Some Powkiddy model names begin with the company "Powkiddy" and others
simply list the model number. Make this consistent across the device
lineup by including the manufacturer in the model name.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20240325175133.19393-4-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Move the vdd_cpu regulator to the device specific dts. This is in
preparation of adding the Powkiddy RGB10MAX3 device, which uses
a different vendor for the CPU regulator at a different i2c address.
Also add a phandle to the bluetooth device so that we can change the
compatible string for the RGB10MAX3. This device uses the same pinouts
but a different bluetooth device.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20240212184950.52210-6-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The Powkiddy RGB30 device is similar to the Anbernic RGxx3 series,
however there are several differences which require deleting nodes in
order to properly define the hardware. This was deemed unacceptable
for the RK2023, so instead create a common include file for the
Powkiddy RGB30 and the Powkiddy RK2023. The only notable difference
between these Powkiddy devices are the panel in use, the device
name, and the PLL_VPLL frequency necessary to support the different
panels.
Since the RK2023 was released on the market first, name the common
include file after it.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20231117202536.1387815-6-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The Powkiddy RGB30 has no onboard UART header, so remove the reference
to it in the device tree. This was left on by mistake in the initial
commit.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20231018153357.343142-4-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Set the VPLL frequency for the RGB30 to 292.5MHz to support running
the 720x720 display panel at 59.97hz. Without this change, the panel
runs at 59.08hz.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20231018153357.343142-3-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The Powkiddy RGB30 is a portable game device based on the Rockchip
RK3566 SoC. It has GPIO buttons on the face and sides for input, stereo
speakers, a 720x720 4 inch DSI display, a USB-C host port and a USB-C
peripheral port, dual SD card slots, WiFi, Bluetooth, and 1GB of RAM.
Working/Tested:
- SDMMC
- UART (for debugging)
- Buttons
- Charging/battery/PMIC
- Speaker/Headphones
- USB
- WiFi
- Bluetooth
- Display (at 59.04hz)
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20231013183918.225666-6-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
