The preferred nodename for fixed-regulators has changed to
pattern: '^regulator(-[0-9]+v[0-9]+|-[0-9a-z-]+)?$'
Fix all Rockchip DT regulator nodenames.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/0ae40493-93e9-40cd-9ca9-990ae064f21a@gmail.com
[adapted rebased on top of a number of other changes and included
neu6a-wifi + wolfvision-pf5-io-expander overlays]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Property 'rockchip,system-power-controller' was deprecated in commit
961748bb15 ("dt-bindings: mfd: rk8xx: Deprecate rockchip,system-power-controller")
in the "rockchip,rk{805,808,809,817,818}.yaml" mtd bindings and its
replacement is (just) 'system-power-controller'.
Update the rk356x DT files which still used the deprecated variant.
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/20241008105450.20648-6-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The vendor prefix for Hardkernel ODROID-M1 is incorrectly listed as
rockchip. Use the proper hardkernel vendor prefix for this board, while
at it also drop the redundant soc prefix.
Fixes: fd35832677 ("arm64: dts: rockchip: Add Hardkernel ODROID-M1 board")
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20240827211825.1419820-3-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The 'regulator-init-microvolt' property is not currently supported by
any driver, it was simply carried on from downstream kernels.
The problem is also indicated by the following dtbs_check warning:
rk3588-rock-5b.dtb: pmic@0: regulators:dcdc-reg4: Unevaluated properties are not allowed ('regulator-init-microvolt' was unexpected)
Remove the invalid property from all affected DTS files.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20230707162217.675390-1-cristian.ciocaltea@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add the infrared receiver and its associated pinctrl entry. Note that
there is an external pullup to VCC3V3_SYS.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Tested-by: Dan Johansen <strit@manjaro.org>
Link: https://lore.kernel.org/r/20220930051246.391614-14-aurelien@aurel32.net
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The Rockchip RK3568 has two USB XHCI controllers. The USB 2.0 signals
are connected to a PHY providing one host-only port and one OTG port.
The USB 3.0 signals are connected to two USB3.0/PCIE/SATA combo PHY.
The ODROID M1 has 2 type A USB 3.0 connectors, with the USB 3.0 signals
connected to the two combo PHYs. For the USB 2.0 signals, one connector
is connected to the host-only PHY and uses the same power switch as the
USB 2.0 ports. The other connector has its own power switch and is
connected to the OTG PHY, which is also connected to a device only
micro-USB connector. The purpose of this micro-USB connector is for
firmware update using the Rockusb vendor specific USB class. Therefore
it does not make sense to enable this port on Linux, and the PHY is
forced to host mode.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Tested-by: Dan Johansen <strit@manjaro.org>
Link: https://lore.kernel.org/r/20220930051246.391614-11-aurelien@aurel32.net
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The Rockchip RK3568 has two USB OHCI/EHCI controllers connected to a PHY
providing one host-only port and one OTG port. On the ODROID-M1, they
are both used in host mode. The USB ports are powered by a DC/DC
converter providing 5V and named VCC5V0_SYS on the schematics, followed
by a power switch.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Tested-by: Dan Johansen <strit@manjaro.org>
Link: https://lore.kernel.org/r/20220930051246.391614-10-aurelien@aurel32.net
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This enables the i2s0 controller and the hdmi-sound node on the
ODROID-M1.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Tested-by: Dan Johansen <strit@manjaro.org>
Link: https://lore.kernel.org/r/20220930051246.391614-8-aurelien@aurel32.net
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
On the ODROID-M1, the I2S1 TDM controller is connected to the rk809
codec in I2S mode. It is used to provide a stereo headphones output and
a mono speaker output. A GPIO with an external pullup is used as an
headphone detection input.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Tested-by: Dan Johansen <strit@manjaro.org>
Link: https://lore.kernel.org/r/20220930051246.391614-6-aurelien@aurel32.net
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Enable the Rockchip Serial Flash Controller for the ODROID-M1 and add
the corresponding SPI NOR flash entry. The SFC is used in dual I/O mode
and not quad I/O mode, as the FSPI_D2 pin is shared with the EMMC_RSTn
pin.
The partitions addresses and sizes are taken from the ODROID-M1
Partition Table page on the ODROID wiki.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Tested-by: Dan Johansen <strit@manjaro.org>
Link: https://lore.kernel.org/r/20220930051246.391614-5-aurelien@aurel32.net
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This patch is to add a device tree for new board Hardkernel ODROID-M1
based on Rockchip RK3568, includes basic peripherals -
uart/eMMC/uSD/i2c and on-board ethernet.
Signed-off-by: Dongjin Kim <tobetter@gmail.com>
[aurelien@aurel32.net: addressed issues from initial review]
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Tested-by: Dan Johansen <strit@manjaro.org>
Link: https://lore.kernel.org/r/20220930051246.391614-3-aurelien@aurel32.net
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
