This moves pinmux child nodes for sdhci0 node from k3-am62x-sk-common
to each top level board file. This is needed since we require internal
pullups for AM62x SK and not for AM62 LP SK since it has external
pullups on DATA 1-7.
Internal pulls are required for AM62 SK as per JESD84 spec
recommendation to prevent unconnected lines floating.
Fixes: d19a66ae48 ("arm64: dts: ti: k3-am625-sk: Enable on board peripherals")
Cc: stable@vger.kernel.org
Signed-off-by: Judith Mendez <jm@ti.com>
Link: https://lore.kernel.org/r/20250707190830.3951619-1-jm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
The bootph-all flag was introduced in dt-schema
(dtschema/schemas/bootph.yaml) to define node usage across
different boot phases.
For eMMC and SD boot modes, voltage regulator nodes, io-expander
nodes, gpio nodes, and MMC nodes need to be present in all boot
stages, so add missing bootph-all phase flag to these nodes to
support SD boot and eMMC boot.
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: Moteen Shah <m-shah@ti.com>
Link: https://lore.kernel.org/r/20250429151454.4160506-2-jm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
The NAND expansion card (PROC143E1) connects over the User/MCU/PRU
Expansion port on the am62-lp-sk EVM.
The following pins are shared between McASP1 and GPMC-NAND so
both cannot work simultaneously.
Pin name McASP1 function GPMC function
======== =============== =============
J17 MCASP1_AXR0 GPMC0_WEN
P21 MCASP1_AFSX GPMC0_WAIT0
K17 MCASP1_ACLKX GPMC0_BE0N_CLE
K20 MCASP1_AXR2 GPMC0_ADVN_ALE
The factory default sets the pins for McASP1 use. (i.e.
Resistor Array RA1 installed, RA4 not installed).
For NAND use, RA1 has to be removed and RA4 must be
installed.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20240622-am62lp-sk-nand-v1-2-caee496eaf42@kernel.org
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
On am62-lp-sk the PMIC is not wired up to a power button. Remove this
property. This fixes issues observed when entering a very deep sleep
state that is not yet available upstream.
Fixes: e6a51ffabf ("arm64: ti: dts: Add support for AM62x LP SK")
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://lore.kernel.org/r/20240325152029.2933445-1-msp@baylibre.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Modify license to include dual licensing as GPL-2.0-only OR MIT
license for SoC and TI evm device tree files. This allows for Linux
kernel device tree to be used in other Operating System ecosystems
such as Zephyr or FreeBSD.
While at this, update the GPL-2.0 to be GPL-2.0-only to be in sync
with latest SPDX conventions (GPL-2.0 is deprecated).
While at this, update the TI copyright year to sync with current year
to indicate license change (and add it at least for one file which was
missing TI copyright).
Cc: Guillaume La Roque <glaroque@baylibre.com>
Cc: Julien Panis <jpanis@baylibre.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Pierre Gondois <pierre.gondois@arm.com>
Cc: Roger Quadros <rogerq@kernel.org>
Cc: Ronald Wahl <ronald.wahl@raritan.com>
Cc: Sarah Walker <sarah.walker@imgtec.com>
Cc: Tony Lindgren <tony@atomide.com>
Acked-by: Guillaume La Roque <glaroque@baylibre.com>
Acked-by: Julien Panis <jpanis@baylibre.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Pierre Gondois <pierre.gondois@arm.com>
Acked-by: Roger Quadros <rogerq@kernel.org>
Acked-by: Ronald Wahl <ronald.wahl@raritan.com>
Acked-by: Sarah Walker <sarah.walker@imgtec.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240122145539.194512-4-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Prepare for pinctrl-single yaml binding and unify pin group node names.
Let's standardize on pin group node naming ending in -pins. As we don't
necessarily have a SoC specific compatible property for pinctrl-single.
I'd rather not add a pattern match for pins somewhere in the name for all
the users.
Trying to add matches for pins-default will be futile as on the earlier
SoCs we've already seen names like pins-sleep, pins-idle, pins-off and so
on that would need to be matched.
And as the node is a pin group, let's prefer to use naming -pins rather
than -pin as more pins may need to be added to the pin group later on.
Signed-off-by: Tony Lindgren <tony@atomide.com>
[vigneshr@ti.com: Rebase onto latest ti/next and extend to new nodes]
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
The AM62x LP SK board is similar to the AM62x SK board, but has some
not-so-minor changes that requires different device tree.
The differences are mainly:
- AM62x SoC in the AMC package that meets AECQ100 automotive standard.
- LPDDR4 versus DDR4 on the AM62x SK.
- TPS65219 PMIC instead of discrete regulators.
- IO expander pin names are wired differently.
- Second ethernet port is currently disabled as the boards do not have
the part physically installed.
- OSPI NAND vs OSPI NOR.
- No WLAN chip instead a SDIO M.2 connector.
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
[vigneshr@ti.com: Add PMIC node]
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20230321-am62-lp-sk-v2-3-0a56e1694804@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
