The property qcom,ath10k-calibration-variant was deprecated in favor of
recently introduced generic qcom,calibration-variant, common to all
Qualcomm Atheros WiFi bindings.
Change will affect out of tree users, like other projects, of this DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250225-dts-qcom-wifi-calibration-v1-7-347e9c72dcfc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
L10A, being a fixed regulator, should have min_voltage = max_voltage,
otherwise fixed rulator fails to probe. Fix the max_voltage range to be
equal to minimum.
Fixes: 4edbcf264f ("arm64: dts: qcom: sda660-ifc6560: document missing USB PHY supplies")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konradybcio@kernel.org>
Link: https://lore.kernel.org/r/20240907-sdm660-wifi-v1-4-e316055142f8@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable Adreno GPU on the Inforce IFC6560 SBC. It requires the Zap shader
binary that was provided by the vendor.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konradybcio@kernel.org>
Link: https://lore.kernel.org/r/20240907-sdm660-wifi-v1-3-e316055142f8@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On the IFC6560 one of the USB PHY supplies is the L10A power supply.
However this regulator also supplies VDDA_APC1_CS, VDD_PLL2 and VDD_P11
consumers. Touching the supply causes the board to be reset. Document
the supply as a fixed always-on regulator.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240501-qcom-phy-fixes-v1-12-f1fd15c33fb3@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The Inforce IFC6560 board actually has USB SS lines routed to the USB-C
connector. Enable USB 3.0 PHY and SS mode for the USB3 host.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240116-sdm660-usb3-support-v1-4-2fbd683aea77@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Define USB3 QMP PHY presend on the SDM630 / SDM660 platforms. Enable it by
default in the USB3 host, but (for compatibility), force USB 2.0 mode
for all defined boards. The boards should opt-in to enable USB 3.0
support.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240116-sdm660-usb3-support-v1-3-2fbd683aea77@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Currently in board files MDSS and DSI nodes stay apart, because labels
for DSI nodes do not have the mdss_ prefix. It was found that grouping
all display-related notes is more useful.
To keep all display-related nodes close in the board files, change DSI
node labels from dsi_* to mdss_dsi_*.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230531011623.3808538-11-dmitry.baryshkov@linaro.org
gpio-key bindings expect children to be named with generic prefix:
sda660-inforce-ifc6560.dtb: gpio-keys: 'volup' does not match any of the regexes: ...
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230312183622.460488-1-krzysztof.kozlowski@linaro.org
There is no "no-emmc" property, so intention for SD/SDIO only nodes was
to use "no-mmc":
qcom/sda660-inforce-ifc6560.dtb: mmc@c084000: Unevaluated properties are not allowed ('no-emmc' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221204094438.73288-4-krzysztof.kozlowski@linaro.org
DT schema expects TLMM pin configuration nodes to be named with
'-state' suffix and their optional children with '-pins' suffix. All
nodes for GPIOs must also define the function property.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221011190231.76784-3-krzysztof.kozlowski@linaro.org
Correct firmware paths for the Inforce IFC6560 to include the SoC name.
Do not include the platform name, since the board uses test-signed
firmware.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220919190037.2122284-4-dmitry.baryshkov@linaro.org
The IFC6560 is a board from Inforce Computing, built around the SDA660
SoC. This patch describes core clocks, some regulators from the two
PMICs, debug uart, storage, bluetooth and audio DSP remoteproc.
The regulator settings are inherited from prior work by Konrad Dybcio
and AngeloGioacchino Del Regno.
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Co-developed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220521202708.1509308-12-dmitry.baryshkov@linaro.org
