Since we have those defines available in a header, let's use them
everywhere where qcom,vmid property is used.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20230818-qcom-vmid-defines-v1-1-45b610c96b13@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Device node names should be generic and bindings expect certain pattern
for RPMh regulator nodes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230127114347.235963-6-krzysztof.kozlowski@linaro.org
Depending on the platform, either the modem or the AP must load GSI
firmware for IPA before it can be used. To date, this has been
indicated by the presence or absence of a "modem-init" property.
That mechanism has been deprecated. Instead, we indicate how GSI
firmware should be loaded by the value of the "qcom,gsi-loader"
property.
Update all arm64 platforms that use IPA to use the "qcom,gsi-loader"
property to specify how the GSI firmware is loaded.
Update the affected nodes so the status property is last.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
[bjorn: Moved sc7280 change herobrine-lte-sku]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221231002716.2367375-3-elder@linaro.org
DT schema expects TLMM pin configuration nodes to be named with
'-state' suffix and their optional children with '-pins' suffix.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221222151319.122398-3-krzysztof.kozlowski@linaro.org
resin node declaration was moved to pm8998.dtsi file (in disabled state).
MSM8998 and SDM845 boards defining resin node did not previously have
status="okay" and ended up disabled.
Re-enable it by using resin node link from pm8998.dtsi with status="okay".
Fixes: f86ae6f23a ("arm64: dts: qcom: sagit: add initial device tree for sagit")
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reported-by: Marijn Suijten <marijn.suijten@somainline.org>
Link: https://lore.kernel.org/linux-arm-msm/20221222115922.jlachctn4lxopp7a@SoMainline.org/
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221228115243.201038-1-dsankouski@gmail.com
The gpio node in PMIC dts'es define access to multiple GPIOs. Most Qcom
PMICs were already using the plural _gpios label to point to this node,
but a few PMICs were left behind including the recently-pulled
pm(i)8950.
Rename it from *_gpio to *_gpios for pm6125, pm6150(l), pm8005,
pm(i)8950, and pm(i)8998.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221209220450.1793421-1-marijn.suijten@somainline.org
DT schema expects TLMM pin configuration nodes to be named with
'-state' suffix and their optional children with '-pins' suffix.
qcom/sdm845-lg-judyln.dtb: gpios@c000: 'vol-up-active-pins' does not match any of the regexes: '-state$', 'pinctrl-[0-9]+'
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220930192954.242546-9-krzysztof.kozlowski@linaro.org
Adds initial support for the LG G7 (judyln) and
LG V35 (judyp) phones.
Currently supported features:
- Display via simplefb (panel driver is WIP)
- Keys
- Micro SD card
- Modem (not tested much, but initialises)
- UFS (crashes during intensive workloads, may need quirks)
- USB in peripheral mode
Notable missing features:
- Enabling WiFi causes a remoteproc crash, so it's disabled here.
Needs to be debugged - ideas welcome!
Signed-off-by: Anton Bambura <jenneron@protonmail.com>
Signed-off-by: Stefan Hansson <newbie13xd@gmail.com>
Tested-by: Gregari Ivanov <llamashere@posteo.de>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220626164536.16011-2-newbie13xd@gmail.com
