Reboot modes were originally managed by PMIC pon driver on mobile/IoT
platforms, such as sm8150,sm8250,qdu1000... But recently, QCS615 is
going to adopt PSCI to manage linux reboot modes, which involves firm
wares to co-work with. In this case, reboot-modes should be removed
from pon dts node to avoid conflicting. This implies that reboot modes
go with devices rather than PMICs as well.
Signed-off-by: Tingguo Cheng <quic_tingguoc@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241202-adds-spmi-pmic-peripherals-for-qcs615-v6-2-bdd306b4940d@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Interrupt flags 0x2008 looks like some downstream copy-paste, because
generic GPIOLIB code, used by Qualcomm pin controller drivers, ignores
flags outside of IRQ_TYPE_SENSE_MASK. Probably the intention was to
pass just 0x8, so IRQ_TYPE_LEVEL_LOW.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240605160032.150587-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The GENI UART driver requires one specifies a numeric alias. Do so and
set the stdout-path to route the console to the debug uart in the microSD
slot by default.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230912-topic-edoconsole-v1-1-b392ea67e539@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Set up the corresponding GPIOs properly and add the leftover hardware
buttons to mark this piece of the puzzle complete.
Fixes: 46e14907c7 ("arm64: dts: qcom: sm8250-edo: Add hardware keys")
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230614-topic-edo_pinsgpiopmic-v2-4-6f90bba54c53@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Xperia 1 II / PRO use the Dialog SLG51000 PMIC for powering some camera
sensors. Add the required nodes to support it and remove its remnants
from -edo.dtsi, as it's absent on 5 II.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230614-topic-edo_pinsgpiopmic-v2-3-6f90bba54c53@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
There is no 'msg-size' property in ramoops, so assume intention was for
'pmsg-size':
sm8250-sony-xperia-edo-pdx206.dtb: ramoops@ffc00000: Unevaluated properties are not allowed ('msg-size' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230618114442.140185-7-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The framebuffer configuration for edo pdx203, written in edo dtsi (which
is overwritten in pdx206 dts for its smaller panel) has to use a
1096x2560 configuration as this is what the panel (and framebuffer area)
has been initialized to. Downstream userspace also has access to (and
uses) this 2.5k mode by default, and only switches the panel to 4k when
requested.
This is similar to commit be8de06dc3 ("arm64: dts: qcom:
sm8150-kumano: Panel framebuffer is 2.5k instead of 4k") which fixed the
same for the previous generation Sony platform.
Fixes: 69cdb97ef6 ("arm64: dts: qcom: sm8250: Add support for SONY Xperia 1 II / 5 II (Edo platform)")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230606211418.587676-1-marijn.suijten@somainline.org
Pin configuration property "input-enable" was used with the intention to
disable the output, but this is done by default by Linux drivers. Since
patch ("dt-bindings: pinctrl: qcom: tlmm should use output-disable, not
input-enable") the property is not accepted anymore.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230407175807.124394-9-krzysztof.kozlowski@linaro.org
gpio-keys,wakeup is a deprecated property:
sm8250-sony-xperia-edo-pdx206.dtb: gpio-keys: key-vol-down: Unevaluated properties are not allowed ('gpio-key,wakeup' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230304123358.34274-7-krzysztof.kozlowski@linaro.org
Device node names should be generic and bindings expect certain pattern
for RPMh regulator nodes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230127114347.235963-9-krzysztof.kozlowski@linaro.org
As much as it hurts me, there is no FM radio chips on these devices.
It seems to be present on Japanese models, but these are not available
globally and differ in a few more ways anyway (such as a super high-tech
NFC chip).
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221213132517.203609-1-konrad.dybcio@linaro.org
Node names should be generic so use consistently speaker-amp for CS35L41
speaker amplifier.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221224154255.43499-5-krzysztof.kozlowski@linaro.org
There is no "no-emmc" property, so intention for SD/SDIO only nodes was
to use "no-mmc":
qcom/sm8250-sony-xperia-edo-pdx206.dtb: mmc@8804000: Unevaluated properties are not allowed ('no-emmc' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221204094438.73288-6-krzysztof.kozlowski@linaro.org
When recently adding the missing 'regulator-allowed-modes' properties it
appears that the binding example with its four-spaces indentation
(corresponding to a single tab, which is still to little) was copied
verbatim.
Drop the unnecessary first line break after 'regulator-allowed-modes'
properties and indent the single remaining continuation line properly.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221116102054.4673-3-johan+linaro@kernel.org
This board uses RPMH, specifies "regulator-allow-set-load" for LDOs,
but doesn't specify any modes with "regulator-allowed-modes".
Prior to commit efb0cb50c4 ("regulator: qcom-rpmh: Implement
get_optimum_mode(), not set_load()") the above meant that we were able
to set either LPM or HPM mode. After that commit (and fixes [1]) we'll
be stuck at the initial mode. Discussion of this has resulted in the
decision that the old dts files were wrong and should be fixed to
fully restore old functionality.
Let's re-enable the old functionality by fixing the dts.
[1] https://lore.kernel.org/r/20220824142229.RFT.v2.2.I6f77860e5cd98bf5c67208fa9edda4a08847c304@changeid
Fixes: 69cdb97ef6 ("arm64: dts: qcom: sm8250: Add support for SONY Xperia 1 II / 5 II (Edo platform)")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220829094903.v2.5.Ie446d5183d8b1e9ec4e32228ca300e604e3315eb@changeid
DT schema expects TLMM pin configuration nodes to be named with
'-state' suffix and their optional children with '-pins' suffix.
Drop also unneeded split between mux and config.
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220930192954.242546-2-krzysztof.kozlowski@linaro.org
Enabling the hardware thankfully comes down to a simple status = "okay".
We assume that the firmware is provided by the Linux distribution, as it's
signed and needs to come from the stock Android.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210616122708.144770-4-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Volume Down, GAssist (pdx206 only) and camera keys live on PMIC pins,
with the latter kind being broken for now.. Add these and PON-connected
Volume Up & PWR.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210616122708.144770-1-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
When bringing the SDC pins back to edo.dtsi I managed to define
and overwrite pinctrl-1 instead of defining pinctrl-0 and 1. Fix it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210616161536.206044-1-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add support for SONY Xperia 1 II and 5 II smartphones (read one/five mark two).
They are based on the Qualcomm SM8250 chipset and both feature 5G modems. There
also exists a third Edo board, namely the Xperia PRO (PDX204), but it's $2500
and no developers have obtained it so far (to my knowledge).
The devices are affected by a scary UFS behaviour where sending a certain UFS
command (which is worked around on downstream) renders the device unbootable,
by effectively erasing the bootloader. Therefore UFS AND UFSPHY are strictly
disabled for now.
Downstream workaround:
2e7a9ee1c9
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210616002321.74155-4-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
