The ID 434 is for SM6350 while 459 is for SM7225. Fairphone 4 is only
SM7225, so drop the unused 434 entry.
Fixes: 4cbea66876 ("arm64: dts: qcom: sm7225: Add device tree for Fairphone 4")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241220-fp4-msm-id-v1-1-2b75af02032a@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Configure the thermals for the PA_THERM1, MSM_THERM, PA_THERM0,
RFC_CAM_THERM, CAM_FLASH_THERM and QUIET_THERM thermistors connected to
PM6150L.
Due to hardware constraints we can only register 4 zones with
pm6150l_adc_tm, the other 2 we can register via generic-adc-thermal.
The trip points can really only be considered as placeholders, more
configuration with cooling etc. can be added later.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20240705-fp4-thermals-v2-2-a4870a8d084f@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Configure the thermals for the XO_THERM thermistor connected to the
PMK8003 (which is called PMK8350 in software).
The ADC configuration for PMK8350_ADC7_AMUX_THM1_100K_PU has already
been added in the past.
The trip points can really only be considered as placeholders, more
configuration with cooling etc. can be added later.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20240705-fp4-thermals-v2-1-a4870a8d084f@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Without explicitly specifying names for the regulators they are named
based on the DeviceTree node name. This results in multiple regulators
with the same name, making debug prints and regulator_summary impossible
to reason about.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240627-fp4-regulator-name-v1-1-66931111a006@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
PM8008 regulators are used for the cameras found on FP4. Configure the
chip and its voltages.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240621-fp4-fp5-pm8008-v1-1-dbedcd6f00f1@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Configure the Type-C and VBUS regulator on PM7250B and wire it up to the
USB PHY, so that USB role and orientation switching works.
For now USB Power Delivery properties are skipped / disabled, so that
the (presumably) bootloader-configured charger doesn't get messed with
and we can charge the phone with at least some amount of power.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240530-fp4-tcpm-v3-3-612d4bbd5e09@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the description for the display panel found on this phone.
Unfortunately the LCDB module on PM6150L isn't yet supported upstream so
we need to use a dummy regulator-fixed in the meantime.
And with this done we can also enable the GPU and set the zap shader
firmware path.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20240216-fp4-panel-v3-4-a556e4b79640@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Specify the file name for the squashed/non-split firmware with the .mbn
extension instead of the split .mdt. The kernel can load both but the
squashed version is preferred in dts nowadays.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240110-fp4-mbn-v1-1-45e7e33b1834@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Like other Qualcomm PMICs the PM7250B can be used on different addresses
on the SPMI bus. Use similar defines like the PMK8350 to make this
possible but skip the ifndef based on maintainer feedback.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230919-fp5-initial-v2-3-14bb7cedadf5@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This reverts commit 413821b777 because it
was never reviewed, was buggy (report from kernel test robot:
https://lore.kernel.org/all/202204090333.QZXMI2tu-lkp@intel.com/) and
used undocumented, broken bindings. Half of the properties in this
device are questioned, thus adding DTS node causes only errors and does
not make the device usable without the bindings and driver part:
sm7225-fairphone-fp4.dtb: haptics@5a: failed to match any schema with compatible: ['awinic,aw8695']
sm7225-fairphone-fp4.dtb: haptics@5a: awinic,tset: b'\x12' is not of type 'object', 'array', 'boolean', 'null'
sm7225-fairphone-fp4.dtb: haptics@5a: awinic,r-spare: b'h' is not of type 'object', 'array', 'boolean', 'null'
Since bindings were abandoned (4 months since review), revert the commit
to avoid false sense of supporting something which is not supported.
Cc: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20230827122842.63741-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Since we have those defines available in a header, let's use them
everywhere where qcom,vmid property is used.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20230818-qcom-vmid-defines-v1-1-45b610c96b13@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The device has a WCN3988 chip for WiFi and Bluetooth. Configure the
Bluetooth node and enable the UART it is connected to, plus the
necessary pinctrl that has been borrowed with comments from
sc7280-idp.dtsi.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230421-fp4-bluetooth-v2-4-3de840d5483e@fairphone.com
Enable all i2c busses where something is connected on this phone. Add
comments as placeholders for which components are still missing.
Also enable gpi_dma and the other qupv3 for that.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230213-fp4-more-i2c-v2-2-1c459c572f80@fairphone.com
Currently the dts contains a mix of status-as-first-property (old qcom
style) and status-as-last-property (new style).
Move all status properties down to the bottom once and for all so that
the style is consistent between different nodes.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230213-fp4-more-i2c-v2-1-1c459c572f80@fairphone.com
Device node names should be generic and bindings expect certain pattern
for RPMh regulator nodes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230127114347.235963-7-krzysztof.kozlowski@linaro.org
The PMK8350 (which is actually a PMK8003) is used for the RTC and has
ADC for thermals.
Since the adc_tm compatible used in PMK8350 is not yet supported, skip
configuring that and the associated thermal zone for now.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221207084045.270172-1-luca.weiss@fairphone.com
When recently adding the missing 'regulator-allowed-modes' properties it
appears that the binding example with its four-spaces indentation
(corresponding to a single tab, which is still to little) was copied
verbatim.
Drop the unnecessary first line break after 'regulator-allowed-modes'
properties and indent the single remaining continuation line properly.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221116102054.4673-3-johan+linaro@kernel.org
Fairphone 4 uses sdhc_2 for the SD card, configure the pins for it and
enable it.
The regulators which are exclusively used for SDHCI have their maximum
voltage decreased to what downstream sets on the consumer side, like on
many other platforms and allowed to set the load.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221110151507.53650-1-luca.weiss@fairphone.com
The PM7250B is primarily used for charger and fuel gauge on Fairphone 4
but also has some thermal zones that we can configure already.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220902111055.106814-3-luca.weiss@fairphone.com
DT schema expects PMIC GPIO pin configuration nodes to be named with
'-state' suffix. Optional children should be either 'pinconf' or
followed with '-pins' suffix. This fixes dtbs_check warnings like:
sdm845-xiaomi-beryllium.dtb: gpios@c000: 'vol-up-active' does not match any of the regexes: '-state$', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220507194913.261121-6-krzysztof.kozlowski@linaro.org
Enable the remoteprocs found on the SoC and add a qcom,rmtfs-mem node.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211213082208.21492-9-luca.weiss@fairphone.com
Add the "chassis-type" to msm8916-samsung-serranove and
sm7225-fairphone-fp4 that were posted before the patch that added the
chassis-type to existing device trees, but merged after it.
Also, looks like sdm636-sony-xperia-ganges-mermaid was missing in
commit eaa744b1c1 ("arm64: dts: qcom: add 'chassis-type' property")
so add it there as well.
Cc: Luca Weiss <luca@z3ntu.xyz>
Cc: Arnaud Ferraris <arnaud.ferraris@collabora.com>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Arnaud Ferraris <arnaud.ferraris@collabora.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211025102224.23746-1-stephan@gerhold.net
Add device tree for the Fairphone 4 smartphone which is based on
Snapdragon 750G (sm7225) which is basically sm6350.
Currently supported are UART, physical buttons (power & volume), screen
(based on simple-framebuffer set up by the bootloader), regulators and
USB.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211007212444.328034-12-luca@z3ntu.xyz
