Though the count is similar to J721e/J7200/j721s2, the device IDs
and clocks used in j784s4 are different with the option of certain
clocks having options of additional clock muxes. Since there is very
minimal reuse, it is cleaner to integrate as part of SoC files itself.
The defaults are configured for clocking the timers from system
clock(HFOSC0).
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20230531213215.602395-6-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
eMMC tuning was incomplete earlier, so support for high speed modes was
kept disabled. Remove no-1-8-v property to enable support for high
speed modes for eMMC in J784S4 SoC.
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Link: https://lore.kernel.org/r/20230502090814.144791-1-b-kapoor@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
The J784S4 SoCs have four TMS320C71x DSP subsystems in the MAIN voltage
domain. The functionality of these DSP subsystems is similar to the C71x
DSP subsystems on earlier k3 device J721S2. Each subsystem has a 48 KB of
L1D configurable SRAM/Cache and 512 KB of L2 SRAM/Cache. This subsystem
has a CMMU but is not currently used. The inter-processor communication
between the main A72 cores and the C71x DSPs is achieved through shared
memory and mailboxes. Add the DT nodes for these DSP processor sub-systems.
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Link: https://lore.kernel.org/r/20230502231527.25879-3-hnagalla@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
The J784S4 SoCs have 4 dual-core Arm Cortex-R5F processor (R5FSS)
subsystems/clusters. One R5F cluster (MCU_R5FSS0) is present within
the MCU domain, and the remaining three clusters are present in the
MAIN domain (MAIN_R5FSS0, MAIN_R5FSS1 & MAIN_R5FSS2). The functionality
of the R5FSS is same as the R5FSS functionality on earlier K3 platform
device J721S2. Each of the R5FSS can be configured at boot time to be
either run in a LockStep mode or in an Asymmetric Multi Processing (AMP)
fashion in Split-mode. These subsystems have 64 KB each Tightly-Coupled
Memory (TCM) internal memories for each core split between two banks -
ATCM and BTCM (further interleaved into two banks). There are some IP
integration differences from standard Arm R5 clusters such as the absence
of an ACP port, presence of an additional TI-specific Region Address
Translater (RAT) module for translating 32-bit CPU addresses into
larger system bus addresses etc.
Add the DT nodes for the R5F cluster/subsystems, the two R5F cores are
each added as child nodes to the corresponding cluster node. The clusters
are configured to run in LockStep mode by default, with the ATCMs enabled
to allow the R5 cores to execute code from DDR with boot-strapping code
from ATCM. The inter-processor communication between the main A72 cores
and these processors is achieved through shared memory and Mailboxes.
The following firmware names are used by default for these cores, and
can be overridden in a board dts file if needed:
MAIN R5FSS0 Core0: j784s4-main-r5f0_0-fw (both in LockStep and Split modes)
MAIN R5FSS0 Core1: j784s4-main-r5f0_1-fw (needed only in Split mode)
MAIN R5FSS1 Core0: j784s4-main-r5f1_0-fw (both in LockStep and Split modes)
MAIN R5FSS1 Core1: j784s4-main-r5f1_1-fw (needed only in Split mode)
MAIN R5FSS2 Core0: j784s4-main-r5f2_0-fw (both in LockStep and Split modes)
MAIN R5FSS2 Core1: j784s4-main-r5f2_1-fw (needed only in Split mode)
MCU R5FSS0 Core0: j784s4-mcu-r5f0_0-fw (needed only in Split mode)
MCU R5FSS0 Core1: j784s4-mcu-r5f0_1-fw (needed only in Split mode)
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Link: https://lore.kernel.org/r/20230502231527.25879-2-hnagalla@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
J784S4 has 8 MCSPI instances in the main domain and 3 instances
in the MCU domain. Add the DT nodes for all the 11 instances and
keep them disabled. MAIN_MCSPI4 is connected as a slave to MCU_MCSPI2
by default at power-up, MAIN_MCSPI4 and MCU_MCSPI2 are not pinned out
externally.
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Reviewed-by: Keerthy <j-keerthy@ti.com>
Link: https://lore.kernel.org/r/20230321082827.14274-5-vaishnav.a@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Add the node for SA2UL to support hardware crypto algorithms,
including SHA-1/256/512, AES, 3DES and AEAD suites.
Add rng node for hardware random number generator.
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Reviewed-by: Kamlesh Gurudasani <kamlesh@ti.com>
Link: https://lore.kernel.org/r/20230314152611.140969-3-j-choudhary@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
The J784S4 SoC belongs to the K3 Multicore SoC architecture
platform, providing advanced system integration in automotive,
ADAS and industrial applications requiring AI at the network edge.
This SoC extends the K3 Jacinto 7 family of SoCs with focus on
raising performance and integration while providing interfaces,
memory architecture and compute performance for multi-sensor, high
concurrency applications.
Some highlights of this SoC are:
* Up to 8 Cortex-A72s, four clusters of lockstep capable dual Cortex-R5F
MCUs, 4 C7x floating point vector DSPs with Matrix Multiply Accelerator
(MMA) for deep learning and CNN.
* 3D GPU: Automotive grade IMG BXS-4-64
* Vision Processing Accelerator (VPAC) with image signal processor and
Depth and Motion Processing Accelerator (DMPAC)
* Three CSI2.0 4L RX plus two CSI2.0 4L TX, two DSI Tx, one eDP/DP and one
DPI interface.
* Integrated gigabit ethernet switch, up to 8 ports (TDA4VH), two ports
support 10Gb USXGMII; Two 4 lane PCIe-GEN3 controllers, USB3.0 Dual-role
device subsystems, Up to 20 MCANs, among other peripherals.
See J784S4 Technical Reference Manual (SPRUJ52 - JUNE 2022)
for further details: http://www.ti.com/lit/zip/spruj52
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Apurva Nandan <a-nandan@ti.com>
Reviewed-by: Vaishnav Achath <vaishnav.a@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20230112142725.77785-4-a-nandan@ti.com
