This release adds the devicetree files for an impressive number of new
SoC variants, though as expected these are all related to others we
already support:
- The microchip sam9x7 devicetree is now added, after the device driver
and platform code has already made it in. This is likely the last ARMv5
(!) platform to ever get added, updating the 20+ year old at91/sam9
platform wtih DDR3 memory and gigabit ethernet.
- On the Apple platform, there are now devicetree files for a number of
A-series SoCs in addition to the M-series ones, these are used
primarily in phones and tablets, but are closely related to the
already supported chips.
- Samsung Exynos 8895 and Exynos 990 are more phone SoCs used in older
Samsung Galaxy phones.
- Qualcomm Snapdragon 778G (SM7325) is another phone SoC, closely related
to the Snapdragon 7c+ Gen 3 (SC7280) used in low-end laptops.
- Rockchip RK3528 and RK3576 are new variants of their TV box and Tablet
chips, still using the older ARMv8.0 cores from RK3328/RK3399 but
with a newer process and other improvements from the RK35xx (otherwise
ARMv8.2) chips. RK3566T and RK3399-S are also added, these are just
lower-cost versions of their normal counterparts.
- TI J742S2 is a feature-reduced version of the J784s4
industrial/automotive SoC, with fewer CPU cores.
- Sophgo SG2002 is an embedded SoC with one RISC-V (C906) and one ARM
(Cortex-A53) core, at this point support is only added for running
on the RISC-V side on the LicheeRV Nano board.
A total of 92 new .dts files describing individual machines is added,
which must be a new record. The majority of these is for the newly added
chips above, notably all the Apple phones and tablets. The other new
machines include nine industrial/embedded boards with NXP i.MX6 or i.MX8
SoCs, eight for Rockchips RK35XX and one or two each for Rockchips RV1109,
RK3308, Allwinner A33, Tegra 234, Qualcomm qcs9100/sc8280xp/x1e80100,
TI AM625 and Starfive JH7110.
As usual there are also many newlyad added features in existing boards
as well as cleanups and minor bugfixes.
-----BEGIN PGP SIGNATURE-----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=Ha1w
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC devicetree updates from Arnd Bergmann:
"This release adds the devicetree files for an impressive number of new
SoC variants, though as expected these are all related to others we
already support:
- The microchip sam9x7 devicetree is now added, after the device
driver and platform code has already made it in. This is likely the
last ARMv5 (!) platform to ever get added, updating the 20+ year
old at91/sam9 platform with DDR3 memory and gigabit ethernet.
- On the Apple platform, there are now devicetree files for a number
of A-series SoCs in addition to the M-series ones, these are used
primarily in phones and tablets, but are closely related to the
already supported chips.
- Samsung Exynos 8895 and Exynos 990 are more phone SoCs used in
older Samsung Galaxy phones.
- Qualcomm Snapdragon 778G (SM7325) is another phone SoC, closely
related to the Snapdragon 7c+ Gen 3 (SC7280) used in low-end
laptops.
- Rockchip RK3528 and RK3576 are new variants of their TV box and
Tablet chips, still using the older ARMv8.0 cores from
RK3328/RK3399 but with a newer process and other improvements from
the RK35xx (otherwise ARMv8.2) chips. RK3566T and RK3399-S are also
added, these are just lower-cost versions of their normal
counterparts.
- TI J742S2 is a feature-reduced version of the J784s4
industrial/automotive SoC, with fewer CPU cores.
- Sophgo SG2002 is an embedded SoC with one RISC-V (C906) and one ARM
(Cortex-A53) core, at this point support is only added for running
on the RISC-V side on the LicheeRV Nano board.
A total of 92 new .dts files describing individual machines is added,
which must be a new record. The majority of these is for the newly
added chips above, notably all the Apple phones and tablets. The other
new machines include nine industrial/embedded boards with NXP i.MX6 or
i.MX8 SoCs, eight for Rockchips RK35XX and one or two each for
Rockchips RV1109, RK3308, Allwinner A33, Tegra 234, Qualcomm
qcs9100/sc8280xp/x1e80100, TI AM625 and Starfive JH7110.
As usual there are also many newly added features in existing boards
as well as cleanups and minor bugfixes"
* tag 'soc-dt-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (718 commits)
arm64: dts: apm: Remove unused and undocumented "bus_num" property
arm: dts: spear13xx: Remove unused and undocumented "pl022,slave-tx-disable" property
arm64: dts: amd: Remove unused and undocumented "amd,zlib-support" property
arm64: dts: lg131x: Update spi clock properties
arm64: dts: seattle: Update spi clock properties
arm64: dts: rockchip: use less broad pinctrl for pcie3x1 on Radxa E25
arm64: dts: rockchip: add Radxa ROCK 5C
dt-bindings: arm: rockchip: add Radxa ROCK 5C
arm64: dts: rockchip: orangepi-5-plus: Enable GPU
arm64: dts: rockchip: enable USB3 on NanoPC-T6
arm64: dts: rockchip: adapt regulator nodenames to preferred form
arm64: dts: rockchip: Enable HDMI display for rk3588 Cool Pi GenBook
arm64: dts: rockchip: Enable HDMI display for rk3588 Cool Pi 4B
arm64: dts: rockchip: Enable HDMI0 for rk3588 Cool Pi CM5 EVB
arm64: dts: rockchip: Enable HDMI on NanoPi R6C/R6S
arm64: dts: rockchip: Enable GPU on NanoPi R6C/R6S
arm64: dts: rockchip: Enable HDMI on Hardkernel ODROID-M2
arm64: dts: rockchip: Remove non-removable flag from sdmmc on rk3576-sige5
arm64: dts: allwinner: a100: perf1: Add eMMC and MMC node
arm64: dts: allwinner: pinephone: Add mount matrix to accelerometer
...
The preferred nodename for fixed-regulators has changed to
pattern: '^regulator(-[0-9]+v[0-9]+|-[0-9a-z-]+)?$'
Fix all Rockchip DT regulator nodenames.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/0ae40493-93e9-40cd-9ca9-990ae064f21a@gmail.com
[adapted rebased on top of a number of other changes and included
neu6a-wifi + wolfvision-pf5-io-expander overlays]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Property 'rockchip,system-power-controller' was deprecated in commit
961748bb15 ("dt-bindings: mfd: rk8xx: Deprecate rockchip,system-power-controller")
in the "rockchip,rk{805,808,809,817,818}.yaml" mtd bindings and its
replacement is (just) 'system-power-controller'.
Update the rk3399 DT files which still used the deprecated variant.
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/20241008105450.20648-5-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The expected clock-name is different, and extclk also is deprecated
in favor of txco for clocks that are not crystals.
So fix it to match the binding.
Fixes: c72235c288 ("arm64: dts: rockchip: Add on-board WiFi/BT support for Rock960 boards")
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20241008203940.2573684-5-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Rename the Rockchip RK3399 SoC dtsi files and, consequently, adjust their
contents and the contents of the affected board dts(i) files appropriately,
to "encapsulate" the different CPU and GPU OPPs for each of the supported
RK3399 SoC variants into the respective SoC variant dtsi files.
Moving the OPPs to the SoC variant dtsi files, instead of requiring the
board dts(i) files to include both the SoC variant dtsi file and the right
OPP variant dtsi file, reduces the possibility for mismatched inclusion and
improves the overall hierarchical representation of data.
These changes follow the approach used for the Rockchip RK3588 SoC variants,
which was introduced and described further in commit def88eb4d8 ("arm64:
dts: rockchip: Prepare RK3588 SoC dtsi files for per-variant OPPs"). Please
see that commit for a more detailed explanation.
No functional changes are introduced, which was validated by decompiling and
comparing all affected dtb files before and after these changes. In more
detail, all decompiled dtb files remain exactly the same, except the files
list below, which results from all of them stemming from the same base board
dtsi file (rk3399-rock-pi-4.dtsi), while all of them include one of the three
different RK3399 SoC variant dtsi files by themselves:
- rk3399-rock-4se.dtb
- rk3399-rock-pi-4a.dtb
- rk3399-rock-pi-4a-plus.dtb
- rk3399-rock-pi-4b.dtb
- rk3399-rock-pi-4b-plus.dtb
- rk3399-rock-pi-4c.dtb
When compared with the decompiled original dtb files, these dtb files have
some of their blocks shuffled around a bit and some of their phandles have
different values, as a result of the changes to the order in which the
building blocks from the parent dtsi files are included into them, but they
still effectively remain the same as the originals.
The only exception to the "include only a SoC variant dtsi" is found in
rk3399-evb.dts, which includes rk3399-base.dtsi instead of rk3399.dtsi.
This is intentional, because this board dts file doesn't enable the TSADC,
so including rk3399.dtsi would enable the SoC to go into higher OPPs with
no thermal throttling in place. Let's hope that people interested in this
board will fix this in the future.
As a side note, due to the nature of introduced changes, this commit is best
viewed using the --break-rewrites option for git-log(1).
Related-to: def88eb4d8 ("arm64: dts: rockchip: Prepare RK3588 SoC dtsi files for per-variant OPPs")
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/9417b5c5b64f9aceea64530a85a536169a3e7466.1721532747.git.dsimic@manjaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add the avdd-0v9-supply and avdd-1v8-supply regulators to
hdmi node for Rock960 to silence the following dmesg warning.
[ 6.582782] dwhdmi-rockchip ff940000.hdmi: supply avdd-0v9 not found, using dummy regulator
[ 6.583094] dwhdmi-rockchip ff940000.hdmi: supply avdd-1v8 not found, using dummy regulator
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Link: https://lore.kernel.org/r/20221102143242.1126229-1-pbrobinson@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
GPIO_ACTIVE_x flags are not correct in the context of interrupt flags.
These are simple defines so they could be used in DTS but they will not
have the same meaning:
1. GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE
2. GPIO_ACTIVE_LOW = 1 = IRQ_TYPE_EDGE_RISING
Correct the interrupt flags, assuming the author of the code wanted same
logical behavior behind the name "ACTIVE_xxx", this is:
ACTIVE_HIGH => IRQ_TYPE_LEVEL_HIGH
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200917185211.5483-2-krzk@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
As suggested by Arnd Bergmann, the newly added mmc aliases
should be board specific, so move them from the general dtsi
to the individual boards.
Suggested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Link: https://lore.kernel.org/r/20210324122235.1059292-7-heiko@sntech.de
A test with the command below gives for example this error:
arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dt.yaml:
tsadc: tsadc-otp-gpio:
{'phandle': [[90]], 'rockchip,pins': [[0, 6, 0, 123]]}
is not of type 'array'
'gpio' is a sort of reserved nodename and should not be used
for pinctrl in combination with 'rockchip,pins', so change
nodes that end with 'gpio' to end with 'pin' or 'pins'.
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/
dtschema/schemas/gpio/gpio.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200524160636.16547-2-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
A test with the command below does not detect all errors
in combination with 'additionalProperties: false' and
allOf:
- $ref: "synopsys-dw-mshc-common.yaml#"
allOf:
- $ref: "mmc-controller.yaml#"
'additionalProperties' applies to all properties that are not
accounted-for by 'properties' or 'patternProperties' in
the immediate schema.
First when we combine rockchip-dw-mshc.yaml,
synopsys-dw-mshc-common.yaml and mmc-controller.yaml it gives
for example this error:
arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dt.yaml: mmc@fe320000:
'clock-freq-min-max' does not match any of the regexes:
'^.*@[0-9]+$', '^clk-phase-(legacy|sd-hs|mmc-(hs|hs[24]00|ddr52)|
uhs-(sdr(12|25|50|104)|ddr50))$', 'pinctrl-[0-9]+'
'clock-freq-min-max' is deprecated, so replace it by 'max-frequency'.
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200307134841.13803-5-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
12V DCIN regulator is root source supply for the rest of regulators
in Rock960 power diagram.
Add support for it and attach same to supply vcc5v0_sys.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Akash Gajjar <akash@openedev.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
It is always better practice to follow regulator naming conventions
as per the schematics for future references.
So, rename vcc_sys into vcc5v0_sys as per rk3399 power diagram of
rock960 schematics.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Akash Gajjar <akash@openedev.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Enable the thermal sensor. This device also provides
temperature shutdown protection. The shutdown value is
set at 110C, as tested by the vendor.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This commit enable the hdmi-sound and i2s2 devices needed to have
audio over HDMI on both rock960 and the related ficus board.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
When the performance governor is set as default, the rock960 hangs
around one minute after booting, whatever the activity is (idle, key
pressed, loaded, ...).
Based on the commit log found at https://patchwork.kernel.org/patch/10092377/
"vdd_log has no consumer and therefore will not be set to a specific
voltage. Still the PWM output pin gets configured and thence the vdd_log
output voltage will changed from it's default. Depending on the idle
state of the PWM this will slightly over or undervoltage the logic supply
of the RK3399 and cause instability with GbE (undervoltage) and PCIe
(overvoltage). Since the default value set by a voltage divider is the
correct supply voltage and we don't need to change it during runtime we
remove the rail from the devicetree completely so the PWM pin will not
be configured."
After removing the vdd-log from the rock960's specific DT, the board
does no longer hang and shows a stable behavior.
Apply the same change for the rock960 by removing the vdd-log from the
DT.
Fixes: 874846f1fc ("arm64: dts: rockchip: add 96boards RK3399 Ficus board")
Cc: stable@vger.kernel.org
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
For proper working of SD cards, let's add the Card Detect GPIO property
to the common devicetree for Rock960 family boards.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Since the same family members of Rock960 boards (Rock960 and Ficus)
share the same configuration, split out the common nodes into a common
dtsi file for reducing code duplication. The board specific nodes for
Ficus boards are then placed in corresponding board DTS file.
Below are some of the key differences between both Rock960 and Ficus
boards:
1. Different host enable GPIO for USB
2. Different power and reset GPIO for PCI-E
3. No Ethernet port on Rock960
Only the properties which differ between both boards are placed in the
board specific dts and the reset of the nodes are placed in common dtsi
file.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
