The #address-cells and #size-cells properties are not useful on the DSI
controller node; they are only useful/required on ports and panel(s).
So remove them from the controller node and add them where actually
needed on the various px30 based boards, which includes rk3326.
This fixes the following DTB validation warnings:
unnecessary #address-cells/#size-cells without "ranges",
"dma-ranges" or child "reg" property
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lore.kernel.org/r/20250709132323.128757-2-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The preferred nodename for fixed-regulators has changed to
pattern: '^regulator(-[0-9]+v[0-9]+|-[0-9a-z-]+)?$'
Fix all Rockchip DT regulator nodenames.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/0ae40493-93e9-40cd-9ca9-990ae064f21a@gmail.com
[adapted rebased on top of a number of other changes and included
neu6a-wifi + wolfvision-pf5-io-expander overlays]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The Anbernic and Odroid Go have different panels and take differently
named supplies, so move all the supplies to DTS defining actual panel to
fix warnings like:
rk3326-odroid-go3.dtb: panel@0: 'IOVCC-supply' is a required property
rk3326-odroid-go3.dtb: panel@0: 'iovcc-supply', 'vdd-supply' do not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230326204520.80859-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Update the blue LED to be controlled via pwm to enable control of LED
brightness. Add red LED as a GPIO controlled LED. The documentation
stated "label" was depreciated so function and color was used instead.
The LED names (led-2 and led-3) are given because that is what they
are numbered on the board itself; LED 1 is wired directly into an
always on regulator and is not controllable. LED 2 is labelled "alive"
on the board and documentation recommends we set the function as
status over other miscellaneous functions. LED 3 is labelled "chg" on
the board.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20221201203655.1245-5-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The Odroid Go Advance devicetree tries to set the rate for the cpll
clock to 17MHz, which is not a supported rate. This fails, and triggers
the error of "clk: couldn't set cpll clk rate to 17000000 (-22),
current rate: 17000000" in the dmesg log. Remove the incorrect rate.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20221201203655.1245-3-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Change the audio card name for the Odroid Go Advance series to
rk817_int. This matches the audio card name of the Anbernic RG353V.
This is done to provide a consistent card name so that a single ALSA
UCM file can be used for all (identical) implementations of this codec
and configuration combo. The rk817_int configuration is for when the
internal speaker amplifier of the rk817 is used. The other Anbernic
devices have the name as rk817_ext for when an external speaker
amplifier is used.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20221201203655.1245-2-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
To support more devices that are clones of this device or minor
revisions without duplication move most of go2's dts into a dtsi file.
Signed-off-by: Maya Matuszczyk <maccraft123mc@gmail.com>
Link: https://lore.kernel.org/r/20221117215954.4114202-2-maccraft123mc@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
