Update the lpassaudio node to support the new compatible as the
lpassaudio needs to support the reset functionality on the
QCM6490 IDP board and the rest of the Audio functionality would be
provided from the LPASS firmware.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Link: https://lore.kernel.org/r/20250221-lpass_qcm6490_resets-v5-3-6be0c0949a83@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The property qcom,ath11k-calibration-variant was deprecated in favor of
recently introduced generic qcom,calibration-variant, common to all
Qualcomm Atheros WiFi bindings.
Change will affect out of tree users, like other projects, of this DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250225-dts-qcom-wifi-calibration-v1-10-347e9c72dcfc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The UFS driver expects to be able to set load (and by extension, mode)
on its supply regulators. Add the necessary properties to make that
possible.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rakesh Kota <quic_kotarake@quicinc.com>
Link: https://lore.kernel.org/r/20241017122858.3664474-1-quic_kotarake@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On SC7280 and derivative platforms GPU by default requires a signed
binary, a660_zap.mbn. Disable GPU by default and enable it only when
the binary is actually available (QCM6490-IDP, RB3gen2). ChromeOS
devices do not use TrustZone, so GPU can be enabled by default in
sc7280-chrome-common.dtsi. FairPhone5 and SHIFTphone8 DTS already
enable GPU (even though it wasn't required beforehand).
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konradybcio@kernel.org>
Link: https://lore.kernel.org/r/20240907-rb3g2-fixes-v1-2-eb9da98e9f80@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
For IDP variant, GPIO 20/21 is used by camera use case and camera
driver is not able acquire these GPIOs as it is acquired by UART5
driver as RTS/CTS pin.
UART5 is designed for debug UART for all the board variants of the
sc7280 chipset and RTS/CTS configuration is not required for debug
uart usecase.
Remove CTS/RTS configuration for UART5 instance and change compatible
string to debug UART.
Remove overwriting compatible property from individual target specific
file as it is not required.
Fixes: 38cd93f413 ("arm64: dts: qcom: sc7280: Update QUPv3 UART5 DT node")
Signed-off-by: Viken Dadhaniya <quic_vdadhani@quicinc.com>
Link: https://lore.kernel.org/r/20240424075853.11445-1-quic_vdadhani@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The usb-role-switch property doesn't make sense for the USB hosts which
are fixed to either host or peripheral USB data mode. Delete
usb-role-switch property being present in SoC dtsi.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240429-usb-link-dtsi-v1-11-87c341b55cdf@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Without explicitly specifying names for the regulators they are named
based on the DeviceTree node name. This results in multiple regulators
with the same name, making it impossible to reason debug prints and
regulator_summary.
Signed-off-by: Umang Chheda <quic_uchheda@quicinc.com>
Link: https://lore.kernel.org/r/20240412123237.2633000-1-quic_uchheda@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The Volume Down & Power buttons are controlled by the PMIC via
the PON hardware, and the Volume Up is connected to a PMIC gpio.
Enable the necessary hardware and setup the GPIO state for the
Volume Up gpio key.
Signed-off-by: Hui Liu <quic_huliu@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240311-gpio-keys-v5-1-08823582f6c9@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Underscores should not be used in node names (dtc with W=2 warns about
them), so replace them with hyphens.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240213145124.342514-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Min and max voltages for vph_pwr should be same, otherwise rpmh
will not probe, so correcting the min and max voltages for vph_pwr.
Fixes: 9af6a9f32a ("arm64: dts: qcom: Add base qcm6490 idp board dts")
Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231220110015.25378-2-quic_kbajaj@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add definition for three LEDs to make sure they can
be enabled base on QCOM LPG LED driver.
Signed-off-by: Hui Liu <quic_huliu@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240126-lpg-v6-1-f879cecbce69@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
It appears that all SC7280-based devices so far have mpss_mem and
wpss_mem on the same reg with the same size.
Also these memory regions are referenced already in sc7280.dtsi so
that's where they should also be defined.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20231208-sc7280-remoteprocs-v3-4-6aa394d33edf@fairphone.com
[bjorn: delete-node &wpss_mem in qcs6490 rb3gen2, and qcm6490 idp]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the node for the ADSP found on the SC7280 SoC, using standard
Qualcomm firmware.
Remove the reserved-memory node from sc7280-chrome-common since CDSP is
currently not used there.
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20231208-sc7280-remoteprocs-v3-9-6aa394d33edf@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add DTS for Qualcomm IDP platform using QCM6490 SoC.
This adds debug uart, eMMC and usb support along with
regulators found on this board.
Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Link: https://lore.kernel.org/r/20231129065816.26409-3-quic_kbajaj@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
