The SW_MACHINE_COVER switch event was added to input event codes to
detect the removal of the back cover of the N900.
But on the PineNote its purpose is to detect when the front cover gets
closed, just like when a laptop lid is closed. Therefore SW_LID is the
appropriate linux code and not SW_MACHINE_COVER.
Reported-by: hrdl <git@hrdl.eu>
Helped-by: phantomas <phantomas@phantomas.xyz>
Link: https://lore.kernel.org/r/270f27c9-afd6-171d-7dce-fe1d71dd8f9a@wizzup.org/
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lore.kernel.org/r/20250526161506.139028-1-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add the recommended chassis-type root node property so userspace can
request the form factor and adjust their behavior accordingly.
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250207111157.297276-1-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This release adds the devicetree files for an impressive number of new
SoC variants, though as expected these are all related to others we
already support:
- The microchip sam9x7 devicetree is now added, after the device driver
and platform code has already made it in. This is likely the last ARMv5
(!) platform to ever get added, updating the 20+ year old at91/sam9
platform wtih DDR3 memory and gigabit ethernet.
- On the Apple platform, there are now devicetree files for a number of
A-series SoCs in addition to the M-series ones, these are used
primarily in phones and tablets, but are closely related to the
already supported chips.
- Samsung Exynos 8895 and Exynos 990 are more phone SoCs used in older
Samsung Galaxy phones.
- Qualcomm Snapdragon 778G (SM7325) is another phone SoC, closely related
to the Snapdragon 7c+ Gen 3 (SC7280) used in low-end laptops.
- Rockchip RK3528 and RK3576 are new variants of their TV box and Tablet
chips, still using the older ARMv8.0 cores from RK3328/RK3399 but
with a newer process and other improvements from the RK35xx (otherwise
ARMv8.2) chips. RK3566T and RK3399-S are also added, these are just
lower-cost versions of their normal counterparts.
- TI J742S2 is a feature-reduced version of the J784s4
industrial/automotive SoC, with fewer CPU cores.
- Sophgo SG2002 is an embedded SoC with one RISC-V (C906) and one ARM
(Cortex-A53) core, at this point support is only added for running
on the RISC-V side on the LicheeRV Nano board.
A total of 92 new .dts files describing individual machines is added,
which must be a new record. The majority of these is for the newly added
chips above, notably all the Apple phones and tablets. The other new
machines include nine industrial/embedded boards with NXP i.MX6 or i.MX8
SoCs, eight for Rockchips RK35XX and one or two each for Rockchips RV1109,
RK3308, Allwinner A33, Tegra 234, Qualcomm qcs9100/sc8280xp/x1e80100,
TI AM625 and Starfive JH7110.
As usual there are also many newlyad added features in existing boards
as well as cleanups and minor bugfixes.
-----BEGIN PGP SIGNATURE-----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=Ha1w
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC devicetree updates from Arnd Bergmann:
"This release adds the devicetree files for an impressive number of new
SoC variants, though as expected these are all related to others we
already support:
- The microchip sam9x7 devicetree is now added, after the device
driver and platform code has already made it in. This is likely the
last ARMv5 (!) platform to ever get added, updating the 20+ year
old at91/sam9 platform with DDR3 memory and gigabit ethernet.
- On the Apple platform, there are now devicetree files for a number
of A-series SoCs in addition to the M-series ones, these are used
primarily in phones and tablets, but are closely related to the
already supported chips.
- Samsung Exynos 8895 and Exynos 990 are more phone SoCs used in
older Samsung Galaxy phones.
- Qualcomm Snapdragon 778G (SM7325) is another phone SoC, closely
related to the Snapdragon 7c+ Gen 3 (SC7280) used in low-end
laptops.
- Rockchip RK3528 and RK3576 are new variants of their TV box and
Tablet chips, still using the older ARMv8.0 cores from
RK3328/RK3399 but with a newer process and other improvements from
the RK35xx (otherwise ARMv8.2) chips. RK3566T and RK3399-S are also
added, these are just lower-cost versions of their normal
counterparts.
- TI J742S2 is a feature-reduced version of the J784s4
industrial/automotive SoC, with fewer CPU cores.
- Sophgo SG2002 is an embedded SoC with one RISC-V (C906) and one ARM
(Cortex-A53) core, at this point support is only added for running
on the RISC-V side on the LicheeRV Nano board.
A total of 92 new .dts files describing individual machines is added,
which must be a new record. The majority of these is for the newly
added chips above, notably all the Apple phones and tablets. The other
new machines include nine industrial/embedded boards with NXP i.MX6 or
i.MX8 SoCs, eight for Rockchips RK35XX and one or two each for
Rockchips RV1109, RK3308, Allwinner A33, Tegra 234, Qualcomm
qcs9100/sc8280xp/x1e80100, TI AM625 and Starfive JH7110.
As usual there are also many newly added features in existing boards
as well as cleanups and minor bugfixes"
* tag 'soc-dt-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (718 commits)
arm64: dts: apm: Remove unused and undocumented "bus_num" property
arm: dts: spear13xx: Remove unused and undocumented "pl022,slave-tx-disable" property
arm64: dts: amd: Remove unused and undocumented "amd,zlib-support" property
arm64: dts: lg131x: Update spi clock properties
arm64: dts: seattle: Update spi clock properties
arm64: dts: rockchip: use less broad pinctrl for pcie3x1 on Radxa E25
arm64: dts: rockchip: add Radxa ROCK 5C
dt-bindings: arm: rockchip: add Radxa ROCK 5C
arm64: dts: rockchip: orangepi-5-plus: Enable GPU
arm64: dts: rockchip: enable USB3 on NanoPC-T6
arm64: dts: rockchip: adapt regulator nodenames to preferred form
arm64: dts: rockchip: Enable HDMI display for rk3588 Cool Pi GenBook
arm64: dts: rockchip: Enable HDMI display for rk3588 Cool Pi 4B
arm64: dts: rockchip: Enable HDMI0 for rk3588 Cool Pi CM5 EVB
arm64: dts: rockchip: Enable HDMI on NanoPi R6C/R6S
arm64: dts: rockchip: Enable GPU on NanoPi R6C/R6S
arm64: dts: rockchip: Enable HDMI on Hardkernel ODROID-M2
arm64: dts: rockchip: Remove non-removable flag from sdmmc on rk3576-sige5
arm64: dts: allwinner: a100: perf1: Add eMMC and MMC node
arm64: dts: allwinner: pinephone: Add mount matrix to accelerometer
...
The preferred nodename for fixed-regulators has changed to
pattern: '^regulator(-[0-9]+v[0-9]+|-[0-9a-z-]+)?$'
Fix all Rockchip DT regulator nodenames.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/0ae40493-93e9-40cd-9ca9-990ae064f21a@gmail.com
[adapted rebased on top of a number of other changes and included
neu6a-wifi + wolfvision-pf5-io-expander overlays]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Paragraph "3.4 Power up Timing Sequence" of the AzureWave-CM256SM
datasheet mentions the following about the BT_REG_ON pin, which is
connected to GPIO0_C4_d:
When this pin is low and WL_REG_ON is high,
the BT section is in reset.
Therefor set that pin to GPIO_ACTIVE_HIGH so that it can be pulled low
for a reset.
If set to GPIO_ACTIVE_LOW, the following errors are observed:
Bluetooth: hci0: command 0x0c03 tx timeout
Bluetooth: hci0: BCM: Reset failed (-110)
So fix the GPIO polarity by setting it to ACTIVE_HIGH.
This also matches what other devices with the same BT device have.
Fixes: 2b6a3f8575 ("arm64: dts: rockchip: Fix reset-gpios property on brcm BT nodes")
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lore.kernel.org/r/20241018145053.11928-2-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Property 'rockchip,system-power-controller' was deprecated in commit
961748bb15 ("dt-bindings: mfd: rk8xx: Deprecate rockchip,system-power-controller")
in the "rockchip,rk{805,808,809,817,818}.yaml" mtd bindings and its
replacement is (just) 'system-power-controller'.
Update the rk356x DT files which still used the deprecated variant.
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/20241008105450.20648-6-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
For most compatibles, the "brcm,bluetooth.yaml" binding doesn't allow
the 'reset-gpios' property, but there is a 'shutdown-gpios' property.
Page 12 of the AzureWave-CM256SM datasheet (v1.9) has the following wrt
pin 34 'BT_REG_ON' (connected to GPIO0_C4_d on the PineNote):
Used by PMU to power up or power down the internal regulators used
by the Bluetooth section. Also, when deasserted, this pin holds the
Bluetooth section in reset. This pin has an internal 200k ohm pull
down resistor that is enabled by default.
So it is safe to replace 'reset-gpios' with 'shutdown-gpios'.
Fixes: d449121e5e ("arm64: dts: rockchip: Add Pine64 PineNote board")
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lore.kernel.org/r/20241008113344.23957-5-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The "brcm,bluetooth.yaml" binding has 'device-wakeup-gpios' and
'host-wakeup-gpios' property names, not '*-wake-gpios'.
Fix the incorrect property names.
Note that the "realtek,bluetooth.yaml" binding does use the
'*-wake-gpios' property names.
Fixes: d449121e5e ("arm64: dts: rockchip: Add Pine64 PineNote board")
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lore.kernel.org/r/20241008113344.23957-4-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Similar to bf6f26deb0 ("arm64: dts: rockchip: Add dma-names to uart1
on quartz64-b") also add the dma-names property to the other rk3566
devices from Pine64 with bluetooth functionality.
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Tested-by: Riley Trautman <asonix.dev@gmail.com>
Link: https://lore.kernel.org/r/20240705163004.29678-4-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The 'regulator-init-microvolt' property is not currently supported by
any driver, it was simply carried on from downstream kernels.
The problem is also indicated by the following dtbs_check warning:
rk3588-rock-5b.dtb: pmic@0: regulators:dcdc-reg4: Unevaluated properties are not allowed ('regulator-init-microvolt' was unexpected)
Remove the invalid property from all affected DTS files.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20230707162217.675390-1-cristian.ciocaltea@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
PineNote has a USB Type-C port connected to the first USB 2.0 OTG PHY
and XHCI controller via a Willsemi WUSB3801 Type-C port controller.
Add support for it.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20220413035614.31045-3-samuel@sholland.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The PineNote is a tablet from Pine64 based on the RK3566 SoC, featuring
4G/128G of storage, a 10.3" electrophoretic display (EPD) with two-color
frontlight, both EMR and capacitive digitizers, dual-band wireless,
quad-channel digital microphones, and stereo speakers.
There are two existing variants of the board. v1.1 was contained in some
early samples, and v1.2 was sold as the "PineNote Developer Edition".
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20220130053803.43660-3-samuel@sholland.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
