The preferred nodename for fixed-regulators has changed to
pattern: '^regulator(-[0-9]+v[0-9]+|-[0-9a-z-]+)?$'
Fix all Rockchip DT regulator nodenames.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/0ae40493-93e9-40cd-9ca9-990ae064f21a@gmail.com
[adapted rebased on top of a number of other changes and included
neu6a-wifi + wolfvision-pf5-io-expander overlays]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Property 'rockchip,system-power-controller' was deprecated in commit
961748bb15 ("dt-bindings: mfd: rk8xx: Deprecate rockchip,system-power-controller")
in the "rockchip,rk{805,808,809,817,818}.yaml" mtd bindings and its
replacement is (just) 'system-power-controller'.
Update the rk356x DT files which still used the deprecated variant.
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/20241008105450.20648-6-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Similar to bf6f26deb0 ("arm64: dts: rockchip: Add dma-names to uart1
on quartz64-b") also add the dma-names property to the other rk3566
devices from Pine64 with bluetooth functionality.
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Tested-by: Riley Trautman <asonix.dev@gmail.com>
Link: https://lore.kernel.org/r/20240705163004.29678-4-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Correct the model names of a few Pine64 boards and devices, according
to their official names used on the Pine64 wiki. This ensures consistency
between the officially used names and the names in the source code.
Cc: Marek Kraus <gamiee@pine64.org>
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/06ce014a1dedff11a785fe523056b3b8ffdf21ee.1713832790.git.dsimic@manjaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add ethernet0 alias to the board dts files for a few supported RK3566 boards
that had it missing. Also, remove the ethernet0 alias from one RK3566 SoM
dtsi file, which doesn't enable the GMAC, and add the ethernet0 alias back to
the dependent board dts files, which actually enable the GMAC.
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/d2a272e0ae0fff0adfab8bb0238243b11d348799.1702368023.git.dsimic@manjaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The 'regulator-init-microvolt' property is not currently supported by
any driver, it was simply carried on from downstream kernels.
The problem is also indicated by the following dtbs_check warning:
rk3588-rock-5b.dtb: pmic@0: regulators:dcdc-reg4: Unevaluated properties are not allowed ('regulator-init-microvolt' was unexpected)
Remove the invalid property from all affected DTS files.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20230707162217.675390-1-cristian.ciocaltea@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
In pre-production prototypes (of which I only know one person
having one, Peter Geis), GPIO0 pin A5 was tied to the SDMMC
power enable pin on the CM4 connector. On all production models,
this is not the case; instead, this pin is used for the nEXTRST
signal, and the SDMMC power enable pin is always pulled high.
Since everyone currently using the SOQuartz device trees will
want this change, it is made to the tree without splitting the
trees into two separate ones of which users will then inevitably
choose the wrong one.
This fixes USB and PCIe on a wide variety of CM4IO-compatible
boards which use the nEXTRST signal.
Fixes: 5859b5a9c3 ("arm64: dts: rockchip: add SoQuartz CM4IO dts")
Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Link: https://lore.kernel.org/r/20230421152610.21688-1-frattaroli.nicolas@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Just like the Quartz64 Model B the previously stated speed of sdr-104
in soquartz is too high for the hardware to reliably communicate with
some fast SD cards.
Especially on some carrierboards.
Lower this to sd-uhs-sdr50 to fix this.
Fixes: 5859b5a9c3 ("arm64: dts: rockchip: add SoQuartz CM4IO dts")
Signed-off-by: Dan Johansen <strit@manjaro.org>
Acked-by: Peter Geis <pgwipeout@gmail.com>
Link: https://lore.kernel.org/r/20230304164135.28430-1-strit@manjaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This patch enables the PCIe2 on the CM4IO board when paired with
a SOQuartz CM4 System-on-Module board. combphy2 also needs to be
enabled in this case to make the PHY work for this.
Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Link: https://lore.kernel.org/r/20221112160404.70868-5-frattaroli.nicolas@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This patch enables the i2s0 node on SOQuartz, which is responsible
for hdmi audio, and adds an hdmi-sound node to enable said audio.
Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Link: https://lore.kernel.org/r/20221112160404.70868-4-frattaroli.nicolas@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This patch adds and enables the necessary device tree nodes to
enable video output and HDMI functionality on the SOQuartz module.
Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Link: https://lore.kernel.org/r/20221112160404.70868-3-frattaroli.nicolas@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This is the initial SoQuartz SoM device tree on a CM4IO carrier board.
This board outputs debug on uart2 and supports the following components:
Gigabit Ethernet
USB2 (OTG/Host shared)
PCIe 2.0 x1
HDMI (HDMI Port 0)
eDP (HDMI Port 1)
DSI (RPi compatible pinout)
CSI (RPi compatible pinout)
A/B/G/N WiFi
Bluetooth
SDMMC
eMMC
SPI NOR Flash (Not placed)
PI-40 compatible pin header
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Link: https://lore.kernel.org/r/20220429115252.2360496-7-pgwipeout@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
