Both the R5S and R5C have a MASKROM button connected via saradc.
For both the R5S as the R5C it's described on page 9 of their
respective schematic, identified as 'Recovery'.
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lore.kernel.org/r/20250716083355.327451-1-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The RTC_HCTOSYS_DEVICE module defaults to rtc0 and should (highly)
preferable be assigned to a battery backed RTC module as it is used to
(re)initialize the system clock.
The R5S and R5C have a connector for a RTC battery which is used by
HYM8563 RTC. Both devices also have another RTC from the rk809 PMIC.
To make sure the HYM8563 is always assigned rtc0, add an alias for it.
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lore.kernel.org/r/20250713161723.270963-1-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add the 3.3v and 1.8v regulators that are connected to
the eMMC on the R5 series devices, as well as adding the
eMMC data strobe, and enable eMMC HS200 mode as the
Foresee FEMDNN0xxG-A3A55 modules support it.
Fixes: c8ec73b05a ("arm64: dts: rockchip: create common dtsi for NanoPi R5 series")
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lore.kernel.org/r/20250506222531.625157-1-pbrobinson@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The preferred nodename for fixed-regulators has changed to
pattern: '^regulator(-[0-9]+v[0-9]+|-[0-9a-z-]+)?$'
Fix all Rockchip DT regulator nodenames.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/0ae40493-93e9-40cd-9ca9-990ae064f21a@gmail.com
[adapted rebased on top of a number of other changes and included
neu6a-wifi + wolfvision-pf5-io-expander overlays]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Property 'rockchip,system-power-controller' was deprecated in commit
961748bb15 ("dt-bindings: mfd: rk8xx: Deprecate rockchip,system-power-controller")
in the "rockchip,rk{805,808,809,817,818}.yaml" mtd bindings and its
replacement is (just) 'system-power-controller'.
Update the rk356x DT files which still used the deprecated variant.
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/20241008105450.20648-6-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The 'regulator-init-microvolt' property is not currently supported by
any driver, it was simply carried on from downstream kernels.
The problem is also indicated by the following dtbs_check warning:
rk3588-rock-5b.dtb: pmic@0: regulators:dcdc-reg4: Unevaluated properties are not allowed ('regulator-init-microvolt' was unexpected)
Remove the invalid property from all affected DTS files.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20230707162217.675390-1-cristian.ciocaltea@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This is for the audio output which does not exist on the boards.
Also disable regulator-always-on for vccio_acodec since it's only
used by the audio output.
Signed-off-by: Tianling Shen <cnsztl@gmail.com>
Link: https://lore.kernel.org/r/20230318083745.6181-6-cnsztl@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
