DTS coding style expects labels to be lowercase. No functional impact.
Verified with comparing decompiled DTB (dtx_diff and fdtdump+diff).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241022-dts-qcom-label-v3-4-0505bc7d2c56@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
At a high-level, detachable Trogdors (sometimes known as Strongbads)
don't have a cros_ec keyboard, while all clamshell Trogdors (only known
as Trogdors) always have a cros_ec keyboard. Looking closer though, all
clamshells have a USB type-A connector and a hardwired USB camera. And
all detachables replace the USB camera with a MIPI based one and swap
the USB type-a connector for the detachable keyboard pogo pins.
Split the detachable and clamshell bits into different files so we can
describe these differences in one place instead of in each board that
includes sc7180-trogdor.dtsi. For now this is just the keyboard part,
but eventually this will include the type-a port and the pogo pins.
Cc: cros-qcom-dts-watchers@chromium.org
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: Pin-yen Lin <treapking@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240604214233.3551692-4-swboyd@chromium.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
It was asserted that the "/delete-property/ VBAT-supply;" that we
needed to do in the rt5682s dts fragment was ugly. Let's change up all
the trogdor device trees to make it explicit which version of "rt5682"
we have and avoid the need for the "delete-property".
As a side effect, this nicely gets rid of the need for a delete-node
in coachz, which doesn't use "rt5682" at all.
A few notes:
- This doesn't get rid of every "/delete-node/" in trogdor, just the
one that was used for rt5682s.
- Though we no longer have any "/delete-node/", we do still override
the "model" in the "sound" node in one case (in pompom) since that
uses the "2mic" sound setup.
This is validated to produce the same result (other than a few
properties being reordered) when taking the dtbs generated by the
kernel build and then doing:
for dtb in *trogdor*.dtb; do
dtc -I dtb -O dts $dtb -o out/$dtb.dts;
done
Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com>
Link: https://lore.kernel.org/r/20230816112143.2.I29a5a330b6994afca81871f74bbacaf55b155937@changeid
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Let's provide the proper link from the touchscreen to the panel on
trogdor devices where the touchscreen support it. This allows the OS
to power sequence the touchscreen more properly.
For the most part, this is just expected to marginally improve power
consumption while the screen is off. However, in at least one trogdor
model (wormdingler) it's suspected that this will fix some behavorial
corner cases when the panel power cycles (like for a modeset) without
the touchscreen power cycling.
NOTE: some trogdor variants use touchscreens that don't (yet) support
linking the touchscreen and the panel. Those variants are left alone.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Benjamin Tissoires <bentiss@kernel.org>
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Link: https://lore.kernel.org/r/20230727101636.v4.11.Ia06c340e3482563e6bfd3106ecd0d3139f173ca4@changeid
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
DT schema expects TLMM pin configuration nodes to be named with
'-state' suffix and their optional children with '-pins' suffix.
Merge subnodes named 'pinconf' and 'pinmux' into one entry, add function
where missing (required by bindings for GPIOs) and reorganize overriding
pins by boards.
Split the SPI and UART configuration into separate nodes
1. SPI (MOSI, MISO, SCLK), SPI chip-select, SPI chip-select via GPIO,
2. UART per each pin: TX, RX and optional CTS/RTS.
This allows each board to customize them easily without adding any new
nodes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221020225135.31750-4-krzysztof.kozlowski@linaro.org
Add missing space or remove redundant one before opening {.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220919163333.129989-1-krzysztof.kozlowski@linaro.org
Trogdor devices that have a detachable keyboard still have a
non-detachable keyboard input device present because we include the
cros-ec-keyboard.dtsi snippet in the top-level sc7180-trogdor.dtsi file
that every variant board includes. We do this because the
keyboard-controller node also provides some buttons like the power
button and volume buttons. Unfortunately, this means we register a
keyboard input device that doesn't do anything on boards with a
detachable keyboard.
Change the node's compatible on detachables to the newly introduced
"google,cros-ec-keyb-switches" compatible to indicate that there are
only switches and no keyboard to register. Similarly, move the keyboard
include that defines the keyboard-controller node out of
sc7180-trogdor.dtsi to boards that actually have a keyboard so that the
matrix properties are not defined on boards with the switches
compatible. Future boards can either use the include approach or the
node definition approach to describe a keyboard with possible switches
or just some switches.
Cc: Benson Leung <bleung@chromium.org>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Hsin-Yi Wang <hsinyi@chromium.org>
Cc: "Joseph S. Barrera III" <joebar@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220627212802.3593012-1-swboyd@chromium.org
The SoC is always present on sc7180-trogdor.dtsi and thus we should
include it in the "generic" dtsi file for trogdor. Previously we had
removed it from there because we had to do the spi6/spi0 swizzle, so
each trogdor variant board had to include sc7180.dtsi and then
sc7180-trogdor.dtsi so that the latter dtsi file could modify the right
spi bus for EC and H1 properties that are common to all trogdor boards.
Now that we're done with that we can replace sc7180.dtsi includes with
sc7180-trogdor.dtsi and include sc7180.dtsi in sc7180-trogdor.dtsi as
was originally intended. We still need to include sc7180-trogdor.dtsi
before the bridge dtsi files though because those rely on the panel
label.
Cc: "Joseph S. Barrera III" <joebar@chromium.org>
Cc: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220427020339.360855-4-swboyd@chromium.org
We had to do this spi0/spi6 flip-flop on trogdor-r0 because the spi
buses got swizzled between r0 and r1. The swizzle stopped after r1, but
we kept this around to support either hardware possibility and to keep
trogdor-r0 working.
trogdor-r0 isn't supported upstream, so this swizzle is not doing
anything besides making a pattern that others tryt to copy for the EC and
H1 nodes. Let's remove it and simplify the dts files.
Cc: "Joseph S. Barrera III" <joebar@chromium.org>
Cc: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220427020339.360855-3-swboyd@chromium.org
Trogdor boards with a detachable keyboard don't have a trackpad over
i2c. Instead the trackpad is on the detachable keyboard base. Let's move
the enabling of the trackpad i2c bus out of the base sc7180-trogdor.dtsi
file so that each trogdor board that is detachable, of which there are
many, doesn't have to disable the trackpad bus.
Cc: "Joseph S. Barrera III" <joebar@chromium.org>
Cc: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220427020339.360855-2-swboyd@chromium.org
Some trogdor boards have on-board regulators for the MIPI camera
components. Add nodes describing these regulators so boards with these
supplies can consume them.
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211216044529.733652-1-swboyd@chromium.org
Factor out ti-sn65dsi86 edp bridge as a separate dts fragment.
This helps us introduce the second source edp bridge later.
Signed-off-by: Philip Chen <philipchen@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211008113839.v3.1.Ibada67e75d2982157e64164f1d11715d46cdc42c@changeid
The sc7180's dynamic-power-coefficient violates the device tree bindings.
The bindings (arm/cpus.yaml) say that the units for the
dynamic-power-coefficient are supposed to be "uW/MHz/V^2". The ones for
sc7180 aren't this. Qualcomm arbitrarily picked 100 for the "little" CPUs
and then picked a number for the big CPU based on this.
At the time, there was a giant dicussion about this. Apparently Qualcomm
Engineers were instructed not to share the actual numbers here. As part
of the discussion, I pointed out [1] that these numbers shouldn't really
be secret since once a device is shipping anyone can just run a script
and produce them. This patch is the result of running the script I posted
in that discussion on sc7180-trogdor-coachz, which is currently available
for purchase by consumers.
[1] https://lore.kernel.org/r/CAD=FV=U1FP0e3_AVHpauUUZtD-5X3XCwh5aT9fH_8S_FFML2Uw@mail.gmail.com/
I ran the script four times, measuring little, big, little, big. I used
the 64-bit version of dhrystone 2.2 in my test. I got these results:
576 kHz, 596 mV, 20 mW, 88 Cx
768 kHz, 596 mV, 32 mW, 122 Cx
1017 kHz, 660 mV, 45 mW, 97 Cx
1248 kHz, 720 mV, 87 mW, 139 Cx
1324 kHz, 756 mV, 109 mW, 148 Cx
1516 kHz, 828 mV, 150 mW, 148 Cx
1612 kHz, 884 mV, 182 mW, 147 Cx
1708 kHz, 884 mV, 192 mW, 146 Cx
1804 kHz, 884 mV, 207 mW, 149 Cx
Your dynamic-power-coefficient for cpu 0: 132
825 kHz, 596 mV, 142 mW, 401 Cx
979 kHz, 628 mV, 183 mW, 427 Cx
1113 kHz, 656 mV, 224 mW, 433 Cx
1267 kHz, 688 mV, 282 mW, 449 Cx
1555 kHz, 812 mV, 475 mW, 450 Cx
1708 kHz, 828 mV, 566 mW, 478 Cx
1843 kHz, 884 mV, 692 mW, 476 Cx
1900 kHz, 884 mV, 722 mW, 482 Cx
1996 kHz, 916 mV, 814 mW, 482 Cx
2112 kHz, 916 mV, 862 mW, 483 Cx
2208 kHz, 916 mV, 962 mW, 521 Cx
2323 kHz, 940 mV, 1060 mW, 517 Cx
2400 kHz, 956 mV, 1133 mW, 518 Cx
Your dynamic-power-coefficient for cpu 6: 471
576 kHz, 596 mV, 26 mW, 103 Cx
768 kHz, 596 mV, 40 mW, 147 Cx
1017 kHz, 660 mV, 54 mW, 114 Cx
1248 kHz, 720 mV, 97 mW, 151 Cx
1324 kHz, 756 mV, 113 mW, 150 Cx
1516 kHz, 828 mV, 154 mW, 148 Cx
1612 kHz, 884 mV, 194 mW, 155 Cx
1708 kHz, 884 mV, 203 mW, 152 Cx
1804 kHz, 884 mV, 219 mW, 155 Cx
Your dynamic-power-coefficient for cpu 0: 142
825 kHz, 596 mV, 148 mW, 530 Cx
979 kHz, 628 mV, 189 mW, 475 Cx
1113 kHz, 656 mV, 230 mW, 461 Cx
1267 kHz, 688 mV, 287 mW, 466 Cx
1555 kHz, 812 mV, 469 mW, 445 Cx
1708 kHz, 828 mV, 567 mW, 480 Cx
1843 kHz, 884 mV, 699 mW, 482 Cx
1900 kHz, 884 mV, 719 mW, 480 Cx
1996 kHz, 916 mV, 814 mW, 484 Cx
2112 kHz, 916 mV, 861 mW, 483 Cx
2208 kHz, 916 mV, 963 mW, 522 Cx
2323 kHz, 940 mV, 1063 mW, 520 Cx
2400 kHz, 956 mV, 1135 mW, 519 Cx
Your dynamic-power-coefficient for cpu 6: 489
As you can see, the calculations aren't perfectly consistent but
roughly you could say about 480 for big and 137 for little.
The ratio between these numbers isn't quite the same as the ratio
between the two numbers that Qualcomm used. Perhaps this is because
Qualcomm measured something slightly different than the 64-bit version
of dhrystone 2.2 or perhaps it's because they fudged these numbers a
bit (and fudged the capacity-dmips-mhz). As per discussion [2], let's
use the numbers I came up with and also un-fudge
capacity-dmips-mhz. While unfudging capacity-dmips-mhz, let's scale it
so that bigs are 1024 which seems to be the common practice.
In general these numbers don't need to be perfectly exact. In fact,
they can't be since the CPU power depends a lot on what's being run on
the CPU and the big/little CPUs are each more or less efficient in
different operations. Historically running the 32-bit vs. 64-bit
versions of dhrystone produced notably different numbers, though I
didn't test this time.
We also need to scale all of the sustainable-power numbers by the same
amount. I scale ones related to the big CPUs by the adjustment I made
to the big dynamic-power-coefficient and the ones related to the
little CPUs by the adjustment I made to the little
dynamic-power-coefficient.
[2] https://lore.kernel.org/r/0a865b6e-be34-6371-f9f2-9913ee1c5608@codeaurora.org/
Fixes: 71f873169a ("arm64: dts: qcom: sc7180: Add dynamic CPU power coefficients")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210902145127.v2.1.I049b30065f3c715234b6303f55d72c059c8625eb@changeid
Set audu wakeup delay to 80 ms for fixing pop noise during capture begin.
Fixes: ba5f9b5d7f ("arm64: dts: qcom: sc7180: Add wakeup delay for adau codec")
Signed-off-by: Judy Hsiao <judyhsiao@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210708090810.174767-1-judyhsiao@chromium.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add ADC and thermal monitor configuration for skin temperature,
plus a thermal zone that monitors the skin temperature and uses
the big cores as cooling devices.
CoachZ rev1 is stuffed with an incompatible thermistor for the
skin temperature, disable the thermal zone for rev1 to avoid
the use of bogus temperature values.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20210414111007.v1.1.I1a438604a79025307f177347d45815987b105cb5@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This was present downstream. Add upstream too. NOTE: upstream I
managed to get some sort of halfway state and got one pinctrl entry in
the coachz-r1 device tree. Remove that as part of this since it's now
in the dtsi.
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Cc: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
Cc: Ajit Pandey <ajitp@codeaurora.org>
Cc: Judy Hsiao <judyhsiao@chromium.org>
Cc: Cheng-Yi Chiang <cychiang@chromium.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20210315133924.v2.1.I601a051cad7cfd0923e55b69ef7e5748910a6096@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This is a trgodor variant, required to have sound node variable
for coachz specific platform.
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20210314061054.19451-3-srivasam@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This is a trogdor variant. This is mostly a grab from the downstream
tree with notable exceptions:
- I skip -rev0. This was a super early build and there's no advantage
of long term support.
- I remove sound node since sound hasn't landed upstream yet.
Cc: Gwendal Grignou <gwendal@chromium.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Tzung-Bi Shih <tzungbi@chromium.org>
Cc: Judy Hsiao <judyhsiao@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210301133318.v2.13.I3d1f5f8a3bf31e8014229df0d4cfdff20e9cc90f@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
