There is new support for additional on-chip devices on Apple, Mediatek,
Renesas, Rockchip, Samsung, Google, TI, ST, Nvidia and Amlogic devices.
The Arm Morello reference platform gets a devicetree for booting in
normal aarch64 mode. The hardware supports experimental CHERI support,
which requires a modified kernel.
The AMD (formerly Xilinx) Versal NET SoC gets added, this is a combined
FPGA with Cortex-A78 CPUs in a SoC.
Six new ST STM32MP2 SoC variants are added. Like the earlier STM32MP25,
the MP211, MP213, MP215, MP231, MP233 and MP235 models are based on one
or two Cortex-A35 cores but each feature a different set of I/O devices.
Mediatek MT8370 is a minor variation of MT8390 with fewer CPU and
GPU cores
Apple T2 is the baseboard management controller on earlier Intel CPU
based Macs, with 16 models now gaining initial support.
All the above come with dts files for the reference boards. In
addition, these boards are added for the SoCs that are already supported.
- The Milk-V Jupiter board based on SpacemiT K1/M1
- NetCube Systems Kumquat board based on the 32-bit Allwinner V3s SoC
- Three boards based on 32-bit stm32mp1
- 11 distinct board variants from Toradex and one from Variscite,
all based on i.MX6
- Google Pixel Pro 6 phone based on gs101 (Tensor)
- Three additional variants of the i.MX8MP based "Skov" board
- A second variant of the i.MX95 EVK board
- Two boards based on Renesas SoCs
- Four boards based the Rockchip RK35xx series, plus the RK3588
"MNT Reform 2" laptop
-----BEGIN PGP SIGNATURE-----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=6ZZ6
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC devicetree updates from Arnd Bergmann:
"There is new support for additional on-chip devices on Apple,
Mediatek, Renesas, Rockchip, Samsung, Google, TI, ST, Nvidia and
Amlogic devices.
The Arm Morello reference platform gets a devicetree for booting in
normal aarch64 mode. The hardware supports experimental CHERI support,
which requires a modified kernel.
The AMD (formerly Xilinx) Versal NET SoC gets added, this is a
combined FPGA with Cortex-A78 CPUs in a SoC.
Six new ST STM32MP2 SoC variants are added. Like the earlier
STM32MP25, the MP211, MP213, MP215, MP231, MP233 and MP235 models are
based on one or two Cortex-A35 cores but each feature a different set
of I/O devices.
Mediatek MT8370 is a minor variation of MT8390 with fewer CPU and GPU
cores
Apple T2 is the baseboard management controller on earlier Intel CPU
based Macs, with 16 models now gaining initial support.
All the above come with dts files for the reference boards. In
addition, these boards are added for the SoCs that are already
supported:
- The Milk-V Jupiter board based on SpacemiT K1/M1
- NetCube Systems Kumquat board based on the 32-bit Allwinner V3s SoC
- Three boards based on 32-bit stm32mp1
- 11 distinct board variants from Toradex and one from Variscite, all
based on i.MX6
- Google Pixel Pro 6 phone based on gs101 (Tensor)
- Three additional variants of the i.MX8MP based "Skov" board
- A second variant of the i.MX95 EVK board
- Two boards based on Renesas SoCs
- Four boards based the Rockchip RK35xx series, plus the RK3588 'MNT
Reform 2' laptop"
* tag 'soc-dt-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (538 commits)
arm64: dts: Add gpio_intc node for Amlogic A5 SoCs
arm64: dts: Add gpio_intc node for Amlogic A4 SoCs
arm64: dts: hi3660: Add property for fixing CPUIdle
arm64: dts: rockchip: remove ethm0_clk0_25m_out from Sige5 gmac0
arm64: dts: marvell: Use preferred node names for "simple-bus"
arm64: dts: marvell: Drop unused CP11X_TYPE define
arm64: dts: marvell: Move arch timer and pmu nodes to top-level
arm64: dts: rockchip: Fix PWM pinctrl names
arm64: dts: rockchip: fix RK3576 SCMI clock IDs
dt-bindings: clock: rk3576: add SCMI clocks
arm64: dts: rockchip: Fix pcie reset gpio on Orange Pi 5 Max
arm64: dts: amd/seattle: Drop undocumented "spi-controller" properties
arm64: dts: amd/seattle: Fix bus, mmc, and ethernet node names
arm64: dts: amd/seattle: Move and simplify fixed clocks
arm64: dts: amd/seattle: Base Overdrive B1 on top of B0 version
arm64: dts: rockchip: Enable HDMI audio output for ArmSoM Sige7
arm64: dts: rockchip: Enable onboard eMMC on Radxa E20C
arm64: dts: rockchip: Add SDHCI controller for RK3528
arm64: dts: rockchip: Remove bluetooth node from rock-3a
arm64: dts: rockchip: Move rk356x scmi SHMEM to reserved memory
...
0x0 to 0xf0000000 are SDRAM memory areas where 0x10f000 is located.
So move the SHMEM memory of arm_scmi to the reserved memory node.
Fixes: a3adc0b907 ("arm64: dts: rockchip: add core dtsi for RK3568 SoC")
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://lore.kernel.org/r/20250308100001.572657-2-amadeus@jmu.edu.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Rockchip 356x device-tree now supports GIC ITS. Move PCIe controller's
MSI to use ITS instead of MBI. This removes extra CPU overhead of handling
PCIe MBIs by letting GIC's ITS to serve the PCIe MSIs.
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250216221634.364158-4-dmitry.osipenko@collabora.com
Rockchip 356x SoC's GIC has two hardware integration issues that
affect MSI functionality of the GIC. Previously, both these GIC
issues were worked around by using MBI for MSI instead of ITS
because kernel GIC driver didn't have necessary quirks.
First issue is about RK356x GIC not supporting programmable
shareability, while reporting it as supported in a GIC's feature
register. Rockchip assigned Erratum ID #3568001 for this issue. This
patch adds dma-noncoherent property to the GIC node, denoting that a SW
workaround is required for mitigating the issue.
Second issue is about GIC AXI master interface addressing limited to
the first 4GB of physical address space. Rockchip assigned Erratum
ID #3568002 for this issue.
Now that kernel supports quirks for both of the erratums, add
MSI controller node to RK356x device-tree.
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250216221634.364158-3-dmitry.osipenko@collabora.com
Rename the Rockchip RK356x SoC dtsi files and, consequently, adjust their
contents appropriately, to prepare them for the ability to specify different
CPU and GPU OPPs for each of the supported RK356x SoC variants.
The first new RK356x SoC variant to be introduced is the RK3566T, which the
Pine64 Quartz64 Zero SBC is officially based on. [1] Some other SBCs are
also based on the RK3566T variant, including Radxa ROCK 3C and ZERO 3E/3W,
but the slight trouble is that Radxa doesn't state that officially. Though,
it's rather easy to spot the RK3566T on such boards, because their official
specifications state that the maximum frequency for the Cortex-A55 cores is
lower than the "full-fat" RK3566's 1.8 GHz. [2][3][4]
These changes follow the approach used for the Rockchip RK3588 SoC variants,
which was introduced and described further in commit def88eb4d8 ("arm64:
dts: rockchip: Prepare RK3588 SoC dtsi files for per-variant OPPs"). Please
see that commit for a more detailed explanation.
No functional changes are introduced, which was validated by decompiling and
comparing all affected board dtb files before and after these changes. In
more detail, the affected dtb files have some of their blocks shuffled around
a bit and some of their phandles have different values, as a result of the
changes to the order in which the building blocks from the parent dtsi files
are included, but they effectively remain the same as the originals.
As a side note, due to the nature of introduced changes, this commit is a bit
more readable when viewed using the --break-rewrites option for git-log(1).
[1] https://wiki.pine64.org/wiki/Quartz64
[2] https://dl.radxa.com/rock3/docs/hw/3c/radxa_rock3c_product_brief.pdf
[3] https://dl.radxa.com/zero3/docs/hw/3e/radxa_zero_3e_product_brief.pdf
[4] https://dl.radxa.com/zero3/docs/hw/3w/radxa_zero_3w_product_brief.pdf
Related-to: def88eb4d8 ("arm64: dts: rockchip: Prepare RK3588 SoC dtsi files for per-variant OPPs")
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/77e7450b8280bbdf4e2dc47366c9da85d4d8d1de.1730516702.git.dsimic@manjaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
