Add DT entries for the sm8650 iris decoder.
Since the firmware is required to be signed, only enable
on Qualcomm development boards where the firmware is
available.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250613-topic-sm8x50-upstream-iris-8650-dt-v4-1-35ea7952f2d2@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
After a change enabling display clock controller for all Qualcomm SM8650
powered board by default there is no more need to set a status property
of dispcc on SM8650-HDK board.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240924100602.3813725-8-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Change the HW model in sm8650-hdk.dts to a one closer to reality - where
the WLAN and Bluetooth modules of the WCN7850 are powered by the PMU
inside the package.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20240716-topic-sm8x50-upstream-use-pmu-to-power-up-bt-v1-1-67b3755edf6a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add appropriate mappings of Soundwire ports of WSA8845 speaker
to correctly map the Speaker ports to the WSA macro ports.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240627-topic-sm8650-upstream-was-port-mapping-v1-1-4700bcc2489a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
When triggering I2S SE DMA transfers on the 6th Serial Element, we get
some timeouts and finally a fatal SMMU crash because the I2C6 lines
are shared with the secure firmware in order to handle the SMB1396
charger from the secure side.
In order to make thing work flawlessly we need to allow more SIDs
while running our SE DMA transfers, thus add the 0x3 mark to allow
the 0xa0 SID to trigger while we trigger an 0xa3 SID from Linux.
This crash doesn't happen on the QRD platform since the SE6 is
configured differently, with FIFO mode disabled, thus GPI DMA
is used and we cannot exercise SE DMA on this interface.
The crash only happens when large tranfers occurs (>32 bytes) since
the driver is designed to use the SE DMA in this case, and there's
no way to mark the SE DMA as disabled or mark the GPI DMA as
preferred since the FIFO/SE DMA will be used is FIFO is not disabled.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Fixes: 0106144102 ("arm64: dts: qcom: sm8650: add support for the SM8650-HDK board")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240605-topic-sm8650-upstream-hdk-iommu-fix-v1-1-9fd7233725fa@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The commit 65931e59e0 ("arm64: dts: qcom: sm8650: move USB graph to
the SoC dtsi") and commit fbb22a1822 ("arm64: dts: qcom: sm8650: move
PHY's orientation-switch to SoC dtsi") have moved some of the properties
from the board DT files to the sm8650.dtsi. As the patch for sm8650 HDK
predates those commits, it still had those properties inside.
Drop these duplicate proerties from the sm8650-hdk.dts.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240530-sm8650-hdk-redundant-v1-1-c39c2ae65f3b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
